Felix Fietkau [Sun, 6 Sep 2015 09:57:02 +0000 (09:57 +0000)]
uboot-ar71xx: fix gcc 5.2 compile errors
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46797
Jonas Gorski [Fri, 4 Sep 2015 14:46:06 +0000 (14:46 +0000)]
ipq806x: add support for Netgear Nighthawk X4 R7500
Add support for the Netgear Nighthawk X4 R7500 and build
appropariate sysupgrade and factory images.
Known issues:
* 5 GHz wifi not working - there is no quantenna driver
* One of the USB ports is not working
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46796
Jonas Gorski [Fri, 4 Sep 2015 14:45:49 +0000 (14:45 +0000)]
ipq806x: enable ide led trigger
To use gpio leds as ide leds, we need to enable the trigger to be
included in the kernel.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46795
Jonas Gorski [Fri, 4 Sep 2015 14:45:45 +0000 (14:45 +0000)]
base-files: allow setting ide-disk led trigger
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46794
Jonas Gorski [Fri, 4 Sep 2015 14:45:40 +0000 (14:45 +0000)]
ipq806x: add support for retrieving macs from mtd
Add support for mtd-mac-address for stmac.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46793
Jonas Gorski [Fri, 4 Sep 2015 14:45:16 +0000 (14:45 +0000)]
image: allow exactly KERNEL_SIZE sized kernels
The KERNEL_SIZE should be the maximum size, inclusive, so we need to
check for greater equal, not just greater.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46792
Jonas Gorski [Fri, 4 Sep 2015 14:45:09 +0000 (14:45 +0000)]
image: move netgear-image to top and rename to -dni
Use the same naming as netgear-chk.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46791
Jonas Gorski [Fri, 4 Sep 2015 14:45:04 +0000 (14:45 +0000)]
ar71xx: rename NETGEAR_ variables to their netgear names
Netgear names them BOARD_ID and HW_ID, so we should do the same.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46790
Jonas Gorski [Fri, 4 Sep 2015 14:45:00 +0000 (14:45 +0000)]
ipq806x: build images and add sysupgrade support for AP148
Add full ubi and sysupgrade images for AP148 and add sysupgrade support
for ipq806x to allow updating the current installation.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46789
Jonas Gorski [Fri, 4 Sep 2015 14:44:51 +0000 (14:44 +0000)]
ipq806x: clear IMAGES for devices
Ensure that IMAGE-less devices won't keep the IMAGES of any previous
devices.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46788
Jonas Gorski [Fri, 4 Sep 2015 14:44:48 +0000 (14:44 +0000)]
ipq806x: wrap legacy image in uImage
Wrap the zImage in a uImage header so we can easily boot it from legacy
u-boots.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46787
Jonas Gorski [Fri, 4 Sep 2015 14:44:44 +0000 (14:44 +0000)]
ipq806x: rename "rootfs" to "ubi" on nand
OpenWrt expects the ubi paritition to be named "ubi", not "rootfs".
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46786
Jonas Gorski [Fri, 4 Sep 2015 14:44:36 +0000 (14:44 +0000)]
ipq806x: enable smem-parser for nand on AP148
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46785
Jonas Gorski [Fri, 4 Sep 2015 14:44:27 +0000 (14:44 +0000)]
build: add a build step for generic sysupgrade nand image
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46784
Jonas Gorski [Fri, 4 Sep 2015 14:44:10 +0000 (14:44 +0000)]
image: add a build step for building and appending an ubinized rootfs
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46783
Jonas Gorski [Fri, 4 Sep 2015 14:44:04 +0000 (14:44 +0000)]
ipq806x: enable ubiblock support
To allow squashfs on ubi, enable ubiblock support in the kernel.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46782
Steven Barth [Fri, 4 Sep 2015 06:29:36 +0000 (06:29 +0000)]
odhcp6c: correctly extend prefix from RAs
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46781
Steven Barth [Thu, 3 Sep 2015 15:53:40 +0000 (15:53 +0000)]
comgt/umbim/uqmi: enable RFC 7278 for 3g/4g by default
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46780
Steven Barth [Thu, 3 Sep 2015 15:53:33 +0000 (15:53 +0000)]
odhcp6c: add RFC 7278 3gpp IPv6 prefix extension
Use option extendprefix 1 to enable
