openwrt/staging/blogic.git
12 years agomac80211: make scan_sdata pointer usable with RCU
Johannes Berg [Fri, 6 Jul 2012 19:39:28 +0000 (21:39 +0200)]
mac80211: make scan_sdata pointer usable with RCU

Making the scan_sdata pointer usable with RCU makes
it possible to dereference it in the RX path to see
if a received frame actually matches the interface
that is scanning. This is just preparations, making
the pointer __rcu.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: fix invalid band deref building preq IEs
Arik Nemtsov [Mon, 9 Jul 2012 16:57:28 +0000 (19:57 +0300)]
mac80211: fix invalid band deref building preq IEs

The function building probe-request IEs does not validate the band is
supported before dereferencing it. This can result in a panic when
all bands are traversed, as done during sched-scan start.

Warn when this happens and return an empty probe request. Also fix
sched-scan to not waste memory on unsupported bands.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agonl80211: move scan API to wdev
Johannes Berg [Mon, 18 Jun 2012 17:17:03 +0000 (19:17 +0200)]
nl80211: move scan API to wdev

The new P2P Device will have to be able to scan for
P2P search, so move scanning to use struct wireless_dev
instead of struct net_device.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agonl80211: send interface after creation
Johannes Berg [Fri, 15 Jun 2012 22:05:37 +0000 (00:05 +0200)]
nl80211: send interface after creation

After a new virtual interface is created, reply
to userspace with a message detailing it so it
knows the new wdev identifier.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: use wireless_dev for interface management
Johannes Berg [Fri, 15 Jun 2012 22:00:26 +0000 (00:00 +0200)]
cfg80211: use wireless_dev for interface management

In order to be able to create P2P Device wdevs, move
the virtual interface management over to wireless_dev
structures.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: use wdev in mgmt-tx/ROC APIs
Johannes Berg [Fri, 15 Jun 2012 13:30:18 +0000 (15:30 +0200)]
cfg80211: use wdev in mgmt-tx/ROC APIs

The management frame and remain-on-channel APIs will be
needed in the P2P device abstraction, so move them over
to the new wdev-based APIs. Userspace can still use both
the interface index and wdev identifier for them so it's
backward compatible, but for the P2P Device wdev it will
be able to use the wdev identifier only.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agonl80211: don't assume wdev->netdev exists
Johannes Berg [Fri, 15 Jun 2012 16:00:00 +0000 (18:00 +0200)]
nl80211: don't assume wdev->netdev exists

There are a few places that iterate the wdev
list and assume wdev->netdev exists, check
there. The rfkill one has to be extended for
each non-netdev type later.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agonl80211: retrieve interface data by wdev
Johannes Berg [Fri, 15 Jun 2012 15:52:47 +0000 (17:52 +0200)]
nl80211: retrieve interface data by wdev

Since soon there will be virtual interfaces that
don't have a netdev, use the wdev identifier for
the API to retrieve interface data.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agonl80211: add NL80211_FLAG_NEED_WDEV
Johannes Berg [Fri, 15 Jun 2012 13:23:36 +0000 (15:23 +0200)]
nl80211: add NL80211_FLAG_NEED_WDEV

Some nl80211 callbacks will soon need the wdev instead
of the netdev, so add NL80211_FLAG_NEED_WDEV to allow
them to request that. Add NL80211_FLAG_NEED_WDEV_UP as
well which checks the netdev is UP if one exists.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agonl80211: prepare for non-netdev wireless devs
Johannes Berg [Fri, 15 Jun 2012 12:33:17 +0000 (14:33 +0200)]
nl80211: prepare for non-netdev wireless devs

In order to support a P2P device abstraction and
Bluetooth high-speed AMPs, we need to have a way
to identify virtual interfaces that don't have a
netdev associated.

Do this by adding a NL80211_ATTR_WDEV attribute
to identify a wdev which may or may not also be
a netdev.

To simplify things, use a 64-bit value with the
high 32 bits being the wiphy index for this new
wdev identifier in the nl80211 API.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: remove ieee80211_key_removed
Johannes Berg [Fri, 6 Jul 2012 17:49:54 +0000 (19:49 +0200)]
mac80211: remove ieee80211_key_removed

This API call was intended to be used by drivers
if they want to optimize key handling by removing
one key when another is added. Remove it since no
driver is using it. If needed, it can always be
added back.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: remove unused assignment
Johannes Berg [Fri, 6 Jul 2012 19:18:24 +0000 (21:18 +0200)]
mac80211: remove unused assignment

ieee80211_mlme_notify_scan_completed() iterates all
interfaces and doesn't need to assign anything to
the sdata variable before the loop.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: update BSS info on AC parameters change
Johannes Berg [Fri, 6 Jul 2012 15:37:43 +0000 (17:37 +0200)]
mac80211: update BSS info on AC parameters change

When the AC parameters change, drivers might rely
on getting a bss_info_changed notification with
BSS_CHANGED_QOS in addition to the conf_tx call.

Always call the function when userspace updates
are made (in AP/GO modes) and also set the change
flag when updates were made by the AP (in managed
mode.)

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: fix oops due to unassigned set_monitor_enabled callback
Vladimir Kondratiev [Sun, 8 Jul 2012 11:08:10 +0000 (14:08 +0300)]
cfg80211: fix oops due to unassigned set_monitor_enabled callback

Quick fix for method being invoked without checking its existence.

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: request TX status for BlockAck Requests
Christian Lamparter [Sat, 7 Jul 2012 13:13:08 +0000 (15:13 +0200)]
mac80211: request TX status for BlockAck Requests

Because ieee80211_tx_status in status.c checks if
outgoing BlockAck requests have been acked, it is
necessary to tell the driver that tx feedback for
this sort of frame is important.

Otherwise, the stack will continue to send the same
BlockAck request over and over, which can cause
the receiver to flush or clean its reorder buffer
over and over.

Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211_hwsim: add testmode code to stop/wake queues
Johannes Berg [Wed, 4 Jul 2012 10:58:40 +0000 (12:58 +0200)]
mac80211_hwsim: add testmode code to stop/wake queues

This was useful for debugging the queue stop/wake
issues and is pretty small so let's just put it in.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: fix crash with single-queue drivers
Johannes Berg [Wed, 4 Jul 2012 10:49:59 +0000 (12:49 +0200)]
mac80211: fix crash with single-queue drivers

Larry (and some others I think) reported that with
single-queue drivers mac80211 crashes when waking
the queues. This happens because we allocate just
a single queue for each virtual interface in case
the driver doesn't have at least 4 queues, but the
code stopping/waking the virtual interface queues
wasn't taking this into account.

Reported-by: Larry Finger <Larry.Finger@lwfinger.net>
Tested-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: always set in_reconfig=false on wakeup
Eliad Peller [Mon, 2 Jul 2012 12:08:25 +0000 (15:08 +0300)]
mac80211: always set in_reconfig=false on wakeup

If the interfaces were removed just before a restart
work was started, open_count will be 0, and most of
the reconfig work will be skipped, including the
resetting of local->in_reconfig to false.

Leaving local->inconfig = true will result in
dropping any incoming packet.

Fix it by always setting local->in_reconfig = false
(even if there are no active interfaces).

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: fix debugfs default key links
Johannes Berg [Thu, 5 Jul 2012 19:37:05 +0000 (21:37 +0200)]
mac80211: fix debugfs default key links

Due to the way the default key links are created,
it happens that a link is left dangling:
 * both unicast/multicast links are created
 * unicast link is destroyed, and the links
   are updated
 * during this update, adding the multicast
   link again fails because it is present,
   destroying the debugfs pointer
 * removing the multicast link won't work as
   the pointer has been destroyed

Fix this by always removing the links and then
re-creating them if needed.

Reported-by: Marek Lindner <lindner_marek@yahoo.de>
Reported-by: Antonio Quartulli <ordex@autistici.org>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: bitrate calculation for 60g
Vladimir Kondratiev [Thu, 5 Jul 2012 11:25:50 +0000 (14:25 +0300)]
cfg80211: bitrate calculation for 60g

60g band uses different from .11n MCS scheme, so bitrate
should be calculated differently

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years ago{nl,cfg}80211: support high bitrates
Vladimir Kondratiev [Thu, 5 Jul 2012 11:25:49 +0000 (14:25 +0300)]
{nl,cfg}80211: support high bitrates

Until now, a u16 value was used to represent bitrate value.
With VHT bitrates this becomes too small.

Introduce a new 32-bit bitrate attribute. nl80211 will report
both the new and the old attribute, unless the bitrate doesn't
fit into the old u16 attribute in which case only the new one
will be reported.

User space tools encouraged to prefer the 32-bit attribute, if
available (since it won't be available on older kernels.)

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
[reword commit message and comments a bit]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: fix locking regression in monitor channel tracking
Johannes Berg [Wed, 4 Jul 2012 11:28:18 +0000 (13:28 +0200)]
cfg80211: fix locking regression in monitor channel tracking

Michal's monitor channel tracking introduce a locking problem
as it locked the rdev lock inside the netdev notifier which
isn't allowed as we might already hold it if we get there by
removing an interface that is up.

Fix this by relying only on the RTNL to protect the interface
counters, the RTNL is always held in these code paths anyway.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: add TX prepare API
Johannes Berg [Wed, 27 Jun 2012 11:18:36 +0000 (13:18 +0200)]
mac80211: add TX prepare API

Some drivers require setup before being able to send
management frames in managed mode, in particular in
multi-channel cases.

Introduce API to allow the drivers to do such setup
while being able to sleep waiting for the setup to
finish in the device. This isn't possible inside the
TX call since that can't sleep.

A future patch may also restructure the TX retry to
wait for the driver to report the frame status, as
suggested by Arik in
http://mid.gmane.org/CA+XVXffKSEL6ZQPQ98x-zO-NL2=TNF1uN==mprRyUmAaRn254g@mail.gmail.com

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211_hwsim: fix NUM_BANDS usage
Johannes Berg [Tue, 3 Jul 2012 11:14:49 +0000 (13:14 +0200)]
mac80211_hwsim: fix NUM_BANDS usage

Due to the recent change of NUM_BANDS from 2 to 3 hwsim
broke. Fix the code by using the right constant but don't
support bands other than 2.4 and 5 GHz.

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: reduce IEEE80211_TX_MAX_RATES
Thomas Huehn [Mon, 2 Jul 2012 17:46:16 +0000 (19:46 +0200)]
mac80211: reduce IEEE80211_TX_MAX_RATES

IEEE80211_TX_MAX_RATES can be reduced from 5 to 4 as there
is no current hardware supporting a rate chain with 5 multi
rate stages (mrr), so 4 mrr stages are sufficient.

The memory that is freed within the ieee80211_tx_info struct
will be used in the upcoming Transmission Power Control (TPC)
implementation.

Suggested-by: Felix Fietkau <nbd@openwrt.org>
Signed-off-by: Thomas Huehn <thomas@net.t-labs.tu-berlin.de>
[reword commit message]
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: remove tx_frags driver callback
Johannes Berg [Mon, 2 Jul 2012 13:40:18 +0000 (15:40 +0200)]
mac80211: remove tx_frags driver callback

The implementation of tx_frags is buggy due to
not handling queue stop, and there's no driver
implementing it so remove it.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: include VHT capability IE in probe requests
Mahesh Palivela [Mon, 2 Jul 2012 11:25:12 +0000 (11:25 +0000)]
mac80211: include VHT capability IE in probe requests

Insert the VHT capability IE into probe requests.

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agowireless: 60g protocol constants
Vladimir Kondratiev [Mon, 2 Jul 2012 06:32:35 +0000 (09:32 +0300)]
wireless: 60g protocol constants

Provide various constants as defined by the 802.11ad:
frame types, IE's, capability bits, action categories

Introduce GCMP cipher, mandatory by 802.11ad

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agowireless: regulatory for 60g
Vladimir Kondratiev [Mon, 2 Jul 2012 06:32:34 +0000 (09:32 +0300)]
wireless: regulatory for 60g

Add regulatory rule for the 60g band

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: add 802.11ad (60gHz band) support
Vladimir Kondratiev [Mon, 2 Jul 2012 06:32:32 +0000 (09:32 +0300)]
cfg80211: add 802.11ad (60gHz band) support

Add enumerations for both cfg80211 and nl80211.
This expands wiphy.bands etc. arrays.

