Uma Shankar [Thu, 1 Nov 2018 19:10:20 +0000 (00:40 +0530)]
drm/i915/icl: Enable Plane Input CSC for YUV to RGB Conversion
Plane input CSC needs to be enabled to convert frambuffers from
YUV to RGB. This is needed for bottom 3 planes on ICL, rest of
the planes have hardcoded conversion and taken care by the legacy
code.
This patch defines the co-efficient values for YUV to RGB conversion
in BT709 and BT601 formats. It programs the coefficients and enables
the plane input csc unit in hardware.
This has been verified and tested by Maarten and the change is working
as expecpted.
v2: Addressed Maarten's and Ville's review comments and added the
coefficients in a 2D array instead of independent Macros.
v3: Added individual coefficient matrix (9 values) instead of 6
register values as per Maarten's comment. Also addresed a shift
issue with B channel coefficient.
v4: Added support for Limited Range Color Handling
v5: Fixed Matt and Maarten's review comments.
v6: Added human readable matrix values for YUV to RGB Conversion along
with just the bspec register values, as per Matt's suggestion.
v7: Refactored the code, move csc coefficient programming function to
intel_sprite.c and made it static as per Ville's review comment.
v8: Addressed Ville's review comment. Called the coefficient programming
from within the skl_program_plane and used I915_WRITE_FW instead of
I915_WRITE.
v9: Fixed Ville's review comments.
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1541099420-12419-3-git-send-email-uma.shankar@intel.com
Uma Shankar [Thu, 1 Nov 2018 19:10:19 +0000 (00:40 +0530)]
drm/i915/icl: Define Plane Input CSC Coefficient Registers
Defined the plane input csc coefficient registers and macros.
6 registers are used to program a total of 9 coefficients,
added macros to define each of them for all the planes
supporting the feature on pipes. On ICL, bottom 3 planes
have this capability.
v2: Segregated the register macro definition as separate patch
as per Maarten's suggestion.
v3: Removed a redundant 3rd Pipe register definition and
simplified the equally spaced register definition by adding an
offset as per Matt's comment.
v4: No Change
v5: Renamed the register Macro as per Matt's suggestion.
v6: No Change
v7: No Change
v8: No Change
v9: No Change
Signed-off-by: Uma Shankar <uma.shankar@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1541099420-12419-2-git-send-email-uma.shankar@intel.com
Ville Syrjälä [Thu, 25 Oct 2018 13:05:36 +0000 (16:05 +0300)]
drm/i915: Fix ilk+ watermarks when disabling pipes
We're no longer programming any watermarks when we're disabling
a pipe. That means ilk_wm_merge() & co. will keep considering
the any pipe that is getting disabled as still enabled. Thus we
either get no LP1+ watermakrs (ilk-ivb), or we get suboptimal
ones (hsw-bdw).
This seems to have been broken by commit
b6b178a77210 ("drm/i915:
Calculate ironlake intermediate watermarks correctly, v2."). Before
that we apparently had some difference between the intermediate
and optimal watermarks and so we would program the optiomal ones.
Now intermediate and optimal are identical for disabled pipes
and so we don't program either.
Fix this by programming the intermediate watermarks even for
disabled pipes. We were already doing that for skl+. We'll
leave out gmch platforms for now since those do the merging
in a different manner and should work as is. We'll want to
unify this eventually, but play it safe for now and just put
in a FIXME.
Cc: stable@vger.kernel.org
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: b6b178a77210 ("drm/i915: Calculate ironlake intermediate watermarks correctly, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025130536.29024-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com> #irc
Imre Deak [Wed, 31 Oct 2018 20:02:20 +0000 (22:02 +0200)]
drm/i915/gen9_lp: Fix DMC DC counter debugfs output
On GEN9 LP (BXT/GLK) DC6 is not supported, so don't print the counter
on those platforms. So far we did this on GLK too.
While at it warn if we forgot to adjust the printout properly for a
new platform. (Rodrigo)
Testcase: igt/pm_dc/dc6-dpms
Cc: Jyoti Yadav <jyoti.r.yadav@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031200220.11608-1-imre.deak@intel.com
Imre Deak [Fri, 2 Nov 2018 19:26:56 +0000 (21:26 +0200)]
drm/i915/icl: Configure MG DP mode for HDMI ports too
The MG DP mode needs to be configured for Type C static/fixed/legacy
HDMI ports too, the same way as it's configured for Type C
static/fixed/legacy, fix this.
Bspec: 4232, 21735
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102192656.4472-3-imre.deak@intel.com
Imre Deak [Fri, 2 Nov 2018 19:26:55 +0000 (21:26 +0200)]
drm/i915/icl: Configure MG PHY gating for HDMI ports too
The MG PHY clock gating needs to be configured for Type C
static/fixed/legacy HDMI ports the same way it's configured for Type C
static/fixed/legacy and aternate mode DP ports, fix this.
Bspec: 4232, 21735
Cc: Vandita Kulkarni <vandita.kulkarni@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Tested-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102192656.4472-2-imre.deak@intel.com
Anusha Srivatsa [Fri, 2 Nov 2018 04:14:55 +0000 (21:14 -0700)]
drm/dp/fec: DRM helper for Forward Error Correction
DP 1.4 has Forward Error Correction Support(FEC).
Add helper function to check if the sink device
supports FEC.
v2: Separate the helper and the code that uses the helper into
two separate patches. (Manasi)
v3:
- Move the code to drm_dp_helper.c (Manasi)
- change the return type, code style changes (Gaurav)
- Use drm_dp_dpcd_readb instead of drm_dp_dpcd_read. (Jani)
v4:
- Avoid aux reads everytime, instead read cached
values of dpcd register (jani)
- Move helper to drm_dp_helper.h like other dsc
helpers.(Anusha)
v5: rebased. Change the helper parameter suitably.
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Sean Paul <seanpaul@chromium.org> (For merging through
drm-intel)
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102041455.15818-2-anusha.srivatsa@intel.com
Anusha Srivatsa [Fri, 2 Nov 2018 04:14:54 +0000 (21:14 -0700)]
i915/dp/fec: Cache the FEC_CAPABLE DPCD register
Similar to DSC DPCD registers, let us cache
FEC_CAPABLE register to avoid using stale
values. With this we can avoid aux reads
everytime and instead read the cached values.
v2: Avoid using memset and array for a single
field. (Manasi,Jani)
v3: Print FEC CAPABILITY value. (Manasi)
Suggested-by: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102041455.15818-1-anusha.srivatsa@intel.com
Chris Wilson [Fri, 2 Nov 2018 16:12:09 +0000 (16:12 +0000)]
drm/i915: Mark pin flags as u64
Since the flags are being used to operate on a u64 variable, they too
need to be marked as such so that the inverses are full width (and not
zero extended on 32b kernels and bdw+).
Reported-by: Sergii Romantsov <sergii.romantsov@globallogic.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: stable@vger.kernel.org
Reviewed-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181102161232.17742-2-chris@chris-wilson.co.uk
Anusha Srivatsa [Thu, 1 Nov 2018 18:55:57 +0000 (11:55 -0700)]
drm/i915/fia: FIA registers offset implementation.
The registers DPCSSS,DPSP,DPMLE1 and DPPMS are all at an offset
from the base - which is the FLexi IO Adaptor. Lets follow the
offset calculation while accessing these registers.
v2:
- Follow spec for numbering - s/0/1(Lucas)
- s/FIA_1/FIA1_BASE (Anusha)
v3:
- Remove register offset defines. (Jani)
- Update comment. (Anusha)
v4: rebase. Remove comment.(Lucas)
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Lucas De Marchi <lucas.demarchi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101185557.29585-1-anusha.srivatsa@intel.com
Ville Syrjälä [Wed, 24 Oct 2018 15:48:25 +0000 (18:48 +0300)]
ALSA: x86: Rip out the lpe audio runtime suspend/resume hooks
Ever since commit
46e831abe864 ("drm/i915/lpe: Mark LPE audio runtime
pm as "no callbacks"") the runtime suspend/resume hooks are no longer
used. Inline them into the system suspend hooks.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024154825.18185-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Takashi Iwai <tiwai@suse.de>
Ville Syrjälä [Wed, 24 Oct 2018 15:48:24 +0000 (18:48 +0300)]
ALSA: x86: Fix runtime PM for hdmi-lpe-audio
Commit
46e831abe864 ("drm/i915/lpe: Mark LPE audio runtime pm as
"no callbacks"") broke runtime PM with lpe audio. We can no longer
runtime suspend the GPU since the sysfs power/control for the
lpe-audio device no longer exists and the device is considered
always active. We can fix this by not marking the device as
active.
