openwrt/staging/blogic.git
15 years agonet/appletalk: push down BKL into a atalk_dgram_ops
Arnd Bergmann [Thu, 5 Nov 2009 04:37:26 +0000 (04:37 +0000)]
net/appletalk: push down BKL into a atalk_dgram_ops

Making the BKL usage explicit in appletalk makes it more
obvious where it is used, reduces code size and helps
getting rid of the BKL in common code.

I did not analyse how to kill lock_kernel from appletalk
entirely, this will involve either proving that it's not
needed, or replacing with a proper mutex or spinlock,
after finding out which data structures are protected
by the lock.

Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: David S. Miller <davem@davemloft.net>
Cc: Stephen Hemminger <shemminger@vyatta.com>
Cc: netdev@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoatl1c: change atl1c_buffer struct and restructure clean atl1c_buffer procedure
Jie Yang [Fri, 6 Nov 2009 08:32:05 +0000 (00:32 -0800)]
atl1c: change atl1c_buffer struct and restructure clean atl1c_buffer procedure

change atl1c_buffer struct, use "u16 flags" instead of "u16 state"
to store more infomation for atl1c_buffer, and restructure clean
atl1c_buffer procedure, add common api atl1c_clean_buffer.

Signed-off-by: Jie Yang <jie.yang@atheros.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: Replace old style lock initializer
Thomas Gleixner [Sat, 7 Nov 2009 06:17:25 +0000 (22:17 -0800)]
net: Replace old style lock initializer

SPIN_LOCK_UNLOCKED is deprecated. Use DEFINE_SPINLOCK instead.

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: compat: No need to define IFHWADDRLEN and IFNAMSIZ twice.
David S. Miller [Sat, 7 Nov 2009 04:46:52 +0000 (20:46 -0800)]
net: compat: No need to define IFHWADDRLEN and IFNAMSIZ twice.

It's defined colloqually in linux/if.h and linux/compat.h
includes that.

Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet, compat_ioctl: handle more ioctls correctly
Arnd Bergmann [Fri, 6 Nov 2009 08:09:09 +0000 (08:09 +0000)]
net, compat_ioctl: handle more ioctls correctly

The MII ioctls and SIOCSIFNAME need to go through ifsioc conversion,
which they never did so far. Some others are not implemented in the
native path, so we can just return -EINVAL directly.

Add IFSLAVE ioctls to the EINVAL list and move it to the end to
optimize the code path for the common case.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agocompat: move sockios handling to net/socket.c
Arnd Bergmann [Sat, 7 Nov 2009 07:10:54 +0000 (23:10 -0800)]
compat: move sockios handling to net/socket.c

This removes the original socket compat_ioctl code
from fs/compat_ioctl.c and converts the code from the copy
in net/socket.c into a single function. We add a few cycles
of runtime to compat_sock_ioctl() with the long switch()
statement, but gain some cycles in return by simplifying
the call chain to get there.

Due to better inlining, save 1.5kb of object size in the
process, and enable further savings:

before:
   text    data     bss     dec     hex filename
  13540   18008    2080   33628    835c obj/fs/compat_ioctl.o
  14565     636      40   15241    3b89 obj/net/socket.o

after:
   text    data     bss     dec     hex filename
   8916   15176    2080   26172    663c obj/fs/compat_ioctl.o
  20725     636      40   21401    5399 obj/net/socket.o

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoappletalk: handle SIOCATALKDIFADDR compat ioctl
Arnd Bergmann [Fri, 6 Nov 2009 08:09:06 +0000 (08:09 +0000)]
appletalk: handle SIOCATALKDIFADDR compat ioctl

We must not have a compat ioctl handler for SIOCATALKDIFADDR
in common code, because the same number is used in other protocols
with different data structures.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: copy socket ioctl code to net/socket.h
Arnd Bergmann [Sat, 7 Nov 2009 07:00:29 +0000 (23:00 -0800)]
net: copy socket ioctl code to net/socket.h

This makes an identical copy of the socket compat_ioctl code
from fs/compat_ioctl.c to net/socket.c, as a preparation
for moving the functionality in a way that can be easily
reviewed.

The code is hidden inside of #if 0 and gets activated in the
patch that will make it work.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet, compat_ioctl: handle socket ioctl abuses in tty drivers
Arnd Bergmann [Sat, 7 Nov 2009 06:51:16 +0000 (22:51 -0800)]
net, compat_ioctl: handle socket ioctl abuses in tty drivers

Slip and a few other drivers use the same ioctl numbers on
tty devices that are normally meant for sockets. This causes
problems with our compat_ioctl handling that tries to convert
the data structures in a different format.

Fortunately, these five drivers all use 32 bit compatible
data structures in the ioctl numbers, so we can just add
a trivial compat_ioctl conversion function to each of them.

SIOCSIFENCAP and SIOCGIFENCAP do not need to live in
fs/compat_ioctl.c after this any more, and they are not
used on any sockets.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet/tun: handle compat_ioctl directly
Arnd Bergmann [Sat, 7 Nov 2009 06:52:32 +0000 (22:52 -0800)]
net/tun: handle compat_ioctl directly

The tun driver is the only code in the kernel that operates
on a character device with struct ifreq. Change the driver
to handle the conversion itself so we can contain the
remaining ifreq handling in the socket layer.

