Shiji Yang [Tue, 31 Oct 2023 10:47:49 +0000 (18:47 +0800)]
base-files: support parse DT LED color and function
The 'label' property in led node has been deprecated and we'd better
to avoid using it. This patch allows us to extract DT OF LED name
from the newly introduced LED properties "color", "function" and
"function-enumerator".
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Shiji Yang [Tue, 31 Oct 2023 10:21:37 +0000 (18:21 +0800)]
generic: add more DT LED color and function definitions
Openwrt supports hundreds of devices. These newly added LED colors
and functions can help developers better describe LED indicators.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Russell Senior [Fri, 1 Dec 2023 21:48:56 +0000 (13:48 -0800)]
qoriq: pad rootfs with zeros
Presently, sysupgrade -n does *not* reset the overlayfs, retaining
unwanted filesystem contents. Adding PADDING=1 in front of
gen_image_generic.sh in image/Makefile ensures that the overlayfs is
recreated on firstboot.
Fixes: 080a769b4da8 ("qoriq: new target")
Signed-off-by: Russell Senior <russell@personaltelco.net>
[add Fixes tag, rewrite commit subject and message to respect line
length]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Russell Senior [Fri, 1 Dec 2023 21:48:55 +0000 (13:48 -0800)]
qoriq: set compat_version in board.d
Currently, sysupgrade without the -n option complains:
# sysupgrade -v tmp/openwrt-qoriq-generic-watchguard_firebox-m300-squashfs-sysupgrade.img.gz
upgrade: The device is supported, but the config is incompatible to the new image (1.0->1.1). Please upgrade without keeping config (sysupgrade -n).
upgrade: Kernel switched to FIT uImage. Update U-Boot environment.
upgrade: Reading partition table from bootdisk...
upgrade: Extract boot sector from the image
upgrade: Reading partition table from image...
Image check failed.
So, add the missing 05_compat-version to /etc/board.d/ to allow
sysupgrade to save config without using -f.
Fixes: c4b499bc03ab ("qoriq: use FIT uImage for Firebox M300 kernel")
Signed-off-by: Russell Senior <russell@personaltelco.net>
[drop invalid copyright header, add SPDX license header, shorten commit
subject, add fixes tag]
Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
Hauke Mehrtens [Sun, 26 Nov 2023 22:59:54 +0000 (23:59 +0100)]
x86: Add kmod-dwmac-intel
This adds the Intel Ethernet driver for the Intel Quark/EHL/TGL chips.
Fixes: #13994
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Sun, 26 Nov 2023 22:53:35 +0000 (23:53 +0100)]
armsr: Move kmod-stmmac-core to common place
Move the kmod-stmmac-core package to the common place to share it with
x86 later.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Stefan Kalscheuer [Thu, 30 Nov 2023 08:30:56 +0000 (09:30 +0100)]
mwlwifi: update to version 10.4.10-
20231129
Remove upstreamed patches:
* replace usage of the deprecated "pci-dma-compat.h" API (
6c03b27)
* remove uaccess and get_fs calls from PCIe for Kenel >= 5.18 (
1d0d08c)
Signed-off-by: Stefan Kalscheuer <stefan@stklcode.de>
Tony Ambardar [Fri, 24 Nov 2023 01:51:38 +0000 (17:51 -0800)]
bpftool: Update to v7.3.0
Update to the latest upstream release to include recent improvements and
bugfixes. Also refresh local patches.
Link: https://github.com/libbpf/bpftool/releases/tag/v7.3.0
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Tony Ambardar [Fri, 24 Nov 2023 01:50:10 +0000 (17:50 -0800)]
libbpf: Update to v1.3.0
Update to the latest upstream release to include recent improvements and
bugfixes. Also refresh local patches.
Link: https://github.com/libbpf/libbpf/releases/tag/v1.3.0
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Felix Fietkau [Thu, 30 Nov 2023 19:08:21 +0000 (20:08 +0100)]
hostapd: use new udebug ubus api to make debug rings configurable
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 30 Nov 2023 18:13:35 +0000 (19:13 +0100)]
ucode: update to Git HEAD (2023-11-30)
96f74b5be829 ubus: make ubus_context first in uc_ubus_connection_t
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 28 Nov 2023 14:10:57 +0000 (15:10 +0100)]
udebug: add more entries for the default config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 30 Nov 2023 18:19:01 +0000 (19:19 +0100)]
procd: update to Git HEAD (2023-11-28)
d852f877920b service: Fix retriggering of init.d-scripts.
7e6c6efd6fbc udebug: add support for logging via udebug
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 30 Nov 2023 12:42:50 +0000 (13:42 +0100)]
ubox: update to Git HEAD (2023-11-30)
cc34fb7b922f logd: add support for subscribing to the log object
c08709cceb55 logd: add udebug support
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 30 Nov 2023 11:53:29 +0000 (12:53 +0100)]
libubox: update to Git HEAD (2023-11-30)
325fea5c57cf udebug: add functions for manipulating entry length
e84c000c4756 udebug: add inline helper function to test if a buffer is allocated
40acbe34632b udebug: wait for response after buffer add/remove
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Thu, 30 Nov 2023 11:52:08 +0000 (12:52 +0100)]
udebug: update to Git HEAD (2023-11-30)
d49aadabb7a1 lib: fix dealing with udebugd restarts
9ec5fbb6aaad ubus: report ring size and data size via ubus api
86b4396baa44 ring: add debug messages for ring alloc errors
e02306af7c50 lib: add helper function for applying ring config
b613879cb049 client: send confirmation messages for ring add/remove
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Luis Mita [Wed, 22 Nov 2023 19:13:04 +0000 (15:13 -0400)]
mediatek: add support for Confiabits MT7981
Confiabits MT7981 is a Wi-Fi 6 router based on MediaTek MT7981.
Specification:
- SoC: MediaTek MT7981B
- CPU: 2x 1.3 GHz Cortex-A53
- Flash: 128 MiB SPI NAND
- RAM: 256 MiB
- WLAN: 2.4 GHz, 5 GHz (MediaTek MT7976CN, 802.11ax)
- Ethernet: 4x 10/100/1000 Mbps MT7531AE (3xLAN, 1xWAN)
- USB 2.0 port
- Buttons: 1 Reset button, 1 Mesh button.
