openwrt/staging/blogic.git
9 years agodrm/msm/mdp: Add support for more 32-bit RGB formats
Stephane Viau [Wed, 3 Jun 2015 21:27:21 +0000 (17:27 -0400)]
drm/msm/mdp: Add support for more 32-bit RGB formats

That will complete the lists of Alpha + RGB formats.

Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: use __s32, __s64, __u32 and __u64 from linux/types.h for uabi
Mikko Rapeli [Sat, 30 May 2015 15:38:08 +0000 (17:38 +0200)]
drm/msm: use __s32, __s64, __u32 and __u64 from linux/types.h for uabi

Fixes userspace compilation errors like:

error: unknown type name ‘uint32_t’

Signed-off-by: Mikko Rapeli <mikko.rapeli@iki.fi>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm/atomic: Clean up planes in the error paths of .atomic_commit()
Laurent Pinchart [Wed, 27 May 2015 11:39:46 +0000 (14:39 +0300)]
drm/msm/atomic: Clean up planes in the error paths of .atomic_commit()

When the .atomic_commit() handler fails, clean up planes previoulsy
prepared by drm_atomic_helper_prepare_planes() with a call to
drm_atomic_helper_cleanup_planes().

Signed-off-by: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm/mdp5: Always generate active-high sync signals for DSI
Hai Li [Fri, 22 May 2015 14:16:46 +0000 (10:16 -0400)]
drm/msm/mdp5: Always generate active-high sync signals for DSI

DSI video mode engine can only take active-high sync signals. This
change prevents MDP5 sending active-low sync signals to DSI in any
case.

Signed-off-by: Hai Li <hali@codeaurora.org>
Tested-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: dsi: fix compile errors when CONFIG_GPIOLIB=n
Brian Norris [Wed, 20 May 2015 22:59:31 +0000 (15:59 -0700)]
drm/msm: dsi: fix compile errors when CONFIG_GPIOLIB=n

I'm not sure where, exactly, but somewhere in here we must be relying on
an implicit include.

drivers/gpu/drm/msm/dsi/dsi_host.c: In function ‘dsi_host_init_panel_gpios’:
drivers/gpu/drm/msm/dsi/dsi_host.c:1356:2: error: implicit declaration of function ‘devm_gpiod_get’ [-Werror=implicit-function-declaration]
  msm_host->disp_en_gpio = devm_gpiod_get(panel_device,
  ^
drivers/gpu/drm/msm/dsi/dsi_host.c:1356:25: warning: assignment makes pointer from integer without a cast [enabled by default]
  msm_host->disp_en_gpio = devm_gpiod_get(panel_device,
                         ^
drivers/gpu/drm/msm/dsi/dsi_host.c:1364:3: error: implicit declaration of function ‘gpiod_direction_output’ [-Werror=implicit-function-declaration]
   ret = gpiod_direction_output(msm_host->disp_en_gpio, 0);
   ^
drivers/gpu/drm/msm/dsi/dsi_host.c:1371:20: warning: assignment makes pointer from integer without a cast [enabled by default]
  msm_host->te_gpio = devm_gpiod_get(panel_device, "disp-te");
                    ^
drivers/gpu/drm/msm/dsi/dsi_host.c:1378:3: error: implicit declaration of function ‘gpiod_direction_input’ [-Werror=implicit-function-declaration]
   ret = gpiod_direction_input(msm_host->te_gpio);
   ^
drivers/gpu/drm/msm/dsi/dsi_host.c: In function ‘msm_dsi_host_power_on’:
drivers/gpu/drm/msm/dsi/dsi_host.c:1918:3: error: implicit declaration of function ‘gpiod_set_value’ [-Werror=implicit-function-declaration]
   gpiod_set_value(msm_host->disp_en_gpio, 1);
   ^

Signed-off-by: Brian Norris <computersforpeace@gmail.com>
Cc: David Airlie <airlied@linux.ie>
Cc: Rob Clark <robdclark@gmail.com>
Cc: Hai Li <hali@codeaurora.org>
Cc: dri-devel@lists.freedesktop.org
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: use devm_gpiod_get_optional for optional reset gpio
Uwe Kleine-König [Wed, 20 May 2015 07:21:41 +0000 (09:21 +0200)]
drm/msm: use devm_gpiod_get_optional for optional reset gpio

Since 39b2bbe3d715 (gpio: add flags argument to gpiod_get*() functions)
which appeared in v3.17-rc1, the gpiod_get* functions take an additional
parameter that allows to specify direction and initial value for output.

Also there is a variant to find optional gpios that returns NULL if
there is no gpio instead of -ENOENT.

Make use of both features to simplify the driver.

This makes error checking more strict because errors like -ENOSYS ("no
gpio support compiled in") or -EPROBE_DEFER ("gpio not ready yet") are
handled correctly now.

Furthermore this is one caller less that stops us making the flags
argument to gpiod_get*() mandatory.

Reviewed-by: Linus Walleij <linus.walleij@linaro.org>
Signed-off-by: Uwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm/dsi: Separate PHY to another platform device
Hai Li [Fri, 15 May 2015 17:04:06 +0000 (13:04 -0400)]
drm/msm/dsi: Separate PHY to another platform device

There are different types of PHY from one chipset to another, while
the DSI host controller is relatively consistent across platforms.
Also, the PLL inside PHY is providing the source of DSI byte and
pixel clocks, which are used by DSI host controller. Separated devices
for clock provider and clock consumer make DSI driver better fit into
common clock framework.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm/dsi: Enable PLL driver in MSM DSI
Hai Li [Fri, 15 May 2015 17:04:05 +0000 (13:04 -0400)]
drm/msm/dsi: Enable PLL driver in MSM DSI

This change activates PLL driver for DSI to work with
common clock framework.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm/dsi: Add DSI PLL clock driver support
Hai Li [Fri, 15 May 2015 17:04:04 +0000 (13:04 -0400)]
drm/msm/dsi: Add DSI PLL clock driver support

DSI byte clock and pixel clocks are sourced from DSI PLL.
This change adds the DSI PLL source clock driver under
common clock framework.

