drm: Restrict drm_mode_set_config_internal to non-atomic drivers

This is another case where we really can't reconstruct a acquire ctx
in any useful fashion because all the callers are legacy drivers. So
like drm_plane_force_disable simply restrict it to non-atomic drivers
so that it's clear we're ok with passing a NULL ctx.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-17-daniel.vetter@ffwll.ch

drm: simplify the locking in the GETCRTC ioctl

No need to grab both plane and crtc locks at the same time, we can do
them one after the other. If userspace races it'll get what it
deserves either way.

This removes another user of drm_modeset_lock_crtc. There's only one
left.

v2: Make sure all access to primary->state is properly protected
(Harry).

Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170328070145.21520-1-daniel.vetter@ffwll.ch

drm/atomic-helper: remove backoff hack from page_flip

Yay, we can now properly retry in case of deadlocks or whatever!

Also don't forget to remove the transitional crtc->acquire_ctx
assignment again.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-13-daniel.vetter@ffwll.ch

drm: Add acquire ctx parameter to ->page_flip(_target)

Again just going through the motions, no functional changes in here.

Cc: Gerd Hoffmann <kraxel@redhat.com>
Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>t
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-12-daniel.vetter@ffwll.ch

drm: Roll out acquire context for the page_flip ioctl

Again just prep work.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-11-daniel.vetter@ffwll.ch

drm/atomic-helper: remove backoff hack from disable/update_plane

We can now properly retry at the top level, yay!

v2: Also remove the temporary acquire_ctx hack again, no longer
needed!

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-6-daniel.vetter@ffwll.ch

drm: Add acquire ctx parameter to ->plane_disable

Nouveau had a few direct calls to ->disable_plane, I replaced those
with drm_plane_force_disable. Same story for shmob.

Otherwise no code changes.

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-5-daniel.vetter@ffwll.ch

drm: drm_plane_force_disable is not for atomic drivers

This way I can explain why it'll be fine to pass a NULL acquire ctx
here in the next patch.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-4-daniel.vetter@ffwll.ch

drm: Add acquire ctx parameter to ->update_plane

Just rolling it out, no code change here.

Cc: Ben Skeggs <bskeggs@redhat.com>
Cc: Russell King <linux@armlinux.org.uk>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Eric Anholt <eric@anholt.net>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-3-daniel.vetter@ffwll.ch

drm: Wire up proper acquire ctx for plane functions

This is just prep work to get an acquire ctx into every place where we
call ->update_plane or ->disable_plane.

v2: Keep the hidden acquire_ctx pointers valid while transitioning.

Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-2-daniel.vetter@ffwll.ch

drm: document the all the atomic iterators

Mostly because I want the links from the newly-added @state functions
to work. But I think explaining when they're useful and that the
implicit one is deprecated is good either way. Slightly repetitive
unfortunately.

Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170328155349.5972-3-daniel.vetter@ffwll.ch

drm: Document kms locking a bit better

The rules are getting real hard, better to dump my brain into text a
bit. This is by far not complete, but I think I reasonable start at
least.

Some of the older kms structures would need a full doc review anyway
...

Cc: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170328155349.5972-2-daniel.vetter@ffwll.ch

drm/doc: remove standard connector props from the csv file

They're properly documented in drm_connector.c now, and this
csv file is a horrible mess. Better to remove it.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Harry Wentland <harry.wentland@amd.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170328155349.5972-1-daniel.vetter@ffwll.ch

drm: Add description for scdc variable

This patch adds description about 'scdc' variable in drm_hdmi_info
structure, to fix this warning during doc-build.

"drm_connector.h:140: warning: No description found for parameter 'scdc'"

V2: Rebase
V3: Added extra *
V4: Removed merged conflict
V5: Removed extra line at start of structure (Daniel)
V6: Make description single line (Daniel)

Cc: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1490684779-21633-1-git-send-email-shashank.sharma@intel.com

drm/tegra: Don't use modeset_lock_crtc

Yes the help text is unhelpful, but atomic drivers should never use
this. Just grab the lock without context or anything.

Also an aside: Checking ->active like this doesn't protect against
nonblocking commits, this is rather bogus.

Cc: Thierry Reding <thierry.reding@gmail.com>
Acked-by: Thierry Reding <thierry.reding@gmail.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-8-daniel.vetter@ffwll.ch

drm: bochs: Prevent double-free of fb helper

If fbdev registration fails for whatever reason, the error path of
bochs_fbdev_init() will call bochs_fbdev_fini(), but since an fbdev
initialization error is not fatal to the probe function, a subsequent
device removal will try to call bochs_fbdev_fini() again, hitting the
Oops below.

This was detected by 0-day with a failing framebuffer registration and
CONFIG_DEBUG_TEST_DRIVER_REMOVE=y.  This reproduces the scenario I
mentioned above at insmod time, because the test attempts to remove the
device right after probing.

root@debian:~# insmod bochs-drm.ko
[   17.609635] [drm] Found bochs VGA, ID 0xb0c0.
[   17.612974] [drm] Framebuffer size 16384 kB @ 0xfa000000, mmio @ 0xfebf2000.
[   17.613938] [TTM] Zone  kernel: Available graphics memory: 1022244 kiB
[   17.614701] [TTM] Initializing pool allocator
[   17.615427] [TTM] Initializing DMA pool allocator
[   17.619143] fbcon: bochsdrmfb (fb0) is primary device
[   17.619428] Console: switching to colour frame buffer device 128x48
[   17.621047] bochs-drm 0000:00:02.0: fb0: bochsdrmfb frame buffer device
[   17.641111] [drm] Initialized bochs-drm 1.0.0 20130925 for 0000:00:02.0 on minor 0
[   17.642380] general protection fault: 0000 [#1] SMP
[   17.642985] Modules linked in: bochs_drm(+)
[   17.643259] CPU: 4 PID: 3279 Comm: insmod Tainted: G        W       4.11.0-rc1+ #119
[   17.643259] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[   17.643259] task: ffff88007af35e00 task.stack: ffffc90000d84000
[   17.643259] RIP: 0010:drm_fb_helper_fini+0x8e/0x110
[   17.643259] RSP: 0018:ffffc90000d87ad0 EFLAGS: 00010202
[   17.643259] RAX: dead000000000200 RBX: ffff8800790d5770 RCX: 0000000000000000
[   17.652101] RDX: dead000000000100 RSI: 000000007fffffff RDI: ffffffff81eaf820
[   17.652101] RBP: ffffc90000d87ae0 R08: 0000000000000000 R09: ffff88007271d918
[   17.652101] R10: ffffc90000d87a88 R11: 0000000000000000 R12: 0000000000000000
[   17.652101] R13: ffff8800790d56d0 R14: 0000000000000000 R15: 0000000000000000
[   17.652101] FS:  00007f9285995700(0000) GS:ffff88007cf00000(0000) knlGS:0000000000000000
[   17.652101] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   17.652101] CR2: 0000564f1cf9f1e8 CR3: 0000000079686000 CR4: 00000000000006e0
[   17.652101] Call Trace:
[   17.652101]  bochs_fbdev_fini+0x24/0x90 [bochs_drm]
[   17.652101]  bochs_unload+0x16/0x50 [bochs_drm]
[   17.652101]  drm_dev_unregister+0x37/0xd0
[   17.652101]  drm_put_dev+0x31/0x60
[   17.652101]  bochs_pci_remove+0x10/0x20 [bochs_drm]
[   17.652101]  pci_device_remove+0x34/0xb0
[   17.652101]  driver_probe_device+0xd0/0x370
[   17.652101]  __driver_attach+0x96/0xa0
[   17.652101]  ? driver_probe_device+0x370/0x370
[   17.652101]  bus_for_each_dev+0x5b/0x90
[   17.652101]  driver_attach+0x19/0x20
[   17.652101]  bus_add_driver+0x11c/0x220
[   17.652101]  driver_register+0x5b/0xd0
[   17.652101]  ? 0xffffffffa0006000
[   17.652101]  __pci_register_driver+0x47/0x50
[   17.652101]  drm_pci_init+0xe1/0xf0
[   17.652101]  ? 0xffffffffa0006000
[   17.652101]  bochs_init+0x3c/0x1000 [bochs_drm]
[   17.652101]  do_one_initcall+0x3e/0x180
[   17.652101]  ? kmem_cache_alloc_trace+0x33/0x150
[   17.652101]  do_init_module+0x5a/0x1eb
[   17.652101]  load_module+0x1ea0/0x2650
[   17.652101]  ? __symbol_put+0x40/0x40
[   17.652101]  ? kernel_read_file+0x19e/0x1c0
[   17.652101]  ? kernel_read_file_from_fd+0x44/0x70
[   17.652101]  SYSC_finit_module+0xba/0xc0
[   17.652101]  SyS_finit_module+0x9/0x10
[   17.652101]  entry_SYSCALL_64_fastpath+0x1a/0xa9
[   17.652101] RIP: 0033:0x7f92854da119
[   17.652101] RSP: 002b:00007ffcd0390498 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
[   17.652101] RAX: ffffffffffffffda RBX: 00007f928578eb58 RCX: 00007f92854da119
[   17.652101] RDX: 0000000000000000 RSI: 0000564f1c8bd638 RDI: 0000000000000003
[   17.652101] RBP: 000000000000270e R08: 0000000000000000 R09: 00007f9285790ea0
[   17.652101] R10: 0000000000000003 R11: 0000000000000246 R12: 00007f928578eb58
[   17.652101] R13: 0000000000001020 R14: 0000564f1cf9e1c0 R15: 00007f928578eb00
[   17.652101] Code: c7 20 f8 ea 81 e8 b3 3e 50 00 48 8b 83 d0 00 00 00 48 8d 93 d0 00 00 00 48 39 c2 74 46 48 8b 83 d8 00 00 00 48 8b 93 d0 00 00 00 <48> 89 42 08 48 89 10 48 b8 00 01 00 00 0000 ad de 48 89 83 d0
[   17.652101] RIP: drm_fb_helper_fini+0x8e/0x110 RSP: ffffc90000d87ad0
[   17.653331] ---[ end trace 542fd75a2e60a6a4 ]---

