From 17511a7ea86a34b5a5cfd4831d3a2e8a9e0cc005 Mon Sep 17 00:00:00 2001
From: Daniel Golle <daniel@makrotopia.org>
Date: Thu, 31 May 2018 17:28:38 +0200
Subject: [PATCH] oxnas: kill old oxnas target

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
---
 target/linux/oxnas/Makefile                   |   30 -
 .../oxnas/base-files/etc/board.d/01_leds      |   27 -
 .../oxnas/base-files/etc/board.d/02_network   |   22 -
 target/linux/oxnas/base-files/etc/diag.sh     |   41 -
 .../oxnas/base-files/init.d/set-irq-affinity  |   22 -
 target/linux/oxnas/base-files/lib/oxnas.sh    |   66 -
 .../lib/preinit/01_preinit_do_oxnas.sh        |    9 -
 .../oxnas/base-files/lib/upgrade/platform.sh  |   18 -
 target/linux/oxnas/config-4.4                 |  366 --
 .../files/arch/arm/boot/dts/ox820-akitio.dts  |  147 -
 .../files/arch/arm/boot/dts/ox820-kd20.dts    |  173 -
 .../arch/arm/boot/dts/ox820-pogoplug-pro.dts  |   94 -
 .../arch/arm/boot/dts/ox820-pogoplug-v3.dts   |   91 -
 .../files/arch/arm/boot/dts/ox820-stg212.dts  |  102 -
 .../oxnas/files/arch/arm/boot/dts/ox820.dtsi  |  342 --
 .../files/arch/arm/configs/ox820_defconfig    |  104 -
 .../oxnas/files/arch/arm/mach-oxnas/Kconfig   |   25 -
 .../oxnas/files/arch/arm/mach-oxnas/Makefile  |    8 -
 .../files/arch/arm/mach-oxnas/Makefile.boot   |    2 -
 .../oxnas/files/arch/arm/mach-oxnas/fiq.S     |   87 -
 .../oxnas/files/arch/arm/mach-oxnas/headsmp.S |   27 -
 .../oxnas/files/arch/arm/mach-oxnas/hotplug.c |  111 -
 .../arm/mach-oxnas/include/mach/hardware.h    |  233 -
 .../arch/arm/mach-oxnas/include/mach/iomap.h  |   33 -
 .../arch/arm/mach-oxnas/include/mach/irqs.h   |    7 -
 .../arch/arm/mach-oxnas/include/mach/smp.h    |   34 -
 .../arch/arm/mach-oxnas/include/mach/timex.h  |    6 -
 .../arm/mach-oxnas/include/mach/uncompress.h  |   32 -
 .../arch/arm/mach-oxnas/include/mach/utils.h  |   34 -
 .../files/arch/arm/mach-oxnas/mach-ox820.c    |  183 -
 .../oxnas/files/arch/arm/mach-oxnas/platsmp.c |  315 -
 .../oxnas/files/drivers/ata/sata_oxnas.c      | 2477 --------
 .../linux/oxnas/files/drivers/clk/clk-oxnas.c |  297 -
 .../drivers/clocksource/oxnas_rps_timer.c     |   96 -
 .../oxnas/files/drivers/irqchip/irq-rps.c     |  145 -
 .../oxnas/files/drivers/mtd/nand/oxnas_nand.c |  206 -
 .../net/ethernet/stmicro/stmmac/dwmac-oxnas.c |  145 -
 .../oxnas/files/drivers/pci/host/pcie-oxnas.c |  676 ---
 .../files/drivers/pinctrl/pinctrl-oxnas.c     | 1461 -----
 .../oxnas/files/drivers/reset/reset-ox820.c   |  107 -
 .../oxnas/files/drivers/usb/host/ehci-oxnas.c |  316 -
 target/linux/oxnas/image/Makefile             |  107 -
 target/linux/oxnas/modules.mk                 |   41 -
 ...ackport-v4.7-0day-patches-from-Boris.patch | 5281 -----------------
 ...helper-reading-NAND-ECC-algo-from-DT.patch |   91 -
 ...mtd-nand-import-nand_hw_control_init.patch |  175 -
 ...-arm_introduce-dma-fiq-irq-broadcast.patch |   80 -
 .../250-add-plxtech-vendor-prefix.patch       |   10 -
 .../300-introduce-oxnas-platform.patch        |   71 -
 .../patches-4.4/310-oxnas-clocksource.patch   |   25 -
 .../oxnas/patches-4.4/320-oxnas-irqchip.patch |   34 -
 .../oxnas/patches-4.4/330-oxnas-pinctrl.patch |   28 -
 .../oxnas/patches-4.4/340-oxnas-pcie.patch    |   22 -
 .../oxnas/patches-4.4/350-oxnas-reset.patch   |   20 -
 .../oxnas/patches-4.4/400-oxnas-nand.patch    |   24 -
 .../oxnas/patches-4.4/500-oxnas-sata.patch    |   26 -
 .../oxnas/patches-4.4/700-oxnas-dwmac.patch   |   29 -
 .../oxnas/patches-4.4/800-oxnas-ehci.patch    |   26 -
 .../oxnas/patches-4.4/900-more-boards.patch   |   15 -
 .../996-ATAG_DTB_COMPAT_CMDLINE_MANGLE.patch  |  185 -
 .../oxnas/patches-4.4/999-libata-hacks.patch  |   57 -
 target/linux/oxnas/profiles/00-default.mk     |   21 -
 62 files changed, 15085 deletions(-)
 delete mode 100644 target/linux/oxnas/Makefile
 delete mode 100755 target/linux/oxnas/base-files/etc/board.d/01_leds
 delete mode 100755 target/linux/oxnas/base-files/etc/board.d/02_network
 delete mode 100644 target/linux/oxnas/base-files/etc/diag.sh
 delete mode 100755 target/linux/oxnas/base-files/init.d/set-irq-affinity
 delete mode 100755 target/linux/oxnas/base-files/lib/oxnas.sh
 delete mode 100644 target/linux/oxnas/base-files/lib/preinit/01_preinit_do_oxnas.sh
 delete mode 100644 target/linux/oxnas/base-files/lib/upgrade/platform.sh
 delete mode 100644 target/linux/oxnas/config-4.4
 delete mode 100644 target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio.dts
 delete mode 100644 target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts
 delete mode 100644 target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts
 delete mode 100644 target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts
 delete mode 100644 target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts
 delete mode 100644 target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi
 delete mode 100644 target/linux/oxnas/files/arch/arm/configs/ox820_defconfig
 delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/Kconfig
 delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile
 delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile.boot
 delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/fiq.S
 delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/headsmp.S
 delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/hotplug.c
 delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/hardware.h
 delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/iomap.h
 delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/irqs.h
 delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/smp.h
 delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/timex.h
 delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/uncompress.h
 delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/utils.h
 delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c
 delete mode 100644 target/linux/oxnas/files/arch/arm/mach-oxnas/platsmp.c
 delete mode 100644 target/linux/oxnas/files/drivers/ata/sata_oxnas.c
 delete mode 100644 target/linux/oxnas/files/drivers/clk/clk-oxnas.c
 delete mode 100644 target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c
 delete mode 100644 target/linux/oxnas/files/drivers/irqchip/irq-rps.c
 delete mode 100644 target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c
 delete mode 100644 target/linux/oxnas/files/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c
 delete mode 100644 target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c
 delete mode 100644 target/linux/oxnas/files/drivers/pinctrl/pinctrl-oxnas.c
 delete mode 100644 target/linux/oxnas/files/drivers/reset/reset-ox820.c
 delete mode 100644 target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c
 delete mode 100644 target/linux/oxnas/image/Makefile
 delete mode 100644 target/linux/oxnas/modules.mk
 delete mode 100644 target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/0073-of-mtd-prepare-helper-reading-NAND-ECC-algo-from-DT.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/0074-mtd-nand-import-nand_hw_control_init.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/010-arm_introduce-dma-fiq-irq-broadcast.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/250-add-plxtech-vendor-prefix.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/300-introduce-oxnas-platform.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/310-oxnas-clocksource.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/320-oxnas-irqchip.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/330-oxnas-pinctrl.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/340-oxnas-pcie.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/350-oxnas-reset.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/400-oxnas-nand.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/500-oxnas-sata.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/700-oxnas-dwmac.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/800-oxnas-ehci.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/900-more-boards.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/996-ATAG_DTB_COMPAT_CMDLINE_MANGLE.patch
 delete mode 100644 target/linux/oxnas/patches-4.4/999-libata-hacks.patch
 delete mode 100644 target/linux/oxnas/profiles/00-default.mk

diff --git a/target/linux/oxnas/Makefile b/target/linux/oxnas/Makefile
deleted file mode 100644
index a1f453a0db..0000000000
--- a/target/linux/oxnas/Makefile
+++ /dev/null
@@ -1,30 +0,0 @@
-#
-# Copyright (C) 2013 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-include $(TOPDIR)/rules.mk
-
-ARCH:=arm
-BOARD:=oxnas
-BOARDNAME:=PLXTECH/Oxford NAS782x/OX82x
-DEVICE_TYPE:=nas
-FEATURES:=gpio nand pcie usb ramdisk rtc squashfs ubifs source-only
-CPU_TYPE:=mpcore
-
-MAINTAINER:=Daniel Golle <daniel@makrotopia.org>
-
-KERNEL_PATCHVER:=4.4
-
-include $(INCLUDE_DIR)/target.mk
-
-DEFAULT_PACKAGES += \
-	kmod-ata-core kmod-ata-oxnas-sata kmod-button-hotplug \
-	kmod-input-gpio-keys-polled kmod-usb-ledtrig-usbport \
-	kmod-ledtrig-timer kmod-leds-gpio kmod-usb2-oxnas \
-	kmod-usb-storage uboot-envtools uboot-oxnas-ox820
-
-KERNELNAME:=zImage dtbs
-
-$(eval $(call BuildTarget))
diff --git a/target/linux/oxnas/base-files/etc/board.d/01_leds b/target/linux/oxnas/base-files/etc/board.d/01_leds
deleted file mode 100755
index 5d665093f6..0000000000
--- a/target/linux/oxnas/base-files/etc/board.d/01_leds
+++ /dev/null
@@ -1,27 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/uci-defaults.sh
-
-board=$(board_name)
-board_config_update
-
-case $board in
-	akitio)
-		ucidef_set_led_default "status" "status" "akitio:red:status" "0"
-		;;
-	stg212)
-		ucidef_set_led_default "power" "power" "zyxel:blue:status" "1"
-		ucidef_set_led_usbdev "usb" "USB" "zyxel:orange:copy" "1-1"
-		;;
-	kd20)
-		ucidef_set_led_default "power" "power" "kd20:blue:status" "1"
-		;;
-	pogoplug-pro | pogoplug-v3)
-		ucidef_set_led_default "power" "power" "pogoplug:blue:internal" "1"
-		;;
-
-esac
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/oxnas/base-files/etc/board.d/02_network b/target/linux/oxnas/base-files/etc/board.d/02_network
deleted file mode 100755
index 7ecaed51bf..0000000000
--- a/target/linux/oxnas/base-files/etc/board.d/02_network
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh
-
-. /lib/functions/uci-defaults.sh
-. /lib/functions/system.sh
-. /lib/oxnas.sh
-
-board_config_update
-
-lan_mac=""
-
-case "$(board_name)" in
-	kd20)
-		lan_mac="$(legacy_boot_mac_adr)"
-		;;
-esac
-
-ucidef_set_interface_lan "eth0" "dhcp"
-[ -n "$lan_mac" ] && ucidef_set_interface_macaddr "lan" "$lan_mac"
-
-board_config_flush
-
-exit 0
diff --git a/target/linux/oxnas/base-files/etc/diag.sh b/target/linux/oxnas/base-files/etc/diag.sh
deleted file mode 100644
index fd3bc3b336..0000000000
--- a/target/linux/oxnas/base-files/etc/diag.sh
+++ /dev/null
@@ -1,41 +0,0 @@
-#!/bin/sh
-# Copyright (C) 2009-2013 OpenWrt.org
-
-. /lib/functions.sh
-. /lib/functions/leds.sh
-
-get_status_led() {
-	case $(board_name) in
-	akitio)
-		status_led="akitio:red:status"
-		;;
-	stg212)
-		status_led="zyxel:blue:status"
-		;;
-	kd20)
-		status_led="kd20:blue:status"
-		;;
-	pogoplug-pro | pogoplug-v3)
-		status_led="pogoplug:blue:internal"
-		;;
-	esac
-}
-
-set_state() {
-	get_status_led
-
-	case "$1" in
-	preinit)
-		status_led_blink_preinit
-		;;
-	failsafe)
-		status_led_blink_failsafe
-		;;
-	preinit_regular)
-		status_led_blink_preinit_regular
-		;;
-	done)
-		status_led_on
-		;;
-	esac
-}
diff --git a/target/linux/oxnas/base-files/init.d/set-irq-affinity b/target/linux/oxnas/base-files/init.d/set-irq-affinity
deleted file mode 100755
index 8ab066ff4c..0000000000
--- a/target/linux/oxnas/base-files/init.d/set-irq-affinity
+++ /dev/null
@@ -1,22 +0,0 @@
-#!/bin/sh /etc/rc.common
-
-START=99
-
-get_irq() {
-	local name="$1"
-	grep -m 1 "$name" /proc/interrupts | cut -d: -f1 | sed 's, *,,'
-}
-
-set_irq_affinity() {
-	local name="$1"
-	local val="$2"
-	local irq="$(get_irq "$name")"
-	[ -n "$irq" ] || return
-	echo "$val" > "/proc/irq/$irq/smp_affinity"
-}
-
-start() {
-	set_irq_affinity ehci_hcd 2
-	set_irq_affinity xhci_hcd 2
-	set_irq_affinity sata 2
-}
diff --git a/target/linux/oxnas/base-files/lib/oxnas.sh b/target/linux/oxnas/base-files/lib/oxnas.sh
deleted file mode 100755
index 671dd05fa2..0000000000
--- a/target/linux/oxnas/base-files/lib/oxnas.sh
+++ /dev/null
@@ -1,66 +0,0 @@
-#!/bin/sh
-#
-# Copyright (C) 2013 OpenWrt.org
-#
-
-OXNAS_BOARD_NAME=
-OXNAS_MODEL=
-
-bootloader_cmdline_var() {
-	local param
-	local pval
-	for arg in $(cat /proc/device-tree/chosen/bootloader-args); do
-		param="$(echo $arg | cut -d'=' -f 1)"
-		pval="$(echo $arg | cut -d'=' -f 2-)"
-
-		if [ "$param" = "$1" ]; then
-			echo "$pval"
-		fi
-	done
-}
-
-legacy_boot_mac_adr() {
-	local macstr
-	local oIFS
-	macstr="$(bootloader_cmdline_var mac_adr)"
-	oIFS="$IFS"
-	IFS=","
-	set -- $macstr
-	printf "%02x:%02x:%02x:%02x:%02x:%02x" $1 $2 $3 $4 $5 $6
-	IFS="$oIFS"
-}
-
-oxnas_board_detect() {
-	local machine
-	local name
-
-	machine=$(cat /proc/device-tree/model)
-
-	case "$machine" in
-	*"Akitio MyCloud mini"*)
-		name="akitio"
-		;;
-	*"MitraStar Technology Corp. STG-212"*)
-		name="stg212"
-		;;
-	*"Shuttle KD20"*)
-		name="kd20"
-		;;
-	*"Pogoplug Pro"*)
-		name="pogoplug-pro"
-		;;
-	*"Pogoplug V3"*)
-		name="pogoplug-v3"
-		;;
-	esac
-
-	[ -z "$name" ] && name="unknown"
-
-	[ -z "$OXNAS_BOARD_NAME" ] && OXNAS_BOARD_NAME="$name"
-	[ -z "$OXNAS_MODEL" ] && OXNAS_MODEL="$machine"
-
-	[ -e "/tmp/sysinfo/" ] || mkdir -p "/tmp/sysinfo/"
-
-	echo "$OXNAS_BOARD_NAME" > /tmp/sysinfo/board_name
-	echo "$OXNAS_MODEL" > /tmp/sysinfo/model
-}
diff --git a/target/linux/oxnas/base-files/lib/preinit/01_preinit_do_oxnas.sh b/target/linux/oxnas/base-files/lib/preinit/01_preinit_do_oxnas.sh
deleted file mode 100644
index ca7bce1054..0000000000
--- a/target/linux/oxnas/base-files/lib/preinit/01_preinit_do_oxnas.sh
+++ /dev/null
@@ -1,9 +0,0 @@
-#!/bin/sh
-
-do_oxnas() {
-	. /lib/oxnas.sh
-
-	oxnas_board_detect
-}
-
-boot_hook_add preinit_main do_oxnas
diff --git a/target/linux/oxnas/base-files/lib/upgrade/platform.sh b/target/linux/oxnas/base-files/lib/upgrade/platform.sh
deleted file mode 100644
index 059d75f9a9..0000000000
--- a/target/linux/oxnas/base-files/lib/upgrade/platform.sh
+++ /dev/null
@@ -1,18 +0,0 @@
-#
-# Copyright (C) 2014 OpenWrt.org
-#
-
-REQUIRE_IMAGE_METADATA=1
-
-platform_check_image() {
-	local board=$(board_name)
-
-	[ "$ARGC" -gt 1 ] && return 1
-
-	nand_do_platform_check $board $1
-	return $?
-}
-
-platform_do_upgrade() {
-	nand_do_upgrade $1
-}
diff --git a/target/linux/oxnas/config-4.4 b/target/linux/oxnas/config-4.4
deleted file mode 100644
index 0c6e992510..0000000000
--- a/target/linux/oxnas/config-4.4
+++ /dev/null
@@ -1,366 +0,0 @@
-CONFIG_ALIGNMENT_TRAP=y
-# CONFIG_APM_EMULATION is not set
-CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y
-CONFIG_ARCH_HAS_ELF_RANDOMIZE=y
-CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y
-CONFIG_ARCH_HAS_RESET_CONTROLLER=y
-CONFIG_ARCH_HAS_SG_CHAIN=y
-CONFIG_ARCH_HAS_TICK_BROADCAST=y
-CONFIG_ARCH_HAVE_CUSTOM_GPIO_H=y
-CONFIG_ARCH_HIBERNATION_POSSIBLE=y
-CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y
-CONFIG_ARCH_NR_GPIO=0
-CONFIG_ARCH_OXNAS=y
-CONFIG_ARCH_REQUIRE_GPIOLIB=y
-# CONFIG_ARCH_SELECT_MEMORY_MODEL is not set
-# CONFIG_ARCH_SPARSEMEM_DEFAULT is not set
-CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y
-CONFIG_ARCH_SUPPORTS_UPROBES=y
-CONFIG_ARCH_SUSPEND_POSSIBLE=y
-CONFIG_ARCH_USE_BUILTIN_BSWAP=y
-CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y
-CONFIG_ARCH_WANT_GENERAL_HUGETLB=y
-CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y
-CONFIG_ARCH_WANT_LIBATA_LEDS=y
-CONFIG_ARM=y
-CONFIG_ARM_APPENDED_DTB=y
-CONFIG_ARM_ATAG_DTB_COMPAT=y
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND is not set
-# CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_FROM_BOOTLOADER is not set
-CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE=y
-CONFIG_ARM_CPUIDLE=y
-# CONFIG_ARM_CPU_SUSPEND is not set
-CONFIG_ARM_DMA_IOMMU_ALIGNMENT=8
-CONFIG_ARM_DMA_USE_IOMMU=y
-CONFIG_ARM_GIC=y
-CONFIG_ARM_HAS_SG_CHAIN=y
-CONFIG_ARM_L1_CACHE_SHIFT=5
-CONFIG_ARM_PATCH_PHYS_VIRT=y
-CONFIG_ARM_SMMU=y
-CONFIG_ARM_THUMB=y
-CONFIG_ARM_UNWIND=y
-CONFIG_ATAGS=y
-CONFIG_ATA_LEDS=y
-CONFIG_AUTO_ZRELADDR=y
-CONFIG_BLK_DEV_BSG=y
-# CONFIG_BLK_DEV_INITRD is not set
-CONFIG_BLK_DEV_SD=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC=y
-CONFIG_BOOTPARAM_HUNG_TASK_PANIC_VALUE=1
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC=y
-CONFIG_BOOTPARAM_SOFTLOCKUP_PANIC_VALUE=1
-# CONFIG_CACHE_L2X0 is not set
-CONFIG_CLKDEV_LOOKUP=y
-CONFIG_CLKSRC_MMIO=y
-CONFIG_CLKSRC_OF=y
-CONFIG_CLKSRC_PROBE=y
-CONFIG_CLKSRC_RPS_TIMER=y
-CONFIG_CLONE_BACKWARDS=y
-CONFIG_CMDLINE="console=ttyS0,115200n8 earlyprintk=serial"
-CONFIG_CMDLINE_FROM_BOOTLOADER=y
-CONFIG_COMMON_CLK=y
-CONFIG_COMPACTION=y
-CONFIG_CONSOLE_POLL=y
-CONFIG_COREDUMP=y
-CONFIG_CPU_32v6=y
-CONFIG_CPU_32v6K=y
-CONFIG_CPU_ABRT_EV6=y
-# CONFIG_CPU_BPREDICT_DISABLE is not set
-CONFIG_CPU_CACHE_V6=y
-CONFIG_CPU_CACHE_VIPT=y
-CONFIG_CPU_COPY_V6=y
-CONFIG_CPU_CP15=y
-CONFIG_CPU_CP15_MMU=y
-CONFIG_CPU_HAS_ASID=y
-# CONFIG_CPU_ICACHE_DISABLE is not set
-CONFIG_CPU_IDLE=y
-CONFIG_CPU_IDLE_GOV_LADDER=y
-CONFIG_CPU_IDLE_GOV_MENU=y
-CONFIG_CPU_PABRT_V6=y
-CONFIG_CPU_PM=y
-CONFIG_CPU_RMAP=y
-# CONFIG_CPU_SW_DOMAIN_PAN is not set
-CONFIG_CPU_TLB_V6=y
-CONFIG_CPU_V6K=y
-CONFIG_CRC16=y
-# CONFIG_CRC32_SARWATE is not set
-CONFIG_CRC32_SLICEBY8=y
-CONFIG_CRYPTO_DEFLATE=y
-CONFIG_CRYPTO_LZO=y
-CONFIG_CRYPTO_RNG2=y
-CONFIG_CRYPTO_WORKQUEUE=y
-CONFIG_DCACHE_WORD_ACCESS=y
-CONFIG_DEBUG_ICEDCC=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_INCLUDE="debug/icedcc.S"
-# CONFIG_DEBUG_UART_8250 is not set
-# CONFIG_DEBUG_USER is not set
-CONFIG_DEFAULT_HUNG_TASK_TIMEOUT=16
-CONFIG_DEPRECATED_PARAM_STRUCT=y
-CONFIG_DETECT_HUNG_TASK=y
-CONFIG_DMADEVICES=y
-CONFIG_DMA_CACHE_FIQ_BROADCAST=y
-# CONFIG_DMA_CACHE_RWFO is not set
-CONFIG_DMA_ENGINE=y
-CONFIG_DMA_OF=y
-CONFIG_DNOTIFY=y
-CONFIG_DTC=y
-CONFIG_DT_IDLE_STATES=y
-CONFIG_DWMAC_GENERIC=y
-CONFIG_DWMAC_OXNAS=y
-# CONFIG_DWMAC_SUNXI is not set
-# CONFIG_DW_DMAC_PCI is not set
-CONFIG_EARLY_PRINTK=y
-CONFIG_EDAC_ATOMIC_SCRUB=y
-CONFIG_EDAC_SUPPORT=y
-CONFIG_FIQ=y
-CONFIG_FIX_EARLYCON_MEM=y
-CONFIG_GENERIC_ALLOCATOR=y
-CONFIG_GENERIC_BUG=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y
-CONFIG_GENERIC_IDLE_POLL_SETUP=y
-CONFIG_GENERIC_IO=y
-CONFIG_GENERIC_IRQ_SHOW=y
-CONFIG_GENERIC_IRQ_SHOW_LEVEL=y
-CONFIG_GENERIC_PCI_IOMAP=y
-CONFIG_GENERIC_PINCONF=y
-CONFIG_GENERIC_SCHED_CLOCK=y
-CONFIG_GENERIC_SMP_IDLE_THREAD=y
-CONFIG_GENERIC_STRNCPY_FROM_USER=y
-CONFIG_GENERIC_STRNLEN_USER=y
-CONFIG_GPIOLIB=y
-CONFIG_GPIO_DEVRES=y
-CONFIG_GPIO_GENERIC=y
-CONFIG_GPIO_GENERIC_PLATFORM=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_HANDLE_DOMAIN_IRQ=y
-CONFIG_HARDIRQS_SW_RESEND=y
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT_MAP=y
-# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set
-CONFIG_HAVE_ARCH_AUDITSYSCALL=y
-# CONFIG_HAVE_ARCH_BITREVERSE is not set
-CONFIG_HAVE_ARCH_JUMP_LABEL=y
-CONFIG_HAVE_ARCH_KGDB=y
-CONFIG_HAVE_ARCH_PFN_VALID=y
-CONFIG_HAVE_ARCH_SECCOMP_FILTER=y
-CONFIG_HAVE_ARCH_TRACEHOOK=y
-CONFIG_HAVE_ARM_SCU=y
-CONFIG_HAVE_ARM_TWD=y
-# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set
-CONFIG_HAVE_BPF_JIT=y
-CONFIG_HAVE_CC_STACKPROTECTOR=y
-CONFIG_HAVE_CLK=y
-CONFIG_HAVE_CLK_PREPARE=y
-CONFIG_HAVE_CONTEXT_TRACKING=y
-CONFIG_HAVE_C_RECORDMCOUNT=y
-CONFIG_HAVE_DEBUG_KMEMLEAK=y
-CONFIG_HAVE_DMA_API_DEBUG=y
-CONFIG_HAVE_DMA_ATTRS=y
-CONFIG_HAVE_DMA_CONTIGUOUS=y
-CONFIG_HAVE_DYNAMIC_FTRACE=y
-CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y
-CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y
-CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y
-CONFIG_HAVE_FUNCTION_TRACER=y
-CONFIG_HAVE_GENERIC_DMA_COHERENT=y
-CONFIG_HAVE_IDE=y
-CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y
-CONFIG_HAVE_MEMBLOCK=y
-CONFIG_HAVE_MOD_ARCH_SPECIFIC=y
-CONFIG_HAVE_NET_DSA=y
-CONFIG_HAVE_OPROFILE=y
-CONFIG_HAVE_OPTPROBES=y
-CONFIG_HAVE_PERF_EVENTS=y
-CONFIG_HAVE_PERF_REGS=y
-CONFIG_HAVE_PERF_USER_STACK_DUMP=y
-CONFIG_HAVE_PROC_CPU=y
-CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y
-CONFIG_HAVE_SMP=y
-CONFIG_HAVE_SYSCALL_TRACEPOINTS=y
-CONFIG_HAVE_UID16=y
-CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y
-CONFIG_HOTPLUG_CPU=y
-CONFIG_HZ_FIXED=0
-CONFIG_I2C=y
-CONFIG_I2C_ALGOBIT=y
-CONFIG_I2C_BOARDINFO=y
-CONFIG_ICPLUS_PHY=y
-CONFIG_INPUT=y
-# CONFIG_INPUT_MISC is not set
-CONFIG_IOMMU_API=y
-CONFIG_IOMMU_HELPER=y
-CONFIG_IOMMU_IO_PGTABLE=y
-CONFIG_IOMMU_IO_PGTABLE_LPAE=y
-# CONFIG_IOMMU_IO_PGTABLE_LPAE_SELFTEST is not set
-CONFIG_IOMMU_SUPPORT=y
-# CONFIG_IP_ADVANCED_ROUTER is not set
-# CONFIG_IP_MULTICAST is not set
-CONFIG_IP_PNP=y
-# CONFIG_IP_PNP_BOOTP is not set
-CONFIG_IP_PNP_DHCP=y
-# CONFIG_IP_PNP_RARP is not set
-CONFIG_IRQCHIP=y
-CONFIG_IRQ_DOMAIN=y
-CONFIG_IRQ_DOMAIN_HIERARCHY=y
-CONFIG_IRQ_FORCED_THREADING=y
-CONFIG_IRQ_TIME_ACCOUNTING=y
-CONFIG_IRQ_WORK=y
-# CONFIG_ISDN is not set
-# CONFIG_JFFS2_FS is not set
-CONFIG_JUMP_LABEL=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KGDB=y
-# CONFIG_KGDB_KDB is not set
-CONFIG_KGDB_SERIAL_CONSOLE=y
-# CONFIG_KGDB_TESTS is not set
-# CONFIG_LDM_DEBUG is not set
-CONFIG_LDM_PARTITION=y
-# CONFIG_LEDS_TRIGGER_DEFAULT_ON is not set
-# CONFIG_LEDS_TRIGGER_NETDEV is not set
-# CONFIG_LEDS_TRIGGER_TIMER is not set
-CONFIG_LIBFDT=y
-CONFIG_LOCKUP_DETECTOR=y
-CONFIG_LOCK_SPIN_ON_OWNER=y
-CONFIG_LZO_COMPRESS=y
-CONFIG_LZO_DECOMPRESS=y
-CONFIG_MACH_OX820=y
-CONFIG_MAGIC_SYSRQ=y
-CONFIG_MAILBOX=y
-# CONFIG_MAILBOX_TEST is not set
-CONFIG_MDIO_BOARDINFO=y
-CONFIG_MFD_SYSCON=y
-CONFIG_MIGHT_HAVE_PCI=y
-CONFIG_MIGRATION=y
-CONFIG_MODULES_USE_ELF_REL=y
-# CONFIG_MODULE_STRIPPED is not set
-# CONFIG_MTD_CFI is not set
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_ECC=y
-CONFIG_MTD_NAND_OXNAS=y
-# CONFIG_MTD_SPLIT_FIRMWARE is not set
-CONFIG_MTD_UBI=y
-CONFIG_MTD_UBI_BEB_LIMIT=20
-CONFIG_MTD_UBI_BLOCK=y
-# CONFIG_MTD_UBI_FASTMAP is not set
-# CONFIG_MTD_UBI_GLUEBI is not set
-CONFIG_MTD_UBI_WL_THRESHOLD=4096
-CONFIG_MULTI_IRQ_HANDLER=y
-CONFIG_MUTEX_SPIN_ON_OWNER=y
-CONFIG_NEED_DMA_MAP_STATE=y
-CONFIG_NEED_SG_DMA_LENGTH=y
-CONFIG_NET_FLOW_LIMIT=y
-CONFIG_NET_PTP_CLASSIFY=y
-CONFIG_NLS=y
-CONFIG_NO_BOOTMEM=y
-CONFIG_NO_HZ_COMMON=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_NR_CPUS=2
-CONFIG_OF=y
-CONFIG_OF_ADDRESS=y
-CONFIG_OF_ADDRESS_PCI=y
-CONFIG_OF_EARLY_FLATTREE=y
-CONFIG_OF_FLATTREE=y
-CONFIG_OF_GPIO=y
-CONFIG_OF_IOMMU=y
-CONFIG_OF_IRQ=y
-CONFIG_OF_MDIO=y
-CONFIG_OF_MTD=y
-CONFIG_OF_NET=y
-CONFIG_OF_PCI=y
-CONFIG_OF_PCI_IRQ=y
-CONFIG_OF_RESERVED_MEM=y
-CONFIG_OLD_SIGACTION=y
-CONFIG_OLD_SIGSUSPEND3=y
-CONFIG_PAGE_OFFSET=0xC0000000
-CONFIG_PCI=y
-CONFIG_PCIEAER=y
-CONFIG_PCIEASPM=y
-# CONFIG_PCIEASPM_DEBUG is not set
-CONFIG_PCIEASPM_DEFAULT=y
-# CONFIG_PCIEASPM_PERFORMANCE is not set
-# CONFIG_PCIEASPM_POWERSAVE is not set
-CONFIG_PCIEPORTBUS=y
-CONFIG_PCIE_PME=y
-# CONFIG_PCI_DOMAINS_GENERIC is not set
-CONFIG_PCI_OXNAS=y
-CONFIG_PERF_USE_VMALLOC=y
-CONFIG_PGTABLE_LEVELS=2
-CONFIG_PHYLIB=y
-CONFIG_PINCTRL=y
-CONFIG_PINCTRL_OXNAS=y
-CONFIG_PLXTECH_RPS=y
-CONFIG_PM=y
-CONFIG_PM_CLK=y
-# CONFIG_PM_DEBUG is not set
-CONFIG_POWER_RESET=y
-CONFIG_POWER_RESET_GPIO=y
-CONFIG_POWER_RESET_SYSCON_POWEROFF=y
-CONFIG_POWER_SUPPLY=y
-CONFIG_PPS=y
-CONFIG_PRINTK_TIME=y
-CONFIG_PTP_1588_CLOCK=y
-CONFIG_PWM=y
-CONFIG_PWM_SYSFS=y
-CONFIG_RAS=y
-CONFIG_RATIONAL=y
-CONFIG_RCU_CPU_STALL_TIMEOUT=21
-CONFIG_RCU_STALL_COMMON=y
-CONFIG_REALTEK_PHY=y
-CONFIG_REGMAP=y
-CONFIG_REGMAP_MMIO=y
-CONFIG_RELAY=y
-CONFIG_RESET_CONTROLLER=y
-CONFIG_RESET_CONTROLLER_OXNAS=y
-CONFIG_RFS_ACCEL=y
-CONFIG_RPS=y
-CONFIG_RTC_CLASS=y
-# CONFIG_RTC_DRV_CMOS is not set
-CONFIG_RWSEM_SPIN_ON_OWNER=y
-CONFIG_RWSEM_XCHGADD_ALGORITHM=y
-# CONFIG_SCHED_INFO is not set
-CONFIG_SCSI=y
-CONFIG_SERIAL_8250_FSL=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_PCI=y
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-# CONFIG_SERIAL_KGDB_NMI is not set
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_SMP=y
-CONFIG_SMP_ON_UP=y
-CONFIG_SRCU=y
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_PLATFORM=y
-# CONFIG_STRIP_ASM_SYMS is not set
-CONFIG_SWIOTLB=y
-CONFIG_SYS_SUPPORTS_APM_EMULATION=y
-CONFIG_TREE_RCU=y
-CONFIG_UBIFS_FS=y
-# CONFIG_UBIFS_FS_ADVANCED_COMPR is not set
-CONFIG_UBIFS_FS_LZO=y
-CONFIG_UBIFS_FS_ZLIB=y
-CONFIG_UNCOMPRESS_INCLUDE="mach/uncompress.h"
-CONFIG_USB=y
-CONFIG_USB_COMMON=y
-# CONFIG_USB_EHCI_HCD is not set
-CONFIG_USB_SUPPORT=y
-# CONFIG_USB_UHCI_HCD is not set
-CONFIG_USE_OF=y
-CONFIG_VECTORS_BASE=0xffff0000
-# CONFIG_VFIO is not set
-# CONFIG_VFP is not set
-CONFIG_VM_EVENT_COUNTERS=y
-CONFIG_WATCHDOG_CORE=y
-CONFIG_WATCHDOG_NOWAYOUT=y
-CONFIG_XPS=y
-CONFIG_XZ_DEC_ARM=y
-CONFIG_XZ_DEC_BCJ=y
-CONFIG_ZBOOT_ROM_BSS=0
-CONFIG_ZBOOT_ROM_TEXT=0
-CONFIG_ZLIB_DEFLATE=y
-CONFIG_ZLIB_INFLATE=y
-CONFIG_ZONE_DMA_FLAG=0
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio.dts
deleted file mode 100644
index 54aad1d86c..0000000000
--- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-akitio.dts
+++ /dev/null
@@ -1,147 +0,0 @@
-/*
- * Copyright (C) 2016 Daniel Golle <daniel@makrotopia.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include "ox820.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Akitio MyCloud mini";
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk=serial";
-	};
-
-	pcie-controller@47C00000 {
-		status = "disabled";
-	};
-
-	uart@44200000 {
-		status = "okay";
-	};
-
-	sata@45900000 {
-		status = "okay";
-		nr-ports = <2>;
-	};
-
-	nand@41000000 {
-		status = "okay";
-
-	};
-
-	ethernet@40400000 {
-		status = "okay";
-	};
-
-	ehci@40200100 {
-		status = "okay";
-	};
-
-	i2c-gpio {
-		compatible = "i2c-gpio";
-		gpios = <&GPIOB 9 0 &GPIOB 10 0>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_i2c>;
-		i2c-gpio,delay-us = <10>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		ds1307: rtc@68 {
-			compatible = "dallas,ds1307";
-			reg = <0x68>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_buttons>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-		power {
-			label = "power";
-			gpios = <&GPIOA 11 1>;
-			linux,code = <KEY_POWER>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&GPIOB 6 1>;
-			linux,code = <KEY_RESTART>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-		status {
-			label = "akitio:red:status";
-			gpios = <&GPIOA 29 0>;
-		};
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_poweroff>;
-		gpios = <&GPIOB 13 2>;
-	};
-
-	pinctrl {
-		i2c {
-			pinctrl_i2c: i2c-0 {
-				plxtech,pins =
-					<1  9 0 4	/* MF_B9 GPIO debounce */
-					 1 10 0 4>;	/* MF_B10 GPIO debounce */
-			};
-		};
-		buttons {
-			pinctrl_buttons: buttons-0 {
-				plxtech,pins =
-					<0 11 0 0	/* MF_A11 GPIO */
-					 1  6 0 0>;	/* MF_B6 GPIO */
-			};
-		};
-		leds {
-			pinctrl_leds: leds-0 {
-				plxtech,pins =
-					<0 29 0 0>;	/* MF_A29 GPIO */
-			};
-		};
-		poweroff {
-			pinctrl_poweroff: poweroff-0 {
-				plxtech,pins =
-					<1 13 0 0>;	/* MF_B13 GPIO */
-			};
-		};
-	};
-};
-
-&nandc {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		nand-ecc-mode = "soft";
-		nand-ecc-algo = "hamming";
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x026c0000>;
-		};
-
-		partition@26c0000 {
-			label = "ubi";
-			reg = <0x026c0000 0x0d940000>;
-		};
-	};
-};
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts
