Christian Marangi [Tue, 18 Oct 2022 23:09:53 +0000 (01:09 +0200)]
ipq806x: 6.1: manually refresh kernel patches
Refresh kernel patches for version 6.1.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 18 Oct 2022 21:49:18 +0000 (23:49 +0200)]
ipq806x: 6.1: replace ZRELADDR HACK patch with new version
With 6.1 lots have changed and the platform for Makefile.boot got
dropped. Replace the patch with a new version that is alligned to the
new implementation.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 18 Oct 2022 21:48:45 +0000 (23:48 +0200)]
ipq806x: 6.1: drop upstream patch
Drop patch that got merged upstream.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 18 Oct 2022 21:46:43 +0000 (23:46 +0200)]
ipq806x: 6.1: copy patches, files and config from 5.15
Copy patches, files and config from 5.15 kernel version.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Robert Marko [Wed, 26 Oct 2022 11:27:51 +0000 (13:27 +0200)]
kernel: modules: fs: adapt for kernel 6.1
Adapt filesystem kmods for building under kernel 6.1:
* Depend on kernel not being 5.10 rather than only 5.15
* kmod-fs-9p depends on kmod-fs-netfs from 5.17 as they started using
netfs helpers
* Set new KConfig options to N
Signed-off-by: Robert Marko <robimarko@gmail.com>
Robert Marko [Fri, 21 Oct 2022 11:08:35 +0000 (13:08 +0200)]
kernel: modules: wwan: adapt for kernel 6.1
Update the WWAN kmods for compilation under kernel 6.1:
* Depend on kernel not being 5.10 rather than only 5.15
* Enable CONFIG_WWAN_DEBUGFS as its now optional from 5.17
* Add missing symbols for new WWAN drivers to generic config
Signed-off-by: Robert Marko <robimarko@gmail.com>
Christian Marangi [Thu, 20 Oct 2022 01:13:50 +0000 (03:13 +0200)]
kernel: modules: adapt for kernel 6.1
Adapt kernel modules to support kernel 6.1.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Pawel Dembicki [Tue, 18 Apr 2023 08:28:33 +0000 (10:28 +0200)]
generic: kernel: add missing symbol
Add missing symbol while adding layerscape support
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
[ add commit description ]
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Robert Marko [Wed, 26 Oct 2022 11:26:14 +0000 (13:26 +0200)]
generic: 6.1: add missing symbols
These symbols got exposed once building for ipq807x.
Signed-off-by: Robert Marko <robimarko@gmail.com>
Christian Marangi [Tue, 18 Oct 2022 21:45:09 +0000 (23:45 +0200)]
generic: 6.1: refresh config and add missing symbols
Refresh generic config for 6.1 and add missing symbols.
Then sorted using:
$ ./scripts/kconfig.pl '+' target/linux/generic/config-6.1 /dev/null > target/linux/generic/config-6.1-new
$ mv target/linux/generic/config-6.1-new target/linux/generic/config-6.1
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 18 Oct 2022 22:03:17 +0000 (00:03 +0200)]
kernel: add CONFIG_INITRAMFS_PRESERVE_MTIME config to Initramfs function
New kernel version 6.1 introduced new INITRAMFS option. Add them to the
Initramfs functions to correctly compile initramfs images.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 22 May 2023 13:08:40 +0000 (15:08 +0200)]
kernel: use eth_random_addr instead of random_ether_addr
random_ether_addr is just a reference to eth_random_addr, that was later
dropped in more recent kernel version.
Drop random_ether_addr and use eth_random_addr directly to fix
compilation error in 6.1
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 22 May 2023 00:34:20 +0000 (02:34 +0200)]
kernek: use struct_group to wipe ar8216 volatile priv data
Instead of reference vlan and do strange subtraction, use the handy
struct_group() to create a virtual struct of the same size of the
members. This permits to have a more secure memset and fix compilation
warning in 6.1 where additional checks are done.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 20 Oct 2022 00:20:17 +0000 (02:20 +0200)]
kernel: refresh swconfig_leds to handle new trigger locking
Refresh swconfig_leds source to handle new trigger locking that is now a
spinlock.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Wed, 19 Oct 2022 21:48:42 +0000 (23:48 +0200)]
kernel: refresh IFF_NO_IP_ALIGN ifdef for kernel >= 6.1
Kernel 6.1 expanded the priv_flags to long bitmap so update and restore
it to priv_flags.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 22 May 2023 16:07:49 +0000 (18:07 +0200)]
generic: 6.1: refresh pending patches
Refresh pending patches with make target/linux/refresh.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 22 May 2023 16:07:13 +0000 (18:07 +0200)]
generic: 6.1: refresh hack patches
Refresh hack patches with make target/linux/refresh.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 22 May 2023 16:06:14 +0000 (18:06 +0200)]
generic: 6.1: refresh backport patches
Refresh backport patches with make target/linux/refresh.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 18 Oct 2022 23:12:04 +0000 (01:12 +0200)]
generic: 6.1: add pending OPP set opp improvement patch
Add pending OPP set opp improvement patch to better handle _set_opp
function in clock scaling.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Thu, 20 Oct 2022 01:45:31 +0000 (03:45 +0200)]
generic: 6.1: add patch to compile ieee8211 headers
With kernel 6.1 ieee2111_ptr is not compiled by default. Add pending
patch to restore this to make backports project compatible.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 22 May 2023 00:36:35 +0000 (02:36 +0200)]
generic: 6.1: manually refresh mglru patch with new kernel version
Refresh mglru patch for new kernel version due to very fun backport
changing name from folio to pages.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 18 Oct 2022 21:43:43 +0000 (23:43 +0200)]
generic: 6.1: manually refresh hack patches
Refresh hack patches for kernel 6.1.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 22 May 2023 00:41:47 +0000 (02:41 +0200)]
generic: 6.1: drop pending patch backported as fixes
Drop pending patch backported as fixes in later kernel version.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 18 Oct 2022 21:24:43 +0000 (23:24 +0200)]
generic: 6.1: manually refresh pending patches
Refresh pending patches for kernel 6.1.
Changes:
- Refresh mtd patches with new implementation.
- Change 191-rtc-rs5c372-let_the_alarm_to_be_used_as_wakeup_source as
uie_unsupported got dropped and we now set the bit directly.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 18 Oct 2022 22:56:57 +0000 (00:56 +0200)]
generic: 6.1: manually refresh backport patches
Refresh backport patches that still needs to be merged for kernel 6.1.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 18 Oct 2022 20:49:57 +0000 (22:49 +0200)]
generic: 6.1: drop backport patches
Drop all backport patches that are now included in kernel 6.1.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 18 Oct 2022 20:26:34 +0000 (22:26 +0200)]
generic: copy backport, hack, pending patch and config from 5.15 to 6.1
Copy backport, hack, pending patch and config from 5.15 to 6.1.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 18 Oct 2022 20:24:40 +0000 (22:24 +0200)]
kernel: add define for kernel 6.1
Add define for kernel 6.1.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Nick Hainke [Sun, 21 May 2023 21:54:31 +0000 (23:54 +0200)]
busybox: update to 1.36.1
Release Notes:
http://lists.busybox.net/pipermail/busybox-cvs/2023-May/041510.html
Refresh commands, run after busybox is first built once (nothing changed
compared to 1.36.0):
cd package/utils/busybox/config/
../convert_menuconfig.pl ../../../../build_dir/target-mipsel_24kc_musl/busybox-default/busybox-1.36.1
cd ..
