Wei Yongjun [Mon, 6 Nov 2017 11:11:28 +0000 (11:11 +0000)]
mlxsw: spectrum: Fix error return code in mlxsw_sp_port_create()
Fix to return a negative error code from the VID create error handling
case instead of 0, as done elsewhere in this function.
Fixes: c57529e1d5d8 ("mlxsw: spectrum: Replace vPorts with Port-VLAN")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Reviewed-by: Ido Schimmel <idosch@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Mon, 6 Nov 2017 11:12:08 +0000 (11:12 +0000)]
dpaa_eth: fix error return code in dpaa_eth_probe()
Fix to return a negative error code from the dpaa_bp_alloc() error
handling case instead of 0, as done elsewhere in this function.
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 8 Nov 2017 03:23:39 +0000 (12:23 +0900)]
Merge branch 'qdisc-RED-offload'
Jiri Pirko says:
====================
qdisc RED offload
Nogah says:
Add an offload support for RED qdisc for mlxsw driver.
The first patch adds the ability to offload RED qdisc by using
ndo_setup_tc. It gives RED three commands, to offload, change or delete
the qdisc, to get the qdisc generic stats and to get it's RED xstats.
There is no enforcement on a driver to offload or not offload the qdisc and
it is up to the driver to decide.
RED qdisc is first being created and only later graft to a parent (unless
it is a root qdisc). For that reason the return value of the offload
replace command that is called in the init process doesn't reflect actual
offload state. The offload state is determined in the dump function so it
can be reflected to the user. This function is also responsible for stats
update.
The patchses 2-3 change the name of TC_SETUP_MQPRIO & TC_SETUP_CBS to match
with the new convention of QDISC prefix.
The rest of the patchset is driver support for the qdisc. Currently only
as root qdisc that is being set on the default traffic class. It supports
only the following parameters of RED: min, max, probability and ECN mode.
Limit and burst size related params are being ignored at this moment.
---
v7->v8 internal: (external RFC->v1)
- patch 1/9:
- unite the offload and un-offload functions
- clean the OFFLOAD flag when the qdisc in not offloaded
- patch 2/9:
- minor change to avoid a conflict
- patch 5/9:
- check for bad min/max values
- clean the offloaded qdisc after a bad config call
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Nogah Frankel [Mon, 6 Nov 2017 06:23:49 +0000 (07:23 +0100)]
mlxsw: spectrum: Support general qdisc stats
Add support for ndo_setup_tc with enum tc_setup_type value of
TC_SETUP_QDISC_STATS. This call updates the generic qdisc stats from the
cache if the handle ID that is asked for matching the root qdisc ID and
fails otherwise.
Currently doesn't support qlen and rqueues.
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nogah Frankel [Mon, 6 Nov 2017 06:23:48 +0000 (07:23 +0100)]
mlxsw: spectrum: Support RED xstats
Add support for ndo_setup_tc with enum tc_setup_type value of
TC_SETUP_RED_XSTATS. This call returns the RED qdisc xstats from the cache
if the handle ID that is asked for matching the root qdisc ID and fails
otherwise.
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nogah Frankel [Mon, 6 Nov 2017 06:23:47 +0000 (07:23 +0100)]
mlxsw: spectrum: Collect tclass related stats periodically
Add more statistics to be collected from the HW periodically. These stats
are tclass based (beside ECN marked packet, that exist only port based).
They are needed to expose RED qdisc stats and xstats correctly.
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Yuval Mintz [Mon, 6 Nov 2017 06:23:46 +0000 (07:23 +0100)]
mlxsw: reg: Add ext and tc-cong counter groups
This adds the counter group definitions for 2 new counter groups
which are necessary for gaining ECN & wred counters.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nogah Frankel [Mon, 6 Nov 2017 06:23:45 +0000 (07:23 +0100)]
mlxsw: spectrum: Support RED qdisc offload
Add support for ndo_setup_tc with enum tc_setup_type value of TC_SETUP_RED.
This call sets RED qdisc on a traffic class.
This patch supports RED qdisc only as a root qdisc and set in on the
default tclass. It can be set with or without ECN.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nogah Frankel [Mon, 6 Nov 2017 06:23:44 +0000 (07:23 +0100)]
mlxsw: reg: Add cwtp & cwtpm registers
This patch adds 2 new registers:
- Congestion WRED ECN TClass Profile Register [CWTP]
- Congestion WRED ECN TClass and Pool Mapping Register [CWTPM]
These registers would later be needed to offload RED-related
functionality to the HW.
Signed-off-by: Yuval Mintz <yuvalm@mellanox.com>
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nogah Frankel [Mon, 6 Nov 2017 06:23:43 +0000 (07:23 +0100)]
net_sch: cbs: Change TC_SETUP_CBS to TC_SETUP_QDISC_CBS
Change TC_SETUP_CBS to TC_SETUP_QDISC_CBS to match the new convention..
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Acked-by: Vinicius Costa Gomes <vinicius.gomes@intel.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nogah Frankel [Mon, 6 Nov 2017 06:23:42 +0000 (07:23 +0100)]
net_sch: mqprio: Change TC_SETUP_MQPRIO to TC_SETUP_QDISC_MQPRIO
Change TC_SETUP_MQPRIO to TC_SETUP_QDISC_MQPRIO to match the new
convention.
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Nogah Frankel [Mon, 6 Nov 2017 06:23:41 +0000 (07:23 +0100)]
net_sch: red: Add offload ability to RED qdisc
Add the ability to offload RED qdisc by using ndo_setup_tc.
There are four commands for RED offloading:
* TC_RED_SET: handles set and change.
* TC_RED_DESTROY: handle qdisc destroy.
* TC_RED_STATS: update the qdiscs counters (given as reference)
* TC_RED_XSTAT: returns red xstats.
Whether RED is being offloaded is being determined every time dump action
is being called because parent change of this qdisc could change its
offload state but doesn't require any RED function to be called.
Signed-off-by: Nogah Frankel <nogahf@mellanox.com>
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Lawrence Brakmo [Mon, 6 Nov 2017 02:44:10 +0000 (18:44 -0800)]
bpf: Rename tcp_bbf.readme to tcp_bpf.readme
The original patch had the wrong filename.
Fixes: bfdf75693875 ("bpf: create samples/bpf/tcp_bpf.readme")
Signed-off-by: Lawrence Brakmo <brakmo@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 8 Nov 2017 02:21:28 +0000 (11:21 +0900)]
Merge branch 'ila-make-identifier-format-optional-and-other-fixes'
Tom Herbert says:
====================
ila: make identifier format optional and other fixes
The identifier type and checksum neutral mapping bits are optional
in identifier formats. This patch set fixes the implementation to
make them optional and configurable.
Specific items:
- Clean up checksum diff code in ILA
- Add checksum neutral mapping auto so that checksum neutral
mapping can be configured without requiring use of the C-bit
- Add identifier type configuration and allow identifier
type to be configured so that the identifier type field does
not need to be present
- Added ILA documention: ila.txt
I have fixes for ILA in iproute2 that will be poseted separately.
