git.openwrt.org Git - openwrt/staging/blogic.git/log

RDMA/core: Fix -Wunused-const-variable warnings

The commit below introduced a few compilation warnings.

In file included from ./include/rdma/ib_verbs.h:64,
                 from ./include/linux/mlx5/device.h:37,
                 from ./include/linux/mlx5/driver.h:51,
                 from drivers/net/ethernet/mellanox/mlx5/core/uar.c:36:
./include/linux/dim.h:378:1: warning: 'rdma_dim_prof' defined but not
used [-Wunused-const-variable=]
rdma_dim_prof[RDMA_DIM_PARAMS_NUM_PROFILES] = {
^~~~~~~~~~~~~
In file included from ./include/rdma/ib_verbs.h:64,
                 from ./include/linux/mlx5/device.h:37,
                 from ./include/linux/mlx5/driver.h:51,
                 from
drivers/net/ethernet/mellanox/mlx5/core/pagealloc.c:37:
./include/linux/dim.h:378:1: warning: 'rdma_dim_prof' defined but not
used [-Wunused-const-variable=]
rdma_dim_prof[RDMA_DIM_PARAMS_NUM_PROFILES] = {
^~~~~~~~~~~~~

Since only ib_cq_rdma_dim_work() in drivers/infiniband/core/cq.c uses it,
just move the definition over there.

Fixes: f4915455dcf0 ("linux/dim: Implement RDMA adaptive moderation (DIM)")
Signed-off-by: Qian Cai <cai@lca.pw>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rdma/siw: Remove set but not used variable 's'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/infiniband/sw/siw/siw_cm.c: In function siw_cm_llp_state_change:
drivers/infiniband/sw/siw/siw_cm.c:1278:17: warning: variable s set but not used [-Wunused-but-set-variable]

Fixes: 6c52fdc244b5 ("rdma/siw: connection management")
Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rdma/siw: Add missing dependencies on LIBCRC32C and DMA_VIRT_OPS

If LIBCRC32C and DMA_VIRT_OPS are not enabled:

    drivers/infiniband/sw/siw/siw_main.o: In function `siw_newlink':
    siw_main.c:(.text+0x35c): undefined reference to `dma_virt_ops'
    drivers/infiniband/sw/siw/siw_qp_rx.o: In function `siw_csum_update':
    siw_qp_rx.c:(.text+0x16): undefined reference to `crc32c'

Fix the first issue by adding a select of DMA_VIRT_OPS.  Fix the second
issue by replacing the unneeded dependency on CRYPTO_CRC32 by a dependency
on LIBCRC32C.

Reported-by: noreply@ellerman.id.au (first issue)
Fixes: c0cf5bdde46c ("rdma/siw: addition to kernel build environment")
Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/siw: Add missing rtnl_lock around access to ifa

ifa is protected by rcu or rtnl, add the missing locking. In this case we
have to use rtnl since siw_listen_address() is sleeping.

Fixes: 6c52fdc244b5 ("rdma/siw: connection management")
Reviewed-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rdma/siw: Use proper enumerated type in map_cqe_status

clang warns several times:

drivers/infiniband/sw/siw/siw_cq.c:31:4: warning: implicit conversion
from enumeration type 'enum siw_wc_status' to different enumeration type
'enum siw_opcode' [-Wenum-conversion]
{ SIW_WC_SUCCESS, IB_WC_SUCCESS },
~ ^~~~~~~~~~~~~~

Fixes: b0fff7317bb4 ("rdma/siw: completion queue methods")
Link: https://github.com/ClangBuiltLinux/linux/issues/596
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/siw: Remove unnecessary kthread create/destroy printouts

There is already a warning if we cannot start any thread, and stopping
those threads is not worth spamming the console.

This also corrects a warning from gcc:

drivers/infiniband/sw/siw/siw_main.c: In function 'siw_create_tx_threads':
drivers/infiniband/sw/siw/siw_main.c:91:11: warning:
variable 'rv' set but not used [-Wunused-but-set-variable]

Reported-by: Hulk Robot <hulkci@huawei.com>
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/rdmavt: Fix variable shadowing issue in rvt_create_cq

clang warns:

drivers/infiniband/sw/rdmavt/cq.c:260:7: warning: variable 'err' is used
uninitialized whenever 'if' condition is true
[-Wsometimes-uninitialized]
                if (err)
                    ^~~
drivers/infiniband/sw/rdmavt/cq.c:310:9: note: uninitialized use occurs
here
        return err;
               ^~~
drivers/infiniband/sw/rdmavt/cq.c:260:3: note: remove the 'if' if its
condition is always false
                if (err)
                ^~~~~~~~
drivers/infiniband/sw/rdmavt/cq.c:253:7: warning: variable 'err' is used
uninitialized whenever 'if' condition is true
[-Wsometimes-uninitialized]
                if (!cq->ip) {
                    ^~~~~~~
drivers/infiniband/sw/rdmavt/cq.c:310:9: note: uninitialized use occurs
here
        return err;
               ^~~
drivers/infiniband/sw/rdmavt/cq.c:253:3: note: remove the 'if' if its
condition is always false
                if (!cq->ip) {
                ^~~~~~~~~~~~~~
drivers/infiniband/sw/rdmavt/cq.c:211:9: note: initialize the variable
'err' to silence this warning
        int err;
               ^
                = 0
2 warnings generated.

