sc1200: always tune PIO

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

cs5530: always tune PIO

Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-cris: always tune PIO

Acked-by: Mikael Starvik <starvik@axis.com>
Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

slc90e66: always tune PIO

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

aec62xx: always tune PIO

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

sis5513: always tune PIO

* Always set ->autotune in init_hwif_sis5513(), this means practically
  no change in behavior since PIO was always tuned in ->ide_dma_check
  and >autotune was always set for ->dma_base == 0 case.

* Bump driver version.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

sis5513: DMA setup fixes

* Add sis_ata133_get_base() helper function for obtaining the address of
  the drive control registers on chipset_family == ATA_133 chipsets.

* Add three helper functions for programming PIO/MWDMA timings:
  - sis_ata16_program_timings()  (for ATA_16/33/66/100a chipset families)
  - sis_ata100_program_timings() (for ATA_100/133a chipset families)
  - sis_ata133_program_timings() (for ATA_133 chipset family)

  MWDMA timings are taken from datasheets and they match ATA spec.

* Add generic helper function sis_program_timings() and use it in
  ->set_pio_mode and ->set_dma_mode methods (previously the driver
  depended on BIOS to program the correct MWDMA timings).

* Remove redundant !chipset_family check from init_hwif_sis5513()
  (init_chipset_sis5513() guarantees that we will never get here if
   chipset_family cannot be determined).

* SWDMA seems to be unsupported by SiS chipsets (no info about SWDMA in
  datasheets and for SWDMA0 mode timing requirements are impossible to
  fulfill) so remove ->swdma_mask from init_hwif_sis5513() and handling
  of SWDMA modes from sis_set_dma_mode().

* Enable DMA support for chipset_family == ATA_16.

* Bump driver version.

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

hpt366: always tune PIO

Acked-by: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide-cs: Add additional id string (corsair, 1GB)

This patch adds id strings for Corsair 1GB (identified as Hyperstone Model1)
inside legacy/ide-cs.c.

It also includes some minor whitespace cleanups.

Signed-off-by: Kristoffer Ericson <kristoffer.ericson@gmail.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide: fix serverworks.c UDMA regression

The patch described by the following excerpt from ChangeLog-2.6.22 makes
it impossible to use UDMA on a Tyan S2707 motherboard (SvrWks CSB5):

commit 2d5eaa6dd744a641e75503232a01f52d0768884c
Author: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>
Date:   Thu May 10 00:01:08 2007 +0200

    ide: rework the code for selecting the best DMA transfer mode (v3)

    ...

This one-line patch against 2.6.23 fixes the problem.

Signed-off-by: Tony Battersby <tonyb@cybernetics.com>
Signed-off-by: Bartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Merge git://git./linux/kernel/git/sam/kbuild

* git://git.kernel.org/pub/scm/linux/kernel/git/sam/kbuild: (40 commits)
  kbuild: introduce ccflags-y, asflags-y and ldflags-y
  kbuild: enable 'make CPPFLAGS=...' to add additional options to CPP
  kbuild: enable use of AFLAGS and CFLAGS on commandline
  kbuild: enable 'make AFLAGS=...' to add additional options to AS
  kbuild: fix AFLAGS use in h8300 and m68knommu
  kbuild: check for wrong use of CFLAGS
  kbuild: enable 'make CFLAGS=...' to add additional options to CC
  kbuild: fix up CFLAGS usage
  kbuild: make modpost detect unterminated device id lists
  kbuild: call export_report from the Makefile
  kbuild: move Kai Germaschewski to CREDITS
  kconfig/menuconfig: distinguish between selected-by-another options and comments
  kconfig: tristate choices with mixed tristate and boolean values
  include/linux/Kbuild: remove duplicate entries
  kbuild: kill backward compatibility checks
  kbuild: kill EXTRA_ARFLAGS
  kbuild: fix documentation in makefiles.txt
  kbuild: call make once for all targets when O=.. is used
  kbuild: pass -g to assembler under CONFIG_DEBUG_INFO
  kbuild: update _shipped files for kconfig syntax cleanup
  ...

Fix up conflicts in arch/um/sys-{x86_64,i386}/Makefile manually.