- LEDs: 7x light-blue, 2x warm-white
- Serial console: internal 4-pin header, 115200 8n1
- Power: 12 VDC, 1.5 A
MAC addresses in stock firmware and in this commit:
+---------+-------------------+-----------+
| | MAC | Algorithm |
+---------+-------------------+-----------+
| WAN | 00:0c:43:xx:xx:e1 | label+1 |
| LAN | 00:0c:43:xx:xx:e0 | label |
| WLAN 2g | 00:0c:43:xx:xx:e0 | label |
| WLAN 5g | 02:0c:43:xx:xx:e0 | |
+---------+-------------------+-----------+
The label MAC was found in 'Factory', 0x4
Installation:
The stock firmware is OpenWrt-based. If you can reach LuCI or SSH, just use the sysupgrade image
with the 'Keep settings' option turned off.
Signed-off-by: Luis Mita <luis@luismita.com>
Hauke Mehrtens [Sun, 26 Nov 2023 22:04:04 +0000 (23:04 +0100)]
target: Make TARGET_SERIAL independent of GRUB configuration
GRUB_SERIAL is also used for the default serial on the target and not
only in grub. When no grub was build it was not available and the build
fails.
Rename GRUB_SERIAL to TARGET_SERIAL and make it always available on x86
and armsr targets.
Fixes: #14063
Fixes: b10768476f9d ("x86,armsr: interpolate GRUB_SERIAL into /etc/inittab")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
John Audia [Tue, 28 Nov 2023 22:08:16 +0000 (17:08 -0500)]
kernel: bump 5.15 to 5.15.140
Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.140
Removed upstreamed:
mvebu/patches-5.15/106-Revert-i2c-pxa-move-to-generic-GPIO-recovery.patch[1]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.140&id=
06d320ca170b4e59bb261e2ce3ffe84e9154d42b
Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Tue, 28 Nov 2023 19:34:53 +0000 (14:34 -0500)]
kernel: bump 6.1 to 6.1.64
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.64
Removed upstreamed:
ixp4xx/patches-6.1/0001-mtd-cfi_cmdset_0001-Byte-swap-OTP-info.patch[1]
mvebu/patches-6.1/106-Revert-i2c-pxa-move-to-generic-GPIO-recovery.patch[2]
qualcommax/patches-6.1/0026-v6.7-clk-qcom-ipq8074-drop-the-CLK_SET_RATE_PARENT-flag-f.patch[3]
Manually rebased:
bcm27xx/patches-6.1/950-0111-MMC-added-alternative-MMC-driver.patch
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=
3b93096d29c5b9ca2af94be4ee9949c1767acf17
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=
b3fd9db79e30d5eb5f76ef1f5b7e4f444af574ea
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.64&id=
877080a3490102da26b8d969588159b2385f739e
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
Daniel Golle [Wed, 29 Nov 2023 21:10:37 +0000 (21:10 +0000)]
mediatek: add kmod-usb3 to default package set of the ZBT-Z8102AX
Include XHCI USB drivers on the ZBT-Z8102AX router, the drivers are
required to be able to use the USB-connected M.2 slots for 4G/5G modems.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Tue, 28 Nov 2023 21:12:15 +0000 (22:12 +0100)]
libubox: update to Git HEAD (2023-11-28)
b77f2a4ce903 uloop: fix build using C++ compilers
260ad5bd1566 udebug: add ulog support
e80dc00ee90c link librt if needed for shm_open
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 28 Nov 2023 12:54:19 +0000 (13:54 +0100)]
ubus: update to Git HEAD (2023-11-28)
2b39a27d8bcc libubus: fix reconnect with auto subscribe
f84eb5998c6e libubus: fix initial subscribe with autosubscribe
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Tue, 28 Nov 2023 11:51:37 +0000 (12:51 +0100)]
ubox: add acl file for logd
Fixes ubus reconnect, since the process user id changes to 'logd'
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 27 Nov 2023 18:36:33 +0000 (19:36 +0100)]
udebug: move ubus dependency to libudebug
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 27 Nov 2023 17:37:55 +0000 (18:37 +0100)]
udebug: update to Git HEAD (2023-11-27)
a2301fa3b0c6 README: add wireshark info
cfd83ccc1e4e server: properly handle unclaimed file descriptors
cb71f64de0ec lib: remove leftover debug code
a92101631c0d lib: fix avl tree lookup
d4b99820afd0 lib: move library code to libubox, add ubus config handling code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Mon, 27 Nov 2023 17:37:33 +0000 (18:37 +0100)]
libubox: update to Git HEAD (2023-11-27)
82fa6480de7a uloop: add support for interval timers
13d9b04fb09d uloop: add support for user defined signal handlers
f7d156911311 uloop: properly initialize signal handler mask
8a5a4319a85c uloop: fix typo in signal handling rework
b3fa3d92e3eb uloop: reset flags after __uloop_fd_delete call
d4c3066e7c5e udebug: add udebug library code
Signed-off-by: Felix Fietkau <nbd@nbd.name>
David Bauer [Mon, 20 Nov 2023 15:36:43 +0000 (16:36 +0100)]
mediatek: copy config for Acer Predator W6
Config was previously not copied on sysupgrade.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Thu, 20 Apr 2023 17:49:55 +0000 (19:49 +0200)]
mediatek: add support for GL.iNet GL-MT2500
Hardware
--------
SoC: MediaTek MT7981BA
RAM: 1GB DDR4 (NANYA NT5AD512M16C4-JR)
MMC: 8GB eMMC (Samsung 8GTF4R)
ETH: 1000Base-T LAN (ePHY)
2500Base-T WAN (MaxLinear GPY211C)
BTN: 1x Reset Button
LED: System (blue/white)
VPN (white)
USB: 1x USB-A (USB 3.0)
UART: 115200 8N1 - Pinout on board next to LAN port
Don't connect 3.3V!
