drm/i915/uc: Fix includes order

Fix includes order and make sure we only include required headers.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-5-michal.wajdeczko@intel.com

drm/i915/guc: Move GuC core definitions into dedicated files

Move GuC core definitions into dedicated files as we want to
keep GuC specific code in separated files.

v2: move all functions in single patch (Joonas)
    fix old checkpatch issues (Sagar)

v3: rebased

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com> #1
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-4-michal.wajdeczko@intel.com

drm/i915/guc: Move GuC submission declarations into dedicated header

Move GuC submission declarations into dedicated header as we want to
keep uC specific code in separate files.

v2: fix include (Chris)
    update commit message (Joonas)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: MichaĹ Winiarski <michal.winiarski@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-3-michal.wajdeczko@intel.com

drm/i915/guc: Move GuC log declarations into dedicated header

Move GuC log declarations into dedicated header as we want to
keep component specific code in separate files.

v2: fix includes (Chris)
    update commit message (Joonas)

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004181343.66348-2-michal.wajdeczko@intel.com

drm/i915/cnl: Do not add an extra page for precaution in the Gen10 LRC size

BSpec indicates exactly 16752 DWORDs (17 pages), plus one page for PPHWSP. Please
notice that, when looking at the BSpec context image table, the right filter has
to be applied (e.g. "CNL") as some rows are excluded for specific GENs.

BSpec: 1383

v2: Update count and add BSpec tag (Joonas)
v3: Warning about filters in the commit message (Joonas)

Suggested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Fixes: 7fd0b1a ("drm/i915/cnl: Add Gen10 LRC size")
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Ben Widawsky <ben@bwidawsk.net>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507131592-29209-1-git-send-email-oscar.mateo@intel.com
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: avoid potential uninitialized variable use

One of the recent changes introduced a warning about
undefined behavior in the sanity checking:

drivers/gpu/drm/i915/intel_ddi.c: In function 'intel_ddi_hdmi_level':
drivers/gpu/drm/i915/intel_ddi.c:654:6: error: 'n_hdmi_entries' may be used uninitialized in this function [-Werror=maybe-uninitialized]

It seems that the new cnl specific get_buf_trans functions
can return uninitialized data if the voltage level is set
to an unexpected value. This changes the code to always return
'1' in that error case, which seems like the safest choice
as we use one less than the number as an array index later on.

Fixes: cc9cabfdec38 ("drm/i915/cnl: Move voltage check into ddi buf trans functions.")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
[danvet: shut up gcc comment added.]
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005120835.437022-1-arnd@arndb.de

drm/i915/selftests: fix check for intel IOMMU

An earlier bugfix tried to work around this build failure:

drivers/gpu/drm/i915/selftests/mock_gem_device.c: In function 'mock_gem_device':
drivers/gpu/drm/i915/selftests/mock_gem_device.c:151:20: error: 'struct dev_archdata' has no member named 'iommu'

Checking for CONFIG_IOMMU_API is not sufficient as a compile-time
test since that may be enabled in configurations that have neither
INTEL_IOMMU not AMD_IOMMU enabled. This changes the check to
INTEL_IOMMU instead, as this is the only case we actually care about.

Fixes: f46f156ea770 ("drm/i915/selftests: Only touch archdata.iommu when it exists")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005120749.400818-1-arnd@arndb.de

drm/i915/selftests: Remember to create the fake preempt context

For the fake device we have our own set of mock contexts that need to
match the real contexts we normally create. Currently this requires us
to manually instantiate them for the selftests, which I forgot.

Reported-by: Matthew Auld <matthew.william.auld@gmail.com>
Fixes: e7af3116836f ("drm/i915: Introduce a preempt context")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171005105927.22991-1-chris@chris-wilson.co.uk
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>

drm/i915/edp: Increase the T12 delay quirk to 1300ms

For this specific PCI device, the eDP panel requires a higher panel
power cycle delay of 1300ms where the minimum spec requirement of panel
power cycle delay is 500ms. This fix in combination with correct
timestamp at which we get the panel power off time fixes the dP AUX CH
timeouts seen on various IGT tests.

Fixes: c99a259b4b5192ba ("drm/i915/edp: Add a T12 panel delay quirk to fix
DP AUX CH timeouts")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101518
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Acked-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507073845-13420-2-git-send-email-manasi.d.navare@intel.com

drm/i915/edp: Get the Panel Power Off timestamp after panel is off

Kernel stores the time in jiffies at which the eDP panel is turned
off. This should be obtained after the panel is off (after the
wait_panel_off). When we next attempt to turn the panel on, we use the
difference between the timestamp at which we want to turn the panel on
and timestamp at which panel was turned off to ensure that this is equal
to panel power cycle delay and if not we wait for the remaining
time. Not waiting for the panel power cycle delay can cause the panel to
not turn on giving rise to AUX timeouts for the attempted AUX
transactions.

v2:
* Separate lines for bugzilla (Jani Nikula)
* Suggested by tag (Daniel Vetter)

Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: stable@vger.kernel.org
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101518
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101144
Suggested-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Reviewed-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Reviewed-by: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1507135706-17147-1-git-send-email-manasi.d.navare@intel.com

drm/i915/mst: Use MST sideband message transactions for dpms control

Use the POWER_DOWN_PHY and POWER_UP_PHY sideband message transactions to
set power states for downstream sinks. Apart from giving us the ability
to set power state for individual sinks, this fixes the below test for
me.

