Add generic exit-time stack-depth checking to CONFIG_DEBUG_STACK_USAGE

Add generic exit-time stack-depth checking to CONFIG_DEBUG_STACK_USAGE.

This also adds UML support.

Tested on UML and i386.

[akpm@linux-foundation.org: cleanups, speedups, tweaks]
Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Cc: Oleg Nesterov <oleg@tv-sign.ru>
Cc: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: use get_free_pages to allocate kernel stacks

For some reason, I was using kmalloc instead of get_free_pages for kernel
stacks.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

uml: fix request->sector update

It is theoretically possible for a request to finish and be freed between
writing it to the I/O thread and updating the sector count.  In this case, the
update will dereference a freed pointer.

To avoid this, I delay the update until processing the next sg segment, when
the request pointer is known to be good.

Signed-off-by: Jeff Dike <jdike@linux.intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CRIS: replace old-style member inits with designated inits

Replace the old-style structure member initializers with designated
initializers.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

etrax: enable arbitary speed setting on tty ports

Add the needed constants and bits. The actual code is already in the tty
layer and turned on by the definitions

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Mikael Starvik <starvik@axis.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m32r: A MAINTAINERS entry for the M32R architecture

Signed-off-by: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m32r: enable arbitary speed tty rate setting

Add the defines and constants needed for the M32R platform to support the
arbitary speed tty ioctls.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Hirokazu Takata <takata@linux-m32r.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

arm26: remove broken and unused macro

Signed-off-by: Mariusz Kozlowski <m.kozlowski@tuxland.pl>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ARM26: enable arbitary speed tty ioctls and split input/output speed

Add the ioctls and values needed for this to the ARM26/ARM32 ports.  The
actual code has been in the base kernel for a while and automatically turns
on when a port sets the required defines.

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Russell King <rmk+kernel@arm.linux.org.uk>
Cc: Ian Molton <spyro@f2s.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix alpha ISA support

isa_bus_to_virt() is still needed in a few places (lance.c, at least).  When
we switch the kernel to using -Werror-implicit-function-declaration, the lack
of isa_bus_to_virt() breaks alpha allmodconfig builds.

Add isa_bus_to_virt() and deprecate the ezisting ISA APIs, though it might be
better to define these functions as BUG(), since virt_to_bus/bus_to_virt just
do wrong things on a number of machines.

[akpm@linux-foundation.org: build fix]
Signed-off-by: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

alpha: fix trivial section mismatch warnings

Fix the following section mismatch warnings:
WARNING: arch/alpha/kernel/built-in.o(.text+0x7c78): Section mismatch: reference to .init.text:init_rtc_irq (between 'common_init_rtc' and 'timer_interrupt')
WARNING: arch/alpha/kernel/built-in.o(.text+0x7c7c): Section mismatch: reference to .init.text:init_rtc_irq (between 'common_init_rtc' and 'timer_interrupt')
WARNING: arch/alpha/kernel/built-in.o(.data+0x2c30): Section mismatch: reference to .init.text:srm_console_setup (between 'srmcons' and 'tsunami_pci_ops')

In all three cases functions marked __init was called outside __init context.
So the fix was to just drop the __init attribute.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
Cc: Meelis Roos <mroos@linux.ee>
Cc: Ivan Kokshaysky <ink@jurassic.park.msu.ru>
Cc: Richard Henderson <rth@twiddle.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

h8300 entry.S update

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

h8300: remove unused file

arch/h8300/kernel/ints.c is unused.

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

h8300 zImage support update

- Add missing files
- Add Makefile target
- Change image base
- Style fix

Signed-off-by: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

h8300: enable arbitary speed tty port setup

Add the needed constants and defines to activate the new tty code on this
platform

Signed-off-by: Alan Cox <alan@redhat.com>
Cc: Yoshinori Sato <ysato@users.sourceforge.jp>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: remove old cache management cruft from mm code

Remove cache management cruft.  This code is dead, all the cache manangement
functions for the ColdFire exist in the header file
include/asm-m68knommu/cacheflush.h.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: remove cruft from setup code

Clean out cruft.

. remove include files not needed
. remove not used CAT_ROMARRAY code
. remove generic machine pointers not used
. remove unused functions
. fix email address in copyrights

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

m68knommu: use TRHEAD_SIZE instead of hard constant

Use THREAD_SIZE instead of a hard constant.

Signed-off-by: Philippe De Muyter <phdm@macqel.be>
Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

nommu: stub expand_stack() for nommu case

Be consistent with VM mmap, implement expand_stack().  We can't actually do
anything other than return an error in the no MMU case though.

Signed-off-by: Greg Ungerer <gerg@uclinux.org>
Cc: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

FRV: Remove some dead code

Remove some dead chunks of code that are bounded by preprocessor conditionals
controlled by apparently no-longer available config options.

