From 0f84f29ff30bdb1bca23017b118b4ea3999cac32 Mon Sep 17 00:00:00 2001 From: Helmut Grohne Date: Fri, 3 Jun 2016 14:15:32 +0200 Subject: [PATCH] gpio: zynq: initialize clock even without CONFIG_PM When the PM initialization was moved in the commit referenced below, the code enabling the clock was removed from the probe function. On CONFIG_PM=y kernels, this is not a problem as the pm resume hook enables the clock, but when power management is disabled, all those pm_* functions are noops and the clock is never enabled resulting in a dysfunctional gpio controller. Put the clock initialization back to support CONFIG_PM=n. Cc: stable@vger.kernel.org Signed-off-by: Helmut Grohne Fixes: 3773c195d387 ("gpio: zynq: Do PM initialization earlier to support gpio hogs") Signed-off-by: Linus Walleij --- drivers/gpio/gpio-zynq.c | 7 +++++++ 1 file changed, 7 insertions(+) diff --git a/drivers/gpio/gpio-zynq.c b/drivers/gpio/gpio-zynq.c index 75c6355b018d..e72794e463aa 100644 --- a/drivers/gpio/gpio-zynq.c +++ b/drivers/gpio/gpio-zynq.c @@ -709,7 +709,13 @@ static int zynq_gpio_probe(struct platform_device *pdev) dev_err(&pdev->dev, "input clock not found.\n"); return PTR_ERR(gpio->clk); } + ret = clk_prepare_enable(gpio->clk); + if (ret) { + dev_err(&pdev->dev, "Unable to enable clock.\n"); + return ret; + } + pm_runtime_set_active(&pdev->dev); pm_runtime_enable(&pdev->dev); ret = pm_runtime_get_sync(&pdev->dev); if (ret < 0) @@ -747,6 +753,7 @@ err_pm_put: pm_runtime_put(&pdev->dev); err_pm_dis: pm_runtime_disable(&pdev->dev); + clk_disable_unprepare(gpio->clk); return ret; } -- 2.30.2