openwrt/staging/blogic.git
13 years agoafs: Fix oops in afs_unlink_writeback
Anton Blanchard [Fri, 25 Feb 2011 15:33:02 +0000 (15:33 +0000)]
afs: Fix oops in afs_unlink_writeback

I'm seeing the following oops when testing afs:

  Unable to handle kernel paging request for data at address 0x00000008
  ...
  NIP [c0000000003393b0] .afs_unlink_writeback+0x38/0xc0
  LR [c00000000033987c] .afs_put_writeback+0x98/0xec
  Call Trace:
  [c00000000345f600] [c00000000033987c] .afs_put_writeback+0x98/0xec
  [c00000000345f690] [c00000000033ae80] .afs_write_begin+0x6a4/0x75c
  [c00000000345f790] [c00000000012b77c] .generic_file_buffered_write+0x148/0x320
  [c00000000345f8d0] [c00000000012e1b8] .__generic_file_aio_write+0x37c/0x3e4
  [c00000000345f9d0] [c00000000012e2a8] .generic_file_aio_write+0x88/0xfc
  [c00000000345fa90] [c0000000003390a8] .afs_file_write+0x10c/0x178
  [c00000000345fb40] [c000000000188788] .do_sync_write+0xc4/0x128
  [c00000000345fcc0] [c000000000189658] .vfs_write+0xe8/0x1d8
  [c00000000345fd70] [c000000000189884] .SyS_write+0x68/0xb0
  [c00000000345fe30] [c000000000008564] syscall_exit+0x0/0x40

afs_write_begin hits an error and calls afs_unlink_writeback. In there
we do list_del_init on an uninitialised list.

The patch below initialises ->link when creating the afs_writeback struct.

Signed-off-by: Anton Blanchard <anton@samba.org>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Fri, 25 Feb 2011 01:08:48 +0000 (17:08 -0800)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  drm/i915: Fix unintended recursion in ironlake_disable_rc6
  drm/i915: fix corruptions on i8xx due to relaxed fencing
  drm/i915: skip FDI & PCH enabling for DP_A
  agp/intel: Experiment with a 855GM GWB bit
  drm/i915: don't enable FDI & transcoder interrupts after all
  drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch

13 years agoMerge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle...
Dave Airlie [Thu, 24 Feb 2011 22:40:26 +0000 (08:40 +1000)]
Merge branch 'drm-intel-fixes' of git://git./linux/kernel/git/ickle/drm-intel into drm-fixes

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: Fix unintended recursion in ironlake_disable_rc6

13 years agoMerge branch 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvm
Linus Torvalds [Thu, 24 Feb 2011 20:22:14 +0000 (12:22 -0800)]
Merge branch 'kvm-updates/2.6.38' of git://git./virt/kvm/kvm

* 'kvm-updates/2.6.38' of git://git.kernel.org/pub/scm/virt/kvm/kvm:
  KVM: SVM: Advance instruction pointer in dr_intercept

13 years agoMAINTAINERS: Update email address
Herton Ronaldo Krzesinski [Thu, 24 Feb 2011 18:18:07 +0000 (15:18 -0300)]
MAINTAINERS: Update email address

Signed-off-by: Herton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agodrm/i915: Fix unintended recursion in ironlake_disable_rc6
Chris Wilson [Thu, 24 Feb 2011 09:42:52 +0000 (09:42 +0000)]
drm/i915: Fix unintended recursion in ironlake_disable_rc6

After disabling, we're meant to teardown the bo used for the contexts,
not recurse into ourselves again and preventing module unload.

Reported-and-tested-by: Ben Widawsky <bwidawsk@gmail.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
13 years agoblock: bd_link_disk_holder() should hold on to holder_dir
Tejun Heo [Thu, 24 Feb 2011 08:56:32 +0000 (09:56 +0100)]
block: bd_link_disk_holder() should hold on to holder_dir

The new implementation of bd_link_disk_holder() added by 49731baa41d
(block: restore multiple bd_link_disk_holder() support) didn't get an
extra reference for the holder_dir kobject of the slave bdev; however,
bdev kills holder_dir on removal, not release, so if the slave bdev is
removed while there are holder links, the holder_dir will be destroyed
while there still are holder links, which leads to oops later when
bd_unlink_disk_order() tries to remove those links.

Make bd_link_disk_holder() grab an extra reference for the slave's
holder_dir and put it in bd_unlink_disk_holder().

Signed-off-by: Tejun Heo <tj@kernel.org>
Reported-by: "Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@intel.com>
Tested-by: "Hawrylewicz Czarnowski, Przemyslaw" <przemyslaw.hawrylewicz.czarnowski@intel.com>
Cc: Neil Brown <neilb@suse.de>
Cc: Jens Axboe <axboe@kernel.dk>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: fix refcounting in swapon
Miklos Szeredi [Thu, 24 Feb 2011 14:49:53 +0000 (15:49 +0100)]
mm: fix refcounting in swapon

Grab a reference to bdev before calling blkdev_get(), which expects
the refcount to be already incremented and either returns success or
decrements the refcount and returns an error.

The bug was introduced by e525fd89 (block: make blkdev_get/put()
handle exclusive access), which didn't take into account this behavior
of blkdev_get().

Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoblock: fix refcounting in BLKBSZSET
Miklos Szeredi [Thu, 24 Feb 2011 14:45:41 +0000 (15:45 +0100)]
block: fix refcounting in BLKBSZSET

Adam Kovari and others reported that disconnecting an USB drive with
an ntfs-3g filesystem would cause "kernel BUG at fs/inode.c:1421!" to
be triggered.

The BUG could be traced back to ioctl(BLKBSZSET), which would
erroneously decrement the refcount on the bdev.  This is because
blkdev_get() expects the refcount to be already incremented and either
returns success or decrements the refcount and returns an error.

The bug was introduced by e525fd89 (block: make blkdev_get/put()
handle exclusive access), which didn't take into account this behavior
of blkdev_get().

This fixes
  https://bugzilla.kernel.org/show_bug.cgi?id=29202
(and likely 29792 too)

Reported-by: Adam Kovari <kovariadam@gmail.com>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6
Linus Torvalds [Thu, 24 Feb 2011 16:39:46 +0000 (08:39 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/viro/vfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6:
  Unlock vfsmount_lock in do_umount

13 years agoUnlock vfsmount_lock in do_umount
J. R. Okajima [Wed, 23 Feb 2011 07:59:49 +0000 (16:59 +0900)]
Unlock vfsmount_lock in do_umount

By the commit
b3e19d9 2011-01-07 fs: scale mntget/mntput
vfsmount_lock was introduced around testing mnt_count.
Fix the mis-typed 'unlock'

Signed-off-by: J. R. Okajima <hooanon05@yahoo.co.jp>
Acked-by: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: Al Viro <viro@zeniv.linux.org.uk>
13 years agomm: fix possible cause of a page_mapped BUG
Hugh Dickins [Thu, 24 Feb 2011 05:39:49 +0000 (21:39 -0800)]
mm: fix possible cause of a page_mapped BUG

Robert Swiecki reported a BUG_ON(page_mapped) from a fuzzer, punching
a hole with madvise(,, MADV_REMOVE).  That path is under mutex, and
cannot be explained by lack of serialization in unmap_mapping_range().

Reviewing the code, I found one place where vm_truncate_count handling
should have been updated, when I switched at the last minute from one
way of managing the restart_addr to another: mremap move changes the
virtual addresses, so it ought to adjust the restart_addr.

But rather than exporting the notion of restart_addr from memory.c, or
converting to restart_pgoff throughout, simply reset vm_truncate_count
to 0 to force a rescan if mremap move races with preempted truncation.

We have no confirmation that this fixes Robert's BUG,
but it is a fix that's worth making anyway.

Signed-off-by: Hugh Dickins <hughd@google.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomm: prevent concurrent unmap_mapping_range() on the same inode
Miklos Szeredi [Wed, 23 Feb 2011 12:49:47 +0000 (13:49 +0100)]
mm: prevent concurrent unmap_mapping_range() on the same inode

Michael Leun reported that running parallel opens on a fuse filesystem
can trigger a "kernel BUG at mm/truncate.c:475"

Gurudas Pai reported the same bug on NFS.

The reason is, unmap_mapping_range() is not prepared for more than
one concurrent invocation per inode.  For example:

  thread1: going through a big range, stops in the middle of a vma and
     stores the restart address in vm_truncate_count.

  thread2: comes in with a small (e.g. single page) unmap request on
     the same vma, somewhere before restart_address, finds that the
     vma was already unmapped up to the restart address and happily
     returns without doing anything.

