Felix Fietkau [Mon, 1 Aug 2016 08:07:25 +0000 (10:07 +0200)]
build: fix tabs vs whitespace issue
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Gonzalez [Thu, 28 Jul 2016 20:33:26 +0000 (22:33 +0200)]
brcm63xx: fix CT-536p/CT-5621T support
Fix support for the Comtrend CT-536+, CT-5361 and CT-5621T routers support.
Currently the firmware is broken for these routers, because there is a missing
bar in the code at the DTS file avoiding to match with DTS stuff at the kernel. This
causes the router boots without ethernet connectivity. The status led also has a typo.
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Felix Fietkau [Sun, 31 Jul 2016 18:43:03 +0000 (20:43 +0200)]
kernel: silence a false positive uninitialized variable warning
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jonas Gorski [Thu, 28 Jul 2016 16:08:35 +0000 (18:08 +0200)]
ipq806x: fix boot hang if cmdline contains words with r in the middle
The ATB DTB mangle code will enter an infinite loop if it encounters a
word in the command line that contains an r in the middle of the word.
Fix this by increasing ptr everytime before invoking strchr, ot avoid
finding the same r again.
This fixes booting at least on Netgear R7500v1, which contains
"ubi.mtd=rootfs" in its commandline, triggering the misbehaviour.
Fixes: 0ddcbee26151 ("ipq806x: activate ATAG DTB mangle and EA8500 rootblock in dts")
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Felix Fietkau [Sun, 31 Jul 2016 18:30:08 +0000 (20:30 +0200)]
mvebu: fix NAND flash issues (FS#67)
Remove the previous PIO delay patch and add a revert patch for a faulty
upstream commit, which seems to have introduced this issue in the first
place
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 31 Jul 2016 17:27:15 +0000 (19:27 +0200)]
imx6: clean up / fix ventana image build code
Fix ubifs mkfs options
Use standard Build/* commands instead of doing everything in the hackish
ubi-boot-overlay template
Fix bootfs.tar.gz build error
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 31 Jul 2016 17:25:32 +0000 (19:25 +0200)]
build: add template for installing device .dtb files
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 31 Jul 2016 16:34:31 +0000 (18:34 +0200)]
imx6: use ubinize-image.sh to fix build with per-device rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hauke Mehrtens [Sun, 31 Jul 2016 10:41:10 +0000 (12:41 +0200)]
build: do not depend on svn any more
LEDE does not need svn to build any more, remove the prerequisite check.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Sun, 31 Jul 2016 11:17:44 +0000 (13:17 +0200)]
brcm63xx: fix build with per-device rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 31 Jul 2016 11:05:11 +0000 (13:05 +0200)]
ipq806x: add missing sysupgrade-nand => sysupgrade-tar change
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 31 Jul 2016 10:38:01 +0000 (12:38 +0200)]
image: fix build issue with per-device rootfs and legacy devices
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 31 Jul 2016 10:15:07 +0000 (12:15 +0200)]
perf: prevent build from within the sdk and mark as nonshared
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 31 Jul 2016 10:14:38 +0000 (12:14 +0200)]
sdk: provide a config symbol for detecting builds within the SDK
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 12:19:11 +0000 (14:19 +0200)]
image: add a helper variable for getting kernel/rootfs from within image Build/* templates
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 10:53:02 +0000 (12:53 +0200)]
kernel: remove hostap driver
It has been marked as broken for well over a month now and nobody has
complained.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 12:07:47 +0000 (14:07 +0200)]
octeon: increase block2mtd rootfs probe timeout on ER
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 12:01:47 +0000 (14:01 +0200)]
image.mk: add CMDLINE to DEVICE_VARS
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 11:48:00 +0000 (13:48 +0200)]
octeon: pad squashfs sysupgrade image rootfs
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 11:47:36 +0000 (13:47 +0200)]
image: add support for overriding kernel/rootfs images in sysupgrade-tar template
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 11:45:07 +0000 (13:45 +0200)]
octeon: drop unsupported jffs2 feature flag
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 10:36:33 +0000 (12:36 +0200)]
octeon: fix sysupgrade images
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 30 Jul 2016 10:18:08 +0000 (12:18 +0200)]
kernel: fix crashlog regression on x86
Check memblock regions for sufficient size before attempting to use
them. Allow checks for multiple memblock regions until a suitable one is
found.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 20:47:46 +0000 (22:47 +0200)]
include/cmake.mk: fix host builds
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 18:58:14 +0000 (20:58 +0200)]
dnsmasq: drop --interface and --except-interface options when the interface cannot be found
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Luke McKee [Sat, 23 Jul 2016 19:00:24 +0000 (02:00 +0700)]
cmake: include/cmake.mk add CMAKE_BINARY_SUBDIR to allow out of source tree builds
Some packages need out of source tree building with cmake, for example
when building kernel modules.