This also fixes a bug in the handling of invalid ioctl
numbers on an unbound tun device. The driver treats this
as a TUNSETIFF in native mode, but there is no way for
the generic compat_ioctl() function to emulate this
behaviour. Possibly the driver was only doing this
accidentally anyway, but if any code relies on this
misfeature, it now also works in compat mode.

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agocompat: add struct compat_ifreq etc to compat.h
Arnd Bergmann [Fri, 6 Nov 2009 08:09:03 +0000 (08:09 +0000)]
compat: add struct compat_ifreq etc to compat.h

In order to move socket ioctl conversion code into multiple
places in the socket code, we need a common defintion of
the data structures it uses.

Also change the name from ifreq32 to compat_ifreq to
follow the naming convention for compat.h

Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoMerge branch 'for-next' of git://git.kernel.org/pub/scm/linux/kernel/git/lowpan/lowpan
David S. Miller [Sat, 7 Nov 2009 01:57:51 +0000 (17:57 -0800)]
Merge branch 'for-next' of git://git./linux/kernel/git/lowpan/lowpan

15 years agoMerge branch 'linux-2.6.33.y' of git://git.kernel.org/pub/scm/linux/kernel/git/inaky...
David S. Miller [Fri, 6 Nov 2009 13:01:54 +0000 (05:01 -0800)]
Merge branch 'linux-2.6.33.y' of git://git./linux/kernel/git/inaky/wimax

15 years agoieee802154: add support for creation/removal of logic interfaces
Dmitry Eremin-Solenikov [Thu, 5 Nov 2009 13:56:23 +0000 (16:56 +0300)]
ieee802154: add support for creation/removal of logic interfaces

Add support for two more NL802154 commands: ADD_IFACE and DEL_IFACE,
thus allowing creation and removal of logic WPAN interfaces on the top
of wpan-phy.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agoieee802154: add PHY_NAME to LIST_IFACE command results
Dmitry Eremin-Solenikov [Thu, 29 Oct 2009 13:28:52 +0000 (16:28 +0300)]
ieee802154: add PHY_NAME to LIST_IFACE command results

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agoieee802154: add two nl802154 helpers
Dmitry Eremin-Solenikov [Wed, 4 Nov 2009 15:05:38 +0000 (18:05 +0300)]
ieee802154: add two nl802154 helpers

Add two nl802154 helpers: one for starting a reply message, one for sending.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agofakehard: mlme_ops->get_phy implementation
Dmitry Eremin-Solenikov [Wed, 4 Nov 2009 14:53:40 +0000 (17:53 +0300)]
fakehard: mlme_ops->get_phy implementation

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agoieee802154: add an mlme_ops call to retrieve PHY object
Dmitry Eremin-Solenikov [Wed, 4 Nov 2009 14:53:23 +0000 (17:53 +0300)]
ieee802154: add an mlme_ops call to retrieve PHY object

ops->get_phy should increment reference to wpan-phy. As we return
the external structure, we should do refcounting correctly.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agofakehard: claim all 2.4 Ghz channels as supported
Dmitry Eremin-Solenikov [Tue, 22 Sep 2009 11:31:25 +0000 (15:31 +0400)]
fakehard: claim all 2.4 Ghz channels as supported

Make fakehard device claim all 2.4 Ghz channels from 802.15.4-2006,
802.15.4a-2007 as supported by the hw.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agofakehard: no need to export net_to_phy, make it static
Dmitry Eremin-Solenikov [Thu, 29 Oct 2009 13:32:46 +0000 (16:32 +0300)]
fakehard: no need to export net_to_phy, make it static

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agoieee802154: add LIST_PHY command support
Dmitry Eremin-Solenikov [Tue, 15 Sep 2009 13:04:44 +0000 (17:04 +0400)]
ieee802154: add LIST_PHY command support

Add nl802154 command to get information about PHY's present in
the system.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agoieee802154: split away MAC commands implementation
Dmitry Eremin-Solenikov [Mon, 14 Sep 2009 14:17:36 +0000 (18:17 +0400)]
ieee802154: split away MAC commands implementation

Move all mac-related stuff to separate file so that ieee802154/netlink.c
contains only generic code.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agoieee802154: merge nl802154 and wpan-class in single module
Dmitry Eremin-Solenikov [Thu, 10 Sep 2009 13:50:12 +0000 (17:50 +0400)]
ieee802154: merge nl802154 and wpan-class in single module

There is no real need to have ieee802154 interfaces separate
into several small modules, as neither of them has it's own use.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agoieee802154: constify struct net_device in some operations
Dmitry Eremin-Solenikov [Fri, 2 Oct 2009 15:05:00 +0000 (19:05 +0400)]
ieee802154: constify struct net_device in some operations

Some of ieee802154 operations really shouldn't change passed net_device.
Constify passed argument.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agowpan-phy: follow usual patter of devices registration
Dmitry Eremin-Solenikov [Mon, 28 Sep 2009 15:01:20 +0000 (19:01 +0400)]
wpan-phy: follow usual patter of devices registration

