openwrt/staging/blogic.git
9 years agoALSA: hda - Add headset mic pin quirk for a Dell device
David Henningsson [Wed, 22 Jul 2015 08:00:25 +0000 (10:00 +0200)]
ALSA: hda - Add headset mic pin quirk for a Dell device

Without this patch, the headset mic will not work on this machine.

BugLink: https://bugs.launchpad.net/bugs/1476987
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda - remove one pin from ALC292_STANDARD_PINS
Hui Wang [Wed, 22 Jul 2015 02:33:34 +0000 (10:33 +0800)]
ALSA: hda - remove one pin from ALC292_STANDARD_PINS

One more Dell laptop with alc293 codec needs
ALC293_FIXUP_DELL1_MIC_NO_PRESENCE, but the pin 0x1e does not match
the corresponding one in the ALC292_STANDARD_PINS. To use this macro
for this machine, we need to remove pin 0x1e from it.

BugLink: https://bugs.launchpad.net/bugs/1476888
Cc: <stable@vger.kernel.org>
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda - Add new GPU codec ID 0x10de007d to snd-hda
Aaron Plattner [Tue, 21 Jul 2015 00:14:14 +0000 (17:14 -0700)]
ALSA: hda - Add new GPU codec ID 0x10de007d to snd-hda

Vendor ID 0x10de007d is used by a yet-to-be-named GPU chip.

This chip also has the 2-ch audio swapping bug, so patch_nvhdmi is
appropriate here.

Signed-off-by: Aaron Plattner <aplattner@nvidia.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda: add new AMD PCI IDs with proper driver caps
Maruthi Srinivas Bayyavarapu [Mon, 20 Jul 2015 14:26:18 +0000 (19:56 +0530)]
ALSA: hda: add new AMD PCI IDs with proper driver caps

Fixes audio problems on newer asics

Signed-off-by: Maruthi Bayyavarapu <maruthi.bayyavarapu@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda - Fix Skylake codec timeout
David Henningsson [Thu, 16 Jul 2015 08:39:24 +0000 (10:39 +0200)]
ALSA: hda - Fix Skylake codec timeout

When the controller is powered up but the HDMI codec is powered down
on Skylake, the power well is turned off. When the codec is then
powered up again, we need to poke the codec a little extra to make
sure it wakes up. Otherwise we'll get sad "no response from codec"
messages and broken audio.

This also changes azx_runtime_resume to actually call
snd_hdac_set_codec_wakeup for Skylake (before STATETS read).
(Otherwise it would only have been called for Haswell and Broadwell,
which both do not need it, so this probably was not the author's
intention.)

Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Reviewed-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda - Add headset mic support for Acer Aspire V5-573G
Mateusz Sylwestrzak [Sun, 19 Jul 2015 15:38:56 +0000 (17:38 +0200)]
ALSA: hda - Add headset mic support for Acer Aspire V5-573G

Acer Aspire V5 with the ALC282 codec is given the wrong value for the
0x19 PIN by the laptop's BIOS. Overriding it with the correct value
adds support for the headset microphone which would not otherwise be
visible in the system.

The fix is based on commit 7819717b1134 with a similar quirk for Acer
Aspire with the ALC269 codec.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96201
Cc: <stable@vger.kernel.org>
Signed-off-by: Mateusz Sylwestrzak <matisec7@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: sparc: Add missing kfree in error path
Christophe JAILLET [Fri, 17 Jul 2015 18:33:21 +0000 (20:33 +0200)]
ALSA: sparc: Add missing kfree in error path

If 'of_ioremap' fails, then 'amd' should be freed, otherwise, there is a
memory leak.

Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: pcm: Fix lockdep warning with nonatomic PCM ops
Takashi Iwai [Fri, 17 Jul 2015 13:22:33 +0000 (15:22 +0200)]
ALSA: pcm: Fix lockdep warning with nonatomic PCM ops

With the nonatomic PCM ops, the system may spew lockdep warnings like:

 =============================================
 [ INFO: possible recursive locking detected ]
 4.2.0-rc1-jeejaval3 #12 Not tainted
 ---------------------------------------------
 aplay/4029 is trying to acquire lock:
  (snd_pcm_link_rwsem){.+.+.+}, at: [<ffffffff816fd473>] snd_pcm_stream_lock+0x43/0x60

 but task is already holding lock:
  (snd_pcm_link_rwsem){.+.+.+}, at: [<ffffffff816fcf29>] snd_pcm_action_nonatomic+0x29/0x80

 other info that might help us debug this:
  Possible unsafe locking scenario:

        CPU0
        ----
   lock(snd_pcm_link_rwsem);
   lock(snd_pcm_link_rwsem);

Although this is false-positive as the rwsem is taken always as
read-only for these code paths, it's certainly annoying to see this at
any occasion.  A simple fix is to use down_read_nested() in
snd_pcm_stream_lock() that can be called inside another lock.

Reported-by: Vinod Koul <vinod.koul@intel.com>
Reported-by: Jeeja Kp <jeeja.kp@intel.com>
Tested-by: Jeeja Kp <jeeja.kp@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda/realtek: Enable HP amp and mute LED on HP Folio 9480m [v3]
Keith Packard [Wed, 15 Jul 2015 19:14:39 +0000 (12:14 -0700)]
ALSA: hda/realtek: Enable HP amp and mute LED on HP Folio 9480m [v3]

This laptop needs GPIO4 pulled high to enable the headphone amplifier,
and has a mute LED on GPIO3. I modelled the patch on the existing
GPIO4 code which pulls the line low for the same purpose; this time,
the HP amp line is pulled high.

v2: Disable the headphone amplifier when no headphone is connected.
    Don't disable power savings to preserve the LED state.

v3: Remove headset-specific hooks and code; this is just a headphone.

