Hans Dedecker [Sat, 21 Jan 2017 16:07:54 +0000 (17:07 +0100)]
router: add syslog debug tracing for trouble shooting
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Sat, 21 Jan 2017 15:27:17 +0000 (16:27 +0100)]
treewide: use RELAYD_MAX_ADDRS as address array size
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Sat, 21 Jan 2017 14:40:13 +0000 (15:40 +0100)]
ndp: don't scan netlink attributes in case of netlink route event
In case a netlink route event is received for a default route
netlink data attributes were faulty processed as neigbor netlink
data. Fix this by not processing any netlink attribute for
any route event.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 6 Jan 2017 14:26:17 +0000 (15:26 +0100)]
dhcpv6-ia: filter out prefixes having invalid length
Function append_reply filters out addresses having invalid prefix length
when constructing prefixes being delegated to a client.
Now also filter out addresses with an invalid prefix length when writing
the delegated prefixes in the statefile and during logging of the delegated
prefixes.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 5 Jan 2017 15:03:35 +0000 (16:03 +0100)]
dhcpv6-ia: fix dereference after freeing assignment
Fix assignment dereference by dhcpv6_log in case
the assignment is freed when nothing has been
assigned.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 5 Jan 2017 14:06:07 +0000 (15:06 +0100)]
dhcpv6-ia: log only IPv6 addresses which are effectively assigned to a DHCPv6 client
Fix displaying IPv6 addresses which were not assigned to a DHCPv6 client
Clean up the code by using macro ADDR_ENTRY_VALID_IA_ADDR on different
places to align the checks.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Jo-Philipp Wich [Tue, 3 Jan 2017 13:09:08 +0000 (14:09 +0100)]
config: respect ignore uci option
The odhcpd documentation currently implies that "option ignore 1" in a section
of type "dhcp" will disable any services on the referenced interface while the
code actually ignores the setting when initializing referenced interfaces.
This commonly leads to situations where users think that "option disabled"
will prevent any server activity on a given interface while in reality odhcpd
effectively acts as rogue DHCPv6 server in its default configuration.
To fully inhibit any activity, one has to specify both "option ignore 1" as
well as "option ra disabled", "option ndp disabled" and
"option dhcpv6 disabled" which is highly counter intuitive at best.
A previous commit (
5f425ed Respect interface "ignore" settings as documented.)
attempted to address the problem by observing the value of i->ignore instead
of unconditionally enabling all protocols but broke the ability to use DHCPv6
relay mode while having DHCPv4 disabled.
This patch changes ...
- the enabling of services on an interface to use the value of the ignore
option as default choice instead of hardcoding "true"
- the options "ra", "ndp", "dhcpv4" and "dhcpv6" to take precedence over the
default "ignore" state to allow selectively enabling services on ignored
interfaces
- the README to clarify the fact that "ra", "ndp", "dhcpv4" and "dhcpv6" can
now override "option ignore"
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Acked-by: Karl Palsson <karlp@etactica.com>
Tested-by: Stijn Tintel <stijn@linux-ipv6.be>
Tested-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Tue, 3 Jan 2017 09:42:19 +0000 (10:42 +0100)]
dhcpv6-ia: fix static assignment check
Fix static assignment check failure which was
introduced in commit
561890e
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 2 Jan 2017 16:13:09 +0000 (17:13 +0100)]
dhcpv6-ia: coding style fixes
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 2 Jan 2017 16:10:14 +0000 (17:10 +0100)]
dhcpv6-ia: update valid_until only for non static DHCPv6 leases
Update valid_until lifetime only for non static DHCPv6 leases otherwise
the lifetime of a static lease is not infinite anymore
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 2 Jan 2017 15:29:14 +0000 (16:29 +0100)]
dhcpv4: coding style fixes
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Sat, 31 Dec 2016 09:26:49 +0000 (10:26 +0100)]
README: Add host leasetime uci parameter
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 30 Dec 2016 19:52:05 +0000 (20:52 +0100)]
dhcpv6-ia: fix invalid IPv6/hostname entries in statefile
Statefull IPv6 addresses are assigned to DHCPv6 clients from a
local prefix based on criteria which need to be fulfilled.
One of those criteria requires the IPv6 address still having
preferred lifetime which was not checked when constructing
the contents of the statefile.
Another criteria requires the prefix length not being smaller
than or equal to 64 when ra_management equals 0 or 1 which was
neither correctly checked when constructing the statefile.