These are:

CONFIG_BLK_DEV_BLKMEM
CONFIG_CHR_DEV_FLASH
CONFIG_BLK_DEV_FLASH
CONFIG_CONSOLE

[Found by Robert P. J. Day <rpjday@mindspring.com>]

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

FRV: Be (self-)consistent and use CONFIG_GDB_CONSOLE everywhere

Be (self-)consistent and use CONFIG_GDB_CONSOLE everywhere rather than using
CONFIG_GDBSTUB_CONSOLE in some places and not others.  This is also then
consistent with other archs.

Also remove the gdbstub console device() op which doesn't seem to be necessary
now (especially as it doesn't compile).

[Found by Robert P. J. Day <rpjday@mindspring.com>]

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

FRV: Connect up new syscalls

Connect up new system calls.

Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

split mmap

This is a straightforward split of do_mmap_pgoff() into two functions:

 - do_mmap_pgoff() checks the parameters, and calculates the vma
   flags.  Then it calls

 - mmap_region(), which does the actual mapping

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Acked-by: Peter Zijlstra <a.p.zijlstra@chello.nl>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

NeilBrown <neilb@suse.de>

The do_loop_readv_writev implementation of readv breaks out of the loop as
soon as a single read request didn't fill it's buffer:

if (nr != len)
break;

The generic_file_aio_read version doesn't.  So if it hits EOF before the end
of the list of buffers, it will try again on the next buffer.  If the file was
extended in the mean time, this will produce a bad result.

Signed-off-by: Neil Brown <neilb@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

do not limit locked memory when RLIMIT_MEMLOCK is RLIM_INFINITY

Fix a bug in mm/mlock.c on 32-bit architectures that prevents a user from
locking more than 4GB of shared memory, or allocating more than 4GB of
shared memory in hugepages, when rlim[RLIMIT_MEMLOCK] is set to
RLIM_INFINITY.

Signed-off-by: Herbert van den Bergh <herbert.van.den.bergh@oracle.com>
Acked-by: Chris Mason <chris.mason@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slob: sparsemem support

Currently slob is disabled if we're using sparsemem, due to an earlier
patch from Goto-san.  Slob and static sparsemem work without any trouble as
it is, and the only hiccup is a missing slab_is_available() in the case of
sparsemem extreme.  With this, we're rid of the last set of restrictions
for slob usage.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Matt Mackall <mpm@selenic.com>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mspec_mmap: don't set VM_LOCKED

mspec_mmap was setting VM_LOCKED (without adjusting locked_vm): don't do
that, it serves no purpose in 2.6, other than to mess up the locked_vm
accounting - mspec's pages won't get reclaimed anyway.  Thanks to Dmitry
Monakhov for raising the issue.

Signed-off-by: Hugh Dickins <hugh@veritas.com>
Acked-by: Jes Sorensen <jes@sgi.com>
Cc: Dmitry Monakhov <dmonakhov@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/page_alloc.c: lower printk severity

Signed-off-by: Dan Aloni <da-x@monatomic.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slob: initial NUMA support

This adds preliminary NUMA support to SLOB, primarily aimed at systems with
small nodes (tested all the way down to a 128kB SRAM block), whether
asymmetric or otherwise.

We follow the same conventions as SLAB/SLUB, preferring current node
placement for new pages, or with explicit placement, if a node has been
specified.  Presently on UP NUMA this has the side-effect of preferring
node#0 allocations (since numa_node_id() == 0, though this could be
reworked if we could hand off a pfn to determine node placement), so
single-CPU NUMA systems will want to place smaller nodes further out in
terms of node id.  Once a page has been bound to a node (via explicit node
id typing), we only do block allocations from partial free pages that have
a matching node id in the page flags.

The current implementation does have some scalability problems, in that all
partial free pages are tracked in the global freelist (with contention due
to the single spinlock).  However, these are things that are being reworked
for SMP scalability first, while things like per-node freelists can easily
be built on top of this sort of functionality once it's been added.

More background can be found in:

http://marc.info/?l=linux-mm&m=118117916022379&w=2
http://marc.info/?l=linux-mm&m=118170446306199&w=2
http://marc.info/?l=linux-mm&m=118187859420048&w=2

and subsequent threads.

Acked-by: Christoph Lameter <clameter@sgi.com>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Acked-by: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

speed up madvise_need_mmap_write() usage

In the new madvise_need_mmap_write() call we can avoid an extra case
statement and function call as follows.

Signed-off-by: Jason Baron <jbaron@redhat.com>
Cc: Nishanth Aravamudan <nacc@us.ibm.com>
Cc: Christoph Hellwig <hch@lst.de>
Cc: Nick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm/slab.c: start_cpu_timer() should be __cpuinit

start_cpu_timer() should be __cpuinit (which also matches what it's
callers are).

