MIPS: MSP71xx: Remove dead CONFIG_MTD_PMC_MSP_RAMROOT

CONFIG_MTD_PMC_MSP_RAMROOT doesn't exist in Kconfig, therefore removing all
references for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
To:     Ralf Baechle <ralf@linux-mips.org>,
        Yoichi Yuasa <yuasa@linux-mips.org>, linux-mips@linux-mips.org,
        linux-kernel@vger.kernel.org
Cc: vamos@i4.informatik.uni-erlangen.de
Acked-by: Shane McDonald <mcdonald.shane@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1375/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: PowerTV: Removing dead CONFIG_DIAGNOSTICS

CONFIG_DIAGNOSTICS doesn't exist in Kconfig, therefore removing all
references for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
To: David VomLehn <dvomlehn@cisco.com>
To: Yoichi Yuasa <yuasa@linux-mips.org>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Cc: vamos@i4.informatik.uni-erlangen.de
Patchwork: https://patchwork.linux-mips.org/patch/1374/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: PNX Removing dead CONFIG_PMCTWILED

CONFIG_PMCTWILED doesn't exist in Kconfig, therefore removing all
references for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Cc: vamos@i4.informatik.uni-erlangen.de
Acked-by: Shane McDonald <mcdonald.shane@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1373/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Remove dead CONFIG_MTD_PB1550_BOOT, CONFIG_MTD_PB1550_USER

CONFIG_MTD_PB1550_BOOT, CONFIG_MTD_PB1550_USER doesn't exist in
Kconfig, therefore removing all references for it from the source
code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
To: Manuel Lauss <manuel.lauss@gmail.com>,
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Cc: vamos@i4.informatik.uni-erlangen.de
Patchwork: https://patchwork.linux-mips.org/patch/1370/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Cavium: Remove dead CONFIG_GDB_CONSOLE

CONFIG_GDB_CONSOLE doesn't exist in Kconfig, therefore removing all
references for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
To: David Daney <ddaney@caviumnetworks.com>
To: Yang Shi <yang.shi@windriver.com>
To: Herbert Xu <herbert@gondor.apana.org.au>
To: Tejun Heo <tj@kernel.org>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Cc: vamos@i4.informatik.uni-erlangen.de
Patchwork: https://patchwork.linux-mips.org/patch/1368/
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Alchemy: Remove dead CONFIG_SOC_AU1000_FREQUENCY

CONFIG_SOC_AU1000_FREQUENCY doesn't exist in Kconfig, therefore
removing all references for it from the source code.

Signed-off-by: Christoph Egger <siccegge@cs.fau.de>
To: linux-mips@linux-mips.org
To: linux-kernel@vger.kernel.org
Cc: vamos@i4.informatik.uni-erlangen.de
Patchwork: https://patchwork.linux-mips.org/patch/1367/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Provide more elevant interface cu2_notifier for CP2 extensions.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Patchwork: https://patchwork.linux-mips.org/patch/1504/

MIPS: Remove unnecessary header file inclusion from fault.c.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

printk: fix delayed messages from CPU hotplug events

When a secondary CPU is being brought up, it is not uncommon for
printk() to be invoked when cpu_online(smp_processor_id()) == 0.  The
case that I witnessed personally was on MIPS:

http://lkml.org/lkml/2010/5/30/4

If (can_use_console() == 0), printk() will spool its output to log_buf
and it will be visible in "dmesg", but that output will NOT be echoed to
the console until somebody calls release_console_sem() from a CPU that
is online.  Therefore, the boot time messages from the new CPU can get
stuck in "limbo" for a long time, and might suddenly appear on the
screen when a completely unrelated event (e.g. "eth0: link is down")
occurs.

This patch modifies the console code so that any pending messages are
automatically flushed out to the console whenever a CPU hotplug
operation completes successfully or aborts.

The issue was seen on 2.6.34.

Original patch by Kevin Cernekee with cleanups by akpm and additional fixes
by Santosh Shilimkar.  This patch superseeds
https://patchwork.linux-mips.org/patch/1357/.

Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
To: <mingo@elte.hu>
To: <akpm@linux-foundation.org>
To: <simon.kagstrom@netinsight.net>
To: <David.Woodhouse@intel.com>
To: <lethal@linux-sh.org>
Cc: <linux-kernel@vger.kernel.org>
Cc: <linux-mips@linux-mips.org>
Reviewed-by: Paul Mundt <lethal@linux-sh.org>
Signed-off-by: Kevin Cernekee <cernekee@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1534/
LKML-Reference: <ede63b5a20af951c755736f035d1e787772d7c28@localhost>
LKML-Reference: <EAF47CD23C76F840A9E7FCE10091EFAB02C5DB6D1F@dbde02.ent.ti.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Clean up arch/mips/Makefile

- Drop CLEAN_FILES assignments that is no longer required
- Add $(Q) in a few rules

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
To: linux-mips <linux-mips@linux-mips.org>
To: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1305/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Refactor arch/mips/boot/compressed/Makefile

- use hostprogs-y for the elf2ecoff
- list all *.o file in targets
- renamed obj-y to vmlinuzobjs-y (it was confusing to re-use a kbuild variable)
- fix all uses of if_changed/cmd
- use kbuild rules to beautify output
- update clean-file to clean vmlinuz.* in top-level directory

- simplied logic in arch/mips/Makefile for compressed targets

The net result is a more kbuild conformant Makefile but
readability did not increase.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
To: linux-mips <linux-mips@linux-mips.org>
To: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1304/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Refactor arch/mips/boot/Makefile

- remove stuff that is not needed
  VMLINUX assignment, all: rule
- use hostprogs-y for the host program
- use kbuild rules for the three targets - to beautify output
- drop clean-files - it is no longer needed
- simplify arch/mips/Makefile when calling targets in boot/Makefile

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
To: linux-mips <linux-mips@linux-mips.org>
To: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1303/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: PNX8550: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: PNX833x: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: STB8550: Move boards over to obj-y

Preparatory cleanup for moving Alchemy over to new  MIPS Platform build
system support.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: STB22x: Move boards over to obj-y

Preparatory cleanup for moving Alchemy over to new  MIPS Platform build
system support.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: PNX8550: Move code one directory level up.

It was sharing the nxp directory but no code with pnx833x and will fit
better into the new platform makefile scheme, if moved.  Also after the
pnx833x code has been moved up, the pnx8550 Code was the last users of
the nxp dir.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: PNX833x: Move code one directory level up.

It was sharing the nxp directory but no code with pnx8550 and will fit
better into the new platform makefile scheme, if moved.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: EMMA: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: TXx9: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Sibyte: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Octeon: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: BCM63xx: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: BCM47xx: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Lasat: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: PowerTV: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: WRPPMC: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: WRPPMC: Move code one directory level up.

It was the last platform under gt64120 and will fit better into the new
platform makefile scheme, if moved.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: RB532: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: IP32: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Malta: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: IP22, IP28: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: SNI: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: DECstation: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Jazz: Migrate to new platform makefile style.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: PMC-Sierra: Move board Makefile parts to their own Platform file

Signed-off-by: Shane McDonald <mcdonald.shane@gmail.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1354/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Move VR41xx Makefile parts to their own Platform file

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/1322/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Move Cobalt Makefile parts to their own Platform file

Signed-off-by: Yoichi Yuasa <yuasa@linux-mips.org>
Cc: linux-mips <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/1321/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: IP27: Migrate to new Platform file

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Move Alchemy Makefile parts to their own Platform file.

[Ralf: Remove a forgotten -Werror in Pb1200 Makefile.]

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Cc: Sam Ravnborg <sam@ravnborg.org>
Cc: Manuel Lauss <manuel.lauss@googlemail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1319/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Alchemy: fix deprecated compile warnings

Replace deprecated DMA_32BIT_MASK with DMA_BIT_MASK.  This is needed because
the new style platform makefiles will enable -Werror.

cc1: warnings being treated as errors
arch/mips/alchemy/devboards/db1200/platform.c:219: error: 'DMA_nnBIT_MASK' is deprecated
arch/mips/alchemy/devboards/db1200/platform.c:226: error: 'DMA_nnBIT_MASK' is deprecated
arch/mips/alchemy/devboards/db1200/platform.c:388: error: 'DMA_nnBIT_MASK' is deprecated
arch/mips/alchemy/devboards/db1200/platform.c:393: error: 'DMA_nnBIT_MASK' is deprecated

Signed-off-by: FUJITA Tomonori <fujita.tomonori@lab.ntt.co.jp>
To: linux-mips@linux-mips.org
Acked-by: Manuel Lauss <manuel.lauss@googlemail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1427/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Alchemy: move boards over to obj-y

Preparatory step for moving Alchemy over to new  MIPS Platform
build system support.

