Scott Bauer [Wed, 22 Feb 2017 17:15:07 +0000 (10:15 -0700)]
nvme/pci: re-check security protocol support after reset
A device may change capabilities after each reset, e.g. due to a firmware
upgrade. We should thus check for Security Send/Receive and OPAL support
after each reset.
Based on patches from Christoph and Keith.
Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Scott Bauer [Wed, 22 Feb 2017 17:15:06 +0000 (10:15 -0700)]
block/sed-opal: Introduce free_opal_dev to free the structure and clean up state
Before we free the opal structure we need to clean up any saved
locking ranges that the user had told us to unlock from a suspend.
Signed-off-by: Scott Bauer <scott.bauer@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Daniel Roschka [Wed, 22 Feb 2017 22:17:29 +0000 (15:17 -0700)]
nvme: detect NVMe controller in recent MacBooks
Adds support for detection of the NVMe controller found in the
following recent MacBooks:
- Retina MacBook 2016 (MacBook9,1)
- 13" MacBook Pro 2016 without Touch Bar (MacBook13,1)
- 13" MacBook Pro 2016 with Touch Bar (MacBook13,2)
Signed-off-by: Daniel Roschka <danielroschka@phoenitydawn.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Max Gurtovoy [Sun, 19 Feb 2017 18:08:03 +0000 (20:08 +0200)]
nvme-rdma: add support for host_traddr
This will enable the user to control the specific interface for
connection establishment in case the host has more than 1 interface
under the same subnet.
E.g:
Host interfaces configured as:
- ib0 1.1.1.1/16
- ib1 1.1.1.2/16
Target interfaces configured as:
- ib0 1.1.1.3/16 (listener interface)
- ib1 1.1.1.4/16
the following connect command will go through host iface ib0 (default):
nvme connect -t rdma -n testsubsystem -a 1.1.1.3 -s 1023
but the following command will go through host iface ib1:
nvme connect -t rdma -n testsubsystem -a 1.1.1.3 -s 1023 -w 1.1.1.2
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Christophe JAILLET [Sun, 19 Feb 2017 19:04:38 +0000 (20:04 +0100)]
nvmet-rdma: Fix error handling
According to the preceeding goto, it is likely that 'out_destroy_sq' was
expected here.
Signed-off-by: Christophe JAILLET <christophe.jaillet@wanadoo.fr>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Max Gurtovoy [Mon, 20 Feb 2017 11:44:29 +0000 (13:44 +0200)]
nvmet-rdma: use nvme cm status helper
Also remove redundant debug prints.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Max Gurtovoy [Mon, 20 Feb 2017 11:44:28 +0000 (13:44 +0200)]
nvme-rdma: move nvme cm status helper to .h file
This will enable the usage for nvme rdma target.
Also move from a lookup array to a switch statement.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
James Smart [Fri, 17 Feb 2017 15:57:28 +0000 (07:57 -0800)]
nvme-fc: don't bother to validate ioccsz and iorcsz
Discovery controllers don't set the values. They are in reserved
areas of the Identify Controller data structure.
Given the cmd completed, the minimal capsule sizes are supported,
so no need to check nqn to detect discovery controllers and
special case validations.
Signed-off-by: James Smart <james.smart@broadcom.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Keith Busch [Fri, 10 Feb 2017 23:15:52 +0000 (18:15 -0500)]
nvme/pci: No special case for queue busy on IO
This driver previously required we have a special check for IO submitted
to nvme IO queues that are temporarily suspended. That is no longer
necessary since blk-mq provides a quiesce, so any IO that actually gets
submitted to such a queue must be ended since the queue isn't going to
start back up.
This is fixing a condition where we have fewer IO queues after a
controller reset. This may happen if the number of CPU's has changed,
or controller firmware update changed the queue count, for example.
While it may be possible to complete the IO on a different queue, the
block layer does not provide a way to resubmit a request on a different
hardware context once the request has entered the queue. We don't want
these requests to be stuck indefinitely either, so ending them in error
is our only option at the moment.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Keith Busch [Fri, 10 Feb 2017 23:15:51 +0000 (18:15 -0500)]
nvme/core: Fix race kicking freed request_queue
If a namespace has already been marked dead, we don't want to kick the
request_queue again since we may have just freed it from another thread.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Keith Busch [Fri, 10 Feb 2017 23:15:49 +0000 (18:15 -0500)]
nvme/pci: Disable on removal when disconnected
If the device is not present, the driver should disable the queues
immediately. Prior to this, the driver was relying on the watchdog timer
to kill the queues if requests were outstanding to the device, and that
just delays removal up to one second.
Signed-off-by: Keith Busch <keith.busch@intel.com>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Andy Lutomirski [Tue, 7 Feb 2017 18:08:45 +0000 (10:08 -0800)]
nvme: Enable autonomous power state transitions
NVMe devices can advertise multiple power states. These states can
be either "operational" (the device is fully functional but possibly
slow) or "non-operational" (the device is asleep until woken up).
Some devices can automatically enter a non-operational state when
idle for a specified amount of time and then automatically wake back
up when needed.
The hardware configuration is a table. For each state, an entry in
the table indicates the next deeper non-operational state, if any,
to autonomously transition to and the idle time required before
transitioning.
This patch teaches the driver to program APST so that each successive
non-operational state will be entered after an idle time equal to 100%
of the total latency (entry plus exit) associated with that state.
The maximum acceptable latency is controlled using dev_pm_qos
(e.g. power/pm_qos_latency_tolerance_us in sysfs); non-operational
states with total latency greater than this value will not be used.
As a special case, setting the latency tolerance to 0 will disable
APST entirely. On hardware without APST support, the sysfs file will
not be exposed.
The latency tolerance for newly-probed devices is set by the module
parameter nvme_core.default_ps_max_latency_us.
In theory, the device can expose "default" APST table, but this
doesn't seem to function correctly on my device (Samsung 950), nor
does it seem particularly useful. There is also an optional
mechanism by which a configuration can be "saved" so it will be
automatically loaded on reset. This can be configured from
userspace, but it doesn't seem useful to support in the driver.
On my laptop, enabling APST seems to save nearly 1W.
The hardware tables can be decoded in userspace with nvme-cli.
'nvme id-ctrl /dev/nvmeN' will show the power state table and
'nvme get-feature -f 0x0c -H /dev/nvme0' will show the current APST
configuration.
This feature is quirked off on a known-buggy Samsung device.
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Andy Lutomirski [Wed, 22 Feb 2017 20:32:36 +0000 (13:32 -0700)]
nvme: Add a quirk mechanism that uses identify_ctrl
Currently, all NVMe quirks are based on PCI IDs. Add a mechanism to
define quirks based on identify_ctrl's vendor id, model number,
and/or firmware revision.
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Andy Lutomirski <luto@kernel.org>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Johannes Thumshirn [Fri, 27 Jan 2017 08:03:45 +0000 (09:03 +0100)]
nvme: make nvmf_register_transport require a create_ctrl callback
nvmf_create_ctrl() relys on the presence of a create_crtl callback in the
registered nvmf_transport_ops, so make nvmf_register_transport require one.
Update the available call-sites as well to reflect these changes.
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Parav Pandit [Thu, 26 Jan 2017 15:17:28 +0000 (17:17 +0200)]
nvme: Use CNS as 8-bit field and avoid endianness conversion
This patch defines CNS field as 8-bit field and avoids cpu_to/from_le
conversions.
Also initialize nvme_command cns value explicitly to NVME_ID_CNS_NS
for readability (don't rely on the fact that NVME_ID_CNS_NS = 0).
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Signed-off-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Max Gurtovoy [Thu, 26 Jan 2017 15:17:27 +0000 (17:17 +0200)]
nvme: add semicolon in nvme_command setting
Reviewed-by: Parav Pandit <parav@mellanox.com>
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Keith Busch <keith.busch@intel.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Max Gurtovoy [Mon, 23 Jan 2017 09:01:12 +0000 (11:01 +0200)]
nvmet: avoid dereferencing nvmet_req
No need to dereference req twice to get the cmd when we already
have it stored in a local variable.
Signed-off-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Parav Pandit <parav@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Sagi Grimberg [Sun, 27 Nov 2016 23:47:40 +0000 (01:47 +0200)]
nvme: Make controller state visible via sysfs
Easier for debugging and testing state machine
transitions.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Sagi Grimberg [Mon, 14 Nov 2016 12:24:21 +0000 (14:24 +0200)]
nvmet: Make cntlid globally unique
We usually log the cntlid which is confusing in case
we have multiple subsystems each with it's own cntlid ida.
Instead make cntlid ida globally unique and log the initial
association.
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Reviewed-by: Johannes Thumshirn <jthumshirn@suse.de>
Reviewed-by: Max Gurtovoy <maxg@mellanox.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
James Smart [Sat, 24 Dec 2016 17:46:44 +0000 (09:46 -0800)]
nvmet_fc: cleanup of abort flag processing in fcp_op_done
Cleanup of abort flag processing in fcp_op_done.
References were unnecessary
Signed-off-by: James Smart <james.smart@broadcom.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Colin Ian King [Tue, 27 Dec 2016 16:04:09 +0000 (16:04 +0000)]
nvme: admin-cmd: fix spelling mistake: "Counld" -> "Could"
trivial fix to spelling mistake in pr_err message
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: Sagi Grimberg <sagi@grimberg.me>
Signed-off-by: Jens Axboe <axboe@fb.com>
Jens Axboe [Wed, 22 Feb 2017 20:19:45 +0000 (13:19 -0700)]
block: get rid of blk-mq default scheduler choice Kconfig entries
The wording in the entries were poor and not understandable
by even deities. Kill the selection for default block scheduler,
and impose a policy with sane defaults.
Architected-by: Linus Torvalds <torvalds@linux-foundation.org>
Reviewed-by: Omar Sandoval <osandov@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Jon Derrick [Wed, 22 Feb 2017 14:55:13 +0000 (07:55 -0700)]
block/sed: Embed function data into the function sequence
By embedding the function data with the function sequence, we can
eliminate the external function data and state variable code. It also
made obvious some other small cleanups.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Scott Bauer <scott.bauer@intel.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Tobin C. Harding [Wed, 22 Feb 2017 06:12:38 +0000 (17:12 +1100)]
cciss: Remove kmalloc cast
Coccinelle emits a warning about casting the return value of
kmalloc(). Coccinelle suggests removing the cast as do
kerneljanitors.
Remove cast from kmalloc() call.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Tobin C. Harding [Wed, 22 Feb 2017 06:12:37 +0000 (17:12 +1100)]
cciss: Fix checkpatch OPEN_BRACE
Checkpatch emits ERROR:OPEN_BRACE: that open brace { should be on the
previous line.
Move open brace to new line. Also add space after if/switch statement
since we introduce more checkpatch errors if not fixed at the same
time.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Tobin C. Harding [Wed, 22 Feb 2017 06:12:36 +0000 (17:12 +1100)]
cciss: Fix checkpatch TRAILING_WHITESPACE
Checkpatch emits 85 trailing whitespace warnings.
Remove trailing whitespace.
Signed-off-by: Tobin C. Harding <me@tobin.cc>
Acked-by: Don Brace <don.brace@microsemi.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Jon Derrick [Tue, 21 Feb 2017 18:59:15 +0000 (11:59 -0700)]
block/sed: Check received header lengths
Add a buffer size check against discovery and response header lengths
before we loop over their buffers.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Scott Bauer <scott.bauer@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Jon Derrick [Tue, 21 Feb 2017 18:59:14 +0000 (11:59 -0700)]
block/sed: Add helper to qualify response tokens
Add helper which verifies the response token is valid and matches the
expected value. Merges token_type and response_get_token.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Scott Bauer <scott.bauer@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Jon Derrick [Tue, 21 Feb 2017 18:59:13 +0000 (11:59 -0700)]
block/sed: Use ssize_t on atom parsers to return errors
The short atom parser can return an errno from decoding but does not
currently return the error as a signed value. Convert all of the parsers
to ssize_t.
