From 16728da99861bdb6e44f066d536287990e752d7b Mon Sep 17 00:00:00 2001 From: Alan Date: Tue, 20 Feb 2007 17:51:51 +0000 Subject: [PATCH] pata_sl82c105: remove un-needed code paths Remove the DMA setup function. As pointed out by Sergey we set the actual DMA clock timing in set_dmamode so we don't actually need to do anything with it at set up time, but just leave the PIO timings loaded. Signed-off-by: Alan Cox Signed-off-by: Jeff Garzik --- drivers/ata/pata_sl82c105.c | 39 +++++++++---------------------------- 1 file changed, 9 insertions(+), 30 deletions(-) diff --git a/drivers/ata/pata_sl82c105.c b/drivers/ata/pata_sl82c105.c index 96e890fd645b..07204610f0da 100644 --- a/drivers/ata/pata_sl82c105.c +++ b/drivers/ata/pata_sl82c105.c @@ -7,6 +7,13 @@ * SL82C105/Winbond 553 IDE driver * * and in part on the documentation and errata sheet + * + * + * Note: The controller like many controllers has shared timings for + * PIO and DMA. We thus flip to the DMA timings in dma_start and flip back + * in the dma_stop function. Thus we actually don't need a set_dmamode + * method as the PIO method is always called and will set the right PIO + * timing parameters. */ #include @@ -19,7 +26,7 @@ #include #define DRV_NAME "pata_sl82c105" -#define DRV_VERSION "0.2.3" +#define DRV_VERSION "0.2.5" enum { /* @@ -125,33 +132,6 @@ static void sl82c105_configure_dmamode(struct ata_port *ap, struct ata_device *a pci_read_config_word(pdev, timing, &dummy); } -/** - * sl82c105_set_dmamode - set initial DMA mode data - * @ap: ATA interface - * @adev: ATA device - * - * Called to do the DMA mode setup. This replaces the PIO timings - * for the device in question. Set appropriate PIO timings not DMA - * timings at this point. - */ - -static void sl82c105_set_dmamode(struct ata_port *ap, struct ata_device *adev) -{ - switch(adev->dma_mode) { - case XFER_MW_DMA_0: - sl82c105_configure_piomode(ap, adev, 0); - break; - case XFER_MW_DMA_1: - sl82c105_configure_piomode(ap, adev, 3); - break; - case XFER_MW_DMA_2: - sl82c105_configure_piomode(ap, adev, 4); - break; - default: - BUG(); - } -} - /** * sl82c105_reset_engine - Reset the DMA engine * @ap: ATA interface @@ -222,7 +202,7 @@ static void sl82c105_bmdma_stop(struct ata_queued_cmd *qc) /* This will redo the initial setup of the DMA device to matching PIO timings */ - sl82c105_set_dmamode(ap, qc->dev); + sl82c105_set_piomode(ap, qc->dev); } static struct scsi_host_template sl82c105_sht = { @@ -246,7 +226,6 @@ static struct scsi_host_template sl82c105_sht = { static struct ata_port_operations sl82c105_port_ops = { .port_disable = ata_port_disable, .set_piomode = sl82c105_set_piomode, - .set_dmamode = sl82c105_set_dmamode, .mode_filter = ata_pci_default_filter, .tf_load = ata_tf_load, -- 2.30.2