Another scenario would be two big unmap requests, both having to
restart the unmapping and each one setting vm_truncate_count to its
own value.  This could go on forever without any of them being able to
finish.

Truncate and hole punching already serialize with i_mutex.  Other
callers of unmap_mapping_range() do not, and it's difficult to get
i_mutex protection for all callers.  In particular ->d_revalidate(),
which calls invalidate_inode_pages2_range() in fuse, may be called
with or without i_mutex.

This patch adds a new mutex to 'struct address_space' to prevent
running multiple concurrent unmap_mapping_range() on the same mapping.

[ We'll hopefully get rid of all this with the upcoming mm
  preemptibility series by Peter Zijlstra, the "mm: Remove i_mmap_mutex
  lockbreak" patch in particular.  But that is for 2.6.39 ]

Signed-off-by: Miklos Szeredi <mszeredi@suse.cz>
Reported-by: Michael Leun <lkml20101129@newton.leun.net>
Reported-by: Gurudas Pai <gurudas.pai@oracle.com>
Tested-by: Gurudas Pai <gurudas.pai@oracle.com>
Acked-by: Hugh Dickins <hughd@google.com>
Cc: stable@kernel.org
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoRevert "Bluetooth: Enable USB autosuspend by default on btusb"
Linus Torvalds [Thu, 24 Feb 2011 03:42:03 +0000 (19:42 -0800)]
Revert "Bluetooth: Enable USB autosuspend by default on btusb"

This reverts commit 556ea928f78a390fe16ae584e6433dff304d3014.

Jeff Chua reports that it can cause some bluetooth devices (he mentions
an Bluetooth Intermec scanner) to just stop responding after a while
with messages like

  [ 4533.361959] btusb 8-1:1.0: no reset_resume for driver btusb?
  [ 4533.361964] btusb 8-1:1.1: no reset_resume for driver btusb?

from the kernel. See also

  https://bugzilla.kernel.org/show_bug.cgi?id=26182

for other reports.

Reported-by: Jeff Chua <jeff.chua.linux@gmail.com>
Reported-by: Andrew Meakovski <meako@bigmir.net>
Reported-by: Jim Faulkner <jfaulkne@ccs.neu.edu>
Acked-by: Greg KH <gregkh@suse.de>
Acked-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Gustavo F. Padovan <padovan@profusion.mobi>
Cc: stable@kernel.org (for 2.6.37)
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle...
Dave Airlie [Thu, 24 Feb 2011 02:19:43 +0000 (12:19 +1000)]
Merge branch 'drm-intel-fixes' of git://git./linux/kernel/git/ickle/drm-intel into drm-fixes

* 'drm-intel-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/ickle/drm-intel:
  drm/i915: fix corruptions on i8xx due to relaxed fencing
  drm/i915: skip FDI & PCH enabling for DP_A
  agp/intel: Experiment with a 855GM GWB bit
  drm/i915: don't enable FDI & transcoder interrupts after all
  drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch

13 years agodrm/i915: fix corruptions on i8xx due to relaxed fencing
Daniel Vetter [Tue, 22 Feb 2011 17:25:49 +0000 (18:25 +0100)]
drm/i915: fix corruptions on i8xx due to relaxed fencing

It looks like gen2 has a peculiar interleaved 2-row inter-tile
layout. Probably inherited from i81x which had 2kb tiles (which
naturally fit an even-number-of-tile-rows scheme to fit onto 4kb
pages). There is no other mention of this in any docs (also not
in the Intel internal documention according to Chris Wilson).

Problem manifests itself in corruptions in the second half of the
last tile row (if the bo has an odd number of tiles). Which can
only happen with relaxed tiling (introduced in a00b10c360b35d6431a9).

So reject set_tiling calls that don't satisfy this constrain to
prevent broken userspace from causing havoc. While at it, also
check the size for newer chipsets.

LKML: https://lkml.org/lkml/2011/2/19/5
Reported-by: Indan Zupancic <indan@nul.nu>
Tested-by: Indan Zupancic <indan@nul.nu>
Signed-off-by: Daniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6
Linus Torvalds [Thu, 24 Feb 2011 00:02:00 +0000 (16:02 -0800)]
Merge git://git./linux/kernel/git/davem/net-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-2.6: (33 commits)
  Added support for usb ethernet (0x0fe6, 0x9700)
  r8169: fix RTL8168DP power off issue.
  r8169: correct settings of rtl8102e.
  r8169: fix incorrect args to oob notify.
  DM9000B: Fix PHY power for network down/up
  DM9000B: Fix reg_save after spin_lock in dm9000_timeout
  net_sched: long word align struct qdisc_skb_cb data
  sfc: lower stack usage in efx_ethtool_self_test
  bridge: Use IPv6 link-local address for multicast listener queries
  bridge: Fix MLD queries' ethernet source address
  bridge: Allow mcast snooping for transient link local addresses too
  ipv6: Add IPv6 multicast address flag defines
  bridge: Add missing ntohs()s for MLDv2 report parsing
  bridge: Fix IPv6 multicast snooping by correcting offset in MLDv2 report
  bridge: Fix IPv6 multicast snooping by storing correct protocol type
  p54pci: update receive dma buffers before and after processing
  fix cfg80211_wext_siwfreq lock ordering...
  rt2x00: Fix WPA TKIP Michael MIC failures.
  ath5k: Fix fast channel switching
  tcp: undo_retrans counter fixes
  ...

13 years agoMerge branch 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied...
Linus Torvalds [Wed, 23 Feb 2011 23:51:26 +0000 (15:51 -0800)]
Merge branch 'drm-fixes' of git://git./linux/kernel/git/airlied/drm-2.6

* 'drm-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/airlied/drm-2.6:
  amd64-agp: fix crash at second module load
  drm/radeon: fix regression with AA resolve checking
  drm: drop commented out code and preceding comment
  drm/vblank: Enable precise vblank timestamps for interlaced and doublescan modes.
  drm/vblank: Use memory barriers optimized for atomic_t instead of generics.
  drm/vblank: Use abs64(diff_ns) for s64 diff_ns instead of abs(diff_ns)
  drm/radeon/kms: align height of fb allocation.
  Revert "drm/radeon/kms: switch back to min->max pll post divider iteration"

13 years agoMerge branch 'r8169-davem' of git://git.kernel.org/pub/scm/linux/kernel/git/romieu...
David S. Miller [Wed, 23 Feb 2011 23:03:11 +0000 (15:03 -0800)]
Merge branch 'r8169-davem' of git://git./linux/kernel/git/romieu/netdev-2.6

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input
Linus Torvalds [Wed, 23 Feb 2011 22:44:25 +0000 (14:44 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/dtor/input

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dtor/input:
  Input: serio/gameport - use 'long' system workqueue
  Input: synaptics - document 0x0c query
  Input: tegra-kbc - add function keymap

13 years agoMerge branch 'for-linus' of git://oss.sgi.com/xfs/xfs
Linus Torvalds [Wed, 23 Feb 2011 22:44:02 +0000 (14:44 -0800)]
Merge branch 'for-linus' of git://oss.sgi.com/xfs/xfs

* 'for-linus' of git://oss.sgi.com/xfs/xfs:
  xfs: check if device support discard in xfs_ioc_trim()
  xfs: prevent leaking uninitialized stack memory in FSGEOMETRY_V1

13 years agoAdded support for usb ethernet (0x0fe6, 0x9700)
Shahar Havivi [Tue, 22 Feb 2011 04:41:11 +0000 (04:41 +0000)]
Added support for usb ethernet (0x0fe6, 0x9700)

The device is very similar to (0x0fe6, 0x8101),
And works well with dm9601 driver.

Signed-off-by: Shahar Havivi <shaharh@redhat.com>
Acked-by: Peter Korsgaard <jacmet@sunsite.dk>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agor8169: fix RTL8168DP power off issue.
Hayes Wang [Tue, 22 Feb 2011 09:26:22 +0000 (17:26 +0800)]
r8169: fix RTL8168DP power off issue.

- fix the RTL8111DP turn off the power when DASH is enabled.
- RTL_GIGA_MAC_VER_27 must wait for tx finish before reset.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
13 years agor8169: correct settings of rtl8102e.
Hayes Wang [Tue, 22 Feb 2011 09:26:19 +0000 (17:26 +0800)]
r8169: correct settings of rtl8102e.

