Merge tag 'drm-msm-fixes-2018-08-10' of git://people.freedesktop.org/~robclark/linux into drm-next

Some small msm fixes.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rob Clark <robdclark@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGuZE0VEpatrtxGZtUB6FaQYr6Gf07UVpMsD15ook+5_WQ@mail.gmail.com

drm/msm/disp/dpu: fix early dereference of physical encoder

This change validates the physical encoder before it
is dereferenced.

Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux into drm-next

More fixes for 4.19:
- Fixes for scheduler
- Fix for SR-IOV
- Fixes for display

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Alex Deucher <alexdeucher@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180809200052.2777-1-alexander.deucher@amd.com

Merge tag 'imx-drm-fixes-2018-08-03' of git://git.pengutronix.de/git/pza/linux into drm-next

drm/imx: ipu-v3 plane offset and IPU id fixes

- Fix U/V plane offsets for odd vertical offsets. Due to wrong operator
  order, the y offset was not rounded down properly for vertically
  chroma subsampled planar formats.
- Fix IPU id number for boards that don't have an OF alias for their
  single IPU in the device tree. This is necessary to support imx-media
  on i.MX51 and i.MX53 SoCs.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1533552680.4204.14.camel@pengutronix.de

Merge tag 'imx-drm-next-2018-08-03' of git://git.pengutronix.de/git/pza/linux into drm-next

drm/imx: use suspend/resume helpers, add ipu-v3 V4L2 XRGB32/XBGR32 support

- Convert imx_drm_suspend/resume to use the
  drm_mode_config_helper_suspend/ resume functions.
- Add support for V4L2_PIX_FMT_XRGB32/XBGR32, corresponding to
  DRM_FORMAT_XRGB8888/BGRX8888, respectively.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Philipp Zabel <p.zabel@pengutronix.de>
Link: https://patchwork.freedesktop.org/patch/msgid/1533552701.4204.15.camel@pengutronix.de

drm/amdgpu/sriov: give 8s for recover vram under RUNTIME

Extend the timeout for recovering vram bos from shadows on sr-iov
to cover the worst case scenario for timeslices and VFs

Under runtime, the wait fence time could be quite long when
other VFs are in exclusive mode. For example, for 4 VF, every
VF's exclusive timeout time is set to 3s, then the worst case is
9s. If the VF number is more than 4,then the worst case time will
be longer.
The 8s is the test data, with setting to 8s, it will pass the TDR
test for 1000 times.

SWDEV-161490

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Emily Deng <Emily.Deng@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/scheduler: fix param documentation

We no longer have sched parameter so remove its description
as well

Signed-off-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

Merge tag 'drm-intel-next-fixes-2018-08-06' of git://anongit.freedesktop.org/drm/drm-intel into drm-next

- Fix gvt compilation broken on a silent conflict on fixes vs next merge
- Fix runtime PM for LPE audio
- Revert on ICL workaround
- Interactive RPS mode
- Fix for PSR sink status report

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180806233034.GA20655@intel.com

Merge tag 'drm-misc-next-fixes-2018-08-02' of git://anongit.freedesktop.org/drm/drm-misc into drm-next

Fixes an oops on the DP CEC code and a memory leak on the vkms driver.

Signed-off-by: Dave Airlie <airlied@redhat.com>
From: Gustavo Padovan <gustavo@padovan.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20180802111728.GA27945@juma

Merge branch 'drm-next-4.19' of git://people.freedesktop.org/~agd5f/linux into drm-next

Fixes for 4.19:
- Fix UVD 7.2 instance handling
- Fix UVD 7.2 harvesting
- GPU scheduler fix for when a process is killed
- TTM cleanups
- amdgpu CS bo_list fixes
- Powerplay fixes for polaris12 and CZ/ST
- DC fixes for link training certain HMDs
- DC fix for vega10 blank screen in certain cases

From: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180801222906.1016-1-alexander.deucher@amd.com

Merge branch 'etnaviv/next' of https://git.pengutronix.de/git/lst/linux into drm-next

From: Lucas Stach <l.stach@pengutronix.de>
"not much to de-stage this time. Changes from Philipp and Souptick to
use memset32 more and switch the fault handler to the new vm_fault_t
and two small fixes for issues that can be hit in rare corner cases
from me."

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1533563808.2809.7.camel@pengutronix.de

Merge branch 'drm-tda998x-devel' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next

From: Russell King <rmk@armlinux.org.uk>
As per the patches posted, discussed and tested by Peter Rosin, this
converts TDA998x to a bridge driver, while still allowing Armada and
TI LCDC to continue using it as they always have done.  It also gets
rid of the private .fill_modes function, and tweaks the TMDS divider
calculation to be more correct to the available information.