Signed-off-by: Keith Packard <keithp@keithp.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: line6: Fix -EBUSY error during active monitoring
Takashi Iwai [Tue, 14 Jul 2015 13:19:37 +0000 (15:19 +0200)]
ALSA: line6: Fix -EBUSY error during active monitoring

When a monitor stream is active, the next PCM stream access results in
EBUSY error because of the check in line6_stream_start().  Fix this by
just skipping the submission of pending URBs when the stream is
already running instead.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=101431
Cc: <stable@vger.kernel.org> # v4.0+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda - Fix a wrong busy check in alt PCM open
Takashi Iwai [Wed, 8 Jul 2015 07:22:10 +0000 (09:22 +0200)]
ALSA: hda - Fix a wrong busy check in alt PCM open

Currently, the alt PCM open callback returns -EBUSY when an
independent HP is turned off, supposing that it conflicts with the
main PCM.  However, obviously, this check is wrong when the
independent HP itself isn't enabled but the alt PCM was explicitly
created via alc_dac_nid by a codec driver.

Reported-and-tested-by: Kailang Yang <kailang@realtek.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda - add codec ID for Broxton display audio codec
Libin Yang [Mon, 6 Jul 2015 02:44:26 +0000 (10:44 +0800)]
ALSA: hda - add codec ID for Broxton display audio codec

This patch adds codec ID (0x8086280a) and module alias for Broxton
display codec.

Signed-off-by: Libin Yang <libin.yang@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: usb-audio: Add MIDI support for Steinberg MI2/MI4
Dominic Sacré [Tue, 30 Jun 2015 15:41:33 +0000 (17:41 +0200)]
ALSA: usb-audio: Add MIDI support for Steinberg MI2/MI4

The Steinberg MI2 and MI4 interfaces are compatible with the USB class
audio spec, but the MIDI part of the devices is reported as a vendor
specific interface.

This patch adds entries to quirks-table.h to recognize the MIDI
endpoints. Audio functionality was already working and is unaffected by
this change.

Signed-off-by: Dominic Sacré <dominic.sacre@gmx.de>
Signed-off-by: Albert Huitsing <albert@huitsing.nl>
Acked-by: Clemens Ladisch <clemens@ladisch.de>
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: Fix uninintialized error return
Colin Ian King [Mon, 29 Jun 2015 16:10:22 +0000 (17:10 +0100)]
ALSA: Fix uninintialized error return

Static analysis with cppcheck found the following error:
  [sound/core/init.c:118]: (error) Uninitialized variable: err

..this was introduced by commit 2471b6c80a70e80de69f5ff4c37187c3912e5874
("ALSA: info: Register proc entries recursively, too") where the call
to snd_info_card_register was removed and no longer setting the error
return in err.  When snd_info_create_card_entry fails to allocate a
an entry, the error path exits with garbage in err.  Fix is to return
-ENOMEM if entry fails to be allocated.

Fixes: 2471b6c80a ("ALSA: info: Register proc entries recursively, too")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda: Delete an unnecessary check before the function call "snd_info_free_entry"
Markus Elfring [Sun, 28 Jun 2015 09:15:28 +0000 (11:15 +0200)]
ALSA: hda: Delete an unnecessary check before the function call "snd_info_free_entry"

The snd_info_free_entry() function tests whether its argument is NULL and
then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.

Signed-off-by: Markus Elfring <elfring@users.sourceforge.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda - Add a fixup for Dell E7450
Takashi Iwai [Mon, 29 Jun 2015 08:56:53 +0000 (10:56 +0200)]
ALSA: hda - Add a fixup for Dell E7450

Dell E7450 [0128:062e] needs the same quirk as other E7xx models.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=100571
Cc: <stable@vger.kernel.org> # v4.1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda - Fix the dock headphone output on Fujitsu Lifebook E780
Takashi Iwai [Mon, 29 Jun 2015 06:38:02 +0000 (08:38 +0200)]
ALSA: hda - Fix the dock headphone output on Fujitsu Lifebook E780

Fujitsu Lifebook E780 sets the sequence number 0x0f to only only of
the two headphones, thus the driver tries to assign another as the
line-out, and this results in the inconsistent mapping between the
created jack ctl and the actual I/O.  Due to this, PulseAudio doesn't
handle it properly and gets the silent output.

The fix is to ignore the non-HP sequencer checks.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=99681
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda - Add headset support to Acer Aspire V5
Takashi Iwai [Sat, 27 Jun 2015 08:21:13 +0000 (10:21 +0200)]
ALSA: hda - Add headset support to Acer Aspire V5

Acer Aspire V5 with ALC282 codec needs the similar quirk like Dell
laptops to support the headset mic.  The headset mic pin is 0x19 and
it's not exposed by BIOS, thus we need to fix the pincfg as well.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=96201
Cc: <stable@vger.kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda - restore the MIC FIXUP for some Dell machines
Hui Wang [Fri, 26 Jun 2015 04:35:17 +0000 (12:35 +0800)]
ALSA: hda - restore the MIC FIXUP for some Dell machines

Those FIXUPs were applied to the machines through pin quirks, but
recently the PCI_QUIRK makes them can't apply to the machines.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=99851
Signed-off-by: Hui Wang <hui.wang@canonical.com>
Cc: <stable@vger.kernel.org> # v4.1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: jack: Fix endless loop at unique index detection
Takashi Iwai [Fri, 26 Jun 2015 04:59:57 +0000 (06:59 +0200)]
ALSA: jack: Fix endless loop at unique index detection

While the commit [d0a601c278de: ALSA: jack: Fix the id uniqueness
check] fixes the wrong string check, it leads to a worse result -- the
loop in get_available_index() goes into an endless loop.  The cause is
that snd_ctl_find_id() returns the object assigned to the numid if
it's set.  Thus it points to the previous entry again.

This patch clears the numid field for the next call properly.

Reported-and-tested-by: Tomáš Pružina <pruzinat@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda - set proper caps for newer AMD hda audio in KB/KV
Alex Deucher [Wed, 24 Jun 2015 18:37:18 +0000 (14:37 -0400)]
ALSA: hda - set proper caps for newer AMD hda audio in KB/KV

Fixes audio problems on newer asics.

Noticed by: Kelly Anderson <kelly@xilka.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda - Disable widget power-save for VIA codecs
Takashi Iwai [Thu, 25 Jun 2015 06:48:54 +0000 (08:48 +0200)]
ALSA: hda - Disable widget power-save for VIA codecs

The widget power-save that was enabled in 4.1 kernel seems resulting
in the silent output on VIA codecs by some reason.  Some widgets get
wrong power states.