deleted file mode 100644
index a59addccac..0000000000
--- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-kd20.dts
+++ /dev/null
@@ -1,173 +0,0 @@
-/*
- * Copyright (C) 2014 Daniel Golle <daniel@makrotopia.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include "ox820.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "Shuttle KD20";
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk=serial mem=256M";
-	};
-
-	pcie-controller@47C00000 {
-		status = "okay";
-	};
-
-	uart@44200000 {
-		status = "okay";
-	};
-
-	sata@45900000 {
-		status = "okay";
-		nr-ports = <2>;
-	};
-
-	ethernet@40400000 {
-		status = "okay";
-		snps,phy-addr = <1>;
-		phy-mode = "rgmii-id";
-	};
-
-	ehci@40200100 {
-		status = "okay";
-	};
-
-	i2c-gpio {
-		compatible = "i2c-gpio";
-		gpios = <&GPIOB 9 0 &GPIOB 10 0>;
-		i2c-gpio,delay-us = <10>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		pcf8563: rtc@51 {
-			compatible = "nxp,pcf8563";
-			reg = <0x51>;
-		};
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		power {
-			label = "power";
-			gpios = <&GPIOA 10 1>;
-			linux,code = <KEY_POWER>;
-		};
-		reset {
-			label = "reset";
-			gpios = <&GPIOA 11 1>;
-			linux,code = <KEY_RESTART>;
-		};
-		eject1 {
-			label = "eject1";
-			gpios = <&GPIOA 5 1>;
-			linux,code = <KEY_EJECTCD>;
-		};
-		eject2 {
-			label = "eject2";
-			gpios = <&GPIOA 6 1>;
-			linux,code = <162>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		status {
-			label = "kd20:blue:status";
-			gpios = <&GPIOB 16 0>;
-		};
-		status2 {
-			label = "kd20:red:status";
-			gpios = <&GPIOB 17 0>;
-		};
-		hdd1blue {
-			label = "kd20:blue:hdd1";
-			gpios = <&GPIOA 27 0>;
-			linux,default-trigger = "ata1";
-		};
-		hdd1red {
-			label = "kd20:red:hdd1";
-			gpios = <&GPIOB 4 0>;
-		};
-		hdd2blue {
-			label = "kd20:blue:hdd2";
-			gpios = <&GPIOB 6 0>;
-			linux,default-trigger = "ata2";
-		};
-		hdd2red {
-			label = "kd20:red:hdd2";
-			gpios = <&GPIOB 7 0>;
-		};
-		usb {
-			label = "kd20:blue:usb";
-			gpios = <&GPIOB 8 0>;
-		};
-	};
-
-	beeper: beeper {
-		compatible = "gpio-beeper";
-		gpios = <&GPIOB 11 0>;
-	};
-
-	gpio-fan {
-		compatible = "gpio-fan";
-		gpios = <&GPIOA 2 1>;
-		gpio-fan,speed-map = <0    0
-				      3000 1>;
-	};
-
-	gpio-poweroff {
-		compatible = "gpio-poweroff";
-		gpios = <&GPIOA 9 0>;
-	};
-};
-
-&nandc {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		nand-ecc-mode = "soft";
-		nand-ecc-algo = "hamming";
-
-		partition@0 {
-			label = "stage1";
-			reg = <0x00000000 0x00040000>;
-			read-only;
-		};
-
-		partition@40000 {
-			label = "u-boot";
-			reg = <0x00040000 0x00200000>;
-			read-only;
-		};
-
-		partition@240000 {
-			label = "initrd";
-			reg = <0x00240000 0x00600000>;
-		};
-
-		partition@840000 {
-			label = "kernel";
-			reg = <0x00840000 0x007C0000>;
-		};
-
-		partition@e00000 {
-			label = "ubi";
-			reg = <0x01000000 0x07000000>;
-		};
-	};
-};
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts
deleted file mode 100644
index 5b087e93fa..0000000000
--- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-pro.dts
+++ /dev/null
@@ -1,94 +0,0 @@
-/*
- * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include "ox820.dtsi"
-
-/ {
-	model = "Pogoplug Pro";
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk=serial";
-	};
-
-	pcie-controller@47C00000 {
-		status = "okay";
-	};
-
-	uart@44200000 {
-		status = "okay";
-	};
-
-	sata@45900000 {
-		status = "okay";
-	};
-
-	ethernet@40400000 {
-		status = "okay";
-	};
-
-	ehci@40200100 {
-		status = "okay";
-	};
-
-	pinctrl {
-		leds {
-			pinctrl_leds: leds-0 {
-				plxtech,pins =
-					<0 2 0 0	/* MF_A2 */
-					 1 16 0 0	/* MF_B16 */
-					 1 17 0 0>;	/* MF_B17 */
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		blue {
-			label = "pogoplug:blue:internal";
-			gpios = <&GPIOA 2 0>;
-
-		};
-
-		orange {
-			label = "pogoplug:orange:usr";
-			gpios = <&GPIOB 16 1>;
-		};
-
-		green {
-			label = "pogoplug:green:usr";
-			gpios = <&GPIOB 17 1>;
-		};
-	};
-};
-
-&nandc {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		nand-ecc-mode = "soft";
-		nand-ecc-algo = "hamming";
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00e00000>;
-			/*read-only;*/
-		};
-
-		partition@e00000 {
-			label = "ubi";
-			reg = <0x00e00000 0x07200000>;
-		};
-	};
-};
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts
deleted file mode 100644
index be0f6c9077..0000000000
--- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-pogoplug-v3.dts
+++ /dev/null
@@ -1,91 +0,0 @@
-/*
- * Copyright (C) 2014 Daniel Golle <daniel@makrotopia.org>
- * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-#include "ox820.dtsi"
-
-/ {
-	model = "Pogoplug V3";
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk=serial";
-	};
-
-	uart@44200000 {
-		status = "okay";
-	};
-
-	sata@45900000 {
-		status = "okay";
-	};
-
-	ethernet@40400000 {
-		status = "okay";
-	};
-
-	ehci@40200100 {
-		status = "okay";
-	};
-
-	pinctrl {
-		leds {
-			pinctrl_leds: leds-0 {
-				plxtech,pins =
-					<0 2 0 0	/* MF_A2 */
-					 1 16 0 0	/* MF_B16 */
-					 1 17 0 0>;	/* MF_B17 */
-			};
-		};
-	};
-
-	leds {
-		compatible = "gpio-leds";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_leds>;
-
-		blue {
-			label = "pogoplug:blue:internal";
-			gpios = <&GPIOA 2 0>;
-		};
-
-		orange {
-			label = "pogoplug:orange:usr";
-			gpios = <&GPIOB 16 1>;
-		};
-
-		green {
-			label = "pogoplug:green:usr";
-			gpios = <&GPIOB 17 1>;
-		};
-	};
-
-};
-
-&nandc {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		nand-ecc-mode = "soft";
-		nand-ecc-algo = "hamming";
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00e00000>;
-			/*read-only;*/
-		};
-
-		partition@e00000 {
-			label = "ubi";
-			reg = <0x00e00000 0x07200000>;
-		};
-	};
-};
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts b/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts
deleted file mode 100644
index ad93d4ec15..0000000000
--- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820-stg212.dts
+++ /dev/null
@@ -1,102 +0,0 @@
-/*
- * Copyright (C) 2013 OpenWrt.org
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-/dts-v1/;
-
-#include "ox820.dtsi"
-
-#include <dt-bindings/input/input.h>
-
-/ {
-	model = "MitraStar Technology Corp. STG-212";
-
-	chosen {
-		bootargs = "console=ttyS0,115200n8 earlyprintk=serial mem=128M";
-	};
-
-	uart@44200000 {
-		status = "okay";
-	};
-
-	sata@45900000 {
-		status = "okay";
-	};
-
-
-	ethernet@40400000 {
-		status = "okay";
-	};
-
-	ehci@40200100 {
-		status = "okay";
-	};
-
-	gpio-keys-polled {
-		compatible = "gpio-keys-polled";
-		#address-cells = <1>;
-		#size-cells = <0>;
-		poll-interval = <100>;
-
-		reset {
-			label = "reset";
-			gpios = <&GPIOB 11 1>;
-			linux,code = <KEY_RESTART>;
-		};
-		copy {
-			label = "copy";
-			gpios = <&GPIOB 13 1>;
-			linux,code = <KEY_COPY>;
-		};
-	};
-
-	gpio-leds {
-		compatible = "gpio-leds";
-		status {
-			label = "zyxel:blue:status";
-			gpios = <&GPIOB 5 0>;
-		};
-		status2 {
-			label = "zyxel:red:status";
-			gpios = <&GPIOB 6 1>;
-		};
-		copy {
-			label = "zyxel:orange:copy";
-			gpios = <&GPIOB 8 1>;
-		};
-	};
-
-	i2c-gpio {
-		compatible = "i2c-gpio";
-		gpios = <&GPIOB 9 0 &GPIOB 10 0>;
-		i2c-gpio,delay-us = <10>;
-	};
-
-};
-
-&nandc {
-	status = "okay";
-
-	nand@0 {
-		reg = <0>;
-		#address-cells = <1>;
-		#size-cells = <1>;
-		nand-ecc-mode = "soft";
-		nand-ecc-algo = "hamming";
-
-		partition@0 {
-			label = "boot";
-			reg = <0x00000000 0x00e00000>;
-			read-only;
-		};
-
-		partition@e00000 {
-			label = "ubi";
-			reg = <0x00e00000 0x07200000>;
-		};
-	};
-};
diff --git a/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi b/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi
deleted file mode 100644
index c096a7d1c3..0000000000
--- a/target/linux/oxnas/files/arch/arm/boot/dts/ox820.dtsi
+++ /dev/null
@@ -1,342 +0,0 @@
-/*
- * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#include "skeleton.dtsi"
-
-/ {
-	compatible = "plxtech,nas7820", "plxtech,nas782x";
-	interrupt-parent = <&gic>;
-
-	aliases {
-		serial0 = &uart0;
-		/* alias to determine bank index */
-		gpio0 = &GPIOA;
-		gpio1 = &GPIOB;
-
-		ethernet0 = &gmac;
-	};
-
-	cpus {
-		cpu@0 {
-			compatible = "arm,arm11mpcore";
-		};
-		cpu@1 {
-			compatible = "arm,arm11mpcore";
-		};
-	};
-
-	gic: gic@47001000 {
-		compatible = "arm,arm11mp-gic";
-		interrupt-controller;
-		#interrupt-cells = <3>;
-		reg = <0x47001000 0x1000>,
-		      <0x47000100 0x0100>;
-	};
-
-	rst: reset-controller@44E00034 {
-		compatible = "plxtech,nas782x-reset";
-		#reset-cells = <1>;
-		reg = <0x44E00034 0x8>; /* currently not used */
-	};
-
-	rps: rps@44400000 {
-		compatible = "plxtech,nas782x-rps";
-		interrupt-controller;
-		#interrupt-cells = <1>;
-		reg = <0x44400000 0x14>;
-		interrupts = <0 5 0x304>;
-	};
-
-	/* external oscillator */
-	osc: oscillator {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency  = <25000000>;
-	};
-
-	sysclk: sysclk {
-		compatible = "fixed-factor-clock";
-		#clock-cells = <0>;
-		clock-div = <4>;
-		clock-mult = <1>;
-		clocks = <&osc>;
-	};
-
-	plla: plla@44e001f0 {
-		compatible = "plxtech,nas782x-plla";
-		#clock-cells = <0>;
-		clocks = <&osc>;
-		reg = <0x44e001f0 0x10>;
-	};
-
-	pllb: pllb@44f001f0 {
-		compatible = "plxtech,nas782x-pllb";
-		#clock-cells = <0>;
-		clocks = <&osc>;
-		reg = <0x44f001f0 0x10>;
-		resets = <&rst 31>;
-	};
-
-	stdclk: stdclk {
-		compatible = "plxtech,nas782x-stdclk";
-		#clock-cells = <1>;
-		clocks = <&osc>;
-	};
-
-	twdclk: twdclk {
-		compatible = "fixed-factor-clock";
-		#clock-cells = <0>;
-		clock-div = <2>;
-		clock-mult = <1>;
-		clocks = <&plla>;
-	};
-
-	gmacclk: gmacclk {
-		compatible = "fixed-clock";
-		#clock-cells = <0>;
-		clock-frequency  = <125000000>;
-	};
-
-	pinctrl {
-		/* act as a simple bus, so children will be probed automatically */
-		#address-cells = <1>;
-		#size-cells = <1>;
-		compatible = "plxtech,nas782x-pinctrl", "simple-bus";
-		ranges;
-
-		plxtech,mux-mask = <
-			 0xFFFFFFFF 0xCC0FFDF9 0xFC000E60 0x0F03F7E0 0xF00C0FE0
-			 0x0003FFFF 0x00037FFF 0x0003FFF8 0x00000F00 0x0003F7F3
-			>;
-
-		GPIOA: gpio@44000000 {
-			compatible = "plxtech,nas782x-gpio";
-			reg = <0x44000000 0x100>, <0x44E00000 0x200>;
-			interrupts = <0 21 0x304>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#gpio-lines = <32>; /* real gpio pin count */
-		};
-
-		GPIOB: gpio@44100000 {
-			compatible = "plxtech,nas782x-gpio";
-			reg = <0x44100000 0x100>, <0x44F00000 0x200>;
-			interrupts = <0 22 0x304>;
-			#gpio-cells = <2>;
-			gpio-controller;
-			interrupt-controller;
-			#interrupt-cells = <2>;
-			#gpio-lines = <18>; /* real gpio pin count */
-		};
-
-		uart0 {
-			pinctrl_uart0: uart0-0 {
-				plxtech,pins =
-					<0 30 5 0	/* MF_A30 PINMUX_ALT PINMUX_UARTA_SIN */
-					 0 31 5 0>;	/* MF_A31 PINMUX_ALT PINMUX_UARTA_SOUT */
-			};
-		};
-
-		gmac0 {
-			pinctrl_gmac0: gmac0-0 {
-				plxtech,pins =
-					<0 3 1 0	/* MF_A3 PINMUX_2 PINMUX_MACA_MDC */
-					 0 4 1 0>;	/* MF_A4 PINMUX_2 PINMUX_MACA_MDIO */
-			};
-		};
-
-		nand0 {
-			pinctrl_nand0: nand0-0 {
-				plxtech,pins =
-					<0 12 1 0	/* MF_A12 PINMUX_2 PINMUX_STATIC_DATA0 */
-					 0 13 1 0	/* MF_A13 PINMUX_2 PINMUX_STATIC_DATA1 */
-					 0 14 1 0	/* MF_A14 PINMUX_2 PINMUX_STATIC_DATA2 */
-					 0 15 1 0	/* MF_A15 PINMUX_2 PINMUX_STATIC_DATA3 */
-					 0 16 1 0	/* MF_A16 PINMUX_2 PINMUX_STATIC_DATA4 */
-					 0 17 1 0	/* MF_A17 PINMUX_2 PINMUX_STATIC_DATA5 */
-					 0 18 1 0	/* MF_A18 PINMUX_2 PINMUX_STATIC_DATA6 */
-					 0 19 1 0	/* MF_A19 PINMUX_2 PINMUX_STATIC_DATA7 */
-
-					 0 20 1 0	/* MF_A20 PINMUX_2 PINMUX_STATIC_NWE */
-					 0 21 1 0	/* MF_A21 PINMUX_2 PINMUX_STATIC_NOE */
-					 0 22 1 0	/* MF_A22 PINMUX_2 PINMUX_STATIC_NCS */
-					 0 23 1 0	/* MF_A23 PINMUX_2 PINMUX_STATIC_ADDR18 */
-					 0 24 1 0>;	/* MF_A24 PINMUX_2 PINMUX_STATIC_ADDR19 */
-			};
-		};
-	};
-
-	pcie-controller@47C00000 {
-		compatible = "plxtech,nas782x-pcie";
-		device_type = "pci";
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		/*		flag & space	bus address	host address	size */
-		ranges = <	0x82000000	0 0x48000000	0x48000000	0 0x2000000
-				0xC2000000	0 0x4A000000	0x4A000000	0 0x1E00000
-				0x81000000	0 0x4BE00000	0x4BE00000	0 0x0100000
-				0x80000000	0 0x4BF00000	0x4BF00000	0 0x0100000>;
-
-		bus-range = <0x00 0x7f>;
-
-		/*	cfg			inbound translator	phy*/
-		reg =	<0x47C00000 0x1000>,	<0x47D00000 0x100>,	 <0x44A00000 0x10>;
-
-		#interrupt-cells = <1>;
-		/* wild card mask, match all bus address & interrupt specifier */
-		/* format: bus address mask, interrupt specifier mask */
-		/* each bit 1 means need match, 0 means ignored when match */
-		interrupt-map-mask = <0 0 0 0>;
-		/* format: a list of: bus address, interrupt specifier,
-		 * parent interrupt controller & specifier */
-		interrupt-map = <0 0 0 0 &gic 0 19 0x304>;
-
-		gpios = <&GPIOB 12 0>;
-		clocks = <&stdclk 8>, <&pllb>;
-		clock-names = "pcie", "busclk";
-		resets = <&rst 7>, <&rst 14>;
-		reset-names = "pcie", "phy";
-
-		plxtech,pcie-hcsl-bit = <2>;
-		plxtech,pcie-ctrl-offset = <0x120>;
-		plxtech,pcie-outbound-offset = <0x138>;
-		status = "disabled";
-	};
-
-	pcie-controller@47E00000 {
-		compatible = "plxtech,nas782x-pcie";
-		device_type = "pci";
-		#address-cells = <3>;
-		#size-cells = <2>;
-
-		/*		flag & space	bus address	host address	size */
-		ranges = <	0x82000000	0 0x4C000000	0x4C000000	0 0x2000000
-				0xC2000000	0 0x4E000000	0x4E000000	0 0x1E00000
-				0x81000000	0 0x4FE00000	0x4FE00000	0 0x0100000
-				0x80000000	0 0x4FF00000	0x4FF00000	0 0x0100000>;
-
-		bus-range = <0x80 0xff>;
-
-		/*	cfg			inbound translator	phy*/
-		reg =	<0x47E00000 0x1000>,	<0x47F00000 0x100>,	<0x44A00000 0x10>;
-
-		#interrupt-cells = <1>;
-		/* wild card mask, match all bus address & interrupt specifier */
-		/* format: bus address mask, interrupt specifier mask */
-		/* each bit 1 means need match, 0 means ignored when match */
-		interrupt-map-mask = <0 0 0 0>;
-		/* format: a list of: bus address, interrupt specifier,
-		 * parent interrupt controller & specifier */
-		interrupt-map = <0 0 0 0 &gic 0 20 0x304>;
-
-		/* gpios = <&GPIOB 12 0>; */
-		clocks = <&stdclk 11>, <&pllb>;
-		clock-names = "pcie", "busclk";
-		resets = <&rst 23>, <&rst 14>;
-		reset-names = "pcie", "phy";
-
-		plxtech,pcie-hcsl-bit = <3>;
-		plxtech,pcie-ctrl-offset = <0x124>;
-		plxtech,pcie-outbound-offset = <0x174>;
-		status = "disabled";
-	};
-
-	local-timer@47000600 {
-		compatible = "arm,arm11mp-twd-timer";
-		reg = <0x47000600 0x20>;
-		interrupts = <1 13 0x304>;	/* percpu, irq 29, cpu mask 3, level high */
-		clocks = <&twdclk>;
-	};
-
-	watchdog@47000620 {
-		compatible = "mpcore_wdt";
-		reg = <0x47000620 0x20>;
-		interrupts = <1 14 0x304>;	/* percpu, irq 30, cpu mask 3, level high */
-		clocks = <&twdclk>;
-	};
-
-	timer@44400200 {
-		compatible = "plxtech,nas782x-rps-timer";
-		reg = <0x44400200 0x40>;
-		clocks = <&sysclk>;
-	};
-
-	uart0: uart@44200000 {
-		compatible = "ns16550a";
-		reg = <0x44200000 0x100>;
-		clock-frequency = <6250000>;
-		interrupts = <0 23 0x304>;
-		reg-shift = <0>;
-		fifo-size = <16>;
-		reg-io-width = <1>;
-		current-speed = <115200>;
-		no-loopback-test;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_uart0>;
-		status = "disabled";
-	};
-
-	sata@45900000 {
-		compatible = "plxtech,nas782x-sata";
-			/*	ports		dmactl		sgdma	*/
-		reg = <0x45900000 0x20000>, <0x459A0000 0x40>, <0x459B0000 0x20>,
-			/*	core		phy		descriptors (optional)	*/
-			<0x459E0000 0x2000>, <0x44900000 0x0C>, <0x50000000 0x1000>;
-		interrupts = <0 18 0x304>;
-		clocks = <&stdclk 4>;
-		resets = <&rst 11>, <&rst 12>, <&rst 13>;
-		reset-names = "sata", "link", "phy";
-		nr-ports = <1>;
-		status = "disabled";
-	};
-
-	nandc: nand-controller@41000000 {
-		compatible = "oxsemi,ox820-nand";
-		reg = <0x41000000 0x100000>;
-		clocks = <&stdclk 9>;
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_nand0>;
-		resets = <&rst 15>;
-		#address-cells = <1>;
-		#size-cells = <0>;
-		status = "disabled";
-	};
-
-	gmac: ethernet@40400000 {
-		compatible = "plxtech,nas782x-gmac", "snps,dwmac";
-		reg = <0x40400000 0x2000>;
-		interrupts = <0 8 0x304>, <0 17 0x304>;
-		interrupt-names = "macirq", "eth_wake_irq";
-		mac-address = [000000000000]; /* Filled in by U-Boot */
-		phy-mode = "rgmii";
-		clocks = <&stdclk 7>, <&gmacclk>;
-		clock-names = "gmac", "stmmaceth";
-		pinctrl-names = "default";
-		pinctrl-0 = <&pinctrl_gmac0>;
-		resets = <&rst 6>;
-		status = "disabled";
-	};
-
-	ehci@40200100 {
-		compatible = "plxtech,nas782x-ehci";
-		reg = <0x40200100 0xf00>;
-		interrupts = <0 7 0x304>;
-		clocks = <&stdclk 6>, <&pllb>, <&stdclk 12>;
-		clock-names = "usb", "refsrc", "phyref";
-		resets = <&rst 4>, <&rst 5>, <&rst 26>;
-		reset-names = "host", "phya", "phyb";
-		/* Otherwise ref300 is used, which is derived from sata phy
-		 * in that case, usb depends on sata initialization */
-		/* FIXME: how to make this dependency explicit ? */
-		plxtech,ehci_use_pllb;
-		status = "disabled";
-	};
-};
diff --git a/target/linux/oxnas/files/arch/arm/configs/ox820_defconfig b/target/linux/oxnas/files/arch/arm/configs/ox820_defconfig
deleted file mode 100644
index bb0a9d68a8..0000000000
--- a/target/linux/oxnas/files/arch/arm/configs/ox820_defconfig
+++ /dev/null
@@ -1,104 +0,0 @@
-CONFIG_CROSS_COMPILE="arm-linux-gnueabi-"
-CONFIG_SYSVIPC=y
-CONFIG_POSIX_MQUEUE=y
-CONFIG_NO_HZ_IDLE=y
-CONFIG_HIGH_RES_TIMERS=y
-CONFIG_IRQ_TIME_ACCOUNTING=y
-CONFIG_CGROUPS=y
-CONFIG_NAMESPACES=y
-CONFIG_EMBEDDED=y
-# CONFIG_COMPAT_BRK is not set
-CONFIG_JUMP_LABEL=y
-CONFIG_MODULES=y
-CONFIG_MODULE_UNLOAD=y
-CONFIG_ARCH_OXNAS=y
-# CONFIG_DMA_CACHE_RWFO is not set
-CONFIG_DMA_CACHE_FIQ_BROADCAST=y
-CONFIG_PCI=y
-CONFIG_PCI_OXNAS=y
-CONFIG_SMP=y
-# CONFIG_SMP_ON_UP is not set
-CONFIG_NR_CPUS=2
-CONFIG_HOTPLUG_CPU=y
-CONFIG_AEABI=y
-# CONFIG_OABI_COMPAT is not set
-CONFIG_UACCESS_WITH_MEMCPY=y
-CONFIG_USE_OF=y
-CONFIG_BINFMT_MISC=y
-# CONFIG_SUSPEND is not set
-CONFIG_NET=y
-CONFIG_PACKET=y
-CONFIG_UNIX=y
-CONFIG_INET=y
-CONFIG_IP_PNP=y
-CONFIG_IP_PNP_DHCP=y
-CONFIG_IPV6=y
-CONFIG_CFG80211=y
-CONFIG_MAC80211=y
-CONFIG_MAC80211_RC_PID=y
-CONFIG_DEVTMPFS=y
-CONFIG_DEVTMPFS_MOUNT=y
-CONFIG_MTD=y
-CONFIG_MTD_CMDLINE_PARTS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_NAND=y
-CONFIG_MTD_NAND_OXNAS=y
-CONFIG_MTD_UBI=y
-CONFIG_BLK_DEV_SD=y
-CONFIG_SCSI_MULTI_LUN=y
-CONFIG_ATA=y
-CONFIG_SATA_OXNAS=y
-CONFIG_NETDEVICES=y
-CONFIG_STMMAC_ETH=y
-CONFIG_STMMAC_DEBUG_FS=y
-CONFIG_STMMAC_DA=y
-CONFIG_ATH_CARDS=y
-CONFIG_ATH9K=y
-CONFIG_ATH9K_LEGACY_RATE_CONTROL=y
-# CONFIG_RTL_CARDS is not set
-# CONFIG_INPUT_MOUSEDEV_PSAUX is not set
-# CONFIG_INPUT_KEYBOARD is not set
-# CONFIG_INPUT_MOUSE is not set
-# CONFIG_SERIO is not set
-# CONFIG_LEGACY_PTYS is not set
-CONFIG_SERIAL_8250=y
-# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set
-CONFIG_SERIAL_8250_CONSOLE=y
-CONFIG_SERIAL_8250_NR_UARTS=1
-CONFIG_SERIAL_8250_RUNTIME_UARTS=1
-CONFIG_SERIAL_OF_PLATFORM=y
-CONFIG_GPIO_SYSFS=y
-CONFIG_USB=y
-CONFIG_USB_ANNOUNCE_NEW_DEVICES=y
-CONFIG_USB_EHCI_HCD=y
-CONFIG_USB_EHCI_OXNAS=y
-CONFIG_USB_STORAGE=y
-CONFIG_LEDS_GPIO=y
-CONFIG_LEDS_TRIGGER_TIMER=y
-CONFIG_LEDS_TRIGGER_ONESHOT=y
-CONFIG_LEDS_TRIGGER_HEARTBEAT=y
-CONFIG_LEDS_TRIGGER_DEFAULT_ON=y
-CONFIG_COMMON_CLK_DEBUG=y
-CONFIG_EXT2_FS=y
-CONFIG_EXT4_FS=y
-CONFIG_FUSE_FS=y
-CONFIG_VFAT_FS=y
-CONFIG_NTFS_FS=m
-CONFIG_NTFS_RW=y
-CONFIG_TMPFS=y
-CONFIG_TMPFS_POSIX_ACL=y
-CONFIG_UBIFS_FS=y
-CONFIG_NFS_FS=y
-CONFIG_ROOT_NFS=y
-CONFIG_PRINTK_TIME=y
-# CONFIG_ENABLE_WARN_DEPRECATED is not set
-# CONFIG_ENABLE_MUST_CHECK is not set
-# CONFIG_FTRACE is not set
-CONFIG_DEBUG_USER=y
-CONFIG_DEBUG_LL=y
-CONFIG_DEBUG_LL_UART_8250=y
-CONFIG_DEBUG_UART_PHYS=0x44200000
-CONFIG_DEBUG_UART_VIRT=0xF0000000
-CONFIG_DEBUG_UART_8250_SHIFT=0
-CONFIG_EARLY_PRINTK=y
-CONFIG_CRYPTO_ANSI_CPRNG=y
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/Kconfig b/target/linux/oxnas/files/arch/arm/mach-oxnas/Kconfig
deleted file mode 100644
index 6bdf3f6efd..0000000000
--- a/target/linux/oxnas/files/arch/arm/mach-oxnas/Kconfig
+++ /dev/null
@@ -1,25 +0,0 @@
-choice
-	prompt "Oxnas platform type"
-	default MACH_OXNAS
-	depends on ARCH_OXNAS
-
-config MACH_OX820
-	bool "Generic NAS7820 Support"
-	select ARM_GIC
-	select GENERIC_CLOCKEVENTS
-	select CPU_V6K
-	select HAVE_ARM_SCU if SMP
-	select HAVE_ARM_TWD if SMP
-	select HAVE_SMP
-	select PLXTECH_RPS
-	select CLKSRC_OF
-	select CLKSRC_RPS_TIMER
-	select USB_ARCH_HAS_EHCI
-	select PINCTRL_OXNAS
-	select PINCTRL
-	select RESET_CONTROLLER_OXNAS
-	select ARCH_WANT_LIBATA_LEDS
-	help
-	  Include support for the ox820 platform.
-
-endchoice
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile b/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile
deleted file mode 100644
index 6862c34981..0000000000
--- a/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile
+++ /dev/null
@@ -1,8 +0,0 @@
-#
-# Makefile for the linux kernel.
-#
-
-obj-$(CONFIG_MACH_OX820)		+= mach-ox820.o
-obj-$(CONFIG_SMP)			+= platsmp.o headsmp.o
-obj-$(CONFIG_DMA_CACHE_FIQ_BROADCAST)	+= fiq.o
-obj-$(CONFIG_HOTPLUG_CPU)		+= hotplug.o
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile.boot b/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile.boot
deleted file mode 100644
index b52e473d64..0000000000
--- a/target/linux/oxnas/files/arch/arm/mach-oxnas/Makefile.boot
+++ /dev/null
@@ -1,2 +0,0 @@
-   zreladdr-y	+= 0x60008000
-params_phys-y	:= 0x60000100
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/fiq.S b/target/linux/oxnas/files/arch/arm/mach-oxnas/fiq.S
deleted file mode 100644
index 6acd5a7394..0000000000
--- a/target/linux/oxnas/files/arch/arm/mach-oxnas/fiq.S
+++ /dev/null
@@ -1,87 +0,0 @@
-/*
- *  Copyright (C) 2012 Gateworks Corporation
- *      Chris Lang <clang@gateworks.com>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <asm/assembler.h>
-#include <asm/asm-offsets.h>
-
-#define D_CACHE_LINE_SIZE 32
-
-	.text
-
-/*
- * R8  - DMA Start Address
- * R9  - DMA Length
- * R10 - DMA Direction
- * R11 - DMA type
- * R12 - fiq_buffer Address
-*/
-
-	.global	ox820_fiq_end
-ENTRY(ox820_fiq_start)
-	str	r8, [r13]
-
-	ldmia	r12, {r8, r9, r10}
-	and	r11, r10, #0x3000000
-	and	r10, r10, #0xff
-
-	teq	r11, #0x1000000
-	beq	ox820_dma_map_area
-	teq	r11, #0x2000000
-	beq	ox820_dma_unmap_area
-	/* fall through */
-ox820_dma_flush_range:
-	bic	r8, r8, #D_CACHE_LINE_SIZE - 1
-1:
-	mcr	p15, 0, r8, c7, c14, 1		@ clean & invalidate D line
-	add	r8, r8, #D_CACHE_LINE_SIZE
-	cmp	r8, r9
-	blo	1b
-	/* fall through */
-ox820_fiq_exit:
-	mov	r8, #0
-	str	r8, [r12, #8]
-	mcr	p15, 0, r8, c7, c10, 4		@ drain write buffer
-	subs	pc, lr, #4
-
-ox820_dma_map_area:
-	add	r9, r9, r8
-	teq	r10, #DMA_FROM_DEVICE
-	beq	ox820_dma_inv_range
-	teq	r10, #DMA_TO_DEVICE
-	bne	ox820_dma_flush_range
-	/* fall through */
-ox820_dma_clean_range:
-	bic	r8, r8, #D_CACHE_LINE_SIZE - 1
-1:
-	mcr	p15, 0, r8, c7, c10, 1		@ clean D line
-	add	r8, r8, #D_CACHE_LINE_SIZE
-	cmp	r8, r9
-	blo	1b
-	b	ox820_fiq_exit
-
-ox820_dma_unmap_area:
-	add	r9, r9, r8
-	teq	r10, #DMA_TO_DEVICE
-	beq	ox820_fiq_exit
-	/* fall through */
-ox820_dma_inv_range:
-	tst	r8, #D_CACHE_LINE_SIZE - 1
-	bic	r8, r8, #D_CACHE_LINE_SIZE - 1
-	mcrne	p15, 0, r8, c7, c10, 1		@ clean D line
-	tst	r9, #D_CACHE_LINE_SIZE - 1
-	bic	r9, r9, #D_CACHE_LINE_SIZE - 1
-	mcrne	p15, 0, r9, c7, c14, 1		@ clean & invalidate D line
-1:
-	mcr	p15, 0, r8, c7, c6, 1		@ invalidate D line
-	add	r8, r8, #D_CACHE_LINE_SIZE
-	cmp	r8, r9
-	blo	1b
-	b	ox820_fiq_exit
-
-ox820_fiq_end:
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/headsmp.S b/target/linux/oxnas/files/arch/arm/mach-oxnas/headsmp.S
deleted file mode 100644
index a63edae62b..0000000000
--- a/target/linux/oxnas/files/arch/arm/mach-oxnas/headsmp.S
+++ /dev/null
@@ -1,27 +0,0 @@
-/*
- *  linux/arch/arm/mach-ox820/headsmp.S
- *
- *  Copyright (c) 2003 ARM Limited
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/linkage.h>
-#include <linux/init.h>
-
-	__INIT
-
-/*
- * OX820 specific entry point for secondary CPUs.
- */
-ENTRY(ox820_secondary_startup)
-	mov r4, #0
-	/* invalidate both caches and branch target cache */
-	mcr p15, 0, r4, c7, c7, 0
-	/*
-	 * we've been released from the holding pen: secondary_stack
-	 * should now contain the SVC stack for this core
-	 */
-	b	secondary_startup
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/hotplug.c b/target/linux/oxnas/files/arch/arm/mach-oxnas/hotplug.c
deleted file mode 100644
index e3c9cb5db7..0000000000
--- a/target/linux/oxnas/files/arch/arm/mach-oxnas/hotplug.c
+++ /dev/null
@@ -1,111 +0,0 @@
-/*
- *  linux/arch/arm/mach-realview/hotplug.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/kernel.h>
-#include <linux/errno.h>
-#include <linux/smp.h>
-
-#include <asm/cp15.h>
-#include <asm/smp_plat.h>
-
-static inline void cpu_enter_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(
-	"	mcr	p15, 0, %1, c7, c5, 0\n"
-	"	mcr	p15, 0, %1, c7, c10, 4\n"
-	/*
-	 * Turn off coherency
-	 */
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	bic	%0, %0, #0x20\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	"	mrc	p15, 0, %0, c1, c0, 0\n"
-	"	bic	%0, %0, %2\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	  : "=&r" (v)
-	  : "r" (0), "Ir" (CR_C)
-	  : "cc");
-}
-
-static inline void cpu_leave_lowpower(void)
-{
-	unsigned int v;
-
-	asm volatile(	"mrc	p15, 0, %0, c1, c0, 0\n"
-	"	orr	%0, %0, %1\n"
-	"	mcr	p15, 0, %0, c1, c0, 0\n"
-	"	mrc	p15, 0, %0, c1, c0, 1\n"
-	"	orr	%0, %0, #0x20\n"
-	"	mcr	p15, 0, %0, c1, c0, 1\n"
-	  : "=&r" (v)
-	  : "Ir" (CR_C)
-	  : "cc");
-}
-
-static inline void platform_do_lowpower(unsigned int cpu, int *spurious)
-{
-	/*
-	 * there is no power-control hardware on this platform, so all
-	 * we can do is put the core into WFI; this is safe as the calling
-	 * code will have already disabled interrupts
-	 */
-	for (;;) {
-		/*
-		 * here's the WFI
-		 */
-		asm(".word	0xe320f003\n"
-		    :
-		    :
-		    : "memory", "cc");
-
-		if (pen_release == cpu_logical_map(cpu)) {
-			/*
-			 * OK, proper wakeup, we're done
-			 */
-			break;
-		}
-
-		/*
-		 * Getting here, means that we have come out of WFI without
-		 * having been woken up - this shouldn't happen
-		 *
-		 * Just note it happening - when we're woken, we can report
-		 * its occurrence.
-		 */
-		(*spurious)++;
-	}
-}
-
-/*
- * platform-specific code to shutdown a CPU
- *
- * Called with IRQs disabled
- */
-void ox820_cpu_die(unsigned int cpu)
-{
-	int spurious = 0;
-
-	/*
-	 * we're ready for shutdown now, so do it
-	 */
-	cpu_enter_lowpower();
-	platform_do_lowpower(cpu, &spurious);
-
-	/*
-	 * bring this CPU back into the world of cache
-	 * coherency, and then restore interrupts
-	 */
-	cpu_leave_lowpower();
-
-	if (spurious)
-		pr_warn("CPU%u: %u spurious wakeup calls\n", cpu, spurious);
-}
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/hardware.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/hardware.h
deleted file mode 100644
index caae772c31..0000000000
--- a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/hardware.h
+++ /dev/null
@@ -1,233 +0,0 @@
-/*
- * arch/arm/mach-0x820/include/mach/hardware.h
- *
- * Copyright (C) 2009 Oxford Semiconductor Ltd
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-
-#ifndef __ASM_ARCH_HARDWARE_H
-#define __ASM_ARCH_HARDWARE_H
-
-#include <linux/io.h>
-#include <mach/iomap.h>
-
-/*
- * Location of flags and vectors in SRAM for controlling the booting of the
- * secondary ARM11 processors.