$ xrandr --display :0 --output DP-2-2-8 --off
$ xrandr --display :0 --output DP-2-2-1 --off
$ xrandr --display :0 --output DP-2-2-8 --auto #Black screen
$ xrandr --display :0 --output DP-2-2-1 --auto

v2: Modify and document the dpms and port disable order (Ville)
    Add comment explaining is_mst = !crtc_state equivalence(Ville, Maarten)

v3 by Jani: rebase

References: https://bugs.freedesktop.org/show_bug.cgi?id=90963
References: https://bugs.freedesktop.org/show_bug.cgi?id=88124
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Lyude <lyude@redhat.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Lyude Paul <lyude@redhat.com>
Acked-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Signed-off-by: Dhinakaran Pandiyan <dhinakaran.pandiyan@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003142211.860-1-jani.nikula@intel.com

drm/i915/scheduler: Support user-defined priorities

Use a priority stored in the context as the initial value when
submitting a request. This allows us to change the default priority on a
per-context basis, allowing different contexts to be favoured with GPU
time at the expense of lower importance work. The user can adjust the
context's priority via I915_CONTEXT_PARAM_PRIORITY, with more positive
values being higher priority (they will be serviced earlier, after their
dependencies have been resolved). Any prerequisite work for an execbuf
will have its priority raised to match the new request as required.

Normal users can specify any value in the range of -1023 to 0 [default],
i.e. they can reduce the priority of their workloads (and temporarily
boost it back to normal if so desired).

Privileged users can specify any value in the range of -1023 to 1023,
[default is 0], i.e. they can raise their priority above all overs and
so potentially starve the system.

Note that the existing schedulers are not fair, nor load balancing, the
execution is strictly by priority on a first-come, first-served basis,
and the driver may choose to boost some requests above the range
available to users.

This priority was originally based around nice(2), but evolved to allow
clients to adjust their priority within a small range, and allow for a
privileged high priority range.

For example, this can be used to implement EGL_IMG_context_priority
https://www.khronos.org/registry/egl/extensions/IMG/EGL_IMG_context_priority.txt

EGL_CONTEXT_PRIORITY_LEVEL_IMG determines the priority level of
        the context to be created. This attribute is a hint, as an
        implementation may not support multiple contexts at some
        priority levels and system policy may limit access to high
        priority contexts to appropriate system privilege level. The
        default value for EGL_CONTEXT_PRIORITY_LEVEL_IMG is
        EGL_CONTEXT_PRIORITY_MEDIUM_IMG."

so we can map

PRIORITY_HIGH -> 1023 [privileged, will failback to 0]
PRIORITY_MED -> 0 [default]
PRIORITY_LOW -> -1023

They also map onto the priorities used by VkQueue (and a VkQueue is
essentially a timeline, our i915_gem_context under full-ppgtt).

v2: s/CAP_SYS_ADMIN/CAP_SYS_NICE/
v3: Report min/max user priorities as defines in the uapi, and rebase
internal priorities on the exposed values.

Testcase: igt/gem_exec_schedule
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-9-chris@chris-wilson.co.uk

drm/i915/execlists: Preemption!

When we write to ELSP, it triggers a context preemption at the earliest
arbitration point (3DPRIMITIVE, some PIPECONTROLs, a few other
operations and the explicit MI_ARB_CHECK). If this is to the same
context, it triggers a LITE_RESTORE where the RING_TAIL is merely
updated (used currently to chain requests from the same context
together, avoiding bubbles). However, if it is to a different context, a
full context-switch is performed and it will start to execute the new
context saving the image of the old for later execution.

Previously we avoided preemption by only submitting a new context when
the old was idle. But now we wish embrace it, and if the new request has
a higher priority than the currently executing request, we write to the
ELSP regardless, thus triggering preemption, but we tell the GPU to
switch to our special preemption context (not the target). In the
context-switch interrupt handler, we know that the previous contexts
have finished execution and so can unwind all the incomplete requests
and compute the new highest priority request to execute.

It would be feasible to avoid the switch-to-idle intermediate by
programming the ELSP with the target context. The difficulty is in
tracking which request that should be whilst maintaining the dependency
change, the error comes in with coalesced requests. As we only track the
most recent request and its priority, we may run into the issue of being
tricked in preempting a high priority request that was followed by a
low priority request from the same context (e.g. for PI); worse still
that earlier request may be our own dependency and the order then broken
by preemption. By injecting the switch-to-idle and then recomputing the
priority queue, we avoid the issue with tracking in-flight coalesced
requests. Having tried the preempt-to-busy approach, and failed to find
a way around the coalesced priority issue, Michal's original proposal to
inject an idle context (based on handling GuC preemption) succeeds.

The current heuristic for deciding when to preempt are only if the new
request is of higher priority, and has the privileged priority of
greater than 0. Note that the scheduler remains unfair!

v2: Disable for gen8 (bdw/bsw) as we need additional w/a for GPGPU.
Since, the feature is now conditional and not always available when we
have a scheduler, make it known via the HAS_SCHEDULER GETPARAM (now a
capability mask).
v3: Stylistic tweaks.
v4: Appease Joonas with a snippet of kerneldoc, only to fuel to fire of
the preempt vs preempting debate.

Suggested-by: Michal Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michal Winiarski <michal.winiarski@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Cc: Ben Widawsky <benjamin.widawsky@intel.com>
Cc: Zhenyu Wang <zhenyuw@linux.intel.com>
Cc: Zhi Wang <zhi.a.wang@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-8-chris@chris-wilson.co.uk

drm/i915: Expand I915_PARAM_HAS_SCHEDULER into a capability bitmask

In the next few patches, we wish to enable different features for the
scheduler, some which may subtlety change ABI (e.g. allow requests to be
reordered under different circumstances). So we need to make sure
userspace is cognizant of the changes (if they care), by which we employ
the usual method of a GETPARAM. We already have an
I915_PARAM_HAS_SCHEDULER (which notes the existing ability to reorder
requests to avoid bubbles), and now we wish to extend that to be a
bitmask to describe the different capabilities implemented.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-7-chris@chris-wilson.co.uk

drm/i915/execlists: Keep request->priority for its lifetime

With preemption, we will want to "unsubmit" a request, taking it back
from the hw and returning it to the priority sorted execution list. In
order to know where to insert it into that list, we need to remember
its adjust priority (which may change even as it was being executed).

This also affects reset for execlists as we are now unsubmitting the
requests following the reset (rather than directly writing the ELSP for
the inflight contexts). This turns reset into an accidental preemption
point, as after the reset we may choose a different pair of contexts to
submit to hw.