This change handles DSI 28nm PLL only.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Stephane Viau <sviau@codeaurora.org>
Signed-off-by: Wentao Xu <wentaox@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: use IS_ERR() to check regulator_get() return
Fabian Frederick [Mon, 4 May 2015 17:03:55 +0000 (19:03 +0200)]
drm/msm: use IS_ERR() to check regulator_get() return

regulator_get() never returns NULL. There's no need for IS_ERR_OR_NULL()

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: use IS_ERR() to check msm_ioremap() return
Fabian Frederick [Mon, 4 May 2015 17:03:54 +0000 (19:03 +0200)]
drm/msm: use IS_ERR() to check msm_ioremap() return

msm_ioremap() never returns NULL. There's no need for IS_ERR_OR_NULL()

Signed-off-by: Fabian Frederick <fabf@skynet.be>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm/mdp5: Wait for PP_DONE irq for command mode CRTC atomic commit
Hai Li [Tue, 28 Apr 2015 23:35:38 +0000 (19:35 -0400)]
drm/msm/mdp5: Wait for PP_DONE irq for command mode CRTC atomic commit

CRTCs in DSI command mode data path should wait for pingpong done,
instead of vblank, to finish atomic commit.

This change is to enable PP_DONE irq on command mode CRTCs and wait for
this irq happens before atomic commit completion.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: Use customized function to wait for atomic commit done
Hai Li [Tue, 28 Apr 2015 23:35:37 +0000 (19:35 -0400)]
drm/msm: Use customized function to wait for atomic commit done

MDP FLUSH registers could indicate if the previous flush updates
has taken effect at vsync boundary. Making use of this H/W feature
can catch the vsync that happened between CRTC atomic_flush and
*_wait_for_vblanks, to avoid unnecessary wait.

This change allows kms CRTCs to use their own *_wait_for_commit_done
functions to wait for FLUSH register cleared at vsync, before commit
completion.

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodt-bindings: Add MSM eDP controller documentation
Hai Li [Wed, 15 Apr 2015 20:24:38 +0000 (16:24 -0400)]
dt-bindings: Add MSM eDP controller documentation

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodt-bindings: Add MSM DSI controller documentation
Hai Li [Wed, 15 Apr 2015 20:24:37 +0000 (16:24 -0400)]
dt-bindings: Add MSM DSI controller documentation

Signed-off-by: Hai Li <hali@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: drop redundant debug output
Nicholas Mc Guire [Sat, 11 Apr 2015 13:10:38 +0000 (15:10 +0200)]
drm/msm: drop redundant debug output

wait_for_completion_timeout returns 0 in case of timeout and never
return < 0 so there is no additional information in printing the
value of time_left here as it will always be 0, thus it can be dropped.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: wait_for_completion_timeout return is never negative
Nicholas Mc Guire [Sat, 11 Apr 2015 13:10:37 +0000 (15:10 +0200)]
drm/msm: wait_for_completion_timeout return is never negative

wait_for_completion_timeout returns >= 0 but never
negative  - so the error check should be against equality
to 0 not <= 0.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: match wait_for_completion_timeout return type
Nicholas Mc Guire [Sat, 11 Apr 2015 13:10:36 +0000 (15:10 +0200)]
drm/msm: match wait_for_completion_timeout return type

return type of wait_for_completion_timeout is unsigned long not int, this
patch assigns the return value of wait_for_completion_timeout to an
appropriately typed and named variable.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: dsi: Provide option to force continuous HS clock
Archit Taneja [Wed, 8 Apr 2015 06:07:40 +0000 (11:37 +0530)]
drm/msm: dsi: Provide option to force continuous HS clock

Some DSI peripherals rely on the HS clock on DSI clock lane as their clock
source. If the clock lane transitions between HS and LP states, it
can disrupt the functioning of such peripherals.

The mipi dsi mode flag MIPI_DSI_CLOCK_NON_CONTINUOUS already exists for
such peripheral drivers. Use it to configure the bit CLKLN_HS_FORCE_REQUEST
in DSI_LANE_CTRL.

Signed-off-by: Archit Taneja <architt@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: Call drm_prime_gem_destroy to clean up imported GEM object
jilai wang [Tue, 7 Apr 2015 17:51:32 +0000 (13:51 -0400)]
drm/msm: Call drm_prime_gem_destroy to clean up imported GEM object

If the GEM object is imported, drm_prime_gem_destroy needs to be
called to clean up dma buffer related information.

Signed-off-by: Jilai Wang <jilaiw@codeaurora.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm/edp: fix build warning - missing prototype
Rob Clark [Fri, 5 Jun 2015 16:10:23 +0000 (12:10 -0400)]
drm/msm/edp: fix build warning - missing prototype

Fix build warning when building edp/edp_aux.o due to missing
prototype for edp_aux_transfer.

This function is only used in edp_aux.c so just make it static.