Signed-off-by: Manuel Lauss <manuel.lauss@googlemail.com>
To: Linux-MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/1318/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: MIPSsim: Migrate to new Platform file

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Loongson: Migrate makefile to new Platform file

Signed-off-by: Wu Zhangjin <wuzhangjin@gmail.com>
To: linux-mips <linux-mips@linux-mips.org>
Cc: Alexander Clouter <alex@digriz.org.uk>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: Sam Ravnborg <sam@ravnborg.org>,
Patchwork: https://patchwork.linux-mips.org/patch/1313/
Patchwork: https://patchwork.linux-mips.org/patch/1326/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Introduce support for Platform definitions

Move platform specific definitions to the platfrom directories.

Each platform shall do the following:
1) include an entry in arch/mips/Kbuild.platforms
2) add relevant definitions to arch/mips/<platform>/Platform

This commits changes ar7 to the new scheme as an example.

Introducing a platform speecific Platfrom file has following advantages:
1) decentralization of platfrom definitions
2) simplification af arch/mips/Makefile
3) force all platfrom to build with -Werror (done in arch/mips/Kbuild)

[Ralf: Remove forgotten -Werror from AR7 Makefile]

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
To: linux-mips <linux-mips@linux-mips.org>
To: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1302/
Patchwork: http://patchwork.linux-mips.org/patch/1308/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Add -Werror to arch/mips/Kbuild

Adding subdirs-ccflags-y := -Werror to arch/mips/Kbuild
let us in one go cover all files with -Werror.

In addition this allows us to remove the
individual -Werror definition in various Makefile.

Adding the definition to Kbuild as a recursive
option help us not to forget to do so.

With this change we now compile arch/mips/kernel/cpufreq with -Werror

One drawback:
When specifying a subdirectory covered by the Kbuild file like this:

    make arch/mips/kernel/

then kbuild fails to pick up the -Werror definition.

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
To: linux-mips <linux-mips@linux-mips.org>
To: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1301/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Introduce arch/mips/Kbuild

Signed-off-by: Sam Ravnborg <sam@ravnborg.org>
To: linux-mips <linux-mips@linux-mips.org>
To: Wu Zhangjin <wuzhangjin@gmail.com>
Patchwork: https://patchwork.linux-mips.org/patch/1300/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: IP27: klconfig.c checkpatch cleanup

arch/mips/sgi-ip27/ip27-klconfig.c:51: ERROR: "foo * bar" should be "foo *bar"
arch/mips/sgi-ip27/ip27-klconfig.c:63: ERROR: "foo * bar" should be "foo *bar"
arch/mips/sgi-ip27/ip27-klconfig.c:81: ERROR: "foo * bar" should be "foo *bar"
arch/mips/sgi-ip27/ip27-klconfig.c:100: ERROR: "foo * bar" should be "foo *bar"

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1278/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: PCI: RM9000 checkpatch cleanup

arch/mips/pci/ops-titan-ht.c:36: ERROR: "foo * bar" should be "foo *bar"
arch/mips/pci/ops-titan-ht.c:68: ERROR: "foo * bar" should be "foo *bar"

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: Tejun Heo <tj@kernel.org>
Cc: Christoph Lameter <cl@linux-foundation.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1277/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: math-emu: Checkpatch cleanup

arch/mips/math-emu/sp_tlong.c:75: ERROR: else should follow close brace '}'

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1276/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: math-emu: Checkpatch cleanup

arch/mips/math-emu/sp_tint.c:76: ERROR: else should follow close brace '}'

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1275/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: math-emu: Checkpatch cleanup

arch/mips/math-emu/sp_modf.c:32: ERROR: "foo * bar" should be "foo *bar"

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1273/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: math-emu: Checkpatch cleanup

arch/mips/math-emu/dp_tlong.c:75: ERROR: else should follow close brace '}'

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1272/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: math-emu: Checkpatch cleanup

arch/mips/math-emu/dp_tint.c:73: ERROR: else should follow close brace '}'

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1271/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: math-emu: Checkpatch cleanup

arch/mips/math-emu/dp_modf.c:32: ERROR: "foo * bar" should be "foo *bar"

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1269/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: DECstation: Checkpatch cleanup

arch/mips/dec/promcon.c:37: ERROR: that open brace { should be on the previous line

