openwrt/staging/nbd.git
8 years agoimx6: Fix pointing to msata/mmc bootdevs
Koen Vandeputte [Mon, 22 Aug 2016 15:05:11 +0000 (17:05 +0200)]
imx6: Fix pointing to msata/mmc bootdevs

Point to correct devices when booting from msata or MMC
Changes fetched from Gateworks git

Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
[Jo-Philipp Wich: rebased to apply against current LEDE version]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoipq806x: Build image for Netgear Nighthawk X4 R7500v2
Alexis Green [Fri, 19 Aug 2016 20:56:24 +0000 (13:56 -0700)]
ipq806x: Build image for Netgear Nighthawk X4 R7500v2

Signed-off-by: Alexis Green <alexis@cessp.it>
[Jo-Philipp Wich: add missing DEVICE_TITLE, fix model name in commit title]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agokernel: add fake users for udptunnel and iptunnel modules
Daniel Golle [Mon, 22 Aug 2016 15:14:03 +0000 (17:14 +0200)]
kernel: add fake users for udptunnel and iptunnel modules

Without any in-tree users enabled the Kernel's build process doesn't
actually build those modules. Enable some potential in-tree users
during Kernel build, so out-of-tree modules can depend on them.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
8 years agooxnas: drop explicit pre-init iface
Daniel Golle [Fri, 19 Aug 2016 16:22:20 +0000 (18:22 +0200)]
oxnas: drop explicit pre-init iface

According to Jonas Gorski this is no longer needed, the problem
originally addressed by first adding 07_preinit_iface and subsequently
merging that into 02_network was probably a bug during the transition
to the new board.d pre-init approach.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
8 years agokernel: bgmac: use upstream accepted patches
Rafał Miłecki [Mon, 22 Aug 2016 07:47:34 +0000 (09:47 +0200)]
kernel: bgmac: use upstream accepted patches

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agolantiq: fix building AVM/EVA sysupgrade images on NOR devices
Martin Blumenstingl [Sun, 21 Aug 2016 15:01:33 +0000 (17:01 +0200)]
lantiq: fix building AVM/EVA sysupgrade images on NOR devices

Device/AVM unconditionally inherits Device/NAND, which changes the
sysupgrade image to sysupgrade-tar (instead of a "raw" sysupgrade image
as used in the Device/Default template).
This moves the Device/NAND call to the FRITZ3370 device definition, as
this is the only AVM/EVA device that uses NAND.
Additionally we have to define the IMAGE_SIZE for the AVM/EVA NOR
devices to ensure that the images are not discarded.

Signed-off-by: Martin Blumenstingl <martin.blumenstingl@googlemail.com>
8 years agoipq806x: add usb pins to r7800 dts file
John Crispin [Mon, 15 Aug 2016 20:54:23 +0000 (22:54 +0200)]
ipq806x: add usb pins to r7800 dts file

Signed-off-by: John Crispin <john@phrozen.org>
8 years agoimx6: fix generating bootfs in imagebuilder (FS#102)
Jo-Philipp Wich [Sat, 20 Aug 2016 18:17:51 +0000 (20:17 +0200)]
imx6: fix generating bootfs in imagebuilder (FS#102)

The image builder does not bundle sub-directories within $(KERNEL_BUILD_DIR),
therfore the intermediate "ventana-uImage.boot" directory is not shipped,
leading to failures with "make image" later on.

To circumvent the issue, store the intermediate boot files as tar archive
instead of putting them into a directory to ensure that they end up in the
final image builder tarball. Fixes FS#102

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoramips: fix build of TRENDnet TEW-69xGR images
Mathias Kresin [Fri, 19 Aug 2016 23:18:51 +0000 (01:18 +0200)]
ramips: fix build of TRENDnet TEW-69xGR images

The image generation for TEW-691GR and TEW-692GR was broken since
79d02229 due to the move of the UMedia recipe to another Makefile.

Signed-off-by: Mathias Kresin <dev@kresin.me>
8 years agoramips: move umedia build step to Makefile
Mathias Kresin [Fri, 19 Aug 2016 23:17:16 +0000 (01:17 +0200)]
ramips: move umedia build step to Makefile

Some rt3883 based boards need this one as well.

Signed-off-by: Mathias Kresin <dev@kresin.me>
8 years agoramips: TEW-691GR: fix switch and wireless
Mathias Kresin [Fri, 19 Aug 2016 18:46:50 +0000 (20:46 +0200)]
ramips: TEW-691GR: fix switch and wireless

Due to the missing phy-mode setting, the switch wasn't initialised.

The wireless requires an eeprom to work. Use the same mac addresses as
the stock firmware.

Signed-off-by: Mathias Kresin <dev@kresin.me>
8 years agoramips: TEW-692GR: fix switch and wireless
Mathias Kresin [Sat, 13 Aug 2016 22:47:14 +0000 (00:47 +0200)]
ramips: TEW-692GR: fix switch and wireless

The AR8327 initvals were not copied to the DTS during the switch from
mach file to device tree and broke the switch on the device.

The former used PORT6 related initvals were wrong and have been
corrected.