- */
-
-#define OXNAS_SCU_BASE_VA		OXNAS_PERCPU_BASE_VA
-#define OXNAS_GICN_BASE_VA(n)		(OXNAS_PERCPU_BASE_VA + 0x200 + n*0x100)
-
-#define HOLDINGPEN_CPU			IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8)
-#define HOLDINGPEN_LOCATION		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4)
-
-/**
- * System block reset and clock control
- */
-#define SYS_CTRL_PCI_STAT		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x20)
-#define SYSCTRL_CLK_STAT		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x24)
-#define SYS_CTRL_CLK_SET_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x2C)
-#define SYS_CTRL_CLK_CLR_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x30)
-#define SYS_CTRL_RST_SET_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x34)
-#define SYS_CTRL_RST_CLR_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x38)
-
-#define SYS_CTRL_PLLSYS_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x48)
-#define SYS_CTRL_CLK_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x64)
-#define SYS_CTRL_PLLSYS_KEY_CTRL	IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x6C)
-#define SYS_CTRL_GMAC_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x78)
-#define SYS_CTRL_GMAC_DELAY_CTRL	IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x100)
-
-/* Scratch registers */
-#define SYS_CTRL_SCRATCHWORD0		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4)
-#define SYS_CTRL_SCRATCHWORD1		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8)
-#define SYS_CTRL_SCRATCHWORD2		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xcc)
-#define SYS_CTRL_SCRATCHWORD3		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xd0)
-
-#define SYS_CTRL_PLLA_CTRL0		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F0)
-#define SYS_CTRL_PLLA_CTRL1		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F4)
-#define SYS_CTRL_PLLA_CTRL2		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F8)
-#define SYS_CTRL_PLLA_CTRL3		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1FC)
-
-#define SYS_CTRL_USBHSMPH_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x40)
-#define SYS_CTRL_USBHSMPH_STAT		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x44)
-#define SYS_CTRL_REF300_DIV		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xF8)
-#define SYS_CTRL_USBHSPHY_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x84)
-#define SYS_CTRL_USB_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x90)
-
-/* pcie */
-#define SYS_CTRL_HCSL_CTRL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x114)
-
-/* System control multi-function pin function selection */
-#define SYS_CTRL_SECONDARY_SEL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x14)
-#define SYS_CTRL_TERTIARY_SEL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x8c)
-#define SYS_CTRL_QUATERNARY_SEL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x94)
-#define SYS_CTRL_DEBUG_SEL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x9c)
-#define SYS_CTRL_ALTERNATIVE_SEL	IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xa4)
-#define SYS_CTRL_PULLUP_SEL		IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xac)
-
-/* Secure control multi-function pin function selection */
-#define SEC_CTRL_SECONDARY_SEL		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x14)
-#define SEC_CTRL_TERTIARY_SEL		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x8c)
-#define SEC_CTRL_QUATERNARY_SEL		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x94)
-#define SEC_CTRL_DEBUG_SEL		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x9c)
-#define SEC_CTRL_ALTERNATIVE_SEL	IOMEM(OXNAS_SECCRTL_BASE_VA + 0xa4)
-#define SEC_CTRL_PULLUP_SEL		IOMEM(OXNAS_SECCRTL_BASE_VA + 0xac)
-
-#define SEC_CTRL_COPRO_CTRL		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x68)
-#define SEC_CTRL_SECURE_CTRL		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x98)
-#define SEC_CTRL_LEON_DEBUG		IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF0)
-#define SEC_CTRL_PLLB_DIV_CTRL		IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF8)
-#define SEC_CTRL_PLLB_CTRL0		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F0)
-#define SEC_CTRL_PLLB_CTRL1		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4)
-#define SEC_CTRL_PLLB_CTRL8		IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4)
-
-#define RPSA_IRQ_SOFT			IOMEM(OXNAS_RPSA_BASE_VA + 0x10)
-#define RPSA_FIQ_ENABLE			IOMEM(OXNAS_RPSA_BASE_VA + 0x108)
-#define RPSA_FIQ_DISABLE		IOMEM(OXNAS_RPSA_BASE_VA + 0x10C)
-#define RPSA_FIQ_IRQ_TO_FIQ		IOMEM(OXNAS_RPSA_BASE_VA + 0x1FC)
-
-#define RPSC_IRQ_SOFT			IOMEM(OXNAS_RPSC_BASE_VA + 0x10)
-#define RPSC_FIQ_ENABLE			IOMEM(OXNAS_RPSC_BASE_VA + 0x108)
-#define RPSC_FIQ_DISABLE		IOMEM(OXNAS_RPSC_BASE_VA + 0x10C)
-#define RPSC_FIQ_IRQ_TO_FIQ		IOMEM(OXNAS_RPSC_BASE_VA + 0x1FC)
-
-#define RPSA_TIMER2_VAL			IOMEM(OXNAS_RPSA_BASE_VA + 0x224)
-
-#define REF300_DIV_INT_SHIFT		8
-#define REF300_DIV_FRAC_SHIFT		0
-#define REF300_DIV_INT(val)		((val) << REF300_DIV_INT_SHIFT)
-#define REF300_DIV_FRAC(val)		((val) << REF300_DIV_FRAC_SHIFT)
-
-#define USBHSPHY_SUSPENDM_MANUAL_ENABLE		16
-#define USBHSPHY_SUSPENDM_MANUAL_STATE		15
-#define USBHSPHY_ATE_ESET			14
-#define USBHSPHY_TEST_DIN			6
-#define USBHSPHY_TEST_ADD			2
-#define USBHSPHY_TEST_DOUT_SEL			1
-#define USBHSPHY_TEST_CLK			0
-
-#define USB_CTRL_USBAPHY_CKSEL_SHIFT	5
-#define USB_CLK_XTAL0_XTAL1		(0 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
-#define USB_CLK_XTAL0			(1 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
-#define USB_CLK_INTERNAL		(2 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
-
-#define USBAMUX_DEVICE			BIT(4)
-
-#define USBPHY_REFCLKDIV_SHIFT		2
-#define USB_PHY_REF_12MHZ		(0 << USBPHY_REFCLKDIV_SHIFT)
-#define USB_PHY_REF_24MHZ		(1 << USBPHY_REFCLKDIV_SHIFT)
-#define USB_PHY_REF_48MHZ		(2 << USBPHY_REFCLKDIV_SHIFT)
-
-#define USB_CTRL_USB_CKO_SEL_BIT	0
-
-#define USB_INT_CLK_XTAL		0
-#define USB_INT_CLK_REF300		2
-#define USB_INT_CLK_PLLB		3
-
-#define SYS_CTRL_GMAC_CKEN_RX_IN	14
-#define SYS_CTRL_GMAC_CKEN_RXN_OUT	13
-#define SYS_CTRL_GMAC_CKEN_RX_OUT	12
-#define SYS_CTRL_GMAC_CKEN_TX_IN	10
-#define SYS_CTRL_GMAC_CKEN_TXN_OUT	9
-#define SYS_CTRL_GMAC_CKEN_TX_OUT	8
-#define SYS_CTRL_GMAC_RX_SOURCE		7
-#define SYS_CTRL_GMAC_TX_SOURCE		6
-#define SYS_CTRL_GMAC_LOW_TX_SOURCE	4
-#define SYS_CTRL_GMAC_AUTO_TX_SOURCE	3
-#define SYS_CTRL_GMAC_RGMII		2
-#define SYS_CTRL_GMAC_SIMPLE_MUX	1
-#define SYS_CTRL_GMAC_CKEN_GTX		0
-#define SYS_CTRL_GMAC_TX_VARDELAY_SHIFT		0
-#define SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT	8
-#define SYS_CTRL_GMAC_RX_VARDELAY_SHIFT		16
-#define SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT	24
-#define SYS_CTRL_GMAC_TX_VARDELAY(d)	((d)<<SYS_CTRL_GMAC_TX_VARDELAY_SHIFT)
-#define SYS_CTRL_GMAC_TXN_VARDELAY(d)	((d)<<SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT)
-#define SYS_CTRL_GMAC_RX_VARDELAY(d)	((d)<<SYS_CTRL_GMAC_RX_VARDELAY_SHIFT)
-#define SYS_CTRL_GMAC_RXN_VARDELAY(d)	((d)<<SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT)
-
-#define PLLB_BYPASS			1
-#define PLLB_ENSAT			3
-#define PLLB_OUTDIV			4
-#define PLLB_REFDIV			8
-#define PLLB_DIV_INT_SHIFT		8
-#define PLLB_DIV_FRAC_SHIFT		0
-#define PLLB_DIV_INT(val)		((val) << PLLB_DIV_INT_SHIFT)
-#define PLLB_DIV_FRAC(val)		((val) << PLLB_DIV_FRAC_SHIFT)
-
-#define SYS_CTRL_CKCTRL_PCI_DIV_BIT	0
-#define SYS_CTRL_CKCTRL_SLOW_BIT	8
-
-#define SYS_CTRL_UART2_DEQ_EN		0
-#define SYS_CTRL_UART3_DEQ_EN		1
-#define SYS_CTRL_UART3_IQ_EN		2
-#define SYS_CTRL_UART4_IQ_EN		3
-#define SYS_CTRL_UART4_NOT_PCI_MODE	4
-
-#define SYS_CTRL_PCI_CTRL1_PCI_STATIC_RQ_BIT	11
-
-#define PLLA_REFDIV_MASK		0x3F
-#define PLLA_REFDIV_SHIFT		8
-#define PLLA_OUTDIV_MASK		0x7
-#define PLLA_OUTDIV_SHIFT		4
-
-/* bit numbers of clock control register */
-#define SYS_CTRL_CLK_COPRO		0
-#define SYS_CTRL_CLK_DMA		1
-#define SYS_CTRL_CLK_CIPHER		2
-#define SYS_CTRL_CLK_SD			3
-#define SYS_CTRL_CLK_SATA		4
-#define SYS_CTRL_CLK_I2S		5
-#define SYS_CTRL_CLK_USBHS		6
-#define SYS_CTRL_CLK_MACA		7
-#define SYS_CTRL_CLK_MAC		SYS_CTRL_CLK_MACA
-#define SYS_CTRL_CLK_PCIEA		8
-#define SYS_CTRL_CLK_STATIC		9
-#define SYS_CTRL_CLK_MACB		10
-#define SYS_CTRL_CLK_PCIEB		11
-#define SYS_CTRL_CLK_REF600		12
-#define SYS_CTRL_CLK_USBDEV		13
-#define SYS_CTRL_CLK_DDR		14
-#define SYS_CTRL_CLK_DDRPHY		15
-#define SYS_CTRL_CLK_DDRCK		16
-
-
-/* bit numbers of reset control register */
-#define SYS_CTRL_RST_SCU		0
-#define SYS_CTRL_RST_COPRO		1
-#define SYS_CTRL_RST_ARM0		2
-#define SYS_CTRL_RST_ARM1		3
-#define SYS_CTRL_RST_USBHS		4
-#define SYS_CTRL_RST_USBHSPHYA		5
-#define SYS_CTRL_RST_MACA		6
-#define SYS_CTRL_RST_MAC		SYS_CTRL_RST_MACA
-#define SYS_CTRL_RST_PCIEA		7
-#define SYS_CTRL_RST_SGDMA		8
-#define SYS_CTRL_RST_CIPHER		9
-#define SYS_CTRL_RST_DDR		10
-#define SYS_CTRL_RST_SATA		11
-#define SYS_CTRL_RST_SATA_LINK		12
-#define SYS_CTRL_RST_SATA_PHY		13
-#define SYS_CTRL_RST_PCIEPHY		14
-#define SYS_CTRL_RST_STATIC		15
-#define SYS_CTRL_RST_GPIO		16
-#define SYS_CTRL_RST_UART1		17
-#define SYS_CTRL_RST_UART2		18
-#define SYS_CTRL_RST_MISC		19
-#define SYS_CTRL_RST_I2S		20
-#define SYS_CTRL_RST_SD			21
-#define SYS_CTRL_RST_MACB		22
-#define SYS_CTRL_RST_PCIEB		23
-#define SYS_CTRL_RST_VIDEO		24
-#define SYS_CTRL_RST_DDR_PHY		25
-#define SYS_CTRL_RST_USBHSPHYB		26
-#define SYS_CTRL_RST_USBDEV		27
-#define SYS_CTRL_RST_ARMDBG		29
-#define SYS_CTRL_RST_PLLA		30
-#define SYS_CTRL_RST_PLLB		31
-
-#endif
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/iomap.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/iomap.h
deleted file mode 100644
index 01de7b78ef..0000000000
--- a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/iomap.h
+++ /dev/null
@@ -1,33 +0,0 @@
-#ifndef __MACH_OXNAS_IOMAP_H
-#define __MACH_OXNAS_IOMAP_H
-
-#include <linux/sizes.h>
-
-#define OXNAS_UART1_BASE	0x44200000
-#define OXNAS_UART1_SIZE	SZ_32
-#define OXNAS_UART1_BASE_VA	0xF0000000
-
-#define OXNAS_UART2_BASE	0x44300000
-#define OXNAS_UART2_SIZE	SZ_32
-
-#define OXNAS_PERCPU_BASE	0x47000000
-#define OXNAS_PERCPU_SIZE	SZ_8K
-#define OXNAS_PERCPU_BASE_VA	0xF0002000
-
-#define OXNAS_SYSCRTL_BASE	0x44E00000
-#define OXNAS_SYSCRTL_SIZE	SZ_4K
-#define OXNAS_SYSCRTL_BASE_VA	0xF0004000
-
-#define OXNAS_SECCRTL_BASE	0x44F00000
-#define OXNAS_SECCRTL_SIZE	SZ_4K
-#define OXNAS_SECCRTL_BASE_VA	0xF0005000
-
-#define OXNAS_RPSA_BASE		0x44400000
-#define OXNAS_RPSA_SIZE		SZ_4K
-#define OXNAS_RPSA_BASE_VA	0xF0006000
-
-#define OXNAS_RPSC_BASE		0x44500000
-#define OXNAS_RPSC_SIZE		SZ_4K
-#define OXNAS_RPSC_BASE_VA	0xF0007000
-
-#endif
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/irqs.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/irqs.h
deleted file mode 100644
index bcafd10ae0..0000000000
--- a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/irqs.h
+++ /dev/null
@@ -1,7 +0,0 @@
-#ifndef __ASM_ARCH_IRQS_H
-#define __ASM_ARCH_IRQS_H
-
-#define IRQ_SOFT	1
-#define NR_IRQS		160
-
-#endif
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/smp.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/smp.h
deleted file mode 100644
index 1128635963..0000000000
--- a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/smp.h
+++ /dev/null
@@ -1,34 +0,0 @@
-/*
- * smp.h
- *
- *  Created on: Sep 24, 2013
- *      Author: mahaijun
- */
-
-#ifndef _NAS782X_SMP_H_
-#define _NAS782X_SMP_H_
-
-#include <mach/hardware.h>
-
-extern void ox820_secondary_startup(void);
-extern void ox820_cpu_die(unsigned int cpu);
-
-static inline void write_pen_release(int val)
-{
-	writel(val, HOLDINGPEN_CPU);
-}
-
-static inline int read_pen_release(void)
-{
-	return readl(HOLDINGPEN_CPU);
-}
-
-extern struct smp_operations ox820_smp_ops;
-
-extern unsigned char ox820_fiq_start, ox820_fiq_end;
-extern void v6_dma_map_area(const void *, size_t, int);
-extern void v6_dma_unmap_area(const void *, size_t, int);
-extern void v6_dma_flush_range(const void *, const void *);
-extern void v6_flush_kern_dcache_area(void *, size_t);
-
-#endif /* _NAS782X_SMP_H_ */
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/timex.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/timex.h
deleted file mode 100644
index 4133594d16..0000000000
--- a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/timex.h
+++ /dev/null
@@ -1,6 +0,0 @@
-#ifndef __ASM_ARCH_TIMEX_H
-#define __ASM_ARCH_TIMEX_H
-
-#define CLOCK_TICK_RATE		6250000
-
-#endif
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/uncompress.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/uncompress.h
deleted file mode 100644
index fbc372787e..0000000000
--- a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/uncompress.h
+++ /dev/null
@@ -1,32 +0,0 @@
-/* linux/include/asm-arm/arch-oxnas/uncompress.h
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
-*/
-
-#ifndef __ASM_ARCH_UNCOMPRESS_H
-#define __ASM_ARCH_UNCOMPRESS_H
-
-#define OXNAS_UART1_BASE 0x44200000
-
-static inline void putc(int c)
-{
-	static volatile unsigned char *uart =
-		(volatile unsigned char *)OXNAS_UART1_BASE;
-
-	while (!(uart[5] & 0x20)) {	/* LSR reg THR empty bit */
-		barrier();
-	}
-	uart[0] = c;			/* THR register */
-}
-
-static inline void flush(void)
-{
-}
-
-#define arch_decomp_setup()
-
-#define arch_decomp_wdog()
-
-#endif /* __ASM_ARCH_UNCOMPRESS_H */
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/utils.h b/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/utils.h
deleted file mode 100644
index 910d7019c7..0000000000
--- a/target/linux/oxnas/files/arch/arm/mach-oxnas/include/mach/utils.h
+++ /dev/null
@@ -1,34 +0,0 @@
-#ifndef _NAS782X_UTILS_H
-#define _NAS782X_UTILS_H
-
-#include <linux/io.h>
-#include <mach/hardware.h>
-
-static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask)
-{
-	u32 val = readl_relaxed(p);
-
-	val &= ~mask;
-	writel_relaxed(val, p);
-}
-
-static inline void oxnas_register_set_mask(void __iomem *p, unsigned mask)
-{
-	u32 val = readl_relaxed(p);
-
-	val |= mask;
-	writel_relaxed(val, p);
-}
-
-static inline void oxnas_register_value_mask(void __iomem *p,
-					     unsigned mask, unsigned new_value)
-{
-	/* TODO sanity check mask & new_value = new_value */
-	u32 val = readl_relaxed(p);
-
-	val &= ~mask;
-	val |= new_value;
-	writel_relaxed(val, p);
-}
-
-#endif /* _NAS782X_UTILS_H */
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c b/target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c
deleted file mode 100644
index 31b7c90582..0000000000
--- a/target/linux/oxnas/files/arch/arm/mach-oxnas/mach-ox820.c
+++ /dev/null
@@ -1,183 +0,0 @@
-#include <linux/init.h>
-#include <linux/kernel.h>
-#include <linux/bug.h>
-#include <linux/of_platform.h>
-#include <linux/clocksource.h>
-#include <linux/clk-provider.h>
-#include <linux/clk.h>
-#include <linux/slab.h>
-#include <linux/gfp.h>
-#include <linux/reset.h>
-#include <asm/mach-types.h>
-#include <asm/mach/map.h>
-#include <asm/mach/arch.h>
-#include <asm/page.h>
-#include <mach/iomap.h>
-#include <mach/hardware.h>
-#include <mach/utils.h>
-#include <mach/smp.h>
-
-static struct map_desc ox820_io_desc[] __initdata = {
-	{
-		.virtual = (unsigned long)OXNAS_PERCPU_BASE_VA,
-		.pfn = __phys_to_pfn(OXNAS_PERCPU_BASE),
-		.length = OXNAS_PERCPU_SIZE,
-		.type = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)OXNAS_SYSCRTL_BASE_VA,
-		.pfn = __phys_to_pfn(OXNAS_SYSCRTL_BASE),
-		.length = OXNAS_SYSCRTL_SIZE,
-		.type = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)OXNAS_SECCRTL_BASE_VA,
-		.pfn = __phys_to_pfn(OXNAS_SECCRTL_BASE),
-		.length = OXNAS_SECCRTL_SIZE,
-		.type = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)OXNAS_RPSA_BASE_VA,
-		.pfn = __phys_to_pfn(OXNAS_RPSA_BASE),
-		.length = OXNAS_RPSA_SIZE,
-		.type = MT_DEVICE,
-	},
-	{
-		.virtual = (unsigned long)OXNAS_RPSC_BASE_VA,
-		.pfn = __phys_to_pfn(OXNAS_RPSC_BASE),
-		.length = OXNAS_RPSC_SIZE,
-		.type = MT_DEVICE,
-	},
-};
-
-void __init ox820_map_common_io(void)
-{
-	debug_ll_io_init();
-	iotable_init(ox820_io_desc, ARRAY_SIZE(ox820_io_desc));
-}
-
-static void __init ox820_dt_init(void)
-{
-	int ret;
-
-	ret = of_platform_populate(NULL, of_default_bus_match_table, NULL,
-					NULL);
-
-	if (ret) {
-		pr_err("of_platform_populate failed: %d\n", ret);
-		BUG();
-	}
-
-}
-
-static void __init ox820_timer_init(void)
-{
-	of_clk_init(NULL);
-	clocksource_probe();
-}
-
-void ox820_init_early(void)
-{
-
-}
-
-void ox820_assert_system_reset(enum reboot_mode mode, const char *cmd)
-{
-	u32 value;
-
-/* Assert reset to cores as per power on defaults
- * Don't touch the DDR interface as things will come to an impromptu stop
- * NB Possibly should be asserting reset for PLLB, but there are timing
- *    concerns here according to the docs */
-	value = BIT(SYS_CTRL_RST_COPRO)		|
-		BIT(SYS_CTRL_RST_USBHS)		|
-		BIT(SYS_CTRL_RST_USBHSPHYA)	|
-		BIT(SYS_CTRL_RST_MACA)		|
-		BIT(SYS_CTRL_RST_PCIEA)		|
-		BIT(SYS_CTRL_RST_SGDMA)		|
-		BIT(SYS_CTRL_RST_CIPHER)	|
-		BIT(SYS_CTRL_RST_SATA)		|
-		BIT(SYS_CTRL_RST_SATA_LINK)	|
-		BIT(SYS_CTRL_RST_SATA_PHY)	|
-		BIT(SYS_CTRL_RST_PCIEPHY)	|
-		BIT(SYS_CTRL_RST_STATIC)	|
-		BIT(SYS_CTRL_RST_UART1)		|
-		BIT(SYS_CTRL_RST_UART2)		|
-		BIT(SYS_CTRL_RST_MISC)		|
-		BIT(SYS_CTRL_RST_I2S)		|
-		BIT(SYS_CTRL_RST_SD)		|
-		BIT(SYS_CTRL_RST_MACB)		|
-		BIT(SYS_CTRL_RST_PCIEB)		|
-		BIT(SYS_CTRL_RST_VIDEO)		|
-		BIT(SYS_CTRL_RST_USBHSPHYB)	|
-		BIT(SYS_CTRL_RST_USBDEV);
-
-	writel(value, SYS_CTRL_RST_SET_CTRL);
-
-	/* Release reset to cores as per power on defaults */
-	writel(BIT(SYS_CTRL_RST_GPIO), SYS_CTRL_RST_CLR_CTRL);
-
-	/* Disable clocks to cores as per power-on defaults - must leave DDR
-	 * related clocks enabled otherwise we'll stop rather abruptly. */
-	value =
-		BIT(SYS_CTRL_CLK_COPRO)		|
-		BIT(SYS_CTRL_CLK_DMA)		|
-		BIT(SYS_CTRL_CLK_CIPHER)	|
-		BIT(SYS_CTRL_CLK_SD)		|
-		BIT(SYS_CTRL_CLK_SATA)		|
-		BIT(SYS_CTRL_CLK_I2S)		|
-		BIT(SYS_CTRL_CLK_USBHS)		|
-		BIT(SYS_CTRL_CLK_MAC)		|
-		BIT(SYS_CTRL_CLK_PCIEA)		|
-		BIT(SYS_CTRL_CLK_STATIC)	|
-		BIT(SYS_CTRL_CLK_MACB)		|
-		BIT(SYS_CTRL_CLK_PCIEB)		|
-		BIT(SYS_CTRL_CLK_REF600)	|
-		BIT(SYS_CTRL_CLK_USBDEV);
-
-	writel(value, SYS_CTRL_CLK_CLR_CTRL);
-
-	/* Enable clocks to cores as per power-on defaults */
-
-	/* Set sys-control pin mux'ing as per power-on defaults */
-	writel(0, SYS_CTRL_SECONDARY_SEL);
-	writel(0, SYS_CTRL_TERTIARY_SEL);
-	writel(0, SYS_CTRL_QUATERNARY_SEL);
-	writel(0, SYS_CTRL_DEBUG_SEL);
-	writel(0, SYS_CTRL_ALTERNATIVE_SEL);
-	writel(0, SYS_CTRL_PULLUP_SEL);
-
-	writel(0, SEC_CTRL_SECONDARY_SEL);
-	writel(0, SEC_CTRL_TERTIARY_SEL);
-	writel(0, SEC_CTRL_QUATERNARY_SEL);
-	writel(0, SEC_CTRL_DEBUG_SEL);
-	writel(0, SEC_CTRL_ALTERNATIVE_SEL);
-	writel(0, SEC_CTRL_PULLUP_SEL);
-
-	/* No need to save any state, as the ROM loader can determine whether
-	 * reset is due to power cycling or programatic action, just hit the
-	 * (self-clearing) CPU reset bit of the block reset register */
-	value =
-		BIT(SYS_CTRL_RST_SCU) |
-		BIT(SYS_CTRL_RST_ARM0) |
-		BIT(SYS_CTRL_RST_ARM1);
-
-	writel(value, SYS_CTRL_RST_SET_CTRL);
-}
-
-static const char * const ox820_dt_board_compat[] = {
-	"plxtech,nas7820",
-	"plxtech,nas7821",
-	"plxtech,nas7825",
-	NULL
-};
-
-DT_MACHINE_START(OX820_DT, "PLXTECH NAS782X SoC (Flattened Device Tree)")
-	.map_io		= ox820_map_common_io,
-	.smp		= smp_ops(ox820_smp_ops),
-	.init_early	= ox820_init_early,
-	.init_time	= ox820_timer_init,
-	.init_machine	= ox820_dt_init,
-	.restart	= ox820_assert_system_reset,
-	.dt_compat	= ox820_dt_board_compat,
-MACHINE_END
diff --git a/target/linux/oxnas/files/arch/arm/mach-oxnas/platsmp.c b/target/linux/oxnas/files/arch/arm/mach-oxnas/platsmp.c
deleted file mode 100644
index 8e4e2d8273..0000000000
--- a/target/linux/oxnas/files/arch/arm/mach-oxnas/platsmp.c
+++ /dev/null
@@ -1,315 +0,0 @@
-/*
- *  arch/arm/mach-ox820/platsmp.c
- *
- *  Copyright (C) 2002 ARM Ltd.
- *  All Rights Reserved
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- */
-#include <linux/init.h>
-#include <linux/device.h>
-#include <linux/jiffies.h>
-#include <linux/smp.h>
-#include <linux/io.h>
-#include <linux/dma-mapping.h>
-#include <linux/cache.h>
-#include <asm/cacheflush.h>
-#include <asm/smp_scu.h>
-#include <asm/tlbflush.h>
-#include <asm/cputype.h>
-#include <linux/delay.h>
-#include <asm/fiq.h>
-
-#include <linux/irqchip/arm-gic.h>
-#include <mach/iomap.h>
-#include <mach/smp.h>
-#include <mach/hardware.h>
-#include <mach/irqs.h>
-
-#ifdef CONFIG_DMA_CACHE_FIQ_BROADCAST
-
-#define FIQ_GENERATE		0x00000002
-#define OXNAS_MAP_AREA		0x01000000
-#define OXNAS_UNMAP_AREA	0x02000000
-#define OXNAS_FLUSH_RANGE	0x03000000
-
-struct fiq_req {
-	union {
-		struct {
-			const void *addr;
-			size_t size;
-		} map;
-		struct {
-			const void *addr;
-			size_t size;
-		} unmap;
-		struct {
-			const void *start;
-			const void *end;
-		} flush;
-	};
-	volatile uint flags;
-	void __iomem *reg;
-} ____cacheline_aligned;
-
-static struct fiq_handler fh = {
-	.name = "oxnas-fiq"
-};
-
-DEFINE_PER_CPU(struct fiq_req, fiq_data);
-
-static inline void ox820_set_fiq_regs(unsigned int cpu)
-{
-	struct pt_regs FIQ_regs;
-	struct fiq_req *fiq_req = &per_cpu(fiq_data, !cpu);
-
-	FIQ_regs.ARM_r8 = 0;
-	FIQ_regs.ARM_ip = (unsigned int)fiq_req;
-	FIQ_regs.ARM_sp = (int)(cpu ? RPSC_IRQ_SOFT : RPSA_IRQ_SOFT);
-	fiq_req->reg = cpu ? RPSC_IRQ_SOFT : RPSA_IRQ_SOFT;
-
-	set_fiq_regs(&FIQ_regs);
-}
-
-static void __init ox820_init_fiq(void)
-{
-	void *fiqhandler_start;
-	unsigned int fiqhandler_length;
-	int ret;
-
-	fiqhandler_start = &ox820_fiq_start;
-	fiqhandler_length = &ox820_fiq_end - &ox820_fiq_start;
-
-	ret = claim_fiq(&fh);
-
-	if (ret)
-		return;
-
-	set_fiq_handler(fiqhandler_start, fiqhandler_length);
-
-	writel(IRQ_SOFT, RPSA_FIQ_IRQ_TO_FIQ);
-	writel(1, RPSA_FIQ_ENABLE);
-	writel(IRQ_SOFT, RPSC_FIQ_IRQ_TO_FIQ);
-	writel(1, RPSC_FIQ_ENABLE);
-}
-
-void fiq_dma_map_area(const void *addr, size_t size, int dir)
-{
-	unsigned long flags;
-	struct fiq_req *req;
-
-	raw_local_irq_save(flags);
-	/* currently, not possible to take cpu0 down, so only check cpu1 */
-	if (!cpu_online(1)) {
-		raw_local_irq_restore(flags);
-		v6_dma_map_area(addr, size, dir);
-		return;
-	}
-
-	req = this_cpu_ptr(&fiq_data);
-	req->map.addr = addr;
-	req->map.size = size;
-	req->flags = dir | OXNAS_MAP_AREA;
-	smp_mb();
-
-	writel_relaxed(FIQ_GENERATE, req->reg);
-
-	v6_dma_map_area(addr, size, dir);
-	while (req->flags)
-		barrier();
-
-	raw_local_irq_restore(flags);
-}
-
-void fiq_dma_unmap_area(const void *addr, size_t size, int dir)
-{
-	unsigned long flags;
-	struct fiq_req *req;
-
-	raw_local_irq_save(flags);
-	/* currently, not possible to take cpu0 down, so only check cpu1 */
-	if (!cpu_online(1)) {
-		raw_local_irq_restore(flags);
-		v6_dma_unmap_area(addr, size, dir);
-		return;
-	}
-
-	req = this_cpu_ptr(&fiq_data);
-	req->unmap.addr = addr;
-	req->unmap.size = size;
-	req->flags = dir | OXNAS_UNMAP_AREA;
-	smp_mb();
-
-	writel_relaxed(FIQ_GENERATE, req->reg);
-
-	v6_dma_unmap_area(addr, size, dir);
-	while (req->flags)
-		barrier();
-
-	raw_local_irq_restore(flags);
-}
-
-void fiq_dma_flush_range(const void *start, const void *end)
-{
-	unsigned long flags;
-	struct fiq_req *req;
-
-	raw_local_irq_save(flags);
-	/* currently, not possible to take cpu0 down, so only check cpu1 */
-	if (!cpu_online(1)) {
-		raw_local_irq_restore(flags);
-		v6_dma_flush_range(start, end);
-		return;
-	}
-
-	req = this_cpu_ptr(&fiq_data);
-
-	req->flush.start = start;
-	req->flush.end = end;
-	req->flags = OXNAS_FLUSH_RANGE;
-	smp_mb();
-
-	writel_relaxed(FIQ_GENERATE, req->reg);
-
-	v6_dma_flush_range(start, end);
-
-	while (req->flags)
-		barrier();
-
-	raw_local_irq_restore(flags);
-}
-
-void fiq_flush_kern_dcache_area(void *addr, size_t size)
-{
-	fiq_dma_flush_range(addr, addr + size);
-}
-#else
-
-#define ox820_set_fiq_regs(cpu)	do {} while (0) /* nothing */
-#define ox820_init_fiq()	do {} while (0) /* nothing */
-
-#endif /* DMA_CACHE_FIQ_BROADCAST */
-
-static DEFINE_SPINLOCK(boot_lock);
-
-void ox820_secondary_init(unsigned int cpu)
-{
-	/*
-	 * Setup Secondary Core FIQ regs
-	 */
-	ox820_set_fiq_regs(1);
-
-	/*
-	 * let the primary processor know we're out of the
-	 * pen, then head off into the C entry point
-	 */
-	write_pen_release(-1);
-
-	/*
-	 * Synchronise with the boot thread.
-	 */
-	spin_lock(&boot_lock);
-	spin_unlock(&boot_lock);
-}
-
-int ox820_boot_secondary(unsigned int cpu, struct task_struct *idle)
-{
-	unsigned long timeout;
-
-	/*
-	 * Set synchronisation state between this boot processor
-	 * and the secondary one
-	 */
-	spin_lock(&boot_lock);
-
-	/*
-	 * This is really belt and braces; we hold unintended secondary
-	 * CPUs in the holding pen until we're ready for them.  However,
-	 * since we haven't sent them a soft interrupt, they shouldn't
-	 * be there.
-	 */
-	write_pen_release(cpu);
-
-	writel(1, IOMEM(OXNAS_GICN_BASE_VA(cpu) + GIC_CPU_CTRL));
-
-	/*
-	 * Send the secondary CPU a soft interrupt, thereby causing
-	 * the boot monitor to read the system wide flags register,
-	 * and branch to the address found there.
-	 */
-
-	arch_send_wakeup_ipi_mask(cpumask_of(cpu));
-	timeout = jiffies + (1 * HZ);
-	while (time_before(jiffies, timeout)) {
-		smp_rmb();
-		if (read_pen_release() == -1)
-			break;
-
-		udelay(10);
-	}
-
-	/*
-	 * now the secondary core is starting up let it run its
-	 * calibrations, then wait for it to finish
-	 */
-	spin_unlock(&boot_lock);
-
-	return read_pen_release() != -1 ? -ENOSYS : 0;
-}
-
-void *scu_base_addr(void)
-{
-	return IOMEM(OXNAS_SCU_BASE_VA);
-}
-
-/*
- * Initialise the CPU possible map early - this describes the CPUs
- * which may be present or become present in the system.
- */
-static void __init ox820_smp_init_cpus(void)
-{
-	void __iomem *scu_base = scu_base_addr();
-	unsigned int i, ncores;
-
-	ncores = scu_base ? scu_get_core_count(scu_base) : 1;
-
-	/* sanity check */
-	if (ncores > nr_cpu_ids) {
-		pr_warn("SMP: %u cores greater than maximum (%u), clipping\n",
-			ncores, nr_cpu_ids);
-		ncores = nr_cpu_ids;
-	}
-
-	for (i = 0; i < ncores; i++)
-		set_cpu_possible(i, true);
-}
-
-static void __init ox820_smp_prepare_cpus(unsigned int max_cpus)
-{
-
-	scu_enable(scu_base_addr());
-
-	/*
-	 * Write the address of secondary startup into the
-	 * system-wide flags register. The BootMonitor waits
-	 * until it receives a soft interrupt, and then the
-	 * secondary CPU branches to this address.
-	 */
-	writel(virt_to_phys(ox820_secondary_startup),
-					HOLDINGPEN_LOCATION);
-	ox820_init_fiq();
-
-	ox820_set_fiq_regs(0);
-}
-
-struct smp_operations ox820_smp_ops __initdata = {
-	.smp_init_cpus		= ox820_smp_init_cpus,
-	.smp_prepare_cpus	= ox820_smp_prepare_cpus,
-	.smp_secondary_init	= ox820_secondary_init,
-	.smp_boot_secondary	= ox820_boot_secondary,
-#ifdef CONFIG_HOTPLUG_CPU
-	.cpu_die		= ox820_cpu_die,
-#endif
-};
diff --git a/target/linux/oxnas/files/drivers/ata/sata_oxnas.c b/target/linux/oxnas/files/drivers/ata/sata_oxnas.c
deleted file mode 100644
index 291a06f959..0000000000
--- a/target/linux/oxnas/files/drivers/ata/sata_oxnas.c
+++ /dev/null
@@ -1,2477 +0,0 @@
-/*
- * sata_oxnas
- *      A driver to interface the 934 based sata core present in the ox820
- *      with libata and scsi
- * based on sata_oxnas driver by Ma Haijun <mahaijuns@gmail.com>
- * based on ox820 sata code by:
- *  Copyright (c) 2007 Oxford Semiconductor Ltd.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2, or (at your option)
- * any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- */
-
-#include <linux/ata.h>
-#include <linux/libata.h>
-#include <linux/of_platform.h>
-#include <linux/delay.h>
-#include <linux/module.h>
-#include <linux/slab.h>
-#include <linux/spinlock.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/clk.h>
-#include <linux/reset.h>
-
-#include <mach/utils.h>
-
-/* sgdma request structure */
-struct sgdma_request {
-	volatile u32 qualifier;
-	volatile u32 control;
-	dma_addr_t src_pa;
-	dma_addr_t dst_pa;
-} __packed __aligned(4);
-
-
-/* Controller information */
-enum {
-	SATA_OXNAS_MAX_PRD = 254,
-	SATA_OXNAS_DMA_SIZE = SATA_OXNAS_MAX_PRD *
-				sizeof(struct ata_bmdma_prd) +
-				sizeof(struct sgdma_request),
-	SATA_OXNAS_MAX_PORTS	= 2,
-	/** The different Oxsemi SATA core version numbers */
-	SATA_OXNAS_CORE_VERSION = 0x1f3,
-	SATA_OXNAS_IRQ_FLAG	= IRQF_SHARED,
-	SATA_OXNAS_HOST_FLAGS	= (ATA_FLAG_SATA | ATA_FLAG_PIO_DMA |
-			ATA_FLAG_NO_ATAPI /*| ATA_FLAG_NCQ*/),
-	SATA_OXNAS_QUEUE_DEPTH	= 32,
-
-	SATA_OXNAS_DMA_BOUNDARY = 0xFFFFFFFF,
-};
-
-
-/*
- * SATA Port Registers
- */
-enum {
-	/** sata host port register offsets */
-	ORB1 = 0x00,
-	ORB2 = 0x04,
-	ORB3 = 0x08,
-	ORB4 = 0x0C,
-	ORB5 = 0x10,
-	MASTER_STATUS = 0x10,
-	FIS_CTRL = 0x18,
-	FIS_DATA = 0x1C,
-	INT_STATUS = 0x30,
-	INT_CLEAR = 0x30,
-	INT_ENABLE = 0x34,
-	INT_DISABLE = 0x38,
-	VERSION = 0x3C,
-	SATA_CONTROL = 0x5C,
-	SATA_COMMAND = 0x60,
-	HID_FEATURES = 0x64,
-	PORT_CONTROL = 0x68,
-	DRIVE_CONTROL = 0x6C,
-	/** These registers allow access to the link layer registers
-	that reside in a different clock domain to the processor bus */
-	LINK_DATA = 0x70,
-	LINK_RD_ADDR = 0x74,
-	LINK_WR_ADDR = 0x78,
-	LINK_CONTROL = 0x7C,
-	/* window control */
-	WIN1LO = 0x80,
-	WIN1HI = 0x84,
-	WIN2LO = 0x88,
-	WIN2HI = 0x8C,
-	WIN0_CONTROL = 0x90,
-};
-
-/** sata port register bits */
-enum{
-	/**
-	 * commands to issue in the master status to tell it to move shadow ,
-	 * registers to the actual device ,
-	 */
-	SATA_OPCODE_MASK = 0x00000007,
-	CMD_WRITE_TO_ORB_REGS_NO_COMMAND = 0x4,
-	CMD_WRITE_TO_ORB_REGS = 0x2,
-	CMD_SYNC_ESCAPE = 0x7,
-	CMD_CORE_BUSY = (1 << 7),
-	CMD_DRIVE_SELECT_SHIFT = 12,
-	CMD_DRIVE_SELECT_MASK = (0xf << CMD_DRIVE_SELECT_SHIFT),
-
-	/** interrupt bits */
-	INT_END_OF_CMD = 1 << 0,
-	INT_LINK_SERROR = 1 << 1,
-	INT_ERROR = 1 << 2,
-	INT_LINK_IRQ = 1 << 3,
-	INT_REG_ACCESS_ERR = 1 << 7,
-	INT_BIST_FIS = 1 << 11,
-	INT_MASKABLE =	INT_END_OF_CMD |
-			INT_LINK_SERROR |
-			INT_ERROR |
-			INT_LINK_IRQ |
-			INT_REG_ACCESS_ERR |
-			INT_BIST_FIS,
-	INT_WANT =	INT_END_OF_CMD |
-			INT_LINK_SERROR |
-			INT_REG_ACCESS_ERR |
-			INT_ERROR,
-	INT_ERRORS =	INT_LINK_SERROR |
-			INT_REG_ACCESS_ERR |
-			INT_ERROR,
-
-	/** raw interrupt bits, unmaskable, but do not generate interrupts */
-	RAW_END_OF_CMD  = INT_END_OF_CMD << 16,
-	RAW_LINK_SERROR = INT_LINK_SERROR  << 16,
-	RAW_ERROR  = INT_ERROR << 16,
-	RAW_LINK_IRQ  = INT_LINK_IRQ << 16,
-	RAW_REG_ACCESS_ERR = INT_REG_ACCESS_ERR << 16,
-	RAW_BIST_FIS  = INT_BIST_FIS << 16,
-	RAW_WANT  = INT_WANT << 16,
-	RAW_ERRORS  = INT_ERRORS << 16,
-
-	/**
-	 * variables to write to the device control register to set the current
-	 * device, ie. master or slave.
