drm/i915: Make read_subslice_reg take engine

The function operates on the render engine so make the input reflect it.

v2:
 * Pass engine to read_subslice_reg. (Chris)
 * Drop inline from read_subslice_reg.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610125706.26110-1-tvrtko.ursulin@linux.intel.com

drm/i915: Remove I915_READ64 and I915_READ64_32x2

Now that all their users are gone we can remove the macros and
accompanying duplicated comment.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-6-tvrtko.ursulin@linux.intel.com

drm/i915: Convert intel_read_wm_latency to uncore mmio accessors

More implicit dev_priv removal.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-5-tvrtko.ursulin@linux.intel.com

drm/i915: Convert gem_record_fences to uncore mmio accessors

More implicit dev_priv removal.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-4-tvrtko.ursulin@linux.intel.com

drm/i915: Convert icl_get_stolen_reserved to uncore mmio accessors

More removal of implicit dev_priv.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-3-tvrtko.ursulin@linux.intel.com

drm/i915: Convert i915_reg_read_ioctl to use explicit mmio accessors

No excuse for code located in intel_uncore.c to not use intel_uncore_
helpers.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-2-tvrtko.ursulin@linux.intel.com

drm/i915: Eliminate unused mmio accessors

On the path of removing mmio accessors with implicit dev_priv, easy first
step is to remove all such unused macros.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190610120608.15477-1-tvrtko.ursulin@linux.intel.com

drm/i915/perf: fix whitelist on Gen10+

Gen10 added an additional NOA_WRITE register (high bits) and we forgot
to whitelist it for userspace.

Fixes: 95690a02fb5d96 ("drm/i915/perf: enable perf support on CNL")
Signed-off-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Kenneth Graunke <kenneth@whitecape.org>
Link: https://patchwork.freedesktop.org/patch/msgid/20190601225845.12600-1-lionel.g.landwerlin@intel.com

drm/i915: Move i915_check_and_clear_faults to intel_reset.c

The code is logically about reset so it makes sense.

It also enables making i915_clear_error_registers static.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607115932.20271-1-tvrtko.ursulin@linux.intel.com

drm/i915: Grammar s/the its/its/

Fix the grammar.

Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607113118.14645-1-geert+renesas@glider.be

drm/i915/frontbuffer: remove obsolete comment about mark busy/idle

This no longer exists.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606122203.13416-4-jani.nikula@intel.com

drm/i915: move more atomic plane declarations to intel_atomic_plane.h

Some function declarations in intel_drv.h were missed when
intel_atomic_plane.h was created.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606122203.13416-3-jani.nikula@intel.com

drm/i915: remove some unused declarations from intel_drv.h

intel_mark_busy(), intel_mark_idle(), and skl_cdclk_get_vco() no longer
exist.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606122203.13416-2-jani.nikula@intel.com

drm/i915: move pm related declarations to intel_pm.h

Move more missed declarations from i915_drv.h to intel_pm.h.

Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606122203.13416-1-jani.nikula@intel.com

drm/i915/wopcm: update default size for gen11+

The size has been increased to 2MB starting from Gen11. GuC and HuC FWs
fit in 1MB so we were fine even with the legacy define, but let's still
move to the correct one before the blobs grow to avoid being caught off
guard in the future.

v2: return early if the platform doesn't have GuC, fix nits (Michal)

Bspec: 12690
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Stuart Summers <stuart.summers@intel.com>
[ickle: use SZ consistently]
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606224225.14287-2-daniele.ceraolospurio@intel.com

drm/i915/guc: always use Command Transport Buffers

Now that we've moved the Gen9 GuC blobs to version 32 we have CTB
support on all gens, so no need to restrict the usage to Gen11+.
Note that MMIO communication is still required for CTB initialization.

v2: fix commit message nits (Michal)

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Michal Wajdeczko <michal.wajdeczko@intel.com>
Reviewed-by: Michal Wajdeczko <michal.wajdeczko@intel.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606224225.14287-1-daniele.ceraolospurio@intel.com

drm/i915/dsi: Read back pclk set by GOP and use that as pclk (v3)

The GOP sometimes initializes the pclk at a (slightly) different frequency
then the pclk which we've calculated.

This commit makes the DSI code read-back the pclk set by the GOP and
if that is within a reasonable margin of the calculated pclk, uses
that instead.

This fixes the first modeset being a full modeset instead of a
fast modeset on systems where the GOP pclk is different.

Changes in v2:
-Use intel_encoder_current_mode() to get the pclk setup by the GOP

Changes in v3:
-Back to the readback approach, skipping the dsi_pll.ctrl / .dev checks
 in intel_pipe_config_compare() when adjust is set leads to:
 [drm:pipe_config_err [i915]] *ERROR* mismatch in dsi_pll.ctrl (...)
 [drm:pipe_config_err [i915]] *ERROR* mismatch in dsi_pll.div (...)
-Do the readback and pclk overriding from vlv_dsi_init(), rather then from
 intel_dsi_vbt_init() as the vbt code should not be touching the hw

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605181735.7020-3-hdegoede@redhat.com

drm/i915/dsi: Move vlv/icl_dphy_param_init call out of intel_dsi_vbt_init (v2)

The vlv/icl_dphy_param_init calls do various calculations to set dphy
parameters based on the pclk.

Move the calling of vlv/icl_dphy_param_init to vlv_dsi_init to give
vlv_dsi_init a chance to tweak the pclk before these calculations are done.

Changes in v2:
-Also moves the icl and vlv specific dphy_param_init functions from the
 generic intel_dsi_vbt.c file into the icl_ and vlv_dsi.c specific files.

Note icl_dphy_param_init() and vlv_dphy_param_init() are only moved,
otherwise they are completely unchanged.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605181735.7020-2-hdegoede@redhat.com

drm/i915/dsi: Move logging of DSI VBT parameters to a helper function

This is a preparation patch for moving the calling of *_dphy_param_init()
out of intel_dsi_vbt_init.

Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605181735.7020-1-hdegoede@redhat.com

drm/i915/sdvo: Actually print the reason why the SDVO command failed

It's much easier to figure out why the SDVO encoder refuses to cooperate
if we can see what status we got back.

v2: Zero initialize only the first character, not the whole buffer

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk> #v1
Link: https://patchwork.freedesktop.org/patch/msgid/20190410170941.28142-1-ville.syrjala@linux.intel.com

drm/i915/sdvo: Don't write stack garbage into the hbuf

Pass the length returned by hdmi_infoframe_pack_only() to
intel_sdvo_write_infoframe() so that we don't end up writing
stack garbage into the hbuf.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-7-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/sdvo: Don't unpack stack garbage

Pass the length returned by intel_sdvo_read_infoframe() to
hdmi_infoframe_unpack() so that we don't try to unpack any
leftover stack garbage.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-6-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/sdvo: Check that we have space for the infoframe

Before we go writing the infoframe let's make sure we have
the space for it. Not that it really matters since the write
loop would just terminate early in that case.

v2: Check after the debug print and ++ (Chris)

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190410170835.18867-1-ville.syrjala@linux.intel.com
Reviewed-by: Radhakrishna Sripada <radhakrishna.sripada@intel.com>

drm/i915: Rename SDVO_AUDIO_ENABLE to HDMI_AUDIO_ENABLE

The "audio enable" bit on the SDVO/HDMI control register is only meant
for HDMI. Audio is never delivered over the SDVO bus. Rename the define
to reflect this fact.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-4-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915/sdvo: Implement proper HDMI audio support for SDVO

Our SDVO audio support is pretty bogus. We can't push audio over the
SDVO bus, so trying to enable audio in the SDVO control register doesn't
do anything. In fact it looks like the SDVO encoder will always mix in
the audio coming over HDA, and there's no (at least documented) way to
disable that from our side. So HDMI audio does work currently on gen4
but only by luck really. On gen3 it got broken by the referenced commit.
And what has always been missing on every platform is the ELD.

To pass the ELD to the audio driver we need to write it to magic buffer
in the SDVO encoder hardware which then gets pulled out via HDA in the
other end. Ie. pretty much the same thing we had for native HDMI before
we started to just pass the ELD between the drivers. This sort of
explains why we even have that silly hardware buffer with native HDMI.

$ cat /proc/asound/card0/eld#1.0
-monitor_present 0
-eld_valid 0
+monitor_present 1
+eld_valid 1
+monitor_name LG TV
+connection_type HDMI
+...

This also fixes our state readout since we can now query the SDVO
encoder about the state of the "ELD valid" and "presence detect"
bits. As mentioned those don't actually control whether audio
gets sent over the HDMI cable, but it's the best we can do. And with
the state checker appeased we can re-enable HDMI audio for gen3.

Cc: stable@vger.kernel.org
Cc: Daniel Vetter <daniel.vetter@ffwll.ch>
Cc: zardam@gmail.com
Tested-by: zardam@gmail.com
Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=108976
Fixes: de44e256b92c ("drm/i915/sdvo: Shut up state checker with hdmi cards on gen3")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-3-ville.syrjala@linux.intel.com
Reviewed-by: Imre Deak <imre.deak@intel.com>

drm/i915/sdvo: Fix AVI infoframe TX rate readout

The AVI infoframe readout code currently issues a
SDVO_CMD_GET_HBUF_TXRATE before SDVO_CMD_SET_HBUF_INDEX, which is
not the correct order for these two operations. So far this wasn't
a problem since we left the index pointing at the AVI infoframe
buffer at the end of the modeset. However once we start to write
to other buffers (namely ELD) that is no longer going to be true.
Fix up the order so that we always read out the TX rate for the
correct buffer.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190409144054.24561-2-ville.syrjala@linux.intel.com
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>

drm/i915: Fix per-pixel alpha with CCS

We forgot to set .has_alpha=true for the A+CCS formats when the code
started to consult .has_alpha. This manifests as A+CCS being treated
as X+CCS which means no per-pixel alpha blending. Fix the format
list appropriately.

Cc: stable@vger.kernel.org
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Cc: Matt Roper <matthew.d.roper@intel.com>
Cc: Heinrich Fink <heinrich.fink@daqri.com>
Reported-by: Heinrich Fink <heinrich.fink@daqri.com>
Tested-by: Heinrich Fink <heinrich.fink@daqri.com>
Fixes: b20815255693 ("drm/i915: Add plane alpha blending support, v2.")
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190603142500.25680-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Drop pointless WARN_ON

intel_dp_link_down() is static and it's only called from the pre-ddi
DP functions, so having a WARN_ON(HAS_DDI) in there is quite pointless.
Remove it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604140214.9947-2-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Move intel_dp->prepare_link_train assignment into ddi code

It's a bit silly to go through intel_dp.c to assign the
prepare_link_train vfunc for ddi platforms when we can just
assign it directly from intel_ddi.c.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604140214.9947-1-ville.syrjala@linux.intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915: Tidy intel_execlists_submission_init

Get to uncore from the engine for better logic organization and use
already available i915 everywhere.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Suggested-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607084521.16845-2-tvrtko.ursulin@linux.intel.com

drm/i915: Convert some more bits to use engine mmio accessors

Remove a couple dev_priv locals as a consequence.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607084521.16845-1-tvrtko.ursulin@linux.intel.com

drm/i915: Unexport i915_gem_init/fini_aliasing_ppgtt

These two are only used from within i915_gem_gtt.c and can trivially be
made static.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607082557.31670-5-tvrtko.ursulin@linux.intel.com

drm/i915: Extract engine fault reset to a helper

Just tidying the flow a bit.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607082557.31670-4-tvrtko.ursulin@linux.intel.com

drm/i915: Make Gen6/7 RING_FAULT_REG access engine centric

Similar to earlier conversions, eliminate the implicit dev_priv by
introducing some helpers which take the engine parameter (since the
register itself is per engine).

v2:
 * Always use parentheses in macro arguments.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607101535.767-1-tvrtko.ursulin@linux.intel.com

drm/i915: Tidy engine mask types in hangcheck

We can use intel_engine_mask_t to align with the rest of the codebase.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607082557.31670-2-tvrtko.ursulin@linux.intel.com

drm/i915: Reset only affected engines when handling error capture

Pass down the engine mask to i915_clear_error_registers so only affected
engines can be reset on the Gen6/7 path.