This can lead to invalid hostname/IPv6 entries in the statefile
and thus possible connectivity issues when using DNS resolving.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 30 Dec 2016 16:44:44 +0000 (17:44 +0100)]
dhcpv6-ia: fix delete logic of an assignment in reconf_timer
Function free_dhcpv6_assignment already removes the assignment in
the list so there's no need to call list_del in reconf_timer
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 30 Dec 2016 16:34:01 +0000 (17:34 +0100)]
dhcpv6-ia : code style fixes
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 29 Dec 2016 14:17:13 +0000 (15:17 +0100)]
config: use free_lease to delete a lease
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 29 Dec 2016 13:12:08 +0000 (14:12 +0100)]
config: coding style fixes
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 29 Dec 2016 11:33:39 +0000 (12:33 +0100)]
config: Create statefile dir
Create statefile dir if the specified dir does not yet exist
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 28 Dec 2016 22:23:55 +0000 (23:23 +0100)]
dhcpv6-ia: use free_dhcpv6_assignment where needed
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 28 Dec 2016 22:18:54 +0000 (23:18 +0100)]
dhcpv6-ia: make free_dhcpv6_assignment static
Further align coding style
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 28 Dec 2016 22:07:47 +0000 (23:07 +0100)]
dhcpv4: make dhcpv4_msg_to_string static
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Wed, 28 Dec 2016 09:57:30 +0000 (10:57 +0100)]
dhcpv4: fix DHCPv4 hostname handling
Fix hostname not being reported as "-" in the DHCP statefile in case
no hostname is reported by the DHCPv4 client
(https://:wqgithub.com/openwrt/odhcpd/issues/94)
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 15 Dec 2016 21:37:47 +0000 (22:37 +0100)]
Limit lifetime of non-static leases in case of release and decline
In case infinite leasetime is assigned to a non static DHCPv4/v6 lease
override the infinite lifetime of the lease when either a DHCPv4/v6
decline or release is received.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Stijn Tintel [Tue, 27 Dec 2016 08:40:21 +0000 (09:40 +0100)]
Revert "Respect interface "ignore" settings as documented."
This reverts commit
5f425ed1e5f92397e27ec4f44820b6ef677b8134.
Both dnsmasq and odhcpd use the ignore option. This is fine for normal
operation, but it breaks DHCPv6 relay when dnsmasq is disabled on the
wan interface.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Stijn Tintel [Sun, 14 Aug 2016 17:22:57 +0000 (20:22 +0300)]
router: skip parse_routes when ra_default > 1
It does not make sense to scan the entire routing table if the decision
will be overridden afterwards.
This makes it possible to use odhcpd on a router with full IPv6 BGP
table, by setting ra_default to 2. Without this change, odhcpd is
constantly busy reading /proc/net/ipv6_route, and doesn't respond to
router solicitations in time.
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Hans Dedecker [Wed, 14 Dec 2016 21:22:22 +0000 (22:22 +0100)]
Don't print non bound assignments in the state file
Set bound flag for DHCPv4 and DHCPv6 assignments when the IPv6/IPv4 address
is leased to a client.
This will prevent the printing of leases and hostname/IPv4/IPv6 address
combinations in the state file for for which the IPv4/6 address has not
been assigned.
Also this will fix the printing of assignments which have been declined
by the clients
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 5 Dec 2016 08:57:12 +0000 (09:57 +0100)]
config: Fix RA interface config being overwritten
In case multiple dhcp uci sections are configured and one section contains
RA config while the other section does not; the RA interface config of the
first section will be overwritten by the second section.
Fix this by setting the default values for ra_management and ndp_proxy_routing
uci parameters when the interface is created and by removing the overwrite check
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 1 Dec 2016 13:24:24 +0000 (14:24 +0100)]
dhcpv6-ia : Fix static DHCPv6 assignments becoming non static
The valid_until parameter which is set to 0 for static DHCPv6
assignments was overwritten depending on the received DHCPv6 message
which turned the assignment into having a finite lifetime and thus not
static anymore.
Fix this by checking if the valid_until parameter holds infinite
lifetime before updating it.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 1 Dec 2016 13:24:23 +0000 (14:24 +0100)]
dhcpv6-ia: Fix assignment of static DHCPv6 leases
Fix assignment of static DHCPv6 leases which was broken
by commit
6c3bc0141dacc88992583d6f2cdc8a360df7422d.