See an example here:
https://sourceforge.net/p/accel-ppp/code/ci/master/tree/README
Signed-off-by: Luke McKee <hojuruku@gmail.com>
Signed-off-by: Felix Fietkau <nbd@nbd.name> [cleanup, rework]
Felix Fietkau [Fri, 29 Jul 2016 17:51:31 +0000 (19:51 +0200)]
netifd: update to the latest version, adds an event handling fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 17:48:12 +0000 (19:48 +0200)]
dnsmasq: remove use of uci state for getting network ifname
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 15:13:48 +0000 (17:13 +0200)]
image.mk: remove leftover variable from a previous rework
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jo-Philipp Wich [Fri, 29 Jul 2016 14:47:45 +0000 (16:47 +0200)]
ath25: rework image building
* Remove legacy macros
* Emit generic LZMA and Gzip kernel images from the combined device recipe
* Rename combined device to generic
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Fri, 29 Jul 2016 13:05:51 +0000 (15:05 +0200)]
build: rename sysupgrade-nand to sysupgrade-tar
Now that the "sysupgrade-nand" step is used by non-NAND targets as well,
rename it to "sysupgrade-tar" to make it more generic.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Fri, 29 Jul 2016 13:03:19 +0000 (15:03 +0200)]
octeon: clean up image build code
Use the generic "sysupgrade-nand" build step to pack the sysupgrade file,
it performs the same steps as the inline "tar-file" macro.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Felix Fietkau [Fri, 29 Jul 2016 12:56:35 +0000 (14:56 +0200)]
dnsmasq: replace the iface hotplug script with a procd trigger
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 12:26:55 +0000 (14:26 +0200)]
dnsmasq: make the check for existing DHCP servers more reliable
If there is no carrier yet, wait for 2 seconds (STP forwarding delay)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Ulrich Weber [Mon, 13 Jun 2016 13:21:47 +0000 (15:21 +0200)]
dnsmasq: write atomic config file
multiple invocation of dnsmasq script (e.g. by procd and hotplugd)
might cause procd to restart dnsmasq with an incomplete config file.
Config file generation might take quite a long time on larger configs
due ubus calls for each listening interface...
Signed-off-by: Ulrich Weber <ulrich.weber@riverbed.com>
Felix Fietkau [Fri, 29 Jul 2016 14:17:40 +0000 (16:17 +0200)]
netifd: update to the latest version
Emits an initial event after the first link-up of a force_link
interface. This is needed for making the dnsmasq dhcp check more
reliable
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 12:19:17 +0000 (14:19 +0200)]
procd: add default timeout for reload trigger actions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 11:07:08 +0000 (13:07 +0200)]
igmpproxy: remove procd_open_trigger/procd_close_trigger calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 11:04:13 +0000 (13:04 +0200)]
dropbear: remove procd_open_trigger/procd_close_trigger calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 11:03:57 +0000 (13:03 +0200)]
sysntpd: remove procd_open_trigger/procd_close_trigger calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 11:00:56 +0000 (13:00 +0200)]
procd: rework trigger handling
Open/close triggers array around service_triggers call to make using
multiple triggers easier to deal with.