Merge branch 'upstream' of git://ftp.linux-mips.org/upstream-linus

* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus:
  [MIPS] Increase cp0 compare clockevent min_delta_ns from 0x30 to 0x300.
  [MIPS] Cache: Provide more information on cache policy on bootup.
  [MIPS] Fix aliasing bug in copy_user_highpage, take 2.
  [MIPS] VPE loader: convert from struct class_ device to struct device
  [MIPS] MIPSsim: Fix booting from NFS root
  [MIPS] Alchemy: Get rid of au1xxx_irq_map_t.
  [MIPS] Alchemy: Get rid of au_ffz().
  [MIPS] Alchemy: Get rid of au_ffs().
  [MIPS] Alchemy: cleanup interrupt code.
  [MIPS] Lasat: Fix build by conversion to irq_cpu.c.
  [MIPS] Lasat: Add #ifndef ... #endif include warpper to lasatint.h.
  [MIPS] IP22: Enable -Werror.
  [MIPS] IP22: Fix warning.
  [MIPS] IP22: Complain if requesting the front panel irq failed.
  [MIPS] vmlinux.lds.S: Handle KPROBES_TEXT.
  [MIPS] vmlinux.lds.S: Fix handling of .notes in final link.
  [MIPS] vmlinux.lds.S: Remove duplicate comment.
  [MIPS] MSP71XX: Add workarounds file.
  [MIPS] IP32: Fix build by conversion to irq_cpu.c.

[MIPS] Increase cp0 compare clockevent min_delta_ns from 0x30 to 0x300.

Extremly low values are of dubious usefulness anyway but in this case
they actually were killing Qemu which simply wasn't able to complete
mips_next_event() within 0x30 100MHz cycles even on fast hosts.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Cache: Provide more information on cache policy on bootup.

This should help making bug reports for the gadzillion of cores with all
their configuration and synthesis options more useful.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Fix aliasing bug in copy_user_highpage, take 2.

Turns out b868868ae0f7272228c95cc760338ffe35bb739d  wasn't quite right.
When called for a page that isn't marked dirty it would artificially
create an alias instead of doing the obvious thing and access the page
via KSEG0.

The same issue also exists in copy_to_user_page and copy_from_user_page
which was causing the machine to die under rare circumstances for example
when running ps if the BUG_ON() assertion added by the earlier fix was
getting triggered.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] VPE loader: convert from struct class_ device to struct device

Signed-off-by: Kay Sievers <kay.sievers@vrfy.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] MIPSsim: Fix booting from NFS root

MIPSsim probably doesn't have any sort of environment, but writing
a zero in it kills even the compiled in command line. This prevents
booting via NFS root.

Signed-Off-By: Thiemo Seufer <ths@networkno.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Alchemy: Get rid of au1xxx_irq_map_t.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Alchemy: Get rid of au_ffz().

There were no users - and why have a private version anyway.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Alchemy: Get rid of au_ffs().

It was plain a bad idea ...

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Alchemy: cleanup interrupt code.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Lasat: Fix build by conversion to irq_cpu.c.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] Lasat: Add #ifndef ... #endif include warpper to lasatint.h.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] IP22: Enable -Werror.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] IP22: Fix warning.

  CC      arch/mips/sgi-ip22/ip22-berr.o
arch/mips/sgi-ip22/ip22-berr.c: In function 'ip22_be_interrupt':
arch/mips/sgi-ip22/ip22-berr.c:100: warning: passing argument 2 of 'die_if_kernel' discards qualifiers from pointer target type

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] IP22: Complain if requesting the front panel irq failed.

This fixes the warning:

  CC      arch/mips/sgi-ip22/ip22-reset.o
arch/mips/sgi-ip22/ip22-reset.c: In function 'reboot_setup':
arch/mips/sgi-ip22/ip22-reset.c:239: warning: ignoring return value of 'request_irq', declared with attribute warn_unused_result

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] vmlinux.lds.S: Handle KPROBES_TEXT.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] vmlinux.lds.S: Fix handling of .notes in final link.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] vmlinux.lds.S: Remove duplicate comment.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] MSP71XX: Add workarounds file.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

[MIPS] IP32: Fix build by conversion to irq_cpu.c.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Merge branch 'linus' of /linux/kernel/git/perex/alsa

