Carlo Caione [Mon, 15 Sep 2014 18:51:58 +0000 (20:51 +0200)]
ARM: DTS: meson: update DTSI to add watchdog node
Reviewed-by: Guenter Roeck <linux@roeck-us.net>
Signed-off-by: Carlo Caione <carlo@caione.org>
Arnd Bergmann [Thu, 2 Oct 2014 15:08:24 +0000 (17:08 +0200)]
Merge tag 'mvebu-dt-3.18-2' of git://git.infradead.org/linux-mvebu into next/dt
Pull "mvebu DT changes for v3.18 (round 2)" from Jason Cooper:
- Armada XP
- Add HW datasheet references to docs
- Armada 370
- Change internal registers to 0xf1000000 for Armada 370 RD board
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'mvebu-dt-3.18-2' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: switch the Armada 370 RD board to internal registers at 0xf1000000
Documentation: arm: add hardware datasheet reference for Marvell Armada XP
Arnd Bergmann [Thu, 2 Oct 2014 14:47:40 +0000 (16:47 +0200)]
Merge tag 'keystone-dts-fixes' of git://git./linux/kernel/git/ssantosh/linux-keystone into next/dt
Pull "Few keystone DTS fixes for 3.18" from Santosh Shilimkar:
- IO range fix for USB phy device
- Add missing dma-coherent property for K2E USB node
- Fix K2L MDIO start address
- Fix K2E MDIO start address
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'keystone-dts-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone-k2l: fix mdio io start address
ARM: dts: keystone-k2e: fix mdio io start address
ARM: dts: keystone-k2e: update usb1 node for dma properties
ARM: dts: keystone: fix io range for usb_phy0
Grygorii Strashko [Wed, 1 Oct 2014 13:59:33 +0000 (09:59 -0400)]
ARM: dts: keystone-k2l: fix mdio io start address
The K2L MDIO io space has different start address.
Hence, fix it to be 0x26200f00 according to TRM.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Grygorii Strashko [Wed, 1 Oct 2014 13:58:25 +0000 (09:58 -0400)]
ARM: dts: keystone-k2e: fix mdio io start address
The K2E MDIO io space has different start address.
Hence, fix it to be 0x24200f00 according to TRM.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Grygorii Strashko [Wed, 1 Oct 2014 13:58:25 +0000 (09:58 -0400)]
ARM: dts: keystone-k2e: update usb1 node for dma properties
Keystone supports dma-coherent on USB master and also needs
dma-ranges to specify the hardware alias memory range in which DMA
can be operational.
Such configuration applied for USB0 devices, but It's missed for
USB1 device which is present only in K2E SoC - hence apply it.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Grygorii Strashko [Wed, 1 Oct 2014 13:58:25 +0000 (09:58 -0400)]
ARM: dts: keystone: fix io range for usb_phy0
The IO range size is set incorrectly for USB PHY0 deivice
it should be 24 instead of 32. Otherwise, It causes
USB PHY1 probing failure.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Arnd Bergmann [Fri, 26 Sep 2014 12:15:54 +0000 (14:15 +0200)]
Revert "Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt"
Apparently most of the newly added nodes had the same problem,
so instead of reverting the individual patches, this undoes
the effect of the merge and backs out all of them at once.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Olof Johansson [Fri, 26 Sep 2014 00:41:19 +0000 (17:41 -0700)]
Revert "ARM: dts: hix5hd2: add wdg node"
This reverts commit
610bd8722ef40b649b51f01045c5d1903f41b583.
"ARM: dts: hix5hd2: add wdg node" causes a build breakage due to
an undefined constatns:
Error: arch/arm/boot/dts/hisi-x5hd2.dtsi:374.22-23 syntax error
(Don't you just looove the dtc error messages? They are so informative!)
Signed-off-by: Olof Johansson <olof@lixom.net>
Arnd Bergmann [Thu, 25 Sep 2014 22:51:53 +0000 (00:51 +0200)]
Merge tag 'samsung-dt' of git://git./linux/kernel/git/kgene/linux-samsung into next/dt
Pull "Samsung DT update for 3.18" from Kukjin Kim:
- un-use slot-node and deprecate the supports-highspped
for dw-mmc
- remove old USB2 PHY node for exynos5250
- exynos4412-odroid-common
enable PMIC interrupt and i2c improvements
- exynos5250-snow
fold exynos5250-cros-common
update display related nodes
- Peach Pit and Pi
improve power scheme, add support max77802 PMIC,
add hdmi regulators add thermistor, ISL29018 sensor,
set i2c clock at 400kHz, add support Atmel touchpad,
update display related nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'samsung-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
ARM: dts: remove old USB2 PHY node for exynos5250
ARM: dts: remove old USB2 PHY node hook for exynos5250-arndale
ARM: dts: update display related nodes for exynos5800-peach-pi
ARM: dts: update display related nodes for exynos5420-peach-pit
ARM: dts: update display related nodes for exynos5250-snow
ARM: dts: Add support Atmel touchpad for exynos5800-peach-pi
ARM: dts: Add support Atmel touchpad for exynos5420-peach-pit
ARM: dts: Set i2c7 clock at 400kHz for exynos based Peach boards
ARM: dts: Add ISL29018 sensor for exynos based Peach boards
ARM: dts: Add thermistor dts fragment used by exynos based Peach boards
ARM: dts: add hdmi regulators for exynos5420-peach-pit
ARM: dts: add hdmi regulators for exynos5800-peach-pi
ARM: dts: Add support max77802 PMIC for exynos based Peach boards
ARM: dts: Improve Peach Pit and Pi power scheme
ARM: dts: unuse the slot-node and deprecate the supports-highspeed for dw-mmc in exynos
ARM: dts: Fold exynos5250-cros-common into exynos5250-snow
ARM: dts: Fix MMC pinctrl for exynos5250-snow
ARM: dts: ODROID i2c improvements for exynos4412-odroid-common
ARM: dts: Enable PMIC interrupts for exynos4412-odroid-common
Arnd Bergmann [Thu, 25 Sep 2014 22:40:43 +0000 (00:40 +0200)]
Merge tag 'keystone-dts' of git://git./linux/kernel/git/ssantosh/linux-keystone into next/dt
Pull "Keystone DTS updates for v3.18" from Santosh Shilimkar"
- Add IRQ and GPIO nodes
- Fix SPI chip select
- Fix usb and pcie clock nodes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'keystone-dts' of git://git.kernel.org/pub/scm/linux/kernel/git/ssantosh/linux-keystone:
ARM: dts: keystone: fix bindings for pcie and usb clock nodes
ARM: dts: keystone: k2l: Fix chip selects for SPI devices
ARM: dts: keystone: add dsp gpio controllers nodes
ARM: dts: keystone: add keystone irq controller node
Jianqun [Fri, 12 Sep 2014 10:54:55 +0000 (18:54 +0800)]
ARM: dts: add rk3288 i2s controller
Add dt for rk3288 i2s controller, since i2s clock pins and data pins
default to be GPIO, this patch also add pinctrl to mux them.
