Andres Rodriguez [Fri, 24 Feb 2017 18:20:57 +0000 (13:20 -0500)]
drm/amdgpu: make trace format uniform csv name=value
Most of the traces have uniform format except for two of them. Having
all the traces match makes it simple to run awk on the ftrace output.
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Andres Rodriguez <andresx7@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiangliang Yu [Mon, 6 Mar 2017 07:27:51 +0000 (15:27 +0800)]
drm/amdgpu/gfx8: move CE&DE meta data structure to vi_structs.h
Because different HWs have different definition for CE & DE meta
data, follow mqd design to move the structures to vi_structs.h.
And change the prefix from amdgpu to vi as the structures is only
for VI family.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Junshan Fang [Thu, 19 Jan 2017 02:36:18 +0000 (10:36 +0800)]
drm/amd/amdgpu: add DID for Polaris10
Signed-off-by: Junshan Fang <Junshan.Fang@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 3 Mar 2017 17:57:37 +0000 (12:57 -0500)]
drm/amdgpu: add polaris12 to virtual dce handling
Was missed when polaris12 support was added.
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 15 Nov 2016 13:15:28 +0000 (08:15 -0500)]
drm/amdgpu: remove unused sync testing
Not used in a while.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Wed, 1 Mar 2017 21:49:06 +0000 (16:49 -0500)]
drm/amd/powerplay: simplify avfs control code in smu7
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Wed, 1 Mar 2017 20:56:17 +0000 (15:56 -0500)]
drm/amd/powerplay: add function avfs control in smu7
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Wed, 1 Mar 2017 20:49:31 +0000 (15:49 -0500)]
drm/amd/powerplay: add voltage change support through pp_table
Disable avfs to make voltage change take effect.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Andy Shevchenko [Thu, 1 Dec 2016 01:21:10 +0000 (03:21 +0200)]
drm/radeon: remove useless and potentially wrong message
There is no need to repeat information that printed by PCI core at boot time.
Besides that printing was potentially wrong since resource_size_t might be
bigger than 32 bits and there is a dedicated specifier for such type, i.e.
%pap. Someone can fix it and use even better approach, i.e. %pR.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Rex Zhu [Mon, 6 Mar 2017 03:33:25 +0000 (11:33 +0800)]
drm/amdgpu: print full bios version in dmesg.
v2: fix merge error.
Signed-off-by: Rex Zhu <Rex.Zhu@amd.com>
Reviewed-by: Xiaojie Yuan <Xiaojie.Yuan@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 17 Feb 2017 14:04:31 +0000 (15:04 +0100)]
drm/amdgpu: disable HDP flushes on APUs
We completely bypass the HDP now.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joe Perches [Tue, 28 Feb 2017 12:55:52 +0000 (04:55 -0800)]
gpu: drm: amd/radeon: Convert printk(KERN_<LEVEL> to pr_<level>
Use a more common logging style.
Miscellanea:
o Coalesce formats and realign arguments
o Neaten a few macros now using pr_<level>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joe Perches [Tue, 28 Feb 2017 01:31:03 +0000 (17:31 -0800)]
drm: Use pr_cont where appropriate
Using 'printk("\n")' is not preferred anymore and
using printk to continue logging messages now produces
multiple line logging output unless the continuations
use KERN_CONT.
Convert these uses to appropriately use pr_cont or a
single printk where possible.
Miscellanea:
o Use a temporary const char * instead of multiple printks
o Remove trailing space from logging by using a leading space instead
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Thu, 17 Nov 2016 20:40:22 +0000 (15:40 -0500)]
drm/amdgpu: put gtt at 0 in the internal address space
There still seem to be some blocks that make accesses
in the lower part of the address space. This works around
this.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Fri, 17 Feb 2017 18:50:15 +0000 (13:50 -0500)]
drm/amdgpu/vce2: fix vce bar programming
Program the VCE BAR and offsets properly. The current code
was carried over from a limitation from older VCE versions.
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Joe Perches [Fri, 17 Feb 2017 07:11:30 +0000 (23:11 -0800)]
drivers/gpu: Convert remaining uses of pr_warning to pr_warn
To enable eventual removal of pr_warning
This makes pr_warn use consistent for drivers/gpu
Prior to this patch, there were 15 uses of pr_warning and
20 uses of pr_warn in drivers/gpu
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Joe Perches <joe@perches.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Geert Uytterhoeven [Fri, 17 Feb 2017 15:36:38 +0000 (16:36 +0100)]
drm/amd: Spelling s/SDMA_WRTIE_SUB_OPCODE_TILED/SDMA_WRITE_SUB_OPCODE_TILED/
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Geert Uytterhoeven <geert+renesas@glider.be>
Cc: Alex Deucher <alexander.deucher@amd.com>
Cc: Christian König <christian.koenig@amd.com>
Cc: dri-devel@lists.freedesktop.orgamd-gfx@lists.freedesktop.org
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Lyude [Wed, 22 Feb 2017 21:34:53 +0000 (16:34 -0500)]
drm/radeon/dp_auxch: Ratelimit aux transfer debug messages
Aux transfers always fail with non-zero status flags when there's
nothing connected on the port, so we don't usually need to see all of
the debugging information from it. Also, we try reprobing a -lot-, so
without ratelimiting most of the kernel log is filled up with messages
from radeon_dp_aux_transfer_native.