At the same time fix lifetime check of existing assignments
having a finite lifetime
Fixes FS#309
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Florian Fainelli [Sat, 2 Jul 2016 00:05:17 +0000 (17:05 -0700)]
cmake: Find libubox/uloop.h
Add a CMake FIND_PATH and INCLUDE_DIRECTORIES searching for
libubox/uloop.h. Some external toolchains which do not include standard
locations would fail to find the header otherwise.
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Hans Dedecker [Mon, 21 Nov 2016 13:42:16 +0000 (14:42 +0100)]
odhcpd: Display infinite valid lifetime as -1
Display infinite valid lifetime as -1 both in ubus
and statefile
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Karl Palsson [Wed, 28 Sep 2016 16:32:41 +0000 (16:32 +0000)]
Respect interface "ignore" settings as documented.
The "ignore" option is correctly loaded. Actually observe it as
documented.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Karl Palsson [Wed, 28 Sep 2016 16:32:39 +0000 (16:32 +0000)]
enable loglevel setting via command line
Currently the loglevel is hardcoded to LOG_WARNING, even though there is
debug log messages. Allow setting the loglevel via cli option.
Include basic help text because we're adding command line options.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Hans Dedecker [Thu, 17 Nov 2016 15:12:00 +0000 (16:12 +0100)]
dhcpv4: Adding DHCP client leasetime request support
Add support for DHCPv4 clients proposing a leasetime;
proposed leasetime will be accepted if it does not
exceed either the pool or configured lease leastime.
Further rework the duplicated leasetime logic which
was in place.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 17 Nov 2016 15:11:59 +0000 (16:11 +0100)]
dhcpv6-ia: Display infinite lifetime as INT32_MAX in state file
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 17 Nov 2016 15:11:58 +0000 (16:11 +0100)]
ubus: Fix displayed valid paramater for both DHCPv4 and DHCPv6 lease
Fix ubus valid parameter being displayed as a negative number;
also display infinite lifetime as INT32_MAX
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 17 Nov 2016 15:11:57 +0000 (16:11 +0100)]
dhcpv4: Keep DHCPv4 assignment lifetime value in sync with assigned leasetime
Keep the valid_until assignment parameter in sync with the
leasetime assigned to the DHCP client when handling DHCP
request message.
This guarantees the contents of the ubus dhcp ipv4leases valid
parameter is in sync with the client leasetime
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Thu, 17 Nov 2016 15:11:56 +0000 (16:11 +0100)]
config: Support infinite as DHCP pool leasetime value
Add support for infinite leasetime value; this can be done by
specifying "infinite" as leasetime value which is similar to
dnsmasq infinite leasetime support.
Specifying "infinite" as leasetime is valid for both the host
and dhcp uci sections.
A DHCPv4/DHCPv6 assignment is now considered infinite if valid_unil
holds the value 0.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Massimiliano Stucchi [Wed, 22 Jun 2016 08:22:41 +0000 (10:22 +0200)]
Correct a typo
Karl Palsson [Thu, 22 Sep 2016 17:32:18 +0000 (17:32 +0000)]
odhcpd: remove superfluous log output.
Drop pointless syslog. The single line just doubles the amount of lines
logged to syslog without adding any value.
Signed-off-by: Karl Palsson <karlp@etactica.com>
Steven Barth [Thu, 19 May 2016 06:54:24 +0000 (08:54 +0200)]
Add per-host leasetime support
Patch by Daniel Dickinson
Signed-off-by: Steven Barth <steven@midlink.org>
Steven Barth [Sun, 31 Jan 2016 15:19:05 +0000 (16:19 +0100)]
Merge pull request #68 from dedeckeh/bugfixes
config: blobmsg_check_attr expects bool type as last argument
Hans Dedecker [Tue, 15 Dec 2015 14:32:33 +0000 (15:32 +0100)]
config: blobmsg_check_attr expects bool type as last argument
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Steven Barth [Sun, 29 Nov 2015 11:51:28 +0000 (12:51 +0100)]
Merge pull request #67 from dedeckeh/bugfixes
Fix interface ifname overwrite in case UCI dhcp section contains ifname or networkid parameter
Hans Dedecker [Fri, 27 Nov 2015 12:34:01 +0000 (13:34 +0100)]
config: Prioritize ifname resolving via ubus over ifname/networkid attributes
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Fri, 27 Nov 2015 10:30:41 +0000 (11:30 +0100)]
config: Close interface when ifindex cannot be resolved
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Steven Barth [Tue, 17 Nov 2015 07:44:07 +0000 (08:44 +0100)]
fall through in error case to clear congestion
Steven Barth [Mon, 16 Nov 2015 11:10:24 +0000 (12:10 +0100)]
Handle netlink ENOBUFS events
Steven Barth [Wed, 21 Oct 2015 06:47:26 +0000 (08:47 +0200)]
Merge pull request #63 from willmo/router-lifetime
Clamp router lifetime per RFC 4861
Will Mortensen [Mon, 19 Oct 2015 03:50:56 +0000 (20:50 -0700)]
Don't overflow router lifetime
When a prefix lifetime was greater than UINT16_MAX, we would advertise a
shorter router lifetime (even potentially 0). Saturate instead.