As a quick fix, turn this flag off while keeping power_down_unused
flag.  This will bring back to the state of 4.0.x.

Fixes: 688b12cc3ca8 ('ALSA: hda - Use the new power control for VIA codecs')
Reported-and-tested-by: Harald Dunkel <harri@afaics.de>
Cc: <stable@vger.kernel.org> # v4.1
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda - Fix Dock Headphone on Thinkpad X250 seen as a Line Out
David Henningsson [Wed, 24 Jun 2015 08:46:33 +0000 (10:46 +0200)]
ALSA: hda - Fix Dock Headphone on Thinkpad X250 seen as a Line Out

Thinkpad X250, when attached to a dock, has two headphone outs but
no line out. Make sure we don't try to turn this into one headphone
and one line out (since that disables the headphone amp on the dock).

Alsa-info at http://www.alsa-project.org/db/?f=36f8764e1d782397928feec715d0ef90dfddd4c1

Cc: stable@vger.kernel.org
Signed-off-by: David Henningsson <david.henningsson@canonical.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: pcm: Fix pcm_class sysfs output
Takashi Iwai [Tue, 23 Jun 2015 09:56:22 +0000 (11:56 +0200)]
ALSA: pcm: Fix pcm_class sysfs output

The pcm_class sysfs of each PCM substream gives only "none" since the
recent code change to embed the struct device.  Fix the code to point
directly to the embedded device object properly.

Fixes: ef46c7af93f9 ('ALSA: pcm: Embed struct device')
Cc: <stable@vger.kernel.org> # v4.0+
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoMerge tag 'asoc-v4.2-3' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Takashi Iwai [Mon, 22 Jun 2015 11:25:34 +0000 (13:25 +0200)]
Merge tag 'asoc-v4.2-3' of git://git./linux/kernel/git/broonie/sound into for-next

ASoC: A couple more updates for v4.2

These were sitting on my laptop.

9 years agoMerge remote-tracking branch 'asoc/topic/rcar' into asoc-next
Mark Brown [Mon, 22 Jun 2015 10:19:46 +0000 (11:19 +0100)]
Merge remote-tracking branch 'asoc/topic/rcar' into asoc-next

9 years agoMerge remote-tracking branch 'asoc/topic/arizona' into asoc-next
Mark Brown [Mon, 22 Jun 2015 10:19:45 +0000 (11:19 +0100)]
Merge remote-tracking branch 'asoc/topic/arizona' into asoc-next

9 years agoMerge tag 'asoc-v4.2-2' into asoc-next
Mark Brown [Mon, 22 Jun 2015 10:19:39 +0000 (11:19 +0100)]
Merge tag 'asoc-v4.2-2' into asoc-next

ASoC: Further updates for v4.2

There's a bunch of additional updates and fixes that came in since my
orignal pull request here, including DT support for rt5645 and fairly
large serieses of cleanups and improvements to tas2552 and rcar.

# gpg: Signature made Mon 22 Jun 2015 10:24:48 BST using RSA key ID 5D5487D0
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

9 years agoMerge tag 'asoc-v4.2' into asoc-next
Mark Brown [Mon, 22 Jun 2015 10:19:31 +0000 (11:19 +0100)]
Merge tag 'asoc-v4.2' into asoc-next

ASoC: Updates for v4.2

The big thing this release has been Liam's addition of topology support
to the core.  We've also seen quite a bit of driver work and the
continuation of Lars' refactoring for component support.

 - Support for loading ASoC topology maps from firmware, intended to be
   used to allow self-describing DSP firmware images to be built which
   can map controls added by the DSP to userspace without the kernel
   needing to know about individual DSP firmwares.
 - Lots of refactoring to avoid direct access to snd_soc_codec where
   it's not needed supporting future refactoring.
 - Big refactoring and cleanup serieses for the Wolfson ADSP and TI
   TAS2552 drivers.
 - Support for TI TAS571x power amplifiers.
 - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs.
 - Support for x86 systems with RT5650 and Qualcomm Storm.

# gpg: Signature made Mon 08 Jun 2015 18:48:37 BST using RSA key ID 5D5487D0
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

9 years agoMerge remote-tracking branches 'asoc/fix/wm8737', 'asoc/fix/wm8903', 'asoc/fix/wm8955...
Mark Brown [Mon, 22 Jun 2015 10:19:29 +0000 (11:19 +0100)]
Merge remote-tracking branches 'asoc/fix/wm8737', 'asoc/fix/wm8903', 'asoc/fix/wm8955' and 'asoc/fix/wm8960' into asoc-linus

9 years agoMerge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fmtbit', 'asoc/fix/intel...
Mark Brown [Mon, 22 Jun 2015 10:19:27 +0000 (11:19 +0100)]
Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fmtbit', 'asoc/fix/intel', 'asoc/fix/max98925', 'asoc/fix/rcar' and 'asoc/fix/ux500' into asoc-linus

9 years agoMerge remote-tracking branch 'asoc/fix/rt5645' into asoc-linus
Mark Brown [Mon, 22 Jun 2015 10:19:27 +0000 (11:19 +0100)]
Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linus

9 years agoMerge tag 'asoc-v4.2-2' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie...
Takashi Iwai [Mon, 22 Jun 2015 09:32:41 +0000 (11:32 +0200)]
Merge tag 'asoc-v4.2-2' of git://git./linux/kernel/git/broonie/sound into for-next

ASoC: Further updates for v4.2

There's a bunch of additional updates and fixes that came in since my
orignal pull request here, including DT support for rt5645 and fairly
large serieses of cleanups and improvements to tas2552 and rcar.

