Daniel F. Dickinson [Wed, 25 Jul 2018 23:07:21 +0000 (19:07 -0400)]
ar71xx: cr5000: use correct company name
It's 'PowerCloud Systems' not just 'PowerCloud'
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Daniel F. Dickinson [Sat, 21 Jul 2018 01:04:56 +0000 (21:04 -0400)]
ar71xx: cr5000: Drop support for defunct cloud
The Skydog cloud service no longer exists hence supporting going back
to stock firmware with cloud support is no longer applicable.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Daniel F. Dickinson [Sat, 21 Jul 2018 01:03:27 +0000 (21:03 -0400)]
ar71xx: cr5000: Tweak switch LED settings
This is basically cosmetic and sets the Port 1-4 LEDs to blink on
10/100/1000M.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Daniel F. Dickinson [Sat, 21 Jul 2018 01:01:23 +0000 (21:01 -0400)]
ar71xx: cr5000: Fix the reset button as KEY_RESTART
The reset button was incorrectly returning KEY_WPS_BUTTON as the key
code. We want KEY_RESTART., so make that fix.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Daniel F. Dickinson [Sat, 21 Jul 2018 00:59:40 +0000 (20:59 -0400)]
ar71xx: cr5000: board data: Use better macro name
The PCIe wireless MAC address address is better labelled as WMAC
than MAC to emphasize that it is for a wireless interface.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Daniel F. Dickinson [Sat, 28 Jul 2018 12:52:39 +0000 (08:52 -0400)]
ath79: Port PowerCloud Systems CAP324 support
The CAP324 was an AP for a NaaS offering that is now defunct. While
previously supported in the ar71xx arch, there were some errata (to
be fixed shortly).
Notable differences from ar71xx support:
1) The method of getting the ath9k firmware for the PCIe 2ghz wifi has
changed (due to changes in how the arch handles this), since this device
doesn't use the EEPROM except to get the MAC address of the wifi.
2) /etc/config/wireless will need to be regenerated as the path(s) to
the wireless device(s) have changed.
3) ath79 OpenWrt firmware no longer supports build an image that allows
reverting to stock firmware (as the cloud service no longer exists, the
stock firmware is useless), instead using all of the flash for image and
overlay (less u-boot/env and art).
4) Initial network config treats the ethernet port as a Lan port with
the standard default address (192.168.1.1 unless changed in .config
--e.g. via menuconfig) instead of using DHCP (this was the default for
the stock firmware, however for openwrt use this is rather confusion and
counter-productive as the user has a harder time finding the device on
the network.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Daniel F. Dickinson [Fri, 20 Jul 2018 20:52:46 +0000 (16:52 -0400)]
ath79: Port PowerCloud Systems CR5000 support
Add ath79 arch support for PowerCloud Systems CR5000. Previously
supported under ar71xx (however there are some errors in that support;
to be fixed shortly).
Info:
* This board is based on the Atheros DB120 reference design, but doesn't
use the on-board switch. Instead it attachs GMAC0 to an AR8327 switch.
* It only uses GMAC0 and the WAN is simply a VLAN in the stock firmware.
* It has 64MB RAM and 8MB flash.
* In the dts version we get rid of using 'open-drain' for the AR8327
LED controls.
* As with the platform data version we disable JTAG as this conflicts
with one of the pair of GPIO's required for the power/status LED
(GPIO2 and GPIO4 are used for this LED).
* The pcie card wifi has an EEPROM but gets it's MAC address from
the ART partition.
* The SoC wifi (2.4 GHz) is all from the ART.
* The USB is support comes from the SoC.
NB. This is actually an AR9342 rather than AR9344 but we use the 9344
definitions because there are no relevant differences for this board.
NB: Building only images that don't support reverting to the old
cloud-based firmware as the Skydog cloud service for the CR5000 no
longer exists.
Signed-off-by: Daniel F. Dickinson <cshored@thecshore.com>
Nick Hainke [Wed, 25 Jul 2018 18:16:13 +0000 (20:16 +0200)]
iwinfo: update to version 2018-07-24
Update to new iwinfo version.
Adds support for channel survey.
Adds ubus support.
Etc.
Signed-off-by: Nick Hainke <vincent@systemli.org>
Edi Turn [Mon, 23 Jul 2018 14:08:18 +0000 (22:08 +0800)]
grub2: fix packed-not-aligned error on GCC 8
Fix the compile error "packed-not-aligned" when using GCC 8.
Signed-off-by: Edi Turn <yyxstter@gmail.com>
Daniel Engberg [Fri, 27 Jul 2018 10:23:40 +0000 (12:23 +0200)]
treewide: Bump PKG_RELEASE due to mbedtls update
Bump PKG_RELEASE on packages that depends on (lib)mbedtls to avoid library
mismatch.
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Fri, 27 Jul 2018 10:16:29 +0000 (12:16 +0200)]
mbedtls: Update to 2.12.0
Update mbedtls to 2.12.0
Multiple security fixes
Add support for Chacha20 and Poly1305 cryptographic primitives and their
associated ciphersuites
Difference in size on mips_24kc (ipk):
164kbytes (167882 bytes)
170kbytes (173563 bytes)
https://tls.mbed.org/tech-updates/releases/mbedtls-2.12.0-2.7.5-and-2.1.14-released
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Fri, 20 Jul 2018 18:29:47 +0000 (20:29 +0200)]
toolchain/binutils: Add binutils 2.31.1
Add binutils 2.31.1 to repo
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Thibaut VARÈNE [Sun, 29 Jul 2018 10:15:00 +0000 (12:15 +0200)]
ar71xx: improve MikroTik wAP R support
81d446b045176e3e25bb0ef74e3d060b51a0a353 introduced incomplete
support for this device.