Tested: Ran netperf TCP_RR on various combinations of checksum
mode and the two supported identifier types.
v2:
- Add proper sign off
- In ILA LWT, only check prefix length includes identifier type
if identifier type is enabled (ILA_ATYPE_USE_FORMAT).
- Add a hook type so that it can be specified whether ILA
translation is done on input or output route funciton in
LWT.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Sun, 5 Nov 2017 23:58:26 +0000 (15:58 -0800)]
ila: Add ila.txt
Add documenation for kernel ILA. This describes ILA, features,
configuration gives some examples.
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Sun, 5 Nov 2017 23:58:25 +0000 (15:58 -0800)]
ila: Add a hook type for LWT routes
In LWT tunnels both an input and output route method is defined.
If both of these are executed in the same path then double translation
happens and the effect is not correct.
This patch adds a new attribute that indicates the hook type. Two
values are defined for route output and route output. ILA
translation is only done for the one that is set. The default is
to enable ILA on route output.
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Sun, 5 Nov 2017 23:58:24 +0000 (15:58 -0800)]
ila: allow configuration of identifier type
Allow identifier to be explicitly configured for a mapping.
This can either be one of the identifier types specified in the
ILA draft or a value of ILA_ATYPE_USE_FORMAT which means the
identifier type is inferred from the identifier type field.
If a value other than ILA_ATYPE_USE_FORMAT is set for a
mapping then it is assumed that the identifier type field is
not present in an identifier.
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Sun, 5 Nov 2017 23:58:23 +0000 (15:58 -0800)]
ila: add checksum neutral map auto
Add checksum neutral auto that performs checksum neutral mapping
without using the C-bit. This is enabled by configuration of
a mapping.
The checksum neutral function has been split into
ila_csum_do_neutral_fmt and ila_csum_do_neutral_nofmt. The former
handles the C-bit and includes it in the adjustment value. The latter
just sets the adjustment value on the locator diff only.
Added configuration for checksum neutral map aut in ila_lwt
and ila_xlat.
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tom Herbert [Sun, 5 Nov 2017 23:58:22 +0000 (15:58 -0800)]
ila: cleanup checksum diff
Consolidate computing checksum diff into one function.
Add get_csum_diff_iaddr that computes the checksum diff between
an address argument and locator being written. get_csum_diff
calls this using the destination address in the IP header as
the argument.
Also moved ila_init_saved_csum to be close to the checksum
diff functions.
Signed-off-by: Tom Herbert <tom@quantonium.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Christina Jacob [Sun, 5 Nov 2017 03:22:30 +0000 (08:52 +0530)]
xdp: Sample xdp program implementing ip forward
Implements port to port forwarding with route table and arp table
lookup for ipv4 packets using bpf_redirect helper function and
lpm_trie map.
Signed-off-by: Christina Jacob <Christina.Jacob@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Troy Kisky [Fri, 3 Nov 2017 17:29:59 +0000 (10:29 -0700)]
net: fec: Let fec_ptp have its own interrupt routine
This is better for code locality and should slightly
speed up normal interrupts.
This also allows PPS clock output to start working for
i.mx7. This is because i.mx7 was already using the limit
of 3 interrupts, and needed another.
Signed-off-by: Troy Kisky <troy.kisky@boundarydevices.com>
Acked-by: Fugang Duan <fugang.duan@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Wed, 8 Nov 2017 01:28:54 +0000 (10:28 +0900)]
Merge branch 'hv_netvsc-fix-a-hang-on-channel-mtu-changes'
Vitaly Kuznetsov says:
====================
hv_netvsc: fix a hang on channel/mtu changes
It was found that netvsc driver doesn't survive e.g.
test. I was able to identify a hang in guest/host communication, it is
fixed by PATCH1 of this series. PATCH2 is a cosmetic change masking
unneeded messages.
Changes since v1:
- Throw away patches 2 and 3 of the original series as one is unneeded and
the other is not justified [Eric Dumazet, Stephen Hemminger] so I'm only
fixing the hang now, the crash doesn't reproduce. Will keep an eye on it.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vitaly Kuznetsov [Thu, 2 Nov 2017 10:35:31 +0000 (11:35 +0100)]
hv_netvsc: hide warnings about uninitialized/missing rndis device
Hyper-V hosts are known to send RNDIS messages even after we halt the
device in rndis_filter_halt_device(). Remove user visible messages
as they are not really useful.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vitaly Kuznetsov [Thu, 2 Nov 2017 10:35:30 +0000 (11:35 +0100)]
hv_netvsc: netvsc_teardown_gpadl() split
It was found that in some cases host refuses to teardown GPADL for send/
receive buffers (probably when some work with these buffere is scheduled or
ongoing). Change the teardown logic to be:
1) Send NVSP_MSG1_TYPE_REVOKE_* messages
2) Close the channel
3) Teardown GPADLs.
This seems to work reliably.
Signed-off-by: Vitaly Kuznetsov <vkuznets@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maciej S. Szmigiero [Wed, 1 Nov 2017 23:49:18 +0000 (00:49 +0100)]
net: phy: leds: Add support for "link" trigger
Currently, we create a LED trigger for any link speed known to a PHY.
These triggers only fire when their exact link speed had been negotiated
(they aren't cumulative, that is, they don't fire for "their or any higher"
link speed).
What we are missing, however, is a trigger which will fire on any link
speed known to the PHY. Such trigger can then be used for implementing a
poor man's substitute of the "link" LED on boards that lack it.
Let's add it.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Maciej S. Szmigiero [Wed, 1 Nov 2017 23:48:45 +0000 (00:48 +0100)]
net: phy: leds: Refactor "no link" handler into a separate function
Currently, phy_led_trigger_change_speed() is handling a "no link" condition
like it was some kind of an error (using "goto" to a code at the function
end).
However, having no link at PHY is an ordinary operational state, so let's
handle it in an appropriately named separate function so it is more obvious
what the code is doing.
Signed-off-by: Maciej S. Szmigiero <mail@maciej.szmigiero.name>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Mon, 6 Nov 2017 22:13:29 +0000 (14:13 -0800)]
ipv6: addrconf: fix a lockdep splat
Fixes a case where GFP_ATOMIC allocation must be used instead of
GFP_KERNEL one.