GuC is not updated as this series doesn't add preemption to the GuC
submission, and so it can keep benefiting from the early pruning of the
DFS inside execlists_schedule() for a little longer. We also need to
find a way of reducing the cost of that DFS...

v2: Include priority in error-state

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-6-chris@chris-wilson.co.uk

drm/i915/execlists: Move bdw GPGPU w/a to emit_bb

Move the re-enabling of MI arbitration from a per-bb w/a buffer to the
emission of the batch buffer itself.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-5-chris@chris-wilson.co.uk

drm/i915: Introduce a preempt context

Add another perma-pinned context for using for preemption at any time.
We cannot just reuse the existing kernel context, as first and foremost
we need to ensure that we can preempt the kernel context itself, so
require a distinct context id. Similar to the kernel context, we may
want to interrupt execution and switch to the preempt context at any
time, and so it needs to be permanently pinned and available.

To compensate for yet another permanent allocation, we shrink the
existing context and the new context by reducing their ringbuffer to the
minimum.

v2: Assert that we never allocate a request from the preemption context.
v3: Limit perma-pin to engines that may preempt.
v4: Onion cleanup for early driver death
v5: Onion ordering in main driver cleanup as well.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Michał Winiarski <michal.winiarski@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-4-chris@chris-wilson.co.uk

drm/i915/execlists: Distinguish the incomplete context notifies

Let the listener know that the context we just scheduled out was not
complete, and will be scheduled back in at a later point.

v2: Handle CONTEXT_STATUS_PREEMPTED in gvt by aliasing it to
CONTEXT_STATUS_OUT for the moment, gvt can expand upon the difference
later.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Zhenyu Wang" <zhenyuw@linux.intel.com>
Cc: "Wang, Zhi A" <zhi.a.wang@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-3-chris@chris-wilson.co.uk

drm/i915/preempt: Default to disabled mid-command preemption levels

Supporting fine-granularity preemption levels may require changes in
userspace batch buffer programming. Therefore, we need to fallback to
safe default values, rather that use hardware defaults. Userspace is
still able to enable fine-granularity, since we're whitelisting the
register controlling it in WaEnablePreemptionGranularityControlByUMD.

v2: Extend w/a to cover Cannonlake
v3: Fix commentary to include both fake w/a names.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-2-chris@chris-wilson.co.uk

drm/i915/preempt: Fix WaEnablePreemptionGranularityControlByUMD

The WA applies to all production Gen9 and requires both enabling and
whitelisting of the per-context preemption control register.

v2: Extend to Cannonlake.

Signed-off-by: Jeff McGee <jeff.mcgee@intel.com>
Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003203453.15692-1-chris@chris-wilson.co.uk

drm/i915/guc: Move Guc early init into own function

We don't want to make aggregate uc functions to be too detailed.
This will also make future patch easier.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-7-michal.wajdeczko@intel.com

drm/i915/huc: Move HuC declarations into dedicated header

We want to keep each uC specific code in separate files.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-6-michal.wajdeczko@intel.com

drm/i915/uc: Move uC fw helper code into dedicated files

This is a prerequisite to unblock next steps.

v2: correct include order (Joonas)
v3: use common function prefix (Joonas)
    add kerneldoc (Michal)

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-5-michal.wajdeczko@intel.com

drm/i915/uc: Create intel_uc_init_mmio

This patch adds new function intel_uc_init_mmio which will initialize
MMIO access related variables prior to uc load/init.

v2: Removed unnecessary export of guc_send_init_regs. Created
intel_uc_init_mmio that currently wraps guc_init_send_regs. (Michal)

v3 (Michal): add kerneldoc (Joonas)

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-4-michal.wajdeczko@intel.com

drm/i915/uc: Drop unnecessary forward declaration

We don't need it here.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-3-michal.wajdeczko@intel.com

drm/i915: Make intel_uncore.h header self-contained

We're trying to resolve inter-header dependencies.

Signed-off-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004153327.32608-2-michal.wajdeczko@intel.com

drm/i915: Remove defunct trace points

trace_i915_gem_evict_everything and trace_i915_gem_ring_flush stopped
being used when their parent functions were removed.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003125055.11370-2-chris@chris-wilson.co.uk

drm/i915: Fix some tracepoints to capture full 64b

The tracepoints need some tlc, in particular we've neglected to update
them for the 64b era.

v2: Prefix hexadecimal output with 0x.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003125055.11370-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Remove WA_(SET|CLR)_BIT

These macros are of dubious merit when coupled with the per-context w/a
set. Instead of tweaking the value in the context, they tweak the value
based on the mmio at the time of recording; they are almost by
definition not per-context! Having removed the last users, remove the
macros to avoid temptation in the future.

v2: Kill WA_WRITE as well (now also unused).

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004124153.14142-2-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915: Move MMCD_MISC_CTRL from context w/a to standard

Looking at gem_workarounds shows us that MMCD_MISC_CTRL is not restored
following a suspend-resume cycle. This implies that MMCD_MISC_CTRL is
not stored in the context, but is an ordinary register w/a that we need to
restore during init_hw.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004124153.14142-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915: Transform whitelisting WAs into a simple reg write

RING_FORCE_TO_NONPRIV registers do not live in the logical context. They are simply
global privileged MMIO registers that happen to be powercontext saved and restored
(meaning only they can survive RC6). Therefore, there is absolutely no need to save
them so that they can be restored everytime we create a new logical context.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Oscar Mateo <oscar.mateo@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506638439-6903-1-git-send-email-oscar.mateo@intel.com
Acked-by: Michel Thierry <michel.thierry@intel.com>
Tested-by: Chris Wilson <chris@chris-wilson.co.uk> #bxt
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Remove use_mmio_flip modparm, v2.

This has been unused since commit afa8ce5b3080
("drm/i915: Nuke legacy flip queueing code").

