openwrt/staging/blogic.git
16 years agoALSA: HDA VIA: Replace buggy Mic Boost
Harald Welte [Mon, 15 Sep 2008 14:43:23 +0000 (22:43 +0800)]
ALSA: HDA VIA: Replace buggy Mic Boost

VT1708S' Mic Boost should be hidden in hardware design according to some
customers' requirements.  However, in case of bugs, it has to be exhibited to
normal users, so we need to:
* open a software backdoor, which is disabled by default in hardware
* re-write .tlv & .info, to indicate the actual necessary info, which we cannot
  get from amplifier's capabiliies

Signed-off-by: Logan Li <LoganLi@viatech.com.cn>
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA VIA: Fix 2nd S/PDIF out function
Harald Welte [Mon, 15 Sep 2008 14:42:26 +0000 (22:42 +0800)]
ALSA: HDA VIA: Fix 2nd S/PDIF out function

As it seems, the recently-sent patch for the 2nd S/PDIF (HDMI) output
is not working with alsa-kernel 1.0.18rc3.

This patch makes it work by
* activating the second S/PDIF output pin in the pin config
* consolidating the dig_playback_pcm_prepare() with extra_dig_pcm_prepare()
  functions
* remove the need for an extra hda_pcm_stream structure and rather represents
  the second digital output as substream within the primary S/PDIF digital out
  stream.

Signed-off-by: Logan Li <LoganLi@viatech.com.cn>
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA VIA: Fix crash on codecs without Headphone
Harald Welte [Mon, 15 Sep 2008 14:41:31 +0000 (22:41 +0800)]
ALSA: HDA VIA: Fix crash on codecs without Headphone

Don't enumerate via_hp_mixer while hp_mux is null (headphone does not exist),
to fix the crash of via_independent_hp_info (via_hp_mixer's .info), which will
reference hp_mux.

Signed-off-by: Logan Li <LoganLi@viatech.com.cn>
Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: Separate common pxa2xx-pcm code
Dmitry Baryshkov [Wed, 10 Sep 2008 01:01:20 +0000 (05:01 +0400)]
ALSA: Separate common pxa2xx-pcm code

ASoC and non-ASoC drivers for PCM DMA on PXA share lots of common code.
Move it to pxa2xx-lib.

[Fixed some checkpatch warnings -- broonie]

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: pxa2xx-ac97-lib: support building for several CPUs
Dmitry Baryshkov [Wed, 10 Sep 2008 01:01:18 +0000 (05:01 +0400)]
ALSA: pxa2xx-ac97-lib: support building for several CPUs

Support building of pxa2xx-ac97-lib for several CPUs by making code
run-time selected, not only compile-time.

[Fixed 3XX->3xx typos in ifdef checks -- broonie.]

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: Separate common pxa2xx-ac97 code
Dmitry Baryshkov [Wed, 10 Sep 2008 01:01:17 +0000 (05:01 +0400)]
ALSA: Separate common pxa2xx-ac97 code

ASoC and non-ASoC drivers for ACLINK on PXA share lot's of common code.
Move all common code into separate module snd-pxa2xx-lib.

[Fixed handing of SND_AC97_CODEC in Kconfig and some checkpatch warnings
 -- broonie]

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Support runtime selection of CPU in pxa2xx-i2s
Dmitry Baryshkov [Wed, 10 Sep 2008 01:01:19 +0000 (05:01 +0400)]
sound: ASoC: Support runtime selection of CPU in pxa2xx-i2s

Signed-off-by: Dmitry Baryshkov <dbaryshkov@gmail.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Add WM8971 CODEC driver
Kenneth Kiraly [Wed, 10 Sep 2008 18:33:32 +0000 (19:33 +0100)]
sound: ASoC: Add WM8971 CODEC driver

The WM8971 is a low power, high quality stereo codec designed for
portable digital audio applications.

This driver was originally written by Kenneth Kiraly.  While out of tree
it has had updates to reflect current kernel APIs and coding standards
from Graeme Gregory and Mark Brown.

Signed-off-by: Kenneth Kiraly <kiraly@lab126.com>
Signed-off-by: Liam Girdwood <lg@opensource.wolfsonmicro.com>
Signed-off-by: Graeme Gregory <gg@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA: patch_analog: Quirk for Asus P5Q Premium/Pro boards.
Robin H. Johnson [Sat, 13 Sep 2008 23:55:01 +0000 (16:55 -0700)]
ALSA: HDA: patch_analog: Quirk for Asus P5Q Premium/Pro boards.

Use 6STACK_DIG for the AD2000BX variant of the AD1989B chip used by Asus
on their Asus P5Q Premium and Pro boards.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA: patch_analog: Implement multiple outputs for AD1988
Robin H. Johnson [Sat, 13 Sep 2008 23:54:58 +0000 (16:54 -0700)]
ALSA: HDA: patch_analog: Implement multiple outputs for AD1988

Implement the slave_dig_outs for AD1989 cards. Untested due to lack of
hardware.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA: hda_proc: Fix printf format specifier
Robin H. Johnson [Sat, 13 Sep 2008 23:54:57 +0000 (16:54 -0700)]
ALSA: HDA: hda_proc: Fix printf format specifier

The Pincap output had a typod format specifier, leading to an extraneous "08"
in the output, which is a reserved bit of the Vref field, and was really
confused :-).