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Fixes: 46e831abe864 ("drm/i915/lpe: Mark LPE audio runtime pm as "no callbacks"")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024154825.18185-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Takashi Iwai <tiwai@suse.de>
Radhakrishna Sripada [Tue, 23 Oct 2018 01:44:00 +0000 (18:44 -0700)]
drm/i915: Allow "max bpc" property to limit pipe_bpp
Use the newly added "max bpc" connector property to limit pipe bpp.
V3: Use drm_connector_state to access the "max bpc" property
V4: Initialize the drm property, add suuport to DP(Ville)
V5: Use the property in the connector and fix CI failure(Ville)
V6: Use the core function to attach max_bpc property, remove the redundant
clamping of pipe bpp based on connector info
V7: Fix Checkpatch warnings
V9: Cleanup connected_sink_max_bpp and fix initial value in DP(Ville)
V12: Fix debug message(Ville)
V13: Remove the redundant check and simplify the check logic(Stan)
V14: Fix the check in connected_sink_max_bpp(Stan)
v15 (From Manasi): Add missing break (Stan)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Kishore Kadiyala <kishore.kadiyala@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023014400.16055-1-manasi.d.navare@intel.com
Radhakrishna Sripada [Fri, 12 Oct 2018 18:42:32 +0000 (11:42 -0700)]
drm: Add connector property to limit max bpc
At times 12bpc HDMI cannot be driven due to faulty cables, dongles
level shifters etc. To workaround them we may need to drive the output
at a lower bpc. Currently the user space does not have a way to limit
the bpc. The default bpc to be programmed is decided by the driver and
is run against connector limitations.
Creating a new connector property "max bpc" in order to limit the bpc.
xrandr can make use of this connector property to make sure that bpc does
not exceed the configured value. This property can be used by userspace to
set the bpc.
V2: Initialize max_bpc to satisfy kms_properties
V3: Move the property to drm_connector
V4: Split drm and i915 components(Ville)
V5: Make the property per connector(Ville)
V6: Compare the requested bpc to connector bpc(Daniel)
Move the attach_property function to core(Ville)
V7: Fix checkpatch warnings
V8: Simplify the connector check code(Ville)
V9: Const display_info(Ville)
V10,V11: Fix CI issues.
V12: Add the Kernel documentation(Daniel)
V14: Crossreference the function name in the doc(Daniel)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Kishore Kadiyala <kishore.kadiyala@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Stanislav Lisovskiy <stanislav.lisovskiy@intel.com>
Cc: Sunpeng Li <sunpeng.li@amd.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181012184233.29250-1-radhakrishna.sripada@intel.com
Jani Nikula [Fri, 2 Nov 2018 10:04:11 +0000 (12:04 +0200)]
drm/i915: Update DRIVER_DATE to
20181102
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Jani Nikula [Wed, 31 Oct 2018 11:04:53 +0000 (13:04 +0200)]
drm/i915: also group device info array helper macros with others
Keep the register choosing macros together. No functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-4-jani.nikula@intel.com
Jani Nikula [Wed, 31 Oct 2018 11:04:52 +0000 (13:04 +0200)]
drm/i915: reorder and reindent the register choosing helper wrappers
Try to make it slightly less of an eye sore. No functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-3-jani.nikula@intel.com
Jani Nikula [Wed, 31 Oct 2018 11:04:51 +0000 (13:04 +0200)]
drm/i915: define _MMIO_PLANE() in terms of _PLANE() not _MMIO_PIPE()
Minor semantic nit, no functional changes.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-2-jani.nikula@intel.com
Jani Nikula [Wed, 31 Oct 2018 11:04:50 +0000 (13:04 +0200)]
drm/i915: remove palette_offsets from device info in favor of _PICK()
The device info offset arrays for unevenly spaced register offsets is
great for widely used registers. However, the palette registers are only
used in one function, i9xx_load_luts_internal(), and only for GMCH
platforms, wasting device info. Replace palette_offsets with _PICK() in
palette register definition.
While the use of _PICK() does not check for pipe C existence, neither
does the current offset array usage, and leads to bogus address when
pipe C is passed to PALETTE() on non-CHV. Using _PICK() at least leads
to a sensible register offset, just non-existing on non-CHV. Either way,
this shouldn't happen anyway.
Remove unused old palette macros while at it.
Bloat-o-meter results below for completeness.
add/remove: 0/0 grow/shrink: 3/6 up/down: 94/-278 (-184)
Function old new delta
i9xx_load_luts_internal 394 483 +89
i915_driver_load 5103 5107 +4
g4x_pre_enable_dp 378 379 +1
intel_engines_init_mmio 1117 1116 -1
intel_engine_lookup_user 47 46 -1
hdmi_port_clock_valid 310 309 -1
gen11_irq_handler 707 706 -1
intel_device_info_dump_runtime 329 311 -18
intel_device_info_runtime_init 5166 4910 -256
Total: Before=918650, After=918466, chg -0.02%
add/remove: 0/0 grow/shrink: 0/48 up/down: 0/-576 (-576)
Data old new delta
intel_valleyview_info 200 188 -12
intel_skylake_gt4_info 200 188 -12
intel_skylake_gt3_info 200 188 -12
intel_skylake_gt2_info 200 188 -12
intel_skylake_gt1_info 200 188 -12
intel_sandybridge_m_gt2_info 200 188 -12
intel_sandybridge_m_gt1_info 200 188 -12
intel_sandybridge_d_gt2_info 200 188 -12
intel_sandybridge_d_gt1_info 200 188 -12
intel_pineview_info 200 188 -12
intel_kabylake_gt3_info 200 188 -12
intel_kabylake_gt2_info 200 188 -12
intel_kabylake_gt1_info 200 188 -12
intel_ivybridge_q_info 200 188 -12
intel_ivybridge_m_gt2_info 200 188 -12
intel_ivybridge_m_gt1_info 200 188 -12
intel_ivybridge_d_gt2_info 200 188 -12
intel_ivybridge_d_gt1_info 200 188 -12
intel_ironlake_m_info 200 188 -12
intel_ironlake_d_info 200 188 -12
intel_icelake_11_info 200 188 -12
intel_i965gm_info 200 188 -12
intel_i965g_info 200 188 -12
intel_i945gm_info 200 188 -12
intel_i945g_info 200 188 -12
intel_i915gm_info 200 188 -12
intel_i915g_info 200 188 -12
intel_i865g_info 200 188 -12
intel_i85x_info 200 188 -12
intel_i845g_info 200 188 -12
intel_i830_info 200 188 -12
intel_haswell_gt3_info 200 188 -12
intel_haswell_gt2_info 200 188 -12
intel_haswell_gt1_info 200 188 -12
intel_gm45_info 200 188 -12
intel_geminilake_info 200 188 -12
intel_g45_info 200 188 -12
intel_g33_info 200 188 -12
intel_coffeelake_gt3_info 200 188 -12
intel_coffeelake_gt2_info 200 188 -12
intel_coffeelake_gt1_info 200 188 -12
intel_cherryview_info 200 188 -12
intel_cannonlake_info 200 188 -12
intel_broxton_info 200 188 -12
intel_broadwell_rsvd_info 200 188 -12
intel_broadwell_gt3_info 200 188 -12
intel_broadwell_gt2_info 200 188 -12
intel_broadwell_gt1_info 200 188 -12
Total: Before=195529, After=194953, chg -0.29%
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031110453.12722-1-jani.nikula@intel.com
Jani Nikula [Fri, 2 Nov 2018 07:00:55 +0000 (09:00 +0200)]
Merge drm/drm-next into drm-intel-next-queued
Although there's nothing crucial missing, it's been a long time since
the last backmerge. Catch up with drm-next.
