git.openwrt.org Git - openwrt/staging/blogic.git/log

devlink: convert occ_get op to separate registration

This resolves race during initialization where the resources with
ops are registered before driver and the structures used by occ_get
op is initialized. So keep occ_get callbacks registered only when
all structs are initialized.

The example flows, as it is in mlxsw:
1) driver load/asic probe:
   mlxsw_core
      -> mlxsw_sp_resources_register
        -> mlxsw_sp_kvdl_resources_register
          -> devlink_resource_register IDX
   mlxsw_spectrum
      -> mlxsw_sp_kvdl_init
        -> mlxsw_sp_kvdl_parts_init
          -> mlxsw_sp_kvdl_part_init
            -> devlink_resource_size_get IDX (to get the current setup
                                              size from devlink)
        -> devlink_resource_occ_get_register IDX (register current
                                                  occupancy getter)
2) reload triggered by devlink command:
  -> mlxsw_devlink_core_bus_device_reload
    -> mlxsw_sp_fini
      -> mlxsw_sp_kvdl_fini
-> devlink_resource_occ_get_unregister IDX
    (struct mlxsw_sp *mlxsw_sp is freed at this point, call to occ get
     which is using mlxsw_sp would cause use-after free)
    -> mlxsw_sp_init
      -> mlxsw_sp_kvdl_init
        -> mlxsw_sp_kvdl_parts_init
          -> mlxsw_sp_kvdl_part_init
            -> devlink_resource_size_get IDX (to get the current setup
                                              size from devlink)
        -> devlink_resource_occ_get_register IDX (register current
                                                  occupancy getter)

Fixes: d9f9b9a4d05f ("devlink: Add support for resource abstraction")
Signed-off-by: Jiri Pirko <jiri@mellanox.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ARM: dts: ls1021a: Specify TBIPA register address

The current (mildly evil) fsl_pq_mdio code uses an undocumented shadow of
the TBIPA register on LS1021A, which happens to be read-only.
Changing TBI PHY address therefore does not work on LS1021A.

The real (and documented) address of the TBIPA registere lies in the eTSEC
block and not in MDIO/MII, which is read/write, so using that fixes
the problem.

Signed-off-by: Esben Haabendal <eha@deif.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/fsl_pq_mdio: Allow explicit speficition of TBIPA address

This introduces a simpler and generic method for for finding (and mapping)
the TBIPA register.

Instead of relying of complicated logic for finding the TBIPA register
address based on the MDIO or MII register block base
address, which even in some cases relies on undocumented shadow registers,
a second "reg" entry for the mdio bus devicetree node specifies the TBIPA
register.

Backwards compatibility is kept, as the existing logic is applied when
only a single "reg" mapping is specified.

Signed-off-by: Esben Haabendal <eha@deif.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ibmvnic-Fix-driver-reset-and-DMA-bugs'

Thomas Falcon says:

====================
ibmvnic: Fix driver reset and DMA bugs

This patch series introduces some fixes to the driver reset
routines and a patch that fixes mistakes caught by the kernel
DMA debugger.

The reset fixes include a fix to reset TX queue counters properly
after a reset as well as updates to driver reset error-handling code.
It also provides updates to the reset handling routine for redundant
backing VF failover and partition migration cases.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: Do not reset CRQ for Mobility driver resets

When resetting the ibmvnic driver after a partition migration occurs
there is no requirement to do a reset of the main CRQ. The current
driver code does the required re-enable of the main CRQ, then does
a reset of the main CRQ later.

What we should be doing for a driver reset after a migration is to
re-enable the main CRQ, release all the sub-CRQs, and then allocate
new sub-CRQs after capability negotiation.

This patch updates the handling of mobility resets to do the proper
work and not reset the main CRQ. To do this the initialization/reset
of the main CRQ had to be moved out of the ibmvnic_init routine
and in to the ibmvnic_probe and do_reset routines.

Signed-off-by: Nathan Fontenot <nfont@linux.vnet.ibm.com>
Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: Fix failover case for non-redundant configuration

There is a failover case for a non-redundant pseries VNIC
configuration that was not being handled properly. The current
implementation assumes that the driver will always have a redandant
device to communicate with following a failover notification. There
are cases, however, when a non-redundant configuration can receive
a failover request. If that happens, the driver should wait until
it receives a signal that the device is ready for operation.

The driver is agnostic of its backing hardware configuration,
so this fix necessarily affects all device failover management.
The driver needs to wait until it receives a signal that the device
is ready for resetting. A flag is introduced to track this intermediary
state where the driver is waiting for an active device.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: Fix reset scheduler error handling

In some cases, if the driver is waiting for a reset following
a device parameter change, failure to schedule a reset can result
in a hang since a completion signal is never sent.

If the device configuration is being altered by a tool such
as ethtool or ifconfig, it could cause the console to hang
if the reset request does not get scheduled. Add some additional
error handling code to exit the wait_for_completion if there is
one in progress.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: Zero used TX descriptor counter on reset

The counter that tracks used TX descriptors pending completion
needs to be zeroed as part of a device reset. This change fixes
a bug causing transmit queues to be stopped unnecessarily and in
some cases a transmit queue stall and timeout reset. If the counter
is not reset, the remaining descriptors will not be "removed",
effectively reducing queue capacity. If the queue is over half full,
it will cause the queue to stall if stopped.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ibmvnic: Fix DMA mapping mistakes

Fix some mistakes caught by the DMA debugger. The first change
fixes a unnecessary unmap that should have been removed in an
earlier update. The next hunk fixes another bad unmap by zeroing
the bit checked to determine that an unmap is needed. The final
change fixes some buffers that are unmapped with the wrong
direction specified.

Signed-off-by: Thomas Falcon <tlfalcon@linux.vnet.ibm.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: use the right skb in tipc_sk_fill_sock_diag()

Commit 4b2e6877b879 ("tipc: Fix namespace violation in tipc_sk_fill_sock_diag")
tried to fix the crash but failed, the crash is still 100% reproducible
with it.

In tipc_sk_fill_sock_diag(), skb is the diag dump we are filling, it is not
correct to retrieve its NETLINK_CB(), instead, like other protocol diag,
we should use NETLINK_CB(cb->skb).sk here.

Reported-by: <syzbot+326e587eff1074657718@syzkaller.appspotmail.com>
Fixes: 4b2e6877b879 ("tipc: Fix namespace violation in tipc_sk_fill_sock_diag")
Fixes: c30b70deb5f4 (tipc: implement socket diagnostics for AF_TIPC)
Cc: GhantaKrishnamurthy MohanKrishna <mohan.krishna.ghanta.krishnamurthy@ericsson.com>
Cc: Jon Maloy <jon.maloy@ericsson.com>
Cc: Ying Xue <ying.xue@windriver.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: sctp_sockaddr_af must check minimal addr length for AF_INET6

Check must happen before call to ipv6_addr_v4mapped()

syzbot report was :

BUG: KMSAN: uninit-value in sctp_sockaddr_af net/sctp/socket.c:359 [inline]
BUG: KMSAN: uninit-value in sctp_do_bind+0x60f/0xdc0 net/sctp/socket.c:384
CPU: 0 PID: 3576 Comm: syzkaller968804 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
sctp_sockaddr_af net/sctp/socket.c:359 [inline]
sctp_do_bind+0x60f/0xdc0 net/sctp/socket.c:384
sctp_bind+0x149/0x190 net/sctp/socket.c:332
inet6_bind+0x1fd/0x1820 net/ipv6/af_inet6.c:293
SYSC_bind+0x3f2/0x4b0 net/socket.c:1474
SyS_bind+0x54/0x80 net/socket.c:1460
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x43fd49
RSP: 002b:00007ffe99df3d28 EFLAGS: 00000213 ORIG_RAX: 0000000000000031
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 000000000043fd49
RDX: 0000000000000010 RSI: 0000000020000000 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 00000000004002c8 R09: 00000000004002c8
R10: 00000000004002c8 R11: 0000000000000213 R12: 0000000000401670
R13: 0000000000401700 R14: 0000000000000000 R15: 0000000000000000

Local variable description: ----address@SYSC_bind
Variable was created at:
SYSC_bind+0x6f/0x4b0 net/socket.c:1461
SyS_bind+0x54/0x80 net/socket.c:1460

Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: Discard frames from unused ports

The Marvell switches under some conditions will pass a frame to the
host with the port being the CPU port. Such frames are invalid, and
should be dropped. Not dropping them can result in a crash when
incrementing the receive statistics for an invalid port.

Reported-by: Chris Healy <cphealy@gmail.com>
Fixes: 91da11f870f0 ("net: Distributed Switch Architecture protocol support")
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Reviewed-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

sctp: do not leak kernel memory to user space

syzbot produced a nice report [1]

Issue here is that a recvmmsg() managed to leak 8 bytes of kernel memory
to user space, because sin_zero (padding field) was not properly cleared.

[1]
BUG: KMSAN: uninit-value in copy_to_user include/linux/uaccess.h:184 [inline]
BUG: KMSAN: uninit-value in move_addr_to_user+0x32e/0x530 net/socket.c:227
CPU: 1 PID: 3586 Comm: syzkaller481044 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
kmsan_internal_check_memory+0x164/0x1d0 mm/kmsan/kmsan.c:1176
kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199
copy_to_user include/linux/uaccess.h:184 [inline]
move_addr_to_user+0x32e/0x530 net/socket.c:227
___sys_recvmsg+0x4e2/0x810 net/socket.c:2211
__sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313
SYSC_recvmmsg+0x29b/0x3e0 net/socket.c:2394
SyS_recvmmsg+0x76/0xa0 net/socket.c:2378
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x4401c9
RSP: 002b:00007ffc56f73098 EFLAGS: 00000217 ORIG_RAX: 000000000000012b
RAX: ffffffffffffffda RBX: 00000000004002c8 RCX: 00000000004401c9
RDX: 0000000000000001 RSI: 0000000020003ac0 RDI: 0000000000000003
RBP: 00000000006ca018 R08: 0000000020003bc0 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000217 R12: 0000000000401af0
R13: 0000000000401b80 R14: 0000000000000000 R15: 0000000000000000

Local variable description: ----addr@___sys_recvmsg
Variable was created at:
___sys_recvmsg+0xd5/0x810 net/socket.c:2172
__sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313

Bytes 8-15 of 16 are uninitialized

==================================================================
Kernel panic - not syncing: panic_on_warn set ...

CPU: 1 PID: 3586 Comm: syzkaller481044 Tainted: G B 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
panic+0x39d/0x940 kernel/panic.c:183
kmsan_report+0x238/0x240 mm/kmsan/kmsan.c:1083
kmsan_internal_check_memory+0x164/0x1d0 mm/kmsan/kmsan.c:1176
kmsan_copy_to_user+0x69/0x160 mm/kmsan/kmsan.c:1199
copy_to_user include/linux/uaccess.h:184 [inline]
move_addr_to_user+0x32e/0x530 net/socket.c:227
___sys_recvmsg+0x4e2/0x810 net/socket.c:2211
__sys_recvmmsg+0x54e/0xdb0 net/socket.c:2313
SYSC_recvmmsg+0x29b/0x3e0 net/socket.c:2394
SyS_recvmmsg+0x76/0xa0 net/socket.c:2378
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Vlad Yasevich <vyasevich@gmail.com>
Cc: Neil Horman <nhorman@tuxdriver.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-fix-uninit-values-in-networking-stack'

Eric Dumazet says:

====================
net: fix uninit-values in networking stack

It seems syzbot got new features enabled, and fired some interesting
reports. Oh well.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

soreuseport: initialise timewait reuseport field

syzbot reported an uninit-value in inet_csk_bind_conflict() [1]

It turns out we never propagated sk->sk_reuseport into timewait socket.

[1]
BUG: KMSAN: uninit-value in inet_csk_bind_conflict+0x5f9/0x990 net/ipv4/inet_connection_sock.c:151
CPU: 1 PID: 3589 Comm: syzkaller008242 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
inet_csk_bind_conflict+0x5f9/0x990 net/ipv4/inet_connection_sock.c:151
inet_csk_get_port+0x1d28/0x1e40 net/ipv4/inet_connection_sock.c:320
inet6_bind+0x121c/0x1820 net/ipv6/af_inet6.c:399
SYSC_bind+0x3f2/0x4b0 net/socket.c:1474
SyS_bind+0x54/0x80 net/socket.c:1460
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x4416e9
RSP: 002b:00007ffce6d15c88 EFLAGS: 00000217 ORIG_RAX: 0000000000000031
RAX: ffffffffffffffda RBX: 0100000000000000 RCX: 00000000004416e9
RDX: 000000000000001c RSI: 0000000020402000 RDI: 0000000000000004
RBP: 0000000000000000 R08: 00000000e6d15e08 R09: 00000000e6d15e08
R10: 0000000000000004 R11: 0000000000000217 R12: 0000000000009478
R13: 00000000006cd448 R14: 0000000000000000 R15: 0000000000000000

Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:293 [inline]
kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684
__msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521
tcp_time_wait+0xf17/0xf50 net/ipv4/tcp_minisocks.c:283
tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003
tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331
sk_backlog_rcv include/net/sock.h:908 [inline]
__release_sock+0x2d6/0x680 net/core/sock.c:2271
release_sock+0x97/0x2a0 net/core/sock.c:2786
tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269
inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427
inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435
sock_release net/socket.c:595 [inline]
sock_close+0xe0/0x300 net/socket.c:1149
__fput+0x49e/0xa10 fs/file_table.c:209
____fput+0x37/0x40 fs/file_table.c:243
task_work_run+0x243/0x2c0 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x10e1/0x38d0 kernel/exit.c:867
do_group_exit+0x1a0/0x360 kernel/exit.c:970
SYSC_exit_group+0x21/0x30 kernel/exit.c:981
SyS_exit_group+0x25/0x30 kernel/exit.c:979
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:293 [inline]
kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684
__msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521
inet_twsk_alloc+0xaef/0xc00 net/ipv4/inet_timewait_sock.c:182
tcp_time_wait+0xd9/0xf50 net/ipv4/tcp_minisocks.c:258
tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003
tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331
sk_backlog_rcv include/net/sock.h:908 [inline]
__release_sock+0x2d6/0x680 net/core/sock.c:2271
release_sock+0x97/0x2a0 net/core/sock.c:2786
tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269
inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427
inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435
sock_release net/socket.c:595 [inline]
sock_close+0xe0/0x300 net/socket.c:1149
__fput+0x49e/0xa10 fs/file_table.c:209
____fput+0x37/0x40 fs/file_table.c:243
task_work_run+0x243/0x2c0 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x10e1/0x38d0 kernel/exit.c:867
do_group_exit+0x1a0/0x360 kernel/exit.c:970
SYSC_exit_group+0x21/0x30 kernel/exit.c:981
SyS_exit_group+0x25/0x30 kernel/exit.c:979
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmem_cache_alloc+0xaab/0xb90 mm/slub.c:2756
inet_twsk_alloc+0x13b/0xc00 net/ipv4/inet_timewait_sock.c:163
tcp_time_wait+0xd9/0xf50 net/ipv4/tcp_minisocks.c:258
tcp_rcv_state_process+0xebe/0x6490 net/ipv4/tcp_input.c:6003
tcp_v6_do_rcv+0x11dd/0x1d90 net/ipv6/tcp_ipv6.c:1331
sk_backlog_rcv include/net/sock.h:908 [inline]
__release_sock+0x2d6/0x680 net/core/sock.c:2271
release_sock+0x97/0x2a0 net/core/sock.c:2786
tcp_close+0x277/0x18f0 net/ipv4/tcp.c:2269
inet_release+0x240/0x2a0 net/ipv4/af_inet.c:427
inet6_release+0xaf/0x100 net/ipv6/af_inet6.c:435
sock_release net/socket.c:595 [inline]
sock_close+0xe0/0x300 net/socket.c:1149
__fput+0x49e/0xa10 fs/file_table.c:209
____fput+0x37/0x40 fs/file_table.c:243
task_work_run+0x243/0x2c0 kernel/task_work.c:113
exit_task_work include/linux/task_work.h:22 [inline]
do_exit+0x10e1/0x38d0 kernel/exit.c:867
do_group_exit+0x1a0/0x360 kernel/exit.c:970
SYSC_exit_group+0x21/0x30 kernel/exit.c:981
SyS_exit_group+0x25/0x30 kernel/exit.c:979
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2

Fixes: da5e36308d9f ("soreuseport: TCP/IPv4 implementation")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv4: fix uninit-value in ip_route_output_key_hash_rcu()

syzbot complained that res.type could be used while not initialized.

