git.openwrt.org Git - openwrt/staging/blogic.git/log

MIPS: Detect MIPSr6 Virtual Processor support

MIPSr6 introduces support for "Virtual Processors", which are
conceptually similar to VPEs from the now-deprecated MT ASE. Detect
whether the system supports VPs using the VP bit in Config5, adding
cpu_has_vp for use by later patches.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: Maciej W. Rozycki <macro@imgtec.com>
Cc: Joshua Kinard <kumba@gentoo.org>
Cc: Steven J. Hill <sjhill@realitydiluted.com>
Cc: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12327/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ath79: add initial support for DPT-Module

The following features are supported:

  * UART;
  * SPI-flash;
  * USB host;
  * GPIO key and LED.

Links:

  * https://dptechnics.com/shop/index.php?route=product/product&path=59&product_id=50
  * https://dptechnics.com/shop/index.php?route=product/product&path=59&product_id=63

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Daan Pape <daan@dptechnics.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12886/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

devicetree: add DPTechnics vendor id

Please see https://www.dptechnics.com/contact for details.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Daan Pape <daan@dptechnics.com>
Cc: devicetree@vger.kernel.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12885/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ath79: add initial support for Onion Omega

The following features are supported:

  * UART;
  * SPI-flash;
  * USB host;
  * GPIO key and LED.

Please see https://onion.io/omega for details.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: L. D. Pinney <ldpinney@gmail.com>
Cc: Boken Lin <bl@onion.io>
Cc: Jacky Huang <huangfangcheng@163.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12884/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

devicetree: add Onion Corporation vendor id

Please see https://onion.io/contact for details.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12883/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ath79: add initial support for Dragino MS14 (Dragino 2)

The following features are supported:

  * UART;
  * SPI-flash;
  * USB host;
  * GPIO keys and LEDs.

Links:

    * http://www.dragino.com/products/mother-board/item/71-ms14-p.html
    * https://wiki.openwrt.org/toh/dragino/ms14

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12882/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

devicetree: add Dragino vendor id

Please see http://www.dragino.com/about/about.html for details.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12881/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ath79: add initial support for TP-LINK MR3020

The following features are supported:

  * UART;
  * SPI-flash;
  * USB host;
  * GPIO keys and LEDs.

Links:

  * http://www.tp-link.com/en/products/details/?model=TL-MR3020
  * http://wiki.openwrt.org/toh/tp-link/tl-mr3020
  * https://wikidevi.com/wiki/TP-LINK_TL-MR3020

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12880/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ath79: update devicetree clock support for AR9331

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12879/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: dts: qca: introduce AR9331 devicetree

This patch introduces devicetree for Atheros AR9331 SoC (AKA Hornet).
The AR9331 chip is a Wi-Fi System-On-Chip (WiSOC),
typically used in very cheap Access Points and Routers.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12878/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ath79: Disable platform code for OF boards.

For OF boards we have to skip platform initialization code
so we can prove that OF code do all necessary initialization.

[ralf@linux-mips.org: Fix merge conflict.]

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Signed-off-by: Sudip Mukherjee <sudip.mukherjee@codethink.co.uk>
Reviewed-by: Marek Vasut <marex@denx.de>
Cc: Alban Bedel <albeu@free.fr>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12877/
Patchwork: https://patchwork.linux-mips.org/patch/12920/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ath79: update devicetree clock support for AR9132

Current ath79 clock.c code does not read reference clock and
pll setup from devicetree. E.g. you can set any clock rate value
in board DTS but it will have no effect on the real clk calculation.

This patch fixes some AR9132 devicetree clock support defects:

  * clk initialization function ath79_clocks_init_dt_ng()
    is introduced; it actually gets pll block base register
    address and reference clock from devicetree;
  * pll register parsing code is moved to the separate
    ar724x_clk_init() function; this function
    can be called from platform code or from devicetree code.

Also mips_hpt_frequency value is set from dt, so the appropriate
clock parameter is added to the cpu@0 devicetree node.

The same approach can be used for adding AR9331 devicetree support.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-clk@vger.kernel.org
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12876/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ath79: Introduce <dt-bindings/clock/ath79-clk.h>

The include/dt-bindings/clock/ath79-clk.h header file
is introduced so we can use symbolic identifiers for SoC clocks.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: Alban Bedel <albeu@free.fr>
Cc: Michael Turquette <mturquette@baylibre.com>
Cc: Stephen Boyd <sboyd@codeaurora.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: linux-mips@linux-mips.org
Cc: linux-clk@vger.kernel.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12875/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: dts: qca: ar9132: use short references for dt nodes

Here are some Sascha Hauer's arguments for using aliases in the dts
files:

- using aliases reduces the number of indentations in dts files;

- dts files become independent of the layout of the dtsi files
   (it becomes possible to introduce another bus {} hierarchy between
   a toplevel bus and the devices when you have to);

- less chances for typos. if &i2c2 does not exist you get an error.
   If instead you duplicate the whole path in the dts file a typo
   in the path will just create another node.

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Alban Bedel <albeu@free.fr>
Cc: Sascha Hauer <s.hauer@pengutronix.de>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Frank Rowand <frowand.list@gmail.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12873/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: dts: qca: ar9132_tl_wr1043nd_v1.dts: drop unused alias node

The TP-LINK TL-WR1043ND board has only one serial port,
so replacing the default of 0 with 0 does nothing useful.

Moreover, the correct name for aliases node is "aliases" not "alias".

An overview of the "aliases" node usage can be found
on the device tree usage page at devicetree.org [1].

Also please see chapter 3.3 ("Aliases node") of the ePAPR 1.1 [2].

[1] http://devicetree.org/Device_Tree_Usage#aliases_Node
[2] https://www.power.org/documentation/epapr-version-1-1/

Signed-off-by: Antony Pavlov <antonynpavlov@gmail.com>
Acked-by: Alban Bedel <albeu@free.fr>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12872/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Lantiq: Make it possible to build in no device tree

Now it is possible to build in no device tree at all and depend on the
boot loader providing one or someone concatenating a device tree to the
end of the image.