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46779
Felix Fietkau [Thu, 3 Sep 2015 13:15:19 +0000 (13:15 +0000)]
mdns: update to the latest version, fixes a spurious build error
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46778
Felix Fietkau [Thu, 3 Sep 2015 13:15:05 +0000 (13:15 +0000)]
uclibc++: fix build with gcc 5.2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46777
Felix Fietkau [Thu, 3 Sep 2015 13:14:56 +0000 (13:14 +0000)]
libpcap: update to version 1.7.4
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46776
Felix Fietkau [Thu, 3 Sep 2015 13:14:50 +0000 (13:14 +0000)]
gdb: update to the latest version, fixes a build error with gcc 5.2
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46775
Felix Fietkau [Thu, 3 Sep 2015 13:14:44 +0000 (13:14 +0000)]
gcc: add ARM codegen fix from PR 65932
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46774
Felix Fietkau [Wed, 2 Sep 2015 16:22:44 +0000 (16:22 +0000)]
ar7: fix HIGHMEM_START (#20427)
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46773
Felix Fietkau [Wed, 2 Sep 2015 15:44:17 +0000 (15:44 +0000)]
musl: update to version 1.1.11
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46772
Jo-Philipp Wich [Wed, 2 Sep 2015 11:54:03 +0000 (11:54 +0000)]
base-files: add /etc/hosts entries for ::1, ff02::1 and ff02::2
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46771
Steven Barth [Wed, 2 Sep 2015 11:49:00 +0000 (11:49 +0000)]
dnsmasq: make /tmp/dnsmasq.d and /tmp/hosts preferred over UCI settings
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46770
Steven Barth [Wed, 2 Sep 2015 11:48:57 +0000 (11:48 +0000)]
dropbear: bump to 2015.68
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46769
Jonas Gorski [Wed, 2 Sep 2015 10:18:15 +0000 (10:18 +0000)]
kernel: update 3.18 to 3.18.21
Changelog:
* https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.21
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46768
Felix Fietkau [Wed, 2 Sep 2015 09:24:05 +0000 (09:24 +0000)]
ramips: fix devicetree corruption with some boot loaders if the caches are not ready at boot
Signed-off-by: John Crispin <blogic@openwrt.org>
SVN-Revision: 46766
Felix Fietkau [Wed, 2 Sep 2015 09:23:59 +0000 (09:23 +0000)]
kernel: bridge, multicast-to-unicast: fix echoes on STA
Currently, multicast packets from an STA are sent to any according
multicast listener directly through the bridge multicast-to-unicast
feature. Unfortunately, so far this includes the originating STA, too,
resulting in multicast packets being echo'ed back to the originating STA
if it itself is a multicast listener for that group.
This behaviour breaks IPv6 duplicate address detection: An IPv6 Neighbor
Solicitation for IPv6 Duplicate Address Detection is being echo'ed back,
resulting in the host falsely detecting an address collision, which
makes the node unable to claim an IPv6 address and use IPv6 in general.
Mac80211 unfortunately only prevents the echoes for us for multicast
frames. For the multicast frames cast to a unicast destination we'll
need to take care of excluding the originator ourselves.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
SVN-Revision: 46765
Felix Fietkau [Wed, 2 Sep 2015 09:23:52 +0000 (09:23 +0000)]
mdns: fix having mulitple network entries in uci
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46764
Steven Barth [Tue, 1 Sep 2015 18:48:22 +0000 (18:48 +0000)]
map: add debug-code for mapcalc
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46763
Steven Barth [Tue, 1 Sep 2015 18:48:15 +0000 (18:48 +0000)]
polarssl: bump to 1.3.12
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46762
Steven Barth [Tue, 1 Sep 2015 13:31:00 +0000 (13:31 +0000)]
odhcpd: fix incorrect address assignment for DHCPv6
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46761
Jonas Gorski [Sun, 30 Aug 2015 12:18:22 +0000 (12:18 +0000)]
lantiq: remove dead EASY33016 image recipe
Support for lantiq_svip_be has been removed a while ago, so EASY33016
images weren't buildable anymore. Remove the recipes as well as gzip
compressed kernel support, as EASY33016 was the last user of it.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46760