This patch attempts to correct the situation based on OEM source
code.
LED1-3 are GSM mode on OFW (2G/3G/4G) hence unassigned here.
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Tested-by: David Ehrmann <ehrmann@gmail.com>
Thibaut VARÈNE [Sun, 29 Jul 2018 10:14:59 +0000 (12:14 +0200)]
ar71xx: add missing diag LED support for RB wAP 2nD
3b15eb06c366cf3805590a61f22e966a95bf8101 did not include diag.sh
edit
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Thibaut VARÈNE [Sun, 29 Jul 2018 10:14:58 +0000 (12:14 +0200)]
ar71xx: rbspi: mark rb911L user led as active low
The active_low flag was missing for the user LED. This LED is open drain
(confirmed in OEM source) and open drain only makes sense for active low
GPIOs.
The two wireless LEDs mentioned in the comments are also #defined for
future reference.
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Tested-by: Ryan Mounce <ryan@mounce.com.au>
Thibaut VARÈNE [Sun, 29 Jul 2018 10:14:57 +0000 (12:14 +0200)]
ar71xx: rbspi: fix RB wAP AC gpio conflict and LED
e15c63a37574bd15ce3a6636c2f04741ab76f7b9 introduced code that was trying
to register GPIO 1 as both an LED and a button. The OEM source makes it
clear that LED1 is not wired to the SoC GPIOs. GPIO 1 is the reset button.
Furthermore the (green) power led default state should also be defined,
(matching OEM source), and it should be used by diag.sh since it's
currently the only software-controllable LED.
This patch fixes these issues and renames the corresponding #defines for
clarity
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Thibaut VARÈNE [Sun, 29 Jul 2018 10:14:56 +0000 (12:14 +0200)]
ar71xx: rbspi: clarify USB power gpios action
The gpios that control power toggle for USB on the RouterBOARD devices
are active low _off_ switches.
When they are active (low), power is off. When they are inactive
(high), power is on.
Rename GPIO defines, set gpios to GPIOF_ACTIVE_LOW for consistency and
reflect their true action in the display name. This brings openwrt code
in line with OEM.
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Tested-by: Ryan Mounce <ryan@mounce.com.au>
Rosen Penev [Sun, 29 Jul 2018 17:02:08 +0000 (10:02 -0700)]
admswconfig: Remove dead URL + HTTPS
Found using uscan.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rafał Miłecki [Mon, 30 Jul 2018 06:38:30 +0000 (08:38 +0200)]
kernel: add DT binding support to the mtd redboot parser
It allows using that parser with the "compatible" set in DT.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Christian Lamparter [Sun, 29 Jul 2018 09:55:17 +0000 (11:55 +0200)]
apm821xx: clean up gpio-hogs
convert the usb and both sata port power related gpio-hogs to
what they really are: fixed-regulators.
The ethernet phy-reset gpio-hog is replaced by a proper
upstream (4.15+) reset-gpios property in the mdio-node.
So this will work eventually.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Christian Lamparter [Sun, 29 Jul 2018 09:55:16 +0000 (11:55 +0200)]
apm821xx: split MBL's rootfs.img.gz into a sysupgrade and factory image
@vahid-dan reported a issue with extracting the rpi images with
Gnome's Archive Manager:
"Ubuntu Archive Manager cannot extract the file and it just
throws a general error message: "An error occurred while
extracting files".
<https://forum.lede-project.org/t/corrupted-pre-built-v18-06-0-rc2-image-for-rpi>
The MBL's rootfs.img.gz image is generated in much the same way.
Hence this patch preemptively splits the rootfs.img.gz image into
a sysupgrade and a factory image.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Christian Lamparter [Sun, 29 Jul 2018 09:55:15 +0000 (11:55 +0200)]
apm821xx: build squashfs-rootfs images for the MBL
This patch adds support for squashfs as the root filesystem.
advantages:
- migrate from a existing -ext4 installation and back
with the sysupgrade utility
- existing partition layout will not be lost during switch
- slightly smaller image size as compared to the -ext4 image.
disadvantages:
- needs f2fs + tools. This is because fstools rootdisk.c decides based
on the partition size (currently root partitions > 100 MiB) f2fs is
used as the rootfs_data filesystem.
- rootfs_data is placed into the rootfs partition after the squashfs.
This makes it difficult for tools that expect a /dev/sda${X} device.
It also makes it difficult for data recovery tools as they might not
expect to find a embedded partition or will be slightly confused.
... or will not support f2fs.
For people with existing build configurations: make sure to include mkf2fs
and f2fsck packages into the image. Otherwise the new -squashfs image will
only boot from the ram-overlay.
Note:
All overlay data (configurations/all installed packages/...) will be
placed in inside the rootfs partition (i.e. /dev/sda2) just after the
squashfs image.
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Christian Lamparter [Sun, 29 Jul 2018 09:55:14 +0000 (11:55 +0200)]
brcm2708: split sdcard.img.gz into a sysupgrade and factory image
@vahid-dan reported a issue with extracting the rpi images with
Gnome's Archive Manager:
"Ubuntu Archive Manager cannot extract the file and it just
throws a general error message: "An error occurred while
extracting files".
