openwrt/staging/blogic.git
12 years agoRevert "sh: Ensure fixmap and store queue space can co-exist."
Paul Mundt [Fri, 18 May 2012 10:30:05 +0000 (19:30 +0900)]
Revert "sh: Ensure fixmap and store queue space can co-exist."

This reverts commit 20e7c297efeca0861adcca073a0d283da659834b.
With store queues enabled the area above P4SEG has special properties
from the MMU's point of view, which was causing fixmap failure. We'll
have to do something else to satisfy the vmalloc range check.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agoserial: sh-sci: Fix for port types without BRI interrupts.
Paul Mundt [Fri, 18 May 2012 09:21:06 +0000 (18:21 +0900)]
serial: sh-sci: Fix for port types without BRI interrupts.

In doing the evt2irq() + muxed vector conversion for various port types
it became apparent that some of the legacy port types will presently
error out due to the irq requesting logic attempting to acquire the
non-existent BRI IRQ. This adds some sanity checks to the request/free
path to ensure that non-existence of a source in itself is not an error.

This should restore functionality for legacy PORT_SCI ports.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agoMerge branch 'sh/evt2irq-migration' into sh-latest
Paul Mundt [Fri, 18 May 2012 09:13:27 +0000 (18:13 +0900)]
Merge branch 'sh/evt2irq-migration' into sh-latest

Conflicts:
arch/sh/kernel/cpu/sh3/setup-sh770x.c
arch/sh/kernel/cpu/sh3/setup-sh7710.c
arch/sh/kernel/cpu/sh3/setup-sh7720.c
arch/sh/kernel/cpu/sh4/setup-sh7750.c
arch/sh/kernel/cpu/sh4a/setup-sh7343.c
arch/sh/kernel/cpu/sh4a/setup-sh7366.c
arch/sh/kernel/cpu/sh4a/setup-sh7722.c
arch/sh/kernel/cpu/sh4a/setup-sh7723.c
arch/sh/kernel/cpu/sh4a/setup-sh7724.c
arch/sh/kernel/cpu/sh4a/setup-sh7757.c
arch/sh/kernel/cpu/sh4a/setup-sh7763.c
arch/sh/kernel/cpu/sh4a/setup-sh7770.c
arch/sh/kernel/cpu/sh4a/setup-sh7785.c
arch/sh/kernel/cpu/sh4a/setup-sh7786.c

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: legacy PCI evt2irq migration.
Paul Mundt [Fri, 18 May 2012 08:42:29 +0000 (17:42 +0900)]
sh: legacy PCI evt2irq migration.

This converts over the legacy PCI IRQs to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: cpu dma evt2irq migration.
Paul Mundt [Fri, 18 May 2012 08:27:28 +0000 (17:27 +0900)]
sh: cpu dma evt2irq migration.

This migrates the cpu-family relative DMA IRQ definitions over to
evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7763rdp evt2irq migration.
Paul Mundt [Fri, 18 May 2012 08:14:34 +0000 (17:14 +0900)]
sh: sh7763rdp evt2irq migration.

Migrate sh7763rdp to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sdk7780 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 08:13:52 +0000 (17:13 +0900)]
sh: sdk7780 evt2irq migration.

Migrate sdk7780 to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: migor evt2irq migration.
Paul Mundt [Fri, 18 May 2012 08:07:09 +0000 (17:07 +0900)]
sh: migor evt2irq migration.

Migrate migor to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: landisk evt2irq migration.
Paul Mundt [Fri, 18 May 2012 07:51:36 +0000 (16:51 +0900)]
sh: landisk evt2irq migration.

Migrate landisk to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: kfr2r09 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 06:53:29 +0000 (15:53 +0900)]
sh: kfr2r09 evt2irq migration.

Migrate kfr2r09 to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: ecovec24 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 06:49:38 +0000 (15:49 +0900)]
sh: ecovec24 evt2irq migration.

Migrate ecovec24 to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: ap325rxa evt2irq migration.
Paul Mundt [Fri, 18 May 2012 06:45:09 +0000 (15:45 +0900)]
sh: ap325rxa evt2irq migration.

Migrate ap325rxa to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: urquell evt2irq migration.
Paul Mundt [Fri, 18 May 2012 06:43:48 +0000 (15:43 +0900)]
sh: urquell evt2irq migration.

Migrate urquell to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7785lcr evt2irq migration.
Paul Mundt [Fri, 18 May 2012 06:42:07 +0000 (15:42 +0900)]
sh: sh7785lcr evt2irq migration.

Migrate sh7785lcr to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: hp6xx evt2irq migration.
Paul Mundt [Fri, 18 May 2012 06:38:50 +0000 (15:38 +0900)]
sh: hp6xx evt2irq migration.

Migrate hp6xx to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: mach-se evt2irq migration.
Paul Mundt [Fri, 18 May 2012 06:34:49 +0000 (15:34 +0900)]
sh: mach-se evt2irq migration.

Migrate Solution Engine boards to evt2irq backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7757lcr evt2irq migration.
Paul Mundt [Fri, 18 May 2012 06:18:10 +0000 (15:18 +0900)]
sh: sh7757lcr evt2irq migration.

Migrate sh7757lcr to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: magicpanelr2 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 05:58:03 +0000 (14:58 +0900)]
sh: magicpanelr2 evt2irq migration.

Migrate magicpanelr2 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: espt evt2irq migration.
Paul Mundt [Fri, 18 May 2012 05:57:21 +0000 (14:57 +0900)]
sh: espt evt2irq migration.

Migrate espt to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: edosk7760 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 05:52:31 +0000 (14:52 +0900)]
sh: edosk7760 evt2irq migration.

Migrate edosk7760 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: edosk7705 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 05:48:53 +0000 (14:48 +0900)]
sh: edosk7705 evt2irq migration.

Migrate edosk7705 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7720 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 05:41:00 +0000 (14:41 +0900)]
sh: sh7720 evt2irq migration.

Migrate SH7720 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7710/sh7712 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 05:37:51 +0000 (14:37 +0900)]
sh: sh7710/sh7712 evt2irq migration.

Migrate SH7710/SH7712 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7706/sh7707/sh7709/sh7709 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 05:34:48 +0000 (14:34 +0900)]
sh: sh7706/sh7707/sh7709/sh7709 evt2irq migration.

Migrate SH770x to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7705 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 05:31:11 +0000 (14:31 +0900)]
sh: sh7705 evt2irq migration.

Migrate SH7705 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7760 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 05:28:11 +0000 (14:28 +0900)]
sh: sh7760 evt2irq migration.

Migrate SH7760 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7750 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 05:18:35 +0000 (14:18 +0900)]
sh: sh7750 evt2irq migration.

Migrate SH7750 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh4-202 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 05:15:11 +0000 (14:15 +0900)]
sh: sh4-202 evt2irq migration.

Migrate SH4-202 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh-x3 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 05:11:22 +0000 (14:11 +0900)]
sh: sh-x3 evt2irq migration.

Migrate SH-X3 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7785 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 05:04:49 +0000 (14:04 +0900)]
sh: sh7785 evt2irq migration.

Migrate SH7785 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7780 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 04:59:18 +0000 (13:59 +0900)]
sh: sh7780 evt2irq migration.