-	 */
-	DR_CON_48 = 2,
-	DR_CON_28 = 0,
-
-	SATA_CTL_ERR_MASK = 0x00000016,
-
-};
-
-/* ATA SGDMA register offsets */
-enum {
-	SGDMA_CONTROL = 0x0,
-	SGDMA_STATUS = 0x4,
-	SGDMA_REQUESTPTR = 0x8,
-	SGDMA_RESETS = 0xC,
-	SGDMA_CORESIZE = 0x10,
-};
-
-/* DMA controller register offsets */
-enum {
-	DMA_CONTROL = 0x0,
-	DMA_CORESIZE = 0x20,
-
-	DMA_CONTROL_RESET = (1 << 12),
-};
-
-enum {
-	/* see DMA core docs for the values. Out means from memory (bus A) out
-	 * to disk (bus B) */
-	SGDMA_REQCTL0OUT = 0x0497c03d,
-	/* burst mode disabled when no micro code used */
-	SGDMA_REQCTL0IN = 0x0493a3c1,
-	SGDMA_REQCTL1OUT = 0x0497c07d,
-	SGDMA_REQCTL1IN = 0x0497a3c5,
-	SGDMA_CONTROL_NOGO = 0x3e,
-	SGDMA_CONTROL_GO = SGDMA_CONTROL_NOGO | 1,
-	SGDMA_ERRORMASK = 0x3f,
-	SGDMA_BUSY = 0x80,
-
-	SGDMA_RESETS_CTRL = 1 << 0,
-	SGDMA_RESETS_ARBT = 1 << 1,
-	SGDMA_RESETS_AHB = 1 << 2,
-	SGDMA_RESETS_ALL =	SGDMA_RESETS_CTRL |
-				SGDMA_RESETS_ARBT |
-				SGDMA_RESETS_AHB,
-
-	/* Final EOTs */
-	SGDMA_REQQUAL = 0x00220001,
-
-};
-
-/** SATA core register offsets */
-enum {
-	DM_DBG1 = 0x000,
-	RAID_SET = 0x004,
-	DM_DBG2 = 0x008,
-	DATACOUNT_PORT0 = 0x010,
-	DATACOUNT_PORT1 = 0x014,
-	CORE_INT_STATUS = 0x030,
-	CORE_INT_CLEAR = 0x030,
-	CORE_INT_ENABLE = 0x034,
-	CORE_INT_DISABLE  = 0x038,
-	CORE_REBUILD_ENABLE = 0x050,
-	CORE_FAILED_PORT_R = 0x054,
-	DEVICE_CONTROL = 0x068,
-	EXCESS = 0x06C,
-	RAID_SIZE_LOW = 0x070,
-	RAID_SIZE_HIGH = 0x074,
-	PORT_ERROR_MASK = 0x078,
-	IDLE_STATUS = 0x07C,
-	RAID_CONTROL = 0x090,
-	DATA_PLANE_CTRL = 0x0AC,
-	CORE_DATAPLANE_STAT = 0x0b8,
-	PROC_PC = 0x100,
-	CONFIG_IN = 0x3d8,
-	PROC_START = 0x3f0,
-	PROC_RESET = 0x3f4,
-	UCODE_STORE = 0x1000,
-	RAID_WP_BOT_LOW = 0x1FF0,
-	RAID_WP_BOT_HIGH  = 0x1FF4,
-	RAID_WP_TOP_LOW = 0x1FF8,
-	RAID_WP_TOP_HIGH = 0x1FFC,
-	DATA_MUX_RAM0 = 0x8000,
-	DATA_MUX_RAM1 = 0xA000,
-	PORT_SIZE = 0x10000,
-};
-
-enum {
-	/* Sata core debug1 register bits */
-	CORE_PORT0_DATA_DIR_BIT = 20,
-	CORE_PORT1_DATA_DIR_BIT = 21,
-	CORE_PORT0_DATA_DIR = 1 << CORE_PORT0_DATA_DIR_BIT,
-	CORE_PORT1_DATA_DIR = 1 << CORE_PORT1_DATA_DIR_BIT,
-
-	/** sata core control register bits */
-	SCTL_CLR_ERR = 0x00003016,
-	RAID_CLR_ERR = 0x0000011e,
-
-	/* Interrupts direct from the ports */
-	NORMAL_INTS_WANTED = 0x00000303,
-
-	/* shift these left by port number */
-	COREINT_HOST = 0x00000001,
-	COREINT_END = 0x00000100,
-	CORERAW_HOST = COREINT_HOST << 16,
-	CORERAW_END = COREINT_END  << 16,
-
-	/* Interrupts from the RAID controller only */
-	RAID_INTS_WANTED = 0x00008300,
-
-	/* The bits in the IDLE_STATUS that, when set indicate an idle core */
-	IDLE_CORES = (1 << 18) | (1 << 19),
-
-	/* Data plane control error-mask mask and bit, these bit in the data
-	 * plane control mask out errors from the ports that prevent the SGDMA
-	 * care from sending an interrupt */
-	DPC_ERROR_MASK = 0x00000300,
-	DPC_ERROR_MASK_BIT = 0x00000100,
-	/* enable jbod micro-code */
-	DPC_JBOD_UCODE = 1 << 0,
-	DPC_FIS_SWCH = 1 << 1,
-
-	/** Device Control register bits */
-	DEVICE_CONTROL_DMABT = 1 << 4,
-	DEVICE_CONTROL_ABORT = 1 << 2,
-	DEVICE_CONTROL_PAD = 1 << 3,
-	DEVICE_CONTROL_PADPAT = 1 << 16,
-	DEVICE_CONTROL_PRTRST = 1 << 8,
-	DEVICE_CONTROL_RAMRST = 1 << 12,
-	DEVICE_CONTROL_ATA_ERR_OVERRIDE = 1 << 28,
-
-	/** oxsemi HW raid modes */
-	OXNASSATA_NOTRAID = 0,
-	OXNASSATA_RAID0 = 1,
-	OXNASSATA_RAID1 = 2,
-	/** OX820 specific HW-RAID register values */
-	RAID_TWODISKS = 3,
-	UNKNOWN_MODE = ~0,
-
-	CONFIG_IN_RESUME = 2,
-};
-
-/* SATA PHY Registers */
-enum {
-	PHY_STAT = 0x00,
-	PHY_DATA = 0x04,
-};
-
-enum {
-	STAT_READ_VALID = (1 << 21),
-	STAT_CR_ACK = (1 << 20),
-	STAT_CR_READ = (1 << 19),
-	STAT_CR_WRITE = (1 << 18),
-	STAT_CAP_DATA = (1 << 17),
-	STAT_CAP_ADDR = (1 << 16),
-
-	STAT_ACK_ANY =	STAT_CR_ACK |
-			STAT_CR_READ |
-			STAT_CR_WRITE |
-			STAT_CAP_DATA |
-			STAT_CAP_ADDR,
-
-	CR_READ_ENABLE = (1 << 16),
-	CR_WRITE_ENABLE = (1 << 17),
-	CR_CAP_DATA = (1 << 18),
-};
-
-enum {
-	/* Link layer registers */
-	SERROR_IRQ_MASK = 5,
-};
-
-enum {
-	OXNAS_SATA_SOFTRESET = 1,
-	OXNAS_SATA_REINIT = 2,
-};
-
-enum {
-	OXNAS_SATA_UCODE_RAID0,
-	OXNAS_SATA_UCODE_RAID1,
-	OXNAS_SATA_UCODE_JBOD,
-	OXNAS_SATA_UCODE_NONE,
-};
-
-enum {
-	SATA_UNLOCKED,
-	SATA_WRITER,
-	SATA_READER,
-	SATA_REBUILD,
-	SATA_HWRAID,
-	SATA_SCSI_STACK
-};
-
-typedef irqreturn_t (*oxnas_sata_isr_callback_t)(int, unsigned long, int);
-
-struct sata_oxnas_host_priv {
-	void __iomem *port_base;
-	void __iomem *dmactl_base;
-	void __iomem *sgdma_base;
-	void __iomem *core_base;
-	void __iomem *phy_base;
-	dma_addr_t dma_base;
-	void __iomem *dma_base_va;
-	size_t dma_size;
-	int irq;
-	int n_ports;
-	int current_ucode;
-	u32 port_frozen;
-	u32 port_in_eh;
-	struct clk *clk;
-	struct reset_control *rst_sata;
-	struct reset_control *rst_link;
-	struct reset_control *rst_phy;
-	spinlock_t phy_lock;
-	spinlock_t core_lock;
-	int core_locked;
-	int reentrant_port_no;
-	int hw_lock_count;
-	int direct_lock_count;
-	void *locker_uid;
-	int current_locker_type;
-	int scsi_nonblocking_attempts;
-	oxnas_sata_isr_callback_t isr_callback;
-	void *isr_arg;
-	wait_queue_head_t fast_wait_queue;
-	wait_queue_head_t scsi_wait_queue;
-};
-
-
-struct sata_oxnas_port_priv {
-	void __iomem *port_base;
-	void __iomem *dmactl_base;
-	void __iomem *sgdma_base;
-	void __iomem *core_base;
-	struct sgdma_request *sgdma_request;
-	dma_addr_t sgdma_request_pa;
-};
-
-static u8 sata_oxnas_check_status(struct ata_port *ap);
-static int sata_oxnas_cleanup(struct ata_host *ah);
-static void sata_oxnas_tf_load(struct ata_port *ap,
-				const struct ata_taskfile *tf);
-static void sata_oxnas_irq_on(struct ata_port *ap);
-static void sata_oxnas_post_reset_init(struct ata_port *ap);
-
-static int sata_oxnas_acquire_hw(struct ata_port *ap, int may_sleep,
-				 int timeout_jiffies);
-static void sata_oxnas_release_hw(struct ata_port *ap);
-
-static const void *HW_LOCKER_UID = (void *)0xdeadbeef;
-
-/***************************************************************************
-* ASIC access
-***************************************************************************/
-static void wait_cr_ack(void __iomem *phy_base)
-{
-	while ((ioread32(phy_base + PHY_STAT) >> 16) & 0x1f)
-		; /* wait for an ack bit to be set */
-}
-
-static u16 read_cr(void __iomem *phy_base, u16 address)
-{
-	iowrite32((u32)address, phy_base + PHY_STAT);
-	wait_cr_ack(phy_base);
-	iowrite32(CR_READ_ENABLE, phy_base + PHY_DATA);
-	wait_cr_ack(phy_base);
-	return (u16)ioread32(phy_base + PHY_STAT);
-}
-
-static void write_cr(void __iomem *phy_base, u16 data, u16 address)
-{
-	iowrite32((u32)address, phy_base + PHY_STAT);
-	wait_cr_ack(phy_base);
-	iowrite32((data | CR_CAP_DATA), phy_base + PHY_DATA);
-	wait_cr_ack(phy_base);
-	iowrite32(CR_WRITE_ENABLE, phy_base + PHY_DATA);
-	wait_cr_ack(phy_base);
-}
-
-#define PH_GAIN		 2
-#define FR_GAIN		 3
-#define PH_GAIN_OFFSET  6
-#define FR_GAIN_OFFSET  8
-#define PH_GAIN_MASK  (0x3 << PH_GAIN_OFFSET)
-#define FR_GAIN_MASK  (0x3 << FR_GAIN_OFFSET)
-#define USE_INT_SETTING  (1<<5)
-
-void workaround5458(struct ata_host *ah)
-{
-	struct sata_oxnas_host_priv *hd = ah->private_data;
-	void __iomem *phy_base = hd->phy_base;
-	u16 rx_control;
-	unsigned i;
-
-	for (i = 0; i < 2; i++) {
-		rx_control = read_cr(phy_base, 0x201d + (i << 8));
-		rx_control &= ~(PH_GAIN_MASK | FR_GAIN_MASK);
-		rx_control |= PH_GAIN << PH_GAIN_OFFSET;
-		rx_control |= (FR_GAIN << FR_GAIN_OFFSET) | USE_INT_SETTING;
-		write_cr(phy_base, rx_control, 0x201d+(i<<8));
-	}
-}
-
-/**
- * allows access to the link layer registers
- * @param link_reg the link layer register to access (oxsemi indexing ie
- *		00 = static config, 04 = phy ctrl)
- */
-void sata_oxnas_link_write(struct ata_port *ap, unsigned int link_reg, u32 val)
-{
-	struct sata_oxnas_port_priv *pd = ap->private_data;
-	struct sata_oxnas_host_priv *hd = ap->host->private_data;
-	void __iomem *port_base = pd->port_base;
-	u32 patience;
-	unsigned long flags;
-
-	DPRINTK("P%d [0x%02x]->0x%08x\n", ap->port_no, link_reg, val);
-
-	spin_lock_irqsave(&hd->phy_lock, flags);
-	iowrite32(val, port_base + LINK_DATA);
-
-	/* accessed twice as a work around for a bug in the SATA abp bridge
-	 * hardware (bug 6828) */
-	iowrite32(link_reg , port_base + LINK_WR_ADDR);
-	ioread32(port_base + LINK_WR_ADDR);
-
-	for (patience = 0x100000; patience > 0; --patience) {
-		if (ioread32(port_base + LINK_CONTROL) & 0x00000001)
-			break;
-	}
-	spin_unlock_irqrestore(&hd->phy_lock, flags);
-}
-
-static int sata_oxnas_scr_write_port(struct ata_port *ap, unsigned int sc_reg,
-					u32 val)
-{
-	sata_oxnas_link_write(ap, 0x20 + (sc_reg * 4), val);
-	return 0;
-}
-
-static int sata_oxnas_scr_write(struct ata_link *link, unsigned int sc_reg,
-				u32 val)
-{
-	return sata_oxnas_scr_write_port(link->ap, sc_reg, val);
-}
-
-u32 sata_oxnas_link_read(struct ata_port *ap, unsigned int link_reg)
-{
-	struct sata_oxnas_port_priv *pd = ap->private_data;
-	struct sata_oxnas_host_priv *hd = ap->host->private_data;
-	void __iomem *port_base = pd->port_base;
-	u32 result;
-	u32 patience;
-	unsigned long flags;
-
-	spin_lock_irqsave(&hd->phy_lock, flags);
-	/* accessed twice as a work around for a bug in the SATA abp bridge
-	 * hardware (bug 6828) */
-	iowrite32(link_reg, port_base + LINK_RD_ADDR);
-	ioread32(port_base + LINK_RD_ADDR);
-
-	for (patience = 0x100000; patience > 0; --patience) {
-		if (ioread32(port_base + LINK_CONTROL) & 0x00000001)
-			break;
-	}
-	if (patience == 0)
-		DPRINTK("link read timed out for port %d\n", ap->port_no);
-
-	result = ioread32(port_base + LINK_DATA);
-	spin_unlock_irqrestore(&hd->phy_lock, flags);
-
-	return result;
-}
-
-static int sata_oxnas_scr_read_port(struct ata_port *ap, unsigned int sc_reg,
-					u32 *val)
-{
-	*val = sata_oxnas_link_read(ap, 0x20 + (sc_reg*4));
-	return 0;
-}
-
-static int sata_oxnas_scr_read(struct ata_link *link,
-			     unsigned int sc_reg, u32 *val)
-{
-	return sata_oxnas_scr_read_port(link->ap, sc_reg, val);
-}
-
-/**
- * sata_oxnas_irq_clear is called during probe just before the interrupt handler is
- * registered, to be sure hardware is quiet. It clears and masks interrupt bits
- * in the SATA core.
- *
- * @param ap hardware with the registers in
- */
-static void sata_oxnas_irq_clear(struct ata_port *ap)
-{
-	struct sata_oxnas_port_priv *port_priv = ap->private_data;
-
-	/* clear pending interrupts */
-	iowrite32(~0, port_priv->port_base + INT_CLEAR);
-	iowrite32(COREINT_END, port_priv->core_base + CORE_INT_CLEAR);
-}
-
-/**
- * qc_issue is used to make a command active, once the hardware and S/G tables
- * have been prepared. IDE BMDMA drivers use the helper function
- * ata_qc_issue_prot() for taskfile protocol-based dispatch. More advanced
- * drivers roll their own ->qc_issue implementation, using this as the
- * "issue new ATA command to hardware" hook.
- * @param qc the queued command to issue
- */
-static unsigned int sata_oxnas_qc_issue(struct ata_queued_cmd *qc)
-{
-	struct sata_oxnas_port_priv *pd = qc->ap->private_data;
-	struct sata_oxnas_host_priv *hd = qc->ap->host->private_data;
-
-	void __iomem *port_base = pd->port_base;
-	void __iomem *core_base = pd->core_base;
-	int port_no = qc->ap->port_no;
-	int no_microcode = (hd->current_ucode == UNKNOWN_MODE);
-	u32 reg;
-
-	/* check the core is idle */
-	if (ioread32(port_base + SATA_COMMAND) & CMD_CORE_BUSY) {
-		int count = 0;
-
-		DPRINTK("core busy for a command on port %d\n",
-			qc->ap->port_no);
-		do {
-			mdelay(1);
-			if (++count > 100) {
-				DPRINTK("core busy for a command on port %d\n",
-					qc->ap->port_no);
-				/* CrazyDumpDebug(); */
-				sata_oxnas_cleanup(qc->ap->host);
-			}
-		} while (ioread32(port_base + SATA_COMMAND) & CMD_CORE_BUSY);
-	}
-
-	/* enable passing of error signals to DMA sub-core by clearing the
-	 * appropriate bit */
-	reg = ioread32(core_base + DATA_PLANE_CTRL);
-	if (no_microcode)
-		reg |= (DPC_ERROR_MASK_BIT | (DPC_ERROR_MASK_BIT << 1));
-	reg &= ~(DPC_ERROR_MASK_BIT << port_no);
-	iowrite32(reg, core_base + DATA_PLANE_CTRL);
-
-	/* Disable all interrupts for ports and RAID controller */
-	iowrite32(~0, port_base + INT_DISABLE);
-
-	/* Disable all interrupts for core */
-	iowrite32(~0, core_base + CORE_INT_DISABLE);
-	wmb();
-
-	/* Load the command settings into the orb registers */
-	sata_oxnas_tf_load(qc->ap, &qc->tf);
-
-	/* both pio and dma commands use dma */
-	if (ata_is_dma(qc->tf.protocol) || ata_is_pio(qc->tf.protocol)) {
-		/* Start the DMA */
-		iowrite32(SGDMA_CONTROL_GO,	pd->sgdma_base + SGDMA_CONTROL);
-		wmb();
-	}
-
-	/* enable End of command interrupt */
-	iowrite32(INT_WANT, port_base + INT_ENABLE);
-	iowrite32(COREINT_END, core_base + CORE_INT_ENABLE);
-	wmb();
-
-	/* Start the command */
-	reg = ioread32(port_base + SATA_COMMAND);
-	reg &= ~SATA_OPCODE_MASK;
-	reg |= CMD_WRITE_TO_ORB_REGS;
-	iowrite32(reg , port_base + SATA_COMMAND);
-	wmb();
-
-	return 0;
-}
-
-/**
- * Will schedule the libATA error handler on the premise that there has
- * been a hotplug event on the port specified
- */
-void sata_oxnas_checkforhotplug(struct ata_port *ap)
-{
-	DPRINTK("ENTER\n");
-
-	ata_ehi_hotplugged(&ap->link.eh_info);
-	ata_port_freeze(ap);
-}
-
-
-/**************************************************************************/
-/* Locking                                                                */
-/**************************************************************************/
-/**
- * The underlying function that controls access to the sata core
- *
- * @return non-zero indicates that you have acquired exclusive access to the
- *         sata core.
- */
-static int __acquire_sata_core(
-	struct ata_host *ah,
-	int port_no,
-	oxnas_sata_isr_callback_t callback,
-	void                    *arg,
-	int                      may_sleep,
-	int                      timeout_jiffies,
-	int                      hw_access,
-	void                    *uid,
-	int                      locker_type)
-{
-	unsigned long end = jiffies + timeout_jiffies;
-	int           acquired = 0;
-	unsigned long flags;
-	int           timed_out = 0;
-	struct sata_oxnas_host_priv *hd;
-
-	DEFINE_WAIT(wait);
-
-	if (!ah)
-		return acquired;
-
-	hd = ah->private_data;
-
-	spin_lock_irqsave(&hd->core_lock, flags);
-
-	DPRINTK("Entered uid %p, port %d, h/w count %d, d count %d, "
-		    "callback %p, hw_access %d, core_locked %d, "
-		    "reentrant_port_no %d, isr_callback %p\n",
-		uid, port_no, hd->hw_lock_count, hd->direct_lock_count,
-		callback, hw_access, hd->core_locked, hd->reentrant_port_no,
-		hd->isr_callback);
-
-	while (!timed_out) {
-		if (hd->core_locked ||
-		    (!hw_access && hd->scsi_nonblocking_attempts)) {
-			/* Can only allow access if from SCSI/SATA stack and if
-			 * reentrant access is allowed and this access is to the
-			 * same port for which the lock is current held
-			 */
-			if (hw_access && (port_no == hd->reentrant_port_no)) {
-				BUG_ON(!hd->hw_lock_count);
-				++(hd->hw_lock_count);
-
-				DPRINTK("Allow SCSI/SATA re-entrant access to "
-					"uid %p port %d\n", uid, port_no);
-				acquired = 1;
-				break;
-			} else if (!hw_access) {
-				if ((locker_type == SATA_READER) &&
-				    (hd->current_locker_type == SATA_READER)) {
-					WARN(1,
-						"Already locked by reader, "
-						"uid %p, locker_uid %p, "
-						"port %d, h/w count %d, "
-						"d count %d, hw_access %d\n",
-						uid, hd->locker_uid, port_no,
-						hd->hw_lock_count,
-						hd->direct_lock_count,
-						hw_access);
-					goto check_uid;
-				}
-
-				if ((locker_type != SATA_READER) &&
-				    (locker_type != SATA_WRITER)) {
-					goto wait_for_lock;
-				}
-
-check_uid:
-				WARN(uid == hd->locker_uid, "Attempt to lock "
-					"by locker type %d uid %p, already "
-					"locked by locker type %d with "
-					"locker_uid %p, port %d, "
-					"h/w count %d, d count %d, "
-					"hw_access %d\n", locker_type, uid,
-					hd->current_locker_type,
-					hd->locker_uid, port_no,
-					hd->hw_lock_count,
-					hd->direct_lock_count, hw_access);
-			}
-		} else {
-			WARN(hd->hw_lock_count || hd->direct_lock_count,
-				"Core unlocked but counts non-zero: uid %p, "
-				"locker_uid %p, port %d, h/w count %d, "
-				"d count %d, hw_access %d\n", uid,
-				hd->locker_uid, port_no, hd->hw_lock_count,
-				hd->direct_lock_count, hw_access);
-
-			BUG_ON(hd->current_locker_type != SATA_UNLOCKED);
-
-			WARN(hd->locker_uid, "Attempt to lock uid %p when "
-				"locker_uid %p is non-zero,  port %d, "
-				"h/w count %d, d count %d, hw_access %d\n",
-				uid, hd->locker_uid, port_no, hd->hw_lock_count,
-				hd->direct_lock_count, hw_access);
-
-			if (!hw_access) {
-				/* Direct access attempting to acquire
-				 * non-contented lock
-				 */
-				/* Must have callback for direct access */
-				BUG_ON(!callback);
-				/* Sanity check lock state */
-				BUG_ON(hd->reentrant_port_no != -1);
-
-				hd->isr_callback = callback;
-				hd->isr_arg = arg;
-				++(hd->direct_lock_count);
-
-				hd->current_locker_type = locker_type;
-			} else {
-				/* SCSI/SATA attempting to acquire
-				 * non-contented lock
-				 */
-				/* No callbacks for SCSI/SATA access */
-				BUG_ON(callback);
-				/* No callback args for SCSI/SATA access */
-				BUG_ON(arg);
-
-				/* Sanity check lock state */
-				BUG_ON(hd->isr_callback);
-				BUG_ON(hd->isr_arg);
-
-				++(hd->hw_lock_count);
-				hd->reentrant_port_no = port_no;
-
-				hd->current_locker_type = SATA_SCSI_STACK;
-			}
-
-			hd->core_locked = 1;
-			hd->locker_uid = uid;
-			acquired = 1;
-			break;
-		}
-
-wait_for_lock:
-		if (!may_sleep) {
-			DPRINTK("Denying for uid %p locker_type %d, "
-			"hw_access %d, port %d, current_locker_type %d as "
-			"cannot sleep\n", uid, locker_type, hw_access, port_no,
-			hd->current_locker_type);
-
-			if (hw_access)
-				++(hd->scsi_nonblocking_attempts);
-
-			break;
-		}
-
-		/* Core is locked and we're allowed to sleep, so wait to be
-		 * awoken when the core is unlocked
-		 */
-		for (;;) {
-			prepare_to_wait(hw_access ? &hd->scsi_wait_queue :
-						    &hd->fast_wait_queue,
-					&wait, TASK_UNINTERRUPTIBLE);
-			if (!hd->core_locked &&
-			    !(!hw_access && hd->scsi_nonblocking_attempts)) {
-				/* We're going to use variables that will have
-				 * been changed by the waker prior to clearing
-				 * core_locked so we need to ensure we see
-				 * changes to all those variables
-				 */
-				smp_rmb();
-				break;
-			}
-			if (time_after(jiffies, end)) {
-				printk(KERN_WARNING "__acquire_sata_core() "
-					"uid %p failing for port %d timed out, "
-					"locker_uid %p, h/w count %d, "
-					"d count %d, callback %p, hw_access %d, "
-					"core_locked %d, reentrant_port_no %d, "
-					"isr_callback %p, isr_arg %p\n", uid,
-					port_no, hd->locker_uid,
-					hd->hw_lock_count,
-					hd->direct_lock_count, callback,
-					hw_access, hd->core_locked,
-					hd->reentrant_port_no, hd->isr_callback,
-					hd->isr_arg);
-				timed_out = 1;
-				break;
-			}
-			spin_unlock_irqrestore(&hd->core_lock, flags);
-			if (!schedule_timeout(4*HZ)) {
-				printk(KERN_INFO "__acquire_sata_core() uid %p, "
-					"locker_uid %p, timed-out of "
-					"schedule(), checking overall timeout\n",
-					uid, hd->locker_uid);
-			}
-			spin_lock_irqsave(&hd->core_lock, flags);
-		}
-		finish_wait(hw_access ? &hd->scsi_wait_queue :
-					&hd->fast_wait_queue, &wait);
-	}
-
-	if (hw_access && acquired) {
-		if (hd->scsi_nonblocking_attempts)
-			hd->scsi_nonblocking_attempts = 0;
-
-		/* Wake any other SCSI/SATA waiters so they can get reentrant
-		 * access to the same port if appropriate. This is because if
-		 * the SATA core is locked by fast access, or SCSI/SATA access
-		 * to other port, then can have >1 SCSI/SATA waiters on the wait
-		 * list so want to give reentrant accessors a chance to get
-		 * access ASAP
-		 */
-		if (!list_empty(&hd->scsi_wait_queue.task_list))
-			wake_up(&hd->scsi_wait_queue);
-	}
-
-	DPRINTK("Leaving uid %p with acquired = %d, port %d, callback %p\n",
-		uid, acquired, port_no, callback);
-
-	spin_unlock_irqrestore(&hd->core_lock, flags);
-
-	return acquired;
-}
-
-int sata_core_has_fast_waiters(struct ata_host *ah)
-{
-	int has_waiters;
-	unsigned long flags;
-	struct sata_oxnas_host_priv *hd = ah->private_data;
-
-	spin_lock_irqsave(&hd->core_lock, flags);
-	has_waiters = !list_empty(&hd->fast_wait_queue.task_list);
-	spin_unlock_irqrestore(&hd->core_lock, flags);
-
-	return has_waiters;
-}
-EXPORT_SYMBOL(sata_core_has_fast_waiters);
-
-int sata_core_has_scsi_waiters(struct ata_host *ah)
-{
-	int has_waiters;
-	unsigned long flags;
-	struct sata_oxnas_host_priv *hd = ah->private_data;
-
-	spin_lock_irqsave(&hd->core_lock, flags);
-	has_waiters = hd->scsi_nonblocking_attempts ||
-		      !list_empty(&hd->scsi_wait_queue.task_list);
-	spin_unlock_irqrestore(&hd->core_lock, flags);
-
-	return has_waiters;
-}
-EXPORT_SYMBOL(sata_core_has_scsi_waiters);
-
-/*
- * ata_port operation to gain ownership of the SATA hardware prior to issuing
- * a command against a SATA host. Allows any number of users of the port against
- * which the lock was first acquired, thus enforcing that only one SATA core
- * port may be operated on at once.
- */
-static int sata_oxnas_acquire_hw(
-	struct ata_port *ap,
-	int may_sleep,
-	int timeout_jiffies)
-{
-	return __acquire_sata_core(ap->host, ap->port_no, NULL, 0, may_sleep,
-				   timeout_jiffies, 1, (void *)HW_LOCKER_UID,
-				   SATA_SCSI_STACK);
-}
-
-/*
- * operation to release ownership of the SATA hardware
- */
-static void sata_oxnas_release_hw(struct ata_port *ap)
-{
-	unsigned long flags;
-	int released = 0;
-	struct sata_oxnas_host_priv *hd = ap->host->private_data;
-
-	spin_lock_irqsave(&hd->core_lock, flags);
-
-	DPRINTK("Entered port_no = %d, h/w count %d, d count %d, "
-		"core locked = %d, reentrant_port_no = %d, isr_callback %p\n",
-		ap->port_no, hd->hw_lock_count, hd->direct_lock_count,
-		hd->core_locked, hd->reentrant_port_no, hd->isr_callback);
-
-	if (!hd->core_locked) {
-		/* Nobody holds the SATA lock */
-		printk(KERN_WARNING "Nobody holds SATA lock, port_no %d\n",
-		       ap->port_no);
-		released = 1;
-	} else if (!hd->hw_lock_count) {
-		/* SCSI/SATA has released without holding the lock */
-		printk(KERN_WARNING "SCSI/SATA does not hold SATA lock, "
-		       "port_no %d\n", ap->port_no);
-	} else {
-		/* Trap incorrect usage */
-		BUG_ON(hd->reentrant_port_no == -1);
-		BUG_ON(ap->port_no != hd->reentrant_port_no);
-		BUG_ON(hd->direct_lock_count);
-		BUG_ON(hd->current_locker_type != SATA_SCSI_STACK);
-
-		WARN(!hd->locker_uid || (hd->locker_uid != HW_LOCKER_UID),
-			"Invalid locker uid %p, h/w count %d, d count %d, "
-			"reentrant_port_no %d, core_locked %d, "
-			"isr_callback %p\n", hd->locker_uid, hd->hw_lock_count,
-			hd->direct_lock_count, hd->reentrant_port_no,
-			hd->core_locked, hd->isr_callback);
-
-		if (--(hd->hw_lock_count)) {
-			DPRINTK("Still nested port_no %d\n", ap->port_no);
-		} else {
-			DPRINTK("Release port_no %d\n", ap->port_no);
-			hd->reentrant_port_no = -1;
-			hd->isr_callback = NULL;
-			hd->current_locker_type = SATA_UNLOCKED;
-			hd->locker_uid = 0;
-			hd->core_locked = 0;
-			released = 1;
-			wake_up(!list_empty(&hd->scsi_wait_queue.task_list) ?