Steven Barth [Wed, 21 Oct 2015 06:07:52 +0000 (08:07 +0200)]
Merge pull request #62 from willmo/dns-lifetime
Correctly byteswap DNS lifetimes in RAs
Will Mortensen [Mon, 19 Oct 2015 03:59:20 +0000 (20:59 -0700)]
Correctly byteswap DNS lifetimes in RAs
Steven Barth [Mon, 7 Sep 2015 13:28:10 +0000 (15:28 +0200)]
dhcpv6: use correct length when copying duid
Steven Barth [Mon, 7 Sep 2015 09:48:05 +0000 (11:48 +0200)]
router: don't announce as default router if we aren't
Steven Barth [Mon, 7 Sep 2015 09:39:19 +0000 (11:39 +0200)]
router: reduce dns lifetime to 10x maximum interval
Steven Barth [Mon, 7 Sep 2015 09:21:58 +0000 (11:21 +0200)]
dhcpv6: fix mac-handling
Steven Barth [Tue, 1 Sep 2015 13:29:31 +0000 (15:29 +0200)]
Fixup RAs/DHCPv6 announcing incorrect addresses
Steven Barth [Thu, 20 Aug 2015 09:33:23 +0000 (11:33 +0200)]
router/dhcpv6: use link-local addresses for DNS
Steven Barth [Thu, 20 Aug 2015 08:45:31 +0000 (10:45 +0200)]
router: improve deprecation handling
Steven Barth [Thu, 20 Aug 2015 08:42:09 +0000 (10:42 +0200)]
Merge pull request #56 from sbyx/revert-46-master
Revert "RFC: dhcpv4 support openwrt alias ip addr"
Steven Barth [Thu, 20 Aug 2015 08:42:02 +0000 (10:42 +0200)]
Revert "RFC: dhcpv4 support openwrt alias ip addr"
Steven Barth [Thu, 20 Aug 2015 06:12:30 +0000 (08:12 +0200)]
Merge pull request #54 from dedeckeh/bugfixes
Fixes compile issues and infinite lifetimes
Steven Barth [Thu, 20 Aug 2015 05:47:02 +0000 (07:47 +0200)]
Merge pull request #46 from stargieg/master
RFC: dhcpv4 support openwrt alias ip addr
Hans Dedecker [Mon, 10 Aug 2015 16:31:46 +0000 (18:31 +0200)]
router: Fix infinite lifetimes
Hans Dedecker [Mon, 10 Aug 2015 16:07:13 +0000 (18:07 +0200)]
router: Fix compile issues
Fix compile issue due to comparison between signed and unsigned integers
Steven Barth [Mon, 27 Jul 2015 21:21:57 +0000 (23:21 +0200)]
ra/dhcpv6: unify address change handling
Steven Barth [Fri, 24 Jul 2015 13:46:55 +0000 (15:46 +0200)]
Fix RA lifetimes
Steven Barth [Fri, 17 Jul 2015 11:06:19 +0000 (13:06 +0200)]
dhcpv6: fix socket generation on relay master
Steven Barth [Fri, 17 Jul 2015 08:46:07 +0000 (10:46 +0200)]
dhcpv6: send relay-forward messages using correct socket
Steven Barth [Wed, 15 Jul 2015 07:37:52 +0000 (09:37 +0200)]
router: unify RA router and DNS lifetime
Steven Barth [Wed, 15 Jul 2015 06:56:53 +0000 (08:56 +0200)]
router: fixup RA lifetime calculation
Steven Barth [Tue, 14 Jul 2015 19:49:57 +0000 (21:49 +0200)]
router: fix invalid router lifetime
Steven Barth [Tue, 14 Jul 2015 19:44:08 +0000 (21:44 +0200)]
router: fix logic inversion
Steven Barth [Tue, 14 Jul 2015 18:49:02 +0000 (20:49 +0200)]
ndp: reintroduce address replay
Steven Barth [Tue, 14 Jul 2015 15:56:38 +0000 (17:56 +0200)]
Remove unsolicited unicast RAs, adjust intervals
Steven Barth [Tue, 14 Jul 2015 09:05:31 +0000 (11:05 +0200)]
ndp: fixup relay
Steven Barth [Mon, 13 Jul 2015 21:08:19 +0000 (23:08 +0200)]
ndp: remove bindtodevice workaround
Steven Barth [Mon, 13 Jul 2015 21:01:19 +0000 (23:01 +0200)]
odhcpd: remove old workaround