Reported-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: drop redundant output in debug message
Nicholas Mc Guire [Sat, 4 Apr 2015 02:39:09 +0000 (04:39 +0200)]
drm/msm: drop redundant output in debug message

wait_for_completion_timeout returns 0 in case of timeout so printing the
return value here will always yield 0 and is therefor redundant - dropped.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: fix HZ dependency of timeout
Nicholas Mc Guire [Sat, 4 Apr 2015 02:39:08 +0000 (04:39 +0200)]
drm/msm: fix HZ dependency of timeout

The timeout is passed as a constant which makes it HZ dependent because
jiffies are expected so it should be converted to jiffies. The actual
value is not clear from the code - my best guess is that this should be
300 milliseconds given that other timeouts are in milliseconds based on
looking at other drm drivers (e.g. exynos_drm_dsi.c:356 300ms,
tegra/dpaux.c:188 250ms) - this needs to be confirmed by someone who
knows the details of the driver.

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: fixup wait_for_completion_timeout handling
Nicholas Mc Guire [Sat, 4 Apr 2015 02:39:07 +0000 (04:39 +0200)]
drm/msm: fixup wait_for_completion_timeout handling

wait_for_completion_timeout return >= 0 but never negative so the check
logic looks inconsistent. Further the return value of
wait_for_completion_timeout was being passed up the call chain but the
x call sites as drm_dp_i2c_do_msg()/drm_dp_dpcd_access() check for < 0
thus timeout was being treated as success case.

<snip> drivers/gpu/drm/drm_dp_helper.c:drm_dp_i2c_do_msg()
                mutex_lock(&aux->hw_mutex);
                ret = aux->transfer(aux, msg);
                mutex_unlock(&aux->hw_mutex);
                if (ret < 0) {
<snip>
logic in edp_aux_transfer() seems incorrect as it could return 0 (timeout)
but checks of <= 0 to indicate error so the return probably should be
-ETIMEDOUT in case wait_for_completion_timeout returns 0 (timeout
occurred).

Signed-off-by: Nicholas Mc Guire <hofrat@osadl.org>
Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm/mdp5: fix for crash in disable path
Rob Clark [Fri, 15 May 2015 00:21:37 +0000 (20:21 -0400)]
drm/msm/mdp5: fix for crash in disable path

Seems like disable can race with complete_flip() in process of disabling
a crtc, leading to:

[   49.065364] Call trace:
[   49.071441] [<ffffffc00041d5a0>] mdp5_ctl_blend+0x20/0x1c0
[   49.073788] [<ffffffc00041ebcc>] mdp5_crtc_disable+0x3c/0xa8
[   49.079348] [<ffffffc0003e7854>] disable_outputs.isra.4+0x11c/0x220
[   49.085164] [<ffffffc0003e7afc>] drm_atomic_helper_commit_modeset_disables+0x14/0x38
[   49.091155] [<ffffffc000425c80>] complete_commit+0x40/0xb8
[   49.099136] [<ffffffc0004260ac>] msm_atomic_commit+0x364/0x398
[   49.104430] [<ffffffc00040a614>] drm_atomic_commit+0x3c/0x70
[   49.110249] [<ffffffc0003e67b8>] drm_atomic_helper_set_config+0x1b0/0x3e0
[   49.116065] [<ffffffc0003f99bc>] drm_mode_set_config_internal+0x64/0xf8
[   49.122746] [<ffffffc0003fa624>] drm_framebuffer_remove+0xe4/0x128
[   49.129171] [<ffffffc0003feaf8>] drm_mode_rmfb+0xc0/0x100
[   49.135420] [<ffffffc0003efba8>] drm_ioctl+0x258/0x4d0
[   49.140889] [<ffffffc0001b0388>] do_vfs_ioctl+0x338/0x5d0
[   49.145921] [<ffffffc0001b06a8>] SyS_ioctl+0x88/0xa0

It makes no sense to free the ctl without disabling all stages, so lets
just move them together to avoid the crash.

Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: workaround for missing irq on a306/8x16
Rob Clark [Tue, 12 May 2015 15:29:40 +0000 (11:29 -0400)]
drm/msm: workaround for missing irq on a306/8x16

Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: adreno a306 support
Rob Clark [Wed, 6 May 2015 17:14:30 +0000 (13:14 -0400)]
drm/msm: adreno a306 support

As found in apq8016 (used in DragonBoard 410c) and msm8916.

Note that numerically a306 is actually 307 (since a305c already claimed
306).  Nice and confusing.

Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: clarify downstream bus scaling
Rob Clark [Thu, 4 Jun 2015 14:26:37 +0000 (10:26 -0400)]
drm/msm: clarify downstream bus scaling

A few spots in the driver have support for downstream android
CONFIG_MSM_BUS_SCALING.  This is mainly to simplify backporting the
driver for various devices which do not have sufficient upstream
kernel support.  But the intentionally dead code seems to cause
some confusion.  Rename the #define to make this more clear.

Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm/mdp4: Support NV12MT format in mdp4
Rob Clark [Fri, 30 Jan 2015 14:48:11 +0000 (20:18 +0530)]
drm/msm/mdp4: Support NV12MT format in mdp4

Using fb modifier flag, support NV12MT format in MDP4.

v2:
- rework the modifier's description [Daniel Vetter's comment]
- drop .set_mode_config() callback [Rob Clark's comment]
v3:
- change VENDOR's name and restrict usage to NV12 [pointed by Daniel]

Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: update generated headers
Rob Clark [Wed, 20 May 2015 14:50:30 +0000 (10:50 -0400)]
drm/msm: update generated headers

Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm: add missing DRIVER_ATOMIC flag
Rob Clark [Thu, 4 Jun 2015 14:12:22 +0000 (10:12 -0400)]
drm/msm: add missing DRIVER_ATOMIC flag

Somehow this got lost when msm atomic support was first merged.

Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/msm/adreno: dump scratch regs and other info on hang
Rob Clark [Sun, 19 Apr 2015 14:14:09 +0000 (10:14 -0400)]
drm/msm/adreno: dump scratch regs and other info on hang

Dump a bit more info when the GPU hangs, without having hang_debug
enabled (which dumps a *lot* of registers).  Also dump the scratch
registers, as they are useful for determining where in the cmdstream
the GPU hung (and they seem always safe to read when GPU has hung).

Note that the freedreno gallium driver emits increasing counter values
to SCRATCH6 (to identify tile #) and SCRATCH7 (to identify draw #), so
these two in particular can be used to "triangulate" where in the
cmdstream the GPU hung.

Signed-off-by: Rob Clark <robdclark@gmail.com>
9 years agodrm/virtio: remove some dead code
Dan Carpenter [Wed, 10 Jun 2015 19:27:51 +0000 (22:27 +0300)]
drm/virtio: remove some dead code

The goto is correct, and we never reach the return statement so just
delete the dead code.

Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/virtio: checking for NULL instead of IS_ERR
Dan Carpenter [Wed, 10 Jun 2015 19:27:11 +0000 (22:27 +0300)]
drm/virtio: checking for NULL instead of IS_ERR

virtio_gpu_alloc_object() returns an error pointer, it never returns
NULL.

Fixes: dc5698e80cf7 ('Add virtio gpu driver.')
Signed-off-by: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agoMerge branch 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux into...
Dave Airlie [Thu, 11 Jun 2015 03:04:07 +0000 (13:04 +1000)]
Merge branch 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux into drm-next

More fixes for amdgpu for 4.2.  We've integrated Jerome's comments
about the interface among other things.  I'll be on vacation next week
so Christian will be handling any updates next week.

* 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux: (23 commits)
  drm/amdgpu: fix a amdgpu_dpm=0 bug
  drm/amdgpu: don't enable/disable display twice on suspend/resume
  drm/amdgpu: fix UVD/VCE VM emulation
  drm/amdgpu: enable vce powergating
  drm/amdgpu/iceland: don't call smu_init on resume
  drm/amdgpu/tonga: don't call smu_init on resume
  drm/amdgpu/cz: don't call smu_init on resume
  drm/amdgpu: update to latest gfx8 golden register settings
  drm/amdgpu: whitespace cleanup in gmc8 golden regs
  drm/admgpu: move XDMA golden registers to dce code
  drm/amdgpu: fix the build on big endian
  drm/amdgpu: cleanup UAPI comments
  drm/amdgpu: remove AMDGPU_CTX_OP_STATE_RUNNING
  drm/amdgpu: remove the VI hardware semaphore in ring sync
  drm/amdgpu: set the gfx config properly for all CZ variants (v2)
  drm/amdgpu: also print the pci revision when printing the pci ids
  drm/amdgpu: cleanup VA IOCTL
  drm/amdgpu: fix saddr handling in amdgpu_vm_bo_unmap
  drm/amdgpu: fix amdgpu_vm_bo_map
  drm/amdgpu: remove unused AMDGPU_IB_FLAG_GDS
  ...

9 years agodrm/amdgpu: fix a amdgpu_dpm=0 bug
Sonny Jiang [Wed, 10 Jun 2015 17:46:36 +0000 (13:46 -0400)]
drm/amdgpu: fix a amdgpu_dpm=0 bug

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: don't enable/disable display twice on suspend/resume
Alex Deucher [Wed, 10 Jun 2015 15:52:00 +0000 (11:52 -0400)]
drm/amdgpu: don't enable/disable display twice on suspend/resume

We were doing it in the common code and in the IP specific code.
Remove the IP specific code.  The common code handles the
ordering properly.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: fix UVD/VCE VM emulation
Christian König [Wed, 10 Jun 2015 15:20:11 +0000 (17:20 +0200)]
drm/amdgpu: fix UVD/VCE VM emulation

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: enable vce powergating
Sonny Jiang [Thu, 28 May 2015 19:47:53 +0000 (15:47 -0400)]
drm/amdgpu: enable vce powergating

Enable VCE dpm and powergating. VCE dpm dynamically scales the VCE clocks on
demand.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
9 years agodrm/amdgpu/iceland: don't call smu_init on resume
Alex Deucher [Tue, 9 Jun 2015 21:46:30 +0000 (17:46 -0400)]
drm/amdgpu/iceland: don't call smu_init on resume

smu_init allocates buffers and initializes them.  It does not
touch the hw.  There is no need to do it again on resume.  It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.

Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu/tonga: don't call smu_init on resume
Alex Deucher [Tue, 9 Jun 2015 21:42:10 +0000 (17:42 -0400)]
drm/amdgpu/tonga: don't call smu_init on resume

smu_init allocates buffers and initializes them.  It does not
touch the hw.  There is no need to do it again on resume.  It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.

Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu/cz: don't call smu_init on resume
Alex Deucher [Tue, 9 Jun 2015 21:32:53 +0000 (17:32 -0400)]
drm/amdgpu/cz: don't call smu_init on resume

smu_init allocates buffers and initializes them.  It does not
touch the hw.  There is no need to do it again on resume.  It
should really be part of sw_init (and smu_fini should be part
of sw_fini), but we need the firmware sizes from the other IPs
for firmware loading so we have to wait until sw init is done
for all other IPs.