* 'linus' of master.kernel.org:/pub/scm/linux/kernel/git/perex/alsa: (264 commits)
  [ALSA] version 1.0.15
  [ALSA] Fix thinko in cs4231 mce down check
  [ALSA] sun-cs4231: improved waiting after MCE down
  [ALSA] sun-cs4231: use cs4231-regs.h
  [ALSA] This simplifies and fixes waiting loops of the mce_down()
  [ALSA] This patch adds support for a wavetable chip on
  [ALSA] This patch removes open_mutex from the ad1848-lib as
  [ALSA] fix bootup crash in snd_gus_interrupt()
  [ALSA] hda-codec - Fix SKU ID function for realtek codecs
  [ALSA] Support  ASUS P701 eeepc [0x1043 0x82a1] support
  [ALSA] hda-codec - Add array terminator for dmic in STAC codec
  [ALSA] hdsp - Fix zero division
  [ALSA] usb-audio - Fix double comment
  [ALSA] hda-codec - Fix STAC922x volume knob control
  [ALSA] Changed Jaroslav Kysela's e-mail from perex@suse.cz to perex@perex.cz
  [ALSA] hda-codec - Fix for Fujitsu Lifebook C1410
  [ALSA] mpu-401: remove MPU401_INFO_UART_ONLY flag
  [ALSA] mpu-401: do not require an ACK byte for the ENTER_UART command
  [ALSA] via82xx - Add DXS quirk for Shuttle AK31v2
  [ALSA] hda-codec - Fix input_mux numbers for vaio stac92xx
  ...

Merge branch 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block

* 'for-linus' of git://git.kernel.dk/data/git/linux-2.6-block: (63 commits)
  Fix memory leak in dm-crypt
  SPARC64: sg chaining support
  SPARC: sg chaining support
  PPC: sg chaining support
  PS3: sg chaining support
  IA64: sg chaining support
  x86-64: enable sg chaining
  x86-64: update pci-gart iommu to sg helpers
  x86-64: update nommu to sg helpers
  x86-64: update calgary iommu to sg helpers
  swiotlb: sg chaining support
  i386: enable sg chaining
  i386 dma_map_sg: convert to using sg helpers
  mmc: need to zero sglist on init
  Panic in blk_rq_map_sg() from CCISS driver
  remove sglist_len
  remove blk_queue_max_phys_segments in libata
  revert sg segment size ifdefs
  Fixup u14-34f ENABLE_SG_CHAINING
  qla1280: enable use_sg_chaining option
  ...

time: introduce xtime_seconds

improve performance of sys_time(). sys_time() returns time in seconds,
but it does so by calling do_gettimeofday() and then returning the
tv_sec portion of the GTOD time. But the data structure "xtime", which
is updated by every timer/scheduler tick, already offers HZ granularity
time.

the patch improves the sysbench oltp macrobenchmark by 4-5% on an AMD
dual-core system:

v2.6.23:

#threads

   1:     transactions:                        4073   (407.23 per sec.)
   2:     transactions:                        8530   (852.81 per sec.)
   3:     transactions:                        8321   (831.88 per sec.)
   4:     transactions:                        8407   (840.58 per sec.)
   5:     transactions:                        8070   (806.74 per sec.)

v2.6.23 + sys_time-speedup.patch:

   1:     transactions:                        4281   (428.09 per sec.)
   2:     transactions:                        8910   (890.85 per sec.)
   3:     transactions:                        8659   (865.79 per sec.)
   4:     transactions:                        8676   (867.34 per sec.)
   5:     transactions:                        8532   (852.91 per sec.)

and by 4-5% on an Intel dual-core system too:

2.6.23:

  1:     transactions:                        4560   (455.94 per sec.)
  2:     transactions:                        10094  (1009.30 per sec.)
  3:     transactions:                        9755   (975.36 per sec.)
  4:     transactions:                        9859   (985.78 per sec.)
  5:     transactions:                        9701   (969.72 per sec.)

2.6.23 + sys_time-speedup.patch:

  1:     transactions:                        4779   (477.84 per sec.)
  2:     transactions:                        10103  (1010.14 per sec.)
  3:     transactions:                        10141  (1013.93 per sec.)
  4:     transactions:                        10371  (1036.89 per sec.)
  5:     transactions:                        10178  (1017.50 per sec.)