Signed-off-by: Jon Derrick <jonathan.derrick@intel.com>
Reviewed-by: Scott Bauer <scott.bauer@intel.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Omar Sandoval [Tue, 21 Feb 2017 18:03:50 +0000 (10:03 -0800)]
scsi_transport_sas: fix BSG ioctl memory corruption
The end_device and sas_host devices support BSG ioctls, but the
request_queue allocated for them isn't set up to allocate the struct
scsi_request payload. This leads to memory corruption in the call to
scsi_req_init() in bsg_map_hdr(), since it will memset past the end of
the allocated request. Fix it by setting ->cmd_size on the allocated
request_queue.
Fixes: 82ed4db499b8 ("block: split scsi_request out of struct request")
Signed-off-by: Omar Sandoval <osandov@fb.com>
Acked-by: Christoph Hellwig <hch@lst.de>
Signed-off-by: Jens Axboe <axboe@fb.com>
Jan Kara [Tue, 21 Feb 2017 17:09:48 +0000 (18:09 +0100)]
block: Revalidate i_bdev reference in bd_aquire()
When a device gets removed, block device inode unhashed so that it is not
used anymore (bdget() will not find it anymore). Later when a new device
gets created with the same device number, we create new block device
inode. However there may be file system device inodes whose i_bdev still
points to the original block device inode and thus we get two active
block device inodes for the same device. They will share the same
gendisk so the only visible differences will be that page caches will
not be coherent and BDIs will be different (the old block device inode
still points to unregistered BDI).
Fix the problem by checking in bd_acquire() whether i_bdev still points
to active block device inode and re-lookup the block device if not. That
way any open of a block device happening after the old device has been
removed will get correct block device inode.
Tested-by: Lekshmi Pillai <lekshmicpillai@in.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Jan Kara [Tue, 21 Feb 2017 17:09:47 +0000 (18:09 +0100)]
block: Unhash also block device inode for the whole device
Iteration over partitions in del_gendisk() omits part0. Add
bdev_unhash_inode() call for the whole device. Otherwise if the device
number gets reused, bdev inode will be still associated with the old
(stale) bdi.
Tested-by: Lekshmi Pillai <lekshmicpillai@in.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Jan Kara [Tue, 21 Feb 2017 17:09:46 +0000 (18:09 +0100)]
block: Move bdev_unhash_inode() after invalidate_partition()
Move bdev_unhash_inode() after invalidate_partition() as
invalidate_partition() looks up bdev and it cannot find the right bdev
inode after bdev_unhash_inode() is called. Thus invalidate_partition()
would not invalidate page cache of the previously used bdev. Also use
part_devt() when calling bdev_unhash_inode() instead of manually
creating the device number.
Tested-by: Lekshmi Pillai <lekshmicpillai@in.ibm.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Jan Kara <jack@suse.cz>
Signed-off-by: Jens Axboe <axboe@fb.com>
Josef Bacik [Wed, 15 Feb 2017 21:49:48 +0000 (16:49 -0500)]
nbd: cleanup workqueue on error properly
If we fail to register the blockdev we need to make sure to destroy the
recv workqueue.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Josef Bacik [Mon, 13 Feb 2017 15:39:47 +0000 (10:39 -0500)]
nbd: set the logical and physical blocksize properly
We noticed when trying to do O_DIRECT to an export on the server side
that we were getting requests smaller than the 4k sectorsize of the
device. This is because the client isn't setting the logical and
physical blocksizes properly for the underlying device. Fix this up by
setting the queue blocksizes and then calling bd_set_size.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Josef Bacik [Tue, 7 Feb 2017 22:10:22 +0000 (17:10 -0500)]
nbd: cleanup ioctl handling
Break the ioctl handling out into helper functions, some of these things
are getting pretty big and unwieldy.
Signed-off-by: Josef Bacik <jbacik@fb.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Christoph Hellwig [Tue, 21 Feb 2017 09:04:55 +0000 (10:04 +0100)]
scsi: zero per-cmd driver data before each I/O
Without this drivers that don't clear the state themselves can see off
effects. For example Hyper-V VMs using the storvsc driver will often
hang during boot due to uncleared Test Unit Ready failures.
Fixes: e9c787e6 ("scsi: allocate scsi_cmnd structures as part of struct request")
Signed-off-by: Christoph Hellwig <hch@lst.de>
Reported-by: Dexuan Cui <decui@microsoft.com>
Tested-by: Dexuan Cui <decui@microsoft.com>
Reviewed-by: Bart Van Assche <bart.vanassche@sandisk.com>
Signed-off-by: Jens Axboe <axboe@fb.com>
Linus Torvalds [Tue, 21 Feb 2017 18:57:33 +0000 (10:57 -0800)]
Merge tag 'for-4.11/linus-merge-signed' of git://git.kernel.dk/linux-block
Pull block layer updates from Jens Axboe:
- blk-mq scheduling framework from me and Omar, with a port of the
deadline scheduler for this framework. A port of BFQ from Paolo is in
the works, and should be ready for 4.12.
- Various fixups and improvements to the above scheduling framework
from Omar, Paolo, Bart, me, others.
- Cleanup of the exported sysfs blk-mq data into debugfs, from Omar.
This allows us to export more information that helps debug hangs or
performance issues, without cluttering or abusing the sysfs API.
- Fixes for the sbitmap code, the scalable bitmap code that was
migrated from blk-mq, from Omar.
- Removal of the BLOCK_PC support in struct request, and refactoring of
carrying SCSI payloads in the block layer. This cleans up the code
nicely, and enables us to kill the SCSI specific parts of struct
request, shrinking it down nicely. From Christoph mainly, with help
from Hannes.
- Support for ranged discard requests and discard merging, also from
Christoph.
- Support for OPAL in the block layer, and for NVMe as well. Mainly
from Scott Bauer, with fixes/updates from various others folks.
- Error code fixup for gdrom from Christophe.
- cciss pci irq allocation cleanup from Christoph.
- Making the cdrom device operations read only, from Kees Cook.
- Fixes for duplicate bdi registrations and bdi/queue life time
problems from Jan and Dan.
- Set of fixes and updates for lightnvm, from Matias and Javier.
- A few fixes for nbd from Josef, using idr to name devices and a
workqueue deadlock fix on receive. Also marks Josef as the current
maintainer of nbd.
- Fix from Josef, overwriting queue settings when the number of
hardware queues is updated for a blk-mq device.
- NVMe fix from Keith, ensuring that we don't repeatedly mark and IO
aborted, if we didn't end up aborting it.
- SG gap merging fix from Ming Lei for block.
- Loop fix also from Ming, fixing a race and crash between setting loop
status and IO.
- Two block race fixes from Tahsin, fixing request list iteration and
fixing a race between device registration and udev device add
notifiations.
- Double free fix from cgroup writeback, from Tejun.
- Another double free fix in blkcg, from Hou Tao.
- Partition overflow fix for EFI from Alden Tondettar.
* tag 'for-4.11/linus-merge-signed' of git://git.kernel.dk/linux-block: (156 commits)
nvme: Check for Security send/recv support before issuing commands.
block/sed-opal: allocate struct opal_dev dynamically
block/sed-opal: tone down not supported warnings
block: don't defer flushes on blk-mq + scheduling
blk-mq-sched: ask scheduler for work, if we failed dispatching leftovers
blk-mq: don't special case flush inserts for blk-mq-sched
blk-mq-sched: don't add flushes to the head of requeue queue
blk-mq: have blk_mq_dispatch_rq_list() return if we queued IO or not
block: do not allow updates through sysfs until registration completes
lightnvm: set default lun range when no luns are specified
lightnvm: fix off-by-one error on target initialization
Maintainers: Modify SED list from nvme to block
Move stack parameters for sed_ioctl to prevent oversized stack with CONFIG_KASAN
uapi: sed-opal fix IOW for activate lsp to use correct struct
cdrom: Make device operations read-only
elevator: fix loading wrong elevator type for blk-mq devices
cciss: switch to pci_irq_alloc_vectors
block/loop: fix race between I/O and set_status
blk-mq-sched: don't hold queue_lock when calling exit_icq
block: set make_request_fn manually in blk_mq_update_nr_hw_queues
...
Mark Brown [Tue, 21 Feb 2017 17:29:01 +0000 (09:29 -0800)]
sched/core: Fix build paravirt build on arm and arm64
Commit
004172bdad64 ("sched/core: Remove unnecessary #include headers")
removed the inclusion of asm/paravirt.h which is used to get
declarations of paravirt_steal_rq_enabled and paravirt_steal_clock.
It is implicitly included on x86 but not on arm and arm64 breaking the
build if paravirtualization is used. Since things from that header are
used directly fix the build by putting the direct inclusion back.
Signed-off-by: Mark Brown <broonie@kernel.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Linus Torvalds [Tue, 21 Feb 2017 15:46:34 +0000 (07:46 -0800)]
Merge tag 'gfs2-4.11.fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2
Pull GFS2 updates from Robert Peterson:
"We've got eight GFS2 patches for this merge window:
- Andy Price submitted a patch to make gfs2_write_full_page a static
function.
- Dan Carpenter submitted a patch to fix a ERR_PTR thinko.
Three patches fix bugs related to deleting very large files, which
cause GFS2 to run out of journal space:
- The first one prevents GFS2 delete operation from requesting too
much journal space.
- The second one fixes a problem whereby GFS2 can hang because it
wasn't taking journal space demand into its calculations.
- The third one wakes up IO waiters when a flush is done to restart
processes stuck waiting for journal space to become available.
The final three patches are a performance improvement related to
spin_lock contention between multiple writers:
- The "tr_touched" variable was switched to a flag to be more atomic
and eliminate the possibility of some races.
- Function meta_lo_add was moved inline with its only caller to make
the code more readable and efficient.
- Contention on the gfs2_log_lock spinlock was greatly reduced by
avoiding the lock altogether in cases where we don't really need
it: buffers that already appear in the appropriate metadata list
for the journal. Many thanks to Steve Whitehouse for the ideas and
principles behind these patches"
* tag 'gfs2-4.11.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
gfs2: Make gfs2_write_full_page static
GFS2: Reduce contention on gfs2_log_lock
GFS2: Inline function meta_lo_add
GFS2: Switch tr_touched to flag in transaction
GFS2: Wake up io waiters whenever a flush is done
GFS2: Made logd daemon take into account log demand
GFS2: Limit number of transaction blocks requested for truncates
GFS2: Fix reference to ERR_PTR in gfs2_glock_iter_next
Linus Torvalds [Tue, 21 Feb 2017 15:44:03 +0000 (07:44 -0800)]
Merge branch 'for_linus' of git://git./linux/kernel/git/jack/linux-fs
Pull UDF fixes and cleanups from Jan Kara:
"Several small UDF fixes and cleanups and a small cleanup of fanotify
code"
* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jack/linux-fs:
fanotify: simplify the code of fanotify_merge
udf: simplify udf_ioctl()
udf: fix ioctl errors
udf: allow implicit blocksize specification during mount
udf: check partition reference in udf_read_inode()
udf: atomically read inode size
udf: merge module informations in super.c
udf: remove next_epos from udf_update_extent_cache()
udf: Factor out trimming of crtime
udf: remove empty condition
udf: remove unneeded line break
udf: merge bh free
udf: use pointer for kernel_long_ad argument
udf: use __packed instead of __attribute__ ((packed))
udf: Make stat on symlink report symlink length as st_size
fs/udf: make #ifdef UDF_PREALLOCATE unconditional
fs: udf: Replace CURRENT_TIME with current_time()
Linus Torvalds [Tue, 21 Feb 2017 02:38:47 +0000 (18:38 -0800)]
Merge branch 'for-next' of git://git.samba.org/sfrench/cifs-2.6
Pull CIFS/SMB3 updates from Steve French:
"Includes support for a critical SMB3 security feature: per-share
encryption from Pavel, and a cleanup from Jean Delvare.