./convert_defaults.pl ../../../build_dir/target-mipsel_24kc_musl/busybox-default/busybox-1.36.1/.config > Config-defaults.in
Manual edits needed afterward:
* Config-defaults.in: OpenWrt config symbol IPV6 logic applied to
BUSYBOX_DEFAULT_FEATURE_IPV6
* Config-defaults.in: OpenWrt config TARGET_bcm53xx logic applied to
BUSYBOX_DEFAULT_TRUNCATE (commit
547f1ec)
* Config-defaults.in: OpenWrt logic applied to
BUSYBOX_DEFAULT_LOGIN_SESSION_AS_CHILD (commit
dc92917)
* Config-defaults.in: correct the default ports that get reset
BUSYBOX_DEFAULT_FEATURE_HTTPD_PORT_DEFAULT 80
BUSYBOX_DEFAULT_FEATURE_TELNETD_PORT_DEFAULT 23
* config/editors/Config.in: Add USE_GLIBC dependency to
BUSYBOX_CONFIG_FEATURE_VI_REGEX_SEARCH (commit
f141090)
* config/shell/Config.in: change at "Options common to all shells" the conditional symbol
SHELL_ASH --> BUSYBOX_CONFIG_SHELL_ASH
(discussion in http://lists.openwrt.org/pipermail/openwrt-devel/2021-January/033140.html
Apparently our script does not see the hidden option while
prepending config options with "BUSYBOX_CONFIG_" which leads to a
missed dependency when the options are later evaluated.)
* Edit a few Config.in files by adding quotes to sourced items in
config/Config.in, config/networking/Config.in and config/util-linux/Config.in (commit
1da014f)
Tested-by: Hannu Nyman <hannu.nyman@iki.fi>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sun, 21 May 2023 21:21:14 +0000 (23:21 +0200)]
libxml2: update to 2.11.4
Release Notes:
https://gitlab.gnome.org/GNOME/libxml2/-/releases/v2.11.4
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sun, 21 May 2023 21:25:52 +0000 (23:25 +0200)]
libcap: update to 2.69
Release Notes:
https://sites.google.com/site/fullycapable/release-notes-for-libcap#h.iuvg7sbjg8pe
Fixes: CVE-2023-2602 CVE-2023-2603
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sun, 21 May 2023 21:36:01 +0000 (23:36 +0200)]
lldpd: update to 1.0.17
Release Notes:
https://github.com/lldpd/lldpd/releases/tag/1.0.17
Signed-off-by: Nick Hainke <vincent@systemli.org>
Pietro Ameruoso [Mon, 22 May 2023 07:52:47 +0000 (09:52 +0200)]
mediatek: add support for Zyxel EX5601-T0 router
Zyxel EX5601-T0 specifics
--------------
The operator specific firmware running on the Zyxel branded
EX5601-T0 includes U-Boot modifications affecting the OpenWrt
installation.
Partition Table
| dev | size | erasesize | name |
| ---- | -------- | --------- | ------------- |
| mtd0 |
20000000 |
00040000 | "spi0.1" |
| mtd1 |
00100000 |
00040000 | "BL2" |
| mtd2 |
00080000 |
00040000 | "u-boot-env" |
| mtd3 |
00200000 |
00040000 | "Factory" |
| mtd4 |
001c0000 |
00040000 | "FIP" |
| mtd5 |
00040000 |
00040000 | "zloader" |
| mtd6 |
04000000 |
00040000 | "ubi" |
| mtd7 |
04000000 |
00040000 | "ubi2" |
| mtd8 |
15a80000 |
00040000 | "zyubi" |
The router boots BL2 which than loads FIP (u-boot).
U-boot has hardcoded a command to always launch Zloader "mtd read zloader 0x46000000" and than "bootm". Bootargs are deactivated.
Zloader is the zyxel booloader which allow to dual-boot ubi or ubi2, by default access to zloader is blocked.
Too zloader checks that the firmware contains a particolar file called zyfwinfo.
Additional details regarding Zloader can be found here:
https://hack-gpon.github.io/zyxel/
https://forum.openwrt.org/t/adding-openwrt-support-for-zyxel-ex5601-t0/155914
Hardware
--------
SOC: MediaTek MT7986a
CPU: 4 core cortex-a53 (2000MHz)
RAM: 1GB DDR4
FLASH: 512MB SPI-NAND (Micron xxx)
WIFI: Wifi6 Mediatek MT7976 802.11ax 5 GHz 4x4 + 2.4GHZ 4x4
ETH: MediaTek MT7531 Switch + SoC
3 x builtin 1G phy (lan1, lan2, lan3)
1 x MaxLinear GPY211B 2.5 N-Base-T phy5 (lan4)
1 x MaxLinear GPY211B 2.5Gbit xor SFP/N-Base-T phy6 (wan)
USB: 1 x USB 3.2 Enhanced SuperSpeed port
UART: 3V3 115200 8N1 (Pinout: GND KEY RX TX VCC)
VOIP: 2 FXS ports for analog phones
MAC Address Table
-----------------
eth0/lan Factory 0x002a
eth1/wan Factory 0x0024
wifi 2.4Ghz Factory 0x0004
wifi 5Ghz Factory 0x0004 + 1
Serial console (UART)
---------------------
+-------+-------+-------+-------+-------+
| +3.3V | RX | TX | KEY | GND |
+---+---+-------+-------+-------+-------+
|
+--- Don't connect
Installation
------------
Keep in mind that openwrt can only run on the UBI partition, the openwrt firmware is not able to understand the zloader bootargs.
The procedure allows restoring the UBI partition with the Zyxel firmware and retains all the OEM functionalities.
1. Unlock Zloader (this will allow to swap manually between partitions UBI and UBI2):
- Attach a usb-ttl adapter to your computer and boot the router.
- While the router is booting at some point you will read the following: `Please press Enter to activate this console.`
- As soon as you read that press enter, type root and than press enter again (just do it, don't care about the logs scrolling).
- Most likely the router is still printing the boot log, leave it boot until it stops.
- If everything went ok you should have full root access "root@EX5601-T0:/#".
- Type the following command and press enter: "fw_setenv EngDebugFlag 0x1".
- Reboot the router.
- As soon as you read `Hit any key to stop autoboot:` press Enter.
- If everything went ok you should have the following prompt: "ZHAL>".
- You have successfully unlocked zloader access, this procedure must be done only once.
2. Check the current active partition:
- Boot the router and repeat the steps above to gain root access.
- Type the following command to check the current active image: "cat /proc/cmdline".
- If `rootubi=ubi` it means that the active partition is `mtd6`
- If `rootubi=ubi2` it means that the active partition is `mtd7`
- As mentioned earlier we need to flash openwrt into ubi/mtd6 and never overwrite ubi2/mtd7 to be able to fully roll-back.
- To activate and boot from mtd7 (ubi2) enter into ZHAL> command prompt and type the following commands:
atbt 1 # unlock write
atsw # swap boot partition
atsr # reboot the router
- After rebooting check again with "cat /proc/cmdline" that you are correctly booting from mtd7/ubi2
- If yes proceed with the installation guide. If not probably you don't have a firmware into ubi2 or you did something wrong.
3. Flashing:
- Download the sysupgrade file for the router from openwrt, than we need to add the zyfwinfo file into the sysupgrade tar.
Zloader only checks for the magic (which is a fixed value 'EXYZ') and the crc of the file itself (256bytes).
I created a script to create a valid zyfwinfo file but you can use anything that does exactly the same:
https://raw.githubusercontent.com/pameruoso/OpenWRT-Zyxel-EX5601-T0/main/gen_zyfwinfo.sh
- Add the zyfwinfo file into the sysupgrade tar.
- Enter via telnet or ssh into the router with admin credentials
- Enter the following commands to disable the firmware and model checks
"zycli fwidcheck off" and "zycli modelcheck off"
- Open the router web interface and in the update firmware page select the "restore default settings option"
- Select the sysupgrade file and click on upload.
- The router will flash and reboot itself into openwrt from UBI
4. Restoring and going back to Zyxel firmware.
- Use the ZHAL> command line to manually swap the boot parition to UBI2 with the following:
atbt 1 # unlock write
atsw # swap boot partition
atsr # reboot the router
- You will boot again the Zyxel firmware you have into UBI2 and you can flash the zyxel firmware to overwrite the UBI partition and openwrt.
Working features
----------------
3 gbit lan ports
Wifi
Zyxel partitioning for coexistance with Zloader and dual boot.
WAN SFP port (only after exporting pins 57 and 10. gpiobase411)
leds
reset button
serial interface
usb port
lan ethernet 2.5 gbit port (autosense)
wan ethernet 2.5 gbit port (autosense)
Not working
----------------
voip (missing drivers or proper zyxel platform software)
Swapping the wan ethernet/sfp xor port
----------------
The way to swap the wan port between sfp and ethernet is the following:
export the pins 57 and 10.