[ 54.891146] lock_acquire+0xb3/0x2f0
[ 54.891153] ? fs_reclaim_acquire.part.60+0x5/0x30
[ 54.891165] fs_reclaim_acquire.part.60+0x29/0x30
[ 54.891170] ? fs_reclaim_acquire.part.60+0x5/0x30
[ 54.891178] kmem_cache_alloc_trace+0x3f/0x500
[ 54.891186] ? cyc2ns_read_end+0x1e/0x30
[ 54.891196] ipv6_add_addr+0x15a/0xc30
[ 54.891217] ? ipv6_create_tempaddr+0x2ea/0x5d0
[ 54.891223] ipv6_create_tempaddr+0x2ea/0x5d0
[ 54.891238] ? manage_tempaddrs+0x195/0x220
[ 54.891249] ? addrconf_prefix_rcv_add_addr+0x1c0/0x4f0
[ 54.891255] addrconf_prefix_rcv_add_addr+0x1c0/0x4f0
[ 54.891268] addrconf_prefix_rcv+0x2e5/0x9b0
[ 54.891279] ? neigh_update+0x446/0xb90
[ 54.891298] ? ndisc_router_discovery+0x5ab/0xf00
[ 54.891303] ndisc_router_discovery+0x5ab/0xf00
[ 54.891311] ? retint_kernel+0x2d/0x2d
[ 54.891331] ndisc_rcv+0x1b6/0x270
[ 54.891340] icmpv6_rcv+0x6aa/0x9f0
[ 54.891345] ? ipv6_chk_mcast_addr+0x176/0x530
[ 54.891351] ? do_csum+0x17b/0x260
[ 54.891360] ip6_input_finish+0x194/0xb20
[ 54.891372] ip6_input+0x5b/0x2c0
[ 54.891380] ? ip6_rcv_finish+0x320/0x320
[ 54.891389] ip6_mc_input+0x15a/0x250
[ 54.891396] ipv6_rcv+0x772/0x1050
[ 54.891403] ? consume_skb+0xbe/0x2d0
[ 54.891412] ? ip6_make_skb+0x2a0/0x2a0
[ 54.891418] ? ip6_input+0x2c0/0x2c0
[ 54.891425] __netif_receive_skb_core+0xa0f/0x1600
[ 54.891436] ? process_backlog+0xac/0x400
[ 54.891441] process_backlog+0xfa/0x400
[ 54.891448] ? net_rx_action+0x145/0x1130
[ 54.891456] net_rx_action+0x310/0x1130
[ 54.891524] ? RTUSBBulkReceive+0x11d/0x190 [mt7610u_sta]
[ 54.891538] __do_softirq+0x140/0xaba
[ 54.891553] irq_exit+0x10b/0x160
[ 54.891561] do_IRQ+0xbb/0x1b0
Fixes: f3d9832e56c4 ("ipv6: addrconf: cleanup locking in ipv6_add_addr")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Valdis Kletnieks <valdis.kletnieks@vt.edu>
Acked-by: David Ahern <dsahern@gmail.com>
Tested-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 5 Nov 2017 14:26:51 +0000 (23:26 +0900)]
Merge branch 'eBPF-based-device-cgroup-controller'
Roman Gushchin says:
====================
eBPF-based device cgroup controller
This patchset introduces an eBPF-based device controller for cgroup v2.
Patches (1) and (2) are a preparational work required to share some code
with the existing device controller implementation.
Patch (3) is the main patch, which introduces a new bpf prog type
and all necessary infrastructure.
Patch (4) moves cgroup_helpers.c/h to use them by patch (4).
Patch (5) implements an example of eBPF program which controls access
to device files and corresponding userspace test.
v3:
Renamed constants introduced by patch (3) to BPF_DEVCG_*
v2:
Added patch (1).
v1:
https://lkml.org/lkml/2017/11/1/363
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Gushchin [Sun, 5 Nov 2017 13:15:34 +0000 (08:15 -0500)]
selftests/bpf: add a test for device cgroup controller
Add a test for device cgroup controller.
The test loads a simple bpf program which logs all
device access attempts using trace_printk() and forbids
all operations except operations with /dev/zero and
/dev/urandom.
Then the test creates and joins a test cgroup, and attaches
the bpf program to it.
Then it tries to perform some simple device operations
and checks the result:
create /dev/null (should fail)
create /dev/zero (should pass)
copy data from /dev/urandom to /dev/zero (should pass)
copy data from /dev/urandom to /dev/full (should fail)
copy data from /dev/random to /dev/zero (should fail)
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Gushchin [Sun, 5 Nov 2017 13:15:33 +0000 (08:15 -0500)]
bpf: move cgroup_helpers from samples/bpf/ to tools/testing/selftesting/bpf/
The purpose of this move is to use these files in bpf tests.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Gushchin [Sun, 5 Nov 2017 13:15:32 +0000 (08:15 -0500)]
bpf, cgroup: implement eBPF-based device controller for cgroup v2
Cgroup v2 lacks the device controller, provided by cgroup v1.
This patch adds a new eBPF program type, which in combination
of previously added ability to attach multiple eBPF programs
to a cgroup, will provide a similar functionality, but with some
additional flexibility.
This patch introduces a BPF_PROG_TYPE_CGROUP_DEVICE program type.
A program takes major and minor device numbers, device type
(block/character) and access type (mknod/read/write) as parameters
and returns an integer which defines if the operation should be
allowed or terminated with -EPERM.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Acked-by: Tejun Heo <tj@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Gushchin [Sun, 5 Nov 2017 13:15:31 +0000 (08:15 -0500)]
device_cgroup: prepare code for bpf-based device controller
This is non-functional change to prepare the device cgroup code
for adding eBPF-based controller for cgroups v2.
The patch performs the following changes:
1) __devcgroup_inode_permission() and devcgroup_inode_mknod()
are moving to the device-cgroup.h and converting into static inline.
2) __devcgroup_check_permission() is exported.
3) devcgroup_check_permission() wrapper is introduced to be used
by both existing and new bpf-based implementations.
Signed-off-by: Roman Gushchin <guro@fb.com>
Acked-by: Tejun Heo <tj@kernel.org>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
Roman Gushchin [Sun, 5 Nov 2017 13:15:30 +0000 (08:15 -0500)]
device_cgroup: add DEVCG_ prefix to ACC_* and DEV_* constants
Rename device type and access type constants defined in
security/device_cgroup.c by adding the DEVCG_ prefix.
The reason behind this renaming is to make them global namespace
friendly, as they will be moved to the corresponding header file
by following patches.
Signed-off-by: Roman Gushchin <guro@fb.com>
Cc: David S. Miller <davem@davemloft.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Alexei Starovoitov <ast@kernel.org>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 5 Nov 2017 14:25:02 +0000 (23:25 +0900)]
Merge tag 'mlx5-updates-2017-11-04' of git://git./linux/kernel/git/saeed/linux
Saeed Mahameed says:
====================
mlx5-updates-2017-11-04
This series includes:
From Huy: dscp to priority mapping for Ethernet packet.
===================================================
First six patches enable differentiated services code point (dscp) to
priority mapping for Ethernet packet. Once this feature is
enabled, the packet is routed to the corresponding priority based on its
dscp. User can combine this feature with priority flow control (pfc)
feature to have priority flow control based on the dscp.
Firmware interface:
Mellanox firmware provides two control knobs for this feature:
QPTS register allow changing the trust state between dscp and
pcp mode. The default is pcp mode. Once in dscp mode, firmware will
route the packet based on its dscp value if the dscp field exists.
QPDPM register allow mapping a specific dscp (0 to 63) to a
specific priority (0 to 7). By default, all the dscps are mapped to
priority zero.
