git.openwrt.org Git - openwrt/staging/blogic.git/log

perf tools: Print a newline before dumping Aggregated stats

When dumping events with 'perf report -D' the event print always starts
with a newline (see dump_event()).

Do the same with the "Aggregated stats" print so that it is not jammed
up against the last event print.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1435045969-15999-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf session: Print a newline when dumping PERF_RECORD_FINISHED_ROUND

With 'perf report -D' the PERF_RECORD_FINISHED_ROUND event was printed
without a newline, resulting in:

0x91a18 [0x8]: PERF_RECORD_FINISHED_ROUNDAggregated stats

Other events print their details, but PERF_RECORD_FINISHED_ROUND doesn't
have any so just add a print for a newline.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1435045969-15999-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Allow events with dot

The Intel events use a dot to separate event name and unit mask. Allow
dot in names in the scanner, and remove special handling of dot as EOF.
Also remove the hack in jevents to replace dot with underscore. This way
dotted events can be specified directly by the user.

I'm not fully sure this change to the scanner is correct (what was the
dot special case good for?), but I haven't found anything that breaks
with it so far at least.

Signed-off-by: Andi Kleen <ak@linux.intel.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Acked-by: Namhyung Kim <namhyung@kernel.org>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1433921123-25327-8-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf pmu: Split perf_pmu__new_alias()

Separate the event parsing code in perf_pmu__new_alias() out into a
separate function __perf_pmu__new_alias() so that code can be called
indepdently.

This is based on an earlier patch from Andi Kleen.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1433921123-25327-5-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf pmu: Use __weak definition from <linux/compiler.h>

Jiri Olsa pointed out, that the <linux/compiler.h> defines the attribute
'__weak'. We might as well use that.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Acked-by: Jiri Olsa <jolsa@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: linuxppc-dev@lists.ozlabs.org
Link: http://lkml.kernel.org/r/1433921123-25327-4-git-send-email-sukadev@linux.vnet.ibm.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Fix single target build dependency check

Currently if we build a single target like:

$ touch util/map.c && make util/map.o

It will not rebuild util/map.o if it already exists and util/map.c is
modified.

The reason is that the top-level 'Makefile' processes util/map.o as an
implicit rule and if util/map.o exists make considers the 'util/map.o'
target as done and will not nest into Makefile.perf.

Adding FORCE for '%', because that's what we want to nest into
Makefile.perf for any target.

Adding Makefile into phony targets, because make tries to rebuild it and
it's also resolved as '%' target.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434977452-32520-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add test for make install with prefix

Lukas Wunner reported issue (and fix[1]) with 'make install prefix=...'.
Adding automated test for this, so it wouldn't happen again.

[1]: 75e84ab906ef ("perf tools: Fix build breakage if prefix= is specified")

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434977452-32520-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Add testing for Makefile.perf

Currently we test only builds through top level Makefile, but seems like
there's a bunch of users using Makefile.perf directly.

Changing the make suite to be run for Makefile.perf as well. It takes
now considerable amount of time, but hopefully we catch more issues.

Also fixing the output indentation for make_kernelsrc and
make_kernelsrc_tools tests.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Lukas Wunner <lukas@wunner.de>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434977452-32520-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf top: Move toggling event logic into hists browser

Current 'f' key action to enable/disable events won't work if there're
more than one event since perf_evsel_menu__run() doesn't return the key.
So move it to the hists browser loop so that it can be processed as like
other key action, and it's more natural to handle it there IMHO.

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1434858076-6533-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

  - Replace CTRL+z with 'f' as hotkey for enable/disable events (Arnaldo Carvalho de Melo)

  - Do not exit when 'f' is pressed in 'report' mode (Arnaldo Carvalho de Melo)

  - Tell the user how to unfreeze events after pressing 'f' in 'perf top' (Arnaldo Carvalho de Melo)

  - React to unassigned hotkey pressing in 'top/report' (Arnaldo Carvalho de Melo)

  - Display total number of samples with --show-total-period in 'annotate' (Martin Liška)

  - Add timeout to make procfs mmap processing more robust (Kan Liang)

  - Fix sort__sym_cmp to also compare end of symbol (Yannick Brosseau)

Infrastructure changes:

  - Ensure thread-stack is flushed (Adrian Hunter)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf tools: Configurable per thread proc map processing time out

The time out to limit the individual proc map processing was hard code
to 500ms. This patch introduce a new option --proc-map-timeout to make
the time limit configurable.

Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ying Huang <ying.huang@intel.com>
Link: http://lkml.kernel.org/r/1434549071-25611-2-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add time out to force stop proc map processing

System wide sampling like 'perf top' or 'perf record -a' read all
threads /proc/xxx/maps before sampling. If there are any threads which
generating a keeping growing huge maps, perf will do infinite loop
during synthesizing. Nothing will be sampled.

This patch fixes this issue by adding per-thread timeout to force stop
this kind of endless proc map processing.

PERF_RECORD_MISC_PROC_MAP_PARSE_TIME_OUT is introduced to indicate that
the mmap record are truncated by time out. User will get warning
notification when truncated mmap records are detected.

Reported-by: Ying Huang <ying.huang@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Ying Huang <ying.huang@intel.com>
Link: http://lkml.kernel.org/r/1434549071-25611-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf report: Fix sort__sym_cmp to also compare end of symbol

When using a map file from a JIT, due to memory reuse, we can obtain
multiple symbols with the same start address but a different length.

The symbols__find does check for the end so not doing it in
sort__sym_cmp was causing the hist_entry in the annotate part of a
report to match to the wrong entry, causing a fatal error.

Signed-off-by: Yannick Brosseau <scientist@fb.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: kernel-team@fb.com
Link: http://lkml.kernel.org/r/1434584470-17771-1-git-send-email-scientist@fb.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists browser: React to unassigned hotkey pressing

When that happens we were just ignoring the key press, now this
message is presented in the bottom line (the help line):

"Press '?' for help on key bindings"

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-iyma2j5kj3q9i1stl4mfh90n@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf top: Tell the user how to unfreeze events after pressing 'f'

When the user presses 'f' to disable events the visual cues are, well,
the percentages not changing and the number of events freezing.

Be more explicit by changing the help line at the bottom of the screen
to show the following messages when 'f' is pressed:

"Press 'f' again to re-enable the events"

And then, when 'f' is pressed again:

"Press 'f' to disable the events or 'h'

Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-uhiswg9a9rxm5gxg7ptjskjn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists browser: Honour the help line provided by builtin-{top,report}.c

The hists_browser was replacing whatever helpline provided by 'top' or
'report' with a static "Press '?' for help on key bindings", fix it.

Now the message passed by top appears at the bottom of the screen:

"For a higher level overview, try: perf top --sort comm,dso"

As well the message that will be added when the user presses 'f' to
disable the events, something along the lines of "press f again to
re-enable...".

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-dacaja70mbfz3a0yj1n180gx@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf hists browser: Do not exit when 'f' is pressed in 'report' mode

The 'f' hotkey is only used when in 'top', dynamic mode, to
enable/disable events, currently not making sense in the 'report',
static mode, where we can't go from showing the histogram entries
created from a perf.data file to adding more events after recreating the
evlist created from the perf.data file, albeit possible, this is not
implemented right now.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-lholzf472pu98dkkijggwx2m@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf top: Replace CTRL+z with 'f' as hotkey for enable/disable events

I.e. 'freeze'/'unfreeze', this is because CTRL+z has a well known
action, i.e. suspend the app, perf needs to follow that convention, that
will be done on a separate patch, tho.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-oedcl6ovohara4koig14ayip@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf annotate: Rename source_line_percent to source_line_samples

To better reflect the purpose of this struct, that is to hold
info about samples, its total number and is percentage.

Cc: Martin Liska <mliska@suse.cz>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/n/tip-6bf8gwcl975uurl0ttpvtk69@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf annotate: Display total number of samples with --show-total-period

To compare two records on an instruction base, with --show-total-period
option provided, display total number of samples that belong to a line
in assembly language.