Signed-off-by: Lyude <lyude@redhat.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 22 Feb 2017 16:20:17 +0000 (11:20 -0500)]
drm/amdgpu/powerplay: enable LEDs on Fiji boards
This enables the LEDs that light up based on DPM states
on some Fiji boards.
bug:
https://bugs.freedesktop.org/show_bug.cgi?id=97590
Reviewed-by: Huang Rui <ray.huang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Junwei Zhang [Tue, 21 Feb 2017 02:32:37 +0000 (10:32 +0800)]
drm/amdgpu: rename amdgpu_gca_config to amdgpu_gfx_config
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Trigger Huang [Mon, 20 Feb 2017 02:57:39 +0000 (21:57 -0500)]
drm/amdgpu: Fix module unload hang by KIQ IRQ set
In some cases, manually insmod/rmmod amdgpu is necessary. When
unloading amdgpu, the KIQ IRQ enable/disable function will case
system hang. The root cause is, in the sequence of function
amdgpu_fini, the sw_fini of IP block AMD_IP_BLOCK_TYPE_GFX will be
invoked earlier than that of AMD_IP_BLOCK_TYPE_IH. So continue to use
the variable freed by AMD_IP_BLOCK_TYPE_GFX will cause system hang.
Signed-off-by: Trigger Huang <trigger.huang@amd.com>
Reviewed-by: Xiangliang Yu < Xiangliang.Yu@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 8 Mar 2017 23:27:07 +0000 (18:27 -0500)]
drm/amdgpu: bump driver version for new lds buffer query
v2: agd: bump version
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Junwei Zhang [Fri, 17 Feb 2017 03:05:49 +0000 (11:05 +0800)]
drm/amdgpu: export gfx config double offchip LDS buffers (v3)
v2: move the config struct to drm_amdgpu_info_device
v3: move the config feature to amdgpu_gca_config
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiangliang Yu [Thu, 16 Feb 2017 07:20:04 +0000 (15:20 +0800)]
drm/amdgpu/gfx: free memory of mqd backup
Need to free mqd backup when destroying ring.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiangliang Yu [Thu, 16 Feb 2017 07:07:06 +0000 (15:07 +0800)]
drm/amdgpu/virt: fix typo
When send messages to hypervior, the messages format should be is
idh_request, not idh_event.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Xiangliang Yu [Fri, 17 Feb 2017 08:03:10 +0000 (16:03 +0800)]
drm/amdgpu: change pointer of mqd_ptr & mqd_backup to void
vi_mqd is only used by VI family but mqd_ptr and mqd_backup is
common for all ASIC, so change the pointer to void.
Signed-off-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 26 Jan 2017 07:36:37 +0000 (15:36 +0800)]
drm/amdgpu:fix kiq_resume routine (V2)
v2:
use in_rest to fix compute ring test failure issue
which occured after FLR/gpu_reset.
we need backup a clean status of MQD which was created in drv load
stage, and use it in resume stage, otherwise KCQ and KIQ all may
faild in ring/ib test.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 8 Feb 2017 08:51:06 +0000 (16:51 +0800)]
drm/amdgpu:use clear_ring to clr RB
In resume routine, we need clr RB prior to the
ring test of engine, otherwise some engine hang
duplicated during GPU reset.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 8 Feb 2017 08:49:46 +0000 (16:49 +0800)]
drm/amdgpu:imple ring clear
we can use it clear ring buffer instead of fullfill
0, which is not correct for engine
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 26 Jan 2017 07:33:52 +0000 (15:33 +0800)]
drm/amdgpu:alloc mqd backup
this is required for restoring the mqds after GPU reset.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 26 Jan 2017 07:32:16 +0000 (15:32 +0800)]
drm/amdgpu:new field in_reset introduced for gfx
use it to seperate driver load and gpu reset/resume
because gfx IP need different approach for different
hw_init trigger source
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 26 Jan 2017 07:31:15 +0000 (15:31 +0800)]
drm/amdgpu:RUNTIME flag should clr later
this flag will get cleared by request gpu access
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 6 Feb 2017 05:56:47 +0000 (13:56 +0800)]
drm/amdgpu:use work instead of delay-work
no need to use a delay work since we don't know how
much time hypervisor takes on FLR, so just polling
and waiting in a work.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 25 Jan 2017 08:49:32 +0000 (16:49 +0800)]
drm/amdgpu:no kiq for mailbox registers access
Use no kiq version reg access due to:
1) better performance
2) INTR context consideration (some routine in mailbox is in
INTR context e.g.xgpu_vi_mailbox_rcv_irq)
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Ken Xue [Wed, 25 Jan 2017 05:14:17 +0000 (13:14 +0800)]
drm/amdgpu:Refine handshake of mailbox
Signed-off-by: Ken Xue <Ken.Xue@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 25 Jan 2017 07:07:40 +0000 (15:07 +0800)]
drm/amdgpu:impl RREG32 no kiq version
some registers are PF & VF copy, and we can safely use
mmio method to access them.