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA: hda_local: Less magic numbers.
Robin H. Johnson [Sat, 13 Sep 2008 23:54:59 +0000 (16:54 -0700)]
ALSA: HDA: hda_local: Less magic numbers.

Explain some of the magic numbers I saw while trying to fix the AD1989 SPDIF
issue. Maybe should just use the expanded form directly in the verbs?

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA: patch_analog: Fix SPDIF output on AD1989B
Robin H. Johnson [Sat, 13 Sep 2008 23:55:00 +0000 (16:55 -0700)]
ALSA: HDA: patch_analog: Fix SPDIF output on AD1989B

The SPDIF pins for AD1989 are not enabled by default. Set OUT bit so that they
actually work. Also initialize the HDMI SPDIF at the same time.

Signed-off-by: Robin H. Johnson <robbat2@gentoo.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: 92hd73xx fixes
Matthew Ranostay [Sat, 13 Sep 2008 20:45:39 +0000 (16:45 -0400)]
ALSA: hda: 92hd73xx fixes

Added support for defining the number of amps and the creation
of the private_dimux dynamically for the 92hd73xx codec family.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
[Fixed a typo by tiwai]
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: Fix section for snd-aica platform driver
Uwe Kleine-König [Sun, 14 Sep 2008 19:32:33 +0000 (21:32 +0200)]
ALSA: Fix section for snd-aica platform driver

Don't use __init but __devinit to define probe function.  A pointer to
snd_aica_probe is passed to the core via platform_driver_register and so the
function must not disappear after the module is loaded.  Using __init
and having HOTPLUG=y and SND_AICA=m the following probably oopses:

echo -n AICA > /sys/bus/platform/driver/AICA/unbind
echo -n AICA > /sys/bus/platform/driver/AICA/bind

Strange enough add_aicamixer_controls which is only called by
snd_aica_probe was already using __devinit.

While at it move the remove function to .devexit.text section.

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Cc: Adrian McMenamin <adrian@mcmen.demon.co.uk>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: Jaroslav Kysela <perex@perex.cz>
Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: fixed hp_nid DAC for DELL_M6
Matthew Ranostay [Sat, 13 Sep 2008 14:36:58 +0000 (10:36 -0400)]
ALSA: hda: fixed hp_nid DAC for DELL_M6

This patch sets the HP out not used by the "Headphone to Line Out" switch to the
hp_nid.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: Input port AMP controls
Matthew Ranostay [Thu, 11 Sep 2008 13:49:39 +0000 (09:49 -0400)]
ALSA: hda: Input port AMP controls

Added support for controlling hardware gain amps on input ports
using a volume control mixer with a mux selecting the port being controlled.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: Added a STAC_HP_M4 quirk
Matthew Ranostay [Fri, 12 Sep 2008 16:02:30 +0000 (12:02 -0400)]
ALSA: hda: Added a STAC_HP_M4 quirk

Added a new quirk for STAC_HP_M4 series for an 92hd75xxx family laptop.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: fix oopses in snd-hda-intel after digital slave support additions
Herton Ronaldo Krzesinski [Sat, 13 Sep 2008 14:44:29 +0000 (16:44 +0200)]
ALSA: hda: fix oopses in snd-hda-intel after digital slave support additions

Many places fail to check if codec has slave_dig_outs entries (the most common
case is not having any entry), leading to various possible oopses in hda_codec
code.

Signed-off-by: Herton Ronaldo Krzesinski <herton@mandriva.com.br>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Fix WM8731 SPI write
Alan Horstmann [Tue, 9 Sep 2008 18:25:49 +0000 (19:25 +0100)]
sound: ASoC: Fix WM8731 SPI write

Ensure wm8731_spi_write byte order is consistent regardless of
endianess.

Signed-off-by: Alan Horstmann <gineera@aspect135.co.uk>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: virtuoso: add Xonar HDAV1.3 support
Clemens Ladisch [Mon, 22 Sep 2008 07:12:11 +0000 (09:12 +0200)]
ALSA: virtuoso: add Xonar HDAV1.3 support

Add support for the Asus Xonar HDAV1.3 and the Xonar HDAV1.3 Deluxe.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: rename first PCM device
Clemens Ladisch [Mon, 22 Sep 2008 07:07:53 +0000 (09:07 +0200)]
ALSA: oxygen: rename first PCM device

Rename the first PCM device from "Analog" to "Multichannel" because it
can be used for HDMI output on the Xonar HDAV.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: virtuoso: rename AC97 callback function
Clemens Ladisch [Mon, 22 Sep 2008 07:07:20 +0000 (09:07 +0200)]
ALSA: virtuoso: rename AC97 callback function