Using RTN_UNSPEC as initial value seems better than using garbage.

BUG: KMSAN: uninit-value in __mkroute_output net/ipv4/route.c:2200 [inline]
BUG: KMSAN: uninit-value in ip_route_output_key_hash_rcu+0x31f0/0x3940 net/ipv4/route.c:2493
CPU: 1 PID: 12207 Comm: syz-executor0 Not tainted 4.16.0+ #81
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
__mkroute_output net/ipv4/route.c:2200 [inline]
ip_route_output_key_hash_rcu+0x31f0/0x3940 net/ipv4/route.c:2493
ip_route_output_key_hash net/ipv4/route.c:2322 [inline]
__ip_route_output_key include/net/route.h:126 [inline]
ip_route_output_flow+0x1eb/0x3c0 net/ipv4/route.c:2577
raw_sendmsg+0x1861/0x3ed0 net/ipv4/raw.c:653
inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
SYSC_sendto+0x6c3/0x7e0 net/socket.c:1747
SyS_sendto+0x8a/0xb0 net/socket.c:1715
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x455259
RSP: 002b:00007fdc0625dc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002c
RAX: ffffffffffffffda RBX: 00007fdc0625e6d4 RCX: 0000000000455259
RDX: 0000000000000000 RSI: 0000000020000040 RDI: 0000000000000013
RBP: 000000000072bea0 R08: 0000000020000080 R09: 0000000000000010
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000004f7 R14: 00000000006fa7c8 R15: 0000000000000000

Local variable description: ----res.i.i@ip_route_output_flow
Variable was created at:
ip_route_output_flow+0x75/0x3c0 net/ipv4/route.c:2576
raw_sendmsg+0x1861/0x3ed0 net/ipv4/raw.c:653

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

dccp: initialize ireq->ir_mark

syzbot reported an uninit-value read of skb->mark in iptable_mangle_hook()

Thanks to the nice report, I tracked the problem to dccp not caring
of ireq->ir_mark for passive sessions.

BUG: KMSAN: uninit-value in ipt_mangle_out net/ipv4/netfilter/iptable_mangle.c:66 [inline]
BUG: KMSAN: uninit-value in iptable_mangle_hook+0x5e5/0x720 net/ipv4/netfilter/iptable_mangle.c:84
CPU: 0 PID: 5300 Comm: syz-executor3 Not tainted 4.16.0+ #81
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
ipt_mangle_out net/ipv4/netfilter/iptable_mangle.c:66 [inline]
iptable_mangle_hook+0x5e5/0x720 net/ipv4/netfilter/iptable_mangle.c:84
nf_hook_entry_hookfn include/linux/netfilter.h:120 [inline]
nf_hook_slow+0x158/0x3d0 net/netfilter/core.c:483
nf_hook include/linux/netfilter.h:243 [inline]
__ip_local_out net/ipv4/ip_output.c:113 [inline]
ip_local_out net/ipv4/ip_output.c:122 [inline]
ip_queue_xmit+0x1d21/0x21c0 net/ipv4/ip_output.c:504
dccp_transmit_skb+0x15eb/0x1900 net/dccp/output.c:142
dccp_xmit_packet+0x814/0x9e0 net/dccp/output.c:281
dccp_write_xmit+0x20f/0x480 net/dccp/output.c:363
dccp_sendmsg+0x12ca/0x12d0 net/dccp/proto.c:818
inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmsg net/socket.c:2080 [inline]
SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
SyS_sendmsg+0x54/0x80 net/socket.c:2087
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x455259
RSP: 002b:00007f1a4473dc68 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007f1a4473e6d4 RCX: 0000000000455259
RDX: 0000000000000000 RSI: 0000000020b76fc8 RDI: 0000000000000015
RBP: 000000000072bea0 R08: 0000000000000000 R09: 0000000000000000
R10: 0000000000000000 R11: 0000000000000246 R12: 00000000ffffffff
R13: 00000000000004f0 R14: 00000000006fa720 R15: 0000000000000000

Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:293 [inline]
kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684
__msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521
ip_queue_xmit+0x1e35/0x21c0 net/ipv4/ip_output.c:502
dccp_transmit_skb+0x15eb/0x1900 net/dccp/output.c:142
dccp_xmit_packet+0x814/0x9e0 net/dccp/output.c:281
dccp_write_xmit+0x20f/0x480 net/dccp/output.c:363
dccp_sendmsg+0x12ca/0x12d0 net/dccp/proto.c:818
inet_sendmsg+0x48d/0x740 net/ipv4/af_inet.c:764
sock_sendmsg_nosec net/socket.c:630 [inline]
sock_sendmsg net/socket.c:640 [inline]
___sys_sendmsg+0xec0/0x1310 net/socket.c:2046
__sys_sendmsg net/socket.c:2080 [inline]
SYSC_sendmsg+0x2a3/0x3d0 net/socket.c:2091
SyS_sendmsg+0x54/0x80 net/socket.c:2087
do_syscall_64+0x309/0x430 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x3d/0xa2
Uninit was stored to memory at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_save_stack mm/kmsan/kmsan.c:293 [inline]
kmsan_internal_chain_origin+0x12b/0x210 mm/kmsan/kmsan.c:684
__msan_chain_origin+0x69/0xc0 mm/kmsan/kmsan_instr.c:521
inet_csk_clone_lock+0x503/0x580 net/ipv4/inet_connection_sock.c:797
dccp_create_openreq_child+0x7f/0x890 net/dccp/minisocks.c:92
dccp_v4_request_recv_sock+0x22c/0xe90 net/dccp/ipv4.c:408
dccp_v6_request_recv_sock+0x290/0x2000 net/dccp/ipv6.c:414
dccp_check_req+0x7b9/0x8f0 net/dccp/minisocks.c:197
dccp_v4_rcv+0x12e4/0x2630 net/dccp/ipv4.c:840
ip_local_deliver_finish+0x6ed/0xd40 net/ipv4/ip_input.c:216
NF_HOOK include/linux/netfilter.h:288 [inline]
ip_local_deliver+0x43c/0x4e0 net/ipv4/ip_input.c:257
dst_input include/net/dst.h:449 [inline]
ip_rcv_finish+0x1253/0x16d0 net/ipv4/ip_input.c:397
NF_HOOK include/linux/netfilter.h:288 [inline]
ip_rcv+0x119d/0x16f0 net/ipv4/ip_input.c:493
__netif_receive_skb_core+0x47cf/0x4a80 net/core/dev.c:4562
__netif_receive_skb net/core/dev.c:4627 [inline]
process_backlog+0x62d/0xe20 net/core/dev.c:5307
napi_poll net/core/dev.c:5705 [inline]
net_rx_action+0x7c1/0x1a70 net/core/dev.c:5771
__do_softirq+0x56d/0x93d kernel/softirq.c:285
Uninit was created at:
kmsan_save_stack_with_flags mm/kmsan/kmsan.c:278 [inline]
kmsan_internal_poison_shadow+0xb8/0x1b0 mm/kmsan/kmsan.c:188
kmsan_kmalloc+0x94/0x100 mm/kmsan/kmsan.c:314
kmem_cache_alloc+0xaab/0xb90 mm/slub.c:2756
reqsk_alloc include/net/request_sock.h:88 [inline]
inet_reqsk_alloc+0xc4/0x7f0 net/ipv4/tcp_input.c:6145
dccp_v4_conn_request+0x5cc/0x1770 net/dccp/ipv4.c:600
dccp_v6_conn_request+0x299/0x1880 net/dccp/ipv6.c:317
dccp_rcv_state_process+0x2ea/0x2410 net/dccp/input.c:612
dccp_v4_do_rcv+0x229/0x340 net/dccp/ipv4.c:682
dccp_v6_do_rcv+0x16d/0x1220 net/dccp/ipv6.c:578
sk_backlog_rcv include/net/sock.h:908 [inline]
__sk_receive_skb+0x60e/0xf20 net/core/sock.c:513
dccp_v4_rcv+0x24d4/0x2630 net/dccp/ipv4.c:874
ip_local_deliver_finish+0x6ed/0xd40 net/ipv4/ip_input.c:216
NF_HOOK include/linux/netfilter.h:288 [inline]
ip_local_deliver+0x43c/0x4e0 net/ipv4/ip_input.c:257
dst_input include/net/dst.h:449 [inline]
ip_rcv_finish+0x1253/0x16d0 net/ipv4/ip_input.c:397
NF_HOOK include/linux/netfilter.h:288 [inline]
ip_rcv+0x119d/0x16f0 net/ipv4/ip_input.c:493
__netif_receive_skb_core+0x47cf/0x4a80 net/core/dev.c:4562
__netif_receive_skb net/core/dev.c:4627 [inline]
process_backlog+0x62d/0xe20 net/core/dev.c:5307
napi_poll net/core/dev.c:5705 [inline]
net_rx_action+0x7c1/0x1a70 net/core/dev.c:5771
__do_softirq+0x56d/0x93d kernel/softirq.c:285

Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fix uninit-value in __hw_addr_add_ex()

syzbot complained :

BUG: KMSAN: uninit-value in memcmp+0x119/0x180 lib/string.c:861
CPU: 0 PID: 3 Comm: kworker/0:0 Not tainted 4.16.0+ #82
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Workqueue: ipv6_addrconf addrconf_dad_work
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x185/0x1d0 lib/dump_stack.c:53
kmsan_report+0x142/0x240 mm/kmsan/kmsan.c:1067
__msan_warning_32+0x6c/0xb0 mm/kmsan/kmsan_instr.c:676
memcmp+0x119/0x180 lib/string.c:861
__hw_addr_add_ex net/core/dev_addr_lists.c:60 [inline]
__dev_mc_add+0x1c2/0x8e0 net/core/dev_addr_lists.c:670
dev_mc_add+0x6d/0x80 net/core/dev_addr_lists.c:687
igmp6_group_added+0x2db/0xa00 net/ipv6/mcast.c:662
ipv6_dev_mc_inc+0xe9e/0x1130 net/ipv6/mcast.c:914
addrconf_join_solict net/ipv6/addrconf.c:2078 [inline]
addrconf_dad_begin net/ipv6/addrconf.c:3828 [inline]
addrconf_dad_work+0x427/0x2150 net/ipv6/addrconf.c:3954
process_one_work+0x12c6/0x1f60 kernel/workqueue.c:2113
worker_thread+0x113c/0x24f0 kernel/workqueue.c:2247
kthread+0x539/0x720 kernel/kthread.c:239

Fixes: f001fde5eadd ("net: introduce a list of device addresses dev_addr_list (v6)")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: initialize skb->peeked when cloning

syzbot reported __skb_try_recv_from_queue() was using skb->peeked
while it was potentially unitialized.

We need to clear it in __skb_clone()

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fix rtnh_ok()

syzbot reported :

BUG: KMSAN: uninit-value in rtnh_ok include/net/nexthop.h:11 [inline]
BUG: KMSAN: uninit-value in fib_count_nexthops net/ipv4/fib_semantics.c:469 [inline]
BUG: KMSAN: uninit-value in fib_create_info+0x554/0x8d20 net/ipv4/fib_semantics.c:1091

@remaining is an integer, coming from user space.
If it is negative we want rtnh_ok() to return false.

Fixes: 4e902c57417c ("[IPv4]: FIB configuration using struct fib_config")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

netlink: fix uninit-value in netlink_sendmsg

syzbot reported :

BUG: KMSAN: uninit-value in ffs arch/x86/include/asm/bitops.h:432 [inline]
BUG: KMSAN: uninit-value in netlink_sendmsg+0xb26/0x1310 net/netlink/af_netlink.c:1851

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

crypto: af_alg - fix possible uninit-value in alg_bind()

syzbot reported :

BUG: KMSAN: uninit-value in alg_bind+0xe3/0xd90 crypto/af_alg.c:162

We need to check addr_len before dereferencing sa (or uaddr)

Fixes: bb30b8848c85 ("crypto: af_alg - whitelist mask and type")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Cc: Stephan Mueller <smueller@chronox.de>
Cc: Herbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: David S. Miller <davem@davemloft.net>

net_sched: fix a missing idr_remove() in u32_delete_key()

When we delete a u32 key via u32_delete_key(), we forget to
call idr_remove() to remove its handle from IDR.

Fixes: e7614370d6f0 ("net_sched: use idr to allocate u32 filter handles")
Reported-by: Marcin Kabiesz <admin@hostcenter.eu>
Tested-by: Marcin Kabiesz <admin@hostcenter.eu>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: marvell: Enable interrupt function on LED2 pin

The LED2[2]/INTn pin on Marvell 88E1318S as well as 88E1510/12/14/18 needs
to be configured to be usable as interrupt not only when WOL is enabled,
but whenever we rely on interrupts from the PHY.

Signed-off-by: Esben Haabendal <eha@deif.com>
Cc: Rasmus Villemoes <rasmus.villemoes@prevas.dk>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch '100GbE' of git://git./linux/kernel/git/jkirsher/net-queue

Jeff Kirsher says:

====================
Intel Wired LAN Driver Updates 2018-04-06

This series contains a couple of fixes for the new ice driver.

Wei Yongjun fixes the return error code for error case during init.

Anirudh fixes the incorrect use of ARRAY_SIZE() in the ice ethtool code
and fixed "for" loop calculations.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

ice: Bug fixes in ethtool code

1) Return correct size from ice_get_regs_len.
2) Fix incorrect use of ARRAY_SIZE in ice_get_regs.

Fixes: fcea6f3da546 (ice: Add stats and ethtool support)
Signed-off-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

ice: Fix error return code in ice_init_hw()

Fix to return error code ICE_ERR_NO_MEMORY from the alloc error
handling case instead of 0, as done elsewhere in this function.

Fixes: dc49c7723676 ("ice: Get MAC/PHY/link info and scheduler topology")
Signed-off-by: Wei Yongjun <weiyongjun1@huawei.com>
Acked-by: Anirudh Venkataramanan <anirudh.venkataramanan@intel.com>
Tested-by: Tony Brelinski <tonyx.brelinski@intel.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>

net/sched: fix NULL dereference in the error path of tcf_bpf_init()

when tcf_bpf_init_from_ops() fails (e.g. because of program having invalid
number of instructions), tcf_bpf_cfg_cleanup() calls bpf_prog_put(NULL) or
bpf_prog_destroy(NULL). Unless CONFIG_BPF_SYSCALL is unset, this causes
the following error:

BUG: unable to handle kernel NULL pointer dereference at 0000000000000020
PGD 800000007345a067 P4D 800000007345a067 PUD 340e1067 PMD 0
Oops: 0000 [#1] SMP PTI
Modules linked in: act_bpf(E) ip6table_filter ip6_tables iptable_filter binfmt_misc ext4 mbcache jbd2 crct10dif_pclmul crc32_pclmul ghash_clmulni_intel snd_hda_codec_generic pcbc snd_hda_intel snd_hda_codec snd_hda_core snd_hwdep snd_seq snd_seq_device snd_pcm aesni_intel crypto_simd glue_helper cryptd joydev snd_timer snd virtio_balloon pcspkr soundcore i2c_piix4 nfsd auth_rpcgss nfs_acl lockd grace sunrpc ip_tables xfs libcrc32c ata_generic pata_acpi qxl drm_kms_helper syscopyarea sysfillrect sysimgblt fb_sys_fops ttm virtio_blk drm virtio_net virtio_console i2c_core crc32c_intel serio_raw virtio_pci ata_piix libata virtio_ring floppy virtio dm_mirror dm_region_hash dm_log dm_mod [last unloaded: act_bpf]
CPU: 3 PID: 5654 Comm: tc Tainted: G            E    4.16.0.bpf_test+ #408
Hardware name: Red Hat KVM, BIOS 0.5.1 01/01/2011
RIP: 0010:__bpf_prog_put+0xc/0xc0
RSP: 0018:ffff9594003ef728 EFLAGS: 00010202
RAX: 0000000000000000 RBX: ffff9594003ef758 RCX: 0000000000000024
RDX: 0000000000000000 RSI: 0000000000000001 RDI: 0000000000000000
RBP: 0000000000000000 R08: 0000000000000001 R09: 0000000000000044
R10: 0000000000000220 R11: ffff8a7ab9f17131 R12: 0000000000000000
R13: ffff8a7ab7c3c8e0 R14: 0000000000000001 R15: ffff8a7ab88f1054
FS:  00007fcb2f17c740(0000) GS:ffff8a7abfd80000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 0000000080050033
CR2: 0000000000000020 CR3: 000000007c888006 CR4: 00000000001606e0
Call Trace:
  tcf_bpf_cfg_cleanup+0x2f/0x40 [act_bpf]
  tcf_bpf_cleanup+0x4c/0x70 [act_bpf]
  __tcf_idr_release+0x79/0x140
  tcf_bpf_init+0x125/0x330 [act_bpf]
  tcf_action_init_1+0x2cc/0x430
  ? get_page_from_freelist+0x3f0/0x11b0
  tcf_action_init+0xd3/0x1b0
  tc_ctl_action+0x18b/0x240
  rtnetlink_rcv_msg+0x29c/0x310
  ? _cond_resched+0x15/0x30
  ? __kmalloc_node_track_caller+0x1b9/0x270
  ? rtnl_calcit.isra.29+0x100/0x100
  netlink_rcv_skb+0xd2/0x110
  netlink_unicast+0x17c/0x230
  netlink_sendmsg+0x2cd/0x3c0
  sock_sendmsg+0x30/0x40
  ___sys_sendmsg+0x27a/0x290
  ? mem_cgroup_commit_charge+0x80/0x130
  ? page_add_new_anon_rmap+0x73/0xc0
  ? do_anonymous_page+0x2a2/0x560
  ? __handle_mm_fault+0xc75/0xe20
  __sys_sendmsg+0x58/0xa0
  do_syscall_64+0x6e/0x1a0
  entry_SYSCALL_64_after_hwframe+0x3d/0xa2
RIP: 0033:0x7fcb2e58eba0
RSP: 002b:00007ffc93c496c8 EFLAGS: 00000246 ORIG_RAX: 000000000000002e
RAX: ffffffffffffffda RBX: 00007ffc93c497f0 RCX: 00007fcb2e58eba0
RDX: 0000000000000000 RSI: 00007ffc93c49740 RDI: 0000000000000003
RBP: 000000005ac6a646 R08: 0000000000000002 R09: 0000000000000000
R10: 00007ffc93c49120 R11: 0000000000000246 R12: 0000000000000000
R13: 00007ffc93c49804 R14: 0000000000000001 R15: 000000000066afa0
Code: 5f 00 48 8b 43 20 48 c7 c7 70 2f 7c b8 c7 40 10 00 00 00 00 5b e9 a5 8b 61 00 0f 1f 44 00 00 0f 1f 44 00 00 41 54 55 48 89 fd 53 <48> 8b 47 20 f0 ff 08 74 05 5b 5d 41 5c c3 41 89 f4 0f 1f 44 00
RIP: __bpf_prog_put+0xc/0xc0 RSP: ffff9594003ef728
CR2: 0000000000000020

Fix it in tcf_bpf_cfg_cleanup(), ensuring that bpf_prog_{put,destroy}(f)
is called only when f is not NULL.

Fixes: bbc09e7842a5 ("net/sched: fix idr leak on the error path of tcf_bpf_init()")
Reported-by: Lucas Bates <lucasb@mojatatu.com>
Signed-off-by: Davide Caratti <dcaratti@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net/ipv6: Increment OUTxxx counters after netfilter hook

At the end of ip6_forward(), IPSTATS_MIB_OUTFORWDATAGRAMS and
IPSTATS_MIB_OUTOCTETS are incremented immediately before the NF_HOOK call
for NFPROTO_IPV6 / NF_INET_FORWARD. As a result, these counters get
incremented regardless of whether or not the netfilter hook allows the
packet to continue being processed. This change increments the counters
in ip6_forward_finish() so that it will not happen if the netfilter hook
chooses to terminate the packet, which is similar to how IPv4 works.

Signed-off-by: Jeff Barnhill <0xeffeff@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'hv_netvsc-Fix-shutdown-issues-on-older-Windows-hosts'

Mohammed Gamal says:

====================
hv_netvsc: Fix shutdown issues on older Windows hosts

Guests running on WS2012 hosts would not shutdown when changing network
interface setting (e.g. Number of channels, MTU ... etc).

This patch series addresses these shutdown issues we enecountered with WS2012
hosts. It's essentialy a rework of the series sent in
https://lkml.org/lkml/2018/1/23/111 on top of latest upstream
====================

Fixes: 0ef58b0a05c1 ("hv_netvsc: change GPAD teardown order on older versions")
Signed-off-by: David S. Miller <davem@davemloft.net>

hv_netvsc: Pass net_device parameter to revoke and teardown functions

The callers to netvsc_revoke_*_buf() and netvsc_teardown_*_gpadl()
already have their net_device instances. Pass them as a paramaeter to
the function instead of obtaining them from netvsc_device struct
everytime

Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hv_netvsc: Ensure correct teardown message sequence order

Prior to commit 0cf737808ae7 ("hv_netvsc: netvsc_teardown_gpadl() split")
the call sequence in netvsc_device_remove() was as follows (as
implemented in netvsc_destroy_buf()):
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Teardown receive buffer GPADL
3- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
4- Teardown send buffer GPADL
5- Close vmbus

This didn't work for WS2016 hosts. Commit 0cf737808ae7
("hv_netvsc: netvsc_teardown_gpadl() split") rearranged the
teardown sequence as follows:
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
3- Close vmbus
4- Teardown receive buffer GPADL
5- Teardown send buffer GPADL

That worked well for WS2016 hosts, but it prevented guests on older hosts from
shutting down after changing network settings. Commit 0ef58b0a05c1
("hv_netvsc: change GPAD teardown order on older versions") ensured the
following message sequence for older hosts
1- Send NVSP_MSG1_TYPE_REVOKE_RECV_BUF message
2- Send NVSP_MSG1_TYPE_REVOKE_SEND_BUF message
3- Teardown receive buffer GPADL
4- Teardown send buffer GPADL
5- Close vmbus

However, with this sequence calling `ip link set eth0 mtu 1000` hangs and the
process becomes uninterruptible. On futher analysis it turns out that on tearing
down the receive buffer GPADL the kernel is waiting indefinitely
in vmbus_teardown_gpadl() for a completion to be signaled.

Here is a snippet of where this occurs:
int vmbus_teardown_gpadl(struct vmbus_channel *channel, u32 gpadl_handle)
{
        struct vmbus_channel_gpadl_teardown *msg;
        struct vmbus_channel_msginfo *info;
        unsigned long flags;
        int ret;

        info = kmalloc(sizeof(*info) +
                       sizeof(struct vmbus_channel_gpadl_teardown), GFP_KERNEL);
        if (!info)
                return -ENOMEM;

        init_completion(&info->waitevent);
        info->waiting_channel = channel;
[....]
        ret = vmbus_post_msg(msg, sizeof(struct vmbus_channel_gpadl_teardown),
                             true);

        if (ret)
                goto post_msg_err;

        wait_for_completion(&info->waitevent);
[....]
}

The completion is signaled from vmbus_ongpadl_torndown(), which gets called when
the corresponding message is received from the host, which apparently never happens
in that case.
This patch works around the issue by restoring the first mentioned message sequence
for older hosts

Fixes: 0ef58b0a05c1 ("hv_netvsc: change GPAD teardown order on older versions")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hv_netvsc: Split netvsc_revoke_buf() and netvsc_teardown_gpadl()

Split each of the functions into two for each of send/recv buffers.
This will be needed in order to implement a fine-grained messaging
sequence to the host so that we accommodate the requirements of
different Windows versions

Fixes: 0ef58b0a05c12 ("hv_netvsc: change GPAD teardown order on older versions")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

hv_netvsc: Use Windows version instead of NVSP version on GPAD teardown

When changing network interface settings, Windows guests
older than WS2016 can no longer shutdown. This was addressed
by commit 0ef58b0a05c12 ("hv_netvsc: change GPAD teardown order
on older versions"), however the issue also occurs on WS2012
guests that share NVSP protocol versions with WS2016 guests.
Hence we use Windows version directly to differentiate them.

Fixes: 0ef58b0a05c12 ("hv_netvsc: change GPAD teardown order on older versions")
Signed-off-by: Mohammed Gamal <mgamal@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: mvpp2: Fix parser entry init boundary check

Boundary check in mvpp2_prs_init_from_hw must be done according to the
passed "tid" parameter, not the mvpp2_prs_entry index, which is not yet
initialized at the time of the check.

Fixes: 47e0e14eb1a6 ("net: mvpp2: Make mvpp2_prs_hw_read a parser entry init function")
Signed-off-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

arp: fix arp_filter on l3slave devices

arp_filter performs an ip_route_output search for arp source address and
checks if output device is the same where the arp request was received,
if it is not, the arp request is not answered.

This route lookup is always done on main route table so l3slave devices
never find the proper route and arp is not answered.

Passing l3mdev_master_ifindex_rcu(dev) return value as oif fixes the
lookup for l3slave devices while maintaining same behavior for non
l3slave devices as this function returns 0 in that case.

Fixes: 613d09b30f8b ("net: Use VRF device index for lookups on TX")
Signed-off-by: Miguel Fadon Perlines <mfadon@teldat.com>
Acked-by: David Ahern <dsa@cumulusnetworks.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-tunnel-name-validate'

Eric Dumazet says:

====================
net: better validate user provided tunnel names

This series changes dev_valid_name() to not attempt reading
a possibly too long user-provided device name, then use
this helper in five different tunnel providers.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

vti6: better validate user provided tunnel names

Use valid_name() to make sure user does not provide illegal
device name.

Fixes: ed1efb2aefbb ("ipv6: Add support for IPsec virtual tunnel interfaces")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Cc: Steffen Klassert <steffen.klassert@secunet.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_tunnel: better validate user provided tunnel names

Use valid_name() to make sure user does not provide illegal
device name.

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip6_gre: better validate user provided tunnel names

Use dev_valid_name() to make sure user does not provide illegal
device name.

syzbot caught the following bug :

BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline]
BUG: KASAN: stack-out-of-bounds in ip6gre_tunnel_locate+0x334/0x860 net/ipv6/ip6_gre.c:339
Write of size 20 at addr ffff8801afb9f7b8 by task syzkaller851048/4466

CPU: 1 PID: 4466 Comm: syzkaller851048 Not tainted 4.16.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x1b9/0x29f lib/dump_stack.c:53
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
memcpy+0x37/0x50 mm/kasan/kasan.c:303
strlcpy include/linux/string.h:300 [inline]
ip6gre_tunnel_locate+0x334/0x860 net/ipv6/ip6_gre.c:339
ip6gre_tunnel_ioctl+0x69d/0x12e0 net/ipv6/ip6_gre.c:1195
dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334
dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525
sock_ioctl+0x47e/0x680 net/socket.c:1015
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:500 [inline]
do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684
ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
SYSC_ioctl fs/ioctl.c:708 [inline]
SyS_ioctl+0x24/0x30 fs/ioctl.c:706
do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: c12b395a4664 ("gre: Support GRE over IPv6")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: sit: better validate user provided tunnel names

Use dev_valid_name() to make sure user does not provide illegal
device name.

syzbot caught the following bug :

BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline]
BUG: KASAN: stack-out-of-bounds in ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254
Write of size 33 at addr ffff8801b64076d8 by task syzkaller932654/4453

CPU: 0 PID: 4453 Comm: syzkaller932654 Not tainted 4.16.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x1b9/0x29f lib/dump_stack.c:53
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
memcpy+0x37/0x50 mm/kasan/kasan.c:303
strlcpy include/linux/string.h:300 [inline]
ipip6_tunnel_locate+0x63b/0xaa0 net/ipv6/sit.c:254
ipip6_tunnel_ioctl+0xe71/0x241b net/ipv6/sit.c:1221
dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334
dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525
sock_ioctl+0x47e/0x680 net/socket.c:1015
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:500 [inline]
do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684
ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
SYSC_ioctl fs/ioctl.c:708 [inline]
SyS_ioctl+0x24/0x30 fs/ioctl.c:706
do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: 1da177e4c3f4 ("Linux-2.6.12-rc2")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ip_tunnel: better validate user provided tunnel names

Use dev_valid_name() to make sure user does not provide illegal
device name.

syzbot caught the following bug :

BUG: KASAN: stack-out-of-bounds in strlcpy include/linux/string.h:300 [inline]
BUG: KASAN: stack-out-of-bounds in __ip_tunnel_create+0xca/0x6b0 net/ipv4/ip_tunnel.c:257
Write of size 20 at addr ffff8801ac79f810 by task syzkaller268107/4482

CPU: 0 PID: 4482 Comm: syzkaller268107 Not tainted 4.16.0+ #1
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x1b9/0x29f lib/dump_stack.c:53
print_address_description+0x6c/0x20b mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report.cold.7+0xac/0x2f5 mm/kasan/report.c:412
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x13e/0x1b0 mm/kasan/kasan.c:267
memcpy+0x37/0x50 mm/kasan/kasan.c:303
strlcpy include/linux/string.h:300 [inline]
__ip_tunnel_create+0xca/0x6b0 net/ipv4/ip_tunnel.c:257
ip_tunnel_create net/ipv4/ip_tunnel.c:352 [inline]
ip_tunnel_ioctl+0x818/0xd40 net/ipv4/ip_tunnel.c:861
ipip_tunnel_ioctl+0x1c5/0x420 net/ipv4/ipip.c:350
dev_ifsioc+0x43e/0xb90 net/core/dev_ioctl.c:334
dev_ioctl+0x69a/0xcc0 net/core/dev_ioctl.c:525
sock_ioctl+0x47e/0x680 net/socket.c:1015
vfs_ioctl fs/ioctl.c:46 [inline]
file_ioctl fs/ioctl.c:500 [inline]
do_vfs_ioctl+0x1cf/0x1650 fs/ioctl.c:684
ksys_ioctl+0xa9/0xd0 fs/ioctl.c:701
SYSC_ioctl fs/ioctl.c:708 [inline]
SyS_ioctl+0x24/0x30 fs/ioctl.c:706
do_syscall_64+0x29e/0x9d0 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7

Fixes: c54419321455 ("GRE: Refactor GRE tunneling code.")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: syzbot <syzkaller@googlegroups.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: fool proof dev_valid_name()

We want to use dev_valid_name() to validate tunnel names,
so better use strnlen(name, IFNAMSIZ) than strlen(name) to make
sure to not upset KASAN.

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge tag 'char-misc-4.17-rc1' of git://git./linux/kernel/git/gregkh/char-misc

Pull char/misc updates from Greg KH:
"Here is the big set of char/misc driver patches for 4.17-rc1.

  There are a lot of little things in here, nothing huge, but all
  important to the different hardware types involved:

   -  thunderbolt driver updates

   -  parport updates (people still care...)

   -  nvmem driver updates

   -  mei updates (as always)

   -  hwtracing driver updates

   -  hyperv driver updates

   -  extcon driver updates

   -  ... and a handful of even smaller driver subsystem and individual
      driver updates

  All of these have been in linux-next with no reported issues"

* tag 'char-misc-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/char-misc: (149 commits)
  hwtracing: Add HW tracing support menu
  intel_th: Add ACPI glue layer
  intel_th: Allow forcing host mode through drvdata
  intel_th: Pick up irq number from resources
  intel_th: Don't touch switch routing in host mode
  intel_th: Use correct method of finding hub
  intel_th: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate
  stm class: Make dummy's master/channel ranges configurable
  stm class: Add SPDX GPL-2.0 header to replace GPLv2 boilerplate
  MAINTAINERS: Bestow upon myself the care for drivers/hwtracing
  hv: add SPDX license id to Kconfig
  hv: add SPDX license to trace
  Drivers: hv: vmbus: do not mark HV_PCIE as perf_device
  Drivers: hv: vmbus: respect what we get from hv_get_synint_state()
  /dev/mem: Avoid overwriting "err" in read_mem()
  eeprom: at24: use SPDX identifier instead of GPL boiler-plate
  eeprom: at24: simplify the i2c functionality checking
  eeprom: at24: fix a line break
  eeprom: at24: tweak newlines
  eeprom: at24: refactor at24_probe()
  ...

Merge tag 'driver-core-4.17-rc1' of git://git./linux/kernel/git/gregkh/driver-core

Pull driver core updates from Greg KH:
"Here is the "big" set of driver core patches for 4.17-rc1.

  There's really not much here, just a bunch of firmware code
  refactoring from Luis as he attempts to wrangle that codebase into
  something that is managable, along with a bunch of userspace tests for
  it. Other than that, a handful of small bugfixes and reverts of things
  that didn't work out.