Follow the usual pattern of devices registration by adding new function
(wpan_phy_set_dev) that sets child->parent relationship and removing
parent argument from wpan_phy_register call.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agowpan-phy: allow specifying a per-page channel mask
Dmitry Eremin-Solenikov [Tue, 22 Sep 2009 11:26:48 +0000 (15:26 +0400)]
wpan-phy: allow specifying a per-page channel mask

IEEE 802.15.4-2006 defines channel pages that hold channels (max 32 pages,
27 channels per page). Allow the driver to specify supported channels
on pages, other than the first one.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agowpan-phy: use snprintf to limit the amount of chars written
Dmitry Eremin-Solenikov [Mon, 28 Sep 2009 14:58:32 +0000 (18:58 +0400)]
wpan-phy: use snprintf to limit the amount of chars written

Use snprintf to limit the amount of chars put in the buffer for attr -> show.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agowpan-phy: init channel/page fields
Dmitry Eremin-Solenikov [Fri, 18 Sep 2009 12:35:06 +0000 (16:35 +0400)]
wpan-phy: init channel/page fields

Set page to zero (for compatibility w/ devices supporting only first page).
Also init channel by default to -1 to disallow transfers for non-initialised
devices.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agowpan-phy: add wpan-phy iteration functions
Dmitry Eremin-Solenikov [Tue, 15 Sep 2009 12:57:04 +0000 (16:57 +0400)]
wpan-phy: add wpan-phy iteration functions

Add API to iterate over the wpan-phy instances.

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agowpan-phy: add a helper to put the wpan_phy device
Dmitry Eremin-Solenikov [Mon, 14 Sep 2009 14:11:03 +0000 (18:11 +0400)]
wpan-phy: add a helper to put the wpan_phy device

Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
15 years agoMerge branch 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6
David S. Miller [Fri, 6 Nov 2009 08:55:55 +0000 (00:55 -0800)]
Merge branch 'master' of /linux/kernel/git/davem/net-2.6

Conflicts:
drivers/net/usb/cdc_ether.c

All CDC ethernet devices of type USB_CLASS_COMM need to use
'&mbm_info'.

Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agodecnet: netdevice refcount leak
Eric Dumazet [Fri, 6 Nov 2009 08:50:39 +0000 (00:50 -0800)]
decnet: netdevice refcount leak

While working on device refcount stuff, I found a device refcount leak
through DECNET.
This nasty bug can be used to hold refcounts on any !DECNET netdevice.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetfilter: nf_nat: fix NAT issue in 2.6.30.4+
Jozsef Kadlecsik [Fri, 6 Nov 2009 08:43:42 +0000 (00:43 -0800)]
netfilter: nf_nat: fix NAT issue in 2.6.30.4+

Vitezslav Samel discovered that since 2.6.30.4+ active FTP can not work
over NAT. The "cause" of the problem was a fix of unacknowledged data
detection with NAT (commit a3a9f79e361e864f0e9d75ebe2a0cb43d17c4272).
However, actually, that fix uncovered a long standing bug in TCP conntrack:
when NAT was enabled, we simply updated the max of the right edge of
the segments we have seen (td_end), by the offset NAT produced with
changing IP/port in the data. However, we did not update the other parameter
(td_maxend) which is affected by the NAT offset. Thus that could drift
away from the correct value and thus resulted breaking active FTP.

The patch below fixes the issue by *not* updating the conntrack parameters
from NAT, but instead taking into account the NAT offsets in conntrack in a
consistent way. (Updating from NAT would be more harder and expensive because
it'd need to re-calculate parameters we already calculated in conntrack.)

Signed-off-by: Jozsef Kadlecsik <kadlec@blackhole.kfki.hu>
Signed-off-by: Patrick McHardy <kaber@trash.net>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobe2net: Fix CQE_STATUS_EXTD_SHIFT define
Sathya Perla [Fri, 6 Nov 2009 08:31:01 +0000 (00:31 -0800)]
be2net: Fix CQE_STATUS_EXTD_SHIFT define

Signed-off-by: Sathya Perla <sathyap@serverengines.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: Fix build warning in sock_bindtodevice().
David S. Miller [Fri, 6 Nov 2009 06:37:11 +0000 (22:37 -0800)]
net: Fix build warning in sock_bindtodevice().

net/core/sock.c: In function 'sock_setsockopt':
net/core/sock.c:396: warning: 'index' may be used uninitialized in this function
net/core/sock.c:396: note: 'index' was declared here

GCC can't see that all paths initialize index, so just
set it to the default (0) and eliminate the specific
code block that handles the null device name string.

Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agopktgen: tx_bytes might be slightly wrong
Eric Dumazet [Fri, 6 Nov 2009 05:04:32 +0000 (21:04 -0800)]
pktgen: tx_bytes might be slightly wrong

cur_pkt_size can be changed in proc fs while pktgen is running,
we better use a private field to get precise tx-bytes counter.

