git.openwrt.org Git - openwrt/staging/blogic.git/blob

1 // SPDX-License-Identifier: GPL-2.0

2 /*

3 * USB device quirk handling logic and table

4 *

7 */

9 #include <linux/usb.h>

10 #include <linux/usb/quirks.h>

11 #include <linux/usb/hcd.h>

12 #include "usb.h"

14 /* Lists of quirky USB devices, split in device quirks and interface quirks.

15 * Device quirks are applied at the very beginning of the enumeration process,

16 * right after reading the device descriptor. They can thus only match on device

17 * information.

18 *

19 * Interface quirks are applied after reading all the configuration descriptors.

20 * They can match on both device and interface information.

21 *

22 * Note that the DELAY_INIT and HONOR_BNUMINTERFACES quirks do not make sense as

23 * interface quirks, as they only influence the enumeration process which is run

24 * before processing the interface quirks.

25 *

26 * Please keep the lists ordered by:

27 * 1) Vendor ID

28 * 2) Product ID

29 * 3) Class ID

30 */

31 static const struct usb_device_id usb_quirk_list[] = {

32 /* CBM - Flash disk */

33 { USB_DEVICE(0x0204, 0x6025), .driver_info = USB_QUIRK_RESET_RESUME },

35 /* WORLDE easy key (easykey.25) MIDI controller */

36 { USB_DEVICE(0x0218, 0x0401), .driver_info =

37 USB_QUIRK_CONFIG_INTF_STRINGS },

39 /* HP 5300/5370C scanner */

40 { USB_DEVICE(0x03f0, 0x0701), .driver_info =

41 USB_QUIRK_STRING_FETCH_255 },

43 /* Creative SB Audigy 2 NX */

44 { USB_DEVICE(0x041e, 0x3020), .driver_info = USB_QUIRK_RESET_RESUME },

46 /* USB3503 */

47 { USB_DEVICE(0x0424, 0x3503), .driver_info = USB_QUIRK_RESET_RESUME },

49 /* Microsoft Wireless Laser Mouse 6000 Receiver */

50 { USB_DEVICE(0x045e, 0x00e1), .driver_info = USB_QUIRK_RESET_RESUME },

52 /* Microsoft LifeCam-VX700 v2.0 */

53 { USB_DEVICE(0x045e, 0x0770), .driver_info = USB_QUIRK_RESET_RESUME },

55 /* Logitech HD Pro Webcams C920, C920-C, C925e and C930e */

56 { USB_DEVICE(0x046d, 0x082d), .driver_info = USB_QUIRK_DELAY_INIT },

57 { USB_DEVICE(0x046d, 0x0841), .driver_info = USB_QUIRK_DELAY_INIT },

58 { USB_DEVICE(0x046d, 0x0843), .driver_info = USB_QUIRK_DELAY_INIT },

59 { USB_DEVICE(0x046d, 0x085b), .driver_info = USB_QUIRK_DELAY_INIT },

61 /* Logitech ConferenceCam CC3000e */

62 { USB_DEVICE(0x046d, 0x0847), .driver_info = USB_QUIRK_DELAY_INIT },

63 { USB_DEVICE(0x046d, 0x0848), .driver_info = USB_QUIRK_DELAY_INIT },

65 /* Logitech PTZ Pro Camera */

66 { USB_DEVICE(0x046d, 0x0853), .driver_info = USB_QUIRK_DELAY_INIT },

68 /* Logitech Quickcam Fusion */

69 { USB_DEVICE(0x046d, 0x08c1), .driver_info = USB_QUIRK_RESET_RESUME },

71 /* Logitech Quickcam Orbit MP */

72 { USB_DEVICE(0x046d, 0x08c2), .driver_info = USB_QUIRK_RESET_RESUME },

74 /* Logitech Quickcam Pro for Notebook */

75 { USB_DEVICE(0x046d, 0x08c3), .driver_info = USB_QUIRK_RESET_RESUME },

77 /* Logitech Quickcam Pro 5000 */

78 { USB_DEVICE(0x046d, 0x08c5), .driver_info = USB_QUIRK_RESET_RESUME },

80 /* Logitech Quickcam OEM Dell Notebook */

81 { USB_DEVICE(0x046d, 0x08c6), .driver_info = USB_QUIRK_RESET_RESUME },

83 /* Logitech Quickcam OEM Cisco VT Camera II */

84 { USB_DEVICE(0x046d, 0x08c7), .driver_info = USB_QUIRK_RESET_RESUME },