and sometime we are forbid to use kiq to access registers
for example in INTR context.
we need a MACRO that always disable KIQ for regs accessing
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Xiangliang Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 8 Feb 2017 07:10:24 +0000 (15:10 +0800)]
drm/amdgpu:use MACRO like other places
Change-Id: Ica8f86577a50d817119de4b4fb95068dc72652a9
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicolai Hähnle [Thu, 16 Feb 2017 10:01:44 +0000 (11:01 +0100)]
drm/amdgpu: simplify reservation handling during buffer creation
By using ttm_bo_init_reserved instead of the manual initialization of
the reservation object, the reservation lock will be properly unlocked
and destroyed when the TTM BO initialization fails.
Actual deadlocks caused by the missing unlock should have been fixed
by "drm/ttm: never add BO that failed to validate to the LRU list",
superseding the flawed fix in commit
38fc4856ad98 ("drm/amdgpu: fix
a potential deadlock in amdgpu_bo_create_restricted()").
This change fixes remaining recursive locking errors that can be seen
with lock debugging enabled, and avoids the error of freeing a locked
mutex.
As an additional minor bonus, buffers created with resv == NULL and
the AMDGPU_GEM_CREATE_VRAM_CLEARED flag are now only added to the
global LRU list after the fill commands have been issued.
v2: use amdgpu_bo_unreserve instead of ttm_bo_unreserve
Fixes: 12a852219583 ("drm/amdgpu: improve AMDGPU_GEM_CREATE_VRAM_CLEARED handling (v2)")
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicolai Hähnle [Thu, 16 Feb 2017 09:56:40 +0000 (10:56 +0100)]
drm/ttm: add ttm_bo_init_reserved
This variant of ttm_bo_init returns the validated buffer object with
the reservation lock held when resv == NULL. This is convenient for
callers that want to use the BO immediately, e.g. for initializing its
contents.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicolai Hähnle [Tue, 14 Feb 2017 09:37:41 +0000 (10:37 +0100)]
drm/ttm: fix the documentation of ttm_bo_init
As the comment says: callers of ttm_bo_init cannot rely on having the
only reference to the BO when the function returns successfully.
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicolai Hähnle [Tue, 14 Feb 2017 08:47:36 +0000 (09:47 +0100)]
Revert "drm/amdgpu: fix a potential deadlock in amdgpu_bo_create_restricted()"
This reverts commit
38fc4856ad98f230bc91da0421dec69e4aee40f8, which
introduces a use-after-free.
The underlying bug should be properly fixed with "drm/ttm: never add BO
that failed to validate to the LRU list".
Cc: zhoucm1 <david1.zhou@amd.com>
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Nicolai Hähnle [Tue, 14 Feb 2017 08:37:12 +0000 (09:37 +0100)]
drm/ttm: never add BO that failed to validate to the LRU list
Fixes a potential race condition in amdgpu that looks as follows:
Task 1: attempt ttm_bo_init, but ttm_bo_validate fails
Task 1: add BO to global list anyway
Task 2: grabs hold of the BO, waits on its reservation lock
Task 1: releases its reference of the BO; never gives up the
reservation lock
The patch "drm/amdgpu: fix a potential deadlock in
amdgpu_bo_create_restricted()" attempts to fix that by releasing
the reservation lock in amdgpu code; unfortunately, it introduces
a use-after-free when this race _doesn't_ happen.
This patch should fix the race properly by never adding the BO
to the global list in the first place.
Cc: zhoucm1 <david1.zhou@amd.com>
Signed-off-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Tested-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Deucher [Wed, 8 Mar 2017 23:25:15 +0000 (18:25 -0500)]
drm/amdgpu: expose GPU sensor related information
This includes shader/memory clocks, temperature, GPU load, etc.
v2: - add sub-queries for AMDPGU_INFO_GPU_SENSOR_*
- do not break the ABI
v3: - return -ENOENT when amdgpu_dpm == 0
- expose more sensor queries
v4: - s/GPU_POWER/GPU_AVG_POWER/
- improve VDDNB/VDDGFX query description
- fix amdgpu_dpm check
v5: - agd: fix warning
v6: - agd: bump version
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samuel Pitoiset [Wed, 15 Feb 2017 18:32:29 +0000 (19:32 +0100)]
drm/amdgpu: expose amdgpu_sensors on pre-powerplay chips
read_sensor() has been recently implemented for dpm based boards
which means amdgpu_sensors can now be exposed.