Will have another cifs/smb3 merge next week"
* 'for-next' of git://git.samba.org/sfrench/cifs-2.6:
CIFS: Allow to switch on encryption with seal mount option
CIFS: Add capability to decrypt big read responses
CIFS: Decrypt and process small encrypted packets
CIFS: Add copy into pages callback for a read operation
CIFS: Add mid handle callback
CIFS: Add transform header handling callbacks
CIFS: Encrypt SMB3 requests before sending
CIFS: Enable encryption during session setup phase
CIFS: Add capability to transform requests before sending
CIFS: Separate RFC1001 length processing for SMB2 read
CIFS: Separate SMB2 sync header processing
CIFS: Send RFC1001 length in a separate iov
CIFS: Make send_cancel take rqst as argument
CIFS: Make SendReceive2() takes resp iov
CIFS: Separate SMB2 header structure
CIFS: Fix splice read for non-cached files
cifs: Add soft dependencies
cifs: Only select the required crypto modules
cifs: Simplify SMB2 and SMB311 dependencies
Linus Torvalds [Tue, 21 Feb 2017 02:24:39 +0000 (18:24 -0800)]
Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 updates from Ted Ts'o:
"For this cycle we add support for the shutdown ioctl, which is
primarily used for testing, but which can be useful on production
systems when a scratch volume is being destroyed and the data on it
doesn't need to be saved.
This found (and we fixed) a number of bugs with ext4's recovery to
corrupted file system --- the bugs increased the amount of data that
could be potentially lost, and in the case of the inline data feature,
could cause the kernel to BUG.
Also included are a number of other bug fixes, including in ext4's
fscrypt, DAX, inline data support"
* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (26 commits)
ext4: rename EXT4_IOC_GOINGDOWN to EXT4_IOC_SHUTDOWN
ext4: fix fencepost in s_first_meta_bg validation
ext4: don't BUG when truncating encrypted inodes on the orphan list
ext4: do not use stripe_width if it is not set
ext4: fix stripe-unaligned allocations
dax: assert that i_rwsem is held exclusive for writes
ext4: fix DAX write locking
ext4: add EXT4_IOC_GOINGDOWN ioctl
ext4: add shutdown bit and check for it
ext4: rename s_resize_flags to s_ext4_flags
ext4: return EROFS if device is r/o and journal replay is needed
ext4: preserve the needs_recovery flag when the journal is aborted
jbd2: don't leak modified metadata buffers on an aborted journal
ext4: fix inline data error paths
ext4: move halfmd4 into hash.c directly
ext4: fix use-after-iput when fscrypt contexts are inconsistent
jbd2: fix use after free in kjournald2()
ext4: fix data corruption in data=journal mode
ext4: trim allocation requests to group size
ext4: replace BUG_ON with WARN_ON in mb_find_extent()
...
Linus Torvalds [Tue, 21 Feb 2017 02:22:31 +0000 (18:22 -0800)]
Merge tag 'fscrypt-for-linus' of git://git./linux/kernel/git/tytso/fscrypt
Pull fscrypt updates from Ted Ts'o:
"Various cleanups for the file system encryption feature"
* tag 'fscrypt-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: constify struct fscrypt_operations
fscrypt: properly declare on-stack completion
fscrypt: split supp and notsupp declarations into their own headers
fscrypt: remove redundant assignment of res
fscrypt: make fscrypt_operations.key_prefix a string
fscrypt: remove unused 'mode' member of fscrypt_ctx
ext4: don't allow encrypted operations without keys
fscrypt: make test_dummy_encryption require a keyring key
fscrypt: factor out bio specific functions
fscrypt: pass up error codes from ->get_context()
fscrypt: remove user-triggerable warning messages
fscrypt: use EEXIST when file already uses different policy
fscrypt: use ENOTDIR when setting encryption policy on nondirectory
fscrypt: use ENOKEY when file cannot be created w/o key
Linus Torvalds [Tue, 21 Feb 2017 02:06:09 +0000 (18:06 -0800)]
Merge tag 'device-properties-4.11-rc1' of git://git./linux/kernel/git/rafael/linux-pm
Pull device property updates from Rafael J. Wysocki:
"Generic device properties framework updates for v4.11-rc1
Allow built-in (static) device properties to be declared as constant,
make it possible to save memory by discarding alternative (but unused)
built-in (static) property sets and add support for automatic handling
of built-in properties to the I2C code"
* tag 'device-properties-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
i2c: allow specify device properties in i2c_board_info
device property: export code duplicating array of property entries
device property: constify property arrays values
device property: allow to constify properties
Linus Torvalds [Tue, 21 Feb 2017 01:55:15 +0000 (17:55 -0800)]
Merge tag 'acpi-4.11-rc1' of git://git./linux/kernel/git/rafael/linux-pm
Pull ACPI updates from Rafael Wysocki:
"These update the ACPICA code in the kernel to upstream revision
20170119, which among other things updates copyright notices in all of
the ACPICA files, fix a couple of issues in the ACPI EC and button
drivers, fix modalias handling for non-discoverable devices with
DT-compatible identification strings, add a suspend quirk for one
platform and fix a message in the APEI code.
Specifics:
- Update of the ACPICA code in the kernel to upstream revision
20170119 including:
+ Fixes related to the handling of the bit width and bit offset
fields in Generic Address Structure (Lv Zheng)
+ ACPI resources handling fix related to invalid resource
descriptors (Bob Moore)
+ Fix to enable implicit result conversion for several ASL library
functions (Bob Moore)
+ Support for method invocations as target operands in AML (Bob
Moore)
+ Fix to use a correct operand type for DeRefOf() in some
situations (Bob Moore)
+ Utilities updates (Bob Moore, Lv Zheng)
+ Disassembler/debugger updates (David Box, Lv Zheng)
+ Build fixes (Colin Ian King, Lv Zheng)
+ Update of copyright notices in all files (Bob Moore)
- Fix for modalias handling for SPI and I2C devices with
DT-compatible identification strings (Dan O'Donovan)
- Fixes for the ACPI EC and button drivers (Lv Zheng)
- ACPI processor handling fix related to CPU hotplug (online/offline)
on x86 (Vitaly Kuznetsov)
- Suspend quirk to save/restore NVS memory over S3 transitions for
Lenovo G50-45 (Zhang Rui)
- Message formatting fix for the ACPI APEI code (Colin Ian King)"
* tag 'acpi-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (32 commits)
ACPICA: Update version to
20170119
ACPICA: Tools: Update common signon, remove compilation bit width
ACPICA: Source tree: Update copyright notices to 2017
ACPICA: Linuxize: Restore and fix Intel compiler build
x86/ACPI: keep x86_cpu_to_acpiid mapping valid on CPU hotplug
spi: acpi: Initialize modalias from of_compatible
i2c: acpi: Initialize info.type from of_compatible
ACPI / bus: Introduce acpi_of_modalias() equiv of of_modalias_node()
ACPI: save NVS memory for Lenovo G50-45
ACPI, APEI, EINJ: fix malformed newline escape
ACPI / button: Remove lid_init_state=method mode
ACPI / button: Change default behavior to lid_init_state=open
ACPI / EC: Use busy polling mode when GPE is not enabled
ACPI / EC: Remove old CLEAR_ON_RESUME quirk
ACPICA: Update version to
20161222
ACPICA: Parser: Update parse info table for some operators
ACPICA: Fix a problem with recent extra support for control method invocations
ACPICA: Parser: Allow method invocations as target operands
ACPICA: Fix for implicit result conversion for the ToXXX functions
ACPICA: Resources: Not a valid resource if buffer length too long
..
Linus Torvalds [Tue, 21 Feb 2017 01:41:31 +0000 (17:41 -0800)]
Merge tag 'pm-4.11-rc1' of git://git./linux/kernel/git/rafael/linux-pm
Pull power management updates from Rafael Wysocki:
"The majority of changes go into the Operating Performance Points (OPP)
framework and cpufreq this time, followed by devfreq and some
scattered updates all over.
The OPP changes are mostly related to switching over from RCU-based
synchronization, that turned out to be overly complicated and
problematic, to reference counting using krefs.
In the cpufreq land there are core cleanups, documentation updates, a
new driver for Broadcom BMIPS SoCs, a new cpufreq-dt sub-driver for TI
SoCs that require special handling, ARM64 SoCs support for the qoriq
driver, intel_pstate updates, powernv driver update and assorted
fixes.
The devfreq changes are mostly fixes related to the sysfs interface
and some Exynos drivers updates.
Apart from that, the cpuidle menu governor will support per-CPU PM QoS
constraints for the wakeup latency now, some bugs in the wakeup IRQs
framework are fixed, the generic power domains framework should handle
asynchronous invocations of *noirq suspend/resume callbacks from now
on, the analyze_suspend.py script is updated and there is a new tool
for intel_pstate diagnostics.
Specifics:
- Operating Performance Points (OPP) framework fixes, cleanups and
switch over from RCU-based synchronization to reference counting
using krefs (Viresh Kumar, Wei Yongjun, Dave Gerlach)
- cpufreq core cleanups and documentation updates (Viresh Kumar,
Rafael Wysocki)
- New cpufreq driver for Broadcom BMIPS SoCs (Markus Mayer)
- New cpufreq-dt sub-driver for TI SoCs requiring special handling,
like in the AM335x, AM437x, DRA7x, and AM57x families, along with
new DT bindings for it (Dave Gerlach, Paul Gortmaker)
- ARM64 SoCs support for the qoriq cpufreq driver (Tang Yuantian)
- intel_pstate driver updates including a new sysfs knob to control
the driver's operation mode and fixes related to the no_turbo sysfs
knob and the hardware-managed P-states feature support (Rafael
Wysocki, Srinivas Pandruvada)
- New interface to export ultra-turbo frequencies for the powernv
cpufreq driver (Shilpasri Bhat)
- Assorted fixes for cpufreq drivers (Arnd Bergmann, Dan Carpenter,
Wei Yongjun)
- devfreq core fixes, mostly related to the sysfs interface exported
by it (Chanwoo Choi, Chris Diamand)
- Updates of the exynos-bus and exynos-ppmu devfreq drivers (Chanwoo
Choi)
- Device PM QoS extension to support CPUs and support for per-CPU
wakeup (device resume) latency constraints in the cpuidle menu
governor (Alex Shi)
- Wakeup IRQs framework fixes (Grygorii Strashko)
- Generic power domains framework update including a fix to make it
handle asynchronous invocations of *noirq suspend/resume callbacks
correctly (Ulf Hansson, Geert Uytterhoeven)
- Assorted fixes and cleanups in the core suspend/hibernate code, PM
QoS framework and x86 ACPI idle support code (Corentin Labbe, Geert
Uytterhoeven, Geliang Tang, John Keeping, Nick Desaulniers)
- Update of the analyze_suspend.py script is updated to version 4.5
offering multiple improvements (Todd Brandt)
- New tool for intel_pstate diagnostics using the pstate_sample
tracepoint (Doug Smythies)"
* tag 'pm-4.11-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm: (85 commits)
MAINTAINERS: cpufreq: add bmips-cpufreq.c
PM / QoS: Fix memory leak on resume_latency.notifiers
PM / Documentation: Spelling s/wrtie/write/
PM / sleep: Fix test_suspend after sleep state rework
cpufreq: CPPC: add ACPI_PROCESSOR dependency
cpufreq: make ti-cpufreq explicitly non-modular
cpufreq: Do not clear real_cpus mask on policy init
tools/power/x86: Debug utility for intel_pstate driver
AnalyzeSuspend: fix drag and zoom bug in javascript
PM / wakeirq: report a wakeup_event on dedicated wekup irq
PM / wakeirq: Fix spurious wake-up events for dedicated wakeirqs
PM / wakeirq: Enable dedicated wakeirq for suspend
cpufreq: dt: Don't use generic platdev driver for ti-cpufreq platforms
cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime
Documentation: dt: add bindings for ti-cpufreq
PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API
cpufreq: qoriq: Don't look at clock implementation details
cpufreq: qoriq: add ARM64 SoCs support
PM / Domains: Provide dummy governors if CONFIG_PM_GENERIC_DOMAINS=n
cpufreq: brcmstb-avs-cpufreq: remove unnecessary platform_set_drvdata()
...