Software interface:
This feature is controlled via application priority TLV. IEEE
specification P802.1Qcd/D2.1 defines priority selector id 5 for
application priority TLV. This APP TLV selector defines DSCP to priority
map. This APP TLV can be sent by the switch or can be set locally using
software such as lldptool. In mlx5 drivers, we add the support for net
dcb's getapp and setapp call back. Mlx5 driver only handles the selector
id 5 application entry (dscp application priority application entry).
If user sends multiple dscp to priority APP TLV entries on the same
dscp, the last sent one will take effect. All the previous sent will be
deleted.
The firmware trust state (in QPTS register) is changed based on the
number of dscp to priority application entries. When the first dscp to
priority application entry is added by the user, the trust state is
changed to dscp. When the last dscp to priority application entry is
deleted by the user, the trust state is changed to pcp.
When the port is in DSCP trust state, the transmit queue is selected
based on the dscp of the skb.
When the port is in DSCP trust state and vport inline mode is not NONE,
firmware requires mlx5 driver to copy the IP header to the
wqe ethernet segment inline header if the skb has it.
This is done by changing the transmit queue sq's min inline mode to L3.
Note that the min inline mode of sqs that belong to other features
such as xdpsq, icosq are not modified.
===================================================
Plus to the dscp series, some small misc changes are include as well:
From Inbar, Ethtool msglvl support and some debug prints in DCBNL logic
From Or Gerlitz, Enlarge the NIC TC offload table size
From Rabie, Initialize destination_flow struct to 0
From Feras, Add inner TTC table to IPoIB flow steering
From Tal, Enable CQE based moderation on TX CQ
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 5 Nov 2017 14:23:27 +0000 (23:23 +0900)]
Merge branch 'nfp-ethtool-and-related-improvements'
Simon Horman says:
====================
nfp: ethtool and related improvements
Dirk van der Merwe says:
This patch series throws a couple of loosely related items into a single
series.
Patch 1: Clang compilation fix reported by
Matthias Kaehlcke <mka@chromium.org>
Patch 2: Driver can now do MAC reinit on load when there has been a
media override set in the NSP.
Patch 3: Refactor the nfp_app_reprs_set API.
Patch 4: Similar to vNICs, representors must be able to deal with media
override changes in the NSP.
Patch 5: Since representors can now handle media overrides, we can
allocate the get/set link ndo's to them.
Patch 6 & 7: Add support for FEC mode modification.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Dirk van der Merwe [Sat, 4 Nov 2017 15:49:00 +0000 (16:49 +0100)]
nfp: implement ethtool FEC mode settings
Add support in the driver ethtool ops to modify the NFP FEC modes.
The FEC modes can be set for vNIC associated with physical ports or
for MAC representor netdevs.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dirk van der Merwe [Sat, 4 Nov 2017 15:48:59 +0000 (16:48 +0100)]
nfp: add helpers for FEC support
Implement helpers to determine and modify FEC modes via the NSP.
The NSP advertises FEC capabilities on a per port basis and provides
support for:
* Auto mode selection
* Reed Solomon
* BaseR
* None/Off
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dirk van der Merwe [Sat, 4 Nov 2017 15:48:58 +0000 (16:48 +0100)]
nfp: add get/set link settings ndos to representors
Since it is now safe to modify link settings for representors, we can
attach the get/set link settings ndos to it. The get/set link settings
are nfp_port based operations.
If a port becomes invalid, the representor will be removed in the same
way a vnic would be.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dirk van der Merwe [Sat, 4 Nov 2017 15:48:57 +0000 (16:48 +0100)]
nfp: resync repr state when port table sync
If the NSP port table has been refreshed, resync the representor state
with the new port information. At the moment, this only entails looking
for invalid ports and killing off representors associated with them.
The repr instance becomes NULL which is safe since the app accessor
function for reprs returns NULL when it cannot access a repr.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Dirk van der Merwe [Sat, 4 Nov 2017 15:48:56 +0000 (16:48 +0100)]
nfp: refactor nfp_app_reprs_set
The criteria that reprs cannot be replaced with another new set of reprs
has been removed. This check is not needed since the only use case that
could exercise this at the moment, would be to modify the number of
SRIOV VFs without first disabling them. This case is explicitly
disallowed in any case and subsequent patches in this series
need to be able to replace the running set of reprs.
All cases where the return code used to be checked for the
nfp_app_reprs_set function have been removed.
As stated above, it is not possible for the current code to encounter a
case where reprs exist and need to be replaced.
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sat, 4 Nov 2017 15:48:55 +0000 (16:48 +0100)]
nfp: make use of MAC reinit
Recent management FW images can perform full reinit of MAC cores
without requiring a reboot. When loading the driver check if there
are changes pending and if so call NSP MAC reinit. Full application
FW reload is still required, and all MACs need to be reinited at the
same time (not only the ones which have been reconfigured, and thus
potentially causing disruption to unrelated netdevs) therefore for
now changing MAC config without reloading the driver still remains
future work.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Tested-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Sat, 4 Nov 2017 15:48:54 +0000 (16:48 +0100)]
nfp: don't depend on compiler constant propagation
Matthias reports:
nfp_eth_set_bit_config() is marked as __always_inline to allow gcc to
identify the 'mask' parameter as known to be constant at compile time,
which is required to use the FIELD_GET() macro.
The forced inlining does the trick for gcc, but for kernel builds with
clang it results in undefined symbols:
drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp_eth.o: In function
`__nfp_eth_set_aneg':
drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp_eth.c:(.text+0x787):
undefined reference to `__compiletime_assert_492'
drivers/net/ethernet/netronome/nfp/nfpcore/nfp_nsp_eth.c:(.text+0x7b1):
undefined reference to `__compiletime_assert_496'
These __compiletime_assert_xyx() calls would have been optimized away
if
the compiler had seen 'mask' as a constant.
Add a macro to extract the mask and shift and pass those to
nfp_eth_set_bit_config() separately.
Reported-by: Matthias Kaehlcke <mka@chromium.org>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Tested-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: Simon Horman <simon.horman@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Priyaranjan Jha [Fri, 3 Nov 2017 23:38:48 +0000 (16:38 -0700)]
tcp: higher throughput under reordering with adaptive RACK reordering wnd
Currently TCP RACK loss detection does not work well if packets are
being reordered beyond its static reordering window (min_rtt/4).Under
such reordering it may falsely trigger loss recoveries and reduce TCP
throughput significantly.
This patch improves that by increasing and reducing the reordering
window based on DSACK, which is now supported in major TCP implementations.
It makes RACK's reo_wnd adaptive based on DSACK and no. of recoveries.
- If DSACK is received, increment reo_wnd by min_rtt/4 (upper bounded
by srtt), since there is possibility that spurious retransmission was
due to reordering delay longer than reo_wnd.
- Persist the current reo_wnd value for TCP_RACK_RECOVERY_THRESH (16)
no. of successful recoveries (accounts for full DSACK-based loss
recovery undo). After that, reset it to default (min_rtt/4).