<https://forum.lede-project.org/t/corrupted-pre-built-v18-06-0-rc2-image-for-rpi>
@blogic told me to split the single sdcard.img.gz for the RPi
into a sysupgrade and a factory image for all brcm2708 targets.
The factory images will have no metadata attached, this way
these utilities that can't deal with the attached metadata will
not fail for no reason.
Cc: John Crispin <john@phrozen.org>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Christian Lamparter [Sun, 29 Jul 2018 09:55:13 +0000 (11:55 +0200)]
ipq-wifi: add a note / reminder about upstreaming new board files
|Please send a mail with your device-specific board files upstream.
|You can find instructions and examples on the linux-wireless wiki:
|<https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Jonas Gorski [Sun, 29 Jul 2018 11:09:22 +0000 (13:09 +0200)]
brcm63xx: drop linux,part-probe usage where possible
It was present as 4.4 compatibility, but since we now use 4.9 or later
with the new upstream solution, we don't need it anymore.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Jonas Gorski [Sun, 29 Jul 2018 10:53:49 +0000 (12:53 +0200)]
brcm63xx: drop own implementation of DT partitions in favour of upstream
The binding works the same, so we can just drop the revert and the patch.
Signed-off-by: Jonas Gorski <jonas.gorski@gmail.com>
Rosen Penev [Sun, 29 Jul 2018 07:35:58 +0000 (00:35 -0700)]
thc-ipv6: Update URLs
Development has moved to GitHub. Found using UScan.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rosen Penev [Sun, 29 Jul 2018 07:26:29 +0000 (00:26 -0700)]
libjson-c: Update package URL
Found through UScan.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Rafał Miłecki [Sun, 29 Jul 2018 09:01:14 +0000 (11:01 +0200)]
bcm53xx: revert SPI controller commit breaking flash reads
That upstream commit caused instability in flash reads. It was reported
but there isn't any proper fix as for now.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Daniel Engberg [Sun, 22 Jul 2018 16:31:38 +0000 (18:31 +0200)]
tools/cmake: Update to 3.12.0
Update cmake to 3.12.0
Remove 140-curl-fix-libressl.patch as fix is in upstream
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Rafał Miłecki [Sat, 28 Jul 2018 19:46:40 +0000 (21:46 +0200)]
bcm53xx: backport BCM5301X/BCM53573 dts commits from 4.19+
This includes Linksys EA9500 support, BCM53573 timer fix and
upstream-ready partitions patch that replaces two downstream hacks.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Sat, 28 Jul 2018 19:37:46 +0000 (21:37 +0200)]
bcm53xx: switch USB 3.0 PHY DT description to use MDIO bus
USB 3.0 PHY is attached to the MDIO bus and should be supported
(accessed) as a MDIO device. This wasn't known initially which resulted
in writing driver that was working with MDIO bus (using some magic
values) without knowing it.
This commit updates DT to properly describe MDIO & USB 3.0 PHY and
enables required kernel drivers.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Sat, 28 Jul 2018 19:35:23 +0000 (21:35 +0200)]
bcm53xx: backport DT fix for I2C controller interrupt
Specified interrupt type was incorrect.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Dmitry Tunin [Sat, 28 Jul 2018 14:06:28 +0000 (17:06 +0300)]
igmpproxy: add a silent logging option
[0-3](none, minimal[default], more, maximum)
It is not 100% backward compatible, because now 0 disables logging
Signed-off-by: Dmitry Tunin <hanipouspilot@gmail.com>
Kevin Darbyshire-Bryant [Sat, 28 Jul 2018 09:47:32 +0000 (10:47 +0100)]
dnsmasq: bump to dnsmasq v2.80test3
Refresh patches
Upstream commits since last bump:
3b6eb19 Log DNSSEC trust anchors at startup.
f3e5787 Trivial comment change.
c851c69 Log failure to confirm an address in DHCPv6.
a3bd7e7 Fix missing fatal errors when parsing some command-line/config options.
ab5ceaf Document the --help option in the french manual
1f2f69d Fix recurrent minor spelling mistake in french manual
f361b39 Fix some mistakes in french translation of the manual
eb1fe15 When replacing cache entries, preserve CNAMES which target them.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Rafał Miłecki [Fri, 27 Jul 2018 19:54:08 +0000 (21:54 +0200)]
kernel: backport mtd support for subpartitions in DT
This is a new & warm feature that allows nesting partiitons in DT and
mixing their types (e.g. static vs. dynamic). It's very useful for
boards that have most partitions static but some of them require extra
parsing (e.g. a "firmware" partition).
It's required to successfully backport support for new devices using
that new syntax in their DT files.
Since brcm63xx has a custom alternative patch the upstream one is being
reverted for it. The plan is to make brcm63xx use the upstream
implementation.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 27 Jul 2018 13:57:13 +0000 (15:57 +0200)]
brcm47xx: revert upstream commit breaking BCM4718A1
This fixes kernel hang when booting on BCM4718A1 (& probably BCM4717A1).
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Fri, 27 Jul 2018 13:51:53 +0000 (15:51 +0200)]
kernel: backport mtd patches with Broadcom of_match_table-s
Two tiny & trivial patches with no regression risk. One simplifies
bcm53xx downstream patch.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Daniel Golle [Fri, 27 Jul 2018 10:50:35 +0000 (12:50 +0200)]
util-linux: package blockdev executable
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
Masashi Honma [Tue, 17 Jul 2018 23:40:33 +0000 (08:40 +0900)]
wwan: Fix teardown for sierra_net driver
The sierra_net driver is using proto_directip_setup for setup. So use
proto_directip_teardown for teardown.