Signed-off-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190607082557.31670-1-tvrtko.ursulin@linux.intel.com

drm/i915/dmc: protect against reading random memory

While loading the DMC firmware we were double checking the headers made
sense, but in no place we checked that we were actually reading memory
we were supposed to. This could be wrong in case the firmware file is
truncated or malformed.

Before this patch:
# ls -l /lib/firmware/i915/icl_dmc_ver1_07.bin
-rw-r--r-- 1 root root  25716 Feb  1 12:26 icl_dmc_ver1_07.bin
# truncate -s 25700 /lib/firmware/i915/icl_dmc_ver1_07.bin
# modprobe i915
# dmesg| grep -i dmc
[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
[drm] Finished loading DMC firmware i915/icl_dmc_ver1_07.bin (v1.7)

i.e. it loads random data. Now it fails like below:
[drm:intel_csr_ucode_init [i915]] Loading i915/icl_dmc_ver1_07.bin
[drm:csr_load_work_fn [i915]] *ERROR* Truncated DMC firmware, rejecting.
i915 0000:00:02.0: Failed to load DMC firmware i915/icl_dmc_ver1_07.bin. Disabling runtime power management.
i915 0000:00:02.0: DMC firmware homepage: https://git.kernel.org/pub/scm/linux/kernel/git/firmware/linux-firmware.git/tree/i915

Before reading any part of the firmware file, validate the input first.

Fixes: eb805623d8b1 ("drm/i915/skl: Add support to load SKL CSR firmware.")
Cc: stable@vger.kernel.org
Signed-off-by: Lucas De Marchi <lucas.demarchi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605235535.17791-1-lucas.demarchi@intel.com

drm/i915: Report an earlier wedged event when suspending the engines

On i915_gem_load_power_context() we do care whether or not we succeed in
completing the switch back to the kernel context (via idling the
engines). Currently, we detect if an error occurs while we wait, but we
do not report one if it occurred beforehand (and the status of the
switch is undefined). Check the current terminally wedged status on
entering the wait, and report it after flushing the requests, as if it
had occurred during our own wait.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110824
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531113245.30042-1-chris@chris-wilson.co.uk

drm/i915: Skip context_barrier emission for unused contexts

The intent was to skip unused HW contexts by checking ce->state.
However, this only works for execlists where the ppGTT pointers is
stored inside the HW context. For gen7, the ppGTT is alongside the
logical state and must be updated on all active engines but, crucially,
only on active engines. As we need different checks, and to keep
context_barrier_task() agnostic, pass in the predicate.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110836
Fixes: 62c8e423450d ("drm/i915: Skip unused contexts for context_barrier_task()")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Tvrtko Ursulin <tvrtko.ursulin@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604152408.24468-1-chris@chris-wilson.co.uk

drm/i915: Move object close under its own lock

Use i915_gem_object_lock() to guard the LUT and active reference to
allow us to break free of struct_mutex for handling GEM_CLOSE.

Testcase: igt/gem_close_race
Testcase: igt/gem_exec_parallel
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190606112320.9704-1-chris@chris-wilson.co.uk

drm/i915: fix documentation build warnings

Just a straightforward bag of fixes for a clean htmldocs build.

Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605095657.23601-2-jani.nikula@intel.com

Documentation/i915: Fix kernel-doc references to moved gem files

The error messages could be more descriptive, but fix these caused by
file moves:

WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -internal
    ./drivers/gpu/drm/i915/i915_gem_shrinker.c' failed with return code 2
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -function
    User command execution ./drivers/gpu/drm/i915/i915_gem_execbuffer.c'
    failed with return code 1
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -internal
    ./drivers/gpu/drm/i915/i915_gem_tiling.c' failed with return code 2
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -function
    buffer object tiling ./drivers/gpu/drm/i915/i915_gem_tiling.c'
    failed with return code 1

Fixes: 10be98a77c55 ("drm/i915: Move more GEM objects under gem/")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605095657.23601-1-jani.nikula@intel.com

drm/i915/ehl: Support HBR3 on EHL combo PHY

Unlike ICL, EHL's combo PHYs can support HBR3 data rates.  Note that
this just extends the upper limit; we will continue to honor the max
data rate specified in the VBT in cases where it is lower than HBR3.

Signed-off-by: Matt Roper <matthew.d.roper@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190605211832.23945-1-matthew.d.roper@intel.com
Reviewed-by: Manasi Navare <manasi.d.navare@intel.com>

drm/i915/dsi: Use a fuzzy check for burst mode clock check

Prior to this commit we fail to init the DSI panel on the GPD MicroPC:
https://www.indiegogo.com/projects/gpd-micropc-6-inch-handheld-industry-laptop#/

The problem is intel_dsi_vbt_init() failing with the following error:
*ERROR* Burst mode freq is less than computed

The pclk in the VBT panel modeline is 70000, together with 24 bpp and
4 lines this results in a bitrate value of 70000 * 24 / 4 = 420000.
But the target_burst_mode_freq in the VBT is 418000.

This commit works around this problem by adding an intel_fuzzy_clock_check
when target_burst_mode_freq < bitrate and setting target_burst_mode_freq to
bitrate when that checks succeeds, fixing the panel not working.

Cc: stable@vger.kernel.org
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Hans de Goede <hdegoede@redhat.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524174028.21659-2-hdegoede@redhat.com

drm/i915/bios: add an enum for BDB block IDs

Better grouping, better semantics for find_section(). No functional
changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/192cc8a45cb5c36ccbde25a725df135793a4263f.1559308269.git.jani.nikula@intel.com

drm/i915/bios: add more LFP options

Add new fields in the LFP block. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/9a7f41aab894d7e96d8ad4776cf14f94cfd17d04.1559308269.git.jani.nikula@intel.com

drm/i915/bios: add VBT swing bit to child device definition

New bit to look in another BDB block for more. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/7ab46e3f53fd2c12cb60b9eabbebb65b27004a9e.1559308269.git.jani.nikula@intel.com

drm/i915/bios: sort BDB block definitions using block ID

Make it easier to find the right blocks. No functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/56e1989940d83a670d087d531b7b6aa5dc4c0228.1559308269.git.jani.nikula@intel.com

