Maxim Anisimov [Sun, 10 Dec 2023 15:40:39 +0000 (16:40 +0100)]
ramips: dts: mt7628an: reset FE and ESW cores together
Failing to do so will cause the DMA engine to not initialize properly
and fail to forward packets between them, and in some cases will cause
spurious transmission with size exceeding allowed packet size, causing a
kernel panic.
Fixes: 60fadae62b64 ("ramips: ethernet: ralink: move reset of the esw into the esw instead of fe")
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
[Provide commit description, split into logical changes]
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Lech Perczak [Mon, 11 Dec 2023 23:25:02 +0000 (00:25 +0100)]
ramips: dts: rt5350: reset FE and ESW cores together
Failing to do so will cause the DMA engine to not initialize properly
and fail to forward packets between them, and in some cases will cause
spurious transmission with size exceeding allowed packet size, causing a
kernel panic.
This is behaviour of downstream driver as well, however I
haven't observed bug reports about this SoC in the wild, so this
commit's purpose is to align this chip with all other SoC's - MT7620
were already using this arrangement.
Fixes: #9284
Fixes: 60fadae62b64 ("ramips: ethernet: ralink: move reset of the esw into the esw instead of fe")
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Lech Perczak [Mon, 11 Dec 2023 23:22:04 +0000 (00:22 +0100)]
ramips: dts: rt3050: reset FE and ESW cores together
Failing to do so will cause the DMA engine to not initialize properly
and fail to forward packets between them, and in some cases will cause
spurious transmission with size exceeding allowed packet size, causing a
kernel panic.
This is behaviour of downstream driver as well, however I
haven't observed bug reports about this SoC in the wild, so this
commit's purpose is to align this chip with all other SoC's - MT7620
were already using this arrangement.
Fixes: 60fadae62b64 ("ramips: ethernet: ralink: move reset of the esw into the esw instead of fe")
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Maxim Anisimov [Fri, 8 Dec 2023 05:34:30 +0000 (08:34 +0300)]
ramips: dts: rt3352: reset FE and ESW cores together
Failing to do so will cause the DMA engine to not initialize properly
and fail to forward packets between them, and in some cases will cause
spurious transmission with size exceeding allowed packet size, causing a
kernel panic.
Fixes: 60fadae62b64 ("ramips: ethernet: ralink: move reset of the esw into the esw instead of fe")
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
[Provide commit description, split into logical changes]
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Maxim Anisimov [Sun, 10 Dec 2023 15:27:32 +0000 (16:27 +0100)]
ramips: mtk_eth_soc: wait longer after FE core reset to settle
Enabling the FE core too early causes the system to hang during boot
uncondtionally, after the reset is released. Increate it to 1-1.2ms
range.
Fixes: 60fadae62b64 ("ramips: ethernet: ralink: move reset of the esw into the esw instead of fe")
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
[Split previous commit, provide rationale]
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Lech Perczak [Fri, 15 Dec 2023 16:15:47 +0000 (17:15 +0100)]
ramips: mtk_eth_soc: allow multiple resets
Use devm_reset_control_array_get_exclusive to register multiple
reset lines in FE driver. This is required to reattach ESW reset to FE
driver again, based on device tree bindings.
While at that, remove unused fe_priv.rst_ppe field, and add error
message if getting the reset fails.
Fixes: 60fadae62b64 ("ramips: ethernet: ralink: move reset of the esw into the esw instead of fe")
Co-developed-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
Signed-off-by: Maxim Anisimov <maxim.anisimov.ua@gmail.com>
[Split out of the bigger commit, provide commit mesage, refactor error
handling]
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Roland Reinl [Sun, 12 Nov 2023 18:04:32 +0000 (19:04 +0100)]
mediatek: Add support for D-Link EAGLE PRO AI R32
R32 is like the M32 part of the EAGLE PRO AI series from D-Link.
Specification:
- MT7622BV SoC with 2.4GHz wifi
- MT7975AN + MT7915AN for 5GHz
- MT7531BE Switch
- 512MB RAM
- 128 MB flash
- 2 LEDs (Status and Internet, both can be either orange or white)
- 2 buttons (WPS and Reset)
Compared to M32, the R32 has the following differences:
- 4 LAN ports instead of 2
- The recory image starts with DLK6E6015001 instaed of DLK6E6010001
- Individual LEDs for power and internet
- MAC address is stored at another offset in the ODM partition
MAC addresses:
- WAN MAC is stored in partition "Odm" at offset 0x81
- LAN (as printed on the device) is WAN MAC + 1
- WLAN MAC (2.4 GHz) is WAN MAC + 2
- WLAN MAC (5GHz) is WAN MAC + 3
Flashing via Recovery Web Interface:
- Set your IP address to 192.168.0.10, subnetmask 255.255.255.0
- Press the reset button while powering on the deivce
- Keep the reset button pressed until the internet LED blinks fast
- Open a Chromium based and goto http://192.168.0.1
- Download openwrt-mediatek-mt7622-dlink_eagle-pro-ai-r32-a1-squashfs-recovery.bin
Flashing via uBoot:
- Open the case, connect to the UART console
- Set your IP address to 10.10.10.3, subnet mask 255.255.255.0. Connect to one of the LAN interfaces of the router
- Run a tftp server which provides openwrt-mediatek-mt7622-dlink_eagle-pro-ai-r32-initramfs-kernel.bin.
- You can rename the file to iverson_uImage (no extension), then you don't have to enter the whole file name in uboot later.
- Power on the device and select "1. System Load Linux to SDRAM via TFTP." in the boot menu
- Enter image file, tftp server IP and device IP (if they differ from the default).
- TFTP download to RAM will start. After a few seconds OpenWrt initramfs should start
- The initramfs is accessible via 192.168.1.1, change your IP address accordingly (or use multiple IP addresses on your interface)
- Create a backup of the Kernel1 partition, this file is required if a revert to stock should be done later
- Perform a sysupgrade using openwrt-mediatek-mt7622-dlink_eagle-pro-ai-r32-squashfs-sysupgrade.bin
- Reboot the device. OpenWrt should start from flash now
Revert back to stock using the Recovery Web Interface:
- Set your IP address to 192.168.0.10, subnetmask 255.255.255.0
- Press the reset button while powering on the deivce
- Keep the reset button pressed until the internet LED blinks fast
- Open a Chromium based and goto http://192.168.0.1
- Flash a decrypted firmware image from D-Link. Decrypting an firmware image is described below.
Decrypting a D-Link firmware image:
- Download https://github.com/RolandoMagico/firmware-utils/blob/M32/src/m32-firmware-util.c
- Compile a binary from the downloaded file, e.g. gcc m32-firmware-util.c -lcrypto -o m32-firmware-util
- Run ./m32-firmware-util R32 --DecryptFactoryImage <OriginalFirmware> <OutputFile>
- Example for firmware R32A1_FW103B01: ./m32-firmware-util R32 --DecryptFactoryImage R32A1_FW103B01.bin R32A1_FW103B01.decrypted.bin
Revert back to stock using uBoot:
- Open the case, connect to the UART console
- Set your IP address to 10.10.10.3, subnet mask 255.255.255.0. Connect to one of the LAN interfaces of the router
- Run a tftp server which provides the previously created backup of the Kernel1 partition.
- You can rename the file to iverson_uImage (no extension), then you don't have to enter the whole file name in uboot later.
- Power on the device and select "2. System Load Linux Kernel then write to Flash via TFTP." in the boot menu
- Enter image file, tftp server IP and device IP (if they differ from the default).
- TFTP download to FLASH will start. After a few seconds the stock firmware should start again
There is also an image openwrt-mediatek-mt7622-dlink_eagle-pro-ai-r32-a1-squashfs-tftp.bin which can directly be flashed via U-Boot and TFTP.
It can be used if no backup of the Kernel1 partition is reuqired.
Flahsing via OEM web interface is currently not possible, the OEM images are encrypted. Creating images is only possible manually at the moment.
The support for the M32/R32 already includes support for flashing from the OEM web interface:
- The device tree contains both partitions (Kernel1 and Kernel2) with conditions to select the correct one based on the kernel command line
- The U-Boot variable "boot_part" is set accordingly during startup to finish the partition swap after flashing from the OEM web interface
- OpenWrt sysupgrade flashing always uses the partition where it was initially flashed to (no partition swap)
Signed-off-by: Roland Reinl <reinlroland+github@gmail.com>
Patryk Kowalczyk [Tue, 2 Jan 2024 09:37:47 +0000 (10:37 +0100)]
mediatek: filogic: Asus TUF AX6000 fix inverted LED for 2.5Gb LAN port
Router Asus TUF AX6000 have second MaxLinear GPY211 PHY controller for 2.5Gb LAN port.
The 5'th LAN port have inverted status of the LED.
Based on the commit from main branch
90fbec8 we could set proper status of the LED.
Signed-off-by: Patryk Kowalczyk <patryk@kowalczyk.ws>
John Audia [Mon, 1 Jan 2024 14:47:05 +0000 (09:47 -0500)]
kernel: bump 6.1 to 6.1.70
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.70
All patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod
Run-tested: x86/64/AMD Cezanne, filogic/xiaomi_redmi-router-ax6000-ubootmod
Signed-off-by: John Audia <therealgraysky@proton.me>
Nick Hainke [Wed, 27 Dec 2023 13:21:46 +0000 (14:21 +0100)]
wolfssl: update to 5.6.6
Release Notes:
https://github.com/wolfSSL/wolfssl/releases/tag/v5.6.6-stable
Refresh patches:
- 100-disable-hardening-check.patch
Fixes: CVE-2023-6935 CVE-2023-6936 CVE-2023-6937
Signed-off-by: Nick Hainke <vincent@systemli.org>
Rosen Penev [Fri, 1 Dec 2023 23:51:42 +0000 (15:51 -0800)]
oxnas: do not use pcie-controller
This was deprecated in kernel 4.14
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Pascal Ernster [Sun, 28 May 2023 12:07:20 +0000 (14:07 +0200)]
realtek: Use hex for "soc" identifier in debugfs
The upper 16 bits of the 32 bit value encode the SoC model in BCD
notation (for example 0x83806800 on a Netgear GS108Tv3 with an
RTL8380M), so it makes more sense to output the value in hex notation
than in decimal notation.