Migrate SH7780 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7770 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 04:52:22 +0000 (13:52 +0900)]
sh: sh7770 evt2irq migration.

Migrate SH7770 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7763 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 04:46:34 +0000 (13:46 +0900)]
sh: sh7763 evt2irq migration.

Migrate SH7763 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7757 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 04:24:34 +0000 (13:24 +0900)]
sh: sh7757 evt2irq migration.

Migrate SH7757 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7724 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 04:12:24 +0000 (13:12 +0900)]
sh: sh7724 evt2irq migration.

Migrate SH7724 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7723 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 03:57:59 +0000 (12:57 +0900)]
sh: sh7723 evt2irq migration.

Migrate SH7723 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7722 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 03:49:38 +0000 (12:49 +0900)]
sh: sh7722 evt2irq migration.

Migrate SH7722 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7366 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 03:43:11 +0000 (12:43 +0900)]
sh: sh7366 evt2irq migration.

Migrate SH7366 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7343 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 03:38:12 +0000 (12:38 +0900)]
sh: sh7343 evt2irq migration.

Migrate SH7343 to evt2irq() backed hwirq lookups.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agosh: sh7786 evt2irq migration.
Paul Mundt [Fri, 18 May 2012 03:29:22 +0000 (12:29 +0900)]
sh: sh7786 evt2irq migration.

This migrates SH7786 to evt2irq() backed hwirq lookup rather than
using an open-coded calculation. This will make it possible to reposition
the vector base at a later point in time.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agoMerge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm
Linus Torvalds [Thu, 17 May 2012 23:52:29 +0000 (16:52 -0700)]
Merge branch 'fixes' of git://git.linaro.org/people/rmk/linux-arm

Pull ARM fixes from Russell King:
 "Small set of fixes again."

* 'fixes' of git://git.linaro.org/people/rmk/linux-arm:
  ARM: 7419/1: vfp: fix VFP flushing regression on sigreturn path
  ARM: 7418/1: LPAE: fix access flag setup in mem_type_table
  ARM: prevent VM_GROWSDOWN mmaps extending below FIRST_USER_ADDRESS
  ARM: 7417/1: vfp: ensure preemption is disabled when enabling VFP access

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Thu, 17 May 2012 23:30:26 +0000 (16:30 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull two networking fixes from David S. Miller:

1) Thanks to Willy Tarreau and Eric Dumazet, we've unlocked a bug that's
   been present in do_tcp_sendpages() since that function was written in
   2002.

   When we block to wait for memory we have to unconditionally try and
   push out pending TCP data, otherwise we can block for an unreasonably
   long amount of time.

2) Fix deadlock in e1000, fixes kernel bugzilla 43132

   From Tushar Dave.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  e1000: Prevent reset task killing itself.
  tcp: do_tcp_sendpages() must try to push data out on oom conditions

12 years agoACPI / PCI / PM: Fix device PM regression related to D3hot/D3cold
Rafael J. Wysocki [Thu, 17 May 2012 22:39:35 +0000 (00:39 +0200)]
ACPI / PCI / PM: Fix device PM regression related to D3hot/D3cold

Commit 1cc0c998fdf2 ("ACPI: Fix D3hot v D3cold confusion") introduced a
bug in __acpi_bus_set_power() and changed the behavior of
acpi_pci_set_power_state() in such a way that it generally doesn't work
as expected if PCI_D3hot is passed to it as the second argument.

First off, if ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) is passed to
__acpi_bus_set_power() and the explicit_set flag is set for the D3cold
state, the function will try to execute AML method called "_PS4", which
doesn't exist.

Fix this by adding a check to ensure that the name of the AML method
to execute for transitions to ACPI_STATE_D3_COLD is correct in
__acpi_bus_set_power().  Also make sure that the explicit_set flag
for ACPI_STATE_D3_COLD will be set if _PS3 is present and modify
acpi_power_transition() to avoid accessing power resources for
ACPI_STATE_D3_COLD, because they don't exist.

Second, if PCI_D3hot is passed to acpi_pci_set_power_state() as the
target state, the function will request a transition to
ACPI_STATE_D3_HOT instead of ACPI_STATE_D3.  However,
ACPI_STATE_D3_HOT is now only marked as supported if the _PR3 AML
method is defined for the given device, which is rare.  This causes
problems to happen on systems where devices were successfully put
into ACPI D3 by pci_set_power_state(PCI_D3hot) which doesn't work
now.  In particular, some unused graphics adapters are not turned
off as a result.

To fix this issue restore the old behavior of
acpi_pci_set_power_state(), which is to request a transition to
ACPI_STATE_D3 (equal to ACPI_STATE_D3_COLD) if either PCI_D3hot or
PCI_D3cold is passed to it as the argument.

This approach is not ideal, because generally power should not
be removed from devices if PCI_D3hot is the target power state,
but since this behavior is relied on, we have no choice but to
restore it at the moment and spend more time on designing a
better solution in the future.

References: https://bugzilla.kernel.org/show_bug.cgi?id=43228
Reported-by: rocko <rockorequin@hotmail.com>
Reported-by: Cristian Rodríguez <crrodriguez@opensuse.org>
Reported-and-tested-by: Peter <lekensteyn@gmail.com>
Signed-off-by: Rafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoe1000: Prevent reset task killing itself.
Tushar Dave [Thu, 17 May 2012 01:04:50 +0000 (01:04 +0000)]
e1000: Prevent reset task killing itself.

Killing reset task while adapter is resetting causes deadlock.
Only kill reset task if adapter is not resetting.
Ref bug #43132 on bugzilla.kernel.org

CC: stable@vger.kernel.org
Signed-off-by: Tushar Dave <tushar.n.dave@intel.com>
Tested-by: Aaron Brown <aaron.f.brown@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agotcp: do_tcp_sendpages() must try to push data out on oom conditions
Willy Tarreau [Thu, 17 May 2012 11:14:14 +0000 (11:14 +0000)]
tcp: do_tcp_sendpages() must try to push data out on oom conditions

Since recent changes on TCP splicing (starting with commits 2f533844
"tcp: allow splice() to build full TSO packets" and 35f9c09f "tcp:
tcp_sendpages() should call tcp_push() once"), I started seeing
massive stalls when forwarding traffic between two sockets using
splice() when pipe buffers were larger than socket buffers.

Latest changes (net: netdev_alloc_skb() use build_skb()) made the
problem even more apparent.

The reason seems to be that if do_tcp_sendpages() fails on out of memory
condition without being able to send at least one byte, tcp_push() is not
called and the buffers cannot be flushed.

After applying the attached patch, I cannot reproduce the stalls at all
and the data rate it perfectly stable and steady under any condition
which previously caused the problem to be permanent.

The issue seems to have been there since before the kernel migrated to
git, which makes me think that the stalls I occasionally experienced
with tux during stress-tests years ago were probably related to the
same issue.

This issue was first encountered on 3.0.31 and 3.2.17, so please backport
to -stable.