- At max, reo_wnd is incremented only once per rtt. So that the new
DSACK on which we are reacting, is due to the spurious retx (approx)
after the reo_wnd has been updated last time.
- reo_wnd is tracked in terms of steps (of min_rtt/4), rather than
absolute value to account for change in rtt.
In our internal testing, we observed significant increase in throughput,
in scenarios where reordering exceeds min_rtt/4 (previous static value).
Signed-off-by: Priyaranjan Jha <priyarjha@google.com>
Signed-off-by: Yuchung Cheng <ycheng@google.com>
Signed-off-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 5 Nov 2017 13:31:39 +0000 (22:31 +0900)]
Merge branch 'dsa-parsing-stage'
Vivien Didelot says:
====================
net: dsa: parsing stage
When registering a DSA switch, there is basically two stages.
The first stage is the parsing of the switch device, from either device
tree or platform data. It fetches the DSA tree to which it belongs, and
validates its ports. The switch device is then added to the tree, and
the second stage is called if this was the last switch of the tree.
The second stage is the setup of the tree, which validates that the tree
is complete, sets up the routing tables, the default CPU port for user
ports, sets up the switch drivers and finally the master interfaces,
which makes the whole switch fabric functional.
This patch series covers the first parsing stage. It fixes the type of
the switch and tree indexes to unsigned int, simplifies the tree
reference counting and the switch and CPU ports parsing.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 3 Nov 2017 23:05:30 +0000 (19:05 -0400)]
net: dsa: resolve tagging protocol at parse time
Extend the dsa_port_parse_cpu() function to resolve the tagging protocol
at port parsing time, instead of waiting for the whole tree to be
complete.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 3 Nov 2017 23:05:29 +0000 (19:05 -0400)]
net: dsa: add one port parsing function per type
Add dsa_port_parse_user, dsa_port_parse_dsa and dsa_port_parse_cpu
functions to factorize the code shared by both OF and pdata parsing.
They don't do much for the moment but will be extended later to support
tagging protocol resolution for example.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 3 Nov 2017 23:05:28 +0000 (19:05 -0400)]
net: dsa: only check presence of link property
When parsing a port, simply use of_property_read_bool which checks the
presence of a given property, instead of parsing the link phandle.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 3 Nov 2017 23:05:27 +0000 (19:05 -0400)]
net: dsa: rework switch parsing
When parsing a switch, we have to identify to which tree it belongs and
parse its ports. Provide two functions to separate the OF and platform
data specific paths.
Also use the of_property_read_variable_u32_array function to parse the
OF member array instead of calling of_property_read_u32_index twice.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 3 Nov 2017 23:05:26 +0000 (19:05 -0400)]
net: dsa: get tree before parsing ports
We will need a reference to the dsa_switch_tree when parsing a CPU port,
so fetch it right after parsing the member and before parsing ports.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 3 Nov 2017 23:05:25 +0000 (19:05 -0400)]
net: dsa: rework switch addition and removal
This patch removes the unnecessary index argument from the
dsa_dst_add_ds and dsa_dst_del_ds functions and renames them to
dsa_tree_add_switch and dsa_tree_remove_switch respectively.
In addition to a more explicit scope, we now check the presence of an
existing switch with the same index directly within dsa_tree_add_switch.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 3 Nov 2017 23:05:24 +0000 (19:05 -0400)]
net: dsa: provide a find or new tree helper
Rename dsa_get_dst to dsa_tree_find since it doesn't increment the
reference counter, rename dsa_add_dst to dsa_tree_alloc for symmetry
with dsa_tree_free, and provide a convenient dsa_tree_touch function to
find or allocate a new tree.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 3 Nov 2017 23:05:23 +0000 (19:05 -0400)]
net: dsa: get and put tree reference counting
Provide convenient dsa_tree_get and dsa_tree_put functions scoping a DSA
tree used to increment and decrement its reference counter, instead of
poking directly its kref structure.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 3 Nov 2017 23:05:22 +0000 (19:05 -0400)]
net: dsa: simplify tree reference counting
DSA trees have a refcount used to automatically free the dsa_switch_tree
structure once there is no switch devices inside of it.
The refcount is incremented when a switch is added to the tree, and
decremented when it is removed from it.
But because of kref_init, the refcount is also incremented at
initialization, and when looking up the tree from the list for symmetry.
Thus the current code stores the number of switches plus one, and makes
the switch registration more complex.
To simplify the switch registration function, we reset the refcount to
zero after initialization and don't increment it when looking up a tree.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 3 Nov 2017 23:05:21 +0000 (19:05 -0400)]
net: dsa: make tree index unsigned
Similarly to a DSA switch and port, rename the tree index from "tree" to
"index" and make it an unsigned int because it isn't supposed to be less
than 0.
u32 is an OF specific data used to retrieve the value and has no need to
be propagated up to the tree index.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vivien Didelot [Fri, 3 Nov 2017 23:05:20 +0000 (19:05 -0400)]
net: dsa: make switch index unsigned
Define the DSA switch index as an unsigned int, because it will never be
less than 0.
Signed-off-by: Vivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Intiyaz Basha [Fri, 3 Nov 2017 21:32:33 +0000 (14:32 -0700)]
liquidio: do not consider packets dropped by network stack as driver Rx dropped
netdev->rx_dropped was including packets dropped by napi_gro_receive.
If a packet is dropped by network stack, it should not be counted under
driver Rx dropped.
Made necessary changes to not include network stack drops under
netdev->rx_dropped.
Signed-off-by: Intiyaz Basha <intiyaz.basha@cavium.com>
Signed-off-by: Satanand Burla <satananda.burla@cavium.com>
Signed-off-by: Felix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Quentin Monnet [Fri, 3 Nov 2017 20:59:07 +0000 (13:59 -0700)]
tools: bpftool: move p_err() and p_info() from main.h to common.c
The two functions were declared as static inline in a header file. There
is no particular reason why they should be inlined, they just happened to
remain in the same header file when they were turned from macros to
functions in a precious commit.
Make them non-inlined functions and move them to common.c file instead.
Suggested-by: Joe Perches <joe@perches.com>
Signed-off-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Acked-by: Alexei Starovoitov <ast@kernel.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 5 Nov 2017 13:26:20 +0000 (22:26 +0900)]
Merge branch 'bpf-add-offload-as-a-first-class-citizen'
Jakub Kicinski says:
====================
bpf: add offload as a first class citizen
This series is my stab at what was discussed at a recent IOvisor
bi-weekly call. The idea is to make the device translator run at
the program load time. This makes the offload more explicit to
the user space. It also makes it easy for the device translator
to insert information into the original verifier log.
v2:
- include linux/bug.h instead of asm/bug.h;
- rebased on top of Craig's verifier fix (no changes, the last patch
just removes more code now). I checked the set doesn't conflict
with Jiri's, Josef's or Roman's patches, but missed Craig's fix :(
v1:
- rename the ifindex member on load;
- improve commit messages;
- split nfp patches more.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Nov 2017 20:56:30 +0000 (13:56 -0700)]
bpf: remove old offload/analyzer
Thanks to the ability to load a program for a specific device,
running verifier twice is no longer needed.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Nov 2017 20:56:29 +0000 (13:56 -0700)]
nfp: bpf: move to new BPF program offload infrastructure
Following steps are taken in the driver to offload an XDP program:
XDP_SETUP_PROG:
* prepare:
- allocate program state;
- run verifier (bpf_analyzer());
- run translation;
* load:
- stop old program if needed;
- load program;
- enable BPF if not enabled;
* clean up:
- free program image.