86 /* Logitech Harmony 700-series */

87 { USB_DEVICE(0x046d, 0xc122), .driver_info = USB_QUIRK_DELAY_INIT },

89 /* Philips PSC805 audio device */

90 { USB_DEVICE(0x0471, 0x0155), .driver_info = USB_QUIRK_RESET_RESUME },

92 /* Plantronic Audio 655 DSP */

93 { USB_DEVICE(0x047f, 0xc008), .driver_info = USB_QUIRK_RESET_RESUME },

95 /* Plantronic Audio 648 USB */

96 { USB_DEVICE(0x047f, 0xc013), .driver_info = USB_QUIRK_RESET_RESUME },

98 /* Artisman Watchdog Dongle */

99 { USB_DEVICE(0x04b4, 0x0526), .driver_info =

100 USB_QUIRK_CONFIG_INTF_STRINGS },

101

102 /* Microchip Joss Optical infrared touchboard device */

103 { USB_DEVICE(0x04d8, 0x000c), .driver_info =

104 USB_QUIRK_CONFIG_INTF_STRINGS },

105

106 /* CarrolTouch 4000U */

107 { USB_DEVICE(0x04e7, 0x0009), .driver_info = USB_QUIRK_RESET_RESUME },

108

109 /* CarrolTouch 4500U */

110 { USB_DEVICE(0x04e7, 0x0030), .driver_info = USB_QUIRK_RESET_RESUME },

111

112 /* Samsung Android phone modem - ID conflict with SPH-I500 */

113 { USB_DEVICE(0x04e8, 0x6601), .driver_info =

114 USB_QUIRK_CONFIG_INTF_STRINGS },

115

116 /* Elan Touchscreen */

117 { USB_DEVICE(0x04f3, 0x0089), .driver_info =

118 USB_QUIRK_DEVICE_QUALIFIER },

119

120 { USB_DEVICE(0x04f3, 0x009b), .driver_info =

121 USB_QUIRK_DEVICE_QUALIFIER },

122

123 { USB_DEVICE(0x04f3, 0x010c), .driver_info =

124 USB_QUIRK_DEVICE_QUALIFIER },

125

126 { USB_DEVICE(0x04f3, 0x0125), .driver_info =

127 USB_QUIRK_DEVICE_QUALIFIER },

128

129 { USB_DEVICE(0x04f3, 0x016f), .driver_info =

130 USB_QUIRK_DEVICE_QUALIFIER },

131

132 { USB_DEVICE(0x04f3, 0x0381), .driver_info =

133 USB_QUIRK_NO_LPM },

134

135 { USB_DEVICE(0x04f3, 0x21b8), .driver_info =

136 USB_QUIRK_DEVICE_QUALIFIER },

137

138 /* Roland SC-8820 */

139 { USB_DEVICE(0x0582, 0x0007), .driver_info = USB_QUIRK_RESET_RESUME },

140

141 /* Edirol SD-20 */

142 { USB_DEVICE(0x0582, 0x0027), .driver_info = USB_QUIRK_RESET_RESUME },

143

144 /* Alcor Micro Corp. Hub */

145 { USB_DEVICE(0x058f, 0x9254), .driver_info = USB_QUIRK_RESET_RESUME },

146

147 /* appletouch */

148 { USB_DEVICE(0x05ac, 0x021a), .driver_info = USB_QUIRK_RESET_RESUME },

149

150 /* Genesys Logic hub, internally used by KY-688 USB 3.1 Type-C Hub */

151 { USB_DEVICE(0x05e3, 0x0612), .driver_info = USB_QUIRK_NO_LPM },

152

153 /* ELSA MicroLink 56K */

154 { USB_DEVICE(0x05cc, 0x2267), .driver_info = USB_QUIRK_RESET_RESUME },

155

156 /* Genesys Logic hub, internally used by Moshi USB to Ethernet Adapter */

157 { USB_DEVICE(0x05e3, 0x0616), .driver_info = USB_QUIRK_NO_LPM },

158

159 /* Avision AV600U */

160 { USB_DEVICE(0x0638, 0x0a13), .driver_info =

161 USB_QUIRK_STRING_FETCH_255 },

162

163 /* Saitek Cyborg Gold Joystick */

164 { USB_DEVICE(0x06a3, 0x0006), .driver_info =

165 USB_QUIRK_CONFIG_INTF_STRINGS },

166

167 /* Guillemot Webcam Hercules Dualpix Exchange (2nd ID) */

168 { USB_DEVICE(0x06f8, 0x0804), .driver_info = USB_QUIRK_RESET_RESUME },

169

170 /* Guillemot Webcam Hercules Dualpix Exchange*/

171 { USB_DEVICE(0x06f8, 0x3005), .driver_info = USB_QUIRK_RESET_RESUME },

172

173 /* Midiman M-Audio Keystation 88es */