Known Issues
------------
U-Boot vendor recovery does not seem to accept any images, neither
GL.iNet images nor OpenWrt images. Recovery requires serial access!
Installation
------------
Upload the OpenWrt sysupgrade image to the Gl.iNet Web-UI. Make sure to
not retain existing settings.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Tue, 21 Nov 2023 13:10:09 +0000 (14:10 +0100)]
rockchip: require image metadata
All devices in the rockchip target have appended image-metadata. Enforce
the presence of this metadata to avoid flashing incomplete images.
This is the de-facto standard for almost all OpenWrt targets.
Signed-off-by: David Bauer <mail@david-bauer.net>
Lech Perczak [Thu, 16 Nov 2023 16:30:11 +0000 (17:30 +0100)]
ath79: fortinet-fap-221-b: convert to nvmem-layout
Now that MAC address parser supports the hex format (without
delimiters), use the canonical MAC address stored in U-boot partition.
Get rid of the userspace adjustments which are no longer necessary.
While at that, move the mac-base to the common part, as it is again
exactly the same in both models.
And convert ART partition too - keep that one separate, as calibration
data length differs between the models.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Lech Perczak [Thu, 16 Nov 2023 16:17:32 +0000 (17:17 +0100)]
ath79: fortinet-fap-220-b: convert to nvmem-layout
Now that MAC address parser supports the hex format (without
delimiters), use the canonical MAC address stored in U-boot partition.
Get rid of the "mac-address-increment" binding.
While at that, convert ART partition too.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Lech Perczak [Sat, 25 Nov 2023 02:09:30 +0000 (03:09 +0100)]
ath79: fortinet-fap-220-b: fix WLAN MAC addresses
Addresses were swapped compared to the factory firmware. In addition to
that, one of them was shifted by -1. Fix that by setting wlan0 MAC
offset to 9, and wlan1 MAC offset to 2.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Hauke Mehrtens [Sun, 26 Nov 2023 19:37:01 +0000 (20:37 +0100)]
ustream-ssl: update to Git HEAD (2023-11-26)
91666a3 ustream-mbedtls: Add compatibility with Mbed TLS 3.0.0
263b9a9 cmake: Fail if undefined symbols are used
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Xiaojun Liu [Mon, 13 Nov 2023 03:59:45 +0000 (03:59 +0000)]
x86 64: Add new device Cordoba Edge Platform
Add new device Cordoba Edge Platform
hardware specifications: CPU - Intel Atom C3000
Ethernet - 2 10Gbps ixgbe SPF+
2 1Gbps ixgbe RJ45/SPF
4 2.5Gbps igc RJ45
WiFi - mt7915e
LED - 3 multicolor(red|blue|green) LEDs
Signed-off-by: Xiaojun Liu <xiaojun.liu@silicom.co.il>
Sven Eckelmann [Sat, 18 Nov 2023 15:29:09 +0000 (16:29 +0100)]
dnsmasq: mark global ubus context as closed after fork
If the dnsmasq process forks to handle TCP connections, it closes the ubus
context. But instead of changing the daemon wide pointer to NULL, only the
local variable was adjusted - and this portion of the code was even dropped
(dead store) by some optimizing compilers.
It makes more sense to change the daemon->ubus pointer because various
functions are already checking it for NULL. It is also the behavior which
ubus_destroy() implements.
Fixes: d8b33dad0bb7 ("dnsmasq: add support for monitoring and modifying dns lookup results via ubus")
Signed-off-by: Sven Eckelmann <sven@narfation.org>
Tianling Shen [Sun, 25 Jun 2023 16:37:31 +0000 (00:37 +0800)]
rockchip: add NanoPi R5C support
Hardware
--------
RockChip RK3568 ARM64 (4 cores)
1GB or 4GB LPDDR4X RAM
2x 2500 Base-T
4 LEDs (LAN / WAN / WIFI / POWER)
1 Button (Reset)
8GB or 32GB eMMC on-board
Micro-SD Slot
M.2 Slot
2x USB 3.0 Port
Installation
------------
Uncompress the OpenWrt sysupgrade and write it to a micro SD card or
internal eMMC using dd.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sun, 25 Jun 2023 16:37:30 +0000 (00:37 +0800)]
uboot-rockchip: add NanoPi R5C support
Add support for the FriendlyARM NanoPi R5C.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sun, 25 Jun 2023 16:37:30 +0000 (00:37 +0800)]
rockchip: add NanoPi R5S support
Hardware
--------
RockChip RK3568 ARM64 (4 cores)
2GB or 4GB LPDDR4X RAM
1x 1000 Base-T
2x 2500 Base-T
4 LEDs (LAN1 / LAN2 / WAN / POWER)
8GB eMMC on-board
Micro-SD Slot
M.2 Slot
2x USB 3.0 Port
Installation
------------
Uncompress the OpenWrt sysupgrade and write it to a micro SD card or
internal eMMC using dd.
Tested-by: Packet Please <pktpls@systemli.org>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sun, 25 Jun 2023 16:37:30 +0000 (00:37 +0800)]
uboot-rockchip: add NanoPi R5S support
Add support for the FriendlyARM NanoPi R5S support.
Tested-by: Packet Please <pktpls@systemli.org>
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sun, 25 Jun 2023 16:37:29 +0000 (00:37 +0800)]
rockchip: armv8: broaden boardname
Now we have rk356x support :-)
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sun, 25 Jun 2023 16:37:29 +0000 (00:37 +0800)]
rockchip: enable drivers for rk356x
Enable all necessary drivers for the rk356x SoCs, including PHY,
SCMI, SPI etc. Also backport 2 upstream patches for sdhci fixes.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sun, 25 Jun 2023 16:37:29 +0000 (00:37 +0800)]
rockchip: remove kernel 5.15 patches and config
As we switched to kernel 6.1, these files can go.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sun, 25 Jun 2023 16:37:28 +0000 (00:37 +0800)]
rockchip: switch to kernel 6.1
Required by the following rk3568 support.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sun, 25 Jun 2023 16:37:28 +0000 (00:37 +0800)]
rockchip: move image generation command to default
It's applicable for all devices so move it to default to reduce
redudant code. Addtionally introduce a new variable `BOOT_SCRIPT`
to allow custom boot script (if necessary).