  Full details are in the shortlog, it's not all that much.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'driver-core-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core: (30 commits)
  drivers: base: remove check for callback in coredump_store()
  mt7601u: use firmware_request_cache() to address cache on reboot
  firmware: add firmware_request_cache() to help with cache on reboot
  firmware: fix typo on pr_info_once() when ignore_sysfs_fallback is used
  firmware: explicitly include vmalloc.h
  firmware: ensure the firmware cache is not used on incompatible calls
  test_firmware: modify custom fallback tests to use unique files
  firmware: add helper to check to see if fw cache is setup
  firmware: fix checking for return values for fw_add_devm_name()
  rename: _request_firmware_load() fw_load_sysfs_fallback()
  test_firmware: test three firmware kernel configs using a proc knob
  test_firmware: expand on library with shared helpers
  firmware: enable to force disable the fallback mechanism at run time
  firmware: enable run time change of forcing fallback loader
  firmware: move firmware loader into its own directory
  firmware: split firmware fallback functionality into its own file
  firmware: move loading timeout under struct firmware_fallback_config
  firmware: use helpers for setting up a temporary cache timeout
  firmware: simplify CONFIG_FW_LOADER_USER_HELPER_FALLBACK further
  drivers: base: add description for .coredump() callback
  ...

Merge tag 'staging-4.17-rc1' of git://git./linux/kernel/git/gregkh/staging

Pull staging/IIO updates from Greg KH:
"Here is the big set of Staging/IIO driver patches for 4.17-rc1.

  It is a lot, over 500 changes, but not huge by previous kernel release
  standards. We deleted more lines than we added again (27k added vs.
  91k remvoed), thanks to finally being able to delete the IRDA drivers
  and networking code.

  We also deleted the ccree crypto driver, but that's coming back in
  through the crypto tree to you, in a much cleaned-up form.

  Added this round is at lot of "mt7621" device support, which is for an
  embedded device that Neil Brown cares about, and of course a handful
  of new IIO drivers as well.

  And finally, the fsl-mc core code moved out of the staging tree to the
  "real" part of the kernel, which is nice to see happen as well.

  Full details are in the shortlog, which has all of the tiny cleanup
  patches described.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'staging-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging: (579 commits)
  staging: rtl8723bs: Remove yield call, replace with cond_resched()
  staging: rtl8723bs: Replace yield() call with cond_resched()
  staging: rtl8723bs: Remove unecessary newlines from 'odm.h'.
  staging: rtl8723bs: Rework 'struct _ODM_Phy_Status_Info_' coding style.
  staging: rtl8723bs: Rework 'struct _ODM_Per_Pkt_Info_' coding style.
  staging: rtl8723bs: Replace NULL pointer comparison with '!'.
  staging: rtl8723bs: Factor out rtl8723bs_recv_tasklet() sections.
  staging: rtl8723bs: Fix function signature that goes over 80 characters.
  staging: rtl8723bs: Fix lines too long in update_recvframe_attrib().
  staging: rtl8723bs: Remove unnecessary blank lines in 'rtl8723bs_recv.c'.
  staging: rtl8723bs: Change camel case to snake case in 'rtl8723bs_recv.c'.
  staging: rtl8723bs: Add missing braces in else statement.
  staging: rtl8723bs: Add spaces around ternary operators.
  staging: rtl8723bs: Fix lines with trailing open parentheses.
  staging: rtl8723bs: Remove unnecessary length #define's.
  staging: rtl8723bs: Fix IEEE80211 authentication algorithm constants.
  staging: rtl8723bs: Fix alignment in rtw_wx_set_auth().
  staging: rtl8723bs: Remove braces from single statement conditionals.
  staging: rtl8723bs: Remove unecessary braces from switch statement.
  staging: rtl8723bs: Fix newlines in rtw_wx_set_auth().
  ...

Merge tag 'tty-4.17-rc1' of git://git./linux/kernel/git/gregkh/tty

Pull tty/serial driver updates from Greg KH:
"Here is the big set of tty and serial driver patches for 4.17-rc1

  Not all that big really, most are just small fixes and additions to
  existing drivers. There's a bunch of work on the imx serial driver
  recently for some reason, and a new embedded serial driver added as
  well.

  Full details are in the shortlog.

  All of these have been in the linux-next tree for a while with no
  reported issues"

* tag 'tty-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/tty: (66 commits)
  serial: expose buf_overrun count through proc interface
  serial: mvebu-uart: fix tx lost characters
  tty: serial: msm_geni_serial: Fix return value check in qcom_geni_serial_probe()
  tty: serial: msm_geni_serial: Add serial driver support for GENI based QUP
  8250-men-mcb: add support for 16z025 and 16z057
  powerpc: Mark the variable earlycon_acpi_spcr_enable maybe_unused
  serial: stm32: fix initialization of RS485 mode
  ARM: dts: STi: Remove "console=ttyASN" from bootargs for STi boards
  vt: change SGR 21 to follow the standards
  serdev: Fix typo in serdev_device_alloc
  ARM: dts: STi: Fix aliases property name for STi boards
  tty: st-asc: Update tty alias
  serial: stm32: add support for RS485 hardware control mode
  dt-bindings: serial: stm32: add RS485 optional properties
  selftests: add devpts selftests
  devpts: comment devpts_mntget()
  devpts: resolve devpts bind-mounts
  devpts: hoist out check for DEVPTS_SUPER_MAGIC
  serial: 8250: Add Nuvoton NPCM UART
  serial: mxs-auart: disable clks of Alphascale ASM9260
  ...

Merge tag 'usb-4.17-rc1' of git://git./linux/kernel/git/gregkh/usb

Pull USB/PHY updates from Greg KH:
"Here is the big set of USB and PHY driver patches for 4.17-rc1.

  Lots of USB typeC work happened this round, with code moving from the
  staging directory into the "real" part of the kernel, as well as new
  infrastructure being added to be able to handle the different types of
  "roles" that typeC requires.

  There is also the normal huge set of USB gadget controller and driver
  updates, along with XHCI changes, and a raft of other tiny fixes all
  over the USB tree. And the PHY driver updates are merged in here as
  well as they interacted with the USB drivers in some places.

  All of these have been in linux-next for a while with no reported
  issues"

* tag 'usb-4.17-rc1' of git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/usb: (250 commits)
  Revert "USB: serial: ftdi_sio: add Id for Physik Instrumente E-870"
  usb: musb: gadget: misplaced out of bounds check
  usb: chipidea: imx: Fix ULPI on imx53
  usb: chipidea: imx: Cleanup ci_hdrc_imx_platform_flag
  usb: chipidea: usbmisc: small clean up
  usb: chipidea: usbmisc: evdo can be set e/o reset
  usb: chipidea: usbmisc: evdo is only specific to OTG port
  USB: serial: ftdi_sio: add Id for Physik Instrumente E-870
  usb: dwc3: gadget: never call ->complete() from ->ep_queue()
  usb: gadget: udc: core: update usb_ep_queue() documentation
  usb: host: Remove the deprecated ATH79 USB host config options
  usb: roles: Fix return value check in intel_xhci_usb_probe()
  USB: gadget: f_midi: fixing a possible double-free in f_midi
  usb: core: Add USB_QUIRK_DELAY_CTRL_MSG to usbcore quirks
  usb: core: Copy parameter string correctly and remove superfluous null check
  USB: announce bcdDevice as well as idVendor, idProduct.
  USB:fix USB3 devices behind USB3 hubs not resuming at hibernate thaw
  usb: hub: Reduce warning to notice on power loss
  USB: serial: ftdi_sio: add support for Harman FirmwareHubEmulator
  USB: serial: cp210x: add ELDAT Easywave RX09 id
  ...

Merge git://git./linux/kernel/git/davem/net

Pull networking fixes from David Miller:
"This fixes some fallout from the net-next merge the other day, plus
  some non-merge-window-related bug fixes:

  1) Fix sparse warnings in bcmgenet, systemport, b53, and mt7530
     (Florian Fainelli)

  2) pptp does a bogus dst_release() on a route we have a single
     refcount on, and attached to a socket, which needs that refcount
     (Eric Dumazet)

  3) UDP connected sockets on ipv6 can race with route update handling,
     resulting in a pre-PMTU update route still stuck on the socket and
     thus continuing to get ICMPV6_PKT_TOOBIG errors. We end up never
     seeing the updated route. (Alexey Kodanev)

  4) Missing list initializer(s) in TIPC (Jon Maloy)

  5) Connect phy early to prevent crashes in lan78xx driver (Alexander
     Graf)

  6) Fix build with modular NVMEM (Arnd Bergmann)

  7) netdevsim canot mark nsim_devlink_net_ops and nsim_fib_net_ops as
     __net_initdata, as these are references from module unload
     unconditionally (Arnd Bergmann)"

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (23 commits)
  netdevsim: remove incorrect __net_initdata annotations
  sfc: remove ctpio_dmabuf_start from stats
  inet: frags: fix ip6frag_low_thresh boundary
  tipc: Fix namespace violation in tipc_sk_fill_sock_diag
  net: avoid unneeded atomic operation in ip*_append_data()
  nvmem: disallow modular CONFIG_NVMEM
  net: hns3: fix length overflow when CONFIG_ARM64_64K_PAGES
  nfp: use full 40 bits of the NSP buffer address
  lan78xx: Connect phy early
  nfp: add a separate counter for packets with CHECKSUM_COMPLETE
  tipc: Fix missing list initializations in struct tipc_subscription
  ipv6: udp: set dst cache for a connected sk if current not valid
  ipv6: udp: convert 'connected' to bool type in udpv6_sendmsg()
  ipv6: allow to cache dst for a connected sk in ip6_sk_dst_lookup_flow()
  ipv6: add a wrapper for ip6_dst_store() with flowi6 checks
  net: phy: marvell10g: add thermal hwmon device
  pptp: remove a buggy dst release in pptp_connect()
  net: dsa: mt7530: Use NULL instead of plain integer
  net: dsa: b53: Fix sparse warnings in b53_mmap.c
  af_unix: remove redundant lockdep class
  ...

Merge branch 'linus' of git://git./linux/kernel/git/herbert/crypto-2.6

Pull crypto updates from Herbert Xu:
"API:

   - add AEAD support to crypto engine

   - allow batch registration in simd

  Algorithms:

   - add CFB mode

   - add speck block cipher

   - add sm4 block cipher

   - new test case for crct10dif

   - improve scheduling latency on ARM

   - scatter/gather support to gcm in aesni

   - convert x86 crypto algorithms to skcihper

  Drivers:

   - hmac(sha224/sha256) support in inside-secure

   - aes gcm/ccm support in stm32

   - stm32mp1 support in stm32

   - ccree driver from staging tree

   - gcm support over QI in caam

   - add ks-sa hwrng driver"

* 'linus' of git://git.kernel.org/pub/scm/linux/kernel/git/herbert/crypto-2.6: (212 commits)
  crypto: ccree - remove unused enums
  crypto: ahash - Fix early termination in hash walk
  crypto: brcm - explicitly cast cipher to hash type
  crypto: talitos - don't leak pointers to authenc keys
  crypto: qat - don't leak pointers to authenc keys
  crypto: picoxcell - don't leak pointers to authenc keys
  crypto: ixp4xx - don't leak pointers to authenc keys
  crypto: chelsio - don't leak pointers to authenc keys
  crypto: caam/qi - don't leak pointers to authenc keys
  crypto: caam - don't leak pointers to authenc keys
  crypto: lrw - Free rctx->ext with kzfree
  crypto: talitos - fix IPsec cipher in length
  crypto: Deduplicate le32_to_cpu_array() and cpu_to_le32_array()
  crypto: doc - clarify hash callbacks state machine
  crypto: api - Keep failed instances alive
  crypto: api - Make crypto_alg_lookup static
  crypto: api - Remove unused crypto_type lookup function
  crypto: chelsio - Remove declaration of static function from header
  crypto: inside-secure - hmac(sha224) support
  crypto: inside-secure - hmac(sha256) support
  ..

Merge tag 'riscv-for-linus-4.17-mw0' of git://git./linux/kernel/git/palmer/riscv-linux

Pull RISC-V updates from Palmer Dabbelt:
"This contains the new features we'd like to incorporate into the
  RISC-V port for 4.17. We might have a bit more stuff land later in the
  merge window, but I wanted to get this out earlier just so everyone
  can see where we currently stand.

  A short summary of the changes is:

   - We've added support for dynamic ftrace on RISC-V targets.

   - There have been a handful of cleanups to our atomic and locking
     routines. They now more closely match the released RISC-V memory
     model draft.

   - Our module loading support has been cleaned up and is now enabled
     by default, despite some limitations still existing.

   - A patch to define COMMANDLINE_FORCE instead of COMMANDLINE_OVERRIDE
     so the generic device tree code picks up handling all our command
     line stuff.

  There's more information in the merge commits for each patch set"

* tag 'riscv-for-linus-4.17-mw0' of git://git.kernel.org/pub/scm/linux/kernel/git/palmer/riscv-linux: (21 commits)
  RISC-V: Rename CONFIG_CMDLINE_OVERRIDE to CONFIG_CMDLINE_FORCE
  RISC-V: Add definition of relocation types
  RISC-V: Enable module support in defconfig
  RISC-V: Support SUB32 relocation type in kernel module
  RISC-V: Support ADD32 relocation type in kernel module
  RISC-V: Support ALIGN relocation type in kernel module
  RISC-V: Support RVC_BRANCH/JUMP relocation type in kernel modulewq
  RISC-V: Support HI20/LO12_I/LO12_S relocation type in kernel module
  RISC-V: Support CALL relocation type in kernel module
  RISC-V: Support GOT_HI20/CALL_PLT relocation type in kernel module
  RISC-V: Add section of GOT.PLT for kernel module
  RISC-V: Add sections of PLT and GOT for kernel module
  riscv/atomic: Strengthen implementations with fences
  riscv/spinlock: Strengthen implementations with fences
  riscv/barrier: Define __smp_{store_release,load_acquire}
  riscv/ftrace: Add HAVE_FUNCTION_GRAPH_RET_ADDR_PTR support
  riscv/ftrace: Add DYNAMIC_FTRACE_WITH_REGS support
  riscv/ftrace: Add ARCH_SUPPORTS_FTRACE_OPS support
  riscv/ftrace: Add dynamic function graph tracer support
  riscv/ftrace: Add dynamic function tracer support
  ...

Merge tag 'arm64-upstream' of git://git./linux/kernel/git/arm64/linux

Pull arm64 updates from Will Deacon:
"Nothing particularly stands out here, probably because people were
  tied up with spectre/meltdown stuff last time around. Still, the main
  pieces are:

   - Rework of our CPU features framework so that we can whitelist CPUs
     that don't require kpti even in a heterogeneous system

   - Support for the IDC/DIC architecture extensions, which allow us to
     elide instruction and data cache maintenance when writing out
     instructions

   - Removal of the large memory model which resulted in suboptimal
     codegen by the compiler and increased the use of literal pools,
     which could potentially be used as ROP gadgets since they are
     mapped as executable

   - Rework of forced signal delivery so that the siginfo_t is
     well-formed and handling of show_unhandled_signals is consolidated
     and made consistent between different fault types

   - More siginfo cleanup based on the initial patches from Eric
     Biederman

   - Workaround for Cortex-A55 erratum #1024718

   - Some small ACPI IORT updates and cleanups from Lorenzo Pieralisi

   - Misc cleanups and non-critical fixes"

* tag 'arm64-upstream' of git://git.kernel.org/pub/scm/linux/kernel/git/arm64/linux: (70 commits)
  arm64: uaccess: Fix omissions from usercopy whitelist
  arm64: fpsimd: Split cpu field out from struct fpsimd_state
  arm64: tlbflush: avoid writing RES0 bits
  arm64: cmpxchg: Include linux/compiler.h in asm/cmpxchg.h
  arm64: move percpu cmpxchg implementation from cmpxchg.h to percpu.h
  arm64: cmpxchg: Include build_bug.h instead of bug.h for BUILD_BUG
  arm64: lse: Include compiler_types.h and export.h for out-of-line LL/SC
  arm64: fpsimd: include <linux/init.h> in fpsimd.h
  drivers/perf: arm_pmu_platform: do not warn about affinity on uniprocessor
  perf: arm_spe: include linux/vmalloc.h for vmap()
  Revert "arm64: Revert L1_CACHE_SHIFT back to 6 (64-byte cache line size)"
  arm64: cpufeature: Avoid warnings due to unused symbols
  arm64: Add work around for Arm Cortex-A55 Erratum 1024718
  arm64: Delay enabling hardware DBM feature
  arm64: Add MIDR encoding for Arm Cortex-A55 and Cortex-A35
  arm64: capabilities: Handle shared entries
  arm64: capabilities: Add support for checks based on a list of MIDRs
  arm64: Add helpers for checking CPU MIDR against a range
  arm64: capabilities: Clean up midr range helpers
  arm64: capabilities: Change scope of VHE to Boot CPU feature
  ...