With new infrastructure the flow will look like this:
BPF_OFFLOAD_VERIFIER_PREP:
- allocate program state;
BPF_OFFLOAD_TRANSLATE:
- run translation;
XDP_SETUP_PROG:
- stop old program if needed;
- load program;
- enable BPF if not enabled;
BPF_OFFLOAD_DESTROY:
- free program image.
Take advantage of the new infrastructure. Allocation of driver
metadata has to be moved from jit.c to offload.c since it's now
done at a different stage. Since there is no separate driver
private data for verification step, move temporary nfp_meta
pointer into nfp_prog. We will now use user space context
offsets.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Nov 2017 20:56:28 +0000 (13:56 -0700)]
nfp: bpf: move translation prepare to offload.c
struct nfp_prog is currently only used internally by the translator.
This means there is a lot of parameter passing going on, between
the translator and different stages of offload. Simplify things
by allocating nfp_prog in offload.c already.
We will now use kmalloc() to allocate the program area and only
DMA map it for the time of loading (instead of allocating DMA
coherent memory upfront).
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Nov 2017 20:56:27 +0000 (13:56 -0700)]
nfp: bpf: move program prepare and free into offload.c
Most of offload/translation prepare logic will be moved to
offload.c. To help git generate more reasonable diffs
move nfp_prog_prepare() and nfp_prog_free() functions
there as a first step.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Nov 2017 20:56:26 +0000 (13:56 -0700)]
nfp: bpf: require seamless reload for program replace
Firmware supports live replacement of programs for quite some
time now. Remove the software-fallback related logic and
depend on the FW for program replace. Seamless reload will
become a requirement if maps are present, anyway.
Load and start stages have to be split now, since replace
only needs a load, start has already been done on add.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Nov 2017 20:56:25 +0000 (13:56 -0700)]
nfp: bpf: refactor offload logic
We currently create a fake cls_bpf offload object when we want
to offload XDP. Simplify and clarify the code by moving the
TC/XDP specific logic out of common offload code. This is easy
now that we don't support legacy TC actions. We only need the
bpf program and state of the skip_sw flag.
Temporarily set @code to NULL in nfp_net_bpf_offload(), compilers
seem to have trouble recognizing it's always initialized. Next
patches will eliminate that variable.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Nov 2017 20:56:24 +0000 (13:56 -0700)]
nfp: bpf: remove unnecessary include of nfp_net.h
BPF offload's main header does not need to include nfp_net.h.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Nov 2017 20:56:23 +0000 (13:56 -0700)]
nfp: bpf: remove the register renumbering leftovers
The register renumbering was removed and will not be coming back
in its old, naive form, given that it would be fundamentally
incompatible with calling functions. Remove the leftovers.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Nov 2017 20:56:22 +0000 (13:56 -0700)]
nfp: bpf: drop support for cls_bpf with legacy actions
Only support BPF_PROG_TYPE_SCHED_CLS programs in direct
action mode. This simplifies preparing the offload since
there will now be only one mode of operation for that type
of program. We need to know the attachment mode type of
cls_bpf programs, because exit codes are interpreted
differently for legacy vs DA mode.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Nov 2017 20:56:21 +0000 (13:56 -0700)]
cls_bpf: allow attaching programs loaded for specific device
If TC program is loaded with skip_sw flag, we should allow
the device-specific programs to be accepted.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Nov 2017 20:56:20 +0000 (13:56 -0700)]
xdp: allow attaching programs loaded for specific device
Pass the netdev pointer to bpf_prog_get_type(). This way
BPF code can decide whether the device matches what the
code was loaded/translated for.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Nov 2017 20:56:19 +0000 (13:56 -0700)]
bpftool: print program device bound info
If program is bound to a device, print the name of the relevant
interface or unknown if the netdev has since been removed.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Nov 2017 20:56:18 +0000 (13:56 -0700)]
bpf: report offload info to user space
Extend struct bpf_prog_info to contain information about program
being bound to a device. Since the netdev may get destroyed while
program still exists we need a flag to indicate the program is
loaded for a device, even if the device is gone.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Nov 2017 20:56:17 +0000 (13:56 -0700)]
bpf: offload: add infrastructure for loading programs for a specific netdev
The fact that we don't know which device the program is going
to be used on is quite limiting in current eBPF infrastructure.
We have to reverse or limit the changes which kernel makes to
the loaded bytecode if we want it to be offloaded to a networking
device. We also have to invent new APIs for debugging and
troubleshooting support.
Make it possible to load programs for a specific netdev. This
helps us to bring the debug information closer to the core
eBPF infrastructure (e.g. we will be able to reuse the verifer
log in device JIT). It allows device JITs to perform translation
on the original bytecode.
__bpf_prog_get() when called to get a reference for an attachment
point will now refuse to give it if program has a device assigned.
Following patches will add a version of that function which passes
the expected netdev in. @type argument in __bpf_prog_get() is
renamed to attach_type to make it clearer that it's only set on
attachment.
All calls to ndo_bpf are protected by rtnl, only verifier callbacks
are not. We need a wait queue to make sure netdev doesn't get
destroyed while verifier is still running and calling its driver.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jakub Kicinski [Fri, 3 Nov 2017 20:56:16 +0000 (13:56 -0700)]
net: bpf: rename ndo_xdp to ndo_bpf
ndo_xdp is a control path callback for setting up XDP in the
driver. We can reuse it for other forms of communication
between the eBPF stack and the drivers. Rename the callback
and associated structures and definitions.
Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Simon Horman <simon.horman@netronome.com>
Reviewed-by: Quentin Monnet <quentin.monnet@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gustavo A. R. Silva [Fri, 3 Nov 2017 16:52:45 +0000 (11:52 -0500)]
mISDN: l1oip_core: replace _manual_ swap with swap macro
Make use of the swap macro and remove unnecessary variables skb and cnt.
This makes the code easier to read and maintain.
This code was detected with the help of Coccinelle.
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Gustavo A. R. Silva [Fri, 3 Nov 2017 14:31:53 +0000 (09:31 -0500)]
net: plip: mark expected switch fall-throughs
In preparation to enabling -Wimplicit-fallthrough, mark switch cases
where we are expecting to fall through.