This was copied from arch/mips/bmips/Kconfig

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12899/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Lantiq: Add support for device tree file from boot loader

This fetches the device tree file like it is specified in the MIPS UHI
interface if one was found. This is also used when the device tree file
was appended to the kernel image with cat.
This code is copied from arch/mips/bmips/setup.c.

Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
Acked-by: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12898/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Octeon: Add DTS for EdgeRouter Lite

Add DTS for EdgeRouter Lite that is usable as is without any "pruning"
with APPENDED_DTB.

Compared to builtin generic DTB, we can avoid errors and delays from
probing non-existent I2C devices.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Octeon: Add DTS for D-Link DSR-1000N

Add DTS for D-Link DSR-1000N that is usable as is without any "pruning"
with APPENDED_DTB. Split out the common parts from octeon_3xxx.dts
into octeon_3xxx.dtsi.

Compared to builtin generic DTB, we can specificy fixed links properly
and avoid probing non-existent I2C devices.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: devicetree@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12840/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: panic immediately when panic_on_oops

MIPS wants to sleep 5 seconds before panicking when panic_on_oops is set,
with no apparent reason. Remove this feature, since some users may want
their systems to fail as quickly as possible.

Users who want to delay reboot after panic can use PANIC_TIMEOUT.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: James E.J. Bottomley <jejb@parisc-linux.org>
Cc: Helge Deller <deller@gmx.de>
Cc: linux-mips@linux-mips.org
Cc: linux-parisc@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12845/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: BCM47xx: Move SPROM driver to drivers/firmware/

Broadcom ARM home routers store SPROM content in NVRAM just like MIPS
ones. To share SPROM code we need to move it out of arch/mips/ to some
common place. We already have bcm47xx_nvram in firmware path and SPROM
should fit there as well.
This driver is responsible for parsing SoC configuration data into a
struct shared between ssb and bcma buses.
This was tested with BCM4706 & BCM5357C0 (BCM47XX) and BCM4708A0
(ARCH_BCM_5301X).

Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12210/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ralink: Make reset_control_ops const

The reset_ops structure is never modified. Make it const.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: kernel@pengutronix.de
Patchwork: https://patchwork.linux-mips.org/patch/12618/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: lantiq: Make reset_control_ops const

The reset_ops structure is never modified. Make it const.

Signed-off-by: Philipp Zabel <p.zabel@pengutronix.de>
Acked-by: John Crispin <john@phrozen.org>
Cc: linux-mips@linux-mips.org
Cc: kernel@pengutronix.de
Patchwork: https://patchwork.linux-mips.org/patch/12619/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Octeon: device_tree_init: fill mac addresses when using appended dtb

Fill MAC addresses from bootinfo when using appended DTB.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12590/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Octeon: device_tree_init: don't fill mac if already set

Don't fill MAC address if it's already set. This allows DTB to
override the bootinfo.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12589/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Octeon: device_tree_init: use separate pass to fill mac addresses

Use separate pass to fill MAC addresses. This is needed because we want
to do this also for the appended DTB.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Acked-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12588/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Octeon: Use model string from DTB for unknown board type

Use model string from DTB for board type if the board is unknown.
This is more informative, e.g. with EdgeRouter Pro the /proc/cpuinfo
will display "ubnt,e200 (CN6120p1.1-1000-NSP)" instead of misleading
"Unsupported Board".

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12582/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Octeon: Initialize system type string after device tree init.

Initialize system type string after device tree init.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12583/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Octeon: board_type_to_string: return NULL for unsupported board

Return NULL for unsupported board.

Signed-off-by: Aaro Koskinen <aaro.koskinen@iki.fi>
Cc: David Daney <ddaney.cavm@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12581/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: OCTEON: Simplify code in octeon_irq_ciu_gpio_set_type()

Use the trigger type passed in to the function instead of reading it
back out of the irq_data.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12501/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: OCTEON: Add SMP support for OCTEON cn78xx et al.

OCTEON chips with the CIU3 interrupt controller use a different IPI
mechanism that previous models.

Add plat_smp_ops for the cn78xx and probing code to choose between the
two types of ops.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12499/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: OCTEON: Add support for OCTEON III interrupt controller.

Add irq_chip support for both IPI and "normal" interrupts of the CIU3
controller. Document the device tree binding for the CIU3.

Some functions are non-static as they will be used by follow-on
support for MSI-X.

Signed-off-by: David Daney <david.daney@cavium.com>
Acked-by: Rob Herring <robh@kernel.org>
Cc: Rob Herring <robh+dt@kernel.org>
Cc: Pawel Moll <pawel.moll@arm.com>
Cc: Mark Rutland <mark.rutland@arm.com>
Cc: Ian Campbell <ijc+devicetree@hellion.org.uk>
Cc: Kumar Gala <galak@codeaurora.org>
Cc: devicetree@vger.kernel.org
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12500/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: OCTEON: Don't attempt to use nonexistent registers on OCTEON III models.

Attempts to read the nonexistent registers results in bus errors.
Either use registers that exist, or don't do the access as appropriate.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12502/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: OCTEON: Add model checking support for cn73xx, cnf75xx and cn78xx

Follow on patchs need to be able to distinguish the new models.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12498/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: OCTEON: Add register definitions for cn73xx, cnf75xx and cn78xx.

These new members of the OCTEON III family have some new registers,
update some of the definitions for use in follow on patches.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12497/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Select CONFIG_HANDLE_DOMAIN_IRQ and make it work.

Per the subject, always select HANDLE_DOMAIN_IRQ, and implement
set_irq_regs() so that it actually works.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12496/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: OCTEON: Remove some code limiting NR_IRQS to 255

Follow-on patches for OCTEON III will increase the number of irqs to
potentially more than 256.

Increase the width of the octeon_irq_ciu_to_irq to int to be able to
handle this case. Remove the hacky code that verified that u8 would
not be overflowed.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12495/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: OCTEON: Extend number of supported CPUs past 32

To support more than 48 CPUs, the bootinfo structure grows a new
coremask structure. Add the definition of the structure and add it to
struct cvmx_bootinfo. In prom_init(), copy the new coremask data into
the sysinfo structure, and use it in smp_setup().