v2: - make sure read_sensor is not NULL on dpm chips
- keep sanity check for powerplay chips
v3: - make sure amdgpu_dpm != 0
Cc: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Tom St Denis <tom.stdenis@amd.com>
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Samuel Pitoiset [Tue, 14 Feb 2017 00:00:49 +0000 (01:00 +0100)]
drm/amdgpu: implement read_sensor() for pre-powerplay chips
Add the GPU temperature, the shader clock and eventually the
memory clock (as well as the GPU load on CI). The main goal is
to expose this info to the userspace like Radeon.
v2: - add AMDGPU_PP_SENSOR_GPU_LOAD on CI
- update the commit description
Signed-off-by: Samuel Pitoiset <samuel.pitoiset@gmail.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Marek Olšák [Mon, 13 Feb 2017 16:37:05 +0000 (17:37 +0100)]
drm/radeon: allow unaligned shader loads on CIK
Set alignment mode to unaligned on CIK to align with amdgpu. This is
needed for unaligned loads to work properly in mesa. The current setting
requires dword alignment.
Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 14 Feb 2017 15:02:52 +0000 (16:02 +0100)]
drm/amdgpu: fix PRT teardown on VM fini v3
v2: new approach fixing this by registering a fence callback for
all users of the VM on teardown
v3: agd: rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 14 Feb 2017 14:47:03 +0000 (15:47 +0100)]
drm/amdgpu: add OOM fallback on PRT teardown (v2)
Don't assume kmalloc will always succeed.
v2: agd: rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Tue, 14 Feb 2017 13:50:50 +0000 (14:50 +0100)]
drm/amdgpu: minor PRT turnoff fix (v2)
When two VMs stop using PRT support at the same time we might
not disable it in the right order otherwise.
v2: agd: rebase
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Alex Xie [Wed, 15 Feb 2017 19:10:19 +0000 (14:10 -0500)]
drm/amdgpu: change pte definitions to 64 bit
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Xie <AlexBin.Xie@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 13 Feb 2017 13:22:58 +0000 (14:22 +0100)]
drm/amdgpu: fix PTE defines
Those should be 64bit, even on a 32bit system.
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Tom St Denis [Thu, 9 Feb 2017 19:29:01 +0000 (14:29 -0500)]
drm/amd/amdgpu: Update read_sensor calls to have size parameter (v3)
This update allows sensors to return more than 1 value and
indicates to the caller how many bytes are written.
The debugfs interface has been updated to handle reading all
of the values. Simply seek to the enum value (multiplied
by 4) and then read as many bytes as the sensor provides.
(v2): Don't set size to 4 before reading GPU_POWER
(v3): agd: rebase
Signed-off-by: Tom St Denis <tom.stdenis@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 18 Jan 2017 12:40:48 +0000 (13:40 +0100)]
drm/amdgpu: implement PRT for GFX8 v2
Enable/disable the handling globally for now and
print a warning when we enable it for the first time.
v2: set correct register
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Wed, 18 Jan 2017 12:37:21 +0000 (13:37 +0100)]
drm/amdgpu: implement PRT for GFX7 v2
Enable/disable the handling globally for now and
print a warning when we enable it for the first time.
v2: set correct register
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Fri, 27 Jan 2017 10:56:05 +0000 (11:56 +0100)]
drm/amdgpu: implement PRT for GFX6 v2
Enable/disable the handling globally for now and
print a warning when we enable it for the first time.
v2: write to the correct register, adjust bits to that hw generation
v3: fix compilation, add the missing register bit definitions
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Junwei Zhang [Mon, 16 Jan 2017 05:59:01 +0000 (13:59 +0800)]
drm/amdgpu: IOCTL interface for PRT support v4
Till GFX8 we can only enable PRT support globally, but with the next hardware
generation we can do this on a per page basis.
Keep the interface consistent by adding PRT mappings and enable
support globally on current hardware when the first mapping is made.
v2: disable PRT support delayed and on all error paths
v3: PRT and other permissions are mutal exclusive,
PRT mappings don't need a BO.
v4: update PRT mappings durign CS as well, make va_flags 64bit
Signed-off-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 30 Jan 2017 10:09:31 +0000 (11:09 +0100)]
drm/amdgpu: add basic PRT support (v2)
Future hardware generations can handle PRT flags on a per page basis,
but current hardware can only turn it on globally.
Add the basic handling for both, a global callback to enable/disable
triggered by setting a per mapping flag.
v2: agd: rebase fixes
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Christian König [Mon, 30 Jan 2017 10:01:38 +0000 (11:01 +0100)]
drm/amdgpu: add support for BO_VAs without BO v2
For PRT support we need mappings which aren't backed by any memory.