The API was quite confusing, because some functions contained implicit
trigger open/close calls and some didn't.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 12:07:09 +0000 (14:07 +0200)]
procd: update to the latest version
Fixes a long standing design issue in handling of delayed triggers
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 29 Jul 2016 12:06:08 +0000 (14:06 +0200)]
libubox: update to the latest version, adds a few utility functions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 22 Jul 2016 12:29:32 +0000 (14:29 +0200)]
build: add option to enable all profiles
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 22 Jul 2016 12:27:52 +0000 (14:27 +0200)]
build: add support for per-device rootfs based on device profile packges
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 22 Jul 2016 12:04:16 +0000 (14:04 +0200)]
build: minor cleanup of redundant code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 22 Jul 2016 11:04:11 +0000 (13:04 +0200)]
build: set TMPDIR for opkg calls
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 22 Jul 2016 10:43:54 +0000 (12:43 +0200)]
build: add target_params variable for getting root filesystem image parameters
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 22 Jul 2016 10:22:16 +0000 (12:22 +0200)]
build: add template for getting opkg package files from package names
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 22 Jul 2016 10:10:17 +0000 (12:10 +0200)]
build: rework opkg command invocation
Drop included $(XARGS), add support for passing target dir via parameter
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 22 Jul 2016 10:04:33 +0000 (12:04 +0200)]
build: remove obsolete variables from opkg command
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 22 Jul 2016 09:54:58 +0000 (11:54 +0200)]
build: rework prepare_rootfs to pass target dir via parameter
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Fri, 22 Jul 2016 08:53:12 +0000 (10:53 +0200)]
image: add wrapper variable to get the target dir for mkfs commands
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 21 Jul 2016 23:17:35 +0000 (01:17 +0200)]
image: make mkfs template output to $@
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 21 Jul 2016 16:49:54 +0000 (18:49 +0200)]
build: move rootfs processing code to include/rootfs.mk so it can be reused later
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 28 Jul 2016 17:30:03 +0000 (19:30 +0200)]
apm821xx: only attempt to mount /boot on MyBook Live
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hauke Mehrtens [Wed, 27 Jul 2016 19:27:54 +0000 (21:27 +0200)]
lantiq: fix switch configuration for EASY80920
The device tree description misses some Ethernet ports and there was no
model specified for this board. In addition there was no switch
specific default configuration created.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Thu, 28 Jul 2016 09:59:48 +0000 (11:59 +0200)]
kernel: fix crashlog issues on various architectures
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 28 Jul 2016 18:52:55 +0000 (20:52 +0200)]
lantiq: fix WBMR-300HPD switch port assignment
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jo-Philipp Wich [Thu, 28 Jul 2016 17:21:44 +0000 (19:21 +0200)]
octeon: fix image build
After
b47f438 "build: remove image prefix from kernel files in KDIR", the
kernel image in $(KDIR) has a different name and could not be found by the
tar-file build step anymore, leading to the following error on the build
servers:
cp: cannot stat `.../linux-octeon/lede-octeon-generic-kernel.bin': No such file or directory
make[4]: *** [.../linux-octeon/tmp/lede-octeon-generic-ext4-sysupgrade.tar] Error 1
Adjust the path to the source kernel image in order to fix the problem.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Matthias Schiffer [Thu, 28 Jul 2016 13:59:04 +0000 (15:59 +0200)]
ar71xx: don't use D-Link DIR-505 status LED as ethernet indicator
The stock firmware uses the single LED as status indicator only. Using the
same LED both for status and as ethernet indicator is uncommon, and has
been confusing users who were using the device as a WLAN mesh node (so the
LED was just off, as no ethernet was connected).