The phy mode setting for the switch was missing in the DTS as well.

The wireless requires an eeprom to work. The dual band wireless chips
have both bands enabled by default but only one band per chip is
working.

The stock firmware uses the following mac addresses:

LAN:    AA:BB:CC:DD:EE:E4
WAN:    AA:BB:CC:DD:EE:E4
2.4GHz: AA:BB:CC:DD:EE:E4
5 GHz:  AA:BB:CC:DD:EE:E8

Assuming the mac address range :E4 to :E8 is reserved for this device,
the MAC addresses were reorder to have a unique MAC address for each
interface:

LAN:    AA:BB:CC:DD:EE:E4
2.4GHz: AA:BB:CC:DD:EE:E4
WAN:    AA:BB:CC:DD:EE:E5
5 GHz:  AA:BB:CC:DD:EE:E8

Signed-off-by: Mathias Kresin <dev@kresin.me>
8 years agoramips: rt3883: fix dtc compiler warning
Mathias Kresin [Tue, 16 Aug 2016 05:39:28 +0000 (07:39 +0200)]
ramips: rt3883: fix dtc compiler warning

Fixes the following compiler warning:

Warning (reg_format): "reg" property in /ethernet@10100000/port@0 has invalid length (4 bytes) (#address-cells == 2, #size-cells == 1)
Warning (avoid_default_addr_size): Relying on default #address-cells value for /ethernet@10100000/port@0
Warning (avoid_default_addr_size): Relying on default #size-cells value for /ethernet@10100000/port@0

Signed-off-by: Mathias Kresin <dev@kresin.me>
8 years agolantiq: generate switch configuration for BTHOMEHUBV2B.
Sigurd Hogsbro [Wed, 17 Aug 2016 23:43:16 +0000 (07:43 +0800)]
lantiq: generate switch configuration for BTHOMEHUBV2B.

Split from HH3A as it appears to have a different switch.
https://en.wikipedia.org/wiki/BT_Home_Hub#Models_and_technical_specifications

Signed-off-by: Sigurd Hogsbro <sigurd@hogsbro.org>
8 years agoarchs38: Merge sd and ramfs subtargets in generic again
Alexey Brodkin [Fri, 19 Aug 2016 10:58:36 +0000 (13:58 +0300)]
archs38: Merge sd and ramfs subtargets in generic again

As it turned out we may actually build both initramfs and
SD-based images in one run with just a small tweak in
existing image/Makefile and so we do here.

We're back with one "generic" target for all ARC HS38-based bords.

Kudos to John for his patience and very helpful tips!

Signed-off-by: John Crispin <john@phrozen.org>
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Jo-Philipp Wich <jo@mein.io>
8 years agoltq-deu: fix cra_priority
Martin Schiller [Thu, 18 Aug 2016 10:03:17 +0000 (12:03 +0200)]
ltq-deu: fix cra_priority

With the default priority of 0, the DEU algos would be overlapped
by the generic algos (if available).

To fix this, set the cra_priority of the hardware algos to the
recommended value of 300/400.

Signed-off-by: Martin Schiller <mschiller@tdt.de>
8 years agoltq-deu: fix handling of data blocks with sizes != AES/DES block size
Martin Schiller [Thu, 18 Aug 2016 10:03:16 +0000 (12:03 +0200)]
ltq-deu: fix handling of data blocks with sizes != AES/DES block size

This fix is a backport from the lantiq UGW-6.1.1-MR1

Signed-off-by: Martin Schiller <mschiller@tdt.de>
8 years agoltq-deu: fix aes initialization vector handling
Martin Schiller [Thu, 18 Aug 2016 10:03:15 +0000 (12:03 +0200)]
ltq-deu: fix aes initialization vector handling

This fix is a backport from the lantiq UGW-6.1.1-MR1

Signed-off-by: Martin Schiller <mschiller@tdt.de>
8 years agotoolchain: include yasm in x86 toolchain
Daniel Golle [Fri, 19 Aug 2016 15:49:09 +0000 (17:49 +0200)]
toolchain: include yasm in x86 toolchain

Some libraries require yasm to build with in-line assembly for x86
targets.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
8 years agooxnas: set preinit interface in /etc/board.d/02_network
Daniel Golle [Mon, 15 Aug 2016 00:47:39 +0000 (02:47 +0200)]
oxnas: set preinit interface in /etc/board.d/02_network

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
8 years agokernel: replace cosmetic UBIFS patches with what went upstream
Daniel Golle [Thu, 11 Aug 2016 22:54:41 +0000 (00:54 +0200)]
kernel: replace cosmetic UBIFS patches with what went upstream

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
8 years agobcm53xx: update copy of ASM entry flushing whole D-cache
Rafał Miłecki [Fri, 19 Aug 2016 10:44:44 +0000 (12:44 +0200)]
bcm53xx: update copy of ASM entry flushing whole D-cache

Previous version was based on code from kernel 2.6.22 with Broadcom two
trivial modifications. This updates the copy to the version from current
kernel and refreshes the patch.