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170324045444.11912-1-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/atomic: Introduce drm_atomic_helper_shutdown

The trouble here is that it does multiple atomic commits under one
drm_modeset_lock_all, which breaks the behind-the-scenes acquire
context magic that function pulls off. It's much better to have one
overall atomic commit. That we still have multiple atomic commits
prevents us from adding some pretty useful debug checks to the atomic
machinery.

Hence it is really a bad idea to call the legacy
drm_crtc_force_disable_all() function. There's 2 atomic drivers using
this still, nouveau and tinydrm. To fix this, introduce a new
drm_atomic_helper_shutdown() by extracting the code from i915.

While at it improve kernel-doc and catch future offenders by
sprinkling a WARN_ON into the legacy function. We should probably move
those into the legacy modeset helpers, too ...

v2: Make it compile on arm drivers too (Noralf).

v3: Correct kerneldoc to point at _disable_all().

Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Noralf Trønnes <noralf@tronnes.org>
Cc: Ben Skeggs <bskeggs@redhat.com>
Tested-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321164149.31531-1-daniel.vetter@ffwll.ch

drm/tinydrm: Fix drm_driver.fops.owner

drm_driver.fops can't be shared since the owner then becomes tinydrm.ko.
Move the fops declaration to the driver.

v2: Use DEFINE_DRM_GEM_CMA_FOPS

Reported-by: Daniel Vetter <daniel.vetter@intel.com>
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170326142529.16938-1-noralf@tronnes.org

drm: dw_hdmi: Don't rely on the status of the bridge for updating HPD

Currently, the irq handler that monitors changes for HPD and RX_SENSE
relies on the status of the bridge for updating the status of the HPD.
The update is done only when the bridge is enabled.

However, on Rockchip platforms we have found use cases where it could be
a problem. When HDMI is being used, turning off/on the screen or
unplugging/re-plugging the cable, the following simplified code path
will happen:

- dw_hdmi_irq() will be triggered by an HPD event, as the bridge is on
hdmi->disabled is false, then the handler will update the rxsense flag
accordingly.
- dw_hdmi_update_power() will be invoked with the mode
DRM_FORCE_UNSPECIFIED and rxsense == 1, so dw_hdmi_poweroff() will be
called and the PHY will be desactivated (its pixel clocks and TMDS)

[...]

- dw_hdmi_bridge_disable() will be invoked, the bridge will be marked as
disabled.

- dw_hdmi_irq() will be triggered by an HPD event, as the bridge is
currently disabled the HPD status won't be updated, so hdmi->rxsense
won't be changed. Even if the data part of the PHY is disabled, this
information coming from the HDMI Transmitter is correct and should be
saved.

[...]

- dw_hdmi_bridge_enable() will be invoked, the bridge will be marked as
enabled.
- dw_hdmi_update_power() will be called. When hdmi->force is equal to
DRM_FORCE_UNSPECIFIED the function will rely on hdmi->rxsense. If this
field has not been updated by the irq handler, it will be false and
DRM_FORCE_ON won't be put to hdmi->force.

Consequently, most of the time dw_hdmi_poweron() won't be called in this
use case, TMDS won't be re-enabled the PHY won't be re-initialized,
resulting in a "Signal not found".

This commit fixes the issue by removing the check for "!hdmi->disabled".
As already explained, even if the PHY is partially disabled, information
coming from HDMI Transmitter about HPD should be saved for a later use.

Signed-off-by: Romain Perier <romain.perier@collabora.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: https://patchwork.freedesktop.org/patch/143602/

drm/vblank: Remove DRM_VBLANKTIME_IN_VBLANK

The core code doesn't care at all about this, it's entirely dead.

Cc: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322083617.13361-11-daniel.vetter@ffwll.ch

drm/todo: Add tinydrm refactoring ideas

Discussed with Noralf on the list a bit.

An open question is tinydrm vs. drm_panel, but until we have a clear
idea what's really needed in that space, I think it's best to just
move forward with what we have.

Cc: Noralf Trønnes <noralf@tronnes.org>
Acked-by: Noralf Trønnes <noralf@tronnes.org>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322083617.13361-10-daniel.vetter@ffwll.ch

drm: Extract drm_ioctl.h

To match the drm_ioctl.c we already have.

v2: Remove spurious space (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

drm/tilcdc: Drop calls to modeset_lock_crtc

Again this is an internal helper, not the official way to lock a crtc.

Cc: Jyri Sarha <jsarha@ti.com>
Cc: Tomi Valkeinen <tomi.valkeinen@ti.com>
Reviewed-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Acked-by: Jyri Sarha <jsarha@ti.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322215058.8671-9-daniel.vetter@ffwll.ch

drm/rockchip/dsi: correct the grf_switch_reg name

For the RK3399, the grf_switch_reg name should be RK3399_GRF_SOC_CON20,
not RK3399_GRF_SOC_CON19.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Brian Norris <briannorris@chromium.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1490147691-4489-5-git-send-email-zyw@rock-chips.com

drm/rockchip/dsi: enable the grf clk before writing grf registers

For RK3399, the grf clk should be enabled before writing grf registers,
otherwise the register value can not be changed.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1490147691-4489-4-git-send-email-zyw@rock-chips.com

dt-bindings: add the grf clock for dw-mipi-dsi

For RK3399, the grf clock should be controlled by dw-mipi-dsi driver,
add the description for this clock.