Signed-off-by: Pascal Ernster <git@hardfalcon.net>
Xavier Franquet [Mon, 20 Nov 2023 07:18:00 +0000 (08:18 +0100)]
mediatek: filogic: add support ASUS RT-AX59U
(based on support for ASUS RT-AX59U by liushiyou006)
SOC: MediaTek MT7986
RAM: 512MB DDR4
FLASH: 128MB SPI-NAND (Winbond W25N01GV)
WIFI: Mediatek MT7986 DBDC 802.11ax 2.4/5 GHz
ETH: MediaTek MT7531 Switch
UART: 3V3 115200 8N1 (Pinout silkscreened / Do not connect VCC)
Upgrade from AsusWRT to OpenWRT using UART
Download the OpenWrt initramfs image.
Copy the image to a TFTP server reachable at 192.168.1.70/24. Rename the image to rtax59u.bin.
Connect the PC with TFTP server to the RT-AX59U.
Set a static ip on the ethernet interface of your PC.
(ip address: 192.168.1.70, subnet mask:255.255.255.0)
Conect to the serial console, interrupt the autoboot process by pressing '4' when prompted.
Download & Boot the OpenWrt initramfs image.
$ setenv ipaddr 192.168.1.1
$ setenv serverip 192.168.1.70
$ tftpboot 0x46000000 rtax59u.bin
$ bootm 0x46000000
Wait for OpenWrt to boot. Transfer the sysupgrade image to the device using scp and install using sysupgrade.
$ sysupgrade -n <path-to-sysupgrade.bin>
Upgrade from AsusWRT to OpenWRT using WebUI
Download transit TRX file from https://drive.google.com/drive/folders/1A20QdjK7Udagu31FSszpWAk8-cGlCwsq
Upgrade firmware from WebUI (192.168.50.1) using downloaded TRX file
Wait for OpenWRT to boot (192.168.1.1).
Upgrade system with sysupgrade image using luci or uploading it through scp and executing sysupgrade command
MAC Address for WLAN 5g is not following the same algorithm as in AsusWRT.
We have increased by one the WLAN 5g to avoid collisions with other networks from WLAN 2g
when bit 28 is already set.
: Stock : OpenWrt
WLAN 2g (1) : C8:xx:xx:0D:xx:D4 : C8:xx:xx:0D:xx:D4
WLAN 2g (2) : : CA:xx:xx:0D:xx:D4
WLAN 2g (3) : : CE:xx:xx:0D:xx:D4
WLAN 5g (1) : CA:xx:xx:1D:xx:D4 : CA:xx:xx:1D:xx:D5
WLAN 5g (2) : : CE:xx:xx:1D:xx:D5
WLAN 5g (3) : : C2:xx:xx:1D:xx:D5
WLAN 2g (1) : 08:xx:xx:76:xx:BE : 08:xx:xx:76:xx:BE
WLAN 2g (2) : : 0A:xx:xx:76:xx:BE
WLAN 2g (3) : : 0E:xx:xx:76:xx:BE
WLAN 5g (1) : 0A:xx:xx:76:xx:BE : 0A:xx:xx:76:xx:BF
WLAN 5g (2) : : 0E:xx:xx:76:xx:BF
WLAN 5g (3) : : 02:xx:xx:76:xx:BF
Signed-off-by: Xavier Franquet <xavier@franquet.es>
Rosen Penev [Thu, 30 Nov 2023 21:38:51 +0000 (13:38 -0800)]
realtek: fix addresses in DT node names
Mostly wrong address format, one missing address, and one spurious
address suffix.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
[amend commit message]
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Rafał Miłecki [Fri, 29 Dec 2023 09:45:08 +0000 (10:45 +0100)]
mediatek: filogic: reorder nodes in mt7988a.dtsi
Use order described as preferred in DTS Coding Style:
1. Sort bus nodes by unit address
2. Use alpha-numerical order for the rest
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
David Bauer [Thu, 28 Dec 2023 22:16:02 +0000 (23:16 +0100)]
dropbear: increase default receive window size
Increasing the receive window size improves throughout on higher-latency
links such as WAN connections. The current default of 24KB caps out at
around 500 KB/s.
Increasing the receive buffer to 256KB increases the throughput to at
least 11 MB/s.
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Thu, 7 Dec 2023 03:44:33 +0000 (04:44 +0100)]
mpc85xx: fix reserved-memory node name
Make the node name match the actual memory address.
Fixes: 57d7382cb159 ("mpc85xx: increase available RAM on Extreme Networks WS-AP3825i")
Signed-off-by: David Bauer <mail@david-bauer.net>
David Bauer [Tue, 26 Dec 2023 00:17:18 +0000 (01:17 +0100)]
ramips: fix label-mac for Xiaomi RA75
The label-mac of the repeater is the address used on the 2.4 GHz radio,
not the ethernet MAC.
Signed-off-by: David Bauer <mail@david-bauer.net>
Chuanhong Guo [Sun, 19 Nov 2023 12:56:52 +0000 (20:56 +0800)]
package: new package for usb gadget setup
Setting up usb gadgets using g_* kernel modules are considered a
legacy approach, but the usb_gadget configfs is a bit annoying
to use directly.
The usb_gadget configfs works by creating magic directories
and writing to magic files under /sys/kernel/config/usbgadget.
This new package is an init script to setup usb_gadget configfs
using uci. In the config file, gadget/configuration/function
sections create corresponding directories. UCI options are magic
files available in the configfs and strings/0x409 directories,
grabbed with a 'find' command. UDC option in gadget writes
the UDC file under the 'gadget' directory to attach the
generated gadget config.
It's also possible to apply pre-made config templates under
/usr/share/usbgadget. The templates use the same UCI config
format, with the 'gadget' entry named 'g1'. Currently, there
are templates for CDC-ACM and CDC-NCM gadgets written based
on existing g_*.ko module code.
Certain SBCs come with only a USB device port (e.g. Raspberry Pi
Zero). With this script, it's now possible to perform initial
setup on them by adding a default NCM gadget.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Rafał Miłecki [Sun, 26 Nov 2023 20:24:28 +0000 (21:24 +0100)]
base-files: execute package's "postinst" after executing uci-defaults
Allow "postinst" scripts to perform extra actions after applying all
kind of fixups implemented using uci-defaults.
This is needed e.g. by uhttpd-mod-ubus which after installation in a
running systems needs to:
1. Update uhttpd config using its uci-defaults script
2. Reload uhttpd
While this approach makes sense there is a risk it'll blow up some
corner case postinst usages. There is only 1 way to find out.
Cc: Hauke Mehrtens <hauke@hauke-m.de>
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Mikhail Zhilkin [Sat, 9 Dec 2023 17:17:02 +0000 (17:17 +0000)]
mediatek: add support for Routerich AX3000
This PR is continuation of work under "mediatek: add support for Routerich
AX3000" #13703 by the agreement with PR #13703 original author (Maximilian
Weinmann <x1@disroot.org>). All reviews from the previous PR were taken
into into account.
Routerich AX3000 is a wireless WiFi 6 router.
Specification
-------------
- SoC : MediaTek MT7981BA dual-core ARM Cortex-A53 1.3 GHz
- RAM : DDR3 256 MiB (ESMT M15T2G16128A)
- Flash : SPI-NAND 128 MiB (ESMT F50L1G41LB)
- WLAN : MediaTek MT7976CN dual-band WiFi 6
- 2.4 GHz : b/g/n/ax, MIMO 2x2
- 5 GHz : a/n/ac/ax, MIMO 2x2
- Ethernet : 10/100/1000 Mbps x4 (MediaTek MT7531AE)
- USB : 1x 2.0
- UART : through-hole on PCB
- [J500] GND, TX, RX, 3.3V (115200n8)
- Buttons : Mesh, Reset
- LEDs : 1x Power (Blue)
1x WiFi 2.4 GHz (Blue)
1x WiFi 5 GHz (Red)
1x Mesh (Blue)
3x LAN activity (Blue)
1x WAN activity (Blue)
2x WAN no-internet (Red)
- Power : 12 VDC, 1.5 A
Installation
------------
Flash OpenWrt 'sysupgrade.bin' image using stock firmware web-interface
(without keeping settings).
Return to stock
---------------
Install stock firmware image (without keeping settings) using OpenWrt
sysupgrade method.
Recovery
--------
Connect uart, use u-boot menu to flash stock firmware image or boot
OpenWrt initramfs image.
MAC addresses
-------------
+---------+-------------------+-----------+
| | MAC | Algorithm |
+---------+-------------------+-----------+
| WAN | 24:0f:5e:xx:xx:b4 | label |
| LAN | 24:0f:5e:xx:xx:b5 | label+1 |
| WLAN 2g | 24:0f:5e:xx:xx:b6 | label+2 |
| WLAN 5g | 24:0f:5e:xx:xx:b7 | label+3 |
+---------+-------------------+-----------+
The WLAN 2g MAC was found in 'Factory', 0x4
Co-authored-by: Maximilian Weinmann <x1@disroot.org>
Signed-off-by: Mikhail Zhilkin <csharper2005@gmail.com>
Ian Oderon [Sat, 9 Dec 2023 04:48:35 +0000 (12:48 +0800)]
mediatek: add support for Zbtlink ZBT-Z8103AX
Specifications:
SoC: MediaTek MT7981B
RAM: 256MiB
Flash: SPI-NAND 128 MiB
Switch: 1 WAN, 3 LAN (Gigabit)
Buttons: Reset, Mesh
Power: DC 12V 1A
WiFi: MT7976CN
UART: 115200n8
UART Layout:
VCC-RX-TX-GND
No. of Antennas: 6
Note: Upon opening the router, only 5 antennas were connected
to the mainboard.
