Yangbo Lu [Mon, 16 Jul 2018 08:59:48 +0000 (16:59 +0800)]
layerscape: drop uboot-layerscape patches
Dropped uboot-layerscape patches which were environemnt patches.
We will make u-boot environment binaries with a txt file for all
devices.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Yangbo Lu [Tue, 3 Jul 2018 06:17:08 +0000 (14:17 +0800)]
layerscape: update restool to LSDK-18.06
The restool source code had been migrated to codeaurora
for LSDK-18.06 release and the future release. This patch
is to update restool to LSDK-18.06 release.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Yangbo Lu [Tue, 3 Jul 2018 06:58:01 +0000 (14:58 +0800)]
layerscape: update ls-ppa to LSDK-18.06
This patch is to update ls-ppa to LSDK-18.06 release
and to rework ls-ppa makefile to make it more readable.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Yangbo Lu [Tue, 3 Jul 2018 03:07:06 +0000 (11:07 +0800)]
layerscape: update ls-rcw to LSDK-18.06
The rcw source code had been migrated to codeaurora
for LSDK-18.06 release and the future release. The
source code had also involved ls1012ardb/ls1012afrdm/
ls1088ardb/ls2088ardb rcw, so we updated ls-rcw to
LSDK-18.06, reworked the makefile and dropped ls-rcw-bin
package in this patch. Also reworked ls-rcw patch to
adapt to the latest source code.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Yangbo Lu [Mon, 2 Jul 2018 08:33:35 +0000 (16:33 +0800)]
layerscape: update ppfe-firmware to LSDK-18.06
This patch is to update ppfe-firmware to LSDK-18.06 release.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Yangbo Lu [Mon, 2 Jul 2018 06:58:30 +0000 (14:58 +0800)]
layerscape: update ls-mc to LSDK-18.06
This patch is to update ls-mc to LSDK-18.06 release.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Yangbo Lu [Mon, 2 Jul 2018 03:12:17 +0000 (11:12 +0800)]
layerscape: update ls-dpl to LSDK-18.06
The dpl-examples source code had been migrated to
codeaurora for LSDK-18.06 release and the future
release. This patch is to update this package to
LSDK-18.06.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Yangbo Lu [Fri, 29 Jun 2018 08:20:32 +0000 (16:20 +0800)]
layerscape: update fman-ucode to LSDK-18.06
Actually there was no change for fman-ucode in LSDK-18.06
just tagged with LSDK-18.06. This patch is to rework the
fman-ucode makefile to make it more readable, and to use
lsdk-1806 as the PKG_VERSION.
Signed-off-by: Yangbo Lu <yangbo.lu@nxp.com>
Luis Araneda [Wed, 12 Sep 2018 05:48:10 +0000 (02:48 -0300)]
zynq: kernel: select FPGA-related configs
These configs are necessary to program the FPGA fabric
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Jasper Scholte [Wed, 19 Sep 2018 20:31:26 +0000 (22:31 +0200)]
sunxi: build image/uboot for the NanoPi NEO2
The NanoPi NEO2 is a small Allwinner H5 based board available with
different DRAM configurations.
This board is very similar to the NanoPi NEO PLUS2
Signed-off-by: Jasper Scholte <NightNL@outlook.com>
Brett Mastbergen [Wed, 12 Sep 2018 19:04:55 +0000 (15:04 -0400)]
kernel: generic: Fix nftables inet table breakage
Commit
b7265c59ab7d ("kernel: backport a series of netfilter cleanup
patches to 4.14") added patch 302-netfilter-nf_tables_inet-don-t-use-
multihook-infrast.patch. That patch switches the netfilter core in the
kernel to use the new native NFPROTO_INET support. Unfortunately, the
new native NFPROTO_INET support does not exist in 4.14 and was not
backported along with this patchset. As such, nftables inet tables never
see any traffic.
As an example the following nft counter rule should increment for every
packet coming into the box, but never will:
nft add table inet foo
nft add chain inet foo bar { type filter hook input priority 0\; }
nft add rule inet foo bar counter
This commit pulls in the required backport patches to add the new
native NFPROTO_INET support, and thus restore nftables inet table
functionality.
Tested on Turris Omnia (mvebu)
Fixes: b7265c59ab7d ("kernel: backport a series of netfilter cleanup ...")
Signed-off-by: Brett Mastbergen <bmastbergen@untangle.com>
Hartmut Knaack [Mon, 10 Sep 2018 23:33:37 +0000 (01:33 +0200)]
kernel: add Si7020 relative humidity/temperature sensor driver
Add support for the Silicon Labs Si7020 family of relative humidity and
temperature sensors using the I2C bus.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Hartmut Knaack [Mon, 10 Sep 2018 23:33:36 +0000 (01:33 +0200)]
kernel: add TSL4531 ambient light sensor driver
Add support for the TAOS TSL4531x family of ambient light sensors using
the I2C bus.
Signed-off-by: Hartmut Knaack <knaack.h@gmx.de>
Robert Marko [Wed, 19 Sep 2018 09:18:00 +0000 (11:18 +0200)]
ath79: Fix GL-AR300M USB trigger
Correct a typo preventing USB trigger to work on AR300M.
Signed-off-by: Robert Marko <robimarko@gmail.com>
David Bauer [Tue, 11 Sep 2018 15:04:16 +0000 (17:04 +0200)]
ar71xx: flag FritzBox 4020 buttons as active low
Buttons of AVM FritzBox 4020 are incorrectly flagged as active high.
This was an oversight as RFKill button was working as expected even
with incorrectly flagged GPIO.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Tue, 11 Sep 2018 15:04:17 +0000 (17:04 +0200)]
ath79: flag FritzBox 4020 buttons as active low
Buttons of AVM FritzBox 4020 are incorrectly flagged as active high.
This was an oversight as RFKill button was working as expected even
with incorrectly flagged GPIO.