Rename the callback function that switches between line and mic inputs
on the Xonar D1 because it is also usable on other models.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: virtuoso: make number of PCM1796 DACs configurable
Clemens Ladisch [Mon, 22 Sep 2008 07:06:38 +0000 (09:06 +0200)]
ALSA: virtuoso: make number of PCM1796 DACs configurable

Do not use a hardcoded number when iterating over the PCM1796 DACs to
allow for cards with a different number of analog output channels.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: virtuoso: allow I2C-connected PCM1796
Clemens Ladisch [Mon, 22 Sep 2008 07:06:04 +0000 (09:06 +0200)]
ALSA: virtuoso: allow I2C-connected PCM1796

Add support for PCM1796 chips that are connected with an I2C bus instead
of SPI.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: add self-documenting functions
Clemens Ladisch [Mon, 22 Sep 2008 07:05:29 +0000 (09:05 +0200)]
ALSA: oxygen: add self-documenting functions

Introduce some trivial functions to better document the relationships of
the various model callbacks.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: add UART I/O functions
Clemens Ladisch [Mon, 22 Sep 2008 07:04:43 +0000 (09:04 +0200)]
ALSA: oxygen: add UART I/O functions

Add functions to allow model drivers to communicate with external chips
by doing I/O with the not-used-for-MIDI UART.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: configure MIDI via device_config
Clemens Ladisch [Mon, 22 Sep 2008 07:03:42 +0000 (09:03 +0200)]
ALSA: oxygen: configure MIDI via device_config

To enable the MIDI port, model drivers must now set flags in
device_config, not only in misc_flags.  This allows model drivers to
enable the UART without creating an ALSA MIDI device.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: rename pcm_dev_cfg
Clemens Ladisch [Mon, 22 Sep 2008 07:02:08 +0000 (09:02 +0200)]
ALSA: oxygen: rename pcm_dev_cfg

Rename the pcm_dev_cfg field to device_config because there will be
additional flags that do not describe PCM devices.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: virtuoso: create common functions for GPIO bit switch controls
Clemens Ladisch [Mon, 22 Sep 2008 07:01:11 +0000 (09:01 +0200)]
ALSA: virtuoso: create common functions for GPIO bit switch controls

Factor out the common code of the mixer callbacks that handle controls
that just switch a single GPIO bit.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: virtuoso: handle D2X/DX dynamically
Clemens Ladisch [Mon, 22 Sep 2008 07:00:30 +0000 (09:00 +0200)]
ALSA: virtuoso: handle D2X/DX dynamically

The Xonar D2X and DX are very similar to the D2 and D1, respectively, so
we can handle the differences dynamically instead of using a separate
model structure for each one.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: handle X-Meridian dynamically
Clemens Ladisch [Mon, 22 Sep 2008 06:59:18 +0000 (08:59 +0200)]
ALSA: oxygen: handle X-Meridian dynamically

Handle the differences between the X-Meridian and the other models in
the probe callback instead of using a second model structure.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: remove X-Meridian magic number
Clemens Ladisch [Mon, 22 Sep 2008 06:57:24 +0000 (08:57 +0200)]
ALSA: oxygen: remove X-Meridian magic number

Introduce symbols that indicate the two models handled by the snd-oxygen
driver, instead of using a magic number.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: add probe callback
Clemens Ladisch [Mon, 22 Sep 2008 06:56:01 +0000 (08:56 +0200)]
ALSA: oxygen: add probe callback

Add a probe callback to the model structure so that model-specific
drivers can refine their model detection before the card is initialized.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: use a copy of the model struct
Clemens Ladisch [Mon, 22 Sep 2008 06:55:19 +0000 (08:55 +0200)]
ALSA: oxygen: use a copy of the model struct

Put a copy of the model structure into the chip structure so that model-
specific drivers can modify it depending on a particular device
instance.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: oxygen: use SPDIF channel status symbols
Clemens Ladisch [Mon, 22 Sep 2008 06:53:31 +0000 (08:53 +0200)]
ALSA: oxygen: use SPDIF channel status symbols

When setting the SPDIF channel status sample rate field, use the
recently defined symbols instead of magic numbers.

Signed-off-by: Clemens Ladisch <clemens@ladisch.de>
16 years agoALSA: Release v1.0.18rc3
Jaroslav Kysela [Tue, 9 Sep 2008 16:55:25 +0000 (18:55 +0200)]
ALSA: Release v1.0.18rc3

Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA patch_via.c: Second S/PDIF (HDMI) support
Harald Welte [Tue, 9 Sep 2008 08:02:09 +0000 (16:02 +0800)]
ALSA: HDA patch_via.c: Second S/PDIF (HDMI) support

The VT1702 and VT1708S have a second S/PDIF output which is used to
connect to a HDMI transmitter.  This patch adds support for it.

Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA patch_via.c: Independent DAC for headphone
Harald Welte [Tue, 9 Sep 2008 07:58:27 +0000 (15:58 +0800)]
ALSA: HDA patch_via.c: Independent DAC for headphone

This mode allows an output stream to have two substreams, one for the
speakers and one for the headphone.  Each of the substreams has independent
PCM data and uses a different DAC.

Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA patch_via.c: Mute on headphone plug-in
Harald Welte [Tue, 9 Sep 2008 07:57:32 +0000 (15:57 +0800)]
ALSA: HDA patch_via.c: Mute on headphone plug-in

Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA patch_via.c: Add VT1708S and VT1702 support
Harald Welte [Tue, 9 Sep 2008 07:56:01 +0000 (15:56 +0800)]
ALSA: HDA patch_via.c: Add VT1708S and VT1702 support

The VT1702 and VT1708S codecs are new HDA codecs by VIA.

This patch adds support for them to the patch_via.c file for HDA

Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA patch_via.c: Fix inversion of surround and side channels
Harald Welte [Tue, 9 Sep 2008 07:53:36 +0000 (15:53 +0800)]
ALSA: HDA patch_via.c: Fix inversion of surround and side channels

In the current driver, there is a consistent mistake between the SURROUND and
the SIDE channels.  This patch fixes it.

Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA patch_via.c: HP and CD pin connect config
Harald Welte [Tue, 9 Sep 2008 07:50:37 +0000 (15:50 +0800)]
ALSA: HDA patch_via.c: HP and CD pin connect config

Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: HDA patch_via.c: cleanup
Harald Welte [Tue, 9 Sep 2008 07:40:38 +0000 (15:40 +0800)]
ALSA: HDA patch_via.c: cleanup

* add extra parenthesis to make code more readable
* use kzalloc() for alloc+zero rather than kcalloc()
* ensure that AUTO_SEQ_* starts at 0

Signed-off-by: Harald Welte <HaraldWelte@viatech.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: fix section for sa11xx-uda1341 platform driver
Uwe Kleine-König [Tue, 9 Sep 2008 11:47:11 +0000 (13:47 +0200)]
ALSA: fix section for sa11xx-uda1341 platform driver

Don't use __init but __devinit to define probe function.  A pointer to
sa11xx_uda1341_probe is passed to the core via platform_driver_register
and so the function must not disappear after the module is loaded.  Using
__init and having HOTPLUG=y and SND_SA11XX_UDA1341=m the following
probably oopses:

echo -n sa11xx_uda1341.1 > /sys/bus/platform/driver/sa11xx_uda1341/unbind
echo -n sa11xx_uda1341.1 > /sys/bus/platform/driver/sa11xx_uda1341/bind

Signed-off-by: Uwe Kleine-König <ukleinek@informatik.uni-freiburg.de>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Brian Avery <b.avery@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda - add missing slave_dig_outs for 92HD73bxx
Matthew Ranostay [Tue, 9 Sep 2008 08:46:38 +0000 (10:46 +0200)]
ALSA: hda - add missing slave_dig_outs for 92HD73bxx

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: SPDIF mux name change
Matthew Ranostay [Mon, 8 Sep 2008 15:36:59 +0000 (11:36 -0400)]
ALSA: hda: SPDIF mux name change

Changed the mux naming scheme from "IEC9258 Mux" to "IEC958 Playback Source" to match
the coding style.

Signed-by-off: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: digital slave support for IDT codecs
Matthew Ranostay [Mon, 8 Sep 2008 15:20:05 +0000 (11:20 -0400)]
ALSA: hda: digital slave support for IDT codecs

Added slave_dig_outs entries for several IDT codecs that have multiple
SPDIF outs, and enabled these SPDIF outs in several pin configs.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ASoC: Use codec digital mute when stopping playback
Mark Brown [Sat, 6 Sep 2008 17:33:24 +0000 (18:33 +0100)]
ALSA: ASoC: Use codec digital mute when stopping playback

Muting the DAC masks artefacts introduced as the digital stream shuts
down, for example when the input stops being clocked.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ASoC: Sort Kconfig and Makefile entries for codecs
Mark Brown [Sat, 6 Sep 2008 17:11:51 +0000 (18:11 +0100)]
ALSA: ASoC: Sort Kconfig and Makefile entries for codecs

Hopefully this will make merges a little bit easier.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ASoC: Fix indentation in WM9713
Mark Brown [Fri, 5 Sep 2008 21:40:49 +0000 (22:40 +0100)]
ALSA: ASoC: Fix indentation in WM9713

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: slave digital out support
Matthew Ranostay [Sun, 7 Sep 2008 18:31:40 +0000 (14:31 -0400)]
ALSA: hda: slave digital out support

Added support for playing a stream on multiple digital outs. This is done
by defining codec->slave_dig_outs as array of hda_nid_t with a null-terminated entry to set the
slave SPDIF outs, in which the slave outs have cloned settings of the master out (e.g. dig_out_nid).