Led Layout:
Power-Mesh-5gwifi-WAN-LAN3-LAN2-LAN1-2gWiFi
Buttons:
Reset-Mesh
Installation:
A. Through OpenWrt Dashboard:
If your router comes with OpenWrt preinstalled (modified by the seller),
you can easily upgrade by going to the dashboard (192.168.1.1) and then
navigate to System -> Backup/Flash firmware, then flash the firmware
B. Through TFTP
Standard installation via UART:
1. Connect USB Serial Adapter to the UART, (NOTE: Don't connect the VCC pin).
2. Power on the router. Make sure that you can access your router via UART.
3. Restart the router then repeatedly press ctrl + c to skip default boot.
4. Type > bootmenu
5. Press '2' to select upgrade firmware
6. Press 'Y' on 'Run image after upgrading?'
7. Press '0' and hit 'enter' to select TFTP client (default)
8. Fill the U-Boot's IP address and TFTP server's IP address.
9. Finally, enter the 'firmware' filename.
Signed-off-by: Ian Oderon <ianoderon@gmail.com>
Samir Ibradžić [Sun, 17 Dec 2023 07:58:06 +0000 (16:58 +0900)]
qualcommax: Fix Buffalo WXR-5950AX12 Ethernet DTS
* Revert the switch_lan_bmp and switch_wan_bmp to match the values from
the original device support DTS
* Add specific malibu_first_phy_addr, as it differs from default for
this device
Fixes: #14234
Reviewed-by: Robert Marko <robimarko@gmail.com>
Tested-by: Samir Ibradžić <sibradzic@gmail.com> # Buffalo WXR-6000AX12P
Signed-off-by: Samir Ibradžić <sibradzic@gmail.com>
David Bentham [Sun, 24 Dec 2023 13:33:23 +0000 (13:33 +0000)]
ramips: correct the PCIe port number for Unielec u7621-01
MT7621 gets a new PCIe driver in the 5.15+ kernel. Allocating wrong PCIe
port will cause the PCIe NIC to not work properly. This commit fixes
the wrong port numbers on Unielec u7621-01.
According to the bootlog, MT7612E (5 GHz) is connected to pcie2, and
MT7603E (2 GHz) is connected to pcie1:
[ 1.294844] mt7621-pci
1e140000.pcie: pcie0 no card, disable it (RST & CLK)
[ 1.308635] mt7621-pci
1e140000.pcie: PCIE1 enabled
[ 1.318277] mt7621-pci
1e140000.pcie: PCIE2 enabled
Also correct the led activity for the MT7603e - not used on the MT7612e
Signed-off-by: David Bentham <db260179@gmail.com>
Shiji Yang [Sun, 24 Dec 2023 11:05:56 +0000 (11:05 +0000)]
ramips: remove systick node for mt7621 SoC dtsi
This node is useless because MT7621 uses the generic mips systick
driver instead of the ralink systick driver.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Shiji Yang [Fri, 15 Dec 2023 12:36:00 +0000 (12:36 +0000)]
ramips: remove useless resets properties from SoC dtsi
These drivers don't request reset control. And most reset properties
even have incorrect reset source definitions.
1. interrupt controller, ref: arch/mips/ralink/irq.c
2. memory controller, ref: arch/mips/ralink/of.c
3. gpio controller, ref: drivers/gpio/gpio-ralink.c (local patch)
4. systic, ref: arch/mips/ralink/cevt-rt3352.c
5. pwm, ref: drivers/pwm/pwm-mediatek-ramips.c (local patch)
Tested on MT7620 && MT7628.
Signed-off-by: Shiji Yang <yangshiji66@qq.com>
Robert Senderek [Sun, 10 Dec 2023 12:49:10 +0000 (13:49 +0100)]
mediatek: enable mt7981-wo-firmware package by default
Add support for wireless offload package in default configuration for
-Cudy WR3000
-Confiabits MT7981
For some reason those ware missing. I confirm this work for my Cudy WR3000
Signed-off-by: Robert Senderek <robert.senderek@10g.pl>
Lech Perczak [Sun, 17 Dec 2023 17:25:55 +0000 (18:25 +0100)]
ath79: generic: disable SPI-NOR write protect unconditionally
Kernel 5.15 introduced a significant change to spi-nor subsystem [1],
which would the SPI-NOR core to no longer unprotect the Flash chips if
their protection bits are non-volatile, which is the case for MX25L6405D
and MX25L12805D, used in Ubiquiti XW and WA lines of devices [2].
However, their bootloader forcibly enables this protection before
continuing to boot, making the kernel not unprotect the flash upon boot,
causing JFFS2 to be unable write to the filesystem. Because sysupgrade
seems to unlock the flash explicitly, the upgrade will work, but the
system will be unable to save configrationm showing the following symptom
in the kernel log:
[ 86.168016] jffs2_scan_eraseblock(): End of filesystem marker found at 0x0
[ 86.192344] jffs2_build_filesystem(): unlocking the mtd device...
[ 86.192443] done.
[ 86.200669] jffs2_build_filesystem(): erasing all blocks after the end marker...
[ 86.220646] jffs2: Newly-erased block contained word 0x19852003 at offset 0x001e0000
[ 86.292388] jffs2: Newly-erased block contained word 0x19852003 at offset 0x001d0000
[ 86.324867] jffs2: Newly-erased block contained word 0x19852003 at offset 0x001c0000
[ 86.355316] jffs2: Newly-erased block contained word 0x19852003 at offset 0x001b0000
[ 86.402855] jffs2: Newly-erased block contained word 0x19852003 at offset 0x001a0000
Disable the write protection unconditionally for ath79/generic subtarget,
so the XW and WA devices can function again. However, this is only a
stopgap solution - it probably should be investigated if there is a way
to selectively unlock the area used by rootfs_data - but given the lock
granularity, this seems unlikely.
With this patch in place, rootfs_data partition on my Nanostation Loco
M5 XW is writable again.
Fixes: #12882
Fixes: #13750
Fixes: 579703f38c14 ("ath79: switch to 5.15 as default kernel")
Link: http://www.infradead.org/pipermail/linux-mtd/2020-October/082805.html
Link: https://forum.openwrt.org/t/powerbeam-m5-xw-configuration-loss-after-reboot/141925
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Oldřich Jedlička [Fri, 6 Oct 2023 21:37:47 +0000 (23:37 +0200)]
mac80211: fix flush during station removal
This fixes WARN_ONs when using AP_VLANs after station removal. The flush
call passed AP_VLAN vif to driver, but because these vifs are virtual and
not registered with drivers, we need to translate to the correct AP vif
first.
Fixes: openwrt#12420
Signed-off-by: Oldřich Jedlička <oldium.pro@gmail.com>
Tobias Schramm [Sat, 23 Dec 2023 12:41:01 +0000 (13:41 +0100)]
realtek: 5.15: rtl93xx: support 100BASE-T and 10BASE-T MAC modes
The MAC embedded in rtl93xx switch SoCs needs different mac mode bits set
to support 10BaseT and 100BaseT link modes. Set them accordingly.
This change has been tested on a ZyXEL XGS1250-12.
Signed-off-by: Tobias Schramm <tobias@t-sys.eu>
John Audia [Sat, 23 Dec 2023 11:52:06 +0000 (06:52 -0500)]
kernel: bump 5.15 to 5.15.145
Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.145
No patches needed a rebase.
Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
Til Kaiser [Thu, 9 Nov 2023 13:28:45 +0000 (14:28 +0100)]
Revert "x86: add support for Mellanox Spectrum SN2000 Switches"
This reverts commit
3004c20614fdb29732f750417a578274a8ed988e.
The commit added the needed packages for the new target
to the generic x86_64 image. This results into unwanted
modules and firmware files for other x86 devices.
Additionally, there is the following error message
while booting the image on other x86 devices:
[ 8.531720] kmodloader: 1 module could not be probed
[ 8.532613] kmodloader: - leds-mlxcpld - 0
For now, the needed packages will have to be selected
manually while configuring the image.
Signed-off-by: Til Kaiser <til.kaiser@gmx.de>
John Audia [Wed, 20 Dec 2023 18:32:41 +0000 (13:32 -0500)]
kernel: bump 6.1 to 6.1.69
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.69
Removed upstreamed:
generic/backport-6.1/795-v6.3-01-r8152-add-USB-device-driver-for-config-selection.patch[1]
generic/backport-6.1/795-v6.3-03-r8152-avoid-to-change-cfg-for-all-devices.patch[2]
generic/backport-6.1/795-v6.3-04-r8152-remove-rtl_vendor_mode-function.patch[3]
generic/backport-6.1/795-v6.4-07-r8152-fix-the-autosuspend-doesn-t-work.patch[4]
generic/backport-6.1/795-v6.6-11-r8152-add-vendor-device-ID-pair-for-D-Link-DUB-E250.patch[5]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=
893597cbabfbc00ee51fd5f73e2028994f49ded6
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=
1d82735f4bae954d5ba004994b96baec791f874f
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=
4c2ad8e39c62c5288ca31ebf5c30e34f3bd9d044
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=
325556d46bfd13a2fa0d304d0625be86821fd683
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.69&id=
cac1218b32d7b56832dd36f7baf82f123f305a2a
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Wed, 20 Dec 2023 18:54:11 +0000 (13:54 -0500)]
kernel: bump 5.15 to 5.15.144
Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.144
Removed upstreamed:
generic/backport-5.15/795-v6.3-01-r8152-add-USB-device-driver-for-config-selection.patch[1]
generic/backport-5.15/795-v6.3-03-r8152-avoid-to-change-cfg-for-all-devices.patch[2]
generic/backport-5.15/795-v6.3-04-r8152-remove-rtl_vendor_mode-function.patch[3]
generic/backport-5.15/795-v6.4-07-r8152-fix-the-autosuspend-doesn-t-work.patch[4]
generic/backport-5.15/795-v6.6-11-r8152-add-vendor-device-ID-pair-for-D-Link-DUB-E250.patch[5]
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=
ca75274b17b890e6f6d2951e364360e25f2846e9
2. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=
07ba21627ebbb2c68c357e8d698166c45078d014
3. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=
aa3cc80e8edaa6098b58eb4a613d765496c2dfca
4. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=
4c117984824b4a852a0e0765e5bdea0f1c7d6309
5. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.144&id=
404ce6ee69d384096663e3f6987d915090447835
Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
Tianling Shen [Mon, 18 Dec 2023 02:54:17 +0000 (10:54 +0800)]
arm-trusted-firmware-sunxi: Update to 2.10
Runtime tested on NanoPi R1S H5 and Orange Pi Zero3.