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1270/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Yosemite: ht-irq.c: Checkpatch cleanup

arch/mips/pmc-sierra/yosemite/ht-irq.c:38: ERROR: code indent should use tabs where possible
arch/mips/pmc-sierra/yosemite/ht-irq.c:39: ERROR: code indent should use tabs where possible
arch/mips/pmc-sierra/yosemite/ht-irq.c:40: ERROR: code indent should use tabs where possible
arch/mips/pmc-sierra/yosemite/ht-irq.c:43: ERROR: code indent should use tabs where possible
arch/mips/pmc-sierra/yosemite/ht-irq.c:44: ERROR: code indent should use tabs where possible
arch/mips/pmc-sierra/yosemite/ht-irq.c:45: ERROR: code indent should use tabs where possible

Signed-off-by: Andrea Gelmini <andrea.gelmini@gelma.net>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1268/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: PowerTV: Correct ASIC device register names and locations

Correct ASIC device register names and addresses for USB devices.

Signed-off-by: David VomLehn <dvomlehn@cisco.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1258/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: PowerTV: Use O(1) algorthm for phys_to_dma/dma_to_phys

Replace phys_to_dma()/dma_to_phys() looping algorithm with an O(1) algorithm
The approach taken is inspired by the sparse memory implementation: take a
certain number of high-order bits off the address them, use this as an
index into a table containing an offset to the desired address and add
it to the original value. There is a table for mapping physical addresses
to DMA addresses and another one for the reverse mapping. The table sizes
depend on how fine-grained the mappings need to be; Coarser granularity
less to smaller tables.  On a processor with 32-bit physical and DMA
addresses, with 4 MIB granularity, memory usage is two 2048-byte arrays.
Each 32-byte cache line thus covers 64 MiB of address space.

Also, renames phys_to_bus() to phys_to_dma() and bus_to_phys() to
dma_to_phys() to align with kernel usage.

[Ralf: Fixed silly build breakage due to stackoverflow warning caused by
huge array on stack.]

Signed-off-by: David VomLehn <dvomlehn@cisco.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1257/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: MTX1: Fix build.

  CC      arch/mips/alchemy/mtx-1/board_setup.o
{standard input}: Assembler messages:
{standard input}:263: Error: opcode not supported on this processor: mips1 (mips1) `sync'
{standard input}:274: Error: opcode not supported on this processor: mips1 (mips1) `sync'
{standard input}:296: Error: opcode not supported on this processor: mips1 (mips1) `sync'
[...]

Any .set mipsX statement other than .set mips0 at the end of inline
assembler is a big fat bug.

Introduced by 9482eabeca315c0276ffb50026b7482481b7097b (linux-mips.org) rsp.
32fd6901a6d8d19f94e4de6be4e4b552ab078620 (kernel.org).

While at it, fix the same issue in

  arch/mips/alchemy/devboards/pb1000/board_setup.c
  arch/mips/alchemy/xxs1500/board_setup.c

as well.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: BCM47xx: Activate SSB_B43_PCI_BRIDGE by default

B43_pci_bridge is needed to use the b43 driver with brcm47xx.  Activate it
by default if PCI is available.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1510/
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: BCM47xx: Really fix 128MB RAM problem

The previous patch 4a86f2d27733f610e642649aca3e82e86fca9e22 (lmo) rsp.
84a6fcb368a080620d12fc4d79e07902dbee7335 (kernel.org) was wrong.

The BCM47xx architecture maps the ram into a 128MB address space. It
will be spaced there as often as goes into the 128MB. Detection tries to
find the position where the same memory is found. When reading beyond
128MB the processor will throw an exception. If 128MB RAM is installed,
it will not find a memory alias because it tries to read beyond the 128MB
border. Now it just assumes 128MB installed ram if it can not find an
alias.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1508/
Acked-by: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Octeon: Workaround link failures with gcc-4.4.x 32-bits toolchains

When building with a gcc-4.4.x toolchain that is configured to produce
32-bits executables by default, we will produce __lshrti3 in sched_clock()
which is never resolved so the kernel fails to link. Unconditionally use
the inline assembly version as suggested by David Daney, which works around
the issue.

Signed-off-by: Florian Fainelli <florian@openwrt.org>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1514/
Acked-by: David Daney <ddaney@caviumnetworks.com>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: N32: Fix syscall number comments.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1515/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Don't overflow cevt-r4k.c calculations at high clock rates.

The 'mult' element of struct clock_event_device must never be wider
than 32-bits.  If it were, it would get truncated when used by
clockevent_delta2ns() when this calls do_div().

We can meet this requirement by using clockevent_set_clock() to set
the MULT and SHIFT values.