[airlied: fixed two conflicts]
Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180802093421.GA29670@rmk-PC.armlinux.org.uk

Merge branch 'for-upstream/hdlcd' of git://linux-arm.org/linux-ld into drm-next

From: Liviu Dudau <Liviu.Dudau@arm.com>
"I managed to loose track of a few patches for HDLCD while focusing
on Mali DP and found them again when investigating an issue with
the way HDLCD behaves on teardown. They can go into drm-next for
one of the v4.19-rcX if you're not going to do another pull request
before the merge window."

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180731170831.GF17455@e110455-lin.cambridge.arm.com

drm/i2c: tda998x: correct PLL divider calculation

The serializer PLL divider is a power-of-two divider, so our calculation
which assumes that it's a numerical divider is incorrect.  Replace it
with one that results in a power-of-two divider value instead.

Tested with all supported modes with a Samsung S24C750.

Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

drm/i2c: tda998x: get rid of private fill_modes function

We can achieve the same effect via the get_modes() method, rather than
wrapping the fill_modes helper.

Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

drm/i2c: tda998x: move mode_valid() to bridge

Move the mode_valid() implementation to the bridge instead of the
connector, as we're checking the bridge's capabilities.

Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

drm/i2c: tda998x: register bridge outside of component helper

Register the bridge outside of the component helper as we have
drivers that wish to use the tda998x without its encoder.

Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

drm/i2c: tda998x: cleanup from previous changes

Cleanup the code a little from the effects of the previous changes:
- Move tda998x_destroy() to be above tda998x_create()
- Use 'dev' directly in tda998x_create() where appropriate.

Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

drm/i2c: tda998x: allocate tda998x_priv inside tda998x_create()

Move the tda998x_priv allocation inside tda998x_create() and simplify
the tda998x_create()'s arguments.  Pass the same to tda998x_destroy().

Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

drm/i2c: tda998x: convert to bridge driver

Convert tda998x to a bridge driver with built-in encoder support for
compatibility with existing component drivers.

Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

drm/scheduler: fix timeout worker setup for out of order job completions

drm_sched_job_finish() is a work item scheduled for each finished job on
a unbound system workqueue. This means the workers can execute out of order
with regard to the real hardware job completions.

If this happens queueing a timeout worker for the first job on the ring
mirror list is wrong, as this may be a job which has already finished
executing. Fix this by reorganizing the code to always queue the worker
for the next job on the list, if this job hasn't finished yet. This is
robust against a potential reordering of the finish workers.

Also move out the timeout worker cancelling, so that we don't need to
take the job list lock twice. As a small optimization list_del is used
to remove the job from the ring mirror list, as there is no need to
reinit the list head in the job we are about to free.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: display connected to dp-1 does not light up

[why]
for vega, dp set_panel_mode is
handled by psp firmware. dal should not program the
register again.

[how]
dal does not program panel mode.

Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: update clk for various HDMI color depths

[why]
When programming tonga's connector's backend we didn't take
in account that HDMI's colour depth might be more than 8bpc
therefore we need to add a switch statement that would adjust
the pixel clock accordingly.

[how]
Add a switch statement updating clock by its appropriate
coefficient.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Charlene Liu <Charlene.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: program display clock on cache match

[Why]
We seem to have an issue where high enough display clock
will not get set properly during S3 resume if we only
call vbios once

[How]
Expand condition of display clock programming to happen
even when cached display clock matches requested display
clock

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Tony Cheng <Tony.Cheng@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Add NULL check for enabling dp ss

[Why]

The pointer for integrated_info can be NULL which causes the system to
do a null pointer deference and hang on boot.

[How]

Add a check to ensure that integrated_info is not null before enabling
DP ss.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Sun peng Li <Sunpeng.Li@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add vbios table check for enabling dp ss

Signed-off-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Reviewed-by: Eric Bernstein <Eric.Bernstein@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Don't share clk source between DP and HDMI

[why]
Prevent clock source sharing between HDMI and DP connectors.
DP shouldn't be sharing its ref clock with phy clock,
which caused an issue of older ASICS booting up with multiple
diplays plugged in.

[how]
Add an extra check that would prevent HDMI and DP sharing clk.

Signed-off-by: Mikita Lipski <mikita.lipski@amd.com>
Reviewed-by: Hersen Wu <hersenxs.wu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/display: Fix DP HBR2 Eye Diagram Pattern on Carrizo

[why] dp hbr2 eye diagram pattern for raven asic is not stabled.
workaround is to use tp4 pattern. But this should not be
applied to asic before raven.