Signed-off-by: David Bauer <mail@david-bauer.net>
Magnus Kroken [Sat, 15 Sep 2018 22:44:43 +0000 (00:44 +0200)]
mbedtls: update to 2.13.0
* Fixed a security issue in the X.509 module which could lead to a buffer overread during certificate extensions parsing.
* Several bugfixes.
* Improvements for better support for DTLS on low-bandwidth, high latency networks with high packet loss.
Signed-off-by: Magnus Kroken <mkroken@gmail.com>
Felix Fietkau [Sat, 22 Sep 2018 13:34:40 +0000 (15:34 +0200)]
ath9k: add back support for using tx99 with active monitor interfaces
Fixes controlling bitrate
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 22 Sep 2018 13:18:46 +0000 (15:18 +0200)]
mac80211: fix tx queue allocation for active monitor interfaces
Fixes a crash with drivers like ath9k
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sat, 22 Sep 2018 10:56:10 +0000 (12:56 +0200)]
mt76: fix tx power issue for mt76x2
6e1898d mt76x2: fix tx power configuration for VHT mcs 9
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Kevin Darbyshire-Bryant [Fri, 21 Sep 2018 18:41:27 +0000 (19:41 +0100)]
kernel: re-enable MIPS VDSO
kernel upstream commit
9efcaa7c4afba5628f2650a76f69c798f47eeb18 to 4.14
itself a backport of
0f02cfbc3d9e413d450d8d0fd660077c23f67eff has
resolved the cache line issues that led to us disabling VDSO by default
on MIPS.
Remove our force disable patch:
pending-4.14/206-mips-disable-vdso.patch
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Acked-by: Hauke Mehrtens <hauke@hauke-m.de>
Luiz Angelo Daros de Luca [Tue, 18 Sep 2018 04:07:57 +0000 (01:07 -0300)]
elfutils: bump to 0.174
- Simplified musl patch with error.h concentrated into system.h
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Christian Lamparter [Tue, 4 Sep 2018 21:27:00 +0000 (23:27 +0200)]
toolchain/musl: update to version 1.1.20
This release introduces the ability to replace/interpose the allocator
(malloc) subject to certain restrictions, adds an experimental m68k
port, and makes notable improvements to stdio (application-provided
buffers), getaddrinfo (AI_ADDRCONFIG, support for IPv4-only kernel
configurations), the dynamic linker (safety against dlopen of
libraries using initial-exec TLS model, reclaiming unused memory on
FDPIC archs, better dladdr results), and handling of default thread
stack size (pthread_setattr_default_np now works more reliably).
Many bugs have been fixed, including potentially dangerous regressions
in iconv (only for new conversions to legacy encodings) and visibly
incorrect behavior in printf on non-x86 archs (%a format with
precision specifier), in getopt_long_only when short options are a
prefix for a long option, in complex arc-trig/hyperbolic functions, in
strftime and mktime (timezone-specific issues), and numerous
less-obvious places.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
[altered commit msg a bit keeping it tight]
Tested-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Thu, 20 Sep 2018 12:37:43 +0000 (14:37 +0200)]
kernel: bump 4.14 to 4.14.71
Refreshed all patches.
Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Thu, 20 Sep 2018 12:36:42 +0000 (14:36 +0200)]
kernel: bump 4.9 to 4.9.128
Refreshed all patches.
Compile-tested on: ar71xx
Runtime-tested on: ar71xx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Kevin Darbyshire-Bryant [Thu, 20 Sep 2018 17:26:33 +0000 (18:26 +0100)]
dnsmasq: Change behavior when RD bit unset in queries.
Backport upstream commit
Change anti cache-snooping behaviour with queries with the
recursion-desired bit unset. Instead to returning SERVFAIL, we
now always forward, and never answer from the cache. This
allows "dig +trace" command to work.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Jonathan Lancett [Thu, 20 Sep 2018 18:16:01 +0000 (19:16 +0100)]
mwlwifi: driver version to 10.3.8.0-
20180920
Signed-off-by: Jonathan Lancett <j.lancett@ntlworld.com>
[minor tweak to commit title]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Felix Fietkau [Thu, 20 Sep 2018 08:06:49 +0000 (10:06 +0200)]
ath9k: fix unloading the module
Registering a GPIO chip with the ath9k device as parent prevents unload,
because the gpiochip core increases the module use count.
Unfortunately, the only way to avoid this at the moment seems to be to
register the GPIO chip without a parent device
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rosen Penev [Wed, 19 Sep 2018 01:32:15 +0000 (18:32 -0700)]
mdadm: Install /etc/config file as 600
/etc/config/mdadm is only used by the init script which is ran as root.
There is no need for it to be readable by anything else.
Added PKG_CPE_ID for proper CVE tracking.
Small reorganization for consistency between Makefiles.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Wed, 19 Sep 2018 01:32:20 +0000 (18:32 -0700)]
fstools: Install mount.hotplug and 10-fstab.defaults as 600
Both of these are used by programs that run as root and nothing else.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Wed, 19 Sep 2018 01:32:19 +0000 (18:32 -0700)]
usbmode: Update modeswitch data to
20170806
Changed hotplug file to 600 as it is only read by procd, which runs as
root.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Wed, 19 Sep 2018 01:32:18 +0000 (18:32 -0700)]
trelay: Install hotplug and config files as 600
The hotplug file is ran by procd, which runs as root. The config file is
used by the init script, which also runs as root.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Wed, 19 Sep 2018 01:32:17 +0000 (18:32 -0700)]
dropbear: Install /etc/config as 600
/etc/config/dropbear is used by the init script which only runs as root.
Small whitespace change.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Wed, 19 Sep 2018 01:32:16 +0000 (18:32 -0700)]
lldpd: Install /etc/config file as 600
/etc/config/lldpd is only used by the init script, which only runs as root
Adjusted homepage and download URLs to use HTTPS.