Signed-off-by: Ben Greear <greearb@candelatech.com>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: sock_bindtodevice() RCU-ification
Eric Dumazet [Fri, 6 Nov 2009 05:03:39 +0000 (21:03 -0800)]
net: sock_bindtodevice() RCU-ification

Avoid dev_hold()/dev_put() in sock_bindtodevice()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoip_frag: dont touch device refcount
Eric Dumazet [Fri, 6 Nov 2009 04:59:47 +0000 (20:59 -0800)]
ip_frag: dont touch device refcount

When sending fragmentation expiration ICMP V4/V6 messages,
we can avoid touching device refcount, thanks to RCU

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet_cls: Use __dev_get_by_index()
Eric Dumazet [Fri, 6 Nov 2009 04:57:26 +0000 (20:57 -0800)]
net_cls: Use __dev_get_by_index()

We hold RTNL in tc_dump_tfilter(), we can avoid dev_hold()/dev_put()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agosctp: ipv6: avoid touching device refcount
Eric Dumazet [Fri, 6 Nov 2009 04:56:46 +0000 (20:56 -0800)]
sctp: ipv6: avoid touching device refcount

Avoid touching device refcount in sctp/ipv6, thanks to RCU

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonetlabel: remove dev_put() calls
Eric Dumazet [Fri, 6 Nov 2009 04:53:47 +0000 (20:53 -0800)]
netlabel: remove dev_put() calls

Use dev_get_by_name_rcu() to avoid dev_put() calls,
in sections already inside a rcu_read_lock()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobridge: remove dev_put() in add_del_if()
Eric Dumazet [Fri, 6 Nov 2009 04:47:35 +0000 (20:47 -0800)]
bridge: remove dev_put() in add_del_if()

add_del_if() is called with RTNL, we can use __dev_get_by_index()
instead of [dev_get_by_index() + dev_put()]

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: check kern before calling security subsystem
Eric Paris [Fri, 6 Nov 2009 04:45:52 +0000 (20:45 -0800)]
net: check kern before calling security subsystem

Before calling capable(CAP_NET_RAW) check if this operations is on behalf
of the kernel or on behalf of userspace.  Do not do the security check if
it is on behalf of the kernel.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: pass kern to net_proto_family create function
Eric Paris [Fri, 6 Nov 2009 06:18:14 +0000 (22:18 -0800)]
net: pass kern to net_proto_family create function

The generic __sock_create function has a kern argument which allows the
security system to make decisions based on if a socket is being created by
the kernel or by userspace.  This patch passes that flag to the
net_proto_family specific create function, so it can do the same thing.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: drop capability from protocol definitions
Eric Paris [Fri, 6 Nov 2009 04:44:37 +0000 (20:44 -0800)]
net: drop capability from protocol definitions

struct can_proto had a capability field which wasn't ever used.  It is
dropped entirely.

struct inet_protosw had a capability field which can be more clearly
expressed in the code by just checking if sock->type = SOCK_RAW.

Signed-off-by: Eric Paris <eparis@redhat.com>
Acked-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agorose: device refcount leak
Eric Dumazet [Fri, 6 Nov 2009 04:56:07 +0000 (20:56 -0800)]
rose: device refcount leak

While hunting dev_put() for net-next-2.6, I found a device refcount
leak in ROSE, ioctl(SIOCADDRT) error path.

Fix is to not touch device refcount, as we hold RTNL

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobridge: prevent bridging wrong device
Stephen Hemminger [Fri, 6 Nov 2009 04:46:52 +0000 (20:46 -0800)]
bridge: prevent bridging wrong device

The bridge code assumes ethernet addressing, so be more strict in
the what is allowed. This showed up when GRE had a bug and was not
using correct address format.

Add some more comments for increased clarity.

Signed-off-by: Stephen Hemminger <shemminger@vyatta.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobnx2x: version 1.52.1-3
Yaniv Rosner [Fri, 6 Nov 2009 04:00:59 +0000 (20:00 -0800)]
bnx2x: version 1.52.1-3

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobnx2x: Fix register access timeout in 10M
Yaniv Rosner [Thu, 5 Nov 2009 17:18:32 +0000 (19:18 +0200)]
bnx2x: Fix register access timeout in 10M

In BCM8481 when link speed goes from 1G to 10M, driver received timeout
since the MAC clock hasn't synced yet with the new speed, so it is required
first to program the MAC with the new speed, and only then configure other
parameters

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobnx2x: Fix 10G mode in BCM8481/BCM84823
Yaniv Rosner [Thu, 5 Nov 2009 17:18:30 +0000 (19:18 +0200)]
bnx2x: Fix 10G mode in BCM8481/BCM84823

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobnx2x: Fix BCM8726 ROM load seq
Yaniv Rosner [Thu, 5 Nov 2009 17:18:26 +0000 (19:18 +0200)]
bnx2x: Fix BCM8726 ROM load seq

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobnx2x: Add support for BCM84823
Yaniv Rosner [Thu, 5 Nov 2009 17:18:23 +0000 (19:18 +0200)]
bnx2x: Add support for BCM84823

Add support for new phy type BCM84823 (Dual copper-port phy)

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobnx2x: Modify BCM8706 link init seq
Yaniv Rosner [Thu, 5 Nov 2009 17:18:21 +0000 (19:18 +0200)]
bnx2x: Modify BCM8706 link init seq

Modify BCM8706 link initialization sequence so that first it link up
between Serdes and BCM8706, and only then between BCM8706 to network

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobnx2x: Enable FC when parallel-detect is used
Yaniv Rosner [Thu, 5 Nov 2009 17:18:12 +0000 (19:18 +0200)]
bnx2x: Enable FC when parallel-detect is used

When parallel detect is used, flow-control is set to the
req_fc_auto_adv instead of none.