__devinit didn't cause problems, it simply wasted a few bytes of memory
for the common CONFIG_HOTPLUG_CPU=n case.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: more __meminit annotations

Currently zone_spanned_pages_in_node() and zone_absent_pages_in_node() are
non-static for ARCH_POPULATES_NODE_MAP and static otherwise.  However, only
the non-static versions are __meminit annotated, despite only being called
from __meminit functions in either case.

zone_init_free_lists() is currently non-static and not __meminit annotated
either, despite only being called once in the entire tree by
init_currently_empty_zone(), which too is __meminit.  So make it static and
properly annotated.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Yasunori Goto <y-goto@jp.fujitsu.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

kill vmalloc_earlyreserve

This symbol got orphaned quite a while ago.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

page table handling cleanup

Kill pte_rdprotect(), pte_exprotect(), pte_mkread(), pte_mkexec(), pte_read(),
pte_exec(), and pte_user() except where arch-specific code is making use of
them.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: fix improper .init-type section references

.. which modpost started warning about.

Signed-off-by: Jan Beulich <jbeulich@novell.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

numa: mempolicy: trivial debug fixes.

Enabling debugging fails to build due to the nodemask variable in
do_mbind() having changed names, and then oopses on boot due to the
assumption that the nodemask can be dereferenced -- which doesn't work out
so well when the policy is changed to MPOL_DEFAULT with a NULL nodemask by
numa_default_policy().

This fixes it up, and switches from PDprintk() to pr_debug() while
we're at it.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

oom: stop allocating user memory if TIF_MEMDIE is set

get_user_pages() can try to allocate a nearly unlimited amount of memory on
behalf of a user process, even if that process has been OOM killed.  The
OOM kill occurs upon return to user space via a SIGKILL, but
get_user_pages() will try allocate all its memory before returning.  Change
get_user_pages() to check for TIF_MEMDIE, and if set then return
immediately.

Signed-off-by: Ethan Solomita <solo@google.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

numa: mempolicy: dynamic interleave map for system init

This converts the default system init memory policy to use a dynamically
created node map instead of defaulting to all online nodes.  Nodes of a
certain size (>= 16MB) are judged to be suitable for interleave, and are added
to the map.  If all nodes are smaller in size, the largest one is
automatically selected.

Without this, tiny nodes find themselves out of memory before we even make it
to userspace.  Systems with large nodes will notice no change.

Only the system init policy is effected by this change, the regular
MPOL_DEFAULT policy is still switched to later on in the boot process as
normal.

Signed-off-by: Paul Mundt <lethal@linux-sh.org>
Cc: Andi Kleen <ak@suse.de>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Hugh Dickins <hugh@veritas.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

SLUB: support slub_debug on by default

Add a new configuration variable

CONFIG_SLUB_DEBUG_ON

If set then the kernel will be booted by default with slab debugging
switched on. Similar to CONFIG_SLAB_DEBUG. By default slab debugging
is available but must be enabled by specifying "slub_debug" as a
kernel parameter.

Also add support to switch off slab debugging for a kernel that was
built with CONFIG_SLUB_DEBUG_ON. This works by specifying

slub_debug=-

as a kernel parameter.

Dave Jones wanted this feature.
http://marc.info/?l=linux-kernel&m=118072189913045&w=2

[akpm@linux-foundation.org: clean up switch statement]
Signed-off-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

invalidate_mapping_pages(): add cond_resched

invalidate_mapping_pages() can sometimes take a long time (millions of pages
to free).  Long enough for the softlockup detector to trigger.

We used to have a cond_resched() in there but I took it out because the
drop_caches code calls invalidate_mapping_pages() under inode_lock.

The patch adds a nasty flag and puts the cond_resched() back.

Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

mm: debug check for the fault vs invalidate race

Add a bugcheck for Andrea's pagefault vs invalidate race.  This is triggerable
for both linear and nonlinear pages with a userspace test harness (using
direct IO and truncate, respectively).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: fix race in alloc_fresh_huge_page()

That static `nid' index needs locking.  Without it we can end up calling
alloc_pages_node() with an illegal node ID and the kernel crashes.

Acked-by: gurudas pai <gurudas.pai@oracle.com>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

vmscan: fix comments related to shrink_list()

Fix the shrink_list name on some files under mm/ directory.

Signed-off-by: Anderson Briglia <anderson.briglia@indt.org.br>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slob: improved alignment handling

Remove the core slob allocator's minimum alignment restrictions, and instead
introduce the alignment restrictions at the slab API layer.  This lets us heed
the ARCH_KMALLOC/SLAB_MINALIGN directives, and also use __alignof__ (unsigned
long) for the default alignment (which should allow relaxed alignment
architectures to take better advantage of SLOB's small minimum alignment).

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slob: remove bigblock tracking

Remove the bigblock lists in favour of using compound pages and going directly
to the page allocator.  Allocation size is stored in page->private, which also
makes ksize more accurate than it previously was.

Saves ~.5K of code, and 12-24 bytes overhead per >= PAGE_SIZE allocation.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

slob: rework freelist handling

Improve slob by turning the freelist into a list of pages using struct page
fields, then each page has a singly linked freelist of slob blocks via a
pointer in the struct page.

- The first benefit is that the slob freelists can be indexed by a smaller
  type (2 bytes, if the PAGE_SIZE is reasonable).

