git.openwrt.org Git - openwrt/staging/blogic.git/log

net/sched: act_skbedit: validate the control action inside init()

the following script:

# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action skbedit ptype host pass index 90
# tc actions replace action skbedit \
> ptype host goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action skbedit

had the following output:

Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1

         action order 0: skbedit  ptype host goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 3467 Comm: kworker/3:3 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffb50a81e1fad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9aa47ba4ea00 RCX: 0000000000000001
RDX: 0000000000000000 RSI: ffff9aa469eeb3c0 RDI: ffff9aa47ba4ea00
RBP: ffffb50a81e1fb70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffff9aa47bce0638 R12: ffff9aa4793b0c00
R13: ffff9aa4793b0c08 R14: 0000000000000001 R15: ffff9aa469eeb3c0
FS:  0000000000000000(0000) GS:ffff9aa474780000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007360e005 CR4: 00000000001606e0
Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
Modules linked in: act_skbedit veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep mbcache snd_hda_core jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev soundcore pcspkr virtio_balloon i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net net_failover drm failover virtio_blk virtio_console ata_piix virtio_pci crc32c_intel serio_raw libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000

Validating the control action within tcf_skbedit_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_simple: validate the control action inside init()

the following script:

# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action simple sdata hello pass index 90
# tc actions replace action simple \
> sdata world goto chain 42 index 90 cookie c1a0c1a0
# tc action show action simple

had the following output:

Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1

         action order 0: Simple <world>
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000006a6fb067 P4D 800000006a6fb067 PUD 6aed6067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 3241 Comm: kworker/2:0 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffbe6781763ad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9e59bdb80e00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9e59b4716738 RDI: ffff9e59ab12d140
RBP: ffffbe6781763b70 R08: 0000000000000234 R09: 0000000000aaaaaa
R10: 0000000000000000 R11: ffff9e59b247cd50 R12: ffff9e59b112f100
R13: ffff9e59b112f108 R14: 0000000000000001 R15: ffff9e59ab12d0c0
FS:  0000000000000000(0000) GS:ffff9e59b4700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000006af92004 CR4: 00000000001606e0
Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
Modules linked in: act_simple veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel ext4 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep mbcache snd_hda_core jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net ttm net_failover virtio_console virtio_blk failover drm crc32c_intel serio_raw floppy ata_piix libata virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000

Validating the control action within tcf_simple_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_sample: validate the control action inside init()

the following script:

# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action sample rate 1024 group 4 pass index 90
# tc actions replace action sample \
> rate 1024 group 4 goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action sample

had the following output:

Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1

         action order 0: sample rate 1/1024 group 4 goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 8000000079966067 P4D 8000000079966067 PUD 7987b067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 5 Comm: kworker/0:0 Not tainted 5.0.0-rc4.gotochain_crash+ #536
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffbee60033fad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff99d7ae6e3b00 RCX: 00000000e555df9b
RDX: 0000000000000000 RSI: 00000000b0352718 RDI: ffff99d7fda1fcf0
RBP: ffffbee60033fb70 R08: 0000000070731ab1 R09: 0000000000000400
R10: 0000000000000000 R11: ffff99d7ac733838 R12: ffff99d7f3c2be00
R13: ffff99d7f3c2be08 R14: 0000000000000001 R15: ffff99d7f3c2b600
FS:  0000000000000000(0000) GS:ffff99d7fda00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000797de006 CR4: 00000000001606f0
Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
Modules linked in: act_sample psample veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device aesni_intel crypto_simd snd_pcm cryptd glue_helper snd_timer joydev snd pcspkr virtio_balloon i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt fb_sys_fops net_failover ttm failover virtio_blk virtio_console drm ata_piix serio_raw crc32c_intel libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000

Validating the control action within tcf_sample_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_police: validate the control action inside init()

the following script:

# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action police rate 3mbit burst 250k pass index 90
# tc actions replace action police \
> rate 3mbit burst 250k goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action police rate 3mbit burst

had the following output:

Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1

         action order 0:  police 0x5a rate 3Mbit burst 250Kb mtu 2Kb  action goto chain 42 overhead 0b
         ref 2 bind 1
         cookie c1a0c1a0

Then, when crash0 starts transmitting more than 3Mbit/s, the following
kernel crash is observed:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000007a779067 P4D 800000007a779067 PUD 2ad96067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 5032 Comm: netperf Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffb0e04064fa60 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff93bb3322cce0 RCX: 0000000000000005
RDX: 0000000000000000 RSI: 0000000000000000 RDI: ffff93bb3322cce0
RBP: ffffb0e04064fb00 R08: 0000000000000022 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000001 R12: ffff93bb3beed300
R13: ffff93bb3beed308 R14: 0000000000000001 R15: ffff93bb3b64d000
FS:  00007f0bc6be5740(0000) GS:ffff93bb3db80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000746a8001 CR4: 00000000001606e0
Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ipt_do_table+0x31c/0x420 [ip_tables]
  ? ip_finish_output2+0x16f/0x430
  ip_finish_output2+0x16f/0x430
  ? ip_output+0x69/0xe0
  ip_output+0x69/0xe0
  ? ip_forward_options+0x1a0/0x1a0
  __tcp_transmit_skb+0x563/0xa40
  tcp_write_xmit+0x243/0xfa0
  __tcp_push_pending_frames+0x32/0xf0
  tcp_sendmsg_locked+0x404/0xd30
  tcp_sendmsg+0x27/0x40
  sock_sendmsg+0x36/0x40
  __sys_sendto+0x10e/0x140
  ? __sys_connect+0x87/0xf0
  ? syscall_trace_enter+0x1df/0x2e0
  ? __audit_syscall_exit+0x216/0x260
  __x64_sys_sendto+0x24/0x30
  do_syscall_64+0x5b/0x180
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f0bc5ffbafd
Code: 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 8b 05 ae c4 2c 00 85 c0 75 2d 45 31 c9 45 31 c0 4c 63 d1 48 63 ff b8 2c 00 00 00 0f 05 <48> 3d 00 f0 ff ff 77 01 c3 48 8b 15 63 63 2c 00 f7 d8 64 89 02 48
RSP: 002b:00007fffef94b7f8 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 0000000000004000 RCX: 00007f0bc5ffbafd
RDX: 0000000000004000 RSI: 00000000017e5420 RDI: 0000000000000004
RBP: 0000000000000000 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000004
R13: 00000000017e51d0 R14: 0000000000000010 R15: 0000000000000006
Modules linked in: act_police veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 snd_hda_codec_generic mbcache crct10dif_pclmul jbd2 crc32_pclmul ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper snd_timer snd joydev pcspkr virtio_balloon soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm virtio_blk virtio_net virtio_console net_failover failover crc32c_intel ata_piix libata serio_raw virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000

Validating the control action within tcf_police_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_pedit: validate the control action inside init()

the following script:

# tc filter add dev crash0 egress matchall \
> action pedit ex munge ip ttl set 10 pass index 90
# tc actions replace action pedit \
> ex munge ip ttl set 10 goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action pedit

had the following output:

Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1

         action order 0:  pedit action goto chain 42 keys 1
          index 90 ref 2 bind 1
          key #0  at ipv4+8: val 0a000000 mask 00ffffff
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff94a73db03be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff94a6ee4c0700 RCX: 000000000000000a
RDX: 0000000000000000 RSI: ffff94a6ed22c800 RDI: 0000000000000000
RBP: ffff94a73db03c80 R08: ffff94a7386fa4c8 R09: ffff94a73229ea20
R10: 0000000000000000 R11: 0000000000000000 R12: ffff94a6ed22cb00
R13: ffff94a6ed22cb08 R14: 0000000000000001 R15: ffff94a6ed22c800
FS:  0000000000000000(0000) GS:ffff94a73db00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007120e002 CR4: 00000000001606e0
Call Trace:
  <IRQ>
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip6_finish_output2+0x369/0x590
  ip6_finish_output2+0x369/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.35+0x79/0xc0
  mld_sendpack+0x16f/0x220
  mld_ifc_timer_expire+0x195/0x2c0
  ? igmp6_timer_handler+0x70/0x70
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? tick_sched_timer+0x37/0x70
  __do_softirq+0xe3/0x2f5
  irq_exit+0xf0/0x100
  smp_apic_timer_interrupt+0x6c/0x130
  apic_timer_interrupt+0xf/0x20
  </IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 4e ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffab1740387eb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffffb18184f0 RBX: 0000000000000002 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000002
RBP: 0000000000000002 R08: 000f168fa695f9a9 R09: 0000000000000020
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x1/0x1
  default_idle+0x1c/0x140
  do_idle+0x1c4/0x280
  cpu_startup_entry+0x19/0x20
  start_secondary+0x1a7/0x200
  secondary_startup_64+0xa4/0xb0
Modules linked in: act_pedit veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep aesni_intel snd_hda_core crypto_simd snd_seq cryptd glue_helper snd_seq_device snd_pcm joydev snd_timer pcspkr virtio_balloon snd soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs qxl ata_generic pata_acpi drm_kms_helper virtio_net net_failover syscopyarea sysfillrect sysimgblt failover virtio_blk fb_sys_fops virtio_console ttm drm crc32c_intel serio_raw ata_piix virtio_pci libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000

Validating the control action within tcf_pedit_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_nat: validate the control action inside init()

the following script:

# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action nat ingress 1.18.1.1 1.18.2.2 pass index 90
# tc actions replace action nat \
> ingress 1.18.1.1 1.18.2.2 goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action nat

had the following output:

Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1

         action order 0:  nat ingress 1.18.1.1/32 1.18.2.2 goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000002d180067 P4D 800000002d180067 PUD 7cb8b067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 164 Comm: kworker/3:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffae4500e2fad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9fa52e28c800 RCX: 0000000001011201
RDX: 0000000000000000 RSI: 0000000000000056 RDI: ffff9fa52ca12800
RBP: ffffae4500e2fb70 R08: 0000000000000022 R09: 000000000000000e
R10: 00000000ffffffff R11: 0000000001011201 R12: ffff9fa52cbc9c00
R13: ffff9fa52cbc9c08 R14: 0000000000000001 R15: ffff9fa52ca12780
FS:  0000000000000000(0000) GS:ffff9fa57db80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000073f8c004 CR4: 00000000001606e0
Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
Modules linked in: act_nat veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel mbcache jbd2 snd_hda_codec_generic snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper snd_timer snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs qxl ata_generic pata_acpi drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_net virtio_blk net_failover failover virtio_console drm crc32c_intel floppy ata_piix libata virtio_pci virtio_ring virtio serio_raw dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000

Validating the control action within tcf_nat_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_connmark: validate the control action inside init()

the following script:

# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action connmark pass index 90
# tc actions replace action connmark \
> goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action connmark

had the following output:

Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1

         action order 0: connmark zone 0 goto chain 42
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 302 Comm: kworker/0:2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff9bea406c3ad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff8c5dfc009f00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9bea406c3a80 RDI: ffff8c5dfb9d6ec0
RBP: ffff9bea406c3b70 R08: ffff8c5dfda222a0 R09: ffffffff90933c3c
R10: 0000000000000000 R11: 0000000092793f7d R12: ffff8c5df48b3c00
R13: ffff8c5df48b3c08 R14: 0000000000000001 R15: ffff8c5dfb9d6e40
FS:  0000000000000000(0000) GS:ffff8c5dfda00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000062e0e006 CR4: 00000000001606f0
Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
Modules linked in: act_connmark nf_conntrack nf_defrag_ipv6 nf_defrag_ipv4 veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul mbcache crc32_pclmul jbd2 snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel snd_timer crypto_simd cryptd snd glue_helper joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper virtio_net net_failover syscopyarea virtio_blk failover virtio_console sysfillrect sysimgblt fb_sys_fops ttm drm ata_piix crc32c_intel serio_raw libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000

Validating the control action within tcf_connmark_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_mirred: validate the control action inside init()

the following script:

# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action mirred ingress mirror dev lo pass
# tc actions replace action mirred \
> ingress mirror dev lo goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action mirred

had the following output:

Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1

         action order 0: mirred (Ingress Mirror to device lo) goto chain 42
         index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

Mirror/redirect action on
BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 3 PID: 47 Comm: kworker/3:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffa772404b7ad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9c5afc3f4300 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffff9c5afdba9380 RDI: 0000000000029380
RBP: ffffa772404b7b70 R08: ffff9c5af7010028 R09: ffff9c5af7010029
R10: 0000000000000000 R11: ffff9c5af94c6a38 R12: ffff9c5af7953000
R13: ffff9c5af7953008 R14: 0000000000000001 R15: ffff9c5af7953d00
FS:  0000000000000000(0000) GS:ffff9c5afdb80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007c514004 CR4: 00000000001606e0
Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
Modules linked in: act_mirred veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul snd_hda_codec_generic crc32_pclmul snd_hda_intel snd_hda_codec mbcache ghash_clmulni_intel jbd2 snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel snd_timer snd crypto_simd cryptd glue_helper soundcore virtio_balloon joydev pcspkr i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops virtio_net ttm virtio_blk net_failover virtio_console failover drm ata_piix crc32c_intel virtio_pci serio_raw libata virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000

Validating the control action within tcf_mirred_init() proved to fix the
above issue. For the same reason, postpone the assignment of tcfa_action
and tcfm_eaction to avoid partial reconfiguration of a mirred rule when
it's replaced by another one that mirrors to a device that does not
exist. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_ife: validate the control action inside init()

the following script:

# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action ife encode allow mark pass index 90
# tc actions replace action ife \
> encode allow mark goto chain 42 index 90 cookie c1a0c1a0
# tc action show action ife

had the following output:

IFE type 0xED3E
IFE type 0xED3E
Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1

         action order 0: ife encode action goto chain 42 type 0XED3E
         allow mark
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 800000007b4e7067 P4D 800000007b4e7067 PUD 7b4e6067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 164 Comm: kworker/2:1 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffa6a7c0553ad0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9796ee1bbd00 RCX: 0000000000000001
RDX: 0000000000000000 RSI: 0000000000000000 RDI: 0000000000000000
RBP: ffffa6a7c0553b70 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffff9797385bb038 R12: ffff9796ead9d700
R13: ffff9796ead9d708 R14: 0000000000000001 R15: ffff9796ead9d800
FS:  0000000000000000(0000) GS:ffff97973db00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000007c41e006 CR4: 00000000001606e0
Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ndisc_next_option+0x50/0x50
  ? ___neigh_create+0x4d5/0x680
  ? ip6_finish_output2+0x1b5/0x590
  ip6_finish_output2+0x1b5/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.28+0x79/0xc0
  ndisc_send_skb+0x248/0x2e0
  ndisc_send_ns+0xf8/0x200
  ? addrconf_dad_work+0x389/0x4b0
  addrconf_dad_work+0x389/0x4b0
  ? __switch_to_asm+0x34/0x70
  ? process_one_work+0x195/0x380
  ? addrconf_dad_completed+0x370/0x370
  process_one_work+0x195/0x380
  worker_thread+0x30/0x390
  ? process_one_work+0x380/0x380
  kthread+0x113/0x130
  ? kthread_park+0x90/0x90
  ret_from_fork+0x35/0x40
Modules linked in: act_gact act_meta_mark act_ife dummy veth ip6table_filter ip6_tables iptable_filter binfmt_misc snd_hda_codec_generic ext4 snd_hda_intel snd_hda_codec crct10dif_pclmul mbcache crc32_pclmul jbd2 snd_hwdep snd_hda_core ghash_clmulni_intel snd_seq snd_seq_device snd_pcm snd_timer aesni_intel crypto_simd snd cryptd glue_helper virtio_balloon joydev pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl virtio_net drm_kms_helper virtio_blk net_failover syscopyarea failover sysfillrect virtio_console sysimgblt fb_sys_fops ttm drm crc32c_intel serio_raw ata_piix virtio_pci virtio_ring libata virtio floppy dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_ife]
CR2: 0000000000000000

Validating the control action within tcf_ife_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_gact: validate the control action inside init()

the following script:

# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall \
> action gact pass index 90
# tc actions replace action gact \
> goto chain 42 index 90 cookie c1a0c1a0
# tc actions show action gact

had the following output:

Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1

         action order 0: gact action goto chain 42
          random type none pass val 0
          index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 0 P4D 0
Oops: 0000 [#1] SMP PTI
CPU: 2 PID: 0 Comm: swapper/2 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff8c2434703be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff8c23ed6d7e00 RCX: 000000000000005a
RDX: 0000000000000000 RSI: 0000000000000001 RDI: ffff8c23ed6d7e00
RBP: ffff8c2434703c80 R08: ffff8c243b639ac8 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000000 R12: ffff8c2429e68b00
R13: ffff8c2429e68b08 R14: 0000000000000001 R15: ffff8c2429c5a480
FS:  0000000000000000(0000) GS:ffff8c2434700000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 000000002dc0e005 CR4: 00000000001606e0
Call Trace:
  <IRQ>
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip6_finish_output2+0x369/0x590
  ip6_finish_output2+0x369/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.35+0x79/0xc0
  mld_sendpack+0x16f/0x220
  mld_ifc_timer_expire+0x195/0x2c0
  ? igmp6_timer_handler+0x70/0x70
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? tick_sched_timer+0x37/0x70
  __do_softirq+0xe3/0x2f5
  irq_exit+0xf0/0x100
  smp_apic_timer_interrupt+0x6c/0x130
  apic_timer_interrupt+0xf/0x20
  </IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 74 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffff9c8640387eb8 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffff8b2184f0 RBX: 0000000000000002 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000002
RBP: 0000000000000002 R08: 000eb57882b36cc3 R09: 0000000000000020
R10: 0000000000000004 R11: 0000000000000000 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x1/0x1
  default_idle+0x1c/0x140
  do_idle+0x1c4/0x280
  cpu_startup_entry+0x19/0x20
  start_secondary+0x1a7/0x200
  secondary_startup_64+0xa4/0xb0
Modules linked in: act_gact act_bpf veth ip6table_filter ip6_tables iptable_filter binfmt_misc crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic ext4 snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core mbcache jbd2 snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper virtio_balloon joydev pcspkr snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea virtio_net sysfillrect net_failover virtio_blk sysimgblt fb_sys_fops virtio_console ttm failover drm crc32c_intel serio_raw ata_piix libata floppy virtio_pci virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_bpf]
CR2: 0000000000000000

Validating the control action within tcf_gact_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_csum: validate the control action inside init()

the following script:

# tc qdisc add dev crash0 clsact
# tc filter add dev crash0 egress matchall action csum icmp pass index 90
# tc actions replace action csum icmp goto chain 42 index 90 \
> cookie c1a0c1a0
# tc actions show action csum

had the following output:

Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1

        action order 0: csum (icmp) action goto chain 42
        index 90 ref 2 bind 1
        cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000000
#PF error: [normal kernel read fault]
PGD 8000000074692067 P4D 8000000074692067 PUD 2e210067 PMD 0
Oops: 0000 [#1] SMP PTI
CPU: 0 PID: 0 Comm: swapper/0 Not tainted 5.0.0-rc4.gotochain_crash+ #533
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffff93153da03be0 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff9314ee40f700 RCX: 0000000000003a00
RDX: 0000000000000000 RSI: ffff931537c87828 RDI: ffff931537c87818
RBP: ffff93153da03c80 R08: 00000000527cffff R09: 0000000000000003
R10: 000000000000003f R11: 0000000000000028 R12: ffff9314edf68400
R13: ffff9314edf68408 R14: 0000000000000001 R15: ffff9314ed67b600
FS:  0000000000000000(0000) GS:ffff93153da00000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 0000000073e32003 CR4: 00000000001606f0
Call Trace:
  <IRQ>
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip6_finish_output2+0x369/0x590
  ip6_finish_output2+0x369/0x590
  ? ip6_output+0x68/0x110
  ip6_output+0x68/0x110
  ? nf_hook.constprop.35+0x79/0xc0
  mld_sendpack+0x16f/0x220
  mld_ifc_timer_expire+0x195/0x2c0
  ? igmp6_timer_handler+0x70/0x70
  call_timer_fn+0x2b/0x130
  run_timer_softirq+0x3e8/0x440
  ? tick_sched_timer+0x37/0x70
  __do_softirq+0xe3/0x2f5
  irq_exit+0xf0/0x100
  smp_apic_timer_interrupt+0x6c/0x130
  apic_timer_interrupt+0xf/0x20
  </IRQ>
RIP: 0010:native_safe_halt+0x2/0x10
Code: 66 ff ff ff 7f f3 c3 65 48 8b 04 25 00 5c 01 00 f0 80 48 02 20 48 8b 00 a8 08 74 8b eb c1 90 90 90 90 90 90 90 90 90 90 fb f4 <c3> 0f 1f 00 66 2e 0f 1f 84 00 00 00 00 00 f4 c3 90 90 90 90 90 90
RSP: 0018:ffffffff9a803e98 EFLAGS: 00000246 ORIG_RAX: ffffffffffffff13
RAX: ffffffff99e184f0 RBX: 0000000000000000 RCX: 0000000000000001
RDX: 0000000000000001 RSI: 0000000000000087 RDI: 0000000000000000
RBP: 0000000000000000 R08: 000eb5c4572376b3 R09: 0000000000000000
R10: ffffa53e806a3ca0 R11: 00000000000f4240 R12: 0000000000000000
R13: 0000000000000000 R14: 0000000000000000 R15: 0000000000000000
  ? __sched_text_end+0x1/0x1
  default_idle+0x1c/0x140
  do_idle+0x1c4/0x280
  cpu_startup_entry+0x19/0x20
  start_kernel+0x49e/0x4be
  secondary_startup_64+0xa4/0xb0
Modules linked in: act_csum veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 crct10dif_pclmul crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel mbcache snd_hda_codec jbd2 snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd snd_timer glue_helper snd joydev virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect virtio_net sysimgblt net_failover fb_sys_fops virtio_console virtio_blk ttm failover drm ata_piix crc32c_intel floppy virtio_pci serio_raw libata virtio_ring virtio dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000