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sun, 25 Jun 2023 16:37:28 +0000 (00:37 +0800)]
rkbin: add new TF-A package for rk35xx
Currently there's no usable mainline (open source) TF-A implementation
for rk35xx SoCs, so pack the prebuilt firmware from the vendor.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sun, 25 Jun 2023 16:37:27 +0000 (00:37 +0800)]
uboot-rockchip: Update to 2023.07.02
* Removed swig hacks and prebuilt of-platdata
* Removed upstreamed patches
- 101-rock64pro-disable-CONFIG_USE_PREBOOT.patch
- 102-rockchip-rk3328-Add-support-for-FriendlyARM-NanoPi-R2C.patch
* Reordered patches
* Introduced new dependencies check
* Overrided default PATH to avoid race condition
(host python3 vs hostpkg python3)
* Switched to use UBOOT_CUSTOMIZE_CONFIG for config update
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sat, 25 Nov 2023 15:17:15 +0000 (23:17 +0800)]
uboot-sunxi: use intree dtc explicitly
This replaces pylibfdt hack.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sat, 25 Nov 2023 15:22:59 +0000 (23:22 +0800)]
uboot-sifiveu: use intree dtc explicitly
This replaces pylibfdt hack.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sat, 25 Nov 2023 15:21:22 +0000 (23:21 +0800)]
uboot-mediatek: use intree dtc explicitly
This replaces pylibfdt hack.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sun, 25 Jun 2023 16:37:27 +0000 (00:37 +0800)]
u-boot: introduce dependencies check for swig and pyelftools
They are required by modern u-boot builds,
e.g. uboot-rockchip and uboot-sunxi.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tony Ambardar [Sat, 11 Nov 2023 12:53:26 +0000 (04:53 -0800)]
ipq40xx: enable UBI size checks for some Linksys NAND devices
Add correct NAND_SIZE in device definitions for EA6350v3, EA8300, MR8300,
WHW01 and WHW03v2, to enable improved image size checks wrt UBI reserved
blocks on NAND devices.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Tony Ambardar [Sat, 11 Nov 2023 12:46:14 +0000 (04:46 -0800)]
image: improve UBI image sizing on NAND devices
Many NAND devices use a build recipe with "append-ubi | check-size" to
ensure factory images don't exceed the target flash partition size.
However, UBI reserves space for bad block handling and other operational
overhead, and thus 'check-size' can overestimate the space available by
several MB. In practice, this means a failed check is definitely a failure,
while a passing check is only probably a pass.
Improve the situation by teaching 'Build/append-ubi' to check image sizes
while accounting for UBI reserved blocks. Add new device variable NAND_SIZE
and use with existing IMAGE_SIZE to derate the available space. Each UBI
device reserves 20 PEBs per 1024 PEBs of the entire NAND device for bad
blocks, plus an additional 4 PEBs overhead.
Many devices can transparently enable this check by setting NAND_SIZE based
on their flash storage, and may then remove any unneeded 'check-size'.
Link: http://www.linux-mtd.infradead.org/doc/ubi.html#L_overhead
Suggested-by: Shiji Yang <yangshiji66@qq.com>
Suggested-by: Robert Marko <robimarko@gmail.com>
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Tony Ambardar [Tue, 14 Nov 2023 01:14:07 +0000 (17:14 -0800)]
image: fix Linksys image alignment and simplify footer creation
Current factory image sizes for Linksys devices are 256-byte aligned. This
is not an issue writing factory images from the OpenWrt or Linksys GUIs,
but can lead to failures using a TFTP client from the Linksys bootloader:
NAND write: device 1 offset 0x2800000, size 0xc00100
Attempt to write to non page aligned data
NAND write to offset
2800000 failed -22
0 bytes written: ERROR
Simplify Linksys footer creation by migrating to a makefile build recipe,
and pre-pad the footer (with 0xFF) to ensure the final image is $(PAGESIZE)
aligned. Finally, remove the old linksys-image.sh script no longer needed.
Linksys footer details are given below for future reference. The 256-byte
footer is appended to factory images and tested by both the Linksys
Upgrader (observed in EA6350v3) and OpenWrt sysupgrade.
Footer format:
.LINKSYS. Checked by Linksys upgrader before continuing. (9 bytes)
<VERSION> Upgrade version number, unchecked so arbitrary. (8 bytes)
<TYPE> Model of device, space padded (0x20). (15 bytes)
<CRC> CRC checksum of factory image to flash. (8 bytes)
<padding> Padding ('0' + 0x20 * 7) (8 bytes)
<signature> Signature of signer, unchecked so arbitrary. (16 bytes)
<padding> Padding with nulls (0x00) (192 bytes)
Link: https://github.com/openwrt/openwrt/pull/11405#issuecomment-1358510123
Link: https://github.com/openwrt/openwrt/pull/11405#issuecomment-1587517739
Reported-by: Stijn Segers <foss@volatilesystems.org>
Reported-by: Wyatt Martin <wawowl@gmail.com>
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Tony Ambardar [Sat, 11 Nov 2023 12:29:26 +0000 (04:29 -0800)]
image: use helper function for size units
Add the make function 'exp_units' for helping evaluate k/m/g size units in
expressions, and use this to consistently replace many ad hoc substitutions
like '$(subst k,* 1024,$(subst m, * 1024k,$(IMAGE_SIZE)))' in makefiles.
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Tony Ambardar [Mon, 2 Oct 2023 04:51:32 +0000 (21:51 -0700)]
ipq40xx: fix typo in Linksys WHW01 image definition
Use lower-case "k" in IMAGE_SIZE for Linksys WHW01, permitting proper unit
conversions in build recipes (e.g. 75776k -> 75776*1024).