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12319/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: OCTEON: Remove dead code from cvmx-sysinfo.

Get rid of the long unused code.

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12318/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Add CPU identifiers and probing for Cavium CN73xx and CNF75xx processors.

Add new processor identifiers for Cavium CN73xx and CNF75xx
processors, and probe for them in cpu-probe.c

Signed-off-by: David Daney <david.daney@cavium.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12311/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: highmem: Turn flush_cache_kmaps into a no-op.

It was calling flush_cache_all() which is a no-op since a long time anyway
and which was overkill in the old days when it was actually doing something
because only the D-cache needs to be flushed, never the I-cache, never
the S-cache. Since however highmem on MIPS is still only supported on
processors that don't suffer from cache aliases, we could turn
flush_cache_kmaps() into a no-op - but for paranoia's sake we rather make
it BUG_ON(cpu_has_dc_aliases()).

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Loongson64: Remove call to flush_cache_all().

flush_cache_all() is a nop and loongson 3 is fully coherent.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: VR41xx: Use __flush_cache_all instead of flush_cache_all.

It's probably a good idea to flush caches before reset and by the time
this code was written flush_cache_all did actually still do something.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: MSP71xx: Use __flush_cache_all instead of flush_cache_all.

Flushing caches is probably sensible on reset but flush_cache_all has been
a no-op for a very long time.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Octeon: Use __flush_cache_all instead of flush_cache_all.

flush_cache_all will go away.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ath79: Use the reset controller to restart OF machines

Don't set _machine_restart() on OF machines as the reset driver
now provides a system restart handler.

Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12235/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ath79: Add zboot debug serial support

Reuse the early printk code to support the serial in zboot. We copy
early_printk.c instead of referencing it because we need to build a
different object file for the normal kernel and zboot.

Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: Andrew Bresticker <abrestic@chromium.org>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: Wu Zhangjin <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12234/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ath79: Remove the builtin DTB support

Now that appended DTB is usable we can drop the builtin DTB support.

Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12231/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: ath79: Add support for DTB passed using the UHI boot protocol

This is needed for bootloader supporting UHI and to support appended
DTB.

Signed-off-by: Alban Bedel <albeu@free.fr>
Cc: Felix Fietkau <nbd@openwrt.org>
Cc: Antony Pavlov <antonynpavlov@gmail.com>
Cc: Gabor Juhos <juhosg@openwrt.org>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12230/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Netlogic: Fix CP0_EBASE redefinition warnings

A couple of netlogic assembly files define CP0_EBASE to $15, the same as
CP0_PRID in mipsregs.h, and use it for accessing both CP0_PRId and
CP0_EBase registers. However commit 609cf6f2291a ("MIPS: CPS: Early
debug using an ns16550-compatible UART") added a different definition of
CP0_EBASE to mipsregs.h, which included a register select of 1. This
causes harmless build warnings like the following:

  arch/mips/netlogic/common/reset.S:53:0: warning: "CP0_EBASE" redefined
  #define CP0_EBASE $15
  ^
  In file included from arch/mips/netlogic/common/reset.S:41:0:
  ./arch/mips/include/asm/mipsregs.h:63:0: note: this is the location of the previous definition
  #define CP0_EBASE $15, 1
  ^

Update the code to use the definitions from mipsregs.h for accessing
both registers.

Fixes: 609cf6f2291a ("MIPS: CPS: Early debug using an ns16550-compatible UART")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Acked-by: Jayachandran C <jchandra@broadcom.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13183/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Adjust set_pte() SMP fix to handle R10000_LLSC_WAR

Update the recent changes to set_pte() that were added in 46011e6ea392
to handle R10000_LLSC_WAR, and format the assembly to match other areas
of the MIPS tree using the same WAR.

This also incorporates a patch recently sent in my Markos Chandras,
"Remove local LL/SC preprocessor variants", so that patch doesn't need
to be applied if this one is accepted.

Signed-off-by: Joshua Kinard <kumba@gentoo.org>
Fixes: 46011e6ea392 ("MIPS: Make set_pte() SMP safe.)
Cc: David Daney <david.daney@cavium.com>
Cc: Linux/MIPS <linux-mips@linux-mips.org>
Patchwork: https://patchwork.linux-mips.org/patch/11103/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Move definitions for 32/64-bit agonstic inline assembler to new file.

Inspired by Markos Chandras' patch. I just didn't want do pull bitsops.h
into pgtable.h.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
References: https://patchwork.linux-mips.org/patch/11052/

MIPS: Fix MSA assembly warnings

Building an MSA capable kernel with a toolchain that supports MSA
produces warnings such as this:

arch/mips/kernel/r4k_fpu.S:229: Warning: the `msa' extension requires 64-bit FPRs

This is due to ".set msa" without ".set fp=64" in the non doubleword MSA
load/store macros, since MSA requires the 64-bit FPU registers (FR=1).
Add the missing fp=64 in these macros to silence the warnings.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13063/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Fix MSA assembly with big thread offsets

When lockdep is enabled on a 64-bit kernel the FPR offset into the
thread structure exceeds the maximum range of the MSA ld.d/st.d
instructions. For example THREAD_FPR31 = 4644 (instead of 2448), while
the signed immediate field is only 10 bits with an implicit multiply by
8, giving a maximum offset of 511*8 = 4088.

This isn't a problem when the toolchain doesn't support MSA as the
ld_*/st_* macros perform the addition separately into $1 with [d]addui
which has a 16bit signed immediate field.