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: fix section mismatch in the sound_core
Krzysztof Helt [Sun, 7 Sep 2008 15:24:33 +0000 (17:24 +0200)]
ALSA: fix section mismatch in the sound_core

The __exit cleanup_oss_soundcore() is called from
the __init init_soundcore(). This causes section mismatch
and breaks kernel's linking on sparc64.

Remove the __exit attribute from the cleanup_oss_soundcore().

Signed-off-by: Krzysztof Helt <krzysztof.h1@wp.pl>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: use correct lock in snd_ctl_dev_disconnect()
Takashi Iwai [Sun, 7 Sep 2008 10:51:13 +0000 (12:51 +0200)]
ALSA: use correct lock in snd_ctl_dev_disconnect()

The lock used in snd_ctl_dev_disconnect() should be card->ctl_files_rwlock
for protection of card->ctl_files entries, instead of card->controls_rwsem.

Reported-by: Vegard Nossum <vegard.nossum@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ice1712.c: fix coding style
Alexander Beregalov [Sun, 7 Sep 2008 10:17:02 +0000 (14:17 +0400)]
ALSA: ice1712.c: fix coding style

before:
total: 113 errors, 169 warnings, 2786 lines checked
total: 26 errors, 24 warnings, 504 lines checked

after:
total: 14 errors, 163 warnings, 2799 lines checked
total: 0 errors, 24 warnings, 504 lines checked

Compile tested only.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ice1724.c: fix coding style
Alexander Beregalov [Sun, 7 Sep 2008 10:11:04 +0000 (14:11 +0400)]
ALSA: ice1724.c: fix coding style

before:
total: 96 errors, 66 warnings, 2612 lines checked

after:
total: 11 errors, 64 warnings, 2624 lines checked

Compile tested only.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ice1712/ice1724: Coding style fixes part 1 (more coming up)
Vedran Miletic [Sun, 7 Sep 2008 10:00:02 +0000 (12:00 +0200)]
ALSA: ice1712/ice1724: Coding style fixes part 1 (more coming up)

Inspired by Alexander Beregalov's patches for wtm and aureon.c,
I decided to run checkpatch on some more files. After some work
checkpatch.pl-0.23 --no-tree --file --strict <file> reports
0 errors, 0 warnings, 0 checks, n lines checked for:
phase.c
phase.h
juli.c (1 check about unused code, maybe we should comment it)
juli.h (no changes necessary)
In other files I have just fixed // comments and long lines along the
way (but not all of them), more coming up.

Signed-off-by: Vedran Miletic <rivanvx@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: removed unneeded hp_nid references
Matthew Ranostay [Sun, 7 Sep 2008 10:04:17 +0000 (12:04 +0200)]
ALSA: hda: removed unneeded hp_nid references

Removed unneeded hp_nid references for 92hd73xx codec family.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda: SPDIF mux controls
Matthew Ranostay [Sun, 7 Sep 2008 10:03:41 +0000 (12:03 +0200)]
ALSA: hda: SPDIF mux controls

Dynamically create mux controls for SPDIF outs on certain IDT/Sigmatel codecs.

Signed-off-by: Matthew Ranostay <mranostay@embeddedalley.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ice1712/wtm: fix coding style
Alexander Beregalov [Sat, 6 Sep 2008 21:54:27 +0000 (01:54 +0400)]
ALSA: ice1712/wtm: fix coding style

before:
total: 2 errors, 0 warnings, 20 lines checked
total: 49 errors, 2 warnings, 518 lines checked

after:
total: 0 errors, 0 warnings, 20 lines checked
total: 0 errors, 0 warnings, 518 lines checked

Compile tested, size and code are equal.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ice1712/aureon.c: fix coding style
Alexander Beregalov [Sat, 6 Sep 2008 21:19:00 +0000 (01:19 +0400)]
ALSA: ice1712/aureon.c: fix coding style

before:
total: 304 errors, 137 warnings, 2259 lines checked

after:
total: 0 errors, 121 warnings, 2284 lines checked

Compile tested, size is different because of include was changed,
but without that change md5sum is different because of cmp cx,dx/cmp
dx,cx swap and __LINE__ was changed in printk function.

Signed-off-by: Alexander Beregalov <a.beregalov@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Blackfin: Include Blackfin architecture support in build
Cliff Cai [Fri, 5 Sep 2008 10:21:34 +0000 (18:21 +0800)]
sound: ASoC: Blackfin: Include Blackfin architecture support in build

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Blackfin: add Blackfin arch ASoC Kconfig and Makefile
Cliff Cai [Fri, 5 Sep 2008 10:21:42 +0000 (18:21 +0800)]
sound: ASoC: Blackfin: add Blackfin arch ASoC Kconfig and Makefile

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Blackfin: board driver for SSM2602 sound chip
Cliff Cai [Fri, 5 Sep 2008 10:21:41 +0000 (18:21 +0800)]
sound: ASoC: Blackfin: board driver for SSM2602 sound chip

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Blackfin: board driver for AD1980/1 audio codec
Cliff Cai [Fri, 5 Sep 2008 10:21:40 +0000 (18:21 +0800)]
sound: ASoC: Blackfin: board driver for AD1980/1 audio codec

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Blackfin: I2S CPU DAI driver
Cliff Cai [Fri, 5 Sep 2008 10:21:39 +0000 (18:21 +0800)]
sound: ASoC: Blackfin: I2S CPU DAI driver

[Additional coding standards fixes by Mark Brown.]