Tested on RK3288 board.
Signed-off-by: Jianqun Xu <jay.xu@rock-chips.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 25 Sep 2014 22:08:06 +0000 (00:08 +0200)]
Merge tag 'dt-part2-v2-for-v3.18' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Pull "part 2 of omap dts changes" from Tony Lindgren:
Changes to add dra7 PMU, display support for cm-t54, misc
changes needed for omap3 boards for device tree support.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'dt-part2-v2-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
ARM: dts: DRA7: Add PMU nodes
ARM: dts: cm-t54: setup omap_dwc3
ARM: dts: cm-t54: add ADS7846 touchscreen support
ARM: dts: cm-t54: add Startek LCD support
ARM: dts: cm-t54: add HDMI/DVI display data
ARM: dts: cm-t54: fix mux mode comment style
ARM: dts: sbc-t54: fix mux mode comment style
ARM: dts: Enable PMIC idle configuration for LDP
ARM: dts: Add support for Ethernet on some N900 macro boards
ARM: dts: Do not set pulls for I2C lines
ARM: dts: omap: Remove WAKEUPENABLE mux options for UARTs
ARM: dts: omap3-overo: Fix UART wake-up events
Pawel Moll [Thu, 18 Sep 2014 09:23:06 +0000 (10:23 +0100)]
ARM: vexpress: Add CLCD Device Tree properties
... for V2M-P1 motherboard CLCD (limited to 640x480 16bpp and using
dedicated video RAM bank) and for V2P-CA9 (up to 1024x768 16bpp).
Signed-off-by: Pawel Moll <pawel.moll@arm.com>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Mark Brown [Wed, 17 Sep 2014 01:51:36 +0000 (19:51 -0600)]
ARM: bcm2835: add I2S pinctrl to device tree
Signed-off-by: Florian Meier <florian.meier@koalo.de>
[Tweaked slightly to disable by default -- broonie]
Signed-off-by: Mark Brown <broonie@linaro.org>
[swarren, removed duplicate i2s node]
Signed-off-by: Stephen Warren <swarren@wwwdotorg.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Arnd Bergmann [Thu, 25 Sep 2014 21:21:09 +0000 (23:21 +0200)]
Merge tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi into next/dt
Pull "ARM: DT: Hisilicon terminal SoC HiX5HD2 DT updates for 3.18" from Wei Xu:
- Add watchdog, gpio, sata, usb, mmc and gmac nodes in HiX5HD2 SoC DT
- Enable sata and gmac in HiX5HD2 dkb board DT
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'hix5hd2-dt-for-3.18' of git://github.com/hisilicon/linux-hisi:
ARM: dts: hix5hd2: add wdg node
ARM: dts: hix5hd2: add gpio node
ARM: dts: hix5hd2: add sata node
ARM: dts: hix5hd2: add usb node
ARM: dts: hix5hd2: add mmc node
ARM: dts: hix5hd2: add gmac node
Arnd Bergmann [Thu, 25 Sep 2014 16:13:49 +0000 (18:13 +0200)]
Merge tag 'sunxi-dt-for-3.18' of git://git./linux/kernel/git/mripard/linux into next/dt
Pull "Allwinner DT Additions for 3.18" from Maxime Ripard:
Mostly:
- A23 bringup ongoing
- New boards: HSG H702, Merrii A20 Hummingbird
- sun(4|5|7)i DMA support
- DT relicensing to a dual GPL/X11 license
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'sunxi-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/mripard/linux: (30 commits)
ARM: dts: sun8i: Add DMA controller node
ARM: dts: sun5i: Add DT for HSG H702 tablet board
ARM: dts: sunxi: Add fixed 5V regulator
ARM: sun8i: Relicense the A23 DTSI under GPLv2/X11
ARM: sun7i: Relicense the A20 DTSI under GPLv2/X11
ARM: sun6i: Relicense the A31 DTSI under GPLv2/X11
ARM: sun7i: Add support for Olimex A20-OLinuXino-LIME
ARM: dts: sun7i: Add Merrii A20 Hummingbird board
ARM: dts: sun7i: Add uart3/4/5, i2c3 and spi2 pinmux
ARM: dt: sunxi: Remove i2c controller clock-frequency that matches default
ARM: dts: sun8i: Enable i2c controllers on ippo-q8h-v5
ARM: dts: sun8i: Add i2c controller nodes
ARM: dts: sun8i: Add pin-muxing info for the i2c controllers
ARM: dts: sun8i: Enable mmc controller on ippo-q8h-v5
ARM: dts: sun8i: Add mmc controller nodes
ARM: dts: sun8i: Add pin-muxing info for the mmc controllers
ARM: dts: sun8i: Add mmc clocks to the dtsi
ARM: dts: sun8i: ippo-q8h: Add pinctrl properties for R_UART
ARM: dts: sun8i: Add pin muxing option for R_UART
ARM: dts: sun8i: Add pinmux set for uart0
...
Arnd Bergmann [Thu, 25 Sep 2014 16:08:56 +0000 (18:08 +0200)]
Merge tag 'renesas-dt5-for-v3.18' of git://git./linux/kernel/git/horms/renesas into next/dt
Pull "Fifth Round of Renesas ARM Based SoC DT Updates for v3.18" from Simon Horman:
* Document manufacturer for KZM boards
* Use SoC-specific irqc compatible property
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'renesas-dt5-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/horms/renesas:
ARM: shmobile: Add manufacturer for KZM boards
ARM: shmobile: r8a73a4 dtsi: Add SoC-specific irqc compatible property
Arnd Bergmann [Thu, 25 Sep 2014 16:02:30 +0000 (18:02 +0200)]
Merge tag 'pxa-fix-abi' of https://git./linux/kernel/git/hzhuang1/linux into next/dt
Pull "pxa2xx DT changes" from Haojian Zhuang:
Since DT aren't fully enabled in pxa2xx, it's fine to merge them in v3.18
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'pxa-fix-abi' of https://git.kernel.org/pub/scm/linux/kernel/git/hzhuang1/linux:
ARM: pxa: dts: fix ohci controller compatible string
ARM: pxa: dts: fix mmc controller compatible string
Arnd Bergmann [Thu, 25 Sep 2014 15:54:32 +0000 (17:54 +0200)]
Merge tag 'tegra-for-3.18-dt' of git://git./linux/kernel/git/swarren/linux-tegra into next/dt
Pull "ARM: tegra: device tree changes for 3.18" from Stephen Warren:
The main highlights are:
* SATA and PCIe support added to Tegra124, and enabled on Jetson TK1.