drm/i915/bios: add BDB block comments before definitions

Use the comments verbatim from the spec to help find the right block. No
functional changes.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/52c32be96bd605d7a9f94accbd4dbe7718849f93.1559308269.git.jani.nikula@intel.com

drm/i915/bios: reserve struct bdb_ prefix for BDB blocks

Don't use bdb_ prefixes for structs within blocks. Add a new bdb struct
for SDVO panel DTDs for completeness.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/cd062ced1bbbe07e087212b42c83e5ac64a22a49.1559308269.git.jani.nikula@intel.com

drm/i915/bios: remove unused, obsolete VBT definitions

We've carried this baggage for more than a decade. Time to let it go.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/00058e6507aa7a62fce1d2a6de223cbbfabb204b.1559308269.git.jani.nikula@intel.com

drm/i915/bios: clean up VBT port info debug logging

Change the order, add some stylistic touches, and add LSPCON.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/3c9aaedcacaeaca24b2a35bf2af680dd118823d4.1559308269.git.jani.nikula@intel.com

drm/i915/bios: use port info child pointer to determine LSPCON presence

Avoid iterating the child devices. This should be a non-functional
change, but theoretically this might enable LSPCON on some extra ports
with buggy VBTs.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/4bbaff16abb3461ccb67abf1537f68bb50823390.1559308269.git.jani.nikula@intel.com

drm/i915/bios: use port info child pointer to determine HPD invert

Avoid iterating the child devices.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/841c226efa424701161dd9f1793e0cf96b45a07c.1559308269.git.jani.nikula@intel.com

drm/i915/bios: refactor DDC pin and AUX CH sanitize functions

Add separate functions to get the port by DDC pin and AUX channel.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/a8b4afc08dd03e08c1403531e7f5ab33d777b1db.1559308269.git.jani.nikula@intel.com

drm/i915/bios: store child device pointer in DDI port info

This allows us to avoid iterating the child devices in some cases.

Also replace the presence bit with child device being non-NULL, and set
the child device pointer last to allow us to take advantage of it in
follow-up work.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/ceccb75d637af3134d0328d67cbd6623932f94db.1559308269.git.jani.nikula@intel.com

drm/i915/bios: make child device order the priority order

Make the child device order the priority order in sanitizing DDC pin and
AUX CH. First come, first served.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/34ab98880386a095422521ad39f4c080eeb3989a.1559308269.git.jani.nikula@intel.com

drm/i915: Enable intel_color_get_config()

In this patch, intel_color_get_config() is enabled and support
for read_luts() will be added platform by platform incrementally
in the follow-up patches.

v4: -Renamed intel_get_color_config to intel_color_get_config [Jani]
    -Added the user early on such that support for get_color_config()
     can be added platform by platform incrementally [Jani]
v5: -Incorrect place for calling intel_color_get_config() in
     haswell_get_pipe_config() [Ville]
v6: -Renamed intel_color_read_luts() to intel_color_get_config()
     [Jani and Ville]

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1559123462-7343-3-git-send-email-swati2.sharma@intel.com

drm/i915: Introduce vfunc read_luts() to create hw lut

In this patch, a vfunc read_luts() is introduced to create a hw lut
i.e. lut having values read from gamma/degamma registers which will
later be used to compare with sw lut to validate gamma/degamma lut values.

v3: -Rebase
v4: -Renamed intel_get_color_config to intel_color_get_config [Jani]
    -Wrapped get_color_config() [Jani]
v5: -Renamed intel_color_get_config() to intel_color_read_luts()
    -Renamed get_color_config to read_luts
v6: -Renamed intel_color_read_luts() back to intel_color_get_config()
     [Jani and Ville]

Signed-off-by: Swati Sharma <swati2.sharma@intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/1559123462-7343-2-git-send-email-swati2.sharma@intel.com

Documentation/i915: Fix references to renamed files

WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -function Hardware workarounds ./drivers/gpu/drm/i915/intel_workarounds.c' failed with return code 1
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -function Logical Rings, Logical Ring Contexts and Execlists ./drivers/gpu/drm/i915/intel_lrc.c' failed with return code 1
WARNING: kernel-doc './scripts/kernel-doc -rst -enable-lineno -internal ./drivers/gpu/drm/i915/intel_lrc.c' failed with return code 2

Fixes: 112ed2d31a46 ("drm/i915: Move GraphicsTechnology files under gt/")
Signed-off-by: Mauro Carvalho Chehab <mchehab+samsung@kernel.org>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/bd7dd29b9fb2101c954c8cfb2c3b4efc7d277045.1559656538.git.mchehab+samsung@kernel.org

drm/i915/gtt: Replace struct_mutex serialisation for allocation

Instead of relying on the caller holding struct_mutex across the
allocation, push the allocation under a tree of spinlocks stored inside
the page tables. Not only should this allow us to avoid struct_mutex
here, but it will allow multiple users to lock independent ranges for
concurrent allocations, and operate independently. This is vital for
pushing the GTT manipulation into a background thread where dependency
on struct_mutex is verboten, and for allowing other callers to avoid
struct_mutex altogether.

v2: Restore lost GEM_BUG_ON for removing too many PTE from
gen6_ppgtt_clear_range.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Acked-by: Mika Kuoppala <mika.kuoppala@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604153830.19096-1-chris@chris-wilson.co.uk

drm/i915: Use unchecked uncore writes to flush the GTT

As the GTT is outside of the powerwell, we can simplify flushing the
GGTT writes by using an unchecked mmio write and post.

v2: s/unc/uncore/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604120022.20472-3-chris@chris-wilson.co.uk

drm/i915: Use unchecked writes for setting up the fences

As the fence registers are not part of the engine powerwells, we do not
need to fiddle with forcewake in order to update a fence. Avoid using
the heavyweight debug checking normal mmio writes as the checking
dominates the selftest runtime and is superfluous!