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Dave Airlie [Fri, 2 Nov 2018 05:17:56 +0000 (15:17 +1000)]
Merge tag 'drm-intel-next-fixes-2018-10-25' of git://anongit.freedesktop.org/drm/drm-intel into drm-next
- Fix to avoid link retraining workaround on eDP (the other is a comment change)
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181025131836.GA2296@jlahtine-desk.ger.corp.intel.com
Anusha Srivatsa [Thu, 1 Nov 2018 21:42:16 +0000 (14:42 -0700)]
drm/i915/icl: Fix DSS_CTL register names
This patch fixes the naming of the registers:
s/PIPE_DSS_CTL/ICL_PIPE_DSS_CTL
And also fix the hex values to lower case, to match
rest of the definitions.
Manasi noticed this with the patch that was merged.
v2: fix "Fixes" tag.
Fixes: 8b1b558d690a ("drm/i915/icl: Add DSS_CTL Registers")
Suggested-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101214216.8958-1-anusha.srivatsa@intel.com
Dave Airlie [Fri, 2 Nov 2018 02:56:24 +0000 (12:56 +1000)]
Merge branch 'drm-next-4.20' of git://people.freedesktop.org/~agd5f/linux into drm-next
- Fix flickering at low backlight levels on some systems
- Fix some overclocking regressions
- Vega20 updates for
- GPU recovery fixes
- Disable gfxoff on RV as some sbios/fw combinations are not stable yet
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101151939.2828-1-alexander.deucher@amd.com
Dave Airlie [Fri, 2 Nov 2018 01:53:48 +0000 (11:53 +1000)]
Merge tag 'drm-misc-next-fixes-2018-10-31' of git://anongit.freedesktop.org/drm/drm-misc into drm-next
- Properly label Innolux TV123WAM as P120ZDG-BF1 (Doug)
- Add optional delay for panels without hpd hooked up (which solves the
mystery delay for TI SN65DSI86 bridge) (Doug)
- Another 6bpc quirk for BOE panel 0x0771 (Shawn)
Cc: Doug Anderson <dianders@chromium.org>
Cc: Lee, Shawn C <shawn.c.lee@intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Sean Paul <sean@poorly.run>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031201944.GA262020@art_vandelay
Imre Deak [Thu, 1 Nov 2018 14:04:27 +0000 (16:04 +0200)]
drm/i915/icl+: Sanitize port to PLL mapping
BIOS can leave the PLL to port mapping enabled, even if the
corresponding encoder is disabled. Disable the port mapping in this
case.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-9-imre.deak@intel.com
Imre Deak [Thu, 1 Nov 2018 14:04:26 +0000 (16:04 +0200)]
drm/i915: Configure AUX_CH_CTL when enabling the AUX power domain
Most of the AUX_CH_CTL flags are concerned with DP AUX transfer
parameters. As opposed to this the flag specifying the thunderbolt vs.
non-thunderbolt mode of the port is not related to AUX transfers at all
(rather it's repurposed to enable either TBT or non-TBT PHY HW blocks).
The programming has to be done before enabling the corresponding AUX
power well, so make it part of the power well code.
v3:
- Use existing enable/disable helpers instead of opencoding. (Jose)
- Fix type of is_tc_tbt to remain a bitfield. (Lucas)
- Add comment describing the is_tc_tbt power well flag. (Lucas)
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108548
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-8-imre.deak@intel.com
Imre Deak [Thu, 1 Nov 2018 14:04:25 +0000 (16:04 +0200)]
drm/i915: Enable AUX power for HDMI DDI/TypeC main link too
DDI/TypeC ports need the AUX power domain for main link functionality
even when they operate in HDMI static mode, so enable the power domain
for these ports too.
v4:
- Rebase on the upstream ICL pre_pll_enable change.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-7-imre.deak@intel.com
Imre Deak [Thu, 1 Nov 2018 14:04:24 +0000 (16:04 +0200)]
drm/i915: Enable AUX power earlier
For DDI/TypeC ports the AUX power domain needs to be enabled before the
port's PLL is enabled, so move the enabling earlier accordingly.
v2:
- Preserve the pre_pll hook for GEN9_LP. (Ville)
v3:
- Add related BSpec entries to commit log. (Jose)
v4:
- Rebase on the upstream ICL pre_pll_enable change.
BSpec: 21750, 22243
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-6-imre.deak@intel.com
Imre Deak [Thu, 1 Nov 2018 14:04:23 +0000 (16:04 +0200)]
drm/i915: Use a helper to get the aux power domain
From ICL onwards the AUX power domain may change dynamically based on
whether a DDI/TypeC port is in thunderbolt or non-thunderbolt mode, so
use a helper function instead of a static field to get the current
domain.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-5-imre.deak@intel.com
Imre Deak [Thu, 1 Nov 2018 14:04:22 +0000 (16:04 +0200)]
drm/i915: Init aux_ch for HDMI ports too
From ICL onwards DDI/TypeC ports - even in HDMI static mode - need to know
which AUX CH belongs to them, so initialize aux_ch for those ports too.
For consistency do this for all HDMI ports, not only for DDI/TypeC ones.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-4-imre.deak@intel.com
Imre Deak [Thu, 1 Nov 2018 14:04:21 +0000 (16:04 +0200)]
drm/i915: Move aux_ch to intel_digital_port
From ICL onwards all DDI/TypeC ports - even working in HDMI mode - need
to know their corresponding AUX CH, so move the field to a common
struct.
No functional change.
v3:
- Add code comment about which ports aux_ch is used for. (Jose)
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-3-imre.deak@intel.com
Imre Deak [Thu, 1 Nov 2018 14:04:20 +0000 (16:04 +0200)]
drm/i915: Move intel_aux_ch() to intel_bios.c
From ICL onwards all the DDI/TypeC ports - even working in HDMI mode -
need to know their corresponding AUX channel, so move the corresponding
helper to a common place.
No functional change.
v4:
- Fix 'no space is necessary after a cast' checkpatch warn.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181101140427.31026-2-imre.deak@intel.com
Oscar Mateo [Tue, 30 Oct 2018 08:45:04 +0000 (01:45 -0700)]
drm/i915/icl: WaAllowUMDToModifySamplerMode
Required for Bindless samplers.
Userspace consumer: mesa
V2: Rebase
V3: Update commit message
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030084504.21537-4-radhakrishna.sripada@intel.com
Oscar Mateo [Tue, 30 Oct 2018 08:45:03 +0000 (01:45 -0700)]
drm/i915/icl: WaAllowUMDToModifyHalfSliceChicken7
Required to dinamically set 'Trilinear Filter Quality Mode'
Userpsace consumer is mesa.
V2: Rebase
V3: Update commit message
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030084504.21537-3-radhakrishna.sripada@intel.com
Radhakrishna Sripada [Tue, 30 Oct 2018 08:45:02 +0000 (01:45 -0700)]
drm/i915/icl: Implement Display WA_1405510057
Display WA_1405510057 asks to not enable YUV 420 HDMI
10bpc when horizontal blank size mod 8 reminder is 2.
V2: Rebase(r-b: Anusha)
V3: crtc_state->s/ycbcr420/output_format/
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030084504.21537-2-radhakrishna.sripada@intel.com
Radhakrishna Sripada [Tue, 30 Oct 2018 08:45:01 +0000 (01:45 -0700)]
drm/i915/icl: Add WaEnable32PlaneMode
Gen11 Display suports 32 planes in total. Enable the new format in context
status to be used and expanded to 32 planes.
V2: Move the WA to display WA's(Chris)
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030084504.21537-1-radhakrishna.sripada@intel.com
Rodrigo Vivi [Wed, 31 Oct 2018 16:28:45 +0000 (09:28 -0700)]
drm/i915: Remove CNL from WA 827
CNL A stepping was the only affected there.