Motive: when 577xx is FC configuration is set to AUTO, while LP speed
is set to FORCE mode and FC to force RX/TX, link would come up using
parallel detect, and the FC will be set to NONE since FC capabilities
were not negotiated, although the LP is setting FC to force RX/TX.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobnx2x: Miscellaneous debug print and tabs
Yaniv Rosner [Thu, 5 Nov 2009 17:18:10 +0000 (19:18 +0200)]
bnx2x: Miscellaneous debug print and tabs

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobnx2x: Fix CL73 autoneg issues
Yaniv Rosner [Thu, 5 Nov 2009 17:18:07 +0000 (19:18 +0200)]
bnx2x: Fix CL73 autoneg issues

- Advertise 1G KX4 in CL73 when 1G speed capability is enabled
- Add flow-control negotiation over CL73
- External loopback test on Serdes should be done in FORCE mode, since in
CL73 it is unable to link up with the same core using AUTONEG
- Fix bnx2x_set_led function to support CL73 link leds

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobnx2x: Fix Parallel-Detect settings
Yaniv Rosner [Thu, 5 Nov 2009 17:18:04 +0000 (19:18 +0200)]
bnx2x: Fix Parallel-Detect settings

Enable Parallel-Detect for 10G and 1G only if the relevant speed
capability is enabled

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agovirtio_net: rename driver struct to please modpost
Uwe Kleine-König [Thu, 5 Nov 2009 09:32:44 +0000 (01:32 -0800)]
virtio_net: rename driver struct to please modpost

Commit

3d1285b (move virtnet_remove to .devexit.text)

introduced the first reference to __devexit in struct virtio_driver
virtio_net which upset modpost ("Section mismatch in reference from the
variable virtio_net to the function .devexit.text:virtnet_remove()").

Fix this by renaming virtio_net to virtio_net_driver.

Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Reported-by: Michael S. Tsirkin <mst@redhat.com>
Blame-taken-by: Rusty Russell <rusty@rustcorp.com.au>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agotcp: Use defaults when no route options are available
Gilad Ben-Yossef [Thu, 5 Nov 2009 07:23:10 +0000 (23:23 -0800)]
tcp: Use defaults when no route options are available

Trying to parse the option of a SYN packet that we have
no route entry for should just use global wide defaults
for route entry options.

Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com>
Tested-by: Valdis.Kletnieks@vt.edu
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agotcp: Do not call IPv4 specific func in tcp_check_req
Gilad Ben-Yossef [Thu, 5 Nov 2009 07:21:44 +0000 (23:21 -0800)]
tcp: Do not call IPv4 specific func in tcp_check_req

Calling IPv4 specific inet_csk_route_req in tcp_check_req
is a bad idea and crashes machine on IPv6 connections, as reported
by Valdis Kletnieks

Also, all we are really interested in is the timestamp
option in the header, so calling tcp_parse_options()
with the "estab" set to false flag is an overkill as
it tries to parse half a dozen other TCP options.

We know whether timestamp should be enabled or not
using data from request_sock.

Signed-off-by: Gilad Ben-Yossef <gilad@codefidence.com>
Tested-by: Valdis.Kletnieks@vt.edu
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoTI DaVinci EMAC: Add suspend/resume capability
Ranjith Lohithakshan [Thu, 5 Nov 2009 06:06:20 +0000 (22:06 -0800)]
TI DaVinci EMAC: Add suspend/resume capability

Add suspend/resume capability to TI DaVinci EMAC driver.

Signed-off-by: Ranjith Lohithakshan <ranjithl@ti.com>
Signed-off-by: Chaithrika U S <chaithrika@ti.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: net/ipv4/devinet.c cleanups
Eric Dumazet [Thu, 5 Nov 2009 06:05:10 +0000 (22:05 -0800)]
net: net/ipv4/devinet.c cleanups

As pointed by Stephen Rothwell, commit c6d14c84 added a warning :

net/ipv4/devinet.c: In function 'inet_select_addr':
net/ipv4/devinet.c:902: warning: label 'out' defined but not used

delete unused 'out' label and do some cleanups as well

Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agodecnet: avoid touching device refcount in dn_dev_by_index()
Eric Dumazet [Wed, 4 Nov 2009 18:59:38 +0000 (10:59 -0800)]
decnet: avoid touching device refcount in dn_dev_by_index()

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: cleanup include/linux
Eric Dumazet [Wed, 4 Nov 2009 17:50:58 +0000 (09:50 -0800)]
net: cleanup include/linux

This cleanup patch puts struct/union/enum opening braces,
in first line to ease grep games.

struct something
{

becomes :

struct something {

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoMAINTAINERS: Add git net-next-2.6
Joe Perches [Wed, 4 Nov 2009 17:38:58 +0000 (09:38 -0800)]
MAINTAINERS: Add git net-next-2.6

Add a reference to the the git tree where most
of the forward going network development occurs.

Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoNET: sungem, use spin_trylock_irqsave
Jiri Slaby [Wed, 4 Nov 2009 16:37:31 +0000 (08:37 -0800)]
NET: sungem, use spin_trylock_irqsave

Use spin_trylock_irqsave instead of open-coded
local_irq_save+spin_trylock.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoisdn: hfc_usb: Fix read buffer overflow
Roel Kluin [Wed, 4 Nov 2009 16:31:59 +0000 (08:31 -0800)]
isdn: hfc_usb: Fix read buffer overflow

Check whether index is within bounds before testing the element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoisdn: hisax: Fix test in waitforxfw
Roel Kluin [Wed, 4 Nov 2009 16:31:19 +0000 (08:31 -0800)]
isdn: hisax: Fix test in waitforxfw

The negation makes it a bool before the comparison and hence it
will never be 0x40.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoisdn: eicon: Return on error
Jiri Slaby [Wed, 4 Nov 2009 16:30:08 +0000 (08:30 -0800)]
isdn: eicon: Return on error

When diva_strace_read_uint returns an error, return even from
process_idi_event, because l2_state is uninitialized.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Acked-by: Armin Schindler <armin@melware.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoisdn: eicon: Use offsetof
Jiri Slaby [Wed, 4 Nov 2009 16:28:12 +0000 (08:28 -0800)]
isdn: eicon: Use offsetof

Use offsetof instead of explicit implementation.

* fixes bug with omitted & like:
  len = (byte)(((T30_INFO *) 0)->station_id + 20)

* avoids compiler warnings with wrong sizes (pointer-to-char cast):
  len = (byte)(&(((T30_INFO *) 0)->universal_6));

* cleans up the code

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Acked-by: Armin Schindler <armin@melware.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agomisdn: Fix reversed 'if' in st_own_ctrl
Dan Carpenter [Wed, 4 Nov 2009 16:27:09 +0000 (08:27 -0800)]
misdn: Fix reversed 'if' in st_own_ctrl

The current code probably returns -EINVAL a lot.  Otherwise it would oops.

Compile tested only.  Found by smatch (http://repo.or.cz/w/smatch.git).

Signed-off-by: Dan Carpenter <error27@gmail.com>
Cc: Karsten Keil <isdn@linux-pingi.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoisdn: hisax: Fix lock imbalance.
Jiri Slaby [Wed, 4 Nov 2009 16:25:57 +0000 (08:25 -0800)]
isdn: hisax: Fix lock imbalance.

Add omittted unlocks to 2 functions.

Signed-off-by: Jiri Slaby <jirislaby@gmail.com>
Cc: Karsten Keil <Karsten-Keil@t-online.de>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoDaVinci EMAC: correct param for ISR
Tonyliu [Wed, 4 Nov 2009 13:45:02 +0000 (05:45 -0800)]
DaVinci EMAC: correct param for ISR

emac_irq is declared as:

static irqreturn_t emac_irq(int irq, void *dev_id)
{
       struct net_device *ndev = (struct net_device *)dev_id;
       struct emac_priv *priv = netdev_priv(ndev);
    ...

Clearly emac_irq() needs "struct net_device *" as "void *dev_id", so correct this.

Signed-off-by: Tonyliu <Bo.Liu@windriver.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: Introduce for_each_netdev_rcu() iterator
Eric Dumazet [Wed, 4 Nov 2009 13:43:23 +0000 (05:43 -0800)]
net: Introduce for_each_netdev_rcu() iterator

Adds RCU management to the list of netdevices.

Convert some for_each_netdev() users to RCU version, if
it can avoid read_lock-ing dev_base_lock

Ie:
read_lock(&dev_base_loack);
for_each_netdev(net, dev)
some_action();
read_unlock(&dev_base_lock);

becomes :

rcu_read_lock();
for_each_netdev_rcu(net, dev)
some_action();
rcu_read_unlock();

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agocdc_ether: additional Ericsson MBM PID's to the whitelist
Torgny Johansson [Wed, 4 Nov 2009 13:25:02 +0000 (05:25 -0800)]
cdc_ether: additional Ericsson MBM PID's to the whitelist

Signed-off-by: Torgny Johansson <torgny.johansson@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoem_meta: avoid one dev_put()
Eric Dumazet [Wed, 4 Nov 2009 13:23:31 +0000 (05:23 -0800)]
em_meta: avoid one dev_put()

Another rcu conversion to avoid one dev_hold()/dev_put() pair

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agobnx2: avoid compiler warnings
Eric Dumazet [Mon, 2 Nov 2009 23:17:42 +0000 (23:17 +0000)]
bnx2: avoid compiler warnings

drivers/net/bnx2.c: In function ‘bnx2_enable_forced_2g5’:
drivers/net/bnx2.c:1447: warning: ‘bmcr’ may be used uninitialized in this function
drivers/net/bnx2.c: In function ‘bnx2_disable_forced_2g5’:
drivers/net/bnx2.c:1482: warning: ‘bmcr’ may be used uninitialized in this function

One fix would be to have an initial value, but a plain return might be better.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agonet: cleanup include/net
Eric Dumazet [Tue, 3 Nov 2009 03:26:03 +0000 (03:26 +0000)]
net: cleanup include/net

This cleanup patch puts struct/union/enum opening braces,
in first line to ease grep games.

struct something
{

becomes :

struct something {

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoPhonet: remove tautologies
Rémi Denis-Courmont [Mon, 2 Nov 2009 22:41:28 +0000 (22:41 +0000)]
Phonet: remove tautologies

These checks don't make sense anymore since rtnl_notify() cannot fail.