Linus Torvalds [Tue, 21 Feb 2017 01:31:23 +0000 (17:31 -0800)]
Merge tag 'leds_for_4.11' of git://git./linux/kernel/git/j.anaszewski/linux-leds
Pull LED updates from Jacek Anaszewski:
"New features and improvements:
- add new optional brightness_hw_changed attribute for the LEDs that
may have their brightness level changed autonomously (outside of
kernel control) by hardware / firmware. The attribute supports
userspace notifications through POLLPRI events
- add led_brightness_hw_mon tool that demonstrates how to use the
aforementioned feature
- add LED_ON enum for LEDs that can be only turned on/off, and don't
allow setting other brightness levels
- allow for adjusting heartbeat trigger blink brightness level
Fixes and cleanups:
- avoid harmless maybe-uninitialized warning in leds-ktd2692.c
- add context to the existing example entries in common LED bindings
to make the documentation more clear"
* tag 'leds_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/j.anaszewski/linux-leds:
leds: ledtrig-heartbeat: Make top brightness adjustable
tools/leds: Add led_hw_brightness_mon program
leds: class: Add new optional brightness_hw_changed attribute
leds: ktd2692: avoid harmless maybe-uninitialized warning
leds: add LED_ON brightness as boolean value
DT: leds: Improve examples by adding some context
Linus Torvalds [Tue, 21 Feb 2017 01:26:11 +0000 (17:26 -0800)]
Merge tag 'spi-v4.11' of git://git./linux/kernel/git/broonie/spi
Pull spi updates from Mark Brown:
"This release is mainly a collection of driver specific updates,
including a few nice cleanups to make drivers use more core features.
- automatically use the parent device to allocate DMA buffers if
there wasn't an explicitly configured device.
- fixes for leaks on allocation.
- a small piece of the start of SPI slave support, a feature that's
been on the cards for over a decade!"
* tag 'spi-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/spi: (55 commits)
spi: spi-ti-qspi: Fix error handling
spi: spi-ti-qspi: Fix error handling
spi: lantiq-ssc: activate under COMPILE_TEST
spi: armada-3700: Remove spi_master_put in a3700_spi_remove()
spi: ti-qspi: revise ti_qspi_probe() failure flow
spi: spi-ep93xx: simplify GPIO chip selects
spi: rspi: Replaces "n" by "len" in qspi_transfer_*()
spi: rspi: Fixes bogus received byte in qspi_transfer_in()
spi: bcm-qspi: Remove unnecessary platform_set_drvdata()
spi: bcm-qspi: Fix bcm_qspi_bspi_read() performance
spi: lantiq-ssc: add support for Lantiq SSC SPI controller
spi: s3c64xx: fix inconsistency between binding and driver
spi: armada-3700: Remove .owner field for driver
spi: bcm-qspi: Added mspi read fallback in bcm_qspi_flash_read()
spi: fix device-node leaks
spi: mediatek: Only do dma for 4-byte aligned buffers
spi: When no dma_chan map buffers with spi_master's parent
spi: pca2xx-pci: Allow MSI
spi: pxa2xx: Prepare for edge-triggered interrupts
spi: pxa2xx: Add support for Intel Gemini Lake
...
Linus Torvalds [Tue, 21 Feb 2017 01:23:57 +0000 (17:23 -0800)]
Merge tag 'regulator-v4.11' of git://git./linux/kernel/git/broonie/regulator
Pull regulator updates from Mark Brown:
"Quite a lot of work going on the core this release, mainly around
system initialization, but a quiet release for drivers:
- fixes for registration of multiple regulators on a PMIC from Javier
Martinez Canillas and Jon Hunter.
- cleanups to the regulator_get() code from Dmitry Torokhov
- lots of constifcation of structs from Bhumika Goyal
- support for Motorola CPCAP regulators from Tony Lindgren"
* tag 'regulator-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator: (52 commits)
regulator: core: Resolve supplies before disabling unused regulators
regulator: Fix regulator_summary for deviceless consumers
regulator: tps65086: Fix DT node referencing in of_parse_cb
regulator: tps65086: Fix expected switch DT node names
regulator: core: simplify _regulator_get()
regulator: core: have regulator_dev_lookup() return ERR_PTR-encoded errors
regulator: gpio: correct default type
regulator: cpcap: Add basic regulator support
regulator: core: fix typo in regulator_bulk_disable()
regulator: core: optimize devm_regulator_bulk_get()
regulator: core: simplify regulator_bulk_force_disable()
regulator: core: have _regulator_get() accept get_type argument
regulator: core: remove dead code in _regulator_get()
regulator: rn5t618: constify regulator_ops structure
regulator: rc5t583-regulator: constify regulator_ops structure
regulator: pv88090-regulator: constify regulator_ops structure
regulator: pv88080-regulator: constify regulator_ops structure
regulator: pv88060-regulator: constify regulator_ops structure
regulator: pfuze100-regulator: constify regulator_ops structure
regulator: pcf50633-regulator: constify regulator_ops structure
...
Linus Torvalds [Tue, 21 Feb 2017 01:20:34 +0000 (17:20 -0800)]
Merge tag 'regmap-v4.11' of git://git./linux/kernel/git/broonie/regmap
Pull regmap updates from Mark Brown:
"For v4.11 activity on the regmap API has literally doubled, there are
two patches this release:
- fixes from Charles Keepax to make the kerneldoc generate correctly
- a cleanup from Geliang Tang using rb_entry() rather than open
coding it with container_of()"
* tag 'regmap-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regmap:
regmap: Fixup the kernel-doc comments on functions/structures
regmap: use rb_entry()
Linus Torvalds [Tue, 21 Feb 2017 01:16:43 +0000 (17:16 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/hid
Pull HID updates from Jiri Kosina:
- a lot of Wacom driver updates; most notably second generation Intuos
Pro is now supported, code from Aaron Armstrong Skomra and Jason
Gerecke
- Surface 3 and 4 Type Cover Pro support from Daniel Keller, Dennis
Chen and Yuta Kobayashi
- hid-rmi is now generic transport driver, used by synaptics-rmi4;
Support the Lenovo Thinkpad X1 Tablet dock follows on top, from
Andrew Duggan
- a few misc bugfixes and improvements here and there
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/hid: (29 commits)
HID: intel-ish-hid: constify device_type structure
HID: wacom: Bluetooth IRQ for Intuos Pro should handle prox/range
HID: intel-ish-hid: ipc: check FW status to distinguish ISH resume paths
HID: multitouch: fix LG Melfas touchscreen
HID: wacom: don't apply generic settings to old devices
HID: wacom: generic: support LEDs
HID: wacom: generic: support generic touch switch
HID: wacom: generic: add vendor defined touch
HID: wacom: generic: add support for touchring
HID: wacom: generic: remove input_event_flag
HID: wacom: Support 2nd-gen Intuos Pro's Bluetooth classic interface
HID: wacom: Move WAC_CMD_* into wacom_wac.h
HID: wacom: Enable HID_GENERIC codepath for Bluetooth devices
HID: wacom: do not attempt to switch mode while in probe
HID: wacom: remove warning while disconnecting devices
HID: wacom: release the resources before leaving despite devm
HID: whitespace cleanup
HID: multitouch: enable Surface 3 Type Cover Pro to report multitouch data
HID: rmi: Support the Lenovo Thinkpad X1 Tablet dock using hid-rmi
HID: rmi: Handle all Synaptics touchpads using hid-rmi
...
Linus Torvalds [Tue, 21 Feb 2017 01:13:23 +0000 (17:13 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/jikos/livepatching
Pull livepatching updates from Jiri Kosina:
- removal of dead code (Kamalesh Babulal)
- documentation update (Miroslav Benes)
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jikos/livepatching:
livepatch: doc: remove the limitation for schedule() patching
powerpc/livepatch: Remove klp_write_module_reloc() stub
Linus Torvalds [Tue, 21 Feb 2017 00:42:43 +0000 (16:42 -0800)]
Merge tag 'iommu-updates-v4.11' of git://git./linux/kernel/git/joro/iommu
Pull IOMMU UPDATES from Joerg Roedel:
- KVM PCIe/MSI passthrough support on ARM/ARM64
- introduction of a core representation for individual hardware iommus
- support for IOMMU privileged mappings as supported by some ARM IOMMUS
- 16-bit SID support for ARM-SMMUv2
- stream table optimization for ARM-SMMUv3
- various fixes and other small improvements
* tag 'iommu-updates-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/joro/iommu: (61 commits)
vfio/type1: Fix error return code in vfio_iommu_type1_attach_group()
iommu: Remove iommu_register_instance interface
iommu/exynos: Make use of iommu_device_register interface
iommu/mediatek: Make use of iommu_device_register interface
iommu/msm: Make use of iommu_device_register interface
iommu/arm-smmu: Make use of the iommu_register interface
iommu: Add iommu_device_set_fwnode() interface
iommu: Make iommu_device_link/unlink take a struct iommu_device
iommu: Add sysfs bindings for struct iommu_device
iommu: Introduce new 'struct iommu_device'
iommu: Rename struct iommu_device
iommu: Rename iommu_get_instance()
iommu: Fix static checker warning in iommu_insert_device_resv_regions
iommu: Avoid unnecessary assignment of dev->iommu_fwspec
iommu/mediatek: Remove bogus 'select' statements
iommu/dma: Remove bogus dma_supported() implementation
iommu/ipmmu-vmsa: Restrict IOMMU Domain Geometry to 32-bit address space
iommu/vt-d: Don't over-free page table directories
iommu/vt-d: Tylersburg isoch identity map check is done too late.
iommu/vt-d: Fix some macros that are incorrectly specified in intel-iommu
...