* Touchpad enabled on Venice2 (although the driver still has a few issues
to be worked out).
* NVIDIA reference boards rely on the bootloader to program the pinmux.
* Support added for the Acer Chromebook 13 (CB5).
* DT nodes added for the Tegra flow controller HW module. This will
help reduce use of iomap.h in a future code cleanup.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'tegra-for-3.18-dt' of git://git.kernel.org/pub/scm/linux/kernel/git/swarren/linux-tegra:
ARM: tegra: enable PCIe in Jetson TK1 DT
ARM: tegra: add PCIe to Tegra124 DT
ARM: tegra: rely on bootloader pinmux programming on Tegra124
ARM: tegra: add Acer Chromebook 13 device tree
ARM: tegra: Move pwm and dpaux labels to tegra124.dtsi
ARM: tegra: add touchpad to Venice2 DT
ARM: tegra: Add device tree nodes for flow controller
ARM: tegra: add PCIe-related pins to the Jetson TK1 pinmux tables
ARM: tegra: Add SATA and SATA power to Jetson TK1 device tree
ARM: tegra: Add SATA controller to Tegra124 device tree
Arnd Bergmann [Thu, 25 Sep 2014 15:50:36 +0000 (17:50 +0200)]
Merge tag 'at91-dt3' of git://github.com/at91linux/linux-at91 into next/dt
Pull "More AT91 DT material for 3.18" from Nicolas Ferre:
- specify DMA channels for USART on sama5d3 and choose peripherals
that will use them on the EK boards
- SSC update for audio on at91sam9rl and at91sam9g20
- addition of the NFC clock and new pinctrl compatible string
to use enhancements that will land in drivers during this release
- several new nodes and fixes
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'at91-dt3' of git://github.com/at91linux/linux-at91:
ARM: at91/dt: at91sam9m10g45ek add rtc node
ARM: at91/dt: sama5d3: use new pinctrl compatible string
ARM: at91/dt: sama5d3: add the nfc clock
ARM: at91/dt: declare sckc node on at91sam9g45
ARM: at91/dt: Fix typo regarding can0_clk
ARM: at91/dt: at91sam9g20: switch ssc compatible string
ARM: at91/dt: at91sam9rl: switch ssc compatible string
ARM: at91: sama5d3xek: reserve dma channel for audio
ARM: at91: sama5d3: add usart dma configurations
Arnd Bergmann [Thu, 25 Sep 2014 15:47:26 +0000 (17:47 +0200)]
Merge tag 'zynq-dt-for-3.18' of git://git.xilinx.com/linux-xlnx into next/dt
Pull "arm: Xilinx Zynq dt patches for v3.18" from Michal Simek:
- Add eth phys
- Add led for zc702
- Various dts cleanups
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
* tag 'zynq-dt-for-3.18' of git://git.xilinx.com/linux-xlnx:
ARM: zynq: Add ISL9305 regulator on Parallella board
ARM: zynq: DT: Add Ethernet phys
ARM: zynq: DT: Fix coding style issues in dtsi
ARM: zynq: DT: Describe interrupt-names for pl330
ARM: zynq: DT: Extend compatible string for zedboard
ARM: zynq: DT: Use 0x prefix for memory nodes
ARM: zynq: DT: Update years in header
ARM: zynq: DT: Move size/address properties to dtsi
ARM: zynq: DT: Fix Ethernet phy modes
ARM: zynq: DT: Add LEDs to zc702 DT
Carlo Caione [Wed, 10 Sep 2014 20:17:19 +0000 (22:17 +0200)]
ARM: meson: documentation: add bindings documentation
Add vendor prefixes and basic documentation for MesonX SoCs bindings
Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Carlo Caione [Tue, 9 Sep 2014 20:12:56 +0000 (22:12 +0200)]
ARM: meson: dts: add basic Meson/Meson6/Meson6-atv1200 DTSI/DTS
The Meson6 SoC is produced by Amlogic inc. and it is based on 2 Cortex
A9 and an ARM Mali-400 GPU.
This patch adds two basic DTSI for the preliminary support of Meson and
Meson6 SoCs. Another DTS is also added for supporting the atv1200 board,
produced by Geniatech inc.
Signed-off-by: Carlo Caione <carlo@caione.org>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Olof Johansson [Wed, 24 Sep 2014 18:29:31 +0000 (11:29 -0700)]
Merge tag 'imx-dt-3.18' of git://git./linux/kernel/git/shawnguo/linux into next/dt
Merge "ARM: imx: device tree changes for 3.18" from Shawn Guo:
The i.MX device tree changes for 3.18:
- Device tree support for i.MX ADS and Armadeus APF9328 boards
- Enable thermal sensor support for i.MX6SL
- Add LCD support for i.MX6SL EVK board
- Fix display duplicate name for a bunch of board dts files
- Configure imx6qdl-sabresd board pins locally to remove the dependency
on bootloader
- A set of imx28-tx28 board dts updates from Lothar
- Add pci config space as platform resource
- Enable devices RTC, I2C and HDMI for nitrogen6x board
- Split HummingBoard DT to support s/dl and d/q
- mSATA and IR input support for HummingBoard
- Add SSI baud clock for i.MX6 device trees
- Add USB support for vf610-colibri and vf610-twr boards
- A set of cleanup and updates on Gateworks boards
* tag 'imx-dt-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/shawnguo/linux: (86 commits)
ARM: dts: imx6: make gpt per clock can be from OSC
ARM: dts: imx: ventana: add canbus support for GW52xx
ARM: dts: imx: ventana: cleanup pinctrl groups
ARM: dts: imx: ventana: configure padconf for all pins
ARM: dts: imx: ventana: use gpio constants
ARM: dts: imx: ventana: remove unused aliases
ARM: dts: imx: ventana: remove unsupported dt nodes
ARM: dts: imx28-tx28: add alias for CAN XCVR regulator
ARM: dts: imx28-tx28: add spi-gpio as alternative for spi-mxs
ARM: dts: imx28-tx28: use GPIO flags
ARM: dts: imx28-tx28: remove spidev labels and add third instance of spidev
ARM: dts: imx6sl: add baud clock and clock-names for ssi
ARM: dts: imx6qdl: add baud clock and clock-names for ssi
ARM: dts: imx6qdl-sabresd: Configure the pins locally
ARM: dts: imx28-m28evk: Fix display duplicate name warning
ARM: dts: imx28-tx28: Fix display duplicate name warning
ARM: dts: imx28-m28cu: Fix display duplicate name warning
ARM: dts: imx28-cfa100: Fix display duplicate name warning
ARM: dts: imx28-apf28dev: Fix display duplicate name warning
ARM: dts: imx28-apx4devkit: Fix display duplicate name warning
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Matthias Brugger [Mon, 18 Aug 2014 14:58:00 +0000 (16:58 +0200)]
ARM: dts: mt6589: Change compatible string for GIC
This patch changes the compatible string of the GIC to the
new "arm,cortex-a7-gic" which does reflect the actual hardware.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Matthias Brugger [Mon, 18 Aug 2014 14:58:00 +0000 (16:58 +0200)]
ARM: dts: mediatek: Add compatible property for aquaris5
Add the missing 'compatible' property to device tree root node of
- mt6589-aquaris5.dts
and document the new values.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Matthias Brugger [Mon, 18 Aug 2014 14:58:00 +0000 (16:58 +0200)]
ARM: dts: mt6589-aquaris5: Add boot argument earlyprintk
Add boot argument for earlyprintk to the aquaris5 device tree file.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Matthias Brugger [Mon, 18 Aug 2014 14:58:00 +0000 (16:58 +0200)]
ARM: dts: mt6589: Fix typo in GIC unit address
This changes the unit address of the gic node to it's first register area.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Matthias Brugger [Mon, 18 Aug 2014 14:58:00 +0000 (16:58 +0200)]
ARM: dts: Build dtb for Mediatek board
This allows the "make dtbs" to build the aquaris5 dtb for the Mediatek
SoC.