(the more CPUs the system has, the more speedup this patch gives for
this particular workload.)

Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CREDITS: correct Mikael Pettersson's URL

New URL due to local reorganization.

powerpc32 vDSO: linker script indentation

This cleans up the formatting in the vDSO linker script, mostly just the
use of whitespace.  It's intended to approximate the kernel standard
conventions for indenting C, treating elements of the linker script about
like initialized variable definitions.

Signed-off-by: Roland McGrath <roland@redhat.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

powerpc64 vDSO: linker script indentation

This cleans up the formatting in the vDSO linker script, mostly just the
use of whitespace.  It's intended to approximate the kernel standard
conventions for indenting C, treating elements of the linker script about
like initialized variable definitions.

Signed-off-by: Roland McGrath <roland@redhat.com>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SH vDSO: linker script indentation

This cleans up the formatting in the vDSO linker script, mostly just the
use of whitespace.  It's intended to approximate the kernel standard
conventions for indenting C, treating elements of the linker script about
like initialized variable definitions.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ia64 vDSO: linker script indentation

This cleans up the formatting in the vDSO linker script, mostly just the
use of whitespace.  It's intended to approximate the kernel standard
conventions for indenting C, treating elements of the linker script about
like initialized variable definitions.

Signed-off-by: Roland McGrath <roland@redhat.com>
Cc: Sam Ravnborg <sam@ravnborg.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lockdep: fixup the inode dir annotation

A slight oversight tripped lockdep debugging code, each lockdep
class should have but a single init site.

Rearange the code to make this true.

Signed-off-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

scsi_mac.h: Define AUTOSENSE before include of NCR5380.h

  - Previese patch to NCR5380 broke scsi_mac because
    AUTOSENSE was defined after the inclusion of
    NCR5380.h. Fix it

Signed-off-by: Boaz Harrosh <bharrosh@panasas.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

net/sunrpc/xprtrdma/verbs.c printk warning fix

sparc64:

net/sunrpc/xprtrdma/verbs.c:1264: warning: long long unsigned int format, u64 arg (arg 3)
net/sunrpc/xprtrdma/verbs.c:1264: warning: long long unsigned int format, u64 arg (arg 4)

Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tgafb: remove a redundant non-mono test in mono imageblit

There is a test in tgafb_mono_imageblit() for a colour image with a fall-back
to cfb_imageblit().  The test is not necessary as the only caller, which is
tgafb_imageblit(), checks it too and only invokes this function for monochrome
images.  It looks like a left-over from before some changes to
tgafb_imageblit().

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Jay Estabrook <Jay.Estabrook@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tgafb: fix an out-of-range shift in mono imageblit

The pixel mask calculation in tgafb_mono_imageblit() uses a variable
left-shift on a 32-bit data type by up to 32.  Shifting by the width of a data
type or more produces an unpredictable result according to the C standard.

Rather than widening the data type this fix makes sure the count is between 0
and 31.  The reason is not to penalise 32-bit platforms with operation on a
"long long" type for a marginal case that is meant not to happen (blitting an
image of a zero width).

The reason it has escaped for so long is the Alpha, being purely 64-bit, :-)
does not mask the shift out to 32 bits.  This is a valid implementation --
producing the correct result certainly falls within "unpredictable behaviour".
 It does trigger on MIPS though and it is the recent merge of the TC support
which only enabled the driver for use on anything other than the Alpha.  For
MIPS when the width is 32 the mask ends up being 0 rather than 0xffffffff as
it should be and the frame buffer is not updated.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Antonino Daplas <adaplas@pol.net>
Cc: Jay Estabrook <Jay.Estabrook@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbcon: delay the start of the cursor timer until a con_switch()

As reported in Bugzilla Bug 9093, upon switching to X, a small rectangular
cursor can still be seen blinking in the upper left part of the screen.  It is
fbcon's text cursor.  This is caused by a strange ioctl(..., KDSETMODE,
KD_TEXT) call done by something in userspace, perhaps by X itself, while the
tty is still in graphics mode.  And when the tty is in KD_TEXT mode, the
cursor timer is restarted.