But also it is time to clean old pre-production
CNL Workarounds, so let's just remove and clean
this W/A.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Clint Taylor <Clinton.A.Taylor@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031162845.12419-4-rodrigo.vivi@intel.com
Rodrigo Vivi [Wed, 31 Oct 2018 16:28:44 +0000 (09:28 -0700)]
drm/i915: Define WA 0870 and kill dead code.
Let's introduce the WA number that is the
cause of having NV12 disabled on both SLK and BXT.
According to Spec:
WA 0870: "Display flickers with NV12 video playback in
Y tiling mode.
WA: Use YUV422 surface format instead of NV12."
v2: remove the useless dead code and consequently
avoiding device info flag. (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031162845.12419-3-rodrigo.vivi@intel.com
Rodrigo Vivi [Wed, 31 Oct 2018 16:28:43 +0000 (09:28 -0700)]
drm/i915: Kill WA 0826
According to BSpec this is not needed anymore:
"This workaround is no longer needed since NV12
support is dropped for the affected projects.
"
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031162845.12419-2-rodrigo.vivi@intel.com
Rodrigo Vivi [Wed, 31 Oct 2018 16:28:42 +0000 (09:28 -0700)]
drm/i915: Kill WA 0528
First of all I believe this WA as written here was wrong.
Because it is listed on BSpec only for SKL and BXT, exactly
the only 2 platforms skipped here.
But also it is written there that we don't need this WA
anymore:
"This workaround is no longer needed since NV12 support is
dropped for the affected projects in #0870."
SO, let's kill it.
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031162845.12419-1-rodrigo.vivi@intel.com
Anusha Srivatsa [Wed, 31 Oct 2018 20:27:26 +0000 (13:27 -0700)]
drm/i915/icl: Fix DC9 Suspend for ICL.
Add missing block that takes care of inline intel_suspend_complete
for DC9 on ICL.
Daniele noticed this was part of original patch but missed on
on merged commit ("drm/i915/icl: Enable DC9 as lowest possible
state during screen-off").
Fixes: 3e68928b7d4c ("drm/i915/icl: Enable DC9 as lowest possible state during screen-off")
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
[Rodrigo added a commit message while merging]
Link: https://patchwork.freedesktop.org/patch/msgid/20181031202726.4021-1-anusha.srivatsa@intel.com
Anusha Srivatsa [Tue, 30 Oct 2018 11:56:35 +0000 (13:56 +0200)]
drm/i915/icl: Add DSS_CTL Registers
Add defines for DSS_CTL registers.
These registers specify the big joiner, splitter,
overlap pixels and info regarding
compression enabled on left or right branch.
v2:
- rebase. Remove overlapping defines(James Ausmus)
- Rename the register to ICL_DSS_CTL1/2_PIPE_ (manasi)
- take pixels as an argument for overlap.(Manasi)
v3:
- rebase. merge DSS_CTL1/2 introduced in Madhav's patch
to avoid confusion (madhav chauhan)
- Rename registers in accordance to BSpec (Madhav, Rodrigo)
- Add define to conditionally check the buffer target depth (James Ausmus)
v4:
- remove redundant definitions.(madhav)
v5:
- Add mask for overlap pixels.
- Code Style changes.(Madhav)
v6:
- Code style changes. (Madhav)
Suggested-by: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: James Ausmus <james.ausmus@intel.com>
Cc: Gaurav Singh <gaurav.k.singh@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/07021336cb87d09e8f97fbff709c4e686d7de536.1540900289.git.jani.nikula@intel.com
Christian König [Wed, 24 Oct 2018 12:59:10 +0000 (14:59 +0200)]
drm/amdgpu: revert "enable gfxoff in non-sriov and stutter mode by default"
This is still completely breaking my Raven system.
This reverts commit
cdf2f910fa969adca1b0e3ad2b487821233dc038.
Revert until we sort out the sbios and firmware combinations that work
correctly.
bug: https://bugs.freedesktop.org/show_bug.cgi?id=108606
Cc: stable@vger.kernel.org # v4.19
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Wed, 31 Oct 2018 11:12:01 +0000 (19:12 +0800)]
drm/amd/pp: Print warning if od_sclk/mclk out of range
print warning in dmesg to notify user the setting for
sclk_od/mclk_od out of range that vbios can support
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Tue, 30 Oct 2018 12:01:59 +0000 (20:01 +0800)]
drm/amd/pp: Fix pp_sclk/mclk_od not work on Vega10
not update dpm table with user's setting.
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Mon, 22 Oct 2018 05:27:37 +0000 (13:27 +0800)]
drm/amd/pp: Fix pp_sclk/mclk_od not work on smu7
not update the dpm table with user's setting
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Evan Quan [Wed, 31 Oct 2018 06:15:04 +0000 (14:15 +0800)]
drm/amd/powerplay: no MGPU fan boost enablement on DPM disabled
As MGPU fan boost feature will be definitely not needed when
DPM is disabled. So, there is no need to error out.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andrey Grodzovsky [Wed, 31 Oct 2018 14:23:05 +0000 (10:23 -0400)]
drm/amdgpu: Fix skipping hangged job reset during gpu recover.
Problem:
During GPU recover DAL would hang in
amdgpu_pm_compute_clocks->amdgpu_fence_wait_empty
Fix:
Turns out there was a typo introduced by
3320b8d drm/amdgpu: remove job->ring which caused skipping
amdgpu_fence_driver_force_completion and so the hangged job
was never force signaled and this would cause the hang later in DAL.
Signed-off-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Madhav Chauhan [Tue, 30 Oct 2018 11:56:42 +0000 (13:56 +0200)]
drm/i915/icl: Don't wait for empty FIFO
For Gen11 DSI, we don't need to wait for getting
DSI FIFO empty after sending DCS commands.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/5e078a0274c1fba2521cb14d7d02fd1038ec1b0e.1540900289.git.jani.nikula@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:23 +0000 (13:56 +0200)]
drm/i915/icl: Find DSI presence for ICL
This patch detects DSI presence for ICL platform
by reading VBT. DSI detection is done while initializing
DSI using newly added function intel_gen11_dsi_init.
v2 by Jani:
- Preserve old behavour of intel_bios_is_dsi_present()
- s/intel_gen11_dsi_init/icl_dsi_init/g
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/2324cdfc8918bda3165354e5e0d15053b1074f14.1540900289.git.jani.nikula@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:26 +0000 (13:56 +0200)]
drm/i915/icl: Add DSI packet payload/header registers
This patch defines payload/header registers for each DSI
transcoder used for transmitting DSI packets.
v2 by Jani:
- Drop full register mask and shift for payload
- Use lower case for hex 0x
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/18275c49215e512347a14bc38715314c2d6f95a4.1540900289.git.jani.nikula@intel.com
Manasi Navare [Tue, 23 Oct 2018 19:12:48 +0000 (12:12 -0700)]
drm/i915/ICL: Add pre_pll_enable hook for ICL and set DFLEXDPMLE in this hook
In case of Legacy DP connector on TypeC port, the
flex IO DPMLE register is set to number of lanes configured
by the display driver which will be programmed into DDI_BUF_CTL
PORT_WIDTH_SELECTION.
This needs to be programmed before enabling the shared PLLs hence
add a pre_pll_enable hook for ICL and add this programming in that hook.
v2:
* Remove the check for combophy port (Jose)
* Simplify the port reversal check logic (Jose)
Cc: Lucas De Marchi <lucas.demarchi@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023191248.26418-2-manasi.d.navare@intel.com
Manasi Navare [Tue, 23 Oct 2018 19:12:47 +0000 (12:12 -0700)]
drm/i915/icl: Fix the macros for DFLEXDPMLE register bits
This patch fixes the macros used for defining the DFLEXDPMLE
register bit fields. This accounts for changes in the spec.