Signed-off-by: Matthias Brugger <matthias.bgg@gmail.com>
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 24 Sep 2014 17:38:57 +0000 (10:38 -0700)]
Merge tag 'mvebu-dt-3.18' of git://git.infradead.org/linux-mvebu into next/dt
Merge "ARM: mvebu: DT changes for v3.18" from Jason Cooper:
mvebu DT changes for v3.18
- Armada 375
- Add RTC support
- Armada 370
- Add proper pinmuxing
- Add SSCG
- Add gpio-fan
- Add LED support
- change Intersil vendor prefix to isil
- use improved Armada SPI compatible string
* tag 'mvebu-dt-3.18' of git://git.infradead.org/linux-mvebu:
ARM: mvebu: add user LED support of Armada 370 RD
ARM: mvebu: add gpio fan support to Armada 370 RD
ARM: mvebu: Change vendor prefix for Intersil Corporation to isil
ARM: mvebu: use improved armada spi device tree compatible name
ARM: mvebu: add SSCG to Armada 370 Device Tree
ARM: mvebu: Add proper pin muxing on Armada 370 RD board
ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 104
ARM: mvebu: Add proper pin muxing on Netgear ReadyNAS 102
ARM: mvebu: Add proper pin muxing on the Armada 370 DB board
ARM: mvebu: Add proper pin muxing on Globalscale Mirabox board
ARM: mvebu: Add network pin mux configuration for the Armada 370 SoC
ARM: mvebu: Add RTC support for Armada 375
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 24 Sep 2014 05:27:38 +0000 (22:27 -0700)]
Merge tag 'v3.18-rockchip-dts2-v2' of git://git./linux/kernel/git/mmind/linux-rockchip into next/dt
Merge "second bunch of dts changes for 3.18" from Heiko Stubner:
More peripheral support for Rockchip SoCs
- dwc2 usb controllers
- spi controllers
- emmc controller
* tag 'v3.18-rockchip-dts2-v2' of git://git.kernel.org/pub/scm/linux/kernel/git/mmind/linux-rockchip:
ARM: dts: rockchip: Remove "regulator-always-on" in vcc_rmii for Radxa Rock
ARM: dts: rockchip: fix rk3188 emmc pull references
ARM: dts: rockchip: fix swapped Radxa Rock pinctrl references
ARM: dts: rockchip: clean up rk3xxx mmc nodes
ARM: dts: rockchip: add emmc nodes for rk3066 and rk3188
ARM: dts: rockchip: add Cortex-A9 SPI controller nodes
ARM: dts: rockchip: enable usb ports on Radxa Rock
ARM: dts: rockchip: add dwc2 controllers for rk3066 and rk3188
ARM: dts: rockchip: remove rockchip,bus-index from rk3xxx i2c0
ARM: dts: Switch i2c0 to 400kHz on rk3288-evb-rk808
ARM: dts: Add rk808 PMIC to rk3288-evb-rk808
ARM: dts: Add mshc aliases for rk3288
ARM: dts: Add SPI nodes to rk3288
ARM: dts: Enable USB host1(dwc) on rk3288-evb
ARM: dts: add rk3288 dwc2 controller support
ARM: dts: Add sdio0 and sdio1 to the rk3288
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 24 Sep 2014 05:26:19 +0000 (22:26 -0700)]
Merge tag 'qcom-dt-for-3.18-2' of git://git./linux/kernel/git/galak/linux-qcom into next/dt
Merge "qcom DT changes for v3.18-2" from Kumar Gala:
Qualcomm ARM Based Device Tree Updates for v3.18-2
* Added SDCC nodes on MSM8960/CDP and MSM8660/SURF
* Added I2C and SDCC4/WLAN on APQ8064/IFC6410
* Added I2C on MSM8984/DB8074
* tag 'qcom-dt-for-3.18-2' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
ARM: DT: msm8960: Add sdcc nodes
ARM: DT: msm8660: Add sdcc nodes
ARM: DT: apq8064: Add i2c device nodes
ARM: DT: apq8064: add support to sdcc4 for wlan.
ARM: dts: qcom: Add I2C dt node for MSM8974 and DB8074 board
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 24 Sep 2014 05:25:39 +0000 (22:25 -0700)]
Merge tag 'qcom-dt-for-3.18' of git://git./linux/kernel/git/galak/linux-qcom into next/dt
Merge "qcom DT changes for v3.18" from Kumar Gala:
Qualcomm ARM Based Device Tree Updates for v3.18
* Added APQ8084 dt support for clocks, serial, pinctrl, and IFC6540 board
* Added IPQ8064 dt support for basic SoC and AP148 board
* Added APQ8064 dt support for pinctrl, reset, SDHC, and multimedia clocks
* Added PMIC 8058 dt support on MSM8660, enables PMIC based power key,
keypad, rtc, and vibrator
* Added PMIC 8921 dt support on MSM8960, enables PMIC based power key,
keypad, and rtc
* tag 'qcom-dt-for-3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/galak/linux-qcom:
ARM: DT: QCOM: apq8064: Add dma support for sdcc node
ARM: DT: apq8064: Add sdcc support via mcci driver.