Linus Torvalds [Tue, 21 Feb 2017 00:39:47 +0000 (16:39 -0800)]
Merge tag 'm68k-for-v4.11-tag1' of git://git./linux/kernel/git/geert/linux-m68k
Pull m68k updates from Geert Uytterhoeven:
- kernel message modernizations and cleanups
- defconfig updates
- cleanups
* tag 'm68k-for-v4.11-tag1' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k:
m68k/sun3: Remove dead code in paging_init()
m68k/include: Modernize printing of kernel messages
m68k/mm: Modernize printing of kernel messages
m68k/mm: sun3 - Modernize printing of kernel messages
m68k/kernel: Modernize printing of kernel messages
m68k/sun3x: Modernize printing of kernel messages
m68k/sun3: Modernize printing of kernel messages
m68k/q40: Modernize printing of kernel messages
m68k/mvme16x: Modernize printing of kernel messages
m68k/mvme147: Modernize printing of kernel messages
m68k/bvme6000: Modernize printing of kernel messages
m68k/68000: Modernize printing of kernel messages
m68k/atari: Modernize printing of kernel messages
m68k: Delete an unnecessary variable assignment in sys_cacheflush()
m68k/mac: Clean up interrupt debug macros and printk statements
m68k/mac: Remove SHUTUP_SONIC interrupt hack
m68k/mac: Improve NMI handler
m68k/defconfig: Update defconfigs for v4.10-rc1
m68k/mac: Remove unneeded linux/miscdevice.h include
Linus Torvalds [Tue, 21 Feb 2017 00:26:57 +0000 (16:26 -0800)]
Merge branch 'x86-platform-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 platform updates from Ingo Molnar:
"Misc platform updates: SGI UV4 support additions, intel-mid Merrifield
enhancements and purge of old code"
* 'x86-platform-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (21 commits)
x86/platform/UV/NMI: Fix uneccessary kABI breakage
x86/platform/UV: Clean up the NMI code to match current coding style
x86/platform/UV: Ensure uv_system_init is called when necessary
x86/platform/UV: Initialize PCH GPP_D_0 NMI Pin to be NMI source
x86/platform/UV: Verify NMI action is valid, default is standard
x86/platform/UV: Add basic CPU NMI health check
x86/platform/UV: Add Support for UV4 Hubless NMIs
x86/platform/UV: Add Support for UV4 Hubless systems
x86/platform/UV: Clean up the UV APIC code
x86/platform/intel-mid: Move watchdog registration to arch_initcall()
x86/platform/intel-mid: Don't shadow error code of mp_map_gsi_to_irq()
x86/platform/intel-mid: Allocate RTC interrupt for Merrifield
x86/ioapic: Return suitable error code in mp_map_gsi_to_irq()
x86/platform/UV: Fix 2 socket config problem
x86/platform/UV: Fix panic with missing UVsystab support
x86/platform/intel-mid: Enable RTC on Intel Merrifield
x86/platform/intel: Remove PMIC GPIO block support
x86/platform/intel-mid: Make intel_scu_device_register() static
x86/platform/intel-mid: Enable GPIO keys on Merrifield
x86/platform/intel-mid: Get rid of duplication of IPC handler
...
Linus Torvalds [Mon, 20 Feb 2017 23:57:19 +0000 (15:57 -0800)]
Merge branch 'x86-mm-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 mm updates from Ingo Molnar:
"A laundry list of changes: KASAN improvements/fixes for ptdump, a
self-test fix, PAT cleanup and wbinvd() avoidance, removal of stale
code and documentation updates"
* 'x86-mm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/mm/ptdump: Add address marker for KASAN shadow region
x86/mm/ptdump: Optimize check for W+X mappings for CONFIG_KASAN=y
x86/mm/pat: Use rb_entry()
x86/mpx: Re-add MPX to selftests Makefile
x86/mm: Remove CONFIG_DEBUG_NX_TEST
x86/mm/cpa: Avoid wbinvd() for PREEMPT
x86/mm: Improve documentation for low-level device I/O functions
Linus Torvalds [Mon, 20 Feb 2017 23:30:51 +0000 (15:30 -0800)]
Merge branch 'x86-microcode-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 microcode updates from Ingo Molnar:
"The main changes are further simplification and unification of the
code between the AMD and Intel microcode loaders, plus other
simplifications - by Borislav Petkov"
* 'x86-microcode-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/microcode/AMD: Remove struct cont_desc.eq_id
x86/microcode/AMD: Remove AP scanning optimization
x86/microcode/AMD: Simplify saving from initrd
x86/microcode/AMD: Unify load_ucode_amd_ap()
x86/microcode/AMD: Check patch level only on the BSP
x86/microcode: Remove local vendor variable
x86/microcode/AMD: Use find_microcode_in_initrd()
x86/microcode/AMD: Get rid of global this_equiv_id
x86/microcode: Decrease CPUID use
x86/microcode/AMD: Rework container parsing
x86/microcode/AMD: Extend the container struct
x86/microcode/AMD: Shorten function parameter's name
x86/microcode/AMD: Clean up find_equiv_id()
x86/microcode: Convert to bare minimum MSR accessors
x86/MSR: Carve out bare minimum accessors
Linus Torvalds [Mon, 20 Feb 2017 23:03:51 +0000 (15:03 -0800)]
Merge branch 'x86-fpu-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 fpu updates from Ingo Molnar:
"The main changes relate to fixes between (lack of) CPUID and FPU
detection that should only affect old or weird CPUs, by Andy
Lutomirski"
* 'x86-fpu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/fpu: Fix the "Giving up, no FPU found" test
x86/fpu: Fix CPUID-less FPU detection
x86/fpu: Fix "x86/fpu: Legacy x87 FPU detected" message
x86/cpu: Re-apply forced caps every time CPU caps are re-read
x86/cpu: Factor out application of forced CPU caps
x86/cpu: Add X86_FEATURE_CPUID
x86/fpu/xstate: Move XSAVES state init to a function
Linus Torvalds [Mon, 20 Feb 2017 22:37:08 +0000 (14:37 -0800)]
Merge branch 'x86-cpufeature-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 cpufeature updates from Ingo Molnar:
"The main changes in this cycle were related to enable ring-3
MONITOR/MWAIT instructions support on supported CPUs, by Grzegorz
Andrejczuk and Piotr Luc"
* 'x86-cpufeature-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/cpufeature: Move RING3MWAIT feature to avoid conflicts
x86/cpufeature: Enable RING3MWAIT for Knights Mill
x86/cpufeature: Enable RING3MWAIT for Knights Landing
x86/cpufeature: Add RING3MWAIT to CPU features
x86/elf: Add HWCAP2 to expose ring 3 MONITOR/MWAIT
x86/msr: Add MSR_MISC_FEATURE_ENABLES and RING3MWAIT bit
x86/cpufeature: Add AVX512_VPOPCNTDQ feature
Linus Torvalds [Mon, 20 Feb 2017 22:34:23 +0000 (14:34 -0800)]
Merge branch 'x86-cleanups-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 cleanups from Ingo Molnar:
"Two small cleanups"
* 'x86-cleanups-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/traps: Get rid of unnecessary preempt_disable/preempt_enable_no_resched
x86/pci-calgary: Fix iommu_free() comparison of unsigned expression >= 0
Linus Torvalds [Mon, 20 Feb 2017 22:04:37 +0000 (14:04 -0800)]
Merge branch 'x86-boot-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 boot updates from Ingo Molnar:
"Misc updates:
- fix e820 error handling
- convert page table setup code from assembly to C
- fix kexec environment bug
- ... plus small cleanups"
* 'x86-boot-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/kconfig: Remove misleading note regarding hibernation and KASLR
x86/boot: Fix KASLR and memmap= collision
x86/e820/32: Fix e820_search_gap() error handling on x86-32
x86/boot/32: Convert the 32-bit pgtable setup code from assembly to C
x86/e820: Make e820_search_gap() static and remove unused variables
Linus Torvalds [Mon, 20 Feb 2017 22:03:03 +0000 (14:03 -0800)]
Merge branch 'x86-asm-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 asm update from Ingo Molnar:
"This adds a new SYSRET testcase"
* 'x86-asm-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
selftests/x86: Add a selftest for SYSRET to noncanonical addresses
Linus Torvalds [Mon, 20 Feb 2017 22:01:21 +0000 (14:01 -0800)]
Merge branch 'x86-apic-for-linus' of git://git./linux/kernel/git/tip/tip
Pull x86 apic changes from Ingo Molnar:
"The main changes in this cycle were:
- Re-activate the hw IRQ resend mechanism that was downgraded to a
sw-resend unintentionally. (Ruslan Ruslichenko)
- Avoid sporadic spurious hrtimer interrupts (Frederic Weisbecker)"
[ Let's see if the io_apic retrigger ends up surviving this release, it
got reverted last time because it found problems elsewhere - Linus ]
* 'x86-apic-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/apic: Fix a typo in a comment line
x86/ioapic: Restore IO-APIC irq_chip retrigger callback
x86/apic: Implement set_state_oneshot_stopped() callback
x86/apic: Fix typos in comments
Linus Torvalds [Mon, 20 Feb 2017 21:23:30 +0000 (13:23 -0800)]
Merge branch 'locking-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull locking updates from Ingo Molnar:
"The main changes in this cycle were:
- Implement wraparound-safe refcount_t and kref_t types based on
generic atomic primitives (Peter Zijlstra)
- Improve and fix the ww_mutex code (Nicolai Hähnle)
- Add self-tests to the ww_mutex code (Chris Wilson)
- Optimize percpu-rwsems with the 'rcuwait' mechanism (Davidlohr
Bueso)
- Micro-optimize the current-task logic all around the core kernel
(Davidlohr Bueso)
- Tidy up after recent optimizations: remove stale code and APIs,
clean up the code (Waiman Long)
- ... plus misc fixes, updates and cleanups"
* 'locking-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (50 commits)
fork: Fix task_struct alignment
locking/spinlock/debug: Remove spinlock lockup detection code
lockdep: Fix incorrect condition to print bug msgs for MAX_LOCKDEP_CHAIN_HLOCKS
lkdtm: Convert to refcount_t testing
kref: Implement 'struct kref' using refcount_t
refcount_t: Introduce a special purpose refcount type
sched/wake_q: Clarify queue reinit comment
sched/wait, rcuwait: Fix typo in comment
locking/mutex: Fix lockdep_assert_held() fail
locking/rtmutex: Flip unlikely() branch to likely() in __rt_mutex_slowlock()
locking/rwsem: Reinit wake_q after use
locking/rwsem: Remove unnecessary atomic_long_t casts
jump_labels: Move header guard #endif down where it belongs
locking/atomic, kref: Implement kref_put_lock()
locking/ww_mutex: Turn off __must_check for now
locking/atomic, kref: Avoid more abuse
locking/atomic, kref: Use kref_get_unless_zero() more
locking/atomic, kref: Kill kref_sub()
locking/atomic, kref: Add kref_read()
locking/atomic, kref: Add KREF_INIT()
...
Linus Torvalds [Mon, 20 Feb 2017 20:52:55 +0000 (12:52 -0800)]
Merge branch 'sched-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull scheduler updates from Ingo Molnar:
"The main changes in this (fairly busy) cycle were:
- There was a class of scheduler bugs related to forgetting to update
the rq-clock timestamp which can cause weird and hard to debug
problems, so there's a new debug facility for this: which uncovered
a whole lot of bugs which convinced us that we want to keep the
debug facility.
(Peter Zijlstra, Matt Fleming)
- Various cputime related updates: eliminate cputime and use u64
nanoseconds directly, simplify and improve the arch interfaces,
implement delayed accounting more widely, etc. - (Frederic
Weisbecker)
- Move code around for better structure plus cleanups (Ingo Molnar)
- Move IO schedule accounting deeper into the scheduler plus related
changes to improve the situation (Tejun Heo)
- ... plus a round of sched/rt and sched/deadline fixes, plus other
fixes, updats and cleanups"
* 'sched-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (85 commits)
sched/core: Remove unlikely() annotation from sched_move_task()
sched/autogroup: Rename auto_group.[ch] to autogroup.[ch]
sched/topology: Split out scheduler topology code from core.c into topology.c
sched/core: Remove unnecessary #include headers
sched/rq_clock: Consolidate the ordering of the rq_clock methods
delayacct: Include <uapi/linux/taskstats.h>
sched/core: Clean up comments
sched/rt: Show the 'sched_rr_timeslice' SCHED_RR timeslice tuning knob in milliseconds
sched/clock: Add dummy clear_sched_clock_stable() stub function
sched/cputime: Remove generic asm headers
sched/cputime: Remove unused nsec_to_cputime()
s390, sched/cputime: Remove unused cputime definitions
powerpc, sched/cputime: Remove unused cputime definitions
s390, sched/cputime: Make arch_cpu_idle_time() to return nsecs
ia64, sched/cputime: Remove unused cputime definitions
ia64: Convert vtime to use nsec units directly
ia64, sched/cputime: Move the nsecs based cputime headers to the last arch using it
sched/cputime: Remove jiffies based cputime
sched/cputime, vtime: Return nsecs instead of cputime_t to account
sched/cputime: Complete nsec conversion of tick based accounting
...