-						&hd->scsi_wait_queue :
-						&hd->fast_wait_queue);
-		}
-	}
-
-	DPRINTK("Leaving, port_no %d, count %d\n", ap->port_no,
-		hd->hw_lock_count);
-
-	spin_unlock_irqrestore(&hd->core_lock, flags);
-
-	/* CONFIG_SATA_OX820_DIRECT_HWRAID */
-	/*    if (released)
-	     ox820hwraid_restart_queue();
-	} */
-}
-
-static inline int sata_oxnas_is_host_frozen(struct ata_host *ah)
-{
-	struct sata_oxnas_host_priv *hd = ah->private_data;
-
-	smp_rmb();
-	return hd->port_in_eh || hd->port_frozen;
-}
-
-
-static inline u32 sata_oxnas_hostportbusy(struct ata_port *ap)
-{
-	struct sata_oxnas_host_priv *hd = ap->host->private_data;
-
-	return (ioread32(hd->port_base + SATA_COMMAND) & CMD_CORE_BUSY) ||
-	       (hd->n_ports > 1 &&
-		(ioread32(hd->port_base + PORT_SIZE + SATA_COMMAND) &
-		 CMD_CORE_BUSY));
-}
-
-static inline u32 sata_oxnas_hostdmabusy(struct ata_port *ap)
-{
-	struct sata_oxnas_port_priv *pd = ap->private_data;
-
-	return ioread32(pd->sgdma_base + SGDMA_STATUS) & SGDMA_BUSY;
-}
-
-
-/**
- * Turns on the cores clock and resets it
- */
-static void sata_oxnas_reset_core(struct ata_host *ah)
-{
-	struct sata_oxnas_host_priv *host_priv = ah->private_data;
-	int n;
-
-	DPRINTK("ENTER\n");
-	clk_prepare_enable(host_priv->clk);
-
-	reset_control_assert(host_priv->rst_sata);
-	reset_control_assert(host_priv->rst_link);
-	reset_control_assert(host_priv->rst_phy);
-
-	udelay(50);
-
-	/* un-reset the PHY, then Link and Controller */
-	reset_control_deassert(host_priv->rst_phy);
-	udelay(50);
-
-	reset_control_deassert(host_priv->rst_sata);
-	reset_control_deassert(host_priv->rst_link);
-	udelay(50);
-
-	workaround5458(ah);
-	/* tune for sata compatibility */
-	sata_oxnas_link_write(ah->ports[0], 0x60, 0x2988);
-
-	for (n = 0; n < host_priv->n_ports; n++) {
-		/* each port in turn */
-		sata_oxnas_link_write(ah->ports[n], 0x70, 0x55629);
-	}
-	udelay(50);
-}
-
-
-/**
- * Called after an identify device command has worked out what kind of device
- * is on the port
- *
- * @param port The port to configure
- * @param pdev The hardware associated with controlling the port
- */
-static void sata_oxnas_dev_config(struct ata_device *pdev)
-{
-	struct sata_oxnas_port_priv *pd = pdev->link->ap->private_data;
-	void __iomem *port_base = pd->port_base;
-	u32 reg;
-
-	DPRINTK("ENTER\n");
-	/* Set the bits to put the port into 28 or 48-bit node */
-	reg = ioread32(port_base + DRIVE_CONTROL);
-	reg &= ~3;
-	reg |= (pdev->flags & ATA_DFLAG_LBA48) ? DR_CON_48 : DR_CON_28;
-	iowrite32(reg, port_base + DRIVE_CONTROL);
-
-	/* if this is an ATA-6 disk, put port into ATA-5 auto translate mode */
-	if (pdev->flags & ATA_DFLAG_LBA48) {
-		reg = ioread32(port_base + PORT_CONTROL);
-		reg |= 2;
-		iowrite32(reg, port_base + PORT_CONTROL);
-	}
-}
-/**
- * called to write a taskfile into the ORB registers
- * @param ap hardware with the registers in
- * @param tf taskfile to write to the registers
- */
-static void sata_oxnas_tf_load(struct ata_port *ap,
-				const struct ata_taskfile *tf)
-{
-	u32 count = 0;
-	u32 Orb1 = 0;
-	u32 Orb2 = 0;
-	u32 Orb3 = 0;
-	u32 Orb4 = 0;
-	u32 Command_Reg;
-
-	struct sata_oxnas_port_priv *port_priv = ap->private_data;
-	void __iomem *port_base = port_priv->port_base;
-	unsigned int is_addr = tf->flags & ATA_TFLAG_ISADDR;
-
-	/* wait a maximum of 10ms for the core to be idle */
-	do {
-		Command_Reg = ioread32(port_base + SATA_COMMAND);
-		if (!(Command_Reg & CMD_CORE_BUSY))
-			break;
-		count++;
-		udelay(50);
-	} while (count < 200);
-
-	/* check if the ctl register has interrupts disabled or enabled and
-	 * modify the interrupt enable registers on the ata core as required */
-	if (tf->ctl & ATA_NIEN) {
-		/* interrupts disabled */
-		u32 mask = (COREINT_END << ap->port_no);
-
-		iowrite32(mask, port_priv->core_base + CORE_INT_DISABLE);
-		sata_oxnas_irq_clear(ap);
-	} else {
-		sata_oxnas_irq_on(ap);
-	}
-
-	Orb2 |= (tf->command) << 24;
-
-	/* write 48 or 28 bit tf parameters */
-	if (is_addr) {
-		/* set LBA bit as it's an address */
-		Orb1 |= (tf->device & ATA_LBA) << 24;
-
-		if (tf->flags & ATA_TFLAG_LBA48) {
-			Orb1 |= ATA_LBA << 24;
-			Orb2 |= (tf->hob_nsect) << 8;
-			Orb3 |= (tf->hob_lbal) << 24;
-			Orb4 |= (tf->hob_lbam) << 0;
-			Orb4 |= (tf->hob_lbah) << 8;
-			Orb4 |= (tf->hob_feature) << 16;
-		} else {
-			Orb3 |= (tf->device & 0xf) << 24;
-		}
-
-		/* write 28-bit lba */
-		Orb2 |= (tf->nsect) << 0;
-		Orb2 |= (tf->feature) << 16;
-		Orb3 |= (tf->lbal) << 0;
-		Orb3 |= (tf->lbam) << 8;
-		Orb3 |= (tf->lbah) << 16;
-		Orb4 |= (tf->ctl) << 24;
-	}
-
-	if (tf->flags & ATA_TFLAG_DEVICE)
-		Orb1 |= (tf->device) << 24;
-
-	ap->last_ctl = tf->ctl;
-
-	/* write values to registers */
-	iowrite32(Orb1, port_base + ORB1);
-	iowrite32(Orb2, port_base + ORB2);
-	iowrite32(Orb3, port_base + ORB3);
-	iowrite32(Orb4, port_base + ORB4);
-}
-
-
-void sata_oxnas_set_mode(struct ata_host *ah, u32 mode, u32 force)
-{
-	struct sata_oxnas_host_priv *host_priv = ah->private_data;
-	void __iomem *core_base = host_priv->core_base;
-
-	unsigned int *src;
-	void __iomem *dst;
-	unsigned int progmicrocode = 0;
-	unsigned int changeparameters = 0;
-
-	u32 previous_mode;
-
-	/* these micro-code programs _should_ include the version word */
-
-	/* JBOD */
-	static const unsigned int jbod[] = {
-		0x07B400AC, 0x0228A280, 0x00200001, 0x00204002, 0x00224001,
-		0x00EE0009, 0x00724901, 0x01A24903, 0x00E40009, 0x00224001,
-		0x00621120, 0x0183C908, 0x00E20005, 0x00718908, 0x0198A206,
-		0x00621124, 0x0183C908, 0x00E20046, 0x00621104, 0x0183C908,
-		0x00E20015, 0x00EE009D, 0x01A3E301, 0x00E2001B, 0x0183C900,
-		0x00E2001B, 0x00210001, 0x00EE0020, 0x01A3E302, 0x00E2009D,
-		0x0183C901, 0x00E2009D, 0x00210002, 0x0235D700, 0x0208A204,
-		0x0071C908, 0x000F8207, 0x000FC207, 0x0071C920, 0x000F8507,
-		0x000FC507, 0x0228A240, 0x02269A40, 0x00094004, 0x00621104,
-		0x0180C908, 0x00E40031, 0x00621112, 0x01A3C801, 0x00E2002B,
-		0x00294000, 0x0228A220, 0x01A69ABF, 0x002F8000, 0x002FC000,
-		0x0198A204, 0x0001C022, 0x01B1A220, 0x0001C106, 0x00088007,
-		0x0183C903, 0x00E2009D, 0x0228A220, 0x0071890C, 0x0208A206,
-		0x0198A206, 0x0001C022, 0x01B1A220, 0x0001C106, 0x00088007,
-		0x00EE009D, 0x00621104, 0x0183C908, 0x00E2004A, 0x00EE009D,
-		0x01A3C901, 0x00E20050, 0x0021E7FF, 0x0183E007, 0x00E2009D,
-		0x00EE0054, 0x0061600B, 0x0021E7FF, 0x0183C507, 0x00E2009D,
-		0x01A3E301, 0x00E2005A, 0x0183C900, 0x00E2005A, 0x00210001,
-		0x00EE005F, 0x01A3E302, 0x00E20005, 0x0183C901, 0x00E20005,
-		0x00210002, 0x0235D700, 0x0208A204, 0x000F8109, 0x000FC109,
-		0x0071C918, 0x000F8407, 0x000FC407, 0x0001C022, 0x01A1A2BF,
-		0x0001C106, 0x00088007, 0x02269A40, 0x00094004, 0x00621112,
-		0x01A3C801, 0x00E4007F, 0x00621104, 0x0180C908, 0x00E4008D,
-		0x00621128, 0x0183C908, 0x00E2006C, 0x01A3C901, 0x00E2007B,
-		0x0021E7FF, 0x0183E007, 0x00E2007F, 0x00EE006C, 0x0061600B,
-		0x0021E7FF, 0x0183C507, 0x00E4006C, 0x00621111, 0x01A3C801,
-		0x00E2007F, 0x00621110, 0x01A3C801, 0x00E20082, 0x0228A220,
-		0x00621119, 0x01A3C801, 0x00E20086, 0x0001C022, 0x01B1A220,
-		0x0001C106, 0x00088007, 0x0198A204, 0x00294000, 0x01A69ABF,
-		0x002F8000, 0x002FC000, 0x0183C903, 0x00E20005, 0x0228A220,
-		0x0071890C, 0x0208A206, 0x0198A206, 0x0001C022, 0x01B1A220,
-		0x0001C106, 0x00088007, 0x00EE009D, 0x00621128, 0x0183C908,
-		0x00E20005, 0x00621104, 0x0183C908, 0x00E200A6, 0x0062111C,
-		0x0183C908, 0x00E20005, 0x0071890C, 0x0208A206, 0x0198A206,
-		0x00718908, 0x0208A206, 0x00EE0005, ~0
-	};
-
-	/* Bi-Modal RAID-0/1 */
-	static const unsigned int raid[] = {
-		0x00F20145, 0x00EE20FA, 0x00EE20A7, 0x0001C009, 0x00EE0004,
-		0x00220000, 0x0001000B, 0x037003FF, 0x00700018, 0x037003FE,
-		0x037043FD, 0x00704118, 0x037043FC, 0x01A3D240, 0x00E20017,
-		0x00B3C235, 0x00E40018, 0x0093C104, 0x00E80014, 0x0093C004,
-		0x00E80017, 0x01020000, 0x00274020, 0x00EE0083, 0x0080C904,
-		0x0093C104, 0x00EA0020, 0x0093C103, 0x00EC001F, 0x00220002,
-		0x00924104, 0x0005C009, 0x00EE0058, 0x0093CF04, 0x00E80026,
-		0x00900F01, 0x00600001, 0x00910400, 0x00EE0058, 0x00601604,
-		0x01A00003, 0x00E2002C, 0x01018000, 0x00274040, 0x00EE0083,
-		0x0093CF03, 0x00EC0031, 0x00220003, 0x00924F04, 0x0005C009,
-		0x00810104, 0x00B3C235, 0x00E20037, 0x0022C000, 0x00218210,
-		0x00EE0039, 0x0022C001, 0x00218200, 0x00600401, 0x00A04901,
-		0x00604101, 0x01A0C401, 0x00E20040, 0x00216202, 0x00EE0041,
-		0x00216101, 0x02018506, 0x00EE2141, 0x00904901, 0x00E20049,
-		0x00A00401, 0x00600001, 0x02E0C301, 0x00EE2141, 0x00216303,
-		0x037003EE, 0x01A3C001, 0x00E40105, 0x00250080, 0x00204000,
-		0x002042F1, 0x0004C001, 0x00230001, 0x00100006, 0x02C18605,
-		0x00100006, 0x01A3D502, 0x00E20055, 0x00EE0053, 0x00004009,
-		0x00000004, 0x00B3C235, 0x00E40062, 0x0022C001, 0x0020C000,
-		0x00EE2141, 0x0020C001, 0x00EE2141, 0x00EE006B, 0x0022C000,
-		0x0060D207, 0x00EE2141, 0x00B3C242, 0x00E20069, 0x01A3D601,
-		0x00E2006E, 0x02E0C301, 0x00EE2141, 0x00230001, 0x00301303,
-		0x00EE007B, 0x00218210, 0x01A3C301, 0x00E20073, 0x00216202,
-		0x00EE0074, 0x00216101, 0x02018506, 0x00214000, 0x037003EE,
-		0x01A3C001, 0x00E40108, 0x00230001, 0x00100006, 0x00250080,
-		0x00204000, 0x002042F1, 0x0004C001, 0x00EE007F, 0x0024C000,
-		0x01A3D1F0, 0x00E20088, 0x00230001, 0x00300000, 0x01A3D202,
-		0x00E20085, 0x00EE00A5, 0x00B3C800, 0x00E20096, 0x00218000,
-		0x00924709, 0x0005C009, 0x00B20802, 0x00E40093, 0x037103FD,
-		0x00710418, 0x037103FC, 0x00EE0006, 0x00220000, 0x0001000F,
-		0x00EE0006, 0x00800B0C, 0x00B00001, 0x00204000, 0x00208550,
-		0x00208440, 0x002083E0, 0x00208200, 0x00208100, 0x01008000,
-		0x037083EE, 0x02008212, 0x02008216, 0x01A3C201, 0x00E400A5,
-		0x0100C000, 0x00EE20FA, 0x02800000, 0x00208000, 0x00B24C00,
-		0x00E400AD, 0x00224001, 0x00724910, 0x0005C009, 0x00B3CDC4,
-		0x00E200D5, 0x00B3CD29, 0x00E200D5, 0x00B3CD20, 0x00E200D5,
-		0x00B3CD24, 0x00E200D5, 0x00B3CDC5, 0x00E200D2, 0x00B3CD39,
-		0x00E200D2, 0x00B3CD30, 0x00E200D2, 0x00B3CD34, 0x00E200D2,
-		0x00B3CDCA, 0x00E200CF, 0x00B3CD35, 0x00E200CF, 0x00B3CDC8,
-		0x00E200CC, 0x00B3CD25, 0x00E200CC, 0x00B3CD40, 0x00E200CB,
-		0x00B3CD42, 0x00E200CB, 0x01018000, 0x00EE0083, 0x0025C000,
-		0x036083EE, 0x0000800D, 0x00EE00D8, 0x036083EE, 0x00208035,
-		0x00EE00DA, 0x036083EE, 0x00208035, 0x00EE00DA, 0x00208007,
-		0x036083EE, 0x00208025, 0x036083EF, 0x02400000, 0x01A3D208,
-		0x00E200D8, 0x0067120A, 0x0021C000, 0x0021C224, 0x00220000,
-		0x00404B1C, 0x00600105, 0x00800007, 0x0020C00E, 0x00214000,
-		0x01004000, 0x01A0411F, 0x00404E01, 0x01A3C101, 0x00E200F1,
-		0x00B20800, 0x00E400D8, 0x00220001, 0x0080490B, 0x00B04101,
-		0x0040411C, 0x00EE00E1, 0x02269A01, 0x01020000, 0x02275D80,
-		0x01A3D202, 0x00E200F4, 0x01B75D80, 0x01030000, 0x01B69A01,
-		0x00EE00D8, 0x01A3D204, 0x00E40104, 0x00224000, 0x0020C00E,
-		0x0020001E, 0x00214000, 0x01004000, 0x0212490E, 0x00214001,
-		0x01004000, 0x02400000, 0x00B3D702, 0x00E80112, 0x00EE010E,
-		0x00B3D702, 0x00E80112, 0x00B3D702, 0x00E4010E, 0x00230001,
-		0x00EE0140, 0x00200005, 0x036003EE, 0x00204001, 0x00EE0116,
-		0x00230001, 0x00100006, 0x02C18605, 0x00100006, 0x01A3D1F0,
-		0x00E40083, 0x037003EE, 0x01A3C002, 0x00E20121, 0x0020A300,
-		0x0183D102, 0x00E20124, 0x037003EE, 0x01A00005, 0x036003EE,
-		0x01A0910F, 0x00B3C20F, 0x00E2012F, 0x01A3D502, 0x00E20116,
-		0x01A3C002, 0x00E20116, 0x00B3D702, 0x00E4012C, 0x00300000,
-		0x00EE011F, 0x02C18605, 0x00100006, 0x00EE0116, 0x01A3D1F0,
-		0x00E40083, 0x037003EE, 0x01A3C004, 0x00E20088, 0x00200003,
-		0x036003EE, 0x01A3D502, 0x00E20136, 0x00230001, 0x00B3C101,
-		0x00E4012C, 0x00100006, 0x02C18605, 0x00100006, 0x00204000,
-		0x00EE0116, 0x00100006, 0x01A3D1F0, 0x00E40083, 0x01000000,
-		0x02400000, ~0
-	};
-
-	DPRINTK("ENTER: mode:%d, force:%d\n", mode, force);
-
-	if (force)
-		previous_mode = UNKNOWN_MODE;
-	else
-		previous_mode = host_priv->current_ucode;
-
-	if (mode == previous_mode)
-		return;
-
-	host_priv->current_ucode = mode;
-
-	/* decide what needs to be done using the STD in my logbook */
-	switch (previous_mode) {
-	case OXNASSATA_RAID1:
-		switch (mode) {
-		case OXNASSATA_RAID0:
-			changeparameters = 1;
-			break;
-		case OXNASSATA_NOTRAID:
-			changeparameters = 1;
-			progmicrocode = 1;
-			break;
-		}
-		break;
-	case OXNASSATA_RAID0:
-		switch (mode) {
-		case OXNASSATA_RAID1:
-			changeparameters = 1;
-			break;
-		case OXNASSATA_NOTRAID:
-			changeparameters = 1;
-			progmicrocode = 1;
-			break;
-		}
-		break;
-	case OXNASSATA_NOTRAID:
-		switch (mode) {
-		case OXNASSATA_RAID0:
-		case OXNASSATA_RAID1:
-			changeparameters = 1;
-			progmicrocode = 1;
-			break;
-		}
-		break;
-	case UNKNOWN_MODE:
-		changeparameters = 1;
-		progmicrocode = 1;
-		break;
-	}
-
-	/* no need to reprogram everything if already in the right mode */
-	if (progmicrocode) {
-		/* reset micro-code processor */
-		iowrite32(1, core_base + PROC_RESET);
-		wmb();
-
-		/* select micro-code */
-		switch (mode) {
-		case OXNASSATA_RAID1:
-		case OXNASSATA_RAID0:
-			VPRINTK("Loading RAID micro-code\n");
-			src = (unsigned int *)&raid[1];
-			break;
-		case OXNASSATA_NOTRAID:
-			VPRINTK("Loading JBOD micro-code\n");
-			src = (unsigned int *)&jbod[1];
-			break;
-		default:
-			BUG();
-			break;
-		}
-
-		/* load micro code */
-		dst = core_base + UCODE_STORE;
-		while (*src != ~0) {
-			iowrite32(*src, dst);
-			src++;
-			dst += sizeof(*src);
-		}
-		wmb();
-	}
-
-	if (changeparameters) {
-		u32 reg;
-		/* set other mode dependent flags */
-		switch (mode) {
-		case OXNASSATA_RAID1:
-			/* clear JBOD mode */
-			reg = ioread32(core_base + DATA_PLANE_CTRL);
-			reg |= DPC_JBOD_UCODE;
-			reg &= ~DPC_FIS_SWCH;
-			iowrite32(reg, core_base + DATA_PLANE_CTRL);
-			wmb();
-
-			/* set the hardware up for RAID-1 */
-			iowrite32(0, core_base + RAID_WP_BOT_LOW);
-			iowrite32(0, core_base + RAID_WP_BOT_HIGH);
-			iowrite32(0xffffffff, core_base + RAID_WP_TOP_LOW);
-			iowrite32(0x7fffffff, core_base + RAID_WP_TOP_HIGH);
-			iowrite32(0, core_base + RAID_SIZE_LOW);
-			iowrite32(0, core_base + RAID_SIZE_HIGH);
-			wmb();
-			break;
-		case OXNASSATA_RAID0:
-			/* clear JBOD mode */
-			reg = ioread32(core_base + DATA_PLANE_CTRL);
-			reg |= DPC_JBOD_UCODE;
-			reg &= ~DPC_FIS_SWCH;
-			iowrite32(reg, core_base + DATA_PLANE_CTRL);
-			wmb();
-
-			/* set the hardware up for RAID-1 */
-			iowrite32(0, core_base + RAID_WP_BOT_LOW);
-			iowrite32(0, core_base + RAID_WP_BOT_HIGH);
-			iowrite32(0xffffffff, core_base + RAID_WP_TOP_LOW);
-			iowrite32(0x7fffffff, core_base + RAID_WP_TOP_HIGH);
-			iowrite32(0xffffffff, core_base + RAID_SIZE_LOW);
-			iowrite32(0x7fffffff, core_base + RAID_SIZE_HIGH);
-			wmb();
-			break;
-		case OXNASSATA_NOTRAID:
-			/* enable jbod mode */
-			reg = ioread32(core_base + DATA_PLANE_CTRL);
-			reg &= ~DPC_JBOD_UCODE;
-			reg &= ~DPC_FIS_SWCH;
-			iowrite32(reg, core_base + DATA_PLANE_CTRL);
-			wmb();
-
-			/* start micro-code processor*/
-			iowrite32(1, core_base + PROC_START);
-			break;
-		default:
-			reg = ioread32(core_base + DATA_PLANE_CTRL);
-			reg |= DPC_JBOD_UCODE;
-			reg &= ~DPC_FIS_SWCH;
-			iowrite32(reg, core_base + DATA_PLANE_CTRL);
-			wmb();
-			break;
-		}
-	}
-}
-
-/**
- * sends a sync-escape if there is a link present
- */
-static inline void sata_oxnas_send_sync_escape(struct ata_port *ap)
-{
-	struct sata_oxnas_port_priv *pd = ap->private_data;
-	u32 reg;
-
-	/* read the SSTATUS register and only send a sync escape if there is a
-	* link active */
-	if ((sata_oxnas_link_read(ap, 0x20) & 3) == 3) {
-		reg = ioread32(pd->port_base + SATA_COMMAND);
-		reg &= ~SATA_OPCODE_MASK;
-		reg |= CMD_SYNC_ESCAPE;
-		iowrite32(reg, pd->port_base + SATA_COMMAND);
-	}
-}
-
-/* clears errors */
-static inline void sata_oxnas_clear_CS_error(struct ata_port *ap)
-{
-	struct sata_oxnas_port_priv *pd = ap->private_data;
-	u32 *base = pd->port_base;
-	u32 reg;
-
-	reg = ioread32(base + SATA_CONTROL);
-	reg &= SATA_CTL_ERR_MASK;
-	iowrite32(reg, base + SATA_CONTROL);
-}
-
-static inline void sata_oxnas_reset_sgdma(struct ata_port *ap)
-{
-	struct sata_oxnas_port_priv *pd = ap->private_data;
-
-	iowrite32(SGDMA_RESETS_CTRL, pd->sgdma_base + SGDMA_RESETS);
-}
-
-static inline void sata_oxnas_reset_dma(struct ata_port *ap, int assert)
-{
-	struct sata_oxnas_port_priv *pd = ap->private_data;
-	u32 reg;
-
-	reg = ioread32(pd->dmactl_base + DMA_CONTROL);
-	if (assert)
-		reg |= DMA_CONTROL_RESET;
-	else
-		reg &= ~DMA_CONTROL_RESET;
-
-	iowrite32(reg, pd->dmactl_base + DMA_CONTROL);
-};
-
-/**
- * Clears the error caused by the core's registers being accessed when the
- * core is busy.
- */
-static inline void sata_oxnas_clear_reg_access_error(struct ata_port *ap)
-{
-	struct sata_oxnas_port_priv *pd = ap->private_data;
-	u32 *base = pd->port_base;
-	u32 reg;
-
-	reg = ioread32(base + INT_STATUS);
-
-	DPRINTK("ENTER\n");
-	if (reg & INT_REG_ACCESS_ERR) {
-		DPRINTK("clearing register access error on port %d\n",
-			ap->port_no);
-		iowrite32(INT_REG_ACCESS_ERR, base + INT_STATUS);
-	}
-	reg = ioread32(base + INT_STATUS);
-	if (reg & INT_REG_ACCESS_ERR)
-		DPRINTK("register access error didn't clear\n");
-}
-
-static inline void sata_oxnas_clear_sctl_error(struct ata_port *ap)
-{
-	struct sata_oxnas_port_priv *pd = ap->private_data;
-	u32 *base = pd->port_base;
-	u32 reg;
-
-	reg = ioread32(base + SATA_CONTROL);
-	reg |= SCTL_CLR_ERR;
-	iowrite32(reg, base + SATA_CONTROL);
-}
-
-static inline void sata_oxnas_clear_raid_error(struct ata_host *ah)
-{
-	return;
-};
-
-/**
- * Clean up all the state machines in the sata core.
- * @return post cleanup action required
- */
-static int sata_oxnas_cleanup(struct ata_host *ah)
-{
-	struct sata_oxnas_host_priv *hd = ah->private_data;
-	int actions_required = 0;
-	int n;
-
-	printk(KERN_INFO "sata_oxnas: resetting SATA core\n");
-	/* core not recovering, reset it */
-	mdelay(5);
-	sata_oxnas_reset_core(ah);
-	mdelay(5);
-	actions_required |= OXNAS_SATA_REINIT;
-	/* Perform any SATA core re-initialisation after reset post reset init
-	 * needs to be called for both ports as there's one reset for both
-	 * ports */
-	for (n = 0; n < hd->n_ports; n++)
-		sata_oxnas_post_reset_init(ah->ports[n]);
-
-
-	return actions_required;
-}
-
-/**
- *  ata_qc_new - Request an available ATA command, for queueing
- *  @ap: Port associated with device @dev
- *  @return non zero will refuse a new command, zero will may grant on subject
- *          to conditions elsewhere.
- *
- */
-static int sata_oxnas_qc_new(struct ata_port *ap)
-{
-	struct sata_oxnas_host_priv *hd = ap->host->private_data;
-
-	DPRINTK("port %d\n", ap->port_no);
-	smp_rmb();
-	if (hd->port_frozen || hd->port_in_eh)
-		return 1;
-	else
-		return !sata_oxnas_acquire_hw(ap, 0, 0);
-}
-
-/**
- * releases the lock on the port the command used
- */
-static void sata_oxnas_qc_free(struct ata_queued_cmd *qc)
-{
-	DPRINTK("\n");
-	sata_oxnas_release_hw(qc->ap);
-}
-
-static void sata_oxnas_freeze(struct ata_port *ap)
-{
-	struct sata_oxnas_host_priv *hd = ap->host->private_data;
-
-	DPRINTK("\n");
-	hd->port_frozen |= BIT(ap->port_no);
-	smp_wmb();
-}
-
-static void sata_oxnas_thaw(struct ata_port *ap)
-{
-	struct sata_oxnas_host_priv *hd = ap->host->private_data;
-
-	DPRINTK("\n");
-	hd->port_frozen &= ~BIT(ap->port_no);
-	smp_wmb();
-}
-
-void sata_oxnas_freeze_host(struct ata_port *ap)
-{
-	struct sata_oxnas_host_priv *hd = ap->host->private_data;
-
-	DPRINTK("ENTER\n");
-	hd->port_in_eh |= BIT(ap->port_no);
-	smp_wmb();
-}
-
-void sata_oxnas_thaw_host(struct ata_port *ap)
-{
-	struct sata_oxnas_host_priv *hd = ap->host->private_data;
-
-	DPRINTK("ENTER\n");
-	hd->port_in_eh &= ~BIT(ap->port_no);
-	smp_wmb();
-}
-
-static void sata_oxnas_post_internal_cmd(struct ata_queued_cmd *qc)
-{
-	DPRINTK("ENTER\n");
-	/* If the core is busy here, make it idle */
-	if (qc->flags & ATA_QCFLAG_FAILED)
-		sata_oxnas_cleanup(qc->ap->host);
-}
-
-
-/**
- * turn on the interrupts
- *
- * @param ap Hardware with the registers in
- */
-static void sata_oxnas_irq_on(struct ata_port *ap)
-{
-	struct sata_oxnas_port_priv *pd = ap->private_data;
-	u32 mask = (COREINT_END << ap->port_no);
-
-	/* Clear pending interrupts */
-	iowrite32(~0, pd->port_base + INT_CLEAR);
-	iowrite32(mask, pd->core_base + CORE_INT_STATUS);
-	wmb();
-
-	/* enable End of command interrupt */
-	iowrite32(INT_WANT, pd->port_base + INT_ENABLE);
-	iowrite32(mask, pd->core_base + CORE_INT_ENABLE);
-}
-
-
-/** @return true if the port has a cable connected */
-int sata_oxnas_check_link(struct ata_port *ap)
-{
-	int reg;
-
-	sata_oxnas_scr_read_port(ap, SCR_STATUS, &reg);
-	/* Check for the cable present indicated by SCR status bit-0 set */
-	return reg & 0x1;
-}
-
-/**
- *	ata_std_postreset - standard postreset callback
- *	@link: the target ata_link
- *	@classes: classes of attached devices
- *
- *	This function is invoked after a successful reset. Note that
- *	the device might have been reset more than once using
- *	different reset methods before postreset is invoked.
- *
- *	LOCKING:
- *	Kernel thread context (may sleep)
- */
-static void sata_oxnas_postreset(struct ata_link *link, unsigned int *classes)
-{
-	struct ata_port *ap = link->ap;
-	struct sata_oxnas_host_priv *hd = ap->host->private_data;
-
-	unsigned int dev;
-
-	DPRINTK("ENTER\n");
-	ata_std_postreset(link, classes);
-
-	/* turn on phy error detection by removing the masks */
-	sata_oxnas_link_write(ap->host->ports[0], 0x0c, 0x30003);
-	if (hd->n_ports > 1)
-		sata_oxnas_link_write(ap->host->ports[1], 0x0c, 0x30003);
-
-	/* bail out if no device is present */
-	if (classes[0] == ATA_DEV_NONE && classes[1] == ATA_DEV_NONE) {
-		DPRINTK("EXIT, no device\n");
-		return;
-	}
-
-	/* go through all the devices and configure them */
-	for (dev = 0; dev < ATA_MAX_DEVICES; ++dev) {
-		if (ap->link.device[dev].class == ATA_DEV_ATA)
-			sata_oxnas_dev_config(&(ap->link.device[dev]));
-	}
-
-	DPRINTK("EXIT\n");
-}
-
-/**
- * Called to read the hardware registers / DMA buffers, to
- * obtain the current set of taskfile register values.
- * @param ap hardware with the registers in
- * @param tf taskfile to read the registers into
- */
-static void sata_oxnas_tf_read(struct ata_port *ap, struct ata_taskfile *tf)
-{
-	struct sata_oxnas_port_priv *port_priv = ap->private_data;
-	void __iomem *port_base = port_priv->port_base;
-	/* read the orb registers */
-	u32 Orb1 = ioread32(port_base + ORB1);
-	u32 Orb2 = ioread32(port_base + ORB2);
-	u32 Orb3 = ioread32(port_base + ORB3);
-	u32 Orb4 = ioread32(port_base + ORB4);
-
-	/* read common 28/48 bit tf parameters */
-	tf->device = (Orb1 >> 24);
-	tf->nsect = (Orb2 >> 0);
-	tf->feature = (Orb2 >> 16);
-	tf->command = sata_oxnas_check_status(ap);
-
-	/* read 48 or 28 bit tf parameters */
-	if (tf->flags & ATA_TFLAG_LBA48) {
-		tf->hob_nsect = (Orb2 >> 8);
-		tf->lbal = (Orb3 >> 0);
-		tf->lbam = (Orb3 >> 8);
-		tf->lbah = (Orb3 >> 16);
-		tf->hob_lbal = (Orb3 >> 24);
-		tf->hob_lbam = (Orb4 >> 0);
-		tf->hob_lbah = (Orb4 >> 8);
-		/* feature ext and control are write only */
-	} else {
-		/* read 28-bit lba */
-		tf->lbal = (Orb3 >> 0);
-		tf->lbam = (Orb3 >> 8);
-		tf->lbah = (Orb3 >> 16);
-	}
-}
-
-/**
- * Read a result task-file from the sata core registers.
- */
-static bool sata_oxnas_qc_fill_rtf(struct ata_queued_cmd *qc)
-{
-	/* Read the most recently received FIS from the SATA core ORB registers
-	 and convert to an ATA taskfile */
-	sata_oxnas_tf_read(qc->ap, &qc->result_tf);
-	return true;
-}
-
-/**
- * Reads the Status ATA shadow register from hardware.
- *
- * @return The status register
- */
-static u8 sata_oxnas_check_status(struct ata_port *ap)
-{
-	u32 Reg;
-	u8 status;
-	struct sata_oxnas_port_priv *port_priv = ap->private_data;
-	void __iomem *port_base = port_priv->port_base;
-
-	/* read byte 3 of Orb2 register */
-	status = ioread32(port_base + ORB2) >> 24;
-
-	/* check for the drive going missing indicated by SCR status bits
-	 * 0-3 = 0 */
-	sata_oxnas_scr_read_port(ap, SCR_STATUS, &Reg);
-
-	if (!(Reg & 0x1)) {
-		status |= ATA_DF;
-		status |= ATA_ERR;
-	}
-
-	return status;
-}
-
-static inline void sata_oxnas_reset_ucode(struct ata_host *ah, int force,
-					  int no_microcode)
-{
-	struct sata_oxnas_host_priv *hd = ah->private_data;
-
-	DPRINTK("ENTER\n");
-	if (no_microcode) {
-		u32 reg;
-
-		sata_oxnas_set_mode(ah, UNKNOWN_MODE, force);
-		reg = ioread32(hd->core_base + DEVICE_CONTROL);
-		reg |= DEVICE_CONTROL_ATA_ERR_OVERRIDE;
-		iowrite32(reg, hd->core_base + DEVICE_CONTROL);
-	} else {
-		/* JBOD uCode */
-		sata_oxnas_set_mode(ah, OXNASSATA_NOTRAID, force);
-		/* Turn the work around off as it may have been left on by any
-		 * HW-RAID code that we've been working with */
-		iowrite32(0x0, hd->core_base + PORT_ERROR_MASK);
-	}
-}
-
-/**
- * Prepare as much as possible for a command without involving anything that is
- * shared between ports.
- */
-static void sata_oxnas_qc_prep(struct ata_queued_cmd *qc)
-{
-	struct sata_oxnas_port_priv *pd;
-	int port_no = qc->ap->port_no;
-
-	/* if the port's not connected, complete now with an error */
-	if (!sata_oxnas_check_link(qc->ap)) {
-		ata_port_err(qc->ap,
-			"port %d not connected completing with error\n",
-			port_no);
-		qc->err_mask |= AC_ERR_ATA_BUS;
-		ata_qc_complete(qc);
-	}
-
-	sata_oxnas_reset_ucode(qc->ap->host, 0, 0);
-
-	/* both pio and dma commands use dma */
-	if (ata_is_dma(qc->tf.protocol) || ata_is_pio(qc->tf.protocol)) {
-
-		/* program the scatterlist into the prd table */
-		ata_bmdma_qc_prep(qc);
-
-		/* point the sgdma controller at the dma request structure */
-		pd = qc->ap->private_data;
-
-		iowrite32(pd->sgdma_request_pa,
-				pd->sgdma_base + SGDMA_REQUESTPTR);
-
-		/* setup the request table */
-		if (port_no == 0) {
-			pd->sgdma_request->control =
-				(qc->dma_dir == DMA_FROM_DEVICE) ?
-					SGDMA_REQCTL0IN : SGDMA_REQCTL0OUT;
-		} else {
-			pd->sgdma_request->control =
-				(qc->dma_dir == DMA_FROM_DEVICE) ?
-					SGDMA_REQCTL1IN : SGDMA_REQCTL1OUT;
-		}
-		pd->sgdma_request->qualifier = SGDMA_REQQUAL;
-		pd->sgdma_request->src_pa = qc->ap->bmdma_prd_dma;
-		pd->sgdma_request->dst_pa = qc->ap->bmdma_prd_dma;
-		smp_wmb();
-
-		/* tell it to wait */
-		iowrite32(SGDMA_CONTROL_NOGO, pd->sgdma_base + SGDMA_CONTROL);
-	}
-}
-
-static int sata_oxnas_port_start(struct ata_port *ap)
-{
-	struct sata_oxnas_host_priv *host_priv = ap->host->private_data;
-	struct device *dev = ap->host->dev;
-	struct sata_oxnas_port_priv *pp;
-	void *mem;
-	dma_addr_t mem_dma;
-
-	DPRINTK("ENTER\n");
-
-	pp = kzalloc(sizeof(*pp), GFP_KERNEL);
-	if (!pp)
-		return -ENOMEM;
-
-	pp->port_base = host_priv->port_base +
-			(ap->port_no ? PORT_SIZE : 0);
-	pp->dmactl_base = host_priv->dmactl_base +
-			 (ap->port_no ? DMA_CORESIZE : 0);
-	pp->sgdma_base = host_priv->sgdma_base +
-			 (ap->port_no ? SGDMA_CORESIZE : 0);
-	pp->core_base = host_priv->core_base;
-
-	/* preallocated */
-	if (host_priv->dma_size >= SATA_OXNAS_DMA_SIZE * host_priv->n_ports) {
-		DPRINTK("using preallocated DMA\n");
-		mem_dma = host_priv->dma_base +
-				(ap->port_no ? SATA_OXNAS_DMA_SIZE : 0);
-		mem = ioremap(mem_dma, SATA_OXNAS_DMA_SIZE);
-	} else {
-		mem = dma_alloc_coherent(dev, SATA_OXNAS_DMA_SIZE, &mem_dma,
-					 GFP_KERNEL);
-	}
-	if (!mem)
-		goto err_ret;
-
-	pp->sgdma_request_pa = mem_dma;
-	pp->sgdma_request = mem;
-
-	ap->bmdma_prd_dma = mem_dma + sizeof(struct sgdma_request);
-	ap->bmdma_prd = mem + sizeof(struct sgdma_request);
-
-	ap->private_data = pp;
-
-	sata_oxnas_post_reset_init(ap);
-
-	return 0;
-
-err_ret:
-	kfree(pp);
-	return -ENOMEM;
-
-}
-
-static void sata_oxnas_port_stop(struct ata_port *ap)
-{
-	struct device *dev = ap->host->dev;
-	struct sata_oxnas_port_priv *pp = ap->private_data;
-	struct sata_oxnas_host_priv *host_priv = ap->host->private_data;
-
-	DPRINTK("ENTER\n");
-	ap->private_data = NULL;
-	if (host_priv->dma_size) {
-		iounmap(pp->sgdma_request);
-	} else {
-		dma_free_coherent(dev, SATA_OXNAS_DMA_SIZE,
-				  pp->sgdma_request, pp->sgdma_request_pa);
-	}
-
-	kfree(pp);
-}
-
-
-static void sata_oxnas_post_reset_init(struct ata_port *ap)
-{
-	uint dev;
-
-	/* force to load u-code only once after reset */
-	sata_oxnas_reset_ucode(ap->host, !ap->port_no, 0);
-
-	/* turn on phy error detection by removing the masks */
-	sata_oxnas_link_write(ap, 0x0C, 0x30003);
-
-	/* enable hotplug event detection */
-	sata_oxnas_scr_write_port(ap, SCR_ERROR, ~0);
-	sata_oxnas_scr_write_port(ap, SERROR_IRQ_MASK, 0x03feffff);
-	sata_oxnas_scr_write_port(ap, SCR_ACTIVE, ~0 & ~(1 << 26) & ~(1 << 16));
-
-	/* enable interrupts for ports */
-	sata_oxnas_irq_on(ap);
-
-	/* go through all the devices and configure them */
-	for (dev = 0; dev < ATA_MAX_DEVICES; ++dev) {
-		if (ap->link.device[dev].class == ATA_DEV_ATA) {
-			sata_std_hardreset(&ap->link, NULL, jiffies + HZ);
-			sata_oxnas_dev_config(&(ap->link.device[dev]));
-		}
-	}
-
-	/* clean up any remaining errors */
-	sata_oxnas_scr_write_port(ap, SCR_ERROR, ~0);
-	VPRINTK("done\n");
-}
-
-/**
- * host_stop() is called when the rmmod or hot unplug process begins. The
- * hook must stop all hardware interrupts, DMA engines, etc.