Validating the control action within tcf_csum_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: act_bpf: validate the control action inside init()

the following script:

# tc filter add dev crash0 egress matchall \
> action bpf bytecode '1,6 0 0 4294967295' pass index 90
# tc actions replace action bpf \
> bytecode '1,6 0 0 4294967295' goto chain 42 index 90 cookie c1a0c1a0
# tc action show action bpf

had the following output:

Error: Failed to init TC action chain.
We have an error talking to the kernel
total acts 1

         action order 0: bpf bytecode '1,6 0 0 4294967295' default-action goto chain 42
         index 90 ref 2 bind 1
         cookie c1a0c1a0

Then, the first packet transmitted by crash0 made the kernel crash:

RIP: 0010:tcf_action_exec+0xb8/0x100
Code: 00 00 00 20 74 1d 83 f8 03 75 09 49 83 c4 08 4d 39 ec 75 bc 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3 49 8b 97 a8 00 00 00 <48> 8b 12 48 89 55 00 48 83 c4 10 5b 5d 41 5c 41 5d 41 5e 41 5f c3
RSP: 0018:ffffb3a0803dfa90 EFLAGS: 00010246
RAX: 000000002000002a RBX: ffff942b347ada00 RCX: 0000000000000000
RDX: 0000000000000000 RSI: ffffb3a08034d038 RDI: ffff942b347ada00
RBP: ffffb3a0803dfb30 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: ffffb3a0803dfb0c R12: ffff942b3b682b00
R13: ffff942b3b682b08 R14: 0000000000000001 R15: ffff942b3b682f00
FS:  00007f6160a72740(0000) GS:ffff942b3da80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000000 CR3: 00000000795a4002 CR4: 00000000001606e0
Call Trace:
  tcf_classify+0x58/0x120
  __dev_queue_xmit+0x40a/0x890
  ? ip_finish_output2+0x16f/0x430
  ip_finish_output2+0x16f/0x430
  ? ip_output+0x69/0xe0
  ip_output+0x69/0xe0
  ? ip_forward_options+0x1a0/0x1a0
  ip_send_skb+0x15/0x40
  raw_sendmsg+0x8e1/0xbd0
  ? sched_clock+0x5/0x10
  ? sched_clock_cpu+0xc/0xa0
  ? try_to_wake_up+0x54/0x480
  ? ldsem_down_read+0x3f/0x280
  ? _cond_resched+0x15/0x40
  ? down_read+0xe/0x30
  ? copy_termios+0x1e/0x70
  ? tty_mode_ioctl+0x1b6/0x4c0
  ? sock_sendmsg+0x36/0x40
  sock_sendmsg+0x36/0x40
  __sys_sendto+0x10e/0x140
  ? do_vfs_ioctl+0xa4/0x640
  ? handle_mm_fault+0xdc/0x210
  ? syscall_trace_enter+0x1df/0x2e0
  ? __audit_syscall_exit+0x216/0x260
  __x64_sys_sendto+0x24/0x30
  do_syscall_64+0x5b/0x180
  entry_SYSCALL_64_after_hwframe+0x44/0xa9
RIP: 0033:0x7f615f7e3c03
Code: 48 8b 0d 90 62 2c 00 f7 d8 64 89 01 48 83 c8 ff c3 66 0f 1f 44 00 00 83 3d 9d c3 2c 00 00 75 13 49 89 ca b8 2c 00 00 00 0f 05 <48> 3d 01 f0 ff ff 73 34 c3 48 83 ec 08 e8 4b cc 00 00 48 89 04 24
RSP: 002b:00007ffee5d8cc28 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 000055a4f28f1700 RCX: 00007f615f7e3c03
RDX: 0000000000000040 RSI: 000055a4f28f1700 RDI: 0000000000000003
RBP: 00007ffee5d8e340 R08: 000055a4f28ee510 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 0000000000000040
R13: 000055a4f28f16c0 R14: 000055a4f28ef69c R15: 0000000000000080
Modules linked in: act_bpf veth ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache crct10dif_pclmul jbd2 crc32_pclmul snd_hda_codec_generic ghash_clmulni_intel snd_hda_intel snd_hda_codec snd_hwdep snd_hda_core snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd cryptd glue_helper pcspkr joydev virtio_balloon snd_timer snd i2c_piix4 soundcore nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs ata_generic pata_acpi qxl drm_kms_helper virtio_blk virtio_net virtio_console net_failover failover syscopyarea sysfillrect sysimgblt fb_sys_fops ttm drm crc32c_intel ata_piix serio_raw libata virtio_pci virtio_ring virtio floppy dm_mirror dm_region_hash dm_log dm_mod
CR2: 0000000000000000

Validating the control action within tcf_bpf_init() proved to fix the
above issue. A TDC selftest is added to verify the correct behavior.

Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/sched: prepare TC actions to properly validate the control action

- pass a pointer to struct tcf_proto in each actions's init() handler,
  to allow validating the control action, checking whether the chain
  exists and (eventually) refcounting it.
- remove code that validates the control action after a successful call
  to the action's init() handler, and replace it with a test that forbids
  addition of actions having 'goto_chain' and NULL goto_chain pointer at
  the same time.
- add tcf_action_check_ctrlact(), that will validate the control action
  and eventually allocate the action 'goto_chain' within the init()
  handler.
- add tcf_action_set_ctrlact(), that will assign the control action and
  swap the current 'goto_chain' pointer with the new given one.

This disallows 'goto_chain' on actions that don't initialize it properly
in their init() handler, i.e. calling tcf_action_check_ctrlact() after
successful IDR reservation and then calling tcf_action_set_ctrlact()
to assign 'goto_chain' and 'tcf_action' consistently.

By doing this, the kernel does not leak anymore refcounts when a valid
'goto chain' handle is replaced in TC actions, causing kmemleak splats
like the following one:

# tc chain add dev dd0 chain 42 ingress protocol ip flower \
> ip_proto tcp action drop
# tc chain add dev dd0 chain 43 ingress protocol ip flower \
> ip_proto udp action drop
# tc filter add dev dd0 ingress matchall \
> action gact goto chain 42 index 66
# tc filter replace dev dd0 ingress matchall \
> action gact goto chain 43 index 66
# echo scan >/sys/kernel/debug/kmemleak
<...>
unreferenced object 0xffff93c0ee09f000 (size 1024):
comm "tc", pid 2565, jiffies 4295339808 (age 65.426s)
hex dump (first 32 bytes):
   00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00  ................
   00 00 00 00 08 00 06 00 00 00 00 00 00 00 00 00  ................
backtrace:
   [<000000009b63f92d>] tc_ctl_chain+0x3d2/0x4c0
   [<00000000683a8d72>] rtnetlink_rcv_msg+0x263/0x2d0
   [<00000000ddd88f8e>] netlink_rcv_skb+0x4a/0x110
   [<000000006126a348>] netlink_unicast+0x1a0/0x250
   [<00000000b3340877>] netlink_sendmsg+0x2c1/0x3c0
   [<00000000a25a2171>] sock_sendmsg+0x36/0x40
   [<00000000f19ee1ec>] ___sys_sendmsg+0x280/0x2f0
   [<00000000d0422042>] __sys_sendmsg+0x5e/0xa0
   [<000000007a6c61f9>] do_syscall_64+0x5b/0x180
   [<00000000ccd07542>] entry_SYSCALL_64_after_hwframe+0x44/0xa9
   [<0000000013eaa334>] 0xffffffffffffffff

Fixes: db50514f9a9c ("net: sched: add termination action to allow goto chain")
Fixes: 97763dc0f401 ("net_sched: reject unknown tcfa_action values")
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: macb: Add null check for PCLK and HCLK

Both PCLK and HCLK are "required" clocks according to macb devicetree
documentation. There is a chance that devm_clk_get doesn't return a
negative error but just a NULL clock structure instead. In such a case
the driver proceeds as usual and uses pclk value 0 to calculate MDC
divisor which is incorrect. Hence fix the same in clock initialization.

Signed-off-by: Harini Katakam <harini.katakam@xilinx.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: Add DP83825I to the DP83822 driver

Add the DP83825I ethernet PHY to the DP83822 driver.
These devices share the same WoL register bits and addresses.

The phy_driver init was made into a macro as there may be future
devices appended to this driver that will share the register space.

http://www.ti.com/lit/gpn/dp83825i

Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: Dan Murphy <dmurphy@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/pablo/nf

Pablo Neira Ayuso says:

====================
Netfilter fixes for net

The following patchset contains Netfilter fixes for your net tree:

1) Remove a direct dependency with IPv6 introduced by the
   sip_external_media feature, from Alin Nastac.

2) Fix bogus ENOENT when removing interval elements from set.

3) Set transport_header from br_netfilter to mimic the stack
   behaviour, this partially fixes a checksum validation bug
   from the SCTP connection tracking, from Xin Long.

4) Fix undefined reference to symbol in xt_TEE, due to missing
   Kconfig dependencies, from Arnd Bergmann.

5) Check for NULL in skb_header_pointer() calls in ip6t_shr,
   from Kangjie Lu.

6) Fix bogus EBUSY when removing an existing conntrack helper from
   a transaction.

7) Fix module autoload of the redirect extension.

8) Remove duplicated transition in flowtable diagram in the existing
   documentation.

9) Missing .release_ops call from error path in newrule() which
   results module refcount leak, from Taehee Yoo.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

genetlink: Fix a memory leak on error path

In genl_register_family(), when idr_alloc() fails,
we forget to free the memory we possibly allocate for
family->attrbuf.

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: 2ae0f17df1cd ("genetlink: use idr to track families")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Reviewed-by: Kirill Tkhai <ktkhai@virtuozzo.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: fix cancellation of topology subscriptions

When cancelling a subscription, we have to clear the cancel bit in the
request before iterating over any established subscriptions with memcmp.
Otherwise no subscription will ever be found, and it will not be
possible to explicitly unsubscribe individual subscriptions.

Fixes: 8985ecc7c1e0 ("tipc: simplify endianness handling in topology subscriber")
Signed-off-by: Erik Hugne <erik.hugne@gmail.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dpaa2-eth: Fix possible access beyond end of array

Make sure we don't try to enqueue XDP_REDIRECT frames to an
inexistent FQ.

While it is guaranteed not to have more than one queue per core,
having fewer queues than CPUs on an interface is a valid
configuration.