In the process, retire the I915_WRITE() implicit macro with the new
intel_uncore_write interface.

v2: s/unc/uncore/

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604120022.20472-2-chris@chris-wilson.co.uk

drm/i915/selftests: Flush partial-tiling object once

We only need to flush the object once prior to starting the partial
tiling test as inside the test we explicitly maintain coherency.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190604120022.20472-1-chris@chris-wilson.co.uk

drm/i915: Fix plane state dumps

Stop dumping plane->state for planes. That is the old state most of the
time and dumping stale information only serves to confuse people.
Instead dump the new state just for the planes included in the
operation. For now we'll include only the planes for the modeset/fastset
pipes in the dumps. But probably we want to dump them all eventually,
just not quite sure how to present that information nicely to the user.

And while at it let's dump a few more interesting bits from the state.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-14-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Make state dumpers take a const state

Constify a bunch of the arguments of various state dumping
functions. Makes it clear they don't mutate the states.
And fix up some indent fails while at it.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-13-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Dump failed crtc states during atomic check

Currently we're only dumping the failed crtc state if
intel_modeset_pipe_config() fails. Let's do the state
dump if anything else fails afterwards. The downside
is that we lose the immediate knowledge which crtc caused
the failure (unless a lower level function indicates it
with an additional debug print) but having the full state
dumped seems like something that could be beneficial.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-12-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Include crtc_state.active in crtc state dumps

Currently we're not dumping out whether the crtc is actually
active or in dpms off state. Let's include that in the dumps.
And while at it compress out a few lines from the state dump.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-11-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Move state dump to the end of atomic_check()

Currently we're dumping the crtc states before they have
been fully calculated. Move the dumping to the end of
.atomic_check() so we get a fully up to date dump.

Let's also do the dump for fully disabled pipes, but we'll
limit that to just saying that the pipe is disabled since
the rest of the state is going to be nonsense in that case.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-10-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Use intel_ types in intel_atomic_check()

Switch to using intel_ types instead of drm_ types. Avoids
ugly casts and nasty aliasing variables with different types.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-9-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Use intel_ types in intel_modeset_checks()

Switch to using intel_ types instead of drm_ types. Avoids
ugly casts and nasty aliasing variables with different types.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-8-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Don't pass the crtc to intel_modeset_pipe_config()

We already pass the crtc's state to intel_modeset_pipe_config()
so passing the crtc as well is redundant.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-7-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Don't pass the crtc to intel_dump_pipe_config()

We already pass the crtc's state to intel_dump_pipe_config()
so passing the crtc as well is redundant.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-6-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Use intel_ types in haswell_mode_set_planes_workaround()

Pass around intel_atomic_state rather than drm_atomic_state.
This avoids some extra casts and annoing aliasing variables.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-5-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Use intel_ types in intel_modeset_clear_plls()

Pass around intel_atomic_state rather than drm_atomic_state.
This avoids some extra casts and annoing aliasing variables.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-4-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Pass intel_atomic state to check_digital_port_conflicts()

Pass around intel_atomic_state rather than drm_atomic_state.
This avoids some extra casts and annoing aliasing variables.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-3-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Clean up cdclk vfunc assignments

Thanks to using the short names for platoforms all the cdclk
vfunc assignemtns now fit within 80 cols. Remove the extra
line wraps.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-2-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: Pass intel_atomic_state to cdclk funcs

Pass around intel_atomic_state rather than drm_atomic_state.
This avoids some extra casts and annoing aliasing variables.

Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190517193132.8140-1-ville.syrjala@linux.intel.com
Reviewed-by: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>

drm/i915: add i2c symlink under hdmi connector

Currently, the i2c adapter is available only under DP connectors.

Add i2c symlink under hdmi connector pointing to i2c adapter in order to
make this behaviour consistent.

The initial motivation was to make igt i2c subtest
patch [1] work on all connectors.

[1]: https://patchwork.freedesktop.org/series/60357/

v2:
- Moved symlink remove to unregister (Ville)
- Clarified commit message (Jani)
- Changed WARN to DRM_ERROR (Jani)
- Minor codestyle changes proposed by Jani

v3: added blank line

Cc: Arkadiusz Hiler <arkadiusz.hiler@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Signed-off-by: Oleg Vasilev <oleg.vasilev@intel.com>
Signed-off-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190520150642.3477-1-oleg.vasilev@intel.com

drm/i915: move more defs in intel_display_power.h

Move over structures, enums and macros from intel_display.h and
i915_drv.h to have all the display PM defines in the same header.

Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531222409.9177-3-daniele.ceraolospurio@intel.com

drm/i915: extract intel_display_power.h/c from intel_runtime_pm.h/c

Keep all the device-level PM management in intel_runtime_pm.h/c and move
all the display specific bits into their own file. Also add the new
header to Makefile.header-test.

Apart from the giant code move, the only difference is with the
intel_runtime_<get/put>_raw() functions, which are now exposed in the
header. The _put() version is also not conditionally compiled anymore
since it is ok to always pass the wakeref taken from the _get() to
__intel_runtime_pm_put (it is -1 if tracking is disabled).

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Imre Deak <imre.deak@intel.com>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Jani Nikula <jani.nikula@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531222409.9177-2-daniele.ceraolospurio@intel.com

drm/i915/icl: Ensure port A combo PHY HW state is correct

Make sure the HW state of the port A combo PHY is correct wrt. the
IREFGEN setting. This will force a reprogramming during init or a WARN
during uninit if the setting is incorrect.

On my ICL RVP I haven't seen this check failing and leading to a forced
reinit/WARN, but let's add it still for consistency.

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Signed-off-by: Imre Deak <imre.deak@intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531082626.30640-1-imre.deak@intel.com

drm/i915: Report all objects with allocated pages to the shrinker

Currently, we try to report to the shrinker the precise number of
objects (pages) that are available to be reaped at this moment. This
requires searching all objects with allocated pages to see if they
fulfill the search criteria, and this count is performed quite
frequently. (The shrinker tries to free ~128 pages on each invocation,
before which we count all the objects; counting takes longer than
unbinding the objects!) If we take the pragmatic view that with
sufficient desire, all objects are eventually reapable (they become
inactive, or no longer used as framebuffer etc), we can simply return
the count of pinned pages maintained during get_pages/put_pages rather
than walk the lists every time.