Pin 57 is used to probe if an sfp is present.
If pin 57 value is 0 it means that an sfp is present into the cage (cat /sys/class/gpio/gpio468/value).
If pin 57 value is 1 it means that no sfp is inserted into the cage.
In conclusion by default both 57 an 10 pins are by default 1, which means that the active port is the ethernet one.
After inserting an SFP pin 57 will become 0 and you have to manually change the value of pin 10 to 0 too.
This is totally scriptable of course.
Leds description
------------
All the leds are working out of the box but the leds managed by the 2 maxlinear phy (phy 5 lan, phy6 wan).
To activate the phy5 led (rj45 ethernet port led on the back of the router) you have to use mdio-tools.
To activate the phy6 led (led on the front of the router for 2.5gbit link) you have to use mdio-tools.
Example:
Set lan5 led to fast blink on 2500/1000, slow blink on 10/100:
mdio mdio-bus mmd 5:30 raw 0x0001 0x33FC
Set wan 2.5gbit led to constant on when wan is 2.5gbit:
mdio mdio-bus mmd 6:30 raw 0x0001 0x0080
Signed-off-by: Pietro Ameruoso <p.ameruoso@live.it>
Christian Marangi [Mon, 22 May 2023 14:47:08 +0000 (16:47 +0200)]
CI: rework build workflow to have split target and subtarget directly
Instead of referring to a redundant job and ENV variables, rework build
workflow to accept and require split target and subtarget and use them
directly from inputs.
Rework each user and pass a JSON of tuple to matrix include with each
target/subtarget combination to test. Special notice this doesn't use
the github actions matrix combination feature but reference each
specific tuple of target and subtarget to test.
Just a cleanup no behaviour change intended.
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Mon, 22 May 2023 13:27:48 +0000 (15:27 +0200)]
CI: check-kernel-patches: use buildbot user on git diff check
Use buildbot user on git diff check instead of using git config
safe directory.
This should accomplish the same result but should be a better approach
following safe practice enforced by git.
Fixes: a7747e8670cb ("ci: fix check kernel patches job")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Shiji Yang [Fri, 5 May 2023 01:50:36 +0000 (01:50 +0000)]
ath79: add support for D-Link DIR-859 A3
Specifications:
SOC: QCA9563 775 MHz + QCA9880
Switch: QCA8337N-AL3C
RAM: Winbond W9751G6KB-25 64 MiB
Flash: Winbond W25Q128FVSG 16 MiB
WLAN: Wi-Fi4 2.4 GHz 3*3 + 5 GHz 3*3
LAN: LAN ports *4
WAN: WAN port *1
Buttons: reset *1 + wps *1
LEDs: ethernet *5, power, wlan, wps
MAC Address:
use address source1 source2
label 40:9b:xx:xx:xx:3c lan && wlan u-boot,env@ethaddr
lan 40:9b:xx:xx:xx:3c devdata@0x3f $label
wan 40:9b:xx:xx:xx:3f devdata@0x8f $label + 3
wlan2g 40:9b:xx:xx:xx:3c devdata@0x5b $label
wlan5g 40:9b:xx:xx:xx:3e devdata@0x76 $label + 2
Install via Web UI:
Apply factory image in the stock firmware's Web UI.
Install via Emergency Room Mode:
DIR-859 A1 will enter recovery mode when the system fails to boot
or press reset button for about 10 seconds.
First, set computer IP to 192.168.0.5 and Gateway to 192.168.0.1.
Then we can open http://192.168.0.1 in the web browser to upload
OpenWrt factory image or stock firmware. Some modern browsers may
need to turn on compatibility mode.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Shiji Yang [Sat, 20 May 2023 12:35:51 +0000 (20:35 +0800)]
ath79: improve support for D-Link DIR-8x9 A1 series
1. Remove unnecessary new lines in the dts.
2. Remove duplicate included file "gpio.h" in the device dts.
3. Add missing button labels "reset" and "wps".
4. Unify the format of the reg properties.
5. Add u-boot environment support.
6. Reduce spi clock frequency since the max value suggested by the
chip datasheet is only 25 MHz.
7. Add seama header fixup for DIR-859 A1. Without this header fixup,
u-boot checksum for kernel will fail after the first boot.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
INAGAKI Hiroshi [Thu, 13 Oct 2022 02:20:10 +0000 (11:20 +0900)]
ath79: enable NVMEM u-boot-env driver on generic subtarget
This patch enables NVMEM u-boot-env driver (COFNIG_NVMEM_U_BOOT_ENV) on
generic subtarget to use from devices, for MAC address and etc.
Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
Shiji Yang [Sun, 21 May 2023 14:51:16 +0000 (22:51 +0800)]
ramips: correct page read return value of the mt7621 nand driver
read_page() need to return maximum number of bitflips instead of the
accumulated number. Change takes from upstream mt7621 u-boot [1].
* @read_page: function to read a page according to the ECC generator
* requirements; returns maximum number of bitflips
* corrected in any single ECC step, -EIO hw error
[1] https://lore.kernel.org/all/cover.
1653015383.git.weijie.gao@mediatek.com/
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Christian Lamparter [Sun, 21 May 2023 17:05:03 +0000 (19:05 +0200)]
uml: exclude some /arch/x86 optimizations
The x86_64 UML target wants to include SSSE3 optimized
crypto code which lives under /arch/x86/crypto.
However, these are not built and this causes an error.
| ERROR: module '[...]/arch/x86/crypto/sha512-ssse3.ko' is missing.
| make[3]: *** [modules/crypto.mk:990: [...]/kmod-crypto-sha512_5.15.112-1_x86_64.ipk] Error 1
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Christian Lamparter [Sun, 21 May 2023 16:30:14 +0000 (18:30 +0200)]
uml: fix build error due to frame size > 1024
the UML build fails during the kernel build:
| arch/um/drivers/net_kern.c: In function 'compute_hash':
| arch/um/drivers/net_kern.c:322:1: error: the frame size of 1072 bytes is larger than 1024 bytes [-Werror=frame-larger-than=]
| 322 | }
| | ^
|cc1: all warnings being treated as errors
The compute_hash() function is added by our patch:
102-pseudo-random-mac.patch
Instead of allocating a 1024 byte buffer on the stack for the SHA1
digest input, let's allocate the data on the heap. We should be
able to do that since crypto_alloc_ahash and ahash_request_alloc
also need to allocate structures on the heap.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Doug Kerr [Thu, 8 Sep 2022 23:07:18 +0000 (19:07 -0400)]
build: drop support for python 3.6
python 3.6 EOL was Dec. 2021
buildbot is running debian 10 which ships with 3.7
meson 0.62+ requires 3.7
Signed-off-by: Doug Kerr <dek3rr@gmail.com>
Signed-off-by: Petr Štetiar <ynezz@true.cz> [rebased]
Rafał Miłecki [Wed, 17 May 2023 09:58:16 +0000 (11:58 +0200)]
mac80211: brcm: drop brcmfmac patch waiting for register_wiphy()
That was a workaround for OpenWrt generation of config files. This patch
was used to postpone returning from probe function until loading
firmware and calling register_wiphy().
All of that is not needed anymore thanks to the ieee80211 hotplug.d
script introduced in the commit
5f8f8a366136 ("base-files, mac80211,
broadcom-wl: wifi detection and configuration"). That takes care of
generating /etc/config/wireless entries even if wireless device appears
late in the booting process.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Michael Pratt [Tue, 16 May 2023 07:22:09 +0000 (03:22 -0400)]
prereq-build: remove python 2 cleanup recipe
This reverts commit
3b68fb57c938af3948ae4c2da61501183fbef649.
After refactoring build checks to update old symlinks,
and after a long time of no python 2 support,
this is no longer needed.
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Michael Pratt [Sun, 22 May 2022 10:10:56 +0000 (06:10 -0400)]
prereq-build: allow host command symlinks to update
This makes the prereq stage update the symlinks
installed into staging_dir/host/bin
by rearrainging the way they are verified.
Before, seeing or installing a symlink would result in
a successful exit code, and not installing a symlink
would result is a failed exit code. However,
that is not able to account for the difference
between existing good and bad links, or whether
the link would be the same if it was reinstalled,
because the check can match the program to a different path.