Jonas Gorski [Sun, 30 Aug 2015 12:18:14 +0000 (12:18 +0000)]
ramips: disable the openwrt commandline hack
We don't make use of it, so no need to have it enabled.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46759
Jonas Gorski [Sun, 30 Aug 2015 12:18:05 +0000 (12:18 +0000)]
malta: disable the openwrt commandline hack
We don't make use of it, so no need to have it enabled.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46758
Jonas Gorski [Sun, 30 Aug 2015 12:18:00 +0000 (12:18 +0000)]
brcm63xx: disable the openwrt commandline hack
We don't make use of it, so no need to have it enabled.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46757
Jonas Gorski [Sun, 30 Aug 2015 12:17:57 +0000 (12:17 +0000)]
brcm47xx: disable the openwrt commandline hack
We don't make use of it, so no need to have it enabled.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46756
Jonas Gorski [Sun, 30 Aug 2015 12:17:56 +0000 (12:17 +0000)]
ath25: disable the openwrt commandline hack
We don't make use of it, so no need to have it enabled.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46755
Jonas Gorski [Sun, 30 Aug 2015 12:17:54 +0000 (12:17 +0000)]
adm5120: disable the openwrt commandline hack
We don't make use of it, so no need to have it enabled.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46754
Jonas Gorski [Sun, 30 Aug 2015 12:17:52 +0000 (12:17 +0000)]
brcm63xx: remove legacy led/button related patches
We register all gpio buttons and leds through DT, so no need to keep
fixes/additions for the platform data based bay.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46753
Jonas Gorski [Sun, 30 Aug 2015 12:17:46 +0000 (12:17 +0000)]
brcm63xx: add Comtrend VR-3026e support
Add support for Comtrend VR-3026e v1.
The device is almost identical to the Comtrend VR-3025un.
Signed-off-by: Martin Tesar <tesarmar@gmail.com>
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46752
Hauke Mehrtens [Sat, 29 Aug 2015 20:05:04 +0000 (20:05 +0000)]
broadcom-wl: add interface after bridge is up
Without this patch adding the wifi device to the bridge may fail
because the bridge is not already configured when the wifi device gets
configured. This patch makes broadcom-wl wait till the bridge is ready.
This fixes #17262
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46749
Hauke Mehrtens [Sat, 29 Aug 2015 17:38:15 +0000 (17:38 +0000)]
broadcom-wl: fix bash comparison error
This fixes #17495
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46746
Hauke Mehrtens [Sat, 29 Aug 2015 17:37:41 +0000 (17:37 +0000)]
broadcom-wl: fix section mismatches in broadcom-wl driver
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46745
Hauke Mehrtens [Sat, 29 Aug 2015 17:37:09 +0000 (17:37 +0000)]
broadcom-wl: fix build with kernel 4.1
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
SVN-Revision: 46744
Rafał Miłecki [Sat, 29 Aug 2015 09:23:19 +0000 (09:23 +0000)]
brcm47xx: fix Linksys E1200 V2 image filename
Drop unwanted suffix (copy & paste mistake).
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46742
Felix Fietkau [Fri, 28 Aug 2015 07:05:41 +0000 (07:05 +0000)]
mt76: update to the latest version, fixes some tx power issues
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46741
Rafał Miłecki [Thu, 27 Aug 2015 14:39:30 +0000 (14:39 +0000)]
mac80211: add pending brcmfmac patch fixing warm reboots
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46739
Felix Fietkau [Thu, 27 Aug 2015 12:43:27 +0000 (12:43 +0000)]
uci: update to the latest version, adds various fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46738
Felix Fietkau [Thu, 27 Aug 2015 12:43:22 +0000 (12:43 +0000)]
hostapd: properly enable 802.11w support
Add CONFIG_IEEE80211W variable to DRIVER_MAKEOPTS so that 802.11w
support is properly compiled in full variant.
This fixes #20179
Signed-off-by: Janusz Dziemidowicz <rraptorr@nails.eu.org>
SVN-Revision: 46737
Rafał Miłecki [Wed, 26 Aug 2015 22:10:14 +0000 (22:10 +0000)]
mac80211: add pending brcmfmac patches fixing multiple interfaces
So far support for multiple interface was somehow broken in brcmfmac.