- *
- * @param ap hardware with the registers in
- */
-static void sata_oxnas_host_stop(struct ata_host *host_set)
-{
-	DPRINTK("\n");
-}
-
-
-#define ERROR_HW_ACQUIRE_TIMEOUT_JIFFIES (10 * HZ)
-static void sata_oxnas_error_handler(struct ata_port *ap)
-{
-	DPRINTK("Enter port_no %d\n", ap->port_no);
-	sata_oxnas_freeze_host(ap);
-
-	/* If the core is busy here, make it idle */
-	sata_oxnas_cleanup(ap->host);
-
-	ata_std_error_handler(ap);
-
-	sata_oxnas_thaw_host(ap);
-}
-
-static int sata_oxnas_softreset(struct ata_link *link, unsigned int *class,
-				 unsigned long deadline)
-{
-	struct ata_port *ap = link->ap;
-	struct sata_oxnas_port_priv *pd = ap->private_data;
-	void __iomem *port_base = pd->port_base;
-	int rc;
-
-	struct ata_taskfile tf;
-	u32 Command_Reg;
-
-	DPRINTK("ENTER\n");
-
-	port_base = pd->port_base;
-
-	if (ata_link_offline(link)) {
-		DPRINTK("PHY reports no device\n");
-		*class = ATA_DEV_NONE;
-		goto out;
-	}
-
-	/* write value to register */
-	iowrite32(0, port_base + ORB1);
-	iowrite32(0, port_base + ORB2);
-	iowrite32(0, port_base + ORB3);
-	iowrite32((ap->ctl) << 24, port_base + ORB4);
-
-	/* command the core to send a control FIS */
-	Command_Reg = ioread32(port_base + SATA_COMMAND);
-	Command_Reg &= ~SATA_OPCODE_MASK;
-	Command_Reg |= CMD_WRITE_TO_ORB_REGS_NO_COMMAND;
-	iowrite32(Command_Reg, port_base + SATA_COMMAND);
-	udelay(20);	/* FIXME: flush */
-
-	/* write value to register */
-	iowrite32((ap->ctl | ATA_SRST) << 24, port_base + ORB4);
-
-	/* command the core to send a control FIS */
-	Command_Reg &= ~SATA_OPCODE_MASK;
-	Command_Reg |= CMD_WRITE_TO_ORB_REGS_NO_COMMAND;
-	iowrite32(Command_Reg, port_base + SATA_COMMAND);
-	udelay(20);	/* FIXME: flush */
-
-	/* write value to register */
-	iowrite32((ap->ctl) << 24, port_base + ORB4);
-
-	/* command the core to send a control FIS */
-	Command_Reg &= ~SATA_OPCODE_MASK;
-	Command_Reg |= CMD_WRITE_TO_ORB_REGS_NO_COMMAND;
-	iowrite32(Command_Reg, port_base + SATA_COMMAND);
-
-	msleep(150);
-
-	rc = ata_sff_wait_ready(link, deadline);
-
-	/* if link is occupied, -ENODEV too is an error */
-	if (rc && (rc != -ENODEV || sata_scr_valid(link))) {
-		ata_link_printk(link, KERN_ERR, "SRST failed (errno=%d)\n", rc);
-		return rc;
-	}
-
-	/* determine by signature whether we have ATA or ATAPI devices */
-	sata_oxnas_tf_read(ap, &tf);
-	*class = ata_dev_classify(&tf);
-
-	if (*class == ATA_DEV_UNKNOWN)
-		*class = ATA_DEV_NONE;
-
-out:
-	DPRINTK("EXIT, class=%u\n", *class);
-	return 0;
-}
-
-
-int	sata_oxnas_init_controller(struct ata_host *host)
-{
-	return 0;
-}
-
-/**
- * Ref bug-6320
- *
- * This code is a work around for a DMA hardware bug that will repeat the
- * penultimate 8-bytes on some reads. This code will check that the amount
- * of data transferred is a multiple of 512 bytes, if not the in it will
- * fetch the correct data from a buffer in the SATA core and copy it into
- * memory.
- *
- * @param port SATA port to check and if necessary, correct.
- */
-static int sata_oxnas_bug_6320_detect(struct ata_port *ap)
-{
-	struct sata_oxnas_port_priv *pd = ap->private_data;
-	void __iomem *core_base = pd->core_base;
-	int is_read;
-	int quads_transferred;
-	int remainder;
-	int sector_quads_remaining;
-	int bug_present = 0;
-
-	/* Only want to apply fix to reads */
-	is_read = !(ioread32(core_base + DM_DBG1) & (ap->port_no ?
-			BIT(CORE_PORT1_DATA_DIR_BIT) :
-				BIT(CORE_PORT0_DATA_DIR_BIT)));
-
-	/* Check for an incomplete transfer, i.e. not a multiple of 512 bytes
-	   transferred (datacount_port register counts quads transferred) */
-	quads_transferred =
-		ioread32(core_base + (ap->port_no ?
-					DATACOUNT_PORT1 : DATACOUNT_PORT0));
-
-	remainder = quads_transferred & 0x7f;
-	sector_quads_remaining = remainder ? (0x80 - remainder) : 0;
-
-	if (is_read && (sector_quads_remaining == 2)) {
-		bug_present = 1;
-	} else if (sector_quads_remaining) {
-		if (is_read) {
-			ata_port_warn(ap, "SATA read fixup cannot deal with "
-				"%d quads remaining\n",
-				sector_quads_remaining);
-		} else {
-			ata_port_warn(ap, "SATA write fixup of %d quads "
-				"remaining not supported\n",
-				sector_quads_remaining);
-		}
-	}
-
-	return bug_present;
-}
-
-/* This port done an interrupt */
-static void sata_oxnas_port_irq(struct ata_port *ap, int force_error)
-{
-	struct ata_queued_cmd *qc;
-	struct sata_oxnas_port_priv *pd = ap->private_data;
-	void __iomem *port_base = pd->port_base;
-
-	u32 int_status;
-	unsigned long flags = 0;
-
-	DPRINTK("ENTER port %d irqstatus %x\n", ap->port_no,
-		ioread32(port_base + INT_STATUS));
-
-	if (ap->qc_active & (1 << ATA_TAG_INTERNAL)) {
-			qc = ata_qc_from_tag(ap, ATA_TAG_INTERNAL);
-			DPRINTK("completing non-ncq cmd\n");
-
-			if (qc)
-				ata_qc_complete(qc);
-
-			return;
-	}
-
-	qc = ata_qc_from_tag(ap, ap->link.active_tag);
-
-
-	/* record the port's interrupt */
-	int_status = ioread32(port_base + INT_STATUS);
-
-	/* If there's no command associated with this IRQ, ignore it. We may get
-	 * spurious interrupts when cleaning-up after a failed command, ignore
-	 * these too. */
-	if (likely(qc)) {
-		/* get the status before any error cleanup */
-		qc->err_mask = ac_err_mask(sata_oxnas_check_status(ap));
-		if (force_error) {
-			/* Pretend there has been a link error */
-			qc->err_mask |= AC_ERR_ATA_BUS;
-			DPRINTK(" ####force error####\n");
-		}
-		/* tell libata we're done */
-		local_irq_save(flags);
-		sata_oxnas_irq_clear(ap);
-		local_irq_restore(flags);
-		ata_qc_complete(qc);
-	} else {
-		VPRINTK("Ignoring interrupt, can't find the command tag="
-			"%d %08x\n", ap->link.active_tag, ap->qc_active);
-	}
-
-	/* maybe a hotplug event */
-	if (unlikely(int_status & INT_LINK_SERROR)) {
-		u32 serror;
-
-		sata_oxnas_scr_read_port(ap, SCR_ERROR, &serror);
-		if (serror & (SERR_DEV_XCHG | SERR_PHYRDY_CHG)) {
-			ata_ehi_hotplugged(&ap->link.eh_info);
-			ata_port_freeze(ap);
-		}
-	}
-}
-
-/**
- * irq_handler is the interrupt handling routine registered with the system,
- * by libata.
- */
-static irqreturn_t sata_oxnas_interrupt(int irq, void *dev_instance)
-{
-	struct ata_host *ah = dev_instance;
-	struct sata_oxnas_host_priv *hd = ah->private_data;
-	void __iomem *core_base = hd->core_base;
-
-	u32 int_status;
-	irqreturn_t ret = IRQ_NONE;
-	u32 port_no;
-	u32 mask;
-	int bug_present;
-
-	/* loop until there are no more interrupts */
-	while ((int_status = (ioread32(core_base + CORE_INT_STATUS)) &
-		(COREINT_END | (COREINT_END << 1)))) {
-
-		/* clear any interrupt */
-		iowrite32(int_status, core_base + CORE_INT_CLEAR);
-
-		/* Only need workaround_bug_6320 for single disk systems as dual
-		 * disk will use uCode which prevents this read underrun problem
-		 * from occurring.
-		 * All single disk systems will use port 0 */
-		for (port_no = 0; port_no < hd->n_ports; ++port_no) {
-			/* check the raw end of command interrupt to see if the
-			 * port is done */
-			mask = (COREINT_END << port_no);
-			if (!(int_status & mask))
-				continue;
-
-			/* this port had an interrupt, clear it */
-			iowrite32(mask, core_base + CORE_INT_CLEAR);
-			/* check for bug 6320 only if no microcode was loaded */
-			bug_present = (hd->current_ucode == UNKNOWN_MODE) &&
-				sata_oxnas_bug_6320_detect(ah->ports[port_no]);
-
-			sata_oxnas_port_irq(ah->ports[port_no],
-						bug_present);
-			ret = IRQ_HANDLED;
-		}
-	}
-
-	return ret;
-}
-
-/*
- * scsi mid-layer and libata interface structures
- */
-static struct scsi_host_template sata_oxnas_sht = {
-	ATA_NCQ_SHT("sata_oxnas"),
-	.can_queue = SATA_OXNAS_QUEUE_DEPTH,
-	.sg_tablesize = SATA_OXNAS_MAX_PRD,
-	.dma_boundary = ATA_DMA_BOUNDARY,
-	.unchecked_isa_dma  = 0,
-};
-
-
-static struct ata_port_operations sata_oxnas_ops = {
-	.inherits = &sata_port_ops,
-	.qc_prep = sata_oxnas_qc_prep,
-	.qc_issue = sata_oxnas_qc_issue,
-	.qc_fill_rtf = sata_oxnas_qc_fill_rtf,
-	.qc_new = sata_oxnas_qc_new,
-	.qc_free = sata_oxnas_qc_free,
-
-	.scr_read = sata_oxnas_scr_read,
-	.scr_write = sata_oxnas_scr_write,
-
-	.freeze = sata_oxnas_freeze,
-	.thaw = sata_oxnas_thaw,
-	.softreset = sata_oxnas_softreset,
-	/* .hardreset = sata_oxnas_hardreset, */
-	.postreset = sata_oxnas_postreset,
-	.error_handler = sata_oxnas_error_handler,
-	.post_internal_cmd = sata_oxnas_post_internal_cmd,
-
-	.port_start = sata_oxnas_port_start,
-	.port_stop = sata_oxnas_port_stop,
-
-	.host_stop = sata_oxnas_host_stop,
-	/* .pmp_attach = sata_oxnas_pmp_attach, */
-	/* .pmp_detach = sata_oxnas_pmp_detach, */
-	.sff_check_status = sata_oxnas_check_status,
-	.acquire_hw = sata_oxnas_acquire_hw,
-};
-
-static const struct ata_port_info sata_oxnas_port_info = {
-	.flags = SATA_OXNAS_HOST_FLAGS,
-	.pio_mask = ATA_PIO4,
-	.udma_mask = ATA_UDMA6,
-	.port_ops = &sata_oxnas_ops,
-};
-
-static int sata_oxnas_probe(struct platform_device *ofdev)
-{
-	int retval = -ENXIO;
-	int n_ports = 0;
-	void __iomem *port_base = NULL;
-	void __iomem *dmactl_base = NULL;
-	void __iomem *sgdma_base = NULL;
-	void __iomem *core_base = NULL;
-	void __iomem *phy_base = NULL;
-	struct reset_control *rstc;
-
-	struct resource res = {};
-	struct sata_oxnas_host_priv *host_priv = NULL;
-	int irq = 0;
-	struct ata_host *host = NULL;
-	struct clk *clk = NULL;
-
-	const struct ata_port_info *ppi[] = { &sata_oxnas_port_info, NULL };
-
-	of_property_read_u32(ofdev->dev.of_node, "nr-ports", &n_ports);
-	if (n_ports < 1 || n_ports > SATA_OXNAS_MAX_PORTS)
-		goto error_exit_with_cleanup;
-
-	port_base = of_iomap(ofdev->dev.of_node, 0);
-	if (!port_base)
-		goto error_exit_with_cleanup;
-
-	dmactl_base = of_iomap(ofdev->dev.of_node, 1);
-	if (!dmactl_base)
-		goto error_exit_with_cleanup;
-
-	sgdma_base = of_iomap(ofdev->dev.of_node, 2);
-	if (!sgdma_base)
-		goto error_exit_with_cleanup;
-
-	core_base = of_iomap(ofdev->dev.of_node, 3);
-	if (!core_base)
-		goto error_exit_with_cleanup;
-
-	phy_base = of_iomap(ofdev->dev.of_node, 4);
-	if (!phy_base)
-		goto error_exit_with_cleanup;
-
-	host_priv = devm_kzalloc(&ofdev->dev,
-					sizeof(struct sata_oxnas_host_priv),
-					GFP_KERNEL);
-	if (!host_priv)
-		goto error_exit_with_cleanup;
-
-	host_priv->port_base = port_base;
-	host_priv->dmactl_base = dmactl_base;
-	host_priv->sgdma_base = sgdma_base;
-	host_priv->core_base = core_base;
-	host_priv->phy_base = phy_base;
-	host_priv->n_ports = n_ports;
-	host_priv->current_ucode = UNKNOWN_MODE;
-
-	if (!of_address_to_resource(ofdev->dev.of_node, 5, &res)) {
-		host_priv->dma_base = res.start;
-		host_priv->dma_size = resource_size(&res);
-	}
-
-	irq = irq_of_parse_and_map(ofdev->dev.of_node, 0);
-	if (!irq) {
-		dev_err(&ofdev->dev, "invalid irq from platform\n");
-		goto error_exit_with_cleanup;
-	}
-	host_priv->irq = irq;
-
-	clk = of_clk_get(ofdev->dev.of_node, 0);
-	if (IS_ERR(clk)) {
-		retval = PTR_ERR(clk);
-		clk = NULL;
-		goto error_exit_with_cleanup;
-	}
-	host_priv->clk = clk;
-
-	rstc = devm_reset_control_get(&ofdev->dev, "sata");
-	if (IS_ERR(rstc)) {
-		retval = PTR_ERR(rstc);
-		goto error_exit_with_cleanup;
-	}
-	host_priv->rst_sata = rstc;
-
-	rstc = devm_reset_control_get(&ofdev->dev, "link");
-	if (IS_ERR(rstc)) {
-		retval = PTR_ERR(rstc);
-		goto error_exit_with_cleanup;
-	}
-	host_priv->rst_link = rstc;
-
-	rstc = devm_reset_control_get(&ofdev->dev, "phy");
-	if (IS_ERR(rstc)) {
-		retval = PTR_ERR(rstc);
-		goto error_exit_with_cleanup;
-	}
-	host_priv->rst_phy = rstc;
-
-	/* allocate host structure */
-	host = ata_host_alloc_pinfo(&ofdev->dev, ppi, n_ports);
-
-	if (!host) {
-		retval = -ENOMEM;
-		goto error_exit_with_cleanup;
-	}
-	host->private_data = host_priv;
-	host->iomap = port_base;
-
-	/* initialize core locking and queues */
-	init_waitqueue_head(&host_priv->fast_wait_queue);
-	init_waitqueue_head(&host_priv->scsi_wait_queue);
-	spin_lock_init(&host_priv->phy_lock);
-	spin_lock_init(&host_priv->core_lock);
-	host_priv->core_locked = 0;
-	host_priv->reentrant_port_no = -1;
-	host_priv->hw_lock_count = 0;
-	host_priv->direct_lock_count = 0;
-	host_priv->locker_uid = 0;
-	host_priv->current_locker_type = SATA_UNLOCKED;
-	host_priv->isr_arg = NULL;
-	host_priv->isr_callback = NULL;
-
-	/* initialize host controller */
-	retval = sata_oxnas_init_controller(host);
-	if (retval)
-		goto error_exit_with_cleanup;
-
-	/*
-	 * Now, register with libATA core, this will also initiate the
-	 * device discovery process, invoking our port_start() handler &
-	 * error_handler() to execute a dummy softreset EH session
-	 */
-	ata_host_activate(host, irq, sata_oxnas_interrupt, SATA_OXNAS_IRQ_FLAG,
-			  &sata_oxnas_sht);
-
-	return 0;
-
-error_exit_with_cleanup:
-	if (irq)
-		irq_dispose_mapping(host_priv->irq);
-	if (clk)
-		clk_put(clk);
-	if (host)
-		ata_host_detach(host);
-	if (port_base)
-		iounmap(port_base);
-	if (sgdma_base)
-		iounmap(sgdma_base);
-	if (core_base)
-		iounmap(core_base);
-	if (phy_base)
-		iounmap(phy_base);
-	return retval;
-}
-
-
-static int sata_oxnas_remove(struct platform_device *ofdev)
-{
-	struct ata_host *host = dev_get_drvdata(&ofdev->dev);
-	struct sata_oxnas_host_priv *host_priv = host->private_data;
-
-	ata_host_detach(host);
-
-	irq_dispose_mapping(host_priv->irq);
-	iounmap(host_priv->port_base);
-	iounmap(host_priv->sgdma_base);
-	iounmap(host_priv->core_base);
-
-	/* reset Controller, Link and PHY */
-	reset_control_assert(host_priv->rst_sata);
-	reset_control_assert(host_priv->rst_link);
-	reset_control_assert(host_priv->rst_phy);
-
-	/* Disable the clock to the SATA block */
-	clk_disable_unprepare(host_priv->clk);
-	clk_put(host_priv->clk);
-
-	return 0;
-}
-
-#ifdef CONFIG_PM
-static int sata_oxnas_suspend(struct platform_device *op, pm_message_t state)
-{
-	struct ata_host *host = dev_get_drvdata(&op->dev);
-
-	return ata_host_suspend(host, state);
-}
-
-static int sata_oxnas_resume(struct platform_device *op)
-{
-	struct ata_host *host = dev_get_drvdata(&op->dev);
-	int ret;
-
-	ret = sata_oxnas_init_controller(host);
-	if (ret) {
-		dev_err(&op->dev, "Error initializing hardware\n");
-		return ret;
-	}
-	ata_host_resume(host);
-	return 0;
-}
-#endif
-
-
-
-static struct of_device_id oxnas_sata_match[] = {
-	{
-		.compatible = "plxtech,nas782x-sata",
-	},
-	{},
-};
-
-MODULE_DEVICE_TABLE(of, oxnas_sata_match);
-
-static struct platform_driver oxnas_sata_driver = {
-	.driver = {
-		.name = "oxnas-sata",
-		.owner = THIS_MODULE,
-		.of_match_table = oxnas_sata_match,
-	},
-	.probe		= sata_oxnas_probe,
-	.remove		= sata_oxnas_remove,
-#ifdef CONFIG_PM
-	.suspend	= sata_oxnas_suspend,
-	.resume		= sata_oxnas_resume,
-#endif
-};
-
-module_platform_driver(oxnas_sata_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_VERSION("1.0");
-MODULE_AUTHOR("Oxford Semiconductor Ltd.");
-MODULE_DESCRIPTION("low-level driver for Oxford 934 SATA core");
diff --git a/target/linux/oxnas/files/drivers/clk/clk-oxnas.c b/target/linux/oxnas/files/drivers/clk/clk-oxnas.c
deleted file mode 100644
index 4dc6c44992..0000000000
--- a/target/linux/oxnas/files/drivers/clk/clk-oxnas.c
+++ /dev/null
@@ -1,297 +0,0 @@
-/*
- * Copyright (C) 2010 Broadcom
- * Copyright (C) 2012 Stephen Warren
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/clk.h>
-#include <linux/clkdev.h>
-#include <linux/clk-provider.h>
-#include <linux/of.h>
-#include <linux/delay.h>
-#include <linux/stringify.h>
-#include <linux/reset.h>
-#include <linux/io.h>
-#include <mach/hardware.h>
-#include <mach/utils.h>
-
-#define MHZ (1000 * 1000)
-
-struct clk_oxnas_pllb {
-	struct clk_hw hw;
-	struct device_node *devnode;
-	struct reset_control *rstc;
-};
-
-#define to_clk_oxnas_pllb(_hw) container_of(_hw, struct clk_oxnas_pllb, hw)
-
-static unsigned long plla_clk_recalc_rate(struct clk_hw *hw,
-	unsigned long parent_rate)
-{
-	unsigned long fin = parent_rate;
-	unsigned long pll0;
-	unsigned long fbdiv, refdiv, outdiv;
-
-	pll0 = readl_relaxed(SYS_CTRL_PLLA_CTRL0);
-	refdiv = (pll0 >> PLLA_REFDIV_SHIFT) & PLLA_REFDIV_MASK;
-	refdiv += 1;
-	outdiv = (pll0 >> PLLA_OUTDIV_SHIFT) & PLLA_OUTDIV_MASK;
-	outdiv += 1;
-	fbdiv = readl_relaxed(SYS_CTRL_PLLA_CTRL1);
-
-	/* seems we will not be here when pll is bypassed, so ignore this
-	 * case */
-
-	return fin / MHZ * fbdiv / (refdiv * outdiv) / 32768 * MHZ;
-}
-
-static const char *pll_clk_parents[] = {
-	"oscillator",
-};
-
-static struct clk_ops plla_ops = {
-	.recalc_rate = plla_clk_recalc_rate,
-};
-
-static struct clk_init_data clk_plla_init = {
-	.name = "plla",
-	.ops = &plla_ops,
-	.parent_names = pll_clk_parents,
-	.num_parents = ARRAY_SIZE(pll_clk_parents),
-};
-
-static struct clk_hw plla_hw = {
-	.init = &clk_plla_init,
-};
-
-static int pllb_clk_is_prepared(struct clk_hw *hw)
-{
-	struct clk_oxnas_pllb *pllb = to_clk_oxnas_pllb(hw);
-
-	return !!pllb->rstc;
-}
-
-static int pllb_clk_prepare(struct clk_hw *hw)
-{
-	struct clk_oxnas_pllb *pllb = to_clk_oxnas_pllb(hw);
-
-	pllb->rstc = of_reset_control_get(pllb->devnode, NULL);
-
-	return IS_ERR(pllb->rstc) ? PTR_ERR(pllb->rstc) : 0;
-}
-
-static void pllb_clk_unprepare(struct clk_hw *hw)
-{
-	struct clk_oxnas_pllb *pllb = to_clk_oxnas_pllb(hw);
-
-	BUG_ON(IS_ERR(pllb->rstc));
-
-	reset_control_put(pllb->rstc);
-	pllb->rstc = NULL;
-}
-
-static int pllb_clk_enable(struct clk_hw *hw)
-{
-	struct clk_oxnas_pllb *pllb = to_clk_oxnas_pllb(hw);
-
-	BUG_ON(IS_ERR(pllb->rstc));
-
-	/* put PLL into bypass */
-	oxnas_register_set_mask(SEC_CTRL_PLLB_CTRL0, BIT(PLLB_BYPASS));
-	wmb();
-	udelay(10);
-	reset_control_assert(pllb->rstc);
-	udelay(10);
-	/* set PLL B control information */
-	writel((1 << PLLB_ENSAT) | (1 << PLLB_OUTDIV) | (2 << PLLB_REFDIV),
-				SEC_CTRL_PLLB_CTRL0);
-	reset_control_deassert(pllb->rstc);
-	udelay(100);
-	oxnas_register_clear_mask(SEC_CTRL_PLLB_CTRL0, BIT(PLLB_BYPASS));
-
-	return 0;
-}
-
-static void pllb_clk_disable(struct clk_hw *hw)
-{
-	struct clk_oxnas_pllb *pllb = to_clk_oxnas_pllb(hw);
-
-	BUG_ON(IS_ERR(pllb->rstc));
-
-	/* put PLL into bypass */
-	oxnas_register_set_mask(SEC_CTRL_PLLB_CTRL0, BIT(PLLB_BYPASS));
-	wmb();
-	udelay(10);
-
-	reset_control_assert(pllb->rstc);
-}
-
-static struct clk_ops pllb_ops = {
-	.prepare = pllb_clk_prepare,
-	.unprepare = pllb_clk_unprepare,
-	.is_prepared = pllb_clk_is_prepared,
-	.enable = pllb_clk_enable,
-	.disable = pllb_clk_disable,
-};
-
-static struct clk_init_data clk_pllb_init = {
-	.name = "pllb",
-	.ops = &pllb_ops,
-	.parent_names = pll_clk_parents,
-	.num_parents = ARRAY_SIZE(pll_clk_parents),
-};
-
-
-/* standard gate clock */
-struct clk_std {
-	struct clk_hw hw;
-	signed char bit;
-};
-
-#define NUM_STD_CLKS 17
-#define to_stdclk(_hw) container_of(_hw, struct clk_std, hw)
-
-static int std_clk_is_enabled(struct clk_hw *hw)
-{
-	struct clk_std *std = to_stdclk(hw);
-
-	return readl_relaxed(SYSCTRL_CLK_STAT) & BIT(std->bit);
-}
-
-static int std_clk_enable(struct clk_hw *hw)
-{
-	struct clk_std *std = to_stdclk(hw);
-
-	writel(BIT(std->bit), SYS_CTRL_CLK_SET_CTRL);
-	return 0;
-}
-
-static void std_clk_disable(struct clk_hw *hw)
-{
-	struct clk_std *std = to_stdclk(hw);
-
-	writel(BIT(std->bit), SYS_CTRL_CLK_CLR_CTRL);
-}
-
-static struct clk_ops std_clk_ops = {
-	.enable = std_clk_enable,
-	.disable = std_clk_disable,
-	.is_enabled = std_clk_is_enabled,
-};
-
-static const char *std_clk_parents[] = {
-	"oscillator",
-};
-
-static const char *eth_parents[] = {
-	"gmacclk",
-};
-
-#define DECLARE_STD_CLKP(__clk, __bit, __parent)	\
-static struct clk_init_data clk_##__clk##_init = {	\
-	.name = __stringify(__clk),			\
-	.ops = &std_clk_ops,				\
-	.parent_names = __parent,		\
-	.num_parents = ARRAY_SIZE(__parent),	\
-};							\
-							\
-static struct clk_std clk_##__clk = {			\
-	.bit = __bit,					\
-	.hw = {						\
-		.init = &clk_##__clk##_init,		\
-	},						\
-}
-
-#define DECLARE_STD_CLK(__clk, __bit) DECLARE_STD_CLKP(__clk, __bit, \
-							std_clk_parents)
-
-DECLARE_STD_CLK(leon, 0);
-DECLARE_STD_CLK(dma_sgdma, 1);
-DECLARE_STD_CLK(cipher, 2);
-DECLARE_STD_CLK(sd, 3);
-DECLARE_STD_CLK(sata, 4);
-DECLARE_STD_CLK(audio, 5);
-DECLARE_STD_CLK(usbmph, 6);
-DECLARE_STD_CLKP(etha, 7, eth_parents);
-DECLARE_STD_CLK(pciea, 8);
-DECLARE_STD_CLK(static, 9);
-DECLARE_STD_CLK(ethb, 10);
-DECLARE_STD_CLK(pcieb, 11);
-DECLARE_STD_CLK(ref600, 12);
-DECLARE_STD_CLK(usbdev, 13);
-
-struct clk_hw *std_clk_hw_tbl[] = {
-	&clk_leon.hw,
-	&clk_dma_sgdma.hw,
-	&clk_cipher.hw,
-	&clk_sd.hw,
-	&clk_sata.hw,
-	&clk_audio.hw,
-	&clk_usbmph.hw,
-	&clk_etha.hw,
-	&clk_pciea.hw,
-	&clk_static.hw,
-	&clk_ethb.hw,
-	&clk_pcieb.hw,
-	&clk_ref600.hw,
-	&clk_usbdev.hw,
-};
-
-struct clk *std_clk_tbl[ARRAY_SIZE(std_clk_hw_tbl)];
-
-static struct clk_onecell_data std_clk_data;
-
-void __init oxnas_init_stdclk(struct device_node *np)
-{
-	int i;
-
-	for (i = 0; i < ARRAY_SIZE(std_clk_hw_tbl); i++) {
-		std_clk_tbl[i] = clk_register(NULL, std_clk_hw_tbl[i]);
-		BUG_ON(IS_ERR(std_clk_tbl[i]));
-	}
-	std_clk_data.clks = std_clk_tbl;
-	std_clk_data.clk_num = ARRAY_SIZE(std_clk_tbl);
-	of_clk_add_provider(np, of_clk_src_onecell_get, &std_clk_data);
-}
-CLK_OF_DECLARE(oxnas_pllstd, "plxtech,nas782x-stdclk", oxnas_init_stdclk);
-
-void __init oxnas_init_plla(struct device_node *np)
-{
-	struct clk *clk;
-
-	clk = clk_register(NULL, &plla_hw);
-	BUG_ON(IS_ERR(clk));
-	/* mark it as enabled */
-	clk_prepare_enable(clk);
-	of_clk_add_provider(np, of_clk_src_simple_get, clk);
-}
-CLK_OF_DECLARE(oxnas_plla, "plxtech,nas782x-plla", oxnas_init_plla);
-
-void __init oxnas_init_pllb(struct device_node *np)
-{
-	struct clk *clk;
-	struct clk_oxnas_pllb *pllb;
-
-	pllb = kmalloc(sizeof(*pllb), GFP_KERNEL);
-	BUG_ON(!pllb);
-
-	pllb->hw.init = &clk_pllb_init;
-	pllb->devnode = np;
-	pllb->rstc = NULL;
-
-	clk = clk_register(NULL, &pllb->hw);
-	BUG_ON(IS_ERR(clk));
-	of_clk_add_provider(np, of_clk_src_simple_get, clk);
-}
-CLK_OF_DECLARE(oxnas_pllb, "plxtech,nas782x-pllb", oxnas_init_pllb);
diff --git a/target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c b/target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c
deleted file mode 100644
index 7c8c4cf435..0000000000
--- a/target/linux/oxnas/files/drivers/clocksource/oxnas_rps_timer.c
+++ /dev/null
@@ -1,96 +0,0 @@
-/*
- * arch/arm/mach-ox820/rps-time.c
- *
- * Copyright (C) 2009 Oxford Semiconductor Ltd
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms and conditions of the GNU General Public License,
- * version 2, as published by the Free Software Foundation.
- *
- * This program is distributed in the hope it will be useful, but WITHOUT
- * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- * FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License for
- * more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- */
-
-#include <linux/init.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/io.h>
-#include <linux/clockchips.h>
-#include <linux/clk.h>
-#include <linux/of_irq.h>
-#include <linux/of_address.h>
-#include <linux/sched_clock.h>
-#include <mach/hardware.h>
-
-enum {
-	TIMER_LOAD = 0,
-	TIMER_CURR = 4,
-	TIMER_CTRL = 8,
-	TIMER_CLRINT = 0xC,
-
-	TIMER_BITS = 24,
-
-	TIMER_MAX_VAL = (1 << TIMER_BITS) - 1,
-
-	TIMER_PERIODIC = (1 << 6),
-	TIMER_ENABLE = (1 << 7),
-
-	TIMER_DIV1  = (0 << 2),
-	TIMER_DIV16  = (1 << 2),
-	TIMER_DIV256  = (2 << 2),
-
-	TIMER1_OFFSET = 0,
-	TIMER2_OFFSET = 0x20,
-
-};
-
-static u64 notrace rps_read_sched_clock(void)
-{
-	return ~readl_relaxed(RPSA_TIMER2_VAL);
-}
-
-static void __init rps_clocksource_init(void __iomem *base, ulong ref_rate)
-{
-	int ret;
-	ulong clock_rate;
-	/* use prescale 16 */
-	clock_rate = ref_rate / 16;
-
-	iowrite32(TIMER_MAX_VAL, base + TIMER_LOAD);
-	iowrite32(TIMER_PERIODIC | TIMER_ENABLE | TIMER_DIV16,
-			base + TIMER_CTRL);
-
-	ret = clocksource_mmio_init(base + TIMER_CURR, "rps_clocksource_timer",
-					clock_rate, 250, TIMER_BITS,
-					clocksource_mmio_readl_down);
-	if (ret)
-		panic("can't register clocksource\n");
-
-	sched_clock_register(rps_read_sched_clock, TIMER_BITS, clock_rate);
-}
-
-static void __init rps_timer_init(struct device_node *np)
-{
-	struct clk *refclk;
-	unsigned long ref_rate;
-	void __iomem *base;
-
-	refclk = of_clk_get(np, 0);
-
-	if (IS_ERR(refclk) || clk_prepare_enable(refclk))
-		panic("rps_timer_init: failed to get refclk\n");
-	ref_rate = clk_get_rate(refclk);
-
-	base = of_iomap(np, 0);
-	if (!base)
-		panic("rps_timer_init: failed to map io\n");
-
-	rps_clocksource_init(base + TIMER2_OFFSET, ref_rate);
-}
-
-CLOCKSOURCE_OF_DECLARE(nas782x, "plxtech,nas782x-rps-timer", rps_timer_init);
diff --git a/target/linux/oxnas/files/drivers/irqchip/irq-rps.c b/target/linux/oxnas/files/drivers/irqchip/irq-rps.c
deleted file mode 100644
index f2b0829de6..0000000000
--- a/target/linux/oxnas/files/drivers/irqchip/irq-rps.c
+++ /dev/null
@@ -1,145 +0,0 @@
-#include <linux/irqdomain.h>
-#include <linux/irq.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/irqchip/chained_irq.h>
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/irqchip.h>
-
-struct rps_chip_data {
-	void __iomem *base;
-	struct irq_chip chip;
-	struct irq_domain *domain;
-} rps_data;
-
-enum {
-	RPS_IRQ_BASE = 64,
-	RPS_IRQ_COUNT = 32,
-	PRS_HWIRQ_BASE = 0,
-
-	RPS_STATUS = 0,
-	RPS_RAW_STATUS = 4,
-	RPS_UNMASK = 8,
-	RPS_MASK = 0xc,
-};
-
-/*
- * Routines to acknowledge, disable and enable interrupts
- */
-static void rps_mask_irq(struct irq_data *d)
-{
-	struct rps_chip_data *chip_data = irq_data_get_irq_chip_data(d);
-	u32 mask = BIT(d->hwirq);
-
-	iowrite32(mask, chip_data->base + RPS_MASK);
-}
-
-static void rps_unmask_irq(struct irq_data *d)
-{
-	struct rps_chip_data *chip_data = irq_data_get_irq_chip_data(d);
-	u32 mask = BIT(d->hwirq);
-
-	iowrite32(mask, chip_data->base + RPS_UNMASK);
-}
-
-static struct irq_chip rps_chip = {
-	.name			= "RPS",
-	.irq_mask		= rps_mask_irq,
-	.irq_unmask		= rps_unmask_irq,
-};
-
-static int rps_irq_domain_xlate(struct irq_domain *d,
-				struct device_node *controller,
-				const u32 *intspec, unsigned int intsize,
-				unsigned long *out_hwirq,
-				unsigned int *out_type)
-{
-	if (irq_domain_get_of_node(d) != controller)
-		return -EINVAL;
-	if (intsize < 1)
-		return -EINVAL;
-
-	*out_hwirq = intspec[0];
-	/* Honestly I do not know the type */
-	*out_type = IRQ_TYPE_LEVEL_HIGH;
-
-	return 0;
-}
-
-static int rps_irq_domain_map(struct irq_domain *d, unsigned int irq,
-				irq_hw_number_t hw)
-{
-	irq_set_chip_and_handler(irq, &rps_chip, handle_level_irq);
-	irq_set_probe(irq);
-	irq_set_chip_data(irq, d->host_data);
-	return 0;
-}
-
-const struct irq_domain_ops rps_irq_domain_ops = {
-	.map = rps_irq_domain_map,
-	.xlate = rps_irq_domain_xlate,
-};
-
-static void rps_handle_cascade_irq(struct irq_desc *desc)
-{
-	struct rps_chip_data *chip_data = irq_desc_get_handler_data(desc);
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	unsigned int cascade_irq, rps_irq;
-	u32 status;
-
-	chained_irq_enter(chip, desc);
-
-	status = ioread32(chip_data->base + RPS_STATUS);
-	rps_irq = __ffs(status);
-	cascade_irq = irq_find_mapping(chip_data->domain, rps_irq);
-
-	if (unlikely(rps_irq >= RPS_IRQ_COUNT))
-		handle_bad_irq(desc);
-	else
-		generic_handle_irq(cascade_irq);
-
-	chained_irq_exit(chip, desc);
-}
-
-#ifdef CONFIG_OF
-int __init rps_of_init(struct device_node *node, struct device_node *parent)
-{
-	void __iomem *rps_base;
-	int irq_start = RPS_IRQ_BASE;
-	int irq_base;
-	int irq;
-
-	if (WARN_ON(!node))
-		return -ENODEV;
-
-	rps_base = of_iomap(node, 0);
-	WARN(!rps_base, "unable to map rps registers\n");
-	rps_data.base = rps_base;
-
-	irq_base = irq_alloc_descs(irq_start, 0, RPS_IRQ_COUNT, numa_node_id());
-	if (IS_ERR_VALUE(irq_base)) {
-		WARN(1, "Cannot allocate irq_descs @ IRQ%d, assuming pre-allocated\n",
-		     irq_start);
-		irq_base = irq_start;
-	}
-
-	rps_data.domain = irq_domain_add_legacy(node, RPS_IRQ_COUNT, irq_base,
-			PRS_HWIRQ_BASE, &rps_irq_domain_ops, &rps_data);
-
-	if (WARN_ON(!rps_data.domain))
-		return -ENOMEM;
-
-	if (parent) {
-		irq = irq_of_parse_and_map(node, 0);
-		if (irq_set_handler_data(irq, &rps_data) != 0)
-			BUG();
-		irq_set_chained_handler(irq, rps_handle_cascade_irq);
-	}
-	return 0;
-
-}
-
-IRQCHIP_DECLARE(nas782x, "plxtech,nas782x-rps", rps_of_init);
-#endif
diff --git a/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c b/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c
deleted file mode 100644
index 36807b7767..0000000000
--- a/target/linux/oxnas/files/drivers/mtd/nand/oxnas_nand.c
+++ /dev/null
@@ -1,206 +0,0 @@
-/*
- * Oxford Semiconductor OXNAS NAND driver
-
- * Copyright (C) 2016 Neil Armstrong <narmstrong@baylibre.com>
- * Heavily based on plat_nand.c :
- * Author: Vitaly Wool <vitalywool@gmail.com>
- * Copyright (C) 2013 Ma Haijun <mahaijuns@gmail.com>
- * Copyright (C) 2012 John Crispin <blogic@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License version 2 as
- * published by the Free Software Foundation.