Fix the case where the toolchain does support MSA by doing a single
addition of THREAD_FPR0 into $1 with [d]addui, and doing the ld_*/st_*
relative to that.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13064/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Fix MSA ld_*/st_* asm macros to use PTR_ADDU

The MSA ld_*/st_* assembler macros for when the toolchain doesn't
support MSA use addu to offset the base address. However it is a virtual
memory pointer so fix it to use PTR_ADDU which expands to daddu for
64-bit kernels.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.3.y-
Patchwork: https://patchwork.linux-mips.org/patch/13062/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Use copy_s.fmt rather than copy_u.fmt

In revision 1.12 of the MSA specification, the copy_u.w instruction has
been removed for MIPS32 & the copy_u.d instruction has been removed for
MIPS64. Newer toolchains (eg. Codescape SDK essentials 2015.10) will
complain about this like so:

arch/mips/kernel/r4k_fpu.S:290: Error: opcode not supported on this
processor: mips32r2 (mips32r2) `copy_u.w $1,$w26[3]'

Since we always copy to the width of a GPR, simply use copy_s instead of
copy_u to fix this.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.3.x+
Patchwork: https://patchwork.linux-mips.org/patch/13061/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: memset.S: Disable code unused with non-R6 MIPS configs

This complements commit 8c56208aff77 ("MIPS: lib: memset: Add MIPS R6
support").

Signed-off-by: Maciej W. Rozycki <macro@linux-mips.org>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12452/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS64: R6: R2 emulation bugfix

Error recovery pointers for fixups was improperly set as ".word"
which is unsuitable for MIPS64.

Replaced by STR(PTR)

[ralf@linux-mips.org: Apply changes as requested in the review process.]

Signed-off-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Markos Chandras <markos.chandras@imgtec.com>
Fixes: b0a668fb2038 ("MIPS: kernel: mips-r2-to-r6-emul: Add R2 emulator for MIPS R6")
Cc: macro@linux-mips.org
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Cc: <stable@vger.kernel.org> # 4.0+
Patchwork: https://patchwork.linux-mips.org/patch/9911/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: dma-default: Defend against NULL dev in massage_gfp_flags

This patch ensures that the dev parameter is checked for NULL before it
is dereferenced in massage_gfp_flags. If dev is NULL, then fall back
setting the GFP flag requested and available.

Signed-off-by: Matt Redfearn <matt.redfearn@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11919/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: oprofile: Fix a preemption issue

Use boot_cpu_type() instead of current_cpu_type() in oprofile_arch_init()
to avoid the below warning, cpu_type is normally consistent in a MIPS SMP
system.  There are a few exceptions such as SGI servers where it is
possible to mix R10000, R12000, R14000 and R16000 within certain
constraints.  Let's not worry about those now.

BUG: using smp_processor_id() in preemptible [00000000] code: insmod/952
caller is oprofile_arch_init+0x30/0x194 [oprofile]
CPU: 5 PID: 952 Comm: insmod Not tainted 4.1.13-WR8.0.0.0_standard #1
Stack : ffffffff80c10000 0000000000000001 8000000025bf0790 ffffffff80e10000
  ffffffff80e50000 ffffffff80254e2c ffffffff80b64428 ffffffff80e10790
  0000000000000000 ffffffff801caeb8 0000000000000045 0000000000000005
  ffffffff80c10000 ffffffff801cb798 0000000000000000 ffffffff80e30000
  0000000000000000 ffffffff801ff1c0 ffffffff80e2d2f8 000000000000000b
  ffffffff801cbba0 ffffffff80e107b0 ffffffff80a77828 0000000000000005
  00000000000003b8 ffffffff80e2d2f8 800000040ad39960 ffffffff801f9950
  0000000000000124 80000004093b7990 80000004093b7ab8 ffffffff80925108
  ffffffff80b69a07 ffffffff80a6f0d0 8000000407240e00 ffffffff801cc934
  000000000000005d ffffffff80159080 0000000000000005 00000000000003b8
  ...
Call Trace:
[<ffffffff80159080>] show_stack+0xe8/0x108
[<ffffffff80925108>] dump_stack+0x8c/0xd8
[<ffffffff80606570>] check_preemption_disabled+0x110/0x118
[<ffffffffc0086104>] oprofile_arch_init+0x30/0x194 [oprofile]
[<ffffffffc008602c>] oprofile_init+0x2c/0xc0 [oprofile]
[<ffffffff80100550>] do_one_initcall+0xa0/0x1c0
[<ffffffff80921e04>] do_init_module+0x80/0x1d8
[<ffffffff801fd0d4>] load_module+0x1b74/0x2278
[<ffffffff801fdab4>] SyS_finit_module+0xcc/0xf0
[<ffffffff80165884>] handle_sysn32+0x44/0x70

[ralf@linux-mips.org: Correct commit message.]

Signed-off-by: Yanjiang Jin <yanjiang.jin@windriver.com>
Cc: rric@kernel.org
Cc: jinyanjiang@gmail.com
Cc: linux-mips@linux-mips.org
Cc: oprofile-list@lists.sf.net
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/11769/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Loongson-3: Fix build error after ld-version.sh modification

Commit d5ece1cb074b2c ("Fix ld-version.sh to handle large 3rd version
part") modifies the ld version description. This causes a build error
on Loongson-3, so fix it.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J . Hill <sjhill@realitydiluted.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: Huacai Chen <chenhc@lemote.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12890/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Loongson-3: Reserve 32MB for RS780E integrated GPU

Due to datasheet, reserving 0xff800000~0xffffffff (8MB below 4GB) is
not enough for RS780E integrated GPU's TOM (top of memory) registers
and MSI/MSI-x memory region, so we reserve 0xfe000000~0xffffffff (32MB
below 4GB).

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J . Hill <sjhill@realitydiluted.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12889/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Reserve nosave data for hibernation

After commit 92923ca3aacef63c92d ("mm: meminit: only set page reserved
in the memblock region"), the MIPS hibernation is broken. Because pages
in nosave data section should be "reserved", but currently they aren't
set to "reserved" at initialization. This patch makes hibernation work
again.

Signed-off-by: Huacai Chen <chenhc@lemote.com>
Cc: Aurelien Jarno <aurelien@aurel32.net>
Cc: Steven J . Hill <sjhill@realitydiluted.com>
Cc: Fuxin Zhang <zhangfx@lemote.com>
Cc: Zhangjin Wu <wuzhangjin@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: stable@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12888/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Sibyte: Fix Kconfig dependencies of SIBYTE_BUS_WATCHER

Commit 6793f55cbc84 ("MIPS: sibyte: Amend dependencies for
SIBYTE_BUS_WATCHER") changed the dependencies for
SIBYTE_BUS_WATCHER to make it visible only if SIBYTE_BCM112X
or SIBYTE_SB1250 are enabled.