Signed-off-by: Masashi Honma <masashi.honma@gmail.com>
Syrone Wong [Thu, 26 Jul 2018 14:46:39 +0000 (22:46 +0800)]
ead: use new protocol setting API since libpcap 1.9.0
Dropped the protocol API specific symbol: HAS_PROTO_EXTENSION and
switch to the official API
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
Syrone Wong [Thu, 26 Jul 2018 14:46:38 +0000 (22:46 +0800)]
libpcap: update to 1.9.0
001-Fix-compiler_state_t.ai-usage-when-INET6-is-not-defi.patch dropped due to upstream
002-Add-missing-compiler_state_t-parameter.patch dropped due to upstream
202-protocol_api.patch dropped due to implemented upstream by another way
upstream commit: https://github.com/the-tcpdump-group/libpcap/commit/
55c690f6f834b4762697d7a134de439c9096c921
and renamed via: https://github.com/the-tcpdump-group/libpcap/commit/
697b1f7e9b1d6f5a5be04f821d7c5dc62458bb3b
ead is the only user who use the protocol api, we have to use the new api since libpcap 1.9.0
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
Rafał Miłecki [Thu, 26 Jul 2018 21:20:30 +0000 (23:20 +0200)]
mac80211: brcmfmac: backport 4.19 patches preparing monitor mode support
Monitor mode isn't supported yet with brcmfmac, it's just an early work.
This also prepares brcmfmac to work stable with new firmwares which use
updated struct for passing STA info.
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Rafał Miłecki [Thu, 26 Jul 2018 20:43:18 +0000 (22:43 +0200)]
mac80211: backport brcmfmac fixes & debugging helpers from 4.18
The most important is probably regression fix in handling platform
NVRAM. That bug stopped hardware from being properly calibrated breaking
e.g. 5 GHz for Netgear R8000.
Other than that it triggers memory dumps when experiencing firmware
problems which is important for debugging purposes.
Fixes: 7e8eb7f309a8 ("mac80211: backport brcmfmac firmware & clm_blob loading rework")
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
Jo-Philipp Wich [Thu, 26 Jul 2018 14:48:07 +0000 (16:48 +0200)]
ubus: update to latest git HEAD
40e0931 libubus: pass an empty UBUS_ATTR_DATA block if msg is NULL on invoke
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Thu, 26 Jul 2018 12:53:05 +0000 (14:53 +0200)]
odhcpd: update to latest git HEAD
44cce31 ubus: avoid dumping interface state with NULL message
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Thu, 26 Jul 2018 06:44:53 +0000 (08:44 +0200)]
firewall: update to latest git HEAD
aa8846b ubus: avoid dumping interface state with NULL message
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
John Crispin [Wed, 25 Jul 2018 10:15:45 +0000 (12:15 +0200)]
ubus: update to latest git HEAD
884be45 libubus: check for non-NULL data before running callbacks
Signed-off-by: John Crispin <john@phrozen.org>
John Crispin [Wed, 25 Jul 2018 10:03:18 +0000 (12:03 +0200)]
libubox: update to latest git HEAD
c83a84a fix segfault when passed blobmsg attr is NULL
Signed-off-by: John Crispin <john@phrozen.org>
John Crispin [Tue, 24 Jul 2018 14:04:44 +0000 (16:04 +0200)]
ipq40xx: move essedma patches into same range
Signed-off-by: John Crispin <john@phrozen.org>
John Crispin [Tue, 24 Jul 2018 12:34:34 +0000 (14:34 +0200)]
ipq40xx: sync kernel config
Signed-off-by: John Crispin <john@phrozen.org>
John Crispin [Tue, 24 Jul 2018 12:38:57 +0000 (14:38 +0200)]
ipq40xx: use patches that were sent upstream
Signed-off-by: John Crispin <john@phrozen.org>
John Crispin [Tue, 24 Jul 2018 14:02:20 +0000 (16:02 +0200)]
ipq40xx: move dts file patches to end of series
Signed-off-by: John Crispin <john@phrozen.org>
John Crispin [Tue, 24 Jul 2018 12:34:01 +0000 (14:34 +0200)]
ipq40xx: cleanup USB support
remove the 2 USB PHY drivers and add a generic PHY driver instead
Signed-off-by: John Crispin <john@phrozen.org>
John Crispin [Tue, 24 Jul 2018 12:41:02 +0000 (14:41 +0200)]
ipq40xx: drop no-op cpu_idle symbol patch
Signed-off-by: John Crispin <john@phrozen.org>
David Bauer [Fri, 20 Jul 2018 22:04:08 +0000 (00:04 +0200)]
ath79: fix OCEDO Raccoon
The OCEDO Raccoon only has one ethernet port, but currently uci sections
for WAN and LAN are created.
Additionally, newer versions of the devices U-Boot (units with SteelWRT)
set the kernel-cmdline and therefore overwrite the partition-layout.
We fix this by overwriting the cmdline supplied by the bootloader.
Signed-off-by: David Bauer <mail@david-bauer.net>
Mathias Kresin [Mon, 23 Jul 2018 05:57:45 +0000 (07:57 +0200)]
ramips: remove stale get_status_led call
The get_status_led() function was removed due to the convertion to dts
alias based status led.
Since we don't need the boardname any longer, the functions.sh include
isn't required any more.