Changelog: https://trustedfirmware-a.readthedocs.io/en/v2.10/change-log.html
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Felix Fietkau [Tue, 19 Dec 2023 21:35:11 +0000 (22:35 +0100)]
netifd: update to Git HEAD (2023-12-19)
a2d32f0dcf16 Revert "system-linux: set pending to 0 on ifindex found or error for if_get_master"
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Tianling Shen [Mon, 18 Dec 2023 03:12:38 +0000 (11:12 +0800)]
sunxi: mark upstreamed patches as such
Also sort them to start from 001.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Sun, 17 Dec 2023 11:49:08 +0000 (19:49 +0800)]
sunxi: remove outdated kernel 5.15 files
We're on 6.1 now, these files can go.
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
Tianling Shen [Fri, 15 Dec 2023 10:32:18 +0000 (18:32 +0800)]
linux-firmware: update to
20231211
06fa7dd2 cxgb4: Update firmware to revision 1.27.4.0
fd44bdae amdgpu: DMCUB updates for various AMDGPU asics
7ed62638 Revert "rtl_bt: Update RTL8852C BT USB firmware to 0x040D_7225"
42d31f8f rtl_bt: Add firmware v2 file for RTL8852C
0ab353f8 Merge branch 'for-upstream' of http://git.chelsio.net/pub/git/linux-firmware
f2eb058a linux-firmware: Update AMD cpu microcode
980373f5 cirrus: Add CS35L41 firmware for HP G11 models
789aa815 amdgpu: partially revert firmware for GC 11.0.0 and GC 11.0.2
ae80f1f1 Revert "amdgpu: partially revert firmware for GC 11.0.0 and GC 11.0.2"
6c089c10 amdgpu: DMCUB updates for various AMDGPU asics
0e048b06 Merge branch 'for-upstream' of https://github.com/CirrusLogic/linux-firmware
5eeda20d amdgpu: DMCUB updates for various AMDGPU asics
81caac98 i915: add GSC 102.0.0.1655 for MTL
ca49c8cf rtw89: 8851b: update fw to v0.29.41.2
ef41ae8f rtw89: 8852b: update fw to v0.29.29.3
a33f8f1a amdgpu: update DMCUB to 0.0.181.0 for various AMDGPU ASICs
97e88a0d linux-firmware: Update AMD SEV firmware
d0172b89 linux-firmware: update firmware for qat_4xxx devices
50da38ee Merge branch 'mtl_gsc_1655' of git://anongit.freedesktop.org/drm/drm-firmware
fc45c425 linux-firmware: Update firmware file for Intel Bluetooth AX201
3892dc01 linux-firmware: Update firmware file for Intel Bluetooth AX200
606a17b1 linux-firmware: Update firmware file for Intel Bluetooth AX210
55545299 linux-firmware: Update firmware file for Intel Bluetooth AX211
904880ad linux-firmware: Update firmware file for Intel Bluetooth AX211
e6c09397 linux-firmware: Update firmware file for Intel Bluetooth AX203
51e9ea58 linux-firmware: Update firmware file for Intel Bluetooth AX203
58773db5 Merge https://github.com/pkshih/linux-firmware
2bad80e7 copy-firmware: Support additional compressor options
db99828b copy-firmware: Introduce 'RawFile' keyword
becc678d Merge tag 'amd-2023-08-18' of https://gitlab.freedesktop.org/drm/firmware
659dfe64 Merge tag 'amd-2023-08-25' of https://gitlab.freedesktop.org/drm/firmware
49f9e347 i915: Update MTL DMC to v2.16
8e1fe1bd Merge branch 'dmc-mtl_2.16' of git://anongit.freedesktop.org/drm/drm-firmware
27fb2f63 check_whence: reformat using python black
c442a500 Add pre-commit hooks and codespell template
5e2367f8 Wire up pre-commit to `make check`
408eb34a Rewrite README in markdown
5ebb5914 Merge branch 'mlimonci/update-ci' into 'main'
792115b2 Add Dockerfile used to build CI image
69e68cde Add gitlab ci for calling pre-commit and ci-fairy
b2f03c84 Add a rule for automatic tagging releases by pipeline schedule
c79933a8 Fix carl9170fw shell scripts for shellcheck errors
8976d8c3 Add shellcheck pre-commit target
1edd2d6f QCA: Update Bluetooth WCN685x 2.1 firmware to 2.1.0-00605
61501389 Merge branch 'mlimonci/enable-pre-commit-ci' into 'main'
6c097314 Merge branch 'mlimonci/shellcheck' into 'main'
3e79f6b8 Create symlinks for all firmware that is duplicate using rdfind
bcc397d6 Add new toplevel 'make dist' target.
f12059b7 Capture artifacts from `make dist` to save at release time.
d5c485f9 Only run ci-fairy on merge requests
bb4f6589 Merge branch 'mlimonci/skip-ci-fairy-for-main' into 'main'
c57a9388 Merge https://github.com/tjiang1234/btfw-wcn6855-605
80de4d8a check_whence: Recognize RawFile keyword
c6ce6ac0 WHENCE: amd-ucode: Use new RawFile keyword
e805619f WHENCE: Don't compress qcom json files
7d8f2d95 Merge branch 'RawFile' into 'main'
a0142c57 ath10k/WCN3990: move wlanmdsp to qcom/sdm845
fe85b0c7 Merge branch 'qcom' into 'main'
20d250e3 Merge branch 'mlimonci/make-dist' into 'main'
9f3ec3a8 qcom: add GPU firmware for QCM2290 / QRB2210
a32c8568 qcom: add firmware for QCM2290 platforms
89659cb9 qcom: add firmware for QRB4210 platforms
106ff9f9 qcom: add venus firmware files for v6.0
74cc8ca8 qcom: add firmware for the onboard WiFi on qcm2290 / qrb4210
1346f922 qcom: sm8250: update DSP firmware
adeabfda qcom: Update vpu-1.0 firmware
bb3d5bc9 qcom: sm8250: add RB5 sensors DSP firmware
7d94e0fa linux-firmware: add link to sc8280xp audioreach firmware
ad03b851 Merge branch 'rb12-fw-v2' into 'main'
28935de4 Merge branch 'rb5-update' of https://github.com/lumag/linux-firmware into rb5-update
473be1c4 Merge branch 'rb5-update' into 'main'
60458657 Merge branch 'sc8280xp-audio-fw-fixes' of https://git.kernel.org/pub/scm/linux/kernel/git/srini/linux-firmware into sc8280xp-audio-fw-fixes
cb926295 Merge branch 'sc8280xp-audio-fw-fixes' into 'main'
c801b3b8 Turn off textwidth check
dfa11466 Merge branch 'main' into 'main'
2bbca647 amdgpu: update DMCUB to 0.0.183.0 for various AMDGPU ASICs
a5dbe400 i915: update MTL HuC to version 8.5.4
3a9bcf45 Merge branch 'main' into 'main'
d252e92d linux-firmware: amd-ucode: Add note on fam19h warnings
3a07aa51 Merge branch 'amd-ucode' into 'main'
3786ca8f Merge branch 'mtl_huc_8.5.4' of git://anongit.freedesktop.org/drm/drm-firmware into mtl_huc
919300d1 Merge branch 'mtl_huc' into 'main'
f48da6da Run merge request pipelines for pre-commit.