The function scoped err variable is uninitialized when the flow jumps into
the if statement. The if scoped err variable shadows the function scoped
err variable, preventing the err assignments within the if statement to be
reflected at the function level, which will cause uninitialized use when
the goto statements are taken.

Just remove the if scoped err declaration so that there is only one copy
of the err variable for this function.

Fixes: 239b0e52d8aa ("IB/hfi1: Move rvt_cq_wc struct into uapi directory")
Link: https://github.com/ClangBuiltLinux/linux/issues/594
Reviewed-by: Nick Desaulniers <ndesaulniers@google.com>
Signed-off-by: Nathan Chancellor <natechancellor@gmail.com>
Acked-by: Mike Marciniszyn <mike.marciniszyn@intel.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Fix race when resolving IP address

Use the neighbour lock when copying the MAC address from the neighbour
data struct in dst_fetch_ha.

When not using the lock, it is possible for the function to race with
neigh_update(), causing it to copy an torn MAC address:

rdma_resolve_addr()
  rdma_resolve_ip()
    addr_resolve()
      addr_resolve_neigh()
        fetch_ha()
          dst_fetch_ha()
     memcpy(dev_addr->dst_dev_addr, n->ha, MAX_ADDR_LEN)

and

net_ioctl()
  arp_ioctl()
    arp_rec_delete()
      arp_invalidate()
        neigh_update()
          __neigh_update()
    memcpy(&neigh->ha, lladdr, dev->addr_len)

It is possible to provoke this error by calling rdma_resolve_addr() in a
tight loop, while deleting the corresponding ARP entry in another tight
loop.

Fixes: 51d45974515c ("infiniband: addr: Consolidate code to fetch neighbour hardware address from dst.")
Signed-off-by: Dag Moxnes <dag.moxnes@oracle.com>
Signed-off-by: Håkon Bugge <haakon.bugge@oracle.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Make rdma_counter.h compile stand alone

5.4-rc1 will have new compile time debugging to test that headers can be
compiled stand alone. Many rdma headers are already broken and excluded
from the mechanism, however to avoid compile failures during the merge
window fix enough so that the newly added header compiles clean.

Fixes: 413d3347503b ("RDMA/counter: Add set/clear per-port auto mode support")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Mark Zhang <markz@mellanox.com>

IB/core: Work on the caller socket net namespace in nldev_newlink()

While creating new RDMA devices based on netdevice name, consider the net
namespace of the caller skb's socket similar to rest of the doit()
callbacks and nldev_dellink() which deletes the RDMA device created using
nldev_newlink().

Fixes: 3856ec4b93c94 ("RDMA/core: Add RDMA_NLDEV_CMD_NEWLINK/DELLINK support")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rxe: Fill in wc byte_len with IB_WC_RECV_RDMA_WITH_IMM

Calculate the correct byte_len on the receiving side when a work
completion is generated with IB_WC_RECV_RDMA_WITH_IMM opcode.

According to the IBA byte_len must indicate the number of written bytes,
whereas it was always equal to zero for the IB_WC_RECV_RDMA_WITH_IMM
opcode, even though data was transferred.

Fixes: 8700e3e7c485 ("Soft RoCE driver")
Signed-off-by: Konstantin Taranov <konstantin.taranov@inf.ethz.ch>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/mlx5: Set RDMA DIM to be enabled by default

Enable RDMA DIM by default for better user experience.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/nldev: Added configuration of RDMA dynamic interrupt moderation to netlink

Added parameter in ib_device for enabling dynamic interrupt moderation so
that it can be configured in userspace using rdma tool.

In order to set adaptive-moderation for an ib device the command is:
rdma dev set [DEV] adaptive-moderation [on|off]
Please set on/off.

rdma dev show
0: mlx5_0: node_type ca fw 16.26.0055 node_guid 248a:0703:00a5:29d0
sys_image_guid 248a:0703:00a5:29d0 adaptive-moderation on

rdma resource show cq
dev mlx5_0 cqn 0 cqe 1023 users 4 poll-ctx UNBOUND_WORKQUEUE
adaptive-moderation off comm [ib_core]

Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

linux/dim: Implement RDMA adaptive moderation (DIM)

RDMA DIM implements a different algorithm from net DIM and is based on
completions which is how we can implement interrupt moderation in RDMA.

The algorithm optimizes for number of completions and ratio between
completions and events. In order to avoid long latencies, the
implementation performs fast reduction of moderation level when the
traffic changes.

Signed-off-by: Yamin Friedman <yaminf@mellanox.com>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Merge tag 'blk-dim-v2' into rdma.git for-next

Generic DIM

From: Tal Gilboa and Yamin Fridman

Implement net DIM over a generic DIM library, add RDMA DIM

dim.h lib exposes an implementation of the DIM algorithm for
dynamically-tuned interrupt moderation for networking interfaces.

We want a similar functionality for other protocols, which might need to
optimize interrupts differently. Main motivation here is DIM for NVMf
storage protocol.

Current DIM implementation prioritizes reducing interrupt overhead over
latency. Also, in order to reduce DIM's own overhead, the algorithm might
take some time to identify it needs to change profiles. While this is
acceptable for networking, it might not work well on other scenarios.