Changes since v1:
- Rebase on top of all the changes to modparams.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
\o/-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171004094416.31306-1-maarten.lankhorst@linux.intel.com

drm/i915/glk: Fix DMC/DC state idleness calculation

According to BSpec GLK like BXT needs to ignore the idle state of cores
before starting the DMC firmware's DC state handler.

Fixes: dbb28b5c3d3c ("drm/i915/DMC/GLK: Load DMC on GLK")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-2-imre.deak@intel.com

drm/i915/cnl: Reprogram DMC firmware after S3/S4 resume

The DMC firmware program memory is lost after S3/S4 system suspend, so
we need to reprogram it during resume.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=103070
Fixes: cebfcead63de ("drm/i915/DMC/CNL: Load DMC on CNL")
Cc: Anusha Srivatsa <anusha.srivatsa@intel.com>
Cc: Animesh Manna <animesh.manna@intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003095159.711-1-imre.deak@intel.com

drm/i915: Skip vblank waits for cursor updates when watermarks dont need updating

In legacy cursor updates we need the extra vblank waits if we update
watermarks, and then we cannot skip the vblank for cursors.

This is why for < gen9 we disabled the cursor fastpath, but we can skip
the wait when post vblank watermarks are untouched.

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919121419.13708-2-maarten.lankhorst@linux.intel.com

drm/i915: Unset legacy_cursor_update early in intel_atomic_commit, v3.

Commit b44d5c0c105a ("drm/i915: Always wait for flip_done, v2.") removed
the call to wait_for_vblanks and replaced it with flip_done.

Unfortunately legacy_cursor_update was unset too late, and the
replacement call drm_atomic_helper_wait_for_flip_done() was
a noop. Make sure that its unset before setup_commit() is
called to fix this issue.

Changes since v1:
- Force vblank wait for watermarks not yet converted to atomic too. (Ville)
- Use for_each_new_intel_crtc_in_state. (Ville)
Changes since v2:
- Move the optimization to a separate commit. (Ville)

Signed-off-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Fixes: b44d5c0c105a ("drm/i915: Always wait for flip_done, v2.")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102675
Testcase: kms_cursor_crc
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Reported-by: Marta Löfstedt <marta.lofstedt@intel.com>
Cc: Marta Löfstedt <marta.lofstedt@intel.com>
Tested-by: Marta Löfstedt <marta.lofstedt@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170919121419.13708-1-maarten.lankhorst@linux.intel.com

drm/i915: Organize GLK_COLORS.

Let's organize this in a way that it gets more obvious
when looking to the platform colors and in a easier
way to get inherited.

v2: Add comma at the end (Jani), when possible.

Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-3-rodrigo.vivi@intel.com

drm/i915: Organize GEN features inheritance.

As Chris noticed the current organization is confusing
and inheritance is not clear.

So, let's split it in GEN<n>_FEATURES <cdn>_PLATFORM
where new GEN inherit features from previous gens and
Platforms only use gen features plus what ever is specific
for that platform and shouldn't be passed on.

Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-2-rodrigo.vivi@intel.com

drm/i915/skl: Fix has_ipc on skl and document WaDisableIPC.

According to Spec for SKL+: "Isochronous Priority Control.
If enabled, Display sends demoted requests once the transition
watermark is reached. If transition watermark is not enabled,
Display sends demoted requests when the display buffer is full."

The commit 'e57f1c02155f ("drm/i915/gen9+: Add has_ipc flag in
device info structure")' introduced that as gen9+ but missing many
SKL Skus.

I believe the reason for that is Spec also mentions workarounds for
SKL-ALL: "IPC (Isoch Priority Control) may cause underflows
WA: Do not enable IPC in register ARB_CTL2"

It seems lame to add the feature and forever disable it,
but it will avoid a mistake of enabling it when we are reorganizing
the feature definitions on i915_pci.c later.

It will also allow us to probably extend that workaround for
other platforms.

Cc: Mahesh Kumar <mahesh1.kumar@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Mahesh Kumar <mahesh1.kumar@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171003063652.17248-1-rodrigo.vivi@intel.com

drm/i915: Fix DDI PHY init if it was already on

The common lane power down flag of a DPIO PHY has a funky semantic:
after the initial enabling of the PHY (so from a disabled state) this
flag will be clear. It will be set only after the PHY will be used for
the first time (for instance due to enabling the corresponding pipe) and
then become unused (due to disabling the pipe). During the initial PHY
enablement we don't know which of the above phases we are in, so move
the check for the flag where this is known, the HW readout code. This is
where the rest of lane power down status checks are done anyway.

This fixes at least a problem on GLK where after module reloading, the
common lane power down flag of PHY1 is set, but the PHY is actually
powered-on and properly set up. The GRC readout code for other PHYs will
hence think that PHY1 is not powered initially and disable it after the
GRC readout. This will cause the AUX power well related to PHY1 to get
disabled in a stuck state, timing out when we try to enable it later.

Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Fixes: e93da0a0137b ("drm/i915/bxt: Sanitiy check the PHY lane power down status")
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102777
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171002135307.26117-1-imre.deak@intel.com

drm/i915/glk, cnl: Implement WaDisableScalarClockGating

On GLK and CNL enabling a pipe with its pipe scaler enabled will result
in a FIFO underrun. This happens only once after driver loading or
system/runtime resume, more specifically after power well 1 gets
enabled; subsequent modesets seem to be free of underruns. The BSpec
workaround for this is to disable the pipe scaler clock gating for the
duration of modeset. Based on my tests disabling clock gating must be
done before enabling pipe scaling and we can re-enable it after the pipe
is enabled and one vblank has passed.

For consistency I also checked if plane scaling would cause the same
problem, but that doesn't seem to trigger this problem.

The patch is based on an earlier version from Ander.

v2 (Rodrigo):
- Set also CLKGATE_DIS_PSL bits 8 and 9.
- Add also the BSpec workaround ID.

Cc: Ander Conselvan de Oliveira <conselvan2@gmail.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=100302
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20171002075557.32615-1-imre.deak@intel.com

drm/i915: Add has_psr-flag to gen9lp

While testing Jim Bride's latest batch of PSR patches I noticed
that gen9lp doesn't include the has_psr flag, and that our GLK
system thus reported PSR as unsupported.