-std=c99 is useful for GCC versions less than 6. Current OpenWrt uses 7.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Hans Dedecker [Wed, 19 Sep 2018 08:03:57 +0000 (10:03 +0200)]
netifd: update to latest git HEAD
23941d7 system-linux: enable by default ignore encaplimit for ip6 tunnels
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 17 Sep 2018 15:53:34 +0000 (17:53 +0200)]
map: drop default encaplimit value
Setting encaplimit to a numerical value results into the value being
included as tunnel encapsulation limit in the destination option header
for tunneled packets.
Several users have reported interop issues as not all ISPs support the
destination option header containing the tunnel encapsulation limit
resulting into broken map connectivity.
Therefore drop the default encaplimit value for map tunnels so
no destination option header is included by default.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Mon, 17 Sep 2018 09:24:39 +0000 (11:24 +0200)]
ds-lite: drop default encaplimit value
Setting encaplimit to a numerical value results into the value being
included as tunnel encapsulation limit in the destination option header
for tunneled packets.
Several users have reported interop issues as not all ISPs support the
destination option header containing the tunnel encapsulation limit
resulting into broken ds-lite connectivity.
Therefore drop the default encaplimit value for ds-lite tunnels so
no destination option header is included by default.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Jason A. Donenfeld [Tue, 18 Sep 2018 14:57:05 +0000 (16:57 +0200)]
wireguard: bump to 0.0.
20180918
* blake2s-x86_64: fix whitespace errors
* crypto: do not use compound literals in selftests
* crypto: make sure UML is properly disabled
* kconfig: make NEON depend on CPU_V7
* poly1305: rename finish to final
* chacha20: add constant for words in block
* curve25519-x86_64: remove useless define
* poly1305: precompute 5*r in init instead of blocks
* chacha20-arm: swap scalar and neon functions
* simd: add __must_check annotation
* poly1305: do not require simd context for arch
* chacha20-x86_64: cascade down implementations
* crypto: pass simd by reference
* chacha20-x86_64: don't activate simd for small blocks
* poly1305-x86_64: don't activate simd for small blocks
* crypto: do not use -include trick
* crypto: turn Zinc into individual modules
* chacha20poly1305: relax simd between sg chunks
* chacha20-x86_64: more limited cascade
* crypto: allow for disabling simd in zinc modules
* poly1305-x86_64: show full struct for state
* chacha20-x86_64: use correct cut off for avx512-vl
* curve25519-arm: only compile if symbols will be used
* chacha20poly1305: add __init to selftest helper functions
* chacha20: add independent self test
Tons of improvements all around the board to our cryptography library,
including some performance boosts with how we handle SIMD for small packets.
* send/receive: reduce number of sg entries
This quells a powerpc stack usage warning.
* global: remove non-essential inline annotations
We now allow the compiler to determine whether or not to inline certain
functions, while still manually choosing so for a few performance-critical
sections.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
Kevin Darbyshire-Bryant [Wed, 19 Sep 2018 06:37:53 +0000 (07:37 +0100)]
dnsmasq: Handle memory allocation failure in make_non_terminals()
Backport upstream commit:
ea6cc33 Handle memory allocation failure in make_non_terminals()
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Mike McCormack [Sat, 18 Aug 2018 06:04:57 +0000 (16:04 +1000)]
ucert: work around short read
usign occasionally writes 16 characters then exits without writing a LF,
leaving ucert hanging waiting for more input. Accept 16 characters
or more rather than 17 to work around the short read.
Signed-off-by: Mike McCormack <mike@atratus.org>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Koen Vandeputte [Mon, 17 Sep 2018 09:52:06 +0000 (11:52 +0200)]
kernel: bump 4.14 to 4.14.70
Refreshed all patches.
Added new patch:
- 192-Revert-ubifs-xattr-Don-t-operate-on-deleted-inodes.patch
This fixes a bug introduced in upstream 4.14.68 which caused targets using
ubifs to produce file-system errors on boot, rendering them useless.
Compile-tested on: cns3xxx, imx6, x86_64
Runtime-tested on: cns3xxx, imx6, x86_64
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Mon, 17 Sep 2018 09:48:49 +0000 (11:48 +0200)]
kernel: bump 4.9 to 4.9.127
Refreshed all patches.
Compile-tested on: ar71xx
Runtime-tested on: ar71xx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Mon, 17 Sep 2018 09:47:42 +0000 (11:47 +0200)]
kernel: bump 3.18 to 3.18.122
Refreshed all patches.
Compile-tested on: adm5120
Runtime-tested on: none
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Daniel Golle [Sat, 15 Sep 2018 17:16:52 +0000 (19:16 +0200)]
uqmi: pass-through ipXtable to child interfaces
Allow setting specific routing tables via the ip4table and ip6table
options also when ${ifname}_4 and ${ifname}_6 child interfaces are
being created.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Sat, 15 Sep 2018 13:49:31 +0000 (15:49 +0200)]
tools/e2fsprogs: fix build with clang
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Kevin Darbyshire-Bryant [Fri, 14 Sep 2018 20:52:39 +0000 (21:52 +0100)]
iproute2: q_cake: Also print nonat, nowash and no-ack-filter keywords
Pull in latest upstream tweaks:
Similar to the previous patch for no-split-gso, the negative keywords for
'nat', 'wash' and 'ack-filter' were not printed either. Add those as well.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Hannu Nyman [Fri, 14 Sep 2018 19:07:42 +0000 (22:07 +0300)]
busybox: update to 1.29.3
Update busybox to 1.29.3, minor bugfix release
https://git.busybox.net/busybox/log/?h=1_29_3
Signed-off-by: Hannu Nyman <hannu.nyman@iki.fi>
Hans Dedecker [Thu, 13 Sep 2018 07:26:44 +0000 (09:26 +0200)]
toolchain/glibc: update to latest 2.26 commit
c5c90b480e Fix segfault in maybe_script_execute.
