From 089915f0f23f1a09b4aecebe88212c5a4fef37fa Mon Sep 17 00:00:00 2001 From: Jacob Keller Date: Thu, 8 Mar 2018 14:52:11 -0800 Subject: [PATCH] i40e: restore TCPv4 input set when re-enabling ATR When we re-enable ATR we need to restore the input set for TCPv4 filters, in order for ATR to function correctly. We already do this for the normal case of re-enabling ATR when disabling ntuple support. However, when re-enabling ATR after the last TCPv4 filter is removed (but when ntuple support is still active), we did not restore the TCPv4 filter input set. This can cause problems if the TCPv4 filters from FDir had changed the input set, as ATR will no longer behave as expected. When clearing the ATR auto-disable flag, make sure we restore the TCPv4 input set to avoid this. Signed-off-by: Jacob Keller Tested-by: Andrew Bowers Signed-off-by: Jeff Kirsher --- drivers/net/ethernet/intel/i40e/i40e_main.c | 9 +++++++++ 1 file changed, 9 insertions(+) diff --git a/drivers/net/ethernet/intel/i40e/i40e_main.c b/drivers/net/ethernet/intel/i40e/i40e_main.c index beb854208047..b78c06a1f82c 100644 --- a/drivers/net/ethernet/intel/i40e/i40e_main.c +++ b/drivers/net/ethernet/intel/i40e/i40e_main.c @@ -8156,6 +8156,15 @@ static void i40e_reenable_fdir_sb(struct i40e_pf *pf) static void i40e_reenable_fdir_atr(struct i40e_pf *pf) { if (pf->flags & I40E_FLAG_FD_ATR_AUTO_DISABLED) { + /* ATR uses the same filtering logic as SB rules. It only + * functions properly if the input set mask is at the default + * settings. It is safe to restore the default input set + * because there are no active TCPv4 filter rules. + */ + i40e_write_fd_input_set(pf, I40E_FILTER_PCTYPE_NONF_IPV4_TCP, + I40E_L3_SRC_MASK | I40E_L3_DST_MASK | + I40E_L4_SRC_MASK | I40E_L4_DST_MASK); + pf->flags &= ~I40E_FLAG_FD_ATR_AUTO_DISABLED; if ((pf->flags & I40E_FLAG_FD_ATR_ENABLED) && (I40E_DEBUG_FD & pf->hw.debug_mask)) -- 2.30.2