This patch simply adds has_psr.

Signed-off-by: David Weinehall <david.weinehall@linux.intel.com>
Acked-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170808100952.26448-1-david.weinehall@linux.intel.com

drm/i915/gen8+: Init/reset display interrupts only if i915 IRQs are enabled

Only init / reset the display interrupts during power well enabling /
disabling if the i915 interrupts are enabled. So far we did the
init / reset during driver loading / resuming too, where
initialization / enabling of the i915 interrupts happens only at a later
point. This didn't cause a problem due to GEN8_MASTER_IRQ_CONTROL being
cleared, but triggered gen3_assert_iir_is_zero() in GEN8_IRQ_INIT_NDX().

References: https://bugs.freedesktop.org/show_bug.cgi?id=102988
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928100624.15533-1-imre.deak@intel.com

drm/i915/gen9+: Set same power state before hibernation image save/restore

Atm, on GEN9 big core platforms before saving the hibernation image we
uninitialize the display, disabling power wells manually, while before
restoring the image we keep things powered (letting HW/DMC power down
things as needed). The state mismatch will trigger the following error:

DC state mismatch (0x0 -> 0x2)

While the restore handler knows how to initialize the display from an
unknown state (due to a different loader kernel or not having i915
loaded in the loader kernel) we should still use the same state for
consistency before image saving and restoring. Do this by uniniting the
display before restoring the image too.

Bugzilla: https://bugs.freedesktop.org/attachment.cgi?id=133376
Reported-and-tested-by: Wang Wendy <wendy.wang@intel.com>
Reported-and-tested-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Wang Wendy <wendy.wang@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170816144607.9935-1-imre.deak@intel.com

drm/i915/execlists: Cache the last priolist lookup

Avoid the repeated rbtree lookup for each request as we unwind them by
tracking the last priolist.

v2: Fix up my unhelpful suggestion of using default_priolist.

Signed-off-by: Michał Winiarski <michal.winiarski@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928193910.17988-4-chris@chris-wilson.co.uk

drm/i915: Give the invalid priority a magic name

We use INT_MIN to denote the priority of a request that has not been
submitted to the scheduler; we treat INT_MIN as an invalid priority and
initialise the request to it. Give the value a name so it stands out.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928193910.17988-3-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com

drm/i915/execlists: Move request unwinding to a separate function

In the future, we will want to unwind requests following a preemption
point. This requires the same steps as for unwinding upon a reset, so
extract the existing code to a separate function for later use.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928193910.17988-2-chris@chris-wilson.co.uk

drm/i915: Move i915_gem_restore_fences to i915_gem_resume

i915_gem_restore_fences is GEM resumption task hence it is moved to
i915_gem_resume from i915_restore_state.

Signed-off-by: Sagar Arun Kamble <sagar.a.kamble@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506661116-12106-1-git-send-email-sagar.a.kamble@intel.com
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/selftests: Replace wmb() with i915_gem_chipset_flush()

Currently, we are being fairly lazy and only using a wmb() following an
update to an active batch. Previously, we have found that to be
insufficient to ensure that a write from the CPU reaches memory in a
timely fashion, and in some caches we may need to flush a chipset cache.
To that end, we have i915_gem_chipset_flush() so use it.

Suggested-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170926153409.7928-1-chris@chris-wilson.co.uk
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>

drm/i915: Update DRIVER_DATE to 20170929

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Use memset64() to prefill the GTT page

Take advantage of optimised memset64() instead of open coding it to
prefill the GTT pages.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20170926095353.11036-1-chris@chris-wilson.co.uk
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>

drm/i915: Also discard second CRC on gen8+ platforms.

One of the differences I spotted for GEN8+ platforms when
compared to older platforms is that spec for BDW+ includes
this sentence:

"The first CRC done indication after CRC is first enabled is
from only a partial frame, so it will not have the expected
CRC result."

This is an indication that on BDW+ platforms, by the time
we receive the interrupt the CRC is not accurate yet for
the full frame. That would be ok, because we are already
skipping the first CRC for all platforms. However the comment
on the code state that it is for some unknown reason. Also,
on CHV (gen8 lp) we were already discarding the second CRC
as well to make sure we have a reliable CRC on hand.

So based on all ou tests and bugs it seems that it is not
on CHV that needs to discard 2 first CRCs, but all BDW+
platforms.

Starting on SKL we have this CRC done bit (24), but the
experiments around the use of this bit wasn't that stable
as just discarding the second CRC. So, let's for now
just move with CHV solution for all gen8+ platforms and
make our CI a bit more stable.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=102374
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=101309
Cc: Mika Kahola <mika.kahola@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Tested-by: Mika Kahola <mika.kahola@intel.com>
Reviewed-by: Mika Kahola <mika.kahola@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170928002040.7917-1-rodrigo.vivi@intel.com

drm/i915/psr: Set frames before SU entry for psr2

Set frames before SU entry value for max resync frame count of
dpcd register 2009, bit field 0:3.

v2 :
 - add macro  EDP_PSR2_FRAME_BEFORE_SU (Rodrigo)
 - remove EDP_FRAMES_BEFORE_SU_ENTRY (Rodrigo)
 - add check ==1 for dpcd_read call (ville)

v3 : (Rodrigo)
 - move macro EDP_PSR2_FRAME_BEFORE_SU after EDP_PSR2_FRAME_BEFORE_SU
 - replace with &=

v4 :
 - change the macro to shift value (jani)
 - updated register names

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
CC: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506419953-32605-2-git-send-email-vathsala.nagaraju@intel.com

drm/dp: Add defines for latency in sink

Add defines for dpcd register 2009 (synchronization latency
in sink).

v2:
 - add spec version (Daniel)
 - use register name as is in spec,only drop excess
   from end (jani)
 - add the full register contents (jani)
[Rodrigo fixed spec version when merging]

Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
CC: Puthikorn Voravootivat <puthik@chromium.org>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Signed-off-by: Vathsala Nagaraju <vathsala.nagaraju@intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1506419953-32605-1-git-send-email-vathsala.nagaraju@intel.com
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>

Merge drm-upstream/drm-next into drm-intel-next-queued

Need MST sideband message transaction to power up/down nodes.