174709d879 pthread_cond_broadcast: Fix waiters-after-spinning case [BZ #23538]
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Rosy Song [Wed, 12 Sep 2018 01:21:19 +0000 (09:21 +0800)]
odhcpd: enable ipv6 server mode only when it is supported
Signed-off-by: Rosy Song <rosysong@rosinson.com>
Kevin Darbyshire-Bryant [Wed, 12 Sep 2018 07:24:37 +0000 (08:24 +0100)]
iproute2: q_cake: Add printing of no-split-gso option
When the GSO splitting was turned into dual split-gso/no-split-gso options,
the printing of the latter was left out. Add that, so output is consistent
with the options passed
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Rafał Miłecki [Wed, 12 Sep 2018 06:40:03 +0000 (08:40 +0200)]
mac80211: brcmfmac: backport CYW89342 support & fixes from 4.20
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Kevin Darbyshire-Bryant [Wed, 12 Sep 2018 04:10:55 +0000 (05:10 +0100)]
kmod-sched-cake: fix 6in4/gso performance issue
Bump to latest upstream cake:
Add workaround for wrong skb->mac_len values after splitting GSO
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Florian Fainelli [Wed, 12 Sep 2018 00:19:51 +0000 (17:19 -0700)]
netifd: update to latest HEAD
0059335c5b60 CMakeList: Check that compiler supports -Wimplicit-fallthrough
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Marko Ratkaj [Mon, 10 Sep 2018 09:04:36 +0000 (11:04 +0200)]
tools/expat: fix docbook2man error on some systems
On some systems (Gentoo) configure stage fails because of docbook2man
working with SGML rather than with XML. We don't need xmlwf man pages so
we disable this.
Signed-off-by: Marko Ratkaj <marko.ratkaj@sartura.hr>
Jason A. Donenfeld [Tue, 11 Sep 2018 00:59:16 +0000 (18:59 -0600)]
wireguard: bump to 0.0.
20180910
* curve25519: arm: do not modify sp directly
* compat: support neon.h on old kernels
* compat: arch-namespace certain includes
* compat: move simd.h from crypto to compat since it's going upstream
This fixes a decent amount of compat breakage and thumb2-mode breakage
introduced by our move to Zinc.
* crypto: use CRYPTOGAMS license
Rather than using code from OpenSSL, use code directly from AndyP.
* poly1305: rewrite self tests from scratch
* poly1305: switch to donna
This makes our C Poly1305 implementation a bit more intensely tested and also
faster, especially on 64-bit systems. It also sets the stage for moving to a
HACL* implementation when that's ready.
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
John Crispin [Mon, 10 Sep 2018 15:50:40 +0000 (17:50 +0200)]
kernel: add missing symbol
Signed-off-by: John Crispin <john@phrozen.org>
Andy Walsh [Mon, 27 Aug 2018 12:19:55 +0000 (14:19 +0200)]
base-files: /etc/services: add missing 'rpcbind' alias
* add missing 'rpcbind' alias to /etc/services
Allows rpcbind to open its 111 port and be reachable via lan, this is the default behaviour.
Signed-off-by: Andy Walsh <andy.walsh44+github@gmail.com>
Tobias Wolf [Sun, 19 Aug 2018 11:04:02 +0000 (13:04 +0200)]
ramips: Fix early memory calculation for certain MIPS platforms
Kernel upstream commit
67a3ba25aa95 ("MIPS: Fix incorrect mem=X@Y handling") introduced a new issue for rt288x where "PHYS_OFFSET" is 0x0 but the calculated "ramstart" is not. As the prerequisite of custom memory map has been removed, this results in the full memory range of 0x0 - 0x8000000 to be marked as reserved
for this platform.
This patch adds the originally intended prerequisite again.
Signed-off-by: Tobias Wolf <dev-NTEO@vplace.de>
Sven Eckelmann [Mon, 3 Sep 2018 07:58:42 +0000 (09:58 +0200)]
ar71xx: Skip more hashed blocks for OM2P(-HS) 64k variant
The OM2P(-HS)v4 got a variant which uses a slightly different flash. The
standard versions used a flash with 256KB blocks which is no longer
available. The replacement flash uses a flash with 64K blocks.
The padding for the image rootfs is already for 64K and 256K and thus can
be flashed on the device without any problems. Unfortunately, the
bootloader will check $rootfs_size (rounded down to the nearest 64k block)
minus 1x 64k. But it is now possible that the new JFFS2 rootfs_data starts
even earlier and modifies the checked region. The check will then fail and
the backup image (when available) will be booted.
Just setting it to the same number of skipped blocks as other 64K models
avoids this problem.