Signed-off-by: Willy Tarreau <w@1wt.eu>
Acked-by: Eric Dumazet <edumazet@google.com>
Cc: <stable@vger.kernel.org>
12 years agoMerge branch '3.4-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target...
Linus Torvalds [Thu, 17 May 2012 20:25:17 +0000 (13:25 -0700)]
Merge branch '3.4-urgent' of git://git./linux/kernel/git/nab/target-pending

Pull two more target-core updates from Nicholas Bellinger:
 "The first patch addresses a SPC-2 reservations RELEASE bug in a
  special (iscsi specific) multi-ISID setup case that was allowing the
  same initiator to be able to incorrect release it's own reservation on
  a different SCSI path with enforce_pr_isid=1 operation.  This bug was
  caught by Bernhard Kohl.

  The second patch is to address a bug with FILEIO backends where the
  incorrect number of blocks for READ_CAPACITY was being reported after
  an underlying device-mapper block_device size change.  This patch uses
  now i_size_read() in fd_get_blocks() for FILEIO backends with an
  underlying block_device, instead of trying to determine this value at
  setup time during fd_create_virtdevice().  (hch CC'ed)

  Both are CC'ed to stable."

* '3.4-urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending:
  target: Fix bug in handling of FILEIO + block_device resize ops
  target: Fix SPC-2 RELEASE bug for multi-session iSCSI client setups

12 years agotarget: Fix bug in handling of FILEIO + block_device resize ops
Nicholas Bellinger [Wed, 16 May 2012 23:05:26 +0000 (16:05 -0700)]
target: Fix bug in handling of FILEIO + block_device resize ops

This patch fixes a bug in the handling of FILEIO w/ underlying block_device
resize operations where the original fd_dev->fd_dev_size was incorrectly being
used in fd_get_blocks() for READ_CAPACITY response payloads.

This patch avoids using fd_dev->fd_dev_size for FILEIO devices with
an underlying block_device, and instead changes fd_get_blocks() to
get the sector count directly from i_size_read() as recommended by hch.

Reported-by: Christoph Hellwig <hch@lst.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
12 years agoMerge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma
Linus Torvalds [Thu, 17 May 2012 16:57:13 +0000 (09:57 -0700)]
Merge branch 'fixes' of git://git.infradead.org/users/vkoul/slave-dma

Pull slave-dmaengine fixes fromVinod Koul:
 "fixes of cylic dma usages in slave dma drivers"

* 'fixes' of git://git.infradead.org/users/vkoul/slave-dma:
  dmaengine: fix cyclic dma usage
  dmaengine: pl330: dont complete descriptor for cyclic dma

12 years agoMerge tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost
Linus Torvalds [Thu, 17 May 2012 16:55:58 +0000 (09:55 -0700)]
Merge tag 'for_linus' of git://git./linux/kernel/git/mst/vhost

Pull last minute virtio fixes from Michael S. Tsirkin:
 "Here are a couple of last minute virtio fixes for 3.4.  Hope it's not
  too late yes - I might have tried too hard to make sure the fix is
  well tested.

  Fixes are by Amit and myself.  One fixes module removal and one
  suspend of a VM, the last one the handling of out of memory condition.

  They are thus very low risk as most people never hit these paths, but
  do fix very annoying problems for people that do use the feature.

Signed-off-by: Michael S. Tsirkin <mst@redhat.com>"
* tag 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mst/vhost:
  virtio_net: invoke softirqs after __napi_schedule
  virtio: balloon: let host know of updated balloon size before module removal
  virtio: console: tell host of open ports after resume from s3/s4

12 years agoMerge tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm...
Linus Torvalds [Thu, 17 May 2012 16:46:07 +0000 (09:46 -0700)]
Merge tag 'fixes-for-linus' of git://git./linux/kernel/git/arm/arm-soc

Pull ARM: SoC fixes from Olof Johansson:
 "I will stop trying to predict when we're done with fixes for a
  release.

  Here's another small batch of three patches for arm-soc:

   - A fix for a boot time WARN_ON() due to irq domain conversion on
     PRIMA2
   - Fix for a regression in Tegra SMP spinup code due to swapped
     register offsets
   - Fixed config dependency for mv_cesa crypto driver to avoid build
     breakage"

* tag 'fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: PRIMA2: fix irq domain size and IRQ mask of internal interrupt controller
  crypto: mv_cesa requires on CRYPTO_HASH to build
  ARM: tegra: Fix flow controller accesses

12 years agoMerge tag 'md-3.4-fixes' of git://neil.brown.name/md
Linus Torvalds [Thu, 17 May 2012 16:44:35 +0000 (09:44 -0700)]
Merge tag 'md-3.4-fixes' of git://neil.brown.name/md

Pull two md fixes from NeilBrown:
 "One fixes a bug in the new raid10 resize code so is relevant to 3.4
  only.

  The other fixes a bug in the use of md by dm-raid, so is relevant to
  any kernel with dm-raid support"

* tag 'md-3.4-fixes' of git://neil.brown.name/md:
  MD: Add del_timer_sync to mddev_suspend (fix nasty panic)
  md/raid10: set dev_sectors properly when resizing devices in array.

12 years agoMerge branches 'perf-urgent-for-linus', 'x86-urgent-for-linus' and 'sched-urgent...
Linus Torvalds [Thu, 17 May 2012 16:35:17 +0000 (09:35 -0700)]
Merge branches 'perf-urgent-for-linus', 'x86-urgent-for-linus' and 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf, x86 and scheduler updates from Ingo Molnar.

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  tracing: Do not enable function event with enable
  perf stat: handle ENXIO error for perf_event_open
  perf: Turn off compiler warnings for flex and bison generated files
  perf stat: Fix case where guest/host monitoring is not supported by kernel
  perf build-id: Fix filename size calculation

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86, kvm: KVM paravirt kernels don't check for CPUID being unavailable
  x86: Fix section annotation of acpi_map_cpu2node()
  x86/microcode: Ensure that module is only loaded on supported Intel CPUs

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  sched: Fix KVM and ia64 boot crash due to sched_groups circular linked list assumption

12 years agoARM: 7419/1: vfp: fix VFP flushing regression on sigreturn path
Will Deacon [Tue, 15 May 2012 14:51:54 +0000 (15:51 +0100)]
ARM: 7419/1: vfp: fix VFP flushing regression on sigreturn path

Commit ff9a184c ("ARM: 7400/1: vfp: clear fpscr length and stride bits
on entry to sig handler") flushes the VFP state prior to entering a
signal handler so that a VFP operation inside the handler will trap and
force a restore of ABI-compliant registers. Reflushing and disabling VFP
on the sigreturn path is predicated on the saved thread state indicating
that VFP was used by the handler -- however for SMP platforms this is
only set on context-switch, making the check unreliable and causing VFP
register corruption in userspace since the register values are not
necessarily those restored from the sigframe.

This patch unconditionally flushes the VFP state after a signal handler.
Since we already perform the flush before the handler and the flushing
itself happens lazily, the redundant flush when VFP is not used by the
handler is essentially a nop.

Reported-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Jon Medhurst <tixy@linaro.org>
Signed-off-by: Will Deacon <will.deacon@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoARM: 7418/1: LPAE: fix access flag setup in mem_type_table
Vitaly Andrianov [Tue, 15 May 2012 14:01:16 +0000 (15:01 +0100)]
ARM: 7418/1: LPAE: fix access flag setup in mem_type_table

A zero value for prot_sect in the memory types table implies that
section mappings should never be created for the memory type in question.
This is checked for in alloc_init_section().