Signed-off-by: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1253/
Acked-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: IP27: Don't include <linux/topology.h> into <asm/sn/agent.h>.

The include is unecessary and will when building the IP35 result in
recursive header inclusion spaghetti.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: TX49xx: Define ARCH_KMALLOC_MINALIGN

With SLAB, it works without ARCH_KMALLOC_MINALIGN, but with SLOB/SLUB,
ARCH_KMALLOC_MINALIGN is required to ensure alignment of kmalloced
buffer.

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
To: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/1248/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

VIDEO: Correct use of request_region/request_mem_region

request_region should be used with release_region, not request_mem_region.

Geert Uytterhoeven pointed out that in the case of drivers/video/gbefb.c,
the problem is actually the other way around; request_mem_region should be
used instead of request_region.

The semantic patch that finds/fixes this problem is as follows:
(http://coccinelle.lip6.fr/)

// <smpl>
@r1@
expression start;
@@

request_region(start,...)

@b1@
expression r1.start;
@@

request_mem_region(start,...)

@depends on !b1@
expression r1.start;
expression E;
@@

- release_mem_region
+ release_region
  (start,E)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Linux 2.6.35

NFS: Fix a typo in include/linux/nfs_fs.h

nfs_commit_inode() needs to be defined irrespectively of whether or not
we are supporting NFSv3 and NFSv4.

Allow the compiler to optimise away code in the NFSv2-only case by
converting it into an inlined stub function.

Reported-and-tested-by: Ingo Molnar <mingo@elte.hu>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

Merge master.kernel.org:/home/rmk/linux-2.6-arm

* master.kernel.org:/home/rmk/linux-2.6-arm:
  cyber2000fb: fix console in truecolor modes
  cyber2000fb: fix machine hang on module load
  SA1111: Eliminate use after free
  ARM: Fix Versatile/Realview/VExpress MMC card detection sense
  ARM: 6279/1: highmem: fix SMP preemption bug in kmap_high_l1_vipt
  ARM: Add barriers to io{read,write}{8,16,32} accessors as well
  ARM: 6273/1: Add barriers to the I/O accessors if ARM_DMA_MEM_BUFFERABLE
  ARM: 6272/1: Convert L2x0 to use the IO relaxed operations
  ARM: 6271/1: Introduce *_relaxed() I/O accessors
  ARM: 6275/1: ux500: don't use writeb() in uncompress.h
  ARM: 6270/1: clean files in arch/arm/boot/compressed/
  ARM: Fix csum_partial_copy_from_user()

Merge branch 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6

* 'bugfixes' of git://git.linux-nfs.org/projects/trondmy/nfs-2.6:
  NFS: Ensure that writepage respects the nonblock flag
  NFS: kswapd must not block in nfs_release_page
  nfs: include space for the NUL in root path

Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/edid: Fix the HDTV hack sync adjustment
  drm/radeon/kms: fix radeon mid power profile reporting

mm: fix ia64 crash when gcore reads gate area

Debian's ia64 autobuilders have been seeing kernel freeze or reboot
when running the gdb testsuite (Debian bug 588574): dannf bisected to
2.6.32 62eede62dafb4a6633eae7ffbeb34c60dba5e7b1 "mm: ZERO_PAGE without
PTE_SPECIAL"; and reproduced it with gdb's gcore on a simple target.

I'd missed updating the gate_vma handling in __get_user_pages(): that
happens to use vm_normal_page() (nowadays failing on the zero page),
yet reported success even when it failed to get a page - boom when
access_process_vm() tried to copy that to its intermediate buffer.

Fix this, resisting cleanups: in particular, leave it for now reporting
success when not asked to get any pages - very probably safe to change,
but let's not risk it without testing exposure.

Why did ia64 crash with 16kB pages, but succeed with 64kB pages?
Because setup_gate() pads each 64kB of its gate area with zero pages.

Reported-by: Andreas Barth <aba@not.so.argh.org>
Bisected-by: dann frazier <dannf@debian.org>
Signed-off-by: Hugh Dickins <hughd@google.com>
Tested-by: dann frazier <dannf@dannf.org>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CIFS: Remove __exit mark from cifs_exit_dns_resolver()

Remove the __exit mark from cifs_exit_dns_resolver() as it's called by the
module init routine in case of error, and so may have been discarded during
linkage.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jeff Layton <jlayton@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

cyber2000fb: fix console in truecolor modes

Return value was not set to 0 in setcolreg() with truecolor modes. This causes
fb_set_cmap() to abort after first color, resulting in blank palette - and
blank console in 24bpp and 32bpp modes.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

cyber2000fb: fix machine hang on module load

I was testing two CyberPro 2000 based PCI cards on x86 and the machine always
hanged completely when the cyber2000fb module was loaded. It seems that the
card hangs when some registers are accessed too quickly after writing RAMDAC
control register. With this patch, both card work.