In the code in arch/mips/sibyte/common/bus_watcher, however,
a #if defined() check suggests that this functionality should
also be available for SIBYTE_BCM1x55 and SIBYTE_BCM1x80.

Make it selectable by extending the dependencies of
SIBYTE_BUS_WATCHER in arch/mips/sibyte/Kconfig.

Reported-by: Jonas Rabenstein <jonas.rabenstein@studium.uni-erlangen.de>
Signed-off-by: Andreas Ruprecht <andreas.ruprecht@fau.de>
Cc: valentinrothberg@gmail.com
Cc: stefan.hengelein@fau.de
Cc: pebolle@tiscali.nl
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/10736/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: I6400: Icache fills from dcache

Coherence Manager 3 (CM3) as present in I6400 can fill icache lines
effectively from dirty dcaches, so there is no need to flush dirty lines
from dcaches through to L2 prior to icache invalidation.

Set the MIPS_CACHE_IC_F_DC flag such that cpu_has_ic_fills_f_dc
evaluates to true, which avoids those dcache flushes.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12180/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: c-r4k: Sync icache when it fills from dcache

It is still necessary to handle icache coherency in flush_cache_range()
and copy_to_user_page() when the icache fills from the dcache, even
though the dcache does not need to be written back. However when this
handling was added in commit 2eaa7ec286db ("[MIPS] Handle I-cache
coherency in flush_cache_range()"), it did not do any icache flushing
when it fills from dcache.

Therefore fix r4k_flush_cache_range() to run
local_r4k_flush_cache_range() without taking into account whether icache
fills from dcache, so that the icache coherency gets handled. Checks are
also added in local_r4k_flush_cache_range() so that the dcache blast
doesn't take place when icache fills from dcache.

A test to mmap a page PROT_READ|PROT_WRITE, modify code in it, and
mprotect it to VM_READ|VM_EXEC (similar to case described in above
commit) can hit this case quite easily to verify the fix.

A similar check was added in commit f8829caee311 ("[MIPS] Fix aliasing
bug in copy_to_user_page / copy_from_user_page"), so also fix
copy_to_user_page() similarly, to call flush_cache_page() without taking
into account whether icache fills from dcache, since flush_cache_page()
already takes that into account to avoid performing a dcache flush.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Leonid Yegoshin <leonid.yegoshin@imgtec.com>
Cc: Manuel Lauss <manuel.lauss@gmail.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12179/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Enable ptrace hw watchpoints on MIPS R6

HARDWARE_WATCHPOINTS isn't being enabled for CPU_MIPSR6, even though it
has an identical hardware watchpoint interface to CPU_MIPSR2, which
prevents ptrace watchpoints from being loaded when executing a ptraced
process even though the watchpoints are described in /proc/cpuinfo.

Enable HARDWARE_WATCHPOINTS for CPU_MIPSR6 too.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12727/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Fix watchpoint restoration

Commit f51246efee2b ("MIPS: Get rid of finish_arch_switch().") moved the
__restore_watch() call from finish_arch_switch() (i.e. after resume()
returns) to before the resume() call in switch_to(). This results in
watchpoints only being restored when a task is descheduled, preventing
the watchpoints from being effective most of the time, except due to
chance before the watchpoints are lazily removed.

Fix the call sequence from switch_to() through to
mips_install_watch_registers() to pass the task_struct pointer of the
next task, instead of using current. This allows the watchpoints for the
next (non-current) task to be restored without reintroducing
finish_arch_switch().

Fixes: f51246efee2b ("MIPS: Get rid of finish_arch_switch().")
Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Paul Burton <paul.burton@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 4.3.x-
Patchwork: https://patchwork.linux-mips.org/patch/12726/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Avoid using unwind_stack() with usermode

When showing backtraces in response to traps, for example crashes and
address errors (usually unaligned accesses) when they are set in debugfs
to be reported, unwind_stack will be used if the PC was in the kernel
text address range. However since EVA it is possible for user and kernel
address ranges to overlap, and even without EVA userland can still
trigger an address error by jumping to a KSeg0 address.

Adjust the check to also ensure that it was running in kernel mode. I
don't believe any harm can come of this problem, since unwind_stack() is
sufficiently defensive, however it is only meant for unwinding kernel
code, so to be correct it should use the raw backtracing instead.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/11701/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>
(cherry picked from commit d2941a975ac745c607dfb590e92bb30bc352dad9)

MIPS: Don't unwind to user mode with EVA

When unwinding through IRQs and exceptions, the unwinding only continues
if the PC is a kernel text address, however since EVA it is possible for
user and kernel address ranges to overlap, potentially allowing
unwinding to continue to user mode if the user PC happens to be in the
kernel text address range.

Adjust the check to also ensure that the register state from before the
exception is actually running in kernel mode, i.e. !user_mode(regs).

I don't believe any harm can come of this problem, since the PC is only
output, the stack pointer is checked to ensure it resides within the
task's stack page before it is dereferenced in search of the return
address, and the return address register is similarly only output (if
the PC is in a leaf function or the beginning of a non-leaf function).

However unwind_stack() is only meant for unwinding kernel code, so to be
correct the unwind should stop there.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Reviewed-by: Leonid Yegoshin <Leonid.Yegoshin@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 3.15+
Patchwork: https://patchwork.linux-mips.org/patch/11700/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: BMIPS: Fill in current_cpu_data.core

Read the core ID in bmips_smp_finish() for BMIPS5000 CPUs to get appropriate
processor parenting in set_cpu_sibling_map().