Signed-off-by: Rémi Denis-Courmont <remi.denis-courmont@nokia.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agotrivial: remove duplicated MIN macro from tehuti.
Thiago Farina [Tue, 3 Nov 2009 03:10:29 +0000 (03:10 +0000)]
trivial: remove duplicated MIN macro from tehuti.

Since the kernel api already has the macro "min",
just use it instead of declaring another one.

Signed-off-by: Thiago Farina <tfransosi@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agocnic: ensure ulp_type is not negative
roel kluin [Mon, 2 Nov 2009 06:53:44 +0000 (06:53 +0000)]
cnic: ensure ulp_type is not negative

`ulp_type' is signed, make sure it is not negative
when we read the array element.

Signed-off-by: Roel Kluin <roel.kluin@gmail.com>
Acked-by: Michael Chan <mchan@broadcom.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoqlge: Clean up netdev->stats usage.
Ron Mercer [Tue, 3 Nov 2009 13:49:31 +0000 (13:49 +0000)]
qlge: Clean up netdev->stats usage.

Don't access netdev->stats in IO path.  Save them in tx_ring/rx_rings
and add them up when get_stats API is called.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoqlge: Add firmware/driver sub-command support.
Ron Mercer [Tue, 3 Nov 2009 13:49:30 +0000 (13:49 +0000)]
qlge: Add firmware/driver sub-command support.

These sub-commands are issued by another (FCoE) function requesting
an operation on a shared resource.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agoqlge: Fix indentations.
Ron Mercer [Tue, 3 Nov 2009 13:49:29 +0000 (13:49 +0000)]
qlge: Fix indentations.

Signed-off-by: Ron Mercer <ron.mercer@qlogic.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agowimax/i2400m: fix inverted value in i2400ms_bus_setup()
Inaky Perez-Gonzalez [Tue, 27 Oct 2009 21:33:45 +0000 (14:33 -0700)]
wimax/i2400m: fix inverted value in i2400ms_bus_setup()

Fix inverted setting of 'retries'; when we are in the probe() path, we
should retry to enable the function only once; otherwise until it
times out.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
15 years agowimax/i2400m: fix SDIO debugfs dentry name
Inaky Perez-Gonzalez [Mon, 26 Oct 2009 16:27:02 +0000 (09:27 -0700)]
wimax/i2400m: fix SDIO debugfs dentry name

The SDIO specific debugfs dentry was being misnamed "i2400m-usb"
instead of "i2400m-sdio".

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
15 years agowimax/i2400m: fix bad assignment of return value in i2400mu_tx_bulk_out
Inaky Perez-Gonzalez [Sat, 24 Oct 2009 00:31:31 +0000 (17:31 -0700)]
wimax/i2400m: fix bad assignment of return value in i2400mu_tx_bulk_out

The function was always setting the return value to the amount of
bytes transferred, overwriting the error code in error paths.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
15 years agowimax/i2400m: handle USB stalls
Inaky Perez-Gonzalez [Tue, 20 Oct 2009 02:10:59 +0000 (11:10 +0900)]
wimax/i2400m: handle USB stalls

When the device stalls, clear it and retry; if it keeps failing too
often, reset the device.

This specially happens when running on virtual machines; the real
hardware doesn't seem to trip on stalls too much, except for a few
reports in the mailing list (still to be confirmed this is the cause,
although it seems likely.

NOTE: it is not clear if the URB has to be resubmitted fully or start
only at the offset of the first transaction sent. Can't find
documentation to clarify one end or the other.

Tests that just resubmit the whole URB seemed to work in my
environment.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
15 years agowimax/i2400m: don't retry SDIO enable in probe() paths
Inaky Perez-Gonzalez [Sat, 24 Oct 2009 00:48:36 +0000 (17:48 -0700)]
wimax/i2400m: don't retry SDIO enable in probe() paths

The iwmc3200 has a quirk where retrying SDIO enable during the probe()
path causes bad interactions with the TOP function controller that
causes a reset storm. The workaround is simply not to retry an SDIO
enable in said path (and still do in the reset / reinitialization
paths).

The driver does so by checking i2400ms->debugfs_dentry to see if it
has been initialized; if not, it is in the probe() path. Document said
fact in i2400ms->debugfs_entry.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
15 years agowimax/i2400m: correctly identify all iwmc3200-based SKUs
Inaky Perez-Gonzalez [Sat, 24 Oct 2009 00:45:07 +0000 (17:45 -0700)]
wimax/i2400m: correctly identify all iwmc3200-based SKUs

Different paths of the i2400m SDIO driver need to take care of a few
SKU-specific quirks. For the ones that are common to to all the
iwmc3200 based devices, introduce i2400ms->iwmc3200 [set in
i2400ms_probe()], so it doesn't have to check against the list of
iwmc3200 SKU IDs on each quirk site.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
15 years agowimax/i2400m: Fix USB timeout specifications (to ms from HZ)
Inaky Perez-Gonzalez [Tue, 20 Oct 2009 02:09:25 +0000 (11:09 +0900)]
wimax/i2400m: Fix USB timeout specifications (to ms from HZ)

The USB code was incorrectly specifiying timeouts to be in jiffies vs
msecs. On top of that, lower it to 200ms, as 1s is really too long
(doesn't allow the watchdog to trip a reset if the device timesout too
often).