Adjust and remove certain settings of RTL8102E which are for previous chips.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-off-by: Francois Romieu <romieu@fr.zoreil.com>
13 years agor8169: fix incorrect args to oob notify.
Hayes Wang [Tue, 22 Feb 2011 09:26:20 +0000 (17:26 +0800)]
r8169: fix incorrect args to oob notify.

It results in the wrong point address and influences RTL8168DP.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
Acked-by: Francois Romieu <romieu@fr.zoreil.com>
13 years agoDM9000B: Fix PHY power for network down/up
Henry Nestler [Tue, 22 Feb 2011 11:29:42 +0000 (11:29 +0000)]
DM9000B: Fix PHY power for network down/up

DM9000 revision B needs 1 ms delay after PHY power-on.
PHY must be powered on by writing 0 into register DM9000_GPR before
all other settings will change (see Davicom spec and example code).

Remember, that register DM9000_GPR was not changed by reset sequence.

Without this fix the FIFO is out of sync and sends wrong data after
sequence of "ifconfig ethX down ; ifconfig ethX up".

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoDM9000B: Fix reg_save after spin_lock in dm9000_timeout
Henry Nestler [Sun, 20 Feb 2011 11:44:58 +0000 (11:44 +0000)]
DM9000B: Fix reg_save after spin_lock in dm9000_timeout

The spin_lock should hold before reading register.

Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agonet_sched: long word align struct qdisc_skb_cb data
Eric Dumazet [Wed, 23 Feb 2011 07:05:07 +0000 (07:05 +0000)]
net_sched: long word align struct qdisc_skb_cb data

netem_skb_cb() does :

return (struct netem_skb_cb *)qdisc_skb_cb(skb)->data;

Unfortunatly struct qdisc_skb_cb data is not long word aligned, so
access to psched_time_t time_to_send uses a non aligned access.

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoInput: serio/gameport - use 'long' system workqueue
Dmitry Torokhov [Wed, 23 Feb 2011 16:51:28 +0000 (08:51 -0800)]
Input: serio/gameport - use 'long' system workqueue

Commit 8ee294cd9def0004887da7f44b80563493b0a097 converted serio
subsystem event handling from using a dedicated thread to using
common workqueue. Unfortunately, this regressed our boot times,
due to the fact that serio jobs take long time to execute. While
the new concurrency managed workqueue code manages long-playing
works just fine and schedules additional workers as needed, such
works wreck havoc among remaining users of flush_scheduled_work().

To solve this problem let's move serio/gameport works from system_wq
to system_long_wq which nobody tries to flush.

Reported-and-tested-by: Hernando Torque <pantherchen@versanet.de>
Acked-by: Tejun Heo <tj@kernel.org>
Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoInput: synaptics - document 0x0c query
Dmitry Torokhov [Wed, 23 Feb 2011 04:15:07 +0000 (20:15 -0800)]
Input: synaptics - document 0x0c query

Since Synaptics technical writers department is a bit slow releasing updated
Synaptics interface guide, let's add some new bits (with their blessing)
to the code so that they don't get lost.

Signed-off-by: Dmitry Torokhov <dtor@mail.ru>
13 years agoDrop redundant __param section for CRISv32.
Jesper Nilsson [Wed, 23 Feb 2011 12:04:25 +0000 (13:04 +0100)]
Drop redundant __param section for CRISv32.

The __param section is already brought in by RODATA above.

Signed-off-by: Jesper Nilsson <jesper.nilsson@axis.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoamd64-agp: fix crash at second module load
Florian Mickler [Mon, 7 Feb 2011 22:29:31 +0000 (23:29 +0100)]
amd64-agp: fix crash at second module load

The module forgot to sometimes unregister some resources.

This fixes Bug #22882.

[Patch updated to 2.6.38-rc3 by Randy Dunlap.]
Tested-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Florian Mickler <florian@mickler.org>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agoMerge branch 'for-2639-rc4/i2c-fixes' of git://git.fluff.org/bjdooks/linux
Linus Torvalds [Wed, 23 Feb 2011 01:13:16 +0000 (17:13 -0800)]
Merge branch 'for-2639-rc4/i2c-fixes' of git://git.fluff.org/bjdooks/linux

* 'for-2639-rc4/i2c-fixes' of git://git.fluff.org/bjdooks/linux:
  i2c-omap: fixup commit cb527ede1bf6ff2008a025606f25344b8ed7b4ac whitespace
  i2c-omap: Double clear of ARDY status in IRQ handler
  i2c-omap: fix build for !CONFIG_SUSPEND
  i2c-omap: fix static suspend vs. runtime suspend
  i2c-stu300: make sure adapter-name is terminated

13 years agoMerge branch 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh...
Linus Torvalds [Wed, 23 Feb 2011 01:11:10 +0000 (17:11 -0800)]
Merge branch 'usb-linus' of git://git./linux/kernel/git/gregkh/usb-2.6

* 'usb-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb-2.6:
  Revert "USB: Reset USB 3.0 devices on (re)discovery"
  USB: musb: omap2430: fix kernel panic on reboot
  sierra: add new ID for Airprime/Sierra USB IP modem
  USB: serial/usb_wwan, fix tty NULL dereference
  USB: Reset USB 3.0 devices on (re)discovery
  USB: Add quirk for Samsung Android phone modem
  USB: Add Samsung SGH-I500/Android modem ID switch to visor driver
  USB: add quirks entry for Keytouch QWERTY Panel
  usb: musb: omap2430: fix kernel panic on reboot
  usb: musb: fix build breakage

13 years agoi2c-omap: fixup commit cb527ede1bf6ff2008a025606f25344b8ed7b4ac whitespace
Ben Dooks [Wed, 23 Feb 2011 00:43:55 +0000 (00:43 +0000)]
i2c-omap: fixup commit cb527ede1bf6ff2008a025606f25344b8ed7b4ac whitespace

Fixup the whitespace error noticed in cb527ede1bf6ff2008a025606f25344b8ed7b4ac

Signed-off-by: Ben Dooks <ben-linux@fluff.org>
13 years agoi2c-omap: Double clear of ARDY status in IRQ handler
Richard woodruff [Wed, 16 Feb 2011 04:54:16 +0000 (10:24 +0530)]
i2c-omap: Double clear of ARDY status in IRQ handler

This errata occurs when the ARDY interrupt generation is enabled.
At the begining of every new transaction the ARDY interrupt is cleared.

On continuous i2c transactions where after clearing the ARDY bit from
I2C_STAT register (clearing the interrupt), the IRQ line is reasserted and the
I2C_STAT[ARDY] bit set again on 1. In fact, the ARDY status bit is not cleared
at the write access to I2C_STAT[ARDY] and only the IRQ line is deasserted and
then reasserted. This is not captured in the usual errata documents.

The workaround is to have a double clear of ARDY status in irq handler.

Signed-off-by: Richard woodruff <r-woodruff2@ti.com>
Signed-off-by: Keerthy <j-keerthy@ti.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
13 years agoi2c-omap: fix build for !CONFIG_SUSPEND
Balaji T K [Tue, 22 Feb 2011 06:55:39 +0000 (12:25 +0530)]
i2c-omap: fix build for !CONFIG_SUSPEND

fix the build break when !CONFIG_SUSPEND

drivers/i2c/busses/i2c-omap.c:1173: error: lvalue required as unary '&' operand
make[3]: *** [drivers/i2c/busses/i2c-omap.o] Error 1
make[2]: *** [drivers/i2c/busses] Error 2
make[1]: *** [drivers/i2c] Error 2
make: *** [drivers] Error 2

Signed-off-by: Balaji T K <balajitk@ti.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
13 years agodrm/radeon: fix regression with AA resolve checking
Dave Airlie [Sun, 20 Feb 2011 21:57:32 +0000 (21:57 +0000)]
drm/radeon: fix regression with AA resolve checking

Some userspaces can emit a whole packet without disabling AA resolve
by the looks of it, so we have to deal with them.

Signed-off-by: Dave Airlie <airlied@redhat.com>
Tested-by: Jorg Otte <jrg.otte@googlemail.com>
13 years agodrm: drop commented out code and preceding comment
Paul Bolle [Sat, 19 Feb 2011 21:35:55 +0000 (22:35 +0100)]
drm: drop commented out code and preceding comment

r100_gpu_init() was dropped in 90aca4d ("drm/radeon/kms: simplify &
improve GPU reset V2") but here it was only commented out.