The downside is that we may (slightly) over-report the number of
objects/pages we could shrink and so penalize ourselves by shrinking
more than required. This is mitigated by keeping the order in which we
shrink objects such that we avoid penalizing active and frequently used
objects, and if memory is so tight that we need to free them we would
need to anyway.

v2: Only expose shrinkable objects to the shrinker; a small reduction in
not considering stolen and foreign objects.
v3: Restore the tracking from a "backup" copy from before the gem/ split

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530203500.26272-2-chris@chris-wilson.co.uk

drm/i915: Track the purgeable objects on a separate eviction list

Currently the purgeable objects, I915_MADV_DONTNEED, are mixed in the
normal bound/unbound lists. Every shrinker pass starts with an attempt
to purge from this set of unneeded objects, which entails us doing a
walk over both lists looking for any candidates. If there are none, and
since we are shrinking we can reasonably assume that the lists are
full!, this becomes a very slow futile walk.

If we separate out the purgeable objects into own list, this search then
becomes its own phase that is preferentially handled during shrinking.
Instead the cost becomes that we then need to filter the purgeable list
if we want to distinguish between bound and unbound objects.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Matthew Auld <matthew.william.auld@gmail.com>
Reviewed-by: Matthew Auld <matthew.william.auld@gmail.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530203500.26272-1-chris@chris-wilson.co.uk

drm/i915: add force_probe module parameter to replace alpha_support

The i915.alpha_support module parameter has caused some confusion along
the way. Add new i915.force_probe parameter to specify PCI IDs of
devices to probe, when the devices are recognized but not automatically
probed by the driver. The name is intended to reflect what the parameter
effectively does, avoiding any overloaded semantics of "alpha" and
"support".

The parameter supports "" to disable, "<pci-id>,[<pci-id>,...]" to
enable force probe for one or more devices, and "*" to enable force
probe for all known devices.

Also add new CONFIG_DRM_I915_FORCE_PROBE config option to replace the
DRM_I915_ALPHA_SUPPORT option. This defaults to "*" if
DRM_I915_ALPHA_SUPPORT=y.

Instead of replacing i915.alpha_support immediately, let the two coexist
for a while, with a deprecation message, for a transition period.

Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Rodrigo Vivi <rodrigo.vivi@intel.com>
Reviewed-by: Rodrigo Vivi <rodrigo.vivi@intel.com>
Acked-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190506134801.28751-1-jani.nikula@intel.com

drm/i915: fix use of uninitialized pointer vaddr

The assignment of err is using the incorrect pointer vaddr that has
not been initialized. Fix this by using the correct pointer obj instead.

Addresses-Coverity: ("Uninitialized pointer read")
Fixes: 6501aa4e3a45 ("drm/i915: add in-kernel blitter client")
Signed-off-by: Colin Ian King <colin.king@canonical.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190531103201.10124-1-colin.king@canonical.com

drm/i915: Make default value for i915.mmio_debug a compile time option

The normal behaviour is to periodically check for a mmio access error,
and once detected enable mmio access checking. However this is useless
if the error only occurs once during module load, and so we may miss
such errors in CI. To allow ourselves to catch them, allow CI to opt into
always enabling mmio debugging.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@intel.com>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530121311.6794-1-chris@chris-wilson.co.uk

drm/i915: Drop check for non-NULL entry in llist_for_each_entry_safe

Since the next entry is an offset from a pointer, it can not be NULL.
For simplicity, drop the extra conditional before calling cond_resched()

Reported-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Reviewed-by: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530082358.13663-1-chris@chris-wilson.co.uk

drm/i915: Split off pci_driver.remove() tail to drm_driver.release()

In order to support driver hot unbind, some cleanup operations, now
performed on PCI driver remove, must be called later, after all device
file descriptors are closed.

Split out those operations from the tail of pci_driver.remove()
callback and put them into drm_driver.release() which is called as soon
as all references to the driver are put.  As a result, those cleanups
will be now run on last drm_dev_put(), either still called from
pci_driver.remove() if all device file descriptors are already closed,
or on last drm_release() file operation.

Signed-off-by: Janusz Krzysztofik <janusz.krzysztofik@linux.intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190530133105.30467-1-janusz.krzysztofik@linux.intel.com

drm/i915: add in-kernel blitter client

The plan is to use the blitter engine for async object clearing when
using local memory, but before we can move the worker to get_pages() we
have to first tame some more of our struct_mutex usage. With this in
mind we should be able to upstream the object clearing as some
selftests, which should serve as a guinea pig for the ongoing locking
rework and upcoming async get_pages() framework.

Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Cc: CQ Tang <cq.tang@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529123108.24422-2-matthew.auld@intel.com

drm/i915/gtt: grab wakeref in gen6_alloc_va_range

Some steps in gen6_alloc_va_range require the HW to be awake, so ideally
we should be grabbing the wakeref ourselves and not relying on the
caller already holding it for us.

Suggested-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Matthew Auld <matthew.auld@intel.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529123108.24422-1-matthew.auld@intel.com

drm/i915/gtt: Avoid overflowing the WC stash

An interesting issue cropped with making the pagetables be allocated and
freed concurrently (i.e. removing their grandeous struct_mutex guard)
was that we would overflow the page stash. This happens when we have
multiple allocators grabbing WC pages such that we fill the vm's local
page stash and then when we free another page, the page stash is already
full and we overflow.

The fix is quite simple: to check for a full page stash before adding
another. This results in us keeping a vm local page stash around for
much longer, which is both a blessing and a curse.

Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Matthew Auld <matthew.auld@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Reviewed-by: Matthew Auld <matthew.auld@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529093407.31697-1-chris@chris-wilson.co.uk

Revert "drm/i915: Expand subslice mask"

This reverts commit 1ac159e23c2c ("drm/i915: Expand subslice mask"),
which kills ICL due to GEM_BUG_ON() sanity checks before CI even gets a
chance to do anything.

The commit exposes an issue in commit 1e40d4aea57b ("drm/i915/cnl:
Implement WaProgramMgsrForCorrectSliceSpecificMmioReads"), which will
also need to be addressed.

There's a proposed fix [1], but considering the seeming uncertainty with
the fix as well as the size of the regressing commit (in this context,
the one that actually brings down ICL), this warrants a revert to get
ICL working, and gives us time to get all of this right without
rushing. Even if this means shooting the messenger.