Instead, let a success exit code represent
identifying an existing symlink as exactly the same
as what would be installed if it did not exist,
and let a fail exit code represent
needing to install the symlink
or not having a match to the check criteria.
The failing exit code is caught by a new second attempt
for all of the check-* targets which will then indicate
to the user that there was an update by having a success
exit code when the check is run again and the link is the same.
When there is nothing to update, the checks will run only once.
This relies on the ls command to be POSIX-conformant with long format:
"path/to/link -> target/of/link"
Also, make sure the symlink is executable, not just a file,
and the directory only needs to be created once.
Fixes: #12610
Signed-off-by: Michael Pratt <mcpratt@pm.me>
Sebastian Kemper [Wed, 17 Aug 2022 20:13:56 +0000 (22:13 +0200)]
build: revert
54070a1 (all kernels are >= 5.10)
Commit
54070a1 was added to allow building proper SDKs with kernels <
5.10. Now that all targets use at least kernel 5.10 it can be reverted.
Signed-off-by: Sebastian Kemper <sebastian_ml@gmx.net>
Christian Lamparter [Sun, 21 May 2023 11:11:14 +0000 (13:11 +0200)]
firmware: intel-microcode: update to
20230512
Debian changelog:
intel-microcode (3.
20230512.1) unstable; urgency=medium
* New upstream microcode datafile
20230512 (closes: #
1036013)
* Includes fixes or mitigations for an undisclosed security issue
* New microcodes:
sig 0x000906a4, pf_mask 0x40, 2022-10-12, rev 0x0004, size 115712
sig 0x000b06e0, pf_mask 0x01, 2022-12-19, rev 0x0010, size 134144
* Updated microcodes:
sig 0x00050653, pf_mask 0x97, 2022-12-21, rev 0x1000171, size 36864
sig 0x00050654, pf_mask 0xb7, 2022-12-21, rev 0x2006f05, size 44032
sig 0x00050656, pf_mask 0xbf, 2022-12-21, rev 0x4003501, size 37888
sig 0x00050657, pf_mask 0xbf, 2022-12-21, rev 0x5003501, size 37888
sig 0x0005065b, pf_mask 0xbf, 2022-12-21, rev 0x7002601, size 29696
sig 0x000606a6, pf_mask 0x87, 2022-12-28, rev 0xd000390, size 296960
sig 0x000706e5, pf_mask 0x80, 2022-12-25, rev 0x00ba, size 113664
sig 0x000806a1, pf_mask 0x10, 2023-01-13, rev 0x0033, size 34816
sig 0x000806c1, pf_mask 0x80, 2022-12-28, rev 0x00aa, size 110592
sig 0x000806c2, pf_mask 0xc2, 2022-12-28, rev 0x002a, size 97280
sig 0x000806d1, pf_mask 0xc2, 2022-12-28, rev 0x0044, size 102400
sig 0x000806e9, pf_mask 0xc0, 2022-12-26, rev 0x00f2, size 105472
sig 0x000806e9, pf_mask 0x10, 2023-01-02, rev 0x00f2, size 105472
sig 0x000806ea, pf_mask 0xc0, 2022-12-26, rev 0x00f2, size 105472
sig 0x000806eb, pf_mask 0xd0, 2022-12-26, rev 0x00f2, size 105472
sig 0x000806ec, pf_mask 0x94, 2022-12-26, rev 0x00f6, size 105472
sig 0x000806f8, pf_mask 0x87, 2023-03-13, rev 0x2b000461, size 564224
sig 0x000806f7, pf_mask 0x87, 2023-03-13, rev 0x2b000461
sig 0x000806f6, pf_mask 0x87, 2023-03-13, rev 0x2b000461
sig 0x000806f5, pf_mask 0x87, 2023-03-13, rev 0x2b000461
sig 0x000806f4, pf_mask 0x87, 2023-03-13, rev 0x2b000461
sig 0x000806f8, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1, size 595968
sig 0x000806f6, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1
sig 0x000806f5, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1
sig 0x000806f4, pf_mask 0x10, 2023-02-14, rev 0x2c0001d1
sig 0x000906a3, pf_mask 0x80, 2023-02-14, rev 0x042a, size 218112
sig 0x000906a4, pf_mask 0x80, 2023-02-14, rev 0x042a
sig 0x000906e9, pf_mask 0x2a, 2022-12-26, rev 0x00f2, size 108544
sig 0x000906ea, pf_mask 0x22, 2023-01-12, rev 0x00f2, size 104448
sig 0x000906eb, pf_mask 0x02, 2022-12-26, rev 0x00f2, size 105472
sig 0x000906ec, pf_mask 0x22, 2023-01-12, rev 0x00f2, size 104448
sig 0x000906ed, pf_mask 0x22, 2023-02-05, rev 0x00f8, size 104448
sig 0x000a0652, pf_mask 0x20, 2022-12-27, rev 0x00f6, size 96256
sig 0x000a0653, pf_mask 0x22, 2023-01-01, rev 0x00f6, size 97280
sig 0x000a0655, pf_mask 0x22, 2022-12-26, rev 0x00f6, size 96256
sig 0x000a0660, pf_mask 0x80, 2022-12-26, rev 0x00f6, size 97280
sig 0x000a0661, pf_mask 0x80, 2022-12-26, rev 0x00f6, size 96256
sig 0x000a0671, pf_mask 0x02, 2022-12-25, rev 0x0058, size 103424
sig 0x000b0671, pf_mask 0x32, 2023-02-06, rev 0x0113, size 207872
sig 0x000b06a2, pf_mask 0xc0, 2023-02-22, rev 0x4112, size 212992
sig 0x000b06a3, pf_mask 0xc0, 2023-02-22, rev 0x4112
* source: update symlinks to reflect id of the latest release,
20230512
-- Henrique de Moraes Holschuh <hmh@debian.org> Tue, 16 May 2023 00:13:02 -0300
intel-microcode (3.
20230214.1) unstable; urgency=medium
* Non-maintainer upload.
* New upstream microcode datafile
20230214
- Includes Fixes for: (Closes: #
1031334)
- INTEL-SA-00700: CVE-2022-21216
- INTEL-SA-00730: CVE-2022-33972
- INTEL-SA-00738: CVE-2022-33196
- INTEL-SA-00767: CVE-2022-38090
* New Microcodes:
sig 0x000806f4, pf_mask 0x10, 2022-12-19, rev 0x2c000170
sig 0x000806f4, pf_mask 0x87, 2022-12-27, rev 0x2b000181
sig 0x000806f5, pf_mask 0x10, 2022-12-19, rev 0x2c000170
sig 0x000806f5, pf_mask 0x87, 2022-12-27, rev 0x2b000181
sig 0x000806f6, pf_mask 0x10, 2022-12-19, rev 0x2c000170
sig 0x000806f6, pf_mask 0x87, 2022-12-27, rev 0x2b000181
sig 0x000806f7, pf_mask 0x87, 2022-12-27, rev 0x2b000181
sig 0x000806f8, pf_mask 0x10, 2022-12-19, rev 0x2c000170
sig 0x000806f8, pf_mask 0x10, 2022-12-19, rev 0x2c000170, size 600064
sig 0x000806f8, pf_mask 0x87, 2022-12-27, rev 0x2b000181
sig 0x000806f8, pf_mask 0x87, 2022-12-27, rev 0x2b000181, size 561152
sig 0x000b06a2, pf_mask 0xc0, 2022-12-08, rev 0x410e
sig 0x000b06a2, pf_mask 0xc0, 2022-12-08, rev 0x410e, size 212992
sig 0x000b06a3, pf_mask 0xc0, 2022-12-08, rev 0x410e
* Updated Microcodes:
sig 0x00050653, pf_mask 0x97, 2022-08-30, rev 0x1000161, size 36864
sig 0x00050656, pf_mask 0xbf, 2022-08-26, rev 0x4003303, size 37888
sig 0x00050657, pf_mask 0xbf, 2022-08-26, rev 0x5003303, size 37888
sig 0x0005065b, pf_mask 0xbf, 2022-08-26, rev 0x7002503, size 29696
sig 0x000606a6, pf_mask 0x87, 2022-10-09, rev 0xd000389, size 296960
sig 0x000606c1, pf_mask 0x10, 2022-09-23, rev 0x1000211, size 289792
sig 0x000706a1, pf_mask 0x01, 2022-09-16, rev 0x003e, size 75776
sig 0x000706a8, pf_mask 0x01, 2022-09-20, rev 0x0022, size 76800
sig 0x000706e5, pf_mask 0x80, 2022-08-31, rev 0x00b8, size 113664
sig 0x000806a1, pf_mask 0x10, 2022-09-07, rev 0x0032, size 34816
sig 0x00090672, pf_mask 0x07, 2023-01-04, rev 0x002c
sig 0x00090672, pf_mask 0x07, 2023-01-04, rev 0x002c, size 219136
sig 0x00090675, pf_mask 0x07, 2023-01-04, rev 0x002c
sig 0x000906a3, pf_mask 0x80, 2023-01-11, rev 0x0429
sig 0x000906a3, pf_mask 0x80, 2023-01-11, rev 0x0429, size 218112
sig 0x000906a4, pf_mask 0x80, 2023-01-11, rev 0x0429
sig 0x000906c0, pf_mask 0x01, 2022-09-02, rev 0x24000024, size 20480
sig 0x000a0671, pf_mask 0x02, 2022-08-31, rev 0x0057, size 103424
sig 0x000b0671, pf_mask 0x32, 2022-12-19, rev 0x0112, size 207872
sig 0x000b06f2, pf_mask 0x07, 2023-01-04, rev 0x002c
sig 0x000b06f5, pf_mask 0x07, 2023-01-04, rev 0x002c
-- Tobias Frost <tobi@debian.org> Sun, 12 Mar 2023 18:16:50 +0100
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Philip Prindeville [Wed, 17 May 2023 15:38:48 +0000 (09:38 -0600)]
kernel: disable IGD (video DRM) support
IGD is only useful when accelerating a VM guest that wants to direct
render to memory in the host's framebuffer, but since OpenWrt
typically runs on headless hardware, this serves no purpose.