9 years agoMerge remote-tracking branch 'asoc/topic/wm8995' into asoc-next
Mark Brown [Mon, 22 Jun 2015 09:24:37 +0000 (10:24 +0100)]
Merge remote-tracking branch 'asoc/topic/wm8995' into asoc-next

9 years agoMerge remote-tracking branches 'asoc/topic/wm8523' and 'asoc/topic/wm8741' into asoc...
Mark Brown [Mon, 22 Jun 2015 09:24:36 +0000 (10:24 +0100)]
Merge remote-tracking branches 'asoc/topic/wm8523' and 'asoc/topic/wm8741' into asoc-next

9 years agoMerge remote-tracking branch 'asoc/topic/tas2552' into asoc-next
Mark Brown [Mon, 22 Jun 2015 09:24:35 +0000 (10:24 +0100)]
Merge remote-tracking branch 'asoc/topic/tas2552' into asoc-next

9 years agoMerge remote-tracking branch 'asoc/topic/simple' into asoc-next
Mark Brown [Mon, 22 Jun 2015 09:24:35 +0000 (10:24 +0100)]
Merge remote-tracking branch 'asoc/topic/simple' into asoc-next

9 years agoMerge remote-tracking branches 'asoc/topic/qcom', 'asoc/topic/rcar', 'asoc/topic...
Mark Brown [Mon, 22 Jun 2015 09:24:33 +0000 (10:24 +0100)]
Merge remote-tracking branches 'asoc/topic/qcom', 'asoc/topic/rcar', 'asoc/topic/rt286' and 'asoc/topic/rt5640' into asoc-next

9 years agoMerge remote-tracking branches 'asoc/topic/mediatek', 'asoc/topic/ml26124' and 'asoc...
Mark Brown [Mon, 22 Jun 2015 09:24:31 +0000 (10:24 +0100)]
Merge remote-tracking branches 'asoc/topic/mediatek', 'asoc/topic/ml26124' and 'asoc/topic/omap' into asoc-next

9 years agoMerge remote-tracking branches 'asoc/topic/intel' and 'asoc/topic/max98090' into...
Mark Brown [Mon, 22 Jun 2015 09:24:30 +0000 (10:24 +0100)]
Merge remote-tracking branches 'asoc/topic/intel' and 'asoc/topic/max98090' into asoc-next

9 years agoMerge remote-tracking branch 'asoc/topic/fsl' into asoc-next
Mark Brown [Mon, 22 Jun 2015 09:24:30 +0000 (10:24 +0100)]
Merge remote-tracking branch 'asoc/topic/fsl' into asoc-next

9 years agoMerge remote-tracking branch 'asoc/topic/davinci' into asoc-next
Mark Brown [Mon, 22 Jun 2015 09:24:30 +0000 (10:24 +0100)]
Merge remote-tracking branch 'asoc/topic/davinci' into asoc-next

9 years agoMerge remote-tracking branches 'asoc/topic/adsp' and 'asoc/topic/atmel' into asoc...
Mark Brown [Mon, 22 Jun 2015 09:24:28 +0000 (10:24 +0100)]
Merge remote-tracking branches 'asoc/topic/adsp' and 'asoc/topic/atmel' into asoc-next

9 years agoMerge remote-tracking branch 'asoc/topic/rt5670' into asoc-next
Mark Brown [Mon, 22 Jun 2015 09:24:28 +0000 (10:24 +0100)]
Merge remote-tracking branch 'asoc/topic/rt5670' into asoc-next

9 years agoMerge remote-tracking branch 'asoc/topic/rt5645' into asoc-next
Mark Brown [Mon, 22 Jun 2015 09:24:27 +0000 (10:24 +0100)]
Merge remote-tracking branch 'asoc/topic/rt5645' into asoc-next

9 years agoMerge tag 'asoc-v4.2' into asoc-next
Mark Brown [Mon, 22 Jun 2015 09:24:19 +0000 (10:24 +0100)]
Merge tag 'asoc-v4.2' into asoc-next

ASoC: Updates for v4.2

The big thing this release has been Liam's addition of topology support
to the core.  We've also seen quite a bit of driver work and the
continuation of Lars' refactoring for component support.

 - Support for loading ASoC topology maps from firmware, intended to be
   used to allow self-describing DSP firmware images to be built which
   can map controls added by the DSP to userspace without the kernel
   needing to know about individual DSP firmwares.
 - Lots of refactoring to avoid direct access to snd_soc_codec where
   it's not needed supporting future refactoring.
 - Big refactoring and cleanup serieses for the Wolfson ADSP and TI
   TAS2552 drivers.
 - Support for TI TAS571x power amplifiers.
 - Support for Qualcomm APQ8016 and ZTE ZX296702 SoCs.
 - Support for x86 systems with RT5650 and Qualcomm Storm.

# gpg: Signature made Mon 08 Jun 2015 18:48:37 BST using RSA key ID 5D5487D0
# gpg: Oops: keyid_from_fingerprint: no pubkey
# gpg: Good signature from "Mark Brown <broonie@sirena.org.uk>"
# gpg:                 aka "Mark Brown <broonie@debian.org>"
# gpg:                 aka "Mark Brown <broonie@kernel.org>"
# gpg:                 aka "Mark Brown <broonie@tardis.ed.ac.uk>"
# gpg:                 aka "Mark Brown <broonie@linaro.org>"
# gpg:                 aka "Mark Brown <Mark.Brown@linaro.org>"

9 years agoMerge remote-tracking branches 'asoc/fix/wm8737', 'asoc/fix/wm8903', 'asoc/fix/wm8955...
Mark Brown [Mon, 22 Jun 2015 09:24:17 +0000 (10:24 +0100)]
Merge remote-tracking branches 'asoc/fix/wm8737', 'asoc/fix/wm8903', 'asoc/fix/wm8955' and 'asoc/fix/wm8960' into asoc-linus

9 years agoMerge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fmtbit', 'asoc/fix/intel...
Mark Brown [Mon, 22 Jun 2015 09:24:15 +0000 (10:24 +0100)]
Merge remote-tracking branches 'asoc/fix/arizona', 'asoc/fix/fmtbit', 'asoc/fix/intel', 'asoc/fix/max98925', 'asoc/fix/rcar' and 'asoc/fix/ux500' into asoc-linus

9 years agoMerge remote-tracking branch 'asoc/fix/rt5645' into asoc-linus
Mark Brown [Mon, 22 Jun 2015 09:24:15 +0000 (10:24 +0100)]
Merge remote-tracking branch 'asoc/fix/rt5645' into asoc-linus

9 years agoALSA: hda-beep: Update authors dead email address
Matt Ranostay [Sat, 20 Jun 2015 06:46:16 +0000 (23:46 -0700)]
ALSA: hda-beep: Update authors dead email address

Signed-off-by: Matt Ranostay <mranostay@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoASoC: wm_adsp: Move DSP Rate controls into the codec
Richard Fitzgerald [Thu, 18 Jun 2015 12:43:19 +0000 (13:43 +0100)]
ASoC: wm_adsp: Move DSP Rate controls into the codec

The rate controls are codec-specific, it's not possible to
generically say what the range or the meaning of each control
is (or even if they exist at all) - that depends on the
particular codec.