v2: fix parameter checking
Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Nicolai Hähnle <nicolai.haehnle@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 9 Feb 2017 03:55:49 +0000 (11:55 +0800)]
drm/amdgpu:use hw_init for sriov_gpu_reset
no suspend invoked so after VF FLR by host, we just
call hw_init to reinitialize IPs.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Tue, 7 Feb 2017 16:46:21 +0000 (11:46 -0500)]
drm/amd/powerplay: implement gpu power display for smu7_hwmgr
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Tue, 24 Jan 2017 21:59:27 +0000 (16:59 -0500)]
drm/amd/powerplay: add power consumption display support in debugfs
The additional output are:
vddc power in Watt;
vddci power in Watt;
max gpu power in Watt;
average gpu power in Watt.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Tue, 7 Feb 2017 21:37:48 +0000 (16:37 -0500)]
drm/amd/powerplay: change parameter type pointer from int32_t to void in read sensor
As well as fix print format for uint32_t type.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Fri, 14 Oct 2016 18:21:19 +0000 (14:21 -0400)]
drm/amd/amdgpu: add power profile support for CI
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Tue, 24 Jan 2017 15:57:22 +0000 (10:57 -0500)]
drm/amd/powerplay: add power profile support for Polaris
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Tue, 24 Jan 2017 15:56:21 +0000 (10:56 -0500)]
drm/amd/powerplay: add power profile support for Fiji
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Tue, 24 Jan 2017 15:53:39 +0000 (10:53 -0500)]
drm/amd/powerplay: add power profile support for tonga
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Tue, 24 Jan 2017 15:47:25 +0000 (10:47 -0500)]
drm/amd/powerplay: add power profile support for SMU7
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Thu, 6 Oct 2016 21:57:40 +0000 (17:57 -0400)]
drm/amd/powerplay: reapply power profile when force dpm level to auto
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Eric Huang [Mon, 12 Sep 2016 20:17:44 +0000 (16:17 -0400)]
drm/amd/amdgpu: add power profile sysfs entry
Add the sysfs entries pp_gfx_power_profile and
pp_compute_power_profile which give user a way to set
power profile through parameters minimum sclk, minimum mclk,
activity threshold, up hysteresis and down hysteresis only
when the entry power_dpm_force_performance_level is in
default value "auto". It is read and write. Example:
echo 500 800 20 0 5 > /sys/class/drm/card0/device/pp_*_power_profile
cat /sys/class/drm/card0/device/pp_*_power_profile
500 800 20 0 5
Note: first parameter is sclk in MHz, second is mclk in MHz,
third is activity threshold in percentage, fourth is up hysteresis
in ms and fifth is down hysteresis in ms.
echo set > /sys/class/drm/card0/device/pp_*_power_profile
To set power profile state if it exists.
echo reset > /sys/class/drm/card0/device/pp_*_power_profile
To restore default state and clear previous setting.
Signed-off-by: Eric Huang <JinHuiEric.Huang@amd.com>
Acked-by: Rex Zhu <Rex.Zhu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 9 Feb 2017 05:42:27 +0000 (13:42 +0800)]
drm/amdgpu:cleanup no needed braces
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Thu, 9 Feb 2017 05:41:53 +0000 (13:41 +0800)]
drm/amdgpu:don't return error for debugfs failed
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 25 Jan 2017 07:48:01 +0000 (15:48 +0800)]
drm/amdgpu:add lock_reset for SRIOV
this lock is used for sriov_gpu_reset, only get this mutex
can run into sriov_gpu_reset.
we have couple source triggers gpu_reset for SRIOV:
1) submit timedout and trigger reset voluntarily
2) invalid instruction detected by ENGINE and trigger reset voluntarily
2) hypervisor found world switch hang and trigger flr and notify guest to
do reset.
all need take care and we need a mutex to protect the consistency of
reset routine.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 25 Jan 2017 07:33:56 +0000 (15:33 +0800)]
drm/amdgpu:change kiq lock name
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 23 Jan 2017 06:22:08 +0000 (14:22 +0800)]
drm/amdgpu:implement SRIOV gpu_reset (v2)
implement SRIOV gpu_reset for future use.
it wil be called from:
1) job timeout
2) privl access or instruction error interrupt
3) hypervisor detect VF hang
v2: agd: rebase on upstream
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 6 Feb 2017 08:46:36 +0000 (16:46 +0800)]
drm/amdgpu:divide KCQ mqd init to sw and hw
sw part only invoked once during sw_init.
hw part invoked during first drv load and resume later.
that way we cannot alloc mqd in hw/resume, we only keep
mqd allocted in sw_init routine.
and hw_init routine only kmap and set it.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 6 Feb 2017 08:35:54 +0000 (16:35 +0800)]
drm/amdgpu:minor cleanup
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 6 Feb 2017 08:34:04 +0000 (16:34 +0800)]
drm/amdgpu:no need use sriov vf checks
We ultimately want to re-use this for bare metal,
so no need to have vf checks in the KIQ code itself
since kiq itself is currently only used in VF cases.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 6 Feb 2017 08:31:08 +0000 (16:31 +0800)]
drm/amdgpu:bo_free_kernel will set ptr to NULL if freed
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 6 Feb 2017 08:28:53 +0000 (16:28 +0800)]
drm/amdgpu:imple mqd soft ini/fini
this is for SRIOV fix:
mqd soft init/fini will be invoked by sw_init to
allocate BO for compute MQD resource, instead of
original scheme that hw_init allocates MQD.