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Blackfin: DMA Driver for I2S sound chip
Cliff Cai [Fri, 5 Sep 2008 10:21:38 +0000 (18:21 +0800)]
sound: ASoC: Blackfin: DMA Driver for I2S sound chip

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Blackfin: AC97 Blackfin CPU DAI driver
Cliff Cai [Fri, 5 Sep 2008 10:21:37 +0000 (18:21 +0800)]
sound: ASoC: Blackfin: AC97 Blackfin CPU DAI driver

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Blackfin: DMA Driver for AC97 sound chip
Cliff Cai [Fri, 5 Sep 2008 10:21:36 +0000 (18:21 +0800)]
sound: ASoC: Blackfin: DMA Driver for AC97 sound chip

[Additional coding standards fixes by Mark Brown.]

Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Blackfin: SPORT peripheral interface driver
Cliff Cai [Fri, 5 Sep 2008 10:21:35 +0000 (18:21 +0800)]
sound: ASoC: Blackfin: SPORT peripheral interface driver

SPORT is a serial port which can support serveral serial communication
protocols.  It can be used as I2C/PCM/AC97. For further information,
please look up the HRM.

[Additional coding standards fixes by Mark Brown.]

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC codec: SSM2602 audio codec driver
Cliff Cai [Fri, 5 Sep 2008 10:09:57 +0000 (18:09 +0800)]
sound: ASoC codec: SSM2602 audio codec driver

[Some checkpatch fixups done by Mark Brown.]

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Convert wm8510 to a new-style i2c driver
Jean Delvare [Tue, 2 Sep 2008 15:07:30 +0000 (17:07 +0200)]
sound: ASoC: Convert wm8510 to a new-style i2c driver

Convert the wm8510 codec driver to the new (standard) device
driver binding model.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Geoffrey Wossum <gwossum@acm.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Convert neo1973/lm4857 to a new-style i2c driver
Jean Delvare [Mon, 1 Sep 2008 15:46:57 +0000 (17:46 +0200)]
sound: ASoC: Convert neo1973/lm4857 to a new-style i2c driver

Convert the lm4857 driver in neo1973_wm8753 to the new (standard)
i2c device driver binding model. I assumed that the LM4857 was always
on the same I2C bus as the WM8753 codec.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Tim Niemeyer <reddog@mastersword.de>
Cc: Graeme Gregory <graeme@openmoko.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Convert wm8753 to a new-style i2c driver
Jean Delvare [Mon, 1 Sep 2008 15:45:34 +0000 (17:45 +0200)]
sound: ASoC: Convert wm8753 to a new-style i2c driver

Convert the wm8753 codec driver to the new (standard) i2c device
driver binding model.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Ville Syrjala <syrjala@sci.fi>
Cc: Frank Mandarino <fmandarino@endrelia.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: ASoC: Fix an error path in neo1973_wm8753
Jean Delvare [Mon, 1 Sep 2008 15:44:05 +0000 (17:44 +0200)]
sound: ASoC: Fix an error path in neo1973_wm8753

The error handling in neo1973_init is incorrect:

* If platform_device_add fails, we go on with the rest of the
  initialization instead of bailing out. Things will break when the
  module is removed (platform_device_unregister called on a device
  that wasn't registered.)

* If i2c_add_driver fails, we return an error so the module will not
  load, but we don't unregister neo1973_snd_device, so we are leaking
  resources.

Add the missing error handling.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Cc: Tim Niemeyer <reddog@mastersword.de>
Cc: Graeme Gregory <graeme@openmoko.org>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agosound: remove reference to dead sound OSS vars AEDSP16_MSS and SBPRO
Robert P. J. Day [Fri, 5 Sep 2008 07:16:38 +0000 (09:16 +0200)]
sound: remove reference to dead sound OSS vars AEDSP16_MSS and SBPRO

Remove the Kconfig definitions of unused variables AEDSP16_MSS and
AEDSP16_SBPRO since they're:

1) unused, and
2) referenced incorrectly anyway.

Signed-off-by: Robert P. J. Day <rpjday@crashcourse.ca>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: us122l - Add missing dependency on CONFIG_SND_HWDEP
Randy Dunlap [Fri, 5 Sep 2008 03:28:13 +0000 (20:28 -0700)]
ALSA: us122l - Add missing dependency on CONFIG_SND_HWDEP

CONFIG_SND_USB_US122L uses snd_hwdep_new(), so SND_HWDEP needs
to be enabled (selected).