This was tested for regressions on Netgear R6250 (BCM4708A0), D-Link
DIR-885L (BCM4709C0) and Tenda AC9 (BCM47189B0).

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agobcm53xx: build Tenda AC9 image
Rafał Miłecki [Fri, 19 Aug 2016 09:36:31 +0000 (11:36 +0200)]
bcm53xx: build Tenda AC9 image

We finally got kernel booting on this device and LAN ports are working,
so it won't "brick" the device. One more big missing thing is WAN port
support. It requires fix for BCM53125 to get switch port 5 working.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agobcm53xx: switch back to standalone ASM entry flushing cache
Rafał Miłecki [Fri, 22 Jul 2016 15:26:33 +0000 (17:26 +0200)]
bcm53xx: switch back to standalone ASM entry flushing cache

Over a year ago in a commit ac96a1665ac7 ("bcm53xx: update Disable MMU
and Dcache during decompression") we switched to Florian's patch for
workarounding CFE bug. The main difference was using a part of existing
__armv7_mmu_cache_flush instead of implementing flushing separately.

This worked well for Northstar devices but doesn't work for BCM53573 as
these devices simply don't start booting with Florian's patch. It's
because of the ldmfd ASM instruction in the __armv7_mmu_cache_flush.

So this commit switches back to using standalone implementation. This
time instead of copying Broadcom's copy of cache-v7.S, we just make a
copy of the original file on our own. Unfortunately we can't cross-dir
compile cache-v7.S from ../../mm/ as that one also adds __INITDATA with
define_cache_functions v7 which would just trigger
> Error: unrecognized/unsupported machine ID (r1 = 0x0000007f).

The only real change Broadcom did in copied .S file was modifying mcr
instruction to use c6 instead of c14. It isn't clear to me if we really
need it, but let's use it for now.

By the way we also update commit message of the
[PATCH] ARM: BCM5301X: Disable MMU and Dcache during decompression

This makes kernel booting on BCM53573 successfully.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agobcm53xx: package drivers for Northstar USB PHYs
Rafał Miłecki [Sun, 14 Aug 2016 14:00:10 +0000 (16:00 +0200)]
bcm53xx: package drivers for Northstar USB PHYs

We don't use them yet as we still init PHY in controller driver but they
will be needed soon.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agokernel: check the right directories for rebuild
Jonas Gorski [Fri, 19 Aug 2016 08:57:30 +0000 (10:57 +0200)]
kernel: check the right directories for rebuild

Pass KERNEL_FILE_DEPENDS to rdep instead of PKG_FILE_DEPENDS, which is
empty. Also don't pass $(CURDIR) as the directory to timestamp, as it
would also pick up non kernel related changes like image building code.

Should fix kernel being rebuild for unrelated changes, as well as not
being rebuild for changes in target/linux/generic.

Fixes: 22ef1c83b35c ("kernel: make the kernel build auto-clean the build dir like package build")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years agotools: Select dosfstools for archs38
Alexey Brodkin [Fri, 19 Aug 2016 04:58:11 +0000 (07:58 +0300)]
tools: Select dosfstools for archs38

In commit df4f41261cf9 ("archs38: Introduce images for SD-cards")
we introduced building of SD-card images for ARC HS38-based boards.

While building images mkdosfs utility is used.
On machines I used for testing mentioned change this utility was
already installed so I didn't figure-out that requirement.

But thanks to Lede's autobuilder this missing bit was highlighted,
see failed build job here:
http://phase1.builds.lede-project.org/builders/archs38%2Fsd/builds/0/steps/images/logs/stdio

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: John Crispin <john@phrozen.org>
Cc: Jo-Philipp Wich <jo@mein.io>
8 years agobusybox: enable sha256sum by default
Jo-Philipp Wich [Thu, 18 Aug 2016 13:06:56 +0000 (15:06 +0200)]
busybox: enable sha256sum by default

Now that snapshot builds are only publishing SHA-256 checksums, it makes
sense to ship an appropriate utility for verification.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agobcm53xx: generate proper network config for Tenda AC9
Rafał Miłecki [Thu, 18 Aug 2016 08:39:34 +0000 (10:39 +0200)]
bcm53xx: generate proper network config for Tenda AC9

It's a more complex device with 2 interfaces on the SoC, one we can use
for LAN and another for WAN.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agomvebu: fix boot stalls on WRT1900AC V1
John Crispin [Thu, 18 Aug 2016 07:38:26 +0000 (09:38 +0200)]
mvebu: fix boot stalls on WRT1900AC V1

Signed-off-by: John Crispin <john@phrozen.org>
8 years agoppp: Extend uci datamodel with persistency sypport
Hans Dedecker [Thu, 14 Jul 2016 08:35:40 +0000 (10:35 +0200)]
ppp: Extend uci datamodel with persistency sypport

PPP daemon can be put into persist mode meaning the
daemon will not exit after a connection gets terminated
but will instead try to reopen the connection.
The re-initiation after the link has been terminated
can be controlled via holdoff; this is helpfull in
scenarios where a BRAS is in denial of service mode
due to link setup requests after a BRAS has gone down