- Next is that freeing is much quicker because it does not have to traverse
  the entire freelist. Allocation can be slightly faster too, because we can
  skip almost-full freelist pages completely.

- Slob pages are then freed immediately when they become empty, rather than
  having a periodic timer try to free them. This gives efficiency and memory
  consumption improvement.

Then, we don't encode seperate size and next fields into each slob block,
rather we use the sign bit to distinguish between "size" or "next". Then
size 1 blocks contain a "next" offset, and others contain the "size" in
the first unit and "next" in the second unit.

- This allows minimum slob allocation alignment to go from 8 bytes to 2
  bytes on 32-bit and 12 bytes to 2 bytes on 64-bit. In practice, it is
  best to align them to word size, however some architectures (eg. cris)
  could gain space savings from turning off this extra alignment.

Then, make kmalloc use its own slob_block at the front of the allocation
in order to encode allocation size, rather than rely on not overwriting
slob's existing header block.

- This reduces kmalloc allocation overhead similarly to alignment reductions.

- Decouples kmalloc layer from the slob allocator.

Then, add a page flag specific to slob pages.

- This means kfree of a page aligned slob block doesn't have to traverse
  the bigblock list.

I would get benchmarks, but my test box's network doesn't come up with
slob before this patch. I think something is timing out. Anyway, things
are faster after the patch.

Code size goes up about 1K, however dynamic memory usage _should_ be
lower even on relatively small memory systems.

Future todo item is to restore the cyclic free list search, rather than
to always begin at the start.

Signed-off-by: Nick Piggin <npiggin@suse.de>
Acked-by: Matt Mackall <mpm@selenic.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Remove the deprecated "kmem_cache_t" typedef from slab.h.

Given that there is no remaining usage of the deprecated kmem_cache_t
typedef anywhere in the tree, remove that typedef.

Signed-off-by: Robert P. J. Day <rpjday@mindspring.com>
Acked-by: Pekka Enberg <penberg@cs.helsinki.fi>
Acked-by: Christoph Lameter <clameter@sgi.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MM: alloc_large_system_hash() can free some memory for non power-of-two bucketsize

alloc_large_system_hash() is called at boot time to allocate space for
several large hash tables.

Lately, TCP hash table was changed and its bucketsize is not a power-of-two
anymore.

On most setups, alloc_large_system_hash() allocates one big page (order >
0) with __get_free_pages(GFP_ATOMIC, order).  This single high_order page
has a power-of-two size, bigger than the needed size.

We can free all pages that wont be used by the hash table.

On a 1GB i386 machine, this patch saves 128 KB of LOWMEM memory.

TCP established hash table entries: 32768 (order: 6, 393216 bytes)

Signed-off-by: Eric Dumazet <dada1@cosmosbay.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Make /proc/slabinfo use seq_list_xxx helpers

This entry prints a header in .start callback.  This is OK, but the more
elegant solution would be to move this into the .show callback and use
seq_list_start_head() in .start one.

I have left it as is in order to make the patch just switch to new API and
noting more.

[adobriyan@sw.ru: Wrong pointer was used as kmem_cache pointer]
Signed-off-by: Pavel Emelianov <xemul@openvz.org>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: Alexey Dobriyan <adobriyan@sw.ru>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

MM: use DIV_ROUND_UP() in mm/memory.c

Replace a hand coded version of DIV_ROUND_UP().

Signed-off-by: Rolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

hugetlb: remove unnecessary nid initialization

nid is initialized to numa_node_id() but will either be overwritten in
the loop or not used in the conditional. So remove the initialization.

Signed-off-by: Nishanth Aravamudan <nacc@us.ibm.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

change zonelist order: zonelist order selection logic

Make zonelist creation policy selectable from sysctl/boot option v6.

This patch makes NUMA's zonelist (of pgdat) order selectable.
Available order are Default(automatic)/ Node-based / Zone-based.

[Default Order]
The kernel selects Node-based or Zone-based order automatically.

[Node-based Order]
This policy treats the locality of memory as the most important parameter.
Zonelist order is created by each zone's locality. This means lower zones
(ex. ZONE_DMA) can be used before higher zone (ex. ZONE_NORMAL) exhausion.
IOW. ZONE_DMA will be in the middle of zonelist.
current 2.6.21 kernel uses this.

Pros.
 * A user can expect local memory as much as possible.
Cons.
 * lower zone will be exhansted before higher zone. This may cause OOM_KILL.

Maybe suitable if ZONE_DMA is relatively big and you never see OOM_KILL
because of ZONE_DMA exhaution and you need the best locality.

(example)
assume 2 node NUMA. node(0) has ZONE_DMA/ZONE_NORMAL, node(1) has ZONE_NORMAL.

*node(0)'s memory allocation order:

 node(0)'s NORMAL -> node(0)'s DMA -> node(1)'s NORMAL.

*node(1)'s memory allocation order:

 node(1)'s NORMAL -> node(0)'s NORMAL -> node(0)'s DMA.