[how] add new bool varilable in asic caps. for raven asic,
use the workaround. for carrizo, vega, do not use workaround.

Signed-off-by: Hersen Wu <hersenxs.wu@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Leo Li <sunpeng.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use calculated disp_clk_khz value for dce110

[Why]

The calculated values for actual disp_clk_khz were ignored when
notifying pplib of the new display requirements. In order to honor DFS
bypass clocks from the hardware, the calculated value should be used.

[How]

The return value for set_dispclk is now assigned back into new_clocks
and correctly carried through into dccg->clks.phyclk_khz. When notifying
pplib of new display requirements dccg->clks.phyclk_khz is used
instead of dce.dispclk_khz. The value of dce.dispclk_khz was never
explicitly set to anything before.

A 15% higher display clock value than calculated is no longer requested
for dce110 since it now makes use of the calculated value.

Since dce112 makes use of dce110's set_bandwidth but not its
update_clocks it needs to have the value correctly carried through.

Signed-off-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Reviewed-by: Dmytro Laktyushkin <Dmytro.Laktyushkin@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Implement custom degamma lut on dcn

[Why]
Custom degamma lut functions are a feature we would
like to support on compatible hardware

[How]
In atomic check, convert from array of drm_color_lut to
dc_transfer_func.  On hardware commit, allow for possibility
of custom degamma.  Both are based on the equivalent
regamma pipeline.

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Krunoslav Kovac <Krunoslav.Kovac@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Destroy aux_engines only once

[Why]
In the dce112 function to destroy the resource pool, engines
(the aux engines) is destroyed twice.  This has no ill effects
but is a tad redundant.

[How]
Remove the redundant call

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Read back max backlight value at boot

[Why]
If there is no program explicitly setting the backlight
brightness (for example, during a minimal install of linux), the
hardware defaults to maximum brightness but the backlight_device
defaults to 0 value.  Thus, settings displays the wrong brightness
value.

[How]
When creating the backlight device, set brightness to max

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Implement backlight_ops.get_brightness

[Why]
This hook that is supposed to read the actual backlight value
is used in a few places throughout the kernel to setup or force
update on backlight

[How]
Create a dc function that calls the existing abm function, and
call that function from amdgpu

Signed-off-by: David Francis <David.Francis@amd.com>
Reviewed-by: Harry Wentland <Harry.Wentland@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: DP Compliance 400.1.1 failure

[Why]
400.1.1 is failing because we are not performing link training when
we get an HPD pulse for the same display. This is breaking DP
compliance

[How]
Always perform link training after HPD pulse if the detection
reason is not  DETECT_REASON_HPDRX.

Signed-off-by: abdoulaye berthe <abdoulaye.berthe@amd.com>
Reviewed-by: Wenjing Liu <Wenjing.Liu@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Use requested HDMI aspect ratio

[Why]
The DRM mode's HDMI picture aspect ratio field was never saved in
dc_stream's timing struct. This causes us to mistake a new stream to
have the same timings as the old, even though the user has requested a
different aspect ratio.

[How]
Save DRM's aspect ratio field within dc_stream's timing struct.

Bug: https://bugs.freedesktop.org/show_bug.cgi?id=107153
Signed-off-by: Leo (Sunpeng) Li <sunpeng.li@amd.com>
Reviewed-by: Mikita Lipski <Mikita.Lipski@amd.com>
Acked-by: Bhawanpreet Lakha <Bhawanpreet.Lakha@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/i915/kvmgt: Fix compilation error

gvt_pin_guest_page extracted some of the gvt_dma_map_page functionality:
commit 79e542f5af79 ("drm/i915/kvmgt: Support setting dma map for huge pages")

And yet, part of it was reintroduced in:
commit 39b4cbadb9a9 ("drm/i915/kvmgt: Check the pfn got from vfio_pin_pages")

Causing kvmgt part to no longer build. Let's remove it.

Reported-by: Tomasz Lis <tomasz.lis@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Cc: Changbin Du <changbin.du@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Acked-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180712155330.32055-1-michal.winiarski@intel.com
(cherry picked from commit 4eaf317a60fbea0555b936035002ca9bd9b9105d)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915/lpe: Mark LPE audio runtime pm as "no callbacks"

The LPE audio is a child device of i915, it is powered up and down
alongside the igfx and presents no independent runtime interface. This
aptly fulfils the description of a "No-Callback" Device, so mark it
thus.