This is currently being handled for Arizona codecs by putting
an Arizona-specific table of controls inside the wm_adsp driver.
This creates a dependency between wm_adsp and arizona.c, and is an
awkward solution if the ADSP is used in another family of codecs

Fix this by moving the Arizona-specific rate controls into the
Arizona codec drivers.

Signed-off-by: Richard Fitzgerald <rf@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoMerge branches 'topic/adsp' and 'topic/dapm' of git://git.kernel.org/pub/scm/linux...
Mark Brown [Fri, 19 Jun 2015 10:17:19 +0000 (11:17 +0100)]
Merge branches 'topic/adsp' and 'topic/dapm' of git://git./linux/kernel/git/broonie/sound into asoc-arizona

9 years agoASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 case
Axel Lin [Tue, 16 Jun 2015 11:39:09 +0000 (19:39 +0800)]
ASoC: wm8995: Fix setting sysclk for WM8995_SYSCLK_MCLK2 case

Fix trivial typo.

Signed-off-by: Axel Lin <axel.lin@ingics.com>
Acked-by: Charles Keepax <ckeepax@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoALSA: hda: provide default bus io ops extended hdac
Vinod Koul [Wed, 17 Jun 2015 05:50:18 +0000 (11:20 +0530)]
ALSA: hda: provide default bus io ops extended hdac

A typical io ops use simple io accessors which can be common for most
drivers, so provide a default ops which will be used if driver doesn't
provide one

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda: add hda link cleanup routine
Vinod Koul [Wed, 17 Jun 2015 05:50:17 +0000 (11:20 +0530)]
ALSA: hda: add hda link cleanup routine

In HDA extended bus the HDA link objects are created when multilink
capabilities are parsed. We need a routine which free up these link objects
for a bus. So add snd_hdac_link_free_all routine

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda: add hdac_ext stream creation and cleanup routines
Vinod Koul [Wed, 17 Jun 2015 05:50:16 +0000 (11:20 +0530)]
ALSA: hda: add hdac_ext stream creation and cleanup routines

HDAC extended core should create streams for an extended bus and also free
up those on cleanup. So introduce snd_hdac_ext_stream_init_all and
snd_hdac_stream_free_all routines

Signed-off-by: Jeeja KP <jeeja.kp@intel.com>
Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoASoC: rsrc-card: remove unused ret
Kuninori Morimoto [Wed, 17 Jun 2015 00:36:48 +0000 (00:36 +0000)]
ASoC: rsrc-card: remove unused ret

'047000278da3a17f8("ASoC: rsrc-card: cleanup for DPCM")'
cleanuped rsrc-card driver, but then, unused ret was left.
Below warning happen without this patch

${LINUX}/sound/soc/sh/rcar/rsrc-card.c: In function 'rsrc_card_startup':
${LINUX}/sound/soc/sh/rcar/rsrc-card.c:78:6: warning: unused variable \
'ret' [-Wunused-variable]

Reported-by: kbuild test robot <fengguang.wu@intel.com>
Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoALSA: HDAC: move SND_HDA_PREALLOC_SIZE to core
Vinod Koul [Tue, 16 Jun 2015 15:30:22 +0000 (21:00 +0530)]
ALSA: HDAC: move SND_HDA_PREALLOC_SIZE to core

Since this is common option for HDA driver to specfiy pre-allocated
buffer, we should make this option availble to all HDA driver by
moving this to HDA core

Signed-off-by: Vinod Koul <vinod.koul@intel.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoASoC: mediatek: Add machine driver for rt5650 rt5676 codec
Koro Chen [Mon, 15 Jun 2015 14:38:04 +0000 (22:38 +0800)]
ASoC: mediatek: Add machine driver for rt5650 rt5676 codec

This is the DPCM based machine driver with rt5650 and rt5676

Signed-off-by: Nicolas Boichat <drinkcat@chromium.org>
Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: mediatek: Add machine driver for MAX98090 codec
Koro Chen [Mon, 15 Jun 2015 14:38:03 +0000 (22:38 +0800)]
ASoC: mediatek: Add machine driver for MAX98090 codec

This is the DPCM based machine driver with MAX98090

Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: mediatek: Add AFE platform driver
Koro Chen [Mon, 15 Jun 2015 14:38:02 +0000 (22:38 +0800)]
ASoC: mediatek: Add AFE platform driver

This is the DPCM based platform driver of AFE (Audio Front End) unit.

Signed-off-by: Sascha Hauer <s.hauer@pengutronix.de>
Signed-off-by: Koro Chen <koro.chen@mediatek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsnd: remove io from rsnd_mod
Kuninori Morimoto [Mon, 15 Jun 2015 06:28:03 +0000 (06:28 +0000)]
ASoC: rsnd: remove io from rsnd_mod

Each Renesas sound mod (= SSI/SRC/DVC) might be called from many path
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. rsnd_mod_to_io() is no longer needed. Let's remove it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsnd: move rsnd_mod_is_working() to rsnd_io_is_working()
Kuninori Morimoto [Mon, 15 Jun 2015 06:27:47 +0000 (06:27 +0000)]
ASoC: rsnd: move rsnd_mod_is_working() to rsnd_io_is_working()

Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship.
This patch checks module working status via io instead of mod

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsnd: don't use rsnd_mod_to_io() on snd_kcontrol
Kuninori Morimoto [Mon, 15 Jun 2015 06:27:28 +0000 (06:27 +0000)]
ASoC: rsnd: don't use rsnd_mod_to_io() on snd_kcontrol

Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. This patch removes rsnd_mod_to_io() from snd_kcontrol
and related function.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_src_xxx()
Kuninori Morimoto [Mon, 15 Jun 2015 06:27:13 +0000 (06:27 +0000)]
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_src_xxx()

Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. This patch removes rsnd_mod_to_io() from rsnd_src_xxx()
and related function.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_ssi_xxx()
Kuninori Morimoto [Mon, 15 Jun 2015 06:26:56 +0000 (06:26 +0000)]
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_ssi_xxx()

Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. This patch removes rsnd_mod_to_io() from rsnd_ssi_xxx()
and related function.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_dma_xxx()
Kuninori Morimoto [Mon, 15 Jun 2015 06:26:25 +0000 (06:26 +0000)]
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_dma_xxx()

Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. This patch removes rsnd_mod_to_io() from rsnd_dma_xxx()
and related function

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_get_adinr()
Kuninori Morimoto [Mon, 15 Jun 2015 06:26:08 +0000 (06:26 +0000)]
ASoC: rsnd: don't use rsnd_mod_to_io() on rsnd_get_adinr()

Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. This patch removes rsnd_mod_to_io() from rsnd_get_adinr()
and its related function

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsnd: add common interrupt handler for SSI/SRC/DMA
Kuninori Morimoto [Mon, 15 Jun 2015 06:25:48 +0000 (06:25 +0000)]
ASoC: rsnd: add common interrupt handler for SSI/SRC/DMA

Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. Then, interrupt handler can't use rsnd_mod_to_io().
This patch adds SSI/SRC/DMA common interrupt handler frame

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsnd: adds struct rsnd_dai_stream as on each fuction as parameter
Kuninori Morimoto [Mon, 15 Jun 2015 06:25:20 +0000 (06:25 +0000)]
ASoC: rsnd: adds struct rsnd_dai_stream as on each fuction as parameter

Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. This means we can't call rsnd_mod_to_io() any more.
This patch adds struct rsnd_dai_stream to each function as parameter.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsnd: rsnd_mod has rsnd_priv
Kuninori Morimoto [Mon, 15 Jun 2015 06:24:54 +0000 (06:24 +0000)]
ASoC: rsnd: rsnd_mod has rsnd_priv

Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. In such case, mod <-> io is no longer 1:1
relationship. This means we can't use rsnd_mod_to_io() in SSI/SRC/DMA
interrupt handler. In such case, we need to check all io in interrupt
handler, and then, "priv" is needed.
This patch adds rsnd_priv pointer in rsnd_mod for prepare it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsnd: count each mod (SSI/SRC/DVC)
Kuninori Morimoto [Mon, 15 Jun 2015 06:24:34 +0000 (06:24 +0000)]
ASoC: rsnd: count each mod (SSI/SRC/DVC)

Each Renesas sound mod (= SSI/SRC/DVC) might be called from many paths
if it supports MIXer. Then, we don't need to re-call each mod function
that had been called. This patch count each mod status.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsrc-card: cleanup for DPCM
Kuninori Morimoto [Mon, 15 Jun 2015 06:24:15 +0000 (06:24 +0000)]
ASoC: rsrc-card: cleanup for DPCM

rsrc-card driver is based on simple-card driver which is caring about
CPU / Codec connection. OTOH, rsrc-card is used for DPCM system.
FE portion is constituted by CPU and dummy Codec, and BE is constituted
by dummy CPU and Codec in DPCM system.
Because of this, current rsrc-card is doing pointless method. It works well
if FE/BE was 1:1, but not good for multi FE/BE.
This patch cleanups rsrc-card driver for DPCM. and this is prepare for
MIX support for Renesas sound driver.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsrc-card: tidyup return value of clock error
Kuninori Morimoto [Mon, 15 Jun 2015 06:23:52 +0000 (06:23 +0000)]
ASoC: rsrc-card: tidyup return value of clock error

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsrc-card: move rsrc_card_parse_daifmt() to upper side
Kuninori Morimoto [Mon, 15 Jun 2015 06:23:30 +0000 (06:23 +0000)]
ASoC: rsrc-card: move rsrc_card_parse_daifmt() to upper side

This is prepare for DPCM cleanup

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsnd-card: tidyup rsrc_priv_to_()
Kuninori Morimoto [Mon, 15 Jun 2015 06:23:08 +0000 (06:23 +0000)]
ASoC: rsnd-card: tidyup rsrc_priv_to_()

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsrc-card: remove unused name
Kuninori Morimoto [Mon, 15 Jun 2015 06:22:47 +0000 (06:22 +0000)]
ASoC: rsrc-card: remove unused name

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsrc-card: enable multi cpu/codec for DPCM
Kuninori Morimoto [Mon, 15 Jun 2015 06:22:30 +0000 (06:22 +0000)]
ASoC: rsrc-card: enable multi cpu/codec for DPCM

Current rsrc-card is assuming 1 FE (= CPU), 1 BE (= codec) on card.
But, it will support multi FE/BE card. This is prepare for it.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsrc-card: tidyup priv->snd_card setup timing
Kuninori Morimoto [Mon, 15 Jun 2015 06:22:05 +0000 (06:22 +0000)]
ASoC: rsrc-card: tidyup priv->snd_card setup timing

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsrc-card: used "fe.xxx"/"be.xxx" name for dai_link
Kuninori Morimoto [Mon, 15 Jun 2015 06:21:34 +0000 (06:21 +0000)]
ASoC: rsrc-card: used "fe.xxx"/"be.xxx" name for dai_link

Current dai_link name is using "cpu_dai_name + codec_dai_name",
but one of them is always "snd-soc-dummy-dai" when DPCM.
This patch uses "fe.xxx" for cpu, "be.xxx" for codec.

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsnd: don't call snd_pcm_period_elapsed() under spin lock
Kuninori Morimoto [Mon, 15 Jun 2015 06:21:15 +0000 (06:21 +0000)]
ASoC: rsnd: don't call snd_pcm_period_elapsed() under spin lock

'a9e1ac1a9e4585b5("ASoC: rsnd: spin lock for interrupt handler")'
added spin lock under interrupt handler to solve HW restart issue.