Extend channel <-> frequency translation to cover 60g band
and modify the rate check logic since there are no legacy
mandatory rates (only MCS is used.)

Signed-off-by: Vladimir Kondratiev <qca_vkondrat@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: allow calling ieee80211_ap_probereq_get() during auth/assoc
Eliad Peller [Thu, 28 Jun 2012 12:03:13 +0000 (15:03 +0300)]
mac80211: allow calling ieee80211_ap_probereq_get() during auth/assoc

Drivers might need getting the probe request
(e.g. in order to extract the ssid) even during
auth/assoc.

Make ieee80211_ap_probereq_get() support it
by considering auth_data/assoc_data as well.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: respect iface combinations when starting operation
Michal Kazior [Fri, 29 Jun 2012 10:47:08 +0000 (12:47 +0200)]
cfg80211: respect iface combinations when starting operation

devlist_mtx locking is changed to accomodate changes.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: add channel checking for iface combinations
Michal Kazior [Fri, 29 Jun 2012 10:47:07 +0000 (12:47 +0200)]
cfg80211: add channel checking for iface combinations

.connect cannot be handled since the driver scans
and connects on its own. It is up to the driver
then to refuse a connection (with -EBUSY for
example).

Non-fixed channel IBSSes always take a single
channel resource. For example two non-fixed
channel IBSSes always take up 2
num_different_channels, even if they operate on
the same channel at a given point of time.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211/mac80211: remove .get_channel
Michal Kazior [Fri, 29 Jun 2012 10:47:06 +0000 (12:47 +0200)]
cfg80211/mac80211: remove .get_channel

We do not need it anymore since cfg80211 tracks
monitor channel and monitor channel type.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: set initial monitor channel
Michal Kazior [Fri, 29 Jun 2012 10:47:05 +0000 (12:47 +0200)]
cfg80211: set initial monitor channel

Implements behaviour seen in mac80211. A running
monitor always has a channel - even before
.set_channel. This way we won't break current
behaviour.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: track monitor channel
Michal Kazior [Fri, 29 Jun 2012 10:47:04 +0000 (12:47 +0200)]
cfg80211: track monitor channel

Make it even more obvious we support single
monitor channel. This will allow us to remove
.get_channel.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: refuse to .set_monitor_channel when non-monitors are present
Michal Kazior [Fri, 29 Jun 2012 10:47:03 +0000 (12:47 +0200)]
cfg80211: refuse to .set_monitor_channel when non-monitors are present

Having .set_monitor_channel work with non-monitor
interfaces running would make interface
combinations accounting ambiguous.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: refactor virtual monitor code
Michal Kazior [Fri, 29 Jun 2012 10:47:02 +0000 (12:47 +0200)]
mac80211: refactor virtual monitor code

Use cfg80211 the new .set_monitor_enabled instead
of tracking it inside mac80211.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: track monitor interfaces count
Michal Kazior [Fri, 29 Jun 2012 10:47:01 +0000 (12:47 +0200)]
cfg80211: track monitor interfaces count

Implements .set_monitor_enabled(wiphy, enabled).

Notifies driver upon change of interface layout.

If only monitor interfaces become present it is
called with 2nd argument being true. If
non-monitor interface appears then 2nd argument
is false. Driver is notified only upon change.

This makes it more obvious about the fact that
cfg80211 supports single monitor channel. Once we
implement multi-channel we don't want to allow
setting monitor channel while other interface
types are running. Otherwise it would be ambiguous
once we start considering num_different_channels.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: introduce cfg80211_get_chan_state
Michal Kazior [Fri, 29 Jun 2012 10:47:00 +0000 (12:47 +0200)]
cfg80211: introduce cfg80211_get_chan_state

Helper function for finding out which channel is
used by a given interface.

An exclusive channel can be used only by a single
interface. This is mainly for non-fixed channel
IBSS handling.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: track ibss fixed channel
Michal Kazior [Fri, 29 Jun 2012 10:46:59 +0000 (12:46 +0200)]
cfg80211: track ibss fixed channel

IBSS may hop between channels. It is necessary to
account this special case when considering
interface combinations.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: add channel tracking for AP and mesh
Michal Kazior [Fri, 29 Jun 2012 10:46:58 +0000 (12:46 +0200)]
cfg80211: add channel tracking for AP and mesh

We need to know which channel is used by a running
AP and mesh for channel context accounting and
finding matching/active interface combination.

STA/IBSS have current_bss already which allows us
to check which channel a vif is tuned to.
Non-fixed channel IBSS can be handled with
additional changes.

Monitor mode is going to be handled differently.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: .stop_ap when interface is going down
Michal Kazior [Fri, 29 Jun 2012 10:46:57 +0000 (12:46 +0200)]
cfg80211: .stop_ap when interface is going down

We'll need this for proper channel tracking (which
is going to be needed for channel context
accounting and finding matching/active interface
combination).

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agocfg80211: introduce cfg80211_stop_ap
Michal Kazior [Fri, 29 Jun 2012 10:46:56 +0000 (12:46 +0200)]
cfg80211: introduce cfg80211_stop_ap

This functionality will be reused when interface
is going down. Avoids code duplication. Also adds
missing wdev locking.

Signed-off-by: Michal Kazior <michal.kazior@tieto.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agoMerge remote-tracking branch 'wireless-next/master' into mac80211-next
Johannes Berg [Thu, 28 Jun 2012 11:45:58 +0000 (13:45 +0200)]
Merge remote-tracking branch 'wireless-next/master' into mac80211-next

12 years agocfg80211: allow advertising VHT capabilities
Mahesh Palivela [Fri, 22 Jun 2012 07:27:46 +0000 (07:27 +0000)]
cfg80211: allow advertising VHT capabilities

Allow drivers to advertise their VHT capabilities
and export them to userspace via nl80211.