New hot key 't' is introduced for 'perf annotate' TUI.

Signed-off-by: Martin Liska <mliska@suse.cz>
Cc: Andi Kleen <andi@firstfloor.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/5583E26D.1040407@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Ensure thread-stack is flushed

The thread-stack represents a thread's current stack.  When a thread
exits there can still be many functions on the stack e.g. exit() can be
called many levels deep, so all the callers will never return.  To get
that information output, the thread-stack must be flushed.

Previously it was assumed the thread-stack would be flushed when the
struct thread was deleted.  With thread ref-counting it is no longer
clear when that will be, if ever. So instead explicitly flush all the
thread-stacks at the end of a session.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1432906425-9911-3-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo-2' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

  - List perf probes to stdout. (Masami Hiramatsu)

  - Return error when none of the requested probes were
    installed. (Masami Hiramatsu)

  - Cut off the gcc optimization postfixes from
    function name in 'perf probe'. (Masami Hiramatsu)

  - Allow disabling/enabling events dynamicly in 'perf top':
    a 'perf top' session can instantly become a 'perf report'
    one, i.e. going from dynamic analysis to a static one,
    returning to a dynamic one is possible, to toogle the
    modes, just press CTRL+z. (Arnaldo Carvalho de Melo)

  - Greatly speed up 'perf probe --list' by caching debuginfo.
    (Masami Hiramatsu)

  - Fix 'perf trace' race condition at the end of started
    workloads. (Sukadev Bhattiprolu)

  - Fix a problem when opening old perf.data with different
    byte order. (Wang Nan)

Infrastructure changes:

  - Replace map->referenced & maps->removed_maps with
    map->refcnt. (Arnaldo Carvalho de Melo)

  - Introduce the xyarray__reset() function. (Jiri Olsa)

  - Add thread_map__(alloc|realloc)() helpers. (Jiri Olsa)

  - Move perf_evsel__(alloc|free|reset)_counts into stat object. (Jiri Olsa)

  - Introduce perf_counts__(new|delete|reset)() functions. (Jiri Olsa)

  - Ignore .config-detected in .gitignore. (Wang Nan)

  - Move libtraceevent dynamic list to separated LDFLAGS
    variable. (Wang Nan)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf top: Allow disabling/enabling events dynamicly

Now it is possible to press CTRL+z at anytime and that will disable the
events being monitored, essentially turning 'top' into 'report', with
pressing CTRL+z again making it enable the events again, returning to
the 'top' behaviour, i.e. dynamic + decaying of older samples.

One may want, for instance, play with:

-d, --delay <n> number of seconds to delay between refreshes

and:

-z, --zero zero history across updates

Plus CTRL+z to see only the events since last zeroing, etc.

Suggested-by: Ingo Molnar <mingo@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zq7tnh5462blt2yda0bcxh5b@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evlist: Add toggle_enable() method

For an upcoming feature in 'perf top' we will have a hotkey to
enable/disable events, so remember if the events in the list are
enabled or disabled and allows toggling this state using a new
method.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-64c4jvdl5feg2zhimxvokqka@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf trace: Fix race condition at the end of started workloads

I get following crash on multiple systems and across several releases
(at least since v3.18).

Core was generated by `/tmp/perf trace sleep 0.2 '.
Program terminated with signal SIGSEGV, Segmentation fault.
#0  perf_mmap__read_head (mm=0x3fff9bf30070) at util/evlist.h:195
195 u64 head = ACCESS_ONCE(pc->data_head);
(gdb) bt
#0  perf_mmap__read_head (mm=0x3fff9bf30070) at util/evlist.h:195
#1  perf_evlist__mmap_read (evlist=0x10027f11910, idx=<optimized out>)
    at util/evlist.c:637
#2  0x000000001003ce4c in trace__run (argv=<optimized out>,
    argc=<optimized out>, trace=0x3fffd7b28288) at builtin-trace.c:2259
#3  cmd_trace (argc=<optimized out>, argv=<optimized out>,
    prefix=<optimized out>) at builtin-trace.c:2799
#4  0x00000000100657b8 in run_builtin (p=0x10176798 <commands+480>, argc=3,
    argv=0x3fffd7b2b550) at perf.c:370
#5  0x00000000100063e8 in handle_internal_command (argv=0x3fffd7b2b550, argc=3)
    at perf.c:429
#6  run_argv (argv=0x3fffd7b2af70, argcp=0x3fffd7b2af7c) at perf.c:473
#7  main (argc=3, argv=0x3fffd7b2b550) at perf.c:588

The problem seems to be a race condition, when the application has just
exited.  Some/all fds associated with the perf-events (tracepoints) go
into a POLLHUP/ POLLERR state and the mmap region associated with those
events are unmapped (in perf_evlist__filter_pollfd()).

But we go back and do a perf_evlist__mmap_read() which assumes that the
mmaps are still valid and we hit the crash.

If the mapping for an event is released, its refcnt is 0 (and ->base
is NULL), so ensure we have non-zero refcount before accessing the map.

Note that perf-record has a similar logic but unlike perf-trace, the
record__mmap_read_all() checks the evlist->mmap[i].base before accessing
the map.

Signed-off-by: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Li Zhang <zhlcindy@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/20150612060003.GA19913@us.ibm.com
[ Fixed it up to use atomic_read() ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Speed up perf probe --list by caching debuginfo

Speed up the "perf probe --list" by caching the last used debuginfo.
perf probe --list always open and load debuginfo for each entry of probe
list. This takes very a long time.

E.g. with vfs_* events (total 96 probes)

  [root@localhost perf]# time  ./perf probe -l &> /dev/null

  real    0m25.376s
  user    0m24.381s
  sys     0m1.012s

To solve this issue, this adds debuginfo_cache to cache the
last used debuginfo on memory.

With this fix, the perf-probe --list significantly improves
its speed.

  [root@localhost perf]#  time  ./perf probe -l &> /dev/null

  real    0m0.161s
  user    0m0.136s
  sys     0m0.025s

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150617145854.19715.15314.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Show usage even if the last event is skipped

When the last part of converted events are blacklisted or out-of-text,
those are skipped and perf probe doesn't show usage examples.  This
fixes it to show the example even if the last part of event list is
skipped.

E.g. without this patch, events are added, but suddenly end:

  # perf probe vfs_*
  vfs_caches_init_early is out of .text, skip it.
  vfs_caches_init is out of .text, skip it.
  Added new events:
    probe:vfs_fallocate  (on vfs_*)
    probe:vfs_open       (on vfs_*)
  ...
    probe:vfs_dentry_acceptable (on vfs_*)
    probe:vfs_load_quota_inode (on vfs_*)
  #

With this fix:

  # perf probe vfs_*
  vfs_caches_init_early is out of .text, skip it.
  vfs_caches_init is out of .text, skip it.
  Added new events:
    probe:vfs_fallocate  (on vfs_*)
  ...
    probe:vfs_load_quota_inode (on vfs_*)

  You can now use it in all perf tools, such as:

perf record -e probe:vfs_load_quota_inode -aR sleep 1

Note that this can be reproduced ONLY IF the vfs_caches_init* is the
last part of matched symbol list. I've checked this happens on
"3.19.0-generic #18-Ubuntu" kernel binary.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150616115057.19906.5502.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Move libtraceevent dynamic list to separated LDFLAGS variable

Commit e3d09ec8126fe2c9a3ade661e2126e215ca27a80 ("tools lib traceevent:
Export dynamic symbols used by traceevent plugins") adds libtraceevent
dynamic list directly into LDFLAGS, which makes all targets depend on
that list through LDFLAGS.

This is not good since some of targets like libgtk.so doesn't use plugin
at all, but require the existance of that list because of linker
options.