Fixes: c9c4b2116c09 ("ramips: Use dts alias based status led")
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sun, 8 Jul 2018 21:18:15 +0000 (23:18 +0200)]
kernel: don't auto attach ubi on read error
With
a10a204aab26cc ("kernel: make ubi auto-attach check for a tar file
magic") the check for the magic was added without considering a failing
mtd_read(). If the read fails, no check is done and the mount code is
called straight away.
Failing with an error message for such cases seems to me the cleaner way,
as it would allow to spot hidden/workaround issues.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sat, 7 Jul 2018 23:47:28 +0000 (01:47 +0200)]
kernel: handle bad blocks in ubi auto attach code
The first block(s) of the ubi mtd device might be bad. We need to take
care on our own to skip the bad block(s) and read the next one(s).
Don't treat recoverable read errors as fatal and check for the UBI magic
if the data of a block could be recovered using ECC or similar.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Sat, 7 Jul 2018 23:38:08 +0000 (01:38 +0200)]
kernel: improve ubi auto attach code readability
Move the put_mtd_device() called on multiple error conditions to a goto
label to use it later for more error conditions.
The early return on failed open of the mtd device and mismatching mtd
type allows to get rid of one level of indentation. By jumping to the
cleanup code, a refcount bug is fixed for the wrong flash type condition.
While at it, make clear that we only check for the UBI magic if the read
from flash was successful.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Ted Hess [Tue, 24 Jul 2018 18:32:20 +0000 (14:32 -0400)]
elfutils: Copy missing libraries to staging and packages
Newer shared libraries seem to have the package version as part of their name.
E.g.: libelf-0.173.so
Signed-off-by: Ted Hess <thess@kitschensync.net>
Daniel Engberg [Tue, 24 Jul 2018 11:59:30 +0000 (13:59 +0200)]
utils/curl: Disable libpsl
Disabled libpsl to fix build issue reported by buildbots
Package libcurl is missing dependencies for the following libraries:
libpsl.so.5
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Jo-Philipp Wich [Tue, 24 Jul 2018 13:23:05 +0000 (15:23 +0200)]
build: do not override CCACHE_DIR when ccache is disabled
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Tue, 24 Jul 2018 11:36:28 +0000 (13:36 +0200)]
build: prereq-build.mk: fix gcc/g++ SetupHostCommand invocation
A missing comma caused the first command option to be considered part of
the error message.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
John Crispin [Tue, 24 Jul 2018 07:35:16 +0000 (09:35 +0200)]
ipq40xx: drop bus driver, its a no-op and only does lots of alloc/free
Signed-off-by: John Crispin <john@phrozen.org>
Aleksandr V. Piskunov [Sun, 1 Jul 2018 12:40:31 +0000 (15:40 +0300)]
wireguard-tools: add wireguard_watchdog script
This watchdog script tries to re-resolve hostnames for inactive WireGuard peers.
Use it for peers with a frequently changing dynamic IP.
persistent_keepalive must be set, recommended value is 25 seconds.
Run this script from cron every minute:
echo '* * * * * /usr/bin/wireguard_watchdog' >> /etc/crontabs/root
Signed-off-by: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com>
[bump the package release]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Ansuel Smith [Sun, 8 Jul 2018 14:04:15 +0000 (16:04 +0200)]
mac80211: backport and update patches for ath10k
This commit refreshes and updates the VHT160 ath10k support fix patches
and adds a number of backports from ath-next:
*
8ed05ed06fca ath10k: handle tdls peer events
*
229329ff345f ath10k: wmi: modify svc bitmap parsing for wcn3990
*
14d65775687c ath10k: advertise TDLS wider bandwidth support for 5GHz
*
bc64d05220f3 ath10k: debugfs support to get final TPC stats for 10.4 variants
*
8b2d93dd2261 ath10k: Fix kernel panic while using worker (ath10k_sta_rc_update_wk)
*
4b190675ad06 ath10k: fix kernel panic while reading tpc_stats
*
be8cce96f14d ath10k: add support to configure channel dwell time
*
f40105e67478 ath: add support to get the detected radar specifications
*
6f6eb1bcbeff ath10k: DFS Host Confirmation
*
260e629bbf44 ath10k: fix memory leak of tpc_stats
*
38441fb6fcbb ath10k: support use of channel 173
*
2e9bcd0d7324 ath10k: fix spectral scan for QCA9984 and QCA9888 chipsets
Signed-off-by: Ansuel Smith <ansuelsmth@gmail.com>
[move backported patches in the 3xx number space, bring in upstream order,
replace incomplete patch files with git format-patch ones, rewrite commit
message, fix subject]
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jason A. Donenfeld [Wed, 18 Jul 2018 23:36:33 +0000 (01:36 +0200)]
wireguard: bump to 0.0.