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agowireless: add VHT (802.11ac) definitions
Mahesh Palivela [Fri, 22 Jun 2012 07:27:46 +0000 (07:27 +0000)]
wireless: add VHT (802.11ac) definitions

Add the VHT definitions to be used by drivers supporting it.

Signed-off-by: Mahesh Palivela <maheshp@posedge.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: don't require associated->beacon_ies for ps
Eliad Peller [Mon, 25 Jun 2012 07:48:25 +0000 (10:48 +0300)]
mac80211: don't require associated->beacon_ies for ps

beacon_ies is needed only in order to extract the dtim
period. However, even if it's missing we can still enter
ps with dtim=1 (which also happens if the TIM ie is invalid).

Most drivers don't use conf.max_sleep_period/ps_dtim_period
anyway, and this check prevents them from entering ps if
they don't have beacon (but only probe response), even though
the beacon is not needed at all.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: flush queues before deauth/disassoc
Eliad Peller [Wed, 27 Jun 2012 11:18:22 +0000 (14:18 +0300)]
mac80211: flush queues before deauth/disassoc

On deauth/disassoc we tear down all BA sessions. These
DELBA packets are sent on the appropriate TID, while
deauth/disassoc is always sent on VO. This sometimes
ends with the DELBA being sent after the deauth was
already sent.

Fix it by flushing all the pending frames before
sending deauth/disassoc.

Signed-off-by: Eliad Peller <eliad@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: don't expose ieee80211_add_srates_ie()
Johannes Berg [Thu, 28 Jun 2012 08:33:25 +0000 (10:33 +0200)]
mac80211: don't expose ieee80211_add_srates_ie()

This and ieee80211_add_ext_srates_ie() aren't
exported, so can't be used by drivers anyway,
but there's also no reason that they should be
so make them private to mac80211 and use sdata
instead of vif arguments.

Acked-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agoath9k: Fix compilation breakage
Sujith Manoharan [Wed, 27 Jun 2012 08:45:59 +0000 (14:15 +0530)]
ath9k: Fix compilation breakage

Wrap the MCI-work canceling with CONFIG_ATH9K_BTCOEX_SUPPORT.

Reported-by: Emmanuel Benisty <benisty.e@gmail.com>
Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: fix sparse warning introduced with checkdied patch
Arend van Spriel [Tue, 26 Jun 2012 19:26:40 +0000 (21:26 +0200)]
brcmfmac: fix sparse warning introduced with checkdied patch

The commit "brcmfmac: introduce checkdied debugfs functionality"
also introduced a sparse warning:

..../brcmfmac/dhd_sdio.c:3147:45: sparse: cast to restricted __le32

This patch fixes this sparse warning.

Reported-by: Fengguang Wu <wfg@linux.intel.com>
Reviewed-by: Franky (Zhenhui) Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: add BCM4334 support
Franky Lin [Tue, 26 Jun 2012 19:26:39 +0000 (21:26 +0200)]
brcmfmac: add BCM4334 support

BCM4334 is a dualband a/b/g/n WiFi chip support 20MHz/40MHz
channels. This patch adds support for its SDIO interface.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: reduce allocations needed during nvram data download
Arend van Spriel [Tue, 26 Jun 2012 19:26:38 +0000 (21:26 +0200)]
brcmfmac: reduce allocations needed during nvram data download

The nvram data is preprocessed before being sent to the device
and just before sending an additional allocation was done that
assured word alignment of the data. This has moved to the
preprocessing step to reduce allocations and subsequent copying
of the nvram data.

Reviewed-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: use firmware data buffer directly for nvram
Franky Lin [Tue, 26 Jun 2012 19:26:37 +0000 (21:26 +0200)]
brcmfmac: use firmware data buffer directly for nvram

The nvram file could be parsed directly in the data buffer in the
firmware structure passed by request_firmware function. This patch
gets rid of the redundant memcpy.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: move glom alignment setting to SDIO bus layer
Franky Lin [Tue, 26 Jun 2012 19:26:36 +0000 (21:26 +0200)]
brcmfmac: move glom alignment setting to SDIO bus layer

txglomming alignment is a SDIO bus specific feature. It is more
appropriate to place it in SDIO bus layer instead of common layer.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: restrict dongle txglom disable to old SDIO core
Franky Lin [Tue, 26 Jun 2012 19:26:35 +0000 (21:26 +0200)]
brcmfmac: restrict dongle txglom disable to old SDIO core

txglomming is a firmware feature for sdio bus interface. For SDIO
device cores newer than revision 11, the default setting of
firmware should be used instead of disabling it from the host side.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: add support for bus specific data command
Franky Lin [Tue, 26 Jun 2012 19:26:34 +0000 (21:26 +0200)]
brcmfmac: add support for bus specific data command

brcmfmac need to support data command setting for dongle's bus
core. A list must be placed at brcmf_bus structure before calling
brcmf_bus_start in order to be sent by brcmf_c_preinit_dcmds.

Reviewed-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: Franky Lin <frankyl@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobcma: define some additional cores IDs
Rafał Miłecki [Mon, 25 Jun 2012 20:12:20 +0000 (22:12 +0200)]
bcma: define some additional cores IDs

Some of them are BCM4706 specific AFAWK. Most of them was confirmed on
Netgear WNDR450.

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agocfg80211: don't allow WoWLAN support without CONFIG_PM
Johannes Berg [Wed, 27 Jun 2012 07:23:48 +0000 (09:23 +0200)]
cfg80211: don't allow WoWLAN support without CONFIG_PM

When CONFIG_PM is disabled, no device can possibly
support WoWLAN since it can't go to sleep to start
with. Due to this, mac80211 had even rejected the
hardware registration. By making all the code and
data for WoWLAN depend on CONFIG_PM we can promote
this runtime error to a compile-time error.

Add #ifdef around all WoWLAN code to remove it in
systems that don't need it as they never suspend.

Cc: Kalle Valo <kvalo@qca.qualcomm.com>
Acked-by: Luciano Coelho <coelho@ti.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agoMerge branch 'wl12xx-next' into for-linville
Luciano Coelho [Tue, 26 Jun 2012 19:43:29 +0000 (22:43 +0300)]
Merge branch 'wl12xx-next' into for-linville

12 years agoath9k_htc: Fix IDLE power save
Sujith Manoharan [Mon, 25 Jun 2012 08:24:49 +0000 (13:54 +0530)]
ath9k_htc: Fix IDLE power save

Remove the radio enable/disable stuff and fix the
transition to FULL_SLEEP mode when the device is idle.