ERROR: "snd_hwdep_new" [sound/usb/usx2y/snd-usb-us122l.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ASoC codec: fix compiling error in ad1980 driver after ASoC API changed
Cliff Cai [Thu, 4 Sep 2008 08:25:54 +0000 (16:25 +0800)]
ALSA: ASoC codec: fix compiling error in ad1980 driver after ASoC API changed

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: remove stale files
Takashi Iwai [Thu, 4 Sep 2008 07:20:40 +0000 (09:20 +0200)]
ALSA: remove stale files

Empty files remained likely due to wrong patching.
Remove them now.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda - allow probing of 4 codecs
Takashi Iwai [Wed, 3 Sep 2008 14:00:44 +0000 (16:00 +0200)]
ALSA: hda - allow probing of 4 codecs

Allow probing of 4 codecs on known good situations.
On some known bad situations, it should be avoided.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: add dummy function to support shared mmap in nommu Blackfin arch
Cliff Cai [Wed, 3 Sep 2008 08:54:36 +0000 (10:54 +0200)]
ALSA: add dummy function to support shared mmap in nommu Blackfin arch

Cc: Mike Frysinger <vapier.adi@gmail.com>
Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ASoC: Don't suggest compile time selection of codec access
Mark Brown [Mon, 1 Sep 2008 17:47:04 +0000 (18:47 +0100)]
ALSA: ASoC: Don't suggest compile time selection of codec access

Currently the boiler plate code used by most ASoC codecs to provide a
placeholder for SPI access suggests making the selection of SPI a
compile time option which is suboptimal when trying to build kernels
supporting multiple systems.  Change this template to suggest allowing
runtime selection instead.

Leave the drivers not yet converted to new style I2C access for now to
avoid collisions.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ASoC: Add SPI support for WM8731
Cliff Cai [Mon, 1 Sep 2008 17:47:03 +0000 (18:47 +0100)]
ALSA: ASoC: Add SPI support for WM8731

[Modified to allow runtime selection between I2C and SPI and to select
SPI_MASTER for all codecs build so this is included. -- broonie]

Signed-off-by: Cliff Cai <cliff.cai@analog.com>
Signed-off-by: Bryan Wu <cooloney@kernel.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ASoC: Convert wm8990 to a new-style i2c driver
Jean Delvare [Mon, 1 Sep 2008 17:47:02 +0000 (18:47 +0100)]
ALSA: ASoC: Convert wm8990 to a new-style i2c driver

Convert the wm8990 codec driver to the new (standard) device driver
binding model. After this change, WM8990 devices are no longer
discovered automatically and must instead be instantiated explicitly.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ASoC: Convert wm8731 to a new-style i2c driver
Jean Delvare [Mon, 1 Sep 2008 17:47:01 +0000 (18:47 +0100)]
ALSA: ASoC: Convert wm8731 to a new-style i2c driver

Convert the wm8731 codec driver to the new (standard) device driver
binding model.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Tested-by: Manuel Lauss <mano@roarinelk.homelinux.net>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ASoC: Convert wm8750 to a new-style i2c driver
Jean Delvare [Mon, 1 Sep 2008 17:47:00 +0000 (18:47 +0100)]
ALSA: ASoC: Convert wm8750 to a new-style i2c driver

Convert the wm8750 codec driver to the new (standard) device driver
binding model.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ASoC: Convert ak4535 to a new-style i2c driver
Jean Delvare [Mon, 1 Sep 2008 17:46:59 +0000 (18:46 +0100)]
ALSA: ASoC: Convert ak4535 to a new-style i2c driver

Convert the ak4535 codec driver to the new (standard) device driver
binding model. After this change, AK4535 devices are no longer
discovered automatically and must instead be instantiated explicitly.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ASoC: Convert uda1380 to a new-style i2c driver
Jean Delvare [Mon, 1 Sep 2008 17:46:58 +0000 (18:46 +0100)]
ALSA: ASoC: Convert uda1380 to a new-style i2c driver

Convert the uda1380 codec driver to the new (standard) device driver
binding model.

Signed-off-by: Jean Delvare <khali@linux-fr.org>
Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ASoC: Make all codecs depend on rather than selecting I2C
Mark Brown [Mon, 1 Sep 2008 17:46:57 +0000 (18:46 +0100)]
ALSA: ASoC: Make all codecs depend on rather than selecting I2C

The I2C layer uses I/O operations that aren't available on all
architectures and since select bypasses Kconfig dependency checking
selecting I2C breaks builds like allmodconfig on some architectures.

Signed-off-by: Mark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: harmony - fix a typo
Takashi Iwai [Mon, 1 Sep 2008 17:45:58 +0000 (19:45 +0200)]
ALSA: harmony - fix a typo

Fix a typo in the patch to remove snd_assert().