[Zone-based order]
This policy treats the zone type as the most important parameter.
Zonelist order is created by zone-type order. This means lower zone
never be used bofere higher zone exhaustion.
IOW. ZONE_DMA will be always at the tail of zonelist.

Pros.
 * OOM_KILL(bacause of lower zone) occurs only if the whole zones are exhausted.
Cons.
 * memory locality may not be best.

(example)
assume 2 node NUMA. node(0) has ZONE_DMA/ZONE_NORMAL, node(1) has ZONE_NORMAL.

*node(0)'s memory allocation order:

 node(0)'s NORMAL -> node(1)'s NORMAL -> node(0)'s DMA.

*node(1)'s memory allocation order:

 node(1)'s NORMAL -> node(0)'s NORMAL -> node(0)'s DMA.

bootoption "numa_zonelist_order=" and proc/sysctl is supporetd.

command:
%echo N > /proc/sys/vm/numa_zonelist_order

Will rebuild zonelist in Node-based order.

command:
%echo Z > /proc/sys/vm/numa_zonelist_order

Will rebuild zonelist in Zone-based order.

Thanks to Lee Schermerhorn, he gives me much help and codes.

[Lee.Schermerhorn@hp.com: add check_highest_zone to build_zonelists_in_zone_order]
[akpm@linux-foundation.org: build fix]
Signed-off-by: KAMEZAWA Hiroyuki <kamezawa.hiroyu@jp.fujitsu.com>
Cc: Lee Schermerhorn <lee.schermerhorn@hp.com>
Cc: Christoph Lameter <clameter@sgi.com>
Cc: Andi Kleen <ak@suse.de>
Cc: "jesse.barnes@intel.com" <jesse.barnes@intel.com>
Signed-off-by: Lee Schermerhorn <lee.schermerhorn@hp.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

serial: convert early_uart to earlycon for 8250

Beacuse SERIAL_PORT_DFNS is removed from include/asm-i386/serial.h and
include/asm-x86_64/serial.h.  the serial8250_ports need to be probed late in
serial initializing stage.  the console_init=>serial8250_console_init=>
register_console=>serial8250_console_setup will return -ENDEV, and console
ttyS0 can not be enabled at that time.  need to wait till uart_add_one_port in
drivers/serial/serial_core.c to call register_console to get console ttyS0.
that is too late.

Make early_uart to use early_param, so uart console can be used earlier.  Make
it to be bootconsole with CON_BOOT flag, so can use console handover feature.
and it will switch to corresponding normal serial console automatically.

new command line will be:
console=uart8250,io,0x3f8,9600n8
console=uart8250,mmio,0xff5e0000,115200n8
or
earlycon=uart8250,io,0x3f8,9600n8
earlycon=uart8250,mmio,0xff5e0000,115200n8

it will print in very early stage:
Early serial console at I/O port 0x3f8 (options '9600n8')
console [uart0] enabled
later for console it will print:
console handover: boot [uart0] -> real [ttyS0]

Signed-off-by: <yinghai.lu@sun.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

x86: initial fixmap support

Needed to get fixed virtual address for USB debug and earlycon with mmio.

Signed-off-by: Eric W. Biderman <ebiderman@xmisson.com>
Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

console: console handover to preferred console

for earlyprintk=ttyS0,9600 console=tty0 console=ttyS0,9600n8

the handover will happen from earlyser0 to tty0.  but what we want is to
hand over to ttyS0.

Later with serial-convert-early_uart-to-earlycon-for-8250.patch,

console=tty0 console=uart8250,io,0x3f8,9600n8

will handover to ttyS0 instead of tty0.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

console: more buf for index parsing

Change name to buf according to the usage as name + index

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Cc: Andi Kleen <ak@suse.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Russell King <rmk@arm.linux.org.uk>
Cc: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

serial: assert DTR for serial console devices

Some RS-232 devices require DTR to be asserted before they can be used.  DTR
is normally asserted in uart_startup() when the port is opened.  But we don't
actually open serial console ports, so assert DTR when the port is added.

BTW:
earlyprintk and early_uart are hard coded to set DTR/RTS.

rmk says

  The only issue I can think of is the possibility for an attached modem to
  auto-answer or maybe even auto-dial before the system is ready for it to do
  so.  Might have an undesirable cost implication for some running with such a
  setup.

  Apart from that, I can't think of any other side effect of this specific
  patch.

Signed-off-by: Yinghai Lu <yinghai.lu@sun.com>
Acked-by: Russell King <rmk@arm.linux.org.uk>
Cc: Andi Kleen <ak@suse.de>
Cc: Bjorn Helgaas <bjorn.helgaas@hp.com>
Cc: Gerd Hoffmann <kraxel@suse.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: add idr_remove_all

Remove all ids from the given idr tree.  idr_destroy() only frees up
unused, cached idp_layers, but this function will remove all id mappings
and leave all idp_layers unused.