Add delay after RAMDAC control register write to prevent hangs on module load.

Signed-off-by: Ondrej Zary <linux@rainbow-software.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

SA1111: Eliminate use after free

__sa1111_remove always frees its argument, so the subsequent reference to
sachip->saved_state represents a use after free.  __sa1111_remove does not
appear to use the saved_state field, so the patch simply frees it first.

A simplified version of the semantic patch that finds this problem is as
follows: (http://coccinelle.lip6.fr/)

// <smpl>
@@
expression E,E2;
@@

__sa1111_remove(E)
...
(
  E = E2
|
* E
)
// </smpl>

Signed-off-by: Julia Lawall <julia@diku.dk>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

ARM: Fix Versatile/Realview/VExpress MMC card detection sense

The MMC card detection sense has become really confused with negations
at various levels, leading to some platforms not detecting inserted
cards.  Fix this by converting everything to positive logic throughout,
thereby getting rid of these negations.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

ARM: 6279/1: highmem: fix SMP preemption bug in kmap_high_l1_vipt

smp_processor_id() must not be called from a preemptible context (this
is checked by CONFIG_DEBUG_PREEMPT).  kmap_high_l1_vipt() was doing so.
This lead to a problem where the wrong per_cpu kmap_high_l1_vipt_depth
could be incremented, causing a BUG_ON(*depth <= 0); in
kunmap_high_l1_vipt().

The solution is to move the call to smp_processor_id() after the call
to preempt_disable().

Originally by: Andrew Howe <ahowe@nvidia.com>

Signed-off-by: Gary King <gking@nvidia.com>
Acked-by: Nicolas Pitre <nico.as.pitre@linaro.org>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

NFS: Ensure that writepage respects the nonblock flag

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

NFS: kswapd must not block in nfs_release_page

See https://bugzilla.kernel.org/show_bug.cgi?id=16056

If other processes are blocked waiting for kswapd to free up some memory so
that they can make progress, then we cannot allow kswapd to block on those
processes.

Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>
Cc: stable@kernel.org

nfs: include space for the NUL in root path

In root_nfs_name() it does the following:

        if (strlen(buf) + strlen(cp) > NFS_MAXPATHLEN) {
                printk(KERN_ERR "Root-NFS: Pathname for remote directory too long.\n");
                return -1;
        }
        sprintf(nfs_export_path, buf, cp);

In the original code if (strlen(buf) + strlen(cp) == NFS_MAXPATHLEN)
then the sprintf() would lead to an overflow.  Generally the rest of the
code assumes that the path can have NFS_MAXPATHLEN (1024) characters and
a NUL terminator so the fix is to add space to the nfs_export_path[]
buffer.

Signed-off-by: Dan Carpenter <error27@gmail.com>
Signed-off-by: Trond Myklebust <Trond.Myklebust@netapp.com>

Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] etr: fix clock synchronization race
  [S390] Fix IRQ tracing in case of PER

Merge git://git./linux/kernel/git/wim/linux-2.6-watchdog

* git://git.kernel.org/pub/scm/linux/kernel/git/wim/linux-2.6-watchdog:
  watchdog: update MAINTAINERS entry

Merge branch 'fix/hda' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'fix/hda' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ALSA: hda - Add a PC-beep workaround for ASUS P5-V
  ALSA: hda - Assume PC-beep as default for Realtek
  ALSA: hda - Don't register beep input device when no beep is available
  ALSA: hda - Fix pin-detection of Nvidia HDMI

CRED: Fix __task_cred()'s lockdep check and banner comment

Fix __task_cred()'s lockdep check by removing the following validation
condition:

lockdep_tasklist_lock_is_held()

as commit_creds() does not take the tasklist_lock, and nor do most of the
functions that call it, so this check is pointless and it can prevent
detection of the RCU lock not being held if the tasklist_lock is held.

Instead, add the following validation condition:

task->exit_state >= 0

to permit the access if the target task is dead and therefore unable to change
its own credentials.

Fix __task_cred()'s comment to:

 (1) discard the bit that says that the caller must prevent the target task
     from being deleted.  That shouldn't need saying.