Signed-off-by: Jani Nikula <jani.nikula@intel.com>

drm/i915: Allow optimized platform checks

If we store the platform as a bitmask, and convert the
IS_PLATFORM macro to use it, we allow the compiler to
merge the IS_PLATFORM(a) || IS_PLATFORM(b) || ... checks
into a single conditional.

As a secondary benefit this saves almost 1k of text:

    text           data     bss     dec     hex filename
-1460254          60014    3656 1523924  1740d4 drivers/gpu/drm/i915/i915.ko
+1459260          60026    3656 1522942  173cfe drivers/gpu/drm/i915/i915.ko

v2: Removed the infamous -1.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Acked-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170927164138.15474-1-tvrtko.ursulin@linux.intel.com

Merge branch 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux into drm-next

First feature pull for 4.15.  Highlights:
- Per VM BO support
- Lots of powerplay cleanups
- Powerplay support for CI
- pasid mgr for kfd
- interrupt infrastructure for recoverable page faults
- SR-IOV fixes
- initial GPU reset for vega10
- prime mmap support
- ttm page table debugging improvements
- lots of bug fixes

* 'drm-next-4.15' of git://people.freedesktop.org/~agd5f/linux: (232 commits)
  drm/amdgpu: clarify license in amdgpu_trace_points.c
  drm/amdgpu: Add gem_prime_mmap support
  drm/amd/powerplay: delete dead code in smumgr
  drm/amd/powerplay: delete SMUM_FIELD_MASK
  drm/amd/powerplay: delete SMUM_WAIT_INDIRECT_FIELD
  drm/amd/powerplay: delete SMUM_READ_FIELD
  drm/amd/powerplay: delete SMUM_SET_FIELD
  drm/amd/powerplay: delete SMUM_READ_VFPF_INDIRECT_FIELD
  drm/amd/powerplay: delete SMUM_WRITE_VFPF_INDIRECT_FIELD
  drm/amd/powerplay: delete SMUM_WRITE_FIELD
  drm/amd/powerplay: delete SMU_WRITE_INDIRECT_FIELD
  drm/amd/powerplay: move macros to hwmgr.h
  drm/amd/powerplay: move PHM_WAIT_VFPF_INDIRECT_FIELD to hwmgr.h
  drm/amd/powerplay: move SMUM_WAIT_VFPF_INDIRECT_FIELD_UNEQUAL to hwmgr.h
  drm/amd/powerplay: move SMUM_WAIT_INDIRECT_FIELD_UNEQUAL to hwmgr.h
  drm/amd/powerplay: add new helper functions in hwmgr.h
  drm/amd/powerplay: use SMU_IND_INDEX/DATA_11 pair
  drm/amd/powerplay: refine powerplay code.
  drm/amd/powerplay: delete dead code in hwmgr.h
  drm/amd/powerplay: refine interface in struct pp_smumgr_func
  ...

Merge tag 'drm-intel-next-2017-09-07' of git://anongit.freedesktop.org/git/drm-intel into drm-next

Getting started with v4.15 features:

- Cannonlake workarounds (Rodrigo, Oscar)
- Infoframe refactoring and fixes to enable infoframes for DP (Ville)
- VBT definition updates (Jani)
- Sparse warning fixes (Ville, Chris)
- Crtc state usage fixes and cleanups (Ville)
- DP vswing, pre-emph and buffer translation refactoring and fixes (Rodrigo)
- Prevent IPS from interfering with CRC capture (Ville, Marta)
- Enable Mesa to advertise ARB_timer_query (Nanley)
- Refactor GT number into intel_device_info (Lionel)
- Avoid eDP DP AUX CH timeouts harder (Manasi)
- CDCLK check improvements (Ville)
- Restore GPU clock boost on missed pageflip vblanks (Chris)
- Fence register reservation API for vGPU (Changbin)
- First batch of CCS fixes (Ville)
- Finally, numerous GEM fixes, cleanups and improvements (Chris)

* tag 'drm-intel-next-2017-09-07' of git://anongit.freedesktop.org/git/drm-intel: (100 commits)
  drm/i915: Update DRIVER_DATE to 20170907
  drm/i915/cnl: WaThrottleEUPerfToAvoidTDBackPressure:cnl(pre-prod)
  drm/i915: Lift has-pinned-pages assert to caller of ____i915_gem_object_get_pages
  drm/i915: Display WA #1133 WaFbcSkipSegments:cnl, glk
  drm/i915/cnl: Allow the reg_read ioctl to read the RCS TIMESTAMP register
  drm/i915: Move device_info.has_snoop into the static tables
  drm/i915: Disable MI_STORE_DATA_IMM for i915g/i915gm
  drm/i915: Re-enable GTT following a device reset
  drm/i915/cnp: Wa 1181: Fix Backlight issue
  drm/i915: Annotate user relocs with __user
  drm/i915: Constify load detect mode
  drm/i915/perf: Remove __user from u64 in drm_i915_perf_oa_config
  drm/i915: Silence sparse by using gfp_t
  drm/i915: io unmap functions want __iomem
  drm/i915: Add __rcu to radix tree slot pointer
  drm/i915: Wake up the device for the fbdev setup
  drm/i915: Add interface to reserve fence registers for vGPU
  drm/i915: Use correct path to trace include
  drm/i915: Fix the missing PPAT cache attributes on CNL
  drm/i915: Fix enum pipe vs. enum transcoder for the PCH transcoder
  ...