A typical clean-up sequence for objects stored in an idr tree, will use
idr_for_each() to free all objects, if necessay, then idr_remove_all() to
remove all ids, and idr_destroy() to free up the cached idr_layers.

Signed-off-by: Kristian Hoegsberg <krh@redhat.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

lib: add idr_for_each()

This patch adds an iterator function for the idr data structure.  Compared
to just iterating through the idr with an integer and idr_find, this
iterator is (almost, but not quite) linear in the number of elements, as
opposed to the number of integers in the range covered by the idr.  This
makes a difference for sparse idrs, but more importantly, it's a nicer way
to iterate through the elements.

The drm subsystem is moving to idr for tracking contexts and drawables, and
with this change, we can use the idr exclusively for tracking these
resources.

[akpm@linux-foundation.org: fix comment]
Signed-off-by: Kristian Hoegsberg <krh@redhat.com>
Cc: Tejun Heo <htejun@gmail.com>
Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

update checkpatch.pl to version 0.07

This version brings a number of new checks, fixes for flase
positives, plus a clarification of the output to better guide use.  Of
note:

  - checks for documentation for new __setup calls
  - clearer reporting where braces and parenthesis are involved
  - reports for closing brace and semi-colon spacing
  - reports on unwanted externs

This patch includes an update to the documentation on checkpatch.pl
itself to clarify when it should be used and to indicate that it
is not intended as the final arbitor of style.

Full changelog:

Andy Whitcroft (19):
      Version: 0.07
      ensure we do not apply control brace checks to preprocesor directives
      add {u,s}{8,16,32,64} to the type matcher
      accept lack of spacing after the semicolons in for (;;)
      report new externs in .c files
      fix up typedef exclusion for function prototypes
      else trailing statements check need to account for \ at end of line
      add enums to the type matcher
      add missing check descriptions
      suppress double reporting of ** spacing
      report on do{ spacing issues
      include an example of the brace/parenthesis in output
      check for spacing after closing braces
      prevent double reports on pointer spacing issues
      handle blank continuation lines on macros
      classify all reports error, warning, or check
      revamp hanging { checks and apply in context
      no spaces after the last ; in a for is ok
      check __setup has a corresponding addition to documentation

David Woodhouse (1):
      limit character set used in patches and descriptions to UTF-8

Signed-off-by: Andy Whitcroft <apw@shadowen.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: "Randy.Dunlap" <rdunlap@xenotime.net>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

LZO1X: fix lzo1x_worst_compress

This is a correction for a macro which gives worst case compressed data
size by LZO1X.

This patch was provided by the LZO author (Markus Oberhumer).

Signed-off-by: Nitin Gupta <nitingupta910@gmail.com>
Cc: "Markus F.X.J. Oberhumer" <markus@oberhumer.com>
Cc: "Richard Purdie" <rpurdie@openedhand.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Add entries to MAINTAINERS for I/OAT and DMAENGINE

Add entries to MAINTAINERS for I/OAT and DMAENGINE

Signed-off-by: Shannon Nelson <shannon.nelson@intel.com>
Cc: Chris Leech <christopher.leech@intel.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

jbd2 commit: fix transaction dropping

We have to check that also the second checkpoint list is non-empty before
dropping the transaction.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

jbd commit: fix transaction dropping

We have to check that also the second checkpoint list is non-empty before
dropping the transaction.

Signed-off-by: Jan Kara <jack@suse.cz>
Cc: Chuck Ebbert <cebbert@redhat.com>
Cc: Kirill Korotaev <dev@openvz.org>
Cc: <linux-ext4@vger.kernel.org>
Cc: <stable@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

authgss build fix

Recent breakage..

net/sunrpc/auth_gss/auth_gss.c:1002: warning: implicit declaration of function 'lock_kernel'
net/sunrpc/auth_gss/auth_gss.c:1004: warning: implicit declaration of function 'unlock_kernel'

Cc: Trond Myklebust <trond.myklebust@fys.uio.no>
Cc: "J. Bruce Fields" <bfields@fieldses.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge git://git.infradead.org/battery-2.6

* git://git.infradead.org/battery-2.6:
  git-battery vs git-acpi
  Power supply class and drivers: remove non obligatory return statements
  pda_power: clean up irq, timer
  MAINTAINERS: Add maintainers for power supply subsystem and drivers