This patch isolates the -Xlink option into LIBTRACEEVENT_DYNAMIC_LIST_LDFLAGS,
makes only perf and perf.so use it.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1434552389-89144-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix a problem when opening old perf.data with different byte order

Following error occurs when trying to use 'perf report' on x86_64 to
cross analysis a perf.data generated by an old perf on a big-endian
machine:

# perf report
*** Error in `/home/w00229757/perf': free(): invalid next size (fast): 0x00000000032c99f0 ***
======= Backtrace: =========
/lib64/libc.so.6(+0x6eeef)[0x7ff6ff7e2eef]
/lib64/libc.so.6(+0x78cae)[0x7ff6ff7eccae]
/lib64/libc.so.6(+0x79987)[0x7ff6ff7ed987]
/path/to/perf[0x4ac734]
/path/to/perf[0x4ac829]
/path/to/perf(perf_header__process_sections+0x129)[0x4ad2c9]
/path/to/perf(perf_session__read_header+0x2e1)[0x4ad9e1]
/path/to/perf(perf_session__new+0x168)[0x4bd458]
/path/to/perf(cmd_report+0xfa0)[0x43eb70]
/path/to/perf[0x47adc3]
/path/to/perf(main+0x5f6)[0x42fd06]
/lib64/libc.so.6(__libc_start_main+0xf5)[0x7ff6ff795bd5]
/path/to/perf[0x42fe35]
======= Memory map: ========
[SNIP]

The bug is in perf_event__attr_swap(). It swaps all fields in 'struct
perf_event_attr' without checking whether the swapped field exist or
not. In addition, in read_event_desc() allocs memory for attr according
to size read from perf.data.

Therefore, if the perf.data is collected by an old perf (without
aux_watermark, for example), when perf_event__attr_swap() swaping
attr->aux_watermark it destroy malloc's metadata.

This patch introduces boundary checking in perf_event__attr_swap(). It
adds macros bswap_field_64 and bswap_field_32 into
perf_event__attr_swap() to make it only swap exist fields.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Ingo Molnar <mingo@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1434534999-85347-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Ignore .config-detected in .gitignore

Commit fcfd6611fbccdbf2593bd949097a5c0e45cd96da ("tools build: Add
detected config support") dynamically creates .config-detected. Add it
to .gitignore.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1434542358-5430-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Fix to return error if no probe is added

Fix perf probe to return an error if no probe is added due to the given
probe point being on the blacklist.

To fix this problem, this moves the blacklist checking to right after
finding symbols/probe-points and marks them as skipped.

If all the symbols are skipped, "perf probe"  returns an error as it
fails to find the corresponding probe address.

E.g. currently if a blacklisted probe is given:

  # perf probe do_trap && echo 'succeed'
  Added new event:
  Warning: Skipped probing on blacklisted function: sync_regs
  succeed

No! It must fail! With this patch, it correctly fails:

  # perf probe do_trap && echo 'succeed'
  do_trap is blacklisted function, skip it.
  Probe point 'do_trap' not found.
    Error: Failed to add events.

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150616115055.19906.31359.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf unwind: Fix a compile error

When libunwind is on, there is a compile error as :

util/unwind-libunwind.c:363:21: error: 'dso' undeclared (first use in this function)
dso__data_put_fd(dso);

This patch fixes it.

Signed-off-by: Hou Pengyang <houpengyang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Wang Nan <wangnan0@huawei.com>
Fixes: 4bb11d012ab248d0 ("perf tools: Add dso__data_get/put_fd()")
Link: http://lkml.kernel.org/r/1434453395-10560-1-git-send-email-houpengyang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Introduce perf_counts__(new|delete|reset) functions

Move 'struct perf_counts' allocation|free|reset code into separate
functions.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434269985-521-13-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Move perf_evsel__(alloc|free|reset)_counts into stat object

It's stat specific. Updating python build objects with stat.c.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434269985-521-12-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add thread_map__(alloc|realloc) helpers

In order to have 'struct thread_map' allocation on single place and can
change it easily in following patch.

Using alloc|realloc for static helpers, because thread_map__new is
already used in public interface.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434269985-521-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Introduce xyarray__reset function

To zero all the xyarray contents. It will be used in following patches.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1434269985-521-2-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: List probes in stdout

Since commit 5e17b28f1e24 ("perf probe: Add --quiet option to
suppress output result message") have replaced printf with pr_info,
perf probe -l outputs its result in stderr. However, that is not
what the commit expected.

E.g.:

  # perf probe -l > /dev/null
    probe:vfs_read       (on vfs_read@ksrc/linux-3/fs/read_write.c)

With this fix:

  # perf probe -l > list
  # cat list
    probe:vfs_read       (on vfs_read@ksrc/linux-3/fs/read_write.c)

Of course, --quiet(-q) still works on --add/--del.

  # perf probe -q vfs_write
  # perf probe -l
    probe:vfs_read       (on vfs_read@ksrc/linux-3/fs/read_write.c)
    probe:vfs_write      (on vfs_write@ksrc/linux-3/fs/read_write.c)
  -----

Reported-by: Naohiro Aota <naota@elisp.net>
Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150613013116.24402.2923.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib traceevent: Fix python/perf.so compiling error

'make build-test' finds an error that make_python_perf_so fails due to
missing of libtraceevent-dynamic-list:

'.../python2' util/setup.py \
   --quiet build_ext; \
   mkdir -p python && \
   cp python_ext_build/lib/perf.so python/
   /path/to/ld: cannot open linker script file /path/to/kernel/tools/lib/traceevent/libtraceevent-dynamic-list: No such file or directory
   collect2: error: ld returned 1 exit status
   error: command 'x86_64-linux-gcc' failed with exit status 1
   cp: cannot stat 'python_ext_build/lib/perf.so': No such file or directory
   make[3]: *** [python/perf.so] Error 1
   make[2]: *** [python/perf.so] Error 2
     test: test -f ./python/perf.so
     make[1]: *** [make_python_perf_so] Error 1
     make: *** [build-test] Error 2
     make: Leaving directory `/path/to/kernel/tools/perf'

This is caused by commit e3d09ec8126fe2c9a3ade661e2126e215ca27a80
("tools lib traceevent: Export dynamic symbols used by traceevent
plugins") that, it adds the list file to LDFLAGS but forgot to add it to
dependency list of python/perf.so.

This patch fixes this problem.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: He Kuang <hekuang@huawei.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1434079031-123162-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Replace map->referenced & maps->removed_maps with map->refcnt

Use just reference counts, so that when no more hist_entry instances
references a map and the thread instance goes away by processing a
PERF_RECORD_EXIT, we can delete the maps.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-oym7lfhcc7ss6xpz44h7nbxs@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Cut off the gcc optimization postfixes from function name

Cut off the postfixes which gcc added for optimized routines from the
event name automatically generated from symbol name, since *probe-events
doesn't accept it.  Those symbols will be used if we don't use debuginfo
to find target functions.

E.g. without this fix;
  -----
  # perf probe -va alloc_buf.isra.23
  probe-definition(0): alloc_buf.isra.23
  symbol:alloc_buf.isra.23 file:(null) line:0 offset:0 return:0 lazy:(null)
  [...]
  Opening /sys/kernel/debug/tracing/kprobe_events write=1
  Added new event:
  Writing event: p:probe/alloc_buf.isra.23 _text+4869328
  Failed to write event: Invalid argument
    Error: Failed to add events. Reason: Invalid argument (Code: -22)
  -----
With this fix;
  -----
  perf probe -va alloc_buf.isra.23
  probe-definition(0): alloc_buf.isra.23
  symbol:alloc_buf.isra.23 file:(null) line:0 offset:0 return:0 lazy:(null)
  [...]
  Opening /sys/kernel/debug/tracing/kprobe_events write=1
  Added new event:
  Writing event: p:probe/alloc_buf _text+4869328
    probe:alloc_buf      (on alloc_buf.isra.23)

  You can now use it in all perf tools, such as:

   perf record -e probe:alloc_buf -aR sleep 1

  -----

Signed-off-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Naohiro Aota <naota@elisp.net>
Cc: Peter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150612050820.20548.41625.stgit@localhost.localdomain
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes:

User visible changes:

  - Beautify the perf_event_open() syscall in 'perf trace'. (Arnaldo Carvalho de Melo)

  - Error out unsupported group leader immediately in 'perf stat'. (Kan Liang)

  - Amend some 'perf record' option summaries (period, etc). (Peter Zijlstra)

  - Avoid possible race condition in copyfile() in 'perf buildid-cache'. (Milos Vyletel)

Infrastructure changes:

  - Display 0x for hex values when printing the attribute. (Adrian Hunter)

  - Update MANIFEST per files removed from kernel. (David Ahern)

Build fixes:

  - Fix PRIu64 printf related failure on 32-bit arch. (He Kuang)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf tools: Update MANIFEST per files removed from kernel

Building perf out of kernel tree is currently broken because the
MANIFEST file refers to kernel files that have been removed. With this
patch make perf-targz-src-pkg succeeds as does building perf using the
generated tarfile.