Signed-off-by: Paul Bolle <pebolle@tiscali.nl>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/vblank: Enable precise vblank timestamps for interlaced and doublescan modes.
Mario Kleiner [Mon, 21 Feb 2011 04:42:02 +0000 (05:42 +0100)]
drm/vblank: Enable precise vblank timestamps for interlaced and doublescan modes.

Testing showed the current code can already handle doublescan
video modes just fine. A trivial tweak makes it work for interlaced
scanout as well.

Tested and shown to be precise on Radeon rv530, r600 and
Intel 945-GME.

Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/vblank: Use memory barriers optimized for atomic_t instead of generics.
Mario Kleiner [Mon, 21 Feb 2011 04:42:01 +0000 (05:42 +0100)]
drm/vblank: Use memory barriers optimized for atomic_t instead of generics.

Documentation/atomic_ops.txt tells us that there are memory
barriers optimized for atomic_inc and other atomic_t ops.

Use these instead of smp_wmb(), and also to make the required
memory barriers around vblank counter increments more explicit.

Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/vblank: Use abs64(diff_ns) for s64 diff_ns instead of abs(diff_ns)
Mario Kleiner [Mon, 21 Feb 2011 04:42:00 +0000 (05:42 +0100)]
drm/vblank: Use abs64(diff_ns) for s64 diff_ns instead of abs(diff_ns)

Use of abs() wrongly wrapped diff_ns to 32 bit, which gives a 1/4000
probability of a missed vblank increment at each vblank irq reenable
if the kms driver doesn't support high precision vblank timestamping.
Not a big deal in practice, but let's make it nice.

Signed-off-by: Mario Kleiner <mario.kleiner@tuebingen.mpg.de>
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agodrm/radeon/kms: align height of fb allocation.
Dave Airlie [Fri, 18 Feb 2011 05:51:57 +0000 (15:51 +1000)]
drm/radeon/kms: align height of fb allocation.

this aligns the height of the fb allocation so it doesn't trip
over the size checks later when we use this from userspace to
copy the buffer at X start.

Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agoRevert "drm/radeon/kms: switch back to min->max pll post divider iteration"
Alex Deucher [Mon, 21 Feb 2011 06:11:59 +0000 (01:11 -0500)]
Revert "drm/radeon/kms: switch back to min->max pll post divider iteration"

This reverts commit a6f9761743bf35b052180f4a8bdae4d2cc0465f6.

Remove this commit as it is no longer necessary. The relevant bugs
were fixed properly in:
drm/radeon/kms: hopefully fix pll issues for real (v3)
5b40ddf888398ce4cccbf3b9d0a18d90149ed7ff
drm/radeon/kms: add missing frac fb div flag for dce4+
9f4283f49f0a96a64c5a45fe56f0f8c942885eef

This commit also broke certain ~5 Mhz modes on old arcade monitors,
so reverting this commit fixes:
https://bugzilla.kernel.org/show_bug.cgi?id=29502

Signed-off-by: Alex Deucher <alexdeucher@gmail.com>
Cc: stable@kernel.org
Signed-off-by: Dave Airlie <airlied@redhat.com>
13 years agoi2c-omap: fix static suspend vs. runtime suspend
Kevin Hilman [Fri, 28 Jan 2011 00:18:41 +0000 (16:18 -0800)]
i2c-omap: fix static suspend vs. runtime suspend

When runtime PM is enabled, each OMAP i2c device is suspended after
each i2c xfer.  However, there are two cases when the static suspend
methods must be used to ensure the devices are suspended:

1) runtime PM is disabled, either at compile time or dynamically
    via /sys/devices/.../power/control.
2) an i2c client driver uses i2c during it's suspend callback, thus
   leaving the i2c driver active (NOTE: runtime suspend transitions are
   disabled during system suspend, so i2c activity during system
   suspend will runtime resume the device, but not runtime (re)suspend it.)

Since the actual work to suspend the device is handled by the
subsytem, call the bus methods to take care of it.

NOTE: This takes care of a known suspend problem on OMAP3 where the
TWL RTC driver does i2c xfers during its suspend path leaving the i2c
driver in an active state (since runtime suspend transistions are
disabled.)

Signed-off-by: Kevin Hilman <khilman@ti.com>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
13 years agoi2c-stu300: make sure adapter-name is terminated
Wolfram Sang [Mon, 31 Jan 2011 14:09:23 +0000 (15:09 +0100)]
i2c-stu300: make sure adapter-name is terminated

Use strlcpy instead of strncpy.

Signed-off-by: Wolfram Sang <w.sang@pengutronix.de>
Cc: Linus Walleij <linus.walleij@stericsson.com>
Cc: Ben Dooks <ben-linux@fluff.org>
Signed-off-by: Ben Dooks <ben-linux@fluff.org>
13 years agoxfs: check if device support discard in xfs_ioc_trim()
Lukas Czerner [Tue, 15 Feb 2011 17:07:36 +0000 (17:07 +0000)]
xfs: check if device support discard in xfs_ioc_trim()

Right now we, are relying on the fact that when we attempt to
actually do the discard, blkdev_issue_discar() returns -EOPNOTSUPP
and the user is informed that the device does not support discard.

However, in the case where the we do not hit any suitable free
extent to trim in FITRIM code, it will finish without any error.
This is very confusing, because it seems that FITRIM was successful
even though the device does not actually supports discard.

Solution: Check for the discard support before attempt to search for
free extents.

Signed-off-by: Lukas Czerner <lczerner@redhat.com>
Signed-off-by: Alex Elder <aelder@sgi.com>
13 years agoxfs: prevent leaking uninitialized stack memory in FSGEOMETRY_V1
Dan Rosenberg [Mon, 14 Feb 2011 13:45:28 +0000 (13:45 +0000)]
xfs: prevent leaking uninitialized stack memory in FSGEOMETRY_V1

The FSGEOMETRY_V1 ioctl (and its compat equivalent) calls out to
xfs_fs_geometry() with a version number of 3.  This code path does not
fill in the logsunit member of the passed xfs_fsop_geom_t, leading to
the leaking of four bytes of uninitialized stack data to potentially
unprivileged callers.

v2 switches to memset() to avoid future issues if structure members
change, on suggestion of Dave Chinner.

Signed-off-by: Dan Rosenberg <drosenberg@vsecurity.com>
Reviewed-by: Eugene Teo <eugeneteo@kernel.org>
Signed-off-by: Alex Elder <aelder@sgi.com>
13 years agoMerge branch 'master' of git://git.kernel.org/pub/scm/linux/kernel/git/linville/wirel...
David S. Miller [Tue, 22 Feb 2011 19:53:05 +0000 (11:53 -0800)]
Merge branch 'master' of git://git./linux/kernel/git/linville/wireless-2.6

13 years agosfc: lower stack usage in efx_ethtool_self_test
Eric Dumazet [Wed, 16 Feb 2011 03:48:38 +0000 (03:48 +0000)]
sfc: lower stack usage in efx_ethtool_self_test

drivers/net/sfc/ethtool.c: In function ‘efx_ethtool_self_test’:
drivers/net/sfc/ethtool.c:613: warning: the frame size of 1200 bytes
is larger than 1024 bytes

Signed-off-by: Eric Dumazet <eric.dumazet@gmail.com>
Acked-by: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobridge: Use IPv6 link-local address for multicast listener queries
Linus Lüssing [Thu, 17 Feb 2011 08:17:52 +0000 (08:17 +0000)]
bridge: Use IPv6 link-local address for multicast listener queries

Currently the bridge multicast snooping feature periodically issues
IPv6 general multicast listener queries to sense the absence of a
listener.

For this, it uses :: as its source address - however RFC 2710 requires:
"To be valid, the Query message MUST come from a link-local IPv6 Source
Address". Current Linux kernel versions seem to follow this requirement
and ignore our bogus MLD queries.

With this commit a link local address from the bridge interface is being
used to issue the MLD query, resulting in other Linux devices which are
multicast listeners in the network to respond with a MLD response (which
was not the case before).

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobridge: Fix MLD queries' ethernet source address
Linus Lüssing [Thu, 17 Feb 2011 08:17:51 +0000 (08:17 +0000)]
bridge: Fix MLD queries' ethernet source address

Map the IPv6 header's destination multicast address to an ethernet
source address instead of the MLD queries multicast address.