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
15 years agowimax/i2400m: fix device getting stuck in IDLE mode
Inaky Perez-Gonzalez [Thu, 15 Oct 2009 09:16:08 +0000 (18:16 +0900)]
wimax/i2400m: fix device getting stuck in IDLE mode

The i2400m, when conected, will negotiate with the WiMAX basestation
to put the link in IDLE mode when it is not being used. Upon RX/TX
traffic, the link has to be restablished and that might require some
crypto handshakes and maybe a DHCP renew.

This process might take up to 20 (!) seconds and in some cases we were
seeing network watchdog warnings that weren't needed.

So the network watchdog timeout is updated to be slightly above that
20s threshold. As well, the driver itself will double check if the
device is stuck in IDLE mode -- if that happens, the device will be
reset (in this case the queue is also woken up to remove bogus--once
the device is reset--warnings).

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
15 years agowimax/i2400m: introduce i2400m_reset(), stopping TX and carrier
Inaky Perez-Gonzalez [Mon, 19 Oct 2009 07:24:56 +0000 (16:24 +0900)]
wimax/i2400m: introduce i2400m_reset(), stopping TX and carrier

Currently the i2400m driver was resetting by just calling
i2400m->bus_reset(). However, this was missing stopping the TX queue
and downing the carrier. This was causing, for the corner case of the
driver reseting a device that refuses to go out of idle mode, that a
few packets would be queued and more than one reset would go through,
making the recovery a wee bit messy.

To avoid introducing the same cleanup in all the bus-specific driver,
introduced a i2400m_reset() function that takes care of house cleaning
and then calling the bus-level reset implementation.

The bulk of the changes in all files are just to rename the call from
i2400m->bus_reset() to i2400m_reset().

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
15 years agowimax/i2400m: implement passive mode as a module option
Inaky Perez-Gonzalez [Mon, 19 Oct 2009 14:11:26 +0000 (23:11 +0900)]
wimax/i2400m: implement passive mode as a module option

Some versions of the user space Intel WiMAX daemon need to have full
control over the device initialization sequence. By setting the module
option i2400.passive_mode to 1, the driver defers all device
configuration and initialization to user space.

Signed-off-by: Inaky Perez-Gonzalez <inaky@linux.intel.com>
15 years agotc35815: Kill unused code
Atsushi Nemoto [Mon, 2 Nov 2009 04:34:47 +0000 (04:34 +0000)]
tc35815: Kill unused code

- TC35815_DMA_SYNC_ONDEMAND is always enabled.
- WORKAROUND_LOSTCAR is always enabled.
- WORKAROUND_100HALF_PROMISC is always enabled.
- GATHER_TXINT is always enabled.
- TC35815_USE_PACKEDBUFFER is always disabled.
- NO_CHECK_CARRIER is always disabled.

Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agotc35815: Kill non-napi code
Atsushi Nemoto [Mon, 2 Nov 2009 04:34:46 +0000 (04:34 +0000)]
tc35815: Kill non-napi code

Signed-off-by: Atsushi Nemoto <anemo@mba.ocn.ne.jp>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agogianfar: Basic Support for programming hash rules
Sandeep Gopalpet [Mon, 2 Nov 2009 07:03:40 +0000 (07:03 +0000)]
gianfar: Basic Support for programming hash rules

This patch provides basic hash rules programming via the ethtool
interface.

Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agogianfar: Add Multiple group Support
Sandeep Gopalpet [Mon, 2 Nov 2009 07:03:34 +0000 (07:03 +0000)]
gianfar: Add Multiple group Support

This patch introduces multiple group support for etsec2.0
devices.

Multiple group support is provided by mapping the set of enabled
queues to different groups and then programming the per group
regsiters imask, ievent, rstat, tstat.

The queues corresponding to a group are indicated by programming
isrg (interrupt steering) registers.

Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agogianfar: Add support etsec2.0 registers.
Sandeep Gopalpet [Mon, 2 Nov 2009 07:03:28 +0000 (07:03 +0000)]
gianfar: Add support etsec2.0 registers.

This patch adds support for etsec2.0 regsiters

Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
15 years agofsl_pq_mdio: Add Suport for etsec2.0 devices.
Sandeep Gopalpet [Mon, 2 Nov 2009 07:03:22 +0000 (07:03 +0000)]
fsl_pq_mdio: Add Suport for etsec2.0 devices.

This patch adds mdio support for etsec2.0 devices.

Modified the fsl_pq_mdio structure to include the new mdio
members.

Signed-off-by: Sandeep Gopalpet <Sandeep.Kumar@freescale.com>
Signed-off-by: David S. Miller <davem@davemloft.net>