Following uci parameters have been added :
persist (boolean) : Puts the ppp daemon in persist mode
maxfail (integer) : Number of consecutive fail attempts which
puts the PPP daemon in exit mode
holdoff (interget) : Specifies how many seconds to wait
before re-initiating link setup after it has been terminated

Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
8 years agoar71xx: add support for Zbtlink ZBT-WE1526
Piotr Dymacz [Wed, 17 Aug 2016 22:05:03 +0000 (00:05 +0200)]
ar71xx: add support for Zbtlink ZBT-WE1526

Zbtlink ZBT-WE1526 is based on Qualcomm Atheros QCA9531 v2.
Short specification:

- 650/400/200 MHz (CPU/DDR/AHB)
- 5x 10/100 Mbps Ethernet
- 1x USB 2.0
- 128 MB of RAM (DDR2)
- 16 MB of FLASH
- 2T2R 2.4 GHz, up to 22 dBm
- two external, non-detachable antennas
- 8x LED, 1x button
- UART header (pinout: VCC, RX, TX, GND)

Flash instruction:

Use sysupgrade in vendor firmare which is based on OpenWrt.

Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>
8 years agokernel: prevent adding custom string to localversion
Josua Mayer [Wed, 17 Aug 2016 14:18:04 +0000 (16:18 +0200)]
kernel: prevent adding custom string to localversion

When the kernel build picks up a localversion file in the source tree,
that string is unconditionally appended to LOCALVERSION and affects the
uname string.
Make sure to delete any such file.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
8 years agokernel: prevent addition of scm marker to localversion
Josua Mayer [Wed, 17 Aug 2016 14:09:46 +0000 (16:09 +0200)]
kernel: prevent addition of scm marker to localversion

When building the kernel from a git repository, the kernel build appends
either a + or a short commit hash to localversion.
This behaviour can be prevented by passing the empty LOCALVERSION variable
to make.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
8 years agomtd: fix building with glibc
Josua Mayer [Wed, 17 Aug 2016 08:27:12 +0000 (10:27 +0200)]
mtd: fix building with glibc

src/linksys_bootcount.c misses to include stdint.h.
Apparently musl doesn't mind and includes this header by default,
but glibc does not and causes the build to fail.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
8 years agou-boot-envtools: fix building with glibc
Josua Mayer [Fri, 24 Jun 2016 10:46:49 +0000 (12:46 +0200)]
u-boot-envtools: fix building with glibc

tools/env/fw_env.c misses to include stdint.h.
Apparently musl doesn't mind and includes this header by default,
but glibc does not and causes the build to fail.

Signed-off-by: Josua Mayer <josua.mayer97@gmail.com>
8 years agoipq806x: sync with latest patches sent by QCA
John Crispin [Thu, 11 Aug 2016 14:34:08 +0000 (16:34 +0200)]
ipq806x: sync with latest patches sent by QCA

Signed-off-by: John Crispin <john@phrozen.org>
8 years agoubox: fixes segfault inside kmodloader
John Crispin [Thu, 18 Aug 2016 07:00:49 +0000 (09:00 +0200)]
ubox: fixes segfault inside kmodloader

null pointer deref when no modules folder was present

Signed-off-by: John Crispin <john@phrozen.org>
8 years agokernel: bgmac: add support for BCM53573
Rafał Miłecki [Thu, 18 Aug 2016 04:59:09 +0000 (06:59 +0200)]
kernel: bgmac: add support for BCM53573

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agokernel: bgmac: fix regression in MII registration
Rafał Miłecki [Thu, 18 Aug 2016 04:52:04 +0000 (06:52 +0200)]
kernel: bgmac: fix regression in MII registration

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agokernel: bgmac: backport 3 remaining small fixes
Rafał Miłecki [Wed, 17 Aug 2016 10:54:49 +0000 (12:54 +0200)]
kernel: bgmac: backport 3 remaining small fixes

This makes bgmac in sync with upstream verison.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agokernel: bgmac: backport patch adding platform support
Rafał Miłecki [Wed, 17 Aug 2016 07:30:44 +0000 (09:30 +0200)]
kernel: bgmac: backport patch adding platform support

It also reworks bcma support by moving specific code to separated file.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agokernel: bgmac: backport patch switching to feature_flags
Rafał Miłecki [Wed, 17 Aug 2016 05:45:48 +0000 (07:45 +0200)]
kernel: bgmac: backport patch switching to feature_flags

It was needed upstream to avoid bcma references in the main code. To
match this new code our patch adding SRAB was also updated.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agoarchs38: Introduce images for SD-cards
Alexey Brodkin [Tue, 16 Aug 2016 11:49:20 +0000 (14:49 +0300)]
archs38: Introduce images for SD-cards

Historically on ARC we started from initramfs-based images because:
 a) It was much easier to debug especially when toolchain and other
    components were changing quite dynamically
 b) It was our usual approach for embedded Linux

But now with ARC port of Lede/OpenWRT getting more stable and mature
we're ready for more real-life scenarios with FS permanently stored
on SD-card. This essentially benefits from ability to setup devices
that survive reboots with all settings and extra packages kept in place.