Linus Torvalds [Mon, 20 Feb 2017 20:47:44 +0000 (12:47 -0800)]
Merge branch 'ras-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RAS updates from Ingo Molnar:
"The main changes in this cycle were:
- Assign notifier chain priorities for all RAS related handlers to
make the ordering explicit (Borislav Petkov)
- Improve the AMD MCA banks sysfs output (Yazen Ghannam)
- Various cleanups and restructuring of the x86 RAS code (Borislav
Petkov)"
* 'ras-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
x86/ras, EDAC, acpi: Assign MCE notifier handlers a priority
x86/ras: Get rid of mce_process_work()
EDAC/mce/amd: Dump TSC value
EDAC/mce/amd: Unexport amd_decode_mce()
x86/ras/amd/inj: Change dependency
x86/ras: Flip the TSC-adding logic
x86/ras/amd: Make sysfs names of banks more user-friendly
x86/ras/therm_throt: Do not log a fake MCE for thermal events
x86/ras/inject: Make it depend on X86_LOCAL_APIC=y
Theodore Ts'o [Mon, 20 Feb 2017 20:34:59 +0000 (15:34 -0500)]
ext4: rename EXT4_IOC_GOINGDOWN to EXT4_IOC_SHUTDOWN
It's very likely the file system independent ioctl name will be
FS_IOC_SHUTDOWN, so let's use the same name for the ext4 ioctl name.
Signed-off-by: Theodore Ts'o <tytso@mit.edu>
Linus Torvalds [Mon, 20 Feb 2017 20:21:13 +0000 (12:21 -0800)]
Merge branch 'perf-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull perf updates from Ingo Molnar:
"On the kernel side the main changes in this cycle were:
- Add Intel Kaby Lake CPU support (Srinivas Pandruvada)
- AMD uncore driver updates for fam17 (Janakarajan Natarajan)
- Intel/PT updates and core events optimizations and cleanups
(Alexander Shishkin)
- cgroups events fixes (David Carrillo-Cisneros)
- kprobes improvements (Masami Hiramatsu)
- ... plus misc fixes and updates.
On the tooling side the main changes were:
- Support clang build in tools/{perf,lib/{bpf,traceevent,api}} with
CC=clang, to, for instance, take advantage of better warnings
(Arnaldo Carvalho de Melo):
- Introduce the 'delta-abs' 'perf diff' compute method, that orders
the histogram entries by the absolute value of the percentage delta
for a function in two perf.data files, i.e. the functions that
changed the most (increase or decrease in samples) comes first
(Namhyung Kim)
- Add support for parsing Intel uncore vendor event files and add
uncore vendor events for the Intel server processors (Haswell,
Broadwell, IvyBridge), Xeon Phi (Knights Landing) and Broadwell DE
(Andi Kleen)
- Introduce 'perf ftrace' a perf front end to the kernel's ftrace
function and function_graph tracer, defaulting to the
"function_graph" tracer, more work will be done in reviving this
effort, forward porting it from its initial patch submission
(Namhyung Kim)
- Add 'e' and 'c' hotkeys to expand/collapse call chains for a single
hist entry in the 'perf report' and 'perf top' TUI (Jiri Olsa)
- Account thread wait time (off CPU time) separately: sleep, iowait
and preempt, based on the prev_state of the last event, show the
breakdown when using "perf sched timehist --state" (Namhyumg Kim)
- Add more triggers to switch the output file (perf.data.TIMESTAMP).
Now, in addition to switching to a different output file when
receiving a SIGUSR2, one can also specify file size and time based
triggers:
perf record -a --switch-output=signal
is equivalent to what we had before:
perf record -a --switch-output
While we can also ask for the file to be "sliced" by size, taking
into account that that will happen only when we get woken up by the
kernel, i.e. one has to take into account the --mmap-pages (the
size of the perf mmap ring buffer):
perf record -a --switch-output=2G
will break the perf.data output into multiple files limited to 2GB
of samples, right when generating the output.
For time based samples, alert() will be used, so to have 1 minute
limited perf.data output files:
perf record -a --switch-output=1m
(Jiri Olsa)
- Improve 'perf trace' (Arnaldo Carvalho de Melo)
- 'perf kallsyms' toy tool to look for extended symbol information on
the running kernel and demonstrate the machine/thread/symbol APIs
for use in other tools, such as 'perf probe' (Arnaldo Carvalho de
Melo)
- ... plus tons of other changes, see the shortlog and Git log for
details"
* 'perf-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (131 commits)
perf tools: Add missing parse_events_error() prototype
perf pmu: Fix check for unset alias->unit array
perf tools: Be consistent on the type of map->symbols[] interator
perf intel pt decoder: clang has no -Wno-override-init
perf evsel: Do not put a variable sized type not at the end of a struct
perf probe: Avoid accessing uninitialized 'map' variable
perf tools: Do not put a variable sized type not at the end of a struct
perf record: Do not put a variable sized type not at the end of a struct
perf tests: Synthesize struct instead of using field after variable sized type
perf bench numa: Make sure dprintf() is not defined
Revert "perf bench futex: Sanitize numeric parameters"
tools lib subcmd: Make it an error to pass a signed value to OPTION_UINTEGER
tools: Set the maximum optimization level according to the compiler being used
tools: Suppress request for warning options not existent in clang
samples/bpf: Reset global variables
samples/bpf: Ignore already processed ELF sections
samples/bpf: Add missing header
perf symbols: dso->name is an array, no need to check it against NULL
perf tests record: No need to test an array against NULL
perf symbols: No need to check if sym->name is NULL
...
Linus Torvalds [Mon, 20 Feb 2017 19:47:11 +0000 (11:47 -0800)]
Merge branch 'efi-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull EFI updates from Ingo Molnar:
"The main changes in this cycle were:
- Changes to the EFI init code to establish whether secure boot
authentication was performed at boot time. (Josh Boyer, David
Howells)
- Wire up the UEFI memory attributes table for x86. This eliminates
any runtime memory regions that are both writable and executable,
on recent firmware versions. (Sai Praneeth)
- Move the BGRT init code to an earlier stage so that we can still
use efi_mem_reserve(). (Dave Young)
- Preserve debug symbols in the ARM/arm64 UEFI stub (Ard Biesheuvel)
- Code deduplication work and various other cleanups (Lukas Wunner)
- ... plus various other fixes and cleanups"
* 'efi-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
efi/libstub: Make file I/O chunking x86-specific
efi: Print the secure boot status in x86 setup_arch()
efi: Disable secure boot if shim is in insecure mode
efi: Get and store the secure boot status
efi: Add SHIM and image security database GUID definitions
arm/efi: Allow invocation of arbitrary runtime services
x86/efi: Allow invocation of arbitrary runtime services
efi/libstub: Preserve .debug sections after absolute relocation check
efi/x86: Add debug code to print cooked memmap
efi/x86: Move the EFI BGRT init code to early init code
efi: Use typed function pointers for the runtime services table
efi/esrt: Fix typo in pr_err() message
x86/efi: Add support for EFI_MEMORY_ATTRIBUTES_TABLE
efi: Introduce the EFI_MEM_ATTR bit and set it from the memory attributes table
efi: Make EFI_MEMORY_ATTRIBUTES_TABLE initialization common across all architectures
x86/efi: Deduplicate efi_char16_printk()
efi: Deduplicate efi_file_size() / _read() / _close()
Linus Torvalds [Mon, 20 Feb 2017 19:21:17 +0000 (11:21 -0800)]
Merge branch 'core-rcu-for-linus' of git://git./linux/kernel/git/tip/tip
Pull RCU updates from Ingo Molnar:
"The RCU changes in this cycle are:
- Dynticks updates, consolidating open-coded counter accesses into a
well-defined API
- SRCU updates: Simplify algorithm, add formal verification
- Documentation updates
- Miscellaneous fixes
- Torture-test updates
Most of the diffstat comes from the relatively large documentation
update"
* 'core-rcu-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (42 commits)
srcu: Reduce probability of SRCU ->unlock_count[] counter overflow
rcutorture: Add CBMC-based formal verification for SRCU
srcu: Force full grace-period ordering
srcu: Implement more-efficient reader counts
rcu: Adjust FQS offline checks for exact online-CPU detection
rcu: Check cond_resched_rcu_qs() state less often to reduce GP overhead
rcu: Abstract extended quiescent state determination
rcu: Abstract dynticks extended quiescent state enter/exit operations
rcu: Add lockdep checks to synchronous expedited primitives
rcu: Eliminate unused expedited_normal counter
llist: Clarify comments about when locking is needed
rcu: Fix comment in rcu_organize_nocb_kthreads()
rcu: Enable RCU tracepoints by default to aid in debugging
rcu: Make rcu_cpu_starting() use its "cpu" argument
rcu: Add comment headers to expedited-grace-period counter functions
rcu: Don't wake rcuc/X kthreads on NOCB CPUs
rcu: Re-enable TASKS_RCU for User Mode Linux
rcu: Once again use NMI-based stack traces in stall warnings
rcu: Remove short-term CPU kicking
rcu: Add long-term CPU kicking
...
Linus Torvalds [Mon, 20 Feb 2017 19:19:09 +0000 (11:19 -0800)]
Merge branch 'core-debugobjects-for-linus' of git://git./linux/kernel/git/tip/tip
Pull debugobjects updates from Ingo Molnar:
"A number of scalability improvements by Waimang Long"
* 'core-debugobjects-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
debugobjects: Improve variable naming
debugobjects: Reduce contention on the global pool_lock
debugobjects: Scale thresholds with # of CPUs
debugobjects: Track number of kmem_cache_alloc/kmem_cache_free done
Linus Torvalds [Mon, 20 Feb 2017 18:52:23 +0000 (10:52 -0800)]
Merge branch 'irq-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull irq updates from Thomas Gleixner:
"This update provides:
- Yet another two irq controller chip drivers
- A few updates and fixes for GICV3
- A resource managed function for interrupt allocation
- Fixes, updates and enhancements all over the place"
* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
irqchip/qcom: Fix error handling
genirq: Clarify logic calculating bogus irqreturn_t values
genirq/msi: Add stubs for get_cached_msi_msg/pci_write_msi_msg
genirq/devres: Use dev_name(dev) as default for devname
genirq: Fix /proc/interrupts output alignment
irqdesc: Add a resource managed version of irq_alloc_descs()
irqchip/gic-v3-its: Zero command on allocation
irqchip/gic-v3-its: Fix command buffer allocation
irqchip/mips-gic: Fix local interrupts
irqchip: Add a driver for Cortina Gemini
irqchip: DT bindings for Cortina Gemini irqchip
irqchip/gic-v3: Remove duplicate definition of GICD_TYPER_LPIS
irqchip/gic-v3-its: Rename MAPVI to MAPTI
irqchip/gic-v3-its: Drop deprecated GITS_BASER_TYPE_CPU
irqchip/gic-v3-its: Refactor command encoding
irqchip/gic-v3-its: Enable cacheable attribute Read-allocate hints
irqchip/qcom: Add IRQ combiner driver
ACPI: Add support for ResourceSource/IRQ domain mapping
ACPI: Generic GSI: Do not attempt to map non-GSI IRQs during bus scan
irq/platform-msi: Fix comment about maximal MSIs
Linus Torvalds [Mon, 20 Feb 2017 18:06:32 +0000 (10:06 -0800)]
Merge branch 'timers-core-for-linus' of git://git./linux/kernel/git/tip/tip
Pull timer updates from Thomas Gleixner:
"Nothing exciting, just the usual pile of fixes, updates and cleanups:
- A bunch of clocksource driver updates
- Removal of CONFIG_TIMER_STATS and the related /proc file
- More posix timer slim down work
- A scalability enhancement in the tick broadcast code
- Math cleanups"
* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (23 commits)
hrtimer: Catch invalid clockids again
math64, tile: Fix build failure
clocksource/drivers/arm_arch_timer:: Mark cyclecounter __ro_after_init
timerfd: Protect the might cancel mechanism proper
timer_list: Remove useless cast when printing
time: Remove CONFIG_TIMER_STATS
clocksource/drivers/arm_arch_timer: Work around Hisilicon erratum
161010101
clocksource/drivers/arm_arch_timer: Introduce generic errata handling infrastructure
clocksource/drivers/arm_arch_timer: Remove fsl-
a008585 parameter
clocksource/drivers/arm_arch_timer: Add dt binding for hisilicon-
161010101 erratum
clocksource/drivers/ostm: Add renesas-ostm timer driver
clocksource/drivers/ostm: Document renesas-ostm timer DT bindings
clocksource/drivers/tcb_clksrc: Use 32 bit tcb as sched_clock
clocksource/drivers/gemini: Add driver for the Cortina Gemini
clocksource: add DT bindings for Cortina Gemini
clockevents: Add a clkevt-of mechanism like clksrc-of
tick/broadcast: Reduce lock cacheline contention
timers: Omit POSIX timer stuff from task_struct when disabled
x86/timer: Make delay() work during early bootup
delay: Add explanation of udelay() inaccuracy
...