Acked-by: Rob Herring <robh@kernel.org
Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1490147691-4489-3-git-send-email-zyw@rock-chips.com

drm/rockchip/dsi: check phy_cfg_clk only for RK3399

For RK3399, the phy_cfg_clk is a required clock, if phy_cfg_clk is
disabled, MIPI phy can not work. Let's return a error if there is no
phy_cfg_clk in dts property, when the pdata match RK3399.

Signed-off-by: Chris Zhong <zyw@rock-chips.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1490147691-4489-2-git-send-email-zyw@rock-chips.com

drm/rockchip: Refactor the component match logic.

Currently we are adding all components from the dts, if one of their
drivers been disabled, we would not be able to bring up others.

Refactor component match logic, follow exynos drm.

Signed-off-by: Jeffy Chen <jeffy.chen@rock-chips.com>
Reviewed-by: Andrzej Hajda <a.hajda@samsung.com>
Acked-by: Mark Yao <mark.yao@rock-chips.com>
Tested-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1490152880-21855-1-git-send-email-jeffy.chen@rock-chips.com

drm/debugfs: Add kerneldoc

I've decided to not document drm_debugfs_remove_files, it's on the way
out.

The biggest part is a huge todo.rst entry with what all should be
improved.

v2: Nits from Gabriel.

Cc: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322205401.24897-1-daniel.vetter@ffwll.ch

drm: document driver interface for CRC capturing

This was missed in Tomeu's patch. Also remove the kerneldoc for the
internal function, we don't document that in general.

While at it word-smith the docs slightly for more clarity.

Cc: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Reviewed-by: Tomeu Vizoso <tomeu.vizoso@collabora.com>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322083617.13361-4-daniel.vetter@ffwll.ch

drm: Extract drm_debugfs.h

Doc polish will follow in the next patch.

v2: Put the include guard #endif at the end (Ville).

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322205336.24549-1-daniel.vetter@ffwll.ch

drm: drop extern from function decls

It's the default storage class for functions, entirely redundant. And
a lot of these headers are a bit inconsistent due to organically
grown.

Reviewed-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170322083617.13361-2-daniel.vetter@ffwll.ch

drm/scdc: declare drm_scdc_get_scrambling_status

Fix sparse warning:

drivers/gpu/drm/drm_scdc_helper.c:138:6: warning: symbol
'drm_scdc_get_scrambling_status' was not declared. Should it be static?

Fixes: 62c58af32c93 ("drm/edid: detect SCDC support in HF-VSDB")
Cc: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Shashank Sharma <shashank.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1490193218-24806-1-git-send-email-jani.nikula@intel.com

Merge branch 'drm-next' of git://people.freedesktop.org/~airlied/linux into drm-misc-next

Resync with drm-next, I have a patch which currently can't be applied
because drm-misc-next lacked the latest drm/i915 code.

Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>

BackMerge tag 'v4.11-rc3' into drm-next

Linux 4.11-rc3 as requested by Daniel

Merge tag 'drm-misc-next-2017-03-21' of git://anongit.freedesktop.org/git/drm-misc into drm-next

drm-misc for 4.12, 2nd attempt this week:

- topic branch from Jon Corbet for the new graph kerneldoc support
- lots of graphs for kms/atomic things using the above
- some vblank query tuning from Chris
- gem/cma_fops macros
- moar docs

Driver stuff:
- vc4 hdmi audio, yay (Eric)
- dw-hdmi polish from a bunch of people
- some rockchip dp updates that didn't make last week (Chris Zhong)
- misc bridge&driver updates

* tag 'drm-misc-next-2017-03-21' of git://anongit.freedesktop.org/git/drm-misc: (37 commits)
  drm/edid: detect SCDC support in HF-VSDB
  drm/edid: detect SCDC support in HF-VSDB
  drm/edid: check for HF-VSDB block
  drm: Add SCDC helpers
  drm: bridge: dw-hdmi: add HDMI vendor specific infoframe config
  drm/bridge: dw_hdmi: support i2c extended read mode
  drm/msm: add stubs for msm_{perf,rd}_debugfs_cleanup
  drm: bochs: Don't remove uninitialized fbdev framebuffer
  drm: vc4: remove redundant check of plane being non-null
  drm/vc4: use platform_register_drivers
  dma-fence: add dma_fence_match_context helper
  drm/vc4: Add HDMI audio support
  dt-bindings: Document the dmas and dma-names properties for VC4 HDMI
  drm/atmel-hlcdc: Fix suspend/resume implementation
  drm: Skip the waitqueue setup for vblank queries
  drm: Defer disabling the vblank IRQ until the next interrupt (for instant-off)
  drm/doc: atomic overview, with graph
  drm/doc: diagram for mode objects and properties
  drm/doc: Consistent kerneldoc include order
  drm/doc: Add KMS overview graphs
  ...

Merge tag 'drm-intel-next-2017-03-20' of git://anongit.freedesktop.org/git/drm-intel into drm-next

More in i915 for 4.12:

- designware i2c fixes from Hans de Goede, in a topic branch shared
  with other subsystems (maybe, they didn't confirm, but requested the
  pull)
- drop drm_panel usage from the intel dsi vbt panel (Jani)
- vblank evasion improvements and tracing (Maarten and Ville)
- clarify spinlock irq semantics again a bit (Tvrtko)
- new ->pwrite backend hook (right now just for shmem pageche writes),
  from Chris
- more planar/ccs work from Ville
- hotplug safe connector iterators everywhere
- userptr fixes (Chris)
- selftests for cache coloring eviction (Matthew Auld)
- extend debugfs drop_caches interface for shrinker testing (Chris)
- baytrail "the rps kills the machine" fix (Chris)
- use new atomic state iterators, a lot (Maarten)
- refactor guc/huc code some (Arkadiusz Hiler)
- tighten breadcrumbs rbtree a bit (Chris)
- improve wrap-around and time handling in rps residency counters
  (Mika)
- split reset-in-progress in two flags, backoff and handoff (Chris)
- other misc reset improvements from a few people
- bunch of vgpu interaction fixes with recent code changes
- misc stuff all over, as usual

* tag 'drm-intel-next-2017-03-20' of git://anongit.freedesktop.org/git/drm-intel: (144 commits)
  drm/i915: Update DRIVER_DATE to 20170320
  drm/i915: Initialise i915_gem_object_create_from_data() directly
  drm/i915: Correct error handling for i915_gem_object_create_from_data()
  drm/i915: i915_gem_object_create_from_data() doesn't require struct_mutex
  drm/i915: Retire an active batch pool object rather than allocate new
  drm/i915: Add i810/i815 pci-ids for completeness
  drm/i915: Skip execlists_dequeue() early if the list is empty
  drm/i915: Stop using obj->obj_exec_link outside of execbuf
  drm/i915: Squelch WARN for VLV_COUNTER_CONTROL
  drm/i915/glk: Enable pooled EUs for Geminilake
  drm/i915: Remove superfluous i915_add_request_no_flush() helper
  drm/i915/vgpu: Neuter forcewakes for VGPU more thoroughly
  drm/i915: Fix vGPU balloon for ggtt guard page
  drm/i915: Avoid use-after-free of ctx in request tracepoints
  drm/i915: Assert that the context pin_counts do not overflow
  drm/i915: Wait for reset to complete before returning from debugfs/i915_wedged
  drm/i915: Restore engine->submit_request before unwedging
  drm/i915: Move engine->submit_request selection to a vfunc
  drm/i915: Split I915_RESET_IN_PROGRESS into two flags
  drm/i915: make context status notifier head be per engine
  ...

drm/dp: Split drm_dp_mst_allocate_vcpi

drm_dp_mst_allocate_vcpi() apart from setting up the vcpi structure,
also finds if there are enough slots available. This check is a duplicate
of that implemented in drm_dp_mst_find_vcpi_slots(). Let's move this check
out and reuse the existing drm_dp_mst_find_vcpi_slots() function to check
if there are enough vcpi slots before allocating them.