174 { USB_DEVICE(0x0763, 0x0192), .driver_info = USB_QUIRK_RESET_RESUME },

175

176 /* M-Systems Flash Disk Pioneers */

177 { USB_DEVICE(0x08ec, 0x1000), .driver_info = USB_QUIRK_RESET_RESUME },

178

179 /* Baum Vario Ultra */

180 { USB_DEVICE(0x0904, 0x6101), .driver_info =

181 USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL },

182 { USB_DEVICE(0x0904, 0x6102), .driver_info =

183 USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL },

184 { USB_DEVICE(0x0904, 0x6103), .driver_info =

185 USB_QUIRK_LINEAR_FRAME_INTR_BINTERVAL },

186

187 /* Keytouch QWERTY Panel keyboard */

188 { USB_DEVICE(0x0926, 0x3333), .driver_info =

189 USB_QUIRK_CONFIG_INTF_STRINGS },

190

191 /* X-Rite/Gretag-Macbeth Eye-One Pro display colorimeter */

192 { USB_DEVICE(0x0971, 0x2000), .driver_info = USB_QUIRK_NO_SET_INTF },

193

194 /* Broadcom BCM92035DGROM BT dongle */

195 { USB_DEVICE(0x0a5c, 0x2021), .driver_info = USB_QUIRK_RESET_RESUME },

196

197 /* MAYA44USB sound device */

198 { USB_DEVICE(0x0a92, 0x0091), .driver_info = USB_QUIRK_RESET_RESUME },

199

200 /* ASUS Base Station(T100) */

201 { USB_DEVICE(0x0b05, 0x17e0), .driver_info =

202 USB_QUIRK_IGNORE_REMOTE_WAKEUP },

203

204 /* Action Semiconductor flash disk */

205 { USB_DEVICE(0x10d6, 0x2200), .driver_info =

206 USB_QUIRK_STRING_FETCH_255 },

207

208 /* Huawei 4G LTE module */

209 { USB_DEVICE(0x12d1, 0x15bb), .driver_info =

210 USB_QUIRK_DISCONNECT_SUSPEND },

211 { USB_DEVICE(0x12d1, 0x15c3), .driver_info =

212 USB_QUIRK_DISCONNECT_SUSPEND },

213

214 /* SKYMEDI USB_DRIVE */

215 { USB_DEVICE(0x1516, 0x8628), .driver_info = USB_QUIRK_RESET_RESUME },

216

217 /* Razer - Razer Blade Keyboard */

218 { USB_DEVICE(0x1532, 0x0116), .driver_info =

219 USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },

220

221 /* BUILDWIN Photo Frame */

222 { USB_DEVICE(0x1908, 0x1315), .driver_info =

223 USB_QUIRK_HONOR_BNUMINTERFACES },

224

225 /* Protocol and OTG Electrical Test Device */

226 { USB_DEVICE(0x1a0a, 0x0200), .driver_info =

227 USB_QUIRK_LINEAR_UFRAME_INTR_BINTERVAL },

228

229 /* Corsair K70 RGB */

230 { USB_DEVICE(0x1b1c, 0x1b13), .driver_info = USB_QUIRK_DELAY_INIT },

231

232 /* Corsair Strafe RGB */

233 { USB_DEVICE(0x1b1c, 0x1b20), .driver_info = USB_QUIRK_DELAY_INIT },

234

235 /* Corsair K70 LUX */

236 { USB_DEVICE(0x1b1c, 0x1b36), .driver_info = USB_QUIRK_DELAY_INIT },

237

238 /* MIDI keyboard WORLDE MINI */

239 { USB_DEVICE(0x1c75, 0x0204), .driver_info =

240 USB_QUIRK_CONFIG_INTF_STRINGS },

241

242 /* Acer C120 LED Projector */

243 { USB_DEVICE(0x1de1, 0xc102), .driver_info = USB_QUIRK_NO_LPM },

244

245 /* Blackmagic Design Intensity Shuttle */

246 { USB_DEVICE(0x1edb, 0xbd3b), .driver_info = USB_QUIRK_NO_LPM },

247

248 /* Blackmagic Design UltraStudio SDI */

249 { USB_DEVICE(0x1edb, 0xbd4f), .driver_info = USB_QUIRK_NO_LPM },

250

251 /* Hauppauge HVR-950q */

252 { USB_DEVICE(0x2040, 0x7200), .driver_info =

253 USB_QUIRK_CONFIG_INTF_STRINGS },

254

255 /* INTEL VALUE SSD */

256 { USB_DEVICE(0x8086, 0xf1a5), .driver_info = USB_QUIRK_RESET_RESUME },

257

258 { } /* terminating entry must be last */

259 };