Signed-off-by: Sven Eckelmann <sven.eckelmann@openmesh.com>
Daniel Engberg [Wed, 29 Aug 2018 06:58:44 +0000 (08:58 +0200)]
tools/expat: Update to 2.2.6
Update (lib)expat to 2.2.6
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Wed, 29 Aug 2018 07:01:54 +0000 (09:01 +0200)]
tools/e2fsprogs: Update to 1.44.4
Update e2fsprogs to 1.44.4
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Lech Perczak [Wed, 5 Sep 2018 17:40:16 +0000 (19:40 +0200)]
ath79: ubnt-xm: add rssileds package
In order to make RSSI indicator on the device work out of box,
include "rssileds" package in per-device rootfs image by default
for Ubiquiti XM family.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Lech Perczak [Wed, 5 Sep 2018 17:40:06 +0000 (19:40 +0200)]
ath79: ubnt-xm: create RSSI monitor on wlan0
When mapping for RSSI LEDs was defined for interface wlan0 on
Ubiquiti XM family, the mapping for rssileds monitor was omitted
by mistake. Therefore create the mapping, so RSSI LEDs work without
additional configuration, after starting rssileds service.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Bernhard Frauendienst [Sat, 18 Aug 2018 16:28:02 +0000 (18:28 +0200)]
ath79: add support for Buffalo WZR-HP-AG300H
Buffalo WZR-HP-AG300H is a dual band router based on
Qualcom Atheros AR7161 rev 2
Specification:
- 680 MHz CPU (Qualcomm Atheros AR7161)
- 128 MiB RAM (2x Samsung K4H511638G-LCCC)
- 32 MiB Flash (2x Winbond 25Q128BVFG)
- WiFi 5 GHz a/n (Atheros AR9220)
- WiFi 2.4 GHz b/g/n (Atheros AR9223)
- 1000Base-T WAN (Atheros AR7161)
- 4x 1000Base-T Switch (Atheros AR8316)
- 1x USB 2.0
- 3 Buttons (AOSS/WPS, Reset, USB Eject)
- 2 Slide switches (Router (on/off/auto), Movie Engine (on/off))
- 9 LEDs (Power green, WLAN 2GHz green, WLAN 2GHz amber,
WLAN 5GHz green, WLAN 5GHz LED amber, Router green,
Diag red, Movie Engine blue, USB green)
It is already supported by the ar71xx target.
For more information on the device visit the wiki:
<https://openwrt.org/toh/buffalo/wzr-hp-ag300h>
Serial console:
- The UART Header is next to Movie Engine Switch.
- Pinout is RX - TX - GND - 3.3V (Square Pad is 3.3V)
- The Serial setting is 115200-8-N-1.
Installation of OpenWRT from vendor firmware:
- Connect to the Web-interface at http://192.168.11.1
- Go to “Administration” → “Firmware Upgrade”
- Upload the OpenWrt factory image
Tested:
- Ethernet (LAN, WAN)
- WiFi
- Installation
- via TFTP rescue
- via factory image
- on firmware v1.77 (28-05-2012)
- on pro firmware v24SP2 r30356 (26-03-2018)
- via sysupgrade from ar71xx
(wlan devices don't work because of new names)
- via sysupgrade from itself
- Buttons
- LEDS
- USB (Power control and device recognition)
Signed-off-by: Bernhard Frauendienst <openwrt@nospam.obeliks.de>
Bernhard Frauendienst [Sat, 25 Aug 2018 10:48:54 +0000 (12:48 +0200)]
kernel: add driver for virtual mtd_concat devices
Some systems require multiple flash chips to be concatenated and read as
a single mtd device. The ar71xx target provides custom code to create
such mtdconcat devices. When porting devices to ath79, however, there is
no way to create such devices from within the device tree.
This commit adds a driver for creating virtual mtd-concat devices to the
ath79 target. Nodes must have a compatible = "virtual,mtd-concat" line,
and define a list of devices to concat in the 'devices' property,
for example:
flash {
compatible = "virtual,mtd-concat";
devices = <&flash0 &flash1>;
};
The driver is added to the very end of the mtd Makefile to increase the
likelyhood of all child devices already being loaded at the time of
probing, preventing unnecessary deferred probes which might in turn
cause other problems (like failure to load MAC addresses from art because
the partitions are not loaded yet).
Signed-off-by: Bernhard Frauendienst <openwrt@nospam.obeliks.de>
INAGAKI Hiroshi [Mon, 10 Sep 2018 07:30:28 +0000 (09:30 +0200)]
ath79: add support for ELECOM WRC-300GHBK2-I
ELECOM WRC-300GHBK2-I is a 2.4 GHz wireless router, based on Qualcomm
Atheros QCA9563.
Specification:
- Qualcomm Atheros QCA9563
- 64 MB of RAM (DDR2)
- 8 MB of Flash (SPI-NOR)
- 2T2R 2.4 GHz wifi
- SoC internal
- 5x 10/100/1000 Mbps Ethernet
- 3x LEDs, 4x keys(connected to GPIO: 3x)
- UART header on PCB
- TX, GND, RX, Vcc from ethernet port side
- 115200n8
Flash instruction using factory image:
1. Boot the WRC-300GHBK2-I normaly and connect the computer to its
LAN port
2. Access to "http://192.168.2.1/" and open firmware update page
("ファームウェア更新 手動更新（アップデート）")
3. Select the OpenWrt factory image and click apply ("適用") button
to perform firmware update
4. On the (initramfs) factory image, execute "mtd erase firmware" to
erase stock firmware and execute sysupgrade with squashfs-sysupgrade
image for WRC-300GHBK2-I
5. Wait ~150 seconds to complete flashing
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
INAGAKI Hiroshi [Mon, 10 Sep 2018 07:29:39 +0000 (09:29 +0200)]
firmware-utils: mkedimaximg: add "big-endianness mode" option
In addition to the default little-endianness format, I added a mode
so that we can generate firmware with big-endianness format.
example: ELECOM WRC-300GHBK2-I (QCA9563)
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Martin Schiller [Wed, 29 Aug 2018 13:06:21 +0000 (15:06 +0200)]
kernel: backport i2c-gpio working over slow can_sleep GPIOs
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Martin Schiller [Wed, 29 Aug 2018 09:13:42 +0000 (11:13 +0200)]
kernel: backport rtc ds1308 support to 4.9
Signed-off-by: Martin Schiller <ms@dev.tdt.de>
Eneas U de Queiroz [Wed, 1 Aug 2018 12:49:35 +0000 (12:49 +0000)]
libpcap: patch to add limits.h to pcap-usb-linux.c
The sender domain has a DMARC Reject/Quarantine policy which disallows
sending mailing list messages using the original "From" header.
To mitigate this problem, the original message has been wrapped
automatically by the mailing list software.
This is an upstream-applied patch that fixes 'PATH_MAX' and 'NAME_MAX'
undeclared when compiling on musl with CONFIG_PCAP_HAS_USB.