Signed-off-by: David Ahern <david.ahern@oracle.com>
Link: http://lkml.kernel.org/r/1433526173-172332-1-git-send-email-david.ahern@oracle.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

trace: Beautify perf_event_open syscall

Syswide tracing and then running 'stat' and 'trace':

$ perf trace -e perf_event_open
1034.649 (0.019 ms): perf/6133 perf_event_open(attr_uptr: 0x36f0360, pid: 16134, cpu: -1, group_fd: -1, flags: FD_CLOEXEC) = -1 EINVAL Invalid argument
1034.670 (0.008 ms): perf/6133 perf_event_open(attr_uptr: 0x36f0360, pid: 16134, cpu: -1, group_fd: -1) = -1 EINVAL Invalid argument
1034.681 (0.007 ms): perf/6133 perf_event_open(attr_uptr: 0x36f0360, pid: 16134, cpu: -1, group_fd: -1) = -1 EINVAL Invalid argument
1034.692 (0.007 ms): perf/6133 perf_event_open(attr_uptr: 0x36f0360, pid: 16134, cpu: -1, group_fd: -1) = -1 EINVAL Invalid argument
9986.983 (0.014 ms): trace/6139 perf_event_open(attr_uptr: 0x7ffd9c629320, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9987.026 (0.016 ms): trace/6139 perf_event_open(attr_uptr: 0x37c7e70, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9987.041 (0.008 ms): trace/6139 perf_event_open(attr_uptr: 0x37c7e70, pid: -1, group_fd: -1, flags: FD_CLOEXEC) = 3
9987.489 (0.092 ms): trace/6139 perf_event_open(attr_uptr: 0x3795ee0, pid: 16140, group_fd: -1, flags: FD_CLOEXEC) = 3
9987.536 (0.044 ms): trace/6139 perf_event_open(attr_uptr: 0x3795ee0, pid: 16140, cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 4
9987.580 (0.041 ms): trace/6139 perf_event_open(attr_uptr: 0x3795ee0, pid: 16140, cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 5
9987.620 (0.037 ms): trace/6139 perf_event_open(attr_uptr: 0x3795ee0, pid: 16140, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 7
9987.659 (0.035 ms): trace/6139 perf_event_open(attr_uptr: 0x37975d0, pid: 16140, group_fd: -1, flags: FD_CLOEXEC) = 8
9987.692 (0.031 ms): trace/6139 perf_event_open(attr_uptr: 0x37975d0, pid: 16140, cpu: 1, group_fd: -1, flags: FD_CLOEXEC) = 9
9987.727 (0.032 ms): trace/6139 perf_event_open(attr_uptr: 0x37975d0, pid: 16140, cpu: 2, group_fd: -1, flags: FD_CLOEXEC) = 10
9987.761 (0.031 ms): trace/6139 perf_event_open(attr_uptr: 0x37975d0, pid: 16140, cpu: 3, group_fd: -1, flags: FD_CLOEXEC) = 11

Need to intercept perf_copy_attr() with a kprobe or with eBPF...

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-njb105hab2i3t5dexym9lskl@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Fix build failure on 32-bit arch

Failed in 32bit arch build like this:

    CC       /opt/h00206996/output/perf/arm32/builtin-record.o
  util/session.c: In function ‘perf_session__warn_about_errors’:
  util/session.c:1304:9: error: format ‘%lu’ expects argument of type ‘long unsigned int’,
                         but argument 2 has type ‘long long unsigned int’ [-Werror=format=]

  builtin-report.c: In function ‘perf_evlist__tty_browse_hists’:
  builtin-report.c:323:2: error: format ‘%lu’ expects argument of type ‘long unsigned int’,
                          but argument 3 has type ‘u64’ [-Werror=format=]

Replace %lu format strings in warning message with PRIu64 for u64
'total_lost_samples' to fix this problem.

Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1434026664-71642-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Error out unsupported group leader immediately

perf stat ignores the unsupported event and continue to count supported
event. But if the unsupported event is group leader, perf tool will
crash. After applying this patch, the unsupported group leader will
error out immediately.

Without this patch:

  $ perf stat -x, -e '{node-prefetch-refs,cycles}' --  sleep 1
  perf: util/evsel.c:1009: get_group_fd: Assertion `!(fd == -1)' failed.
  Aborted (core dumped)

With this patch:

  $ perf stat -x, -e '{node-prefetch-refs,cycles}' --  sleep 1
  Error:
  The node-prefetch-refs event is not supported.

Commiter note: Here I got a different output, but no core dump:

  [acme@zoo linux]$ perf stat -x, -e '{node-prefetch-refs,cycles}' -- sleep 1
  Error:
  The sys_perf_event_open() syscall returned with 22 (Invalid argument)
  for event (node-prefetch-refs).
  /bin/dmesg may provide additional information.
  No CONFIG_PERF_EVENTS=y kernel support configured?

Signed-off-by: Kan Liang <kan.liang@intel.com>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <andi@firstfloor.org>
Link: http://lkml.kernel.org/r/1434004360-8570-1-git-send-email-kan.liang@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf evsel: Display 0x for hex values when printing the attribute

Need to display '0x' prefix for hex values otherwise it is not obvious
they are hex.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1434027064-7554-1-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf record: Amend option summaries

Because there's too many options and I cannot read, I frequently get
confused between -c and -P, and try to do things like:

perf record -P 50000 -- foo

Which does not work; try and make the option description slightly longer
and hopefully less confusing.

Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20150610144850.GP19282@twins.programming.kicks-ass.net
[ Do those changes on the man page as well ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Avoid possible race condition in copyfile()

Use unique temporary files when copying to buildid dir to prevent races
in case multiple instances are trying to copy same file. This is done by

- creating template in form <path>/.<filename>.XXXXXX where the suffix is
used by mkstemp() to create unique file
- change file mode
- copy content
- if successful link temp file to target file
- unlink temp file

At this point the only file left at target path should be the desired
one either created by us or other instance if we raced. This should also
prevent not yet fully copied files to be visible to to other perf
instances that could try to parse them.

On top of that slow_copyfile no longer needs to deal with file mode when
creating file since temporary file is already created and mode is set.

Succesfully tested by myself by running perf record, archive and reading
the data on other system and by running perf buildid-cache on perf
binary itself. I also did revert fix from 0635b0f that to exposes
previously fixed race with EEXIST and recreator test passed sucessfully.

Signed-off-by: Milos Vyletel <milos@redhat.com>
Acked-by: Ingo Molnar <mingo@kernel.org>
Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1433775018-19868-1-git-send-email-milos@redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

  - Fix perf.data size reporting in 'perf record' in no-buildid mode (He Kuang)

Infrastructure changes:

  - Protect accesses the DSO rbtrees/lists with a rw lock and reference
    count struct dso instances (Arnaldo Carvalho de Melo)

  - Export dynamic symbols used by traceevent plugins (He Kuang)

  - Add libtrace-dynamic-list file to libtraceevent's .gitignore (He Kuang)

  - Refactor shadow stats code in 'perf stat', prep work for further
    patchkits (Jiri Olsa)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf tools: Reference count struct dso

This has a different model than the 'thread' and 'map' struct lifetimes:
there is not a definitive "don't use this DSO anymore" event, i.e. we may
get many 'struct map' holding references to the '/usr/lib64/libc-2.20.so'
DSO but then at some point some DSO may have no references but we still
don't want to straight away release its resources, because "soon" we may
get a new 'struct map' that needs it and we want to reuse its symtab or
other resources.