Here we propose a new structure to DIM. The idea is to allow a slightly
modified functionality without the risk of breaking Net DIM behavior for
netdev. We verified there are no degradations in current DIM behavior with
the modified solution.

Suggested solution:
- Common logic is implemented in lib/dim/dim.c
- Net DIM (existing) logic is implemented in lib/dim/net_dim.c, which uses
  the common logic in dim.c
- Any new DIM logic will be implemented in "lib/dim/new_dim.c".
  This new implementation will expose modified versions of profiles,
  dim_step() and dim_decision().
- DIM API is declared in include/linux/dim.h for all implementations.

Pros for this solution are:
- Zero impact on existing net_dim implementation and usage
- Relatively more code reuse (compared to two separate solutions)
- Increased extensibility

Required for dependencies in the next series.

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Report correctly tag matching rendezvous capability

Userspace expects the IB_TM_CAP_RC bit to indicate that the device
supports RC transport tag matching with rendezvous offload. However the
firmware splits this into two capabilities for eager and rendezvous tag
matching.

Only if the FW supports both modes should userspace be told the tag
matching capability is available.

Cc: <stable@vger.kernel.org> # 4.13
Fixes: eb761894351d ("IB/mlx5: Fill XRQ capabilities")
Signed-off-by: Danit Goldberg <danitg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Reviewed-by: Artemy Kovalyov <artemyko@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

docs: infiniband: add it to the driver-api bookset

While this contains some uAPI stuff, it was intended to be read by a
kernel doc. So, let's not move it to a different dir, but, instead, just
add it to the driver-api bookset.

Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Merge branch 'vhca-tunnel' into rdma.git for-next

Max Gurtovoy says:

====================
Those two patches introduce VHCA tunnel mechanism to DEVX interface
needed for Bluefield SOC. See extensive commit messages for more
information.
====================

Based on the mlx5-next branch from
git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux for
dependencies

* branch 'vcha-tunnel':
IB/mlx5: Implement VHCA tunnel mechanism in DEVX
net/mlx5: Introduce VHCA tunnel device capability

IB/mlx5: Implement VHCA tunnel mechanism in DEVX

This mechanism will allow function-A to perform operations "on behalf" of
function-B via tunnel object. Function-A will have privileges for creating
and using this tunnel object.

For example, in the device emulation feature presented in Bluefield-1 SoC,
using device emulation capability, one can present NVMe function to the
host OS.

Since the NVMe function doesn't have a normal command interface to the HCA
HW, here is a need to create a channel that will be able to issue commands
"on behalf" of this function.

This channel is the VHCA_TUNNEL general object. The emulation software
will create this tunnel for every managed function and issue commands via
devx general cmd interface using the appropriate tunnel ID. When devX
context will receive a command with non-zero vhca_tunnel_id, it will pass
the command as-is down to the HCA.

All the validation, security and resource tracking of the commands and the
created tunneled objects is in the responsibility of the HCA FW. When a
VHCA_TUNNEL object destroyed, the device will issue an internal
FLR (function level reset) to the emulated function associated with this
tunnel. This will destroy all the created resources using the tunnel
mechanism.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/rvt: Do not use a kernel header in the ABI

rvt was using ib_sge as part of it's ABI, which is not allowed. Introduce
a new struct with the same layout and use it instead.

Fixes: dabac6e460ce ("IB/hfi1: Move receive work queue struct into uapi directory")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/siw: Fix DEFINE_PER_CPU compilation when ARCH_NEEDS_WEAK_PER_CPU

The initializer for the variable cannot be inside the macro (and zero
initialization isn't needed anyhow).

include/linux/percpu-defs.h:92:33: warning: '__pcpu_unique_use_cnt' initialized and declared 'extern'
  extern __PCPU_DUMMY_ATTRS char __pcpu_unique_##name;  \
                                 ^~~~~~~~~~~~~~
include/linux/percpu-defs.h:115:2: note: in expansion of macro 'DEFINE_PER_CPU_SECTION'
  DEFINE_PER_CPU_SECTION(type, name, "")
  ^~~~~~~~~~~~~~~~~~~~~~
drivers/infiniband/sw/siw/siw_main.c:129:8: note: in expansion of macro 'DEFINE_PER_CPU'
static DEFINE_PER_CPU(atomic_t, use_cnt = ATOMIC_INIT(0));
        ^~~~~~~~~~~~~~

Also the rules for PER_CPU require the variable names to be globally
unique, so prefix them with siw_

Fixes: b9be6f18cf9e ("rdma/siw: transmit path")
Fixes: bdcf26bf9b3a ("rdma/siw: network and RDMA core interface")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

ibverbs/rxe: Remove variable self-initialization

In some cases (not in this particular one) variable self-initialization
can lead to undefined behavior. In this case, it is just obscure code.

Signed-off-by: Maksym Planeta <mplaneta@os.inf.tu-dresden.de>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Clean up unnecessary variable initialization

Here Clean up unnecessary initial value for some variable.

Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Fixs hw access invalid dma memory error

When smmu is enable, if execute the perftest command and then use 'kill
-9' to exit, follow this operation repeatedly, the kernel will have a high
probability to print the following smmu event:

  arm-smmu-v3 arm-smmu-v3.1.auto: event 0x10 received:
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00007d0000000010
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x0000020900000080
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00000000f47cf000
  arm-smmu-v3 arm-smmu-v3.1.auto:  0x00000000f47cf000

This is because the hw will periodically refresh the qpc cache until the
next reset.