Merge branch 'irq-core-for-linus' of git://git./linux/kernel/git/tip/tip

Pull irq updates from Thomas Gleixner:
"The usual pile of boring changes:

   - Consolidate tasklet functions to share code instead of duplicating
     it

   - The first step for making the low level entry handler management on
     multi-platform kernels generic

   - A new sysfs file which allows to retrieve the wakeup state of
     interrupts.

   - Ensure that the interrupt thread follows the effective affinity and
     not the programmed affinity to avoid cross core wakeups.

   - Two new interrupt controller drivers (Microsemi Ocelot and Qualcomm
     PDC)

   - Fix the wakeup path clock handling for Reneasas interrupt chips.

   - Rework the boot time register reset for ARM GIC-V2/3

   - Better suspend/resume support for ARM GIV-V3/ITS

   - Add missing locking to the ARM GIC set_type() callback

   - Small fixes for the irq simulator code

   - SPDX identifiers for the irq core code and removal of boiler plate

   - Small cleanups all over the place"

* 'irq-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (37 commits)
  openrisc: Set CONFIG_MULTI_IRQ_HANDLER
  arm64: Set CONFIG_MULTI_IRQ_HANDLER
  genirq: Make GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER
  irqchip/gic: Take lock when updating irq type
  irqchip/gic: Update supports_deactivate static key to modern api
  irqchip/gic-v3: Ensure GICR_CTLR.EnableLPI=0 is observed before enabling
  irqchip: Add a driver for the Microsemi Ocelot controller
  dt-bindings: interrupt-controller: Add binding for the Microsemi Ocelot interrupt controller
  irqchip/gic-v3: Probe for SCR_EL3 being clear before resetting AP0Rn
  irqchip/gic-v3: Don't try to reset AP0Rn
  irqchip/gic-v3: Do not check trigger configuration of partitionned LPIs
  genirq: Remove license boilerplate/references
  genirq: Add missing SPDX identifiers
  genirq/matrix: Cleanup SPDX identifier
  genirq: Cleanup top of file comments
  genirq: Pass desc to __irq_free instead of irq number
  irqchip/gic-v3: Loudly complain about the use of IRQ_TYPE_NONE
  irqchip/gic: Loudly complain about the use of IRQ_TYPE_NONE
  RISC-V: Move to the new GENERIC_IRQ_MULTI_HANDLER handler
  genirq: Add CONFIG_GENERIC_IRQ_MULTI_HANDLER
  ...

Merge branch 'timers-core-for-linus' of git://git./linux/kernel/git/tip/tip

Pull time(r) updates from Thomas Gleixner:
"A small set of updates for timers and timekeeping:

   - The most interesting change is the consolidation of clock MONOTONIC
     and clock BOOTTIME.

     Clock MONOTONIC behaves now exactly like clock BOOTTIME and does
     not longer ignore the time spent in suspend. A new clock
     MONOTONIC_ACTIVE is provived which behaves like clock MONOTONIC in
     kernels before this change. This allows applications to
     programmatically check for the clock MONOTONIC behaviour.

     As discussed in the review thread, this has the potential of
     breaking user space and we might have to revert this. Knock on wood
     that we can avoid that exercise.

   - Updates to the NTP mechanism to improve accuracy

   - A new kernel internal data structure to aid the ongoing Y2038 work.

   - Cleanups and simplifications of the clocksource code.

   - Make the alarmtimer code play nicely with debugobjects"

* 'timers-core-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  alarmtimer: Init nanosleep alarm timer on stack
  y2038: Introduce struct __kernel_old_timeval
  tracing: Unify the "boot" and "mono" tracing clocks
  hrtimer: Unify MONOTONIC and BOOTTIME clock behavior
  posix-timers: Unify MONOTONIC and BOOTTIME clock behavior
  timekeeping: Remove boot time specific code
  Input: Evdev - unify MONOTONIC and BOOTTIME clock behavior
  timekeeping: Make the MONOTONIC clock behave like the BOOTTIME clock
  timekeeping: Add the new CLOCK_MONOTONIC_ACTIVE clock
  timekeeping/ntp: Determine the multiplier directly from NTP tick length
  timekeeping/ntp: Don't align NTP frequency adjustments to ticks
  clocksource: Use ATTRIBUTE_GROUPS
  clocksource: Use DEVICE_ATTR_RW/RO/WO to define device attributes
  clocksource: Don't walk the clocksource list for empty override

Merge tag 'random_for_linus' of git://git./linux/kernel/git/tytso/random

Pull /dev/random updates from Ted Ts'o:
"A few random (cough, cough) cleanups for the /dev/random driver"

* tag 'random_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/random:
  drivers/char/random.c: remove unused dont_count_entropy
  random: optimize add_interrupt_randomness
  random: always fill buffer in get_random_bytes_wait
  random: use a tighter cap in credit_entropy_bits_safe()

Merge tag 'ext4_for_linus' of git://git./linux/kernel/git/tytso/ext4

Pull ext4 updates from Ted Ts'o:
"Cleanups and bugfixes for ext4, including some fixes to make ext4 more
  robust against maliciously crafted file system images.

  (I still don't recommend that container folks hold any delusions that
  mounting arbitary images that can be crafted by malicious attackers
  should be considered sane thing to do, though!)"

* tag 'ext4_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tytso/ext4: (29 commits)
  ext4: force revalidation of directory pointer after seekdir(2)
  ext4: add extra checks to ext4_xattr_block_get()
  ext4: add bounds checking to ext4_xattr_find_entry()
  ext4: move call to ext4_error() into ext4_xattr_check_block()
  ext4: don't show data=<mode> option if defaulted
  ext4: omit init_itable=n in procfs when disabled
  ext4: show more binary mount options in procfs
  ext4: simplify kobject usage
  ext4: remove unused parameters in sysfs code
  ext4: null out kobject* during sysfs cleanup
  ext4: don't allow r/w mounts if metadata blocks overlap the superblock
  ext4: always initialize the crc32c checksum driver
  ext4: fail ext4_iget for root directory if unallocated
  ext4: limit xattr size to INT_MAX
  ext4: add validity checks for bitmap block numbers
  ext4: fix comments in ext4_swap_extents()
  ext4: use generic_writepages instead of __writepage/write_cache_pages
  ext4: don't complain about incorrect features when probing
  ext4: remove EXT4_STATE_DIOREAD_LOCK flag
  ext4: fix offset overflow on 32-bit archs in ext4_iomap_begin()
  ...

Merge tag '4.17-SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6

Pull cifs updates from Steve French:
"Includes SMB3.11 security improvements, as well as various fixes for
  stable and some debugging improvements"

* tag '4.17-SMB3-Fixes' of git://git.samba.org/sfrench/cifs-2.6:
  cifs: Add minor debug message during negprot
  smb3: Fix root directory when server returns inode number of zero
  cifs: fix sparse warning on previous patch in a few printks
  cifs: add server->vals->header_preamble_size
  cifs: smbd: disconnect transport on RDMA errors
  cifs: smbd: avoid reconnect lockup
  Don't log confusing message on reconnect by default
  Don't log expected error on DFS referral request
  fs: cifs: Replace _free_xid call in cifs_root_iget function
  SMB3.1.1 dialect is no longer experimental
  Tree connect for SMB3.1.1 must be signed for non-encrypted shares
  fix smb3-encryption breakage when CONFIG_DEBUG_SG=y
  CIFS: fix sha512 check in cifs_crypto_secmech_release
  CIFS: implement v3.11 preauth integrity
  CIFS: add sha512 secmech
  CIFS: refactor crypto shash/sdesc allocation&free
  Update README file for cifs.ko
  Update TODO list for cifs.ko
  cifs: fix memory leak in SMB2_open()
  CIFS: SMBD: fix spelling mistake: "faield" and "legnth"

Merge tag 'gfs2-4.17.fixes' of git://git./linux/kernel/git/gfs2/linux-gfs2

Pull gfs2 updates from Bob Peterson:
"We've only got nine GFS2 patches for this merge window:

   - report journal recovery times more accurately during journal replay
     (Abhi Das)

   - fix fallocate chunk size (Andreas Gruenbacher)

   - correctly dirty inodes during rename (Andreas Gruenbacher)

   - improve the comment for function gfs2_block_map (Andreas
     Gruenbacher)

   - improve kernel trace point iomap end: The physical block address
     was added (Andreas Gruenbacher)

   - fix a nasty file system corruption bug that surfaced in xfstests
     476 in punch-hole/truncate (Andreas Gruenbacher)

   - fix a problem Christoph Helwig pointed out, namely, that GFS2 was
     misusing the IOMAP_ZERO flag. The zeroing of new blocks was moved
     to the proper fallocate code (Andreas Gruenbacher)

   - declare function gfs2_remove_from_ail as static (Bob Peterson)

   - only set PageChecked for jdata page writes (Bob Peterson)"

* tag 'gfs2-4.17.fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/gfs2/linux-gfs2:
  gfs2: time journal recovery steps accurately
  gfs2: Zero out fallocated blocks in fallocate_chunk
  gfs2: Check for the end of metadata in punch_hole
  gfs2: gfs2_iomap_end tracepoint: log block address
  gfs2: Improve gfs2_block_map comment
  GFS2: Only set PageChecked for jdata pages
  GFS2: Make function gfs2_remove_from_ail static
  gfs2: Dirty source inode during rename
  gfs2: Fix fallocate chunk size

Merge tag 'for-4.17-tag' of git://git./linux/kernel/git/kdave/linux

Pull btrfs updates from David Sterba:
"There are a several user visible changes, the rest is mostly invisible
  and continues to clean up the whole code base.

  User visible changes:
   - new mount option nossd_spread (pair for ssd_spread)

   - mount option subvolid will detect junk after the number and fail
     the mount

   - add message after cancelled device replace

   - direct module dependency on libcrc32, removed own crc wrappers

   - removed user space transaction ioctls

   - use lighter locking when reading /proc/self/mounts, RCU instead of
     mutex to avoid unnecessary contention

  Enhancements:
   - skip writeback of last page when truncating file to same size

   - send: do not issue unnecessary truncate operations

   - mount option token specifiers: use %u for unsigned values, more
     validation

   - selftests: more tree block validations

  qgroups:
   - preparatory work for splitting reservation types for data and
     metadata, this should allow for more accurate tracking and fix some
     issues with underflows or do further enhancements

   - split metadata reservations for started and joined transaction so
     they do not get mixed up and are accounted correctly at commit time

   - with the above, it's possible to revert patch that potentially
     deadlocks when trying to make more space by explicitly committing
     when the quota limit is hit

   - fix root item corruption when multiple same source snapshots are
     created with quota enabled

  RAID56:
   - make sure target is identical to source when raid56 rebuild fails
     after dev-replace

   - faster rebuild during scrub, batch by stripes and not
     block-by-block

   - make more use of cached data when rebuilding from a missing device

  Fixes:
   - null pointer deref when device replace target is missing

   - fix fsync after hole punching when using no-holes feature

   - fix lockdep splat when allocating percpu data with wrong GFP flags

  Cleanups, refactoring, core changes:
   - drop redunant parameters from various functions

   - kill and opencode trivial helpers

   - __cold/__exit function annotations

   - dead code removal

   - continued audit and documentation of memory barriers

   - error handling: handle removal from uuid tree

   - error handling: remove handling of impossible condtitons

   - more debugging or error messages

   - updated tracepoints

   - one VLA use removal (and one still left)"

* tag 'for-4.17-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/kdave/linux: (164 commits)
  btrfs: lift errors from add_extent_changeset to the callers
  Btrfs: print error messages when failing to read trees
  btrfs: user proper type for btrfs_mask_flags flags
  btrfs: split dev-replace locking helpers for read and write
  btrfs: remove stale comments about fs_mutex
  btrfs: use RCU in btrfs_show_devname for device list traversal
  btrfs: update barrier in should_cow_block
  btrfs: use lockdep_assert_held for mutexes
  btrfs: use lockdep_assert_held for spinlocks
  btrfs: Validate child tree block's level and first key
  btrfs: tests/qgroup: Fix wrong tree backref level
  Btrfs: fix copy_items() return value when logging an inode
  Btrfs: fix fsync after hole punching when using no-holes feature
  btrfs: use helper to set ulist aux from a qgroup
  Revert "btrfs: qgroups: Retry after commit on getting EDQUOT"
  btrfs: qgroup: Update trace events for metadata reservation
  btrfs: qgroup: Use root::qgroup_meta_rsv_* to record qgroup meta reserved space
  btrfs: delayed-inode: Use new qgroup meta rsv for delayed inode and item
  btrfs: qgroup: Use separate meta reservation type for delalloc
  btrfs: qgroup: Introduce function to convert META_PREALLOC into META_PERTRANS
  ...

Merge tag 'xfs-4.17-merge-1' of git://git./fs/xfs/xfs-linux

Pull xfs updates from Darrick Wong:
"Here's the first round of fixes for XFS for 4.17.

  The biggest new features this time around are the addition of lazytime
  support, further enhancement of the on-disk inode metadata verifiers,
  and a patch to smooth over some of the AGFL padding problems that have
  intermittently plagued users since 4.5. I forsee sending a second pull
  request next week with further bug fixes and speedups in the online
  scrub code and elsewhere.

  This series has been run through a full xfstests run over the weekend
  and through a quick xfstests run against this morning's master, with
  no major failures reported.

  Summary of changes for this release:

   - Various cleanups and code fixes

   - Implement lazytime as a mount option

   - Convert various on-disk metadata checks from asserts to -EFSCORRUPTED

   - Fix accounting problems with the rmap per-ag reservations

   - Refactorings and cleanups for xfs_log_force

   - Various bugfixes for the reflink code

   - Work around v5 AGFL padding problems to prevent fs shutdowns

   - Establish inode fork verifiers to inspect on-disk metadata
     correctness

   - Various online scrub fixes

   - Fix v5 swapext blowing up on deleted inodes"

* tag 'xfs-4.17-merge-1' of git://git.kernel.org/pub/scm/fs/xfs/xfs-linux: (49 commits)
  xfs: do not log/recover swapext extent owner changes for deleted inodes
  xfs: clean up xfs_mount allocation and dynamic initializers
  xfs: remove dead inode version setting code
  xfs: catch inode allocation state mismatch corruption
  xfs: xfs_scrub_iallocbt_xref_rmap_inodes should use xref_set_corrupt
  xfs: flag inode corruption if parent ptr doesn't get us a real inode
  xfs: don't accept inode buffers with suspicious unlinked chains
  xfs: move inode extent size hint validation to libxfs
  xfs: record inode buf errors as a xref error in inobt scrubber
  xfs: remove xfs_buf parameter from inode scrub methods
  xfs: inode scrubber shouldn't bother with raw checks
  xfs: bmap scrubber should do rmap xref with bmap for sparse files
  xfs: refactor inode buffer verifier error logging
  xfs: refactor inode verifier error logging
  xfs: refactor bmap record validation
  xfs: sanity-check the unused space before trying to use it
  xfs: detect agfl count corruption and reset agfl
  xfs: unwind the try_again loop in xfs_log_force
  xfs: refactor xfs_log_force_lsn
  xfs: minor cleanup for xfs_reflink_end_cow
  ...