For instance for a general MLD query (multicast address in the MLD query
set to ::), this would wrongly be mapped to 33:33:00:00:00:00, although
an MLD queries destination MAC should always be 33:33:00:00:00:01 which
matches the IPv6 header's multicast destination ff02::1.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobridge: Allow mcast snooping for transient link local addresses too
Linus Lüssing [Tue, 15 Feb 2011 13:19:21 +0000 (13:19 +0000)]
bridge: Allow mcast snooping for transient link local addresses too

Currently the multicast bridge snooping support is not active for
link local multicast. I assume this has been done to leave
important multicast data untouched, like IPv6 Neighborhood Discovery.

In larger, bridged, local networks it could however be desirable to
optimize for instance local multicast audio/video streaming too.

With the transient flag in IPv6 multicast addresses we have an easy
way to optimize such multimedia traffic without tempering with the
high priority multicast data from well-known addresses.

This patch alters the multicast bridge snooping for IPv6, to take
effect for transient multicast addresses instead of non-link-local
addresses.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoipv6: Add IPv6 multicast address flag defines
Linus Lüssing [Tue, 15 Feb 2011 13:19:20 +0000 (13:19 +0000)]
ipv6: Add IPv6 multicast address flag defines

This commit adds the missing IPv6 multicast address flag defines to
complement the already existing multicast address scope defines and to
be able to check these flags nicely in the future.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobridge: Add missing ntohs()s for MLDv2 report parsing
Linus Lüssing [Tue, 15 Feb 2011 13:19:19 +0000 (13:19 +0000)]
bridge: Add missing ntohs()s for MLDv2 report parsing

The nsrcs number is 2 Byte wide, therefore we need to call ntohs()
before using it.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobridge: Fix IPv6 multicast snooping by correcting offset in MLDv2 report
Linus Lüssing [Tue, 15 Feb 2011 13:19:18 +0000 (13:19 +0000)]
bridge: Fix IPv6 multicast snooping by correcting offset in MLDv2 report

We actually want a pointer to the grec_nsrcr and not the following
field. Otherwise we can get very high values for *nsrcs as the first two
bytes of the IPv6 multicast address are being used instead, leading to
a failing pskb_may_pull() which results in MLDv2 reports not being
parsed.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agobridge: Fix IPv6 multicast snooping by storing correct protocol type
Linus Lüssing [Tue, 15 Feb 2011 13:19:17 +0000 (13:19 +0000)]
bridge: Fix IPv6 multicast snooping by storing correct protocol type

The protocol type for IPv6 entries in the hash table for multicast
bridge snooping is falsely set to ETH_P_IP, marking it as an IPv4
address, instead of setting it to ETH_P_IPV6, which results in negative
look-ups in the hash table later.

Signed-off-by: Linus Lüssing <linus.luessing@web.de>
Signed-off-by: David S. Miller <davem@davemloft.net>
13 years agoMerge branch 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6
Linus Torvalds [Tue, 22 Feb 2011 17:26:54 +0000 (09:26 -0800)]
Merge branch 'urgent' of git://git./linux/kernel/git/brodo/pcmcia-2.6

* 'urgent' of git://git.kernel.org/pub/scm/linux/kernel/git/brodo/pcmcia-2.6:
  pcmcia: re-enable Zoomed Video support
  cm4000_cs: Fix undefined ops warning
  pcmcia vs. MECR on pxa25x/sa1111
  drivers/char/pcmcia/ipwireless/main.c: Convert release_resource to release_region/release_mem_region

13 years agoMerge branch 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Tue, 22 Feb 2011 17:26:17 +0000 (09:26 -0800)]
Merge branch 'irq-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'irq-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  genirq: Disable the SHIRQ_DEBUG call in request_threaded_irq for now
  genirq: Prevent access beyond allocated_irqs bitmap

13 years agoMerge branch 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel...
Linus Torvalds [Tue, 22 Feb 2011 17:25:55 +0000 (09:25 -0800)]
Merge branch 'perf-fixes-for-linus' of git://git./linux/kernel/git/tip/linux-2.6-tip

* 'perf-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/linux-2.6-tip:
  perf: Fix throttle logic
  perf, x86: P4 PMU: Fix spurious NMI messages

13 years agoMerge branch 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6
Linus Torvalds [Tue, 22 Feb 2011 16:20:02 +0000 (08:20 -0800)]
Merge branch 'fix/asoc' of git://git./linux/kernel/git/tiwai/sound-2.6

* 'fix/asoc' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound-2.6:
  ASoC: Ensure supplies are maintained for force enabled widgets
  ASoC: WM8994: Improve playback robustness
  ASoC: WM8994: Improve robustness in some use cases
  ASoC: WM8903: Fix mic detection enable logic
  ASoC: WM8903: Fix mic detection register definitions
  ASoC: CX20442: fix wrong reg_cache_default content
  ASoC: Sync initial widget state with hardware

13 years ago.gitignore: ignore *.xz files
Romain Francoise [Tue, 22 Feb 2011 09:48:06 +0000 (10:48 +0100)]
.gitignore: ignore *.xz files

Building with CONFIG_KERNEL_XZ results in the following:

 # Untracked files:
 #   (use "git add <file>..." to include in what will be committed)
 #
 #       arch/x86/boot/compressed/vmlinux.bin.xz

So ignore xz-compressed files at the top level like we already do for
other compression types.

Signed-off-by: Romain Francoise <romain@orebokech.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agodrm/i915: skip FDI & PCH enabling for DP_A
Jesse Barnes [Tue, 15 Feb 2011 23:08:02 +0000 (15:08 -0800)]
drm/i915: skip FDI & PCH enabling for DP_A

eDP on the CPU doesn't need the PCH set up at all, it can in fact cause
problems.  So avoid FDI training and PCH PLL enabling in that case.

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Tested-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
13 years agoagp/intel: Experiment with a 855GM GWB bit
Chris Wilson [Wed, 22 Dec 2010 11:37:09 +0000 (11:37 +0000)]
agp/intel: Experiment with a 855GM GWB bit

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=27187
Tested-by: Thorsten Vollmer <thorsten@thvo.de> (DFI-ACP G5M150-N w/852GME)
Tested-by: Moritz Brunner <2points@gmx.org> (Asus M2400N/i855GM)
Tested-by: Indan Zupancic <indan@nul.nu> (Thinkpad X40/855GM rev 02)
Tested-by: Eric Anholt <eric@anholt.net> (865G)
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
13 years agodrm/i915: don't enable FDI & transcoder interrupts after all
Jesse Barnes [Fri, 11 Feb 2011 22:44:51 +0000 (14:44 -0800)]
drm/i915: don't enable FDI & transcoder interrupts after all

We can enable some safely, but FDI and transcoder interrupts can occur
and block other interrupts from being detected (like port hotplug
events).  So keep them disabled by default (they can be re-enabled for
debugging display bringup, but should generally be off).

Signed-off-by: Jesse Barnes <jbarnes@virtuousgeek.org>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
13 years agodrm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch
Chris Wilson [Fri, 11 Feb 2011 20:47:45 +0000 (20:47 +0000)]
drm/i915: Ignore a hung GPU when flushing the framebuffer prior to a switch

If the gpu is hung, then whatever was inside the render cache is lost
and there is little point waiting for it. Or complaining if we see an
EIO or EAGAIN instead. So, if the GPU is indeed in its death throes when
we need to rewrite the registers for a new framebuffer, just ignore the
error and proceed with the update.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
13 years agoKVM: SVM: Advance instruction pointer in dr_intercept
Joerg Roedel [Wed, 9 Feb 2011 17:29:39 +0000 (18:29 +0100)]
KVM: SVM: Advance instruction pointer in dr_intercept

In the dr_intercept function a new cpu-feature called
decode-assists is implemented and used when available. This
code-path does not advance the guest-rip causing the guest
to dead-loop over mov-dr instructions. This is fixed by this
patch.

Signed-off-by: Joerg Roedel <joerg.roedel@amd.com>
Signed-off-by: Avi Kivity <avi@redhat.com>
13 years agoLinux 2.6.38-rc6
Linus Torvalds [Tue, 22 Feb 2011 01:25:52 +0000 (17:25 -0800)]
Linux 2.6.38-rc6

13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs...
Linus Torvalds [Tue, 22 Feb 2011 01:25:00 +0000 (17:25 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/ecryptfs/ecryptfs-2.6

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ecryptfs/ecryptfs-2.6:
  eCryptfs: Copy up lower inode attrs in getattr
  ecryptfs: read on a directory should return EISDIR if not supported
  eCryptfs: Handle NULL nameidata pointers
  eCryptfs: Revert "dont call lookup_one_len to avoid NULL nameidata"

13 years agodrm/i915: Do not handle backlight combination mode specially
Indan Zupancic [Thu, 17 Feb 2011 01:41:49 +0000 (02:41 +0100)]
drm/i915: Do not handle backlight combination mode specially

The current code does not follow Intel documentation: It misses some things
and does other, undocumented things. This causes wrong backlight values in
certain conditions. Instead of adding tricky code handling badly documented
and rare corner cases, don't handle combination mode specially at all. This
way PCI_LBPC is never touched and weird things shouldn't happen.