because if hw_init allocates MQD, then resume will
allocate MQD, and that lead to memory leak after
driver recovered from hang.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Tue, 24 Jan 2017 10:33:22 +0000 (18:33 +0800)]
drm/damdgpu:add new mqd member in ring
introduce a new mqd member in ring is for later usage.
we need keep a clean version of MQD for the purpose
of recovering compute rings from hang.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Mon, 23 Jan 2017 02:49:33 +0000 (10:49 +0800)]
drm/amdgpu:cg & pg shouldn't active on VF device
CG & PG function changes engine clock/gating, which is
not appropriate for VF device, because one vf doesn't know
the whole picture of engine's overall workload.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pixel Ding [Tue, 24 Jan 2017 03:39:48 +0000 (11:39 +0800)]
drm/amdgpu: clean framebuffer with GPU
CPU is not efficient to clean framebuffer especially under
virtualization, then loading driver takes long time which causes
timeout of mailbox handshake.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Edward O'Callaghan <funfunctor@folklore1984.net>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 8 Feb 2017 09:38:13 +0000 (17:38 +0800)]
drm/amdgpu:fix amdgpu_sa_bo_new error(v2)
ib_pool init should prior to fbdev_init, otherwise
there will be error from amdgpu_sa_bo_new
(amdgpu_sa.c:323)
fbdev_init will call ttm_validate which further call
amdgpu_sa_bo_new.
v2:
move fbdev_init behind ib test.
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pixel Ding [Mon, 6 Feb 2017 09:32:22 +0000 (17:32 +0800)]
drm/amdgpu/virt: skip VM fault handler for VF
VF uses KIQ to access registers. When VM fault occurs, the driver
can't get back the fence of KIQ submission and runs into CPU soft
lockup.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Junwei Zhang <Jerry.Zhang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Pixel Ding [Tue, 24 Jan 2017 07:04:48 +0000 (15:04 +0800)]
drm/amdgpu/virt: increase mailbox timeout to 5000ms
When multiple VFs try to enter exclusive mode at the same time, the
looping mechansim doesn't help to ensure each can get it because it
only loops active VFs, then the last one has to wait for a long
interval.
Signed-off-by: Pixel Ding <Pixel.Ding@amd.com>
Reviewed-by: Xiangliang.Yu <Xiangliang.Yu@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Wed, 25 Jan 2017 07:55:30 +0000 (15:55 +0800)]
drm/amdgpu:fix powerplay logic
1,like pp_hw_init, we shouldn't report error if PP disabled
2,disable pp_en if sriov
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Acked-by: Alex Deucher <alexander.deucher@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Monk Liu [Sun, 22 Jan 2017 10:52:56 +0000 (18:52 +0800)]
drm/amdgpu:fix typo
Signed-off-by: Monk Liu <Monk.Liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
Zhenyu Wang [Wed, 29 Mar 2017 03:07:53 +0000 (11:07 +0800)]
drm/i915/gvt: fix error return check for copy_gma_to_hva()
From commit
73dec95e6ba3 ("drm/i915: Emit to ringbuffer directly"),
copy_gma_to_hva() now returns copied data length instead of 0, so
need to change error return check for that.
Note: Looks this is caused by backmerge conflict resolving, so
4.11-rc4 is not impacted as commit
73dec95e6ba3 ("drm/i915: Emit to
ringbuffer directly") is not in 4.11. But need to fix this before I
can apply 4.12 stuff against drm-intel-next correctly.
Fixes: e5c1ff14757a ("Backmerge tag 'v4.11-rc4' into drm-next")
Cc: Dave Airlie <airlied@redhat.com>
Cc: Tina Zhang <tina.zhang@intel.com>
Signed-off-by: Zhenyu Wang <zhenyuw@linux.intel.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
Dave Airlie [Tue, 28 Mar 2017 07:34:19 +0000 (17:34 +1000)]
Backmerge tag 'v4.11-rc4' into drm-next
Linux 4.11-rc4
The i915 GVT team need the rc4 code to base some more code on.
Linus Torvalds [Sun, 26 Mar 2017 21:15:16 +0000 (14:15 -0700)]
Linux 4.11-rc4
Linus Torvalds [Sun, 26 Mar 2017 18:15:54 +0000 (11:15 -0700)]
Merge tag 'char-misc-4.11-rc4' of git://git./linux/kernel/git/gregkh/char-misc
Pull char/misc driver fixes from Greg KH:
"A smattering of different small fixes for some random driver
subsystems. Nothing all that major, just resolutions for reported
issues and bugs.