Merge branch 'work.dcache' of git://git./linux/kernel/git/viro/vfs

Pull vfs dcache updates from Al Viro:
"Part of this is what the trylock loop elimination series has turned
  into, part making d_move() preserve the parent (and thus the path) of
  victim, plus some general cleanups"

* 'work.dcache' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs: (22 commits)
  d_genocide: move export to definition
  fold dentry_lock_for_move() into its sole caller and clean it up
  make non-exchanging __d_move() copy ->d_parent rather than swap them
  oprofilefs: don't oops on allocation failure
  lustre: get rid of pointless casts to struct dentry *
  debugfs_lookup(): switch to lookup_one_len_unlocked()
  fold lookup_real() into __lookup_hash()
  take out orphan externs (empty_string/slash_string)
  split d_path() and friends into a separate file
  dcache.c: trim includes
  fs/dcache: Avoid a try_lock loop in shrink_dentry_list()
  get rid of trylock loop around dentry_kill()
  handle move to LRU in retain_dentry()
  dput(): consolidate the "do we need to retain it?" into an inlined helper
  split the slow part of lock_parent() off
  now lock_parent() can't run into killed dentry
  get rid of trylock loop in locking dentries on shrink list
  d_delete(): get rid of trylock loop
  fs/dcache: Move dentry_kill() below lock_parent()
  fs/dcache: Remove stale comment from dentry_kill()
  ...

netdevsim: remove incorrect __net_initdata annotations

The __net_initdata section cannot currently be used for structures that
get cleaned up in an exitcall using unregister_pernet_operations:

WARNING: vmlinux.o(.text+0x868c34): Section mismatch in reference from the function nsim_devlink_exit() to the (unknown reference) .init.data:(unknown)
The function nsim_devlink_exit() references
the (unknown reference) __initdata (unknown).
This is often because nsim_devlink_exit lacks a __initdata
annotation or the annotation of (unknown) is wrong.
WARNING: vmlinux.o(.text+0x868c64): Section mismatch in reference from the function nsim_devlink_init() to the (unknown reference) .init.data:(unknown)
WARNING: vmlinux.o(.text+0x8692bc): Section mismatch in reference from the function nsim_fib_exit() to the (unknown reference) .init.data:(unknown)
WARNING: vmlinux.o(.text+0x869300): Section mismatch in reference from the function nsim_fib_init() to the (unknown reference) .init.data:(unknown)

As that warning tells us, discarding the structure after a module is
loaded would lead to a undefined behavior when that module is removed.

It might be possible to change that annotation so it has no effect for
loadable modules, but I have not figured out exactly how to do that, and
we want this to be fixed in -rc1.

This just removes the annotations, just like we do for all other such
modules.

Fixes: 37923ed6b8ce ("netdevsim: Add simple FIB resource controller via devlink")
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

sfc: remove ctpio_dmabuf_start from stats

The ctpio_dmabuf_start entry is not actually a stat and shouldn't
be exposed to ethtool.

Fixes: 2c0b6ee837db ("sfc: expose CTPIO stats on NICs that support them")
Signed-off-by: Bert Kenward <bkenward@solarflare.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

inet: frags: fix ip6frag_low_thresh boundary

Giving an integer to proc_doulongvec_minmax() is dangerous on 64bit arches,
since linker might place next to it a non zero value preventing a change
to ip6frag_low_thresh.

ip6frag_low_thresh is not used anymore in the kernel, but we do not
want to prematuraly break user scripts wanting to change it.

Since specifying a minimal value of 0 for proc_doulongvec_minmax()
is moot, let's remove these zero values in all defrag units.

Fixes: 6e00f7dd5e4e ("ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh")
Signed-off-by: Eric Dumazet <edumazet@google.com>
Reported-by: Maciej Żenczykowski <maze@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: Fix namespace violation in tipc_sk_fill_sock_diag

To fetch UID info for socket diagnostics, we determine the
namespace of user context using tipc socket instance. This
may cause namespace violation, as the kernel will remap based
on UID.

We fix this by fetching namespace info using the calling userspace
netlink socket.

Fixes: c30b70deb5f4 (tipc: implement socket diagnostics for AF_TIPC)
Reported-by: syzbot+326e587eff1074657718@syzkaller.appspotmail.com
Acked-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: GhantaKrishnamurthy MohanKrishna <mohan.krishna.ghanta.krishnamurthy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: avoid unneeded atomic operation in ip*_append_data()

After commit 694aba690de0 ("ipv4: factorize sk_wmem_alloc updates
done by __ip_append_data()") and commit 1f4c6eb24029 ("ipv6:
factorize sk_wmem_alloc updates done by __ip6_append_data()"),
when transmitting sub MTU datagram, an addtional, unneeded atomic
operation is performed in ip*_append_data() to update wmem_alloc:
in the above condition the delta is 0.

The above cause small but measurable performance regression in UDP
xmit tput test with packet size below MTU.

This change avoids such overhead updating wmem_alloc only if
wmem_alloc_delta is non zero.

The error path is left intentionally unmodified: it's a slow path
and simplicity is preferred to performances.

Fixes: 694aba690de0 ("ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()")
Fixes: 1f4c6eb24029 ("ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()")
Signed-off-by: Paolo Abeni <pabeni@redhat.com>
Reviewed-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nvmem: disallow modular CONFIG_NVMEM

The new of_get_nvmem_mac_address() helper function causes a link error
with CONFIG_NVMEM=m:

drivers/of/of_net.o: In function `of_get_nvmem_mac_address':
of_net.c:(.text+0x168): undefined reference to `of_nvmem_cell_get'
of_net.c:(.text+0x19c): undefined reference to `nvmem_cell_read'
of_net.c:(.text+0x1a8): undefined reference to `nvmem_cell_put'

I could not come up with a good solution for this, as the code is always
built-in. Using an #if IS_REACHABLE() check around it would solve the
link time issue but then stop it from working in that configuration.
Making of_nvmem_cell_get() an inline function could also solve that, but
seems a bit ugly since it's somewhat larger than most inline functions,
and it would just bring that problem into the callers. Splitting the
function into a separate file might be an alternative.

This uses the big hammer by making CONFIG_NVMEM itself a 'bool' symbol,
which avoids the problem entirely but makes the vmlinux larger for anyone
that might use NVMEM support but doesn't need it built-in otherwise.

Fixes: 9217e566bdee ("of_net: Implement of_get_nvmem_mac_address helper")
Cc: Mike Looijmans <mike.looijmans@topic.nl>
Cc: Florian Fainelli <f.fainelli@gmail.com>
Cc: Andrew Lunn <andrew@lunn.ch>
Cc: David S. Miller <davem@davemloft.net>
Cc: netdev@vger.kernel.org
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Acked-by: Mike Looijmans
Signed-off-by: David S. Miller <davem@davemloft.net>

net: hns3: fix length overflow when CONFIG_ARM64_64K_PAGES

When enable the config item "CONFIG_ARM64_64K_PAGES", the size of PAGE_SIZE
is 65536(64K). But the type of length is u16, it will overflow. So change it
to u32.

Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: use full 40 bits of the NSP buffer address

The NSP default buffer is a piece of NFP memory where additional
command data can be placed. Its format has been copied from
host buffer, but the PCIe selection bits do not make sense in
this case. If those get masked out from a NFP address - writes
to random place in the chip memory may be issued and crash the
device.

Even in the general NSP buffer case, it doesn't make sense to have the
PCIe selection bits there anymore. These are unused at the moment, and
when it becomes necessary, the PCIe selection bits should rather be
moved to another register to utilise more bits for the buffer address.

This has never been an issue because the buffer used to be
allocated in memory with less-than-38-bit-long address but that
is about to change.

Fixes: 1a64821c6af7 ("nfp: add support for service processor access")
Signed-off-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Reviewed-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

lan78xx: Connect phy early

When using wicked with a lan78xx device attached to the system, we
end up with ethtool commands issued on the device before an ifup
got issued. That lead to the following crash:

    Unable to handle kernel NULL pointer dereference at virtual address 0000039c
    pgd = ffff800035b30000
    [0000039c] *pgd=0000000000000000
    Internal error: Oops: 96000004 [#1] SMP
    Modules linked in: [...]
    Supported: Yes
    CPU: 3 PID: 638 Comm: wickedd Tainted: G            E      4.12.14-0-default #1
    Hardware name: raspberrypi rpi/rpi, BIOS 2018.03-rc2 02/21/2018
    task: ffff800035e74180 task.stack: ffff800036718000
    PC is at phy_ethtool_ksettings_get+0x20/0x98
    LR is at lan78xx_get_link_ksettings+0x44/0x60 [lan78xx]
    pc : [<ffff0000086f7f30>] lr : [<ffff000000dcca84>] pstate: 20000005
    sp : ffff80003671bb20
    x29: ffff80003671bb20 x28: ffff800035e74180
    x27: ffff000008912000 x26: 000000000000001d
    x25: 0000000000000124 x24: ffff000008f74d00
    x23: 0000004000114809 x22: 0000000000000000
    x21: ffff80003671bbd0 x20: 0000000000000000
    x19: ffff80003671bbd0 x18: 000000000000040d
    x17: 0000000000000001 x16: 0000000000000000
    x15: 0000000000000000 x14: ffffffffffffffff
    x13: 0000000000000000 x12: 0000000000000020
    x11: 0101010101010101 x10: fefefefefefefeff
    x9 : 7f7f7f7f7f7f7f7f x8 : fefefeff31677364
    x7 : 0000000080808080 x6 : ffff80003671bc9c
    x5 : ffff80003671b9f8 x4 : ffff80002c296190
    x3 : 0000000000000000 x2 : 0000000000000000
    x1 : ffff80003671bbd0 x0 : ffff80003671bc00
    Process wickedd (pid: 638, stack limit = 0xffff800036718000)
    Call trace:
    Exception stack(0xffff80003671b9e0 to 0xffff80003671bb20)
    b9e0: ffff80003671bc00 ffff80003671bbd0 0000000000000000 0000000000000000
    ba00: ffff80002c296190 ffff80003671b9f8 ffff80003671bc9c 0000000080808080
    ba20: fefefeff31677364 7f7f7f7f7f7f7f7f fefefefefefefeff 0101010101010101
    ba40: 0000000000000020 0000000000000000 ffffffffffffffff 0000000000000000
    ba60: 0000000000000000 0000000000000001 000000000000040d ffff80003671bbd0
    ba80: 0000000000000000 ffff80003671bbd0 0000000000000000 0000004000114809
    baa0: ffff000008f74d00 0000000000000124 000000000000001d ffff000008912000
    bac0: ffff800035e74180 ffff80003671bb20 ffff000000dcca84 ffff80003671bb20
    bae0: ffff0000086f7f30 0000000020000005 ffff80002c296000 ffff800035223900
    bb00: 0000ffffffffffff 0000000000000000 ffff80003671bb20 ffff0000086f7f30
    [<ffff0000086f7f30>] phy_ethtool_ksettings_get+0x20/0x98
    [<ffff000000dcca84>] lan78xx_get_link_ksettings+0x44/0x60 [lan78xx]
    [<ffff0000087cbc40>] ethtool_get_settings+0x68/0x210
    [<ffff0000087cc0d4>] dev_ethtool+0x214/0x2180
    [<ffff0000087e5008>] dev_ioctl+0x400/0x630
    [<ffff00000879dd00>] sock_do_ioctl+0x70/0x88
    [<ffff00000879f5f8>] sock_ioctl+0x208/0x368
    [<ffff0000082cde10>] do_vfs_ioctl+0xb0/0x848
    [<ffff0000082ce634>] SyS_ioctl+0x8c/0xa8
    Exception stack(0xffff80003671bec0 to 0xffff80003671c000)
    bec0: 0000000000000009 0000000000008946 0000fffff4e841d0 0000aa0032687465
    bee0: 0000aaaafa2319d4 0000fffff4e841d4 0000000032687465 0000000032687465
    bf00: 000000000000001d 7f7fff7f7f7f7f7f 72606b622e71ff4c 7f7f7f7f7f7f7f7f
    bf20: 0101010101010101 0000000000000020 ffffffffffffffff 0000ffff7f510c68
    bf40: 0000ffff7f6a9d18 0000ffff7f44ce30 000000000000040d 0000ffff7f6f98f0
    bf60: 0000fffff4e842c0 0000000000000001 0000aaaafa2c2e00 0000ffff7f6ab000
    bf80: 0000fffff4e842c0 0000ffff7f62a000 0000aaaafa2b9f20 0000aaaafa2c2e00
    bfa0: 0000fffff4e84818 0000fffff4e841a0 0000ffff7f5ad0cc 0000fffff4e841a0
    bfc0: 0000ffff7f44ce3c 0000000080000000 0000000000000009 000000000000001d
    bfe0: 0000000000000000 0000000000000000 0000000000000000 0000000000000000

The culprit is quite simple: The driver tries to access the phy left and right,
but only actually has a working reference to it when the device is up.

The fix thus is quite simple too: Get a reference to the phy on probe already
and keep it even when the device is going down.

With this patch applied, I can successfully run wicked on my system and bring
the interface up and down as many times as I want, without getting NULL pointer
dereferences in between.

Signed-off-by: Alexander Graf <agraf@suse.de>
Signed-off-by: David S. Miller <davem@davemloft.net>

nfp: add a separate counter for packets with CHECKSUM_COMPLETE

We are currently counting packets with CHECKSUM_COMPLETE as
"hw_rx_csum_ok". This is confusing. Add a new counter.
To make sure it fits in the same cacheline move the less used
error counter to a different location.

Signed-off-by: Jakub Kicinski <jakub.kicinski@netronome.com>
Reviewed-by: Dirk van der Merwe <dirk.vandermerwe@netronome.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

tipc: Fix missing list initializations in struct tipc_subscription

When an item of struct tipc_subscription is created, we fail to
initialize the two lists aggregated into the struct. This has so far
never been a problem, since the items are just added to a root
object by list_add(), which does not require the addee list to be
pre-initialized. However, syzbot is provoking situations where this
addition fails, whereupon the attempted removal if the item from
the list causes a crash.

This problem seems to always have been around, despite that the code
for creating this object was rewritten in commit 242e82cc95f6 ("tipc:
collapse subscription creation functions"), which is still in net-next.

We fix this for that commit by initializing the two lists properly.

Fixes: 242e82cc95f6 ("tipc: collapse subscription creation functions")
Reported-by: syzbot+0bb443b74ce09197e970@syzkaller.appspotmail.com
Signed-off-by: Jon Maloy <jon.maloy@ericsson.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'ipv6-udp-set-dst-cache-for-a-connected-sk-if-current-not-valid'

Alexey Kodanev says:

====================
ipv6: udp: set dst cache for a connected sk if current not valid

A new RTF_CACHE route can be created with the socket's dst cache
update between the below calls in udpv6_sendmsg(), when datagram
sending results to ICMPV6_PKT_TOOBIG error:

   dst = ip6_sk_dst_lookup_flow(...)
   ...
release_dst:
    if (dst) {
        if (connected) {
            ip6_dst_store(sk, dst)

Therefore, the new socket's dst cache reset to the old one on
"release_dst:".

The first three patches prepare the code to store dst cache
with ip6_sk_dst_lookup_flow():

  * the first patch adds ip6_sk_dst_store_flow() function with
    commonly used source and destiantion addresses checks using
    the flow information.

  * the second patch adds a new argument to ip6_sk_dst_lookup_flow()
    and ability to store dst in the socket's cache. Also, the two
    users of the function are updated without enabling the new
    behavior: pingv6_sendmsg() and udpv6_sendmsg().

  * the third patch makes 'connected' variable in udpv6_sendmsg()
    to be consistent with ip6_sk_dst_store_flow(), changes its type
    from int to bool.

The last patch contains the actual fix that removes sk dst cache
update in the end of udpv6_sendmsg(), and allows to do it in
ip6_sk_dst_lookup_flow().

v6: * use bool type for a new parameter in ip_sk_dst_lookup_flow()
    * add one more patch to convert 'connected' variable in
      udpv6_sendmsg() from int to bool type. If it shouldn't be
      here I will resend it when the net-next is opened.

v5: * relocate ip6_sk_dst_store_flow() to net/ipv6/route.c and
      rename ip6_dst_store_flow() to ip6_sk_dst_store_flow() as
      suggested by Martin

v4: * fix the error in the build of ip_dst_store_flow() reported by
      kbuild test robot due to missing checks for CONFIG_IPV6: add
      new function to ip6_output.c instead of ip6_route.h
    * add 'const' to struct flowi6 in ip6_dst_store_flow()
    * minor commit messages fixes

v3: * instead of moving ip6_dst_store() above udp_v6_send_skb(),
      update socket's dst cache inside ip6_sk_dst_lookup_flow()
      if the current one is invalid
    * the issue not reproduced in 4.1, but starting from 4.2. Add
      one more 'Fixes:' commit that creates new RTF_CACHE route.
      Though, it is also mentioned in the first one
====================

Acked-by: Martin KaFai Lau <kafai@fb.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: udp: set dst cache for a connected sk if current not valid

A new RTF_CACHE route can be created between ip6_sk_dst_lookup_flow()
and ip6_dst_store() calls in udpv6_sendmsg(), when datagram sending
results to ICMPV6_PKT_TOOBIG error:

    udp_v6_send_skb(), for example with vti6 tunnel:
        vti6_xmit(), get ICMPV6_PKT_TOOBIG error
            skb_dst_update_pmtu(), can create a RTF_CACHE clone
            icmpv6_send()
    ...
    udpv6_err()
        ip6_sk_update_pmtu()
           ip6_update_pmtu(), can create a RTF_CACHE clone
           ...
           ip6_datagram_dst_update()
                ip6_dst_store()

And after commit 33c162a980fe ("ipv6: datagram: Update dst cache of
a connected datagram sk during pmtu update"), the UDPv6 error handler
can update socket's dst cache, but it can happen before the update in
the end of udpv6_sendmsg(), preventing getting the new dst cache on
the next udpv6_sendmsg() calls.