[
aafa351] pcap-usb-linux.c: add missing limits.h for musl systems.
Signed-off-by: Eneas U de Queiroz <cote2004-github@yahoo.com>
Rosen Penev [Sun, 9 Sep 2018 04:23:57 +0000 (21:23 -0700)]
mvebu: Replace RTC initialization patch with upstreamed version
While we're at it, rename the patches to their proper git format-patch
name.
Tested on a Turris Omnia.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Mon, 10 Sep 2018 01:55:43 +0000 (18:55 -0700)]
usbutils: Update usb.ids to 0.315
Referencing the version instead of revision should fix uscan.
Tested on Turria Omnia.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Christian Lamparter [Tue, 4 Sep 2018 21:27:02 +0000 (23:27 +0200)]
ath79: add support for WD My Net Wi-Fi Range Extender
This patch ports over support for the device from ar71xx.
SOC: AR7370 (Wasp - AR9344 rev2
0001974c)
RAM: Winbond W9725G6KB-25 32MiB
FLASH: Winbond 25Q64FVSIG 8MiB
WLAN: AR9380 Dual-Band 802.11abgn 3x3:3
INPUT: WPS, RESET button (hardware on/off toggle button)
LED: Power, LAN, WiFi, 3 RSSI-Leds (low, medium, high)
Serial: Header Next to the winbond flash chip (labeld JP1)
Pinout is GND - NC - RX - TX - 3V3 (JP1)
The Serial setting is 115200-8-N-1.
- Installation via uboot's upgrade command
0. attach serial cable
1. interrupt uboot and enter "upgrade code.bin" into
the u-boot prompt
ar7240> upgrade code.bin
2. rename openwrt...sysupgrade.bin to code.bin on PC
3. run a tftp-client on the PC
(shell)$ tftp 192.168.1.230
binary
put code.bin
4. wait for the device to finish
[...]
Copy buff to Flash from 0x9f040000 length 0x79f000
Copy to Flash... write addr:
9f040000
done
5. enter "go" in the u-boot prompt
ar7240> go
- TFTP ramdisk image boot from the uboot prompt
(tftp server defaults to serverip 192.168.1.254)
=> tftpboot
81000000 initramfs.bin
=> bootm
Tested and working:
- LEDs
- Buttons
- Ethernet
- Wi-Fi
- OpenWRT sysupgrade
For flashing and debricking information see:
<https://openwrt.org/toh/wd/rext>
Users coming from ar71xx can use sysupgrade too. But I highly
advise to no save the old configuration and start from a clean
state.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Christian Lamparter [Tue, 4 Sep 2018 21:27:01 +0000 (23:27 +0200)]
ath79: port cybertan_part from ar71xx
This patch ports the cybertan_part code from ar71xx and converts the
driver to a DT-supported mtd parser. As a result, it will no longer
add the u-boot, nvram and art partitions, which were never part of
the special Cybertan header.
Instead these partitions have to be specified in the DT, which has the
upside of making it possible to add properties (i.e.: read-only), labels
and references to these important partitions.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Rafał Miłecki [Tue, 4 Sep 2018 13:20:34 +0000 (15:20 +0200)]
mac80211: add iw command wrapper with error logging
Currently it's close to impossible to tell what part of mac80211 setup
went wrong. Errors logged into system log look like this:
radio0 (6155): command failed: No error information (-524)
radio0 (6155): command failed: Not supported (-95)
radio0 (6155): command failed: I/O error (-5)
radio0 (6155): command failed: Too many open files in system (-23)
With this commit change it's getting clear:
command failed: No error information (-524)
Failed command: iw dev wlan0 del
command failed: Not supported (-95)
Failed command: iw phy phy0 set antenna_gain 0
command failed: I/O error (-5)
Failed command: iw phy phy0 set distance 0
command failed: Too many open files in system (-23)
Failed command: iw phy phy0 interface add wlan0 type __ap
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rosen Penev [Sun, 2 Sep 2018 02:06:54 +0000 (19:06 -0700)]
hostapd: Fix compile with OpenSSL 1.1.0 + no deprecated APIs
Patch was accepted upsteam:
https://w1.fi/cgit/hostap/commit/?id=
373c796948599a509bad71695b5b72eef003f661
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Luis Araneda [Sat, 1 Sep 2018 05:36:09 +0000 (02:36 -0300)]
zynq: rename zedboard with correct manufacturer
The board is made by Avnet, so rename it accordingly as
upstream has done it
Also move the device to maintain alphabetic order
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Luis Araneda [Tue, 4 Sep 2018 01:40:02 +0000 (22:40 -0300)]
zynq: add sdcard image support
Implement the generation of sdcard images with ext4 or
squashfs + f2fs overlay, but only enable the latter
automatically
Additionally, add mkf2fs and e2fsprogs to default packages
to manipulate ext4 and f2fs filesystems
Finally, disable the automatic generation of initramfs
and rootfs.tar.gz images, as they are no longer required
(they can still be selected in menuconfig)
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Luis Araneda [Tue, 4 Sep 2018 01:40:01 +0000 (22:40 -0300)]
zynq: enable kernel overlay and f2fs support
Select configs to enable build-in F2FS support
and use the overlayfs provided by generic config
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Luis Araneda [Tue, 4 Sep 2018 01:40:00 +0000 (22:40 -0300)]
zynq: remove bootargs from kernel config
Use options from generic instead of target-specific,
as the bootargs are now passed by the bootloader
and can be device-specific
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Luis Araneda [Tue, 4 Sep 2018 01:39:59 +0000 (22:39 -0300)]
uboot-zynq: use a file to modify the default environment
Follow the strategy of other targets and create a
default environment file, uEnv.txt, to configure the
behavior of U-Boot.