Fixes: 183c00350ccd ("drm/i915: Fix runtime PM for LPE audio")
Testcase: igt/pm_rpm/basic-pci-d3-state
Testcase: igt/pm_rpm/basic-rte
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Takashi Iwai <tiwai@suse.de>
Cc: Pierre-Louis Bossart <pierre-louis.bossart@linux.intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: stable@vger.kernel.org
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180802140416.6062-1-chris@chris-wilson.co.uk
(cherry picked from commit 46e831abe864a6b59fa3de253a681c0f2ee1bf2f)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Revert "drm/i915/icl: WaEnableFloatBlendOptimization"

The register for 0xe420 is unable to hold any value, including
this bit. The documentation is also mixed between having a
register bit for toggle and having a state command setup
for it. Apparently the register toggle is deprecated.

Remove the register toggle as evidence shows it's futile.

The thing remaining is an apology and humble request for
Mesa folks to resurrect their state setup for this as they
were on right track from start.

This reverts commit 0bf059f3532bb39c52d917142206a8554fc2f1c5.

Fixes: 0bf059f3532b ("drm/i915/icl: WaEnableFloatBlendOptimization")
References: HSDES#1406393558
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Anuj Phogat <anuj.phogat@gmail.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Signed-off-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Acked-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730120636.26958-1-mika.kuoppala@linux.intel.com
(cherry picked from commit c358514ba8da9e235876db1628cedd19a35803c6)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Interactive RPS mode

RPS provides a feedback loop where we use the load during the previous
evaluation interval to decide whether to up or down clock the GPU
frequency. Our responsiveness is split into 3 regimes, a high and low
plateau with the intent to keep the gpu clocked high to cover occasional
stalls under high load, and low despite occasional glitches under steady
low load, and inbetween. However, we run into situations like kodi where
we want to stay at low power (video decoding is done efficiently
inside the fixed function HW and doesn't need high clocks even for high
bitrate streams), but just occasionally the pipeline is more complex
than a video decode and we need a smidgen of extra GPU power to present
on time. In the high power regime, we sample at sub frame intervals with
a bias to upclocking, and conversely at low power we sample over a few
frames worth to provide what we consider to be the right levels of
responsiveness respectively. At low power, we more or less expect to be
kicked out to high power at the start of a busy sequence by waitboosting.

Prior to commit e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active
request") whenever we missed the frame or stalled, we would immediate go
full throttle and upclock the GPU to max. But in commit e9af4ea2b9e7, we
relaxed the waitboosting to only apply if the pipeline was deep to avoid
over-committing resources for a near miss. Sadly though, a near miss is
still a miss, and perceptible as jitter in the frame delivery.

To try and prevent the near miss before having to resort to boosting
after the fact, we use the pageflip queue as an indication that we are
in an "interactive" regime and so should sample the load more frequently
to provide power before the frame misses it vblank. This will make us
more favorable to providing a small power increase (one or two bins) as
required rather than going all the way to maximum and then having to
work back down again. (We still keep the waitboosting mechanism around
just in case a dramatic change in system load requires urgent uplocking,
faster than we can provide in a few evaluation intervals.)

v2: Reduce rps_set_interactive to a boolean parameter to avoid the
confusion of what if they wanted a new power mode after pinning to a
different mode (which to choose?)
v3: Only reprogram RPS while the GT is awake, it will be set when we
wake the GT, and while off warns about being used outside of rpm.
v4: Fix deferred application of interactive mode
v5: s/state/interactive/
v6: Group the mutex with its principle in a substruct

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=107111
Fixes: e9af4ea2b9e7 ("drm/i915: Avoid waitboosting on the active request")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Radoslaw Szwichtenberg <radoslaw.szwichtenberg@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180731132629.3381-1-chris@chris-wilson.co.uk
(cherry picked from commit 60548c554be2830d29d2533dad0ac8133347ee51)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/i915: Fix psr sink status report.

First of all don't try to read dpcd if PSR is not even supported.

But also, if read failed return -EIO instead of reporting via a
backchannel.

v2: fix dev_priv: At this level m->private is the connector. (CI/DK)
    don't convert dpcd read errors to EIO. (DK)

Fixes: 5b7b30864d1d ("drm/i915/psr: Split sink status into a separate debugfs node")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Cc: José Roberto de Souza <jose.souza@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180720003155.16290-1-rodrigo.vivi@intel.com
(cherry picked from commit 7a72c78bdd0a1ea1d879610542679cc680398220)
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

drm/etnaviv: fix crash in GPU suspend when init failed due to buffer placement

When the suballocator was unable to provide a suitable buffer for the MMUv1
linear window, we roll back the GPU initialization. As the GPU is runtime
resumed at that point we need to clear the kernel cmdbuf suballoc entry to
properly skip any attempt to manipulate the cmdbuf when the GPU gets shut
down in the runtime suspend later on.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

drm/etnaviv: change return type to vm_fault_t

Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.

