From 06b2decd924891b6c7570a91f91e11a5a8fed421 Mon Sep 17 00:00:00 2001 From: Alan Brady Date: Wed, 12 Jul 2017 05:46:06 -0400 Subject: [PATCH] i40e: prevent changing ITR if adaptive-rx/tx enabled Currently the driver allows the user to change (or even disable) interrupt moderation if adaptive-rx/tx is enabled when this should not be the case. Adaptive RX/TX will not respect the user's ITR settings so allowing the user to change it is weird. This bug would also allow the user to disable interrupt moderation with adaptive-rx/tx enabled which doesn't make much sense either. This patch makes it such that if adaptive-rx/tx is enabled, the user cannot make any manual adjustments to interrupt moderation. It also makes it so that if ITR is disabled but adaptive-rx/tx is then enabled, ITR will be re-enabled. Signed-off-by: Alan Brady Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- .../net/ethernet/intel/i40e/i40e_ethtool.c | 65 ++++++++++++------- 1 file changed, 43 insertions(+), 22 deletions(-) diff --git a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c index a868c8d4fec9..05e89864f781 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_ethtool.c +++ b/drivers/net/ethernet/intel/i40e/i40e_ethtool.c @@ -2194,14 +2194,29 @@ static int __i40e_set_coalesce(struct net_device *netdev, int queue) { struct i40e_netdev_priv *np = netdev_priv(netdev); + u16 intrl_reg, cur_rx_itr, cur_tx_itr; struct i40e_vsi *vsi = np->vsi; struct i40e_pf *pf = vsi->back; - u16 intrl_reg; int i; if (ec->tx_max_coalesced_frames_irq || ec->rx_max_coalesced_frames_irq) vsi->work_limit = ec->tx_max_coalesced_frames_irq; + if (queue < 0) { + cur_rx_itr = vsi->rx_rings[0]->rx_itr_setting; + cur_tx_itr = vsi->tx_rings[0]->tx_itr_setting; + } else if (queue < vsi->num_queue_pairs) { + cur_rx_itr = vsi->rx_rings[queue]->rx_itr_setting; + cur_tx_itr = vsi->tx_rings[queue]->tx_itr_setting; + } else { + netif_info(pf, drv, netdev, "Invalid queue value, queue range is 0 - %d\n", + vsi->num_queue_pairs - 1); + return -EINVAL; + } + + cur_tx_itr &= ~I40E_ITR_DYNAMIC; + cur_rx_itr &= ~I40E_ITR_DYNAMIC; + /* tx_coalesce_usecs_high is ignored, use rx-usecs-high instead */ if (ec->tx_coalesce_usecs_high != vsi->int_rate_limit) { netif_info(pf, drv, netdev, "tx-usecs-high is not used, please program rx-usecs-high\n"); @@ -2214,15 +2229,34 @@ static int __i40e_set_coalesce(struct net_device *netdev, return -EINVAL; } - if (ec->rx_coalesce_usecs == 0) { - if (ec->use_adaptive_rx_coalesce) - netif_info(pf, drv, netdev, "rx-usecs=0, need to disable adaptive-rx for a complete disable\n"); - } else if ((ec->rx_coalesce_usecs < (I40E_MIN_ITR << 1)) || - (ec->rx_coalesce_usecs > (I40E_MAX_ITR << 1))) { - netif_info(pf, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n"); - return -EINVAL; + if (ec->rx_coalesce_usecs != cur_rx_itr && + ec->use_adaptive_rx_coalesce) { + netif_info(pf, drv, netdev, "RX interrupt moderation cannot be changed if adaptive-rx is enabled.\n"); + return -EINVAL; + } + + if (ec->rx_coalesce_usecs > (I40E_MAX_ITR << 1)) { + netif_info(pf, drv, netdev, "Invalid value, rx-usecs range is 0-8160\n"); + return -EINVAL; } + if (ec->tx_coalesce_usecs != cur_tx_itr && + ec->use_adaptive_tx_coalesce) { + netif_info(pf, drv, netdev, "TX interrupt moderation cannot be changed if adaptive-tx is enabled.\n"); + return -EINVAL; + } + + if (ec->tx_coalesce_usecs > (I40E_MAX_ITR << 1)) { + netif_info(pf, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n"); + return -EINVAL; + } + + if (ec->use_adaptive_rx_coalesce && !cur_rx_itr) + ec->rx_coalesce_usecs = I40E_MIN_ITR << 1; + + if (ec->use_adaptive_tx_coalesce && !cur_tx_itr) + ec->tx_coalesce_usecs = I40E_MIN_ITR << 1; + intrl_reg = i40e_intrl_usec_to_reg(ec->rx_coalesce_usecs_high); vsi->int_rate_limit = INTRL_REG_TO_USEC(intrl_reg); if (vsi->int_rate_limit != ec->rx_coalesce_usecs_high) { @@ -2230,27 +2264,14 @@ static int __i40e_set_coalesce(struct net_device *netdev, vsi->int_rate_limit); } - if (ec->tx_coalesce_usecs == 0) { - if (ec->use_adaptive_tx_coalesce) - netif_info(pf, drv, netdev, "tx-usecs=0, need to disable adaptive-tx for a complete disable\n"); - } else if ((ec->tx_coalesce_usecs < (I40E_MIN_ITR << 1)) || - (ec->tx_coalesce_usecs > (I40E_MAX_ITR << 1))) { - netif_info(pf, drv, netdev, "Invalid value, tx-usecs range is 0-8160\n"); - return -EINVAL; - } - /* rx and tx usecs has per queue value. If user doesn't specify the queue, * apply to all queues. */ if (queue < 0) { for (i = 0; i < vsi->num_queue_pairs; i++) i40e_set_itr_per_queue(vsi, ec, i); - } else if (queue < vsi->num_queue_pairs) { - i40e_set_itr_per_queue(vsi, ec, queue); } else { - netif_info(pf, drv, netdev, "Invalid queue value, queue range is 0 - %d\n", - vsi->num_queue_pairs - 1); - return -EINVAL; + i40e_set_itr_per_queue(vsi, ec, queue); } return 0; -- 2.30.2