This brings the check to one place. Additionally drivers that will use MST
state tracking for atomic modesets can use the atomic version of
find_vcpi_slots() and reuse drm_dp_mst_allocate_vcpi()

Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-4-git-send-email-dhinakaran.pandiyan@intel.com

drm/dp: Kill unused MST vcpi slot availability tracking

The avail_slots member in the MST topology manager is never updated to
reflect the available vcpi slots. The check is effectively against
total slots, 63. So, let's make that check obvious and remove
avail_slots. While at it, make debug messages more descriptive.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Harry Wentland <Harry.wentland@amd.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-3-git-send-email-dhinakaran.pandiyan@intel.com

drm/dp: Kill total_pbn and total_slots in struct drm_dp_mst_topology_mgr

The total vcpi time slots is always 63 and does not depend on the link BW,
remove total_slots from MST topology manager struct. The next change is to
remove total_pbn which is hardcoded to 2560. The total PBN that the
topology manager allocates from depends on the link rate and is not a
constant. So, fix this by removing the total_pbn member itself.

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Archit Taneja <architt@codeaurora.org>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Harry Wentland <Harry.wentland@amd.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/1489648231-30700-2-git-send-email-dhinakaran.pandiyan@intel.com

drm/doc: Document feature merge deadlines

The discussion pretty much concluded without objections, let's
document what we agreed on.

Cc'ing linux-doc for the new tag in Documentation/process/index.rst.

Acked-by: Dave Airlie <airlied@gmail.com>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: linux-doc@vger.kernel.org
Cc: Dave Airlie <airlied@gmail.com>
Cc: Sean Paul <seanpaul@chromium.org>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Alex Deucher <alexdeucher@gmail.com>
Cc: Lukas Wunner <lukas@wunner.de>
Signed-off-by: Daniel Vetter <daniel.vetter@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321155228.30287-1-daniel.vetter@ffwll.ch

drm: Add mode_config .get_format_info() hook

Allow drivers to return a custom drm_format_info structure for special
fb layouts. We'll use this for the compression control surface in i915.

v2: Fix drm_get_format_info() kernel doc (Laurent)
    Don't pass 'dev' to the new hook (Laurent)
v3: s/compresssion/compression/ (Ben)

Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321181218.10042-4-ville.syrjala@linux.intel.com

drm: Remove fb hsub/vsub alignment requirement

Allow framebuffers dimesions to be misaligned w.r.t. the subsampling
factors. No real reason the core should have to enforce this, and
it definitely starts to cause us issues with the i915 CCS support.
So let's just lift the restriction.

Let's start to round up when computing the color plane dimesions
so that we'll not end up with too low an estimate for the memory
requirements and whatnot.

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321181218.10042-3-ville.syrjala@linux.intel.com
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>

drm: Share the code to compute color plane dimesions

framebuffer_check() has some hand rolled code to compute the color plane
dimensions based on the subsampled information. Let's share the code
between framebuffer_check() and drm_framebuffer_plane_{width,height}().

Cc: Ben Widawsky <ben@bwidawsk.net>
Cc: Jason Ekstrand <jason@jlekstrand.net>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/20170321181218.10042-2-ville.syrjala@linux.intel.com
Reviewed-by: Ben Widawsky <ben@bwidawsk.net>

drm: zte: remove leftover 'inf' from struct zx_hdmi

There is a leftover 'inf' field in struct zx_hdmi from commit
'831a8d5e0bef ("drm: zte: move struct vou_inf into zx_vou driver")'.
Remove it.

Signed-off-by: Shawn Guo <shawn.guo@linaro.org>
Reviewed-by: Sean Paul <seanpaul@chromium.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1490086795-17925-1-git-send-email-shawnguo@kernel.org

drm/edid: detect SCDC support in HF-VSDB

This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
  This structure will be used to save and indicate if sink
  supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
  reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
  in scdc structure
- If SCDC is present, checks if sink is capable of generating
  SCDC read request, and marks it in scdc structure.

V2: Addressed review comments
  Thierry:
  - Fix typos in commit message and make abbreviation consistent
    across the commit message.
  - Change structure object name from hdmi_info -> hdmi
  - Fix typos and abbreviations in description of structure drm_hdmi_info
    end the description with a full stop.
  - Create a structure drm_scdc, and keep all information related to SCDC
    register set (supported, read request supported) etc in it.

  Ville:
  - Change rr -> read_request
  - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
    of HF-VSDB parsing can be kept in same function, in incremental
    patches.

V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Addressed review comments from Ville
  - Add clock rate calculations for 1/10 and 1/40 ratios
  - Remove leftovers from old patchset
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.

Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-5-git-send-email-shashank.sharma@intel.com

drm/edid: detect SCDC support in HF-VSDB

This patch does following:
- Adds a new structure (drm_hdmi_info) in drm_display_info.
  This structure will be used to save and indicate if sink
  supports advanced HDMI 2.0 features
- Adds another structure drm_scdc within drm_hdmi_info, to
  reflect scdc support and capabilities in connected HDMI 2.0 sink.
- Checks the HF-VSDB block for presence of SCDC, and marks it
  in scdc structure
- If SCDC is present, checks if sink is capable of generating
  SCDC read request, and marks it in scdc structure.

V2: Addressed review comments
 Thierry:
 - Fix typos in commit message and make abbreviation consistent
   across the commit message.
 - Change structure object name from hdmi_info -> hdmi
 - Fix typos and abbreviations in description of structure drm_hdmi_info
   end the description with a full stop.
 - Create a structure drm_scdc, and keep all information related to SCDC
   register set (supported, read request supported) etc in it.

Ville:
 - Change rr -> read_request
 - Call drm_detect_scrambling function drm_parse_hf_vsdb so that all
   of HF-VSDB parsing can be kept in same function, in incremental
   patches.

V3: Rebase.
V4: Rebase.
V5: Rebase.
V6: Rebase.
V7: Added R-B from Jose.
V8: Rebase.
V9: Rebase.
V10: Rebase.

Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Thierry Reding <treding@nvidia.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-4-git-send-email-shashank.sharma@intel.com

drm/edid: check for HF-VSDB block

This patch implements a small function that finds if a
given CEA db is hdmi-forum vendor specific data block
or not.

V2: Rebase.
V3: Added R-B from Jose.
V4: Rebase
V5: Rebase
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-3-git-send-email-shashank.sharma@intel.com

drm: Add SCDC helpers

SCDC is a mechanism defined in the HDMI 2.0 specification that allows
the source and sink devices to communicate.

This commit introduces helpers to access the SCDC and provides the
symbolic names for the various registers defined in the specification.

V2: Rebase.
V3: Added R-B from Jose.
V4: Rebase
V5: Addressed review comments from Ville
 - Handle the I2c return values in a better way (dp_dual_mode)
 - Make the macros for SCDC Major/Minor more readable, by adding
   a 'GET' in the macro names
V6: Rebase
V7: Rebase
V8: Rebase
V9: Rebase
V10: Rebase

Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Shashank Sharma <shashank.sharma@intel.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: http://patchwork.freedesktop.org/patch/msgid/1489404244-16608-2-git-send-email-shashank.sharma@intel.com

drm: bridge: dw-hdmi: add HDMI vendor specific infoframe config

Vendor specific infoframe is mandatory for 4K2K resolution.
Without this, the HDMI protocol compliance fails.

Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Reviewed-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1490081777-2232-1-git-send-email-nickey.yang@rock-chips.com

drm/bridge: dw_hdmi: support i2c extended read mode

"I2C Master Interface Extended Read Mode" implements a segment
pointer-based read operation using the Special Register configuration.