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Matthias Schiffer [Thu, 28 Jul 2016 13:43:25 +0000 (15:43 +0200)]
ar71xx: add revision detection for D-Link DIR-505 A1/A2
The A1 image also works on the A2, correctly set AR71XX_MODEL in this case.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Álvaro Fernández Rojas [Wed, 27 Jul 2016 10:08:50 +0000 (12:08 +0200)]
brcmfmac43430-firmware: update to v7.45.41.26
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Rafał Miłecki [Thu, 28 Jul 2016 12:04:58 +0000 (14:04 +0200)]
bcm53xx: enable kernel symbols/drivers needed for BCM53573
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Thu, 28 Jul 2016 10:43:42 +0000 (12:43 +0200)]
bcm53xx: backport DTS patches for USB 2.0 and Tenda AC9
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Rafał Miłecki [Thu, 28 Jul 2016 10:44:17 +0000 (12:44 +0200)]
bcm53xx: refresh kernel patches
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
John Crispin [Sun, 24 Jul 2016 09:17:34 +0000 (11:17 +0200)]
ar71xx: add a missing ;; to ar71xx.sh
commit
42305ae24aa7 ("ar71xx: add support for gl-mifi")
was missing a ;; breaking boot up
Signed-off-by: John Crispin <john@phrozen.org>
Merlijn Wajer [Wed, 20 Jul 2016 15:23:52 +0000 (17:23 +0200)]
netifd: Use -x hostname:$hostname instead of -H
Passing the hostname is currently broken in since the shipped busybox includes this commit:
https://git.busybox.net/busybox/commit/networking/udhcp/dhcpc.c?id=
2017d48c0d70bef8768efb42909e605ea8eb5a21
Before:
Sun Jan 31 18:11:32 2016 daemon.notice netifd: Interface 'wan' is now down
Sun Jan 31 18:11:32 2016 daemon.notice netifd: Interface 'wan' is setting up now
Sun Jan 31 18:11:32 2016 daemon.notice netifd: wan (18158): udhcpc: option -h NAME is deprecated, use -x hostname:NAME
Sun Jan 31 18:11:32 2016 daemon.notice netifd: wan (18158): udhcpc: malformed hex string 'WR150'
After:
Sun Jan 31 18:11:33 2016 daemon.notice netifd: wan (18169): udhcpc (v1.23.2) started
Sun Jan 31 18:11:33 2016 daemon.notice netifd: wan (18169): Sending discover...
Sun Jan 31 18:11:33 2016 daemon.notice netifd: wan (18169): Sending select for xxx.yyy.zzz.xyz...
Sun Jan 31 18:11:33 2016 daemon.notice netifd: wan (18169): Lease of xxx.yyy.zzz.xyz obtained, lease time 600
Signed-off-by: Merlijn Wajer <merlijn@wizzup.org>
Conn O'Griofa [Wed, 27 Jul 2016 18:04:06 +0000 (19:04 +0100)]
base-files: sysupgrade: fix pseudobridge upgrades
Treat 'relayd' as an essential service to avoid connection interruptions during sysupgrade on devices configured as a pseudobridge.
Signed-off-by: Conn O'Griofa <connogriofa@gmail.com>
Rafał Miłecki [Wed, 27 Jul 2016 12:15:32 +0000 (14:15 +0200)]
b53: allow ports with higher numbers than CPU port
Our code was assuming CPU port uses the highest number. My BCM53573
device has eth0 connected to port 8 and eth1 connected to port 5. While
working on support for it I tried to:
1) Enable all ports (including port 8)
2) Set CPU port to 5
I noticed port 8 is not accessible anymore. It was just a development
process but it seems like something worth fixing anyway.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Acked-by: Jonas Gorski <jonas.gorski@gmail.com>
dani [Fri, 22 Jul 2016 10:45:54 +0000 (12:45 +0200)]
brcm63xx: fix HG556a C button
One button of the HG556a-C has the wrong GPIO pin defined in the dts file,
fix it
Signed-off-by: Daniel Gonzalez <dgcbueu@gmail.com>
John Crispin [Sun, 24 Jul 2016 04:25:47 +0000 (06:25 +0200)]
mountd: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
John Crispin [Sun, 24 Jul 2016 04:23:26 +0000 (06:23 +0200)]
firewall3: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
John Crispin [Sun, 24 Jul 2016 04:14:38 +0000 (06:14 +0200)]
ugps: update to latest git HEAD
Signed-off-by: John Crispin <john@phrozen.org>
P.Wassi [Tue, 26 Jul 2016 17:18:53 +0000 (19:18 +0200)]
ramips: unify etc/board.d/01_leds configuration
Introduce an optional parameter at the local set_usb_led and
set_wifi_led function such that they can take a triggering
device. If no parameter is passed, behaviour is unchanged.