Steven Barth [Mon, 13 Jul 2015 20:46:25 +0000 (22:46 +0200)]
ndp: fixup route replication
Steven Barth [Mon, 13 Jul 2015 20:14:07 +0000 (22:14 +0200)]
router: only send RAs to neighbors if unsolicited
Steven Barth [Mon, 13 Jul 2015 20:08:17 +0000 (22:08 +0200)]
router: only send direct RAs to link-local addresses
Steven Barth [Tue, 7 Jul 2015 14:04:05 +0000 (16:04 +0200)]
main: fix missing parameter while iterating neighbors
Steven Barth [Tue, 7 Jul 2015 14:01:13 +0000 (16:01 +0200)]
router: also send RAs to every known neighbor
Steven Barth [Tue, 7 Jul 2015 13:42:55 +0000 (15:42 +0200)]
ndp: replay on-link routes instead of address assignments
Steven Barth [Tue, 30 Jun 2015 09:06:20 +0000 (11:06 +0200)]
ra: keep alive neighbor entries so we can send unicast RAs in the future
Patrick Grimm [Mon, 22 Jun 2015 14:22:36 +0000 (16:22 +0200)]
dhcpv4: remove unused addr_attrs struct
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
Patrick Grimm [Mon, 22 Jun 2015 14:16:04 +0000 (16:16 +0200)]
dhcpv4: add ifdef ubus for dhcp4 ip
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
Patrick Grimm [Thu, 18 Jun 2015 23:30:29 +0000 (01:30 +0200)]
dhcpv4: add in_addr dhcpv4_mask and in_addr dhcpv4_addr to struct interface
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
Patrick Grimm [Thu, 18 Jun 2015 02:45:45 +0000 (04:45 +0200)]
dhcpv4: fix unitialization of mask
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
Patrick Grimm [Thu, 18 Jun 2015 02:27:24 +0000 (04:27 +0200)]
dhcpv4: fix char ubus_get_address4 int ubus_get_mask4 function
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
Patrick Grimm [Mon, 15 Jun 2015 01:39:59 +0000 (03:39 +0200)]
dhcpv4: add ubus_get_address4 ubus_get_mask4 function
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
Patrick Grimm [Mon, 15 Jun 2015 01:38:09 +0000 (03:38 +0200)]
dhcpv4: return pointer
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
Patrick Grimm [Mon, 15 Jun 2015 01:36:15 +0000 (03:36 +0200)]
dhcpv4: use iface-name
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
Patrick Grimm [Sun, 14 Jun 2015 22:43:28 +0000 (00:43 +0200)]
dhcpv4: remove comment code lines
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
Patrick Grimm [Sun, 14 Jun 2015 22:39:32 +0000 (00:39 +0200)]
dhcpv4: use ubus for ipv4 dhcp range calculation
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
Patrick Grimm [Sun, 14 Jun 2015 22:35:50 +0000 (00:35 +0200)]
dhcpv4: add for_each ipv4-address array in ubus_get_address4 ubus_get_mask4 function
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
Patrick Grimm [Sun, 14 Jun 2015 20:55:50 +0000 (22:55 +0200)]
dhcpv4: add ubus_get_address4 ubus_get_mask4 function
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
Patrick Grimm [Sun, 14 Jun 2015 19:43:20 +0000 (21:43 +0200)]
dhcpv4: read ipv4-address from UBUS to ADDRESS4
Signed-off-by: Patrick Grimm <patrick@lunatiki.de>
Steven Barth [Thu, 21 May 2015 14:21:59 +0000 (16:21 +0200)]
dhcpv6: fix typo
Steven Barth [Wed, 13 May 2015 12:29:51 +0000 (14:29 +0200)]
dhcpv6-pd: ignore /64 on interface