OTOH, current rsnd driver calls snd_pcm_period_elapsed() from
rsnd_dai_pointer_update(). but, it will be called under spin lock
if SSI was PIO mode.

If it was called under spin lock, it will call
snd_pcm_update_state() -> snd_pcm_drain_done().
Then, it calls rsnd_soc_dai_trigger() and will be dead-lock.
This patch doesn't call rsnd_dai_pointer_update() under spin lock

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoASoC: rsnd: don't care under/over run error when PIO
Kuninori Morimoto [Mon, 15 Jun 2015 06:20:54 +0000 (06:20 +0000)]
ASoC: rsnd: don't care under/over run error when PIO

PIO is used only for checking data path / codec settings. And underrun
is very normal when PIO mode. Let's don't care about under/over run
error when PIO case. Otherwise, 1) too many HW restart happens, 2) some
sounds which need much data transfer can't play since it falls into
error detection method which was created for DMA transfer

Signed-off-by: Kuninori Morimoto <kuninori.morimoto.gx@renesas.com>
Tested-by: Keita Kobayashi <keita.kobayashi.ym@renesas.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoMerge branch 'for-linus' into for-next
Takashi Iwai [Tue, 16 Jun 2015 10:47:34 +0000 (12:47 +0200)]
Merge branch 'for-linus' into for-next

Yet another non-trivial conflicts for HDA legacy stuff.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: hda - Fix unused label skip_i915
Takashi Iwai [Tue, 16 Jun 2015 10:23:36 +0000 (12:23 +0200)]
ALSA: hda - Fix unused label skip_i915

When CONFIG_SND_HDA_I915=n, we get a compile warning:
  sound/pci/hda/hda_intel.c: In function ‘azx_probe_continue’:
  sound/pci/hda/hda_intel.c:1882:2: warning: label ‘skip_i915’ defined but not used [-Wunused-label]

Fix it by putting again ifdef to it.  Sigh.

Fixes: bf06848bdbe5 ('ALSA: hda - Continue probing even if i915 binding fails')
Reported-by: Borislav Petkov <bp@suse.de>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoASoC: rt5645: move RT5650 muxes to rt5650_specific_dapm_widgets
Michele Curti [Mon, 15 Jun 2015 02:44:11 +0000 (10:44 +0800)]
ASoC: rt5645: move RT5650 muxes to rt5650_specific_dapm_widgets

Developing a driver for an Asus X205TA laptop I get these dmesg
errors:

 rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 ADC1 Swap Mux has no paths
 rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 ADC2 Swap Mux has no paths
 rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 ADC3 Swap Mux has no paths
 rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 ADC Mux has no paths
 rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 DAC1 L Mux has no paths
 rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 DAC1 R Mux has no paths
 rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 DAC2 L Mux has no paths
 rt5645 i2c-10EC5648:00: ASoC: mux RT5650 IF1 DAC2 R Mux has no paths

so, move these muxes to the rt5650_specific_dapm_widgets[] list.

Signed-off-by: Michele Curti <michele.curti@gmail.com>
Signed-off-by: Oder Chiou <oder_chiou@realtek.com>
Signed-off-by: Mark Brown <broonie@kernel.org>
9 years agoALSA: hda - Fix noisy outputs on Dell XPS13 (2015 model)
Takashi Iwai [Mon, 15 Jun 2015 18:36:12 +0000 (20:36 +0200)]
ALSA: hda - Fix noisy outputs on Dell XPS13 (2015 model)

The new Dell XPS13 also requires the similar quirk for fixing the
noisy outputs.  (But, as the codec was changed, now the fixup for
Latitude is used instead.)

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=99851
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: bebob: add support for Behringer FCA 610/1616
Takashi Sakamoto [Sun, 14 Jun 2015 03:49:37 +0000 (12:49 +0900)]
ALSA: bebob: add support for Behringer FCA 610/1616

They're based on DM1500 (ArchWave produced), and BeBoB version 3 is
installed.

$ cat /proc/asound/FCA610/firewire/firmware
Manufacturer: bridgeCo
Protocol Ver: 3
Build Ver: 0
GUID: 0x001564000002AD73
Model ID: 0x03
Model Rev: 0
Firmware Date: 20121102
Firmware Time: 153431
Firmware ID: 0x610
Firmware Ver: 8348
Base Addr: 0x400C0080
Max Size: 1422624
Loader Date: 20121015
Loader Time: 104710

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: bebob: keep duplex streams always to keep internal multiplexer properly
Takashi Sakamoto [Sun, 14 Jun 2015 03:49:36 +0000 (12:49 +0900)]
ALSA: bebob: keep duplex streams always to keep internal multiplexer properly

Behringer FCA610 transmits packets with periodic noisy PCM samples
when receiving no streams, and generates a bit noisy sound.

ALSA BeBoB driver is programmed to establish both in/out connections
when starting streaming, then transfers packets as userspace applications
requested. This means that there's a case that one of incoming/outgoing
streams is running, to save CPU and bandwidth usage. Although, it's natural
to start transferring packets in both direction.

This commit makes this driver to keeps duplex streams always.

Tested-by: Kim Tore Jensen <kim@incendio.no>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: bebob: loosen up severity of checking continuity for BeBoB v3 quirk
Takashi Sakamoto [Sun, 14 Jun 2015 03:49:35 +0000 (12:49 +0900)]
ALSA: bebob: loosen up severity of checking continuity for BeBoB v3 quirk

PrismSound Orpheus, Behringer UFX1604 and FCA610 work with BeBoB v3, and
they're confirmed to transmit discontinuous packets in the beginning of
streaming.

payload    CIP headers
  8        0x00070000 0x9002FFFF
  8        0x00070000 0x9002FFFF
  8        0x00070000 0x9002FFFF
  8        0x00070008 0x9002FFFF <-
  8        0x00070008 0x9002FFFF
  8        0x00070008 0x9002FFFF
  8        0x00070008 0x9002FFFF
  8        0x00070008 0x9002FFFF
  8        0x00070008 0x9002FFFF
232        0x00070000 0x9002E798 <-
232        0x00070008 0x9002FB99
232        0x00070010 0x90021398
  8        0x00070018 0x9002FFFF
(This sample was got with Behringer FCA610 and FFADO library.)