In order to fix it, save dst in a connected socket only if the current
socket's dst cache is invalid.

The previous patch prepared ip6_sk_dst_lookup_flow() to do that with
the new argument, and this patch enables it in udpv6_sendmsg().

Fixes: 33c162a980fe ("ipv6: datagram: Update dst cache of a connected datagram sk during pmtu update")
Fixes: 45e4fd26683c ("ipv6: Only create RTF_CACHE routes after encountering pmtu exception")
Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: udp: convert 'connected' to bool type in udpv6_sendmsg()

This should make it consistent with ip6_sk_dst_lookup_flow()
that is accepting the new 'connected' parameter of type bool.

Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: allow to cache dst for a connected sk in ip6_sk_dst_lookup_flow()

Add 'connected' parameter to ip6_sk_dst_lookup_flow() and update
the cache only if ip6_sk_dst_check() returns NULL and a socket
is connected.

The function is used as before, the new behavior for UDP sockets
in udpv6_sendmsg() will be enabled in the next patch.

Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

ipv6: add a wrapper for ip6_dst_store() with flowi6 checks

Move commonly used pattern of ip6_dst_store() usage to a separate
function - ip6_sk_dst_store_flow(), which will check the addresses
for equality using the flow information, before saving them.

There is no functional changes in this patch. In addition, it will
be used in the next patch, in ip6_sk_dst_lookup_flow().

Signed-off-by: Alexey Kodanev <alexey.kodanev@oracle.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: phy: marvell10g: add thermal hwmon device

Add a thermal monitoring device for the Marvell 88x3310, which updates
once a second. We also need to hook into the suspend/resume mechanism
to ensure that the thermal monitoring is reconfigured when we resume.

Suggested-by: Andrew Lunn <andrew@lunn.ch>
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
Signed-off-by: David S. Miller <davem@davemloft.net>

pptp: remove a buggy dst release in pptp_connect()

Once dst has been cached in socket via sk_setup_caps(),
it is illegal to call ip_rt_put() (or dst_release()),
since sk_setup_caps() did not change dst refcount.

We can still dereference it since we hold socket lock.

Caugth by syzbot :

BUG: KASAN: use-after-free in atomic_dec_return include/asm-generic/atomic-instrumented.h:198 [inline]
BUG: KASAN: use-after-free in dst_release+0x27/0xa0 net/core/dst.c:185
Write of size 4 at addr ffff8801c54dc040 by task syz-executor4/20088

CPU: 1 PID: 20088 Comm: syz-executor4 Not tainted 4.16.0+ #376
Hardware name: Google Google Compute Engine/Google Compute Engine, BIOS Google 01/01/2011
Call Trace:
__dump_stack lib/dump_stack.c:17 [inline]
dump_stack+0x1a7/0x27d lib/dump_stack.c:53
print_address_description+0x73/0x250 mm/kasan/report.c:256
kasan_report_error mm/kasan/report.c:354 [inline]
kasan_report+0x23c/0x360 mm/kasan/report.c:412
check_memory_region_inline mm/kasan/kasan.c:260 [inline]
check_memory_region+0x137/0x190 mm/kasan/kasan.c:267
kasan_check_write+0x14/0x20 mm/kasan/kasan.c:278
atomic_dec_return include/asm-generic/atomic-instrumented.h:198 [inline]
dst_release+0x27/0xa0 net/core/dst.c:185
sk_dst_set include/net/sock.h:1812 [inline]
sk_dst_reset include/net/sock.h:1824 [inline]
sock_setbindtodevice net/core/sock.c:610 [inline]
sock_setsockopt+0x431/0x1b20 net/core/sock.c:707
SYSC_setsockopt net/socket.c:1845 [inline]
SyS_setsockopt+0x2ff/0x360 net/socket.c:1828
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7
RIP: 0033:0x4552d9
RSP: 002b:00007f4878126c68 EFLAGS: 00000246 ORIG_RAX: 0000000000000036
RAX: ffffffffffffffda RBX: 00007f48781276d4 RCX: 00000000004552d9
RDX: 0000000000000019 RSI: 0000000000000001 RDI: 0000000000000013
RBP: 000000000072bea0 R08: 0000000000000010 R09: 0000000000000000
R10: 00000000200010c0 R11: 0000000000000246 R12: 00000000ffffffff
R13: 0000000000000526 R14: 00000000006fac30 R15: 0000000000000000

Allocated by task 20088:
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
kasan_kmalloc+0xad/0xe0 mm/kasan/kasan.c:552
kasan_slab_alloc+0x12/0x20 mm/kasan/kasan.c:489
kmem_cache_alloc+0x12e/0x760 mm/slab.c:3542
dst_alloc+0x11f/0x1a0 net/core/dst.c:104
rt_dst_alloc+0xe9/0x540 net/ipv4/route.c:1520
__mkroute_output net/ipv4/route.c:2265 [inline]
ip_route_output_key_hash_rcu+0xa49/0x2c60 net/ipv4/route.c:2493
ip_route_output_key_hash+0x20b/0x370 net/ipv4/route.c:2322
__ip_route_output_key include/net/route.h:126 [inline]
ip_route_output_flow+0x26/0xa0 net/ipv4/route.c:2577
ip_route_output_ports include/net/route.h:163 [inline]
pptp_connect+0xa84/0x1170 drivers/net/ppp/pptp.c:453
SYSC_connect+0x213/0x4a0 net/socket.c:1639
SyS_connect+0x24/0x30 net/socket.c:1620
do_syscall_64+0x281/0x940 arch/x86/entry/common.c:287
entry_SYSCALL_64_after_hwframe+0x42/0xb7

Freed by task 20082:
save_stack+0x43/0xd0 mm/kasan/kasan.c:447
set_track mm/kasan/kasan.c:459 [inline]
__kasan_slab_free+0x11a/0x170 mm/kasan/kasan.c:520
kasan_slab_free+0xe/0x10 mm/kasan/kasan.c:527
__cache_free mm/slab.c:3486 [inline]
kmem_cache_free+0x83/0x2a0 mm/slab.c:3744
dst_destroy+0x266/0x380 net/core/dst.c:140
dst_destroy_rcu+0x16/0x20 net/core/dst.c:153
__rcu_reclaim kernel/rcu/rcu.h:178 [inline]
rcu_do_batch kernel/rcu/tree.c:2675 [inline]
invoke_rcu_callbacks kernel/rcu/tree.c:2930 [inline]
__rcu_process_callbacks kernel/rcu/tree.c:2897 [inline]
rcu_process_callbacks+0xd6c/0x17b0 kernel/rcu/tree.c:2914
__do_softirq+0x2d7/0xb85 kernel/softirq.c:285

The buggy address belongs to the object at ffff8801c54dc000
which belongs to the cache ip_dst_cache of size 168
The buggy address is located 64 bytes inside of
168-byte region [ffff8801c54dc000, ffff8801c54dc0a8)
The buggy address belongs to the page:
page:ffffea0007153700 count:1 mapcount:0 mapping:ffff8801c54dc000 index:0x0
flags: 0x2fffc0000000100(slab)
raw: 02fffc0000000100 ffff8801c54dc000 0000000000000000 0000000100000010
raw: ffffea0006b34b20 ffffea0006b6c1e0 ffff8801d674a1c0 0000000000000000
page dumped because: kasan: bad access detected

Signed-off-by: Eric Dumazet <edumazet@google.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: mt7530: Use NULL instead of plain integer

We would be passing 0 instead of NULL as the rsp argument to
mt7530_fdb_cmd(), fix that.

Fixes: b8f126a8d543 ("net-next: dsa: add dsa support for Mediatek MT7530 switch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Acked-by: Sean Wang <sean.wang@mediatek.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: dsa: b53: Fix sparse warnings in b53_mmap.c

sparse complains about the following warnings:

drivers/net/dsa/b53/b53_mmap.c:33:31: warning: incorrect type in
initializer (different address spaces)
drivers/net/dsa/b53/b53_mmap.c:33:31: expected unsigned char
[noderef] [usertype] <asn:2>*regs
drivers/net/dsa/b53/b53_mmap.c:33:31: got void *priv

and indeed, while what we are doing is functional, we are dereferencing
a void * pointer into a void __iomem * which is not great. Just use the
defined b53_mmap_priv structure which holds our register base and use
that.

Fixes: 967dd82ffc52 ("net: dsa: b53: Add support for Broadcom RoboSwitch")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

af_unix: remove redundant lockdep class

After commit 581319c58600 ("net/socket: use per af lockdep classes for sk queues")
sock queue locks now have per-af lockdep classes, including unix socket.
It is no longer necessary to workaround it.

I noticed this while looking at a syzbot deadlock report, this patch
itself doesn't fix it (this is why I don't add Reported-by).

Fixes: 581319c58600 ("net/socket: use per af lockdep classes for sk queues")
Cc: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: Cong Wang <xiyou.wangcong@gmail.com>
Acked-by: Paolo Abeni <pabeni@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

Merge branch 'net-Broadcom-drivers-sparse-fixes'

Florian Fainelli says:

====================
net: Broadcom drivers sparse fixes

This patch series fixes the same warning reported by sparse in bcmsysport and
bcmgenet in the code that deals with inserting the TX checksum pointers:

drivers/net/ethernet/broadcom/bcmsysport.c:1155:26: warning: cast from restricted __be16
drivers/net/ethernet/broadcom/bcmsysport.c:1155:26: warning: incorrect type in argument 1 (different base types)
drivers/net/ethernet/broadcom/bcmsysport.c:1155:26: expected unsigned short [unsigned] [usertype] val
drivers/net/ethernet/broadcom/bcmsysport.c:1155:26: got restricted __be16 [usertype] protocol

This patch fixes both issues by using the same construct and not swapping
skb->protocol but instead the values we are checking against.
====================

Signed-off-by: David S. Miller <davem@davemloft.net>

net: systemport: Fix sparse warnings in bcm_sysport_insert_tsb()

skb->protocol is a __be16 which we would be calling htons() against,
while this is not wrong per-se as it correctly results in swapping the
value on LE hosts, this still upsets sparse. Adopt a similar pattern to
what other drivers do and just assign ip_ver to skb->protocol, and then
use htons() against the different constants such that the compiler can
resolve the values at build time.

Fixes: 80105befdb4b ("net: systemport: add Broadcom SYSTEMPORT Ethernet MAC driver")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

net: bcmgenet: Fix sparse warnings in bcmgenet_put_tx_csum()

skb->protocol is a __be16 which we would be calling htons() against,
while this is not wrong per-se as it correctly results in swapping the
value on LE hosts, this still upsets sparse. Adopt a similar pattern to
what other drivers do and just assign ip_ver to skb->protocol, and then
use htons() against the different constants such that the compiler can
resolve the values at build time.

Fixes: 1c1008c793fa ("net: bcmgenet: add main driver file")
Signed-off-by: Florian Fainelli <f.fainelli@gmail.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

rxrpc: Fix undefined packet handling

By analogy with other Rx implementations, RxRPC packet types 9, 10 and 11
should just be discarded rather than being aborted like other undefined
packet types.

Reported-by: Jeffrey Altman <jaltman@auristor.com>
Signed-off-by: David Howells <dhowells@redhat.com>
Signed-off-by: David S. Miller <davem@davemloft.net>

openrisc: Set CONFIG_MULTI_IRQ_HANDLER

arm has an optional MULTI_IRQ_HANDLER, which openrisc copied but didn't
make optional. The multi irq handler infrastructure has been copied to
generic code selectable with a new config symbol. That symbol can be
selected by randconfig builds and can cause build breakage.

Introduce CONFIG_MULTI_IRQ_HANDLER as an intermediate step which prevents
the core config symbol from being selected. The openrisc local config
symbol will be removed once openrisc gets converted to the generic code.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20180404043130.31277-3-palmer@sifive.com

arm64: Set CONFIG_MULTI_IRQ_HANDLER

arm has an optional MULTI_IRQ_HANDLER, which arm64 copied but didn't make
optional. The multi irq handler infrastructure has been copied to generic
code selectable with a new config symbol. That symbol can be selected by
randconfig builds and can cause build breakage.

Introduce CONFIG_MULTI_IRQ_HANDLER as an intermediate step which prevents
the core config symbol from being selected. The arm64 local config symbol
will be removed once arm64 gets converted to the generic code.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20180404043130.31277-2-palmer@sifive.com

genirq: Make GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER

These config switches enable the same code in the core and the not yet
converted architecture code. They can be selected both by randconfig builds
and cause linker error because the same symbols are defined twice.

Make the new GENERIC_IRQ_MULTI_HANDLER depend on !MULTI_IRQ_HANDLER to
prevent that. The dependency will be removed once all architectures are
converted over.

Signed-off-by: Palmer Dabbelt <palmer@sifive.com>
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Arnd Bergmann <arnd@arndb.de>
Link: https://lkml.kernel.org/r/20180404043130.31277-4-palmer@sifive.com

Merge branch 'old.dcache' into work.dcache

Merge branch 'userns-linus' of git://git./linux/kernel/git/ebiederm/user-namespace

Pull namespace updates from Eric Biederman:
"There was a lot of work this cycle fixing bugs that were discovered
  after the merge window and getting everything ready where we can
  reasonably support fully unprivileged fuse. The bug fixes you already
  have and much of the unprivileged fuse work is coming in via other
  trees.

  Still left for fully unprivileged fuse is figuring out how to cleanly
  handle .set_acl and .get_acl in the legacy case, and properly handling
  of evm xattrs on unprivileged mounts.

  Included in the tree is a cleanup from Alexely that replaced a linked
  list with a statically allocated fix sized array for the pid caches,
  which simplifies and speeds things up.

  Then there is are some cleanups and fixes for the ipc namespace. The
  motivation was that in reviewing other code it was discovered that
  access ipc objects from different pid namespaces recorded pids in such
  a way that when asked the wrong pids were returned. In the worst case
  there has been a measured 30% performance impact for sysvipc
  semaphores. Other test cases showed no measurable performance impact.
  Manfred Spraul and Davidlohr Bueso who tend to work on sysvipc
  performance both gave the nod that this is good enough.

  Casey Schaufler and James Morris have given their approval to the LSM
  side of the changes.

  I simplified the types and the code dealing with sysvipc to pass just
  kern_ipc_perm for all three types of ipc. Which reduced the header
  dependencies throughout the kernel and simplified the lsm code.

  Which let me work on the pid fixes without having to worry about
  trivial changes causing complete kernel recompiles"

* 'userns-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/ebiederm/user-namespace:
  ipc/shm: Fix pid freeing.
  ipc/shm: fix up for struct file no longer being available in shm.h
  ipc/smack: Tidy up from the change in type of the ipc security hooks
  ipc: Directly call the security hook in ipc_ops.associate
  ipc/sem: Fix semctl(..., GETPID, ...) between pid namespaces
  ipc/msg: Fix msgctl(..., IPC_STAT, ...) between pid namespaces
  ipc/shm: Fix shmctl(..., IPC_STAT, ...) between pid namespaces.
  ipc/util: Helpers for making the sysvipc operations pid namespace aware
  ipc: Move IPCMNI from include/ipc.h into ipc/util.h
  msg: Move struct msg_queue into ipc/msg.c
  shm: Move struct shmid_kernel into ipc/shm.c
  sem: Move struct sem and struct sem_array into ipc/sem.c
  msg/security: Pass kern_ipc_perm not msg_queue into the msg_queue security hooks
  shm/security: Pass kern_ipc_perm not shmid_kernel into the shm security hooks
  sem/security: Pass kern_ipc_perm not sem_array into the sem security hooks
  pidns: simpler allocation of pid_* caches

Merge branch 'for-4.17' of git://git./linux/kernel/git/tj/wq

Pull workqueue updates from Tejun Heo:
"rcu_work addition and a couple trivial changes"

* 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/wq:
  workqueue: remove the comment about the old manager_arb mutex
  workqueue: fix the comments of nr_idle
  fs/aio: Use rcu_work instead of explicit rcu and work item
  cgroup: Use rcu_work instead of explicit rcu and work item
  RCU, workqueue: Implement rcu_work

Merge branch 'for-4.17' of git://git./linux/kernel/git/tj/libata

Pull libata updates from Tejun Heo:
"Nothing too interesting.