Still we keep an ability to build images with initramfs.
This allows us to use storage-less simulators for testing still.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: John Crispin <john@phrozen.org>
8 years agoarchs38: Remove MMC kernel modules, they are built-in now
Alexey Brodkin [Tue, 16 Aug 2016 11:49:19 +0000 (14:49 +0300)]
archs38: Remove MMC kernel modules, they are built-in now

If we want to boot from SD-card we need to have corresponding
drivers already built-in so there's no point in having these
modules.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
8 years agoarchs38: Update kernel configuration
Alexey Brodkin [Tue, 16 Aug 2016 11:49:18 +0000 (14:49 +0300)]
archs38: Update kernel configuration

Now when we're switching to FS on SD-card it's necessary to have
full stack of MMC block & FC drivers built-in otherwise kernel won't
be able to mount FS with needed modules.

Also we enable parsing of input parameters passed to the kernel by
U-Boot. Otherwise kernel won't know where to look for command line and
what's worse device tree blob (we had to disable this by default for
cases when kernel is loaded by JTAG and core registers may have
undefined state lading to kernel going bonkers).

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
8 years agoarchs38: Reduce generalization
Alexey Brodkin [Tue, 16 Aug 2016 11:49:17 +0000 (14:49 +0300)]
archs38: Reduce generalization

As support of ARC HS38 in OpenWRT/Lede matures we don't need
debug-only output binaries any longer, so purging vmlinux for
AXS10x boards.

As for uImage for nSIM it makes completely no sense because there's no
way to run U-Boot on nSIM.

So we remove add_archs38_XXX scripts making code more compact and
cleaner.

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
8 years agoarc: use patched .dts from sources
Alexey Brodkin [Tue, 16 Aug 2016 11:49:16 +0000 (14:49 +0300)]
arc: use patched .dts from sources

Instead of using off-the-tree .dts files for ARC boards we're
switching to use in-tree ones. And for that to work properly
we apply upstream patch that adds currently missing "model"
property.

Upstream patch and discussion could be found here:
http://lists.infradead.org/pipermail/linux-snps-arc/2016-August/001394.html

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Cc: Jonas Gorski <jonas.gorski@gmail.com>
Cc: John Crispin <john@phrozen.org>
8 years agotools/tar: Bump to 1.29
Alexey Brodkin [Tue, 16 Aug 2016 10:44:05 +0000 (13:44 +0300)]
tools/tar: Bump to 1.29

This change updates tar from 1.28 to 1.29.
Among other changes following commit
http://git.savannah.gnu.org/cgit/tar.git/commit/lib/xattr-at.c?h=9c2b57232e3bc2e5ba85387560bcdd851849a128
substitutes previously used off-the-tree patch 100-fix_xattr_disable.patch

Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
8 years agoath9k: switch to using mac80211 intermediate software queues
Felix Fietkau [Fri, 8 Jul 2016 16:08:01 +0000 (18:08 +0200)]
ath9k: switch to using mac80211 intermediate software queues

Provides a nice latency reduction under load, due to mac80211's fq_codel
support.

Signed-off-by: Felix Fietkau <nbd@nbd.name>
8 years agokernel: backport bgmac patch moving MDIO code into separated file
Rafał Miłecki [Tue, 16 Aug 2016 22:06:14 +0000 (00:06 +0200)]
kernel: backport bgmac patch moving MDIO code into separated file

This prepares bgmac for the biggest change: dropping bcma dependency.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agokernel: backport simple bgmac cleanup & fix from Jon
Rafał Miłecki [Tue, 16 Aug 2016 21:24:26 +0000 (23:24 +0200)]
kernel: backport simple bgmac cleanup & fix from Jon

These 2 trivial patches will be followed by a bigger bgmac rework so
they are worth backporting in a separated patch.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agokernel: add BCM53573 flash fix sent upstream
Rafał Miłecki [Tue, 16 Aug 2016 20:33:21 +0000 (22:33 +0200)]
kernel: add BCM53573 flash fix sent upstream

This fixes flash corruptions. It touches bcm47xxsflash driver shared
between brcm47xx and bcm53xx so put it in generic.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agokernel: update bgmac by adding Florian's upstream changes
Rafał Miłecki [Tue, 16 Aug 2016 15:40:32 +0000 (17:40 +0200)]
kernel: update bgmac by adding Florian's upstream changes

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agoswconfig: revert the portmapping patches, they seem to cause a segfault
John Crispin [Tue, 16 Aug 2016 08:19:13 +0000 (10:19 +0200)]
swconfig: revert the portmapping patches, they seem to cause a segfault

Revert "kernel/swconfig: remove obsolete portmapping feature from swconfig"

This reverts commit 675407baa44a8700de20b6b2857009a552a807ba.

Revert "swconfig: remove obsolete portmapping feature"

This reverts commit fca1eb349ef31b133a62880cbd562d6bf17500aa.