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: john@phrozen.org
Cc: cernekee@gmail.com
Cc: jon.fraser@broadcom.com
Cc: jaedon.shin@gmail.com
Cc: dragan.stancevic@gmail.com
Cc: jogo@openwrt.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12380/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: BMIPS: Remove maxcpus from BCM97435SVMB DTS

Now that SMP properly works on 7435, do not restrict the number of core,
unleash them all.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: john@phrozen.org
Cc: cernekee@gmail.com
Cc: jon.fraser@broadcom.com
Cc: jaedon.shin@gmail.com
Cc: dragan.stancevic@gmail.com
Cc: jogo@openwrt.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12379/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: BMIPS: Add missing 7038 L1 register cells to BCM7435

7435 has 4 7038 L1 base register address for each of its Core + TP (for a total
of 4 threads of execution), add the two missing cells for Core 1. We are
providing HW interrupts 2/3 even for Core 1/TP0/TP1 because that's what they
are, and we can later decide to remap these in software to provide proper
interrupt affinity/parenting.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: john@phrozen.org
Cc: cernekee@gmail.com
Cc: jon.fraser@broadcom.com
Cc: jaedon.shin@gmail.com
Cc: dragan.stancevic@gmail.com
Cc: jogo@openwrt.org
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12378/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: BMIPS: Make whitespacely correct.

Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: BMIPS: Add Whirlwind (BMIPS5200) initialization code

Import bmips_5xxx_init.S from the stblinux-3.3 tree, and to make sure that this
would work nicely with a BMIPS multiplatform kernel (with BMIPS330, BMIPS43XX
and BMIPS5000 enabled), update soft_reset to check for the BMIPS5200 processor
id (PRID_IMP_BMIPS5200) and execute bmips_5xxx_init for these processors to
bring them online.

Tested on 7425, 7429 and 7435 with CPU hotplug. 7435 SMP still needs some
additional changes in the L1 interrupt area to work properly with interrupt
affinity.

Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: linux-mips@linux-mips.org
Cc: john@phrozen.org
Cc: cernekee@gmail.com
Cc: jon.fraser@broadcom.com
Cc: jaedon.shin@gmail.com
Cc: dragan.stancevic@gmail.com
Cc: jogo@openwrt.org
Patchwork: https://patchwork.linux-mips.org/patch/12377/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: BMIPS: Fix PRID_IMP_BMIPS5000 masking for BMIPS5200

BMIPS5000 have a PrID value of 0x5A00 and BMIPS5200 have a PrID value of
0x5B00, which, masked with 0x5A00, returns 0x5A00. Update all conditionals on
the PrID to cover both variants since we are going to need this to enable
BMIPS5200 SMP. The existing check, masking with 0xFF00 would not cover
BMIPS5200 at all.

Fixes: 68e6a78373a6d ("MIPS: BMIPS: Add PRId for BMIPS5200 (Whirlwind)")
Fixes: 6465460c92a85 ("MIPS: BMIPS: change compile time checks to runtime checks")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Cc: john@phrozen.org
Cc: cernekee@gmail.com
Cc: jogo@openwrt.org
Cc: jaedon.shin@gmail.com
Cc: jfraser@broadcom.com
Cc: pgynther@google.com
Cc: dragan.stancevic@gmail.com
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/12279/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Don't BUG_ON when no IPI domain is found

Commit fbde2d7d8290 ("MIPS: Add generic SMP IPI support") introduced
code that BUG_ON's in the case of a kernel that supports IPI domains but
does not have one at runtime. This case is possible on Malta where for
IPIs we may use either the GIC (which has an IPI IRQ domain
implementation) or core-local software interrupts between VPEs (which do
not currently have an IPI IRQ domain implementation). We can not know
which will be used until runtime when we know whether a GIC is actually
present, and if we run on a system with multiple VPEs and no GIC then
the BUG_ON is hit.

Commit 19fb5818ed60 ("IPS: Fix broken malta qemu") worked around this
for the single-core single-VPE case typically seen using QEMU, but does
not catch the multi-VPE case. This patch removes the insufficient CPU
presence check that was added and works around the bug differently,
effectively reverting that commit.

A simple way to reproduce this bug is by using QEMU, which partially
implements the MT ASE but does not implement the GIC as of version 2.5.
Using "-cpu 34Kf -smp 2" will present a system with 2 VPEs in one core &
no GIC, hitting the BUG_ON.

Given that we're post-merge-window on the way to v4.6, avoid this by
just returning from mips_smp_ipi_init when no IPI IRQ domain is found.
Ideally at some point all IPI implementations would be converted to the
same IPI IRQ domain interface & we'd be able to restore the check.

Signed-off-by: Paul Burton <paul.burton@imgtec.com>
Cc: Qais Yousef <qsyousef@gmail.com>
Fixes: fbde2d7d8290 ("MIPS: Add generic SMP IPI support")
Fixes: 19fb5818ed60 ("IPS: Fix broken malta qemu")
Reverts: 19fb5818ed60 ("IPS: Fix broken malta qemu")
Cc: Qais Yousef <qsyousef@gmail.com>
Cc: James Hogan <james.hogan@imgtec.com>
Cc: Alex Smith <alex.smith@imgtec.com>
Cc: linux-mips@linux-mips.org
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/13007/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Fix siginfo.h to use strict posix types

Commit 85efde6f4e0d ("make exported headers use strict posix types")
changed the asm-generic siginfo.h to use the __kernel_* types, and
commit 3a471cbc081b ("remove __KERNEL_STRICT_NAMES") make the internal
types accessible only to the kernel, but the MIPS implementation hasn't
been updated to match.

Switch to proper types now so that the exported asm/siginfo.h won't
produce quite so many compiler errors when included alone by a user
program.

Signed-off-by: James Hogan <james.hogan@imgtec.com>
Cc: Christopher Ferris <cferris@google.com>
Cc: linux-mips@linux-mips.org
Cc: <stable@vger.kernel.org> # 2.6.30-
Cc: linux-kernel@vger.kernel.org
Patchwork: https://patchwork.linux-mips.org/patch/12477/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

MIPS: Fix crash registers on non-crashing CPUs

As part of handling a crash on an SMP system, an IPI is send to
all other CPUs to save their current registers and stop. It was
using task_pt_regs(current) to get the registers, but that will
only be accurate if the CPU was interrupted running in userland.
Instead allow the architecture to pass in the registers (all
pass NULL now, but allow for the future) and then use get_irq_regs()
which should be accurate as we are in an interrupt. Fall back to
task_pt_regs(current) if nothing else is available.