Driver couldn't correctly match firmware and system interfaces resulting
in not working APs and WARNINGs. This pending patches fixes that :)
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46734
Rafał Miłecki [Wed, 26 Aug 2015 15:21:14 +0000 (15:21 +0000)]
bcm53xx: support sysupgrade with Netgear R7000 original firmware
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46732
Rafał Miłecki [Wed, 26 Aug 2015 15:21:07 +0000 (15:21 +0000)]
bcm53xx: add OpenWrt specific stuff for Netgear R7000
This adds DT things that couldn't be upstreamed yet.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46731
Rafał Miłecki [Wed, 26 Aug 2015 14:51:47 +0000 (14:51 +0000)]
bcm53xx: use pending Netgear R7000 patch
It includes support for LEDs and buttons.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46730
Rafał Miłecki [Wed, 26 Aug 2015 14:39:06 +0000 (14:39 +0000)]
bcm53xx: use backported patches for UART0 and profiling
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46729
Jonas Gorski [Wed, 26 Aug 2015 13:03:09 +0000 (13:03 +0000)]
brcm63xx: fix WAP-5813n default network config
/etc/uci-defaults/02_network had a typo, making it generate the wrong
network config.
Closes #20407.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46727
Jonas Gorski [Wed, 26 Aug 2015 10:11:41 +0000 (10:11 +0000)]
linux: fix off-by-one in handling in /proc/net/route
Add an upstream fix for /proc/net/route causing missing routes doing
several continued reads from it.
Only 4.1+ is affected.
Closes #20403.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46726
Jonas Gorski [Tue, 25 Aug 2015 22:04:53 +0000 (22:04 +0000)]
brcm63xx: enable dual rx/tx spi support for hsspi
should improve flash access times. Should be harmless to gnerally
enable regardless if a flash supporting dual reads is attached. In
doubt, spi-nor will just fall back to serial reads.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46725
Rafał Miłecki [Tue, 25 Aug 2015 15:20:48 +0000 (15:20 +0000)]
mac80211: backport latest patches except for NVRAM support
We sill don't use kernel 4.2 which is required for backporting using
upstream NVRAM support patch.
Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
SVN-Revision: 46724
Felix Fietkau [Tue, 25 Aug 2015 07:46:32 +0000 (07:46 +0000)]
scripts/patch-kernel.sh: remove -E flag to preserve empty files touched by patches
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46723
Felix Fietkau [Tue, 25 Aug 2015 07:45:42 +0000 (07:45 +0000)]
rules.mk: remove GCC 4.4 and GCC 4.5 conditional
gcc 4.4 was removed in r44957 gcc: remove 4.4.7 (only used by avr32)
gcc 4.5 was removed in r36149
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46722
Felix Fietkau [Tue, 25 Aug 2015 07:25:20 +0000 (07:25 +0000)]
kernel: bridge, multicast-to-unicast: assign src after pskb_may_pull()
A call to pskb_may_pull() might reallocate skb->data. Therefore we
should only assign the src-pointer after any potential reallocations.
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46721
Felix Fietkau [Tue, 25 Aug 2015 07:25:10 +0000 (07:25 +0000)]
Revert "kernel: disable multicast-to-unicast translation for ipv6 neighbor solicitation (#17625)"
This reverts commit
a080e8e1943156168913d0353a2e99d1151102aa.
It did not fix the problem but just hid some symptom. The real issue was
that IGMP/MLD report suppression was not considered for the
multicast-to-unicast feature. A recent netifd which isolates IGMP/MLD
reports between STAs by utilizing AP-isolation and bridge-hairpinning
should have fixed this.
It is perfectly fine to apply multicast-to-unicast to IPv6 Neighbor
Solicitations, too (once that feature is configured correctly).