Merge tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc into drm-next

UAPI Changes:

Cross-subsystem Changes:

Core Changes:
- DP SDP defines (Ville)
- polish for scdc helpers (Thierry Reding)
- fix lifetimes for connector/plane state across crtc changes (Maarten
  Lankhorst).
- sparse fixes (Ville+Thierry)
- make legacy kms ioctls all interruptible (Maarten)
- push edid override into the edid helpers (out of probe helpers)
  (Jani)
- DP ESI defines for link status (DK)

Driver Changes:
- drm-panel is now in drm-misc!
- minor panel-simple cleanups/refactoring by various folks
- drm_bridge_add cleanup (Inki Dae)
- constify a few i2c_device_id structs (Arvind Yadav)
- More patches from Noralf's fb/gem helper cleanup
- bridge/synopsis: reset fix (Philippe Cornu)
- fix tracepoint include handling in drivers (Thierry)
- rockchip: lvds support (Sandy Huang)
- move sun4i into drm-misc fold (Maxime Ripard)
- sun4i: refactor driver load + support TCON backend/layer muxing
  (Chen-Yu Tsai)
- pl111: support more pl11x variants (Linus Walleij)
- bridge/adv7511: robustify probing/edid handling (Lars-Petersen
  Clausen)

New hw support:
- S6E63J0X03 panel (Hoegeun Kwon)
- OTM8009A panel (Philippe CORNU)
- Seiko 43WVF1G panel (Marco Franchi)
- tve200 driver (Linus Walleij)

Plus assorted of tiny patches all over, including our first outreachy
patches from applicants for the winter round!

* tag 'drm-misc-next-2017-09-20' of git://anongit.freedesktop.org/git/drm-misc: (101 commits)
  drm: add backwards compatibility support for drm_kms_helper.edid_firmware
  drm: handle override and firmware EDID at drm_do_get_edid() level
  drm/dp: DPCD register defines for link status within ESI field
  drm/rockchip: Replace dev_* with DRM_DEV_*
  drm/tinydrm: Drop driver registered message
  drm/gem-fb-helper: Use debug message on gem lookup failure
  drm/imx: Use drm_gem_fb_create() and drm_gem_fb_prepare_fb()
  drm/bridge: adv7511: Constify HDMI CODEC platform data
  drm/bridge: adv7511: Enable connector polling when no interrupt is specified
  drm/bridge: adv7511: Remove private copy of the EDID
  drm/bridge: adv7511: Properly update EDID when no EDID was found
  drm/crtc: Convert setcrtc ioctl locking to interruptible.
  drm/atomic: Convert pageflip ioctl locking to interruptible.
  drm/legacy: Convert setplane ioctl locking to interruptible.
  drm/legacy: Convert cursor ioctl locking to interruptible.
  drm/atomic: Convert atomic ioctl locking to interruptible.
  drm/atomic: Prepare drm_modeset_lock infrastructure for interruptible waiting, v2.
  drm/tve200: Clean up panel bridging
  drm/doc: Update todo.rst
  drm/dp/mst: Sideband message transaction to power up/down nodes
  ...

drm/i915: Avoid using dev_priv->info.gen directly.

Let's stop this usage before it spreads so much.

1. This check is not part of usual searches happening when adding
new platform.
2. There is already a duplication here with INTEL_INFO(dev_priv)->gen
and INTEL_GEN(dev_priv).

So let's please avoid yet another way.

Cc: Lyude <cpaul@redhat.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Daniel Vetter <daniel.vetter@intel.com>
Cc: Radhakrishna Sripada <radhakrishna.sripada@intel.com>
Cc: Hans de Goede <hdegoede@redhat.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Paulo Zanoni <paulo.r.zanoni@intel.com>
Cc: Ville Syrjala <ville.syrjala@linux.intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Shashank Sharma <shashank.sharma@intel.com>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Paulo Zanoni <paulo.r.zanoni@intel.com>
Reviewed-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170926211346.12009-1-rodrigo.vivi@intel.com

i915: Use %pS printk format for direct addresses

Use the %pS printk format for printing symbols from direct addresses.
This is important for the ia64, ppc64 and parisc64 architectures, while on
other architectures there is no difference between %pS and %pF.
Fix it for consistency across the kernel.

Signed-off-by: Helge Deller <deller@gmx.de>
Cc: Jani Nikula <jani.nikula@linux.intel.com>
Cc: David Airlie <airlied@linux.ie>
Cc: intel-gfx@lists.freedesktop.org
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Link: https://patchwork.freedesktop.org/patch/msgid/1504729681-3504-6-git-send-email-deller@gmx.de

drm/i915/execlists: Notify context-out for lost requests

When cancelling requests, also send the notification to any listeners
(gvt) that the request is no longer scheduled on hw. They may require to
keep the in/out exactly balanced, and so the reuse after the reset may
confuse the listener.

Fixes: 221ab9719bf3 ("drm/i915/execlists: Unwind incomplete requests on resets")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: "Zhenyu Wang" <zhenyuw@linux.intel.com>
Cc: "Wang, Zhi A" <zhi.a.wang@intel.com>
Cc: Michał Winiarski <michal.winiarski@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170926101720.9479-1-chris@chris-wilson.co.uk
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>

drm/i915/cnl: Add support slice/subslice/eu configs

Cannonlake Slice and Subslice information has changed.

This patch initially provided by Ben adds the proper sseu
initialization.

v2: This v2 done by Rodrigo includes:
    - Fix on Total slices count by avoiding [1][2] and [2][2].
    - Inclusion of EU Per Subslice.
    - Commit message.
v3: This v3 done by Rodrigo includes:
    - Handle all possible bits and extra fuse register.
    - Use INTEL_GEN macro.
    - Fully assume uniform distribution so remove union
      with eu_per_subslice and add proper the comment.
v4: This v4 done by Rodrigo includes:
    - Consider all bits available: 6 bits for slices [27:22]
      and 4 for subslices [21:18].
v5: This v5 done by Rodrigo includes:
    - sseu->subslice_mask = (1 << 4) - 1 - missed on previous
    versions and noticed by Oscar.