Fixes: d678be1dc1ec ("dpaa2-eth: add XDP_REDIRECT support")
Reported-by: Jesper Dangaard Brouer <brouer@redhat.com>
Signed-off-by: Ioana Radulescu <ruxandra.radulescu@nxp.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ks8851-fixes'

Lukas Wunner says:

====================
ks8851 fixes & cleanups

Four fixes and two cleanups for the Microchip (formerly Micrel) KSZ8851
SPI Ethernet driver.

Some of the fixes might even pass as stable material, but I haven't marked
them as such for cautiousness: Doesn't hurt letting them bake in linux-next
for a few weeks to raise the confidence, even though we've tested them
extensively on our Revolution Pi open source PLCs.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: ks8851: Deduplicate register macros

The ks8851 chip is sold either with an SPI interface (KSZ8851SNL) or
with a so-called non-PCI interface (KSZ8851-16MLL). When the driver
for the latter was introduced with commit a55c0a0ed415 ("drivers/net:
ks8851_mll ethernet network driver"), it duplicated the register macros
introduced by the driver for the former with commit 3ba81f3ece3c ("net:
Micrel KS8851 SPI network driver").

The chips are almost identical, so the duplication seems unwarranted.
There are a handful of bits which are in use on the KSZ8851-16MLL but
reserved on the KSZ8851SNL, and vice-versa, but there are no actual
collisions.

Thus, remove the duplicate definitions from the KSZ8851-16MLL driver.
Mark all bits which differ between the two chips. Move the SPI frame
opcodes, which are specific to KSZ8851SNL, to its driver.

The KSZ8851-16MLL driver added a RXFCTR_THRESHOLD_MASK macro which is a
duplication of the RXFCTR_RXFCT_MASK macro, rename it where it's used.
Same for P1MBCR_FORCE_FDX, which duplicates the BMCR_FULLDPLX macro and
OBCR_ODS_16MA, which duplicates OBCR_ODS_16mA.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ks8851: Fix register macro misnomers

In the header file accompanying the ks8851 driver, the P1SCLMD register
macros are misnamed, they actually pertain to the P1CR register.

The P1CR macros in turn pertain to the P1SR register, see pages 65 to 68
of the spec:
http://www.hqchip.com/uploads/pdf/201703/47c98946d6c97a4766e14db3f24955f2.pdf

The misnomers have no negative consequences so far because the macros
aren't used by ks8851.c, but that's about to change.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ks8851: Set initial carrier state to down

The ks8851 chip's initial carrier state is down. A Link Change Interrupt
is signaled once interrupts are enabled if the carrier is up.

The ks8851 driver has it backwards by assuming that the initial carrier
state is up. The state is therefore misrepresented if the interface is
opened with no cable attached. Fix it.

The Link Change interrupt is sometimes not signaled unless the P1MBSR
register (which contains the Link Status bit) is read on ->ndo_open().
This might be a hardware erratum. Read the register by calling
mii_check_link(), which has the desirable side effect of setting the
carrier state to down if the cable was detached while the interface was
closed.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ks8851: Delay requesting IRQ until opened

The ks8851 driver currently requests the IRQ before registering the
net_device.  Because the net_device name is used as IRQ name and is
still "eth%d" when the IRQ is requested, it's impossibe to tell IRQs
apart if multiple ks8851 chips are present.  Most other drivers delay
requesting the IRQ until the net_device is opened.  Do the same.

The driver doesn't enable interrupts on the chip before opening the
net_device and disables them when closing it, so there doesn't seem to
be a need to request the IRQ already on probe.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ks8851: Reassert reset pin if chip ID check fails

Commit 73fdeb82e963 ("net: ks8851: Add optional vdd_io regulator and
reset gpio") amended the ks8851 driver to briefly assert the chip's
reset pin on probe. It also amended the probe routine's error path to
reassert the reset pin if a subsequent initialization step fails.

However the commit misplaced reassertion of the reset pin in the error
path such that it is not performed if the check of the Chip ID and
Enable Register (CIDER) fails. The error path is therefore slightly
asymmetrical to the probe routine's body. Fix it.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Nishanth Menon <nm@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ks8851: Dequeue RX packets explicitly

The ks8851 driver lets the chip auto-dequeue received packets once they
have been read in full. It achieves that by setting the ADRFE flag in
the RXQCR register ("Auto-Dequeue RXQ Frame Enable").

However if allocation of a packet's socket buffer or retrieval of the
packet over the SPI bus fails, the packet will not have been read in
full and is not auto-dequeued. Such partial retrieval of a packet
confuses the chip's RX queue management: On the next RX interrupt,
the first packet read from the queue will be the one left there
previously and this one can be retrieved without issues. But for any
newly received packets, the frame header status and byte count registers
(RXFHSR and RXFHBCR) contain bogus values, preventing their retrieval.

The chip allows explicitly dequeueing a packet from the RX queue by
setting the RRXEF flag in the RXQCR register ("Release RX Error Frame").
This could be used to dequeue the packet in case of an error, but if
that error is a failed SPI transfer, it is unknown if the packet was
transferred in full and was auto-dequeued or if it was only transferred
in part and requires an explicit dequeue. The safest approach is thus
to always dequeue packets explicitly and forgo auto-dequeueing.

Without this change, I've witnessed packet retrieval break completely
when an SPI DMA transfer fails, requiring a chip reset. Explicit
dequeueing magically fixes this and makes packet retrieval absolutely
robust for me.

The chip's documentation suggests auto-dequeuing and uses the RRXEF
flag only to dequeue error frames which the driver doesn't want to
retrieve. But that seems to be a fair-weather approach.

Signed-off-by: Lukas Wunner <lukas@wunner.de>
Cc: Frank Pavlic <f.pavlic@kunbus.de>
Cc: Ben Dooks <ben.dooks@codethink.co.uk>
Cc: Tristram Ha <Tristram.Ha@microchip.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: use memdup_user instead of vmemdup_user

In sctp_setsockopt_bindx()/__sctp_setsockopt_connectx(), it allocates
memory with addrs_size which is passed from userspace. We used flag
GFP_USER to put some more restrictions on it in Commit cacc06215271
("sctp: use GFP_USER for user-controlled kmalloc").

However, since Commit c981f254cc82 ("sctp: use vmemdup_user() rather
than badly open-coding memdup_user()"), vmemdup_user() has been used,
which doesn't check GFP_USER flag when goes to vmalloc_*(). So when
addrs_size is a huge value, it could exhaust memory and even trigger
oom killer.

This patch is to use memdup_user() instead, in which GFP_USER would
work to limit the memory allocation with a huge addrs_size.

Note we can't fix it by limiting 'addrs_size', as there's no demand
for it from RFC.

Reported-by: syzbot+ec1b7575afef85a0e5ca@syzkaller.appspotmail.com
Fixes: c981f254cc82 ("sctp: use vmemdup_user() rather than badly open-coding memdup_user()")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: make ip6_create_rt_rcu return ip6_null_entry instead of NULL

Jianlin reported a crash:

  [  381.484332] BUG: unable to handle kernel NULL pointer dereference at 0000000000000068
  [  381.619802] RIP: 0010:fib6_rule_lookup+0xa3/0x160
  [  382.009615] Call Trace:
  [  382.020762]  <IRQ>
  [  382.030174]  ip6_route_redirect.isra.52+0xc9/0xf0
  [  382.050984]  ip6_redirect+0xb6/0xf0
  [  382.066731]  icmpv6_notify+0xca/0x190
  [  382.083185]  ndisc_redirect_rcv+0x10f/0x160
  [  382.102569]  ndisc_rcv+0xfb/0x100
  [  382.117725]  icmpv6_rcv+0x3f2/0x520
  [  382.133637]  ip6_input_finish+0xbf/0x460
  [  382.151634]  ip6_input+0x3b/0xb0
  [  382.166097]  ipv6_rcv+0x378/0x4e0

It was caused by the lookup function __ip6_route_redirect() returns NULL in
fib6_rule_lookup() when ip6_create_rt_rcu() returns NULL.

So we fix it by simply making ip6_create_rt_rcu() return ip6_null_entry
instead of NULL.

v1->v2:
  - move down 'fallback:' to make it more readable.

Fixes: e873e4b9cc7e ("ipv6: use fib6_info_hold_safe() when necessary")
Reported-by: Jianlin Shi <jishi@redhat.com>
Suggested-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Reviewed-by: David Ahern <dsahern@gmail.com>
Acked-by: Wei Wang <weiwan@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/packet: Set __GFP_NOWARN upon allocation in alloc_pg_vec

Since commit fc62814d690c ("net/packet: fix 4gb buffer limit due to overflow check")
one can now allocate packet ring buffers >= UINT_MAX. However, syzkaller
found that that triggers a warning:

[   21.100000] WARNING: CPU: 2 PID: 2075 at mm/page_alloc.c:4584 __alloc_pages_nod0
[   21.101490] Modules linked in:
[   21.101921] CPU: 2 PID: 2075 Comm: syz-executor.0 Not tainted 5.0.0 #146
[   21.102784] Hardware name: QEMU Standard PC (i440FX + PIIX, 1996), BIOS 0.5.1 01/01/2011
[   21.103887] RIP: 0010:__alloc_pages_nodemask+0x2a0/0x630
[   21.104640] Code: fe ff ff 65 48 8b 04 25 c0 de 01 00 48 05 90 0f 00 00 41 bd 01 00 00 00 48 89 44 24 48 e9 9c fe 3
[   21.107121] RSP: 0018:ffff88805e1cf920 EFLAGS: 00010246
[   21.107819] RAX: 0000000000000000 RBX: ffffffff85a488a0 RCX: 0000000000000000
[   21.108753] RDX: 0000000000000000 RSI: dffffc0000000000 RDI: 0000000000000000
[   21.109699] RBP: 1ffff1100bc39f28 R08: ffffed100bcefb67 R09: ffffed100bcefb67
[   21.110646] R10: 0000000000000001 R11: ffffed100bcefb66 R12: 000000000000000d
[   21.111623] R13: 0000000000000000 R14: ffff88805e77d888 R15: 000000000000000d
[   21.112552] FS:  00007f7c7de05700(0000) GS:ffff88806d100000(0000) knlGS:0000000000000000
[   21.113612] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
[   21.114405] CR2: 000000000065c000 CR3: 000000005e58e006 CR4: 00000000001606e0
[   21.115367] Call Trace:
[   21.115705]  ? __alloc_pages_slowpath+0x21c0/0x21c0
[   21.116362]  alloc_pages_current+0xac/0x1e0
[   21.116923]  kmalloc_order+0x18/0x70
[   21.117393]  kmalloc_order_trace+0x18/0x110
[   21.117949]  packet_set_ring+0x9d5/0x1770
[   21.118524]  ? packet_rcv_spkt+0x440/0x440
[   21.119094]  ? lock_downgrade+0x620/0x620
[   21.119646]  ? __might_fault+0x177/0x1b0
[   21.120177]  packet_setsockopt+0x981/0x2940
[   21.120753]  ? __fget+0x2fb/0x4b0
[   21.121209]  ? packet_release+0xab0/0xab0
[   21.121740]  ? sock_has_perm+0x1cd/0x260
[   21.122297]  ? selinux_secmark_relabel_packet+0xd0/0xd0
[   21.123013]  ? __fget+0x324/0x4b0
[   21.123451]  ? selinux_netlbl_socket_setsockopt+0x101/0x320
[   21.124186]  ? selinux_netlbl_sock_rcv_skb+0x3a0/0x3a0
[   21.124908]  ? __lock_acquire+0x529/0x3200
[   21.125453]  ? selinux_socket_setsockopt+0x5d/0x70
[   21.126075]  ? __sys_setsockopt+0x131/0x210
[   21.126533]  ? packet_release+0xab0/0xab0
[   21.127004]  __sys_setsockopt+0x131/0x210
[   21.127449]  ? kernel_accept+0x2f0/0x2f0
[   21.127911]  ? ret_from_fork+0x8/0x50
[   21.128313]  ? do_raw_spin_lock+0x11b/0x280
[   21.128800]  __x64_sys_setsockopt+0xba/0x150
[   21.129271]  ? lockdep_hardirqs_on+0x37f/0x560
[   21.129769]  do_syscall_64+0x9f/0x450
[   21.130182]  entry_SYSCALL_64_after_hwframe+0x49/0xbe

We should allocate with __GFP_NOWARN to handle this.