Signed-off-by: John Crispin <john@phrozen.org>
8 years agobcm53xx: fix warning caused by m25p80 patch
Rafał Miłecki [Tue, 16 Aug 2016 15:11:09 +0000 (17:11 +0200)]
bcm53xx: fix warning caused by m25p80 patch

It was adding unused variable:
drivers/mtd/devices/m25p80.c: In function 'm25p80_write':
drivers/mtd/devices/m25p80.c:85:6: warning: unused variable 'i' [-Wunused-variable]
  int i;
      ^

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agokernel: support watchdog (and so reboot) on BCM53573
Rafał Miłecki [Tue, 16 Aug 2016 14:53:11 +0000 (16:53 +0200)]
kernel: support watchdog (and so reboot) on BCM53573

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agolantiq/xrx200-net: Add support for eth0 as WAN interface
Martin Schiller [Tue, 16 Aug 2016 04:53:58 +0000 (06:53 +0200)]
lantiq/xrx200-net: Add support for eth0 as WAN interface

Use priv->wan instead of priv->id as indicator if packets should go to the
Ethernet WAN group (DPID=1) or not (DPID=0). This way, it's independant of
interface names or indexes.

Signed-off-by: Martin Schiller <mschiller@tdt.de>
8 years agokernel: add kmod-squashfs
Matteo Croce [Thu, 11 Aug 2016 14:11:39 +0000 (16:11 +0200)]
kernel: add kmod-squashfs

add kernel package to build squashfs as module when it's not the root filesystem

Signed-off-by: Matteo Croce <matteo.croce@canonical.com>
8 years agolantiq: add kmod-ledtrig-usbdev to device packages which have usb led
Matti Laakso [Sat, 13 Aug 2016 12:07:48 +0000 (15:07 +0300)]
lantiq: add kmod-ledtrig-usbdev to device packages which have usb led

By default USB LEDs are associated with usbdev trigger. However,
not all devices which have USB LEDs have kmod-ledtrig-usbdev in their
list of default packages. Add it to the relevant devices.

Signed-off-by: Matti Laakso <matti.laakso@outlook.com>
8 years agolibs/gmp: update to 6.1.1
Hannu Nyman [Mon, 15 Aug 2016 08:26:55 +0000 (11:26 +0300)]
libs/gmp: update to 6.1.1

Update libgmp to 6.1.1

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
8 years agotools/gmp: update to 6.1.1
Hannu Nyman [Mon, 15 Aug 2016 08:26:13 +0000 (11:26 +0300)]
tools/gmp: update to 6.1.1

Update gmp to 6.1.1

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
8 years agotools/scons: update to 2.5.0
Hannu Nyman [Mon, 15 Aug 2016 08:29:31 +0000 (11:29 +0300)]
tools/scons: update to 2.5.0

Update scons to 2.5.0

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
8 years agotools/cmake: update to 3.6.1
Hannu Nyman [Mon, 15 Aug 2016 08:22:21 +0000 (11:22 +0300)]
tools/cmake: update to 3.6.1

Update cmake to 3.6.1

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
8 years agopackage/devel/gdb: Update to 7.11.1
Hannu Nyman [Mon, 15 Aug 2016 08:32:45 +0000 (11:32 +0300)]
package/devel/gdb: Update to 7.11.1

Update gdb to version 7.11.1 to match the version in toolchain.

Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
8 years agorb532: rename patches directory to patches-4.1
Stijn Tintel [Sun, 14 Aug 2016 20:45:43 +0000 (23:45 +0300)]
rb532: rename patches directory to patches-4.1

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
8 years agoorion: rename patches directory to patches-3.18
Stijn Tintel [Sun, 14 Aug 2016 20:45:42 +0000 (23:45 +0300)]
orion: rename patches directory to patches-3.18

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
8 years agoomap: rename patches directory to patches-4.4
Stijn Tintel [Sun, 14 Aug 2016 20:45:41 +0000 (23:45 +0300)]
omap: rename patches directory to patches-4.4

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
8 years agoau1000: rename patches directory to patches-3.18
Stijn Tintel [Sun, 14 Aug 2016 20:45:40 +0000 (23:45 +0300)]
au1000: rename patches directory to patches-3.18

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
8 years agomalta: enable be64 and le64 subtargets
Yousong Zhou [Mon, 15 Aug 2016 11:16:02 +0000 (19:16 +0800)]
malta: enable be64 and le64 subtargets

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
8 years agoocteon: remove the now redundant cpu cflags override
Yousong Zhou [Mon, 15 Aug 2016 11:16:03 +0000 (19:16 +0800)]
octeon: remove the now redundant cpu cflags override

The flags are now properly defined in include/target.mk

Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
8 years agolantiq/xrx200-net: add interrupt for second DMA TX channel to vr9.dtsi
Martin Schiller [Fri, 12 Aug 2016 08:39:39 +0000 (10:39 +0200)]
lantiq/xrx200-net: add interrupt for second DMA TX channel to vr9.dtsi

Signed-off-by: Martin Schiller <mschiller@tdt.de>
8 years agolantiq/xrx200-net: fix "tx ring full" error by introducing second DMA TX channel
Martin Schiller [Fri, 12 Aug 2016 08:39:38 +0000 (10:39 +0200)]
lantiq/xrx200-net: fix "tx ring full" error by introducing second DMA TX channel

With an own DMA TX channel for each network device (eth0 + eth1) there
won't be any "tx ring full" errors any more.