ARM: dts: qcom: Add 8064 multimedia clock controller node
ARM: DT: APQ8064: Add node for ps_hold function in pinctrl
ARM: DT: APQ8064: Add pinctrl support
ARM: dts: qcom: Add TLMM DT node for APQ8084
ARM: dts: qcom: Add initial IFC6540 board device tree
ARM: dts: msm: Add 8058 PMIC to ssbi bus
ARM: dts: msm: Add 8921 PMIC to ssbi bus
ARM: qcom: Add initial IPQ8064 SoC and AP148 device trees
ARM: dts: qcom: Add APQ8084 serial port DT node
ARM: dts: qcom: Add APQ8084 Global Clock Controller DT node
Signed-off-by: Olof Johansson <olof@lixom.net>
Olof Johansson [Wed, 24 Sep 2014 05:11:05 +0000 (22:11 -0700)]
Merge tag 'dt-for-v3.18' of git://git./linux/kernel/git/tmlind/linux-omap into next/dt
Merge "omap dts changes for v3.18 merge window" from Tony Lindgren:
Changes for .dts files for omaps for v3.18 merge window:
- Updates for gta04 to add gta04a3 model
- Add support for Tehnexion TAO3530 boards
- Regulator names for beaglebone
- Pinctrl related updates for omap5, dra7 and am437
- Model name fix for sbc-t54
- Enable mailbox for various omaps
* tag 'dt-for-v3.18' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap: (291 commits)
ARM: dts: OMAP2+: Add sub mailboxes device node information
ARM: dts: dra7-evm: Mark uart1 rxd as wakeup capable
ARM: dts: OMAP5 / DRA7: switch over to interrupts-extended property for UART
ARM: dts: AM437x: switch to compatible pinctrl
ARM: dts: DRA7: switch to compatible pinctrl
ARM: dts: OMAP5: switch to compatible pinctrl
ARM: dts: am335x-boneblack: Add names for remaining regulators
ARM: dts: sbc-t54: fix model property
ARM: dts: omap5.dtsi: add DSS RFBI node
ARM: dts: omap3: Add HEAD acoustics omap3-ha.dts and omap3-ha-lcd.dts (TAO3530 based)
ARM: dts: omap3: Add Technexion Thunder support (TAO3530 SOM based)
ARM: dts: omap3: Add Technexion TAO3530 SOM omap3-tao3530.dtsi
ARM: OMAP2+: tao3530: Add pdata-quirk for the mmc2 internal clock
ARM: OMAP2+: board-generic: add support for AM57xx family
ARM: dts: dra72-evm: Add tps65917 PMIC node
ARM: dts: dra72-evm: Enable I2C1 node
Linux 3.17-rc3
unicore32: Fix build error
vexpress/spc: fix a build warning on array bounds
spi: sh-msiof: Fix transmit-only DMA transfers
...
Signed-off-by: Olof Johansson <olof@lixom.net>
Karicheri, Muralidharan [Mon, 22 Sep 2014 19:19:28 +0000 (15:19 -0400)]
ARM: dts: keystone: fix bindings for pcie and usb clock nodes
Fix incorrect clock names for usb1, pcie1 and domain register
offset for pcie1 clock nodes on K2E EVM
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Karicheri Muralidharan [Mon, 22 Sep 2014 19:19:27 +0000 (15:19 -0400)]
ARM: dts: keystone: k2l: Fix chip selects for SPI devices
There are 5 chip selects per SPI0 and SPI2 and 3 per SPI1. SPI2 needs
to be pinned out to use and by default they are disabled. So keep the
state disabled to reflect default.
Signed-off-by: Murali Karicheri <m-karicheri2@ti.com>
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Grygorii Strashko [Mon, 22 Sep 2014 19:19:27 +0000 (15:19 -0400)]
ARM: dts: keystone: add dsp gpio controllers nodes
Add Keystone 2 DSP GPIO nodes for SoCs:
k2hk:
DSP GPIO banks 0-7 correspond to DSP0-DSP7
k2l:
DSP GPIO banks 0-3 correspond to DSP0-DSP3
k2e:
DSP GPIO bank 0 corresponds to DSP0
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Grygorii Strashko [Mon, 22 Sep 2014 19:19:27 +0000 (15:19 -0400)]
ARM: dts: keystone: add keystone irq controller node
Add Keystone IRQ controller IP node which allows ARM
CorePac core to receive signals from DSP cores.
Signed-off-by: Grygorii Strashko <grygorii.strashko@ti.com>
Signed-off-by: Santosh Shilimkar <santosh.shilimkar@ti.com>
Stephen Boyd [Fri, 19 Sep 2014 23:50:51 +0000 (16:50 -0700)]
ARM: DT: msm8960: Add sdcc nodes
Add the sdcc nodes to support the SD card controller using pl180
mmci driver. We also add a temporary fixed regulator until the
regulator driver is mainlined.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Stephen Boyd [Fri, 19 Sep 2014 23:50:50 +0000 (16:50 -0700)]
ARM: DT: msm8660: Add sdcc nodes
Add the sdcc nodes to support the SD card controller using pl180
mmci driver. We also add a temporary fixed regulator until the
regulator driver is mainlined.
Cc: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Stephen Boyd <sboyd@codeaurora.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Romain Perier [Fri, 19 Sep 2014 12:36:27 +0000 (12:36 +0000)]
ARM: dts: rockchip: Remove "regulator-always-on" in vcc_rmii for Radxa Rock
On Rockchip RK3188 SoCs the platform driver emac_rockchip is used. This variant driver
enables this regulator when the device driver is loaded. The phy no longer needs
to be always on.
Signed-off-by: Romain Perier <romain.perier@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Chen-Yu Tsai [Thu, 18 Sep 2014 03:24:40 +0000 (11:24 +0800)]
ARM: dts: sun8i: Add DMA controller node
Add the DMA controller node and DMA bindings to the supported devices.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Daniel Mack [Thu, 14 Aug 2014 09:46:13 +0000 (11:46 +0200)]
ARM: pxa: dts: fix ohci controller compatible string
The vendor prefix was renamed from "mrvl" to "marvell". Follow this
change in the dts file.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Daniel Mack [Thu, 14 Aug 2014 09:46:12 +0000 (11:46 +0200)]
ARM: pxa: dts: fix mmc controller compatible string
The vendor prefix was renamed from "mrvl" to "marvell". Follow this
change in the dts file.
Signed-off-by: Daniel Mack <zonque@gmail.com>
Signed-off-by: Haojian Zhuang <haojian.zhuang@linaro.org>
Lucas Weaver [Tue, 19 Aug 2014 13:54:00 +0000 (08:54 -0500)]
ARM: dts: DRA7: Add PMU nodes
DRA74x and DRA72x family of processors vary slightly in the number
of CPUs. So, add different instances of PMU for each of these processor
groups. Further, since the interrupts bypass crossbar and are directly
connected to GIC, mark the dts nodes with relevant information.
Tested with perf utility.
Reviewed-by: Felipe Balbi <balbi@ti.com>
Signed-off-by: Lucas Weaver <l-weaver@ti.com>
Signed-off-by: Nishanth Menon <nm@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Erik van Luijk [Tue, 2 Sep 2014 10:52:12 +0000 (12:52 +0200)]
ARM: at91/dt: at91sam9m10g45ek add rtc node
Add rtc node to both the at91sam9g45 SoC family and the at91sam9m10g45ek board.