So we need some way to garbage collect it when crossing some memory
usage threshold, which is left for anoter patch, for now it is
sufficient to release it when calling dsos__exit(), i.e. when deleting
the whole list as part of deleting the 'struct machine' containing it,
which will leave only referenced objects being used.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-majzgz07cm90t2tejrjy4clf@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Protect accesses the dso rbtrees/lists with a rw lock

To allow concurrent access, next step: refcount struct dso instances, so
that we can ditch unused them when the last map pointing to it goes
away.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-yk1k08etpd2aoe3tnrf0oizn@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf machine: Fix up some more method names

Calling the function 'machine__new_module' implies a new 'module' will
be allocated, when in fact what is returned is a 'struct map' instance,
that not necessarily will be instantiated, as if one already exists with
the given module name, it will be returned instead.

So be consistent with other "find and if not there, create" like
functions, like machine__findnew_thread, machine__findnew_dso, etc, and
rename it to machine__findnew_module_map(), that in turn will call
machine__findnew_module_dso().

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-acv830vd3hwww2ih5vjtbmu3@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf record: Fix perf.data size in no-buildid mode

The size of perf.data is missing update in no-buildid mode, which gives
wrong output result.

Before this patch:

  $ perf.perf record -B -e syscalls:sys_enter_open uname
  Linux
  [ perf record: Woken up 1 times to  write data ]
  [ perf record: Captured and wrote 0.000 MB perf.data ]

After this patch:

  $ perf.perf record -B -e syscalls:sys_enter_open uname
  Linux
  [ perf record: Woken up 1 times to write data ]
  [ perf record: Captured and wrote 0.001 MB perf.data ]

Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1432819050-30511-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib traceevent: Ignore libtrace-dynamic-list file

The libtrace-dynamic-list file is used to export symbols used by
traceevent plugins.

Signed-off-by: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1432819735-35040-2-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools lib traceevent: Export dynamic symbols used by traceevent plugins

Traceevent plugins need dynamic symbols exported from libtraceevent.a,
otherwise a dlopen error will occur during plugins loading.

This patch uses dynamic-list-file to export dynamic symbols which will
be used in plugins to perf executable.

The problem is covered up if feature-libpython is enabled, because
PYTHON_EMBED_LDOPTS contains '-Xlinker --export-dynamic' which adds all
symbols to the dynamic symbol table. So we should reproduce the problem
by setting NO_LIBPYTHON=1.

Before this patch:

  (Prepare plugins)
  $ ls /root/.traceevent/plugins/
  plugin_sched_switch.so
  plugin_function.so
  ...

  $ perf record -e 'ftrace:function' ls

  $ perf script
    Warning: could not load plugin '/mnt/data/root/.traceevent/plugins/plugin_sched_switch.so'
    /root/.traceevent/plugins/plugin_sched_switch.so: undefined symbol: pevent_unregister_event_handler

    Warning: could not load plugin '/root/.traceevent/plugins/plugin_function.so'
    /root/.traceevent/plugins/plugin_function.so: undefined symbol: warning
    ...
           :1049  1049 [000]  9666.754487: ftrace:function:  ffffffff8118bc50 <-- ffffffff8118c5b3
           :1049  1049 [000]  9666.754487: ftrace:function:  ffffffff818e2440 <-- ffffffff8118bc75
           :1049  1049 [000]  9666.754487: ftrace:function:  ffffffff8106eee0 <-- ffffffff811212e2

After this patch:

  $ perf record -e 'ftrace:function' ls
  $ perf script
           :1049  1049 [000]  9666.754487: ftrace:function: __set_task_comm
           :1049  1049 [000]  9666.754487: ftrace:function:    _raw_spin_lock
           :1049  1049 [000]  9666.754487: ftrace:function: task_tgid_nr_ns
           ...

Signed-off-by: He Kuang <hekuang@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Wang Nan <wangnan0@huawei.com>
Link: http://lkml.kernel.org/r/1432819735-35040-1-git-send-email-hekuang@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Move shadow stat counters into separate object

Separating shadow counters code into separate object as a cleanup, but
mainly for upcomming changes, so could use it from script command
context.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-10-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Add aggr_mode argument to print_shadow_stats function

As preparation for moving shadow counters code into its own object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-9-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Add output file argument to print_shadow_stats function

As preparation for moving shadow counters code into its own object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-8-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Introduce print_shadow_stats function

Move shadow counters display code into separate function as preparation
for moving it into its own object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-7-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Introduce reset_shadow_stats function

Move shadow counters reset code into separate function
as preparation for moving it into its own object.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-6-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Remove transaction_run from shadow update/print code

It's no longer needed, because we use nameid to recognize transaction
events.

Keeping it only in stat code to initialize transaction events.

I.e. struct perf_stat::id, accessible via evsel->priv, will be only set
for transaction related events.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-5-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Remove setup_events function

We can use already existing parse_events interface.

Both transaction_attrs and transaction_limited_attrs are changed to be
single strings.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-4-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Replace transaction event possition check with id check

Using perf_stat::id to check for transaction events, instead of current
position based way.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/1433341559-31848-3-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf stat: Add id into perf_stat struct

We need fast way to identify evsel as transaction event for shadow
counters computation. Currently we are using possition (in evlist) based
way.

Adding 'id' into 'struct perf_stat' so it can carry transaction event ID
and we can use it for shadow counters computations.

Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/r/20150604135055.GB23625@krava.redhat.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf/x86/intel/pebs: Add PEBSv3 decoding

PEBSv3 as present on Skylake fixed the long standing issue of the
status bits. They now really reflect the events that generated the
record.

Tested-by: Andi Kleen <ak@linux.intel.com>
Tested-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf tools: handle PERF_RECORD_LOST_SAMPLES

This patch modifies the perf tool to handle the new RECORD type,
PERF_RECORD_LOST_SAMPLES.

The number of lost-sample events is stored in
.nr_events[PERF_RECORD_LOST_SAMPLES]. The exact number of samples
which the kernel dropped is stored in total_lost_samples.

When the percentage of dropped samples is greater than 5%, a warning
is printed.

Here are some examples:

Eg 1, Recording different frequently-occurring events is safe with the
      patch. Only a very low drop rate is associated with such actions.

$ perf record -e '{cycles:p,instructions:p}' -c 20003 --no-time ~/tchain ~/tchain

$ perf report -D | tail
          SAMPLE events:     120243
           MMAP2 events:          5
    LOST_SAMPLES events:         24
  FINISHED_ROUND events:         15
cycles:p stats:
           TOTAL events:      59348
          SAMPLE events:      59348
instructions:p stats:
           TOTAL events:      60895
          SAMPLE events:      60895

$ perf report --stdio --group
# To display the perf.data header info, please use --header/--header-only options.
#
#
# Total Lost Samples: 24
#
# Samples: 120K of event 'anon group { cycles:p, instructions:p }'
# Event count (approx.): 24048600000
#
#         Overhead  Command      Shared Object     Symbol
# ................  ...........  ................
..................................
#
    99.74%  99.86%  tchain_edit  tchain_edit       [.] f3
     0.09%   0.02%  tchain_edit  tchain_edit       [.] f2
     0.04%   0.00%  tchain_edit  [kernel.vmlinux]  [k] ixgbe_read_reg

Eg 2, Recording the same thing multiple times can lead to high drop
      rate, but it is not a useful configuration.

$ perf record -e '{cycles:p,cycles:p}' -c 20003 --no-time ~/tchain
Warning: Processed 600592 samples and lost 99.73% samples!
[perf record: Woken up 148 times to write data]
[perf record: Captured and wrote 36.922 MB perf.data (1206322 samples)]
[perf record: Woken up 1 times to write data]
[perf record: Captured and wrote 0.121 MB perf.data (1629 samples)]

Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1431285195-14269-9-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Introduce PERF_RECORD_LOST_SAMPLES

After enlarging the PEBS interrupt threshold, there may be some mixed up
PEBS samples which are discarded by the kernel.