This patch fix https://patchwork.kernel.org/patch/7098101/ mentioned
"The current implementation does not support "I2C Master Interface
Extended Read Mode" to read data addressed by non-zero segment
pointer, this means that if EDID has more than 1 extension blocks,
EDID reading operation won't succeed"

With this patch, dw-hdmi can read EDID data with 1/2/4 blocks.

Signed-off-by: Nickey Yang <nickey.yang@rock-chips.com>
Reviewed-by: Douglas Anderson <dianders@chromium.org>
Acked-by: Vladimir Zapolskiy <vladimir_zapolskiy@mentor.com>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Link: http://patchwork.freedesktop.org/patch/msgid/1489978651-16647-1-git-send-email-nickey.yang@rock-chips.com

drm/msm: add stubs for msm_{perf,rd}_debugfs_cleanup

We now call those two functions even when they are not defined
or declared anywhere because DEBUG_FS is disabled:

drivers/gpu/drm/msm/msm_drv.c: In function 'msm_drm_uninit':
drivers/gpu/drm/msm/msm_drv.c:244:2: error: implicit declaration of function 'msm_perf_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration]
drivers/gpu/drm/msm/msm_drv.c:245:2: error: implicit declaration of function 'msm_rd_debugfs_cleanup';did you mean 'msm_framebuffer_cleanup'? [-Werror=implicit-function-declaration]

This adds empty stub implementations for that case.

Fixes: 85eac4700ede ("drm/msm: Remove msm_debugfs_cleanup()")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: http://patchwork.freedesktop.org/patch/msgid/20170320093936.1255573-1-arnd@arndb.de

drm: bochs: Don't remove uninitialized fbdev framebuffer

In the same spirit of the fix for QXL in commit 861078381ba5 ("drm: qxl:
Don't alloc fbdev if emulation is not supported"), prevent the Oops in
the unbind path of Bochs if fbdev emulation is disabled.

[  112.176009] Oops: 0002 [#1] SMP
[  112.176009] Modules linked in: bochs_drm
[  112.176009] CPU: 0 PID: 3002 Comm: bash Not tainted 4.11.0-rc1+ #111
[  112.176009] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 1.9.3-20161025_171302-gandalf 04/01/2014
[  112.176009] task: ffff8800743bbac0 task.stack: ffffc90000b5c000
[  112.176009] RIP: 0010:mutex_lock+0x18/0x30
[  112.176009] RSP: 0018:ffffc90000b5fc78 EFLAGS: 00010246
[  112.176009] RAX: 0000000000000000 RBX: 0000000000000260 RCX: 0000000000000000
[  112.176009] RDX: ffff8800743bbac0 RSI: ffff8800787176e0 RDI: 0000000000000260
[  112.176009] RBP: ffffc90000b5fc80 R08: ffffffff00000000 R09: 00000000ffffffff
[  112.176009] R10: ffff88007b463650 R11: 0000000000000000 R12: 0000000000000260
[  112.176009] R13: ffff8800787176e0 R14: ffffffffa0003068 R15: 0000000000000060
[  112.176009] FS:  00007f20564c7b40(0000) GS:ffff88007ce00000(0000) knlGS:0000000000000000
[  112.176009] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[  112.176009] CR2: 0000000000000260 CR3: 000000006b89c000 CR4: 00000000000006f0
[  112.176009] Call Trace:
[  112.176009]  drm_mode_object_unregister+0x1e/0x50
[  112.176009]  drm_framebuffer_unregister_private+0x15/0x20
[  112.176009]  bochs_fbdev_fini+0x57/0x70 [bochs_drm]
[  112.176009]  bochs_unload+0x16/0x50 [bochs_drm]
[  112.176009]  drm_dev_unregister+0x37/0xd0
[  112.176009]  drm_put_dev+0x31/0x60
[  112.176009]  bochs_pci_remove+0x10/0x20 [bochs_drm]
[  112.176009]  pci_device_remove+0x34/0xb0
[  112.176009]  device_release_driver_internal+0x150/0x200
[  112.176009]  device_release_driver+0xd/0x10
[  112.176009]  unbind_store+0x108/0x150
[  112.176009]  drv_attr_store+0x20/0x30
[  112.176009]  sysfs_kf_write+0x32/0x40
[  112.176009]  kernfs_fop_write+0x10b/0x190
[  112.176009]  __vfs_write+0x23/0x120
[  112.176009]  ? security_file_permission+0x36/0xb0
[  112.176009]  ? rw_verify_area+0x49/0xb0
[  112.176009]  vfs_write+0xb0/0x190
[  112.176009]  SyS_write+0x41/0xa0
[  112.176009]  entry_SYSCALL_64_fastpath+0x1a/0xa9
[  112.176009] RIP: 0033:0x7f2055bd5620
[  112.176009] RSP: 002b:00007ffed2f487d8 EFLAGS: 00000246 ORIG_RAX: 0000000000000001
[  112.176009] RAX: ffffffffffffffda RBX: 0000000000000000 RCX: 00007f2055bd5620
[  112.176009] RDX: 000000000000000d RSI: 0000000000ee0008 RDI: 0000000000000001
[  112.176009] RBP: 0000000000000001 R08: 00007f2055e94760 R09: 00007f20564c7b40
[  112.176009] R10: 0000000000000073 R11: 0000000000000246 R12: 0000000000000000
[  112.176009] R13: 00007ffed2f48d70 R14: 0000000000000000 R15: 0000000000000000
[  112.176009] Code: 00 00 00 55 be 02 00 00 00 48 89 e5 e8 62 fb ff ff 5d c3 55 48 89 e5 53 48 89 fb e8 53 e9 ff ff 65 48 8b 14 25 40 c4 00 00 31 c0 <f0> 48 0f b1 13 48 85 c0 74 08 48 89 df e8c6 ff ff ff 5b 5d c3
[  112.176009] RIP: mutex_lock+0x18/0x30 RSP: ffffc90000b5fc78
[  112.176009] CR2: 0000000000000260
[  112.205622] ---[ end trace 76189cd7a9bdd155 ]---

Signed-off-by: Gabriel Krisman Bertazi <krisman@collabora.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317181409.4183-1-krisman@collabora.co.uk
Signed-off-by: Gerd Hoffmann <kraxel@redhat.com>

drm/i915: Update DRIVER_DATE to 20170320

Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>

Merge tag 'imx-drm-next-2017-03-17' of git://git.pengutronix.de/git/pza/linux into drm-next

imx-drm PRE/PRG support, deferred plane disabling, separate alpha support

- Initial support for the Prefetch Resolve Engine/Gasket on i.MX6QP,
  improving linear scanout buffer memory bandwidth utilization. This
  will in the future grow reordering support and allow direct scanout
  of Vivante tiled renderbuffers from the GPU.
- Deferred plane disabling gets rid of some busy waiting in the atomic
  plane disable and crtc disable paths that lead to wait_for_vblank
  timeouts.
- Add support for RGBA formats with a separate alpha plane, that can
  reduce memory bandwidth utilization for mostly transparent overlay
  planes by skipping color reads for completely transparent regions.
- Allow moving an active overlay plane without enforcing a modeset.
- Add 8-bit and 16-bit bayer formats to ipu_cpmem_set_image.
- Set the base address in ipu_cpmem_set_image even for invalid formats
  to increase robustness against errors.
- Use drm_plane_helper_check_state in plane atomic_check.
- Some cleanup.