20180718
80b41cd version: bump snapshot
fe5f0f6 recieve: disable NAPI busy polling
e863f40 device: destroy workqueue before freeing queue
81a2e7e wg-quick: allow link local default gateway
95951af receive: use gro call instead of plain call
d9501f1 receive: account for zero or negative budget
e80799b tools: only error on wg show if all interfaces failk
Signed-off-by: Jason A. Donenfeld <Jason@zx2c4.com>
[Added commit log to commit description]
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Felix Fietkau [Thu, 19 Jul 2018 15:13:25 +0000 (17:13 +0200)]
hostapd: remove unused struct hostapd_ubus_iface
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Syrone Wong [Thu, 21 Jun 2018 15:08:11 +0000 (23:08 +0800)]
rules.mk: replace iremap when using GCC 8
The original -iremap is replaced by -fmacro-prefix-map in GCC 8
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
Syrone Wong [Thu, 21 Jun 2018 15:08:10 +0000 (23:08 +0800)]
toolchain/gcc: add GCC 8.1.0
Changes compared to GCC 7.x
001-revert_register_mode_search.patch dropped
The underlying issue is described at the end of
https://gcc.gnu.org/bugzilla/show_bug.cgi?id=58139
It is fixed by the upstream commit:
https://github.com/gcc-mirror/gcc/commit/
3fa2798aa887d141d86985240f03e2f3809e7e62
020-PR-libstdc-81797-Add-.NOTPARALLEL-to-include-Makefil.patch dropped due to already upstream
100-PR-rtl-optimization-83496.patch dropped due to already upstream
910-mbsd_multi.patch
modified to fix ambiguous overloaded inform() call error
gcc/input.h
header: define UNKNOWN_LOCATION ((source_location) 0)
- inform (0, "someone does not honour COPTS correctly, passed %d times",
- honour_copts);
+ inform (UNKNOWN_LOCATION, "someone does not honour COPTS correctly, passed %d times",
+ honour_copts);
940-no-clobber-stamp-bits.patch dropped due to fixed upstream by another way
upstream commit: https://github.com/gcc-mirror/gcc/commit/
87b2d547f8ac9778d66909b8726fe967d1efbc74
950-cpp_file_path_translation.patch dropped, Both -fmacro-prefix-map and -ffile-prefix-map are added
to gcc 8.1.0, if I understand it correctly, we should use -fmacro-prefix-map
usage: -fmacro-prefix-map=@var{old}=@var{new}
upstream commit: https://github.com/gcc-mirror/gcc/commit/
859b51f83662d01e4f158ea9327db9ca37fe70b3
-iremap exists as a flag for a long time, for backward compatibility, I think we should keep the
variable name unchanged but change its value in rules.mk for gcc 8.x and higher.
Compile and run tested on x86_64
Signed-off-by: Syrone Wong <wong.syrone@gmail.com>
Felix Fietkau [Sun, 22 Jul 2018 15:05:09 +0000 (17:05 +0200)]
kernel: backport a change to 4.9 which disables overly aggressive warnings on gcc 8
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Felix Fietkau [Sun, 22 Jul 2018 14:52:44 +0000 (16:52 +0200)]
kernel: backport fixes for GCC 8 errors in syscall definitions
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Jo-Philipp Wich [Sat, 21 Jul 2018 18:47:10 +0000 (20:47 +0200)]
build: do not alter global default package selection from profiles
This partly reverts
ca32373c951c651f4fe5d8f99ddeb8d4f20bbe3e which lets
profiles that suppress packages to alter the package selection for all
devices of the target when building with CONFIG_TARGET_PER_DEVICE_ROOTFS.
In particular, this caused the brcm47xx Edimax PS-1208MFG profile to
disable mtd, dropbear, firewall and other essential packages for all
brcm47xx/generic builds.
To solve this problem, prevent profiles from mangling the global
DEFAULT_PACKAGES selection and restrict the supression of negated
packages to the local PACKAGE variable list only.
Fixes
ca32373c95 ("target.mk: let profile remove from DEFAULT_PACKAGES")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Kevin Darbyshire-Bryant [Fri, 20 Jul 2018 11:47:35 +0000 (12:47 +0100)]
iproute2: tc: backport canonical cake support
iproute2's tc was updated to support the recently upstreamed cake qdisc.
Backport this canonical support from upstream into iproute2 v4.17
There is no kernel kmod/userspace tc ABI change in this release from the
previous package bump, so everyone can breath a sigh of relief.
This is largely a code style change, the exception to prove the rule:
option 'autorate_ingress' has been changed to 'autorate-ingress' to fit
in with upstream option naming expectations.
No openwrt package (e.g. sqm-scripts) has knowledge of
'autorate_ingress' thus only users who made their own scripts or used
it within the 'dangerous configuration' options of sqm-scripts will be
affected.
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Felix Fietkau [Fri, 20 Jul 2018 08:40:43 +0000 (10:40 +0200)]
build: fix compile error when a package includes itself in PROVIDES
Signed-off-by: Felix Fietkau <nbd@nbd.name>
Rosen Penev [Mon, 16 Jul 2018 18:17:08 +0000 (11:17 -0700)]
ipq806x: dts: Remove device_type = "ethernet-phy"
device_type is deprecated. Upstream doesn't seem to like it either.
Signed-off-by: Rosen Penev <rosenp@gmail.com>
Christian Lamparter [Mon, 16 Jul 2018 20:56:36 +0000 (22:56 +0200)]
apm821xx: unify My Book Live Single + Duo images
By takimata:
"Come to think of it, an MBL Single board boots up just fine on an
MBL Duo image, and the MBL Single board identifies completely
identical to the MBL Duo
(Board: Apollo-3G - APM82181 Board, 2*SATA, 1*USB).
I wonder if there is any downside to just using the MBL Duo firmware
on a MBL Single. I wonder if the two firmwares could even be unified."
<https://forum.lede-project.org/t/wd-mybook-live-duo-two-disks/16195/9>
Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
Thibaut VARÈNE [Thu, 19 Jul 2018 16:06:21 +0000 (18:06 +0200)]
ramips: define common MikroTik RouterBOARD image recipe
All these devices share the exact same image format.
The usb3 kmod is added for the rbm11g, as the rbm11g has a mini-pcie
slot like its bigger sibling. The usb kmod is necessary for
usb-over-pcie support, which is mandatory for a lot of LTE modules.