Signed-off-by: Corey Minyard <cminyard@mvista.com>
Cc: David Daney <ddaney@caviumnetworks.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/13050/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

mips: Fix CPC_BASE_ADDR mask to match datasheet

According to 'MIPS32® interAptivTM Multiprocessing
System Programmer’s Guide' CPC_BASE_ADDR takes bits [31:15].

This change is tested ith mt7621 which wasn't working without it.

Signed-off-by: Nikolay Martynov <mar.kolya@gmail.com>
Reviewed-by: James Hogan <james.hogan@imgtec.com>
Cc: linux-mips@linux-mips.org
Patchwork: https://patchwork.linux-mips.org/patch/11766/
Signed-off-by: Ralf Baechle <ralf@linux-mips.org>

Merge tag 'char-misc-4.6-rc7' of git://git./linux/kernel/git/gregkh/char-misc

Pull misc driver fixes from Gfreg KH:
"Here are three small fixes for some driver problems that were
  reported.  Full details in the shortlog below.

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc:
  nvmem: mxs-ocotp: fix buffer overflow in read
  Drivers: hv: vmbus: Fix signaling logic in hv_need_to_signal_on_read()
  misc: mic: Fix for double fetch security bug in VOP driver

Merge tag 'staging-4.6-rc7' of git://git./linux/kernel/git/gregkh/staging

Pull IIO driver fixes from Grek KH:
"It's really just IIO drivers here, some small fixes that resolve some
  'crash on boot' errors that have shown up in the -rc series, and other
  bugfixes that are required.

  All have been in linux-next with no reported problems"

* tag 'staging-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
  iio: imu: mpu6050: Fix name/chip_id when using ACPI
  iio: imu: mpu6050: fix possible NULL dereferences
  iio:adc:at91-sama5d2: Repair crash on module removal
  iio: ak8975: fix maybe-uninitialized warning
  iio: ak8975: Fix NULL pointer exception on early interrupt

Merge tag 'usb-4.6-rc7' of git://git./linux/kernel/git/gregkh/usb

Pull USB fixes from Greg KH:
"Here are some last-remaining fixes for USB drivers to resolve issues
  that have shown up in testing.  And two new device ids as well.

  All of these have been in linux-next with no reported issues"

* tag 'usb-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb:
  Revert "USB / PM: Allow USB devices to remain runtime-suspended when sleeping"
  usb: musb: jz4740: fix error check of usb_get_phy()
  Revert "usb: musb: musb_host: Enable HCD_BH flag to handle urb return in bottom half"
  usb: musb: gadget: nuke endpoint before setting its descriptor to NULL
  USB: serial: cp210x: add Straizona Focusers device ids
  USB: serial: cp210x: add ID for Link ECU

Merge branch 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm

Pull ARM fixes from Russell King:
"These are a number of updates to fix a few problems found in the ARM
  nommu code over the last couple of years, caused mostly by changes on
  the mmu side"

* 'fixes' of git://git.armlinux.org.uk/~rmk/linux-arm:
  ARM: 8573/1: domain: move {set,get}_domain under config guard
  ARM: 8572/1: nommu: change memory reserve for the vectors
  ARM: 8571/1: nommu: fix PMSAv7 setup

Merge tag 'media/v4.6-5' of git://git./linux/kernel/git/mchehab/linux-media

Pull media fixes from Mauro Carvalho Chehab:

  - deadlock fixes on driver probe at exynos4-is and s43-camif drivers

  - a build breakage if media controller is enabled and USB or PCI is
   built as module.

* tag 'media/v4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] media-device: fix builds when USB or PCI is compiled as module
  [media] media: s3c-camif: fix deadlock on driver probe()
  [media] media: exynos4-is: fix deadlock on driver probe

Merge branch 'for-4.6-fixes' of git://git./linux/kernel/git/tj/libata

Pull libata fixes from Tejun Heo:
"An ahci driver addition and updates to ahci port enable handling for
  some platform devices"

* 'for-4.6-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata:
  ata: add AMD Seattle platform driver
  ARM: dts: apq8064: add ahci ports-implemented mask
  ata: ahci-platform: Add ports-implemented DT bindings.
  libahci: save port map for forced port map

Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma

Pull rdma fix from Doug Ledford:
"Fix for max sector calculation in iSER"

* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/iser: Fix max_sectors calculation

Merge branch 'for-linus' of git://git.kernel.dk/linux-block

Pull writeback fix from Jens Axboe:
"Just a single fix for domain aware writeback, fixing a regression that
  can cause balance_dirty_pages() to keep looping while not getting any
  work done"

* 'for-linus' of git://git.kernel.dk/linux-block:
  writeback: Fix performance regression in wb_over_bg_thresh()

Merge branch 'x86-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull x86 fixes from Ingo Molnar:
"This contains two fixes: a boot fix for older SGI/UV systems, and an
  APIC calibration fix"

* 'x86-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/tsc: Read all ratio bits from MSR_PLATFORM_INFO
  x86/platform/UV: Bring back the call to map_low_mmrs in uv_system_init

Merge tag 'pm+acpi-4.6-rc7' of git://git./linux/kernel/git/rafael/linux-pm

Pull power management and ACPI fixes from Rafael Wysocki:
"Fixes for problems introduced or discovered recently (intel_pstate,
  sti-cpufreq, ARM64 cpuidle, Operating Performance Points framework,
  generic device properties framework) and one fix for a hotplug-related
  deadlock in ACPICA that's been there forever, but is nasty enough.

  Specifics:

   - Fix for a recent regression in the intel_pstate driver causing it
     to fail to restore the HWP (HW-managed P-states) configuration of
     the boot CPU after suspend-to-RAM (Rafael Wysocki).

   - Fix for two recent regressions in the intel_pstate driver, one that
     can trigger a divide by zero if the driver is accessed via sysfs
     before it manages to take the first sample and one causing it to
     fail to update a structure field used in a trace point, so the
     information coming from it is less useful (Rafael Wysocki).