Signed-off-by: Erik van Luijk <evanluijk@interact.nl>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Dmitry Lifshitz [Wed, 17 Sep 2014 12:10:08 +0000 (15:10 +0300)]
ARM: dts: cm-t54: setup omap_dwc3
Add "extcon" and "vbus-supply" properties of DWC3 node.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Dmitry Lifshitz [Wed, 17 Sep 2014 12:10:07 +0000 (15:10 +0300)]
ARM: dts: cm-t54: add ADS7846 touchscreen support
Add ADS7846 touchscreen support.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Dmitry Lifshitz [Wed, 17 Sep 2014 12:10:06 +0000 (15:10 +0300)]
ARM: dts: cm-t54: add Startek LCD support
Add DT support for Startek KD050C LCD 800x480 panel.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Dmitry Lifshitz [Wed, 17 Sep 2014 12:10:05 +0000 (15:10 +0300)]
ARM: dts: cm-t54: add HDMI/DVI display data
Add DSS related pinmux and display data nodes required to support HDMI
and DVI video out on CM-T54.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Dmitry Lifshitz [Wed, 17 Sep 2014 12:10:04 +0000 (15:10 +0300)]
ARM: dts: cm-t54: fix mux mode comment style
Follow the comment style of mode0_name.modeX_name for pins
which mux mode differs from MUX_MODE0.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Dmitry Lifshitz [Wed, 17 Sep 2014 12:10:03 +0000 (15:10 +0300)]
ARM: dts: sbc-t54: fix mux mode comment style
Follow the comment style of mode0_name.modeX_name for pins
which mux mode differs from MUX_MODE0.
Signed-off-by: Dmitry Lifshitz <lifshitz@compulab.co.il>
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Thu, 18 Sep 2014 16:03:36 +0000 (09:03 -0700)]
ARM: dts: Enable PMIC idle configuration for LDP
With the IO chain reconfigure fixed, we can now enable the PMIC
scripts for LDP.
Note that at least on my es3.0 based LDP, the UART seems to be
flakey after wake-up events from off-idle and hangs but eventually
continues.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Thu, 18 Sep 2014 16:03:36 +0000 (09:03 -0700)]
ARM: dts: Add support for Ethernet on some N900 macro boards
As we have support for this in board-rx51-peripherals.c, let's
add it to the .dts files too.
Note that the reset GPIO will eventually go to the driver.
For now let's just pull it down and skip any further reset
in case the bootloader has configured the MAC address so
NFSroot works.
Also note that after 3430-sdp are using proper GPMC timings
we can remove the tests for smsc,lan91c94 in gpmc.c.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Thu, 18 Sep 2014 16:03:36 +0000 (09:03 -0700)]
ARM: dts: Do not set pulls for I2C lines
There are external pulls on these lines and enabling the
internal pulls can cause issue. This is because the internal
pulls are parallel with the external pulls. So let's clear
the internal I2C pulls.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Thu, 18 Sep 2014 16:03:36 +0000 (09:03 -0700)]
ARM: dts: omap: Remove WAKEUPENABLE mux options for UARTs
This is no longer needed as the device specific wake-up event
can now be specified with interrupts-extended property where
the second interrupt is the pinctrl-single register, such as
the UART3 RX pin.
Note that twl4030_omap3.dtsi needs to set WAKEUPENABLE for
off-idle to properly trigger the PMIC scripts. And GPIO pins
still need to set WAKEUPENABLE for wake-up events.
Signed-off-by: Tony Lindgren <tony@atomide.com>
Tony Lindgren [Thu, 18 Sep 2014 16:03:36 +0000 (09:03 -0700)]
ARM: dts: omap3-overo: Fix UART wake-up events
Compared to legacy booting, we don't have wake-up events enabled
for device tree based booting. This means that if deeper idle
states are enabled, the device won't wake up to UART events and
seems like it has hung.
Let's fix that by adding the wake-up interrupt. Note that we
don't need to set the PIN_OFF_WAKEUPENABLE any longer, that's
handled by the wake-up interrupt when the serial driver does
request_irq on it.
Tested with the following on omap3-overo-summit that has the
ES2.1 omap:
#!/bin/bash
uarts=$(find /sys/class/tty/ttyO*/device/power/ -type d)
for uart in $uarts; do
echo 3000 > $uart/autosuspend_delay_ms
done
uarts=$(find /sys/class/tty/ttyO*/power/ -type d)
for uart in $uarts; do
echo enabled > $uart/wakeup
echo auto > $uart/control
done
echo 1 > /sys/kernel/debug/pm_debug/enable_off_mode
# grep -i uart /proc/interrupts
90: 1085 INTC 74 OMAP UART2
338: 5 pinctrl 366 OMAP UART2
# grep ^core_pwrdm /sys/kernel/debug/pm_debug/count
core_pwrdm (ON),OFF:1654,RET:131,INA:39,ON:1825...
Signed-off-by: Tony Lindgren <tony@atomide.com>
Marek Roszko [Sun, 24 Aug 2014 03:12:05 +0000 (23:12 -0400)]
ARM: at91/dt: sama5d3: use new pinctrl compatible string
This switches the SAMA5D3 to use the new atmel,sama5d3-pinctrl id that was
added with the drive strength options patch.
Signed-off-by: Marek Roszko <mark.roszko@gmail.com>
Acked-by: Linus Walleij <linus.walleij@linaro.org>
[nicolas.ferre@atmel.com: second compatible string kept as at91sam9x5]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Alexandre Belloni [Tue, 16 Sep 2014 08:43:57 +0000 (10:43 +0200)]
ARM: at91/dt: sama5d3: add the nfc clock
The atmel_nand driver is now able to handle the nfc clock, add it to sama5d3.
Signed-off-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Boris BREZILLON [Tue, 9 Sep 2014 10:14:20 +0000 (12:14 +0200)]
ARM: at91/dt: declare sckc node on at91sam9g45
Declare the SCKC (Slow Clock Configuration) block and its clks.
Make use of the clk32k clk instead of slow_osc where appropriate.
Signed-off-by: Boris BREZILLON <boris.brezillon@free-electrons.com>
Acked-by: Alexandre Belloni <alexandre.belloni@free-electrons.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
David Dueck [Wed, 17 Sep 2014 08:33:32 +0000 (10:33 +0200)]
ARM: at91/dt: Fix typo regarding can0_clk
Otherwise the clock for can0 will never get enabled.