With LPAE, we set a bit to mask access flag faults for kernel mappings.
This breaks the aforementioned (!prot_sect) check in alloc_init_section().

This patch fixes this bug by first checking for a non-zero
prot_sect before setting the PMD_SECT_AF flag.

Signed-off-by: Vitaly Andrianov <vitalya@ti.com>
Acked-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agovirtio_net: invoke softirqs after __napi_schedule
Michael S. Tsirkin [Wed, 16 May 2012 07:57:12 +0000 (10:57 +0300)]
virtio_net: invoke softirqs after __napi_schedule

__napi_schedule might raise softirq but nothing
causes do_softirq to trigger, so it does not in fact
run. As a result,
the error message "NOHZ: local_softirq_pending 08"
sometimes occurs during boot of a KVM guest when the network service is
started and we are oom:

  ...
  Bringing up loopback interface:  [  OK  ]
  Bringing up interface eth0:
  Determining IP information for eth0...NOHZ: local_softirq_pending 08
   done.
  [  OK  ]
  ...

Further, receive queue processing might get delayed
indefinitely until some interrupt triggers:
virtio_net expected napi to be run immediately.

One way to cause do_softirq to be executed is by
invoking local_bh_enable(). As __napi_schedule is
normally called from bh or irq context, this
seems to make sense: disable bh before __napi_schedule
and enable afterwards.

In fact it's a very complicated way of calling do_softirq(),
and works since this function is only used when we are not
in interrupt context.  It's not hot at all, in any ideal scenario.

Reported-by: Ulrich Obergfell <uobergfe@redhat.com>
Tested-by: Ulrich Obergfell <uobergfe@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
Acked-by: Rusty Russell <rusty@rustcorp.com.au>
12 years agovirtio: balloon: let host know of updated balloon size before module removal
Amit Shah [Thu, 26 Apr 2012 19:15:56 +0000 (00:45 +0530)]
virtio: balloon: let host know of updated balloon size before module removal

When the balloon module is removed, we deflate the balloon, reclaiming
all the pages that were given to the host.  However, we don't update the
config values for the new balloon size, resulting in the host showing
outdated balloon values.

The size update is done after each leak and fill operation, only the
module removal case was left out.

Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
12 years agovirtio: console: tell host of open ports after resume from s3/s4
Amit Shah [Wed, 25 Apr 2012 09:10:39 +0000 (14:40 +0530)]
virtio: console: tell host of open ports after resume from s3/s4

If a port was open before going into one of the sleep states, the port
can continue normal operation after restore.  However, the host has to
be told that the guest side of the connection is open to restore
pre-suspend state.

This wasn't noticed so far due to a bug in qemu that was fixed recently
(which marked the guest-side connection as always open).

CC: stable@vger.kernel.org # Only for 3.3
Signed-off-by: Amit Shah <amit.shah@redhat.com>
Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
12 years agosh: Fix mistake of the member variable of plat_sci_port for SH7343
Nobuhiro Iwamatsu [Tue, 15 May 2012 01:26:11 +0000 (10:26 +0900)]
sh: Fix mistake of the member variable of plat_sci_port for SH7343

The current code was going to initialize irq of plat_sci_port.
Not irq, irqs is right.

Signed-off-by: Nobuhiro Iwamatsu <nobuhiro.iwamatsu.yj@renesas.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
12 years agoARM: PRIMA2: fix irq domain size and IRQ mask of internal interrupt controller
Barry Song [Thu, 17 May 2012 03:28:55 +0000 (11:28 +0800)]
ARM: PRIMA2: fix irq domain size and IRQ mask of internal interrupt controller

the old codes will cause 3.4 kernel warning as irq domain size is wrong:
------------[ cut here ]------------
WARNING: at kernel/irq/irqdomain.c:74 irq_domain_legacy_revmap+0x24/0x48()
Modules linked in:
[<c0013f50>] (unwind_backtrace+0x0/0xf8) from [<c001e7d8>] (warn_slowpath_common+0x54/0x64)
[<c001e7d8>] (warn_slowpath_common+0x54/0x64) from [<c001e804>] (warn_slowpath_null+0x1c/0x24)
[<c001e804>] (warn_slowpath_null+0x1c/0x24) from [<c005c3c4>] (irq_domain_legacy_revmap+0x24/0x48)
[<c005c3c4>] (irq_domain_legacy_revmap+0x24/0x48) from [<c005c704>] (irq_create_mapping+0x20/0x120)
[<c005c704>] (irq_create_mapping+0x20/0x120) from [<c005c880>] (irq_create_of_mapping+0x7c/0xf0)
[<c005c880>] (irq_create_of_mapping+0x7c/0xf0) from [<c01a6c48>] (irq_of_parse_and_map+0x2c/0x34)
[<c01a6c48>] (irq_of_parse_and_map+0x2c/0x34) from [<c01a6c68>] (of_irq_to_resource+0x18/0x74)
[<c01a6c68>] (of_irq_to_resource+0x18/0x74) from [<c01a6ce8>] (of_irq_count+0x24/0x34)
[<c01a6ce8>] (of_irq_count+0x24/0x34) from [<c01a7220>] (of_device_alloc+0x58/0x158)
[<c01a7220>] (of_device_alloc+0x58/0x158) from [<c01a735c>] (of_platform_device_create_pdata+0x3c/0x80)
[<c01a735c>] (of_platform_device_create_pdata+0x3c/0x80) from [<c01a7468>] (of_platform_bus_create+0xc8/0x190)
[<c01a7468>] (of_platform_bus_create+0xc8/0x190) from [<c01a74cc>] (of_platform_bus_create+0x12c/0x190)
---[ end trace 1b75b31a2719ed32 ]---

Signed-off-by: Barry Song <Baohua.Song@csr.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
12 years agoMD: Add del_timer_sync to mddev_suspend (fix nasty panic)
Jonathan Brassow [Wed, 16 May 2012 09:06:14 +0000 (04:06 -0500)]
MD: Add del_timer_sync to mddev_suspend (fix nasty panic)

Use del_timer_sync to remove timer before mddev_suspend finishes.

We don't want a timer going off after an mddev_suspend is called.  This is
especially true with device-mapper, since it can call the destructor function
immediately following a suspend.  This results in the removal (kfree) of the
structures upon which the timer depends - resulting in a very ugly panic.
Therefore, we add a del_timer_sync to mddev_suspend to prevent this.

Cc: stable@vger.kernel.org
Signed-off-by: NeilBrown <neilb@suse.de>
12 years agomd/raid10: set dev_sectors properly when resizing devices in array.
NeilBrown [Thu, 17 May 2012 00:08:45 +0000 (10:08 +1000)]
md/raid10: set dev_sectors properly when resizing devices in array.

raid10 stores dev_sectors in 'conf' separately from the one in
'mddev' because it can have a very significant effect on block
addressing and so need to be updated carefully.

However raid10_resize isn't updating it at all!

To update it correctly, we need to make sure it is a proper
multiple of the chunksize taking various details of the layout
in to account.
This calculation is currently done in setup_conf.   So split it
out from there and call it from raid10_resize as well.
Then set conf->dev_sectors properly.