Cc: Kal Conley <kal.conley@dectris.com>
Cc: Andrey Konovalov <andreyknvl@google.com>
Fixes: fc62814d690c ("net/packet: fix 4gb buffer limit due to overflow check")
Signed-off-by: Christoph Paasch <cpaasch@apple.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: nf_tables: add missing ->release_ops() in error path of newrule()

->release_ops() callback releases resources and this is used in error path.
If nf_tables_newrule() fails after ->select_ops(), it should release
resources. but it can not call ->destroy() because that should be called
after ->init().
At this point, ->release_ops() should be used for releasing resources.

Test commands:
   modprobe -rv xt_tcpudp
   iptables-nft -I INPUT -m tcp   <-- error command
   lsmod

Result:
   Module                  Size  Used by
   xt_tcpudp              20480  2      <-- it should be 0

Fixes: b8e204006340 ("netfilter: nft_compat: use .release_ops and remove list of extension")
Signed-off-by: Taehee Yoo <ap420073@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

mpls: Fix 6PE forwarding

This patch adds support for 6PE (RFC 4798) which uses IPv4-mapped IPv6
nexthop to connect IPv6 islands over IPv4 only MPLS network core.

Prior to this fix, to find the link-layer destination mac address, 6PE
enabled host/router was sending IPv6 ND requests for IPv4-mapped IPv6
nexthop address over the interface facing the IPv4 only core which
wouldn't success as the core is IPv6 free.

This fix changes that behavior on 6PE host to treat the nexthop as IPv4
address and send ARP requests whenever the next-hop address is an
IPv4-mapped IPv6 address.

Below topology illustrates the issue and how the patch addresses it.

abcd::1.1.1.1 (lo)                                              abcd::2.2.2.2 (lo)
R0 (PE/host)------------------------R1--------------------------------R2 (PE/host)
            <--- IPv4 MPLS core --->   <------ IPv4 MPLS core -------->
           eth1               eth2       eth3                       eth4
          172.18.0.10     172.18.0.11   172.19.0.11              172.19.0.12
    ffff::172.18.0.10                                      ffff::172.19.0.12
            <------------------IPv6 MPLS tunnel ---------------------->

R0 and R2 act as 6PE routers of IPv6 islands. R1 is IPv4 only with MPLS tunnels
between R0,R1 and R1,R2.

docker exec r0 ip -f inet6 route add abcd::2.2.2.2/128 nexthop encap mpls 100 via ::ffff:172.18.0.11 dev eth1
docker exec r2 ip -f inet6 route add abcd::1.1.1.1/128 nexthop encap mpls 200 via ::ffff:172.19.0.11 dev eth4

docker exec r1 ip -f mpls route add 100 via inet 172.19.0.12 dev eth3
docker exec r1 ip -f mpls route add 200 via inet 172.18.0.10 dev eth2

With the change, when R0 sends an IPv6 packet over MPLS tunnel to abcd::2.2.2.2,
using ::ffff:172.18.0.11 as the nexthop, it does neighbor discovery for
172.18.18.0.11.

Signed-off-by: Vinay K Nallamothu <nvinay@juniper.net>
Tested-by: Avinash Lingala <ar977m@att.com>
Tested-by: Aravind Srinivas Srinivasa Prabhakar <aprabh@juniper.net>
Signed-off-by: David S. Miller <davem@davemloft.net>

3c515: fix integer overflow warning

clang points out a harmless signed integer overflow:

drivers/net/ethernet/3com/3c515.c:1530:66: error: implicit conversion from 'int' to 'short' changes value from 32783 to -32753 [-Werror,-Wconstant-conversion]
                new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast | RxProm;
                         ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~
drivers/net/ethernet/3com/3c515.c:1532:52: error: implicit conversion from 'int' to 'short' changes value from 32775 to -32761 [-Werror,-Wconstant-conversion]
                new_mode = SetRxFilter | RxStation | RxMulticast | RxBroadcast;
                         ~ ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~
drivers/net/ethernet/3com/3c515.c:1534:38: error: implicit conversion from 'int' to 'short' changes value from 32773 to -32763 [-Werror,-Wconstant-conversion]
                new_mode = SetRxFilter | RxStation | RxBroadcast;
                         ~ ~~~~~~~~~~~~~~~~~~~~~~~~^~~~~~~~~~~~~

Make the variable unsigned to avoid the overflow.

Fixes: Linux-2.1.128pre1
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

dccp: do not use ipv6 header for ipv4 flow

When a dual stack dccp listener accepts an ipv4 flow,
it should not attempt to use an ipv6 header or
inet6_iif() helper.

Fixes: 3df80d9320bc ("[DCCP]: Introduce DCCPv6")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tcp: do not use ipv6 header for ipv4 flow

When a dual stack tcp listener accepts an ipv4 flow,
it should not attempt to use an ipv6 header or tcp_v6_iif() helper.

Fixes: 1397ed35f22d ("ipv6: add flowinfo for tcp6 pkt_options for all cases")
Fixes: df3687ffc665 ("ipv6: add the IPV6_FL_F_REFLECT flag to IPV6_FL_A_GET")
Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfc: Fix to check for kmemdup failure

In case of kmemdup failure while setting the service name the patch
returns -ENOMEM upstream for processing.

Signed-off-by: Aditya Pakki <pakki001@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

net-sysfs: call dev_hold if kobject_init_and_add success

In netdev_queue_add_kobject and rx_queue_add_kobject,
if sysfs_create_group failed, kobject_put will call
netdev_queue_release to decrease dev refcont, however
dev_hold has not be called. So we will see this while
unregistering dev:

unregister_netdevice: waiting for bcsh0 to become free. Usage count = -1

Reported-by: Hulk Robot <hulkci@huawei.com>
Fixes: d0d668371679 ("net: don't decrement kobj reference count on init failure")
Signed-off-by: YueHaibing <yuehaibing@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: stmmac: fix memory corruption with large MTUs

When using 16K DMA buffers and ring mode, the DES3 refill is not working
correctly as the function is using a bogus pointer for checking the
private data. As a result stale pointers will remain in the RX descriptor
ring, so DMA will now likely overwrite/corrupt some already freed memory.

As simple reproducer, just receive some UDP traffic:

# ifconfig eth0 down; ifconfig eth0 mtu 9000; ifconfig eth0 up
# iperf3 -c 192.168.253.40 -u -b 0 -R

If you didn't crash by now check the RX descriptors to find non-contiguous
RX buffers:

cat /sys/kernel/debug/stmmaceth/eth0/descriptors_status
[...]
1 [0x2be5020]: 0xa3220321 0x9ffc1ffc 0x72d70082 0x130e207e
^^^^^^^^^^^^^^^^^^^^^
2 [0x2be5040]: 0xa3220321 0x9ffc1ffc 0x72998082 0x1311a07e
^^^^^^^^^^^^^^^^^^^^^

A simple ping test will now report bad data:

# ping -s 8200 192.168.253.40
PING 192.168.253.40 (192.168.253.40) 8200(8228) bytes of data.
8208 bytes from 192.168.253.40: icmp_seq=1 ttl=64 time=1.00 ms
wrong data byte #8144 should be 0xd0 but was 0x88

Fix the wrong pointer. Also we must refill DES3 only if the DMA buffer
size is 16K.

Fixes: 54139cf3bb33 ("net: stmmac: adding multiple buffers for rx")
Signed-off-by: Aaro Koskinen <aaro.koskinen@nokia.com>
Acked-by: Jose Abreu <joabreu@synopsys.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mlxsw: core: mlxsw: core: avoid -Wint-in-bool-context warning

A recently added function in mlxsw triggers a harmless compiler warning:

In file included from drivers/net/ethernet/mellanox/mlxsw/core.h:17,
                 from drivers/net/ethernet/mellanox/mlxsw/core_env.c:7:
drivers/net/ethernet/mellanox/mlxsw/core_env.c: In function 'mlxsw_env_module_temp_thresholds_get':
drivers/net/ethernet/mellanox/mlxsw/reg.h:8015:45: error: '*' in boolean context, suggest '&&' instead [-Werror=int-in-bool-context]
#define MLXSW_REG_MTMP_TEMP_TO_MC(val) (val * 125)
                                        ~~~~~^~~~~~
drivers/net/ethernet/mellanox/mlxsw/core_env.c:116:8: note: in expansion of macro 'MLXSW_REG_MTMP_TEMP_TO_MC'
   if (!MLXSW_REG_MTMP_TEMP_TO_MC(module_temp)) {
        ^~~~~~~~~~~~~~~~~~~~~~~~~

The warning is normally disabled, but it would be nice to enable
it to find real bugs, and there are no other known instances at
the moment.

Replace the negation with a zero-comparison, which also matches
the comment above it.

Fixes: d93c19a1d95c ("mlxsw: core: Add API for QSFP module temperature thresholds reading")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'wireless-drivers-for-davem-2019-03-19' of git://git./linux/kernel/git/kvalo/wireless-drivers

Kalle Valo says:

====================
wireless-drivers fixes for 5.1

First set of fixes for 5.1. Lots of fixes for mt76 this time.

iwlwifi

* fix warning with do_div()

mt7601u

* avoid using hardware which is supported by mt76

mt76

* more fixes for hweight8() usage

* fix hardware restart for mt76x2

* fix writing txwi on USB devices

* fix (and disable by default) ED/CCA support on 76x2

* fix powersave issues on 7603

* fix return value check for ioremap on 7603

* fix duplicate USB device IDs
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ieee802154-for-davem-2019-03-19' of git://git./linux/kernel/git/sschmidt/wpan

Stefan Schmidt says:

====================
pull-request: ieee802154 for net 2019-03-19

An update from ieee802154 for your *net* tree.