3672ccab Merge branch 'mlimonci/fix-merge-requests-ci' into 'main'
08532e36 iwlwifi: update cc/Qu/QuZ firmwares for core81-65 release
765492b8 iwlwifi: add new FWs from core81-65 release
29b47c59 Merge branch 'main' into 'main'
addc3392 rtl_bt: Update RTL8851B BT USB firmware to 0x048A_D230
1ed8d8bf linux-firmware: Update FW files for MRVL PCIE 8997 chipsets
7d1f06ab Merge branch 'rtl_bt' into 'main'
74830f66 Merge branch 'mrvl' into 'main'
328beacb amd_pmf: Add initial PMF TA for Smart PC Solution Builder
8b855f37 Merge branch 'main' into 'main'
a6744df8 iwlwifi: add FWs for new GL and MA device types with multiple RF modules
1c285c0a amdgpu: update aldebaran firmware from 5.7 branch
f9366fa1 amdgpu: update GC 11.0.3 firmware from 5.7 branch
b21bd580 amdgpu: update PSP 13.0.10 firmware from 5.7 branch
5a99cd50 amdgpu: update SMU 13.0.10 firmware from 5.7 branch
abe39de3 amdgpu: update raven2 firmware from 5.7 branch
7f027004 amdgpu: update navi10 firmware from 5.7 branch
c25d0ef6 amdgpu: update yellow carp firmware from 5.7 branch
aa67101a amdgpu: update GC 11.0.2 firmware from 5.7 branch
22ca16ee amdgpu: update PSP 13.0.7 firmware from 5.7 branch
a3b30e39 amdgpu: update SDMA 6.0.2 firmware from 5.7 branch
971fe4bd amdgpu: update SMU 13.0.7 firmware from 5.7 branch
fd688e37 amdgpu: update VCN 4.0.4 firmware from 5.7 branch
17a48ca2 amdgpu: update navi12 firmware from 5.7 branch
d850220b amdgpu: update renoir firmware from 5.7 branch
fcf92700 amdgpu: update navi14 firmware from 5.7 branch
a34604d3 amdgpu: update GC 11.0.1 firmware from 5.7 branch
7b785ce1 amdgpu: update PSP 13.0.4 firmware from 5.7 branch
ab618fa5 amdgpu: update SDMA 6.0.1 firmware from 5.7 branch
4ee8dc91 amdgpu: update GC 11.0.4 firmware from 5.7 branch
c09f4219 amdgpu: update PSP 13.0.11 firmware from 5.7 branch
b828f43c amdgpu: update sienna cichlid firmware from 5.7 branch
f8f3d52e amdgpu: update green sardine firmware from 5.7 branch
7d8a4a06 amdgpu: update vangogh firmware from 5.7 branch
e6a3c06e amdgpu: update navy flounder firmware from 5.7 branch
5e40e6c2 amdgpu: update picasso firmware from 5.7 branch
51637156 amdgpu: update dimgrey cavefish firmware from 5.7 branch
08e23f2c amdgpu: update vega10 firmware from 5.7 branch
050fe578 amdgpu: update vega12 firmware from 5.7 branch
ee81c65c amdgpu: update beige goby firmware from 5.7 branch
0923446e amdgpu: update vega20 firmware from 5.7 branch
c321aeee amdgpu: update GC 11.0.0 firmware from 5.7 branch
7baff8dd amdgpu: update PSP 13.0.0 firmware from 5.7 branch
9973966a amdgpu: update SDMA 6.0.0 firmware from 5.7 branch
af3d18b3 amdgpu: update SMU 13.0.0 firmware from 5.7 branch
b65ac01b amdgpu: update VCN 4.0.0 firmware from 5.7 branch
a92f8f21 amdgpu: update GC 10.3.6 firmware from 5.7 branch
fc627e98 amdgpu: update PSP 13.0.5 firmware from 5.7 branch
f5b7964e amdgpu: update SDMA 5.2.6 firmware from 5.7 branch
5837f76c amdgpu: update DCN 3.1.6 firmware from 5.7 branch
35d98aaf amdgpu: update GC 10.3.7 firmware from 5.7 branch
8ba97109 amdgpu: update PSP 13.0.8 firmware from 5.7 branch
75e5b634 amdgpu: update SDMA 5.2.7 firmware from 5.7 branch
95ec6f69 amdgpu: update raven firmware from 5.7 branch
18b60f44 i915: Update MTL DMC to v2.17
cef80743 Add new Makefile target to build a deb and rpm package
ce33c671 Build debian and fedora images
312b5d8a Merge branch 'iwlwifi-fw-2023-09-27' into 'main'
957828e1 linux-firmware: Update firmware file for Intel Bluetooth 9260
717c1a5d linux-firmware: Update firmware file for Intel Bluetooth 9560
a3e18aff linux-firmware: Update firmware file for Intel Bluetooth AX210
3fed6fb8 linux-firmware: Update firmware file for Intel Bluetooth AX211
3ce0e06b linux-firmware: Update firmware file for Intel Bluetooth AX211
8c1e8c66 linux-firmware: Update firmware file for Intel Bluetooth AX201
bbf94191 linux-firmware: Update firmware file for Intel Bluetooth AX201
ab0c0a78 linux-firmware: Add firmware file for Intel Bluetooth AX211
2316c3d0 Merge branch 'intel-bt-
20231004' into 'main'
58b8d3f3 Merge branch 'dmc-mtl_2.17' of git://anongit.freedesktop.org/drm/drm-firmware into dmc-mtl
8e57de05 Merge branch 'dmc-mtl' into 'main'
5105ff4b Merge branch 'mlimonci/upstream-packaging' into 'main'
389575a8 WHENCE: add symlink for BananaPi M64
7727f7e3 Merge branch 'patch-
1696561325' into 'main'
92e24e04 iwlwifi: add a missing FW from core80-39 release
44a9510c i915: Add GuC v70.13.1 for DG2, TGL, ADL-P and MTL
1be48f85 Merge branch 'pr-24-
1697222431' into 'main'
4d619071 Add a script for a robot to open up pull requests
0da49b90 linux-firmware: add Amlogic bluetooth firmware
63e8aa40 Merge branch 'main' into 'main'
a3bcbbf2 amdgpu: update SMU 13.0.0 firmware
8ff933de Merge branch 'robot/pr-0-
1697570762' into 'main'
f893135f Merge branch 'robot/pr-0-
1697658135' into 'main'
ecaeef5d Add support for sending emails while processing a PR/patch
29e9aa86 Merge branch 'mlimonci/robot' into 'main'
06afd7f9 linux-firmware: Update AMD cpu microcode
1115cf5c Merge branch 'robot/patch-0-
1697735493' into 'main'
6ed75465 Fix the robot email script
d983107a Merge branch 'mlimonci/fix-email' into 'main'
7bfa5f4d Catch unicode decode errors
3de241ed rtl_nic: update firmware of RTL8156B
39d55392 Use `git am` instead of `b4 shazam`
ad84593d Merge branch 'robot/patch-23-
1698074268' into 'main'
5f560c1e Merge branch 'mlimonci/unicode' into 'main'
4ee01756 Merge branch 'mlimonci/use-am' into 'main'
b22703ca Disable deb and rpm CI other than at release
80703e05 Merge branch 'mlimonci/less-ci' into 'main'
37761e2b Intel Bluetooth: Update firmware file for Intel Bluetooth BE200
dd6368d9 Intel Bluetooth: Update firmware file for Intel Bluetooth Magnetor AX211
fabc67bf Intel Bluetooth: Update firmware file for Intel Bluetooth Magnetor AX201
581a25e6 Intel Bluetooth: Update firmware file for Intel Bluetooth AX203
bc0b7dfa Intel Bluetooth: Update firmware file for Intel Bluetooth AX203
2ceaa29d Merge branch 'core80' into 'main'
dcec764d Intel Bluetooth: Update firmware file for Intel Bluetooth Magnetor AX101
1962446e Intel Bluetooth: Update firmware file for Intel Bluetooth AX210
4c092813 Intel Bluetooth: Update firmware file for Intel Bluetooth AX211
59aaeac9 Intel Bluetooth: Update firmware file for Intel Bluetooth AX211
2b304bfe Merge branch 'main' into 'main'
02df6e4f rtw89: 8851b: update fw to v0.29.41.3
7a916315 rtw89: 8852b: update fw to v0.29.29.4
2afd1423 rtw89: 8852b: update fw to v0.29.29.5
1ba9408e linux-firmware: ixp4xx: Add the IXP4xx firmware
411938ad Merge branch 'mlimonci/rtw89' into 'main'
185e84b8 Merge branch 'ixp4xx' into 'main'
724c77e5 qca: add bluetooth firmware for WCN3988
19342f15 Merge branch 'apbtfw' into 'main'
65a89b16 amdgpu: DMCUB updates for various AMDGPU ASICs
df98199f Merge tag 'amd-2023-11-03'
9a3bf241 Merge branch 'main' into 'main'
9a170370 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX210
cdecf243 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX211
be41333c Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX211
34600f06 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX203
8563348b Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX203
ed34505f Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX211
92faee69 Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX203
19c3c023 Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX101
a5a6dded Intel Bluetooth: Update firmware file for Intel Bluetooth BE200
2340796d Merge branch 'main' into 'main'
f4a3c72e nvidia: add GSP-RM version 535.113.01 firmware images
16b92b8d Merge branch 'mlimonci/nvidia-gsp-rm-535' into 'main'
cc8a7d10 Fix classification of some pull requests
4c55675d Fix symlink creation for some files
195eae59 Add checks for destination directory being specified
cf8315de Ensure rdfind is installed
b79f31cf Merge branch 'mlimonci/fix-symlinks' into 'main'
1ee89a11 Merge branch 'mlimonci/robot-fix' into 'main'
c57c8384 amdgpu: DMCUB updates for various AMDGPU ASICs
1737b581 Merge tag 'amd-2023-11-10' into amd-2023-11-10
74158e7a Merge branch 'amd-2023-11-10' into 'main'
bf5150dd Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX210
80a378a2 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX211
b021ad7c Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX211
bfc7dbe7 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX203
4eb64f9b Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX203
c7c5ca39 Intel Bluetooth: Update firmware file for Solar Intel Bluetooth AX101
80907d76 Intel Bluetooth: Update firmware file for SolarF Intel Bluetooth AX101
8b5a4168 Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX211
5e40b6aa Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX203
307a4e50 Intel Bluetooth: Update firmware file for Magnetor Intel Bluetooth AX101
6910095b linux-firmware: add firmware for mt7988 internal 2.5G ethernet phy
bd4df953 Merge branch 'main' into 'main'
398b4605 Merge branch 'robot/patch-0-
1699862686' into 'main'
1f8f61d5 Process pull requets directly from mbox
05ac293b Add extra debugging output when processing pull requests
d011ba69 Add a workaround for gitlab.freedesktop.org pull requests
b72eeb60 Merge branch 'mlimonci/robot-pr-improvements' into 'main'
978dff67 linux-firmware: Add firmware for Cirrus CS35L41 on 2024 ASUS Zenbook Laptops
4f498d09 linux-firmware: Add firmware for Cirrus CS35L41 on HP G11 Laptops
4fc5801e iwlwifi: update cc/Qu/QuZ firmwares for core83-55 release
a07fd0b9 iwlwifi: add new FWs from core83-55 release
124b6639 Merge branch 'robot/pr-0-
1700068965' into 'main'
9009038b Enable deb and rpm builds on tags