Signed-off-by: Linus Lüssing <linus.luessing@c0d3.blue>
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46720
Felix Fietkau [Tue, 25 Aug 2015 07:24:53 +0000 (07:24 +0000)]
netifd: update to the latest version, adds multicast-to-unicast fixes
Signed-off-by: Felix Fietkau <nbd@openwrt.org>
SVN-Revision: 46719
Steven Barth [Tue, 25 Aug 2015 06:27:37 +0000 (06:27 +0000)]
netifd: various updates
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46718
Steven Barth [Mon, 24 Aug 2015 08:53:16 +0000 (08:53 +0000)]
omcproxy: fix last commit
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46717
Steven Barth [Mon, 24 Aug 2015 08:28:11 +0000 (08:28 +0000)]
omcproxy: add new igmpv3 & mldv2 multicast proxy
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46716
Jonas Gorski [Sun, 23 Aug 2015 21:33:57 +0000 (21:33 +0000)]
kernel: remove already upstream applied patch
Remove 131-MIPS-export-get_c0_perfcount_int.patch which was already applied
in 4.1.6. This fixes the following build error:
arch/mips/ath79/setup.c:217:77: error: redefinition of '__kstrtab_get_c0_perfcount_int'
arch/mips/ath79/setup.c:211:77: note: previous definition of '__kstrtab_get_c0_perfcount_int' was here
arch/mips/ath79/setup.c:217:350: error: redefinition of '__ksymtab_get_c0_perfcount_int'
arch/mips/ath79/setup.c:211:350: note: previous definition of '__ksymtab_get_c0_perfcount_int' was here
scripts/Makefile.build:258: recipe for target 'arch/mips/ath79/setup.o' failed
Reported-by: swalker
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46715
Jonas Gorski [Sun, 23 Aug 2015 19:11:07 +0000 (19:11 +0000)]
adm5120: make patches apply again
Fix patches not applying anymore since r46654.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46714
Jonas Gorski [Sun, 23 Aug 2015 18:06:11 +0000 (18:06 +0000)]
kernel: update 4.1 to 4.1.6
Changelog:
* https://www.kernel.org/pub/linux/kernel/v4.x/ChangeLog-4.1.6
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46713
Jonas Gorski [Sun, 23 Aug 2015 13:35:03 +0000 (13:35 +0000)]
mvebu: kirkwood: fix ehci-orion probe if generic-phy isn't enabled
Properly treat -ENOSYS as no PHY, else ehci-orion won't work without
generic phy support.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46711
Jonas Gorski [Sun, 23 Aug 2015 09:36:03 +0000 (09:36 +0000)]
mac80211: disable ipw2x00 for big endian targets
The ipw2x00 drivers assume that the system they are running is little
endian, and access everything in native byte order. When run on a big
endian system, everything breaks apart.
Since fixing this is non trivial on a first glance, disable them for
big endian targets.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46708
Jonas Gorski [Sun, 23 Aug 2015 09:35:56 +0000 (09:35 +0000)]
brcm63xx: ensure dummy byte is set for mapped spi flash with fast read
Some CFEs seem to misconfigure the mapped memory flash access with
fast read but without a dummy byte, causing all accesses to be prefixed
with 0xff.
This of course breaks reading out the nvram, so do not just move back to
single i/o accessors, but also ensure that the dummy byte is correctly
set.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46707
Jonas Gorski [Sun, 23 Aug 2015 09:35:46 +0000 (09:35 +0000)]
scripts/feeds: allow export of feeds with static revisions
Add a switch to scripts/feeds that allows listing the feeds with their
currently checked out revisions in feeds.conf compatible format.
This allows providing a feeds.conf for public builds to make replication
of the build easier.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
SVN-Revision: 46706
Zoltan Herpai [Fri, 21 Aug 2015 13:23:29 +0000 (13:23 +0000)]
sunxi: bump to 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46705
Zoltan Herpai [Fri, 21 Aug 2015 13:16:11 +0000 (13:16 +0000)]
sunxi: add audio module for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46704
Zoltan Herpai [Fri, 21 Aug 2015 10:16:15 +0000 (10:16 +0000)]
sunxi: update ahci package list for a couple board profiles
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46703
Zoltan Herpai [Fri, 21 Aug 2015 10:08:07 +0000 (10:08 +0000)]
sunxi: reorganize kmod-ata-sunxi dependencies
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 46702
Zoltan Herpai [Fri, 21 Aug 2015 09:48:05 +0000 (09:48 +0000)]
Newer kernels make use of libahci in ahci-platform, ie. also on non-PCI platforms. As there is no single config symbol deciding whether libahci.ko is being built or not it seems the most sensitive thing to package it in kmod-ata-core.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
SVN-Revision: 46701
Imre Kaloz [Fri, 21 Aug 2015 08:10:48 +0000 (08:10 +0000)]
This had been set in r44508 as a workaround for switch problems.
Now that the switch driver can handle two devices with
the same MAC address in separate VLANs we can go back
to using the same address on both interfaces.
This is the Linksys firmware's default behavior.
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46700
Imre Kaloz [Fri, 21 Aug 2015 08:09:52 +0000 (08:09 +0000)]
Previously, all VLANs (port-based or 802.1q) were sharing a single database in the ATU. This created problems in the case of a system where two ports/devices share a MAC address (e.g. Linksys WRT1900AC eth0/eth1).
This also clears any bootloader-set FDB defaults. This had
caused issues creating port-based VLANs when mappings
overlapped previous VLANs. Packets destined to a port
not in the default port group flooded all ports.