Signed-off-by: NeilBrown <neilb@suse.de>
12 years agoMerge git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Wed, 16 May 2012 21:30:51 +0000 (14:30 -0700)]
Merge git://git.kernel.org/pub/scm/virt/kvm/kvm

Pull kvm powerpc fixes from Marcelo Tosatti:
 "Urgent KVM PPC updates, quoting Alexander Graf:

    There are a few bugs in 3.4 that really should be fixed before
    people can be all happy and fuzzy about KVM on PowerPC.  These fixes
    are:

     * fix POWER7 bare metal with PR=y
     * fix deadlock on HV=y book3s_64 mode in low memory cases
     * fix invalid MMU scope of PR=y mode on book3s_64, possibly eading
       to memory corruption"

* git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: PPC: Book3S HV: Fix bug leading to deadlock in guest HPT updates
  powerpc/kvm: Fix VSID usage in 64-bit "PR" KVM
  KVM: PPC: Book3S: PR: Fix hsrr code
  KVM: PPC: Fix PR KVM on POWER7 bare metal
  KVM: PPC: Book3S: PR: Handle EMUL_ASSIST

12 years agoMerge tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound
Linus Torvalds [Wed, 16 May 2012 21:29:45 +0000 (14:29 -0700)]
Merge tag 'sound-3.4' of git://git./linux/kernel/git/tiwai/sound

Pull sound fixes from Takashi Iwai:
 "A few last-minute regression fixes for 3.4 final kernel.  All trivial,
  and Cc'ed to stable kernel."

* tag 'sound-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound:
  ASoC: wm8994: Fix AIF2ADC power down
  ALSA: hda/idt - Fix power-map for speaker-pins with some HP laptops
  ASoC: cs42l73: Sync digital mixer kcontrols to allow for 0dB

12 years agoMerge tag 'rproc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad...
Linus Torvalds [Wed, 16 May 2012 21:26:05 +0000 (14:26 -0700)]
Merge tag 'rproc-for-linus' of git://git./linux/kernel/git/ohad/remoteproc

Pull remoteproc fix from Ohad Ben-Cohen:
 "Fix a nasty off-by-one remoteproc bug which leaks memory when a remote
  processor is shut down and, on certain circumstances, can indirectly
  prevent it from being reloaded."

* tag 'rproc-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ohad/remoteproc:
  remoteproc: fix off-by-one bug in __rproc_free_vrings

12 years agoMerge git://git.samba.org/sfrench/cifs-2.6
Linus Torvalds [Wed, 16 May 2012 21:22:38 +0000 (14:22 -0700)]
Merge git://git.samba.org/sfrench/cifs-2.6

Pull CIFS fix from Jeff Layton

* git://git.samba.org/sfrench/cifs-2.6:
  cifs: fix misspelling of "forcedirectio"

12 years agoMerge branch 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux...
Linus Torvalds [Wed, 16 May 2012 21:21:41 +0000 (14:21 -0700)]
Merge branch 'stable' of git://git./linux/kernel/git/cmetcalf/linux-tile

Pull two Tile arch fixes from Chris Metcalf:
 "These are both bug-fixes, one to avoid some issues in how we invoke
  the "pending userspace work" flags on return to userspace, and the
  other to provide the same signal handler arguments for tilegx32 that
  we do for tilegx64."

* 'stable' of git://git.kernel.org/pub/scm/linux/kernel/git/cmetcalf/linux-tile:
  arch/tile: apply commit 74fca9da0 to the compat signal handling as well
  arch/tile: fix up some issues in calling do_work_pending()

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Wed, 16 May 2012 20:14:52 +0000 (13:14 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking tree from David Miller:

1) ptp_pch driver build broke during this merge window due to missing
   slab.h header, fix from Geery Uytterhoeven.

2) If ipset passes in a bogus hash table size we crash because the size
   is not validated properly.  Compounding this, gcc-4.7 can miscompile
   ipset such that even when the user specifies legitimate parameters
   the tool passes in an out-of-range size to the kernel.

   Fix from Jozsef Kadlecsik.

3) Users have reported that the netdev watchdog can trigger with pch_gbe
   devices, and it turns out this is happening because of races in the
   TX path of the driver leading to the transmitter hanging.  Fix from
   Eric Dumazet, reported and tested by Andy Cress.

4) Novatel USB551L devices match the generic class entries for the cdc
   ethernet USB driver, but they don't work because they have generic
   descriptors and thus need FLAG_WWAN to function properly.

   Add the necessary ID table entry to fix this, from Dan Williams.

5) A recursive locking fix in the USBNET driver added a new problem, in
   that packet list traversal is now racy and we can thus access
   unlinked SKBs and crash.

   Avoid this situation by adding some extra state tracking, from Ming
   Lei.

6) The rtlwifi conversion to asynchronous firmware loading is racy, fix
   by reordering the probe procedure.  From Larry Finger.

Fixes: https://bugzilla.kernel.org/show_bug.cgi?id=43187
7) Fix regressions with bluetooth keyboards by notifying userland
   properly when the security level changes, from Gustavo Padovan.

8) Bluetooth needs to make sure device connected events are emitted
   before other kinds of events, otherwise userspace will think there is
   no baseband link yet and therefore abort the sockets associated with
   that connection.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  netfilter: ipset: fix hash size checking in kernel
  ptp_pch: Add missing #include <linux/slab.h>
  pch_gbe: fix transmit races
  cdc_ether: add Novatel USB551L device IDs for FLAG_WWAN
  usbnet: fix skb traversing races during unlink(v2)
  Bluetooth: mgmt: Fix device_connected sending order
  Bluetooth: notify userspace of security level change
  rtlwifi: fix for race condition when firmware is cached

12 years agoarch/tile: apply commit 74fca9da0 to the compat signal handling as well
Chris Metcalf [Wed, 16 May 2012 18:54:20 +0000 (14:54 -0400)]
arch/tile: apply commit 74fca9da0 to the compat signal handling as well

This passes siginfo and mcontext to tilegx32 signal handlers that
don't have SA_SIGINFO set just as we have been doing for tilegx64.

Cc: stable@vger.kernel.org
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agoarch/tile: fix up some issues in calling do_work_pending()
Chris Metcalf [Sat, 28 Apr 2012 22:51:43 +0000 (18:51 -0400)]
arch/tile: fix up some issues in calling do_work_pending()

First, we were at risk of handling thread-info flags, in particular
do_signal(), when returning from kernel space.  This could happen
after a failed kernel_execve(), or when forking a kernel thread.
The fix is to test in do_work_pending() for user_mode() and return
immediately if so; we already had this test for one of the flags,
so I just hoisted it to the top of the function.

Second, if a ptraced process updated the callee-saved registers
in the ptregs struct and then processed another thread-info flag, we
would overwrite the modifications with the original callee-saved
registers.  To fix this, we add a register to note if we've already
saved the registers once, and skip doing it on additional passes
through the loop.  To avoid a performance hit from the couple of
extra instructions involved, I modified the GET_THREAD_INFO() macro
to be guaranteed to be one instruction, then bundled it with adjacent
instructions, yielding an overall net savings.

Reported-By: Al Viro <viro@ZenIV.linux.org.uk>
Signed-off-by: Chris Metcalf <cmetcalf@tilera.com>
12 years agonetfilter: ipset: fix hash size checking in kernel
Jozsef Kadlecsik [Mon, 14 May 2012 01:47:01 +0000 (01:47 +0000)]
netfilter: ipset: fix hash size checking in kernel

The hash size must fit both into u32 (jhash) and the max value of
size_t. The missing checking could lead to kernel crash, bug reported
by Seblu.