Fixes: 2a9f3b7717 ("ipq40xx: fix up Linksys WHW01 board name, device definition")
Signed-off-by: Tony Ambardar <itugrok@yahoo.com>
Rani Hod [Sun, 12 Nov 2023 23:15:31 +0000 (01:15 +0200)]
ath79: add support for D-link DAP-1720 A1
D-Link DAP-1720 rev A1 is a mains-powered AC1750 Wi-Fi range extender,
manufactured by Alpha Networks [8WAPAC28.1A1G].
(in square brackets: PCB silkscreen markings)
Specifications:
* CPU (Qualcomm Atheros QCA9563-AL3A [U5]):
775 MHz single core MIPS 74Kc;
* RAM (Winbond W9751G6KB-25J [U3]):
64 MiB DDR2;
* ROM (Winbond W25Q128FV [U16]):
16 MiB SPI NOR flash;
* Ethernet (AR8033-AL1A PHY [U1], no switch):
1 GbE RJ45 port (no PHY LEDs);
* Wi-Fi
* 2.4 GHz (Qualcomm Atheros QCA9563-AL3A [U5]):
3x3 802.11n;
* 5 GHz (Qualcomm Atheros QCA9880-BR4A [U9]):
3x3 802.11ac Wave 1;
* 3 foldable dual-band antennas (U.fl) [P1],[P2],[P3];
* GPIO LEDs:
* RSSI low (red/green) [D2];
* RSSI medium (green) [D3];
* RSSI high (green) [D4];
* status (red/green) [D5];
* GPIO buttons:
* WPS [SW1], co-located with status LED;
* reset [SW4], accessible via hole in the side;
* Serial/UART:
Tx-Gnd-3v3-Rx [JP1], Tx is the square pin, 1.25mm pitch;
125000-8-n-1 in U-boot, 115200-8-n-1 in kernel;
* Misc:
* 12V VCC [JP2], fed from internal 12V/1A AC to DC converter;
* on/off slide switch [SW2] (disconnects VCC mechanically);
* unpopulated footprints for a Wi-Fi LED [D1];
* unpopulated footprints for a 4-pin 3-position slide switch (SW3);
MAC addresses:
* Label = LAN;
* 2.4 GHz WiFi = LAN;
* 5 GHz WiFi = LAN+2;
Installation:
* `factory.bin` can be used to install OpenWrt from OEM firmware via the
standard upgrade webpage at http://192.168.0.50/UpdateFirmware.html
* `recovery.bin` can be used to install OpenWrt (or revert to OEM
firmware) from D-Link Web Recovery. To enter web recovery, keep reset
button pressed and then power on the device. Reset button can be
released when the red status LED is bright; it will then blink slowly.
Set static IP to 192.168.0.10, navigate to http://192.168.0.50 and
upload 'recovery.bin'. Note that in web recovery mode the device
ignores ping and DHCP requests.
Note: 802.11s is not supported by the default `ath10k` driver and
firmware, but is supported by the non-CT driver and firmware variants.
The `-smallbuffers` driver variant is recommended due to RAM size.
Co-developed-by: Anthony Sepa <protectivedad@gmail.com>
Signed-off-by: Rani Hod <rani.hod@gmail.com>
Rosen Penev [Sun, 26 Nov 2023 04:36:49 +0000 (20:36 -0800)]
ath79: ar: convert to mac-base
Replacement for deprecated mac-address-increment
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sun, 26 Nov 2023 03:31:17 +0000 (19:31 -0800)]
ath79: ar: convert to nvmem-layout
Will allow removing deprecated mac-address-increment.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sun, 26 Nov 2023 01:36:49 +0000 (17:36 -0800)]
ath79: tp9343: convert to nvmem-layout
Allows getting rid of deprecated mac-address-increment.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sun, 26 Nov 2023 01:25:18 +0000 (17:25 -0800)]
ath79: qcn: convert to nvmem-layout
Allows getting rid of deprecated mac-address-increment.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Fri, 10 Nov 2023 22:55:43 +0000 (14:55 -0800)]
ath79: qca: remove mac-address-increment
nvmem-layout allows removal
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Thu, 9 Nov 2023 23:18:44 +0000 (15:18 -0800)]
ath79: qca: convert to nvmem-layout
Allows replacing mac-address-increment with mac-base.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 11 Nov 2023 00:21:29 +0000 (16:21 -0800)]
ath79: mikrotik: fix dts warnings
property has invalid length
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Wed, 8 Nov 2023 03:39:00 +0000 (19:39 -0800)]
ramips: mt7621: nix mac-address-increment
nvmem-layout allows removal
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Tue, 7 Nov 2023 23:55:58 +0000 (15:55 -0800)]
ramips: mt7621: convert to nvmem-layout
Allows replacing mac-address-increment with mac-base.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Wed, 8 Nov 2023 03:25:58 +0000 (19:25 -0800)]
ramips: mt7621: add interrupt-controller
Fixes dtc warning:
'#interrupt-cells' found, but node is not an interrupt provider
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 25 Nov 2023 21:35:04 +0000 (13:35 -0800)]
ramips: mt7620a: use mac-base
mac-address-increment is deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 25 Nov 2023 21:20:44 +0000 (13:20 -0800)]
ramips: mt7620a: convert to nvmem-layout
Allows using mac-base to replace mac-address-increment.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 25 Nov 2023 20:32:55 +0000 (12:32 -0800)]
ramips: mt7620n: convert to nvmem-layout
nvmem-cells is deprecated. nvmem-layout allows using mac-base.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Fri, 24 Nov 2023 02:59:35 +0000 (18:59 -0800)]
ramips: mt7628: use mac-base
mac-address-increment is deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Fri, 24 Nov 2023 02:31:55 +0000 (18:31 -0800)]
ramips: mt7628: use nvmem-layout
Will allow using mac-base.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 25 Nov 2023 22:11:08 +0000 (14:11 -0800)]
mediatek: use mac-base
mac-address-increment is deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sat, 25 Nov 2023 22:03:10 +0000 (14:03 -0800)]
mediatek: convert to nvmem-layout
Will allow removing mac-address-increment.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Fri, 24 Nov 2023 01:40:09 +0000 (17:40 -0800)]
ramips: rtxxxx: remove mac-address-increment
Deprecated and replaced upstream with mac-base.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Wed, 22 Nov 2023 23:48:24 +0000 (15:48 -0800)]
ramips: rtxxxx: convert to nvmem-layout
Allows replacing mac-adress-increment.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Chukun Pan [Mon, 6 Nov 2023 15:06:05 +0000 (23:06 +0800)]
mediatek: filogic: reorder alphabetically
Reorder scripts and image recipes to keep alphabetical order.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Chukun Pan [Sun, 5 Nov 2023 15:02:09 +0000 (23:02 +0800)]
uboot-envtools: filogic: reorder alphabetically
Reorder scripts to keep alphabetical order.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Chukun Pan [Fri, 17 Nov 2023 15:27:03 +0000 (23:27 +0800)]
mediatek: filogic: remove kmod-usb2 for GL-MT6000
The usb driver requires kmod-usb3, not kmod-usb2.