Tested on a
88E6171 (Linksys EA4500) and
88E6172 ('1900AC)
Signed-off-by: Claudio Leite <leitec@staticky.com>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46699
Imre Kaloz [Fri, 21 Aug 2015 08:01:48 +0000 (08:01 +0000)]
mvebu: fix cobra chainmask
Thanks Sebastian for spotting it.
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46697
Zoltan Herpai [Thu, 20 Aug 2015 23:19:42 +0000 (23:19 +0000)]
kernel: add missing symbols for 4.1
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
SVN-Revision: 46696
Steven Barth [Thu, 20 Aug 2015 12:43:45 +0000 (12:43 +0000)]
odhcpd: various RA improvements
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46694
Imre Kaloz [Wed, 19 Aug 2015 08:45:19 +0000 (08:45 +0000)]
mwlwifi: fix commit hash for 10.3.0.8
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46693
Imre Kaloz [Wed, 19 Aug 2015 08:31:23 +0000 (08:31 +0000)]
mvebu: add support for the Linksys boot counter
The u-boot boot counter was never reset after a successful boot,
which sometimes could make some variables become out of sync.
This patch adds support for the boot counter and enables
auto_recovery unconditionally.
Signed-off-by: Jonas Gorski <jogo@openwrt.org>
Signed-off-by: Rob Mosher <nyt-openwrt@countercultured.net>
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46690
Imre Kaloz [Wed, 19 Aug 2015 08:20:11 +0000 (08:20 +0000)]
uhttpd: we don't know where the device is located, so reflect that in the cert
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46688
Imre Kaloz [Tue, 18 Aug 2015 11:22:47 +0000 (11:22 +0000)]
mwlwifi: upgrade to 10.3.0.8-
20150818
Signed-off-by: Imre Kaloz <kaloz@openwrt.org>
SVN-Revision: 46687
Steven Barth [Tue, 18 Aug 2015 09:20:34 +0000 (09:20 +0000)]
enable strong SSP / Stackprotector on gcc5
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46685
Steven Barth [Tue, 18 Aug 2015 09:18:40 +0000 (09:18 +0000)]
musl: fix getsubopt function
Signed-off-by: Steven Barth <steven@midlink.org>
SVN-Revision: 46684
Steven Barth [Tue, 18 Aug 2015 08:37:38 +0000 (08:37 +0000)]
polarssl: Fix build failures due to PKG_NAME != dir name
Packages that depend on PolarSSL fail to build because polarssl's InstallDev
section never actually gets executed because (prior to this patch) the package
name does not match the subdir the package is in (presumably due to upstream
name change). As a workaround I have changed the package name back to
polarssl and used a new variable SRC_PKG_NAME for the purposes of downloading
the upstream tarball and creating PKG_BUILD_DIR.
Signed-off-by: Daniel Dickinson <openwrt@daniel.thecshore.com>
SVN-Revision: 46683
Hauke Mehrtens [Mon, 17 Aug 2015 21:19:27 +0000 (21:19 +0000)]
mac80211: add mt7601u driver
firmware is not available in linux-firmware yet
so use official driver source
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46682
Jo-Philipp Wich [Mon, 17 Aug 2015 16:17:36 +0000 (16:17 +0000)]
uhttpd: pass X-HTTP-Method-Override header to cgi scripts
Signed-off-by: Jo-Philipp Wich <jow@openwrt.org>
SVN-Revision: 46677
John Crispin [Mon, 17 Aug 2015 16:10:49 +0000 (16:10 +0000)]
at91: fix usb rate backport patch tab mangle
The patch submitted in [46649] was mangled in the use of gmails webmail interface, tabs replaced with spaces, resulting in a patch which dit not apply.
This should fix the issue, sorry for the noise.
Signed-off-by: Ben Whitten <benwhitten@gmail.com>
SVN-Revision: 46676
John Crispin [Mon, 17 Aug 2015 11:26:14 +0000 (11:26 +0000)]
orion: remove IRQF_DISABLED
no-op since 2.6.35
removed in Kernel 4.1
see https://lwn.net/Articles/380931/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46672
John Crispin [Mon, 17 Aug 2015 11:26:02 +0000 (11:26 +0000)]
generic: crypto: remove IRQF_DISABLED
no-op since 2.6.35
removed in Kernel 4.1
see https://lwn.net/Articles/380931/
Signed-off-by: Dirk Neukirchen <dirkneukirchen@web.de>
SVN-Revision: 46671
projects / openwrt / staging / jow.git / log