Linus Torvalds [Mon, 20 Feb 2017 18:00:10 +0000 (10:00 -0800)]
Merge tag 'for-v4.11' of git://git./linux/kernel/git/sre/linux-power-supply
Pull power supply and reset updates from Sebastian Reichel:
"New drivers:
- sbs-charger driver
- max14656_charger_detector
- axp20x_ac_power
New chip/feature support"
- axp20x_usb_power: add AXP223 support
- tps65217: add usb charger support
- qcom_smbb: support otg regulator
- at91-reset: add samx7 support
Dropped drivers:
- intel_mid_battery (platform was dropped)
Fixes:
- at91-poweroff: avoid wearing off LPDDR memory
- replace deprecated extcon API
- lots of cleanup and style fixes
- misc minor functionality fixes"
* tag 'for-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/sre/linux-power-supply: (84 commits)
power: supply: add AC power supply driver for AXP20X and AXP22X PMICs
dt-bindings: power: supply: add AXP20X/AXP22X AC power supply
power: supply: axp20x_usb_power: use IIO channels when available
power: supply: max14656: Export I2C and OF device ID as module aliases
power: supply: bq2415x: check for NULL acpi_id to avoid null pointer dereference
power: supply: bq24190_charger: Adjust formatting
power: supply: bq24190_charger: Handle fault before status on interrupt
power: supply: bq24190_charger: Don't read fault register outside irq_handle_thread()
power: supply: bq24190_charger: Call power_supply_changed() for relevant component
power: supply: bq24190_charger: Install irq_handler_thread() at end of probe()
power: supply: bq24190_charger: Call set_mode_host() on pm_resume()
power: supply: bq24190_charger: Fix irq trigger to IRQF_TRIGGER_FALLING
power: supply: qcom_smbb: add regulator dependency
power: reset: at91-reset: remove leftover platform_device_id
power: reset: at91-reset: add samx7 support
power: supply: max14656: fix platform_no_drv_owner.cocci warnings
power: supply: pcf50633-charger: Compress return logic into one line.
power: supply: ab8500_btemp: Compress return logic into one line.
power: reset: at91-poweroff: timely shutdown LPDDR memories
ARM: at91: define LPDDR types
...
Linus Torvalds [Mon, 20 Feb 2017 17:54:46 +0000 (09:54 -0800)]
Merge tag 'edac_for_4.11' of git://git./linux/kernel/git/bp/bp
Pull EDAC updates from Borislav Petkov:
- Make amd64_edac still load on a machine with unpopulated nodes +
cleanups (Yazen Ghannam)
- Expose per-DIMM error counts in sysfs (Aaron Miller)
- Add T2080 l2-cache support to mpc85xx (Chris Packham)
- Random other small improvements/cleanups/fixlets
* tag 'edac_for_4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/bp/bp:
EDAC, mce_amd: Print IPID and Syndrome on a separate line
EDAC, amd64: Bump driver version
MAINTAINERS, EDAC: Update email for Thor Thayer
EDAC, fsl_ddr: Make locally used symbols static
EDAC, mpc85xx: Add T2080 l2-cache support
EDAC, amd64: Add x86cpuid sanity check during init
EDAC, amd64: Don't treat ECC disabled as failure
EDAC: Add routine to check if MC devices list is empty
EDAC, amd64: Remove unused printing macros
EDAC, amd64: Rework messages in ecc_enabled()
EDAC, amd64: Move global code out of instance functions
EDAC, amd64: Free unused memory when init_one_instance() fails
EDAC, mce_amd: Give more context to deferred error message
EDAC, i7300: Test for the second channel properly
EDAC, sb_edac: Get rid of ->show_interleave_mode()
EDAC: Expose per-DIMM error counts in sysfs
EDAC, amd64: Save and return err code from probe_one_instance()
EDAC, i82975x: Add ioremap_nocache() error handling
EDAC: Fix typos in enum mem_type comments
EDAC: Make dev_attr_sdram_scrub_rate static
Linus Torvalds [Mon, 20 Feb 2017 17:52:08 +0000 (09:52 -0800)]
Merge tag 'hwmon-for-linus-v4.11' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon updates from Guenter Roeck:
- new driver for stts751
- it87: Added support for IT8622E and IT8792E; improved support for
other chips
- lm70: Added support for TMP122/124
- use permission-specific DEVICE_ATTR variants where possible
- fixed overflows in various drivers
- minor improvements in various drivers
* tag 'hwmon-for-linus-v4.11' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging: (95 commits)
hwmon: (sht15) Add device tree support
devicetree: add lm90 thermal_zone sensor support
hwmon: (it87) Add support for IT8792E
hwmon: (it87) Do not overwrite bit 2..6 of pwm control registers
hwmon: (it87) Fix pwm4 detection for IT8620 and IT8628
hwmon: (it87) Ensure that pwm control cache is current before updating values
hwmon: (it87) Improve IT8622 support
hwmon: (it87) Add support for IT8622E
hwmon: (it87) Add feature flag indicating that VIN3 is connected to 5V
DT: add binding documentation for STTS751
hwmon: new driver for ST stts751 thermal sensor
hwmon: Register thermal zone only if 'dev' parameter was provided
hwmon: Relax name attribute validation for new APIs
hwmon: Update documentation to clarify rules for the 'name' attribute
hwmon: Make name attribute mandatory for new APIs
hwmon: (lm70) Add support for TI TMP122/124
hwmon: (lm70) Utilize dev_warn instead of pr_warn
hwmon: (ltc4151) Export OF device ID table as module aliases
hwmon: (
adc128d818) Preserve operation mode
hwmon: (
adc128d818) Support operation modes 1-3
...
Linus Torvalds [Mon, 20 Feb 2017 17:23:03 +0000 (09:23 -0800)]
Merge tag 'for-linus-
20170212' of git://git.infradead.org/linux-mtd
Pull MTD updates from Brian Norris:
"MTD updates for 4.11:
General:
- new kernel API for retrieving max bad blocks per die (not used yet)
- track (and expose via sysfs) a partition's device tree node
- support a "label" device tree property for naming an MTD
NAND:
- sunxi: avoid busy-waiting for NAND events
- ifc: fix ECC handling on IFC v1.0
- OX820: add explicit dependency on ARCH_OXNAS in Kconfig
- core: add a new manufacture ID and fix a kernel-doc warning
- fsmc: kill pdata support
- lpc32xx_slc: remove unneeded NULL check
- support dynamic "max bad blocks" detection via ONFI
SPI NOR:
- add support for the 4-byte address instruction set
- add support for new memory parts
- add support to S3AN memories
- add support to the Intel SPI controller
- add support to the Aspeed AST2400 and AST2550 controllers
- support max SPI message sizes in m25p80_read()
- fixes for the Candence and Freescale QSPI drivers
Other:
- add support for Gemini flash probing
- bcm47xxsflash: add support for reading outside memory-mapped window
- bcm47xxparts: extend to support multiple TRX partitions
- misc fixes and typos
Extra note: we've pulled in an MFD subtree from Lee Jones as a
dependency for a new Intel SPI NOR driver"
[ Kudos to Brian for sending pull request a week early:
"I refuse to acknowledge the existence of 4.10-rc8 and am therefore
sending our MTD changes for 4.11 now"
which is all good ]
* tag 'for-linus-
20170212' of git://git.infradead.org/linux-mtd: (52 commits)
mtd: aspeed: remove redundant dev_err call in aspeed_smc_probe()
dt-bindings: mtd: add a common label property to all mtd devices
mtd: name the mtd device with an optional label property
mtd: physmap_of: fixup gemini/versatile dependencies
mtd: spi-nor: cqspi: remove redundant dead code on error return check
Documentation: mtk-quadspi: update DT bindings
mtd: fsl-quadspi: Rename SEQID_QUAD_READ to SEQID_READ
mtd:fsl-quadspi:use the property fields of SPI-NOR
mtd: spi-nor: Add support for gd25q16
mtd: spi-nor: Fix S3AN addressing calculation
mtd: aspeed: fix compile warning in aspeed_smc_read_from_ahb()
mtd: spi-nor: add dt support for Everspin MRAMs
mtd: spi-nor: Add lock/unlock support for f25l32pa
mtd: spi-nor: add a stateless method to support memory size above 128Mib
mtd: spi-nor: rename SPINOR_OP_* macros of the 4-byte address op codes
mtd: m25p80: consider max message size in m25p80_read
mtd: spi-nor: bindings for the Aspeed memory controllers
mtd: aspeed: add memory controllers for the Aspeed AST2400 SoC
mtd: spi-nor: add memory controllers for the Aspeed AST2500 SoC
mtd: spi-nor: remove WARN_ONCE() message in spi_nor_write()
...
Jiri Kosina [Mon, 20 Feb 2017 14:01:57 +0000 (15:01 +0100)]
Merge branches 'for-4.10/upstream-fixes', 'for-4.11/intel-ish', 'for-4.11/mayflash', 'for-4.11/microsoft', 'for-4.11/rmi', 'for-4.11/upstream' and 'for-4.11/wacom' into for-linus
Rafael J. Wysocki [Mon, 20 Feb 2017 13:28:51 +0000 (14:28 +0100)]
Merge branches 'acpi-ec', 'acpi-button' and 'acpi-apei'
* acpi-ec:
ACPI / EC: Use busy polling mode when GPE is not enabled
ACPI / EC: Remove old CLEAR_ON_RESUME quirk
* acpi-button:
ACPI / button: Remove lid_init_state=method mode
ACPI / button: Change default behavior to lid_init_state=open
* acpi-apei:
ACPI, APEI, EINJ: fix malformed newline escape
Rafael J. Wysocki [Mon, 20 Feb 2017 13:28:03 +0000 (14:28 +0100)]
Merge branches 'acpi-bus', 'acpi-sleep' and 'acpi-processor'
* acpi-bus:
spi: acpi: Initialize modalias from of_compatible
i2c: acpi: Initialize info.type from of_compatible
ACPI / bus: Introduce acpi_of_modalias() equiv of of_modalias_node()
* acpi-sleep:
ACPI: save NVS memory for Lenovo G50-45
* acpi-processor:
x86/ACPI: keep x86_cpu_to_acpiid mapping valid on CPU hotplug
Rafael J. Wysocki [Mon, 20 Feb 2017 13:27:08 +0000 (14:27 +0100)]
Merge branch 'acpica'
* acpica: (22 commits)
ACPICA: Update version to
20170119
ACPICA: Tools: Update common signon, remove compilation bit width
ACPICA: Source tree: Update copyright notices to 2017
ACPICA: Linuxize: Restore and fix Intel compiler build
ACPICA: Update version to
20161222
ACPICA: Parser: Update parse info table for some operators
ACPICA: Fix a problem with recent extra support for control method invocations
ACPICA: Parser: Allow method invocations as target operands
ACPICA: Fix for implicit result conversion for the ToXXX functions
ACPICA: Resources: Not a valid resource if buffer length too long
ACPICA: Utilities: Update debug output
ACPICA: Disassembler: Add Switch/Case disassembly support
ACPICA: EFI: Add efihello demo application
ACPICA: MSVC: Fix MSVC6 build issues
ACPICA: Linux-specific header: Add support for s390x compilation
ACPICA: Hardware: Add sleep register hooks
ACPICA: Macro header: Fix some typos in comments
ACPICA: Hardware: Sort access bit width algorithm
ACPICA: Utilities: Add power of two rounding support
ACPICA: Hardware: Add access_width/bit_offset support in acpi_hw_write()
...