Signed-off-by: P.Wassi <p.wassi@gmx.at>
Zhao Gang [Tue, 19 Jul 2016 02:54:11 +0000 (02:54 +0000)]
ar71xx: add support for gl-mifi
This add initial support for gl-mifi.
Product page: http://www.gl-inet.com/mifi/
Signed-off-by: Zhao Gang <gang.zhao.42@gmail.com>
Michael Lee [Wed, 20 Apr 2016 06:01:21 +0000 (14:01 +0800)]
ramips: dch-m225 don't have ethernet. default enable wifi
Signed-off-by: Michael Lee <igvtee@gmail.com>
Paul Wassi [Sat, 23 Jul 2016 14:25:38 +0000 (16:25 +0200)]
ramips: remove indentation in etc/board.d/01_leds
Remove indentation at end of line in base-files/etc/board.d/01_leds
Signed-off-by: Paul Wassi <p.wassi@gmx.at>
John Crispin [Thu, 21 Jul 2016 21:34:25 +0000 (23:34 +0200)]
ramips: add missing i2s alias
Signed-off-by: John Crispin <john@phrozen.org>
Matthias Schiffer [Wed, 27 Jul 2016 14:44:16 +0000 (16:44 +0200)]
ar71xx: clean up legacy-devices.mk
Several legacy images were not buildable because of missing profile
definitions in legacy-devices.mk since MultiProfile was removed. Update
legacy-devices.mk to provide all necessary profiles, and change ordering
to match legacy.mk.
Signed-off-by: Matthias Schiffer <mschiffer@universe-factory.net>
Alexey Brodkin [Wed, 27 Jul 2016 12:51:32 +0000 (15:51 +0300)]
toolchain/gcc/arc-2016.03: Fix building on hosts with gcc 6.x
On attempt to build ARC toolchain on the host with gcc 6.1 I saw the
same failure as described in https://gcc.gnu.org/bugzilla/show_bug.cgi?id=69959
This change adds a back-port of the fix from upstream gcc, see
https://gcc.gnu.org/viewcvs/gcc?view=revision&revision=233572
Note the fix is already a part of gcc-5.4 and gcc-6.1 so no need for
the same fix for others.
Signed-off-by: Alexey Brodkin <abrodkin@synopsys.com>
Felix Fietkau [Tue, 26 Jul 2016 11:47:00 +0000 (13:47 +0200)]
hostapd: backport mesh/ibss HT20/HT40 related fix
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Golle [Thu, 21 Jul 2016 10:13:50 +0000 (12:13 +0200)]
fstools: update to latest HEAD
Fixes duplicate ubiblock entries being listed and improves
find_mount_point to also match against a block device's
major:minor numbers (needed e.g. for /dev/root).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Etienne CHAMPETIER [Wed, 20 Jul 2016 12:22:44 +0000 (12:22 +0000)]
base-files: use procd init for urandom_seed
Previous implementation was blocking the init and
breaking halt/reboot/sysupgrade (reported by Daniel Golle)
v2: use procd logging, use set -e + trap for error handling
Signed-off-by: Etienne CHAMPETIER <champetier.etienne@gmail.com>
Tested-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Tue, 26 Jul 2016 06:36:45 +0000 (08:36 +0200)]
mvebu: limit image builds to profile selection
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 26 Jul 2016 06:14:14 +0000 (08:14 +0200)]
base-files: remove support of profile-specific base-files
It is incompatible with multi-profile builds and has not been used
in-tree anyway.