This patch fixed it by removing the action that release qpc memory in the
'hns_roce_qp_free' function.

Fixes: 9a4435375cd1 ("IB/hns: Add driver files for hns RoCE driver")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Use %pK format pointer print

The format specifier \"%p\" can leak kernel addresses. Use \"%pK\"
instead.

Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Bugfix for calculating qp buffer size

The buffer size of qp which used to allocate qp buffer space for storing
sqwqe and rqwqe will be the length of buffer space. The kernel driver will
use the buffer address and the same size to get the user memory. The same
size named buff_size of qp. According the algorithm of calculating, The
size of the two is not equal when users set the max sge of sq.

Fixes: b28ca7cceff8 ("RDMA/hns: Limit extend sq sge num")
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

net/mlx5: Introduce VHCA tunnel device capability

When using the device emulation feature (introduced in Bluefield-1 SOC),
a privileged function (the device emulation manager) will be able to
create a channel to execute commands on behalf of the emulated function.

This channel will be a general object of type VHCA_TUNNEL that will have
a unique ID for each emulated function. This ID will be passed in each
cmd that will be issued by the emulation SW in a well known offset in
the command header.

This channel is needed since the emulated function doesn't have a normal
command interface to the HCA HW, but some basic configuration for that
function is needed (e.g. initialize and enable the HCA). For that matter,
a specific command-set was defined and only those commands will be issued
by the HCA.

Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

RDMA/hns: Set reset flag when hw resetting

When hw resetting, there is no response from hw when driver sending cmdq.
If driver still send cmdq to hw, the reset process may be blocked. So
reset flag should be set to intercept the cmdq command when driver
receiving "notify down" signal.

Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Modify ba page size for cqe

Currently, the depth of cq only supports 64K. According to the UM, the
depth of cq is up to 4M, Therefore the ba page size of cqe was modified to
support the maximum specification of cq depth.

Signed-off-by: Yangyang Li <liyangyang20@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Fixup qp release bug

Hip06 reserve 12 qps, Hip08 reserve 8 qps. When the QP is released, the
chip model is not judged, and the Hip08 cannot release the qpn 8~12

Signed-off-by: Lang Cheng <chenglang@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Bugfix for cleaning mtr

It uses hns_roce_mtr_init in hns_roce_create_qp_common function. As a
result, it should use hns_roce_mtr_cleanup function for cleaning mtr when
destroying qp.

Fixes: 8d18ad83f19b ("RDMA/hns: Fix bug when wqe num is larger than 16K")
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/nldev: Allow get default counter statistics through RDMA netlink

This patch adds the ability to return the hwstats of per-port default
counters (which can also be queried through sysfs nodes).

Signed-off-by: Mark Zhang <markz@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/nldev: Allow get counter mode through RDMA netlink

Provide an option to get current counter mode through RDMA netlink.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/nldev: Allow counter manual mode configration through RDMA netlink

Provide an option to allow users to manually bind a qp with a counter
through RDMA netlink. Limit it to users with ADMIN capability only.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/counter: Allow manual mode configuration support

In manual mode a QP is bound to a counter manually. If counter is not
specified then a new one will be allocated.

Manual mode is enabled when user binds a QP, and disabled when the last
manually bound QP is unbound.

When auto-mode is turned off and there are counters left, manual mode is
enabled so that the user is able to access these counters.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/core: Get sum value of all counters when perform a sysfs stat read

Since a QP can only be bound to one counter, then if it is bound to a
separate counter, for backward compatibility purpose, the statistic value
must be:
* stat of default counter
+ stat of all running allocated counters
+ stat of all deallocated counters (history stats)

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Add counter_alloc_stats() and counter_update_stats() support

Add support for ib callback counter_alloc_stats() and
counter_update_stats().

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/netlink: Implement counter dumpit calback

This patch adds the ability to return all available counters together with
their properties and hwstats.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/nldev: Allow counter auto mode configration through RDMA netlink

Provide an option to enable/disable per-port counter auto mode through
RDMA netlink. Limit it to users with ADMIN capability only.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Support statistic q counter configuration

Add support for ib callbacks counter_bind_qp(), counter_unbind_qp() and
counter_dealloc().

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Add counter set id as a parameter for mlx5_ib_query_q_counters()

Add counter set id as a parameter so that this API can be used for
querying any q counter.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Support set qp counter

Support bind a qp with counter. If counter is null then bind the qp to the
default counter. Different QP state has different operation:

- RESET: Set the counter field so that it will take effective during
  RST2INIT change;
- RTS: Issue an RTS2RTS change to update the QP counter;
- Other: Set the counter field and mark the counter_pending flag, when QP
  is moved to RTS state and this flag is set, then issue an RTS2RTS
  modification to update the counter.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/counter: Add "auto" configuration mode support

In auto mode all QPs belong to one category are bind automatically to a
single counter set. Currently only "qp type" is supported.