260

261 static const struct usb_device_id usb_interface_quirk_list[] = {

262 /* Logitech UVC Cameras */

263 { USB_VENDOR_AND_INTERFACE_INFO(0x046d, USB_CLASS_VIDEO, 1, 0),

264 .driver_info = USB_QUIRK_RESET_RESUME },

265

266 { } /* terminating entry must be last */

267 };

268

269 static const struct usb_device_id usb_amd_resume_quirk_list[] = {

270 /* Lenovo Mouse with Pixart controller */

271 { USB_DEVICE(0x17ef, 0x602e), .driver_info = USB_QUIRK_RESET_RESUME },

272

273 /* Pixart Mouse */

274 { USB_DEVICE(0x093a, 0x2500), .driver_info = USB_QUIRK_RESET_RESUME },

275 { USB_DEVICE(0x093a, 0x2510), .driver_info = USB_QUIRK_RESET_RESUME },

276 { USB_DEVICE(0x093a, 0x2521), .driver_info = USB_QUIRK_RESET_RESUME },

277 { USB_DEVICE(0x03f0, 0x2b4a), .driver_info = USB_QUIRK_RESET_RESUME },

278

279 /* Logitech Optical Mouse M90/M100 */

280 { USB_DEVICE(0x046d, 0xc05a), .driver_info = USB_QUIRK_RESET_RESUME },

281

282 { } /* terminating entry must be last */

283 };

284

285 static bool usb_match_any_interface(struct usb_device *udev,

286 const struct usb_device_id *id)

287 {

288 unsigned int i;

289

290 for (i = 0; i < udev->descriptor.bNumConfigurations; ++i) {

291 struct usb_host_config *cfg = &udev->config[i];

292 unsigned int j;

293

294 for (j = 0; j < cfg->desc.bNumInterfaces; ++j) {

295 struct usb_interface_cache *cache;

296 struct usb_host_interface *intf;

297

298 cache = cfg->intf_cache[j];

299 if (cache->num_altsetting == 0)

300 continue;

301

302 intf = &cache->altsetting[0];

303 if (usb_match_one_id_intf(udev, intf, id))

304 return true;

305 }

306 }

307

308 return false;

309 }

310

311 static int usb_amd_resume_quirk(struct usb_device *udev)

312 {

313 struct usb_hcd *hcd;

314

315 hcd = bus_to_hcd(udev->bus);

316 /* The device should be attached directly to root hub */

317 if (udev->level == 1 && hcd->amd_resume_bug == 1)

318 return 1;

319

320 return 0;

321 }

322

323 static u32 __usb_detect_quirks(struct usb_device *udev,

324 const struct usb_device_id *id)

325 {

326 u32 quirks = 0;

327

328 for (; id->match_flags; id++) {

329 if (!usb_match_device(udev, id))

330 continue;

331

332 if ((id->match_flags & USB_DEVICE_ID_MATCH_INT_INFO) &&

333 !usb_match_any_interface(udev, id))

334 continue;

335

336 quirks |= (u32)(id->driver_info);

337 }

338

339 return quirks;

340 }

341

342 /*

343 * Detect any quirks the device has, and do any housekeeping for it if needed.

344 */

345 void usb_detect_quirks(struct usb_device *udev)

346 {

347 udev->quirks = __usb_detect_quirks(udev, usb_quirk_list);

348

349 /*

350 * Pixart-based mice would trigger remote wakeup issue on AMD

351 * Yangtze chipset, so set them as RESET_RESUME flag.

352 */

353 if (usb_amd_resume_quirk(udev))

354 udev->quirks |= __usb_detect_quirks(udev,

355 usb_amd_resume_quirk_list);

356

357 if (udev->quirks)

358 dev_dbg(&udev->dev, "USB quirks for this device: %x\n",

359 udev->quirks);

360

361 #ifdef CONFIG_USB_DEFAULT_PERSIST

362 if (!(udev->quirks & USB_QUIRK_RESET))

363 udev->persist_enabled = 1;

364 #else

365 /* Hubs are automatically enabled for USB-PERSIST */

366 if (udev->descriptor.bDeviceClass == USB_CLASS_HUB)

367 udev->persist_enabled = 1;

368 #endif /* CONFIG_USB_DEFAULT_PERSIST */

369 }

370

371 void usb_detect_interface_quirks(struct usb_device *udev)

372 {

373 u32 quirks;

374

375 quirks = __usb_detect_quirks(udev, usb_interface_quirk_list);

376 if (quirks == 0)

377 return;

378

379 dev_dbg(&udev->dev, "USB interface quirks for this device: %x\n",

380 quirks);

381 udev->quirks |= quirks;

382 }