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 26 Jul 2016 06:25:51 +0000 (08:25 +0200)]
ath9k: fix warning in client mode (GH#195)
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 21 Jul 2016 15:49:19 +0000 (17:49 +0200)]
build: remove image prefix from kernel files in KDIR
This allows the image builder to change EXTRA_IMAGE_NAME at a later
point in time without breaking the build
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 21 Jul 2016 17:02:59 +0000 (19:02 +0200)]
build: remove cpio.gz and tar.gz from regular filesystem types
They are not used to produce regular firmware images anyway. Instead,
call their build templates directly if enabled in the config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 25 Jul 2016 10:37:01 +0000 (12:37 +0200)]
image: remove shell calls from legacy ubi/ubifs image code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 25 Jul 2016 10:30:13 +0000 (12:30 +0200)]
kirkwood: fix UBIFS_OPTS variable in image build
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Stefan Weil [Mon, 3 Aug 2009 08:54:04 +0000 (10:54 +0200)]
Remove existing old link before creating a new one
This is needed after a kernel update, otherwise the
new link is written as linux/linux-$(LINUX_VERSION).
Signed-off-by: Stefan Weil <sw@weilnetz.de>
Christian Lamparter [Sat, 23 Jul 2016 12:20:53 +0000 (14:20 +0200)]
apm821xx: fix atheros PCIe cards on the MR24
The consolidation of the MR24 and WNDR4700 subtargets
into the nand subtarget broke MR24's atheros wlan.
This was because the wndr4700's board code used a
pci_fixup routines to supply the ath9k module with
the calibration data.
This is not necessary on the MR24 as it has standard
mini-pcie ports. Hence the two AR9380 mini-pcie cards
do not need any calibration data overrides.
Cc: chrisrblake93@gmail.com
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Christian Lamparter [Sat, 23 Jul 2016 12:20:52 +0000 (14:20 +0200)]
apm821xx: use lzma compression for the initramfs images
The MR24's u-boot takes it sweet time decompressing the
LZMA-packed initramfs image. A user reported that
compared to the old gzip method in v2: it "takes a ton
longer to decompress like 4\x the old boot time for
decompression".
This patch also fixes a issue with the WNDR4700's initramfs
image getting to big and causing the following u-boot crash
during the decompression:
"Uncompressing Multi-File Image ... Error: inflate() returned -5
out-of-mem or overwrite error - must RESET board to recover"
This patch fixes both issues by reverting the MR24's initramfs
compression method back to gzip. And choosing to compress the
initramfs within the initramfs image as LZMA by default.
Cc: chrisrblake93@gmail.com
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Felix Fietkau [Sun, 24 Jul 2016 14:45:22 +0000 (16:45 +0200)]
ath9k: remove intermediate queueing patch until it is fixed properly
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Hauke Mehrtens [Sun, 24 Jul 2016 11:42:44 +0000 (13:42 +0200)]
iperf3: update to version 3.1.3
old size:
iperf3_3.0.11-1_mips_34kc_dsp.ipk 30147
new size:
iperf3_3.1.3-1_mips_34kc_dsp.ipk 33640
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 24 Jul 2016 11:42:30 +0000 (13:42 +0200)]
iperf: update to version 2.0.9
old size:
iperf_2.0.8-1_mips_34kc_dsp.ipk 27911
new size:
iperf_2.0.9-1_mips_34kc_dsp.ipk 28681
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 24 Jul 2016 11:26:46 +0000 (13:26 +0200)]
cyassl: update to wolfssl version 3.9.6
Changelog: https://www.wolfssl.com/wolfSSL/Docs-wolfssl-changelog.html
old size:
libcyassl_3.9.0-1_mips_34kc_dsp.ipk 147552
new size:
libcyassl_3.9.6-1_mips_34kc_dsp.ipk 150087
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 24 Jul 2016 11:23:02 +0000 (13:23 +0200)]
curl: update to version 7.50.0
Changelog: https://curl.haxx.se/changes.html
old sizes:
libcurl_7.49.0-1_mips_34kc_dsp.ipk 97569
curl_7.49.0-1_mips_34kc_dsp.ipk 37925
new sizes:
libcurl_7.50.0-1_mips_34kc_dsp.ipk 97578
curl_7.50.0-1_mips_34kc_dsp.ipk 38017
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Felix Fietkau [Sun, 24 Jul 2016 12:43:42 +0000 (14:43 +0200)]
openssl: re-enable NPN by default
Several packages rely on it
Signed-off-by: Felix Fietkau <nbd@nbd.name>
projects / openwrt / staging / chunkeey.git / log