All have been in linux-next with no reported issues"
* tag 'char-misc-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (21 commits)
extcon: int3496: Set the id pin to direction-input if necessary
extcon: int3496: Use gpiod_get instead of gpiod_get_index
extcon: int3496: Add dependency on X86 as it's Intel specific
extcon: int3496: Add GPIO ACPI mapping table
extcon: int3496: Rename GPIO pins in accordance with binding
vmw_vmci: handle the return value from pci_alloc_irq_vectors correctly
ppdev: fix registering same device name
parport: fix attempt to write duplicate procfiles
auxdisplay: img-ascii-lcd: add missing sentinel entry in img_ascii_lcd_matches
Drivers: hv: vmbus: Don't leak memory when a channel is rescinded
Drivers: hv: vmbus: Don't leak channel ids
Drivers: hv: util: don't forget to init host_ts.lock
Drivers: hv: util: move waiting for release to hv_utils_transport itself
vmbus: remove hv_event_tasklet_disable/enable
vmbus: use rcu for per-cpu channel list
mei: don't wait for os version message reply
mei: fix deadlock on mei reset
intel_th: pci: Add Gemini Lake support
intel_th: pci: Add Denverton SOC support
intel_th: Don't leak module refcount on failure to activate
...
Linus Torvalds [Sun, 26 Mar 2017 18:05:42 +0000 (11:05 -0700)]
Merge tag 'driver-core-4.11-rc4' of git://git./linux/kernel/git/gregkh/driver-core
Pull driver core fix from Greg KH:
"Here is a single kernfs fix for 4.11-rc4 that resolves a reported
issue.
It has been in linux-next with no reported issues"
* tag 'driver-core-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core:
kernfs: Check KERNFS_HAS_RELEASE before calling kernfs_release_file()
Linus Torvalds [Sun, 26 Mar 2017 18:03:42 +0000 (11:03 -0700)]
Merge tag 'tty-4.11-rc4' of git://git./linux/kernel/git/gregkh/tty
Pull tty/serial driver fixes from Greg KH:
"Here are some tty and serial driver fixes for 4.11-rc4.
One of these fix a long-standing issue in the ldisc code that was
found by Dmitry Vyukov with his great fuzzing work. The other fixes
resolve other reported issues, and there is one revert of a patch in
4.11-rc1 that wasn't correct.
All of these have been in linux-next for a while with no reported
issues"
* tag 'tty-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty:
tty: fix data race in tty_ldisc_ref_wait()
tty: don't panic on OOM in tty_set_ldisc()
Revert "tty: serial: pl011: add ttyAMA for matching pl011 console"
tty: acpi/spcr: QDF2400 E44 checks for wrong OEM revision
serial: 8250_dw: Fix breakage when HAVE_CLK=n
serial: 8250_dw: Honor clk_round_rate errors in dw8250_set_termios
Linus Torvalds [Sun, 26 Mar 2017 18:02:00 +0000 (11:02 -0700)]
Merge tag 'staging-4.11-rc4' of git://git./linux/kernel/git/gregkh/staging
Pull IIO driver fixes from Greg KH:
"Here are some small IIO driver fixes for 4.11-rc4 that resolve a
number of tiny reported issues. All of these have been in linux-next
for a while with no reported issues"
* tag 'staging-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging:
iio: imu: st_lsm6dsx: fix FIFO_CTRL2 overwrite during watermark configuration
iio: adc: ti_am335x_adc: fix fifo overrun recovery
iio: sw-device: Fix config group initialization
iio: magnetometer: ak8974: remove incorrect __exit markups
iio: hid-sensor-trigger: Change get poll value function order to avoid sensor properties losing after resume from S3
Linus Torvalds [Sun, 26 Mar 2017 17:52:52 +0000 (10:52 -0700)]
Merge tag 'usb-4.11-rc4' of git://git./linux/kernel/git/gregkh/usb
Pull USB/PHY fixes from Greg KH:
"Here are a number of small USB and PHY driver fixes for 4.11-rc4.
Nothing major here, just an bunch of small fixes, and a handfull of
good fixes from Johan for devices with crazy descriptors. There are a
few new device ids in here as well.
All of these have been in linux-next with no reported issues"
* tag 'usb-4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (26 commits)
usb: gadget: f_hid: fix: Don't access hidg->req without spinlock held
usb: gadget: udc: remove pointer dereference after free
usb: gadget: f_uvc: Sanity check wMaxPacketSize for SuperSpeed
usb: gadget: f_uvc: Fix SuperSpeed companion descriptor's wBytesPerInterval
usb: gadget: acm: fix endianness in notifications
usb: dwc3: gadget: delay unmap of bounced requests
USB: serial: qcserial: add Dell DW5811e
usb: hub: Fix crash after failure to read BOS descriptor
ACM gadget: fix endianness in notifications
USB: usbtmc: fix probe error path
USB: usbtmc: add missing endpoint sanity check
USB: serial: option: add Quectel UC15, UC20, EC21, and EC25 modems
usb: musb: fix possible spinlock deadlock
usb: musb: dsps: fix iounmap in error and exit paths
usb: musb: cppi41: don't check early-TX-interrupt for Isoch transfer
usb-core: Add LINEAR_FRAME_INTR_BINTERVAL USB quirk
uwb: i1480-dfu: fix NULL-deref at probe
uwb: hwa-rc: fix NULL-deref at probe
USB: wusbcore: fix NULL-deref at probe
USB: uss720: fix NULL-deref at probe
...