Signed-off-by: Thibaut VARÈNE <hacks@slashdirt.org>
Johann Neuhauser [Thu, 17 May 2018 17:12:35 +0000 (19:12 +0200)]
lantiq: add support for FritzBox 7312
The FritzBox 7312 is also known as 1&1 WLAN-MODEM. The device is almost
the same as FB7330, but only one ETH-Port and no USB.
Hardware
SoC: Lantiq Xway ARX188 PSB 50812 EL
RAM: 64MB DDR1 (Zentel A4S12D40FTP-G5)
Ethernet: Atheros 8030
Wireless: Atheros AR9227 b/g/n 2x2
DSL: Lantiq ADSL2+
DECT: Dialog SC14441
Buttons: WiFi, DECT
LEDs: Power/DSL, Fon, DECT, WLAN, Info
LEDs
Power: GPIO#44 (active low)
Internet: GPIO#47 (active low)
DECT: GPIO#38 (active low)
WLAN: GPIO#37 (active low)
Info: GPIO#35 (active low)
The Fon LED is labeled as internet in avm gpl sources.
Buttons
WLAN: GPIO#1 (active low)
DECT: GPIO#2 (active low)
Phy
GPIO#03: 25 MHz
GPIO#34: Reset (active low)
GPIO#39: Int
GPIO#42: MII MDIO
GPIO#43: MII MDC
PCIe
GPIO#21: reset (active low)
Installation:
To install OpenWrt via Eva bootloader, within the first seconds after
power on a ftp connection need to be established to the FRITZ!Box at
192.168.178.1 and the the following ftp commands need to be run:
ftp> quote USER adam2
ftp> quote PASS adam2
ftp> binary
ftp> debug
ftp> passive
ftp> quote MEDIA FLSH
ftp> put /path/to/openwrt-lantiq-xway-avm_fritz7312-squashfs-sysupgrade.bin mtd1
ftp> quote REBOOT
Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
Johann Neuhauser [Thu, 17 May 2018 17:12:35 +0000 (19:12 +0200)]
lantiq: etop: pass devicetree node to phy driver
Use of_mdiobus_register() to pass the ethernet phy node to the phy
drivers. This is needed for the at8030 phy driver which needs to know
the GPIO which is connected to the ar8030 reset pin.
This driver expects a child in gsw/etop node named "mdio-bus", which has
the ethernet phys defined:
&gsw {
phy-mode = "rmii";
phy-handle = <&phy0>;
mtd-mac-address = <&ath9k_cal 0xa91>;
mtd-mac-address-increment = <(-2)>;
mdio-bus {
#address-cells = <1>;
#size-cells = <0>;
reg = <0>;
phy0: ethernet-phy@0 {
reg = <0>;
reset-gpios = <&gpio 34 GPIO_ACTIVE_LOW>;
};
};
};
Fallback to mdiobus_register() if no mdio-bus child node exists. This
way we don't need to touch all xway dts files, for which we don't know
the actual address on the mdio bus.
Signed-off-by: Johann Neuhauser <johann@it-neuhauser.de>
Luiz Angelo Daros de Luca [Tue, 17 Jul 2018 22:41:09 +0000 (19:41 -0300)]
base-files: fix wrong sysctl parameter order
Restarting service sysctl echos multiple errors like:
sysctl: -e: No such file or directory
After the first filename, all remaining arguments are treated
as files.
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
Aleksandr V. Piskunov [Mon, 16 Jul 2018 18:14:50 +0000 (21:14 +0300)]
ath79: fix TP-Link Archer C7 v2 wlan1 MAC address
The mac address for the 2.4 wireless need to be decremented by one.
Correct MAC adress increments for this board are:
wlan0 (5GHz) : -2
wlan1 (2.4GHz) : -1
eth1 (LAN) : 0
eth0 (WAN) : 1
Signed-off-by: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com>
Mathias Kresin [Wed, 11 Jul 2018 20:13:36 +0000 (22:13 +0200)]
hostapd: fix conflicts hell
Add each variant to the matching PROVIDERS variables after evaluating
the respective hostapd*, wpad* and wpa* variant.
Each package providing the same feature will automatically conflict with
all prior packages providing the same feature.
This way we can handle the conflicts automatically without introducing
recursive dependencies.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Mathias Kresin [Tue, 10 Jul 2018 19:17:33 +0000 (21:17 +0200)]
hostapd: cleanup package definition
Move common variables and/or values to the package (variant) default.
Add additional values in variant packages if necessary. Remove further
duplicates by introducing new templates.
Remove the ANY_[HOSTAPD|SUPPLICANT_PROVIDERS]_PROVIDERS. The are the
same as the variables without the any prefix. No need to maintain both
variables.
Signed-off-by: Mathias Kresin <dev@kresin.me>
Kevin Darbyshire-Bryant [Wed, 18 Jul 2018 16:51:59 +0000 (17:51 +0100)]
igmpproxy: run in foreground for procd
procd needs processes to stay in foreground to remain under its gaze and
control. Failure to do so means service stop commands fail to actually
stop the process (procd doesn't think it's running 'cos the process has
exited already as part of its forking routing)
Signed-off-by: Kevin Darbyshire-Bryant <ldir@darbyshire-bryant.me.uk>
Hans Dedecker [Tue, 17 Jul 2018 20:12:57 +0000 (22:12 +0200)]
firewall3: update to latest git HEAD
d2bbeb7 firewall3: make reject types selectable by user
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Hans Dedecker [Tue, 17 Jul 2018 11:42:17 +0000 (13:42 +0200)]
dnsmasq: don't use network functions at boottime (FS#1542)
As dnsmasq is started earlier than netifd usage of network.sh functions
at boottime will fail; therefore don't call at boottime the functions
which construct the dhcp pool/relay info.