Also build vfio with VFIO_NOIOMMU undefined (to get all of the code
enabled), but allow it to be enabled via boot-time modparams
settings (or at run-time via sysfs writes to
"/sys/module/vfio/parameters/enable_unsafe_noiommu_mode".
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Felix Baumann [Sat, 20 May 2023 07:07:44 +0000 (09:07 +0200)]
treewide: Disable building 8M RAM devices
Following deprecation notice[1] in 21.02, disable target with 8M of RAM
[1] https://openwrt.org/supported_devices/864_warning
Signed-off-by: Felix Baumann <felix.bau@gmx.de>
Felix Baumann [Sat, 20 May 2023 06:37:45 +0000 (08:37 +0200)]
treewide: Disable building 32M RAM devices
Following deprecation notice[1] in 21.02, disable targets with 32M of RAM
[1] https://openwrt.org/supported_devices/864_warning
Signed-off-by: Felix Baumann <felix.bau@gmx.de>
Felix Baumann [Fri, 19 May 2023 16:06:15 +0000 (18:06 +0200)]
treewide: Disable building 16M RAM devices
Following deprecation notice[1] in 21.02, disable targets with 16M of RAM
[1] https://openwrt.org/supported_devices/864_warning
Signed-off-by: Felix Baumann <felix.bau@gmx.de>
DENG Qingfang [Thu, 13 Apr 2023 03:21:01 +0000 (11:21 +0800)]
ramips: mt7621: fix Xiaomi Router 3G/Pro LEDs
The PHY name has been changed to "mt7530-0" since IRQ support
was added to MT7530 driver.
Fixes: f9cfe7af1f1f ("kernel: backport MT7530 IRQ support")
Signed-off-by: DENG Qingfang <dqfext@gmail.com>
(node names, added color, function+function-enumerator properties)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Nozomi Miyamori [Wed, 29 Mar 2023 12:15:13 +0000 (21:15 +0900)]
dropbear: add ForceCommand uci option
adds ForceCommand option. If the command is specified,
it forces users to execute the command when they log in.
Signed-off-by: Nozomi Miyamori <inspc43313@yahoo.co.jp>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Stan Grishin [Mon, 27 Feb 2023 00:04:33 +0000 (00:04 +0000)]
x86: base-files add support for Sophos 135r3/135r3w
The Sophos SG/XG-135 revision 3 has odd numbering of eth ports
where the WAN port (as marked on the case) is:
`eth6` and `eth0`, `eth1`, `eth2`, `eth3`, `eth5`, `eth7`, `eth8` are LAN ports.
Port `eth4` seems to be the SFP port.
Also add the missing LED definition for supported Sophos devices.
Original discussion at:
https://forum.openwrt.org/t/openwrt-on-revision-3-of-sophos-desktop-appliances/152912
Signed-off-by: Stan Grishin <stangri@melmac.ca>
Christian Lamparter [Sat, 20 May 2023 19:43:39 +0000 (21:43 +0200)]
tfa-layerscape: fix fiptool's build
A missing '\' caused the remaining parameters not to be passed to make.
This fixes the following error:
| gcc -c [...] fiptool.c -o fiptool.o
| In file included from fiptool.h:16,
| from fiptool.c:19:
|fiptool_platform.h:19:11: fatal error: openssl/sha.h: No such file or directory
| 19 | # include <openssl/sha.h>
| | ^~~~~~~~~~~~~~~
|compilation terminated.
|make[3]: *** [Makefile:58: fiptool.o] Error 1
as the HOST_CFLAGS are no longer passed.
then, HOST_CFLAGS is specified as a command argument, this
is a specific problem of our built since appending these
needs the override directive.
Fixes: df28bfe03247 ("tfa-layerscape: Change to github and use the latest tag")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Linhui Liu [Sat, 20 May 2023 05:45:19 +0000 (13:45 +0800)]
tools/ccache: update to 4.8.1
Release Notes:
https://ccache.dev/releasenotes.html#_ccache_4_8_1
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
David Yang [Wed, 8 Feb 2023 01:59:27 +0000 (09:59 +0800)]
build: Allow specifying uImage time
Some U-Boot checks for a specified uImage time and refuses to boot if
mismatched. This patch fixes it by recognizing UIMAGE_TIME parameter.
Signed-off-by: David Yang <mmyangfl@gmail.com>
Nick Hainke [Thu, 18 May 2023 12:49:51 +0000 (14:49 +0200)]
nettle: update to 3.9
Changelog:
https://git.lysator.liu.se/nettle/nettle/-/blob/
26cd0222fd09b8f5dc0edba30d6908722c7e9b09/NEWS
Refresh patch:
- 100-portability.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Sander van Deijck [Thu, 18 May 2023 22:59:25 +0000 (00:59 +0200)]
kirkwood: add support for Iomega Storcenter ix4-200d
Iomega Storcenter ix4-200d is a four-bay SATA NAS powered by a Marvell
Kirkwood SoC clocked at 1.2GHz. It has 512MB of RAM and 32MB of
flash memory, 3x USB 2.0 and 2x 1Gbit/s NIC
Specification:
- SoC: Marvell Kirkwood
88F6281
- CPU/Speed: 1200Mhz
- Flash size: 32 MiB
- RAM: 512MB
- LAN: 2x 1Gbit/s
- 3x USB 2.0
Notes:
- The blue drive LED is triggered by HDD activity, it can not be controlled
via GPIO.
- The LCD screen requires proprietary code and does not function at this time.