Fixes: a2bc69a1a9d6 ("drm/i915/icl: Add register definition for DFLEXDPMLE")
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Jose Roberto de Souza <jose.souza@intel.com>
Cc: <stable@vger.kernel.org> # v4.19+
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: José Roberto de Souza <jose.souza@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181023191248.26418-1-manasi.d.navare@intel.com
José Roberto de Souza [Tue, 30 Oct 2018 21:57:50 +0000 (14:57 -0700)]
drm/i915/icl: Fix crash when getting DPLL of a MST encoder in TC ports
enc_to_dig_port() returns NULL for encoders of type
INTEL_OUTPUT_DP_MST causing the crash bellow:
[ 2832.836101] BUG: unable to handle kernel paging request at
00000000000012b8
[ 2832.843062] PGD 0 P4D 0
[ 2832.845610] Oops: 0000 [#1] SMP
[ 2832.848764] CPU: 2 PID: 3577 Comm: kworker/2:0 Tainted: G W 4.19.0-rc7+ #491
[ 2832.857106] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.2352.A01.
1808281852 08/28/2018
[ 2832.870734] Workqueue: events output_poll_execute
[ 2832.875480] RIP: 0010:icl_get_dpll+0xa4/0x5d0 [i915]
[ 2832.880449] Code: e9 03 f3 48 ab 8b 6e 74 41 8b 8c 24 5c 03 00 00 85 ed 0f 88 3f 02 00 00 83 fd 01 0f 8e ad 01 00 00 83 fd 05 0f 8f 2d 02 00 00 <83> ba b8 12 00 00 02 48 8b 36 0f 84 39 02 00 00 44 8b be ec 89 00
[ 2832.899176] RSP: 0018:
ffffc90001b57a78 EFLAGS:
00010293
[ 2832.904404] RAX:
0000000000000000 RBX:
ffffc90001b57a94 RCX:
0000000000083d60
[ 2832.911536] RDX:
0000000000000000 RSI:
ffff8804a8c0dc00 RDI:
ffffc90001b57b18
[ 2832.918668] RBP:
0000000000000003 R08:
ffff8804a8c1f990 R09:
ffff8804a8c1f990
[ 2832.925797] R10:
0000000000000000 R11:
ffff8804a8e99600 R12:
ffff8804a7760000
[ 2832.932930] R13:
ffff88049e94d000 R14:
ffff88049e94d000 R15:
000000000000000e
[ 2832.940063] FS:
0000000000000000(0000) GS:
ffff8804b0300000(0000) knlGS:
0000000000000000
[ 2832.948147] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 2832.953893] CR2:
00000000000012b8 CR3:
0000000004a1d004 CR4:
0000000000760ee0
[ 2832.961027] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 2832.968155] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 2832.975286] PKRU:
55555554
[ 2832.978003] Call Trace:
[ 2832.980496] haswell_crtc_compute_clock+0x3d/0x68 [i915]
[ 2832.985841] intel_crtc_atomic_check+0x61/0x340 [i915]
[ 2832.990987] drm_atomic_helper_check_planes+0x130/0x1c0
[ 2832.996245] intel_atomic_check+0x4d5/0x10f0 [i915]
[ 2833.001147] drm_atomic_check_only+0x484/0x690
[ 2833.005629] drm_atomic_commit+0x13/0x50
[ 2833.009564] restore_fbdev_mode_atomic+0x1c9/0x1e0
[ 2833.014363] drm_fb_helper_restore_fbdev_mode_unlocked+0x47/0x90
[ 2833.020368] drm_fb_helper_set_par+0x29/0x50
[ 2833.024641] drm_fb_helper_hotplug_event.part.33+0x92/0xb0
[ 2833.030130] drm_kms_helper_hotplug_event+0x26/0x30
[ 2833.035013] output_poll_execute+0x192/0x1b0
[ 2833.039293] process_one_work+0x2a5/0x5f0
[ 2833.043315] worker_thread+0x2d/0x3d0
[ 2833.046988] ? rescuer_thread+0x340/0x340
[ 2833.051009] kthread+0x112/0x130
[ 2833.054247] ? kthread_create_worker_on_cpu+0x70/0x70
[ 2833.059307] ret_from_fork+0x3a/0x50
[ 2833.062893] Modules linked in: i915 prime_numbers snd_hda_codec_realtek snd_hda_codec_generic asix snd_usb_audio snd_usbmidi_lib snd_seq_midi snd_seq_midi_event snd_rawmidi cdc_ether usbnet x86_pkg_temp_thermal xhci_pci xhci_hcd ucsi_acpi typec_ucsi typec efivarfs [last unloaded: prime_numbers]
[ 2833.088917] CR2:
00000000000012b8
[ 2833.092241] ---[ end trace
25f9fe3d47af2e75 ]---
[ 2833.096895] RIP: 0010:icl_get_dpll+0xa4/0x5d0 [i915]
[ 2833.101866] Code: e9 03 f3 48 ab 8b 6e 74 41 8b 8c 24 5c 03 00 00 85 ed 0f 88 3f 02 00 00 83 fd 01 0f 8e ad 01 00 00 83 fd 05 0f 8f 2d 02 00 00 <83> ba b8 12 00 00 02 48 8b 36 0f 84 39 02 00 00 44 8b be ec 89 00
[ 2833.120589] RSP: 0018:
ffffc90001b57a78 EFLAGS:
00010293
[ 2833.125815] RAX:
0000000000000000 RBX:
ffffc90001b57a94 RCX:
0000000000083d60
[ 2833.132946] RDX:
0000000000000000 RSI:
ffff8804a8c0dc00 RDI:
ffffc90001b57b18
[ 2833.140080] RBP:
0000000000000003 R08:
ffff8804a8c1f990 R09:
ffff8804a8c1f990
[ 2833.147213] R10:
0000000000000000 R11:
ffff8804a8e99600 R12:
ffff8804a7760000
[ 2833.154350] R13:
ffff88049e94d000 R14:
ffff88049e94d000 R15:
000000000000000e
[ 2833.161483] FS:
0000000000000000(0000) GS:
ffff8804b0300000(0000) knlGS:
0000000000000000
[ 2833.169565] CS: 0010 DS: 0000 ES: 0000 CR0:
0000000080050033
[ 2833.175313] CR2:
00000000000012b8 CR3:
0000000004a1d004 CR4:
0000000000760ee0
[ 2833.182449] DR0:
0000000000000000 DR1:
0000000000000000 DR2:
0000000000000000
[ 2833.189578] DR3:
0000000000000000 DR6:
00000000fffe0ff0 DR7:
0000000000000400
[ 2833.196712] PKRU:
55555554
MST ports are allocated from struct intel_dp_mst_encoder not from
struct intel_digital_port as regular ports, so to get the TC type it
is necessary check the primary digital port of the mst encoder.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030215750.28213-5-jose.souza@intel.com
José Roberto de Souza [Tue, 30 Oct 2018 21:57:49 +0000 (14:57 -0700)]
drm/i915: Initialize panel_vdd_work only for eDP ports
It is only used by eDP ports so no need to initialize it for each DP
port.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030215750.28213-4-jose.souza@intel.com
José Roberto de Souza [Tue, 30 Oct 2018 21:57:48 +0000 (14:57 -0700)]
drm/i915/icl: Set TC type to unknown when a sudden disconnection happen
Otherwise it would be in a inconsistent state as port is disconnected
but with a valid tc type.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030215750.28213-3-jose.souza@intel.com
José Roberto de Souza [Tue, 30 Oct 2018 21:57:47 +0000 (14:57 -0700)]
drm/i915/icl: Set TC type to unknown in the disconnection flow
Otherwise it would be in a inconsistent state as port is disconnected
but with a valid tc type.
Also setting it to unknown will earlier return
icl_tc_phy_disconnect() for any future calls to
intel_digital_port_connected(), this way we don't need to check if
port is marked as safe everytime.
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030215750.28213-2-jose.souza@intel.com
José Roberto de Souza [Tue, 30 Oct 2018 21:57:46 +0000 (14:57 -0700)]
drm/i915/debugfs: Do not print cached information of a disconnected sink
Besides of give the expected output of i915_display_info it will also
avoid some aux ch transactions that would timeout by obvious reasons.