Remove the useless kmod-usb2 from default package.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Chukun Pan [Sat, 4 Nov 2023 15:50:20 +0000 (23:50 +0800)]
mediatek: Cetron CT3003: fixes typo for spi properties
Same as commit
3674689, correct 'buswidth' to 'bus-width'.
Also move the nmbm properties outside the partition definition.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Rosen Penev [Mon, 13 Nov 2023 19:47:17 +0000 (11:47 -0800)]
ipq40xx: remove mac-address-increment
nvmem-layout allows removal
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Mon, 13 Nov 2023 19:23:12 +0000 (11:23 -0800)]
ipq40xx: convert to nvmem-layout
Allows replacing mac-address-increment with mac-base.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Mon, 13 Nov 2023 20:02:38 +0000 (12:02 -0800)]
ipq40xx: fix dtc warnimg
I2C bus unit address format error, expected "62"
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Mon, 13 Nov 2023 20:20:51 +0000 (12:20 -0800)]
qualcommax: convert to nvmem-layout
nvmem-cells is deprecated
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Mon, 13 Nov 2023 20:23:07 +0000 (12:23 -0800)]
apm821xx: convert to nvmem-layout
nvmem-cells is deprecated.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Hauke Mehrtens [Sat, 25 Nov 2023 17:06:41 +0000 (18:06 +0100)]
mediatek: filogic: Fix GPIOs for Zbtlink ZBT-Z8102AX
The PGIO configuration should be added for the ZBT-Z8102AX and not the ZBT-Z8103AX
Fixes: c8c2f522625c ("mediatek: add support for Zbtlink ZBT-Z8102AX")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Xiaobo Liu [Tue, 14 Nov 2023 03:07:56 +0000 (11:07 +0800)]
ramips: mt76x8 add support for RTC class/drivers
This commit adds support for RTC class/drivers to the mt76x8 target.
Signed-off-by: Xiaobo Liu <cppcoffee@gmail.com>
Rosen Penev [Sat, 7 Oct 2023 04:55:01 +0000 (21:55 -0700)]
f2fs-tools: avoid dead symlinks in root
When building on the host, this avoids creating dead symlinks. Matches
what is done elsewhere.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Darlan Pedro de Campos [Fri, 24 Nov 2023 00:31:05 +0000 (19:31 -0500)]
ramips: add support for TP-Link EX220 v1
This device is very similar, if not identical, to the TP-Link AX23 v1
but is targeted at service providers and features a completely different
flash layout.
Hardware
--------
CPU: MediaTek MT7621 DAT
RAM: 128MB DDR3 (integrated)
FLASH: 16MB SPI-NOR
WiFi: MediaTek MT7905 + MT7975 (2.4 / 5 DBDC) 802.11ax
SERIAL: 115200 8N1
LEDs - (3V3 - GND - RX - TX) - ETH ports
Installation
------------
Flashing is only possible via a serial connection using the sysupgrade
image; the factory image must be signed. You can flash the sysupgrade
image directly through the U-Boot console, or preferably, by booting the
initramfs image and flashing with the sysupgrade command. Follow these
steps for sysupgrade flashing:
1. Establish a UART serial connection.
2. Set up a TFTP server at 192.168.0.2 and copy the initramfs image
there.
3. Power on the device and press any key to interrupt normal boot.
4. Load the initramfs image using tftpboot.
5. Boot with bootm.
6. If you haven't done so already, back up all stock mtd partitions.
7. Copy the sysupgrade image to the router.
8. Flash OpenWrt through either LuCI or the sysupgrade command. Remember
not to attempt saving settings.
Revert to stock firmware
------------------------
Flash stock firmware via OEM web-recovery mode. If you don't have access
to the stock firmware image, you will need to restore the firmware
partition backed up earlier.
Web-Recovery
------------
The router supports an HTTP recovery mode:
1. Turn off the router.
2. Press the reset button and power on the device.
3. When all LEDs start flashing, release reset and quickly press it
again.
The interface is reachable at 192.168.0.1 and supports installation of
the OEM factory image. Note that flashing OpenWrt this way is not
possible, as mentioned above.