f27dec61 iwlwifi: fix for the new FWs from core83-55 release
58ec4325 Merge branch 'mlimonci/release-packages' into 'main'
8228c222 Try both utf-8 and windows-1252 for decoding email
b486a13b Merge branch 'robot/pr-17-
1700153404' into 'main'
6723a8d9 Merge branch 'robot/pr-5-
1700153542' into 'main'
bfd5f0b9 Make email replies more resilient
45109014 i915: Update MTL DMC to v2.19
f81145a0 Merge branch 'robot/pr-0-
1700234575' into 'main'
7124ce30 Merge branch 'mlimonci/encoding' into 'main'
c03db704 amdgpu: update DMCUB firmware to 0.0.193.0 for DCN31 and DCN314
ba1aa06f Intel Bluetooth: Update firmware file for Intel Bluetooth BE200
a41fa7c5 mediatek: Sync shared memory structure changes
c3ce13b3 Merge branch 'main' into 'main'
9552083a Merge branch 'robot/pr-0-
1700470117' into 'main'
0c211dbe Merge branch 'amd-staging' into 'main'
5e9fdab5 mediatek: Remove an unused packed library
bef5a36d Merge branch 'robot/patch-1-
1700555775' into 'main'
47582844 ice: update ice DDP package to 1.3.35.0
0628ba79 ice: update ice DDP comms package to 1.3.45.0
ad0bbae4 Merge branch 'robot/patch-1-
1700674626' into 'main'
a5539dc1 Merge branch 'robot/patch-2-
1700674629' into 'main'
9afbbf25 powervr: add firmware for Imagination Technologies AXE-1-16M GPU
fad38ab8 Merge branch 'powervr-2023-11-23' into 'main'
ea682fba qcom: update Venus firmware file for v6.0
18f56bf3 qcom: update qcm2290/qrb4210 WiFi firmware file
0bba2c99 qcom: update qcm2290 firmware
6cfedcbb qcom: update qrb4210 firmware
87427f23 amdgpu: update DMCUB firmware to 0.0.194.0 for DCN321 and DCN32
f6d61ded Merge branch 'robot/pr-0-
1700887115' into 'main'
c6823ce2 Makefile, copy-firmware: Use portable "command -v" to detect installed programs
9fdcf639 Merge branch 'robot/patch-0-
1701018572' into 'main'
0a18a729 linux-firmware: update firmware for MT7921 WiFi device
6b91b2ef linux-firmware: update firmware for MT7922 WiFi device
cc44f3b8 Merge branch 'mt7921-wifi' into 'main'
1366b827 linux-firmware: update firmware for mediatek bluetooth chip (MT7921)
5955de2f Merge branch 'mt7922-wifi' into 'main'
1180974e linux-firmware: update firmware for mediatek bluetooth chip (MT7922)
351f0c67 Merge branch 'mt7921-bt' into 'main'
f440b984 ice: update ice DDP wireless_edge package to 1.3.13.0
adbdc241 Merge branch 'mt7922-bt' into 'main'
f8c611e7 Merge branch 'ice-edge' into 'main'
4124f8f9 Make rdfind optional
4fab4e51 Merge branch 'rdfind-opt' into 'main'
98eed92e rtl_bt: Update RTL8852A BT USB firmware to 0xDFC8_145F
5aadb590 Merge branch 'robot/patch-0-
1701175489' into 'main'
d9f6088f Add a COPYOPTS variable
aae60524 Merge branch 'make-opts' into 'main'
37db2a09 s5p-mfc: Add MFC v12 Firmware
034e24b8 Merge branch 's5p-mfc-v12' into 'main'
ddc99b3d linux-firmware: add firmware for en8811h 2.5G ethernet phy
dbf82492 cxgb4: Update firmware to revision 1.27.5.0
129e07d9 Merge branch 'robot/pr-0-
1701358064' into 'main'
f63dd70d Merge branch 'robot/patch-0-
1701352637' into 'main'
b9d971b9 Merge branch 'rb12-update' into 'main'
bfc33c1e linux-firmware: Update AMD cpu microcode
c004dbee Merge branch 'robot/patch-0-
1701808157' into 'main'
23feb609 wfx: fix broken firmware
1505c948 wfx: update to firmware 3.17
f2e52a1c Merge branch 'wfx' into 'main'
Signed-off-by: Tianling Shen <cnsztl@immortalwrt.org>
John Audia [Wed, 13 Dec 2023 20:54:50 +0000 (15:54 -0500)]
kernel: bump 5.15 to 5.15.143
Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.143
Removed upstreamed:
generic/backport-5.15/795-v6.6-12-r8152-Rename-RTL8152_UNPLUG-to-RTL8152_INACCESSIBLE.patch[1]
Manually rebased:
mediatek/patches-5.15/100-dts-update-mt7622-rfb1.patch
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v5.15.143&id=
00beca907a7be61da935bb687f9601420fc5f8a8
Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Wed, 13 Dec 2023 19:52:38 +0000 (14:52 -0500)]
kernel: bump 6.1 to 6.1.68
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.68
Removed upstreamed:
generic/backport-6.1/795-v6.6-12-r8152-Rename-RTL8152_UNPLUG-to-RTL8152_INACCESSIBLE.patch[1]
Manually rebased:
mediatek/patches-6.1/100-dts-update-mt7622-rfb1.patch
All other patches automatically rebased.
1. https://git.kernel.org/pub/scm/linux/kernel/git/stable/linux.git/commit/?h=v6.1.68&id=
3759e735562a31e44fee825498f05c06e64b25a8
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
Felix Fietkau [Tue, 19 Dec 2023 09:53:41 +0000 (10:53 +0100)]
toolchain/gdb: add pthread to CFLAGS/LDFLAGS for zstd
Works around a build issue when building on a host with an older glibc,
where it would fail to detect ELF support in libbfd
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Daniel Golle [Mon, 18 Dec 2023 21:22:12 +0000 (21:22 +0000)]
mvebu: fix RTC of IEI-World Puzzle M90x devices
The Puzzle devices come with an I2C-connected Epson RX8130 RTC.
Disable the (dysfunctional) RTC units of the SoC and add driver
kmod-rtc-ds1307 to support the Epson RX8130 instead.
Tested-by: Thomas Huehn <thomas.huehn@hs-nordhausen.de>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Felix Fietkau [Mon, 18 Dec 2023 17:54:55 +0000 (18:54 +0100)]
mt76: update to Git HEAD (2023-12-18)
bebd9cffc2ae wifi: mt76: mt7921: fix 6GHz disabled by the missing default CLC config
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Nick Hainke [Mon, 18 Dec 2023 00:43:49 +0000 (01:43 +0100)]
tools/cmake: update to 3.28.1
Release Notes:
https://www.kitware.com/cmake-3-28-1-available-for-download/
Signed-off-by: Nick Hainke <vincent@systemli.org>
Felix Fietkau [Mon, 18 Dec 2023 10:48:59 +0000 (11:48 +0100)]
netifd: update to Git HEAD (2023-12-18)
730b4656e6b1 netifd: fix undefined va_list value which can cause crashes
c59457f69709 device: Log error message if device initialization failed
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 12 Nov 2023 21:20:41 +0000 (22:20 +0100)]
toolchain/gdb: export ZSTD_CFLAGS/LIBS to fix build on non-linux systems
Avoids picking up libs and header files from musl
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rafał Miłecki [Sun, 17 Dec 2023 21:35:13 +0000 (22:35 +0100)]
kernel: backport NVMEM changes queued for v6.8
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Sun, 17 Dec 2023 20:23:44 +0000 (21:23 +0100)]
kernel: backport upstream brcm_nvram fix for NAND controller
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Sander Vanheule [Sun, 17 Dec 2023 18:36:24 +0000 (19:36 +0100)]
firmware-utils: update to git HEAD
Adds two changes improving compatibility with supported TP-Link devices.
5e14973d2199 tplink-safeloader: add Archer A6 v2 (RU)
d87b6c4b6423 tplink-safeloader: bump EAP615-Wall compat_level
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Sander Vanheule [Sun, 17 Dec 2023 16:42:28 +0000 (17:42 +0100)]
tools: firmware-utils: update to git HEAD
Adds two changes improving compatibility with supported TP-Link devices.
5e14973d2199 tplink-safeloader: add Archer A6 v2 (RU)
d87b6c4b6423 tplink-safeloader: bump EAP615-Wall compat_level
Signed-off-by: Sander Vanheule <sander@svanheule.net>
Christian Marangi [Sun, 17 Dec 2023 16:35:18 +0000 (17:35 +0100)]
netifd: update to Git HEAD (2023-12-17)
66a7652176a7 system-linux: set pending to 0 on ifindex found or error for if_get_master
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Thibaut VARÈNE [Mon, 11 Dec 2023 14:23:03 +0000 (15:23 +0100)]
dnsmasq: invert logic for "localuse"
Prior to this commit, "localuse" (which enables local resolving through
dnsmsasq) was off by "default". That default was in turn overridden when
"noresolv" was unset (which itself is the default for "noresolv") *and*
"resolvfile" was "/tmp/resolv.conf.d/resolv.conf.auto" (also the default
for this parameter).
In other words, the "default" unset value for "localuse" would only be
ever used in specific *non-default* configurations.
However, the problem with that logic is that a user who wants to ignore
their ISP-provided resolvers by setting "noresolv" to true ends up with
a device that will *only use* said resolvers for local DNS queries,
serving clients' queries via dnsmasq (which now ignores the ISP
resolvers). This can lead to confusion and break random setups as the
DNS lookup performed on clients behalf can differ in their replies from
DNS lookups performed locally on the router.
Furthermore, "localuse" is not configurable through Luci, contrary to
the other two involved settings, adding further confusion for the end
user.
To work around this situation, the logic that sets "localuse" is
inverted: "localuse" now defaults to on by default, and IFF "noresolv"
is unset (default) AND "resolvfile" is changed from default THEN
"localuse" gets turned back off, allowing for more sensible behaviour.
"localuse" value set in config/dhcp still overrides the logic in all
cases, as it did already.
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Christian Marangi [Fri, 15 Dec 2023 15:02:19 +0000 (16:02 +0100)]
generic: 6.1: fix list_count_nodes backport patch
Commit
25746a3fa2da ("drm/i915: fix up merge with usb-next branch") was
internally applied to the 5.15 patch but wasn0t applied to the backport
for kernel 6.1. Apply the same treatement also there to fix compilation
warning.
Fixes: a14240d384af ("kernel: backport list_count_nodes()")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Furong Xu [Wed, 13 Dec 2023 05:43:43 +0000 (13:43 +0800)]
rockchip: make SMP affinity of RTL8152 on XHCI more robust
XHCI bus numbers are assigned dynamically, it may varies among boards,
match the device irq name with regexp, drop the hardcoded name.