Signed-off-by: David Dueck <davidcdueck@googlemail.com>
Signed-off-by: Anthony Harivel <anthony.harivel@emtrion.de>
Acked-by: Boris Brezillon <boris.brezillon@free-electrons.com>
Cc: stable@vger.kernel.org # v3.14
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Bo Shen [Wed, 11 Jun 2014 10:14:42 +0000 (18:14 +0800)]
ARM: at91/dt: at91sam9g20: switch ssc compatible string
As the SSC integrate in at91sam9g20 support frame sync length
extension, so switch compatible string to support this feature.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Bo Shen [Wed, 11 Jun 2014 10:14:41 +0000 (18:14 +0800)]
ARM: at91/dt: at91sam9rl: switch ssc compatible string
As the SSC integrate in at91sam9rl support frame sync length
extension, so switch compatible string to support this feature.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
Bo Shen [Thu, 18 Sep 2014 12:56:43 +0000 (14:56 +0200)]
ARM: at91: sama5d3xek: reserve dma channel for audio
We set the DMA configuration on USARTs in the SoC DT in (ARM: at91: sama5d3:
add usart dma configurations). As the audio must work with DMA channels, we
reserve some dma channels for audio, or else audio won't work.
Signed-off-by: Bo Shen <voice.shen@atmel.com>
[nicolas.ferre@atmel.com: move to the sama5d3xmb.dtsi to cover all board variants]
Signed-off-by: Nicolas Ferre <nicolas.ferre@atmel.com>
kiran.padwal@smartplayin.com [Wed, 17 Sep 2014 10:30:25 +0000 (16:00 +0530)]
ARM: DT: apq8064: Add i2c device nodes
This patch adds i2c pinctrl DT node for IFC6410 board. It also adds
necessary DT support for i2c eeprom which is present on IFC6410.
Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Srinivas Kandagatla [Wed, 17 Sep 2014 05:39:35 +0000 (06:39 +0100)]
ARM: DT: apq8064: add support to sdcc4 for wlan.
This patch adds sdcc4 node to enable wlan support on IFC6410
Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@linaro.org>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
kiran.padwal@smartplayin.com [Tue, 16 Sep 2014 11:45:38 +0000 (17:15 +0530)]
ARM: dts: qcom: Add I2C dt node for MSM8974 and DB8074 board
Add support for i2c controller on the DB8074 board. It also adds necessary
DT support for i2c eeprom which is present on DB8074 board.
Signed-off-by: Kiran Padwal <kiran.padwal@smartplayin.com>
Signed-off-by: Kumar Gala <galak@codeaurora.org>
Thierry Reding [Wed, 17 Sep 2014 16:02:45 +0000 (10:02 -0600)]
ARM: tegra: enable PCIe in Jetson TK1 DT
Enable both PCIe ports, one of which is connected to an onboard ethernet
chip, whereas the other goes to a miniPCIe slot.
Signed-off-by: Thierry Reding <treding@nvidia.com>
[swarren, fixed PCIe supply property names in DT]
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Thierry Reding [Wed, 17 Sep 2014 16:02:44 +0000 (10:02 -0600)]
ARM: tegra: add PCIe to Tegra124 DT
Add the PCIe controller device tree node and hook up the PCIe PHY from
the XUSB pad controller.
Signed-off-by: Thierry Reding <treding@nvidia.com>
Signed-off-by: Stephen Warren <swarren@nvidia.com>
Chen-Yu Tsai [Tue, 16 Sep 2014 16:04:46 +0000 (00:04 +0800)]
ARM: dts: sun5i: Add DT for HSG H702 tablet board
This is a Q8 format 7 inch tablet with an Allwinner A13 SoC.
It has 512MB DRAM, 4GB NAND flash, an accelerometer, camera,
RTL8188-based WiFi, and micro SD slot for external storage.
It is likely made by a subsidiary of Hanns.G (Hannstar).
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Chen-Yu Tsai [Tue, 16 Sep 2014 16:04:45 +0000 (00:04 +0800)]
ARM: dts: sunxi: Add fixed 5V regulator
Most if not all boards we've seen have a fixed 5V regulator, which is
the main power supply and/or fixed output of the PMIC.
Add this one to the common regulators DTSI.
Signed-off-by: Chen-Yu Tsai <wens@csie.org>
Signed-off-by: Maxime Ripard <maxime.ripard@free-electrons.com>
Thomas Petazzoni [Wed, 17 Sep 2014 13:45:39 +0000 (15:45 +0200)]
ARM: mvebu: switch the Armada 370 RD board to internal registers at 0xf1000000
Recent bootloader versions from Marvell that have DT support and
various other new features remap the internal registers at
0xf1000000. We have already done this change for most of the
development boards from Marvell, and this commit does this change for
the Marvell Armada 370 RD board.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1410961539-10388-1-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Thomas Petazzoni [Tue, 16 Sep 2014 19:37:57 +0000 (21:37 +0200)]
Documentation: arm: add hardware datasheet reference for Marvell Armada XP
Some time ago, the "Function Specifications" for the Marvell Armada XP
processor has been released. However, the "Hardware Specifications"
were not released at the same time. They have now been released
publicly, so this commit updates the Marvell documentation file with
the references to this new documentation.
Three documents are available, one for each of the three variants of
Armada XP: 78230, 78260 and 78460.
Signed-off-by: Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
Link: https://lkml.kernel.org/r/1410896277-32476-1-git-send-email-thomas.petazzoni@free-electrons.com
Signed-off-by: Jason Cooper <jason@lakedaemon.net>
Geert Uytterhoeven [Tue, 16 Sep 2014 19:57:16 +0000 (21:57 +0200)]
ARM: shmobile: Add manufacturer for KZM boards
KZM-A9-Dual and KZM-A9-GT are manufactured by Kyoto Microcomputer Co.
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Simon Horman <horms+renesas@verge.net.au>
Heiko Stuebner [Tue, 16 Sep 2014 16:59:36 +0000 (18:59 +0200)]
ARM: dts: rockchip: fix rk3188 emmc pull references
Fix a copy'n'paste error making the rk3188 emmc pinctrl nodes reference
the pcfg_pull_default setting that is not available on rk3188.
Reported-by: Naoki FUKAUMI <naobsd@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Heiko Stuebner [Tue, 16 Sep 2014 16:53:10 +0000 (18:53 +0200)]
ARM: dts: rockchip: fix swapped Radxa Rock pinctrl references
The host and otg regulator pinctrl settings got swapped, making the host
reference the otg pinctrl and the other way round. The actual pins are
correct (gpio0-3 for host and gpio2-31 for otg).
Reported-by: Naoki FUKAUMI <naobsd@gmail.com>
Signed-off-by: Heiko Stuebner <heiko@sntech.de>
Mark Brown [Sat, 6 Sep 2014 11:40:16 +0000 (12:40 +0100)]
ARM: zynq: Add ISL9305 regulator on Parallella board
There is an ISL9305 regulator on the Parallella board, add it to the DT
along with descriptions of all the supplies.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Soren Brinkmann [Wed, 20 Aug 2014 15:56:59 +0000 (08:56 -0700)]
ARM: zynq: DT: Add Ethernet phys
Add missing Ethernet phys to Zynq DTs.