Fixed up trivial conflict in drivers/w1/slaves/w1_ds2760.c manually

Merge /pub/scm/linux/kernel/git/jejb/scsi-misc-2.6

* master.kernel.org:/pub/scm/linux/kernel/git/jejb/scsi-misc-2.6: (166 commits)
  [SCSI] ibmvscsi: convert to use the data buffer accessors
  [SCSI] dc395x: convert to use the data buffer accessors
  [SCSI] ncr53c8xx: convert to use the data buffer accessors
  [SCSI] sym53c8xx: convert to use the data buffer accessors
  [SCSI] ppa: coding police and printk levels
  [SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc
  [SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c
  [SCSI] remove the dead CYBERSTORMIII_SCSI option
  [SCSI] don't build scsi_dma_{map,unmap} for !HAS_DMA
  [SCSI] Clean up scsi_add_lun a bit
  [SCSI] 53c700: Remove printk, which triggers because of low scsi clock on SNI RMs
  [SCSI] sni_53c710: Cleanup
  [SCSI] qla4xxx: Fix underrun/overrun conditions
  [SCSI] megaraid_mbox: use mutex instead of semaphore
  [SCSI] aacraid: add 51245, 51645 and 52245 adapters to documentation.
  [SCSI] qla2xxx: update version to 8.02.00-k1.
  [SCSI] qla2xxx: add support for NPIV
  [SCSI] stex: use resid for xfer len information
  [SCSI] Add Brownie 1200U3P to blacklist
  [SCSI] scsi.c: convert to use the data buffer accessors
  ...

Merge branch 'master' of /linux/kernel/git/davem/net-2.6

* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (53 commits)
  [TCP]: Verify the presence of RETRANS bit when leaving FRTO
  [IPV6]: Call inet6addr_chain notifiers on link down
  [NET_SCHED]: Kill CONFIG_NET_CLS_POLICE
  [NET_SCHED]: act_api: qdisc internal reclassify support
  [NET_SCHED]: sch_dsmark: act_api support
  [NET_SCHED]: sch_atm: act_api support
  [NET_SCHED]: sch_atm: Lindent
  [IPV6]: MSG_ERRQUEUE messages do not pass to connected raw sockets
  [IPV4]: Cleanup call to __neigh_lookup()
  [NET_SCHED]: Revert "avoid transmit softirq on watchdog wakeup" optimization
  [NETFILTER]: nf_conntrack: UDPLITE support
  [NETFILTER]: nf_conntrack: mark protocols __read_mostly
  [NETFILTER]: x_tables: add connlimit match
  [NETFILTER]: Lower *tables printk severity
  [NETFILTER]: nf_conntrack: Don't track locally generated special ICMP error
  [NETFILTER]: nf_conntrack: Introduces nf_ct_get_tuplepr and uses it
  [NETFILTER]: nf_conntrack: make l3proto->prepare() generic and renames it
  [NETFILTER]: nf_conntrack: Increment error count on parsing IPv4 header
  [NET]: Add ethtool support for NETIF_F_IPV6_CSUM devices.
  [AF_IUCV]: Add lock when updating accept_q
  ...

Merge branch 'for-linus' of git://git./linux/kernel/git/ericvh/v9fs

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ericvh/v9fs:
  9p: fix a race condition bug in umount which caused a segfault
  9p: re-enable mount time debug option
  9p: cache meta-data when cache=loose
  net/9p: set error to EREMOTEIO if trans->write returns zero
  net/9p: change net/9p module name to 9pnet
  9p: Reorganization of 9p file system code

Merge branch 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6

* 'for-linus' of git://oss.sgi.com:8090/xfs/xfs-2.6: (37 commits)
  [XFS] Fix lockdep annotations for xfs_lock_inodes
  [LIB]: export radix_tree_preload()
  [XFS] Fix XFS_IOC_FSBULKSTAT{,_SINGLE} & XFS_IOC_FSINUMBERS in compat mode
  [XFS] Compat ioctl handler for handle operations
  [XFS] Compat ioctl handler for XFS_IOC_FSGEOMETRY_V1.
  [XFS] Clean up function name handling in tracing code
  [XFS] Quota inode has no parent.
  [XFS] Concurrent Multi-File Data Streams
  [XFS] Use uninitialized_var macro to stop warning about rtx
  [XFS] XFS should not be looking at filp reference counts
  [XFS] Use is_power_of_2 instead of open coding checks
  [XFS] Reduce shouting by removing unnecessary macros from dir2 code.
  [XFS] Simplify XFS min/max macros.
  [XFS] Kill off xfs_count_bits
  [XFS] Cancel transactions on xfs_itruncate_start error.
  [XFS] Use do_div() on 64 bit types.
  [XFS] Fix remount,readonly path to flush everything correctly.
  [XFS] Cleanup inode extent size hint extraction
  [XFS] Prevent ENOSPC from aborting transactions that need to succeed
  [XFS] Prevent deadlock when flushing inodes on unmount
  ...

make i2c-acorn tristate

It depends on tristate I2C and it's trivial to make modular.  The
current Kconfig allows I2C=m, I2C_ACORN=y, which doesn't work at
all; alternatives are dependency on I2C=y and making I2C_ACORN
itself a tristate.  The latter is the right thing to do...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>

icside: devm_iounmap() needs linux/io.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Acked-by: Russell King <rmk+kernel@arm.linux.org.uk>

missing argument in bin_attribute ->read()/->write()

Fallout from commit 91a6902958f052358899f58683d44e36228d85c2 ('sysfs:
add parameter "struct bin_attribute *" ...')