Signed-off-by: Darlan Pedro de Campos <darlanpedro@gmail.com>
Michael Trinidad [Wed, 22 Nov 2023 02:46:27 +0000 (21:46 -0500)]
mwlwifi: update to version 10.4.10-
20231120
Upstream PR 416 improvements:
-AMPDU Optimization of priority calculation. (8864/8897)
-8864/8897 fix wpa3
-Add cypher suite to driver capabilities (all chip)
-Alignment of pcie_tx_ctrl* (all chip)
-"feature" normalization for all chips (all chip)
-Add modprobe parameters (all chip)
-fix monitoring (all chip)
-Code separation by chipset (8864/8897 <=> 8997)
-dump_prob decommissioning (8864/8897/8997)
-fix amsdu high ping latency (8864/8897/8997)
-drop debug info in hostcmd_get_hw_spec() (8864/8897)
-Add wcb_base in debug info (8864)
-Rewrite AMSDU packets (8864/8897/8997)
-debug rewrite output mwl_debugfs_sta_read (all chip)
-Improved encryption interoperability (8864/8897/8997)
-factorization encrypted packet test (8864/8897/8997)
-Change 88W8864 firmware to 7.2.9.27 (8864/8897)
-Fix the AMPDU session lifecycle (8864/8897/8997)
-Remove the tx done packets mechanism (8864/8897)
Signed-off-by: Michael Trinidad <trinidude4@hotmail.com>
Filip Milivojevic [Sat, 11 Nov 2023 09:57:32 +0000 (10:57 +0100)]
ramips: Add support for Cudy WR1300 v3
Specifications:
- SoC: MediaTek MT7621AT
- RAM: 128 MB (DDR3)
- Flash: 16 MB (SPI NOR)
- WiFi: MediaTek MT7603E, MediaTek MT7613BE
- Switch: 1 WAN, 4 LAN (Gigabit)
- Buttons: Reset, WPS
- LEDs: System, Wan, Lan 1-4, WiFi 2.4G, WiFi 5G, WPS
- Power: DC 12V 1A tip positive
Download and flash the manufacturer's built OpenWRT image available at
http://www.cudytech.com/openwrt_software_download
Install the new OpenWRT image via luci (System -> Backup/Flash firmware)
Be sure to NOT keep settings. The force upgrade may need to be checked
due to differences in router naming conventions.
Cudy WR1300 v3 differs from v2 only in swapped WiFi chip PCIe slots. Common
nodes are extracted to .dtsi and new v2 and v3 dts are created.
Cudy WR1300 v2 dts now contains ieee80211-freq-limit and has
eeprom_factory_8000 length fixed.
The same manufacturer's built OpenWRT image is provided for both v2 and v3
devices as a step in installing, but for proper WiFi functionality,
a separate build is required.
Recovery:
- Loads only signed manufacture firmware due to bootloader RSA verification
- serve tftp-recovery image as /recovery.bin on 192.168.1.88/24
- connect to any lan ethernet port
- power on the device while holding the reset button
- wait at least 8 seconds before releasing reset button for image to
download
- See http://www.cudytech.com/newsinfo/547425.html
Signed-off-by: Filip Milivojevic <zekica@gmail.com>
Nicolò Veronese [Thu, 2 Nov 2023 18:53:08 +0000 (19:53 +0100)]
uboot-envtools: add support for Zyxel EX5601-T0 ubootmod
The ubootmod bootlaoder for EX5601-T0 uses two partitions
in ubi to store enviroment variables. so proper config
is needed.
Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
Valerio 'ftp21' Mancini [Wed, 4 Oct 2023 09:43:25 +0000 (11:43 +0200)]
mediatek: add Zyxel EX5601-T0 with uboot custom partition
The flash procedure is similar to the Xiaomi AX6000 router.
Load openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-initramfs-recovery.itb from original Zyxel U-Boot:
tftpboot openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-initramfs-recovery.itb
bootm 0x46000000
Load mtd-rw
insmod /lib/modules/$(uname -r)/mtd-rw.ko i_want_a_brick=1
Format ubi and create ubootenv partitions
ubidetach -p /dev/mtd5; ubiformat /dev/mtd5 -y; ubiattach -p /dev/mtd5
ubimkvol /dev/ubi0 -n 0 -N ubootenv -s 128KiB
ubimkvol /dev/ubi0 -n 1 -N ubootenv2 -s 128KiB
Copy openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-initramfs-recovery.itb to /tmp and create recovery partition.
If your recovery image is larger than 10MiB, size the recovery partition accordingly to make it fit.
ubimkvol /dev/ubi0 -n 2 -N recovery -s 10MiB
ubiupdatevol /dev/ubi0_2 openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-initramfs-recovery.itb
Copy preloader and uboot to /tmp and write them in the mtd
mtd write /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-preloader.bin bl2
mtd write /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-bl31-uboot.fip fip
Now write the firmware:
sysupgrade -n /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-squashfs-sysupgrade.itb
To create a correct BL2, I had to add a profile for 'spim:4k+256' as I could not find a way to value the variable 'NAND_TYPE'.
Features and fixes from hitech95 tree has been squashed, I'm attaching his commit message:
The Power LED was not working correctly and not reacting
to the boot process and statuses.
The board has space (footprint) for an unpopulated Zigbee chip,
while we dont know the device model having this chip populated
we have to assure that the common dts doesnt enable
interfaces that share pins with such device.
In this instance the PCIe and the uart1 and uart2 are disabled.
Some of the control PCIE pins seems to be used for the Zigbee chip,
UART1 seems to be used as a flash port while UART2 should be the
main comunication interface of Zigbee chip.
The Zigbee chip should be a EFR32MG21. But the pins used for UART
seems to be not on standard PINS used by other adapters.
So it cannot run firmwares shared on the web.
But it should be possible to build a custom firmware with
the corrtect pinmux.
This commit also contains the following squashed commit from hitech95
- mediatek: fix sysupgrade for Zyxel EX7601-T0 ubootmod
Changes and fixes added in common board:
- added aliases for boot status leds.
- added aliases for the mac-label-device.
- added pin claims for core features (MDIO and UART 0)
- added default LEDs configuration (01_leds)
- added default network configuration (02_network)
- added missing kmod-usb3 module for USB3
- fixed LED names
- fixed reset pin for SLIC chip
- removed unused pinmux configurations and devices
- fix LAN (switch) port numbering
- using nvmem cells for wifi eeprom, dropping deprecated "mediatek,mtd-eeprom"
- proper factory partition and mac address handling
- cleaned up spi_nand sections and partition
Changes and fixxes added in stock layout:
- added NMBM, if u-boot has it, the kernel must be informed.
Co-authored-by: Nicolò Veronese <nicveronese@gmail.com>
Co-developed-by: Nicolò Veronese <nicveronese@gmail.com>
Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
Valerio 'ftp21' Mancini [Sat, 26 Aug 2023 22:01:58 +0000 (00:01 +0200)]
uboot-mediatek: add initial Zyxel EX5601-T0 support
Flash procedure is described in next commit.