Signed-off-by: Soren Brinkmann <soren.brinkmann@xilinx.com>
Signed-off-by: Michal Simek <michal.simek@xilinx.com>
Zhangfei Gao [Wed, 20 Aug 2014 07:38:26 +0000 (15:38 +0800)]
ARM: dts: hix5hd2: add wdg node
Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhangfei Gao [Wed, 20 Aug 2014 07:36:37 +0000 (15:36 +0800)]
ARM: dts: hix5hd2: add gpio node
Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhangfei Gao [Wed, 20 Aug 2014 07:14:39 +0000 (15:14 +0800)]
ARM: dts: hix5hd2: add sata node
Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhangfei Gao [Wed, 20 Aug 2014 06:57:44 +0000 (14:57 +0800)]
ARM: dts: hix5hd2: add usb node
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Jiancheng Xue <xuejiancheng@huawei.com>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhangfei Gao [Wed, 20 Aug 2014 06:37:48 +0000 (14:37 +0800)]
ARM: dts: hix5hd2: add mmc node
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Zhangfei Gao [Tue, 19 Aug 2014 03:00:33 +0000 (11:00 +0800)]
ARM: dts: hix5hd2: add gmac node
Signed-off-by: Zhangfei Gao <zhangfei.gao@linaro.org>
Signed-off-by: Wei Xu <xuwei5@hisilicon.com>
Anson Huang [Thu, 11 Sep 2014 03:29:41 +0000 (11:29 +0800)]
ARM: dts: imx6: make gpt per clock can be from OSC
Original gpt per clk parent is from ipg_per clk which
may be scaled when system enter low bus mode, as ipg
clk will be lower in low bus mode, to keep system clk
NOT drift, select gpt per clk parent from OSC which
is at fixed freq always.
On i.mx6qdl, add a osc_per clk source for i.mx6q
TO > 1.0 and all i.MX6dl SoC.
On i.mx6sx, just make gpt per clk from OSC.
Signed-off-by: Anson Huang <b20788@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Tue, 9 Sep 2014 06:07:31 +0000 (23:07 -0700)]
ARM: dts: imx: ventana: add canbus support for GW52xx
The GW52xx baseboard supports CANbus so we enable it, configure its pinmux
and CAN_STBY gpio.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Tue, 9 Sep 2014 06:07:30 +0000 (23:07 -0700)]
ARM: dts: imx: ventana: cleanup pinctrl groups
Follow the conventions for pinctrl:
- grouping pinctrl in logical alphabatized groups
- remove any pinctrl not being used by a driver or needed by user
- move iomuxc to bottom of file for readability
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Tue, 9 Sep 2014 06:07:29 +0000 (23:07 -0700)]
ARM: dts: imx: ventana: configure padconf for all pins
Follow the convention of configuring padconf for all pins and not leaving
any 0x80000000 to leave them un-configured.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Tue, 9 Sep 2014 06:07:28 +0000 (23:07 -0700)]
ARM: dts: imx: ventana: use gpio constants
Use the gpio contants defined in bindings for active high/low
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Tue, 9 Sep 2014 06:07:27 +0000 (23:07 -0700)]
ARM: dts: imx: ventana: remove unused aliases
Remove aliases that are either not used by bootloader or are provided via
included dtsi files.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Tim Harvey [Tue, 9 Sep 2014 06:07:26 +0000 (23:07 -0700)]
ARM: dts: imx: ventana: remove unsupported dt nodes
The general device-tree rule is to not include nodes that do not have a driver
or bindings in a dts/dtsi. Remove the place-holder nodes from the Gateworks
Ventana boards until a time that a driver with proper bindings exists.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lothar Waßmann [Tue, 9 Sep 2014 11:26:03 +0000 (13:26 +0200)]
ARM: dts: imx28-tx28: add alias for CAN XCVR regulator
This alias is used by U-Boot to enable/disable the regulator depending
on baseboard type.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lothar Waßmann [Tue, 9 Sep 2014 11:26:02 +0000 (13:26 +0200)]
ARM: dts: imx28-tx28: add spi-gpio as alternative for spi-mxs
The spi-mxs driver does not allow full duplex SPI transfers. The
spi-gpio driver may be used as an alternative if this is required.
Make the choice between those drivers easier for the end user by
providing settings for both drivers.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lothar Waßmann [Tue, 9 Sep 2014 11:26:01 +0000 (13:26 +0200)]
ARM: dts: imx28-tx28: use GPIO flags
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Lothar Waßmann [Tue, 9 Sep 2014 11:26:00 +0000 (13:26 +0200)]
ARM: dts: imx28-tx28: remove spidev labels and add third instance of spidev
The labels on the spidev nodes are not used and not required, so
remove them. The TX28 supports 3 chipselects on the SPI
interface. Make all those chipselects available to the user.
Signed-off-by: Lothar Waßmann <LW@KARO-electronics.de>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Shengjiu Wang [Tue, 9 Sep 2014 09:13:27 +0000 (17:13 +0800)]
ARM: dts: imx6sl: add baud clock and clock-names for ssi
Baud clock is used for bit clock generation in master mode. Ipg clock
is peripheral clock and peripheral access clock.
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Shengjiu Wang [Tue, 9 Sep 2014 09:13:26 +0000 (17:13 +0800)]
ARM: dts: imx6qdl: add baud clock and clock-names for ssi
Baud clock is used for bit clock generation in master mode. Ipg clock
is peripheral clock and peripheral access clock.
Signed-off-by: Shengjiu Wang <shengjiu.wang@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Fri, 5 Sep 2014 12:46:10 +0000 (09:46 -0300)]
ARM: dts: imx6qdl-sabresd: Configure the pins locally
Passing '0x80000000' to the pin configuration means that kernel will skip the
IOMUXC_SW_PAD_CTL configuration and will use whathever values come from the
bootloader.
Instead of relying on the bootloader setup, let's configure it in the kernel to
have predictable settings.
'0x1b0b0' is the default POR value for all these pins and has also been verified
that the pins are using this value by manually inspecting the IOMUXC_SW_PAD_CTL
registers, so no functional change has been made.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
Fabio Estevam [Fri, 5 Sep 2014 01:31:23 +0000 (22:31 -0300)]
ARM: dts: imx28-m28evk: Fix display duplicate name warning
The lcdif node has a property named "display" and also a child node
called "display", which causes the following warning:
device-tree: Duplicate name in lcdif@
80030000, renamed to "display#1"
Rename the child node name in order to avoid the warning.
Signed-off-by: Fabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: Shawn Guo <shawn.guo@freescale.com>
projects / openwrt / staging / blogic.git / log