<3>[    9.426327] intel_sseu_get_subslices:46 GEM_BUG_ON(slice >= sseu->max_slices)
<4>[    9.426355] ------------[ cut here ]------------
<2>[    9.426357] kernel BUG at drivers/gpu/drm/i915/gt/intel_sseu.c:46!
<4>[    9.426371] invalid opcode: 0000 [#1] PREEMPT SMP NOPTI
<4>[    9.426377] CPU: 1 PID: 364 Comm: systemd-udevd Not tainted 5.2.0-rc2-CI-CI_DRM_6159+ #1
<4>[    9.426385] Hardware name: Intel Corporation Ice Lake Client Platform/IceLake U DDR4 SODIMM PD RVP TLC, BIOS ICLSFWR1.R00.3183.A00.1905020411 05/02/2019
<4>[    9.426444] RIP: 0010:intel_sseu_get_subslices+0x8a/0xe0 [i915]
<4>[    9.426452] Code: d5 76 b7 e0 48 8b 35 9d 24 21 00 49 c7 c0 07 f0 72 a0 b9 2e 00 00 00 48 c7 c2 00 8e 6d a0 48 c7 c7 a5 14 5b a0 e8 36 3c be e0 <0f> 0b 48 c7 c1 80 d5 6f a0 ba 30 00 00 00 48 c7 c6 00 8e 6d a0 48
<4>[    9.426468] RSP: 0018:ffffc9000037b9c8 EFLAGS: 00010282
<4>[    9.426475] RAX: 000000000000000f RBX: 0000000000000000 RCX: 0000000000000000
<4>[    9.426482] RDX: 0000000000000001 RSI: 0000000000000008 RDI: ffff88849e346f98
<4>[    9.426490] RBP: ffff88848a200000 R08: 0000000000000004 R09: ffff88849d50b000
<4>[    9.426497] R10: 0000000000000000 R11: ffff88849e346f98 R12: ffff88848a209e78
<4>[    9.426505] R13: 0000000003000000 R14: ffff88848a20b1a8 R15: 0000000000000000
<4>[    9.426513] FS:  00007f73d5ae8680(0000) GS:ffff88849fc80000(0000) knlGS:0000000000000000
<4>[    9.426521] CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
<4>[    9.426527] CR2: 0000561417b01260 CR3: 0000000494764003 CR4: 0000000000760ee0
<4>[    9.426535] PKRU: 55555554
<4>[    9.426538] Call Trace:
<4>[    9.426585]  wa_init_mcr+0xd5/0x110 [i915]
<4>[    9.426597]  ? lock_acquire+0xa6/0x1c0
<4>[    9.426645]  icl_gt_workarounds_init+0x21/0x1a0 [i915]
<4>[    9.426694]  ? i915_driver_load+0xfcf/0x18a0 [i915]
<4>[    9.426739]  gt_init_workarounds+0x14c/0x230 [i915]
<4>[    9.426748]  ? _raw_spin_unlock_irq+0x24/0x50
<4>[    9.426789]  intel_gt_init_workarounds+0x1b/0x30 [i915]
<4>[    9.426835]  i915_driver_load+0xfd7/0x18a0 [i915]
<4>[    9.426843]  ? lock_acquire+0xa6/0x1c0
<4>[    9.426850]  ? __pm_runtime_resume+0x4f/0x80
<4>[    9.426857]  ? _raw_spin_unlock_irqrestore+0x4c/0x60
<4>[    9.426863]  ? _raw_spin_unlock_irqrestore+0x4c/0x60
<4>[    9.426870]  ? lockdep_hardirqs_on+0xe3/0x1b0
<4>[    9.426915]  i915_pci_probe+0x29/0xa0 [i915]
<4>[    9.426923]  pci_device_probe+0x9e/0x120
<4>[    9.426930]  really_probe+0xea/0x3c0
<4>[    9.426936]  driver_probe_device+0x10b/0x120
<4>[    9.426942]  device_driver_attach+0x4a/0x50
<4>[    9.426948]  __driver_attach+0x97/0x130
<4>[    9.426954]  ? device_driver_attach+0x50/0x50
<4>[    9.426960]  bus_for_each_dev+0x74/0xc0
<4>[    9.426966]  bus_add_driver+0x13f/0x210
<4>[    9.426971]  ? 0xffffffffa083b000
<4>[    9.426976]  driver_register+0x56/0xe0
<4>[    9.426982]  ? 0xffffffffa083b000
<4>[    9.426987]  do_one_initcall+0x58/0x300
<4>[    9.426994]  ? do_init_module+0x1d/0x1f6
<4>[    9.427001]  ? rcu_read_lock_sched_held+0x6f/0x80
<4>[    9.427007]  ? kmem_cache_alloc_trace+0x261/0x290
<4>[    9.427014]  do_init_module+0x56/0x1f6
<4>[    9.427020]  load_module+0x24d1/0x2990
<4>[    9.427032]  ? __se_sys_finit_module+0xd3/0xf0
<4>[    9.427037]  __se_sys_finit_module+0xd3/0xf0
<4>[    9.427047]  do_syscall_64+0x55/0x1c0
<4>[    9.427053]  entry_SYSCALL_64_after_hwframe+0x49/0xbe
<4>[    9.427059] RIP: 0033:0x7f73d5609839
<4>[    9.427064] Code: 00 f3 c3 66 2e 0f 1f 84 00 00 00 00 00 0f 1f 40 00 48 89 f8 48 89 f7 48 89 d6 48 89 ca 4d 89 c2 4d 89 c8 4c 8b 4c 24 08 0f 05 <48> 3d 01 f0 ff ff 73 01 c3 48 8b 0d 1f f6 2c 00 f7 d8 64 89 01 48
<4>[    9.427082] RSP: 002b:00007ffdf34477b8 EFLAGS: 00000246 ORIG_RAX: 0000000000000139
<4>[    9.427091] RAX: ffffffffffffffda RBX: 00005559fd5d7b40 RCX: 00007f73d5609839
<4>[    9.427099] RDX: 0000000000000000 RSI: 00007f73d52e8145 RDI: 000000000000000f
<4>[    9.427106] RBP: 00007f73d52e8145 R08: 0000000000000000 R09: 00007ffdf34478d0
<4>[    9.427114] R10: 000000000000000f R11: 0000000000000246 R12: 0000000000000000
<4>[    9.427121] R13: 00005559fd5c90f0 R14: 0000000000020000 R15: 00005559fd5d7b40
<4>[    9.427131] Modules linked in: i915(+) mei_hdcp x86_pkg_temp_thermal coretemp snd_hda_intel crct10dif_pclmul crc32_pclmul snd_hda_codec snd_hwdep e1000e snd_hda_core ghash_clmulni_intel ptp snd_pcm cdc_ether usbnet mii pps_core mei_me mei prime_numbers btusb btrtl btbcm btintel bluetooth ecdh_generic ecc
<4>[    9.427254] ---[ end trace af3eeb543bd66e66 ]---