* tag 'imx-drm-next-2017-03-17' of git://git.pengutronix.de/git/pza/linux: (22 commits)
  drm/imx: Remove unneeded definition for structure imx_drm_component
  drm/imx: use PRG/PRE when possible
  drm/imx: enable/disable PRG on CRTC enable/disable
  gpu: ipu-v3: only set non-zero AXI ID for IC when PRG is absent
  gpu: ipu-v3: hook up PRG unit
  gpu: ipu-v3: document valid IPUv3 compatibles and extend for i.MX6 QuadPlus
  gpu: ipu-v3: add driver for Prefetch Resolve Gasket
  gpu: ipu-v3: add DT binding for the Prefetch Resolve Gasket
  gpu: ipu-v3: add driver for Prefetch Resolve Engine
  gpu: ipu-v3: add DT binding for the Prefetch Resolve Engine
  drm/imx: ipuv3-plane: add support for separate alpha planes
  drm/imx: extend drm_plane_state_to_eba for separate channel support
  gpu: ipu-v3: add support for separate alpha channels
  drm: add RGB formats with separate alpha plane
  drm/imx: add deferred plane disabling
  drm/imx: don't wait for vblank and stop calling cleanup_planes in commit_tail
  gpu: ipu-v3: add unsynchronised DP channel disabling
  gpu: ipu-v3: remove IRQ dance on DC channel disable
  gpu: ipu-cpmem: add bayer formats to ipu_cpmem_set_image
  gpu: ipu-cpmem: set image base address even for incorrect formats
  ...

Linux 4.11-rc3

mm/swap: don't BUG_ON() due to uninitialized swap slot cache

This BUG_ON() triggered for me once at shutdown, and I don't see a
reason for the check.  The code correctly checks whether the swap slot
cache is usable or not, so an uninitialized swap slot cache is not
actually problematic afaik.

I've temporarily just switched the BUG_ON() to a WARN_ON_ONCE(), since
I'm not sure why that seemingly pointless check was there.  I suspect
the real fix is to just remove it entirely, but for now we'll warn about
it but not bring the machine down.

Cc: "Huang, Ying" <ying.huang@intel.com>
Cc: Tim Chen <tim.c.chen@linux.intel.com>
Cc: Michal Hocko <mhocko@suse.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge tag 'powerpc-4.11-5' of git://git./linux/kernel/git/powerpc/linux

Pull more powerpc fixes from Michael Ellerman:
 "A couple of minor powerpc fixes for 4.11:

   - wire up statx() syscall

   - don't print a warning on memory hotplug when HPT resizing isn't
     available

  Thanks to: David Gibson, Chandan Rajendra"

* tag 'powerpc-4.11-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
  powerpc/pseries: Don't give a warning when HPT resizing isn't available
  powerpc: Wire up statx() syscall

Merge branch 'parisc-4.11-2' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fixes from Helge Deller:

 - Mikulas Patocka added support for R_PARISC_SECREL32 relocations in
   modules with CONFIG_MODVERSIONS.

 - Dave Anglin optimized the cache flushing for vmap ranges.

 - Arvind Yadav provided a fix for a potential NULL pointer dereference
   in the parisc perf code (and some code cleanups).

 - I wired up the new statx system call, fixed some compiler warnings
   with the access_ok() macro and fixed shutdown code to really halt a
   system at shutdown instead of crashing & rebooting.

* 'parisc-4.11-2' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix system shutdown halt
  parisc: perf: Fix potential NULL pointer dereference
  parisc: Avoid compiler warnings with access_ok()
  parisc: Wire up statx system call
  parisc: Optimize flush_kernel_vmap_range and invalidate_kernel_vmap_range
  parisc: support R_PARISC_SECREL32 relocation in modules

Merge git://git./linux/kernel/git/nab/target-pending

Pull SCSI target fixes from Nicholas Bellinger:
 "The bulk of the changes are in qla2xxx target driver code to address
  various issues found during Cavium/QLogic's internal testing (stable
  CC's included), along with a few other stability and smaller
  miscellaneous improvements.

  There are also a couple of different patch sets from Mike Christie,
  which have been a result of his work to use target-core ALUA logic
  together with tcm-user backend driver.

  Finally, a patch to address some long standing issues with
  pass-through SCSI export of TYPE_TAPE + TYPE_MEDIUM_CHANGER devices,
  which will make folks using physical (or virtual) magnetic tape happy"

* git://git.kernel.org/pub/scm/linux/kernel/git/nab/target-pending: (28 commits)
  qla2xxx: Update driver version to 9.00.00.00-k
  qla2xxx: Fix delayed response to command for loop mode/direct connect.
  qla2xxx: Change scsi host lookup method.
  qla2xxx: Add DebugFS node to display Port Database
  qla2xxx: Use IOCB interface to submit non-critical MBX.
  qla2xxx: Add async new target notification
  qla2xxx: Export DIF stats via debugfs
  qla2xxx: Improve T10-DIF/PI handling in driver.
  qla2xxx: Allow relogin to proceed if remote login did not finish
  qla2xxx: Fix sess_lock & hardware_lock lock order problem.
  qla2xxx: Fix inadequate lock protection for ABTS.
  qla2xxx: Fix request queue corruption.
  qla2xxx: Fix memory leak for abts processing
  qla2xxx: Allow vref count to timeout on vport delete.
  tcmu: Convert cmd_time_out into backend device attribute
  tcmu: make cmd timeout configurable
  tcmu: add helper to check if dev was configured
  target: fix race during implicit transition work flushes
  target: allow userspace to set state to transitioning
  target: fix ALUA transition timeout handling
  ...

Merge branch 'libnvdimm-fixes' of git://git./linux/kernel/git/nvdimm/nvdimm

Pull device-dax fixes from Dan Williams:
 "The device-dax driver was not being careful to handle falling back to
  smaller fault-granularity sizes.

  The driver already fails fault attempts that are smaller than the
  device's alignment, but it also needs to handle the cases where a
  larger page mapping could be established. For simplicity of the
  immediate fix the implementation just signals VM_FAULT_FALLBACK until
  fault-size == device-alignment.

  One fix is for -stable to address pmd-to-pte fallback from the
  original implementation, another fix is for the new (introduced in
  4.11-rc1) pud-to-pmd regression, and a typo fix comes along for the
  ride.

  These have received a build success notification from the kbuild
  robot"

* 'libnvdimm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/nvdimm/nvdimm:
  device-dax: fix debug output typo
  device-dax: fix pud fault fallback handling
  device-dax: fix pmd/pte fault fallback handling

qla2xxx: Update driver version to 9.00.00.00-k

Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

qla2xxx: Fix delayed response to command for loop mode/direct connect.

Current driver wait for FW to be in the ready state before
processing in-coming commands. For Arbitrated Loop or
Point-to- Point (not switch), FW Ready state can take a while.
FW will transition to ready state after all Nports have been
logged in. In the mean time, certain initiators have completed
the login and starts IO. Driver needs to start processing all
queues if FW is already started.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

qla2xxx: Change scsi host lookup method.

For target mode, when new scsi command arrive, driver first performs
a look up of the SCSI Host. The current look up method is based on
the ALPA portion of the NPort ID. For Cisco switch, the ALPA can
not be used as the index. Instead, the new search method is based
on the full value of the Nport_ID via btree lib.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

qla2xxx: Add DebugFS node to display Port Database

Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Giridhar Malavali <giridhar.malavali@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

qla2xxx: Use IOCB interface to submit non-critical MBX.

The Mailbox interface is currently over subscribed. We like
to reserve the Mailbox interface for the chip managment and
link initialization. Any non essential Mailbox command will
be routed through the IOCB interface. The IOCB interface is
able to absorb more commands.

Following commands are being routed through IOCB interface

- Get ID List (007Ch)
- Get Port DB (0064h)
- Get Link Priv Stats (006Dh)

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

qla2xxx: Add async new target notification

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

qla2xxx: Export DIF stats via debugfs

Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

qla2xxx: Improve T10-DIF/PI handling in driver.

Add routines to support T10 DIF tag.

Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Anil Gurumurthy <anil.gurumurthy@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

qla2xxx: Allow relogin to proceed if remote login did not finish

If the remote port have started the login process, then the
PLOGI and PRLI should be back to back. Driver will allow
the remote port to complete the process. For the case where
the remote port decide to back off from sending PRLI, this
local port sets an expiration timer for the PRLI. Once the
expiration time passes, the relogin retry logic is allowed
to go through and perform login with the remote port.

Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

qla2xxx: Fix sess_lock & hardware_lock lock order problem.

The main lock that needs to be held for CMD or TMR submission
to upper layer is the sess_lock. The sess_lock is used to
serialize cmd submission and session deletion. The addition
of hardware_lock being held is not necessary. This patch removes
hardware_lock dependency from CMD/TMR submission.

Use hardware_lock only for error response in this case.

Path1
       CPU0                    CPU1
       ----                    ----
  lock(&(&ha->tgt.sess_lock)->rlock);
                               lock(&(&ha->hardware_lock)->rlock);
                               lock(&(&ha->tgt.sess_lock)->rlock);
  lock(&(&ha->hardware_lock)->rlock);

Path2/deadlock
*** DEADLOCK ***
Call Trace:
dump_stack+0x85/0xc2
print_circular_bug+0x1e3/0x250
__lock_acquire+0x1425/0x1620
lock_acquire+0xbf/0x210
_raw_spin_lock_irqsave+0x53/0x70
qlt_sess_work_fn+0x21d/0x480 [qla2xxx]
process_one_work+0x1f4/0x6e0

Cc: <stable@vger.kernel.org>
Cc: Bart Van Assche <Bart.VanAssche@sandisk.com>
Reported-by: Bart Van Assche <Bart.VanAssche@sandisk.com>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

qla2xxx: Fix inadequate lock protection for ABTS.

Normally, ABTS is sent to Target Core as Task MGMT command.
In the case of error, qla2xxx needs to send response, hardware_lock
is required to prevent request queue corruption.

Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

qla2xxx: Fix request queue corruption.

When FW notify driver or driver detects low FW resource,
driver tries to send out Busy SCSI Status to tell Initiator
side to back off. During the send process, the lock was not held.

Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@qlogic.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

qla2xxx: Fix memory leak for abts processing

Cc: <stable@vger.kernel.org>
Signed-off-by: Quinn Tran <quinn.tran@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

qla2xxx: Allow vref count to timeout on vport delete.

Cc: <stable@vger.kernel.org>
Signed-off-by: Joe Carnuccio <joe.carnuccio@cavium.com>
Signed-off-by: Himanshu Madhani <himanshu.madhani@cavium.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

tcmu: Convert cmd_time_out into backend device attribute

Instead of putting cmd_time_out under ../target/core/user_0/foo/control,
which has historically been used by parameters needed for initial
backend device configuration, go ahead and move cmd_time_out into
a backend device attribute.

In order to do this, tcmu_module_init() has been updated to create
a local struct configfs_attribute **tcmu_attrs, that is based upon
the existing passthrough_attrib_attrs along with the new cmd_time_out
attribute.  Once **tcm_attrs has been setup, go ahead and point
it at tcmu_ops->tb_dev_attrib_attrs so it's picked up by target-core.

Also following MNC's previous change, ->cmd_time_out is stored in
milliseconds but exposed via configfs in seconds.  Also, note this
patch restricts the modification of ->cmd_time_out to before +
after the TCMU device has been configured, but not while it has
active fabric exports.

Cc: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

tcmu: make cmd timeout configurable

A single daemon could implement multiple types of devices
using multuple types of real devices that may not support
restarting from crashes and/or handling tcmu timeouts. This
makes the cmd timeout configurable, so handlers that do not
support it can turn if off for now.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

tcmu: add helper to check if dev was configured

This adds a helper to check if the dev was configured. It
will be used in the next patch to prevent updates to some
config settings after the device has been setup.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

Merge tag 'openrisc-for-linus' of git://github.com/openrisc/linux

Pull OpenRISC fixes from Stafford Horne:
 "OpenRISC fixes for build issues that were exposed by kbuild robots
  after 4.11 merge. All from allmodconfig builds. This includes:

   - bug in the handling of 8-byte get_user() calls

   - module build failure due to multile missing symbol exports"

* tag 'openrisc-for-linus' of git://github.com/openrisc/linux:
  openrisc: Export symbols needed by modules
  openrisc: fix issue handling 8 byte get_user calls
  openrisc: xchg: fix `computed is not used` warning

target: fix race during implicit transition work flushes

This fixes the following races:

1. core_alua_do_transition_tg_pt could have read
tg_pt_gp_alua_access_state and gone into this if chunk:

if (!explicit &&
        atomic_read(&tg_pt_gp->tg_pt_gp_alua_access_state) ==
           ALUA_ACCESS_STATE_TRANSITION) {

and then core_alua_do_transition_tg_pt_work could update the
state. core_alua_do_transition_tg_pt would then only set
tg_pt_gp_alua_pending_state and the tg_pt_gp_alua_access_state would
not get updated with the second calls state.

2. core_alua_do_transition_tg_pt could be setting
tg_pt_gp_transition_complete while the tg_pt_gp_transition_work
is already completing. core_alua_do_transition_tg_pt then waits on the
completion that will never be called.

To handle these issues, we just call flush_work which will return when
core_alua_do_transition_tg_pt_work has completed so there is no need
to do the complete/wait. And, if core_alua_do_transition_tg_pt_work
was running, instead of trying to sneak in the state change, we just
schedule up another core_alua_do_transition_tg_pt_work call.

Note that this does not handle a possible race where there are multiple
threads call core_alua_do_transition_tg_pt at the same time. I think
we need a mutex in target_tg_pt_gp_alua_access_state_store.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

target: allow userspace to set state to transitioning

Userspace target_core_user handlers like tcmu-runner may want to set the
ALUA state to transitioning while it does implicit transitions. This
patch allows that state when set from configfs.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

target: fix ALUA transition timeout handling

The implicit transition time tells initiators the min time
to wait before timing out a transition. We currently schedule
the transition to occur in tg_pt_gp_implicit_trans_secs
seconds so there is no room for delays. If
core_alua_do_transition_tg_pt_work->core_alua_update_tpg_primary_metadata
needs to write out info to a remote file, then the initiator can
easily time out the operation.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

target: Use system workqueue for ALUA transitions

If tcmu-runner is processing a STPG and needs to change the kernel's
ALUA state then we cannot use the same work queue for task management
requests and ALUA transitions, because we could deadlock. The problem
occurs when a STPG times out before tcmu-runner is able to
call into target_tg_pt_gp_alua_access_state_store->
core_alua_do_port_transition -> core_alua_do_transition_tg_pt ->
queue_work. In this case, the tmr is on the work queue waiting for
the STPG to complete, but the STPG transition is now queued behind
the waiting tmr.

Note:
This bug will also be fixed by this patch:
http://www.spinics.net/lists/target-devel/msg14560.html
which switches the tmr code to use the system workqueues.

For both, I am not sure if we need a dedicated workqueue since
it is not a performance path and I do not think we need WQ_MEM_RECLAIM
to make forward progress to free up memory like the block layer does.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

target: fail ALUA transitions for pscsi

We do not setup the LU group for pscsi devices, so if you write
a state to alua_access_state that will cause a transition you will
get a NULL pointer dereference.

This patch will fail attempts to try and transition the path
for backend devices that set the TRANSPORT_FLAG_PASSTHROUGH_ALUA
flag.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

target: allow ALUA setup for some passthrough backends

This patch allows passthrough backends to use the core/base LIO
ALUA setup and state checks, but still handle the execution of
commands.

This will allow the target_core_user module to execute STPG and RTPG
in userspace, and not have to duplicate the ALUA state checks, path
information (needed so we can check if command is executable on
specific paths) and setup (rtslib sets/updates the configfs ALUA
interface like it does for iblock or file).