For now, use it to pass bootargs to the kernel
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Luis Araneda [Tue, 4 Sep 2018 01:39:58 +0000 (22:39 -0300)]
uboot-zynq: copy U-Boot images to STAGING_DIR
Create a directory inside STAGING_DIR and copy U-Boot
output images, so they can be used later when creating the
sdcard image
Additionally, like others targets, override the default
install method to avoid copying the images to bin directory
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Luis Araneda [Tue, 4 Sep 2018 01:39:57 +0000 (22:39 -0300)]
uboot-zynq: automatically select the appropriate variant
Select the U-Boot variant automatically based on the
current selected device, and hide the package from
menuconfig
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Luis Araneda [Tue, 4 Sep 2018 01:39:56 +0000 (22:39 -0300)]
uboot-zynq: remove ZC706 board
The board was added when creating the target, but the
corresponding device was never defined inside the target
Signed-off-by: Luis Araneda <luaraneda@gmail.com>
Hans Dedecker [Sun, 9 Sep 2018 19:46:43 +0000 (21:46 +0200)]
dnsmasq: bump to dnsmasq 2.80test6
Refresh patches
Changes since latest bump:
af3bd07 Man page typo.
d682099 Picky changes to
47b45b2967c931fed3c89a2e6a8df9f9183a5789
47b45b2 Fix lengths of interface names
2b38e38 Minor improvements in lease-tools
282eab7 Mark die function as never returning
c346f61 Handle ANY queries in context of
da8b6517decdac593e7ce24bde2824dd841725c8
03212e5 Manpage typo.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Daniel Engberg [Sun, 9 Sep 2018 11:17:28 +0000 (13:17 +0200)]
tools/cmake: Update to 3.12.2
Update CMake to 3.12.2
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Sun, 9 Sep 2018 11:21:00 +0000 (13:21 +0200)]
curl: Update to 7.61.1
Update curl to 7.61.1
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Yousong Zhou [Thu, 6 Sep 2018 08:00:24 +0000 (08:00 +0000)]
scripts/ipkg-build: quash error messages when conffiles.resolved is empty
When Package/xx/conffiles only contains directories that are empty at
package time, conffiles.resolved will be missing and the following
error messages will appear in the build log.
/home/yousong/git-repo/openwrt/openwrt/scripts/ipkg-build -c -o 0 -g 0 /home/yousong/git-repo/openwrt/openwrt/build_dir/target-mips_24kc_musl/linux-malta_be/openvswitch-2.10.0/ipkg-mips_24kc/openvswitch-common /home/yousong/git-repo/openwrt/openwrt/bin/packages/mips_24kc/packages
mv: cannot stat 'CONTROL/conffiles.resolved': No such file or directory
chmod: cannot access 'CONTROL/conffiles': No such file or directory
It will not break the ipkg-build process. The change is merely cosmetic
to not cause confusion when reading logs
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Yousong Zhou [Wed, 5 Sep 2018 15:29:25 +0000 (15:29 +0000)]
scripts/metadata.pm: avoid adding dup names in provides list
The need arises from building Open vSwitch kernel datapath modules, e.g.
- kmod-openvswitch from Linux upstream
- kmod-openvswitch-intree from openvswitch source code
where both provides virtual package "kmod-openvswitch" for userspace
packages to select and depend on
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
pacien [Thu, 6 Sep 2018 13:56:17 +0000 (15:56 +0200)]
odhcp6c: add client fqdn and reconfigure options
Allowing DHCPV6_CLIENT_FQDN and DHCPV6_ACCEPT_RECONFIGURE to be turned off.
Defaulting to false, former behavior remains unchanged.
Signed-off-by: pacien <pacien.trangirard@pacien.net>
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com> [PKG_RELEASE increase]
Koen Vandeputte [Thu, 30 Aug 2018 17:09:46 +0000 (19:09 +0200)]
ar71xx: fix switch probing on kernel 4.14
The bump to 4.14 changed the way mdio probes behind switches.
While the board_info is added to the list, the code that actually inserted
the list info into the phydev structure was missing.
This resulted in non-working ethernet ports.
Re-add it to fix switch probing.
This mimics the exact behaviour as it was in kernel 4.9.
Before:
[ 1.066007] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
[ 1.073409] Atheros AR8216/AR8236/AR8316: probe of ag71xx-mdio.0:00 failed with error -22
[ 1.102455] libphy: ag71xx_mdio: probed
[ 1.737938] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=
004dd034, driver=Generic PHY]
[ 1.747994] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[ 2.377642] ag71xx-mdio.1: Found an AR934X built-in switch
[ 2.429938] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
After:
[ 11.163357] libphy: Fixed MDIO Bus: probed
[ 11.319898] libphy: ag71xx_mdio: probed
[ 11.360844] switch0: Atheros AR8327 rev. 4 switch registered on ag71xx-mdio.0
[ 12.447398] libphy: ag71xx_mdio: probed
[ 13.077402] ag71xx ag71xx.0: connected to PHY at ag71xx-mdio.0:00 [uid=
004dd034, driver=Atheros AR8216/AR8236/AR8316]
[ 13.088989] eth0: Atheros AG71xx at 0xb9000000, irq 4, mode:RGMII
[ 13.717716] ag71xx-mdio.1: Found an AR934X built-in switch
[ 13.769990] eth1: Atheros AG71xx at 0xba000000, irq 5, mode:GMII
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Thu, 6 Sep 2018 12:44:17 +0000 (14:44 +0200)]
gdb: bump to 8.2
*** Changes in GDB 8.2
Support for the following target has been added:
RiscV ELF (riscv*-*-elf)
Support for following targets and native configurations has been removed:
m88k running OpenBSD (m88*-*-openbsd*)
SH-5/SH64 ELF (sh64-*-elf*)
SH-5/SH64 (sh*)
SH-5/SH64 running GNU/Linux (sh*-*-linux*)
SH-5/SH64 running OpenBSD (sh*-*-openbsd*)
Various Python API enhancements
Aarch64/Linux enhancements:
SVE support.