Kangjie Lu fixed a potential NULL pointer deref in the adf7242 driver and Li
RongQing make sure we propagate a netlink return code to the caller.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

mt76x02: do not enable RTS/CTS by default

My commit 26a7b5473191 ("mt76x02: set protection according to ht
operation element") enabled by default RTS/CTS protection for OFDM
and CCK traffic, because MT_TX_RTS_CFG_THRESH is configured to non
0xffff by initvals and .set_rts_threshold callback is not called by
mac80211 on initialization, only on user request or during
ieee80211_reconfig() (suspend/resuem or restart_hw).

Enabling RTS/CTS cause some problems when sending probe request
frames by hcxdumptool penetration tool, but I expect it can cause
other issues on different scenarios.

Restore previous setting of RTS/CTS being disabled by default for
OFDM/CCK by changing MT_TX_RTS_CFG_THRESH initvals to 0xffff.

Fixes: 26a7b5473191 ("mt76x02: set protection according to ht operation element")
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

mt76: fix schedule while atomic in mt76x02_reset_state

Fix following schedule while atomic in mt76x02_reset_state
since synchronize_rcu is run inside a RCU section

[44036.944222] mt76x2e 0000:06:00.0: MCU message 31 (seq 3) timed out
[44036.944281] BUG: sleeping function called from invalid context at kernel/rcu/tree_exp.h:818
[44036.944284] in_atomic(): 1, irqs_disabled(): 0, pid: 28066, name: kworker/u4:1
[44036.944287] INFO: lockdep is turned off.
[44036.944292] CPU: 1 PID: 28066 Comm: kworker/u4:1 Tainted: G        W         5.0.0-rc7-wdn-t1+ #7
[44036.944294] Hardware name: Dell Inc. Studio XPS 1340/0K183D, BIOS A11 09/08/2009
[44036.944305] Workqueue: phy1 mt76x02_wdt_work [mt76x02_lib]
[44036.944308] Call Trace:
[44036.944317]  dump_stack+0x67/0x90
[44036.944322]  ___might_sleep.cold.88+0x9f/0xaf
[44036.944327]  rcu_blocking_is_gp+0x13/0x50
[44036.944330]  synchronize_rcu+0x17/0x80
[44036.944337]  mt76_sta_state+0x138/0x1d0 [mt76]
[44036.944349]  mt76x02_wdt_work+0x1c9/0x610 [mt76x02_lib]
[44036.944355]  process_one_work+0x2a5/0x620
[44036.944361]  worker_thread+0x35/0x3e0
[44036.944368]  kthread+0x11c/0x140
[44036.944376]  ret_from_fork+0x3a/0x50
[44036.944384] BUG: scheduling while atomic: kworker/u4:1/28066/0x00000002
[44036.944387] INFO: lockdep is turned off.
[44036.944389] Modules linked in: cmac ctr ccm af_packet snd_hda_codec_hdmi

Introduce __mt76_sta_remove in order to run sta_remove without holding dev->mutex.
Move __mt76_sta_remove outside of RCU section in mt76x02_reset_state

Fixes: e4ebb8b403d1 ("mt76: mt76x2: implement full device restart on watchdog reset")
Signed-off-by: Lorenzo Bianconi <lorenzo@kernel.org>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

mt76: mt7603: use the correct hweight8() function

__sw_hweight8() is only defined if CONFIG_GENERIC_HWEIGHT is enabled.
The function that works on all architectures is hweight8().

Signed-off-by: Felix Fietkau <nbd@nbd.name>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

mt76x02u: check chip version on probe

Since some USB device IDs are duplicated between mt76x0u, mt7601u
and mt76x2u device, check chip version on probe and return error if
not match the driver.

Don't think this is serious issue, probe most likely will fail at
some other point for wrong device, but we do not have to configure
it if we know is not our device.

Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

mt7601u: check chip version on probe

Since some USB device IDs are duplicated between mt7601u and mt76x0u
devices, check chip version on probe and return error if not match
0x7601.

Don't think this is serious issue, probe most likely will fail at
some other point for wrong device, but we do not have to configure
it if we know is not mt7601u device.

Reported-by: Xose Vazquez Perez <xose.vazquez@gmail.com>
Signed-off-by: Stanislaw Gruszka <sgruszka@redhat.com>
Acked-by: Jakub Kicinski <kubakici@wp.pl>
Signed-off-by: Kalle Valo <kvalo@codeaurora.org>

Merge remote-tracking branch 'net/master'

netfilter: nf_flowtable: remove duplicated transition in diagram

No direct transition from prerouting to forward hook, routing lookup
needs to happen first.

Fixes: 19b351f16fd9 ("netfilter: add flowtable documentation")
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

Documentation: networking: Update netdev-FAQ regarding patches

Provide an explanation of what is expected with respect to sending new
versions of specific patches within a patch series, as well as what
happens if an earlier patch series accidentally gets merged).

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 's390-qeth-fixes'

Julian Wiedmann says:

====================
s390/qeth: fixes 2019-03-18

please apply the following three patches to -net. The first two are fixes
for minor race conditions in the probe code, while the third one gets
dropwatch working (again).
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: be drop monitor friendly

As part of the TX completion path, qeth_release_skbs() frees the completed
skbs with __skb_queue_purge(). This ends in kfree_skb(), reporting every
completed skb as dropped.
On the other hand when dropping an skb in .ndo_start_xmit, we end up
calling consume_skb()... where we should be using kfree_skb() so that
drop monitors get notified.

Switch the drop/consume logic around, and also don't accumulate dropped
packets in the tx_errors statistics.

Fixes: dc149e3764d8 ("s390/qeth: replace open-coded skb_queue_walk()")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: fix race when initializing the IP address table

The ucast IP table is utilized by some of the L3-specific sysfs attributes
that qeth_l3_create_device_attributes() provides. So initialize the table
_before_ registering the attributes.

Fixes: ebccc7397e4a ("s390/qeth: add missing hash table initializations")
Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

s390/qeth: don't erase configuration while probing

The HW trap and VNICC configuration is exposed via sysfs, and may have
already been modified when qeth_l?_probe_device() attempts to initialize
them. So (1) initialize the VNICC values a little earlier, and (2) don't
bother about the HW trap mode, it was already initialized before.

Signed-off-by: Julian Wiedmann <jwi@linux.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mISDN: hfcpci: Test both vendor & device ID for Digium HFC4S

The device ID alone does not uniquely identify a device. Test both the
vendor and device ID to make sure we don't mistakenly think some other
vendor's 0xB410 device is a Digium HFC4S. Also, instead of the bare hex
ID, use the same constant (PCI_DEVICE_ID_DIGIUM_HFC4S) used in the device
ID table.

No functional change intended.

Signed-off-by: Bjorn Helgaas <bhelgaas@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'sctp-fix-ignoring-asoc_id-for-tcp-style-sockets-on-some-setsockopts'

Xin Long says:

====================
sctp: fix ignoring asoc_id for tcp-style sockets on some setsockopts

This is a patchset to fix ignoring asoc_id for tcp-style sockets on
some setsockopts, introduced by SCTP_CURRENT_ASSOC of the patchset:

  [net-next,00/24] sctp: support SCTP_FUTURE/CURRENT/ALL_ASSOC
  (https://patchwork.ozlabs.org/cover/1031706/)

As Marcelo suggested, we fix it on each setsockopt that is using
SCTP_CURRENT_ASSOC one by one by adding the check:

    if (sctp_style(sk, TCP))
         xxx.xxx_assoc_id = SCTP_FUTURE_ASSOC;

so that assoc_id will be completely ingored for tcp-style socket on
setsockopts, and works as SCTP_FUTURE_ASSOC.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_STREAM_SCHEDULER sockopt

A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_STREAM_SCHEDULER sockopt.

Fixes: 7efba10d6bd2 ("sctp: add SCTP_FUTURE_ASOC and SCTP_CURRENT_ASSOC for SCTP_STREAM_SCHEDULER sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_EVENT sockopt

A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_EVENT sockopt.

Fixes: d251f05e3ba2 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_EVENT sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_ENABLE_STREAM_RESET sockopt

A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_ENABLE_STREAM_RESET sockopt.

Fixes: 99a62135e127 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_ENABLE_STREAM_RESET sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_PRINFO sockopt

A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_DEFAULT_PRINFO sockopt.

Fixes: 3a583059d187 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_DEFAULT_PRINFO sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_AUTH_DEACTIVATE_KEY sockopt

A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_DEACTIVATE_KEY sockopt.

Fixes: 2af66ff3edc7 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_AUTH_DEACTIVATE_KEY sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_AUTH_DELETE_KEY sockopt

A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_DELETE_KEY sockopt.

Fixes: 3adcc300603e ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_AUTH_DELETE_KEY sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_AUTH_ACTIVE_KEY sockopt

A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_ACTIVE_KEY sockopt.

Fixes: bf9fb6ad4f29 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_AUTH_ACTIVE_KEY sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_AUTH_KEY sockopt

A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_AUTH_KEY sockopt.

Fixes: 7fb3be13a236 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_AUTH_KEY sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_MAX_BURST sockopt

A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_MAX_BURST sockopt.

Fixes: e0651a0dc877 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_MAX_BURST sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_CONTEXT sockopt

A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_CONTEXT sockopt.

Fixes: 49b037acca8c ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_CONTEXT sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SNDINFO sockopt

A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_DEFAULT_SNDINFO sockopt.

Fixes: 92fc3bd928c9 ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_DEFAULT_SNDINFO sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DELAYED_SACK sockopt

A similar fix as Patch "sctp: fix ignoring asoc_id for tcp-style sockets on
SCTP_DEFAULT_SEND_PARAM sockopt" on SCTP_DELAYED_SACK sockopt.

Fixes: 9c5829e1c49e ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_DELAYED_SACK sockopt")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: fix ignoring asoc_id for tcp-style sockets on SCTP_DEFAULT_SEND_PARAM sockopt

Currently if the user pass an invalid asoc_id to SCTP_DEFAULT_SEND_PARAM
on a TCP-style socket, it will silently ignore the new parameters.
That's because after not finding an asoc, it is checking asoc_id against
the known values of CURRENT/FUTURE/ALL values and that fails to match.

IOW, if the user supplies an invalid asoc id or not, it should either
match the current asoc or the socket itself so that it will inherit
these later. Fixes it by forcing asoc_id to SCTP_FUTURE_ASSOC in case it
is a TCP-style socket without an asoc, so that the values get set on the
socket.