Linus Torvalds [Sun, 26 Mar 2017 17:34:10 +0000 (10:34 -0700)]
Merge tag 'powerpc-4.11-6' of git://git./linux/kernel/git/powerpc/linux
Pull more powerpc fixes from Michael Ellerman:
"These are all pretty minor. The fix for idle wakeup would be a bad bug
but has not been observed in practice.
The update to the gcc-plugins docs was Cc'ed to Kees and Jon, Kees
OK'ed it going via powerpc and I didn't hear from Jon.
- cxl: Route eeh events to all slices for pci_channel_io_perm_failure state
- powerpc/64s: Fix idle wakeup potential to clobber registers
- Revert "powerpc/64: Disable use of radix under a hypervisor"
- gcc-plugins: update architecture list in documentation
Thanks to: Andrew Donnellan, Nicholas Piggin, Paul Mackerras, Vaibhav
Jain"
* tag 'powerpc-4.11-6' of git://git.kernel.org/pub/scm/linux/kernel/git/powerpc/linux:
gcc-plugins: update architecture list in documentation
Revert "powerpc/64: Disable use of radix under a hypervisor"
powerpc/64s: Fix idle wakeup potential to clobber registers
cxl: Route eeh events to all slices for pci_channel_io_perm_failure state
Linus Torvalds [Sun, 26 Mar 2017 17:29:21 +0000 (10:29 -0700)]
Merge tag 'ext4_for_linus_stable' of git://git./linux/kernel/git/tytso/ext4
Pull ext4 fixes from Ted Ts'o:
"Fix a memory leak on an error path, and two races when modifying
inodes relating to the inline_data and metadata checksum features"
* tag 'ext4_for_linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4:
ext4: fix two spelling nits
ext4: lock the xattr block before checksuming it
jbd2: don't leak memory if setting up journal fails
ext4: mark inode dirty after converting inline directory
Linus Torvalds [Sat, 25 Mar 2017 22:36:56 +0000 (15:36 -0700)]
Merge tag 'fscrypt-for-linus_stable' of git://git./linux/kernel/git/tytso/fscrypt
Pull fscrypto fixes from Ted Ts'o:
"A code cleanup and bugfix for fs/crypto"
* tag 'fscrypt-for-linus_stable' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/fscrypt:
fscrypt: eliminate ->prepare_context() operation
fscrypt: remove broken support for detecting keyring key revocation
Linus Torvalds [Sat, 25 Mar 2017 22:31:50 +0000 (15:31 -0700)]
Merge tag 'hwmon-for-linus-v4.11-rc4' of git://git./linux/kernel/git/groeck/linux-staging
Pull hwmon fixes from Guenter Roeck:
- bug fixes in asus_atk0110, it87 and max31790 drivers
- added missing API definition to hwmon core
* tag 'hwmon-for-linus-v4.11-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/groeck/linux-staging:
hwmon: (asus_atk0110) fix uninitialized data access
hwmon: Add missing HWMON_T_ALARM
hwmon: (it87) Avoid registering the same chip on both SIO addresses
hwmon: (max31790) Set correct PWM value
Linus Torvalds [Sat, 25 Mar 2017 22:25:58 +0000 (15:25 -0700)]
Merge tag 'for-linus' of git://git./linux/kernel/git/dledford/rdma
Pull rdma fixes from Doug Ledford:
"This has been a slow -rc cycle for the RDMA subsystem. We really
haven't had a lot of rc fixes come in. This pull request is the first
of this entire rc cycle and it has all of the suitable fixes so far
and it's still only about 20 patches. The fix for the minor breakage
cause by the dma mapping patchset is in here, as well as a couple
other potential oops fixes, but the rest is more minor.
Summary:
- fix for dma_ops change in this kernel, resolving the s390, powerpc,
and IOMMU operation
- a few other oops fixes
- the rest are all minor fixes"
* tag 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/dledford/rdma:
IB/qib: fix false-postive maybe-uninitialized warning
RDMA/iser: Fix possible mr leak on device removal event
IB/device: Convert ib-comp-wq to be CPU-bound
IB/cq: Don't process more than the given budget
IB/rxe: increment msn only when completing a request
uapi: fix rdma/mlx5-abi.h userspace compilation errors
IB/core: Restore I/O MMU, s390 and powerpc support
IB/rxe: Update documentation link
RDMA/ocrdma: fix a type issue in ocrdma_put_pd_num()
IB/rxe: double free on error
RDMA/vmw_pvrdma: Activate device on ethernet link up
RDMA/vmw_pvrdma: Dont hardcode QP header page
RDMA/vmw_pvrdma: Cleanup unused variables
infiniband: Fix alignment of mmap cookies to support VIPT caching
IB/core: Protect against self-requeue of a cq work item
i40iw: Receive netdev events post INET_NOTIFIER state