Addresses-Coverity-ID: 114893
Addresses-Coverity-ID: 114894
Addresses-Coverity-ID: 114895
Addresses-Coverity-ID: 114896
Addresses-Coverity-ID: 114897
Addresses-Coverity-ID: 114898
Addresses-Coverity-ID: 114899
Addresses-Coverity-ID: 114900
Addresses-Coverity-ID: 114901
Addresses-Coverity-ID: 114902
Addresses-Coverity-ID: 114903
Addresses-Coverity-ID: 114904
Addresses-Coverity-ID: 114905
Signed-off-by: Gustavo A. R. Silva <garsilva@embeddedor.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 3 Nov 2017 13:18:59 +0000 (06:18 -0700)]
tcp: do not clear again skb->csum in tcp_init_nondata_skb()
tcp_init_nondata_skb() is fed with freshly allocated skbs.
They already have a cleared csum field, no need to clear it again.
This is based on Neal review on commit
3b11775033dc ("tcp: do not mangle
skb->cb[] in tcp_make_synack()"), noticing I did not clear skb->csum.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Fri, 3 Nov 2017 13:09:17 +0000 (06:09 -0700)]
tcp: tcp_mtu_probing() cleanup
Reduce one indentation level to make code more readable.
tcp_sync_mss() can be factorized.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: Neal Cardwell <ncardwell@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Arnd Bergmann [Fri, 3 Nov 2017 12:52:24 +0000 (13:52 +0100)]
dpaa_eth: avoid uninitialized variable false-positive warning
We can now build this driver on ARM, so I ran into a randconfig build
warning that presumably had existed on powerpc already.
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c: In function 'sg_fd_to_skb':
drivers/net/ethernet/freescale/dpaa/dpaa_eth.c:1712:18: error: 'skb' may be used uninitialized in this function [-Werror=maybe-uninitialized]
I'm slightly changing the logic here, to make it obvious to the
compiler that 'skb' is always initialized.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
David S. Miller [Sun, 5 Nov 2017 12:49:17 +0000 (21:49 +0900)]
Merge branch 'openvswitch-netns'
Flavio Leitner says:
====================
Allow openvswitch to query ports in another netns.
Today Open vSwitch users are moving internal ports to other namespaces and
although packets are flowing OK, the userspace daemon can't find out basic
information like if the port is UP or DOWN, for instance.
This patchset extends openvswitch API to retrieve the current netnsid of
a port. It will be used by the userspace daemon to find out in which netns
the port is located.
This patchset also extends the rtnetlink getlink call to accept and operate
on a given netnsid. More details are available in each patch.
====================
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Benc [Thu, 2 Nov 2017 19:04:38 +0000 (17:04 -0200)]
rtnetlink: use netnsid to query interface
Currently, when an application gets netnsid from the kernel (for example as
the result of RTM_GETLINK call on one end of the veth pair), it's not much
useful. There's no reliable way to get to the netns fd from the netnsid, nor
does any kernel API accept netnsid.
Extend the RTM_GETLINK call to also accept netnsid. It will operate on the
netns with the given netnsid in such case. Of course, the calling process
needs to have enough capabilities in the target name space; for now, require
CAP_NET_ADMIN. This can be relaxed in the future.
To signal to the calling process that the kernel understood the new
IFLA_IF_NETNSID attribute in the query, it will include it in the response.
This is needed to detect older kernels, as they will just ignore
IFLA_IF_NETNSID and query in the current name space.
This patch implemetns IFLA_IF_NETNSID only for get and dump. For set
operations, this can be extended later.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Benc [Thu, 2 Nov 2017 19:04:37 +0000 (17:04 -0200)]
openvswitch: reliable interface indentification in port dumps
This patch allows reliable identification of netdevice interfaces connected
to openvswitch bridges. In particular, user space queries the netdev
interfaces belonging to the ports for statistics, up/down state, etc.
Datapath dump needs to provide enough information for the user space to be
able to do that.
Currently, only interface names are returned. This is not sufficient, as
openvswitch allows its ports to be in different name spaces and the
interface name is valid only in its name space. What is needed and generally
used in other netlink APIs, is the pair ifindex+netnsid.
The solution is addition of the ifindex+netnsid pair (or only ifindex if in
the same name space) to vport get/dump operation.
On request side, ideally the ifindex+netnsid pair could be used to
get/set/del the corresponding vport. This is not implemented by this patch
and can be added later if needed.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Jiri Benc [Thu, 2 Nov 2017 19:04:36 +0000 (17:04 -0200)]
net: export peernet2id_alloc
It will be used by openvswitch.
Signed-off-by: Jiri Benc <jbenc@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Tal Gilboa [Tue, 26 Sep 2017 13:20:43 +0000 (16:20 +0300)]
net/mlx5e: Enable CQE based moderation on TX CQ
By using CQE based moderation on TX CQ we can reduce the number of TX
interrupt rate. Besides the benefit of less interrupts, this also
allows the kernel to better utilize TSO. Since TSO has some CPU overhead,
it might not aggregate when CPU is under high stress. By reducing the
interrupt rate and the CPU utilization, we can get better aggregation
and better overall throughput.
The feature is enabled by default and has a private flag in ethtool
for control.
Throughput, interrupt rate and TSO utilization improvements:
(ConnectX-4Lx 40GbE, unidirectional, 1/16 TCP streams, 64B packets)
---------------------------------------------------------
Metric | Streams | CQE Based | EQE Based | improvement
---------------------------------------------------------
BW | 1 | 2.4Gb/s | 2.15Gb/s | +11.6%
IR | 1 | 27Kips | 50.6Kips | -46.7%
TSO Util | 1 | 74.6% | 71% | +5%
BW | 16 | 29Gb/s | 25.85Gb/s | +12.2%
IR | 16 | 482Kips | 745Kips | -35.3%
TSO Util | 16 | 69.1% | 49% | +41.1%
*BW = Bandwidth, IR = Interrupt rate, ips = interrupt per second.
TSO Util = bytes in TSO sessions / all bytes transferred
Signed-off-by: Tal Gilboa <talgi@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Feras Daoud [Thu, 7 Sep 2017 13:05:10 +0000 (16:05 +0300)]
net/mlx5e: IPoIB, Add inner TTC table to IPoIB flow steering
For supported platforms, add inner TTC flow table to enhanced IPoIB
flow steering.
Signed-off-by: Feras Daoud <ferasda@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Rabie Loulou [Wed, 18 Oct 2017 14:58:42 +0000 (17:58 +0300)]
net/mlx5: Initialize destination_flow struct to 0
This is needed in order to enlarge it with more members that will get
value of 0 when not set.
Signed-off-by: Rabie Loulou <rabiel@mellanox.com>
Reviewed-by: Roi Dayan <roid@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Or Gerlitz [Thu, 12 Jan 2017 14:19:29 +0000 (16:19 +0200)]
net/mlx5: Enlarge the NIC TC offload table size
The NIC TC offload table size was hard coded to 1k. Change it to be
min(max NIC RX table size,
min(max flow counters, 64k) * num flow groups)
where the max values are read from the firmware and the number of
flow groups is hard-coded as before this change.
We don't know upfront the division of flows to groups (== different masks).