This patch makes the kernel emit a PERF_RECORD_LOST_SAMPLES record with
the number of possible discarded records when it is impossible to demux
the samples.

It makes sure the user is not left in the dark about such discards.

Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1431285195-14269-8-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/intel/x86: Enlarge the PEBS buffer

Currently the PEBS buffer size is 4k, it can only hold about 21
PEBS records. This patch enlarges the PEBS buffer size to 64k
(the same as the BTS buffer).

64k memory can hold about 330 PEBS records. This will significantly
reduce the number of PMIs when batched PEBS interrupts are enabled.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1430940834-8964-7-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Drain the PEBS buffer during context switches

Flush the PEBS buffer during context switches if PEBS interrupt threshold
is larger than one. This allows perf to supply TID for sample outputs.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1430940834-8964-6-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Implement batched PEBS interrupt handling (large PEBS interrupt threshold)

PEBS always had the capability to log samples to its buffers without
an interrupt. Traditionally perf has not used this but always set the
PEBS threshold to one.

For frequently occurring events (like cycles or branches or load/store)
this in term requires using a relatively high sampling period to avoid
overloading the system, by only processing PMIs. This in term increases
sampling error.

For the common cases we still need to use the PMI because the PEBS
hardware has various limitations. The biggest one is that it can not
supply a callgraph. It also requires setting a fixed period, as the
hardware does not support adaptive period. Another issue is that it
cannot supply a time stamp and some other options. To supply a TID it
requires flushing on context switch. It can however supply the IP, the
load/store address, TSX information, registers, and some other things.

So we can make PEBS work for some specific cases, basically as long as
you can do without a callgraph and can set the period you can use this
new PEBS mode.

The main benefit is the ability to support much lower sampling period
(down to -c 1000) without extensive overhead.

One use cases is for example to increase the resolution of the c2c tool.
Another is double checking when you suspect the standard sampling has
too much sampling error.

Some numbers on the overhead, using cycle soak, comparing the elapsed
time from "kernbench -M -H" between plain (threshold set to one) and
multi (large threshold).

The test command for plain:
  "perf record --time -e cycles:p -c $period -- kernbench -M -H"

The test command for multi:
  "perf record --no-time -e cycles:p -c $period -- kernbench -M -H"

( The only difference of test command between multi and plain is time
  stamp options. Since time stamp is not supported by large PEBS
  threshold, it can be used as a flag to indicate if large threshold is
  enabled during the test. )

period    plain(Sec)  multi(Sec)  Delta
10003     32.7        16.5        16.2
20003     30.2        16.2        14.0
40003     18.6        14.1        4.5
80003     16.8        14.6        2.2
100003    16.9        14.1        2.8
800003    15.4        15.7        -0.3
1000003   15.3        15.2        0.2
2000003   15.3        15.1        0.1

With periods below 100003, plain (threshold one) cause much more
overhead. With 10003 sampling period, the Elapsed Time for multi is
even 2X faster than plain.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1430940834-8964-5-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Handle multiple records in the PEBS buffer

When the PEBS interrupt threshold is larger than one record and the
machine supports multiple PEBS events, the records of these events are
mixed up and we need to demultiplex them.

Demuxing the records is hard because the hardware is deficient. The
hardware has two issues that, when combined, create impossible
scenarios to demux.

The first issue is that the 'status' field of the PEBS record is a copy
of the GLOBAL_STATUS MSR at PEBS assist time. To see why this is a
problem let us first describe the regular PEBS cycle:

A) the CTRn value reaches 0:
  - the corresponding bit in GLOBAL_STATUS gets set
  - we start arming the hardware assist
  < some unspecified amount of time later -- this could cover multiple
    events of interest >

B) the hardware assist is armed, any next event will trigger it

C) a matching event happens:
  - the hardware assist triggers and generates a PEBS record
    this includes a copy of GLOBAL_STATUS at this moment
  - if we auto-reload we (re)set CTRn
  - we clear the relevant bit in GLOBAL_STATUS

Now consider the following chain of events:

  A0, B0, A1, C0

The event generated for counter 0 will include a status with counter 1
set, even though its not at all related to the record. A similar thing
can happen with a !PEBS event if it just happens to overflow at the
right moment.

The second issue is that the hardware will only emit one record for two
or more counters if the event that triggers the assist is 'close'. The
'close' can be several cycles. In some cases even the complete assist,
if the event is something that doesn't need retirement.

For instance, consider this chain of events:

  A0, B0, A1, B1, C01

Where C01 is an event that triggers both hardware assists, we will
generate but a single record, but again with both counters listed in the
status field.

This time the record pertains to both events.

Note that these two cases are different but undistinguishable with the
data as generated. Therefore demuxing records with multiple PEBS bits
(we can safely ignore status bits for !PEBS counters) is impossible.

Furthermore we cannot emit the record to both events because that might
cause a data leak -- the events might not have the same privileges -- so
what this patch does is discard such events.

The assumption/hope is that such discards will be rare.

Here lists some possible ways you may get high discard rate.

  - when you count the same thing multiple times. But it is not a useful
    configuration.
  - you can be unfortunate if you measure with a userspace only PEBS
    event along with either a kernel or unrestricted PEBS event. Imagine
    the event triggering and setting the overflow flag right before
    entering the kernel. Then all kernel side events will end up with
    multiple bits set.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
[ Changelog improvements. ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1430940834-8964-4-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Introduce setup_pebs_sample_data()

Move code that sets up the PEBS sample data to a separate function.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1430940834-8964-3-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: Use the PEBS auto reload mechanism when possible

When a fixed period is specified, this patch makes perf use the PEBS
auto reload mechanism. This makes normal profiling faster, because
it avoids one costly MSR write in the PMI handler.

However, the reset value will be loaded by hardware assist. There is a
small delay compared to the previous non-auto-reload mechanism. The
delay time is arbitrary, but very small. The assist cost is 400-800
cycles, assuming common cases with everything cached. The minimum period
the patch currently uses is 10000. In that extreme case it can be ~10%
if cycles are used.

Signed-off-by: Yan, Zheng <zheng.z.yan@intel.com>
Signed-off-by: Kan Liang <kan.liang@intel.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/1430940834-8964-2-git-send-email-kan.liang@intel.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf record: Add support for sampling indirect jumps

This patch adds a new branch sampling type support for indirect jumps:

perf record -j ind_jmp .......

It enables analysis of indirect jumps targets. It requires kernel and
possibly hardware support to operate correctly.

Signed-off-by: Stephane Eranian <eranian@google.com>
[ Fixup against: f00898f4e20b (perf tools: Move branch option parsing to own file) ]
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: dsahern@gmail.com
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/1431637800-31061-4-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf/x86/intel: add support for PERF_SAMPLE_BRANCH_IND_JUMP

This patch enables support for branch sampling filter
for indirect jumps (IND_JUMP). It enables LBR IND_JMP
filtering where available. There is also software filtering
support.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: dsahern@gmail.com
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/1431637800-31061-3-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf: add new PERF_SAMPLE_BRANCH_IND_JUMP branch sample type

This patch adds a new branch_sample_type flag to enable
filtering branch sampling to indirect jumps. The support
is subject to hardware or kernel software support on each
architecture.

Filtering on indirect jump is useful to study the targets
of the jump.