In this mode the qp counter is set in RST2INIT modification, and when a qp
is destroyed the counter is unbound.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/counter: Add set/clear per-port auto mode support

Add an API to support set/clear per-port auto mode.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/restrack: Make is_visible_in_pid_ns() as an API

Remove is_visible_in_pid_ns() from nldev.c and make it as a restrack API,
so that it can be taken advantage by other parts like counter.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/restrack: Add an API to attach a task to a resource

Add rdma_restrack_attach_task() which is able to attach a task other then
"current" to a resource.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/restrack: Introduce statistic counter

Introduce statistic counter as a new resource. It allows a user to monitor
specific objects (e.g., QPs) by binding to a counter.

In some cases a user counter resource is created with task other then
"current", because its creation is done as part of rdmatool call.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Merge mlx5-next into rdma for-next

From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

Required for dependencies in the next patches.

* mlx5-next:
  net/mlx5: Add rts2rts_qp_counters_set_id field in hca cap
  net/mlx5: Properly name the generic WQE control field
  net/mlx5: Introduce TLS TX offload hardware bits and structures
  net/mlx5: Refactor mlx5_esw_query_functions for modularity
  net/mlx5: E-Switch prepare functions change handler to be modular
  net/mlx5: Introduce and use mlx5_eswitch_get_total_vports()

net/mlx5: Add rts2rts_qp_counters_set_id field in hca cap

Add rts2rts_qp_counters_set_id field in hca cap so that RTS2RTS
qp modification can be used to change the counter of a QP.

Signed-off-by: Mark Zhang <markz@mellanox.com>
Reviewed-by: Majd Dibbiny <majd@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

RDMA/efa: Entropy in admin commands id

Make admin commands id easier to distinguish by using relevant bits from
the producer counter.
This allows us to differentiate admin commands with the same producer
index (happens after admin queue overlap), which is helpful when
debugging.

Signed-off-by: Daniel Kranzdorf <dkkranzd@amazon.com>
Reviewed-by: Firas JahJah <firasj@amazon.com>
Reviewed-by: Yossi Leybovich <sleybo@amazon.com>
Signed-off-by: Gal Pressman <galpress@amazon.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/ipoib: Add child to parent list only if device initialized

Despite failure in ipoib_dev_init() we continue with initialization flow
and creation of child device. It causes to the situation where this child
device is added too early to parent device list.

Change the logic, so in case of failure we properly return error from
ipoib_dev_init() and add child only in success path.

Fixes: eaeb39842508 ("IB/ipoib: Move init code to ndo_init")
Signed-off-by: Valentine Fatiev <valentinef@mellanox.com>
Reviewed-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/mlx5: Use proper allocation API to get zeroed memory

There is no need in custom memory zeroing, because it can be done
by using kzalloc from the beginning.

Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/uverbs: remove redundant assignment to variable ret

The variable ret is being initialized with a value that is never read and
it is being updated later with a new value. The initialization is
redundant and can be removed.

Addresses-Coverity: ("Unused value")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/hns: Fix building modular hns

The patch below wasn't fully tested for all combinations of module and
configs, and causes a compile failure:

WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_ah.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_alloc.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_cmd.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_cq.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_db.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_hem.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_mr.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_pd.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_qp.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_restrack.o
see include/linux/module.h for more information
WARNING: modpost: missing MODULE_LICENSE() in drivers/infiniband/hw/hns/hns_roce_srq.o
see include/linux/module.h for more information
ERROR: "hns_roce_bitmap_cleanup" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_bitmap_init" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_free_cmd_mailbox" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_alloc_cmd_mailbox" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_table_get" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_bitmap_alloc" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!
ERROR: "hns_roce_table_find" [drivers/infiniband/hw/hns/hns_roce_srq.ko] undefined!

The fix is to put the module sub components in the right line.

Fixes: e9816ddf2a33 ("RDMA/hns: Cleanup unnecessary exported symbols")
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Xi Wang <wangxi11@huawei.com>
Signed-off-by: Lijun Ou <oulijun@huawei.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: DEVX cleanup mdev

No need any more to hold mlx5_core_dev on the devx_object, it can be
accessed from ib_dev.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Add DEVX support for CQ events

Add DEVX support for CQ events by creating and destroying the CQ via
mlx5_core and set an handler to manage its completions.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Implement DEVX dispatching event

Implement DEVX dispatching event by looking up for the applicable
subscriptions for the reported event and using their target fd to
signal/set the event.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Enable subscription for device events over DEVX

Enable subscription for device events over DEVX.

Each subscription is added to the two level xarray data structure
according to its event number and the DEVX object information in case was
given with the given target fd.

Those events will be reported over the given fd once will occur.
Downstream patches will mange the dispatching to any subscription.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Register DEVX with mlx5_core to get async events

Register DEVX with with mlx5_core to get async events. This will enable
to dispatch the applicable events to its consumers in down stream patches.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Introduce MLX5_IB_OBJECT_DEVX_ASYNC_EVENT_FD

Introduce MLX5_IB_OBJECT_DEVX_ASYNC_EVENT_FD and its initial
implementation.

This object is from type class FD and will be used to read DEVX
async events.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

net/mlx5: Properly name the generic WQE control field

A generic WQE control field is used for different purposes
in different cases.
Use union to allow using the proper name in each case.

Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Introduce TLS TX offload hardware bits and structures

Add TLS offload related IFC structs, layouts and enumerations.