Hardware watchpoints improvements for entities stored at unaligned addresses.
New "c" response to disable the pager for the rest of the current command.
C expressions can now use _Alignof, and C++ expressions can now use alignof.
Improved flexibility for loading symbol files.
The 'info proc' command nows works on running processes on FreeBSD systems as well as core files created on FreeBSD systems.
A new --enable-codesign=CERT configure option to automatically codesign GDB after build (useful on MacOS X).
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Thu, 6 Sep 2018 12:43:56 +0000 (14:43 +0200)]
toolchain/gdb: bump to 8.2
*** Changes in GDB 8.2
Support for the following target has been added:
RiscV ELF (riscv*-*-elf)
Support for following targets and native configurations has been removed:
m88k running OpenBSD (m88*-*-openbsd*)
SH-5/SH64 ELF (sh64-*-elf*)
SH-5/SH64 (sh*)
SH-5/SH64 running GNU/Linux (sh*-*-linux*)
SH-5/SH64 running OpenBSD (sh*-*-openbsd*)
Various Python API enhancements
Aarch64/Linux enhancements:
SVE support.
Hardware watchpoints improvements for entities stored at unaligned addresses.
New "c" response to disable the pager for the rest of the current command.
C expressions can now use _Alignof, and C++ expressions can now use alignof.
Improved flexibility for loading symbol files.
The 'info proc' command nows works on running processes on FreeBSD systems as well as core files created on FreeBSD systems.
A new --enable-codesign=CERT configure option to automatically codesign GDB after build (useful on MacOS X).
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Tue, 4 Sep 2018 13:09:48 +0000 (15:09 +0200)]
mac80211: backport upstream fixes
Backport most significant upstream fixes (excl. hwsim fixes)
Refreshed all patches.
Contains important fixes for CSA (Channel Switch Announcement)
and A-MSDU frames.
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Thu, 6 Sep 2018 12:25:15 +0000 (14:25 +0200)]
kernel: bump 4.14 to 4.14.68
Refreshed all patches.
Remove upstream accepted:
- 330-Revert-MIPS-BCM47XX-Enable-74K-Core-ExternalSync-for.patch
Altered:
- 303-v4.16-netfilter-nf_tables-remove-multihook-chains-and-fami.patch
- 308-mips32r2_tune.patch
Compile-tested on: cns3xxx, imx6
Runtime-tested on: cns3xxx, imx6
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Thu, 6 Sep 2018 12:23:27 +0000 (14:23 +0200)]
kernel: bump 4.9 to 4.9.125
Refreshed all patches.
Compile-tested on: ar71xx
Runtime-tested on: ar71xx
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Koen Vandeputte [Thu, 6 Sep 2018 12:21:05 +0000 (14:21 +0200)]
kernel: bump 3.18 to 3.18.121
Refreshed all patches.
Compile-tested on: adm5120
Runtime-tested on: none
Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
Carlo Nel [Sun, 26 Aug 2018 19:11:59 +0000 (21:11 +0200)]
ramips: add support for TP-Link TL-MR3020 v3
TP-Link TL-MR3020 v3 is a pocket-size router based on MediaTek MT7628N.
This PR is based on the work of @meyergru[1], with his permission.
Specification:
- MediaTek MT7628N/N (575 Mhz)
- 64 MB of RAM
- 8 MB of FLASH
- 2T2R 2.4 GHz
- 1x 10/100 Mbps Ethernet
Flash instruction:
The only way to flash the image in TL-MR3020 v3 is to use
tftp recovery mode in U-Boot:
1. Configure PC with static IP 192.168.0.225/24 and tftp server.
2. Rename "openwrt-ramips-mt76x8-tplink_tl-mr3020-v3-squashfs-tftp-recovery.bin"
to "tp_recovery.bin" and place it in tftp server directory.
3. Connect PC with the LAN port, press the reset button, power up
the router and keep button pressed for around 6-7 seconds, until
device starts downloading the file.
4. Router will download file from server, write it to flash and reboot.
[1] https://github.com/meyergru/lede-source/commits/TL-MR3020-V3
Signed-off-by: Carlo Nel <carlojnel@gmail.com>
Matt Merhar [Thu, 30 Aug 2018 12:58:26 +0000 (08:58 -0400)]
ath79: fix unaligned access panic in ag71xx_mdio_probe
Without "syscon" being present in an ag71xx ethernet DT node's
compatible property, a panic occurs at boot during probe citing
"Unhandled kernel unaligned access".
With this modification, the panic no longer occurs and instead the probe
simply fails, allowing the boot process to continue.
Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
Matt Merhar [Thu, 30 Aug 2018 00:14:19 +0000 (20:14 -0400)]
ath79: add syscon compatible property to ar7100 ethernet nodes
This adds "syscon" to the compatible properties for the eth0/eth1 nodes
in ar7100.dtsi.
Without this, a kernel panic is encountered on boot with some ar7100
boards. This for some reason wasn't an issue for the WNDR3800, which
uses a Realtek switch chipset, but the panic was encountered on the
RouterStation Pro (using an AR8216 switch) and some other boards that
haven't yet been merged.
The panic message mentions an unaligned access and happens in
ag71xx_mdio_probe in drivers/net/ethernet/atheros/ag71xx/ag71xx_mdio.c.
Even if the unaligned access is fixed, the ag71xx_mdio probe still fails
without the "syscon" property.
This was already being worked around in
ar7161_ubnt_routerstation-pro.dts by overriding the compatible property,
so this commit removes that as well.
All of the other ath79 .dtsi already have this property, so no changes
are needed elsewhere.
Signed-off-by: Matt Merhar <mattmerhar@protonmail.com>
projects / openwrt / staging / linusw.git / log