- Due to a kernel-related issue with the Marvell 88SE6121 SATA controller,
currently only trays numbered #3 and #4 work, #1 and #2 do not. [1]
Serial pinout:
CN4
--------------
| 10 8 6 4 2 |
| 9 7 5 3 1 |
-------------- PIN 1 Mark (fat line)
1 = RXD
4 = TXD
6 = GND
9 = 3.3V (not necessary to connect)
Installation instructions:
1. download initramfs-uImage and copy into tftp server
2. connect the tftp server to network port #1
3. access uboot environment with serial cable and run
setenv mainlineLinux yes
setenv arcNumber 1682
setenv console 'console=ttyS0,115200n8'
setenv mtdparts 'mtdparts=orion_nand:0x100000@0x000000(u-boot)ro,0x20000@0xA0000(u-boot environment)ro,0x300000@0x100000(kernel),0x1C00000@0x400000(ubi)'
setenv bootargs_root 'root='
setenv bootcmd 'setenv bootargs ${console} ${mtdparts} ${bootargs_root}; nand read.e 0x800000 0x100000 0x300000; bootm 0x00800000'
saveenv
setenv serverip 192.168.1.1
setenv ipaddr 192.168.1.2
tftpboot 0x00800000 [initramfs-uImage filename]
bootm 0x00800000
4. connect to LAN on network port #2, log into openwrt and sysupgrade to install into flash
[1] https://bugzilla.kernel.org/show_bug.cgi?id=216094
Signed-off-by: Sander van Deijck <sander@vandeijck.com>
(aligned FROM from signed-off. LED+key rename, whitespace removal)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Aleksander Jan Bajkowski [Sun, 14 May 2023 09:43:57 +0000 (11:43 +0200)]
kernel: remove obsolete kernel version switches
This removes unneeded kernel version switches from the targets after
kernel 5.10 has been dropped.
Signed-off-by: Aleksander Jan Bajkowski <olek2@wp.pl>
Wojciech Dubowik [Wed, 19 Apr 2023 06:41:18 +0000 (08:41 +0200)]
tfa-layerscape: Change to github and use the latest tag
The default location of tfa-layerscape has been changed from
codeuaurora to github. Also use the latest tag for Layerscape
Linux Development POC from NXP.
v2:
* restored ls1021a-afrdm board
* added platform defines to fiptool so ls-ddr-phy can be built
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Wojciech Dubowik [Wed, 12 Apr 2023 09:33:37 +0000 (11:33 +0200)]
ppfe-firmware: Bump to lf-6.1.1-1.0.0 and switch to github
The default location of ppfe-firmware has been changed
from codeuaurora to github. Also use the latest tag for
Layerscape Linux Development POC from NXP.
Tested on:
* NXP FRWY-LS1012A
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Wojciech Dubowik [Wed, 12 Apr 2023 09:22:05 +0000 (11:22 +0200)]
fman-ucode: Bump to lf-6.1.1-1.0.0 and switch to github
The default location of fman-ucode has been changed from
codeuaurora to github. Also use the latest tag for Layerscape
Linux Development POC from NXP.
Tested on:
* NXP LS1046A-RDB
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Wojciech Dubowik [Wed, 12 Apr 2023 09:20:37 +0000 (11:20 +0200)]
uboot-layerscape: Bump to lf-6.1.1-1.0.0 and switch to github
The default location of uboot-layerscape has been changed
from codeuaurora to github. Also use the latest tag for
Layerscape Linux Development POC from NXP.
Tested on:
* NXP FRWY-LS1012A
* NXP LS1028A-RDB
* NXP LS1046A-RDB
V2: Remove ls1028ardb specifix fixups not needed with new uboot
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Wojciech Dubowik [Wed, 12 Apr 2023 09:17:01 +0000 (11:17 +0200)]
ls-rcw: Bump to lf-6.1.1-1.0.0 and switch to github
The default location of ls-rcw has been changed from codeuaurora
to github. The reason is that the old codeaurora source no longer
resolves. Also use the latest tag for Layerscape Linux Development
POC from NXP.
Tested on:
* NXP FRWY-LS1012A
* NXP LS1046A-RDB
Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
(reset PKG_RELEASE, Mention that previous codeaurora source is
no longer available)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Tiago Gaspar [Wed, 12 Apr 2023 12:53:33 +0000 (13:53 +0100)]
kernel: net: add support for kernel tls
Add ktls (Kernel TLS) kmods to enable TLS support
in kernel (allowing TLS offload when the network
card supports it)
Signed-off-by: Tiago Gaspar <tiagogaspar8@gmail.com>
(added disabled symbols)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Sven Roederer [Thu, 11 May 2023 10:42:12 +0000 (12:42 +0200)]
build: escape whitespaces in VERSION_DIST for Netgear images
Prevents subshell commands from failing to parse options
when having defined a whitespace in the VERSION_DIST.
As the called resulting images unlikely will handle
whitespace correctly, we replace them by "-".
Signed-off-by: Sven Roederer <S.Roederer@colvistec.de>
Christian Lamparter [Thu, 18 May 2023 20:51:08 +0000 (22:51 +0200)]
ipq40xx: convert EZVIZ CS-W3-WD1200G-EUP to DSA
Convert the repeater to DSA.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Lech Perczak [Tue, 13 Sep 2022 21:40:06 +0000 (23:40 +0200)]
ath79: fix 5GHz on QCA9886 variant of ZTE MF286
Recently, a strange variant of ZTE MF286 was discovered, having QCA9886
radio instead of QCA9882 - like MF286A, but having MF286 flash layout
and rest of hardware.
To support both variants in one image, bind calibration data at offset
0x5000 both as "calibration" and "pre-calibration" nvmem-cells, so
ath10k can load caldata for both at runtime.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Jan Forman [Fri, 28 May 2021 07:45:52 +0000 (09:45 +0200)]
ath79: Add support for D-Link DIR-869-A1
Specifications
The D-Link EXO AC1750 (DIR-869) router released in 2016.
It is powered by Qualcomm Atheros QCA9563 @ 750 MHz chipset, 64 MB RAM and 16 MB flash.
10/100/1000 Gigabit Ethernet WAN port
Four 10/100/1000 Gigabit Ethernet LAN ports
Power Button, Reset Button, WPS Button, Mode Switch
Flashing
1. Upload factory.bin via D-link web interface (Management/Upgrade).
Revert to stock
Upload original firmware via OpenWrt sysupgrade interface.
Debricking
D-Link Recovery GUI (192.168.0.1)
Signed-off-by: Jan Forman <forman.jan96@gmail.com>
Jan Forman [Mon, 31 Oct 2022 21:15:56 +0000 (22:15 +0100)]
ath79: Convert calibration data to nvmem
For D-link DIR-859 and DIR-869
Replace the mtd-cal-data by an nvmem-cell.
Add the PCIe node for the ath10k radio to the devicetree.
Thanks to DragonBlue for this patch
Signed-off-by: Jan Forman <jforman@tuta.io>
Jan Forman [Sat, 15 May 2021 18:51:14 +0000 (20:51 +0200)]
ath79: Create shared dtsi for DIR-859
Create a shared dtsi for the dir-859 and similarly device, it similarly as it done for the dir-842.
Signed-off-by: Jan Forman <jforman@tuta.io>
Jan Forman [Sat, 15 May 2021 18:48:12 +0000 (20:48 +0200)]
ath79: Replace reset-button for DIR-859
gpio-export for the switch reset pin replaced with a reset pin definition for the driver, within the phy node.
Signed-off-by: Jan Forman <forman.jan96@gmail.com>
Tested-By: Sebastian Schaper <openwrt@sebastianschaper.net>
Linhui Liu [Fri, 19 May 2023 15:06:08 +0000 (23:06 +0800)]
pcre2: switch to Github Releases and bump to 10.42
The mirror at SourceForge is an unofficial mirror and no longer maintained.
ChangeLogs:
https://github.com/PCRE2Project/pcre2/blob/pcre2-10.42/ChangeLog
Signed-off-by: Linhui Liu <liulinhui36@gmail.com>
Shiji Yang [Fri, 19 May 2023 06:05:01 +0000 (14:05 +0800)]
ramips: fix build error on Airlink AR670W
The 'KERNEL' is not referenced by other objects, so double '$$' will
cause shell unable to parse the variable 'BLOCKSIZE':
dd ... bs=$(BLOCKSIZE) conv=sync
bash: line 1: BLOCKSIZE: command not found
Fixes: 09a0efbe83(ramips: set default BLOCKSIZE to 64k for nor flash devices)
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Hauke Mehrtens [Thu, 18 May 2023 15:12:36 +0000 (17:12 +0200)]
util-linux: Use SYS_getrandom in randutils.c
The getrandom syscall is not hanging at bootup any more if there is
not enough entropy. This was fixed upstream in 2018 in commit:
https://github.com/util-linux/util-linux/commit/
a9cf659e0508c1f56813a7d74c64f67bbc962538
This OpenWrt patch is not needed any more.