Signed-off-by: Eran Ben Elisha <eranbe@mellanox.com>
Signed-off-by: Tariq Toukan <tariqt@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Refactor mlx5_esw_query_functions for modularity

Functions change event output data size changes when functions other
than VFs will be enabled in HCA CAP.
With current API, multiple callers needs to align, calculate accurate
size of the output data depending on number on non VF functions enabled
in the device.
Instead of duplicating such math at multiple places, refactor
mlx5_esw_query_functions() to return raw output allocated by itself.

Caller must free the allocated memory using kvfree() as described in the
function comment section.
This hides calcuation within mlx5_esw_query_functions() and provides
simpler API.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: E-Switch prepare functions change handler to be modular

Eswitch function change handler will service multiple type of events for
VFs and non VF functions update.
Hence, introduce and use the helper function
esw_vfs_changed_event_handler() for handling change in num VFs to improve
the code readability.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Introduce and use mlx5_eswitch_get_total_vports()

Instead MLX5_TOTAL_VPORTS, use mlx5_eswitch_get_total_vports().
mlx5_eswitch_get_total_vports() in subsequent patch accounts for SF
vports as well.
Expanding MLX5_TOTAL_VPORTS macro would require exposing SF internals to
more generic vport.h header file. Such exposure is not desired.
Hence a mlx5_eswitch_get_total_vports() is introduced.

Given that mlx5_eswitch_get_total_vports() API wants to work on const
mlx5_core_dev*, change its helper functions also to accept const *dev.

Signed-off-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

Merge mlx5-next into rdma for-next

From git://git.kernel.org/pub/scm/linux/kernel/git/mellanox/linux

Required for dependencies in the next patches.

Resolved the conflicts:
- esw_destroy_offloads_acl_tables() use the newer mlx5_esw_for_all_vports()
   version
- esw_offloads_steering_init() drop the cap test
- esw_offloads_init() drop the extra function arguments

* branch 'mlx5-next': (39 commits)
  net/mlx5: Expose device definitions for object events
  net/mlx5: Report EQE data upon CQ completion
  net/mlx5: Report a CQ error event only when a handler was set
  net/mlx5: mlx5_core_create_cq() enhancements
  net/mlx5: Expose the API to register for ANY event
  net/mlx5: Use event mask based on device capabilities
  net/mlx5: Fix mlx5_core_destroy_cq() error flow
  net/mlx5: E-Switch, Handle UC address change in switchdev mode
  net/mlx5: E-Switch, Consider host PF for inline mode and vlan pop
  net/mlx5: E-Switch, Use iterator for vlan and min-inline setups
  net/mlx5: E-Switch, Reg/unreg function changed event at correct stage
  net/mlx5: E-Switch, Consolidate eswitch function number of VFs
  net/mlx5: E-Switch, Refactor eswitch SR-IOV interface
  net/mlx5: Handle host PF vport mac/guid for ECPF
  net/mlx5: E-Switch, Use correct flags when configuring vlan
  net/mlx5: Reduce dependency on enabled_vfs counter and num_vfs
  net/mlx5: Don't handle VF func change if host PF is disabled
  net/mlx5: Limit scope of mlx5_get_next_phys_dev() to PCI PF devices
  net/mlx5: Move pci status reg access mutex to mlx5_pci_init
  net/mlx5: Rename mlx5_pci_dev_type to mlx5_coredev_type
  ...

Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/mlx5: Fixed reporting counters on 2nd port for Dual port RoCE

Currently during dual port IB device registration in below code flow,

ib_register_device()
  ib_device_register_sysfs()
    ib_setup_port_attrs()
      add_port()
        get_counter_table()
          get_perf_mad()
            process_mad()
              mlx5_ib_process_mad()

mlx5_ib_process_mad() fails on 2nd port when both the ports are not fully
setup at the device level (because 2nd port is unaffiliated).

As a result, get_perf_mad() registers different PMA counter group for 1st
and 2nd port, namely pma_counter_ext and pma_counter. However both ports
have the same capability and counter offsets.

Due to this when counters are read by the user via sysfs in below code
flow, counters are queried from wrong location from the device mainly from
PPCNT instead of VPORT counters.

show_pma_counter()
  get_perf_mad()
    process_mad()
      mlx5_ib_process_mad()
        process_pma_cmd()

This shows all zero counters for 2nd port.

To overcome this, process_pma_cmd() is invoked, and when unaffiliated port
is not yet setup during device registration phase, make the query on the
first port.  while at it, only process_pma_cmd() needs to work on the
native port number and underlying mdev, so shift the get, put calls to
where its needed inside process_pma_cmd().

Fixes: 212f2a87b74f ("IB/mlx5: Route MADs for dual port RoCE")
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Daniel Jurgens <danielj@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

net/mlx5: Expose device definitions for object events

Expose an extra device definitions for objects events.

It includes: object_type values for legacy objects and generic data
header for any other object.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

net/mlx5: Report EQE data upon CQ completion

Report EQE data upon CQ completion to let upper layers use this data.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

net/mlx5: Report a CQ error event only when a handler was set

Report a CQ error event only when a handler was set.

