From 0e548d50b95b59ccf123984bc44f17da72b12cdd Mon Sep 17 00:00:00 2001 From: Mikko Perttunen Date: Tue, 8 Jul 2014 09:30:15 +0200 Subject: [PATCH] clk: tegra: Use XUSB-compatible SATA PLL sequence Use a sequence for enabling hardware control of the SATA PLL that works both when using the SATA lane with SATA and when using it with XUSB. Signed-off-by: Mikko Perttunen --- drivers/clk/tegra/clk-pll.c | 11 +++++++++++ 1 file changed, 11 insertions(+) diff --git a/drivers/clk/tegra/clk-pll.c b/drivers/clk/tegra/clk-pll.c index f070c365f5f7..c7c6d8fb32fb 100644 --- a/drivers/clk/tegra/clk-pll.c +++ b/drivers/clk/tegra/clk-pll.c @@ -112,6 +112,9 @@ #define SATA_PLL_CFG0 0x490 #define SATA_PLL_CFG0_PADPLL_RESET_SWCTL BIT(0) +#define SATA_PLL_CFG0_PADPLL_USE_LOCKDET BIT(2) +#define SATA_PLL_CFG0_SEQ_ENABLE BIT(24) +#define SATA_PLL_CFG0_SEQ_START_STATE BIT(25) #define PLLE_MISC_PLLE_PTS BIT(8) #define PLLE_MISC_IDDQ_SW_VALUE BIT(13) @@ -1367,6 +1370,14 @@ static int clk_plle_tegra114_enable(struct clk_hw *hw) /* Enable hw control of SATA pll */ val = pll_readl(SATA_PLL_CFG0, pll); val &= ~SATA_PLL_CFG0_PADPLL_RESET_SWCTL; + val |= SATA_PLL_CFG0_PADPLL_USE_LOCKDET; + val |= SATA_PLL_CFG0_SEQ_START_STATE; + pll_writel(val, SATA_PLL_CFG0, pll); + + udelay(1); + + val = pll_readl(SATA_PLL_CFG0, pll); + val |= SATA_PLL_CFG0_SEQ_ENABLE; pll_writel(val, SATA_PLL_CFG0, pll); out: -- 2.30.2