Signed-off-by: Furong Xu <xfr@outlook.com>
Pawel Dembicki [Fri, 8 Dec 2023 08:32:41 +0000 (09:32 +0100)]
kirkwood: backport fix Ctera C200 V1 ubi part name to 6.1
From the original Patch:
|In
749237967a12 downstream dts was replaced with upstream accepted
|patch. But in upstream version last partition was called "rootfs"
|instead "ubi". OpenWrt require "ubi" label for ubi rootfs.
|This patch restore proper label.
|
|Fixes:
749237967a12 ("kirkwood: Replace dtses with upstream accepted")
|
|Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(patch updated to include 6.1, dropped label properties)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Rafał Miłecki [Fri, 15 Dec 2023 10:43:08 +0000 (11:43 +0100)]
kernel: backport list_count_nodes()
It's needed by various stuff we backport. That includes NVMEM changes
queued for v6.8.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Chukun Pan [Sat, 3 Jun 2023 15:20:13 +0000 (23:20 +0800)]
ipq807x: add support for ZTE MF269
Hardware specifications:
SoC: Qualcomm IPQ8071A
RAM: 512MB of DDR3
Flash1: Eon EN25S64 8MB
Flash2: MX30UF2G18AC 256MB
Ethernet: 2x 2.5G RJ45 port
Phone: 1x RJ11 port (SPI)
USB: 1x Type-C 2.0 port
WiFi1: QCN5024 2.4GHz
WiFi2: QCN5054 5GHz
Button: Reset, WPS
Flash instructions:
1. Connect the router via serial port (115200 8N1 1.8V)
2. Download the initramfs image, rename it to initramfs.bin,
and host it with the tftp server.
3. Interrupt U-Boot and run these commands:
tftpboot initramfs.bin
bootm
4. After openwrt boots up, use scp or luci web
to upload sysupgrade.bin to upgrade.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Robert Marko <robimarko@gmail.com>
Raylynn Knight [Fri, 1 Dec 2023 05:17:07 +0000 (00:17 -0500)]
realtek: Clean up and standardize realtek-poe support
This patch cleans up and standardizes realtek-poe support for realtek
based switches that have supported PoE ports.
The power output of switches supported by realtek-poe package can be
configured in the 02_network ucidef_set_poe() function. This was missed
when some PoE capable switches supported by realtek-poe were added.
The realtek-poe package at one point replaced a lua-rs232 based script
and some devices were not updated to use the realtek-poe package.
Consistently add realtek-poe package to DEVICE_PACKAGES for switches
with supported PoE.
Signed-off-by: Raylynn Knight <rayknight@me.com>
Dirk Buchwalder [Fri, 24 Nov 2023 14:56:39 +0000 (15:56 +0100)]
ipq807x: fix edgecore EAP102 lan/wan
We have a report in the forum, that lan/wan is non-functional
on the EAP102 (https://forum.openwrt.org/t/edgecore-eap102/178449)
Fixing that by swapping label and phy-handle of the dp-nodes and
updating the lan/wan bmp.
Note: the original commiter of the device support seems absent for a
long time in the forum and on the OpenWrt github group.
Tested-by: Antonio Della Selva <antonio.dellaselva@uniurb.it>
Signed-off-by: Dirk Buchwalder <buchwalder@posteo.de>
Reviewed-by: Robert Marko <robimarko@gmail.com>
Chukun Pan [Fri, 25 Aug 2023 15:10:35 +0000 (23:10 +0800)]
ipq807x: add Arcadyan AW1000 support
Hardware specification:
SoC: Qualcomm IPQ8072A
Flash: Toshiba NAND 1GiB
RAM: 1 GiB of DDR3 466 MHz
Ethernet: 4x 1Gbps + 1x 2.5Gbps
WiFi1: QCN5024 2.4GHz ax 4x4
WiFi2: QCN5054 5GHz ax 4x4
Button: WiFi, WPS, Reset
Modem: RG500Q-EA
USB: 1 x USB 3.0
Power: DC 12V 4A
Flash instructions:
1. Download the initramfs image, rename it to
initramfs.bin, and host it with tftp server.
2. Interrupt U-Boot and run these commands:
tftpboot initramfs.bin
bootm
3. After openwrt boots up, use scp or luci web
to upload sysupgrade.bin to upgrade.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Robert Marko <robimarko@gmail.com>
Chukun Pan [Sun, 29 Oct 2023 15:26:06 +0000 (23:26 +0800)]
qualcommax: cleanup whitespace and sort-order
Replace blanks with tabs, also sort base-files alphabetically.
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Robert Marko <robimarko@gmail.com>
Chukun Pan [Fri, 20 Oct 2023 15:30:21 +0000 (23:30 +0800)]
kernel: add support for Toshiba TH58NYG3S0HBAI4
Correct oob size from 128 to 256 for Toshiba TH58NYG3S0HBAI4 flash.
Since it is not ONFI compliant NAND, the model name cannot be read
from anywhere, add a static NAND ID entry to correct this.
However, the NAND ID of this flash is inconsistent with the datasheet.
The actual NAND ID is only 4 ID bytes, the last ID byte is missing.[1]
Maybe this flash is counterfeit, or maybe it's another problem.
Another Toshiba flash had the same problem before. Refer to commit
a83dc6b ("kernel: move Toshiba-TC58NVG0S3H patch to ipq40xx"), put
the patch into qualcommax target to avoid affecting other devices.
The patch is verified on Arcadyan AW1000.
[1] Datasheet available at (the ID table is on page 50):
https://europe.kioxia.com/content/dam/kioxia/newidr/productinfo/datasheet/201910/DST_TH58NYG3S0HBAI4-TDE_EN_31565.pdf
Signed-off-by: Chukun Pan <amadeus@jmu.edu.cn>
Reviewed-by: Robert Marko <robimarko@gmail.com>
Christian Marangi [Wed, 13 Dec 2023 16:03:13 +0000 (17:03 +0100)]
package: kernel: detach of-mdio dependency from stmmac-core
Detach of-mdio dependency from stmmac-core kmod to fix support for
x86_64 target. This target doesn't use OpenFirmware infrastructure and
stmmac-core for the dwmac-intel driver doesn't depends on it.
Add kmod-of-mdio to any other user of stmmac-core as it's not inherit
from stmmac-core anymore.
Fixes: #14209
Fixes: 4b4c940fbc8f ("x86: Add kmod-dwmac-intel")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Wed, 13 Dec 2023 16:00:17 +0000 (17:00 +0100)]
package: kernel: move pcs-xpcs from armsr to generic
Move pcs-xpcs kmod from armsr modules.mk to generic modules package.
Also add additional dependency to x86_64 as stmmac-core it's now used
by x86_64 target and depends on this package.
Fixes: 4b4c940fbc8f ("x86: Add kmod-dwmac-intel")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Rafał Miłecki [Wed, 13 Dec 2023 07:52:59 +0000 (08:52 +0100)]
uboot-envtools: bump PKG_RELEASE
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Tue, 12 Dec 2023 23:02:12 +0000 (00:02 +0100)]
uboot-envtools: fix reading NVMEM device's compatible value
Fixes: fea4ffdef28f ("uboot-envtools: update to 2023.04")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Philip Prindeville [Mon, 11 Dec 2023 06:35:57 +0000 (23:35 -0700)]
base-files: ipcalc.sh: Add tests for unroutable, etc
See RFC-1918, RFC-3927, and RFC-1122.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Philip Prindeville [Sat, 11 Nov 2023 19:37:20 +0000 (12:37 -0700)]
base-files: ipcalc.sh: Add netmask2prefix function
Also add is_contiguous to check if it's a valid netmask.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Philip Prindeville [Sat, 4 Nov 2023 03:11:49 +0000 (21:11 -0600)]
base-files: ipcalc.sh: Add prefix-to-netmask conversion
Seems like it might be used in other places, so factor it into the
library.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Philip Prindeville [Tue, 24 Oct 2023 06:16:25 +0000 (00:16 -0600)]
base-files: ipcalc.sh: Add some commentary, etc.
Explain some of the more obscure logic, or where we deviate from
what the original awk code did. Also, give a count of the usable
addresses on the subnet.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Philip Prindeville [Sun, 22 Oct 2023 19:32:06 +0000 (13:32 -0600)]
base-files: ipcalc.sh: Add support for decimal output
This is useful if you later need to perform numeric range-checking
on addresses, i.e. to see if an address falls inside a CIDR range,
etc. and what interface it corresponds to.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Philip Prindeville [Sun, 22 Oct 2023 19:27:50 +0000 (13:27 -0600)]
base-files: ipcalc.sh: Rewrite in pure shell
Also add better error checking on input.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
Furong Xu [Tue, 12 Dec 2023 08:12:12 +0000 (16:12 +0800)]
rockchip: fix eth1 irq affinity
NanoPi R2S and some other RK3328 boards use RTL8152 as eth1,
which is connected to xhci-hcd:usb1 but not xhci-hcd:usb3
|:~# cat /proc/interrupts
| CPU0 CPU1 CPU2 CPU3
| 11: 53449 171813 129595 87823 GICv2 30 Level arch_timer
| 18: 0 0 0 0 GICv2 94 Level rockchip_usb2phy
| 19: 0 0 0 0 GICv2 32 Level
ff1f0000.dma-controller
| 20: 0 0 0 0 GICv2 33 Level
ff1f0000.dma-controller
| 21: 4 0 0 0 GICv2 89 Level ttyS2
| 22: 0 0 0 0 GICv2 43 Level
ff350800.iommu
| 23: 0 0 0 0 GICv2 106 Level
ff360480.iommu
| 24: 0
1417932 0 0 GICv2 56 Level eth0
| 25: 334 0 0
4422194 GICv2 99 Level xhci-hcd:usb1
| 26: 0 0 0 0 GICv2 48 Level ehci_hcd:usb3
| 27: 0 0 0 0 GICv2 49 Level ohci_hcd:usb2
| 28: 3285 0 0 0 GICv2 69 Level
ff160000.i2c
| 29: 0 0 0 0 rockchip_gpio_irq 24 Level rk805
| 30: 0 0 0 0 rk805 0 Edge rk805_pwrkey_fall
| 35: 0 0 0 0 rk805 5 Edge RTC alarm
| 37: 0 0 0 0 rk805 7 Edge rk805_pwrkey_rise
| 38: 0 0 0 0 GICv2 90 Level rockchip_thermal
| 39: 0 0 0 0 GICv2 72 Edge
ff1a0000.watchdog
| 40: 2601 0 0 0 GICv2 44 Level dw-mci
| 41: 0 0 0 0 rockchip_gpio_irq 0 Edge keys
|IPI0: 1559 1208 893 1131 Rescheduling interrupts
|[...]