This reverts commit
e64463ebde55 ("util-linux: avoid using the getrandom syscall")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Thu, 18 May 2023 18:07:24 +0000 (20:07 +0200)]
util-linux: Fix taskset conflict with busybox
This fixes the following error:
* check_data_file_clashes: Package taskset wants to install file build_dir/target-powerpc_8548_musl/root-mpc85xx/usr/bin/taskset
But that file is already provided by package * busybox
* opkg_install_cmd: Cannot install package taskset.
Fixes: 3c3d797c4dad ("busybox: enable taskset by default")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Nick Hainke [Fri, 19 May 2023 09:01:05 +0000 (11:01 +0200)]
tools/cmake: update to 3.26.4
Changelog:
https://www.kitware.com/cmake-3-26-4-available-for-download/
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Thu, 18 May 2023 11:07:23 +0000 (13:07 +0200)]
libjson-c: import patch to fix compilation on macos
Fixes errors in the form of:
/Users/user/src/openwrt/openwrt/build_dir/hostpkg/json-c-0.16/json_util.c:63:35: error: a function declaration without a prototype is deprecated in all versions of C [-Werror,-Wstrict-prototypes]
const char *json_util_get_last_err()
^
void
1 error generated.
ninja: build stopped: subcommand failed.
Reported-by: Paul Spooren <mail@aparcar.org>
Suggested-by: Paul Spooren <mail@aparcar.org>
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sun, 7 May 2023 15:58:26 +0000 (17:58 +0200)]
f2fs-tools: update to 1.16.0
Remove upstramed patches:
- 100-configure.ac-fix-AC_ARG_WITH.patch
- 101-configure.ac-fix-cross-compilation.patch
Remove deprecated f2fstat tool:
https://git.kernel.org/pub/scm/linux/kernel/git/jaegeuk/f2fs-tools.git/commit/?id=
77bf7ed29f1dd1341079913f3b36fc62f812c4f5
Changelog:
06c027a f2fs-tools: upgrade version 1.16.0
542cc57 fsck.f2fs: fix sanity check logic for cp_payload
a7df89e mkfs.f2fs: remove indentation
c82985a fsck.f2fs: don't call report_zone on normal partition
0ac168e f2fs-tools: relax zone size of power of 2
641be32 mkfs.f2fs: trim all the devices except the first one
3835fef f2fs-tools: fix # of total segments
5b08ca9 f2fs_io: support AES_256_HCTR2
ae3301c f2fs_io: Fix out of tree builds
ddbde27 fsck.f2fs: relocate chksum verification step during f2fs_do_mount()
77bf7ed f2fs-tools: Remove deprecated f2fstat
fb6575e Remove sg_write_buffer
1bb669e fsck.f2fs: avoid uncessary recalculation
ccd2361 fsck.f2fs: fix potential overflow of copying i_name
cd6b133 fsck.f2fs: add parentheses for SB_MASK
399600a dump.f2fs: remove unavailable option -g
3e6e178 f2fs-tools: define HAVE_CLOCK_GETTIME properly
907b972 f2fs-tools: support F2FS_IOC_START_ATOMIC_REPLACE
9ff70fb f2fs-tools: give less overprovisioning space
844f821 f2fs-tools: set host-aware zoned device similar to host-managed one
88ac76d fsck.f2fs: fix missing to assign c.zoned_model
8cbe34e fsck.f2fs: trigger repairing if filesystem has inconsistent errors
2f1dde2 fsck.f2fs: trigger repairing if filesystem was forced to stop
465159f fsck.f2fs: export valid image size
3486b62 mkfs.f2fs: update allocation policy for ro feature
bdd51e5 fsck.f2fs: fix __end_block_addr()
5a5e419 Always use sparse/sparse.h when building for Android
19f77c6 f2fs-tools: fix build error on lz4-1.9.4
986c1f1 Fix format strings in log messages
0d6acbe fsck.f2fs: use elapsed_time in checkpoint for period check
9b7a4c5 mkfs.f2fs: catch total_zones=0 instead of crashing
6148db3 f2fs-tools: use F2FS_BLKSIZE instead of PAGE_*_SIZE
f09c2b7 f2fs_io: support triggering filesystem GC via ioctl
32e7d27 configure.ac: fix cross compilation
65fe94e configure.ac: fix AC_ARG_WITH
6325cf7 Use F2FS_BLKSIZE as the size of struct f2fs_summary_block
c89be7a Use F2FS_BLKSIZE for dev_read_block() buffers
5317d18 Improve compile-time type checking for f2fs_report_zone()
92e2e52 Fix f2fs_report_zone()
648a491 Fix the struct f2fs_dentry_block definition
c964547 resize.f2fs: add option to manually specify new overprovision
a741438 fsck.f2fs: drop compression bit if inline_data is set
406b1c9 f2fs-tools: fix cannot get bdev information
9d0cb9e f2fs_io: add dsync option for write
a7b8b46 tools: fix file too large causing overflow
bddca6f dump.f2fs: add -I nid to dump inode by scan full disk
ebc3879 android_config: add time headers
c1144bf Check fallthrough in mount.h for Mac
bcb9929 avoid unnecessary function
7d902f4 Fix dependencies on linux/blkzoned.h when using Bionic.
274abbb Remove unnecessary config.h
8c97ab3 libzone: remove duplicate header
adcec10 Support zoned device if libc exists
efc2bc7 mkfs.f2fs: fix typo
3034a41 mkfs.f2fs: split unused parameter
dd8d8e5 f2fs-tools: do not use SG_IO in Android
4f216e6 f2fs-tools: move android_config before defining them
48c5dbb f2fscrypt: adjust config file first
4b55459 android_config: add missing uuid library
Signed-off-by: Nick Hainke <vincent@systemli.org>
Hauke Mehrtens [Thu, 18 May 2023 14:19:47 +0000 (16:19 +0200)]
ath25: Replace fall through comment with fallthrough;
Replace the fall through comment with fallthrough; in the ar2315 flash
driver.
This fixes a compile warning.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Thu, 18 May 2023 14:17:58 +0000 (16:17 +0200)]
ath25: Remove virt_to_phys() from Ethernet driver
Instead of defining an own virt_to_phys() use the version from the
generic MIPS arch code which does the same.
This fixes a compile warning.
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Thu, 18 May 2023 17:29:18 +0000 (19:29 +0200)]
util-linux: Fix build on powerpc and arc
This fixes the build of util-linux on powerpc and arc. Both CPU
architectures were not supported here in addition to the missing MIPS
support.
Fixes: 628a410ed149 ("util-linux: update to 2.39")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Daniel Golle [Fri, 19 May 2023 08:31:36 +0000 (09:31 +0100)]
mediatek: fix append-gl-metadata when running in buildbot
Use same logic as in append-metadata so build doesn't fail in case of
missing build-key (it was previously failing on the buildbot runners).