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoptp_pch: Add missing #include <linux/slab.h>
Geert Uytterhoeven [Wed, 16 May 2012 01:50:17 +0000 (01:50 +0000)]
ptp_pch: Add missing #include <linux/slab.h>

drivers/ptp/ptp_pch.c: In function 'pch_remove':
drivers/ptp/ptp_pch.c:576:2: error: implicit declaration of function 'kfree' [-Werror=implicit-function-declaration]
drivers/ptp/ptp_pch.c: In function 'pch_probe':
drivers/ptp/ptp_pch.c:587:2: error: implicit declaration of function 'kzalloc' [-Werror=implicit-function-declaration]

Signed-off-by: Geert Uytterhoeven <geert@linux-m68k.org>
Acked-by: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agocifs: fix misspelling of "forcedirectio"
Jeff Layton [Wed, 16 May 2012 11:12:26 +0000 (07:12 -0400)]
cifs: fix misspelling of "forcedirectio"

...and add a "directio" synonym since that's what the manpage has
always advertised.

Acked-by: Sachin Prabhu <sprabhu@redhat.com>
Signed-off-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Steve French <sfrench@us.ibm.com>
12 years agoARM: prevent VM_GROWSDOWN mmaps extending below FIRST_USER_ADDRESS
Russell King [Wed, 16 May 2012 14:19:20 +0000 (15:19 +0100)]
ARM: prevent VM_GROWSDOWN mmaps extending below FIRST_USER_ADDRESS

Cc: <stable@vger.kernel.org>
Reported-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>
12 years agoMerge branch 'for-3.4/fixes-for-final' of git://git.kernel.org/pub/scm/linux/kernel...
Arnd Bergmann [Wed, 16 May 2012 13:47:11 +0000 (15:47 +0200)]
Merge branch 'for-3.4/fixes-for-final' of git://git./linux/kernel/git/swarren/linux-tegra into fixes

* 'for-3.4/fixes-for-final' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
  ARM: tegra: Fix flow controller accesses

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
12 years agoMerge branch 'marvell_fixes_for_v3.4' of git://git.infradead.org/users/jcooper/linux...
Arnd Bergmann [Wed, 16 May 2012 13:44:34 +0000 (15:44 +0200)]
Merge branch 'marvell_fixes_for_v3.4' of git://git.infradead.org/users/jcooper/linux into fixes

* 'marvell_fixes_for_v3.4' of git://git.infradead.org/users/jcooper/linux:
  crypto: mv_cesa requires on CRYPTO_HASH to build

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
12 years agoKVM: PPC: Book3S HV: Fix bug leading to deadlock in guest HPT updates
Paul Mackerras [Wed, 9 May 2012 23:49:24 +0000 (23:49 +0000)]
KVM: PPC: Book3S HV: Fix bug leading to deadlock in guest HPT updates

When handling the H_BULK_REMOVE hypercall, we were forgetting to
invalidate and unlock the hashed page table entry (HPTE) in the case
where the page had been paged out.  This fixes it by clearing the
first doubleword of the HPTE in that case.

This fixes a regression introduced in commit a92bce95f0 ("KVM: PPC:
Book3S HV: Keep HPTE locked when invalidating").  The effect of the
regression is that the host kernel will sometimes hang when under
memory pressure.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Signed-off-by: Alexander Graf <agraf@suse.de>
12 years agopowerpc/kvm: Fix VSID usage in 64-bit "PR" KVM
Benjamin Herrenschmidt [Fri, 23 Mar 2012 00:21:14 +0000 (11:21 +1100)]
powerpc/kvm: Fix VSID usage in 64-bit "PR" KVM

The code forgot to scramble the VSIDs the way we normally do
and was basically using the "proto VSID" directly with the MMU.

This means that in practice, KVM used random VSIDs that could
collide with segments used by other user space programs.

Signed-off-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
[agraf: simplify ppc32 case]
Signed-off-by: Alexander Graf <agraf@suse.de>
12 years agoKVM: PPC: Book3S: PR: Fix hsrr code
Alexander Graf [Thu, 10 May 2012 01:58:50 +0000 (03:58 +0200)]
KVM: PPC: Book3S: PR: Fix hsrr code

When jumping back into the kernel to code that knows that it would be
using HSRR registers instead of SRR registers, we need to make sure we
pass it all information on where to jump to in HSRR registers.

Unfortunately, we used r10 to store the information to distinguish between
the HSRR and SRR case. That register got clobbered in between though,
rendering the later comparison invalid.

Instead, let's use cr1 to store this information. That way we don't
need yet another register and everyone's happy.

This fixes PR KVM on POWER7 bare metal for me.

Signed-off-by: Alexander Graf <agraf@suse.de>
12 years agoKVM: PPC: Fix PR KVM on POWER7 bare metal
Alexander Graf [Fri, 27 Apr 2012 14:33:35 +0000 (16:33 +0200)]
KVM: PPC: Fix PR KVM on POWER7 bare metal

When running on a system that is HV capable, some interrupts use HSRR
SPRs instead of the normal SRR SPRs. These are also used in the Linux
handlers to jump back to code after an interrupt got processed.

Unfortunately, in our "jump back to the real host handler after we've
done the context switch" code, we were only setting the SRR SPRs,
rendering Linux to jump back to some invalid IP after it's processed
the interrupt.

This fixes random crashes on p7 opal mode with PR KVM for me.

Signed-off-by: Alexander Graf <agraf@suse.de>
12 years agoKVM: PPC: Book3S: PR: Handle EMUL_ASSIST
Alexander Graf [Thu, 10 May 2012 01:54:58 +0000 (03:54 +0200)]
KVM: PPC: Book3S: PR: Handle EMUL_ASSIST

In addition to normal "priviledged instruction" traps, we can also receive
"emulation assist" traps on newer hardware that has the HV bit set.

Handle that one the same way as a privileged instruction, including the
instruction fetching. That way we don't execute old instructions that we
happen to still leave in that field when an emul assist trap comes.

This fixes -M mac99 / -M g3beige on p7 bare metal for me.

Signed-off-by: Alexander Graf <agraf@suse.de>
12 years agoMerge branch 'for-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/linville...
David S. Miller [Wed, 16 May 2012 05:03:54 +0000 (01:03 -0400)]
Merge branch 'for-davem' of git://git./linux/kernel/git/linville/wireless

John Linville says:

Here are three more fixes that some of my developers are desperate to
see included in 3.4...

Johan Hedberg went to some length justifyng the inclusion of these two
Bluetooth fixes:

"The device_connected fix should be quite self-explanatory, but it's
actually a wider issue than just for keyboards. All profiles that do
incoming connection authorization (e.g. headsets) will break without it
with specific hardware. The reason it wasn't caught earlier is that it
only occurs with specific Bluetooth adapters.

As for the security level patch, this fixes L2CAP socket based security
level elevation during a connection. The HID profile needs this (for
keyboards) and it is the only way to achieve the security level
elevation when using the management interface to talk to the kernel
(hence the management enabling patch being the one that exposes this"

The rtlwifi fix addresses a regression related to firmware loading,
as described in kernel.org bug 43187.  It basically just moves a hunk
of code to a more appropriate place.

Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agomn10300/CPU hotplug: Add missing call to notify_cpu_starting()
Srivatsa S. Bhat [Tue, 15 May 2012 19:02:37 +0000 (00:32 +0530)]
mn10300/CPU hotplug: Add missing call to notify_cpu_starting()

The scheduler depends on receiving the CPU_STARTING notification, without
which we end up into a lot of trouble. So add the missing call to
notify_cpu_starting() in the bringup code.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoparisc/CPU hotplug: Add missing call to notify_cpu_starting()
Srivatsa S. Bhat [Tue, 15 May 2012 19:02:17 +0000 (00:32 +0530)]
parisc/CPU hotplug: Add missing call to notify_cpu_starting()

The scheduler depends on receiving the CPU_STARTING notification, without
which we end up into a lot of trouble. So add the missing call to
notify_cpu_starting() in the bringup code.

Signed-off-by: Srivatsa S. Bhat <srivatsa.bhat@linux.vnet.ibm.com>
Acked-and-Tested-by: Mikulas Patocka <mpatocka@redhat.com>
Acked-and-Tested-by: Tobias Ulmer <tobiasu@tmux.org>
Tested-by: John David Anglin <dave.anglin@bell.net>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
John W. Linville [Tue, 15 May 2012 20:38:00 +0000 (16:38 -0400)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless into for-davem

12 years agoMerge tag 'asoc-3.4' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound...
Takashi Iwai [Tue, 15 May 2012 19:05:45 +0000 (21:05 +0200)]
Merge tag 'asoc-3.4' of git://git./linux/kernel/git/broonie/sound into for-linus

ASoC: Last minute fixes

Some last minute fixes for ASoC.  Small, focused changes to specific
drivers.

12 years agopch_gbe: fix transmit races
Eric Dumazet [Mon, 14 May 2012 09:26:06 +0000 (09:26 +0000)]
pch_gbe: fix transmit races

Andy reported pch_gbe triggered "NETDEV WATCHDOG" errors.

May 11 11:06:09 kontron kernel: WARNING: at net/sched/sch_generic.c:261
dev_watchdog+0x1ec/0x200() (Not tainted)
May 11 11:06:09 kontron kernel: Hardware name: N/A
May 11 11:06:09 kontron kernel: NETDEV WATCHDOG: eth0 (pch_gbe):
transmit queue 0 timed out

It seems pch_gbe has a racy tx path (races with TX completion path)

Remove tx_queue_lock lock since it has no purpose, we must use tx_lock
instead.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Andy Cress <andy.cress@us.kontron.com>
Tested-by: Andy Cress <andy.cress@us.kontron.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agocdc_ether: add Novatel USB551L device IDs for FLAG_WWAN
Dan Williams [Mon, 7 May 2012 04:24:51 +0000 (04:24 +0000)]
cdc_ether: add Novatel USB551L device IDs for FLAG_WWAN

Needs to be tagged with FLAG_WWAN, which since it has generic
descriptors, won't happen if we don't override the generic
driver info.

Cc: Oliver Neukum <oliver@neukum.org>
Cc: stable@vger.kernel.org
Signed-off-by: Dan Williams <dcbw@redhat.com>
Acked-by: Oliver Neukum <oliver@neukum.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agousbnet: fix skb traversing races during unlink(v2)
Ming Lei [Thu, 26 Apr 2012 03:33:46 +0000 (11:33 +0800)]
usbnet: fix skb traversing races during unlink(v2)

Commit 4231d47e6fe69f061f96c98c30eaf9fb4c14b96d(net/usbnet: avoid
recursive locking in usbnet_stop()) fixes the recursive locking
problem by releasing the skb queue lock before unlink, but may
cause skb traversing races:
- after URB is unlinked and the queue lock is released,
the refered skb and skb->next may be moved to done queue,
even be released
- in skb_queue_walk_safe, the next skb is still obtained
by next pointer of the last skb
- so maybe trigger oops or other problems

This patch extends the usage of entry->state to describe 'start_unlink'
state, so always holding the queue(rx/tx) lock to change the state if
the referd skb is in rx or tx queue because we need to know if the
refered urb has been started unlinking in unlink_urbs.

The other part of this patch is based on Huajun's patch:
always traverse from head of the tx/rx queue to get skb which is
to be unlinked but not been started unlinking.

Signed-off-by: Huajun Li <huajun.li.lee@gmail.com>
Signed-off-by: Ming Lei <tom.leiming@gmail.com>
Cc: Oliver Neukum <oneukum@suse.de>
Cc: stable@kernel.org
Signed-off-by: David S. Miller <davem@davemloft.net>
12 years agoASoC: wm8994: Fix AIF2ADC power down
Mark Brown [Tue, 15 May 2012 17:13:00 +0000 (18:13 +0100)]
ASoC: wm8994: Fix AIF2ADC power down

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: stable@vger.kernel.org
12 years agogenirq: export handle_edge_irq() and irq_to_desc()
Jiri Kosina [Sun, 13 May 2012 10:13:15 +0000 (12:13 +0200)]
genirq: export handle_edge_irq() and irq_to_desc()

Export handle_edge_irq() and irq_to_desc() to modules to allow them to
do things such as

__irq_set_handler_locked(...., handle_edge_irq);

This fixes

ERROR: "handle_edge_irq" [drivers/gpio/gpio-pch.ko] undefined!
ERROR: "irq_to_desc" [drivers/gpio/gpio-pch.ko] undefined!

when gpio-pch is being built as a module.

This was introduced by commit df9541a60af0 ("gpio: pch9: Use proper flow
type handlers") that added

__irq_set_handler_locked(d->irq, handle_edge_irq);

but handle_edge_irq() was not exported for modules (and inlined
__irq_set_handler_locked() requires irq_to_desc() exported as well)

Signed-off-by: Jiri Kosina <jkosina@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
12 years agoALSA: hda/idt - Fix power-map for speaker-pins with some HP laptops
Takashi Iwai [Tue, 15 May 2012 06:07:31 +0000 (08:07 +0200)]
ALSA: hda/idt - Fix power-map for speaker-pins with some HP laptops

BIOS on some HP laptops don't set the speaker-pins as fixed but expose
as jacks, and this confuses the driver as if these pins are
jack-detectable.  As a result, the machine doesn't get sounds from
speakers because the driver prepares the power-map update via jack
unsol events which never come up in reality.  The bug was introduced
in some time in 3.2 for enabling the power-mapping feature.