For STPG, the target_core_user userspace daemon, tcmu-runner will
still execute the STPG, and to update the core/base LIO state it
will use the existing configfs interface. For RTPG, tcmu-runner
will loop over configfs and/or cache the state.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

tcmu: return on first Opt parse failure

We only were returing failure if the last opt to be parsed failed.
This has a return failure when we first detect a failure.

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

tcmu: allow hw_max_sectors greater than 128

tcmu hard codes the hw_max_sectors to 128 which is a litle small.
Userspace uses the max_sectors to report the optimal IO size and
some initiators perform better with larger IOs (open-iscsi seems
to do better with 256 to 512 depending on the test).

(Fix do not display hw max sectors twice - MNC)

Signed-off-by: Mike Christie <mchristi@redhat.com>
Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

target: Drop pointless tfo->check_stop_free check

All in-tree fabric drivers provide a tfo->check_stop_free(),
so there is no need to do the extra check within existing
transport_cmd_check_stop_to_fabric() code.

Just to be sure, add a check in target_fabric_tf_ops_check()
to notify any out-of-tree drivers that might be missing it.

Signed-off-by: Nicholas Bellinger <nab@linux-iscsi.org>

parisc: Fix system shutdown halt

On those parisc machines which don't provide a software power off
function, the system currently kills the init process at the end of a
shutdown and unexpectedly restarts insteads of halting.
Fix it by adding a loop which will not return.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: stable@vger.kernel.org # 4.9+

parisc: perf: Fix potential NULL pointer dereference

Fix potential NULL pointer dereference and clean up
coding style errors (code indent, trailing whitespaces).

Signed-off-by: Arvind Yadav <arvind.yadav.cs@gmail.com>
Signed-off-by: Helge Deller <deller@gmx.de>

Merge branch 'smp-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull CPU hotplug fix from Thomas Gleixner:
 "A single fix preventing the concurrent execution of the CPU hotplug
  callback install/invocation machinery. Long standing bug caused by a
  massive brain slip of that Gleixner dude, which went unnoticed for
  almost a year"

* 'smp-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  cpu/hotplug: Serialize callback invocations proper

Merge tag 'pm-4.11-rc3' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management fixes from Rafael Wysocki:
 "These fix a few more intel_pstate issues and one small issue in the
  cpufreq core.

  Specifics:

   - Fix breakage in the intel_pstate's debugfs interface for PID
     controller tuning (Rafael Wysocki)

   - Fix computations related to P-state limits in intel_pstate to avoid
     excessive rounding errors leading to visible inaccuracies (Srinivas
     Pandruvada, Rafael Wysocki)

   - Add a missing newline to a message printed by one function in the
     cpufreq core and clean up that function (Rafael Wysocki)"

* tag 'pm-4.11-rc3' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  cpufreq: Fix and clean up show_cpuinfo_cur_freq()
  cpufreq: intel_pstate: Avoid percentages in limits-related computations
  cpufreq: intel_pstate: Correct frequency setting in the HWP mode
  cpufreq: intel_pstate: Update pid_params.sample_rate_ns in pid_param_set()

Merge branches 'pm-cpufreq-fixes' and 'intel_pstate-fixes'

* pm-cpufreq-fixes:
  cpufreq: Fix and clean up show_cpuinfo_cur_freq()

* intel_pstate-fixes:
  cpufreq: intel_pstate: Avoid percentages in limits-related computations
  cpufreq: intel_pstate: Correct frequency setting in the HWP mode
  cpufreq: intel_pstate: Update pid_params.sample_rate_ns in pid_param_set()

drm: vc4: remove redundant check of plane being non-null

The pointer plane is always null on the error path at label 'fail'
hence the check if it is non-null is redundant. We can therefore
remove the check and the destruction of plane as well as the fail
error path and instead just return an -ENOMEM ERR_PTR.

Detected by CoverityScan, CID#1339532 ("Logically Dead Code")

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170316185418.32765-1-colin.king@canonical.com

drm/vc4: use platform_register_drivers

Use platform_register_drivers instead of open coding the iteration over
component platform drivers in the vc4_drv module.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Reviewed-by: Eric Anholt <eric@anholt.net>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317170059.17821-1-p.zabel@pengutronix.de

drm/i915: Initialise i915_gem_object_create_from_data() directly

Use pagecache_write to avoid shmemfs clearing the pages prior to us
immediately overwriting them with our data.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317194648.12468-2-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: Correct error handling for i915_gem_object_create_from_data()

i915_gem_object_create_from_data() always returns an error pointer on
failure, there is no need to check against NULL.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317205317.7885-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

drm/i915: i915_gem_object_create_from_data() doesn't require struct_mutex

Both object creation and backing storage page allocation do not require
struct_mutex, so do not require the caller to take it.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: http://patchwork.freedesktop.org/patch/msgid/20170317194648.12468-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.auld@intel.com>

Merge tag 'nfs-for-4.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs

Pull NFS client fixes from Anna Schumaker:
 "We have a handful of stable fixes to fix kernel warnings and other
  bugs that have been around for a while. We've also found a few other
  reference counting bugs and memory leaks since the initial 4.11 pull.

  Stable Bugfixes:
   - Fix decrementing nrequests in NFS v4.2 COPY to fix kernel warnings
   - Prevent a double free in async nfs4_exchange_id()
   - Squelch a kbuild sparse complaint for xprtrdma

  Other Bugfixes:
   - Fix a typo (NFS_ATTR_FATTR_GROUP_NAME) that causes a memory leak
   - Fix a reference leak that causes kernel warnings
   - Make nfs4_cb_sv_ops static to fix a sparse warning
   - Respect a server's max size in CREATE_SESSION
   - Handle errors from nfs4_pnfs_ds_connect
   - Flexfiles layout shouldn't mark devices as unavailable"

* tag 'nfs-for-4.11-2' of git://git.linux-nfs.org/projects/anna/linux-nfs:
  pNFS/flexfiles: never nfs4_mark_deviceid_unavailable
  pNFS: return status from nfs4_pnfs_ds_connect
  NFSv4.1 respect server's max size in CREATE_SESSION
  NFS prevent double free in async nfs4_exchange_id
  nfs: make nfs4_cb_sv_ops static
  xprtrdma: Squelch kbuild sparse complaint
  NFS: fix the fault nrequests decreasing for nfs_inode COPY
  NFSv4: fix a reference leak caused WARNING messages
  nfs4: fix a typo of NFS_ATTR_FATTR_GROUP_NAME

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Thomas Gleixner:
 "An assorted pile of fixes along with some hardware enablement:

   - a fix for a KASAN / branch profiling related boot failure

   - some more fallout of the PUD rework

   - a fix for the Always Running Timer which is not initialized when
     the TSC frequency is known at boot time (via MSR/CPUID)

   - a resource leak fix for the RDT filesystem

   - another unwinder corner case fixup

   - removal of the warning for duplicate NMI handlers because there are
     legitimate cases where more than one handler can be registered at
     the last level

   - make a function static - found by sparse

   - a set of updates for the Intel MID platform which got delayed due
     to merge ordering constraints. It's hardware enablement for a non
     mainstream platform, so there is no risk"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/mpx: Make unnecessarily global function static
  x86/intel_rdt: Put group node in rdtgroup_kn_unlock
  x86/unwind: Fix last frame check for aligned function stacks
  mm, x86: Fix native_pud_clear build error
  x86/kasan: Fix boot with KASAN=y and PROFILE_ANNOTATED_BRANCHES=y
  x86/platform/intel-mid: Add power button support for Merrifield
  x86/platform/intel-mid: Use common power off sequence
  x86/platform: Remove warning message for duplicate NMI handlers
  x86/tsc: Fix ART for TSC_KNOWN_FREQ
  x86/platform/intel-mid: Correct MSI IRQ line for watchdog device