This enables mlx5_ib to not set a handler upon CQ creation and use some
other mechanism to get this event as of other events by the
mlx5_eq_notifier_register API.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

net/mlx5: mlx5_core_create_cq() enhancements

Enhance mlx5_core_create_cq() to get the command out buffer from the
callers to let them use the output.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

net/mlx5: Expose the API to register for ANY event

Expose the API to register for ANY event, mlx5_ib will be able to use
this functionality for its needs.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

net/mlx5: Use event mask based on device capabilities

Use the reported device capabilities for the supported user events (i.e.
affiliated and un-affiliated) to set the EQ mask.

As the event mask can be up to 256 defined by 4 entries of u64 change
the applicable code to work accordingly.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

net/mlx5: Fix mlx5_core_destroy_cq() error flow

The firmware command to destroy a CQ might fail when the object is
referenced by other object and the ref count is managed by the firmware.

To enable a second successful destruction post the first failure need to
change mlx5_eq_del_cq() to be a void function.

As an error in mlx5_eq_del_cq() is quite fatal from the option to
recover, a debug message inside it should be good enougth and it was
changed to be void.

Signed-off-by: Yishai Hadas <yishaih@mellanox.com>
Acked-by: Saeed Mahameed <saeedm@mellanox.com>
Signed-off-by: Leon Romanovsky <leonro@mellanox.com>

RDMA/hns: Remove set but not used variable 'fclr_write_fail_flag'

Fixes gcc '-Wunused-but-set-variable' warning:

drivers/infiniband/hw/hns/hns_roce_hw_v2.c: In function 'hns_roce_function_clear':
drivers/infiniband/hw/hns/hns_roce_hw_v2.c:1135:7: warning:
variable 'fclr_write_fail_flag' set but not used [-Wunused-but-set-variable]

It is never used, so can be removed.

Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Leon Romanovsky <leonro@mellanox.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

RDMA/i40iw: Set queue pair state when being queried

The API for ib_query_qp requires the driver to set qp_state and
cur_qp_state on return, add the missing sets.

Fixes: d37498417947 ("i40iw: add files for iwarp interface")
Signed-off-by: Changcheng Liu <changcheng.liu@aliyun.com>
Acked-by: Shiraz Saleem <shiraz.saleem@intel.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/i40iw: Use kmemdup rather than open coding

Use kmemdump instead of kzmalloc + memcpy.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB/ipoib: Remove memset after vzalloc in ipoib_cm.c

vzalloc has already zeroed the memory. So a memset is unneeded.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

IB: Remove unneeded memset

In commit af7ddd8a627c ("Merge tag 'dma-mapping-4.21' of
git://git.infradead.org/users/hch/dma-mapping"),
dma_alloc_coherent/dmam_alloc_coherent always zeroed the returned memory.
So the memset after a coherent allocation function is not needed.

Signed-off-by: Fuqian Huang <huangfq.daxian@gmail.com>
Reviewed-by: Jason Gunthorpe <jgg@mellanox.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

Merge branch 'siw' into rdma.git for-next

Bernard Metzler says:

====================
This patch set contributes the SoftiWarp driver rebased for latest
rdma-next. SoftiWarp (siw) implements the iWarp RDMA protocol over kernel
TCP sockets. The driver integrates with the linux-rdma framework.

A matching userlevel driver is available as PR at
https://github.com/linux-rdma/rdma-core/pull/536

Many thanks for reviewing and testing the driver, especially to Leon,
Jason, Steve, Doug, Olga, Dennis, Gal. You all helped to significantly
improve the driver over the last year.

Please find below a list of changes and comments, compared to older
versions of the siw driver.

Many thanks!
Bernard.

CHANGES:
========

v3 (this version)
-----------------

- Rebased to rdma-next

- Removed unneccessary initialization of enums in siw-abi.h

- Added comment on sizing of all work queues to power of two.

v2
-----------------

- Changed recieve path CRC calculation to compute CRC32c not
  on target buffer after placement, but on original skbuf.
  This change severely hurts performance, if CRC is switched
  on, since skb must now be walked twice. It is planned to
  work on an extension to skb_copy_bits() to fold in CRC
  computation.

- Moved debugging to using ibdev_dbg().

- Dropped detailed packet debug printing.

- Removed siw_debug.[ch] files.

- Removed resource tracking, code now relies on restrack of
  RDMA midlayer. Only object counting to enforce reported
  device limits is left in place.

- Removed all nested switch-case statements.

- Cleaned up header file #include's

- Moved CQ create/destroy to new semantics,
  where midlayer creates/destroys containing object.

- Set siw's ABI version to 1 (was 0 before)

- Removed all enum initialization where not needed.

- Fixed MAINTANERS entry for siw driver

- This version stays with the current siw specific
  management of user memory (siw_umem_get() vs.
  ib_umem_get(), etc.). This, since the current ib_umem
  implementation is less efficient for user page lookup
  on the fast path, where effciency is important for a
  SW RDMA driver.
  It is planned to contribute enhancements to the ib_umem
  framework, wich makes it suitable for SW drivers as well.

v1 (first version after v9 of siw RFC)
--------------------------------------

- Rebased to 5.2-rc1

- All IDR code got removed.

- Both MR and QP deallocation verbs now synchronously
  free the resources referenced by the RDMA mid-layer.

- IPv6 support was added.