If combination mode is enabled, then the only downside is that changing the
brightness has a greater granularity (the LBPC value), but LBPC is at most
254 and the maximum is in the thousands, so this is no real functional loss.

A potential problem with not handling combined mode is that a brightness of
max * PCI_LBPC is not bright enough. However, this is very unlikely because
from the documentation LBPC seems to act as a scaling factor and doesn't look
like it's supposed to be changed after boot. The value at boot should always
result in a bright enough screen.

IMPORTANT: However, although usually the above is true, it may not be when
people ran an older (2.6.37) kernel which messed up the LBPC register, and
they are unlucky enough to have a BIOS that saves and restores the LBPC value.
Then a good kernel may seem to not work: Max brightness isn't bright enough.
If this happens people should boot back into the old kernel, set brightness
to the maximum, and then reboot. After that everything should be fine.

For more information see the below links. This fixes bugs:

  http://bugzilla.kernel.org/show_bug.cgi?id=23472
  http://bugzilla.kernel.org/show_bug.cgi?id=25072

Signed-off-by: Indan Zupancic <indan@nul.nu>
Tested-by: Alex Riesen <raa.lkml@gmail.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agomodule: explicitly align module_version_attribute structure
Dmitry Torokhov [Fri, 4 Feb 2011 21:30:10 +0000 (13:30 -0800)]
module: explicitly align module_version_attribute structure

We force particular alignment when we generate attribute structures
when generation MODULE_VERSION() data and we need to make sure that
this alignment is followed when we iterate over these structures,
otherwise we may crash on platforms whose natural alignment is not
sizeof(void *), such as m68k.

Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: Dmitry Torokhov <dtor@vmware.com>
[ There are more issues here, but the fixes are incredibly ugly - Linus ]
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platf...
Linus Torvalds [Mon, 21 Feb 2011 23:08:33 +0000 (15:08 -0800)]
Merge branch 'for_linus' of git://git./linux/kernel/git/mjg59/platform-drivers-x86

* 'for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mjg59/platform-drivers-x86:
  dell-laptop: Toggle the unsupported hardware killswitch
  thinkpad_acpi: Always report scancodes for hotkeys
  acer-wmi: Fix capitalisation of GUID
  platform/x86: ideapad-laptop depends on INPUT
  platform: x86: acer-wmi: world-writable sysfs threeg file
  platform: x86: asus_acpi: world-writable procfs files
  platform: x86: tc1100-wmi: world-writable sysfs wireless and jogdial files
  platform-drivers: x86: pmic: Use request_irq instead of chained handler
  platform-drivers: x86: pmic: Use irq_chip buslock mechanism
  platform-drivers: x86: Convert pmic to new irq_chip functions
  platform-drivers: x86: pmic: Fix up bogus irq hackery

13 years agoMerge branch 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuil...
Linus Torvalds [Mon, 21 Feb 2011 23:08:09 +0000 (15:08 -0800)]
Merge branch 'rc-fixes' of git://git./linux/kernel/git/mmarek/kbuild-2.6

* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild-2.6:
  fixdep: Do not record dependency on the source file itself

13 years agoDocbook: add fs/eventfd.c and fix typos in it
Randy Dunlap [Mon, 21 Feb 2011 04:08:35 +0000 (20:08 -0800)]
Docbook: add fs/eventfd.c and fix typos in it

Add fs/eventfd.c to filesystems docbook.
Make typo corrections in fs/eventfd.c.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: Davide Libenzi <davidel@xmailserver.org>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoDocumentation: log_buf_len uses [KMG] suffix
Randy Dunlap [Mon, 21 Feb 2011 04:08:35 +0000 (20:08 -0800)]
Documentation: log_buf_len uses [KMG] suffix

Update the "log_buf_len" description to use [KMG] syntax for the
buffer size.

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoDocumentation: explain [KMG] parameter suffix
Ahmed S. Darwish [Mon, 21 Feb 2011 04:08:35 +0000 (20:08 -0800)]
Documentation: explain [KMG] parameter suffix

The '[KMG]' suffix is commonly described after a number of kernel
parameter values documentation.  Explicitly state its semantics.

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoDocumentation: complete crashkernel= parameter documentation
Ahmed S. Darwish [Mon, 21 Feb 2011 04:08:35 +0000 (20:08 -0800)]
Documentation: complete crashkernel= parameter documentation

Complete the crashkernel= kernel parameter documentation.

Signed-off-by: Ahmed S. Darwish <darwish.07@gmail.com>
Acked-by: Simon Horman <horms@verge.net.au>
Acked-by: Vivek Goyal <vgoyal@redhat.com>
Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Signed-off-by: Linus Torvalds <torvalds@linux-foundation.org>
13 years agoMerge branch 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph...
Linus Torvalds [Mon, 21 Feb 2011 23:01:38 +0000 (15:01 -0800)]
Merge branch 'for-linus' of git://git./linux/kernel/git/sage/ceph-client

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/sage/ceph-client:
  ceph: keep reference to parent inode on ceph_dentry
  ceph: queue cap_snaps once per realm
  libceph: fix socket write error handling
  libceph: fix socket read error handling

13 years agoMerge branch 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git...
Linus Torvalds [Mon, 21 Feb 2011 23:00:47 +0000 (15:00 -0800)]
Merge branch 's5p-fixes-for-linus' of git://git./linux/kernel/git/kgene/linux-samsung

* 's5p-fixes-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/kgene/linux-samsung:
  ARM: S5PV210: Fix regulator names
  ARM: S5PV210: Update max8998_platform_data
  ARM: SAMSUNG: Drop exporting s3c24xx_ts_set_platdata
  ARM: S5P: Fix end address in memory resource information for UART devices
  ARM: S5P64X0: Cleanup map.h file
  ARM: S5P6442: Cleanup map.h file
  ARM: S5PC100: Clenaup map.h file
  ARM: S5PV210: Cleanup map.h file
  ARM: S5PV310: Cleanup map.h file

13 years agoMerge git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6
Linus Torvalds [Mon, 21 Feb 2011 22:57:39 +0000 (14:57 -0800)]
Merge git://git./linux/kernel/git/sfrench/cifs-2.6

* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6:
  [CIFS] update cifs version
  cifs: Fix regression in LANMAN (LM) auth code
  cifs: fix handling of scopeid in cifs_convert_address

13 years agoMerge branch 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm
Linus Torvalds [Mon, 21 Feb 2011 22:57:04 +0000 (14:57 -0800)]
Merge branch 'fixes' of /home/rmk/linux-2.6-arm

* 'fixes' of master.kernel.org:/home/rmk/linux-2.6-arm:
  ARM: 6745/1: kprobes insn decoding fix
  ARM: tlb: move noMMU tlb_flush() to asm/tlb.h
  ARM: tlb: delay page freeing for SMP and ARMv7 CPUs
  ARM: Keep exit text/data around for SMP_ON_UP
  ARM: Ensure predictable endian state on signal handler entry
  ARM: 6740/1: Place correctly notes section in the linker script
  ARM: 6700/1: SPEAr: Correct SOC config base address for spear320
  ARM: 6722/1: SPEAr: sp810: switch to slow mode before reset
  ARM: 6712/1: SPEAr: replace readl(), writel() with relaxed versions in uncompress.h
  ARM: 6720/1: SPEAr: Append UL to VMALLOC_END
  ARM: 6676/1: Correct the cpu_architecture() function for ARMv7
  ARM: 6739/1: update .gitignore for boot/compressed
  ARM: 6743/1: errata: interrupted ICALLUIS may prevent completion of broadcasted operation
  ARM: 6742/1: pmu: avoid setting IRQ affinity on UP systems
  ARM: 6741/1: errata: pl310 cache sync operation may be faulty

13 years agoMerge branch 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6
Linus Torvalds [Mon, 21 Feb 2011 22:55:49 +0000 (14:55 -0800)]
Merge branch 'for-linus' of git://git390.marist.edu/linux-2.6

* 'for-linus' of git://git390.marist.edu/pub/scm/linux-2.6:
  [S390] net: provide architecture specific NET_SKB_PAD
  [S390] atomic: use inline asm
  [S390] correct ipl parameter block safe guard
  [S390] atomic: use ACCESS_ONCE() for atomic_read()
  [S390] dasd: correct device table

13 years ago[CIFS] update cifs version
Steve French [Mon, 21 Feb 2011 22:31:47 +0000 (22:31 +0000)]
[CIFS] update cifs version

Update version to 1.71 so we can more easily spot modules with the last two fixes

Signed-off-by: Steve French <sfrench@us.ibm.com>
13 years agodell-laptop: Toggle the unsupported hardware killswitch
Keng-Yu Lin [Tue, 15 Feb 2011 09:36:07 +0000 (17:36 +0800)]
dell-laptop: Toggle the unsupported hardware killswitch

It is found on Dell Inspiron 1018 that the firmware reports that the hardware
killswitch is not supported. This makes the rfkill key not functional.