Fixes: 707e45b3dc5a ("sctp: use SCTP_FUTURE_ASSOC and add SCTP_CURRENT_ASSOC for SCTP_DEFAULT_SEND_PARAM sockopt")
Signed-off-by: Marcelo Ricardo Leitner <marcelo.leitner@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: not copy sctp_sock pd_lobby in sctp_copy_descendant

Now sctp_copy_descendant() copies pd_lobby from old sctp scok to new
sctp sock. If sctp_sock_migrate() returns error, it will panic when
releasing new sock and trying to purge pd_lobby due to the incorrect
pointers in pd_lobby.

  [  120.485116] kasan: CONFIG_KASAN_INLINE enabled
  [  120.486270] kasan: GPF could be caused by NULL-ptr deref or user
  [  120.509901] Call Trace:
  [  120.510443]  sctp_ulpevent_free+0x1e8/0x490 [sctp]
  [  120.511438]  sctp_queue_purge_ulpevents+0x97/0xe0 [sctp]
  [  120.512535]  sctp_close+0x13a/0x700 [sctp]
  [  120.517483]  inet_release+0xdc/0x1c0
  [  120.518215]  __sock_release+0x1d2/0x2a0
  [  120.519025]  sctp_do_peeloff+0x30f/0x3c0 [sctp]

We fix it by not copying sctp_sock pd_lobby in sctp_copy_descendan(),
and skb_queue_head_init() can also be removed in sctp_sock_migrate().

Reported-by: syzbot+85e0b422ff140b03672a@syzkaller.appspotmail.com
Fixes: 89664c623617 ("sctp: sctp_sock_migrate() returns error if sctp_bind_addr_dup() fails")
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: get sctphdr by offset in sctp_compute_cksum

sctp_hdr(skb) only works when skb->transport_header is set properly.

But in Netfilter, skb->transport_header for ipv6 is not guaranteed
to be right value for sctphdr. It would cause to fail to check the
checksum for sctp packets.

So fix it by using offset, which is always right in all places.

v1->v2:
- Fix the changelog.

Fixes: e6d8b64b34aa ("net: sctp: fix and consolidate SCTP checksumming code")
Reported-by: Li Shuang <shuali@redhat.com>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_packet: fix the tx skb protocol in raw sockets with ETH_P_ALL

I am using "protocol ip" filters in TC to manipulate TC flower
classifiers, which are only available with "protocol ip". However,
I faced an issue that packets sent via raw sockets with ETH_P_ALL
did not match the ip filters even if they did satisfy the condition
(e.g., DHCP offer from dhcpd).

I have determined that the behavior was caused by an unexpected
value stored in skb->protocol, namely, ETH_P_ALL instead of ETH_P_IP,
when packets were sent via raw sockets with ETH_P_ALL set.

IMHO, storing ETH_P_ALL in skb->protocol is not appropriate for
packets sent via raw sockets because ETH_P_ALL is not a real ether
type used on wire, but a virtual one.

This patch fixes the tx protocol selection in cases of transmission
via raw sockets created with ETH_P_ALL so that it asks the driver to
extract protocol from the Ethernet header.

Fixes: 75c65772c3 ("net/packet: Ask driver for protocol if not provided by user")
Signed-off-by: Yoshiki Komachi <komachi.yoshiki@lab.ntt.co.jp>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

packets: Always register packet sk in the same order

When using fanouts with AF_PACKET, the demux functions such as
fanout_demux_cpu will return an index in the fanout socket array, which
corresponds to the selected socket.

The ordering of this array depends on the order the sockets were added
to a given fanout group, so for FANOUT_CPU this means sockets are bound
to cpus in the order they are configured, which is OK.

However, when stopping then restarting the interface these sockets are
bound to, the sockets are reassigned to the fanout group in the reverse
order, due to the fact that they were inserted at the head of the
interface's AF_PACKET socket list.

This means that traffic that was directed to the first socket in the
fanout group is now directed to the last one after an interface restart.

In the case of FANOUT_CPU, traffic from CPU0 will be directed to the
socket that used to receive traffic from the last CPU after an interface
restart.

This commit introduces a helper to add a socket at the tail of a list,
then uses it to register AF_PACKET sockets.

Note that this changes the order in which sockets are listed in /proc and
with sock_diag.

Fixes: dc99f600698d ("packet: Add fanout support")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

vxlan: Don't call gro_cells_destroy() before device is unregistered

Commit ad6c9986bcb62 ("vxlan: Fix GRO cells race condition between
receive and link delete") fixed a race condition for the typical case a vxlan
device is dismantled from the current netns. But if a netns is dismantled,
vxlan_destroy_tunnels() is called to schedule a unregister_netdevice_queue()
of all the vxlan tunnels that are related to this netns.

In vxlan_destroy_tunnels(), gro_cells_destroy() is called and finished before
unregister_netdevice_queue(). This means that the gro_cells_destroy() call is
done too soon, for the same reasons explained in above commit.

So we need to fully respect the RCU rules, and thus must remove the
gro_cells_destroy() call or risk use after-free.

Fixes: 58ce31cca1ff ("vxlan: GRO support at tunnel layer")
Signed-off-by: Suanming.Mou <mousuanming@huawei.com>
Suggested-by: Eric Dumazet <eric.dumazet@gmail.com>
Reviewed-by: Stefano Brivio <sbrivio@redhat.com>
Reviewed-by: Zhiqiang Liu <liuzhiqiang26@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: aquantia: fix rx checksum offload for UDP/TCP over IPv6

TCP/UDP checksum validity was propagated to skb
only if IP checksum is valid.
But for IPv6 there is no validity as there is no checksum in IPv6.
This patch propagates TCP/UDP checksum validity regardless of IP checksum.

Fixes: 018423e90bee ("net: ethernet: aquantia: Add ring support code")
Signed-off-by: Igor Russkikh <igor.russkikh@aquantia.com>
Signed-off-by: Nikita Danilov <nikita.danilov@aquantia.com>
Signed-off-by: Dmitry Bogdanov <dmitry.bogdanov@aquantia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

mac8390: Fix mmio access size probe

The bug that Stan reported is as follows. After a restart, a 16-bit NIC
may be incorrectly identified as a 32-bit NIC and stop working.

mac8390 slot.E: Memory length resource not found, probing
mac8390 slot.E: Farallon EtherMac II-C (type farallon)
mac8390 slot.E: MAC 00:00:c5:30:c2:99, IRQ 61, 32 KB shared memory at 0xfeed0000, 32-bit access.

The bug never arises after a cold start and only intermittently after a
warm start. (I didn't investigate why the bug is intermittent.)

It turns out that memcpy_toio() is deprecated and memcmp_withio() also
has issues. Replacing these calls with mmio accessors fixes the problem.

Reported-and-tested-by: Stan Johnson <userm57@yahoo.com>
Fixes: 2964db0f5904 ("m68k: Mac DP8390 update")
Signed-off-by: Finn Thain <fthain@telegraphics.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

gtp: change NET_UDP_TUNNEL dependency to select

Similarly to commit a7603ac1fc8c ("geneve: change NET_UDP_TUNNEL
dependency to select"), GTP has a dependency on NET_UDP_TUNNEL which
makes impossible to compile it if no other protocol depending on
NET_UDP_TUNNEL is selected.

Fix this by changing the depends to a select, and drop NET_IP_TUNNEL from
the select list, as it already depends on NET_UDP_TUNNEL.

Signed-off-by: Matteo Croce <mcroce@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: rose: fix a possible stack overflow

rose_write_internal() uses a temp buffer of 100 bytes, but a manual
inspection showed that given arbitrary input, rose_create_facilities()
can fill up to 110 bytes.

Lets use a tailroom of 256 bytes for peace of mind, and remove
the bounce buffer : we can simply allocate a big enough skb
and adjust its length as needed.

syzbot report :

BUG: KASAN: stack-out-of-bounds in memcpy include/linux/string.h:352 [inline]
BUG: KASAN: stack-out-of-bounds in rose_create_facilities net/rose/rose_subr.c:521 [inline]
BUG: KASAN: stack-out-of-bounds in rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116
Write of size 7 at addr ffff88808b1ffbef by task syz-executor.0/24854

CPU: 0 PID: 24854 Comm: syz-executor.0 Not tainted 5.0.0+ #97
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:77 [inline]
dump_stack+0x172/0x1f0 lib/dump_stack.c:113
print_address_description.cold+0x7c/0x20d mm/kasan/report.c:187
kasan_report.cold+0x1b/0x40 mm/kasan/report.c:317
check_memory_region_inline mm/kasan/generic.c:185 [inline]
check_memory_region+0x123/0x190 mm/kasan/generic.c:191
memcpy+0x38/0x50 mm/kasan/common.c:131
memcpy include/linux/string.h:352 [inline]
rose_create_facilities net/rose/rose_subr.c:521 [inline]
rose_write_internal+0x597/0x15d0 net/rose/rose_subr.c:116
rose_connect+0x7cb/0x1510 net/rose/af_rose.c:826
__sys_connect+0x266/0x330 net/socket.c:1685
__do_sys_connect net/socket.c:1696 [inline]
__se_sys_connect net/socket.c:1693 [inline]
__x64_sys_connect+0x73/0xb0 net/socket.c:1693
do_syscall_64+0x103/0x610 arch/x86/entry/common.c:290
entry_SYSCALL_64_after_hwframe+0x49/0xbe
RIP: 0033:0x458079
Code: ad b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00 00 66 90 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 0f 83 7b b8 fb ff c3 66 2e 0f 1f 84 00 00 00 00
RSP: 002b:00007f47b8d9dc78 EFLAGS: 00000246 ORIG_RAX: 000000000000002a
RAX: ffffffffffffffda RBX: 0000000000000003 RCX: 0000000000458079
RDX: 000000000000001c RSI: 0000000020000040 RDI: 0000000000000004
RBP: 000000000073bf00 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00007f47b8d9e6d4
R13: 00000000004be4a4 R14: 00000000004ceca8 R15: 00000000ffffffff

The buggy address belongs to the page:
page:ffffea00022c7fc0 count:0 mapcount:0 mapping:0000000000000000 index:0x0
flags: 0x1fffc0000000000()
raw: 01fffc0000000000 0000000000000000 ffffffff022c0101 0000000000000000
raw: 0000000000000000 0000000000000000 00000000ffffffff 0000000000000000
page dumped because: kasan: bad access detected

Memory state around the buggy address:
ffff88808b1ffa80: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
ffff88808b1ffb00: 00 00 00 00 00 00 00 00 f1 f1 f1 f1 00 00 00 03
>ffff88808b1ffb80: f2 f2 00 00 00 00 00 00 00 00 00 00 00 00 04 f3
^
ffff88808b1ffc00: f3 f3 f3 f3 00 00 00 00 00 00 00 00 00 00 00 00
ffff88808b1ffc80: 00 00 00 00 00 00 00 f1 f1 f1 f1 f1 f1 01 f2 01

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

doc: fix link to MSG_ZEROCOPY patchset

Use https and link to the patch directly.

Signed-off-by: Tobias Klauser <tklauser@distanz.ch>
Acked-by: Willem de Bruijn <willemb@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netfilter: nft_redir: fix module autoload with ip4

AF_INET4 does not exist.