This patch fixes the problem by replacing the check of the persistent
power-map bits with a proper is_jack_detectable() call.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=43240

Cc: <stable@vger.kernel.org> [v3.2+]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
12 years agodmaengine: fix cyclic dma usage
Vinod Koul [Fri, 11 May 2012 06:18:21 +0000 (11:48 +0530)]
dmaengine: fix cyclic dma usage

for cyclic dma, dont makr the descriptor as complte. Fix the remaining users of
cyclic dma which do so

Signed-off-by: Vinod Koul <vinod.koul@linux.intel.com>
Tested-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Acked-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Tested-by: Mika Westerberg <mika.westerberg@iki.fi>
12 years agocrypto: mv_cesa requires on CRYPTO_HASH to build
Alexander Clouter [Sat, 12 May 2012 08:45:08 +0000 (09:45 +0100)]
crypto: mv_cesa requires on CRYPTO_HASH to build

Without CRYPTO_HASH being selected, mv_cesa has a lot of hooks
into undefined exports.
----
  MODPOST 81 modules
  Kernel: arch/arm/boot/Image is ready
  AS      arch/arm/boot/compressed/head.o
  GZIP    arch/arm/boot/compressed/piggy.gzip
  CC      arch/arm/boot/compressed/misc.o
  CC      arch/arm/boot/compressed/decompress.o
ERROR: "crypto_ahash_type" [drivers/crypto/mv_cesa.ko] undefined!
ERROR: "crypto_shash_final" [drivers/crypto/mv_cesa.ko] undefined!
ERROR: "crypto_register_ahash" [drivers/crypto/mv_cesa.ko] undefined!
ERROR: "crypto_unregister_ahash" [drivers/crypto/mv_cesa.ko] undefined!
ERROR: "crypto_shash_update" [drivers/crypto/mv_cesa.ko] undefined!
ERROR: "crypto_shash_digest" [drivers/crypto/mv_cesa.ko] undefined!
ERROR: "crypto_shash_setkey" [drivers/crypto/mv_cesa.ko] undefined!
ERROR: "crypto_alloc_shash" [drivers/crypto/mv_cesa.ko] undefined!
make[1]: *** [__modpost] Error 1
make: *** [modules] Error 2
make: *** Waiting for unfinished jobs....
----

Signed-off-by: Alexander Clouter <alex@digriz.org.uk>
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Cc: stable@vger.kernel.org
12 years agotarget: Fix SPC-2 RELEASE bug for multi-session iSCSI client setups
Bernhard Kohl [Sun, 13 May 2012 21:39:37 +0000 (23:39 +0200)]
target: Fix SPC-2 RELEASE bug for multi-session iSCSI client setups

This patch addresses a bug in a special case for target core SPC-2 RELEASE
logic where the same physical client (eg: iSCSI InitiatorName) with
differing iSCSI session identifiers (ISID) is allowed to incorrectly release
the same client's SPC-2 reservation from the non reservation holding path.

Note this bug is specific to iscsi-target w/ SPC-2 reservations, and
with the default enforce_pr_isids=1 device attr setting in target-core
controls if a InitiatorName + different ISID reservations are handled
the same as a single iSCSI client entity.

Signed-off-by: Bernhard Kohl <bernhard.kohl@gmx.net>
Cc: <stable@vger.kernel.org>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>
12 years agoMerge branch 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab...
Linus Torvalds [Mon, 14 May 2012 18:23:37 +0000 (11:23 -0700)]
Merge branch 'v4l_for_linus' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:
 "For a some fix patches for v3.4, including a regression fix at DVB core"

Fix up trivial conflicts in Documentation/feature-removal-schedule.txt

* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] gspca - sonixj: Fix a zero divide in isoc interrupt
  [media] media: videobuf2-dma-contig: include header for exported symbols
  [media] media: videobuf2-dma-contig: quiet sparse noise about plain integer as NULL pointer
  [media] media: vb2-memops: Export vb2_get_vma symbol
  [media] s5p-fimc: Correct memory allocation for VIDIOC_CREATE_BUFS
  [media] s5p-fimc: Fix locking in subdev set_crop op
  [media] dvb_frontend: fix a regression with DVB-S zig-zag
  [media] fintek-cir: change || to &&
  [media] V4L: Schedule V4L2_CID_HCENTER, V4L2_CID_VCENTER controls for removal
  [media] rc: Postpone ISR registration
  [media] marvell-cam: fix an ARM build error
  [media] V4L: soc-camera: protect hosts during probing from overzealous user-space

12 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net
Linus Torvalds [Mon, 14 May 2012 18:19:32 +0000 (11:19 -0700)]
Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:
 "The main purpose of this pull request is to fix up the erroneous
  bonding patch I applied last round.  I meant to apply v4 of the patch
  from Jiri but I applied v3 by accident.  Mea culpa.

  Also, eagle eyed Dan Carpenter noticed that openvswitch has one of
  those "X = alloc(); if (!Y)" mistakes, test the proper pointer
  instead."

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net:
  openvswitch: checking wrong variable in queue_userspace_packet()
  bonding: Fix LACPDU rx_dropped commit.

12 years agoBluetooth: mgmt: Fix device_connected sending order
Johan Hedberg [Sat, 12 May 2012 19:11:50 +0000 (16:11 -0300)]
Bluetooth: mgmt: Fix device_connected sending order

The mgmt_ev_device_connected signal must be sent before any event
indications happen for sockets associated with the connection. Otherwise
e.g. device authorization for the sockets will fail with ENOTCONN as
user space things that there is no baseband link.

This patch fixes the issue by ensuring that the device_connected event
if sent (if it hasn't been so already) as soon as the first ACL data
packet arrives from the remote device.

Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoBluetooth: notify userspace of security level change
Gustavo Padovan [Sun, 13 May 2012 06:20:07 +0000 (03:20 -0300)]
Bluetooth: notify userspace of security level change

It fixes L2CAP socket based security level elevation during a
connection. The HID profile needs this (for keyboards) and it is the only
way to achieve the security level elevation when using the management
interface to talk to the kernel (hence the management enabling patch
being the one that exposes this issue).

It enables the userspace a security level change when the socket is
already connected and create a way to notify the socket the result of the
request. At the moment of the request the socket is made non writable, if
the request fails the connections closes, otherwise the socket is made
writable again, POLL_OUT is emmited.

Signed-off-by: Gustavo Padovan <gustavo@padovan.org>
Acked-by: Marcel Holtmann <marcel@holtmann.org>
Signed-off-by: Johan Hedberg <johan.hedberg@intel.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agortlwifi: fix for race condition when firmware is cached
Larry Finger [Fri, 4 May 2012 13:27:43 +0000 (08:27 -0500)]
rtlwifi: fix for race condition when firmware is cached

In commit b0302ab, the rtlwifi family of drivers was converted to use
asynchronous firmware loading. Unfortumately, the implementation was
racy, and the ieee80211 routines could be started before rtl_init_core()
was called to setup the data.

This patch fixes the bug noted in https://bugzilla.kernel.org/show_bug.cgi?id=43187.

Reported-by: Joshua Roys <Joshua.Roys@gtri.gatech.edu>
Tested-by: Neptune Ning <frostyplanet@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Cc: Stable <stable@vger.kernel.org> [3.3]
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agox86, kvm: KVM paravirt kernels don't check for CPUID being unavailable
Alan Cox [Mon, 14 May 2012 17:41:09 +0000 (18:41 +0100)]
x86, kvm: KVM paravirt kernels don't check for CPUID being unavailable

We set cpuid_level to -1 if there is no CPUID instruction (only
possible on i386).

Signed-off-by: Alan Cox <alan@linux.intel.com>
Link: http://lkml.kernel.org/r/20120514174059.30236.1064.stgit@bluebook
Resolves-bug: https://bugzilla.kernel.org/show_bug.cgi?id=12122
Cc: Avi Kivity <avi@redhat.com>
Cc: Marcelo Tosatti <mtosatti@redhat.com>
Signed-off-by: H. Peter Anvin <hpa@linux.intel.com>