Ref- commit 1c8f422059ae ("mm: change return type to vm_fault_t")

Previously vm_insert_page() returns err which driver
mapped into VM_FAULT_* type. The new function
vmf_insert_page() will replace this inefficiency by
returning VM_FAULT_* type.

vmf_error() is the newly introduce inline function
in 4.17-rc6.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

drm/etnaviv: protect sched job submission with fence mutex

The documentation of drm_sched_job_init and drm_sched_entity_push_job has
been clarified. Both functions should be called under a shared lock, to
avoid jobs getting pushed into the scheduler queue in a different order
than their sched_fence seqnos, which will confuse checks that are looking
at the seqnos to infer information about completion order.

Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

drm/etnaviv: mmuv2: use memset32 to init scratch page

Replace the open-coded scratch page initialization loop with memset32

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Signed-off-by: Lucas Stach <l.stach@pengutronix.de>

drm/msm/adreno: Remove VLA usage

In the quest to remove all stack VLA usage from the kernel[1], this
switches to using a kasprintf()ed buffer. Return paths are updated
to free the allocation.

[1] https://lkml.kernel.org/r/CA+55aFzCG-zNmZwX4A2FQpadafLfEzK6CC=qPXydAacU1RqZWA@mail.gmail.com

Signed-off-by: Kees Cook <keescook@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/amd/display: Only require EDID read for HDMI and DVI

[Why]
VGA sometimes has trouble retrieving the EDID on very long cables, KVM
switches, or old displays.

[How]
Only require EDID read for HDMI and DVI and exempt other types (DP,
VGA). We currently don't support VGA but if anyone adds support in the
future this might get overlooked.

Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Suggested-by: Michel Dänzer <michel@daenzer.net>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: Report non-DP display as disconnected without EDID

[Why]
Some boards seem to have a problem where HPD is high on HDMI even though
no display is connected. We don't want to report these as connected. DP
spec still requires us to report DP displays as connected when HPD is
high but we can't read the EDID in order to go to fail-safe mode.

[How]
If connector_signal is not DP abort detection if we can't retrieve the
EDID.

v2: Add Bugzilla and stable

Bugzilla: https://bugs.freedesktop.org/107390
Bugzilla: https://bugs.freedesktop.org/106846
Cc: stable@vger.kernel.org
Signed-off-by: Harry Wentland <harry.wentland@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Nicholas Kazlauskas <nicholas.kazlauskas@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

gpu: drm: msm: Change return type to vm_fault_t

Use new return type vm_fault_t for fault handler. For
now, this is just documenting that the function returns
a VM_FAULT value rather than an errno. Once all instances
are converted, vm_fault_t will become a distinct type.

Ref- commit 1c8f422059ae ("mm: change return type to vm_fault_t")

Previously vm_insert_mixed() returns err which driver
mapped into VM_FAULT_* type. The new function
vmf_insert_mixed() will replace this inefficiency by
returning VM_FAULT_* type.

vmf_error() is the newly introduce inline function
in 4.17-rc6.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Reviewed-by: Matthew Wilcox <mawilcox@microsoft.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>

gpu: ipu-v3: default to id 0 on missing OF alias

This is better than storing -ENODEV in the id number. This fixes SoCs
with only one IPU that don't specify an IPU alias in the device tree.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

gpu: ipu-v3: Fix U/V offset macros for planar 4:2:0

The U and V offset macros for planar 4:2:0 (U_OFFSET, V_OFFSET, and
UV_OFFSET), are not correct. The height component to the offset was
calculated as:

(pix->width * y / 4)

But this does not produce correct offsets for odd values of y (luma
line #). The luma line # must be decimated by two to produce the
correct U/V line #, so the correct formula is:

(pix->width * (y / 2) / 2)

Signed-off-by: Steve Longerbeam <steve_longerbeam@mentor.com>
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

gpu: ipu-v3: add support for XRGB32 and XBGR32 V4L2 pixel formats

These should be used instead of the ill-defined deprecated RGB32 and
BGR32 V4L2 pixel formats.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

drm/i2c: tda998x: move tda998x_set_config() into tda998x_create()

Move the non-DT configuration of the TDA998x into tda998x_create()
so that we do all setup in one place.

Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

drm/i2c: tda998x: split tda998x_encoder_dpms into enable/disable

This fits better with the drm_bridge callbacks for when this
driver becomes a drm_bridge.

Suggested-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
[edited by rmk to just split the tda998x_encoder_dpms() function
 and restore the double-disable protection we originally had,
 preserving original behaviour.]
Tested-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

drm/i2c: tda998x: find the drm_device via the drm_connector

This prepares for being a drm_bridge which will not register the
encoder. That makes the connector the better choice.

Reviewed-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Peter Rosin <peda@axentia.se>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>

drm/ttm: clean up non-x86 definitions on ttm_tt

All non-x86 definitions are moved to ttm_set_memory header, so remove it from
ttm_tt.c.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: Add ttm_set_pages_wc and ttm_set_pages_uc helper

These two helpers will be used on set page caching.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/ttm: fix missed conversion of set_pages_array_uc

This patch fixed the error when do not configure CONFIG_X86, otherwise, below
error will be encountered.

All errors (new ones prefixed by >>):

   drivers/gpu/drm/ttm/ttm_page_alloc_dma.c: In function 'ttm_set_pages_caching':
>> drivers/gpu/drm/ttm/ttm_page_alloc_dma.c:272:7: error: implicit declaration of function 'set_pages_array_uc'; did you mean
+'ttm_set_pages_array_uc'? [-Werror=implicit-function-declaration]
      r = set_pages_array_uc(pages, cpages);
          ^~~~~~~~~~~~~~~~~~
          ttm_set_pages_array_uc
   cc1: some warnings being treated as errors

Reported-by: kbuild test robot <lkp@intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/imx: Convert drm_atomic_helper_suspend/resume()

convert drm_atomic_helper_suspend/resume() to use
drm_mode_config_helper_suspend/resume().

with this conversion, the remaining member of struct
imx_drm_device, state, will be no more useful and it
could be removed forever.

Signed-off-by: Souptick Joarder <jrdr.linux@gmail.com>
Signed-off-by: Ajit Negi <ajitn.linux@gmail.com>
[p.zabel@pengutronix.de: rebased onto drm-next, updated commit message]
Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>

Merge branch 'drm-armada-devel' of git://git.armlinux.org.uk/~rmk/linux-arm into drm-next

This set of changes migrates Armada DRM from legacy modeset to atomic
modeset.  This is everything from the "Transition Armada DRM planes to
atomic state" and "Finish Armada DRM transition to atomic modeset"
patch sets as posted on drm-devel, excluding the "Finish Armada DRM DT
support" series.

These series did not evoke any comments - if there are any, these can
be addressed via follow up patches.

Developed and tested on Dove Cubox with xf86-video-armada including the
overlay plane, and also tested with the tools in libdrm.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20180730110543.GA30664@rmk-PC.armlinux.org.uk

Merge tag 'drm-msm-next-2018-07-30' of git://people.freedesktop.org/~robclark/linux into drm-next

A bit larger this time around, due to introduction of "dpu1" support
for the display controller in sdm845 and beyond.  This has been on
list and undergoing refactoring since Feb (going from ~110kloc to
~30kloc), and all my review complaints have been addressed, so I'd be
happy to see this upstream so further feature work can procede on top
of upstream.

Also includes the gpu coredump support, which should be useful for
debugging gpu crashes.  And various other misc fixes and such.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAF6AEGv-8y3zguY0Mj1vh=o+vrv_bJ8AwZ96wBXYPvMeQT2XcA@mail.gmail.com

drm/amdgpu/pm: Fix potential Spectre v1

idx can be indirectly controlled by user-space, hence leading to a
potential exploitation of the Spectre variant 1 vulnerability.

This issue was detected with the help of Smatch:

drivers/gpu/drm/amd/amdgpu/amdgpu_pm.c:408 amdgpu_set_pp_force_state()
warn: potential spectre issue 'data.states'

Fix this by sanitizing idx before using it to index data.states

Notice that given that speculation windows are large, the policy is
to kill the speculation on the first load and not worry if it can be
completed with a dependent load/store [1].

[1] https://marc.info/?l=linux-kernel&m=152449131114778&w=2

Cc: stable@vger.kernel.org
Signed-off-by: Gustavo A. R. Silva <gustavo@embeddedor.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/display: add missing void parameter to dc_create_transfer_func

Add a missing void parameter to function dc_create_transfer_func, fixes
sparse warning:

warning: non-ANSI function declaration of function 'dc_create_transfer_func'

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Replace ttm_bo_unref with ttm_bo_put

The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.