Cc: Oscar Mateo <oscar.mateo@intel.com>
Signed-off-by: Ben Widawsky <ben@bwidawsk.net>
Signed-off-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Oscar Mateo <oscar.mateo@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20170920183525.20530-1-rodrigo.vivi@intel.com

drm/amdgpu: clarify license in amdgpu_trace_points.c

It was not clear.  The rest of the driver is MIT/X11.

Reviewed-by: Christian König <christian.koenig@amd.com>
Acked-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add gem_prime_mmap support

v2: drop hdp invalidate/flush.
v3: honor pgoff during prime mmap. Add a barrier after cpu access.
v4: drop begin/end_cpu_access() for now, revisit later.

Signed-off-by: Samuel Li <Samuel.Li@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete dead code in smumgr

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete SMUM_FIELD_MASK

repeated defining in hwmgr.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete SMUM_WAIT_INDIRECT_FIELD

repeated defining in hwmgr.h
use PHM_WAIT_INDIRECT_FIELD instand.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete SMUM_READ_FIELD

repeated defining in hwmgr.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete SMUM_SET_FIELD

repeated defining in hwmgr.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete SMUM_READ_VFPF_INDIRECT_FIELD

repeated defining in hwmgr.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete SMUM_WRITE_VFPF_INDIRECT_FIELD

repeated defining in hwmgr.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete SMUM_WRITE_FIELD

the macro is as same as PHM_WRITE_FIELD

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete SMU_WRITE_INDIRECT_FIELD

the macro is as same as PHM_WRITE_INDIRECT_FIELD

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move macros to hwmgr.h

the macro is not relevant to SMU,
so rename SMU_WAIT_FIELD_UNEQUAL to
PHM_WAIT_FIELD_UNEQUAL and move to hwmgr.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move PHM_WAIT_VFPF_INDIRECT_FIELD to hwmgr.h

the macro is not relevant to SMU, so move to hwmgr.h
and rename to PHM_WAIT_VFPF_INDIRECT_FIELD

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move SMUM_WAIT_VFPF_INDIRECT_FIELD_UNEQUAL to hwmgr.h

the macro is not relevant to SMU, so move to hwmgr.h
and rename to PHM_WAIT_VFPF_INDIRECT_FIELD_UNEQUAL

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: move SMUM_WAIT_INDIRECT_FIELD_UNEQUAL to hwmgr.h

the macro is not relevent to SMU, so move to hwmgr.h
and rename to PHM_WAIT_INDIRECT_FIELD_UNEQUAL

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add new helper functions in hwmgr.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: use SMU_IND_INDEX/DATA_11 pair

in VFPF macros to support virtualization

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: refine powerplay code.

delete struct smumgr, put smu backend function table
in struct hwmgr

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: delete dead code in hwmgr.h

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: refine interface in struct pp_smumgr_func

unify to use struct hwmgr as function parameter in
smumgr.

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: simplify pinning into visible VRAM

Just set the CPU access required flag when we pin it.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:fix firmware memoryleak(v2)

this fix memory leak due to request_firmware after driver
unloaded

v2:
release gmc firmware for gmc6/7/8 as well

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:fix uvd ring fini routine(v2)

fix missing finish uvd enc_ring.
v2:
since the adev pointer check in already in ring_fini
so drop the check outsider

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu/sriov:alloc KIQ MQD in VRAM(v2)

this way after KIQ MQD released in drv unloading, CPC
can still let KIQ access this MQD thus RLCV SAVE_VF
will not fail

v2:
always use VRAM domain for KIQ MQD no matter BM or SRIOV

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:unmap KCQ in gfx hw_fini(v2)

v2:
move kcq_disable out of SRIOV, make it genearal

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu:halt when vm fault

only with this way we can debug the VMC page fault issue

Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Add copy_pte_num_dw member in amdgpu_vm_pte_funcs

Use it to replace the hard coded value in amdgpu_vm_bo_update_mapping().

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix a bug in amdgpu_fill_buffer()

When max_bytes is not 8 bytes aligned and bo size is larger than
max_bytes, the last 8 bytes in a ttm node may be left unchanged.
For example, on pre SDMA 4.0, max_bytes = 0x1fffff, and the bo size
is 0x200000, the problem will happen.

In order to fix the problem, we separately store the max nums of
PTEs/PDEs a single operation can set in amdgpu_vm_pte_funcs
structure, rather than inferring it from bytes limit of SDMA
constant fill, i.e. fill_max_bytes.

Together with the fix, we replace the hard code value "10" in
amdgpu_vm_bo_update_mapping() with the corresponding values from
structure amdgpu_vm_pte_funcs.

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Correct bytes limit for SDMA 3.0 copy and fill

Signed-off-by: Yong Zhao <yong.zhao@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: use 2MB fragment size for GFX6,7 and 8

Use 2MB fragment size by default for older hardware generations as well.

Signed-off-by: Christian König <christian.koenig@amd.com>
Acked-by: John Bridgman <john.bridgman@amd.com>
Reviewed-by: Roger He <Hongbo.He@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: Fix driver reloading failure

SRIOV doesn't implement PMC capability of PCIe, so it can't update
power state by reading PMC register.

Currently, amdgpu driver doesn't disable pci device when removing
driver, the enable_cnt of pci device will not be decrease to 0.
When reloading driver, pci_enable_device will do nothing as
enable_cnt is not zero. And power state will not be updated as PMC
is not support.
So current_state of pci device is not D0 state and pci_enable_msi
return fail.

Add pci_disable_device when remmoving driver to fix the issue.

Signed-off-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: refine phm_register_thermal_interrupt interface

currently, not all asics implement this callback function
so not return error to avoid powerplay initialize failed
in those asices

Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/amdgpu: add vega10/raven mmhub/athub golden settings

Signed-off-by: Evan Quan <evan.quan@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: change alert temperature range

Change to more meaningful range that triggers thermal
interrupts.

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: implement register thermal interrupt for Vega10

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amd/powerplay: add register thermal interrupt in hwmgr_hw_init

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>

drm/amdgpu: add cgs query info of pci bus devfn

Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>