 (2) Add a comment indicating the result of __task_cred() should not be passed
     directly to get_cred(), but rather than get_task_cred() should be used
     instead.

Also put a note into the documentation to enforce this point there too.

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Paul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

CRED: Fix get_task_cred() and task_state() to not resurrect dead credentials

It's possible for get_task_cred() as it currently stands to 'corrupt' a set of
credentials by incrementing their usage count after their replacement by the
task being accessed.

What happens is that get_task_cred() can race with commit_creds():

TASK_1 TASK_2 RCU_CLEANER
-->get_task_cred(TASK_2)
rcu_read_lock()
__cred = __task_cred(TASK_2)
-->commit_creds()
old_cred = TASK_2->real_cred
TASK_2->real_cred = ...
put_cred(old_cred)
  call_rcu(old_cred)
[__cred->usage == 0]
get_cred(__cred)
[__cred->usage == 1]
rcu_read_unlock()
-->put_cred_rcu()
[__cred->usage == 1]
panic()

However, since a tasks credentials are generally not changed very often, we can
reasonably make use of a loop involving reading the creds pointer and using
atomic_inc_not_zero() to attempt to increment it if it hasn't already hit zero.

If successful, we can safely return the credentials in the knowledge that, even
if the task we're accessing has released them, they haven't gone to the RCU
cleanup code.

We then change task_state() in procfs to use get_task_cred() rather than
calling get_cred() on the result of __task_cred(), as that suffers from the
same problem.

Without this change, a BUG_ON in __put_cred() or in put_cred_rcu() can be
tripped when it is noticed that the usage count is not zero as it ought to be,
for example:

kernel BUG at kernel/cred.c:168!
invalid opcode: 0000 [#1] SMP
last sysfs file: /sys/kernel/mm/ksm/run
CPU 0
Pid: 2436, comm: master Not tainted 2.6.33.3-85.fc13.x86_64 #1 0HR330/OptiPlex
745
RIP: 0010:[<ffffffff81069881>]  [<ffffffff81069881>] __put_cred+0xc/0x45
RSP: 0018:ffff88019e7e9eb8  EFLAGS: 00010202
RAX: 0000000000000001 RBX: ffff880161514480 RCX: 00000000ffffffff
RDX: 00000000ffffffff RSI: ffff880140c690c0 RDI: ffff880140c690c0
RBP: ffff88019e7e9eb8 R08: 00000000000000d0 R09: 0000000000000000
R10: 0000000000000001 R11: 0000000000000040 R12: ffff880140c690c0
R13: ffff88019e77aea0 R14: 00007fff336b0a5c R15: 0000000000000001
FS:  00007f12f50d97c0(0000) GS:ffff880007400000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 00007f8f461bc000 CR3: 00000001b26ce000 CR4: 00000000000006f0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process master (pid: 2436, threadinfo ffff88019e7e8000, task ffff88019e77aea0)
Stack:
 ffff88019e7e9ec8 ffffffff810698cd ffff88019e7e9ef8 ffffffff81069b45
<0> ffff880161514180 ffff880161514480 ffff880161514180 0000000000000000
<0> ffff88019e7e9f28 ffffffff8106aace 0000000000000001 0000000000000246
Call Trace:
 [<ffffffff810698cd>] put_cred+0x13/0x15
 [<ffffffff81069b45>] commit_creds+0x16b/0x175
 [<ffffffff8106aace>] set_current_groups+0x47/0x4e
 [<ffffffff8106ac89>] sys_setgroups+0xf6/0x105
 [<ffffffff81009b02>] system_call_fastpath+0x16/0x1b
Code: 48 8d 71 ff e8 7e 4e 15 00 85 c0 78 0b 8b 75 ec 48 89 df e8 ef 4a 15 00
48 83 c4 18 5b c9 c3 55 8b 07 8b 07 48 89 e5 85 c0 74 04 <0f> 0b eb fe 65 48 8b
04 25 00 cc 00 00 48 3b b8 58 04 00 00 75
RIP  [<ffffffff81069881>] __put_cred+0xc/0x45
 RSP <ffff88019e7e9eb8>
---[ end trace df391256a100ebdd ]---

Signed-off-by: David Howells <dhowells@redhat.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>

watchdog: update MAINTAINERS entry

Add Mailing-list and website to watchdog MAINTAINERS entry.