This commit sets CIP_EMPTY_HAS_WRONG_DBC and CIP_SKIP_DBC_ZERO_CHECK to
ignore these discontinuities.

Tested-by: Kim Tore Jensen <kim@incendio.no>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: bebob: expand timeout for DM1500 quirk
Takashi Sakamoto [Sun, 14 Jun 2015 03:49:34 +0000 (12:49 +0900)]
ALSA: bebob: expand timeout for DM1500 quirk

Behringer FCA610 and UFX1604 is confirmed to require more time till
transmitting packets after establishing connections. This seems to
be a quirk of DM1500 ASIC which ArchWave produced.

For this quirk, this commit extends the time to wait up to 2 seconds.
As a result, in worst cases, below userspace functions require 2 seconds
to return.
 - snd_pcm_prepare()
 - snd_pcm_hw_params()
 - snd_pcm_recover()

Tested-by: Kim Tore Jensen <kim@incendio.no>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: bebob: add 'version' member for BeBoB protocol version
Takashi Sakamoto [Sun, 14 Jun 2015 03:49:33 +0000 (12:49 +0900)]
ALSA: bebob: add 'version' member for BeBoB protocol version

BeBoB installed devices have BeBoB register area. This area stores
basic information about its firmware. A register has its protocol
version.

This commit adds 'version' member and store the device's protocol
version to handle v3 quirks in following commits.

Tested-by: Kim Tore Jensen <kim@incendio.no>
Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: bebob: add SYT-Match support
Takashi Sakamoto [Sun, 14 Jun 2015 03:49:32 +0000 (12:49 +0900)]
ALSA: bebob: add SYT-Match support

In previous commits, this driver can detect the source of clock as mush
as possible. SYT-Match mode is also available.

This commit purge the restriction.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: bebob: obsolete string literal expression for clock source
Takashi Sakamoto [Sun, 14 Jun 2015 03:49:31 +0000 (12:49 +0900)]
ALSA: bebob: obsolete string literal expression for clock source

The old string literals were completely replaced by new normalized
representation.

This commit obsoletes it.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: bebob: use normalized representation for the type of clock source
Takashi Sakamoto [Sun, 14 Jun 2015 03:49:30 +0000 (12:49 +0900)]
ALSA: bebob: use normalized representation for the type of clock source

This commit changes function prototype and its processing. As a result,
function caller can execute additional processing according to detected
clock source.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: bebob: preparation for replacing string literals by normalized representation...
Takashi Sakamoto [Sun, 14 Jun 2015 03:49:29 +0000 (12:49 +0900)]
ALSA: bebob: preparation for replacing string literals by normalized representation for model-dependent structures

Previous commit adds a enumerator as a normalized representation of
clock source, while model-dependent structures still use string literals
for this purpose.

This commit is a preparation for replacement.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: bebob: apply new enumerator to normalize the type of clock source
Takashi Sakamoto [Sun, 14 Jun 2015 03:49:28 +0000 (12:49 +0900)]
ALSA: bebob: apply new enumerator to normalize the type of clock source

Previous commit allows this driver to detect several types of clock
source, while there's no normalized expression for it.

This commit adds a new enumerator for this purpose.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: bebob: improve signal mode detection for clock source
Takashi Sakamoto [Sun, 14 Jun 2015 03:49:27 +0000 (12:49 +0900)]
ALSA: bebob: improve signal mode detection for clock source

With BeBoB version 3, current ALSA BeBoB driver detects the type of
current clock signal source wrongly. This is due to a lack of proper
implementation to parse the information.

This commit renews the parser. As a result, this driver detects
SYT-Match clock signal, thus it can start streams with two modes;
SYT-Match mode and the others. SYT-Match mode will be supported in future
commits.

There's a constrain about detected internal/external clock source.
When detecting external clock source, this driver allows userspace
applications to use current sampling rate only. This is due to consider
abour synchronization to external clock sources such as S/PDIF, ADAT or
word-clock.

According to several information from some devices, I guesss that the
internal clock of most devices synchronize to IEEE 1394 cycle start
packet. In this case, by a usual way, it's detect as 'Sync type
of output Music Sub-Unit' connected to 'Sync type of PCR output Unit
(oPCR)', and this driver judges it as internal clock. Therefore,
userspace applications is allowed to request arbitrary supported sampling
rates.

On the other hand, several devices based on BeBoB version 3 have
additional internal clock. In this case, by a usual way, it's detect as
'Sync/Additional type of External input Unit'. Unfortunately, there's no
way to distinguish this sync type from the other external clock sources
such as word-clock. In this case, this driver handles it as external and
userspace applications is forced to use current sampling rate.

I note that when the source of clock is detected as 'Isochronous stream
type of input PCR[0]', it's under 'SYT-Match' mode. In this mode, the
synchronization clock is generated according to SYT-series in received
packets. In this case, this driver generates the series by myself. I
experienced this mode often make the device silent suddenly during
playbacking. This means that the mode is easy to lost synchronization.

Signed-off-by: Takashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoALSA: mips: let SND_SGI_O2 select SND_PCM
Nicholas Mc Guire [Sun, 14 Jun 2015 17:16:59 +0000 (19:16 +0200)]
ALSA: mips: let SND_SGI_O2 select SND_PCM

Fix the missing dependency on PCM stuff.

[Add the same fix for HAL2, too -- tiwai]

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoMerge branch 'for-linus' into for-next
Takashi Iwai [Mon, 15 Jun 2015 11:15:48 +0000 (13:15 +0200)]
Merge branch 'for-linus' into for-next

Conflicts:
sound/pci/hda/patch_realtek.c

Signed-off-by: Takashi Iwai <tiwai@suse.de>
9 years agoASoC: intel: Constify ACPI device ids
Mathias Krause [Sat, 13 Jun 2015 12:25:16 +0000 (14:25 +0200)]
ASoC: intel: Constify ACPI device ids

Constify the ACPI device ID array, it doesn't need to be writable at
runtime.

Signed-off-by: Mathias Krause <minipli@googlemail.com>
Signed-off-by: Mark Brown <broonie@kernel.org>