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: aaci - Fix NULL test at error path
Takashi Iwai [Mon, 1 Sep 2008 13:31:50 +0000 (15:31 +0200)]
ALSA: aaci - Fix NULL test at error path

The original fix by Julien Brunel <brunel@diku.dk>.

aaci_init_card() returns a pointer with ERR_PTR(), but in aaci_init()
NULL is supposed at this error path.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: intel8x0 - use snd_pci_quirk for clock list
Takashi Iwai [Mon, 1 Sep 2008 12:25:08 +0000 (14:25 +0200)]
ALSA: intel8x0 - use snd_pci_quirk for clock list

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: Documentation/sound/alsa/ALSA-Configuration.txt: fix typo
Michael Kerrisk [Mon, 1 Sep 2008 12:03:50 +0000 (14:03 +0200)]
ALSA: Documentation/sound/alsa/ALSA-Configuration.txt: fix typo

As noted by Gu Rui in http://bugzilla.kernel.org/show_bug.cgi?id=11444,
there is a typo in Documentation/sound/alsa/ALSA-Configuration.txt.
After checking the source (sound/pci/hda/hda_intel.c), the report
looks correct to me.

Signed-off-by: Michael Kerrisk <mtk.manpages@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: hda - Add model for Toshiba L305 laptop
Travis Place [Mon, 1 Sep 2008 06:24:00 +0000 (08:24 +0200)]
ALSA: hda - Add model for Toshiba L305 laptop

Added Subsystem IDs (0x1179, 0xff64) for the Toshiba Satellite L305
laptop, so it automatically uses the ALC268_TOSHIBA quirk.

Signed-off-by: Travis Place <wishie@wishie.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ac97_patch make functions static
Harvey Harrison [Fri, 29 Aug 2008 20:32:00 +0000 (13:32 -0700)]
ALSA: ac97_patch make functions static

Only used in ac97_codec by including ac97_patch.c directly, effectively static

Found by sparse:
sound/pci/ac97/ac97_patch.c:3551:5: warning: symbol 'patch_vt1617a' was not declared. Should it be static?
sound/pci/ac97/ac97_patch.c:3767:5: warning: symbol 'patch_vt1618' was not declared. Should it be static?

Signed-off-by: Harvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: atiixp - Add PCI ID for SB600 (1002:4382)
Takashi Iwai [Mon, 1 Sep 2008 06:21:49 +0000 (08:21 +0200)]
ALSA: atiixp - Add PCI ID for SB600 (1002:4382)

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ice1724 - limit channels for multi-channel playback
Takashi Iwai [Fri, 29 Aug 2008 14:17:25 +0000 (16:17 +0200)]
ALSA: ice1724 - limit channels for multi-channel playback

Limit the available channels for multi-channel playback device to
the real number of channels.  Until now, always up to 8 channels
are created, which are simply useless without the real outputs.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ice1724: Enable MIDI on TerraTec PHASE 22 and PHASE 28
Vedran Miletic [Fri, 29 Aug 2008 16:31:13 +0000 (18:31 +0200)]
ALSA: ice1724: Enable MIDI on TerraTec PHASE 22 and PHASE 28

Even though MIDI was fixed on ice1724 chips a while ago, it wasn't yet
enabled for some cards as it didn't get enough testing. This was tested
with MIDI keyboard on PHASE 22 and with looping back output to input and
it works stable, so it's safe to enable it.

Besides this, there are some more minor fixes, not exactly user visible:
* added info about PHASE 28 (collected, as I don't have a card)
* added info about TS22PCI and new revisions of PHASE 22
* disable 192k on PHASE 22 as AK4524 I2S doesn't support it
* enable SPDIF reciever on PHASE 22

Signed-off-by: Vedran Miletic <rivanvx@gmail.com>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: ice1724: enable MIDI on Terratec Aureon 7.1 Universe
Maximilian Rehkopf [Fri, 29 Aug 2008 12:11:10 +0000 (14:11 +0200)]
ALSA: ice1724: enable MIDI on Terratec Aureon 7.1 Universe

This enables MIDI on Terratec Aureon 7.1 Universe cards specifically.
Apparently the other envy24ht-based Aureon cards do not have MIDI ports,
hence I added a Universe specific eeprom array.

The newer cards (Aureon 7.1 PCI / 5.1 PCI/Fun) have MIDI but use a CMI
DSP so this driver does not concern them at all.

Signed-off-by: Maximilian Rehkopf <otakon@gmx.net>
Signed-off-by: Takashi Iwai <tiwai@suse.de>
Signed-off-by: Jaroslav Kysela <perex@perex.cz>
16 years agoALSA: intel8x0: implement ac97_clock whitelist
Jaroslav Kysela [Fri, 29 Aug 2008 09:29:39 +0000 (11:29 +0200)]
ALSA: intel8x0: implement ac97_clock whitelist

The AC97 clock detection is not accurate in some cases. This patch adds
an initial whitelist for audio devices gathered from RedHat's bugzilla:

https://bugzilla.redhat.com/show_bug.cgi?id=441087

As a side effect, white-listing might speedup kernel booting (AC97 clock
measuring code is not activated).

Signed-off-by: Jaroslav Kysela <perex@perex.cz>