Signed-off-by: Wim Van Sebroeck <wim@iguana.be>

ALSA: hda - Add a PC-beep workaround for ASUS P5-V

ASUS P5-V provides a SSID that unexpectedly matches with the value
compilant with Realtek's specification.  Thus the driver interprets
it badly, resulting in non-working PC beep.

This patch adds a white-list for such a case; a white-list of known
devices with working PC beep.

Signed-off-by: Takashi Iwai <tiwai@suse.de>

ARM: Add barriers to io{read,write}{8,16,32} accessors as well

The ioread/iowrite accessors also need barriers as they're used in
place of readl/writel et.al. in portable drivers.  Create __iormb()
and __iowmb() which are conditionally defined to be barriers dependent
on ARM_DMA_MEM_BUFFERABLE, and always use these macros in the accessors.

Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

ARM: 6273/1: Add barriers to the I/O accessors if ARM_DMA_MEM_BUFFERABLE

When the coherent DMA buffers are mapped as Normal Non-cacheable
(ARM_DMA_MEM_BUFFERABLE enabled), buffer accesses are no longer ordered
with Device memory accesses causing failures in device drivers that do
not use the mandatory memory barriers before starting a DMA transfer.
LKML discussions led to the conclusion that such barriers have to be
added to the I/O accessors:

http://thread.gmane.org/gmane.linux.kernel/683509/focus=686153
http://thread.gmane.org/gmane.linux.ide/46414
http://thread.gmane.org/gmane.linux.kernel.cross-arch/5250

This patch introduces a wmb() barrier to the write*() I/O accessors to
handle the situations where Normal Non-cacheable writes are still in the
processor (or L2 cache controller) write buffer before a DMA transfer
command is issued. For the read*() accessors, a rmb() is introduced
after the I/O to avoid speculative loads where the driver polls for a
DMA transfer ready bit.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

ARM: 6272/1: Convert L2x0 to use the IO relaxed operations

This patch is in preparation for a subsequent patch which adds barriers
to the I/O accessors. Since the mandatory barriers may do an L2 cache
sync, this patch avoids a recursive call into l2x0_cache_sync() via the
write*() accessors and wmb() and a call into l2x0_cache_sync() with the
l2x0_lock held.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

ARM: 6271/1: Introduce *_relaxed() I/O accessors

This patch introduces readl*_relaxed()/write*_relaxed() as the main I/O
accessors (when __mem_pci is defined). The standard read*()/write*()
macros are now based on the relaxed accessors.

This patch is in preparation for a subsequent patch which adds barriers
to the I/O accessors.

Signed-off-by: Catalin Marinas <catalin.marinas@arm.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

ARM: 6275/1: ux500: don't use writeb() in uncompress.h

Don't use writeb() in uncompress.h, to avoid the following build errors
when the "Add barriers to the I/O accessors" series is applied.  Use
__raw_writeb() instead.

arch/arm/boot/compressed/misc.o: In function `putc':
arch/arm/mach-ux500/include/mach/uncompress.h:41:
undefined reference to `outer_cache'

Acked-by: Linus Walleij <linus.walleij@stericsson.com>
Signed-off-by: Rabin Vincent <rabin.vincent@stericsson.com>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

ARM: 6270/1: clean files in arch/arm/boot/compressed/

Update the compressed boot Makefile for ARM to
remove files during clean.

Signed-off-by: Magnus Damm <damm@opensource.se>
Signed-off-by: Russell King <rmk+kernel@arm.linux.org.uk>

drm/edid: Fix the HDTV hack sync adjustment

We're adjusting horizontal timings only here, moving vsync was just a
slavish translation of a typo in the X server.

Signed-off-by: Adam Jackson <ajax@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

drm/radeon/kms: fix radeon mid power profile reporting

Fix incorrectly reporting 'default' power profile, when it is set to 'mid'.

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Reviewed-by: Alex Deucher <alexdeucher@gmail.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>

Merge branch 'for_linus' of git://git./linux/kernel/git/jwessel/linux-2.6-kgdb

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/jwessel/linux-2.6-kgdb:
  x86,kgdb: Fix hw breakpoint regression

Merge git://git./linux/kernel/git/jejb/scsi-rc-fixes-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/jejb/scsi-rc-fixes-2.6:
  [SCSI] ibmvscsi: Fix oops when an interrupt is pending during probe
  [SCSI] zfcp: Update status read mempool
  [SCSI] zfcp: Do not wait for SBALs on stopped queue
  [SCSI] zfcp: Fix check whether unchained ct_els is possible
  [SCSI] ipr: fix resource path display and formatting