Although this is a userspace problem, we can work around it by delaying the
restart of the cursor timer until an fbcon_switch() is called.  In other
words, the cursor timer will not be restarted even if a KD_TEXT mode switch is
requested.

Regression potential: Present but low

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: copyarea function taught to fully support swapped pixel order in byte

This correct case, when source and destination X coordinates difference is n
multiple of pixels in byte.  This is probably rare case, but this case should
supported for completeness.

Reorganization of FB_READL and FB_WRITEL calls results in code size decrease
for normal build without swapping support and size with support enabled is
reasonable too.

[adaplas]
Add missing fb_rev_pixels_in_long() prototype.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
[akpm@linux-foundation.org: coding-style fixes]
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

s3fb: do not allow incorrect pixclock settings

This patch adds check if selected pixclock is valid (is in the PLL range).

Previously, if the pixclock could not be set, the new mode resolution was set
but pixclock was not set which led to incorrect timings sent to monitor.

[adaplas]
Fixed a few misplaced curly braces.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

svgalib: mode selection updates

This patch changes mode selection matching algorithm.  It allows to choose
mode with matching depth even when requested color lengths are greater than
color lengths of every mode with requested color depth.

It also fixes bug in s3fb - wrong error value returned when format is not
supported by chip.

Signed-off-by: Ondrej Zajicek <santiago@crfreenet.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3fb: default to 480p on DVI-D/HDMI if video=safe

Default to the 480p video mode on DVI-D and HDMI displays if `video=safe' is
passed on the kernel command line.

This is intended to be used by `kboot'-style boot loaders (i.e. first-stage
kernels) for the PS3, to provide a failsafe video mode.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fb: move and rename extern declaration for global_mode_option

Move the extern declaration for global_mode_option to <linux/fb.h> and rename
the variable to fb_mode_option.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3fb: enhance horizontal panning on firmware 1.90 and up

ps3fb: Enhance horizontal panning on firmware 1.90 and up:
  - On firmware 1.90 and up, L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT supports copying
    rectangles from XDR to DDR memory with different source and destination
    line lengths. Hence larger horizontal virtual resolutions can be supported
    (up to 16368 pixels).
  - As the actual frame buffer memory layout no longer matches the entries in
    ps3fb_res[], create fake struct ps3fb_ioctl_res data for the
    PS3FB_IOCTL_SCREENINFO ioctl, so user space applications that depend on it
    keep on working.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3fb: add virtual screen and panning support

ps3fb: Add virtual screen and panning support:
  - The vertical virtual screen size is limited by the amount of memory
    reserved for ps3fb,
  - The horizontal virtual screen size is limited to the fullscreen width,
  - Advertise that we support panning, so fbcon will use it if the virtual
    screen is enabled.
    Enabling a virtual screen (using `fbset -vyres nnn') can speed up text
    console scrolling by a factor of 10-15, depending on the video mode.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3fb: don't keep the borders for non-fullscreen modes in XDR memory

Don't keep the borders for non-fullscreen modes in XDR memory:
  - Extract ps3fb_sync_image()
  - Work around the alignment restrictions of L1GPU_CONTEXT_ATTRIBUTE_FB_BLIT
    by using an offset with L1GPU_CONTEXT_ATTRIBUTE_DISPLAY_FLIP
  - Only copy the visible part of the screen on every vblank
  - Always put the real frame buffer at the start of video memory
  - Clear fullscreen DDR memory on mode change

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3fb: use fb_info.par properly

ps3fb: Use fb_info.par properly:
  o Move mode-specific fields into struct ps3fb_par
  o Allocate struct ps3fb_par using framebuffer_alloc()
  o Protect access to ps3fb_par in ps3fb_sync() using the console semaphore
    (this semaphore is already held when ps3fb_set_par() is called)
  o Avoid calling ps3av_set_video_mode() if the actual video mode hasn't
    changed