The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/radeon: Replace ttm_bo_reference with ttm_bo_get

The function ttm_bo_get acquires a reference on a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Replace ttm_bo_unref with ttm_bo_put

The function ttm_bo_put releases a reference to a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

A call to ttm_bo_unref takes the address of the TTM BO object's pointer and
clears the pointer's value to NULL. This is not necessary in most cases and
sometimes even worked around by the calling code. A call to ttm_bo_put only
releases the reference without clearing the pointer.

The current behaviour of cleaning the pointer is kept in the calling code,
but should be removed if not required in a later patch.

v2:
 * set prefix to drm/amdgpu

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Replace ttm_bo_reference with ttm_bo_get

The function ttm_bo_get acquires a reference on a TTM buffer object. The
function's name is more aligned to the Linux kernel convention of naming
ref-counting function _get and _put.

v2:
 * changed prefix to drm/amdgpu

Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/scheduler: stop setting rq to NULL

We removed the redundancy of having an extra scheduler field, so we
can't set the rq to NULL any more or otherwise won't know which
scheduler to use for the cleanup.

Just remove the entity from the scheduling list instead.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Bug: https://bugs.freedesktop.org/show_bug.cgi?id=107367
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/scheduler: only kill entity if last user is killed v2

Note which task is using the entity and only kill it if the last user of
the entity is killed. This should prevent problems when entities are leaked to
child processes.

v2: add missing kernel doc

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com>
Acked-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: create an empty bo_list if no handle is provided

Instead of having extra handling just create an empty bo_list when no
handle is provided.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: allocate the bo_list array after the list

This avoids multiple allocations for the head and the array.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add bo_list iterators

Add helpers to iterate over all entries in a bo_list.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: nuke amdgpu_bo_list_free

The RCU grace period is harmless and avoiding it is not worth the effort
of doubling the implementation.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: always recreate bo_list

The bo_list handle is allocated by OP_CREATE, so in OP_UPDATE here we just
re-create the bo_list object and replace the handle. This way we don't
need locking to protect the bo_list because it's always re-created when
changed.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: move bo_list defines to amdgpu_bo_list.h

Further demangle amdgpu.h

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add new amdgpu_vm_bo_trace_cs() function v2

This allows us to trace all VM ranges which should be valid inside a CS.

v2: dump mappings without BO as well

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-and-tested-by: Andrey Grodzovsky <andrey.grodzovsky@amd.com> (v1)
Reviewed-by: Huang Rui <ray.huang@amd.com> (v1)
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: return error if both BOs and bo_list handle is given

Return -EINVAL when both the BOs as well as a list handle is provided in
the IOCTL.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix total size calculation

long might only be 32bit in size and we can easily use more than 4GB
here.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Acked-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/sched: remove unneeded -Iinclude/drm compiler flag

I refactored the include directives under include/drm/ some time ago.
This flag is unneeded.

Signed-off-by: Masahiro Yamada <yamada.masahiro@socionext.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Nayan Deshmukh <nayan26deshmukh@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add proper error handling to amdgpu_bo_list_get

Otherwise we silently don't use a BO list when the handle is invalid.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Huang Rui <ray.huang@amd.com>
Reviewed-by: Michel Dänzer <michel.daenzer@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: fix a reversed condition

This test was reversed so it would end up leading to vddnb value
can't be read via hwmon on APU.

Reviewed-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/pp: Convert voltage unit in mV*4 to mV on CZ/ST

the voltage showed in debugfs and hwmon should be in mV

Reviewed-by: Evan Quan <evan.quan@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/amd/pp: Delete unused temp variables

Only delete the dead temp variables in Polaris.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/pp/Polaris12: Fix a chunk of registers missed to program

DIDTConfig_Polaris12[] table missed a big chunk of data.

Pointed by aidan.fabius <aidan.fabius@coreavi.com>

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

drm/arm/hdlcd: Reject atomic commits that disable only the plane

The HDLCD engine needs an active plane while the CRTC is active, as
it will start scanning out data from HDLCD_REG_FB_BASE once it gets
enabled. Make sure that the only available plane doesn't get disabled
while the CRTC remains active, as this will scanout invalid data.

Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm: arm: hdlcd: Use drm_atomic_helper_shutdown() to disable planes on removal

The plane cleanup handler currently calls drm_plane_helper_disable(),
which is a legacy helper function. Replace it with a call to
drm_atomic_helper_shutdown() at removal time. The plane .destroy()
handler now consisting only of a call to drm_plane_cleanup(), replace it
with direct calls to that function.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm: arm: hdlcd: Don't destroy plane manually in hdlcd_setup_crtc()

The top-level error handler calls drm_mode_config_cleanup() which will
destroy all planes. There's no need to destroy them manually in lower
error handlers.