This patch forces the driver to toggle the firmware rfkill status in the case
that the hardware killswitch is indicated as unsupported by the firmware.

Signed-off-by: Keng-Yu Lin <keng-yu.lin@canonical.com>
Tested-by: Alessio Igor Bogani <abogani@texware.it>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agothinkpad_acpi: Always report scancodes for hotkeys
Seth Forshee [Fri, 14 Jan 2011 21:54:39 +0000 (15:54 -0600)]
thinkpad_acpi: Always report scancodes for hotkeys

Some thinkpad hotkeys report key codes like KEY_FN_F8 when something
like KEY_VOLUMEDOWN is desired. Always provide the scan codes in
addition to the key codes to assist with debugging these issues. Also
send the scan code before the key code to match what other drivers do,
as some userspace utilities expect this ordering.

Signed-off-by: Seth Forshee <seth.forshee@canonical.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoacer-wmi: Fix capitalisation of GUID
Matthew Garrett [Wed, 9 Feb 2011 21:39:40 +0000 (16:39 -0500)]
acer-wmi: Fix capitalisation of GUID

6AF4F258-B401-42fd-BE91-3D4AC2D7C0D3 needs to be
6AF4F258-B401-42FD-BE91-3D4AC2D7C0D3 to match the hardware alias.

Signed-off-by: Matthew Garrett <mjg@redhat.com>
Acked-by: Carlos Corbacho <carlos@strangeworlds.co.uk>
Cc: stable@kernel.org
13 years agoplatform/x86: ideapad-laptop depends on INPUT
Randy Dunlap [Thu, 20 Jan 2011 20:48:36 +0000 (12:48 -0800)]
platform/x86: ideapad-laptop depends on INPUT

Most platform/x86 drivers that use INPUT_SPARSEKMAP also depend on INPUT,
so do the same for ideapad-laptop.  This fixes a kconfig warning and
subsequent build errors when CONFIG_INPUT is disabled.

warning: (ACER_WMI && ASUS_LAPTOP && DELL_WMI && HP_WMI && PANASONIC_LAPTOP && IDEAPAD_LAPTOP && EEEPC_LAPTOP && EEEPC_WMI && MSI_WMI && TOPSTAR_LAPTOP && ACPI_TOSHIBA) selects INPUT_SPARSEKMAP which has unmet direct dependencies (!S390 && INPUT)

ERROR: "input_free_device" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "input_register_device" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "sparse_keymap_setup" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "input_allocate_device" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "input_unregister_device" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "sparse_keymap_free" [drivers/platform/x86/ideapad-laptop.ko] undefined!
ERROR: "sparse_keymap_report_event" [drivers/platform/x86/ideapad-laptop.ko] undefined!

Signed-off-by: Randy Dunlap <randy.dunlap@oracle.com>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: platform-driver-x86@vger.kernel.org
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoplatform: x86: acer-wmi: world-writable sysfs threeg file
Vasiliy Kulikov [Fri, 4 Feb 2011 12:23:56 +0000 (15:23 +0300)]
platform: x86: acer-wmi: world-writable sysfs threeg file

Don't allow everybody to write to hardware registers.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoplatform: x86: asus_acpi: world-writable procfs files
Vasiliy Kulikov [Fri, 4 Feb 2011 12:23:59 +0000 (15:23 +0300)]
platform: x86: asus_acpi: world-writable procfs files

Don't allow everybody to change ACPI settings.  The comment says that it
is done deliberatelly, however, the comment before disp_proc_write()
says that at least one of these setting is experimental.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoplatform: x86: tc1100-wmi: world-writable sysfs wireless and jogdial files
Vasiliy Kulikov [Fri, 4 Feb 2011 12:24:03 +0000 (15:24 +0300)]
platform: x86: tc1100-wmi: world-writable sysfs wireless and jogdial files

Don't allow everybody to change WMI settings.

Signed-off-by: Vasiliy Kulikov <segoon@openwall.com>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
13 years agoplatform-drivers: x86: pmic: Use request_irq instead of chained handler
Thomas Gleixner [Mon, 7 Feb 2011 20:41:30 +0000 (21:41 +0100)]
platform-drivers: x86: pmic: Use request_irq instead of chained handler

There is no need to install a chained handler for this hardware. This
is a plain x86 IOAPIC interrupt which is handled by the core code
perfectly fine. There is nothing special about demultiplexing these
gpio interrupts which justifies a custom hack. Replace it by a plain
old interrupt handler installed with request_irq. That makes the code
agnostic about the underlying primary interrupt hardware. The overhead
for this is minimal, but it gives us the advantage of accounting,
balancing and to detect interrupt storms. gpio interrupts are not
really that performance critical.

Patch fixups from akpm

Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Matthew Garrett <mjg@redhat.com>
Signed-off-by: Andrew Morton <akpm@linux-foundation.org>
13 years agocifs: Fix regression in LANMAN (LM) auth code
Shirish Pargaonkar [Thu, 17 Feb 2011 20:38:31 +0000 (14:38 -0600)]
cifs: Fix regression in LANMAN (LM) auth code

LANMAN response length was changed to 16 bytes instead of 24 bytes.
Revert it back to 24 bytes.

Signed-off-by: Shirish Pargaonkar <shirishpargaonkar@gmail.com>
CC: stable@kernel.org
Signed-off-by: Steve French <sfrench@us.ibm.com>
13 years agoeCryptfs: Copy up lower inode attrs in getattr
Tyler Hicks [Tue, 11 Jan 2011 18:43:42 +0000 (12:43 -0600)]
eCryptfs: Copy up lower inode attrs in getattr

The lower filesystem may do some type of inode revalidation during a
getattr call. eCryptfs should take advantage of that by copying the
lower inode attributes to the eCryptfs inode after a call to
vfs_getattr() on the lower inode.

I originally wrote this fix while working on eCryptfs on nfsv3 support,
but discovered it also fixed an eCryptfs on ext4 nanosecond timestamp
bug that was reported.

https://bugs.launchpad.net/bugs/613873

Cc: <stable@kernel.org>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
13 years agoecryptfs: read on a directory should return EISDIR if not supported
Andy Whitcroft [Wed, 16 Feb 2011 04:49:59 +0000 (04:49 +0000)]
ecryptfs: read on a directory should return EISDIR if not supported

read() calls against a file descriptor connected to a directory are
incorrectly returning EINVAL rather than EISDIR:

  [EISDIR]
    [XSI] [Option Start] The fildes argument refers to a directory and the
    implementation does not allow the directory to be read using read()
    or pread(). The readdir() function should be used instead. [Option End]

This occurs because we do not have a .read operation defined for
ecryptfs directories.  Connect this up to generic_read_dir().

BugLink: http://bugs.launchpad.net/bugs/719691
Signed-off-by: Andy Whitcroft <apw@canonical.com>
Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
13 years agoeCryptfs: Handle NULL nameidata pointers
Tyler Hicks [Thu, 17 Feb 2011 23:35:20 +0000 (17:35 -0600)]
eCryptfs: Handle NULL nameidata pointers

Allow for NULL nameidata pointers in eCryptfs create, lookup, and
d_revalidate functions.

Signed-off-by: Tyler Hicks <tyhicks@linux.vnet.ibm.com>
13 years agop54pci: update receive dma buffers before and after processing
Christian Lamparter [Fri, 11 Feb 2011 00:48:42 +0000 (01:48 +0100)]
p54pci: update receive dma buffers before and after processing

Documentation/DMA-API-HOWTO.txt states:

"DMA transfers need to be synced properly in order for
the cpu and device to see the most uptodate and correct
copy of the DMA buffer."