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3fb: fix possible overlap of GPU command buffer and frame buffer

ps3fb: In the case of non-fullscreen video modes, there was a partial overlap
of the GPU command buffer and the frame buffer. Fix and cleanup various issues
with overlap and alignment:
  - Move the GPU command buffer from the beginning to the end of video memory
  - Exclude the GPU command buffer from the actual frame buffer memory
  - Align the start of the virtual frame buffer to PAGE_SIZE instead of to 64
    KiB, and don't waste memory if it's already aligned (for fullscreen modes)
  - Take into account the alignment when checking memory requirements and
    maximum number of frames
  - Make sure fb_fix_screeninfo.smem_start always points to the virtual frame
    buffer start, so we don't have to compensate for that in ps3fb_mmap()

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3fb: make ps3fb_wait_for_vsync() and ps3fb_flip_ctl() static

Make ps3fb_wait_for_vsync() and ps3fb_flip_ctl() static, as they're no
(longer) used outside ps3fb.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3fb: clean up includes

Clean up includes

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3fb: do not print warnings on invalid frame numbers

Do not print warnings on invalid frame numbers, as this can be triggered from
user space.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3fb: convert from printk()/DPRINTK() to dev_*()/pr_*()

Convert ps3fb from printk()/DPRINTK() to dev_*()/pr_*()

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

imxfb: fast read flag and nonstandard field configurable

The i.MX frame-buffer read operation should be faster for all configurations
then drawing each individual character again in response to scroll events.

The nonstandard fields allows to configure frame-buffer special options flags
for different display configurations by board specific initialization code.

One of such specific options is reversed order of pixels in each individual
byte.  i.MX frame-buffer seems to be designed for big-endian use first.  The
byte order is correctly configured for little-endian ordering, but if 1, 2 or
4 bits per pixel are used, pixels ordering is incompatible to Linux generic
frame-buffer drawing functions.

The patch "Allow generic BitBLT functions to work with swapped pixel order in
bytes" introduces required functionality into FBDEV core.  The pixels ordering
selection has to be enabled at compile time CONFIG_FB_CFB_REV_PIXELS_IN_BYTE
and for each display configuration which requires it by flag
FB_NONSTD_REV_PIX_IN_B in "nonstd" field of info structure.

This patch provides way for board specific code to select this option.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3av: dont distinguish between `boot' and `non-boot' autodetection

don't distinguish between `boot' and `non-boot' autodetection now the
autodetection code has been improved

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3av: remove unused ps3av_set_mode()

remove unused ps3av_set_mode()

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3av: add quirk database for broken monitors

add a quirk database for broken monitors where the `best' advertised
video mode doesn't work

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3av: add autodetection for VESA modes

add autodetection for VESA modes

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3av: treat DVI-D like HDMI in autodetect

treat DVI-D monitors like HDMI monitors when autodetecting the best video mode

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3av: use PS3 video mode ids in autodetect code

It doesn't make much sense to use the PS3AV_CMD_VIDEO_VID_* values in the
autodetection code, just to convert them to PS3 video mode ids afterwards.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3av: eliminate PS3AV_DEBUG

ps3av: eliminate PS3AV_DEBUG
  - Move ps3av_cmd_av_monitor_info_dump from ps3av_cmd.c to ps3av.c, as
it's
    used there only
  - Integrate ps3av_cmd_av_hw_conf_dump() into its sole user
  - Use pr_debug() for printing debug info

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3av: eliminate unneeded temporary variables

ps3av: eliminate unneeded temporary variables

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

video gfx: merge kconfig menus

Move AGP and DRM menus into the video graphics support menu.
  They use 'menuconfig' so that they can all be disabled with
  one selection.
Make the console menu use 'menuconfig' so that it can all be
  disabled with one selection.
Make the frame buffer menu use 'menuconfig' so that it can all be
  disabled with one selection.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Acked-by: Dave Airlie <airlied@linux.ie>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

bf54x-lq043fb: framebuffer driver for Blackfin BF54x framebuffer device driver

Blackfin BF54x framebuffer device driver for a SHARP LQ043T1DG01 TFT LCD

[adaplas]
Add 'fb' suffix to driver name.
Move Makefile entry under platform device section

Signed-off-by: Michael Hennerich <michael.hennerich@analog.com>
Signed-off-by: Bryan Wu <bryan.wu@analog.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbcon: logo: disable logo at boot

Add logo.nologo kernel boot option to disable the logo in order to provide
more screen space for kernel messages; especially useful when debugging and
screen space is more critical.

newport_con driver changes are untested.