Rafael J. Wysocki [Mon, 20 Feb 2017 13:26:34 +0000 (14:26 +0100)]
Merge branch 'pm-tools'
* pm-tools:
tools/power/x86: Debug utility for intel_pstate driver
AnalyzeSuspend: fix drag and zoom bug in javascript
scripts: analyze_suspend.py: Update to upstream v4.5
scripts: analyze_suspend.py: Update to upstream v4.4
scripts: analyze_suspend.py: Update to upstream v4.3
Rafael J. Wysocki [Mon, 20 Feb 2017 13:26:13 +0000 (14:26 +0100)]
Merge branch 'pm-sleep'
* pm-sleep:
PM / Documentation: Spelling s/wrtie/write/
PM / sleep: Fix test_suspend after sleep state rework
PM / Hibernate: Use rb_entry() instead of container_of()
Rafael J. Wysocki [Mon, 20 Feb 2017 13:26:02 +0000 (14:26 +0100)]
Merge branches 'pm-core', 'pm-qos' and 'pm-domains'
* pm-core:
PM / wakeirq: report a wakeup_event on dedicated wekup irq
PM / wakeirq: Fix spurious wake-up events for dedicated wakeirqs
PM / wakeirq: Enable dedicated wakeirq for suspend
* pm-qos:
PM / QoS: Fix memory leak on resume_latency.notifiers
PM / QoS: Remove unneeded linux/miscdevice.h include
* pm-domains:
PM / Domains: Provide dummy governors if CONFIG_PM_GENERIC_DOMAINS=n
PM / Domains: Fix asynchronous execution of *noirq() callbacks
PM / Domains: Correct comment in irq_safe_dev_in_no_sleep_domain()
PM / Domains: Rename functions in genpd for power on/off
Rafael J. Wysocki [Mon, 20 Feb 2017 13:23:40 +0000 (14:23 +0100)]
Merge branch 'pm-devfreq'
* pm-devfreq:
PM / devfreq: Modify the device name as devfreq(X) for sysfs
PM / devfreq: Simplify the sysfs name of devfreq-event device
PM / devfreq: Remove unnecessary separate _remove_devfreq()
PM / devfreq: Fix wrong trans_stat of passive devfreq device
PM / devfreq: Fix available_governor sysfs
PM / devfreq: exynos-ppmu: Show the registred device for ppmu device
PM / devfreq: Fix the wrong description for userspace governor
PM / devfreq: Fix the checkpatch warnings
PM / devfreq: exynos-bus: Print the real clock rate of bus
PM / devfreq: exynos-ppmu: Use the regmap interface to handle the registers
PM / devfreq: exynos-bus: Add the detailed correlation for Exynos5433
PM / devfreq: Don't delete sysfs group twice
Rafael J. Wysocki [Mon, 20 Feb 2017 13:23:21 +0000 (14:23 +0100)]
Merge branch 'pm-cpuidle'
* pm-cpuidle:
CPU / PM: expose pm_qos_resume_latency for CPUs
cpuidle/menu: add per CPU PM QoS resume latency consideration
cpuidle/menu: stop seeking deeper idle if current state is deep enough
ACPI / idle: small formatting fixes
Rafael J. Wysocki [Mon, 20 Feb 2017 13:23:00 +0000 (14:23 +0100)]
Merge branch 'pm-cpufreq'
* pm-cpufreq: (28 commits)
MAINTAINERS: cpufreq: add bmips-cpufreq.c
cpufreq: CPPC: add ACPI_PROCESSOR dependency
cpufreq: make ti-cpufreq explicitly non-modular
cpufreq: Do not clear real_cpus mask on policy init
cpufreq: dt: Don't use generic platdev driver for ti-cpufreq platforms
cpufreq: ti: Add cpufreq driver to determine available OPPs at runtime
Documentation: dt: add bindings for ti-cpufreq
cpufreq: qoriq: Don't look at clock implementation details
cpufreq: qoriq: add ARM64 SoCs support
cpufreq: brcmstb-avs-cpufreq: remove unnecessary platform_set_drvdata()
cpufreq: s3c2416: double free on driver init error path
MIPS: BMIPS: enable CPUfreq
cpufreq: bmips-cpufreq: CPUfreq driver for Broadcom's BMIPS SoCs
BMIPS: Enable prerequisites for CPUfreq in MIPS Kconfig.
MIPS: BMIPS: Update defconfig
cpufreq: Fix typos in comments
cpufreq: intel_pstate: Calculate guaranteed performance for HWP
cpufreq: intel_pstate: Make HWP limits compatible with legacy
cpufreq: intel_pstate: Lower frequency than expected under no_turbo
cpufreq: intel_pstate: Operation mode control from sysfs
...
Rafael J. Wysocki [Mon, 20 Feb 2017 13:22:50 +0000 (14:22 +0100)]
Merge branch 'pm-opp'
* pm-opp: (24 commits)
PM / OPP: Expose _of_get_opp_desc_node as dev_pm_opp API
PM / OPP: Make _find_opp_table_unlocked() static
PM / OPP: Update Documentation to remove RCU specific bits
PM / OPP: Simplify dev_pm_opp_get_max_volt_latency()
PM / OPP: Simplify _opp_set_availability()
PM / OPP: Move away from RCU locking
PM / OPP: Take kref from _find_opp_table()
PM / OPP: Update OPP users to put reference
PM / OPP: Add 'struct kref' to struct dev_pm_opp
PM / OPP: Use dev_pm_opp_get_opp_table() instead of _add_opp_table()
PM / OPP: Take reference of the OPP table while adding/removing OPPs
PM / OPP: Return opp_table from dev_pm_opp_set_*() routines
PM / OPP: Add 'struct kref' to OPP table
PM / OPP: Add per OPP table mutex
PM / OPP: Split out part of _add_opp_table() and _remove_opp_table()
PM / OPP: Don't expose srcu_head to register notifiers
PM / OPP: Rename dev_pm_opp_get_suspend_opp() and return OPP rate
PM / OPP: Don't allocate OPP table from _opp_allocate()
PM / OPP: Rename and split _dev_pm_opp_remove_table()
PM / OPP: Add light weight _opp_free() routine
...
Peter Zijlstra [Sat, 18 Feb 2017 14:26:45 +0000 (15:26 +0100)]
fork: Fix task_struct alignment
Stupid bug that wrecked the alignment of task_struct and causes WARN()s
in the x86 FPU code on some platforms.
Reported-by: Fengguang Wu <fengguang.wu@intel.com>
Tested-by: Fengguang Wu <fengguang.wu@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: e274795ea7b7 ("locking/mutex: Fix mutex handoff")
Link: http://lkml.kernel.org/r/20170218142645.GH6500@twins.programming.kicks-ass.net
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Linus Torvalds [Sun, 19 Feb 2017 22:34:00 +0000 (14:34 -0800)]
Linux 4.10
Al Viro [Sun, 19 Feb 2017 07:15:27 +0000 (07:15 +0000)]
Fix missing sanity check in /dev/sg
What happens is that a write to /dev/sg is given a request with non-zero
->iovec_count combined with zero ->dxfer_len. Or with ->dxferp pointing
to an array full of empty iovecs.
Having write permission to /dev/sg shouldn't be equivalent to the
ability to trigger BUG_ON() while holding spinlocks...
Found by Dmitry Vyukov and syzkaller.
[ The BUG_ON() got changed to a WARN_ON_ONCE(), but this fixes the
underlying issue. - Linus ]
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Reviewed-by: Christoph Hellwig <hch@lst.de>
Cc: stable@vger.kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Johannes Thumshirn [Tue, 31 Jan 2017 09:16:00 +0000 (10:16 +0100)]
scsi: don't BUG_ON() empty DMA transfers
Don't crash the machine just because of an empty transfer. Use WARN_ON()
combined with returning an error.
Found by Dmitry Vyukov and syzkaller.
[ Changed to "WARN_ON_ONCE()". Al has a patch that should fix the root
cause, but a BUG_ON() is not acceptable in any case, and a WARN_ON()
might still be a cause of excessive log spamming.
NOTE! If this warning ever triggers, we may end up leaking resources,
since this doesn't bother to try to clean the command up. So this
WARN_ON_ONCE() triggering does imply real problems. But BUG_ON() is
much worse.
People really need to stop using BUG_ON() for "this shouldn't ever
happen". It makes pretty much any bug worse. - Linus ]
Signed-off-by: Johannes Thumshirn <jthumshirn@suse.de>
Reported-by: Dmitry Vyukov <dvyukov@google.com>
Cc: James Bottomley <jejb@linux.vnet.ibm.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
Mark Brown [Sun, 19 Feb 2017 16:41:17 +0000 (16:41 +0000)]
Merge remote-tracking branches 'spi/topic/ti-qspi' and 'spi/topic/topcliff-pch' into spi-next
Mark Brown [Sun, 19 Feb 2017 16:41:05 +0000 (16:41 +0000)]
Merge remote-tracking branches 'spi/topic/rockchip', 'spi/topic/rspi', 'spi/topic/s3c64xx', 'spi/topic/sh-msiof' and 'spi/topic/slave' into spi-next
Mark Brown [Sun, 19 Feb 2017 16:41:01 +0000 (16:41 +0000)]
Merge remote-tracking branches 'spi/topic/imx', 'spi/topic/lantiq-ssc', 'spi/topic/mpc52xx', 'spi/topic/ppc4xx' and 'spi/topic/pxa2xx' into spi-next
Mark Brown [Sun, 19 Feb 2017 16:40:59 +0000 (16:40 +0000)]
Merge remote-tracking branches 'spi/topic/dw', 'spi/topic/ep93xx', 'spi/topic/falcon' and 'spi/topic/fsl-lpspi' into spi-next
Mark Brown [Sun, 19 Feb 2017 16:40:55 +0000 (16:40 +0000)]
Merge remote-tracking branches 'spi/topic/armada', 'spi/topic/ath79', 'spi/topic/bcm-qspi' and 'spi/topic/bcm53xx' into spi-next
Mark Brown [Sun, 19 Feb 2017 16:40:55 +0000 (16:40 +0000)]
Merge remote-tracking branch 'spi/topic/dma' into spi-next
Mark Brown [Sun, 19 Feb 2017 16:40:55 +0000 (16:40 +0000)]
Merge remote-tracking branch 'spi/topic/core' into spi-next
projects / openwrt / staging / blogic.git / log