- *
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/slab.h>
-#include <linux/clk.h>
-#include <linux/reset.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/partitions.h>
-#include <linux/of.h>
-
-/* Nand commands */
-#define OXNAS_NAND_CMD_ALE		BIT(18)
-#define OXNAS_NAND_CMD_CLE		BIT(19)
-
-#define OXNAS_NAND_MAX_CHIPS	1
-
-struct oxnas_nand {
-	struct nand_hw_control base;
-	void __iomem *io_base;
-	struct clk *clk;
-	struct nand_chip *chips[OXNAS_NAND_MAX_CHIPS];
-	unsigned long ctrl;
-	struct mtd_partition *partitions;
-	int nr_partitions;
-};
-
-static uint8_t oxnas_nand_read_byte(struct mtd_info *mtd)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct oxnas_nand *oxnas = nand_get_controller_data(chip);
-
-	return readb(oxnas->io_base);
-}
-
-static void oxnas_nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct oxnas_nand *oxnas = nand_get_controller_data(chip);
-
-	ioread8_rep(oxnas->io_base, buf, len);
-}
-
-static void oxnas_nand_write_buf(struct mtd_info *mtd,
-				 const uint8_t *buf, int len)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct oxnas_nand *oxnas = nand_get_controller_data(chip);
-
-	iowrite8_rep(oxnas->io_base + oxnas->ctrl, buf, len);
-}
-
-/* Single CS command control */
-static void oxnas_nand_cmd_ctrl(struct mtd_info *mtd, int cmd,
-				unsigned int ctrl)
-{
-	struct nand_chip *chip = mtd_to_nand(mtd);
-	struct oxnas_nand *oxnas = nand_get_controller_data(chip);
-
-	if (ctrl & NAND_CTRL_CHANGE) {
-		if (ctrl & NAND_CLE)
-			oxnas->ctrl = OXNAS_NAND_CMD_CLE;
-		else if (ctrl & NAND_ALE)
-			oxnas->ctrl = OXNAS_NAND_CMD_ALE;
-		else
-			oxnas->ctrl = 0;
-	}
-
-	if (cmd != NAND_CMD_NONE)
-		writeb(cmd, oxnas->io_base + oxnas->ctrl);
-}
-
-/*
- * Probe for the NAND device.
- */
-static int oxnas_nand_probe(struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	struct device_node *nand_np;
-	struct oxnas_nand *oxnas;
-	struct nand_chip *chip;
-	struct mtd_info *mtd;
-	struct resource *res;
-	int nchips = 0;
-	int count = 0;
-	int err = 0;
-
-	/* Allocate memory for the device structure (and zero it) */
-	oxnas = devm_kzalloc(&pdev->dev, sizeof(struct nand_chip),
-			    GFP_KERNEL);
-	if (!oxnas)
-		return -ENOMEM;
-
-	nand_hw_control_init(&oxnas->base);
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	oxnas->io_base = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(oxnas->io_base))
-		return PTR_ERR(oxnas->io_base);
-
-	oxnas->clk = devm_clk_get(&pdev->dev, NULL);
-	if (IS_ERR(oxnas->clk))
-		oxnas->clk = NULL;
-
-	/* Only a single chip node is supported */
-	count = of_get_child_count(np);
-	if (count > 1)
-		return -EINVAL;
-
-	clk_prepare_enable(oxnas->clk);
-	device_reset_optional(&pdev->dev);
-
-	for_each_child_of_node(np, nand_np) {
-		chip = devm_kzalloc(&pdev->dev, sizeof(struct nand_chip),
-				    GFP_KERNEL);
-		if (!chip)
-			return -ENOMEM;
-
-		chip->controller = &oxnas->base;
-
-		nand_set_flash_node(chip, nand_np);
-		nand_set_controller_data(chip, oxnas);
-
-		mtd = nand_to_mtd(chip);
-		mtd->dev.parent = &pdev->dev;
-		mtd->priv = chip;
-
-		chip->cmd_ctrl = oxnas_nand_cmd_ctrl;
-		chip->read_buf = oxnas_nand_read_buf;
-		chip->read_byte = oxnas_nand_read_byte;
-		chip->write_buf = oxnas_nand_write_buf;
-		chip->chip_delay = 30;
-
-		/* Scan to find existence of the device */
-		err = nand_scan(mtd, 1);
-		if (err)
-			return err;
-
-		err = mtd_device_register(mtd, NULL, 0);
-		if (err) {
-			nand_release(mtd);
-			return err;
-		}
-
-		oxnas->chips[nchips] = chip;
-		++nchips;
-	}
-
-	/* Exit if no chips found */
-	if (!nchips)
-		return -ENODEV;
-
-	platform_set_drvdata(pdev, oxnas);
-
-	return 0;
-}
-
-static int oxnas_nand_remove(struct platform_device *pdev)
-{
-	struct oxnas_nand *oxnas = platform_get_drvdata(pdev);
-
-	if (oxnas->chips[0])
-		nand_release(nand_to_mtd(oxnas->chips[0]));
-
-	clk_disable_unprepare(oxnas->clk);
-
-	return 0;
-}
-
-static const struct of_device_id oxnas_nand_match[] = {
-	{ .compatible = "oxsemi,ox820-nand" },
-	{},
-};
-MODULE_DEVICE_TABLE(of, oxnas_nand_match);
-
-static struct platform_driver oxnas_nand_driver = {
-	.probe	= oxnas_nand_probe,
-	.remove	= oxnas_nand_remove,
-	.driver	= {
-		.name		= "oxnas_nand",
-		.of_match_table = oxnas_nand_match,
-	},
-};
-
-module_platform_driver(oxnas_nand_driver);
-
-MODULE_LICENSE("GPL");
-MODULE_AUTHOR("Neil Armstrong <narmstrong@baylibre.com>");
-MODULE_DESCRIPTION("Oxnas NAND driver");
-MODULE_ALIAS("platform:oxnas_nand");
diff --git a/target/linux/oxnas/files/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c b/target/linux/oxnas/files/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c
deleted file mode 100644
index aafb118144..0000000000
--- a/target/linux/oxnas/files/drivers/net/ethernet/stmicro/stmmac/dwmac-oxnas.c
+++ /dev/null
@@ -1,145 +0,0 @@
-/* Copyright OpenWrt.org (C) 2015.
- * Copyright Altera Corporation (C) 2014. All rights reserved.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License, version 2,
- * as published by the Free Software Foundation.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- * Adopted from dwmac-socfpga.c
- * Based on code found in mach-oxnas.c
- */
-
-#include <linux/mfd/syscon.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_net.h>
-#include <linux/phy.h>
-#include <linux/regmap.h>
-#include <linux/reset.h>
-#include <linux/stmmac.h>
-
-#include <mach/hardware.h>
-
-#include "stmmac.h"
-#include "stmmac_platform.h"
-
-struct oxnas_gmac {
-	struct clk *clk;
-};
-
-static int oxnas_gmac_init(struct platform_device *pdev, void *priv)
-{
-	struct oxnas_gmac *bsp_priv = priv;
-	int ret = 0;
-	unsigned value;
-
-	ret = device_reset(&pdev->dev);
-	if (ret)
-		return ret;
-
-	if (IS_ERR(bsp_priv->clk))
-		return PTR_ERR(bsp_priv->clk);
-	clk_prepare_enable(bsp_priv->clk);
-
-	value = readl(SYS_CTRL_GMAC_CTRL);
-
-	/* Enable GMII_GTXCLK to follow GMII_REFCLK, required for gigabit PHY */
-	value |= BIT(SYS_CTRL_GMAC_CKEN_GTX);
-	/* Use simple mux for 25/125 Mhz clock switching */
-	value |= BIT(SYS_CTRL_GMAC_SIMPLE_MUX);
-	/* set auto switch tx clock source */
-	value |= BIT(SYS_CTRL_GMAC_AUTO_TX_SOURCE);
-	/* enable tx & rx vardelay */
-	value |= BIT(SYS_CTRL_GMAC_CKEN_TX_OUT);
-	value |= BIT(SYS_CTRL_GMAC_CKEN_TXN_OUT);
-	value |= BIT(SYS_CTRL_GMAC_CKEN_TX_IN);
-	value |= BIT(SYS_CTRL_GMAC_CKEN_RX_OUT);
-	value |= BIT(SYS_CTRL_GMAC_CKEN_RXN_OUT);
-	value |= BIT(SYS_CTRL_GMAC_CKEN_RX_IN);
-	writel(value, SYS_CTRL_GMAC_CTRL);
-
-	/* set tx & rx vardelay */
-	value = 0;
-	value |= SYS_CTRL_GMAC_TX_VARDELAY(4);
-	value |= SYS_CTRL_GMAC_TXN_VARDELAY(2);
-	value |= SYS_CTRL_GMAC_RX_VARDELAY(10);
-	value |= SYS_CTRL_GMAC_RXN_VARDELAY(8);
-	writel(value, SYS_CTRL_GMAC_DELAY_CTRL);
-
-	return 0;
-}
-
-static void oxnas_gmac_exit(struct platform_device *pdev, void *priv)
-{
-	struct reset_control *rstc;
-
-	clk_disable_unprepare(priv);
-	devm_clk_put(&pdev->dev, priv);
-
-	rstc = reset_control_get(&pdev->dev, NULL);
-	if (!IS_ERR(rstc)) {
-		reset_control_assert(rstc);
-		reset_control_put(rstc);
-	}
-}
-
-static int oxnas_gmac_probe(struct platform_device *pdev)
-{
-	struct plat_stmmacenet_data *plat_dat;
-	struct stmmac_resources stmmac_res;
-	int			ret;
-	struct device		*dev = &pdev->dev;
-	struct oxnas_gmac	*bsp_priv;
-
-	bsp_priv = devm_kzalloc(dev, sizeof(*bsp_priv), GFP_KERNEL);
-	if (!bsp_priv)
-		return -ENOMEM;
-	bsp_priv->clk = devm_clk_get(dev, "gmac");
-	if (IS_ERR(bsp_priv->clk))
-		return PTR_ERR(bsp_priv->clk);
-
-	ret = stmmac_get_platform_resources(pdev, &stmmac_res);
-	if (ret)
-		return ret;
-
-	plat_dat = stmmac_probe_config_dt(pdev, &stmmac_res.mac);
-	if (IS_ERR(plat_dat))
-		return PTR_ERR(plat_dat);
-
-	plat_dat->bsp_priv = bsp_priv;
-	plat_dat->init = oxnas_gmac_init;
-	plat_dat->exit = oxnas_gmac_exit;
-
-	ret = oxnas_gmac_init(pdev, bsp_priv);
-	if (ret)
-		return ret;
-
-	return stmmac_dvr_probe(dev, plat_dat, &stmmac_res);
-}
-
-static const struct of_device_id oxnas_gmac_match[] = {
-	{ .compatible = "plxtech,nas782x-gmac" },
-	{ }
-};
-MODULE_DEVICE_TABLE(of, oxnas_gmac_match);
-
-static struct platform_driver oxnas_gmac_driver = {
-	.probe  = oxnas_gmac_probe,
-	.remove = stmmac_pltfr_remove,
-	.driver = {
-		.name		= "oxnas-gmac",
-		.pm		= &stmmac_pltfr_pm_ops,
-		.of_match_table = oxnas_gmac_match,
-	},
-};
-module_platform_driver(oxnas_gmac_driver);
-
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c b/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c
deleted file mode 100644
index 9e8d6d9f93..0000000000
--- a/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c
+++ /dev/null
@@ -1,676 +0,0 @@
-/*
- * PCIe driver for PLX NAS782X SoCs
- *
- * This file is licensed under the terms of the GNU General Public
- * License version 2.  This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/pci.h>
-#include <linux/clk.h>
-#include <linux/module.h>
-#include <linux/mbus.h>
-#include <linux/slab.h>
-#include <linux/platform_device.h>
-#include <linux/of_address.h>
-#include <linux/of_pci.h>
-#include <linux/of_irq.h>
-#include <linux/of_platform.h>
-#include <linux/of_gpio.h>
-#include <linux/gpio.h>
-#include <linux/delay.h>
-#include <linux/clk.h>
-#include <linux/reset.h>
-#include <mach/iomap.h>
-#include <mach/hardware.h>
-#include <mach/utils.h>
-
-#define VERSION_ID_MAGIC		0x082510b5
-#define LINK_UP_TIMEOUT_SECONDS		1
-#define NUM_CONTROLLERS			1
-
-enum {
-	PCIE_DEVICE_TYPE_MASK = 0x0F,
-	PCIE_DEVICE_TYPE_ENDPOINT = 0,
-	PCIE_DEVICE_TYPE_LEGACY_ENDPOINT = 1,
-	PCIE_DEVICE_TYPE_ROOT = 4,
-
-	PCIE_LTSSM = BIT(4),
-	PCIE_READY_ENTR_L23 = BIT(9),
-	PCIE_LINK_UP = BIT(11),
-	PCIE_OBTRANS = BIT(12),
-};
-
-enum {
-	HCSL_BIAS_ON = BIT(0),
-	HCSL_PCIE_EN = BIT(1),
-	HCSL_PCIEA_EN = BIT(2),
-	HCSL_PCIEB_EN = BIT(3),
-};
-
-enum {
-	/* pcie phy reg offset */
-	PHY_ADDR = 0,
-	PHY_DATA = 4,
-	/* phy data reg bits */
-	READ_EN = BIT(16),
-	WRITE_EN = BIT(17),
-	CAP_DATA = BIT(18),
-};
-
-/* core config registers */
-enum {
-	PCI_CONFIG_VERSION_DEVICEID = 0,
-	PCI_CONFIG_COMMAND_STATUS = 4,
-};
-
-/* inbound config registers */
-enum {
-	IB_ADDR_XLATE_ENABLE = 0xFC,
-
-	/* bits */
-	ENABLE_IN_ADDR_TRANS = BIT(0),
-};
-
-/* outbound config registers, offset relative to PCIE_POM0_MEM_ADDR */
-enum {
-	PCIE_POM0_MEM_ADDR	= 0,
-	PCIE_POM1_MEM_ADDR	= 4,
-	PCIE_IN0_MEM_ADDR	= 8,
-	PCIE_IN1_MEM_ADDR	= 12,
-	PCIE_IN_IO_ADDR		= 16,
-	PCIE_IN_CFG0_ADDR	= 20,
-	PCIE_IN_CFG1_ADDR	= 24,
-	PCIE_IN_MSG_ADDR	= 28,
-	PCIE_IN0_MEM_LIMIT	= 32,
-	PCIE_IN1_MEM_LIMIT	= 36,
-	PCIE_IN_IO_LIMIT	= 40,
-	PCIE_IN_CFG0_LIMIT	= 44,
-	PCIE_IN_CFG1_LIMIT	= 48,
-	PCIE_IN_MSG_LIMIT	= 52,
-	PCIE_AHB_SLAVE_CTRL	= 56,
-
-	PCIE_SLAVE_BE_SHIFT	= 22,
-};
-
-#define ADDR_VAL(val)	((val) & 0xFFFF)
-#define DATA_VAL(val)	((val) & 0xFFFF)
-
-#define PCIE_SLAVE_BE(val)	((val) << PCIE_SLAVE_BE_SHIFT)
-#define PCIE_SLAVE_BE_MASK	PCIE_SLAVE_BE(0xF)
-
-struct oxnas_pcie_shared {
-	/* seems all access are serialized, no lock required */
-	int refcount;
-};
-
-/* Structure representing one PCIe interfaces */
-struct oxnas_pcie {
-	void __iomem *cfgbase;
-	void __iomem *base;
-	void __iomem *inbound;
-	void __iomem *outbound;
-	void __iomem *pcie_ctrl;
-
-	int haslink;
-	struct platform_device *pdev;
-	struct resource io;
-	struct resource cfg;
-	struct resource pre_mem;	/* prefetchable */
-	struct resource non_mem;	/* non-prefetchable */
-	struct resource busn;		/* max available bus numbers */
-	int card_reset;			/* gpio pin, optional */
-	unsigned hcsl_en;		/* hcsl pci enable bit */
-	struct clk *clk;
-	struct clk *busclk;		/* for pcie bus, actually the PLLB */
-	void *private_data[1];
-	spinlock_t lock;
-};
-
-static struct oxnas_pcie_shared pcie_shared = {
-	.refcount = 0,
-};
-
-static inline struct oxnas_pcie *sys_to_pcie(struct pci_sys_data *sys)
-{
-	return sys->private_data;
-}
-
-
-static inline void set_out_lanes(struct oxnas_pcie *pcie, unsigned lanes)
-{
-	oxnas_register_value_mask(pcie->outbound + PCIE_AHB_SLAVE_CTRL,
-				  PCIE_SLAVE_BE_MASK, PCIE_SLAVE_BE(lanes));
-	wmb();
-}
-
-static int oxnas_pcie_link_up(struct oxnas_pcie *pcie)
-{
-	unsigned long end;
-
-	/* Poll for PCIE link up */
-	end = jiffies + (LINK_UP_TIMEOUT_SECONDS * HZ);
-	while (!time_after(jiffies, end)) {
-		if (readl(pcie->pcie_ctrl) & PCIE_LINK_UP)
-			return 1;
-	}
-	return 0;
-}
-
-static void __init oxnas_pcie_setup_hw(struct oxnas_pcie *pcie)
-{
-	/* We won't have any inbound address translation. This allows PCI
-	 * devices to access anywhere in the AHB address map. Might be regarded
-	 * as a bit dangerous, but let's get things working before we worry
-	 * about that
-	 */
-	oxnas_register_clear_mask(pcie->inbound + IB_ADDR_XLATE_ENABLE,
-				  ENABLE_IN_ADDR_TRANS);
-	wmb();
-
-	/*
-	 * Program outbound translation windows
-	 *
-	 * Outbound window is what is referred to as "PCI client" region in HRM
-	 *
-	 * Could use the larger alternative address space to get >>64M regions
-	 * for graphics cards etc., but will not bother at this point.
-	 *
-	 * IP bug means that AMBA window size must be a power of 2
-	 *
-	 * Set mem0 window for first 16MB of outbound window non-prefetchable
-	 * Set mem1 window for second 16MB of outbound window prefetchable
-	 * Set io window for next 16MB of outbound window
-	 * Set cfg0 for final 1MB of outbound window
-	 *
-	 * Ignore mem1, cfg1 and msg windows for now as no obvious use cases for
-	 * 820 that would need them
-	 *
-	 * Probably ideally want no offset between mem0 window start as seen by
-	 * ARM and as seen on PCI bus and get Linux to assign memory regions to
-	 * PCI devices using the same "PCI client" region start address as seen
-	 * by ARM
-	 */
-
-	/* Set PCIeA mem0 region to be 1st 16MB of the 64MB PCIeA window */
-	writel_relaxed(pcie->non_mem.start, pcie->outbound + PCIE_IN0_MEM_ADDR);
-	writel_relaxed(pcie->non_mem.end, pcie->outbound + PCIE_IN0_MEM_LIMIT);
-	writel_relaxed(pcie->non_mem.start, pcie->outbound + PCIE_POM0_MEM_ADDR);
-
-	/* Set PCIeA mem1 region to be 2nd 16MB of the 64MB PCIeA window */
-	writel_relaxed(pcie->pre_mem.start, pcie->outbound + PCIE_IN1_MEM_ADDR);
-	writel_relaxed(pcie->pre_mem.end, pcie->outbound + PCIE_IN1_MEM_LIMIT);
-	writel_relaxed(pcie->pre_mem.start, pcie->outbound + PCIE_POM1_MEM_ADDR);
-
-	/* Set PCIeA io to be third 16M region of the 64MB PCIeA window*/
-	writel_relaxed(pcie->io.start,	pcie->outbound + PCIE_IN_IO_ADDR);
-	writel_relaxed(pcie->io.end,	pcie->outbound + PCIE_IN_IO_LIMIT);
-
-	/* Set PCIeA cgf0 to be last 16M region of the 64MB PCIeA window*/
-	writel_relaxed(pcie->cfg.start,	pcie->outbound + PCIE_IN_CFG0_ADDR);
-	writel_relaxed(pcie->cfg.end, pcie->outbound + PCIE_IN_CFG0_LIMIT);
-	wmb();
-
-	/* Enable outbound address translation */
-	oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_OBTRANS);
-	wmb();
-
-	/*
-	 * Program PCIe command register for core to:
-	 *  enable memory space
-	 *  enable bus master
-	 *  enable io
-	 */
-	writel_relaxed(7, pcie->base + PCI_CONFIG_COMMAND_STATUS);
-	/* which is which */
-	wmb();
-}
-
-static unsigned oxnas_pcie_cfg_to_offset(
-	struct pci_sys_data *sys,
-	unsigned char bus_number,
-	unsigned int devfn,
-	int where)
-{
-	unsigned int function = PCI_FUNC(devfn);
-	unsigned int slot = PCI_SLOT(devfn);
-	unsigned char bus_number_offset;
-
-	bus_number_offset = bus_number - sys->busnr;
-
-	/*
-	 * We'll assume for now that the offset, function, slot, bus encoding
-	 * should map onto linear, contiguous addresses in PCIe config space,
-	 * albeit that the majority will be unused as only slot 0 is valid for
-	 * any PCIe bus and most devices have only function 0
-	 *
-	 * Could be that PCIe in fact works by not encoding the slot number into
-	 * the config space address as it's known that only slot 0 is valid.
-	 * We'll have to experiment if/when we get a PCIe switch connected to
-	 * the PCIe host
-	 */
-	return (bus_number_offset << 20) | (slot << 15) | (function << 12) |
-		(where & ~3);
-}
-
-/* PCI configuration space write function */
-static int oxnas_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
-			      int where, int size, u32 val)
-{
-	unsigned long flags;
-	struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
-	unsigned offset;
-	u32 value;
-	u32 lanes;
-
-	/* Only a single device per bus for PCIe point-to-point links */
-	if (PCI_SLOT(devfn) > 0)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	if (!pcie->haslink)
-		return PCIBIOS_DEVICE_NOT_FOUND;
-
-	offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
-					  where);
-
-	value = val << (8 * (where & 3));
-	lanes = (0xf >> (4-size)) << (where & 3);
-	/* it race with mem and io write, but the possibility is low, normally
-	 * all config writes happens at driver initialize stage, wont interleave
-	 * with others.
-	 * and many pcie cards use dword (4bytes) access mem/io access only,
-	 * so not bother to copy that ugly work-around now. */
-	spin_lock_irqsave(&pcie->lock, flags);
-	set_out_lanes(pcie, lanes);
-	writel_relaxed(value, pcie->cfgbase + offset);
-	set_out_lanes(pcie, 0xf);
-	spin_unlock_irqrestore(&pcie->lock, flags);
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-/* PCI configuration space read function */
-static int oxnas_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
-			      int size, u32 *val)
-{
-	struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
-	unsigned offset;
-	u32 value;
-	u32 left_bytes, right_bytes;
-
-	/* Only a single device per bus for PCIe point-to-point links */
-	if (PCI_SLOT(devfn) > 0) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	if (!pcie->haslink) {
-		*val = 0xffffffff;
-		return PCIBIOS_DEVICE_NOT_FOUND;
-	}
-
-	offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
-					  where);
-	value = readl_relaxed(pcie->cfgbase + offset);
-	left_bytes = where & 3;
-	right_bytes = 4 - left_bytes - size;
-	value <<= right_bytes * 8;
-	value >>= (left_bytes + right_bytes) * 8;
-	*val = value;
-
-	return PCIBIOS_SUCCESSFUL;
-}
-
-static struct pci_ops oxnas_pcie_ops = {
-	.read = oxnas_pcie_rd_conf,
-	.write = oxnas_pcie_wr_conf,
-};
-
-static int __init oxnas_pcie_setup(int nr, struct pci_sys_data *sys)
-{
-	struct oxnas_pcie *pcie = sys_to_pcie(sys);
-
-	pci_add_resource_offset(&sys->resources, &pcie->non_mem, sys->mem_offset);
-	pci_add_resource_offset(&sys->resources, &pcie->pre_mem, sys->mem_offset);
-	pci_add_resource_offset(&sys->resources, &pcie->io, sys->io_offset);
-	pci_add_resource(&sys->resources, &pcie->busn);
-	if (sys->busnr == 0) { /* default one */
-		sys->busnr = pcie->busn.start;
-	}
-	/* do not use devm_ioremap_resource, it does not like cfg resource */
-	pcie->cfgbase = devm_ioremap(&pcie->pdev->dev, pcie->cfg.start,
-				     resource_size(&pcie->cfg));
-	if (!pcie->cfgbase)
-		return -ENOMEM;
-
-	oxnas_pcie_setup_hw(pcie);
-
-	return 1;
-}
-
-static void __init oxnas_pcie_enable(struct device *dev, struct oxnas_pcie *pcie)
-{
-	struct hw_pci hw;
-	int i;
-
-	memset(&hw, 0, sizeof(hw));
-	for (i = 0; i < NUM_CONTROLLERS; i++)
-		pcie->private_data[i] = pcie;
-
-	hw.nr_controllers = NUM_CONTROLLERS;
-/* I think use stack pointer is a bad idea though it is valid in this case */
-	hw.private_data   = pcie->private_data;
-	hw.setup          = oxnas_pcie_setup;
-	hw.map_irq        = of_irq_parse_and_map_pci;
-	hw.ops            = &oxnas_pcie_ops;
-
-	/* pass dev to maintain of tree, interrupt mapping rely on this */
-	pci_common_init_dev(dev, &hw);
-}
-
-void oxnas_pcie_init_shared_hw(struct platform_device *pdev,
-			       void __iomem *phybase)
-{
-	struct reset_control *rstc;
-	int ret;
-
-	/* generate clocks from HCSL buffers, shared parts */
-	writel(HCSL_BIAS_ON|HCSL_PCIE_EN, SYS_CTRL_HCSL_CTRL);
-
-	/* Ensure PCIe PHY is properly reset */
-	rstc = reset_control_get(&pdev->dev, "phy");
-	if (IS_ERR(rstc)) {
-		ret = PTR_ERR(rstc);
-	} else {
-		ret = reset_control_reset(rstc);
-		reset_control_put(rstc);
-	}
-
-	if (ret) {
-		dev_err(&pdev->dev, "phy reset failed %d\n", ret);
-		return;
-	}
-
-	/* Enable PCIe Pre-Emphasis: What these value means? */
-
-	writel(ADDR_VAL(0x0014), phybase + PHY_ADDR);
-	writel(DATA_VAL(0xce10) | CAP_DATA, phybase + PHY_DATA);
-	writel(DATA_VAL(0xce10) | WRITE_EN, phybase + PHY_DATA);
-
-	writel(ADDR_VAL(0x2004), phybase + PHY_ADDR);
-	writel(DATA_VAL(0x82c7) | CAP_DATA, phybase + PHY_DATA);
-	writel(DATA_VAL(0x82c7) | WRITE_EN, phybase + PHY_DATA);
-}
-
-static int oxnas_pcie_shared_init(struct platform_device *pdev)
-{
-	if (++pcie_shared.refcount == 1) {
-		/* we are the first */
-		struct device_node *np = pdev->dev.of_node;
-		void __iomem *phy = of_iomap(np, 2);
-		if (!phy) {
-			--pcie_shared.refcount;
-			return -ENOMEM;
-		}
-		oxnas_pcie_init_shared_hw(pdev, phy);
-		iounmap(phy);
-		return 0;
-	} else {
-		return 0;
-	}
-}
-
-#if 0
-/* maybe we will call it when enter low power state */
-static void oxnas_pcie_shared_deinit(struct platform_device *pdev)
-{
-	if (--pcie_shared.refcount == 0) {
-		/* no cleanup needed */;
-	}
-}
-#endif
-
-static int __init
-oxnas_pcie_map_registers(struct platform_device *pdev,
-			 struct device_node *np,
-			 struct oxnas_pcie *pcie)
-{
-	struct resource regs;
-	int ret = 0;
-	u32 outbound_ctrl_offset;
-	u32 pcie_ctrl_offset;
-
-	/* 2 is reserved for shared phy */
-	ret = of_address_to_resource(np, 0, &regs);
-	if (ret)
-		return -EINVAL;
-	pcie->base = devm_ioremap_resource(&pdev->dev, &regs);
-	if (!pcie->base)
-		return -ENOMEM;
-
-	ret = of_address_to_resource(np, 1, &regs);
-	if (ret)
-		return -EINVAL;
-	pcie->inbound = devm_ioremap_resource(&pdev->dev, &regs);
-	if (!pcie->inbound)
-		return -ENOMEM;
-
-
-	if (of_property_read_u32(np, "plxtech,pcie-outbound-offset",
-				 &outbound_ctrl_offset))
-		return -EINVAL;
-	/* SYSCRTL is shared by too many drivers, so is mapped by board file */
-	pcie->outbound = IOMEM(OXNAS_SYSCRTL_BASE_VA + outbound_ctrl_offset);
-
-	if (of_property_read_u32(np, "plxtech,pcie-ctrl-offset",
-				 &pcie_ctrl_offset))
-		return -EINVAL;
-	pcie->pcie_ctrl = IOMEM(OXNAS_SYSCRTL_BASE_VA + pcie_ctrl_offset);
-
-	return 0;
-}
-
-static int __init oxnas_pcie_init_res(struct platform_device *pdev,
-				      struct oxnas_pcie *pcie,
-				      struct device_node *np)
-{
-	struct of_pci_range range;
-	struct of_pci_range_parser parser;
-	int ret;
-
-	if (of_pci_range_parser_init(&parser, np))
-		return -EINVAL;
-
-	/* Get the I/O and memory ranges from DT */
-	for_each_of_pci_range(&parser, &range) {
-
-		unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
-		if (restype == IORESOURCE_IO) {
-			of_pci_range_to_resource(&range, np, &pcie->io);
-			pcie->io.name = "I/O";
-		}
-		if (restype == IORESOURCE_MEM) {
-			if (range.flags & IORESOURCE_PREFETCH) {
-				of_pci_range_to_resource(&range, np, &pcie->pre_mem);
-				pcie->pre_mem.name = "PRE MEM";
-			} else {
-				of_pci_range_to_resource(&range, np, &pcie->non_mem);
-				pcie->non_mem.name = "NON MEM";
-			}
-
-		}
-		if (restype == 0)
-			of_pci_range_to_resource(&range, np, &pcie->cfg);
-	}
-
-	/* Get the bus range */
-	ret = of_pci_parse_bus_range(np, &pcie->busn);
-
-	if (ret) {
-		dev_err(&pdev->dev, "failed to parse bus-range property: %d\n",
-			ret);
-		return ret;
-	}
-
-	pcie->card_reset = of_get_gpio(np, 0);
-	if (pcie->card_reset < 0)
-		dev_info(&pdev->dev, "card reset gpio pin not exists\n");
-
-	if (of_property_read_u32(np, "plxtech,pcie-hcsl-bit", &pcie->hcsl_en))
-		return -EINVAL;
-
-	pcie->clk = of_clk_get_by_name(np, "pcie");
-	if (IS_ERR(pcie->clk)) {
-		return PTR_ERR(pcie->clk);
-	}
-
-	pcie->busclk = of_clk_get_by_name(np, "busclk");
-	if (IS_ERR(pcie->busclk)) {
-		clk_put(pcie->clk);
-		return PTR_ERR(pcie->busclk);
-	}
-
-	return 0;
-}
-
-static void oxnas_pcie_init_hw(struct platform_device *pdev,
-			       struct oxnas_pcie *pcie)
-{
-	u32 version_id;
-	int ret;
-
-	clk_prepare_enable(pcie->busclk);
-
-	/* reset PCIe cards use hard-wired gpio pin */
-	if (pcie->card_reset >= 0 &&
-	    !gpio_direction_output(pcie->card_reset, 0)) {
-		wmb();
-		mdelay(10);
-		/* must tri-state the pin to pull it up */
-		gpio_direction_input(pcie->card_reset);
-		wmb();
-		mdelay(100);
-	}
-
-	oxnas_register_set_mask(SYS_CTRL_HCSL_CTRL, BIT(pcie->hcsl_en));
-
-	/* core */
-	ret = device_reset(&pdev->dev);
-	if (ret) {
-		dev_err(&pdev->dev, "core reset failed %d\n", ret);
-		return;
-	}
-
-	/* Start PCIe core clocks */
-	clk_prepare_enable(pcie->clk);
-
-	version_id = readl_relaxed(pcie->base + PCI_CONFIG_VERSION_DEVICEID);
-	dev_info(&pdev->dev, "PCIe version/deviceID 0x%x\n", version_id);
-
-	if (version_id != VERSION_ID_MAGIC) {
-		dev_info(&pdev->dev, "PCIe controller not found\n");
-		pcie->haslink = 0;
-		return;
-	}
-
-	/* allow entry to L23 state */
-	oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_READY_ENTR_L23);
-
-	/* Set PCIe core into RootCore mode */
-	oxnas_register_value_mask(pcie->pcie_ctrl, PCIE_DEVICE_TYPE_MASK,
-				  PCIE_DEVICE_TYPE_ROOT);
-	wmb();
-
-	/* Bring up the PCI core */
-	oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_LTSSM);
-	wmb();
-}
-
-static int __init oxnas_pcie_probe(struct platform_device *pdev)
-{
-	struct oxnas_pcie *pcie;
-	struct device_node *np = pdev->dev.of_node;
-	int ret;
-
-	pcie = devm_kzalloc(&pdev->dev, sizeof(struct oxnas_pcie),
-			    GFP_KERNEL);
-	if (!pcie)
-		return -ENOMEM;
-
-	pcie->pdev = pdev;
-	pcie->haslink = 1;
-	spin_lock_init(&pcie->lock);
-
-	ret = oxnas_pcie_init_res(pdev, pcie, np);
-	if (ret)
-		return ret;
-	if (pcie->card_reset >= 0) {
-		ret = gpio_request_one(pcie->card_reset, GPIOF_DIR_IN,
-				       dev_name(&pdev->dev));
-		if (ret) {
-			dev_err(&pdev->dev, "cannot request gpio pin %d\n",
-				pcie->card_reset);
-			return ret;
-		}
-	}
-
-	ret = oxnas_pcie_map_registers(pdev, np, pcie);
-	if (ret) {
-		dev_err(&pdev->dev, "cannot map registers\n");
-		goto err_free_gpio;
-	}
-
-	ret = oxnas_pcie_shared_init(pdev);
-	if (ret)
-		goto err_free_gpio;
-
-	/* if hw not found, haslink cleared */
-	oxnas_pcie_init_hw(pdev, pcie);
-
-	if (pcie->haslink && oxnas_pcie_link_up(pcie)) {
-		pcie->haslink = 1;
-		dev_info(&pdev->dev, "link up\n");
-	} else {
-		pcie->haslink = 0;
-		dev_info(&pdev->dev, "link down\n");
-	}
-	/* should we register our controller even when pcie->haslink is 0 ? */
-	/* register the controller with framework */
-	oxnas_pcie_enable(&pdev->dev, pcie);
-
-	return 0;
-
-err_free_gpio:
-	if (pcie->card_reset)
-		gpio_free(pcie->card_reset);
-
-	return ret;
-}
-
-static const struct of_device_id oxnas_pcie_of_match_table[] = {
-	{ .compatible = "plxtech,nas782x-pcie", },
-	{},
-};
-MODULE_DEVICE_TABLE(of, oxnas_pcie_of_match_table);
-
-static struct platform_driver oxnas_pcie_driver = {
-	.driver = {
-		.owner = THIS_MODULE,
-		.name = "oxnas-pcie",
-		.of_match_table =
-		   of_match_ptr(oxnas_pcie_of_match_table),
-	},
-};
-
-static int __init oxnas_pcie_init(void)
-{
-	return platform_driver_probe(&oxnas_pcie_driver,
-				     oxnas_pcie_probe);
-}
-
-subsys_initcall(oxnas_pcie_init);
-
-MODULE_AUTHOR("Ma Haijun <mahaijuns@gmail.com>");
-MODULE_DESCRIPTION("NAS782x PCIe driver");
-MODULE_LICENSE("GPLv2");
diff --git a/target/linux/oxnas/files/drivers/pinctrl/pinctrl-oxnas.c b/target/linux/oxnas/files/drivers/pinctrl/pinctrl-oxnas.c
deleted file mode 100644
index 38a8cbb451..0000000000
--- a/target/linux/oxnas/files/drivers/pinctrl/pinctrl-oxnas.c
+++ /dev/null
@@ -1,1461 +0,0 @@
-/*
- * oxnas pinctrl driver based on at91 pinctrl driver
- *
- * Copyright (C) 2011-2012 Jean-Christophe PLAGNIOL-VILLARD <plagnioj@jcrosoft.com>
- *
- * Under GPLv2 only
- */
-#include <linux/clk.h>
-#include <linux/err.h>
-#include <linux/init.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/of_device.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/slab.h>
-#include <linux/interrupt.h>
-#include <linux/irq.h>
-#include <linux/irqdomain.h>
-#include <linux/irqchip/chained_irq.h>
-#include <linux/io.h>
-#include <linux/gpio.h>
-#include <linux/pinctrl/machine.h>
-#include <linux/pinctrl/pinconf.h>
-#include <linux/pinctrl/pinctrl.h>
-#include <linux/pinctrl/pinmux.h>
-/* Since we request GPIOs from ourself */
-#include <linux/pinctrl/consumer.h>
-#include <linux/spinlock.h>
-
-#include "core.h"
-
-#include <mach/utils.h>
-
-#define MAX_NB_GPIO_PER_BANK	32
-#define MAX_GPIO_BANKS		2
-
-struct oxnas_gpio_chip {
-	struct gpio_chip	chip;
-	struct pinctrl_gpio_range range;
-	void __iomem		*regbase;  /* GPIOA/B virtual address */
-	void __iomem		*ctrlbase; /* SYS/SEC_CTRL virtual address */
-	struct irq_domain	*domain;   /* associated irq domain */
-	spinlock_t		lock;
-};
-
-#define to_oxnas_gpio_chip(c) container_of(c, struct oxnas_gpio_chip, chip)
-
-static struct oxnas_gpio_chip *gpio_chips[MAX_GPIO_BANKS];
-
-static int gpio_banks;
-
-#define PULL_UP		(1 << 0)
-#define PULL_DOWN	(1 << 1)
-#define DEBOUNCE	(1 << 2)
-
-/**
- * struct oxnas_pmx_func - describes pinmux functions
- * @name: the name of this specific function
- * @groups: corresponding pin groups
- * @ngroups: the number of groups
- */
-struct oxnas_pmx_func {
-	const char	*name;
-	const char	**groups;
-	unsigned	ngroups;
-};
-
-enum oxnas_mux {
-	OXNAS_PINMUX_GPIO,
-	OXNAS_PINMUX_FUNC2,
-	OXNAS_PINMUX_FUNC3,
-	OXNAS_PINMUX_FUNC4,
-	OXNAS_PINMUX_DEBUG,
-	OXNAS_PINMUX_ALT,
-};
-
-enum {
-	INPUT_VALUE = 0,
-	OUTPUT_ENABLE = 4,
-	IRQ_PENDING = 0xC,
-	OUTPUT_VALUE = 0x10,
-	OUTPUT_SET = 0x14,
-	OUTPUT_CLEAR = 0x18,
-	OUTPUT_EN_SET = 0x1C,
-	OUTPUT_EN_CLEAR = 0x20,
-	DEBOUNCE_ENABLE = 0x24,
-	RE_IRQ_ENABLE = 0x28, /* rising edge */
-	FE_IRQ_ENABLE = 0x2C, /* falling edge */
-	RE_IRQ_PENDING = 0x30, /* rising edge */
-	FE_IRQ_PENDING = 0x34, /* falling edge */
-	CLOCK_DIV = 0x48,
-	PULL_ENABLE = 0x50,
-	PULL_SENSE = 0x54, /* 1 up, 0 down */
-
-
-	DEBOUNCE_MASK = 0x3FFF0000,
-	/* put hw debounce and soft config at same bit position*/
-	DEBOUNCE_SHIFT = 16
-};
-
-enum {
-	PINMUX_SECONDARY_SEL = 0x14,
-	PINMUX_TERTIARY_SEL = 0x8c,
-	PINMUX_QUATERNARY_SEL = 0x94,
-	PINMUX_DEBUG_SEL = 0x9c,
-	PINMUX_ALTERNATIVE_SEL = 0xa4,
-	PINMUX_PULLUP_SEL = 0xac,
-};
-
-/**
- * struct oxnas_pmx_pin - describes an pin mux
- * @bank: the bank of the pin
- * @pin: the pin number in the @bank
- * @mux: the mux mode : gpio or periph_x of the pin i.e. alternate function.