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Robert Marko [Thu, 18 May 2023 10:20:15 +0000 (12:20 +0200)]
ipq40xx: fix rebooting after 5.15.111
Kernel 5.15.111 includes backport of commit
("firmware: qcom_scm: Clear download bit during reboot") which is causing
reboot on ipq40xx to stop working, more precisely the board will hang after
reboot is called with:
root@OpenWrt:/# reboot
root@OpenWrt:/# [ 76.473541] device lan1 left promiscuous mode
[ 76.474204] br-lan: port 1(lan1) entered disabled state
[ 76.527975] device lan2 left promiscuous mode
[ 76.530301] br-lan: port 2(lan2) entered disabled state
[ 76.579376] device lan3 left promiscuous mode
[ 76.581698] br-lan: port 3(lan3) entered disabled state
[ 76.638434] device lan4 left promiscuous mode
[ 76.638777] br-lan: port 4(lan4) entered disabled state
[ 76.978489] qca8k-ipq4019
c000000.switch wan: Link is Down
[ 76.978883] device eth0 left promiscuous mode
[ 76.987077] ipqess-edma
c080000.ethernet eth0: Link is Down
[
Format: Log Type - Time(microsec) - Message - Optional Info
Log Type: B - Since Boot(Power On Reset), D - Delta, S - Statistic
S - QC_IMAGE_VERSION_STRING=BOOT.BF.3.1.1-00123
S - IMAGE_VARIANT_STRING=DAABANAZA
S - OEM_IMAGE_VERSION_STRING=CRM
S - Boot Config, 0x00000021
S - Reset status Config, 0x00000010
S - Core 0 Frequency, 0 MHz
B - 261 - PBL, Start
B - 1339 - bootable_media_detect_entry, Start
B - 1679 - bootable_media_detect_success, Start
B - 1693 - elf_loader_entry, Start
B - 5076 - auth_hash_seg_entry, Start
B - 7223 - auth_hash_seg_exit, Start
B - 578349 - elf_segs_hash_verify_entry, Start
B - 696356 - PBL, End
B - 696380 - SBL1, Start
B - 787236 - pm_device_init, Start
D - 7 - pm_device_init, Delta
B - 788701 - boot_flash_init, Start
D - 52782 - boot_flash_init, Delta
B - 845625 - boot_config_data_table_init, Start
D - 3836 - boot_config_data_table_init, Delta - (419 Bytes)
B - 852841 - clock_init, Start
D - 7566 - clock_init, Delta
B - 864883 - CDT version:2,Platform ID:9,Major ID:0,Minor ID:0,Subtype:64
B - 868413 - sbl1_ddr_set_params, Start
B - 873402 - cpr_init, Start
D - 2 - cpr_init, Delta
B - 877842 - Pre_DDR_clock_init, Start
D - 4 - Pre_DDR_clock_init, Delta
D - 13234 - sbl1_ddr_set_params, Delta
B - 891155 - pm_driver_init, Start
D - 2 - pm_driver_init, Delta
B - 909105 - Image Load, Start
B -
1030210 - Boot error ocuured!. Error code: 303d
So, until a proper fix is found, lets revert the culprit patch to have
reboot working again.
Fixes: 228e0e10398b ("kernel: bump 5.15 to 5.15.111")
Signed-off-by: Robert Marko <robimarko@gmail.com>
Hauke Mehrtens [Wed, 17 May 2023 22:31:21 +0000 (00:31 +0200)]
toolchain: glibc: Fix build with autoconf 2.71
The glibc build was failing with this error message:
aclocal.m4:6: error: Exactly version 2.69 of Autoconf is required but you have 2.71
aclocal.m4:6: the top level
The autoconf run on glibc is not needed, just remove it.
Fixes: #12631
Fixes: 030447b8f4c7 ("tools/autoconf: bump to 2.71")
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Hauke Mehrtens [Wed, 17 May 2023 22:27:22 +0000 (00:27 +0200)]
toolchain: glibc: Update glibc 2.37 to recent HEAD
This adds the following changes:
790e504a17 stdlib: Undo post review change to
16adc58e73f3 [BZ #27749]
590d0e089b elf: Restore ldconfig libc6 implicit soname logic [BZ #30125]
1d63573f81 stdio-common: tests: don't double-define _FORTIFY_SOURCE
97ad4c64b9 gshadow: Matching sgetsgent, sgetsgent_r ERANGE handling (bug 30151)
9cc2f41e52 x86_64: Fix asm constraints in feraiseexcept (bug 30305)
78ab913eab posix: Fix system blocks SIGCHLD erroneously [BZ #30163]
5d750495db gmon: Fix allocated buffer overflow (bug 29444)
d230623264 gmon: improve mcount overflow handling [BZ# 27576]
ff3a71ec1f gmon: fix memory corruption issues [BZ# 30101]
a908c18d47 gmon: Revert addition of tunables to preserve GLIBC_PRIVATE ABI
7c32cb7dd8 gmon: Revert addition of tunables to the manual
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
John Audia [Thu, 18 May 2023 10:18:23 +0000 (06:18 -0400)]
kernel: bump 5.15 to 5.15.112
Manually adjusted before running quilt due to new location in tree:
backport-5.15/780-v5.16-bus-mhi-pci_generic-Introduce-Sierra-EM919X-support.patch
backport-5.15/781-v6.1-bus-mhi-host-always-print-detected-modem-name.patch
pending-5.15/790-bus-mhi-core-add-SBL-state-callback.patch
All other patches automatically rebased.
Build system: x86_64
Build-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: bcm2711/RPi4B, ramips/tplink_archer-a6-v3, filogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Thu, 18 May 2023 10:16:11 +0000 (06:16 -0400)]
kernel: other: adjust paths for new location
This upstream commit[1] moves drivers/bus/mhi/core/ to
drivers/bus/mhi/host/ so we need to correct for that here.
https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.112&id=
9fbf10148f31a63b6d8c2b0e56cb97eb173d600b
Signed-off-by: John Audia <therealgraysky@proton.me>
Mark Baker [Thu, 11 May 2023 19:15:57 +0000 (15:15 -0400)]
umdns: Update to umdns HEAD
Update to umdns HEAD to include latest enhancements for browse method
filtering, return of TXT records as an array, dumping IPv4/6 as an
array, and including the interface name in a browse reply.
Signed-off-by: Mark Baker <mark@vpost.net>
Tested-by: Stefan Lippers-Hollmann <s.l-h@gmx.de> #ipq807x, mt7621, x86_64
Tianling Shen [Sat, 13 May 2023 05:54:38 +0000 (13:54 +0800)]
rockchip: add NanoPi R2C support
The NanoPi R2C is a minor variant of NanoPi R2S with the on-board NIC
chip changed from rtl8211e to yt8521s, and otherwise identical to R2S.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sat, 13 May 2023 05:54:38 +0000 (13:54 +0800)]
uboot-rockchip: add NanoPi R2C support
Add support for the FriendlyARM NanoPi R2C.
Manually generated of-platdata files to avoid swig dependency.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sat, 13 May 2023 05:54:38 +0000 (13:54 +0800)]
kernel: backport Motorcomm YT8521/YT8531 support
It will be used on NanoPi R2C and OrangePi R1 Plus LTS board.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sat, 13 May 2023 04:34:45 +0000 (12:34 +0800)]
rockchip: move UBOOT_DEVICE_NAME to default
Simplify variable usage.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sat, 13 May 2023 04:19:52 +0000 (12:19 +0800)]
rockchip: merge bootscript
The bootscript for nanopi r2s/r4s only changes the serial address, so
make it auto detected in mmc bootscript rather than creating more
(redudant) files.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sat, 13 May 2023 04:16:21 +0000 (12:16 +0800)]
uboot-rockchip: cleanup redudant variables
Instead of adding these common variables again and again simply create a
shared set for each SoC.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tim Harvey [Tue, 28 Feb 2023 00:56:25 +0000 (16:56 -0800)]
gpio-button-hotplug: do not error on interrupt attached keys
The Linux gpio-keys driver bindings allow for GPIO attached or interrupt
attached keys. Currently if an interrupt attached key is encountered
gpio_keys_button_probe() will fail due to not being able to get a gpio
descriptor:
gpio-keys: probe of gpio-keys failed with error -2
Skip the failure in the case of interrupt attached keys to resolve this.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Christian Lamparter [Thu, 18 May 2023 15:08:54 +0000 (17:08 +0200)]
ipq806x: remove dangling ipq-wifi-edgecore_ecw5410
should have been part of the ipq-wifi update.
Fixes: 8217f02a1c5e ("ipq-wifi: drop upstreamed board-2.bin")
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Tim Harvey [Fri, 17 Feb 2023 22:03:46 +0000 (14:03 -0800)]
imx: image: ventana: add blkdev compressed disk image
Add a ventana-img.gz compressed disk image to support
squashfs+ext4 on a block storage device such as USB/MMC/SATA.
The Ventana bootloader expects the bootscript to be
boot/6x_bootscript-ventana therefore we must create a bootfs
that matches this.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>
Tim Harvey [Fri, 17 Feb 2023 22:03:45 +0000 (14:03 -0800)]
imx: image: ventana: use squashfs rootfs for non NAND devices
In order to support squashfs+ext4 define rootfstype=squashfs and use P2
as P1 is boot filesystem.
Signed-off-by: Tim Harvey <tharvey@gateworks.com>