Signed-off-by: Stephane Eranian <eranian@google.com>
Signed-off-by: Peter Zijlstra (Intel) <peterz@infradead.org>
Reviewed-by: Andi Kleen <ak@linux.intel.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@redhat.com
Cc: dsahern@gmail.com
Cc: jolsa@redhat.com
Cc: kan.liang@intel.com
Cc: namhyung@kernel.org
Link: http://lkml.kernel.org/r/1431637800-31061-2-git-send-email-eranian@google.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

  - Fix 'perf probe' segfault when glob matching function without debuginfo (Wang Nan)

  - Remove newline char when reading event scale and unit (Madhavan Srinivasan)

  - Deal with kernel module names in '[]' correctly (Wang Nan)

Infrastructure changes:

  - Fix the search for the kernel DSO on the unified list (Arnaldo Carvalho de Melo)

  - Move tools/perf/util/include/linux/{kernel.h,list.h,poison.h} to tools/include,
    to be used in tools/lib/bpf/ (Wang Nan)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf tools: Deal with kernel module names in '[]' correctly

Before patch ba92732e9808 ('perf kmaps: Check kmaps to make code more
robust'), 'perf report' and 'perf annotate' will segfault if trace data
contains kernel module information like this:

# perf report -D -i ./perf.data
...
0 0 0x188 [0x50]: PERF_RECORD_MMAP -1/0: [0xffffffbff1018000(0xf068000) @ 0]: x [test_module]
...

# perf report -i ./perf.data --objdump=/path/to/objdump --kallsyms=/path/to/kallsyms

perf: Segmentation fault
-------- backtrace --------
/path/to/perf[0x503478]
/lib64/libc.so.6(+0x3545f)[0x7fb201f3745f]
/path/to/perf[0x499b56]
/path/to/perf(dso__load_kallsyms+0x13c)[0x49b56c]
/path/to/perf(dso__load+0x72e)[0x49c21e]
/path/to/perf(map__load+0x6e)[0x4ae9ee]
/path/to/perf(thread__find_addr_map+0x24c)[0x47deec]
/path/to/perf(perf_event__preprocess_sample+0x88)[0x47e238]
/path/to/perf[0x43ad02]
/path/to/perf[0x4b55bc]
/path/to/perf(ordered_events__flush+0xca)[0x4b57ea]
/path/to/perf[0x4b1a01]
/path/to/perf(perf_session__process_events+0x3be)[0x4b428e]
/path/to/perf(cmd_report+0xf11)[0x43bfc1]
/path/to/perf[0x474702]
/path/to/perf(main+0x5f5)[0x42de95]
/lib64/libc.so.6(__libc_start_main+0xf4)[0x7fb201f23bd4]
/path/to/perf[0x42dfc4]

This is because __kmod_path__parse treats '[' leading names as kernel
name instead of names of kernel module.

If perf.data contains build information and the buildid of such modules
can be found, the dso->kernel of it will be set to DSO_TYPE_KERNEL by
__event_process_build_id(), not kernel module.

It will then be passed to dso__load() -> dso__load_kernel_sym() ->
dso__load_kcore() if --kallsyms is provided.

The refered patch adds NULL pointer checker to avoid segfault. However,
such kernel modules are still processed incorrectly.

This patch fixes __kmod_path__parse, makes it treat names like
'[test_module]' as kernel modules.

kmod-path.c is also update to reflect the above changes.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1433321541-170245-1-git-send-email-wangnan0@huawei.com
[ Fixed the merged with 0443f36b0de0 ("perf machine: Fix the search
for the kernel DSO on the unified list" ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

tools: Move tools/perf/util/include/linux/{list.h,poison.h} to tools/include

This patch moves list.h from tools/perf/util/include/linux/list.h to
tools/include/linux/list.h to enable other libraries use macros in it,
like libbpf which will be introduced by further patches. Since list.h
depend on poison.h, poison.h is also moved.

Both file use relative path, so one '..' is removed for each header to
make them suit for new directory.

MANIFEST is also updated for 'make perf-*-src-pkg'.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Cc: Alexei Starovoitov <alexei.starovoitov@gmail.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1433144296-74992-3-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Move linux/kernel.h to tools/include

This patch moves kernel.h from tools/perf/util/include/linux/kernel.h
to tools/include/linux/kernel.h to enable other libraries use macros in
it, like libbpf which will be introduced by further patches.

MANIFEST is also updated for 'make perf-*-src-pkg'.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Alexei Starovoitov <ast@plumgrid.com>
Cc: Brendan Gregg <brendan.d.gregg@gmail.com>
Cc: Daniel Borkmann <daniel@iogearbox.net>
Cc: David Ahern <dsahern@gmail.com>
Cc: He Kuang <hekuang@huawei.com>
Cc: Jiri Olsa <jolsa@kernel.org>
Cc: Kaixu Xia <xiakaixu@huawei.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1433144296-74992-2-git-send-email-wangnan0@huawei.com
[ Fixed up the ifdef guard to match other entries in tools/include/linux ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf machine: Fix the search for the kernel DSO on the unified list

When unifying the user_dsos and kernel_dsos a bug was introduced by
inverting the check for dso->kernel, fix it.

Fixes: 3d39ac538629 ("perf machine: No need to have two DSOs lists")
Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-xnrnq0kams3s2z9ek1wjb506@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Remove newline char when reading event scale and unit

The <fd979c013207> commit intruduced the perf_event_sysfs_show function
to display the event_str value of an attr in kernel/event/core.c. But
the function returns the value with a newline char.

So, if a event also carries a event.unit file, when printing the counter
data perf tool formatting goes for a spin.

That is, because of the event unit, event name is printed in the newline
because of perf_event_sysfs_show returns with a newline char.

Now fixing perf core will break API, hencing proposing a fix in the perf tool.

Signed-off-by: Madhavan Srinivasan <maddy@linux.vnet.ibm.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Link: http://lkml.kernel.org/r/1433052383-21802-1-git-send-email-maddy@linux.vnet.ibm.com
[ Add spaces around operators ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Fix segfault when glob matching function without debuginfo

Commit 4c859351226c920b227fec040a3b447f0d482af3 ("perf probe: Support
glob wildcards for function name") introduces segfault problems when
debuginfo is not available:

# perf probe 'sys_w*'
  Added new events:
  Segmentation fault

The first problem resides in find_probe_trace_events_from_map(). In
that function, find_probe_functions() is called to match each symbol
against glob to find the number of matching functions, but still use
map__for_each_symbol_by_name() to find 'struct symbol' for matching
functions. Unfortunately, map__for_each_symbol_by_name() does
exact matching by searching in an rbtree.

It doesn't know glob matching, and not easy for it to support it because
it use rbtree based binary search, but we are unable to ensure all names
matched by the glob (any glob passed by user) reside in one subtree.

This patch drops map__for_each_symbol_by_name(). Since there is no
rbtree again, re-matching all symbols costs a lot. This patch avoid it
by saving all matching results into an array (syms).

The second problem is the lost of tp->realname. In
__add_probe_trace_events(), if pev->point.function is glob, the event
name should be set to tev->point.realname. This patch ensures its
existence by strdup sym->name instead of leaving a NULL pointer there.

After this patch:

# perf probe 'sys_w*'
Added new events:
   probe:sys_waitid     (on sys_w*)
   probe:sys_wait4      (on sys_w*)
   probe:sys_waitpid    (on sys_w*)
   probe:sys_write      (on sys_w*)
   probe:sys_writev     (on sys_w*)

You can now use it in all perf tools, such as:

         perf record -e probe:sys_writev -aR sleep 1

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1432892747-232506-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core improvements and fixes from Arnaldo Carvalho de Melo:

User visible changes:

  - Make Ctrl-C stop processing on TUI, allowing interrupting the load of big
    perf.data files (Namhyung Kim)

  - Fix 'perf annotate' -i option, which is currently ignored (Martin Liška)

  - Add ARM64 perf_regs_load to support libunwind and enable testing (Wang Nan)

Infrastructure changes:

  - Fix thread ref-counting in db-export (Adrian Hunter)

  - Fix compiler warning about may be accessing uninitialized (Arnaldo Carvalho de Melo)

  - No need to have two lists for user and kernel DSOs, unify them (Arnaldo Carvalho de Melo)

  - Function namespace consistency fixups (Arnaldo Carvalho de Melo)

  - Do not fail on missing Build file, fixing the build on MIPS (Jiri Olsa)

  - Fix up syscall tests, making those tests pass on ARM64 (Riku Voipio)

  - Fix 'function unused' warning in 'perf probe' (Wang Nan)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Make Ctrl-C stop processing on TUI

It was inconvenient that perf cannot be quit with SIGINT during
processing samples on TUI especially for large data files.