Fix 40-net-smp-affinity to match the correct device irq name.
Signed-off-by: Furong Xu <xfr@outlook.com>
Eric J. Anderson [Mon, 4 Dec 2023 21:41:47 +0000 (22:41 +0100)]
ath79: make boot-leds service executable
This service was unfunctional due to not having its executable bit
set.
Fixes #13500.
Signed-off-by: Eric J. Anderson <eric.j.ason256@gmail.com>
Lech Perczak [Wed, 15 Nov 2023 00:53:49 +0000 (01:53 +0100)]
imx: enable CONFIG_CPU_FREQ_THERMAL
Without that, imx_thermal fails to initialize on deferred probe, because
it fails to register cpufreq cooling device.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Lech Perczak [Wed, 15 Nov 2023 02:03:26 +0000 (03:03 +0100)]
imx: imx7d-pico-pi: add CPU supply nodes to device tree
Attach sw1a as "cpu-supply" to both CPUs in order to cpufreq driver to
prove successfully.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Lech Perczak [Wed, 15 Nov 2023 02:22:56 +0000 (03:22 +0100)]
imx: enable CONFIG_REGULATOR_PFUZE100 globally
PFUZE100 series of PMICs are used on boards supported by both
subtargets. Enable this for whole i.MX target.
Signed-off-by: Lech Perczak <lech.perczak@gmail.com>
Florian Eckert [Tue, 31 Oct 2023 07:14:21 +0000 (08:14 +0100)]
tools: add ledumon and ledhwbmon packages
ledumon:
This program creates a new userspace LED class device and monitors it.
For this it es using the kmod-leds-uled.ko kernel module.
ledhwbmon:
This program monitors LED brightness level changes having its origin
in hardware/firmware, i.e. outside of kernel control.
Signed-off-by: Florian Eckert <fe@dev.tdt.de>
Pawel Dembicki [Tue, 14 Nov 2023 10:18:36 +0000 (11:18 +0100)]
kirkwood: add 6.1 kernel as testing
It allow to test 6.1 kernel in Kirkwood.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Pawel Dembicki [Tue, 14 Nov 2023 10:17:13 +0000 (11:17 +0100)]
kirkwood: 6.1: refresh kernel config
Done by 'make kernel_oldconfig'.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Pawel Dembicki [Tue, 14 Nov 2023 10:16:40 +0000 (11:16 +0100)]
kirkwood: kernel: refresh 6.1 patches
Kernel patches copied from 5.15 need to be refreshed.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Pawel Dembicki [Tue, 14 Nov 2023 08:09:58 +0000 (09:09 +0100)]
kirkwood: copy config 5.15 to 6.1
Config was just copied.
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Pawel Dembicki [Tue, 14 Nov 2023 08:09:11 +0000 (09:09 +0100)]
kirkwood: copy patches 5.15 to 6.1
Simple copy 5.15 patches.
Upstreamed patch dropped:
001-5.18-Add-Ctera-C-200-V1-board.patch
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
(kirkwoor -> kirkwood in subject)
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Pawel Dembicki [Fri, 8 Dec 2023 08:32:41 +0000 (09:32 +0100)]
kirkwood: fix Ctera C200 V1 ubi part name
In
749237967a12 downstream dts was replaced with upstream accepted
patch. But in upstream version last partition was called "rootfs"
instead "ubi". OpenWrt require "ubi" label for ubi rootfs.
This patch restore proper label.
Fixes: 749237967a12 ("kirkwood: Replace dtses with upstream accepted")
Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
Christian Svensson [Mon, 20 Nov 2023 20:35:26 +0000 (21:35 +0100)]
octeon: upgrade to 6.1 kernel
The kernel patches apply with only minor changes. The only other notable
change is that octeon-usb has moved from staging and had its config
macro renamed from CONFIG_OCTEON_USB to CONFIG_USB_OCTEON_HCD.
Signed-off-by: Christian Svensson <blue@cmd.nu>
Nick Hainke [Mon, 11 Dec 2023 15:48:47 +0000 (16:48 +0100)]
ethtool: update to 6.6
Release Notes:
https://lore.kernel.org/netdev/
20231123220625.q427zyjaogdmlf6d@lion.mk-sys.cz/T/
Signed-off-by: Nick Hainke <vincent@systemli.org>
John Audia [Mon, 11 Dec 2023 11:22:35 +0000 (06:22 -0500)]
kernel: bump 6.1 to 6.1.67
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.67
NO patches affected.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
John Audia [Fri, 8 Dec 2023 12:08:03 +0000 (07:08 -0500)]
kernel: bump 6.1 to 6.1.66
Changelog: https://cdn.kernel.org/pub/linux/kernel/v6.x/ChangeLog-6.1.66
All patches automatically rebased.
Build system: x86/64
Build-tested: x86/64/AMD Cezanne
Run-tested: x86/64/AMD Cezanne
Signed-off-by: John Audia <therealgraysky@proton.me>
Rafał Miłecki [Tue, 12 Dec 2023 11:02:31 +0000 (12:02 +0100)]
kernel: backport upstream nvmem fix for "fixed-layout"
It replaces a pretty much identical downstream patch.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Christian Marangi [Tue, 12 Dec 2023 00:25:01 +0000 (01:25 +0100)]
ipq806x: drop useless uci-defaults compat version script
Drop useless uci-defaults compat version script as it's not needed
anymore and should have been dropped on DSA conversion.
The script was needed for Linksys EA7500 and EA8500 for the kernel space
migration. We now handle compat version setting in board.d scripts.
Having this script with actually the wrong value (2.0) cause upgrade
problem and conflicts with board.d script.
Fixes: 337e36e0ef98 ("ipq806x: convert each device to DSA implementation")
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Christian Marangi [Tue, 12 Dec 2023 00:18:08 +0000 (01:18 +0100)]
netifd: update to Git HEAD (2023-12-12)
8f2806a37fe1 system-linux: set master early on apply settings
e3fc2b0026a5 system-linux: skip refreshing MAC on master change if custom MAC
Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
Nick Hainke [Mon, 11 Dec 2023 15:18:58 +0000 (16:18 +0100)]
tools/cmake: update to 3.28.0
Release Notes:
- https://www.kitware.com/cmake-3-28-0-available-for-download/
Refresh patches:
- 120-curl-fix-libressl-linking.patch
- 130-bootstrap_parallel_make_flag.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Daniel Golle [Sun, 10 Dec 2023 23:09:00 +0000 (23:09 +0000)]
mediatek: bananapi-r3: add overlay for ReSpeaker 2-mic hat
Add DT overlay to allow using the ReSpeaker 2-mic hat connected to
the 26-pin header of the BananaPi BPi-R3.
Supported sample formats: S16_LE, S24_LE, S32_LE
Supported sample rates: 8/12/16/24/32/48/96/192 kHz
| BPi-R3 | ReSpeaker 2-mic
Signal | 26-pin | 40-pin
----------+----------+-------------------
VCC 5V | 2 | 2
I2C SDA | 3 | 3
I2C SCL | 5 | 5
GND | 6 | 6
PCM CLK | 12 | 12
PCM FS | 15 | 35
PCM DIN | 26 | 38
GND | 25 | 39
PCM DOUT | 22 | 40
Once connected, install the driver and tell U-Boot to apply the DT
overlay:
opkg kmod-sound-soc-mt7986-wm8960
fw_setenv bootconf_base "config-mt7986a-bananapi-bpi-r3#mt7986a-bananapi-bpi-r3-respeaker-2mics"
reboot
To setup the ReSpeaker for Stereo out on the Headphone plug:
amixer sset 'Right Output Mixer PCM' on
amixer sset 'Left Output Mixer PCM' on
amixer sset 'PCM Playback -6dB' off
amixer sset 'O018 I150_Switch' on
amixer sset 'O019 I151_Switch' on
amixer sset 'O124 I032_Switch' on
amixer sset 'O125 I033_Switch' on
amixer sset 'Headphone' 121
amixer sset 'Playback' 255
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Thu, 28 Sep 2023 18:13:23 +0000 (19:13 +0100)]
kernel: modules: package MT7986 audio drivers
Packages the audio drivers for the MediaTek MT7986 SoC used with
Wolfson WM8960 codec.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Daniel Golle [Mon, 11 Dec 2023 00:24:40 +0000 (00:24 +0000)]
kernel: modules: break-out WM8960 codec module
Package codec module for WM8960 in its own package to be used by more
than one target.
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Maso Huang [Thu, 7 Sep 2023 08:40:19 +0000 (16:40 +0800)]
mediatek: backport MT7986 audio driver
Pick commits adding drivers for audio engine found in MT7986 from
Linux 6.6 as well as follow-up fixes from Linux 6.7.
Signed-off-by: Maso Huang <maso.huang@mediatek.com>
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
John Audia [Fri, 8 Dec 2023 13:12:51 +0000 (08:12 -0500)]
kernel: bump 5.15 to 5.15.142
Changelog: https://cdn.kernel.org/pub/linux/kernel/v5.x/ChangeLog-5.15.142
All patches automatically rebased.
Build system: x86_64
Build-tested: ramips/tplink_archer-a6-v3
Run-tested: ramips/tplink_archer-a6-v3
Signed-off-by: John Audia <therealgraysky@proton.me>
Nick Hainke [Sat, 11 Nov 2023 03:18:18 +0000 (04:18 +0100)]
iproute2: update to 6.6.0
Release Notes:
https://lore.kernel.org/netdev/
20231106090325.
07092c87@hermes.local/T/
Automatically refreshed:
- 115-add-config-xtlibdir.patch
- 175-reduce-dynamic-syms.patch
- 195-build_variant_ip_tc.patch
Signed-off-by: Nick Hainke <vincent@systemli.org>
Nick Hainke [Sat, 11 Nov 2023 03:23:58 +0000 (04:23 +0100)]
strace: update to 6.6
Release Notes:
https://github.com/strace/strace/releases/tag/v6.6
Signed-off-by: Nick Hainke <vincent@systemli.org>
projects / openwrt / staging / robimarko.git / log