From 082f2c1cc7aa7aabdbf5235b788ff42e10abb399 Mon Sep 17 00:00:00 2001 From: Greg Ungerer Date: Tue, 10 Jan 2006 16:59:04 +1000 Subject: [PATCH] [PATCH] m68knommu: set irq priority/level different for each ColdFire serial port Set the hardware interrupt priority to a different value for each attached ColdFire serial port. According to the CPU documentation you should not use the same combination of level/priority on more than one device. People have reported odd serial port behavior with them set the same. Signed-off-by: Greg Ungerer Signed-off-by: Linus Torvalds --- drivers/serial/mcfserial.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/serial/mcfserial.c b/drivers/serial/mcfserial.c index f2a51e61eec7..d957a3a9edf1 100644 --- a/drivers/serial/mcfserial.c +++ b/drivers/serial/mcfserial.c @@ -1516,7 +1516,7 @@ static void mcfrs_irqinit(struct mcf_serial *info) icrp = (volatile unsigned char *) (MCF_MBAR + MCFICM_INTC0 + MCFINTC_ICR0 + MCFINT_UART0 + info->line); - *icrp = 0x33; /* UART0 with level 6, priority 3 */ + *icrp = 0x30 + info->line; /* level 6, line based priority */ imrp = (volatile unsigned long *) (MCF_MBAR + MCFICM_INTC0 + MCFINTC_IMRL); -- 2.30.2