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_htc: Use atomic operations for op_flags
Sujith Manoharan [Mon, 25 Jun 2012 08:24:41 +0000 (13:54 +0530)]
ath9k_htc: Use atomic operations for op_flags

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_htc: Change default listen interval to 1
Sujith Manoharan [Mon, 25 Jun 2012 08:24:30 +0000 (13:54 +0530)]
ath9k_htc: Change default listen interval to 1

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: Fix lockdep splat
Sujith Manoharan [Mon, 25 Jun 2012 08:24:22 +0000 (13:54 +0530)]
ath9k: Fix lockdep splat

Cancel the MCI work only when MCI is actually enabled.
Fixes this:

[96833.124051] Call Trace:
[96833.124060]  [<ffffffff810afaf8>] __lock_acquire+0x1518/0x1e40
[96833.124065]  [<ffffffff810ad126>] ? mark_held_locks+0x86/0x110
[96833.124069]  [<ffffffff810ad3ad>] ? trace_hardirqs_on+0xd/0x10
[96833.124073]  [<ffffffff814464f0>] ? _raw_spin_unlock_irq+0x30/0x70
[96833.124078]  [<ffffffff81072968>] ? wait_on_cpu_work+0x98/0xc0
[96833.124082]  [<ffffffff810b0a11>] lock_acquire+0xa1/0x150
[96833.124085]  [<ffffffff81072990>] ? wait_on_cpu_work+0xc0/0xc0
[96833.124088]  [<ffffffff81072990>] ? wait_on_cpu_work+0xc0/0xc0
[96833.124092]  [<ffffffff810729e2>] wait_on_work+0x52/0x120
[96833.124095]  [<ffffffff81072990>] ? wait_on_cpu_work+0xc0/0xc0
[96833.124099]  [<ffffffff81063b3f>] ? del_timer+0x7f/0x110
[96833.124102]  [<ffffffff81072c13>] __cancel_work_timer+0x83/0x130
[96833.124106]  [<ffffffff81072cf0>] cancel_work_sync+0x10/0x20
[96833.124113]  [<ffffffffa065b5cd>] __ath_cancel_work+0x4d/0x60 [ath9k]
[96833.124119]  [<ffffffffa065cf28>] ath9k_config+0x458/0x680 [ath9k]
[96833.124125]  [<ffffffffa065dd1e>] ? ath9k_flush+0x6e/0x1d0 [ath9k]
[96833.124129]  [<ffffffff8144394d>] ? __mutex_unlock_slowpath+0x10d/0x190
[96833.124146]  [<ffffffffa056c7b5>] ieee80211_hw_config+0x135/0x2a0 [mac80211]
[96833.124163]  [<ffffffffa057ebbb>] ieee80211_do_open+0x67b/0xc50 [mac80211]
[96833.124178]  [<ffffffffa057f1fd>] ieee80211_open+0x6d/0x80 [mac80211]
[96833.124183]  [<ffffffff8137a44f>] __dev_open+0x9f/0xf0
[96833.124187]  [<ffffffff8137a701>] __dev_change_flags+0xa1/0x180
[96833.124190]  [<ffffffff8137a898>] dev_change_flags+0x28/0x70
[96833.124195]  [<ffffffff813e1179>] devinet_ioctl+0x659/0x780
[96833.124199]  [<ffffffff8137aea0>] ? dev_ioctl+0x210/0x6d0
[96833.124203]  [<ffffffff813e1db5>] inet_ioctl+0x75/0x90
[96833.124208]  [<ffffffff8135e0e0>] sock_do_ioctl+0x30/0x70
[96833.124211]  [<ffffffff8135e3dd>] sock_ioctl+0x7d/0x2c0
[96833.124218]  [<ffffffff81193c39>] do_vfs_ioctl+0x99/0x580
[96833.124222]  [<ffffffff81447415>] ? sysret_check+0x22/0x5d
[96833.124226]  [<ffffffff811941b9>] sys_ioctl+0x99/0xa0
[96833.124230]  [<ffffffff814473e9>] system_call_fastpath+0x16/0x1b

Signed-off-by: Sujith Manoharan <c_manoha@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k: raise aggregation limit to 64k for HT IBSS
Sven Eckelmann [Mon, 25 Jun 2012 05:15:22 +0000 (07:15 +0200)]
ath9k: raise aggregation limit to 64k for HT IBSS

mac80211 adds stations in HT IBSS as soon as a frame comes by,
even if the HT capabilities are not known yet (they are often
received later, e.g. in beacons). So far, ampdu factor/density
are only calculated when the station is initially added.

This patch changes this to update ampdu factor/density settings
when starting a blockack session.

Using this patch, we had performance boosts from 60 to 150 MBit/s
between two 2x2 Atheros devices in 5 GHz HT IBSS mode.

Signed-off-by: Sven Eckelmann <sven@narfation.org>
Signed-off-by: Simon Wunderlich <siwu@hrz.tu-chemnitz.de>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agortlwifi: rtl8192se: Fix double inclusion of header pci.h
Larry Finger [Sun, 24 Jun 2012 19:44:36 +0000 (14:44 -0500)]
rtlwifi: rtl8192se: Fix double inclusion of header pci.h

The command "make includecheck" yields the following for the rtlwifi tree:

/home/finger/linux-2.6/drivers/net/wireless/rtlwifi/rtl8192se/sw.c: ../pci.h is included more than once.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agortlwifi: Fix IRQ disabled warning
Larry Finger [Sun, 24 Jun 2012 16:06:29 +0000 (11:06 -0500)]
rtlwifi: Fix IRQ disabled warning

The PCI-based drivers can generate the following warning:

[ 9497.776350] ------------[ cut here ]------------
[ 9497.776366] WARNING: at kernel/softirq.c:159 local_bh_enable_ip+0x7a/0xa0()
[ 9497.776370] Hardware name: 05794NC
[ 9497.776597] Pid: 6413, comm: hostapd Not tainted 3.3.0-4.fc16.x86_64 #1
[ 9497.776601] Call Trace:
[ 9497.776612]  [<ffffffff81057b1f>] warn_slowpath_common+0x7f/0xc0
[ 9497.776633]  [<ffffffffa034a099>] ? rtl_pci_reset_trx_ring+0x199/0x230
[rtlwifi]
[ 9497.776640]  [<ffffffff81057b7a>] warn_slowpath_null+0x1a/0x20
[ 9497.776646]  [<ffffffff8105f06a>] local_bh_enable_ip+0x7a/0xa0
[ 9497.776654]  [<ffffffff815f3ef6>] _raw_spin_unlock_bh+0x16/0x20
[ 9497.776671]  [<ffffffffa03e50de>] destroy_conntrack+0x9e/0x120
[nf_conntrack]
[ 9497.776681]  [<ffffffff81511847>] nf_conntrack_destroy+0x17/0x20
[ 9497.776689]  [<ffffffff814d9c85>] skb_release_head_state+0xe5/0x120
[ 9497.776695]  [<ffffffff814d98b6>] __kfree_skb+0x16/0xa0
[ 9497.776700]  [<ffffffff814d9a35>] kfree_skb+0x45/0xc0
[ 9497.776717]  [<ffffffffa034a099>] rtl_pci_reset_trx_ring+0x199/0x230
[rtlwifi]
[ 9497.776734]  [<ffffffffa034a155>] rtl_pci_start+0x25/0x1d0 [rtlwifi]
[ 9497.776750]  [<ffffffffa03440b5>] rtl_op_start+0x55/0x90 [rtlwifi]
[ 9497.776785]  [<ffffffffa02c4956>] ieee80211_do_open+0x296/0xa10 [mac80211]
[ 9497.776794]  [<ffffffff815f7ddd>] ? notifier_call_chain+0x4d/0x70
[ 9497.776828]  [<ffffffffa02c513d>] ieee80211_open+0x6d/0x80 [mac80211]
[ 9497.776836]  [<ffffffff814e8b3f>] __dev_open+0x8f/0xe0
[ 9497.776842]  [<ffffffff814e8de1>] __dev_change_flags+0xa1/0x180
[ 9497.776847]  [<ffffffff814e8f78>] dev_change_flags+0x28/0x70
[ 9497.776856]  [<ffffffff8154e99d>] devinet_ioctl+0x61d/0x7b0
[ 9497.776863]  [<ffffffff8154ef55>] inet_ioctl+0x75/0x90
[ 9497.776870]  [<ffffffff814cdd50>] sock_do_ioctl+0x30/0x70
[ 9497.776876]  [<ffffffff814cee09>] sock_ioctl+0x79/0x2f0
[ 9497.776885]  [<ffffffff81193498>] do_vfs_ioctl+0x98/0x550
[ 9497.776891]  [<ffffffff811939e1>] sys_ioctl+0x91/0xa0
[ 9497.776897]  [<ffffffff815fc029>] system_call_fastpath+0x16/0x1b
[ 9497.776902] ---[ end trace 22886c442489082d ]---

The cause is due to calling kfree_skb() with interrupts disabled.

This bug is discussed in https://bugzilla.redhat.com/show_bug.cgi?id=797709.

Reported-and-Tested by: Ivan Ivanovich <iivanich@gmail.com>
Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoMerge branch 'for-john' of git://git.sipsolutions.net/mac80211-next
John W. Linville [Tue, 26 Jun 2012 18:27:34 +0000 (14:27 -0400)]
Merge branch 'for-john' of git://git.sipsolutions.net/mac80211-next

12 years agowlcore: print stack trace in every recovery
Eyal Shapira [Tue, 26 Jun 2012 07:41:17 +0000 (10:41 +0300)]
wlcore: print stack trace in every recovery

As recovery queuing can now occur from multiple code paths
it's convenient to know what triggered it in all cases
other than an intended recovery which is part of the
switch between single role to multi role.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowlcore: queue recovery in case of bus errors during cmd_remove_peer
Eyal Shapira [Tue, 26 Jun 2012 07:41:16 +0000 (10:41 +0300)]
wlcore: queue recovery in case of bus errors during cmd_remove_peer

Following the addition of propagating errors from the bus ops
there's a need to distinguish between bus errors (including timeout)
and a legitimate timeout occuring in cmd_wait_for_event_or_timeout.
In case of real bus errors we need to queue recovery even in cases
where a timeout on a response from the FW to a command is acceptable.

Reported-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowlcore: fix broken TX due to wrong queuing of recovery
Eyal Shapira [Tue, 26 Jun 2012 07:41:15 +0000 (10:41 +0300)]
wlcore: fix broken TX due to wrong queuing of recovery

commit 14bba17b "wl12xx: Propagate errors from wl1271_raw_write32"
breaks down TX in certain scenarios. wl1271_irq_locked() propagates
errors from wl1271_tx_work_locked however it may return -EBUSY
when the FW queues are full which is a legitimate case and not a
a real error. In this case a recovery is triggered by wl1271_irq
and this keeps repeating itself so TX is completely broken.
Fix it by avoiding propagating return values as errors even if they
aren't. Only bus (SDIO or SPI) ops failures would be progagated
as only these should trigger recovery.

Signed-off-by: Eyal Shapira <eyal@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowlcore: fix some failure cases in wlcore_probe()
Luciano Coelho [Mon, 25 Jun 2012 11:41:20 +0000 (14:41 +0300)]
wlcore: fix some failure cases in wlcore_probe()

We need to release the IRQ if hw_info() or identify_chip() fails.  And
we need unregister the HW with mac80211 if there are any failures
after it's registered.

Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowl18xx: deprecate PG1 support
Luciano Coelho [Mon, 25 Jun 2012 11:15:55 +0000 (14:15 +0300)]
wl18xx: deprecate PG1 support

The new PG2 version of the chip has a few differences in terms of FW
API if compared to PG1.  PG1 is just a sample that shouldn't be used
in real life, so to avoid having to handle both separately, mark the
PG1 version as deprecated and bail out during probe.

Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agomac80211: make __ieee80211_recalc_idle static
Johannes Berg [Thu, 21 Jun 2012 20:30:52 +0000 (22:30 +0200)]
mac80211: make __ieee80211_recalc_idle static

Since it's not called from any file outside where
it's defined, the function can be static if moved
up in the file before the callers.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: make ieee80211_check_concurrent_iface netdev-independent
Johannes Berg [Tue, 19 Jun 2012 13:54:05 +0000 (15:54 +0200)]
mac80211: make ieee80211_check_concurrent_iface netdev-independent

ieee80211_check_concurrent_iface() need not use the
netdev. Remove the use of the netdev here to prepare
the function for P2P device addition.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: remove unused function
Johannes Berg [Tue, 19 Jun 2012 14:16:22 +0000 (16:16 +0200)]
mac80211: remove unused function

Remove the unused function is_ieee80211_device().

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agonl80211: specify RSSI threshold in scheduled scan
Thomas Pedersen [Thu, 21 Jun 2012 18:09:54 +0000 (11:09 -0700)]
nl80211: specify RSSI threshold in scheduled scan

Support configuring an RSSI threshold in dBm (s32) when requesting
scheduled scan, below which a BSS won't be reported by the cfg80211
driver.

Signed-off-by: Thomas Pedersen <c_tpeder@qca.qualcomm.com>
Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211_hwsim: fix smatch/sparse complaints
Johannes Berg [Mon, 25 Jun 2012 12:46:44 +0000 (14:46 +0200)]
mac80211_hwsim: fix smatch/sparse complaints

The code is fine in both cases as-is, but we can
write it slightly differently to fix smatch/sparse
complaints:
 * compare the skb pointer (which we use as a cookie)
   by casting the skb to unsigned long rather than the
   cookie to a pointer (fixes "different address spaces")
 * when transmitting, data->channel must be assigned,
   don't check it (fixes "dereferenced before check")

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: trace debug messages
Johannes Berg [Fri, 22 Jun 2012 11:36:25 +0000 (13:36 +0200)]
mac80211: trace debug messages

It can be very useful to have all debug messages
available when debugging, but hard to correlate
between different sources, so add a trace event
for all mac80211 debug messages.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: rename driver-trace file
Johannes Berg [Fri, 22 Jun 2012 10:55:52 +0000 (12:55 +0200)]
mac80211: rename driver-trace file

This file will contain more soon, so
rename it to just trace.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agomac80211: clean up debugging
Johannes Berg [Fri, 22 Jun 2012 09:29:50 +0000 (11:29 +0200)]
mac80211: clean up debugging

There are a few things that make the logging and
debugging in mac80211 less useful than it should
be right now:
 * a lot of messages should be pr_info, not pr_debug
 * wholesale use of pr_debug makes it require *both*
   Kconfig and dynamic configuration
 * there are still a lot of ifdefs
 * the style is very inconsistent, sometimes the
   sdata->name is printed in front

Clean up everything, introducing new macros and
separating out the station MLME debugging into
a new Kconfig symbol.

Signed-off-by: Johannes Berg <johannes.berg@intel.com>
12 years agowlcore: prevent recovery in the middle of resume
Arik Nemtsov [Thu, 21 Jun 2012 15:10:52 +0000 (18:10 +0300)]
wlcore: prevent recovery in the middle of resume

Take the mutex early in the resume handler and use the locked version of
the IRQ routine. This ensures any recoveries queued will only take place
after resume has fully completed.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowlcore: refactor threaded IRQ routine
Arik Nemtsov [Thu, 21 Jun 2012 15:10:51 +0000 (18:10 +0300)]
wlcore: refactor threaded IRQ routine

Separate the threaded IRQ handling routine into two functions.
The outer function takes the mutex and calls recovery on errors. It also
performs a Tx-path optimization to avoid redundant works.

The inner function is simplified - all calls to recovery are removed and
it assumes the lock is taken. The locked variant will be reused elsewhere.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowlcore: check Rx-filter functions in the suspend path
Arik Nemtsov [Thu, 21 Jun 2012 15:10:50 +0000 (18:10 +0300)]
wlcore: check Rx-filter functions in the suspend path

Propagate some missing return values for Rx-filter related functions.
This and makes sure we always fail the suspend in case of SDIO errors.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowlcore: force recovery on resume if suspended without recovering
Arik Nemtsov [Thu, 21 Jun 2012 15:10:49 +0000 (18:10 +0300)]
wlcore: force recovery on resume if suspended without recovering

If an error is detected after mac80211 is already suspended, the recovery
work will not be queued. This will leave the driver in a bad state on
resume.

Detect this in the resume op and re-queue a recovery.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowlcore: don't allow SDIO read/writes after failure
Arik Nemtsov [Thu, 21 Jun 2012 15:10:48 +0000 (18:10 +0300)]
wlcore: don't allow SDIO read/writes after failure

Set a flag and after the first read/write failure is encountered.
This flag will disallow further SDIO read/writes until op_stop() is
executed, which will clear all flags.

This prevents further errors from occurring, since one error usually
indicates that IO operations won't work anymore until the chip is
rebooted.  By blocking more calls, we avoid extra timeouts and having
to wait for them to occur.

[Added second paragraph explaining why the change is needed. -- Luca]

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowlcore: cancel suspend when recovery is pending
Arik Nemtsov [Thu, 21 Jun 2012 15:10:47 +0000 (18:10 +0300)]
wlcore: cancel suspend when recovery is pending

We wish to postpone suspend if recovery is pending. This will make sure
the FW is in a good state and perform wowlan wakeup.