[akpm@linux-foundation.org: cleanups, coding-style fixes]
Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pmagb-b-fb: improve diagnostics

Add error messages to the probe call.

[adaplas]
On failure, return actual error value instead of -ENXIO.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nvidiafb: Correctly assign the i2c class with the port reversal

If the i2c ports are to be reversed, I2C_CLASS_HWMON assignment must also be
reversed.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vt/vgacon: Check if screen resize request comes from userspace

Various console drivers are able to resize the screen via the con_resize()
hook.  This hook is also visible in userspace via the TIOCWINSZ, VT_RESIZE and
VT_RESIZEX ioctl's.  One particular utility, SVGATextMode, expects that
con_resize() of the VGA console will always return success even if the
resulting screen is not compatible with the hardware.  However, this
particular behavior of the VGA console, as reported in Kernel Bugzilla Bug
7513, can cause undefined behavior if the user starts with a console size
larger than 80x25.

To work around this problem, add an extra parameter to con_resize().  This
parameter is ignored by drivers except for vgacon.  If this parameter is
non-zero, then the resize request came from a VT_RESIZE or VT_RESIZEX ioctl
and vgacon will always return success.  If this parameter is zero, vgacon will
return -EINVAL if the requested size is not compatible with the hardware.  The
latter is the more correct behavior.

With this change, SVGATextMode should still work correctly while in-kernel and
stty resize calls can expect correct behavior from vgacon.

Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

video gfx: fix menu ordering

Move video graphics driver configs to fix menus:

Fix FB_PMAGB_B to depend on FB so that the FB menus remain
  listed in order and indented correctly.
Fix FB_IBM_GXT4500 to depend on FB so that the FB menus remain
  listed in order and indented correctly.
The OMAP FB drivers still muck up the FB menu a bit, so I put
  OMAP drivers at the end of the FB menu.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Intel FB: more interlaced mode support

Intel FB: allow odd- and even-field-first in interlaced modes, and
proper sync to vertical retrace

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: <sylvain.meyer@worldonline.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Intel FB: force even line count in interlaced mode

Intel FB: the chip adds two halflines automatically in interlaced mode,
force even line count for the right timings.

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: <sylvain.meyer@worldonline.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Intel FB: obvious changes and corrections

Intel FB: obvious changes and corrections

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: <sylvain.meyer@worldonline.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Intel FB: whitespace, bracket and other clean-ups

Intel FB: whitespace, bracket and other clean-ups

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: <sylvain.meyer@worldonline.fr>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/pmag-ba-fb.c: improve diagnostics

Add error messages to the probe call.

While they may rarely trigger, they may be useful when something weird is
going on.  Also this is good style.

[akpm@linux-foundation.org: remove unneeded initialisation]
Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Radeonfb Xpress 200M RC410 support

Make radeonfb work ith the 200m Xpress RC410.  In my tests it was terribly
unstable and would freeze until I set a refresh rate in the kernel argument
to 75.

e.g video=radeonfb:1280x800@75

Now it is rock solid.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

export font_vga_8x16

mips allmodconfig:

ERROR: "font_vga_8x16" [drivers/video/console/newport_con.ko] undefined!

Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

drivers/video/Kconfig: Fix FB_PMAGB_B dependencies

Add a missing FB dependency to FB_PMAGB_B.

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tdfxfb: checkpatch fixes

This patch fixes all errors pointed by the checkpatch.pl script.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pm3fb: replace busy waiting with cpu_relax

This patch replaces busy waiting with the cpu_relax() call.  This makes
scrolling faster.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pm2fb: replace busy waiting with cpu_relax

This patch replaces busy waiting with the cpu_relax() call.  This makes
scrolling faster.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

tdfxfb: replace busy waiting with cpu_relax

This patch replaces busy waiting with cpu_relax() call.  This makes scrolling
faster.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: Update Documentation/fb/00-INDEX

An update to Documentation/fb/00-INDEX is long overdue.  This patch adds
entries for new files in the directory and removes entries for files that no
longer exist.  The files are now also sorted alphabetically.