Fixes: c78efc99c750 ("netfilter: nf_tables: nat: merge nft_redir protocol specific modules)"
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_tables: bogus EBUSY in helper removal from transaction

Proper use counter updates when activating and deactivating the object,
otherwise, this hits bogus EBUSY error.

Fixes: cd5125d8f518 ("netfilter: nf_tables: split set destruction in deactivate and destroy phase")
Reported-by: Laura Garcia <nevola@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: ip6t_srh: fix NULL pointer dereferences

skb_header_pointer may return NULL. The current code dereference
its return values without a NULL check.

The fix inserts the checks to avoid NULL pointer dereferences.

Fixes: 202a8ff545cc ("netfilter: add IPv6 segment routing header 'srh' match")
Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: fix NETFILTER_XT_TARGET_TEE dependencies

With NETFILTER_XT_TARGET_TEE=y and IP6_NF_IPTABLES=m, we get a link
error when referencing the NF_DUP_IPV6 module:

net/netfilter/xt_TEE.o: In function `tee_tg6':
xt_TEE.c:(.text+0x14): undefined reference to `nf_dup_ipv6'

The problem here is the 'select NF_DUP_IPV6 if IP6_NF_IPTABLES'
that forces NF_DUP_IPV6 to be =m as well rather than setting it
to =y as was intended here. Adding a soft dependency on
IP6_NF_IPTABLES avoids that broken configuration.

Fixes: 5d400a4933e8 ("netfilter: Kconfig: Change select IPv6 dependencies")
Cc: Máté Eckl <ecklm94@gmail.com>
Cc: Taehee Yoo <ap420073@gmail.com>
Link: https://patchwork.ozlabs.org/patch/999498/
Link: https://lore.kernel.org/patchwork/patch/960062/
Reported-by: Randy Dunlap <rdunlap@infradead.org>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: bridge: set skb transport_header before entering NF_INET_PRE_ROUTING

Since Commit 21d1196a35f5 ("ipv4: set transport header earlier"),
skb->transport_header has been always set before entering INET
netfilter. This patch is to set skb->transport_header for bridge
before entering INET netfilter by bridge-nf-call-iptables.

It also fixes an issue that sctp_error() couldn't compute a right
csum due to unset skb->transport_header.

Fixes: e6d8b64b34aa ("net: sctp: fix and consolidate SCTP checksumming code")
Reported-by: Li Shuang <shuali@redhat.com>
Suggested-by: Pablo Neira Ayuso <pablo@netfilter.org>
Signed-off-by: Xin Long <lucien.xin@gmail.com>
Acked-by: Neil Horman <nhorman@tuxdriver.com>
Acked-by: Florian Westphal <fw@strlen.de>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nft_set_rbtree: check for inactive element after flag mismatch

Otherwise, we hit bogus ENOENT when removing elements.

Fixes: e701001e7cbe ("netfilter: nft_rbtree: allow adjacent intervals with dynamic updates")
Reported-by: Václav Zindulka <vaclav.zindulka@tlapnet.cz>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

netfilter: nf_conntrack_sip: remove direct dependency on IPv6

Previous implementation was not usable with CONFIG_IPV6=m.

Fixes: a3419ce3356c ("netfilter: nf_conntrack_sip: add sip_external_media logic")
Signed-off-by: Alin Nastac <alin.nastac@gmail.com>
Signed-off-by: Pablo Neira Ayuso <pablo@netfilter.org>

tipc: allow service ranges to be connect()'ed on RDM/DGRAM

We move the check that prevents connecting service ranges to after
the RDM/DGRAM check, and move address sanity control to a separate
function that also validates the service range.

Fixes: 23998835be98 ("tipc: improve address sanity check in tipc_connect()")
Signed-off-by: Erik Hugne <erik.hugne@gmail.com>
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

networking: fix snmp_counter.rst Doc. Warnings

Fix documentation markup warnings in snmp_counter.rst:

Documentation/networking/snmp_counter.rst:416: WARNING: Title underline too short.
Documentation/networking/snmp_counter.rst:684: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:693: WARNING: Title underline too short.
Documentation/networking/snmp_counter.rst:707: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:712: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:722: WARNING: Title underline too short.
Documentation/networking/snmp_counter.rst:733: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:736: WARNING: Bullet list ends without a blank line; unexpected unindent.
Documentation/networking/snmp_counter.rst:739: WARNING: Bullet list ends without a blank line; unexpected unindent.

Fixes: 80cc49507ba48 ("net: Add part of TCP counts explanations in snmp_counters.rst")
Fixes: 8e2ea53a83dfb ("add snmp counters document")
Fixes: a6c7c7aac2de6 ("net: add document for several snmp counters")
Signed-off-by: Randy Dunlap <rdunlap@infradead.org>
Cc: yupeng <yupeng0921@gmail.com>

net: tipc: fix a missing check for nla_nest_start

nla_nest_start may fail. The fix check its status and returns
-EMSGSIZE in case it fails.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

tun: add a missing rcu_read_unlock() in error path

In my latest patch I missed one rcu_read_unlock(), in case
device is down.

Fixes: 4477138fa0ae ("tun: properly test for IFF_UP")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge git://git./pub/scm/linux/kernel/git/bpf/bpf

Daniel Borkmann says:

====================
pull-request: bpf 2019-03-16

The following pull-request contains BPF updates for your *net* tree.

The main changes are:

1) Fix a umem memory leak on cleanup in AF_XDP, from Björn.

2) Fix BTF to properly resolve forward-declared enums into their corresponding
   full enum definition types during deduplication, from Andrii.

3) Fix libbpf to reject invalid flags in xsk_socket__create(), from Magnus.

4) Fix accessing invalid pointer returned from bpf_tcp_sock() and
   bpf_sk_fullsock() after bpf_sk_release() was called, from Martin.

5) Fix generation of load/store DW instructions in PPC JIT, from Naveen.

6) Various fixes in BPF helper function documentation in bpf.h UAPI header
   used to bpf-helpers(7) man page, from Quentin.

7) Fix segfault in BPF test_progs when prog loading failed, from Yonghong.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: tipc: fix a missing check of nla_nest_start

nla_nest_start could fail and requires a check. The fix returns
-EMSGSIZE if it fails.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: ncsi: fix a missing check for nla_nest_start

nla_nest_start may fail and thus deserves a check.

The fix returns -EMSGSIZE in case it fails.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: openvswitch: fix missing checks for nla_nest_start

nla_nest_start may fail and thus deserves a check.
The fix returns -EMSGSIZE when it fails.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: openvswitch: fix a NULL pointer dereference

upcall is dereferenced even when genlmsg_put fails. The fix
goto out to avoid the NULL pointer dereference in this case.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

powerpc: bpf: Fix generation of load/store DW instructions

Yauheni Kaliuta pointed out that PTR_TO_STACK store/load verifier test
was failing on powerpc64 BE, and rightfully indicated that the PPC_LD()
macro is not masking away the last two bits of the offset per the ISA,
resulting in the generation of 'lwa' instruction instead of the intended
'ld' instruction.

Segher also pointed out that we can't simply mask away the last two bits
as that will result in loading/storing from/to a memory location that
was not intended.

This patch addresses this by using ldx/stdx if the offset is not
word-aligned. We load the offset into a temporary register (TMP_REG_2)
and use that as the index register in a subsequent ldx/stdx. We fix
PPC_LD() macro to mask off the last two bits, but enhance PPC_BPF_LL()
and PPC_BPF_STL() to factor in the offset value and generate the proper
instruction sequence. We also convert all existing users of PPC_LD() and
PPC_STD() to use these macros. All existing uses of these macros have
been audited to ensure that TMP_REG_2 can be clobbered.

Fixes: 156d0e290e96 ("powerpc/ebpf/jit: Implement JIT compiler for extended BPF")
Cc: stable@vger.kernel.org # v4.9+
Reported-by: Yauheni Kaliuta <yauheni.kaliuta@redhat.com>
Signed-off-by: Naveen N. Rao <naveen.n.rao@linux.vnet.ibm.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

xsk: fix umem memory leak on cleanup

When the umem is cleaned up, the task that created it might already be
gone. If the task was gone, the xdp_umem_release function did not free
the pages member of struct xdp_umem.

It turned out that the task lookup was not needed at all; The code was
a left-over when we moved from task accounting to user accounting [1].

This patch fixes the memory leak by removing the task lookup logic
completely.

[1] https://lore.kernel.org/netdev/20180131135356.19134-3-bjorn.topel@gmail.com/

Link: https://lore.kernel.org/netdev/c1cb2ca8-6a14-3980-8672-f3de0bb38dfd@suse.cz/
Fixes: c0c77d8fb787 ("xsk: add user memory registration support sockopt")
Reported-by: Jiri Slaby <jslaby@suse.cz>
Signed-off-by: Björn Töpel <bjorn.topel@intel.com>
Signed-off-by: Daniel Borkmann <daniel@iogearbox.net>

tun: properly test for IFF_UP

Same reasons than the ones explained in commit 4179cb5a4c92
("vxlan: test dev->flags & IFF_UP before calling netif_rx()")

netif_rx_ni() or napi_gro_frags() must be called under a strict contract.

At device dismantle phase, core networking clears IFF_UP
and flush_all_backlogs() is called after rcu grace period
to make sure no incoming packet might be in a cpu backlog
and still referencing the device.

A similar protocol is used for gro layer.

Most drivers call netif_rx() from their interrupt handler,
and since the interrupts are disabled at device dismantle,
netif_rx() does not have to check dev->flags & IFF_UP

Virtual drivers do not have this guarantee, and must
therefore make the check themselves.

Fixes: 1bd4978a88ac ("tun: honor IFF_UP in tun_get_user()")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: meson-gxl: fix interrupt support

If an interrupt is already pending when the interrupt is enabled on the
GXL phy, no IRQ will ever be triggered.

The fix is simply to make sure pending IRQs are cleared before setting
up the irq mask.

Fixes: cf127ff20af1 ("net: phy: meson-gxl: add interrupt support")
Signed-off-by: Jerome Brunet <jbrunet@baylibre.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: add documentation to socket.c

Adds missing sphinx documentation to the
socket.c's functions. Also fixes some whitespaces.

I also changed the style of older documentation as an
effort to have an uniform documentation style.

Signed-off-by: Pedro Tammela <pctammela@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: strparser: fix a missing check for create_singlethread_workqueue

In case create_singlethread_workqueue fails, the check returns
an error to callers to avoid potential NULL pointer dereferences.

Signed-off-by: Kangjie Lu <kjlu@umn.edu>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: sis900: fix indentation issues, remove some spaces

There are several statements that contain extra spacing in
the indentation; clean this up by removing spaces. Also
add { } braces on if statement to keep to kernel coding
style.

Signed-off-by: Colin Ian King <colin.king@canonical.com>
Signed-off-by: David S. Miller <davem@davemloft.net>