Signed-off-by: Laurent Pinchart <laurent.pinchart+renesas@ideasonboard.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/arm/hdlcd: Use drm_fb_cma_fbdev_init/fini()

Use drm_fb_cma_fbdev_init() and drm_fb_cma_fbdev_fini() which relies on
the fact that drm_device holds a pointer to the drm_fb_helper structure.
This means that the driver doesn't have to keep track of that.
Also use the drm_fb_helper functions directly.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Liviu Dudau <liviu.dudau@arm.com>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/arm/hdlcd: Use drm_mode_config_helper_suspend/resume()

Replace driver's code with the generic helpers that do the same thing
including the NULL check.

Cc: Liviu Dudau <liviu.dudau@arm.com>
Cc: Brian Starkey <brian.starkey@arm.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Liviu Dudau <liviu.dudau@arm.com>

drm/msm/disp/dpu: fix two spelling mistakes

Trivial fix to spelling mistake in error messages
"diable" -> "disable"
"cliend" -> "client"

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

Merge branch 'drm-udl-next' of git://people.freedesktop.org/~airlied/linux into drm-next

A set of cleanups and fixes for Mikulas for using udl on arm boards.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/CAPM=9twQNgrmfe0=Okq1NTgWHRQXy+AzeDy8A0p_-y856p4vtA@mail.gmail.com

udl-kms: dont spam the syslog with debug messages

The udl kms driver writes messages to the syslog whenever some application
opens or closes /dev/fb0 and whenever the user switches between the
Xserver and the console.

This patch changes the priority of these messages to debug.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

udl-kms: use spin_lock_irq instead of spin_lock_irqsave

spin_lock_irqsave and spin_unlock_irqrestore is inteded to be called from
a context where it is unknown if interrupts are enabled or disabled (such
as interrupt handlers). From a process context, we should call
spin_lock_irq and spin_unlock_irq, that avoids the costly pushf and popf
instructions.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

udl-kms: avoid prefetch

Modern processors can detect linear memory accesses and prefetch data
automatically, so there's no need to use prefetch.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

udl-kms: avoid division

Division is slow, so it shouldn't be done by the pixel generating code.
The driver supports only 2 or 4 bytes per pixel, so we can replace
division with a shift.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

udl-kms: fix crash due to uninitialized memory

We must use kzalloc when allocating the fb_deferred_io structure.
Otherwise, the field first_io is undefined and it causes a crash.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

udl-kms: handle allocation failure

Allocations larger than PAGE_ALLOC_COSTLY_ORDER are unreliable and they
may fail anytime. This patch fixes the udl kms driver so that when a large
alloactions fails, it tries to do multiple smaller allocations.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

udl-kms: change down_interruptible to down

If we leave urbs around, it causes not only leak, but also memory
corruption. This patch fixes the function udl_free_urb_list, so that it
always waits for all urbs that are in progress.

Signed-off-by: Mikulas Patocka <mpatocka@redhat.com>
Cc: stable@vger.kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>

dt-bindings: msm/disp: Add bindings for Snapdragon 845 DPU

Adds bindings for Snapdragon 845 display processing unit

Changes in v2:
- Use SoC specific compatibles for mdss and dpu (Rob Herring)
- Use assigned-clocks to set initial clock frequency (Rob Herring)

Changes in v3 (all suggested by Rob Herring):
- Rename mdss_phys to mdss
- Correct description for clocks/assigned-clocks
- Rename mdp_phys to mdp
- Rename vbif_phys to vbif
- Remove redundant interrupt-parent from mdss_mdp
- Fully specify 'ranges' and use relative reg address in mdss_mdp

Cc: Rob Herring <robh+dt@kernel.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

dt-bindings: msm/dsi: Add mdp transfer time to msm dsi binding

Adds mdp transfer time to msm dsi binding

Changes in v3:
- Added Rob's R-b

Reviewed-by: Rob Herring <robh@kernel.org>
Signed-off-by: Jeykumar Sankaran <jsanka@codeaurora.org>
Signed-off-by: Rajesh Yadav <ryadav@codeaurora.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>

drm/msm/disp/dpu: Mark a handful of functions as static

Mark a number of static functions that are only unsed in the file
that defines them and remove the prototypes from the headers where
needed.

Signed-off-by: Jordan Crouse <jcrouse@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>