   - Fix for a problem in the sti-cpufreq driver introduced during the
     4.5 cycle that causes it to break CPU PM in multi-platform kernels
     by registering cpufreq-dt (which subsequently doesn't work)
     unconditionally and preventing the driver that would actually work
     from registering (Sudeep Holla).

   - Stable-candidate fix for an ARM64 cpuidle issue causing idle state
     usage counters to be incorrectly updated for idle states that were
     not entered due to errors (James Morse).

   - Fix for a recently introduced issue in the OPP (Operating
     Performance Points) framework causing it to print bogus error
     messages for missing optional regulators (Viresh Kumar).

   - Fix for a recently introduced issue in the generic device
     properties framework that may cause it to attempt to dereferece and
     invalid pointer in some cases (Heikki Krogerus).

   - Fix for a deadlock in the ACPICA core that may be triggered by
     device (eg Thunderbolt) hotplug (Prarit Bhargava)"

* tag 'pm+acpi-4.6-rc7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  PM / OPP: Remove useless check
  ACPICA: Dispatcher: Update thread ID for recursive method calls
  intel_pstate: Fix intel_pstate_get()
  cpufreq: intel_pstate: Fix HWP on boot CPU after system resume
  cpufreq: st: enable selective initialization based on the platform
  ARM: cpuidle: Pass on arm_cpuidle_suspend()'s return value
  device property: Avoid potential dereferences of invalid pointers

Merge branch 'sched-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull scheduler fix from Ingo Molnar:
"This contains a single fix that fixes a nohz tick stopping bug when
mixed-poliocy SCHED_FIFO and SCHED_RR tasks are present on a runqueue"

* 'sched-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
nohz/full, sched/rt: Fix missed tick-reenabling bug in sched_can_stop_tick()

Merge branch 'perf-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull perf fixes from Ingo Molnar:
"This tree contains two fixes: new Intel CPU model numbers and an
  AMD/iommu uncore PMU driver fix"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/amd/iommu: Do not register a task ctx for uncore like PMUs
  perf/x86: Add model numbers for Kabylake CPUs

Merge branch 'efi-urgent-for-linus' of git://git./linux/kernel/git/tip/tip

Pull EFI fixes from Ingo Molnar:
"This tree contains three fixes: a console spam fix, a file pattern fix
  and a sysfb_efi fix for a bug that triggered on older ThinkPads"

* 'efi-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  x86/sysfb_efi: Fix valid BAR address range check
  x86/efi-bgrt: Switch all pr_err() to pr_notice() for invalid BGRT
  MAINTAINERS: Remove asterisk from EFI directory names

Merge branch 'parisc-4.6-5' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc fix from Helge Deller:
"Patch from Dmitry V Levin to fix a kernel crash when a straced process
calls the (invalid) syscall which is equal to value of __NR_Linux_syscalls"

* 'parisc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
parisc: fix a bug when syscall number of tracee is __NR_Linux_syscalls

Merge tag 'arc-4.6-rc7-fixes' of git://git./linux/kernel/git/vgupta/arc

Pull ARC fixes from Vineet Gupta:
"Late in the cycle, but this has fixes for couple of issues: a PAE40
  boot crash and Arnd spotting lack of barriers in BE io-accessors.

  The 3rd patch for enabling highmem in low physical mem ;-) honestly is
  more than a "fix" but its been in works for some time, seems to be
  stable in testing and enables 2 of our customers to go forward with
  4.6 kernel.

   - Fix for PTE truncation in PAE40 builds
   - Fix for big endian IO accessors lacking IO barrier
   - Allow HIGHMEM to work with low physical addresses"

* tag 'arc-4.6-rc7-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/vgupta/arc:
  ARC: support HIGHMEM even without PAE40
  ARC: Fix PAE40 boot failures due to PTE truncation
  ARC: Add missing io barriers to io{read,write}{16,32}be()

Merge tag 'powerpc-4.6-5' of git://git./linux/kernel/git/powerpc/linux

Pull powerpc fix from Michael Ellerman:
"Fix bad inline asm constraint in create_zero_mask() from Anton
Blanchard"

* tag 'powerpc-4.6-5' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
powerpc: Fix bad inline asm constraint in create_zero_mask()

Merge branch 'drm-fixes' of git://people.freedesktop.org/~airlied/linux

Pull drm fixes from Dave Airlie:
"Fixes for i915, amdgpu/radeon and imx.

  The IMX fix is for an autoloading regression found in Fedora.  The
  radeon fixes, are the same fix to amdgpu/radeon to avoid a hardware
  lockup in some circumstances with a bad mode, and a double free bug I
  took a few hours chasing down the other morning.

  The i915 fixes are across the board, all stable material, and fixing
  some hangs and suspend/resume issues, along with a live status
  regressions"

* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux:
  gpu: ipu-v3: Fix imx-ipuv3-crtc module autoloading
  drm/amdgpu: make sure vertical front porch is at least 1
  drm/radeon: make sure vertical front porch is at least 1
  drm/amdgpu: set metadata pointer to NULL after freeing.
  drm/i915: Make RPS EI/thresholds multiple of 25 on SNB-BDW
  drm/i915: Fake HDMI live status
  drm/i915: Fix eDP low vswing for Broadwell
  drm/i915/ddi: Fix eDP VDD handling during booting and suspend/resume
  drm/i915: Fix system resume if PCI device remained enabled
  drm/i915: Avoid stalling on pending flips for legacy cursor updates

parisc: fix a bug when syscall number of tracee is __NR_Linux_syscalls

Do not load one entry beyond the end of the syscall table when the
syscall number of a traced process equals to __NR_Linux_syscalls.
Similar bug with regular processes was fixed by commit 3bb457af4fa8
("[PARISC] Fix bug when syscall nr is __NR_Linux_syscalls").

This bug was found by strace test suite.

Cc: stable@vger.kernel.org
Signed-off-by: Dmitry V. Levin <ldv@altlinux.org>
Acked-by: Helge Deller <deller@gmx.de>
Signed-off-by: Helge Deller <deller@gmx.de>