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fallout from constified seq_operations

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fallout from Auke's pci ->revision patch

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ax88796: dev_dbg() wants device, not platform device

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

pass -msize-long to sparse on s390

s390 is the only 32bit with unsigned long for size_t (usual for those
is unsigned int).  Tell sparse...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

frv: missing __clear_user()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

zd1211rw: too early inclusion of asm/unaligned.h

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

fix return type of skb_checksum_complete()

It returns __sum16, not unsigned int

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

PDA_POWER depends on having request_irq()

... so all proud owners of s390-based PDAs will have to live without that one

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

ieee1394: forgotten dereference...

Going through the string and waiting for _pointer_ to become '\0'
is not what the authors meant...

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Ben Collins <ben.collins@ubuntu.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

the wrong variable checked after request_irq()

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Acked-by: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

wrong order of arguments of ->readdir()

Shows how many people are testing coda - the bug had been there for 5 years
and results of stepping on it are not subtle.

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

minimal fixes for drivers/usb/gadget/m66592-udc.c

still looks racy (and definitely leaks)

Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

git-battery vs git-acpi

drivers/w1/slaves/w1_ds2760.c:85: warning: initialization from incompatible pointer type

The ACPI guys changed the bin_attr APIs
(commit 91a6902958f052358899f58683d44e36228d85c2)

Cc: Anton Vorontsov <cbou@mail.ru>
Cc: Len Brown <lenb@kernel.org>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>

Power supply class and drivers: remove non obligatory return statements

Per Jeff Garzik request.

Signed-off-by: Jeff Garzik <jeff@garzik.org>
Signed-off-by: Anton Vorontsov <cbou@mail.ru>

pda_power: clean up irq, timer

Clean up pda_power interrupt handling:

Prior to this patch, the driver would pass information it needed
to the interrupt handler dev_id pointer, and then prompt forget it
ever did so, recreating that same information after a couple passes
through the timer-based state machine.

This patch removes the redundant checks by passing the
pda_power_supply[] pointer through the state machine.  The current
code passed 'irq' through the state machine, as an index to recreate
the pointer, when we could more simply pass around the pointer itself.

This patch makes it easier to remove the 'irq' argument in the future,
in addition to cleaning up the driver today.

Signed-off-by: Jeff Garzik <jeff@garzik.org>

MAINTAINERS: Add maintainers for power supply subsystem and drivers

Signed-off-by: Anton Vorontsov <cbou@mail.ru>
Acked-by: David Woodhouse <dwmw2@infradead.org>

[SCSI] ibmvscsi: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Santiago Leon <santil@us.ibm.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] dc395x: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Jamie Lenehan <lenehan@twibble.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] ncr53c8xx: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] sym53c8xx: convert to use the data buffer accessors

- remove the unnecessary map_single path.

- convert to use the new accessors for the sg lists and the
parameters.

Jens Axboe <jens.axboe@oracle.com> did the for_each_sg cleanup.

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
Cc: Matthew Wilcox <matthew@wil.cx>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] ppa: coding police and printk levels

Add printk levels
Clean up some oddities of formatting
Fix goto labels

Signed-off-by: Alan Cox <alan@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] aic7xxx_old: remove redundant GFP_ATOMIC from kmalloc

drivers/scsi/aic7xxx_old.c:aic7xxx_slave_alloc() unnecessarily passes
GFP_ATOMIC (along with GFP_KERNEL) to kmalloc() from a context that is not
atomic. Remove the pointless GFP_ATOMIC.

Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Cc: Doug Ledford <dledford@redhat.com>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] i2o: remove redundant GFP_ATOMIC from kmalloc from device.c

drivers/message/i2o/device.c:i2o_parm_field_get() unnecessarily passes
GFP_ATOMIC (along with GFP_KERNEL) to kmalloc() from a context that is not
atomic. Remove the pointless GFP_ATOMIC.

Signed-off-by: Satyam Sharma <ssatyam@cse.iitk.ac.in>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[SCSI] remove the dead CYBERSTORMIII_SCSI option

Not converted to the 2.6 kconfig system and no code in the tree.

Signed-off-by: Adrian Bunk <bunk@stusta.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: James Bottomley <James.Bottomley@SteelEye.com>

[TCP]: Verify the presence of RETRANS bit when leaving FRTO

For yet unknown reason, something cleared SACKED_RETRANS bit
underneath FRTO.

Signed-off-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>

[IPV6]: Call inet6addr_chain notifiers on link down

Currently if the link is brought down via ip link or ifconfig down,
the inet6addr_chain notifiers are not called even though all
the addresses are removed from the interface.  This caused SCTP
to add duplicate addresses to it's list.

Signed-off-by: Vlad Yasevich <vladislav.yasevich@hp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

[NET_SCHED]: Kill CONFIG_NET_CLS_POLICE

The NET_CLS_ACT option is now a full replacement for NET_CLS_POLICE,
remove the old code. The config option will be kept around to select
the equivalent NET_CLS_ACT options for a short time to allow easier
upgrades.

Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>