This setup allows each group to be of size up to the where we want to go
(when supported, all offloaded flows use counters). Thus, we don't expect
multiple occurences for a group which in turn would add steering hops.
Signed-off-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Inbar Karmy [Sun, 18 Jun 2017 06:47:35 +0000 (09:47 +0300)]
net/mlx5e: DCBNL, Add debug messages log
Add debug print when changing the configuration of QoS through dcbnl.
Use ethtool -s <devname> msglvl hw on/off to toggle debug messages.
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Reviewed-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Gal Pressman [Tue, 28 Jul 2015 06:35:31 +0000 (09:35 +0300)]
net/mlx5e: Add support for ethtool msglvl support
Use ethtool -s <devname> msglvl <type> on/off to toggle debug messages.
Signed-off-by: Gal Pressman <galp@mellanox.com>
Signed-off-by: Inbar Karmy <inbark@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Huy Nguyen [Tue, 18 Jul 2017 21:34:51 +0000 (16:34 -0500)]
net/mlx5e: Support DSCP trust state to Ethernet's IP packet on SQ
If the port is in DSCP trust state, packets are placed in the right
priority queue based on the dscp value. This is done by selecting
the transmit queue based on the dscp of the skb.
Until now select_queue honors priority only from the vlan header.
However that is not sufficient in cases where port trust state is DSCP
mode as packet might not even contain vlan header. Therefore if the port
is in dscp trust state and vport's min inline mode is not NONE,
copy the IP header to the eseg's inline header if the skb has it.
This is done by changing the transmit queue sq's min inline mode to L3.
Note that the min inline mode of sqs that belong to other features such
as xdpsq, icosq are not modified.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Huy Nguyen [Tue, 18 Jul 2017 21:23:36 +0000 (16:23 -0500)]
net/mlx5e: Add dcbnl dscp to priority support
This patch implements dcbnl hooks to set and delete DSCP to priority map
as defined by the DCB subsystem. Device maintains internal trust state
which needs to be set to DSCP state for performing DSCP to priority mapping.
When the first dscp to priority APP entry is added by the user, the
trust state is changed to dscp.
When the last dscp to priority APP entry is deleted by the user, the
trust state is changed to pcp.
If user sends multiple dscp to priority APP entries on the same dscp,
the last sent one will take effect. All the previous sent will be
deleted.
The dscp to priority APP entries are added and deleted in the net/dcb
APP database using dcb_ieee_setapp/getapp.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Huy Nguyen [Tue, 18 Jul 2017 21:08:46 +0000 (16:08 -0500)]
net/mlx5: QPTS and QPDPM register firmware command support
The QPTS register allows changing the priority trust state between pcp and
dscp. Add support to get/set trust state from device. When the port is
in pcp/dscp trust state, packet is routed by hardware to matching priority
based on its pcp/dscp value respectively.
The QPDPM register allow channing the dscp to priority mapping. Add support
to get/set dscp to priority mapping from device.
Note that to change a dscp mapping, the "e" bit of this dscp structure
must be set in the QPDPM firmware command.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Huy Nguyen [Thu, 3 Aug 2017 02:36:23 +0000 (21:36 -0500)]
net/mlx5: Add MLX5_SET16 and MLX5_GET16
Add MLX5_SET16 and MLX5_GET16 for 16bit structure field in firmware
command.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Eli Cohen <eli@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Huy Nguyen [Tue, 18 Jul 2017 21:03:17 +0000 (16:03 -0500)]
net/mlx5: QCAM register firmware command support
The QCAM register provides capability bit for all the QoS registers
using ACCESS_REG command.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Huy Nguyen [Tue, 18 Jul 2017 20:42:15 +0000 (15:42 -0500)]
net/dcb: Add dscp to priority selector type
IEEE specification P802.1Qcd/D2.1 defines priority selector 5.
This APP TLV selector defines DSCP to priority map.
This patch defines such DSCP selector.
Signed-off-by: Huy Nguyen <huyn@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Or Gerlitz <ogerlitz@mellanox.com>
Signed-off-by: Saeed Mahameed <saeedm@mellanox.com>
Eric Dumazet [Sat, 4 Nov 2017 15:53:27 +0000 (08:53 -0700)]
ipv6: remove IN6_ADDR_HSIZE from addrconf.h
IN6_ADDR_HSIZE is private to addrconf.c, move it here to avoid
confusion.
Signed-off-by: Eric Dumazet <edumazet@google.com>
Acked-by: David Ahern <dsahern@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Eric Dumazet [Sat, 4 Nov 2017 15:27:14 +0000 (08:27 -0700)]
pktgen: do not abuse IN6_ADDR_HSIZE
pktgen accidentally used IN6_ADDR_HSIZE, instead of using the size of an
IPv6 address.
Since IN6_ADDR_HSIZE recently was increased from 16 to 256, this old
bug is hitting us.
Fixes: 3f27fb23219e ("ipv6: addrconf: add per netns perturbation in inet6_addr_hash()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Colin Ian King [Fri, 3 Nov 2017 08:09:45 +0000 (08:09 +0000)]
net: sched: cls_u32: use bitwise & rather than logical && on n->flags
Currently n->flags is being operated on by a logical && operator rather
than a bitwise & operator. This looks incorrect as these should be bit
flag operations. Fix this.
Detected by CoverityScan, CID#
1460398 ("Logical vs. bitwise operator")
Fixes: 245dc5121a9b ("net: sched: cls_u32: call block callbacks for offload")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Konstantin Khlebnikov [Thu, 2 Nov 2017 14:07:05 +0000 (17:07 +0300)]
tcp_nv: use do_div() instead of expensive div64_u64()
Average RTT is 32-bit thus full 64-bit division is redundant.
Signed-off-by: Konstantin Khlebnikov <khlebnikov@yandex-team.ru>
Suggested-by: Stephen Hemminger <stephen@networkplumber.org>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Vadim Fedorenko [Thu, 2 Nov 2017 12:49:08 +0000 (15:49 +0300)]
add support of IFF_XMIT_DST_RELEASE bit in vlan
Some time ago Eric Dumazet suggested a "hack the IFF_XMIT_DST_RELEASE
flag on the vlan netdev". But the last comment was "does not support
properly bonding/team.(If the real_dev->privflags IFF_XMIT_DST_RELEASE
bit changes, we want to update all the vlans at the same time )"
I've extended that patch to support changes of IFF_XMIT_DST_RELEASE in
bonding/team.
Both bonding and team call netdev_change_features() after recalculation
of features including priv_flags IFF_XMIT_DST_RELEASE bit. So the only
thing needed to support is to recheck this bit in
vlan_transfer_features().
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: Vadim Fedorenko <vfedorenko@yandex-team.ru>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
Wei Yongjun [Thu, 2 Nov 2017 11:14:48 +0000 (11:14 +0000)]
phylink: make local function phylink_phy_change() static
Fixes the following sparse warnings:
drivers/net/phy/phylink.c:570:6: warning:
symbol 'phylink_phy_change' was not declared. Should it be static?
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>