Cc: <stable@kernel.org>
Signed-off-by: Christian Lamparter <chunkeey@googlemail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agofix cfg80211_wext_siwfreq lock ordering...
Daniel J Blueman [Mon, 21 Feb 2011 16:11:06 +0000 (00:11 +0800)]
fix cfg80211_wext_siwfreq lock ordering...

I previously managed to reproduce a hang while scanning wireless
channels (reproducible with airodump-ng hopping channels); subsequent
lockdep instrumentation revealed a lock ordering issue.

Without knowing the design intent, it looks like the locks should be
taken in reverse order; please comment.

=======================================================
[ INFO: possible circular locking dependency detected ]
2.6.38-rc5-341cd #4
-------------------------------------------------------
airodump-ng/15445 is trying to acquire lock:
 (&rdev->devlist_mtx){+.+.+.}, at: [<ffffffff816b1266>]
cfg80211_wext_siwfreq+0xc6/0x100

but task is already holding lock:
 (&wdev->mtx){+.+.+.}, at: [<ffffffff816b125c>] cfg80211_wext_siwfreq+0xbc/0x100

which lock already depends on the new lock.

the existing dependency chain (in reverse order) is:

-> #1 (&wdev->mtx){+.+.+.}:
       [<ffffffff810a79d6>] lock_acquire+0xc6/0x280
       [<ffffffff816d6bce>] mutex_lock_nested+0x6e/0x4b0
       [<ffffffff81696080>] cfg80211_netdev_notifier_call+0x430/0x5f0
       [<ffffffff8109351b>] notifier_call_chain+0x8b/0x100
       [<ffffffff810935b1>] raw_notifier_call_chain+0x11/0x20
       [<ffffffff81576d92>] call_netdevice_notifiers+0x32/0x60
       [<ffffffff815771a4>] __dev_notify_flags+0x34/0x80
       [<ffffffff81577230>] dev_change_flags+0x40/0x70
       [<ffffffff8158587c>] do_setlink+0x1fc/0x8d0
       [<ffffffff81586042>] rtnl_setlink+0xf2/0x140
       [<ffffffff81586923>] rtnetlink_rcv_msg+0x163/0x270
       [<ffffffff8159d741>] netlink_rcv_skb+0xa1/0xd0
       [<ffffffff815867b0>] rtnetlink_rcv+0x20/0x30
       [<ffffffff8159d39a>] netlink_unicast+0x2ba/0x300
       [<ffffffff8159dd57>] netlink_sendmsg+0x267/0x3e0
       [<ffffffff8155e364>] sock_sendmsg+0xe4/0x110
       [<ffffffff8155f3a3>] sys_sendmsg+0x253/0x3b0
       [<ffffffff81003192>] system_call_fastpath+0x16/0x1b

-> #0 (&rdev->devlist_mtx){+.+.+.}:
       [<ffffffff810a7222>] __lock_acquire+0x1622/0x1d10
       [<ffffffff810a79d6>] lock_acquire+0xc6/0x280
       [<ffffffff816d6bce>] mutex_lock_nested+0x6e/0x4b0
       [<ffffffff816b1266>] cfg80211_wext_siwfreq+0xc6/0x100
       [<ffffffff816b2fad>] ioctl_standard_call+0x5d/0xd0
       [<ffffffff816b3223>] T.808+0x163/0x170
       [<ffffffff816b326a>] wext_handle_ioctl+0x3a/0x90
       [<ffffffff815798d2>] dev_ioctl+0x6f2/0x830
       [<ffffffff8155cf3d>] sock_ioctl+0xfd/0x290
       [<ffffffff8117dffd>] do_vfs_ioctl+0x9d/0x590
       [<ffffffff8117e53a>] sys_ioctl+0x4a/0x80
       [<ffffffff81003192>] system_call_fastpath+0x16/0x1b

other info that might help us debug this:

2 locks held by airodump-ng/15445:
 #0:  (rtnl_mutex){+.+.+.}, at: [<ffffffff81586782>] rtnl_lock+0x12/0x20
 #1:  (&wdev->mtx){+.+.+.}, at: [<ffffffff816b125c>]
cfg80211_wext_siwfreq+0xbc/0x100

stack backtrace:
Pid: 15445, comm: airodump-ng Not tainted 2.6.38-rc5-341cd #4
Call Trace:
 [<ffffffff810a3f0a>] ? print_circular_bug+0xfa/0x100
 [<ffffffff810a7222>] ? __lock_acquire+0x1622/0x1d10
 [<ffffffff810a1f99>] ? trace_hardirqs_off_caller+0x29/0xc0
 [<ffffffff810a79d6>] ? lock_acquire+0xc6/0x280
 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100
 [<ffffffff810a31d7>] ? mark_held_locks+0x67/0x90
 [<ffffffff816d6bce>] ? mutex_lock_nested+0x6e/0x4b0
 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100
 [<ffffffff810a31d7>] ? mark_held_locks+0x67/0x90
 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100
 [<ffffffff816b1266>] ? cfg80211_wext_siwfreq+0xc6/0x100
 [<ffffffff816b2fad>] ? ioctl_standard_call+0x5d/0xd0
 [<ffffffff8157818b>] ? __dev_get_by_name+0x9b/0xc0
 [<ffffffff816b2f50>] ? ioctl_standard_call+0x0/0xd0
 [<ffffffff816b3223>] ? T.808+0x163/0x170
 [<ffffffff8112ddf2>] ? might_fault+0x72/0xd0
 [<ffffffff816b326a>] ? wext_handle_ioctl+0x3a/0x90
 [<ffffffff8112de3b>] ? might_fault+0xbb/0xd0
 [<ffffffff815798d2>] ? dev_ioctl+0x6f2/0x830
 [<ffffffff810a1bae>] ? put_lock_stats+0xe/0x40
 [<ffffffff810a1c8c>] ? lock_release_holdtime+0xac/0x150
 [<ffffffff8155cf3d>] ? sock_ioctl+0xfd/0x290
 [<ffffffff8117dffd>] ? do_vfs_ioctl+0x9d/0x590
 [<ffffffff8116c8ff>] ? fget_light+0x1df/0x3c0
 [<ffffffff8117e53a>] ? sys_ioctl+0x4a/0x80
 [<ffffffff81003192>] ? system_call_fastpath+0x16/0x1b

Signed-off-by: Daniel J Blueman <daniel.blueman@gmail.com>
Acked-by: Johannes Berg <johannes@sipsolutions.net>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agort2x00: Fix WPA TKIP Michael MIC failures.
Gertjan van Wingerde [Sun, 30 Jan 2011 12:22:41 +0000 (13:22 +0100)]
rt2x00: Fix WPA TKIP Michael MIC failures.

As reported and found by Johannes Stezenbach:
rt2800{pci,usb} do not report the Michael MIC in RXed frames, but do check
the Michael MIC in hardware. Therefore we have to report to mac80211 that the
received frame does not include the Michael MIC.

https://bugzilla.kernel.org/show_bug.cgi?id=16608

Signed-off-by: Gertjan van Wingerde <gwingerde@gmail.com>
Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agoath5k: Fix fast channel switching
Nick Kossifidis [Thu, 3 Feb 2011 23:41:02 +0000 (01:41 +0200)]
ath5k: Fix fast channel switching

Fast channel change fixes:

a) Always set OFDM timings
b) Don't re-activate PHY
c) Enable only NF calibration, not AGC

https://bugzilla.kernel.org/show_bug.cgi?id=27382

Signed-off-by: Nick Kossifidis <mickflemm@gmail.com>
Signed-off-by: John W. Linville <linville@tuxdriver.com>
13 years agotcp: undo_retrans counter fixes
Yuchung Cheng [Mon, 7 Feb 2011 12:57:04 +0000 (12:57 +0000)]
tcp: undo_retrans counter fixes

Fix a bug that undo_retrans is incorrectly decremented when undo_marker is
not set or undo_retrans is already 0. This happens when sender receives
more DSACK ACKs than packets retransmitted during the current
undo phase. This may also happen when sender receives DSACK after
the undo operation is completed or cancelled.

Fix another bug that undo_retrans is incorrectly incremented when
sender retransmits an skb and tcp_skb_pcount(skb) > 1 (TSO). This case
is rare but not impossible.

Signed-off-by: Yuchung Cheng <ycheng@google.com>
Acked-by: Ilpo Järvinen <ilpo.jarvinen@helsinki.fi>
Signed-off-by: David S. Miller <davem@davemloft.net>