This patch also move the spinlocks to the channel level instead of locking
the whole xrx200_hw structure.

Signed-off-by: Martin Schiller <mschiller@tdt.de>
8 years agoswconfig: remove obsolete portmapping feature
John Crispin [Fri, 12 Aug 2016 12:54:26 +0000 (14:54 +0200)]
swconfig: remove obsolete portmapping feature

Signed-off-by: John Crispin <john@phrozen.org>
8 years agokernel/swconfig: remove obsolete portmapping feature from swconfig
John Crispin [Fri, 12 Aug 2016 12:51:59 +0000 (14:51 +0200)]
kernel/swconfig: remove obsolete portmapping feature from swconfig

Signed-off-by: John Crispin <john@phrozen.org>
8 years agosamba: add file/interface reload triggers & filter interfaces
Conn O'Griofa [Thu, 4 Aug 2016 00:31:50 +0000 (01:31 +0100)]
samba: add file/interface reload triggers & filter interfaces

* Only parse interfaces that are up during init_config (as the
  script depends on this to determine the proper IP/subnet range)
* Add reload interface triggers for samba-designated interfaces
* Force full service restart upon config change to ensure Samba
  binds to new interfaces (sending HUP signal doesn't work)
* Rename "interface" variable to "samba_iface" and move into
  global scope

Needed to fix Samba connectivity for clients connecting from a
different LAN subnet (e.g. pseudobridge configurations) due to the
'bind interfaces only' setting.

Signed-off-by: Conn O'Griofa <connogriofa@gmail.com>
8 years agoar71xx: fix profile name of Mercury MW4530R
Chuanhong Guo [Thu, 11 Aug 2016 03:35:21 +0000 (11:35 +0800)]
ar71xx: fix profile name of Mercury MW4530R

The mw4530r-v1 profile in tp-link.mk is for Mercury MW4530R.
There is no such a device called TL-WDR4530.
Also change MERCURY to Mercury in /lib/ar71xx.sh

Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
8 years agoprocd: update to latest git HEAD
John Crispin [Mon, 15 Aug 2016 13:15:27 +0000 (15:15 +0200)]
procd: update to latest git HEAD

adds O_PATH define

Signed-off-by: John Crispin <john@phrozen.org>
8 years agoncurses: change handling of PKG_CONFIG_LIBDIR
Jo-Philipp Wich [Mon, 8 Aug 2016 15:14:41 +0000 (17:14 +0200)]
ncurses: change handling of PKG_CONFIG_LIBDIR

When PKG_CONFIG_LIBDIR was unset in the environment, the configure
script was deducing the PKG_CONFIG_LIBDIR from the location of the
pkg-config binary, which doesn't make a lot of sense, and isn't done
by other autotools based packages.

Patch imported from the Buildroot project:
https://github.com/buildroot/buildroot/blob/master/package/ncurses/0001-fixup-pkg-config-handling.patch

Also refresh patches while we're at.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agoscripts: ipkg-build: do not require git or svn
Jo-Philipp Wich [Mon, 15 Aug 2016 11:27:11 +0000 (13:27 +0200)]
scripts: ipkg-build: do not require git or svn

Move the "which svn" and "which git" calls next to the timestamp commands
using those tools to not prematurely fail on systems where svn or git are
not present.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agokernel: fix crashlog on x86/64
Jo-Philipp Wich [Mon, 15 Aug 2016 10:14:50 +0000 (12:14 +0200)]
kernel: fix crashlog on x86/64

The bootmem area reserved for crashlog might be smaller than CRASHLOG_OFFSET
bytes, leading to an integer underflow when calculating the memory address
in crashlog_set_addr() which subsequently causes the kernel to crash when
attempting to vmap() the crashlog pages.

Change the logic to only consider the offset when the size of the used memory
area is sufficient.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agobcm53xx: add quick fixes for BCM53573
Rafał Miłecki [Mon, 15 Aug 2016 10:47:21 +0000 (12:47 +0200)]
bcm53xx: add quick fixes for BCM53573

It adds and uses ILP clock that requires some other work (in progress)
for upstreaming it. Other than that it adds a quick fix for bcma to add
serial flash before trying to read SPROM.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agobcm53xx: add temporary BCM53573 ILP clock driver
Rafał Miłecki [Mon, 15 Aug 2016 08:19:10 +0000 (10:19 +0200)]
bcm53xx: add temporary BCM53573 ILP clock driver

It wasn't accepted upstream as there was a discusson on Northstar vs.
BCM53573. Once we get a new ARM arch Kconfig entry it should be
possible to upstream it.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agobcm53xx: prepare for building Tenda AC9 TRX image
Rafał Miłecki [Mon, 15 Aug 2016 07:28:54 +0000 (09:28 +0200)]
bcm53xx: prepare for building Tenda AC9 TRX image

It'll be enabled when we complete basic support.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agotoolchain/uClibc: add missing config symbol
Stijn Tintel [Sat, 13 Aug 2016 19:50:18 +0000 (21:50 +0200)]
toolchain/uClibc: add missing config symbol

Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
8 years agobcm53xx: drop target's preinit network support script
Rafał Miłecki [Sun, 14 Aug 2016 21:12:36 +0000 (23:12 +0200)]
bcm53xx: drop target's preinit network support script

We don't need it anymore since the rework of generic preinit script.