Reviewed-by: Sonny Jiang <Sonny.Jiang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: update to latest gfx8 golden register settings
Alex Deucher [Tue, 9 Jun 2015 18:33:03 +0000 (14:33 -0400)]
drm/amdgpu: update to latest gfx8 golden register settings

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: whitespace cleanup in gmc8 golden regs
Alex Deucher [Tue, 9 Jun 2015 18:06:18 +0000 (14:06 -0400)]
drm/amdgpu: whitespace cleanup in gmc8 golden regs

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/admgpu: move XDMA golden registers to dce code
Alex Deucher [Tue, 9 Jun 2015 17:51:25 +0000 (13:51 -0400)]
drm/admgpu: move XDMA golden registers to dce code

Already moved other display registers.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: fix the build on big endian
Alex Deucher [Tue, 9 Jun 2015 13:58:23 +0000 (09:58 -0400)]
drm/amdgpu: fix the build on big endian

Some leftover copy and pastes from radeon that never
got updated.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reported-by: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: cleanup UAPI comments
Christian König [Tue, 9 Jun 2015 13:54:37 +0000 (15:54 +0200)]
drm/amdgpu: cleanup UAPI comments

No functional change.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: remove AMDGPU_CTX_OP_STATE_RUNNING
Christian König [Tue, 9 Jun 2015 13:21:35 +0000 (15:21 +0200)]
drm/amdgpu: remove AMDGPU_CTX_OP_STATE_RUNNING

Not used.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: remove the VI hardware semaphore in ring sync
David Zhang [Wed, 10 Jun 2015 18:28:56 +0000 (02:28 +0800)]
drm/amdgpu: remove the VI hardware semaphore in ring sync

Signed-off-by: David Zhang <david1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
9 years agodrm/amdgpu: set the gfx config properly for all CZ variants (v2)
Alex Deucher [Fri, 5 Jun 2015 18:34:19 +0000 (14:34 -0400)]
drm/amdgpu: set the gfx config properly for all CZ variants (v2)

Need to adjust the number of CUs and RBs.

v2: get proper values

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: also print the pci revision when printing the pci ids
Alex Deucher [Fri, 5 Jun 2015 19:04:33 +0000 (15:04 -0400)]
drm/amdgpu: also print the pci revision when printing the pci ids

The driver makes use of this information so print if to aid in
debugging.

Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Samuel Li <samuel.li@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: cleanup VA IOCTL
Christian König [Mon, 8 Jun 2015 13:03:00 +0000 (15:03 +0200)]
drm/amdgpu: cleanup VA IOCTL

Remove the unnecessary returned status and make the IOCTL write only.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: fix saddr handling in amdgpu_vm_bo_unmap
Christian König [Fri, 5 Jun 2015 18:56:17 +0000 (20:56 +0200)]
drm/amdgpu: fix saddr handling in amdgpu_vm_bo_unmap

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: fix amdgpu_vm_bo_map
Christian König [Fri, 5 Jun 2015 08:06:04 +0000 (10:06 +0200)]
drm/amdgpu: fix amdgpu_vm_bo_map

We need to reset the bo_va address, otherwise new mappings
wouldn't be updated in the page table.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: remove unused AMDGPU_IB_FLAG_GDS
Jammy Zhou [Fri, 5 Jun 2015 20:49:22 +0000 (04:49 +0800)]
drm/amdgpu: remove unused AMDGPU_IB_FLAG_GDS

Signed-off-by: Jammy Zhou <Jammy.Zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: disable user fence interrupt (v2)
Chunming Zhou [Mon, 1 Jun 2015 06:35:03 +0000 (14:35 +0800)]
drm/amdgpu: disable user fence interrupt (v2)

amdgpu submits both kernel and user fences, but just need one interrupt,
disable user fence interrupt and don't effect user fence.

v2: fix merge error

Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: fix user ptr race condition
Christian König [Wed, 3 Jun 2015 19:31:20 +0000 (21:31 +0200)]
drm/amdgpu: fix user ptr race condition

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: monk liu <monk.liu@amd.com>
9 years agodrm/amdgpu: add zero timeout check in amdgpu_fence_wait_seq_timeout
Jack Xiao [Thu, 4 Jun 2015 04:18:27 +0000 (12:18 +0800)]
drm/amdgpu: add zero timeout check in amdgpu_fence_wait_seq_timeout

Signed-off-by: Jack Xiao <Jack.Xiao@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
9 years agovirtgpu: include linux/types.h to avoid warning.
Dave Airlie [Fri, 5 Jun 2015 02:31:12 +0000 (12:31 +1000)]
virtgpu: include linux/types.h to avoid warning.

Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agoMerge branch 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux into...
Dave Airlie [Fri, 5 Jun 2015 01:14:18 +0000 (11:14 +1000)]
Merge branch 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux into drm-next

This is the big pull request for amdgpu, the new driver for VI+ AMD
asics.  I currently supports Tonga, Iceland, and Carrizo and also
contains a Kconfig option to build support for CI parts for testing.

All major functionality is supported (displays, gfx, compute, dma,
video decode/encode, etc.).  Power management is working on Carrizo,
but is still being worked on for Tonga and Iceland.

