From 0ac3a3521e349922eaed8483f9079a8dc09722a5 Mon Sep 17 00:00:00 2001 From: =?utf8?q?Richard=20Fr=C3=B6hning?= Date: Sun, 2 Aug 2020 16:22:50 +0200 Subject: [PATCH] ramips: add support for TP-Link RE200 v3 MIME-Version: 1.0 Content-Type: text/plain; charset=utf8 Content-Transfer-Encoding: 8bit TP-Link RE200 v3 is a wireless range extender with Ethernet and 2.4G and 5G WiFi with internal antennas. It's based on MediaTek MT7628AN+MT7610EN like the v2. Specifications -------------- - MediaTek MT7628AN (580 Mhz) - 64 MB of RAM - 8 MB of FLASH - 2T2R 2.4 GHz and 1T1R 5 GHz - 1x 10/100 Mbps Ethernet - 8x LED (GPIO-controlled), 2x button Unverified: - UART header on PCB (57600 8n1) There are 2.4G and 5G LEDs in red and green which are controlled separately. MAC addresses ------------- MAC address assignment has been done according to the RE200 v2. The label MAC address matches the OpenWrt ethernet address. Installation ------------ Web Interface ------------- It is possible to upgrade to OpenWrt via the web interface. Simply flash the -factory.bin from OEM. In contrast to a stock firmware, this will not overwrite U-Boot. Recovery -------- Unfortunately, this devices does not offer a recovery mode or a tftp installation method. If the web interface upgrade fails, you have to open your device and attach serial console. The device has not been opened for adding support. However, it is expected that the behavior is similar to the RE200 v2. Instructions for serial console and recovery may be checked out in commit 6d6f36ae787c ("ramips: add support for TP-Link RE200 v2") or on the device's Wiki page. Signed-off-by: Richard Fröhning [adjust commit title/message, sort support list] Signed-off-by: Adrian Schmutzler --- src/tplink-safeloader.c | 44 +++++++++++++++++++++++++++++++++++++++++ 1 file changed, 44 insertions(+) diff --git a/src/tplink-safeloader.c b/src/tplink-safeloader.c index 3f83f19..a5f3ced 100644 --- a/src/tplink-safeloader.c +++ b/src/tplink-safeloader.c @@ -1562,6 +1562,50 @@ static struct device_info boards[] = { .last_sysupgrade_partition = "file-system" }, + /** Firmware layout for the RE200 v3 */ + { + .id = "RE200-V3", + .vendor = "", + .support_list = + "SupportList:\n" + "{product_name:RE200,product_ver:3.0.0,special_id:00000000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:41520000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:41550000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:42520000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:43410000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:45470000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:45530000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:45550000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:49440000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:4A500000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:4B520000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:52550000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:54570000}\n" + "{product_name:RE200,product_ver:3.0.0,special_id:55530000}\n", + .support_trail = '\x00', + .soft_ver = NULL, + + .partitions = { + {"fs-uboot", 0x00000, 0x20000}, + {"firmware", 0x20000, 0x7a0000}, + {"partition-table", 0x7c0000, 0x02000}, + {"default-mac", 0x7c2000, 0x00020}, + {"pin", 0x7c2100, 0x00020}, + {"product-info", 0x7c3100, 0x01000}, + {"soft-version", 0x7c4200, 0x01000}, + {"support-list", 0x7c5200, 0x01000}, + {"profile", 0x7c6200, 0x08000}, + {"config-info", 0x7ce200, 0x00400}, + {"user-config", 0x7d0000, 0x10000}, + {"default-config", 0x7e0000, 0x10000}, + {"radio", 0x7f0000, 0x10000}, + {NULL, 0, 0} + }, + + .first_sysupgrade_partition = "os-image", + .last_sysupgrade_partition = "file-system" + }, + /** Firmware layout for the RE220 v2 */ { .id = "RE220-V2", -- 2.30.2