This was because the first argument of SLang_init_tty(), abort_char,
being 0.  The manual says it's the ascii value of the control character
that will be used to generate the interrupt signal [1].  Passing -1
means to use the default value (Ctrl-C).

However, after processing samples, Ctrl-C was used to in other cases as
well - like stepping back from annotate.  So recover the original
behavior after processing.

[1] http://jedsoft.org/slang/doc/html/cslang-6.html#ss6.1

Signed-off-by: Namhyung Kim <namhyung@kernel.org>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1432904024-13170-1-git-send-email-namhyung@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf build: Do not fail on missing Build file

Allow nesting into directories without Build file. Currently we force
include of the Build file, which fails the build when the Build file is
missing.

We already support empty *-in.o' objects if there's nothing in the
directory to be compiled, so we can just use it for missing Build file
cases.

Also adding this case under tests.

Reported-by: Rabin Vincent <rabin.vincent@axis.com>
Signed-off-by: Jiri Olsa <jolsa@kernel.org>
Cc: David Ahern <dsahern@gmail.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Rabin Vincent <rabin.vincent@axis.com>
Link: http://lkml.kernel.org/r/1432914178-24086-1-git-send-email-jolsa@kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf machine: Fix up vdso methods names

To make it consistent with the other dso lifetime routines.

For instance:

struct dso *vdso__new(struct machine *machine, const char *short_name,
        const char *long_name)

Becomes:

struct dso *machine__addnew_vdso(struct machine *machine, const
  char *short_name, const char *long_name)

Because:

1) There is no 'struct vdso' for us to have vdso__ prefixed routines.

2) Because it will not really just create a new instance of 'struct
   dso', it'll call dso__new() but it will also insert it into the
   DSO's list/rbtree, and we have a method name for that: 'addnew',
   just like we have dsos__addnew().

3) So it is really a 'struct machine' operation, it is the first
   argument, etc.

This way the place where this is used gets consistent:

                if (vdso) {
                        pgoff = 0;
-                       dso = vdso__dso_findnew(machine, thread);
+                       dso = machine__findnew_vdso(machine, thread);
                } else
                        dso = machine__findnew_dso(machine, filename);

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-r3w3tvh8exm9xfz3p4tz9qbz@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf machine: Introduce machine__findnew_dso() method

Similar to machine__findnew_thread(), also prepping for refcounting and
locking, this time for struct dso instances.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-fv3tshv5o1413coh147lszjc@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf machine: No need to have two DSOs lists

We can, given a DSO, figure out if it is a kernel, a kernel module or
a userlevel DSO, so stop having to process two lists in several
functions.

If searching becomes an issue at some point, we can have them in a
rbtree, etc.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-s4yb0onpdywu6dj2xl9lxi4t@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf machine: Adopt findnew_kernel method

It never was a 'struct dso' method, so fix that by rename
dso__kernel_findnew() to machine__findnew_kernel().

At some point I'll move it all to the machine.[ch] files, for now
lets ease patch review by not moving too much stuff.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: David Ahern <dsahern@gmail.com>
Cc: Don Zickus <dzickus@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Link: http://lkml.kernel.org/n/tip-zrxmblgsg5vx0iv4rhvq2f6l@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Remove getpgrp from mmap-basic

mmap-basic fails on arm64.

4: read samples using the mmap interface: read samples using the mmap interface: FAILED!

This is because arm64 doesn't come with getpgrp() syscall. The syscall
is a BSD compatibility wrapper, Archs that don't define
__ARCH_WANT_SYS_GETPGRP do not have this. Remove it, since getpgid is
already used in the testcase.

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429192375-13706-4-git-send-email-riku.voipio@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Aename open*.c to openat*.c

Since the test being tested is now openat rather than open, rename the
files to make it explicit. The patch is separeted from the first to make
it simpler to deal with any potential conflicts in the Makefile

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429192375-13706-3-git-send-email-riku.voipio@linaro.org
[ Fixed it up wrt Build files ]
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tests: Switch from open to openat

Multiple perf tests fail on arm64 due to missing open syscall:

2: detect open syscall event : FAILED!

open(2) is a legacy syscall, replaced with openat(2) since 2.6.16. Thus
new architectures in kernel, such as arm64, don't implement these legacy
syscalls.

The patch replaces all sys_enter_open events with sys_enter_openat,
renames the related tests and test output to avoid confusion.

Signed-off-by: Riku Voipio <riku.voipio@linaro.org>
Reviewed-by: Ingo Molnar <mingo@kernel.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1429192375-13706-2-git-send-email-riku.voipio@linaro.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf tools: Add ARM64 perf_regs_load to support libunwind and enable testing

Newest libunwind does support ARM64, and perf is able to utilize it
also.

This patch enables the perf test dwarf unwind for arm64.

Test result:
# ./perf test unwind
25: Test dwarf unwind : Ok

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Jiri Olsa <jolsa@kernel.org>
Cc: Namhyung Kim <namhyung@kernel.org>
Cc: Zefan Li <lizefan@huawei.com>
Link: http://lkml.kernel.org/r/1427461681-72971-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf kmem: Fix compiler warning about may be accessing uninitialized variable

The last argument to strtok_r doesn't need to be initialized, its just a
placeholder to make this routine reentrant, but gcc doesn't know about
that and complains, breaking the build, fix it by setting it to NULL.

Cc: Adrian Hunter <adrian.hunter@intel.com>
Cc: David Ahern <dsahern@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Namhyung Kim <namhyung@kernel.org>
Link: http://lkml.kernel.org/n/tip-8e8rgbg3aom9uarsyqjrsctg@git.kernel.org
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf db-export: Fix thread ref-counting

Thread ref-counting was not done for get_main_thread() meaning that
there was a thread__get() from machine__find_thread() that was not being
paired with thread__put(). Fix that.

Signed-off-by: Adrian Hunter <adrian.hunter@intel.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Link: http://lkml.kernel.org/r/1432906425-9911-2-git-send-email-adrian.hunter@intel.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf probe: Fix 'function unused' warning

By 'make build-test' a warning is found in probe-event.c that, after
commit 419e873828 (perf probe: Show the error reason comes from
invalid DSO) the only user of kernel_get_module_dso() is
open_debuginfo(). Which is not compiled if HAVE_DWARF_SUPPORT not set.

'make build-test' found this problem when make_minimal.

This patch moves kernel_get_module_dso() to HAVE_DWARF_SUPPORT ifdef
section.

Signed-off-by: Wang Nan <wangnan0@huawei.com>
Acked-by: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Zefan Li <lizefan@huawei.com>
Cc: pi3orama@163.com
Link: http://lkml.kernel.org/r/1432779905-206143-1-git-send-email-wangnan0@huawei.com
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

perf annotate: Fix -i option, which is currently ignored.

Assign input_name, received from program arguments, to file data
structure.

Signed-off-by: Martin Liska <mliska@suse.cz>
Tested-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/55685654.2010209@suse.cz
Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>

Merge tag 'perf-core-for-mingo' of git://git./linux/kernel/git/acme/linux into perf/core

Pull perf/core refactorings and improvements from Arnaldo Carvalho de Melo:

User visible changes:

  - Add hint for 'Too many events are opened.' error message (Jiri Olsa)

Infrastructure changes:

  - Protect accesses to map rbtrees with a lock and refcount struct map,
    reducing memory usage as maps not used get freed. The 'dso' struct is
    next in line. (Arnaldo Carvalho de Melo)

  - Annotation and branch related option parsing refactorings to
    share code with upcoming patches (Andi Kleen)

Signed-off-by: Arnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: Ingo Molnar <mingo@kernel.org>

perf: Remove myself from MAINTAINERS entry

I haven't been working on perf for a while, so remove my name
from the MAINTAINERS entry for it.

Signed-off-by: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Link: http://lkml.kernel.org/r/20150528061757.GB27903@iris.ozlabs.ibm.com
Signed-off-by: Ingo Molnar <mingo@kernel.org>