* 'drm-next-4.2-amdgpu' of git://people.freedesktop.org/~agd5f/linux: (106 commits)
  drm/amdgpu: only support IBs in the buffer list (v2)
  drm/amdgpu: add vram_type and vram_bit_width for interface query (v2)
  drm/amdgpu: add ib_size/start_alignment interface query
  drm/amdgpu: add me/ce/pfp_feature_version interface query
  drm/amdgpu add ce_ram_size for interface query
  drm/amdgpu add max_memory_clock for interface query (v2)
  drm/amdgpu: add hdp flush for gfx8 compute ring
  drm/amdgpu: fix no hdp flush for compute ring
  drm/amdgpu: add HEVC/H.265 UVD support
  drm/amdgpu: stop loading firmware with pm.mutex locked
  drm/amdgpu: remove mclk_lock
  drm/amdgpu: fix description of vm_size module parameter (v2)
  drm/amdgpu: remove all sh mem register modification in vm flush
  drm/amdgpu: rename GEM_OP_SET_INITIAL_DOMAIN -> GEM_OP_SET_PLACEMENT
  drm/amdgpu: fence should be added to shared slot
  drm/amdgpu: sync fence of clear_invalids (v2)
  drm/amdgpu: max_pde_used usage should be under protect
  drm/amdgpu: fix bug of vm_bo_map (v2)
  drm/amdgpu: implement the allocation range (v3)
  drm/amdgpu: rename amdgpu_ip_funcs to amd_ip_funcs (v2)
  ...

9 years agodrm/qxl: Propagate correctly errors from qxlhw_handle_to_bo
Frediano Ziglio [Wed, 3 Jun 2015 11:09:19 +0000 (12:09 +0100)]
drm/qxl: Propagate correctly errors from qxlhw_handle_to_bo

This function could return a NULL pointer in case of handle not
present and in case of out of memory conditions however caller
function always returned EINVAL error hiding a possible ENOMEM.
This patch change the function to return the error instead to
be able to propagate the error instead of assuming EINVAL.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Simplify cleaning qxl processing command
Frediano Ziglio [Wed, 3 Jun 2015 11:09:18 +0000 (12:09 +0100)]
drm/qxl: Simplify cleaning qxl processing command

In qxlhw_handle_to_bo we incremented counters twice, one time for release object
and one for reloc_info.
In the main function however reloc_info references was drop much earlier than
release so keeping the pointer only on release is safe and make cleaning
process easier.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Move main reference counter to GEM object instead of TTM ones
Frediano Ziglio [Wed, 3 Jun 2015 11:09:17 +0000 (12:09 +0100)]
drm/qxl: Move main reference counter to GEM object instead of TTM ones

qxl_bo structure has two reference counters, one in the GEM object and
another in the TTM object. The GEM object keep a counter to the TTM object
so when GEM counter reached zero the TTM counter (using qxl_bo_unref) was
decremented. The qxl object is fully freed (both GEM and TTM part are cleaned)
when the TTM counter reach zero.
One issue was that surface idr structure has no owning on qxl_bo objects however
it contains a pointer to qxl_bo object. This caused some nasty race condition
for instance qxl_bo object was reaped even after counter was already zero.
This patch fix these races moving main counter (the one used by qxl_bo_(un)ref)
to GEM object which cleanup routine (qxl_gem_object_free) remove the idr pointer
(using qxl_surface_evict) when the counters are still valid.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Remove format string errors
Frediano Ziglio [Wed, 3 Jun 2015 11:09:16 +0000 (12:09 +0100)]
drm/qxl: Remove format string errors

Enable format string checks for qxl_io_log and remove resulting warnings
which could lead to memory errors on different platform or just printing
wrong information.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Handle correctly failures in qxl_alloc_relase_reserved
Frediano Ziglio [Wed, 3 Jun 2015 11:09:15 +0000 (12:09 +0100)]
drm/qxl: Handle correctly failures in qxl_alloc_relase_reserved

Free resources correctly if function fails

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Fix return for qxl_release_alloc
Frediano Ziglio [Wed, 3 Jun 2015 11:09:14 +0000 (12:09 +0100)]
drm/qxl: Fix return for qxl_release_alloc

This function return handle to allocated release object which is an int.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Handle all errors in qxl_surface_evict
Frediano Ziglio [Wed, 3 Jun 2015 11:09:13 +0000 (12:09 +0100)]
drm/qxl: Handle all errors in qxl_surface_evict

Only EBUSY error was handled. This could cause code to believe
reserve was successful while it failed.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Avoid double free on error
Frediano Ziglio [Wed, 3 Jun 2015 11:09:12 +0000 (12:09 +0100)]
drm/qxl: Avoid double free on error

Is we are not able to get source bo object from handle we free
destination bo object and call cleanup code however destination
object was already inserted in reloc_info array (num_relocs was
already incremented) so on cleanup we free destination again.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Fix print statement not using uninitialized variable
Frediano Ziglio [Wed, 3 Jun 2015 11:09:11 +0000 (12:09 +0100)]
drm/qxl: Fix print statement not using uninitialized variable

reloc_info[i] is not still initialized in the print statement.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Do not leak memory if qxl_release_list_add fails
Frediano Ziglio [Wed, 3 Jun 2015 11:09:10 +0000 (12:09 +0100)]
drm/qxl: Do not leak memory if qxl_release_list_add fails

If the function fails reference counter to the object is not decremented
causing leaks.
This is hard to spot as it happens only on very low memory situations.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/qxl: Do not cause spice-server to clean our objects
Frediano Ziglio [Wed, 3 Jun 2015 11:09:09 +0000 (12:09 +0100)]
drm/qxl: Do not cause spice-server to clean our objects

If objects are moved back from system memory to VRAM (and spice id
created again) memory is already initialized so we need to set flag
to not clear memory.
If you don't do it after a while using desktop many images turns to
black or transparents.