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030215750.28213-1-jose.souza@intel.com
Ville Syrjälä [Mon, 29 Oct 2018 14:00:31 +0000 (16:00 +0200)]
drm/i915: Fix error handling for the NV12 fb dimensions check
Let's not leak obj->framebuffer_references when we decide that
the framebuffer domensions are not suitable for NV12.
Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Vidya Srinivas <vidya.srinivas@intel.com>
Fixes: e44134f2673c ("drm/i915: Add NV12 support to intel_framebuffer_init")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029140031.11765-1-ville.syrjala@linux.intel.com
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Ville Syrjälä [Wed, 24 Oct 2018 15:52:08 +0000 (18:52 +0300)]
drm/i915: Use intel_panel_actually_set_backlight() to disable PWM backlight
Use intel_panel_actually_set_backlight() instead of a direct
call to pwm_config() in pwm_disable_backlight().
The main benefit is consistent debug logging when we turn off the
backlight. Currently we see nothing in dmesg which made me wonder
whether the backlight was even getting turned off properly.
The second benefit is consistency; This is what we do for all
the other backlight implementations.
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181024155208.18987-1-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Manasi Navare [Wed, 31 Oct 2018 00:19:23 +0000 (17:19 -0700)]
drm/dp: Define payload size for DP SDP PPS packet
DP 1.4 spec defines DP secondary data packet for DSC
picture parameter set. This patch defines its payload size
according to the DP 1.4 specification.
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Acked-by: Sean Paul <seanpaul@chromium.org> (For merging through
drm-intel)
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031001923.31442-7-manasi.d.navare@intel.com
Manasi Navare [Wed, 31 Oct 2018 00:19:22 +0000 (17:19 -0700)]
drm/i915/dp: Validate modes using max Output BPP and slice count when DSC supported
When DSC is supported we need to validate the modes based on the
maximum supported compressed BPP and maximum supported slice count.
This allows us to allow the modes with pixel clock greater than the
available link BW as long as it meets the compressed BPP
and slice count requirements.
v3:
* Use the macro for dsc sink support (Jani N)
v2:
* Properly comment why we are right shifting the bpp value (Anusha)
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031001923.31442-6-manasi.d.navare@intel.com
Manasi Navare [Wed, 31 Oct 2018 00:19:21 +0000 (17:19 -0700)]
drm/i915/dp: Add helpers for Compressed BPP and Slice Count for DSC
This patch adds helpers for calculating the maximum compressed BPP
supported with small joiner.
This also adds a helper for calculating the slice count in case
of small joiner.
These are inside intel_dp since they take into account hardware
limitations.
v6:
* Take mode_clock and mode_hdisplay as input arguments
so that this can be called in intel_dp_mode_valid (Manasi)
v5:
* Get the max slice width from DPCD
* Check against Min_Slice_width of 2560 (Anusha)
v4:
* #defines for PPR in slice count helper (Gaurav)
v3:
* Simply logic for bpp (DK)
* Limit the valid slice count by max supported by Sink (Manasi)
v2:
* Change the small joiner RAM buffer constant as bspec changed (Manasi)
* rename it as SMALL_JOINER since we are not enabling
big joiner yet (Anusha)
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031001923.31442-5-manasi.d.navare@intel.com
Manasi Navare [Wed, 31 Oct 2018 00:19:20 +0000 (17:19 -0700)]
drm/dp: DRM DP helper/macros to get DP sink DSC parameters
This patch adds inline functions and helpers for obtaining
DP sink's supported DSC parameters like DSC sink support,
eDP compressed BPP supported, maximum slice count supported
by the sink devices, DSC line buffer bit depth supported on DP sink,
DSC sink maximum color depth by parsing corresponding DPCD registers.
v4:
* Add helper to give line buf bit depth (Manasi)
* Correct the bit masking in color depth helper (manasi)
v3:
* Use SLICE_CAP_2 for DP (Anusha)
v2:
* Add DSC sink support macro (Jani N)
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Cc: dri-devel@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Acked-by: Sean Paul <seanpaul@chromium.org> (For merging through
drm-intel)
Link: https://patchwork.freedesktop.org/patch/msgid/20181031001923.31442-4-manasi.d.navare@intel.com
Manasi Navare [Wed, 31 Oct 2018 00:19:19 +0000 (17:19 -0700)]
drm/i915/dp: Cache the DP/eDP DSC DPCD register set on Hotplug/eDP Init
DSC is supported on eDP starting GEN 10 display (on GLK) and on DP starting
GEN 11.
This patch implements the discovery phase of DSC. On hotplug,
source reads the DSC DPCD register set (0x00060 - 0x0006F) to
read the decompression capabilities of the sink device.
This entire block of registers is cached in intel_dp so that
capability information can be used during DSC configuration
phase during compute_config phase of the modeset.
For eDP, this caching happens during the eDP initialization.
This caching is done only for eDP and DP rev >= 1.4
v5:
* Fix the block comment (Gaurav)
* Fix the commit message DSC DPCD addresses (Gaurav)
* Use DRM_ERROR for dpcd_read fail (Gaurav,Anusha)
v4:
* Cache these only for Gen >= 11
v3:
* Remove the dsc_sink_support field in intel_dp (Jani N)
v2:
* Clear the cached registers on hotplug always (Jani N)
* Combine the eDP and DP caching in same function (Jani N)
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Gaurav K Singh <gaurav.k.singh@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031001923.31442-3-manasi.d.navare@intel.com
Manasi Navare [Wed, 31 Oct 2018 00:19:18 +0000 (17:19 -0700)]
drm/dp: Add DP DSC DPCD receiver capability size define and missing SHIFT
This patch defines the DP DSC receiver capability size that gives
total number of DP DSC DPCD registers.
This also adds a missing #defines for DP DSC support missed in the
commit id (
ab6a46ea6842ce "Add DPCD definitions for DP 1.4 DSC feature")
v3:
* MIN_SLICE_WIDTH = 2560 (Anusha)
* Define DP_DSC_SLICE_WIDTH_MULTIPLIER = 320
v2:
* Add SHIFT define and DECOMPRESSION_EN define missed in prev patch
Cc: dri-devel@lists.freedesktop.org
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Gaurav K Singh <gaurav.k.singh@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Sean Paul <seanpaul@chromium.org> (For merging through
drm-intel)
Reviewed-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031001923.31442-2-manasi.d.navare@intel.com
Anusha Srivatsa [Wed, 31 Oct 2018 00:19:17 +0000 (17:19 -0700)]
drm/i915/dsc: Add slice_row_per_frame in DSC PPS programming
Add the newly added slice_row_per_frame parameter
in the Picture Parameter Set registers.
This defines the number of vertically stacked slices
in a frame.
Credits to Manasi for noticing bSpec change.
Suggested-by: Manasi Navare <manasi.d.navare@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031001923.31442-1-manasi.d.navare@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:22 +0000 (13:56 +0200)]
drm/i915/icl: Program HS_TX_TIMEOUT/LP_RX_TIMEOUT/TA_TIMEOUT registers
Program the timeout values (in escape clock) for HS TX, LP RX and TA
timeout.
HX TX: Ensure that host does not continuously transmit in the HS
state. If this timer expires, then host will gracefully end its HS
transmission and allow the link to enter into LP state.
LP RX: Monitor the length of LP receptions from Peripheral. If timeout
happens then host will drive the stop state onto all data lanes (only
Data Lane 0 should be receiving anything from the Peripheral). This
effectively takes back ownership of the bus transmit in the HS state.
TA timeout: Timeout valuefor monitoring Bus Turn-Around (BTA) sequence.
BTA sequence should complete within a bounded amount of time, with
peripheral acknowledging BTA by driving the stop state.
v2 by Jani:
- Rebase
- Use intel_dsi_bitrate() and intel_dsi_tlpx_ns(intel_dsi)
- Squash HX TX, LP RX and TA timeout into one patch
- Fix bspec mode set sequence reference
- Add FIXME about two timeouts
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/60e610ccffe5f8c09dee1c65828f28f25227efce.1540900289.git.jani.nikula@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:21 +0000 (13:56 +0200)]
drm/i915/icl: Define DSI timeout registers
This patch defines DSI_HTX_TO, DSI_LRX_H_TO, DSI_PWAIT_TO
and DSI_TA_TO registers for DSI transcoders '0' and '1'.