Signed-off-by: Arik Nemtsov <arik@wizery.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agowlcore: access the firmware memory via debugfs
Arkady Miasnikov [Mon, 18 Jun 2012 13:21:12 +0000 (16:21 +0300)]
wlcore: access the firmware memory via debugfs

Applications running in the user space needs access to the
memory of the chip. Examples of such access
- read/write global variables
- access to firmware log
- dump memory after firmware panic event

Arbitrary 4-bytes aligned location can be accessed by
read/write file wlcore/mem

[Check return value of wlcore_raw_read/write and wlcore_set_partition
calls as required by the recent IO changes. -- Luca]

Signed-off-by: Arkady Miasnikov <a-miasnikov@ti.com>
Signed-off-by: Luciano Coelho <coelho@ti.com>
12 years agortlwifi: Change debug level for deletion of an entry in CAM
Larry Finger [Thu, 21 Jun 2012 18:08:04 +0000 (13:08 -0500)]
rtlwifi: Change debug level for deletion of an entry in CAM

When running in AP mode, the driver reports all deletions from CAM in
a cryptic manner that makes users think it is an error. change so that
the condition is only reported at higher-levels of debugging.

Signed-off-by: Larry Finger <Larry.Finger@lwfinger.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: fix smatch warning in ar9003_hw_spur_mitigate_mrc_cck
Rajkumar Manoharan [Thu, 21 Jun 2012 15:04:00 +0000 (20:34 +0530)]
ath9k_hw: fix smatch warning in ar9003_hw_spur_mitigate_mrc_cck

drivers/net/wireless/ath/ath9k/ar9003_phy.c:211
ar9003_hw_spur_mitigate_mrc_cck() error: potential NULL dereference
'spur_fbin_ptr'.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoath9k_hw: rename mrcCCKOff to fix smatch warning
Rajkumar Manoharan [Thu, 21 Jun 2012 15:03:59 +0000 (20:33 +0530)]
ath9k_hw: rename mrcCCKOff to fix smatch warning

Rename mrcCCKOff for better code readability and also fixes
the smatch warning.

drivers/net/wireless/ath/ath9k/ar9003_phy.c:982
ar9003_hw_ani_control() Error invalid range 1 to 0.

Signed-off-by: Rajkumar Manoharan <rmanohar@qca.qualcomm.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmsmac: fix NULL pointer crash in brcms_c_regd_init()
Arend van Spriel [Thu, 21 Jun 2012 13:49:13 +0000 (15:49 +0200)]
brcmsmac: fix NULL pointer crash in brcms_c_regd_init()

In the function brcms_c_regd_init() the channels are validated
against the device capabilities. This is done for both 2.4G and
5G band, but there are devices that are 2.4G only, ie. BCM4313.
For that device this leads to a NULL dereference. This patch adds
a check in brcms_c_regd_init() to fix this.

Issue introduced in wireless-next tree by following commit:
cf03c5d brcm80211: smac: inform mac80211 of the X2 regulatory domain

Cc: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agobrcmfmac: make inclusion of vmalloc.h explicit fixing linux-next build
Arend van Spriel [Thu, 21 Jun 2012 09:33:32 +0000 (11:33 +0200)]
brcmfmac: make inclusion of vmalloc.h explicit fixing linux-next build

This patch fixes problem detected in linux-next build for powerpc
allyesconfig. The error message below is no longer observed:

  CC      drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.o
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c: In function 'brcmf_sdio_dump_console':
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c:3085: error: implicit declaration of function 'vzalloc'
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c:3085: warning: assignment makes pointer from integer without a cast
drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.c:3113: error: implicit declaration of function 'vfree'
make[2]: *** [drivers/net/wireless/brcm80211/brcmfmac/dhd_sdio.o] Error 1

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arend van Spriel <arend@broadcom.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: enhance power save for USB and PCIe chipsets
Amitkumar Karwar [Thu, 21 Jun 2012 02:58:37 +0000 (19:58 -0700)]
mwifiex: enhance power save for USB and PCIe chipsets

FW will not explicitly notify about host sleep activation to the
host for USB and PCIe chipsets. Hence host should generate Host
Sleep Activated event as soon as Host Sleep parameters are
configured to FW successfully.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: wake up main thread to handle Tx traffic if scan is delayed/aborted
Amitkumar Karwar [Thu, 21 Jun 2012 02:58:36 +0000 (19:58 -0700)]
mwifiex: wake up main thread to handle Tx traffic if scan is delayed/aborted

This is a flaw in recently implemented logic to handle Tx traffic
and scan operation simultaneously. We missed to wakeup main thread
to handle Tx traffic if scan is delayed/aborted.

For some cards (SD8797, for example), firmware will send SLEEP event
if there is no activity for 50msec. While handling the SLEEP event,
main thread will be woken up and Tx packet gets sent hence. In worst
case Tx traffic will be delayed for 50msec.

For other cards, such as USB8797, firmware won't send SLEEP event.
So, Tx traffic gets stuck if no other event triggers the wakeup of
main thread.

This patch fixes above issues.

Signed-off-by: Amitkumar Karwar <akarwar@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agomwifiex: parse WPA IE and support WPA/WPA2 mixed mode for uAP
Avinash Patil [Fri, 15 Jun 2012 19:21:52 +0000 (12:21 -0700)]
mwifiex: parse WPA IE and support WPA/WPA2 mixed mode for uAP

Add support for parsing WPA IE from beacon parameter of
cfg80211_ap_settings and set it to FW.

WPA/WPA2 mixed mode is supported with this patch.

Signed-off-by: Avinash Patil <patila@marvell.com>
Signed-off-by: Kiran Divekar <dkiran@marvell.com>
Signed-off-by: Bing Zhao <bzhao@marvell.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
12 years agoMerge branch 'for-linville' of git://git.kernel.org/pub/scm/linux/kernel/git/luca...
John W. Linville [Fri, 22 Jun 2012 18:41:57 +0000 (14:41 -0400)]
Merge branch 'for-linville' of git://git./linux/kernel/git/luca/wl12xx

12 years agoMerge branch 'for-john' of git://git.kernel.org/pub/scm/linux/kernel/git/iwlwifi...
John W. Linville [Fri, 22 Jun 2012 18:40:38 +0000 (14:40 -0400)]
Merge branch 'for-john' of git://git./linux/kernel/git/iwlwifi/iwlwifi-next

12 years agoMerge branch 'for-john' of git://git.sipsolutions.net/mac80211-next
John W. Linville [Fri, 22 Jun 2012 18:39:53 +0000 (14:39 -0400)]
Merge branch 'for-john' of git://git.sipsolutions.net/mac80211-next