Signed-off-by: Frediano Ziglio <fziglio@redhat.com>
Cc: stable@vger.kernel.org
Reviewed-by: Dave Airlie <airlied@redhat.com>
Signed-off-by: Dave Airlie <airlied@redhat.com>
9 years agodrm/amdgpu: only support IBs in the buffer list (v2)
Marek Olšák [Tue, 2 Jun 2015 15:44:49 +0000 (17:44 +0200)]
drm/amdgpu: only support IBs in the buffer list (v2)

amdgpu_cs_find_mapping doesn't work without all buffers being validated,
so the TTM validation must be done first.

v2: only use amdgpu_cs_find_mapping for UVD/VCE VM emulation

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
9 years agodrm/amdgpu: add vram_type and vram_bit_width for interface query (v2)
Ken Wang [Wed, 3 Jun 2015 13:02:01 +0000 (21:02 +0800)]
drm/amdgpu: add vram_type and vram_bit_width for interface query (v2)

Track the type of vram on the board and provide a query for it.
User mode drivers and tools want this information for determining
bandwidth information and form informational purposes.

v2: fix build when CI support is not enabled

Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
9 years agodrm/amdgpu: add ib_size/start_alignment interface query
Ken Wang [Thu, 4 Jun 2015 13:26:57 +0000 (21:26 +0800)]
drm/amdgpu: add ib_size/start_alignment interface query

Query the IB alignment requirements from the kernel rather
than hardcoding them in the user mode drivers.

Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
9 years agodrm/amdgpu: add me/ce/pfp_feature_version interface query
Ken Wang [Wed, 3 Jun 2015 11:52:06 +0000 (19:52 +0800)]
drm/amdgpu: add me/ce/pfp_feature_version interface query

Provide this information to usermode drivers.  We were previously
missing this info.

Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
9 years agodrm/amdgpu add ce_ram_size for interface query
Ken Wang [Wed, 3 Jun 2015 09:47:54 +0000 (17:47 +0800)]
drm/amdgpu add ce_ram_size for interface query

Add a query for the CE ram size.  User mode drivers
will want to use this to determine how much size
of the cache on the CE.

Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewd-by: Jammy Zhou <Jammy.Zhou@amd.com>
9 years agodrm/amdgpu add max_memory_clock for interface query (v2)
Ken Wang [Wed, 3 Jun 2015 09:36:54 +0000 (17:36 +0800)]
drm/amdgpu add max_memory_clock for interface query (v2)

Add a query for the max memory clock.

v2: handle the dpm enabled case properly

Signed-off-by: Ken Wang <Qingqing.Wang@amd.com>
Reviewd-by: Jammy Zhou <Jammy.Zhou@amd.com>
9 years agodrm/amdgpu: add hdp flush for gfx8 compute ring
monk.liu [Wed, 3 Jun 2015 08:32:49 +0000 (16:32 +0800)]
drm/amdgpu: add hdp flush for gfx8 compute ring

We had forgotten to register the callback.

Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: jammy zhou <jammy.zhou@amd.com>
9 years agodrm/amdgpu: fix no hdp flush for compute ring
monk.liu [Tue, 2 Jun 2015 07:50:33 +0000 (15:50 +0800)]
drm/amdgpu: fix no hdp flush for compute ring

No pfp on compute.

Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
9 years agodrm/amdgpu: add HEVC/H.265 UVD support
Christian König [Tue, 5 May 2015 14:36:01 +0000 (16:36 +0200)]
drm/amdgpu: add HEVC/H.265 UVD support

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: stop loading firmware with pm.mutex locked
Christian König [Thu, 28 May 2015 20:02:26 +0000 (22:02 +0200)]
drm/amdgpu: stop loading firmware with pm.mutex locked

Loading firmware is a rather complicated process, in the end we add a
dependency between the pm mutex and the mm semaphore which results in
a harmless but annoying error message.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
9 years agodrm/amdgpu: remove mclk_lock
Christian König [Wed, 27 May 2015 08:22:47 +0000 (10:22 +0200)]
drm/amdgpu: remove mclk_lock

Not needed any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: fix description of vm_size module parameter (v2)
Alex Deucher [Mon, 11 May 2015 20:20:58 +0000 (16:20 -0400)]
drm/amdgpu: fix description of vm_size module parameter (v2)

default is 8GB, not 4GB.

v2: fix fallback setting when the user provides an invalid input

Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: remove all sh mem register modification in vm flush
monk.liu [Wed, 27 May 2015 06:03:22 +0000 (14:03 +0800)]
drm/amdgpu: remove all sh mem register modification in vm flush

Leave that at the values set during init.  No need to update
them repeatedly.

Signed-off-by: monk.liu <monk.liu@amd.com>
Signed-off-by: David Zhang <david1.zhang@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <jammy.zhou@amd.com>
9 years agodrm/amdgpu: rename GEM_OP_SET_INITIAL_DOMAIN -> GEM_OP_SET_PLACEMENT
Marek Olšák [Wed, 27 May 2015 12:30:38 +0000 (14:30 +0200)]
drm/amdgpu: rename GEM_OP_SET_INITIAL_DOMAIN -> GEM_OP_SET_PLACEMENT

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: fence should be added to shared slot
monk.liu [Tue, 26 May 2015 07:03:45 +0000 (15:03 +0800)]
drm/amdgpu: fence should be added to shared slot

Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: jammy zhou <jammy.zhou@amd.com>
9 years agodrm/amdgpu: sync fence of clear_invalids (v2)
monk.liu [Tue, 26 May 2015 07:01:54 +0000 (15:01 +0800)]
drm/amdgpu: sync fence of clear_invalids (v2)

bo_va may un-initialized, fix it.

Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <jammy.zhou@amd.com>
9 years agodrm/amdgpu: max_pde_used usage should be under protect
monk.liu [Tue, 26 May 2015 02:22:41 +0000 (10:22 +0800)]
drm/amdgpu: max_pde_used usage should be under protect

Need to take the lock when accessing this.

Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <jammy.zhou@amd.com>
9 years agodrm/amdgpu: fix bug of vm_bo_map (v2)
monk.liu [Mon, 25 May 2015 06:44:05 +0000 (14:44 +0800)]
drm/amdgpu: fix bug of vm_bo_map (v2)

call reservation_object_reserve_shared before amdgpu_bo_fence

Signed-off-by: monk.liu <monk.liu@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Jammy Zhou <jammy.zhou@amd.com>
9 years agodrm/amdgpu: implement the allocation range (v3)
Chunming Zhou [Fri, 24 Apr 2015 09:37:30 +0000 (17:37 +0800)]
drm/amdgpu: implement the allocation range (v3)

Pass a ttm_placement pointer to amdgpu_bo_create_restricted
add min_offset to amdgpu_bo_pin_restricted.  This makes it
easier to allocate memory with address restrictions.  With
this patch we can also enable 2-ended allocation again.

v2: fix rebase conflicts
v3: memset placements before using

Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: Chunming Zhou <david1.zhou@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: rename amdgpu_ip_funcs to amd_ip_funcs (v2)
yanyang1 [Fri, 22 May 2015 18:39:35 +0000 (14:39 -0400)]
drm/amdgpu: rename amdgpu_ip_funcs to amd_ip_funcs (v2)

The structure is renamed and moved to amd_shared.h to make
the component independent.  This makes it easier to add
new components in the future.

v2: fix include path

Reviewed-by: Jammy Zhou <Jammy.Zhou@amd.com>
Signed-off-by: yanyang1 <young.yang@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: drop allocation flag masks
Christian König [Tue, 19 May 2015 14:08:02 +0000 (16:08 +0200)]
drm/amdgpu: drop allocation flag masks

Not needed any more.

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
9 years agodrm/amdgpu: drop AMDGPU_FENCE_SIGNALED_SEQ
Christian König [Fri, 22 May 2015 08:55:47 +0000 (10:55 +0200)]
drm/amdgpu: drop AMDGPU_FENCE_SIGNALED_SEQ

It's causing issues with VMID handling and comparing the
fence value two times actually doesn't make handling faster.

Port of radeon commit "d6d5c5b8364bcc4d52cddc68bcb0a330d2af20f3".

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Monk Liu <monk.liu@amd.com>
9 years agodrm/amdgpu: port fault_reserve_notify changes from radeon
Christian König [Thu, 21 May 2015 15:03:46 +0000 (17:03 +0200)]
drm/amdgpu: port fault_reserve_notify changes from radeon

Signed-off-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: enable uvd dpm and powergating
Sonny Jiang [Tue, 12 May 2015 20:13:35 +0000 (16:13 -0400)]
drm/amdgpu: enable uvd dpm and powergating

Enable UVD dpm (dynamic power management) and powergating.  UVD dpm dynamically scales the UVD
clocks on demand.  Powergating turns off the power to the block when it's not in use.

Signed-off-by: Sonny Jiang <sonny.jiang@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: implement VCE two instances support
Leo Liu [Wed, 6 May 2015 19:20:41 +0000 (15:20 -0400)]
drm/amdgpu: implement VCE two instances support

VCE 3.0 has two indentical instances in the engine, they share
the same registers name in differrent memory block distinguished
by the grbm_gfx_index, we set to master instance after init, it
will dispatch task to slave instance. These two instances will
share the same firmware, but have their own stacks and heaps.

v2: add mutex for using grbm_gfx_index

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
9 years agodrm/amdgpu: recalculate VCE firmware BO size
Leo Liu [Wed, 6 May 2015 18:31:27 +0000 (14:31 -0400)]
drm/amdgpu: recalculate VCE firmware BO size

Firmware required BO size changes in terms of ASIC family

Signed-off-by: Leo Liu <leo.liu@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Reviewed-by: Christian König <christian.koenig@amd.com>
9 years agodrm/amdgpu: remove unused TRACE_SYSTEM_STRING define
Alex Deucher [Thu, 21 May 2015 06:24:48 +0000 (02:24 -0400)]
drm/amdgpu: remove unused TRACE_SYSTEM_STRING define

Port of 77cb2fea1e5fc4b083dd967f231bbf6edd96150e to
amdgpu.

Reviewed-by: Christian König <christian.koenig@amd.com>
Signed-off-by: Alex Deucher <alexander.deucher@amd.com>
9 years agodrm/amdgpu: rework tiling flags
Marek Olšák [Thu, 14 May 2015 21:48:26 +0000 (23:48 +0200)]
drm/amdgpu: rework tiling flags

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>
9 years agodrm/amdgpu: don't set unused tiling flags
Marek Olšák [Thu, 14 May 2015 21:03:57 +0000 (23:03 +0200)]
drm/amdgpu: don't set unused tiling flags

Signed-off-by: Marek Olšák <marek.olsak@amd.com>
Reviewed-by: Alex Deucher <alexander.deucher@amd.com>
Acked-by: Christian König <christian.koenig@amd.com>