They are used for contention recovery on DPHY.
v2: Define SHIFT for bitfields.
v3 by Jani:
- Fix timeout bit definitions
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/0b943c028a05edfd61c511d712c65c7e8bf70211.1540900289.git.jani.nikula@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:20 +0000 (13:56 +0200)]
drm/i915/icl: Disable DSI IO power
This patch configures mode of combo phy as DDI and
disable IO power for DDI ports used by DSI.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b68d767717a3b86c26042d0b16abb3943756fcc4.1540900289.git.jani.nikula@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:19 +0000 (13:56 +0200)]
drm/i915/icl: Disable DSI ports
This patch disables both DSI ports by writing to
DDI_BUF_CTL registers as part of DSI encoder disable
sequence.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/be9a7dc1ed89ad38679c67ff1c1552f0b4604494.1540900289.git.jani.nikula@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:18 +0000 (13:56 +0200)]
drm/i915/icl: Disable portsync mode
This patch disables portsync mode if DSI link
is operating in dual link mode by writing to
TRANS_DDI_FUNC_CTL2 registers.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3e608420b58930b6da478801bff018c6e964eb94.1540900289.git.jani.nikula@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:17 +0000 (13:56 +0200)]
drm/i915/icl: Disable DDI function
This patch disables DDI function by writing to
TRANS_DDI_FUNC_CTL registers of DSI ports as part
of DSI disable sequence.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/b0088d643247135ba96943fa14625f5a43f43633.1540900289.git.jani.nikula@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:16 +0000 (13:56 +0200)]
drm/i915/icl: Put DSI link in ULPS
As part of DSI disabling sequence, DSI link need to enter
in ULPS by writing into DSI_LP_MSG register. This patch
does the same using a wrapper function.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/50812f4bd37f95c053bef7eef4a95e5da029546f.1540900289.git.jani.nikula@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:15 +0000 (13:56 +0200)]
drm/i915/icl: Power down DSI panel
This patch sends command and executes display off,
assert reset, power off VBT seqeuences to power
down DSI panel. Patch also adds high level function
to wrap all the panel sepcific programming during
DSI disabling.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/efdafbf6b4d31123738b87b2d8264a9b5553eb32.1540900289.git.jani.nikula@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:14 +0000 (13:56 +0200)]
drm/i915/icl: Disable DSI transcoders
This patch disables transcoders by writing to TRANS_CONF
registers for each DSI ports.
v2 by Jani:
- Wait for pipeconf active to go low
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/c76035309fa721322cf9c1ca7fc42b822937c2f3.1540900289.git.jani.nikula@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:13 +0000 (13:56 +0200)]
drm/i915/icl: Turn OFF panel backlight
This patch disbles backlight of DSI panel by using VBT
BACKLIGHT_OFF sequence and panel specific disable functions.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/93cfbb198104deef4a281bbdef721385e4b6d954.1540900289.git.jani.nikula@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:12 +0000 (13:56 +0200)]
drm/i915/icl: Turn ON panel backlight
This patch enables backlight of DSI panel by using VBT
BACKLIGHT_ON sequence and panel specific functions.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/05987eea297689af0b9defcf745a921f76f9011d.1540900289.git.jani.nikula@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:11 +0000 (13:56 +0200)]
drm/i915/icl: Wait for header/payload credits release
Driver needs payload/header credits for sending any command
and data over DSI link. These credits are released once command
or data sent to link. This patch adds functions to wait for releasing
of payload and header credits.
As per BSPEC, driver needs to ensure that all of commands/data
has been dispatched to panel before the transcoder is enabled.
This patch implement those steps i.e. sending NOP DCS command,
wait for header/payload credit to be released etc.
v2 by Jani:
- squash the credit wait helpers patch with the first user
- pass dev_priv to the credit wait helpers
- bikeshed credit helper names
- wait for *at least* the current maximum number of credits
- indentation fix
- add helpers for credits available
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/84bc509beabf2a2d1324a9f2a67ab4ebe05b10a6.1540900289.git.jani.nikula@intel.com
Jonathan Gray [Wed, 31 Oct 2018 00:53:31 +0000 (11:53 +1100)]
drm/i915/ringbuffer: change header SPDX identifier to MIT
Commit
b24413180f56 ("License cleanup: add SPDX GPL-2.0 license
identifier to files with no license") added "SPDX-License-Identifier:
GPL-2.0" to files which previously had no license, change this to MIT
for intel_ringbuffer.h matching the license text of intel_ringbuffer.c.
Signed-off-by: Jonathan Gray <jsg@jsg.id.au>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181031005331.20775-1-jsg@jsg.id.au
Madhav Chauhan [Tue, 30 Oct 2018 11:56:10 +0000 (13:56 +0200)]
drm/i915/icl: Power on DSI panel
This patch execute poweron, deassert reset, display on
VBT sequences and send TURN_ON DSI command to panel for
powering it up.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/8acb06fa634fe9637fdc09a3f5d2588b9138224f.1540900289.git.jani.nikula@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:09 +0000 (13:56 +0200)]
drm/i915/icl: Set max return packet size for DSI panel
This patch programs maximum size of the payload transmitted
from peripheral back to the host processor using short packet
as a part of panel programming.
v2: Rebase
v3 by Jani:
- Add FIXME note.
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ed9df910326adf32eb2bc1cd1a5097d0dda94da8.1540900289.git.jani.nikula@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:08 +0000 (13:56 +0200)]
drm/i915/dsi: move connector mode functions to common file
Move DSI connector functions to intel_dsi.c and make them available to
both legacy and ICL DSI.
v2 by Jani:
- Move the functions to intel_dsi.c
- Don't reuse intel_dsi_connector_destroy()
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/99244c6edf4a26ef2e279c7160d22dbbb5cd95f2.1540900289.git.jani.nikula@intel.com
Madhav Chauhan [Tue, 30 Oct 2018 11:56:07 +0000 (13:56 +0200)]
drm/i915/icl: Move dsi host init code to common file
This patch moves intl_dsi_host_init() code to intel_dsi.c so that legacy
and gen11 DSI code can share this code.
v2 by Jani:
- Move the shared stuff to intel_dsi.c
Signed-off-by: Madhav Chauhan <madhav.chauhan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1ee42b2d3c639e3f3c14a2c1595b8778901574d4.1540900289.git.jani.nikula@intel.com
Matthew Auld [Mon, 29 Oct 2018 20:37:34 +0000 (20:37 +0000)]
drm/i915/selftest: test aligned offsets for 64K
When using softpin it's not enough to just pad the vma size, we also
need to ensure the vma offset is at the start of the pt boundary, if we
plan to utilize 64K pages. Therefore to improve test coverage we should
use both aligned and unaligned gtt offsets in igt_write_huge.
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029203734.21936-1-matthew.auld@intel.com
Hang Yuan [Tue, 30 Oct 2018 07:08:01 +0000 (15:08 +0800)]
drm/i915/gtt: Revert "Disable read-only support under GVT"
This reverts commit
c9e666880de5a1fed04dc412b046916d542b72dd.
Checked GVT codes that guest PPGTT PTE flag bits are propagated
to shadow PTE. Read/write bit is not changed. Further tested by
i915 self-test case "igt_ctx_readonly". No error or GPU hang was
detected. So enable read-only support under GVT.
Signed-off-by: Hang Yuan <hang.yuan@linux.intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1540883281-11359-1-git-send-email-hang.yuan@linux.intel.com
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Evan Quan [Tue, 30 Oct 2018 01:12:22 +0000 (09:12 +0800)]
drm/amd/powerplay: revise Vega20 pptable version check
Tell the version numbers when the pptable versions do not match.
Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Guttula, Suresh [Mon, 29 Oct 2018 05:23:25 +0000 (05:23 +0000)]
drm/amd/display: set backlight level limit to 1
This patch will work as workaround for silicon limitation
related to PWM dutycycle when the backlight level goes to 0.
Actually PWM value is 16 bit value and valid range from 1-65535.
when ever user requested to set this PWM value to 0 which is not
fall in the range, in VBIOS taken care this by limiting to 1.
This patch here will do the same. Either driver or VBIOS can not
pass 0 value as it is not a valid range for PWM and it will
give a high PWM pulse which is not the intended behaviour as
per HW constraints.
Signed-off-by: suresh guttula <suresh.guttula@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Animesh Manna [Mon, 29 Oct 2018 22:14:10 +0000 (15:14 -0700)]
drm/i915/icl: Enable DC9 as lowest possible state during screen-off
ICL supports DC5, DC6, and DC9. Enable DC9 during screen-off, and enable
DC5/6 when appropriate.
v2: (James Ausmus)
- Also handle ICL as GEN9_LP in i915_drm_suspend_late and
i915_drm_suspend_early
- Add DC9 to gen9_dc_mask for ICL
- Re-order GEN checks for newest platform first
- Use INTEL_GEN instead of INTEL_INFO->gen
- Use INTEL_GEN >= 11 instead of IS_ICELAKE
- Consolidate GEN checks
v3: (James Ausmus)
- Also allow DC6 for ICL (Imre, Art)
- Simplify !(GEN >= 11) to GEN < 11 (Imre)
v4: (James Ausmus)
- Don't call intel_power_sequencer_reset after DC9 for Gen11+, as the
PPS regs are Always On
- Rebase against upstream changes
v5: (Anusha Srivatsa)
- rebased against the latest upstream changes.
v6: (Anusha Srivatsa)
- rebased.Use INTEL_GEN consistently.
- Simplify the code (Rodrigo)
v7: rebased. Change order according to platforms(Jyoti)
v8: rebased. Change the check from platform specific to
HAS_PCH_SPLIT(). Add comment in code to be more clear.(Rodrigo)
Cc: Imre Deak <imre.deak@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Animesh Manna <animesh.manna@intel.com>
Signed-off-by: James Ausmus <james.ausmus@intel.com>
Signed-off-by: Anusha Srivatsa <anusha.srivatsa@intel.com>
Tested-by: Jyoti Yadav <jyoti.r.yadav@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029221410.4423-1-anusha.srivatsa@intel.com
Chris Wilson [Tue, 30 Oct 2018 11:05:54 +0000 (11:05 +0000)]
drm/i915: Stop calling intel_opregion unregister/register in suspend/resume
If we reduce the suspend function for intel_opregion to do the minimum
required, the resume function can also do the simple task of notifier
the ACPI bios that we are back. This avoid some nasty restrictions on
the likes of register_acpi_notifier() that are not allowed during the
early phase of resume.
v2: Keep the order of acpi notify vs turning off ardy/drdy the same.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Acked-by: Imre Deak <imre.deak@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181030110554.4111-1-chris@chris-wilson.co.uk
Chris Wilson [Mon, 29 Oct 2018 18:27:21 +0000 (18:27 +0000)]
drm/i915/gtt: Reuse the read-only 64KiB scratch page and directories
If we can prevent stray writes from landing in the scratch page, we can
reuse the same page and same scratch PT for all contexts without fear of
information leaks and side-channels.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029182721.29568-2-chris@chris-wilson.co.uk
Chris Wilson [Mon, 29 Oct 2018 18:27:20 +0000 (18:27 +0000)]
drm/i915/gtt: Record the scratch pte
Record the scratch PTE encoding upon creation rather than recomputing
the bits everytime. This is important for the next patch where we forgo
having a valid scratch page with which we may compute the bits and so
require keeping the PTE value instead.
v2: Fix up scrub_64K to use scratch_pte as well.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029182721.29568-1-chris@chris-wilson.co.uk
Dhinakaran Pandiyan [Fri, 26 Oct 2018 19:53:42 +0000 (12:53 -0700)]
drm/i915: Switch the order of function parameters
intel_fb_pitch_limit() has the parameters pixel_format and fb_modifier
switched in their positions. The parameters are however used correctly,
but change the order for consistency.
Also use kernel data types for both parameters.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026195342.16828-1-dhinakaran.pandiyan@intel.com
Dhinakaran Pandiyan [Fri, 26 Oct 2018 19:38:05 +0000 (12:38 -0700)]
drm/i915: Do not program aux plane offsets on gen11+
The PLANE_AUX_OFFSET mmio does not exist on ICL, do not program it. We'll
still calculate the aux offset as it is required for adjusing x-y offsets.
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026193805.11077-2-dhinakaran.pandiyan@intel.com
Dhinakaran Pandiyan [Fri, 26 Oct 2018 19:38:04 +0000 (12:38 -0700)]
drm/i915: Add function to check for linear surfaces
A framebuffer can comprise surfaces with distinct tiling formats,
making checks against modifier alone insufficient. Make use of a
function to identify a linear surface based on both modifier and color
plane.
v2: Typo fix
v3: remove 'inline' from function definition (Ville)
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026193805.11077-1-dhinakaran.pandiyan@intel.com
Dhinakaran Pandiyan [Fri, 5 Oct 2018 18:56:43 +0000 (11:56 -0700)]
drm/i915: Move VIDEO_DIP_CTL definitions to their right place.
The bits weren't defined in descending order.
v2: Move definitions in a separate patch (Manasi)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005185643.31660-2-dhinakaran.pandiyan@intel.com
Dhinakaran Pandiyan [Fri, 5 Oct 2018 18:56:42 +0000 (11:56 -0700)]
drm/i915: Fix VIDEO_DIP_CTL bit shifts
The shifts for VSC_SELECT bits are wrong, fix it. Good thing is the
definitions are unused.
v2: Moves definitions in another patch (Manasi)
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Fixes: 7af2be6d54d4 ("drm/i915/icl: Add VIDEO_DIP registers")
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181005185643.31660-1-dhinakaran.pandiyan@intel.com
Rodrigo Vivi [Fri, 26 Oct 2018 20:03:17 +0000 (13:03 -0700)]
drm/i915: Simplify has_sagv function
The specially case for SKL for not controlled sagv
is already taken care inside intel_enable_sagv, so there's
no need to duplicate the check here.
v2: Go one step further and remove skl special case. (Jani)
v3: Separate runtime status handle from has_sagv flag.
v4: Go back and accept simple Jani proposed solution.
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026200317.21726-1-rodrigo.vivi@intel.com
Chris Wilson [Mon, 29 Oct 2018 17:29:25 +0000 (17:29 +0000)]
drm/i915/selftests: Test vm isolation
The vm of two contexts are supposed to be independent, such that a stray
write by one cannot be detected by another. Normally the GTT is filled
explicitly by userspace, but the space in between objects is filled with
a scratch page -- and that scratch page should not be able to form an
inter-context backchannel.
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181029172925.10159-1-chris@chris-wilson.co.uk
Rodrigo Vivi [Fri, 26 Oct 2018 00:56:36 +0000 (17:56 -0700)]
drm/i915/glk: Remove 99% limitation.
While checking the opportunity to add a display_gen
check to allow glk and cnl to be on same bucket I noticed
these FIXME cases here.
So I got the confirmation from HW architect that we actually
never needed this workaround.
"GLK supports 2 pixel per clock, so pixel clock can be up to 2 * cdclk."
So, this reverts commit
97f55ca5b662 ("drm/i915/glk: limit pixel
clock to 99% of cdclk workaround")
Fixes: 97f55ca5b662 ("drm/i915/glk: limit pixel clock to 99% of cdclk workaround")
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Madhav Chauhan <madhav.chauhan@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Cc: Clinton Taylor <clinton.a.taylor@intel.com>
Cc: Arthur J Runyan <arthur.j.runyan@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20181026005636.22274-1-rodrigo.vivi@intel.com
projects / openwrt / staging / blogic.git / log