As interface triggers are installed the dhcp pool/relay info will be
constructed when the interface gets reported as up by netifd.
At the same time also register interface triggers based on DHCP relay
config.
Signed-off-by: Hans Dedecker <dedeckeh@gmail.com>
Jo-Philipp Wich [Tue, 17 Jul 2018 18:21:39 +0000 (20:21 +0200)]
ppp: fix building pptp plugin
The pptp.so plugin needs to be built with -fPIC as well in order to be
linkable again.
Fixes
888a15ff83 ("ppp: add missing -fPIC to rp-pppoe.so CFLAGS")
Fixes
e7397eef69 ("ppp: compile with LTO enabled")
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Yousong Zhou [Tue, 17 Jul 2018 17:05:53 +0000 (17:05 +0000)]
scripts/dl_github_archive.py: stringify exception
Closes openwrt/openwrt#1163
Signed-off-by: Yousong Zhou <yszhou4tech@gmail.com>
Jo-Philipp Wich [Tue, 17 Jul 2018 14:01:46 +0000 (16:01 +0200)]
openvpn: increase procd termination timeout to 15s
Increase the termination timeout to 15s to let OpenVPN properly tear down
its connections, especially when weak links or complex down scripts are
involved.
Fixes FS#859.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Tue, 17 Jul 2018 12:40:04 +0000 (14:40 +0200)]
mediatek: fix parallel build issues in image build code
Drop the parallel-unsafe custom Build/dtb macro and use the .dtb artifacts
produced by the generic image build code.
Also remove unused .dtb references in the mt7623 subtarget.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Jo-Philipp Wich [Tue, 17 Jul 2018 05:47:33 +0000 (07:47 +0200)]
base-files: network.sh: gracefully handle missing network.interface ubus ns
When attempting to use any of the functions in network.sh while netifd is
not started yet, the ubus interface dump query will fail with "Not found",
yielding an empty response.
Subsequently, jsonfilter is invoked with an empty string instead of a valid
JSON document, causing it to emit a second "unexpected end of data" error.
This caused the dnsmasq init script to log the following errors during
early boot on some systems:
procd: /etc/rc.d/S19dnsmasq: Command failed: Not found.
procd: /etc/rc.d/S19dnsmasq: Failed to parse json data: unexpected end of data.
Fix the issue by allowing the ubus query to fail with "Not found" but still
logging other failures, and by passing an empty JSON object to jsonfilter
if the interface status cache is empty.
Signed-off-by: Jo-Philipp Wich <jo@mein.io>
Kin Chan [Mon, 5 Mar 2018 07:30:56 +0000 (07:30 +0000)]
ar71xx: Move F9K1115v2 under ar71xx tiny target
F9K1115v2 has a kernel partition size of 1408 kB.
Since kernel 4.9.x+ the kernel image for this device compiled had exceeded
the kernel partition size limit and thus failing size check.
The kernel image generated for this device
under ar71xx tiny target is 1329.67 kB < 1408 kB.
Signed-off-by: Kin Chan <kcchan1@outlook.com>
Peter Wagner [Tue, 3 Jul 2018 06:54:41 +0000 (08:54 +0200)]
librpc: add host build to install h files needed for nfs-kernel-server to get compiled
Signed-off-by: Peter Wagner <tripolar@gmx.at>
Chuanhong Guo [Mon, 16 Jul 2018 08:27:22 +0000 (16:27 +0800)]
ramips: Use dts alias based status led
Also fix several typos in led node name.
Signed-off-by: Chuanhong Guo <gch981213@gmail.com>
Steffen Förster [Sun, 8 Jul 2018 20:18:07 +0000 (22:18 +0200)]
kernel: insmod phy-broadcom module during preinit
Some HP Thin clients use the broadcom nextreme chip as integrated NIC.
It is connected via PCI express and will only be found automatically if
phy-broadcom is loaded before tg3. This small change makes the thin
client usable for Freifunk with gluon out of the box.
Signed-off-by: Steffen Förster <steffen@chemnitz.freifunk.net>
Daniel Engberg [Sat, 14 Jul 2018 21:05:29 +0000 (23:05 +0200)]
popt: Replace dead upstream site with mirror
We can safely assume by now that rpm5.org is dead and isn't coming back
so just add another mirror instead.
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Sat, 14 Jul 2018 20:52:35 +0000 (22:52 +0200)]
package/utils/f2fs-tools: Update to 1.11.0
Update f2fs-tools to 1.11.0
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
Daniel Engberg [Sat, 14 Jul 2018 20:35:34 +0000 (22:35 +0200)]
package/utils/e2fsprogs: Update to 1.44.3
Update e2fsprogs to 1.44.3
Enable threads
Enable LTO
Numbers on mips_24kc (a few packages):
Old --> New --> LTO and threads
e2fsprogs_*_mips_24kc.ipk: 173 --> 174 --> 154kbyte
libblkid_*_mips_24kc.ipk: 114 --> 114 --> 114kbyte
libext2fs_*_mips_24kc.ipk: 138 --> 139 --> 139kbyte
Signed-off-by: Daniel Engberg <daniel.engberg.lists@pyret.net>
projects / openwrt / staging / ynezz.git / log