- For compatibility with Chelsio iWarp hardware, the RX
  path was slightly reworked. It now allows packet intersection
  between tagged and untagged RDMAP operations. While not
  a defined behavior as of IETF RFC 5040/5041, some RDMA hardware
  may intersect an ongoing outbound (large) tagged message, such
  as an multisegment RDMA Read Response with sending an untagged
  message, such as an RDMA Send frame. This behavior was only
  detected in an NVMeF setup, where siw was used at target side,
  and RDMA hardware at client side (during file write). siw now
  implements two input paths for tagged and untagged messages each,
  and allows the intersected placement of both messages.

- The siw kernel abi file got renamed from siw_user.h to siw-abi.h.
====================

* branch 'siw':
  SIW addition to kernel build environment
  SIW completion queue methods
  SIW receive path
  SIW transmit path
  SIW queue pair methods
  SIW application buffer management
  SIW application interface
  SIW connection management
  SIW network and RDMA core interface
  SIW main include file
  iWarp wire packet format

rdma/siw: addition to kernel build environment

Broken up commit to add the Soft iWarp RDMA driver.

Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rdma/siw: completion queue methods

Broken up commit to add the Soft iWarp RDMA driver.

Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rdma/siw: receive path

Broken up commit to add the Soft iWarp RDMA driver.

Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rdma/siw: transmit path

Broken up commit to add the Soft iWarp RDMA driver.

Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rdma/siw: queue pair methods

Broken up commit to add the Soft iWarp RDMA driver.

Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rdma/siw: application buffer management

Broken up commit to add the Soft iWarp RDMA driver.

Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rdma/siw: application interface

Broken up commit to add the Soft iWarp RDMA driver.

Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rdma/siw: connection management

Broken up commit to add the Soft iWarp RDMA driver.

Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rdma/siw: network and RDMA core interface

Broken up commit to add the Soft iWarp RDMA driver.

Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rdma/siw: main include file

Broken up commit to add the Soft iWarp RDMA driver.

Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

rdma/siw: iWarp wire packet format

Broken up commit to add the Soft iWarp RDMA driver.

Signed-off-by: Bernard Metzler <bmt@zurich.ibm.com>
Signed-off-by: Jason Gunthorpe <jgg@mellanox.com>

net/mlx5: E-Switch, Handle UC address change in switchdev mode

When NVME device emulation mode is enabled, more than one PFs use the
same physical port. In this case, MPFS is required to program L2
addresses.

It used to rely on netdev set_rx_mode in switchdev mode, but driver
later changed to not create netdev for eswitch manager once in
switchdev mode. So, UC address event should be handled.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: E-Switch, Consider host PF for inline mode and vlan pop

When ECPF is the eswitch manager, host PF is treated like other VFs.
Driver should do the same for inline mode and vlan pop.

Add new iterators to include host PF if ECPF is the eswitch manager.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: E-Switch, Use iterator for vlan and min-inline setups

Use the defined iterators to traversal VF reps/vport. Also, rely on
num of VFs rather than the counter of enabled vports as PF will also
be enabled from ECPF side, and the counter will be different from
num of VFs.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: E-Switch, Reg/unreg function changed event at correct stage

When driver is doing eswitch mode change, it's critical to keep number
of enabled VFs unchanged. However, it can be changed on the fly once
function changed event is registered.

To remove this uncertainty, function changed event should not be
registered before all setups, and first be unregistered before all
cleanups. Wrap this functionality together with vport event handler.

Fixes: 61fc880839e6 ("net/mlx5: E-Switch, Handle representors creation in handler context")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: E-Switch, Consolidate eswitch function number of VFs

Enabled number of VFs is key for eswich manager to do flow steering
initialization and vport configurations. However, the number of
enabled VFs may come from two sources as below.

PF: num of VFs is provided by enabled SR-IOV of itself.
ECPF: num of VFs is provided by enabled SR-IOV from its peer PF. And
SR-IOV can't be enabled from ECPF itself.

Current driver handles the two cases in different stages and passing
the number of enabled VFs among a large scope of internal functions.
It is usually hard to find out where is the real number of VFs from
due to layers of argument pass-in.

This patch consolidated that number from the entry point of doing
eswitch setup, and maintained a copy so that eswitch functions can
refer to it directly.

Eswitch driver shall always use this number when referring to enabled
number of VFs, don't use other numbers such as from SR-IOV.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: E-Switch, Refactor eswitch SR-IOV interface

Devlink eswitch mode is not necessarily related to SR-IOV, e.g, ECPF
can be at offload mode when SR-IOV is not enabled.

Rename the interface and eswitch mode names to decouple from SR-IOV,
and cleanup eswitch messages accordingly.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: Handle host PF vport mac/guid for ECPF

When ECPF is eswitch manager, it has the privilege to query and
configure the mac and node guid of host PF.

While vport number of host PF is 0, the vport command should be
issued with other_vport set in this case as the cmd is issued by
ECPF vport(0xfffe).

Add a specific function to query own vport mac. Low level functions
are used by vport manager to query/modify any vport mac and node guid.

Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>

net/mlx5: E-Switch, Use correct flags when configuring vlan

Before the offending commit, vlan will be configured if either vlan
or qos is set. After the change with new set flags, function callers
should provide flags accordingly.

Fixes: e33dfe316cf3 ("net/mlx5: E-Switch, Allow fine tuning of eswitch vport push/pop vlan")
Signed-off-by: Bodong Wang <bodong@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>