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agobase-files: set pi_ifname in board.d case to fix deconfig
Jonas Gorski [Sun, 14 Aug 2016 20:59:28 +0000 (22:59 +0200)]
base-files: set pi_ifname in board.d case to fix deconfig

Due to an empty pi_ifname in the generic failsafe setup, the deconfig
never removed the failsafe networking interface, causing broken
networking later on.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years agotools: make_ext4fs: switch to LEDE git mirror
Jo-Philipp Wich [Sun, 14 Aug 2016 20:29:36 +0000 (22:29 +0200)]
tools: make_ext4fs: switch to LEDE git mirror

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agotools: make_ext4fs: support creating empty filesystem images
Jo-Philipp Wich [Sun, 14 Aug 2016 20:18:53 +0000 (22:18 +0200)]
tools: make_ext4fs: support creating empty filesystem images

Update make_ext4fs to latest git head in order to support creating empty
filesystem images by making the source directory argument optional.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agomvebu: rework ClearFog bundle.tar.gz generation
Jo-Philipp Wich [Sun, 14 Aug 2016 17:24:56 +0000 (19:24 +0200)]
mvebu: rework ClearFog bundle.tar.gz generation

Instead of introducing a fake filesystem type, move the tar generation step
directly into the image build step.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agobcm53xx: support USB 2.0 controller on BCM53573
Rafał Miłecki [Sun, 14 Aug 2016 11:05:02 +0000 (13:05 +0200)]
bcm53xx: support USB 2.0 controller on BCM53573

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agobcm53xx: backport USB 3.0 controller init patch
Rafał Miłecki [Sun, 14 Aug 2016 10:41:32 +0000 (12:41 +0200)]
bcm53xx: backport USB 3.0 controller init patch

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agobcm53xx: backport USB 3.0 Northstar PHY driver
Rafał Miłecki [Sun, 14 Aug 2016 09:30:36 +0000 (11:30 +0200)]
bcm53xx: backport USB 3.0 Northstar PHY driver

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agobcm53xx: rename PHY patches to use 07* prefix
Rafał Miłecki [Sun, 14 Aug 2016 09:21:48 +0000 (11:21 +0200)]
bcm53xx: rename PHY patches to use 07* prefix

This is not a strict rule but it matches better this one:
7xx - network / phy driver patches

Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
8 years agomvebu: add ClearFog .tar.gz bundle
Jo-Philipp Wich [Thu, 11 Aug 2016 15:20:54 +0000 (17:20 +0200)]
mvebu: add ClearFog .tar.gz bundle

The previous image building code rework removed the rootfs.tar.gz with embedded
kernel and dtb build artifact which is required to build suitable SD images.

Reintroduce a .tar.gz artifact locally which embeds kernel and dtb, similar to
how the old code handled it.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agokernel: backport upstream challenge ACK fix (CVE-2016-5696)
Jo-Philipp Wich [Sat, 13 Aug 2016 13:17:42 +0000 (15:17 +0200)]
kernel: backport upstream challenge ACK fix (CVE-2016-5696)

Yue Cao claims that current host rate limiting of challenge ACKS
(RFC 5961) could leak enough information to allow a patient attacker
to hijack TCP sessions. He will soon provide details in an academic
paper.

Backports upstream commit 75ff39ccc1bd5d3c455b6822ab09e533c551f758
to the used LEDE kernel versions.

Signed-off-by: Jo-Philipp Wich <jo@mein.io>
8 years agobrcm63xx: switch to board based failsafe networking
Jonas Gorski [Sat, 13 Aug 2016 11:53:06 +0000 (13:53 +0200)]
brcm63xx: switch to board based failsafe networking

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years agobase-files: configure switch in failsafe
Jonas Gorski [Thu, 28 Jul 2016 22:25:09 +0000 (00:25 +0200)]
base-files: configure switch in failsafe

Also configure the switch based on the failsafe config, and create the
failsafe interface as tagged if necessary.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years agobase-files: allow failsafe to configure vlans
Jonas Gorski [Thu, 28 Jul 2016 22:23:55 +0000 (00:23 +0200)]
base-files: allow failsafe to configure vlans

In preparation of properly setting up vlans and switches, add
support for configuring failsafe on a vlan tagged interface.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
8 years agobase-files: add preinit ifname detection based on board.json
Jonas Gorski [Thu, 28 Jul 2016 20:58:59 +0000 (22:58 +0200)]
base-files: add preinit ifname detection based on board.json

Make use of the existing board.d to autodetect lan ifname in a generic way.

Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>