TLDR:
Copy preloader and uboot to /tmp and write them in the mtd.
This will also require new UBI partition and
volumes to boot openwrt.
mtd write /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-preloader.bin bl2
mtd write /tmp/openwrt-mediatek-filogic-zyxel_ex5601-t0-ubootmod-bl31-uboot.fip fip
Changelist:
- Added profile for 4k+256 SPI NAND_TYPE
- Added basic Zyxel EX5601-T0 uboot profile
Backported from hitech95 branch:
- Button RESET pin fix
- Button WPS pin fix
Signed-off-by: Valerio 'ftp21' Mancini <ftp21@ftp21.eu>
Signed-off-by: Nicolò Veronese <nicveronese@gmail.com>
Daniel Golle [Sat, 25 Nov 2023 03:20:50 +0000 (03:20 +0000)]
mediatek: remove DTS property added by mistake
Remove bogus 'phy-handle = <&phy0>;', an undefined reference.
Fixes: c8c2f52262 ("mediatek: add support for Zbtlink ZBT-Z8102AX")
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Mikhail Zhilkin [Sun, 12 Nov 2023 07:58:26 +0000 (07:58 +0000)]
ramips: add support for Sercomm CPJ routers
This commit adds support for following wireless routers:
- Rostelecom RT-FL-1 (Serсomm RT-FL-1)
- Rostelecom S1010 (Serсomm S1010.RT)
The devices are almost identical and the only difference is one bit in the
factory image PID (thanks to Maximilian Weinmann <x1@disroot.org>
(@MaxS0niX) for the info and idea to make one PR for two devices at once).
Devices specification
---------------------
SoC: MediaTek MT7620A, MIPS
RAM: 64 MB
Flash: 16 MB SPI NOR
Wireless 2.4: MT7620 (b/g/n, 2x2)
Wireless 5: MT7612EN (a/n/ac, 2x2)
Ethernet: 5xFE (WAN, LAN1-4)
BootLoader: U-Boot
Buttons: 2 (wps, reset)
LEDs: 1 amber and 1 green status GPIO leds
5 green ethernet GPIO leds
1 green GPIO 2.4 GHz WLAN led
1 green PHY 5 GHz WLAN led
1 green unmanaged power led
USB ports: No
Power: 12 VDC, 1 A
Connector: Barrel
OEM easy installation
---------------------
1. Remove all dots from the factory image filename (except the dot
before file extension)
2. Upload and update the firmware via the original web interface
3. Wait until green status led stops blinking (can take several minutes)
4. Login to OpenWrt initramsfs. It's recommended to make a backup of the
mtd partitions at this point.
4. Perform sysupgrade using the following command (or use Luci):
sysupgrade -n sysupgrade.bin
5. Wait until green status les stops blinking (can take several minutes)
6. Mission acomplished
Return to Stock
---------------
Option 1. Restore firmware Slot1 from a backup (firmware2.bin):
cd /tmp
mtd -e Firmware2 write firmware2.bin Firmware2
printf 1 | dd bs=1 seek=$((0x18007)) count=1 of=/dev/mtdblock2
reboot
Option 2. Decrypt, ungzip and split stock firmware image into the parts,
take Slot1 parts (kernel2.bin, rootfs2.bin) and write them:
cd /tmp
mtd -e Kernel2 write kernel2.bin Kernel2
mtd -e RootFS2 write rootfs2.bin RootFS2
printf 1 | dd bs=1 seek=$((0x18007)) count=1 of=/dev/mtdblock2
reboot
More about stock firmware decryption:
Link: https://github.com/Psychotropos/sercomm_fwutils/
Debricking
----------
Use sercomm-recovery tool. You can use "ALL" mtd partition backup as a
recovery image.
Link: https://github.com/danitool/sercomm-recovery
MAC addresses
-------------
+---------+-------------------+-----------+
| | MAC | Algorithm |
+---------+-------------------+-----------+
| label | 48:3e:xx:xx:xx:1e | label |
| LAN | 48:3e:xx:xx:xx:1e | label |
| WAN | 48:3e:xx:xx:xx:28 | label+10 |
| WLAN 2g | 48:3e:xx:xx:xx:20 | label+2 |
| WLAN 5g | 48:3e:xx:xx:xx:24 | label+6 |
+---------+-------------------+-----------+
Co-authored-by: Vadzim Vabishchevich <bestmc2009@gmail.com>
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Mikhail Zhilkin [Sun, 12 Nov 2023 07:56:08 +0000 (07:56 +0000)]
ramips: mt7620: drop unnecessary trailing tabs
Let's tidy up a bit (drop unnecessary trailing tabs).
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Mikhail Zhilkin [Sun, 12 Nov 2023 07:52:45 +0000 (07:52 +0000)]
ramips: sercomm.mk: make common recipe to set a bit in pid
This commit makes a common recipe to set bit in Sercomm factory pid since
this is necessary for several devices (WiFire S1500.nbn, Rostelecom
RT-FL-1) at different offsets.
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Mikhail Zhilkin [Sun, 12 Nov 2023 07:46:11 +0000 (07:46 +0000)]
scripts: sercomm-pid.py: use uppercase hwid in pid
Sercomm uses uppercase for hexadecimal representation of the device
hardware IDs in factory image PID. This commit brings the sercomm-pid.py
script into compliance with the original Sercomm algorithm.
Example
-------
+--------+-------------+-----------+-------------+
| Device | PID (before | PID | PID (after |
| HWID | the commit) | (Sercomm) | the commit) |
+--------+-------------+-----------+-------------+
| CPJ | 43 50 4a | 43 50 4A | 43 50 4A |
+--------+-------------+-----------+-------------+
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Jitao Lu [Tue, 21 Nov 2023 14:46:11 +0000 (22:46 +0800)]
linux-firmware: intel: add firmware for AX101
iwlwifi from 6.5 supports API version up to 83, but 81 is the latest one
available from linux-firmware
20230804.
Signed-off-by: Jitao Lu <dianlujitao@gmail.com>
projects / openwrt / staging / neocturne.git / log