  The biggest change is refcnting fix for ata_host - the bug is recent
  and can only be triggered on controller hotplug, so very few are
  hitting it.

  There also are a number of trivial license / error message changes and
  some hardware specific changes"

* 'for-4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/tj/libata: (23 commits)
  ahci: imx: add the imx8qm ahci sata support
  libata: ensure host is free'd on error exit paths
  ata: ahci-platform: add reset control support
  ahci: imx: fix the build warning
  ata: add Amiga Gayle PATA controller driver
  ahci: imx: add the imx6qp ahci sata support
  ata: change Tegra124 to Tegra
  ata: ahci_tegra: Add AHCI support for Tegra210
  ata: ahci_tegra: disable DIPM
  ata: ahci_tegra: disable devslp for Tegra124
  ata: ahci_tegra: initialize regulators from soc struct
  ata: ahci_tegra: Update initialization sequence
  dt-bindings: Tegra210: add binding documentation
  libata: add refcounting to ata_host
  pata_bk3710: clarify license version and use SPDX header
  pata_falcon: clarify license version and use SPDX header
  pata_it821x: Delete an error message for a failed memory allocation in it821x_firmware_command()
  pata_macio: Delete an error message for a failed memory allocation in two functions
  pata_mpc52xx: Delete an error message for a failed memory allocation in mpc52xx_ata_probe()
  sata_dwc_460ex: Delete an error message for a failed memory allocation in sata_dwc_port_start()
  ...

Merge tag 'media/v4.17-1' of git://git./linux/kernel/git/mchehab/linux-media

Pull media updates from Mauro Carvalho Chehab:

- new CEC pin injection code for testing purposes

- DVB frontend cxd2099 promoted from staging

- new platform driver for Sony cxd2880 DVB devices

- new sensor drivers: mt9t112, ov2685, ov5695, ov772x, tda1997x,
   tw9910.c

- removal of unused cx18 and ivtv alsa mixers

- the reneseas-ceu driver doesn't depend on soc_camera anymore and
   moved from staging

- removed the mantis_vp3028 driver, unused since 2009

- s5p-mfc: add support for version 10 of the MSP

- added a decoder for imon protocol

- atomisp: lots of cleanups

- imx074 and mt9t031: don't depend on soc_camera anymore, being
   promoted from staging

- added helper functions to better support DVB I2C binding

- lots of driver improvements and cleanups

* tag 'media/v4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: (438 commits)
  media: v4l2-ioctl: rename a temp var that stores _IOC_SIZE(cmd)
  media: fimc-capture: get rid of two warnings
  media: dvb-usb-v2: fix a missing dependency of I2C_MUX
  media: uvc: to the right check at uvc_ioctl_enum_framesizes()
  media: cec-core: fix a bug at cec_error_inj_write()
  media: tda9840: cleanup a warning
  media: tm6000:  avoid casting just to print pointer address
  media: em28xx-input: improve error handling code
  media: zr364xx: avoid casting just to print pointer address
  media: vivid-radio-rx: add a cast to avoid a warning
  media: saa7134-alsa: don't use casts to print a buffer address
  media: solo6x10: get rid of an address space warning
  media: zoran: don't cast pointers to print them
  media: ir-kbd-i2c: change the if logic to avoid a warning
  media: ir-kbd-i2c: improve error handling code
  media: saa7134-input: improve error handling
  media: s2255drv: fix a casting warning
  media: ivtvfb: Cleanup some warnings
  media: videobuf-dma-sg: Fix a weird cast
  soc_camera: fix a weird cast on printk
  ...

Merge tag 'kconfig-v4.17' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kconfig updates from Masahiro Yamada:

- improve checkpatch for more precise Kconfig code checking

- clarify effective selects by grouping reverse dependencies in help

- do not write out '# CONFIG_FOO is not set' from invisible symbols

- make oldconfig as silent as it should be

- rename 'silentoldconfig' to 'syncconfig'

- add unit-test framework and several test cases

- warn unmet dependency of tristate symbols

- make unmet dependency warnings readable, removing false positives

- improve recursive include detection

- use yylineno to simplify the line number tracking

- misc cleanups

* tag 'kconfig-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (30 commits)
  kconfig: use yylineno option instead of manual lineno increments
  kconfig: detect recursive inclusion earlier
  kconfig: remove duplicated file name and lineno of recursive inclusion
  kconfig: do not include both curses.h and ncurses.h for nconfig
  kconfig: make unmet dependency warnings readable
  kconfig: warn unmet direct dependency of tristate symbols selected by y
  kconfig: tests: test if recursive inclusion is detected
  kconfig: tests: test if recursive dependencies are detected
  kconfig: tests: test randconfig for choice in choice
  kconfig: tests: test defconfig when two choices interact
  kconfig: tests: check visibility of tristate choice values in y choice
  kconfig: tests: check unneeded "is not set" with unmet dependency
  kconfig: tests: test if new symbols in choice are asked
  kconfig: tests: test automatic submenu creation
  kconfig: tests: add basic choice tests
  kconfig: tests: add framework for Kconfig unit testing
  kbuild: add PYTHON2 and PYTHON3 variables
  kconfig: remove redundant streamline_config.pl prerequisite
  kconfig: rename silentoldconfig to syncconfig
  kconfig: invoke oldconfig instead of silentoldconfig from local*config
  ...

Merge tag 'kbuild-v4.17' of git://git./linux/kernel/git/masahiroy/linux-kbuild

Pull Kbuild updates from Masahiro Yamada:

- add a shell script to get Clang version

- improve portability of build scripts

- drop always-enabled CONFIG_THIN_ARCHIVE and remove unused code

- rename built-in.o which is now thin archive to built-in.a

- process clean/build targets one by one to get along with -j option

- simplify ld-option

- improve building with CONFIG_TRIM_UNUSED_KSYMS

- define KBUILD_MODNAME even for objects shared among multiple modules

- avoid linking multiple instances of same objects from composite
   objects

- move <linux/compiler_types.h> to c_flags to include it only for C
   files

- clean-up various Makefiles

* tag 'kbuild-v4.17' of git://git.kernel.org/pub/scm/linux/kernel/git/masahiroy/linux-kbuild: (29 commits)
  kbuild: get <linux/compiler_types.h> out of <linux/kconfig.h>
  kbuild: clean up link rule of composite modules
  kbuild: clean up archive rule of built-in.a
  kbuild: remove partial section mismatch detection for built-in.a
  net: liquidio: clean up Makefile for simpler composite object handling
  lib: zstd: clean up Makefile for simpler composite object handling
  kbuild: link $(real-obj-y) instead of $(obj-y) into built-in.a
  kbuild: rename real-objs-y/m to real-obj-y/m
  kbuild: move modname and modname-multi close to modname_flags
  kbuild: simplify modname calculation
  kbuild: fix modname for composite modules
  kbuild: define KBUILD_MODNAME even if multiple modules share objects
  kbuild: remove unnecessary $(subst $(obj)/, , ...) in modname-multi
  kbuild: Use ls(1) instead of stat(1) to obtain file size
  kbuild: link vmlinux only once for CONFIG_TRIM_UNUSED_KSYMS
  kbuild: move include/config/ksym/* to include/ksym/*
  kbuild: move CONFIG_TRIM_UNUSED_KSYMS code unneeded for external module
  kbuild: restore autoksyms.h touch to the top Makefile
  kbuild: move 'scripts' target below
  kbuild: remove wrong 'touch' in adjust_autoksyms.sh
  ...

Merge branch 'parisc-4.17-1' of git://git./linux/kernel/git/deller/parisc-linux

Pull parisc updates from Helge Deller:
"Lots of small enhancements and fixes in this patchset:

   - improved the x86-64 compatibility for PCI cards by returning -1UL
     for timed out MMIO transactions (instead of crashing)

   - fixed HPMC handler for PAT machines: size needs to be multiple of 16

   - prepare machine_power_off() to be able to turn rp3410 and c8000
     machines off via IMPI

   - added code to extract machine info for usage with qemu

   - some init sections fixes

   - lots of fixes for sparse-, ubsan- and uninitalized variables
     warnings"

* 'parisc-4.17-1' of git://git.kernel.org/pub/scm/linux/kernel/git/deller/parisc-linux:
  parisc: Fix out of array access in match_pci_device()
  parisc: Add code generator for Qemu/SeaBIOS machine info
  parisc/pci: Switch LBA PCI bus from Hard Fail to Soft Fail mode
  parisc: Fix HPMC handler by increasing size to multiple of 16 bytes
  parisc: Directly call machine_power_off() in power button driver
  parisc: machine_power_off() should call pm_power_off()
  parisc/Kconfig: SMP kernels boot on all machines
  parisc: Silence uninitialized variable warning in dbl_to_sgl_fcnvff()
  parisc: Move various functions and strings to init section
  parisc: Convert MAP_TYPE to cover 4 bits on parisc
  parisc: Force to various endian types for sparse
  parisc/gscps2: Fix sparse warnings
  parisc/led: Fix sparse warnings
  parisc/parport_gsc: Use NULL to avoid sparse warning
  parisc/stifb: Use fb_memset() to avoid sparse warning

Merge git://git./linux/kernel/git/davem/sparc-next

Pull sparc updates from David Miller:

1) Add support for ADI (Application Data Integrity) found in more
    recent sparc64 cpus. Essentially this is keyed based access to
    virtual memory, and if the key encoded in the virual address is
    wrong you get a trap.

    The mm changes were reviewed by Andrew Morton and others.

    Work by Khalid Aziz.

2) Validate DAX completion index range properly, from Rob Gardner.

3) Add proper Kconfig deps for DAX driver. From Guenter Roeck.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
  sparc64: Make atomic_xchg() an inline function rather than a macro.
  sparc64: Properly range check DAX completion index
  sparc: Make auxiliary vectors for ADI available on 32-bit as well
  sparc64: Oracle DAX driver depends on SPARC64
  sparc64: Update signal delivery to use new helper functions
  sparc64: Add support for ADI (Application Data Integrity)
  mm: Allow arch code to override copy_highpage()
  mm: Clear arch specific VM flags on protection change
  mm: Add address parameter to arch_validate_prot()
  sparc64: Add auxiliary vectors to report platform ADI properties
  sparc64: Add handler for "Memory Corruption Detected" trap
  sparc64: Add HV fault type handlers for ADI related faults
  sparc64: Add support for ADI register fields, ASIs and traps
  mm, swap: Add infrastructure for saving page metadata on swap
  signals, sparc: Add signal codes for ADI violations

Merge git://git./linux/kernel/git/davem/net-next

Pull networking updates from David Miller:

1) Support offloading wireless authentication to userspace via
    NL80211_CMD_EXTERNAL_AUTH, from Srinivas Dasari.

2) A lot of work on network namespace setup/teardown from Kirill Tkhai.
    Setup and cleanup of namespaces now all run asynchronously and thus
    performance is significantly increased.

3) Add rx/tx timestamping support to mv88e6xxx driver, from Brandon
    Streiff.

4) Support zerocopy on RDS sockets, from Sowmini Varadhan.

5) Use denser instruction encoding in x86 eBPF JIT, from Daniel
    Borkmann.

6) Support hw offload of vlan filtering in mvpp2 dreiver, from Maxime
    Chevallier.

7) Support grafting of child qdiscs in mlxsw driver, from Nogah
    Frankel.

8) Add packet forwarding tests to selftests, from Ido Schimmel.

9) Deal with sub-optimal GSO packets better in BBR congestion control,
    from Eric Dumazet.

10) Support 5-tuple hashing in ipv6 multipath routing, from David Ahern.

11) Add path MTU tests to selftests, from Stefano Brivio.

12) Various bits of IPSEC offloading support for mlx5, from Aviad
    Yehezkel, Yossi Kuperman, and Saeed Mahameed.

13) Support RSS spreading on ntuple filters in SFC driver, from Edward
    Cree.

14) Lots of sockmap work from John Fastabend. Applications can use eBPF
    to filter sendmsg and sendpage operations.

15) In-kernel receive TLS support, from Dave Watson.

16) Add XDP support to ixgbevf, this is significant because it should
    allow optimized XDP usage in various cloud environments. From Tony
    Nguyen.

17) Add new Intel E800 series "ice" ethernet driver, from Anirudh
    Venkataramanan et al.

18) IP fragmentation match offload support in nfp driver, from Pieter
    Jansen van Vuuren.

19) Support XDP redirect in i40e driver, from Björn Töpel.

20) Add BPF_RAW_TRACEPOINT program type for accessing the arguments of
    tracepoints in their raw form, from Alexei Starovoitov.

21) Lots of striding RQ improvements to mlx5 driver with many
    performance improvements, from Tariq Toukan.

22) Use rhashtable for inet frag reassembly, from Eric Dumazet.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net-next: (1678 commits)
  net: mvneta: improve suspend/resume
  net: mvneta: split rxq/txq init and txq deinit into SW and HW parts
  ipv6: frags: fix /proc/sys/net/ipv6/ip6frag_low_thresh
  net: bgmac: Fix endian access in bgmac_dma_tx_ring_free()
  net: bgmac: Correctly annotate register space
  route: check sysctl_fib_multipath_use_neigh earlier than hash
  fix typo in command value in drivers/net/phy/mdio-bitbang.
  sky2: Increase D3 delay to sky2 stops working after suspend
  net/mlx5e: Set EQE based as default TX interrupt moderation mode
  ibmvnic: Disable irqs before exiting reset from closed state
  net: sched: do not emit messages while holding spinlock
  vlan: also check phy_driver ts_info for vlan's real device
  Bluetooth: Mark expected switch fall-throughs
  Bluetooth: Set HCI_QUIRK_SIMULTANEOUS_DISCOVERY for BTUSB_QCA_ROME
  Bluetooth: btrsi: remove unused including <linux/version.h>
  Bluetooth: hci_bcm: Remove DMI quirk for the MINIX Z83-4
  sh_eth: kill useless check in __sh_eth_get_regs()
  sh_eth: add sh_eth_cpu_data::no_xdfar flag
  ipv6: factorize sk_wmem_alloc updates done by __ip6_append_data()
  ipv4: factorize sk_wmem_alloc updates done by __ip_append_data()
  ...

Merge tag 'docs-4.17' of git://git.lwn.net/linux

Pull documentation updates from Jonathan Corbet:
"There's been a fair amount of activity in Documentation/ this time
  around:

   - Lots of work aligning Documentation/ABI with reality, done by
     Aishwarya Pant.

   - The trace documentation has been converted to RST by Changbin Du

   - I thrashed up kernel-doc to deal with a parsing issue and to try to
     make the code more readable. It's still a 20+-year-old Perl hack,
     though.

   - Lots of other updates, typo fixes, and more"

* tag 'docs-4.17' of git://git.lwn.net/linux: (82 commits)
  Documentation/process: update FUSE project website
  docs: kernel-doc: fix parsing of arrays
  dmaengine: Fix spelling for parenthesis in dmatest documentation
  dmaengine: Make dmatest.rst indeed reST compatible
  dmaengine: Add note to dmatest documentation about supported channels
  Documentation: magic-numbers: Fix typo
  Documentation: admin-guide: add kvmconfig, xenconfig and tinyconfig commands
  Input: alps - Update documentation for trackstick v3 format
  Documentation: Mention why %p prints ptrval
  COPYING: use the new text with points to the license files
  COPYING: create a new file with points to the Kernel license files
  Input: trackpoint: document sysfs interface
  xfs: Change URL for the project in xfs.txt
  char/bsr: add sysfs interface documentation
  acpi: nfit: document sysfs interface
  block: rbd: update sysfs interface
  Documentation/sparse: fix typo
  Documentation/CodingStyle: Add an example for braces
  docs/vm: update 00-INDEX
  kernel-doc: Remove __sched markings
  ...