[1] http://patchwork.freedesktop.org/patch/msgid/20190528200655.11605-1-chris@chris-wilson.co.uk

References: https://intel-gfx-ci.01.org/tree/drm-tip/CI_DRM_6159/fi-icl-u2/pstore0-1517155098_Oops_1.log
References: 1e40d4aea57b ("drm/i915/cnl: Implement WaProgramMgsrForCorrectSliceSpecificMmioReads")
Fixes: 1ac159e23c2c ("drm/i915: Expand subslice mask")
Cc: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Joonas Lahtinen <joonas.lahtinen@linux.intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Cc: Manasi Navare <manasi.d.navare@intel.com>
Cc: Michel Thierry <michel.thierry@intel.com>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Cc: Oscar Mateo <oscar.mateo@intel.com>
Cc: Stuart Summers <stuart.summers@intel.com>
Cc: Tvrtko Ursulin <tvrtko.ursulin@linux.intel.com>
Cc: Yunwei Zhang <yunwei.zhang@intel.com>
Acked-by: Daniel Vetter <daniel@ffwll.ch>
Signed-off-by: Jani Nikula <jani.nikula@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529082150.31526-1-jani.nikula@intel.com

drm/i915: Avoid refcount_inc on known zero count

In intel_wakeref_auto, we use refcount_inc_not_zero to detect the first
use and initialise the timer. On doing so, we have to avoid using
refcount_inc on that zero count as the debug code flags that as an
error:
refcount_t: increment on 0; use-after-free.

Rearrange the code so that if we know the count is 0 and we are
initialising, we explicitly set it to 1.

Fixes: b27e35ae5b18 ("drm/i915: Keep user GGTT alive for a minimum of 250ms")
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Reviewed-by: Mika Kuoppala <mika.kuoppala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528154053.22004-1-chris@chris-wilson.co.uk

drm/i915: selftest_lrc: Check the correct variable

We should check "request[n]" instead of just "request".

Fixes: 78e41ddd2198 ("drm/i915: Apply an execution_mask to the virtual_engine")
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Reviewed-by: Chris Wilson <chris@chris-wilson.co.uk>
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Link: https://patchwork.freedesktop.org/patch/msgid/20190529110355.GA19119@mwanda

drm/i915: Take a runtime pm wakeref for atomic commits

Before we start prepping the system for an atomic modeset, wake the
device up. We then keep track of this wakeref until we complete the
atomic commit, so we hold keep the device awake for all potential HW
access, and do not allow the device to sleep with a pending modeset.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=110771
Signed-off-by: Chris Wilson <chris@chris-wilson.co.uk>
Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Maarten Lankhorst <maarten.lankhorst@linux.intel.com>
Reviewed-by: Ville Syrjälä <ville.syrjala@linux.intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190528075354.22341-1-chris@chris-wilson.co.uk

drm/i915: Expand subslice mask

Currently, the subslice_mask runtime parameter is stored as an
array of subslices per slice. Expand the subslice mask array to
better match what is presented to userspace through the
I915_QUERY_TOPOLOGY_INFO ioctl. The index into this array is
then calculated:
  slice * subslice stride + subslice index / 8

v2: fix spacing in set_sseu_info args
    use set_sseu_info to initialize sseu data when building
    device status in debugfs
    rename variables in intel_engine_types.h to avoid checkpatch
    warnings
v3: update headers in intel_sseu.h
v4: add const to some sseu_dev_info variables
    use sseu->eu_stride for EU stride calculations
v5: address review comments from Tvrtko and Daniele
v6: remove extra space in intel_sseu_get_subslices
    return the correct subslice enable in for_each_instdone
    add GEM_BUG_ON to ensure user doesn't pass invalid ss_mask size
    use printk formatted string for subslice mask
v7: remove string.h header and rebase

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Cc: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Acked-by: Lionel Landwerlin <lionel.g.landwerlin@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-6-stuart.summers@intel.com

drm/i915: Refactor sseu helper functions

Move functions to intel_sseu.h and remove inline qualifier.
Additionally, ensure these are all prefixed with intel_sseu_*
to match the convention of other functions in i915.

v2: fix spacing from checkpatch warning
v3: squash helper function changes into a single patch
    break 80 character line to fix checkpatch warning
    move get/set_eus helpers to intel_device_info.c
v4: Remove intel_ prefix from static functions in
    intel_device_info.c and correctly copy changes
    to stride calculation in those functions.

Acked-by: Jani Nikula <jani.nikula@intel.com>
Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-5-stuart.summers@intel.com

drm/i915: Move calculation of subslices per slice to new function

Add a new function to return the number of subslices per slice to
consolidate code usage.

v2: rebase on changes to move sseu struct to intel_sseu.h
v3: add intel_* prefix to sseu_subslices_per_slice

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-4-stuart.summers@intel.com

drm/i915: Add macro for SSEU stride calculation

Subslice stride and EU stride are calculated multiple times in
i915_query. Move this calculation to a macro to reduce code duplication.

v2: update headers in intel_sseu.h
v3: use GEN_SSEU_STRIDE for stride calculations in intel_sseu.h
    apply s/bits/max_entries/ to GEN_SSEU_STRIDE parameter

Cc: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Reviewed-by: Daniele Ceraolo Spurio <daniele.ceraolospurio@intel.com>
Signed-off-by: Stuart Summers <stuart.summers@intel.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
Link: https://patchwork.freedesktop.org/patch/msgid/20190524154022.13575-3-stuart.summers@intel.com