From 06281d460fc5d8df843786341ded16d85f50dd3d Mon Sep 17 00:00:00 2001 From: John Youn Date: Mon, 22 Aug 2016 15:39:13 -0700 Subject: [PATCH] usb: dwc3: Add ENDXFER command polling ENDXFER polling is available on version 3.10a and later of the DWC_usb3 (USB 3.0) controller. With this feature, the software can poll the CMDACT bit in the DEPCMD register after issuing an ENDXFER command. This feature is enabled by writing GUCTL2[14]. This feature is NOT available on the DWC_usb31 (USB 3.1) IP. Signed-off-by: John Youn Signed-off-by: Felipe Balbi --- drivers/usb/dwc3/core.c | 11 +++++++++++ drivers/usb/dwc3/core.h | 4 ++++ drivers/usb/dwc3/gadget.c | 16 +++++++++++++++- 3 files changed, 30 insertions(+), 1 deletion(-) diff --git a/drivers/usb/dwc3/core.c b/drivers/usb/dwc3/core.c index 25e424e40462..d6d3fa0fa528 100644 --- a/drivers/usb/dwc3/core.c +++ b/drivers/usb/dwc3/core.c @@ -704,6 +704,17 @@ static int dwc3_core_init(struct dwc3 *dwc) break; } + /* + * ENDXFER polling is available on version 3.10a and later of + * the DWC_usb3 controller. It is NOT available in the + * DWC_usb31 controller. + */ + if (!dwc3_is_usb31(dwc) && dwc->revision >= DWC3_REVISION_310A) { + reg = dwc3_readl(dwc->regs, DWC3_GUCTL2); + reg |= DWC3_GUCTL2_RST_ACTBITLATER; + dwc3_writel(dwc->regs, DWC3_GUCTL2, reg); + } + return 0; err4: diff --git a/drivers/usb/dwc3/core.h b/drivers/usb/dwc3/core.h index 002e6477d586..b2317e702f57 100644 --- a/drivers/usb/dwc3/core.h +++ b/drivers/usb/dwc3/core.h @@ -109,6 +109,7 @@ #define DWC3_GPRTBIMAP_HS1 0xc184 #define DWC3_GPRTBIMAP_FS0 0xc188 #define DWC3_GPRTBIMAP_FS1 0xc18c +#define DWC3_GUCTL2 0xc19c #define DWC3_VER_NUMBER 0xc1a0 #define DWC3_VER_TYPE 0xc1a4 @@ -288,6 +289,9 @@ #define DWC3_GFLADJ_30MHZ_SDBND_SEL (1 << 7) #define DWC3_GFLADJ_30MHZ_MASK 0x3f +/* Global User Control Register 2 */ +#define DWC3_GUCTL2_RST_ACTBITLATER (1 << 14) + /* Device Configuration Register */ #define DWC3_DCFG_DEVADDR(addr) ((addr) << 3) #define DWC3_DCFG_DEVADDR_MASK DWC3_DCFG_DEVADDR(0x7f) diff --git a/drivers/usb/dwc3/gadget.c b/drivers/usb/dwc3/gadget.c index 0288ea99c85a..161a6bfcb84e 100644 --- a/drivers/usb/dwc3/gadget.c +++ b/drivers/usb/dwc3/gadget.c @@ -2228,6 +2228,18 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force) * * - Issue EndTransfer WITH CMDIOC bit set * - Wait 100us + * + * As of IP version 3.10a of the DWC_usb3 IP, the controller + * supports a mode to work around the above limitation. The + * software can poll the CMDACT bit in the DEPCMD register + * after issuing a EndTransfer command. This mode is enabled + * by writing GUCTL2[14]. This polling is already done in the + * dwc3_send_gadget_ep_cmd() function so if the mode is + * enabled, the EndTransfer command will have completed upon + * returning from this function and we don't need to delay for + * 100us. + * + * This mode is NOT available on the DWC_usb31 IP. */ cmd = DWC3_DEPCMD_ENDTRANSFER; @@ -2239,7 +2251,9 @@ static void dwc3_stop_active_transfer(struct dwc3 *dwc, u32 epnum, bool force) WARN_ON_ONCE(ret); dep->resource_index = 0; dep->flags &= ~DWC3_EP_BUSY; - udelay(100); + + if (dwc3_is_usb31(dwc) || dwc->revision < DWC3_REVISION_310A) + udelay(100); } static void dwc3_stop_active_transfers(struct dwc3 *dwc) -- 2.30.2