Signed-off-by: Jesper Juhl <jesper.juhl@gmail.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3fb: Fix spurious mode change failures

ps3fb: Add a `mode' parameter to ps3fb_get_res_table(), as in some cases it
should check the full-screen flag of the _new_ video mode instead of the
current video mode.

This bug caused spurious mode change failures when switching between
fullscreen and non-fullscreen modes using fbset, while ps3-video-mode worked
fine.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
CC: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ps3: Fix black and white stripes

Fix the black and white stripes issue with WUXGA monitor via HDMI.

It seems that when we use a VESA resolution from boot up, the AV settings
driver could not be initialized correctly.  In that case we need a dummy
packet before VESA setting.

[Geert] Refactored to reduce code duplication.

Signed-off-by: Geert Uytterhoeven <Geert.Uytterhoeven@sonycom.com>
CC: Geoff Levand <geoffrey.levand@am.sony.com>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: Support for byte-reversed framebuffer formats

Allow generic frame-buffer code to correctly write texts and blit images for
1, 2 and 4 bit per pixel frame-buffer organizations when pixels in bytes are
organized to in opposite order than bytes in long type.

Overhead should be reasonable.  If option is not selected, than compiler
should eliminate completely all overhead.

The feature is disabled at compile time if CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is
not set.

[adaplas]
Convert helper functions to macros if feature is not enabled.

Signed-off-by: Pavel Pisa <pisa@cmp.felk.cvut.cz>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nvidiafb: Add boot option to reverse i2c port assignment

There are a few nvidia hardware where the i2c port assignments are reversed,
i.e., the 1st i2c port is assigned to the secondary display and the 2nd i2c
port to the primary display.  In most cases, if only 1 display is attached, or
if only 1 flatpanel and 1 analog display is attached, the port reversal is of
no consequence.  However if 2 flatpanels are attached, it can cause display
problems.

There is no sane way of determining if the hardware reversed the i2c port
assignment, so the simplest fix is to add a boot/module option, "reverse_i2c
to explicitly reverse the i2c port.

This also restores i2c ordering back to the pre-2.6.22 state.

Signed-off-by: Antonino Daplas <adaplas@gail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fbdev: find mode with the highest/safest refresh rate in fb_find_mode()

Currently, if the refresh rate is not specified, fb_find_mode() returns the
first known video mode with the requested resolution, which provides no
guarantees wrt the refresh rate.  Change this so that the mode with the
highest refresh rate is returned when the driver provides a custom video mode
database and the monitor limits, and a mode with the safe 60 Hz refresh rate
otherwise.

Signed-off-by: Michal Januszewski <spock@gentoo.org>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Intel FB: support for interlaced video modes

Intel framebuffer now supports interlaced video modes.

Signed-off-by: Krzysztof Halasa <khc@pm.waw.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vfb: make virtual framebuffer mmapable

Changed things:

1. vmalloc()/vfree() replaced with rvmalloc()/rvfree() (taken from
   drivers/media/video/se401.c)

2. mmap method implemented (mostly taken from drivers/media/video/se401.c)

3. smem_start and smem_len fields of struct fb_fix_screeninfo initialized.
    (smem_start initialized with virtual address, don't know if it is really
   bad...)

[adaplas: sparse warning fix]
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pm2fb: panning and hardware cursor fixes

This patch:
- disallows setting of virtual height above 2048 as it does
  not work for accelerated copyarea and imageblit
- fixes blinking of pm2v cursor by pushing cursor outside
  the display (x=2047)
- fixes hardware cursor position on Permedia 2 chips with
  panning enabled
- enables hardware cursor by default

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pm2fb: hardware cursor support for the Permedia2

This patch adds hardware cursor support for the Permedia 2 chip.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pm3fb: header file cleanup

This patch fixes white spaces, redudant definitions and formating in the pm3fb
header file.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: code improvement 2nd part

This patch removes:
- redundant fields from the cirrusfb_regs structure
- one redundant header
- fixes two includes ("" to <>)

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cirrusfb: code improvements

This patch does some "short-range" code improvements like merging identical
switch clauses, replacing conditional branches with calculation of values,
merging only once-used functions into place they are called from.

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Antonino Daplas <adaplas@gmail.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>