- * @conf: the configuration of the pin: PULL_UP, MULTIDRIVE etc...
- */
-struct oxnas_pmx_pin {
-	uint32_t	bank;
-	uint32_t	pin;
-	enum oxnas_mux	mux;
-	unsigned long	conf;
-};
-
-/**
- * struct oxnas_pin_group - describes an pin group
- * @name: the name of this specific pin group
- * @pins_conf: the mux mode for each pin in this group. The size of this
- *	array is the same as pins.
- * @pins: an array of discrete physical pins used in this group, taken
- *	from the driver-local pin enumeration space
- * @npins: the number of pins in this group array, i.e. the number of
- *	elements in .pins so we can iterate over that array
- */
-struct oxnas_pin_group {
-	const char		*name;
-	struct oxnas_pmx_pin	*pins_conf;
-	unsigned int		*pins;
-	unsigned		npins;
-};
-
-struct oxnas_pinctrl {
-	struct device		*dev;
-	struct pinctrl_dev	*pctl;
-
-	int			nbanks;
-
-	uint32_t		*mux_mask;
-	int			nmux;
-
-	struct oxnas_pmx_func	*functions;
-	int			nfunctions;
-
-	struct oxnas_pin_group	*groups;
-	int			ngroups;
-};
-
-static const inline struct oxnas_pin_group *oxnas_pinctrl_find_group_by_name(
-				const struct oxnas_pinctrl *info,
-				const char *name)
-{
-	const struct oxnas_pin_group *grp = NULL;
-	int i;
-
-	for (i = 0; i < info->ngroups; i++) {
-		if (strcmp(info->groups[i].name, name))
-			continue;
-
-		grp = &info->groups[i];
-		dev_dbg(info->dev, "%s: %d 0:%d\n", name, grp->npins,
-			grp->pins[0]);
-		break;
-	}
-
-	return grp;
-}
-
-static int oxnas_get_groups_count(struct pinctrl_dev *pctldev)
-{
-	struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
-
-	return info->ngroups;
-}
-
-static const char *oxnas_get_group_name(struct pinctrl_dev *pctldev,
-				       unsigned selector)
-{
-	struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
-
-	return info->groups[selector].name;
-}
-
-static int oxnas_get_group_pins(struct pinctrl_dev *pctldev, unsigned selector,
-			       const unsigned **pins,
-			       unsigned *npins)
-{
-	struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
-
-	if (selector >= info->ngroups)
-		return -EINVAL;
-
-	*pins = info->groups[selector].pins;
-	*npins = info->groups[selector].npins;
-
-	return 0;
-}
-
-static void oxnas_pin_dbg_show(struct pinctrl_dev *pctldev, struct seq_file *s,
-		   unsigned offset)
-{
-	seq_printf(s, "%s", dev_name(pctldev->dev));
-}
-
-static int oxnas_dt_node_to_map(struct pinctrl_dev *pctldev,
-			struct device_node *np,
-			struct pinctrl_map **map, unsigned *num_maps)
-{
-	struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
-	const struct oxnas_pin_group *grp;
-	struct pinctrl_map *new_map;
-	struct device_node *parent;
-	int map_num = 1;
-	int i;
-
-	/*
-	 * first find the group of this node and check if we need create
-	 * config maps for pins
-	 */
-	grp = oxnas_pinctrl_find_group_by_name(info, np->name);
-	if (!grp) {
-		dev_err(info->dev, "unable to find group for node %s\n",
-			np->name);
-		return -EINVAL;
-	}
-
-	map_num += grp->npins;
-	new_map = devm_kzalloc(pctldev->dev, sizeof(*new_map) * map_num,
-			       GFP_KERNEL);
-	if (!new_map)
-		return -ENOMEM;
-
-	*map = new_map;
-	*num_maps = map_num;
-
-	/* create mux map */
-	parent = of_get_parent(np);
-	if (!parent) {
-		devm_kfree(pctldev->dev, new_map);
-		return -EINVAL;
-	}
-	new_map[0].type = PIN_MAP_TYPE_MUX_GROUP;
-	new_map[0].data.mux.function = parent->name;
-	new_map[0].data.mux.group = np->name;
-	of_node_put(parent);
-
-	/* create config map */
-	new_map++;
-	for (i = 0; i < grp->npins; i++) {
-		new_map[i].type = PIN_MAP_TYPE_CONFIGS_PIN;
-		new_map[i].data.configs.group_or_pin =
-				pin_get_name(pctldev, grp->pins[i]);
-		new_map[i].data.configs.configs = &grp->pins_conf[i].conf;
-		new_map[i].data.configs.num_configs = 1;
-	}
-
-	dev_dbg(pctldev->dev, "maps: function %s group %s num %d\n",
-		(*map)->data.mux.function, (*map)->data.mux.group, map_num);
-
-	return 0;
-}
-
-static void oxnas_dt_free_map(struct pinctrl_dev *pctldev,
-				struct pinctrl_map *map, unsigned num_maps)
-{
-}
-
-static const struct pinctrl_ops oxnas_pctrl_ops = {
-	.get_groups_count	= oxnas_get_groups_count,
-	.get_group_name		= oxnas_get_group_name,
-	.get_group_pins		= oxnas_get_group_pins,
-	.pin_dbg_show		= oxnas_pin_dbg_show,
-	.dt_node_to_map		= oxnas_dt_node_to_map,
-	.dt_free_map		= oxnas_dt_free_map,
-};
-
-static void __iomem *pin_to_gpioctrl(struct oxnas_pinctrl *info,
-				 unsigned int bank)
-{
-	return gpio_chips[bank]->regbase;
-}
-
-static void __iomem *pin_to_muxctrl(struct oxnas_pinctrl *info,
-				 unsigned int bank)
-{
-	return gpio_chips[bank]->ctrlbase;
-}
-
-
-static inline int pin_to_bank(unsigned pin)
-{
-	return pin / MAX_NB_GPIO_PER_BANK;
-}
-
-static unsigned pin_to_mask(unsigned int pin)
-{
-	return 1 << pin;
-}
-
-static void oxnas_mux_disable_interrupt(void __iomem *pio, unsigned mask)
-{
-	oxnas_register_clear_mask(pio + RE_IRQ_ENABLE, mask);
-	oxnas_register_clear_mask(pio + FE_IRQ_ENABLE, mask);
-}
-
-static unsigned oxnas_mux_get_pullup(void __iomem *pio, unsigned pin)
-{
-	return (readl_relaxed(pio + PULL_ENABLE) & BIT(pin)) &&
-		(readl_relaxed(pio + PULL_SENSE) & BIT(pin));
-}
-
-static void oxnas_mux_set_pullup(void __iomem *pio, unsigned mask, bool on)
-{
-	if (on) {
-		oxnas_register_set_mask(pio + PULL_SENSE, mask);
-		oxnas_register_set_mask(pio + PULL_ENABLE, mask);
-	} else {
-		oxnas_register_clear_mask(pio + PULL_ENABLE, mask);
-	}
-}
-
-static bool oxnas_mux_get_pulldown(void __iomem *pio, unsigned pin)
-{
-	return (readl_relaxed(pio + PULL_ENABLE) & BIT(pin)) &&
-			(!(readl_relaxed(pio + PULL_SENSE) & BIT(pin)));
-}
-
-static void oxnas_mux_set_pulldown(void __iomem *pio, unsigned mask, bool on)
-{
-	if (on) {
-		oxnas_register_clear_mask(pio + PULL_SENSE, mask);
-		oxnas_register_set_mask(pio + PULL_ENABLE, mask);
-	} else {
-		oxnas_register_clear_mask(pio + PULL_ENABLE, mask);
-	};
-}
-
-/* unfortunately debounce control are shared */
-static bool oxnas_mux_get_debounce(void __iomem *pio, unsigned pin, u32 *div)
-{
-	*div = __raw_readl(pio + CLOCK_DIV) & DEBOUNCE_MASK;
-	return __raw_readl(pio + DEBOUNCE_ENABLE) & BIT(pin);
-}
-
-static void oxnas_mux_set_debounce(void __iomem *pio, unsigned mask,
-				bool is_on, u32 div)
-{
-	if (is_on) {
-		oxnas_register_value_mask(pio + CLOCK_DIV, DEBOUNCE_MASK, div);
-		oxnas_register_set_mask(pio + DEBOUNCE_ENABLE, mask);
-	} else {
-		oxnas_register_clear_mask(pio + DEBOUNCE_ENABLE, mask);
-	}
-}
-
-
-static void oxnas_mux_set_func2(void __iomem *cio, unsigned mask)
-{
-/* in fact, SECONDARY takes precedence, so clear others is not necessary */
-	oxnas_register_set_mask(cio + PINMUX_SECONDARY_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask);
-}
-
-static void oxnas_mux_set_func3(void __iomem *cio, unsigned mask)
-{
-	oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask);
-	oxnas_register_set_mask(cio + PINMUX_TERTIARY_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask);
-}
-
-static void oxnas_mux_set_func4(void __iomem *cio, unsigned mask)
-{
-	oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask);
-	oxnas_register_set_mask(cio + PINMUX_QUATERNARY_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask);
-}
-
-static void oxnas_mux_set_func_dbg(void __iomem *cio, unsigned mask)
-{
-	oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask);
-	oxnas_register_set_mask(cio + PINMUX_DEBUG_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask);
-}
-
-static void oxnas_mux_set_func_alt(void __iomem *cio, unsigned mask)
-{
-	oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask);
-	oxnas_register_set_mask(cio + PINMUX_ALTERNATIVE_SEL, mask);
-}
-
-static void oxnas_mux_set_gpio(void __iomem *cio, unsigned mask)
-{
-	oxnas_register_clear_mask(cio + PINMUX_SECONDARY_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_TERTIARY_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_QUATERNARY_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_DEBUG_SEL, mask);
-	oxnas_register_clear_mask(cio + PINMUX_ALTERNATIVE_SEL, mask);
-}
-
-static enum oxnas_mux oxnas_mux_get_func(void __iomem *cio, unsigned mask)
-{
-	if (readl_relaxed(cio + PINMUX_SECONDARY_SEL) & mask)
-		return OXNAS_PINMUX_FUNC2;
-	if (readl_relaxed(cio + PINMUX_TERTIARY_SEL) & mask)
-		return OXNAS_PINMUX_FUNC3;
-	if (readl_relaxed(cio + PINMUX_QUATERNARY_SEL) & mask)
-		return OXNAS_PINMUX_FUNC4;
-	if (readl_relaxed(cio + PINMUX_DEBUG_SEL) & mask)
-		return OXNAS_PINMUX_DEBUG;
-	if (readl_relaxed(cio + PINMUX_ALTERNATIVE_SEL) & mask)
-		return OXNAS_PINMUX_ALT;
-	return OXNAS_PINMUX_GPIO;
-}
-
-
-static void oxnas_pin_dbg(const struct device *dev,
-			  const struct oxnas_pmx_pin *pin)
-{
-	if (pin->mux) {
-		dev_dbg(dev,
-			"MF_%c%d configured as periph%c with conf = 0x%lu\n",
-			pin->bank + 'A', pin->pin, pin->mux - 1 + 'A',
-			pin->conf);
-	} else {
-		dev_dbg(dev, "MF_%c%d configured as gpio with conf = 0x%lu\n",
-			pin->bank + 'A', pin->pin, pin->conf);
-	}
-}
-
-static int pin_check_config(struct oxnas_pinctrl *info, const char *name,
-			    int index, const struct oxnas_pmx_pin *pin)
-{
-	int mux;
-
-	/* check if it's a valid config */
-	if (pin->bank >= info->nbanks) {
-		dev_err(info->dev, "%s: pin conf %d bank_id %d >= nbanks %d\n",
-			name, index, pin->bank, info->nbanks);
-		return -EINVAL;
-	}
-
-	if (pin->pin >= MAX_NB_GPIO_PER_BANK) {
-		dev_err(info->dev, "%s: pin conf %d pin_bank_id %d >= %d\n",
-			name, index, pin->pin, MAX_NB_GPIO_PER_BANK);
-		return -EINVAL;
-	}
-	/* gpio always allowed */
-	if (!pin->mux)
-		return 0;
-
-	mux = pin->mux - 1;
-
-	if (mux >= info->nmux) {
-		dev_err(info->dev, "%s: pin conf %d mux_id %d >= nmux %d\n",
-			name, index, mux, info->nmux);
-		return -EINVAL;
-	}
-
-	if (!(info->mux_mask[pin->bank * info->nmux + mux] & 1 << pin->pin)) {
-		dev_err(info->dev, "%s: pin conf %d mux_id %d not supported for MF_%c%d\n",
-			name, index, mux, pin->bank + 'A', pin->pin);
-		return -EINVAL;
-	}
-
-	return 0;
-}
-
-static void oxnas_mux_gpio_enable(void __iomem *cio, void __iomem *pio,
-				  unsigned mask, bool input)
-{
-	oxnas_mux_set_gpio(cio, mask);
-	if (input)
-		writel_relaxed(mask, pio + OUTPUT_EN_CLEAR);
-	else
-		writel_relaxed(mask, pio + OUTPUT_EN_SET);
-}
-
-static void oxnas_mux_gpio_disable(void __iomem *cio, void __iomem *pio,
-				   unsigned mask)
-{
-	/* when switch to other function,  gpio is disabled automatically */
-	return;
-}
-
-static int oxnas_pmx_set_mux(struct pinctrl_dev *pctldev, unsigned selector,
-			    unsigned group)
-{
-	struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
-	const struct oxnas_pmx_pin *pins_conf = info->groups[group].pins_conf;
-	const struct oxnas_pmx_pin *pin;
-	uint32_t npins = info->groups[group].npins;
-	int i, ret;
-	unsigned mask;
-	void __iomem *pio;
-	void __iomem *cio;
-
-	dev_dbg(info->dev, "enable function %s group %s\n",
-		info->functions[selector].name, info->groups[group].name);
-
-	/* first check that all the pins of the group are valid with a valid
-	 * paramter */
-	for (i = 0; i < npins; i++) {
-		pin = &pins_conf[i];
-		ret = pin_check_config(info, info->groups[group].name, i, pin);
-		if (ret)
-			return ret;
-	}
-
-	for (i = 0; i < npins; i++) {
-		pin = &pins_conf[i];
-		oxnas_pin_dbg(info->dev, pin);
-
-		pio = pin_to_gpioctrl(info, pin->bank);
-		cio = pin_to_muxctrl(info, pin->bank);
-
-		mask = pin_to_mask(pin->pin);
-		oxnas_mux_disable_interrupt(pio, mask);
-
-		switch (pin->mux) {
-		case OXNAS_PINMUX_GPIO:
-			oxnas_mux_gpio_enable(cio, pio, mask, 1);
-			break;
-		case OXNAS_PINMUX_FUNC2:
-			oxnas_mux_set_func2(cio, mask);
-			break;
-		case OXNAS_PINMUX_FUNC3:
-			oxnas_mux_set_func3(cio, mask);
-			break;
-		case OXNAS_PINMUX_FUNC4:
-			oxnas_mux_set_func4(cio, mask);
-			break;
-		case OXNAS_PINMUX_DEBUG:
-			oxnas_mux_set_func_dbg(cio, mask);
-			break;
-		case OXNAS_PINMUX_ALT:
-			oxnas_mux_set_func_alt(cio, mask);
-			break;
-		}
-		if (pin->mux)
-			oxnas_mux_gpio_disable(cio, pio, mask);
-	}
-
-	return 0;
-}
-
-static int oxnas_pmx_get_funcs_count(struct pinctrl_dev *pctldev)
-{
-	struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
-
-	return info->nfunctions;
-}
-
-static const char *oxnas_pmx_get_func_name(struct pinctrl_dev *pctldev,
-					   unsigned selector)
-{
-	struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
-
-	return info->functions[selector].name;
-}
-
-static int oxnas_pmx_get_groups(struct pinctrl_dev *pctldev, unsigned selector,
-				const char * const **groups,
-				unsigned * const num_groups)
-{
-	struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
-
-	*groups = info->functions[selector].groups;
-	*num_groups = info->functions[selector].ngroups;
-
-	return 0;
-}
-
-static int oxnas_gpio_request_enable(struct pinctrl_dev *pctldev,
-				     struct pinctrl_gpio_range *range,
-				     unsigned offset)
-{
-	struct oxnas_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
-	struct oxnas_gpio_chip *oxnas_chip;
-	struct gpio_chip *chip;
-	unsigned mask;
-
-	if (!range) {
-		dev_err(npct->dev, "invalid range\n");
-		return -EINVAL;
-	}
-	if (!range->gc) {
-		dev_err(npct->dev, "missing GPIO chip in range\n");
-		return -EINVAL;
-	}
-	chip = range->gc;
-	oxnas_chip = container_of(chip, struct oxnas_gpio_chip, chip);
-
-	dev_dbg(npct->dev, "enable pin %u as GPIO\n", offset);
-
-	mask = 1 << (offset - chip->base);
-
-	dev_dbg(npct->dev, "enable pin %u as MF_%c%d 0x%x\n",
-		offset, 'A' + range->id, offset - chip->base, mask);
-
-	oxnas_mux_set_gpio(oxnas_chip->ctrlbase, mask);
-
-	return 0;
-}
-
-static void oxnas_gpio_disable_free(struct pinctrl_dev *pctldev,
-				    struct pinctrl_gpio_range *range,
-				    unsigned offset)
-{
-	struct oxnas_pinctrl *npct = pinctrl_dev_get_drvdata(pctldev);
-
-	dev_dbg(npct->dev, "disable pin %u as GPIO\n", offset);
-	/* Set the pin to some default state, GPIO is usually default */
-}
-
-static const struct pinmux_ops oxnas_pmx_ops = {
-	.get_functions_count	= oxnas_pmx_get_funcs_count,
-	.get_function_name	= oxnas_pmx_get_func_name,
-	.get_function_groups	= oxnas_pmx_get_groups,
-	.set_mux		= oxnas_pmx_set_mux,
-	.gpio_request_enable	= oxnas_gpio_request_enable,
-	.gpio_disable_free	= oxnas_gpio_disable_free,
-};
-
-static int oxnas_pinconf_get(struct pinctrl_dev *pctldev,
-			     unsigned pin_id, unsigned long *config)
-{
-	struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
-	void __iomem *pio;
-	unsigned pin;
-	int div;
-
-	dev_dbg(info->dev, "%s:%d, pin_id=%d, config=0x%lx", __func__,
-		__LINE__, pin_id, *config);
-	pio = pin_to_gpioctrl(info, pin_to_bank(pin_id));
-	pin = pin_id % MAX_NB_GPIO_PER_BANK;
-
-	if (oxnas_mux_get_pullup(pio, pin))
-		*config |= PULL_UP;
-
-	if (oxnas_mux_get_pulldown(pio, pin))
-		*config |= PULL_DOWN;
-
-	if (oxnas_mux_get_debounce(pio, pin, &div))
-		*config |= DEBOUNCE | div;
-	return 0;
-}
-
-static int oxnas_pinconf_set(struct pinctrl_dev *pctldev,
-			     unsigned pin_id, unsigned long *configs,
-			     unsigned num_configs)
-{
-	struct oxnas_pinctrl *info = pinctrl_dev_get_drvdata(pctldev);
-	unsigned mask;
-	void __iomem *pio;
-	int i;
-	unsigned long config;
-
-	pio = pin_to_gpioctrl(info, pin_to_bank(pin_id));
-	mask = pin_to_mask(pin_id % MAX_NB_GPIO_PER_BANK);
-
-	for (i = 0; i < num_configs; i++) {
-		config = configs[i];
-
-		dev_dbg(info->dev,
-			"%s:%d, pin_id=%d, config=0x%lx",
-			__func__, __LINE__, pin_id, config);
-
-		if ((config & PULL_UP) && (config & PULL_DOWN))
-			return -EINVAL;
-
-		oxnas_mux_set_pullup(pio, mask, config & PULL_UP);
-		oxnas_mux_set_pulldown(pio, mask, config & PULL_DOWN);
-		oxnas_mux_set_debounce(pio, mask, config & DEBOUNCE,
-				       config & DEBOUNCE_MASK);
-
-	} /* for each config */
-
-	return 0;
-}
-
-static void oxnas_pinconf_dbg_show(struct pinctrl_dev *pctldev,
-				   struct seq_file *s, unsigned pin_id)
-{
-
-}
-
-static void oxnas_pinconf_group_dbg_show(struct pinctrl_dev *pctldev,
-					 struct seq_file *s, unsigned group)
-{
-}
-
-static const struct pinconf_ops oxnas_pinconf_ops = {
-	.pin_config_get			= oxnas_pinconf_get,
-	.pin_config_set			= oxnas_pinconf_set,
-	.pin_config_dbg_show		= oxnas_pinconf_dbg_show,
-	.pin_config_group_dbg_show	= oxnas_pinconf_group_dbg_show,
-};
-
-static struct pinctrl_desc oxnas_pinctrl_desc = {
-	.pctlops	= &oxnas_pctrl_ops,
-	.pmxops		= &oxnas_pmx_ops,
-	.confops	= &oxnas_pinconf_ops,
-	.owner		= THIS_MODULE,
-};
-
-static const char *gpio_compat = "plxtech,nas782x-gpio";
-
-static void oxnas_pinctrl_child_count(struct oxnas_pinctrl *info,
-				      struct device_node *np)
-{
-	struct device_node *child;
-
-	for_each_child_of_node(np, child) {
-		if (of_device_is_compatible(child, gpio_compat)) {
-			info->nbanks++;
-		} else {
-			info->nfunctions++;
-			info->ngroups += of_get_child_count(child);
-		}
-	}
-}
-
-static int oxnas_pinctrl_mux_mask(struct oxnas_pinctrl *info,
-				  struct device_node *np)
-{
-	int ret = 0;
-	int size;
-	const __be32 *list;
-
-	list = of_get_property(np, "plxtech,mux-mask", &size);
-	if (!list) {
-		dev_err(info->dev, "can not read the mux-mask of %d\n", size);
-		return -EINVAL;
-	}
-
-	size /= sizeof(*list);
-	if (!size || size % info->nbanks) {
-		dev_err(info->dev, "wrong mux mask array should be by %d\n",
-			info->nbanks);
-		return -EINVAL;
-	}
-	info->nmux = size / info->nbanks;
-
-	info->mux_mask = devm_kzalloc(info->dev, sizeof(u32) * size, GFP_KERNEL);
-	if (!info->mux_mask) {
-		dev_err(info->dev, "could not alloc mux_mask\n");
-		return -ENOMEM;
-	}
-
-	ret = of_property_read_u32_array(np, "plxtech,mux-mask",
-					  info->mux_mask, size);
-	if (ret)
-		dev_err(info->dev, "can not read the mux-mask of %d\n", size);
-	return ret;
-}
-
-static int oxnas_pinctrl_parse_groups(struct device_node *np,
-				      struct oxnas_pin_group *grp,
-				      struct oxnas_pinctrl *info, u32 index)
-{
-	struct oxnas_pmx_pin *pin;
-	int size;
-	const __be32 *list;
-	int i, j;
-
-	dev_dbg(info->dev, "group(%d): %s\n", index, np->name);
-
-	/* Initialise group */
-	grp->name = np->name;
-
-	/*
-	 * the binding format is plxtech,pins = <bank pin mux CONFIG ...>,
-	 * do sanity check and calculate pins number
-	 */
-	list = of_get_property(np, "plxtech,pins", &size);
-	/* we do not check return since it's safe node passed down */
-	size /= sizeof(*list);
-	if (!size || size % 4) {
-		dev_err(info->dev, "wrong pins number or pins and configs"
-			" should be divisible by 4\n");
-		return -EINVAL;
-	}
-
-	grp->npins = size / 4;
-	pin = grp->pins_conf = devm_kzalloc(info->dev,
-				grp->npins * sizeof(struct oxnas_pmx_pin),
-				GFP_KERNEL);
-	grp->pins = devm_kzalloc(info->dev, grp->npins * sizeof(unsigned int),
-				GFP_KERNEL);
-	if (!grp->pins_conf || !grp->pins)
-		return -ENOMEM;
-
-	for (i = 0, j = 0; i < size; i += 4, j++) {
-		pin->bank = be32_to_cpu(*list++);
-		pin->pin = be32_to_cpu(*list++);
-		grp->pins[j] = pin->bank * MAX_NB_GPIO_PER_BANK + pin->pin;
-		pin->mux = be32_to_cpu(*list++);
-		pin->conf = be32_to_cpu(*list++);
-
-		oxnas_pin_dbg(info->dev, pin);
-		pin++;
-	}
-
-	return 0;
-}
-
-static int oxnas_pinctrl_parse_functions(struct device_node *np,
-					struct oxnas_pinctrl *info, u32 index)
-{
-	struct device_node *child;
-	struct oxnas_pmx_func *func;
-	struct oxnas_pin_group *grp;
-	int ret;
-	static u32 grp_index;
-	u32 i = 0;
-
-	dev_dbg(info->dev, "parse function(%d): %s\n", index, np->name);
-
-	func = &info->functions[index];
-
-	/* Initialise function */
-	func->name = np->name;
-	func->ngroups = of_get_child_count(np);
-	if (func->ngroups <= 0) {
-		dev_err(info->dev, "no groups defined\n");
-		return -EINVAL;
-	}
-	func->groups = devm_kzalloc(info->dev,
-			func->ngroups * sizeof(char *), GFP_KERNEL);
-	if (!func->groups)
-		return -ENOMEM;
-
-	for_each_child_of_node(np, child) {
-		func->groups[i] = child->name;
-		grp = &info->groups[grp_index++];
-		ret = oxnas_pinctrl_parse_groups(child, grp, info, i++);
-		if (ret)
-			return ret;
-	}
-
-	return 0;
-}
-
-static struct of_device_id oxnas_pinctrl_of_match[] = {
-	{ .compatible = "plxtech,nas782x-pinctrl"},
-	{ /* sentinel */ }
-};
-
-static int oxnas_pinctrl_probe_dt(struct platform_device *pdev,
-				 struct oxnas_pinctrl *info)
-{
-	int ret = 0;
-	int i, j;
-	uint32_t *tmp;
-	struct device_node *np = pdev->dev.of_node;
-	struct device_node *child;
-
-	if (!np)
-		return -ENODEV;
-
-	info->dev = &pdev->dev;
-
-	oxnas_pinctrl_child_count(info, np);
-
-	if (info->nbanks < 1) {
-		dev_err(&pdev->dev, "you need to specify atleast one gpio-controller\n");
-		return -EINVAL;
-	}
-
-	ret = oxnas_pinctrl_mux_mask(info, np);
-	if (ret)
-		return ret;
-
-	dev_dbg(&pdev->dev, "nmux = %d\n", info->nmux);
-
-	dev_dbg(&pdev->dev, "mux-mask\n");
-	tmp = info->mux_mask;
-	for (i = 0; i < info->nbanks; i++)
-		for (j = 0; j < info->nmux; j++, tmp++)
-			dev_dbg(&pdev->dev, "%d:%d\t0x%x\n", i, j, tmp[0]);
-
-	dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions);
-	dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups);
-	info->functions = devm_kzalloc(&pdev->dev, info->nfunctions *
-						sizeof(struct oxnas_pmx_func),
-					GFP_KERNEL);
-	if (!info->functions)
-		return -ENOMEM;
-
-	info->groups = devm_kzalloc(&pdev->dev, info->ngroups *
-					sizeof(struct oxnas_pin_group),
-				    GFP_KERNEL);
-	if (!info->groups)
-		return -ENOMEM;
-
-	dev_dbg(&pdev->dev, "nbanks = %d\n", info->nbanks);
-	dev_dbg(&pdev->dev, "nfunctions = %d\n", info->nfunctions);
-	dev_dbg(&pdev->dev, "ngroups = %d\n", info->ngroups);
-
-	i = 0;
-
-	for_each_child_of_node(np, child) {
-		if (of_device_is_compatible(child, gpio_compat))
-			continue;
-		ret = oxnas_pinctrl_parse_functions(child, info, i++);
-		if (ret) {
-			dev_err(&pdev->dev, "failed to parse function\n");
-			return ret;
-		}
-	}
-
-	return 0;
-}
-
-static int oxnas_pinctrl_probe(struct platform_device *pdev)
-{
-	struct oxnas_pinctrl *info;
-	struct pinctrl_pin_desc *pdesc;
-	int ret, i, j, k;
-
-	info = devm_kzalloc(&pdev->dev, sizeof(*info), GFP_KERNEL);
-	if (!info)
-		return -ENOMEM;
-
-	ret = oxnas_pinctrl_probe_dt(pdev, info);
-	if (ret)
-		return ret;
-
-	/*
-	 * We need all the GPIO drivers to probe FIRST, or we will not be able
-	 * to obtain references to the struct gpio_chip * for them, and we
-	 * need this to proceed.
-	 */
-	for (i = 0; i < info->nbanks; i++) {
-		if (!gpio_chips[i]) {
-			dev_warn(&pdev->dev,
-				 "GPIO chip %d not registered yet\n", i);
-			devm_kfree(&pdev->dev, info);
-			return -EPROBE_DEFER;
-		}
-	}
-
-	oxnas_pinctrl_desc.name = dev_name(&pdev->dev);
-	oxnas_pinctrl_desc.npins = info->nbanks * MAX_NB_GPIO_PER_BANK;
-	oxnas_pinctrl_desc.pins = pdesc =
-		devm_kzalloc(&pdev->dev, sizeof(*pdesc) *
-				oxnas_pinctrl_desc.npins, GFP_KERNEL);
-
-	if (!oxnas_pinctrl_desc.pins)
-		return -ENOMEM;
-
-	for (i = 0 , k = 0; i < info->nbanks; i++) {
-		for (j = 0; j < MAX_NB_GPIO_PER_BANK; j++, k++) {
-			pdesc->number = k;
-			pdesc->name = kasprintf(GFP_KERNEL, "MF_%c%d", i + 'A',
-						j);
-			pdesc++;
-		}
-	}
-
-	platform_set_drvdata(pdev, info);
-	info->pctl = pinctrl_register(&oxnas_pinctrl_desc, &pdev->dev, info);
-
-	if (!info->pctl) {
-		dev_err(&pdev->dev, "could not register OX820 pinctrl driver\n");
-		ret = -EINVAL;
-		goto err;
-	}
-
-	/* We will handle a range of GPIO pins */
-	for (i = 0; i < info->nbanks; i++)
-		pinctrl_add_gpio_range(info->pctl, &gpio_chips[i]->range);
-
-	dev_info(&pdev->dev, "initialized OX820 pinctrl driver\n");
-
-	return 0;
-
-err:
-	return ret;
-}
-
-static int oxnas_pinctrl_remove(struct platform_device *pdev)
-{
-	struct oxnas_pinctrl *info = platform_get_drvdata(pdev);
-
-	pinctrl_unregister(info->pctl);
-
-	return 0;
-}
-
-static int oxnas_gpio_request(struct gpio_chip *chip, unsigned offset)
-{
-	/*
-	 * Map back to global GPIO space and request muxing, the direction
-	 * parameter does not matter for this controller.
-	 */
-	int gpio = chip->base + offset;
-	int bank = chip->base / chip->ngpio;
-
-	dev_dbg(chip->dev, "%s:%d MF_%c%d(%d)\n", __func__, __LINE__,
-		'A' + bank, offset, gpio);
-
-	return pinctrl_request_gpio(gpio);
-}
-
-static void oxnas_gpio_free(struct gpio_chip *chip, unsigned offset)
-{
-	int gpio = chip->base + offset;
-
-	pinctrl_free_gpio(gpio);
-}
-
-static int oxnas_gpio_direction_input(struct gpio_chip *chip, unsigned offset)
-{
-	struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip);
-	void __iomem *pio = oxnas_gpio->regbase;
-
-	writel_relaxed(BIT(offset), pio + OUTPUT_EN_CLEAR);
-	return 0;
-}
-
-static int oxnas_gpio_get(struct gpio_chip *chip, unsigned offset)
-{
-	struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip);
-	void __iomem *pio = oxnas_gpio->regbase;
-	unsigned mask = 1 << offset;
-	u32 pdsr;
-
-	pdsr = readl_relaxed(pio + INPUT_VALUE);
-	return (pdsr & mask) != 0;
-}
-
-static void oxnas_gpio_set(struct gpio_chip *chip, unsigned offset,
-				int val)
-{
-	struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip);
-	void __iomem *pio = oxnas_gpio->regbase;
-
-	if (val)
-		writel_relaxed(BIT(offset), pio + OUTPUT_SET);
-	else
-		writel_relaxed(BIT(offset), pio + OUTPUT_CLEAR);
-
-}
-
-static int oxnas_gpio_direction_output(struct gpio_chip *chip, unsigned offset,
-				int val)
-{
-	struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip);
-	void __iomem *pio = oxnas_gpio->regbase;
-
-	if (val)
-		writel_relaxed(BIT(offset), pio + OUTPUT_SET);
-	else
-		writel_relaxed(BIT(offset), pio + OUTPUT_CLEAR);
-
-	writel_relaxed(BIT(offset), pio + OUTPUT_EN_SET);
-
-	return 0;
-}
-
-static int oxnas_gpio_to_irq(struct gpio_chip *chip, unsigned offset)
-{
-	struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip);
-	int virq;
-
-	if (offset < chip->ngpio)
-		virq = irq_create_mapping(oxnas_gpio->domain, offset);
-	else
-		virq = -ENXIO;
-
-	dev_dbg(chip->dev, "%s: request IRQ for GPIO %d, return %d\n",
-				chip->label, offset + chip->base, virq);
-	return virq;
-}
-
-#ifdef CONFIG_DEBUG_FS
-static void oxnas_gpio_dbg_show(struct seq_file *s, struct gpio_chip *chip)
-{
-	enum oxnas_mux mode;
-	int i;
-	struct oxnas_gpio_chip *oxnas_gpio = to_oxnas_gpio_chip(chip);
-	void __iomem *pio = oxnas_gpio->regbase;
-	void __iomem *cio = oxnas_gpio->ctrlbase;
-
-	for (i = 0; i < chip->ngpio; i++) {
-		unsigned pin = chip->base + i;
-		unsigned mask = pin_to_mask(pin);
-		const char *gpio_label;
-		u32 pdsr;
-
-		gpio_label = gpiochip_is_requested(chip, i);
-		if (!gpio_label)
-			continue;
-		/* FIXME */
-		mode = oxnas_mux_get_func(cio, mask);
-		seq_printf(s, "[%s] GPIO%s%d: ",
-			   gpio_label, chip->label, i);
-		if (mode == OXNAS_PINMUX_GPIO) {
-			pdsr = readl_relaxed(pio + INPUT_VALUE);
-
-			seq_printf(s, "[gpio] %s\n",
-				   pdsr & mask ?
-				   "set" : "clear");
-		} else {
-			seq_printf(s, "[periph %c]\n",
-				   mode + 'A' - 1);
-		}
-	}
-}
-#else
-#define oxnas_gpio_dbg_show	NULL
-#endif
-
-/* Several AIC controller irqs are dispatched through this GPIO handler.
- * To use any AT91_PIN_* as an externally triggered IRQ, first call
- * oxnas_set_gpio_input() then maybe enable its glitch filter.
- * Then just request_irq() with the pin ID; it works like any ARM IRQ
- * handler.
- */
-
-static void gpio_irq_mask(struct irq_data *d)
-{
-	struct oxnas_gpio_chip *oxnas_gpio = irq_data_get_irq_chip_data(d);
-	void __iomem	*pio = oxnas_gpio->regbase;
-	unsigned	mask = 1 << d->hwirq;
-	unsigned	type = irqd_get_trigger_type(d);
-	unsigned long	flags;
-
-	if (!(type & IRQ_TYPE_EDGE_BOTH))
-		return;
-
-	spin_lock_irqsave(&oxnas_gpio->lock, flags);
-	if (type & IRQ_TYPE_EDGE_RISING)
-		oxnas_register_clear_mask(pio + RE_IRQ_ENABLE, mask);
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		oxnas_register_clear_mask(pio + FE_IRQ_ENABLE, mask);
-	spin_unlock_irqrestore(&oxnas_gpio->lock, flags);
-}
-
-static void gpio_irq_unmask(struct irq_data *d)
-{
-	struct oxnas_gpio_chip *oxnas_gpio = irq_data_get_irq_chip_data(d);
-	void __iomem	*pio = oxnas_gpio->regbase;
-	unsigned	mask = 1 << d->hwirq;
-	unsigned	type = irqd_get_trigger_type(d);
-	unsigned long	flags;
-
-	if (!(type & IRQ_TYPE_EDGE_BOTH))
-		return;
-
-	spin_lock_irqsave(&oxnas_gpio->lock, flags);
-	if (type & IRQ_TYPE_EDGE_RISING)
-		oxnas_register_set_mask(pio + RE_IRQ_ENABLE, mask);
-	if (type & IRQ_TYPE_EDGE_FALLING)
-		oxnas_register_set_mask(pio + FE_IRQ_ENABLE, mask);
-	spin_unlock_irqrestore(&oxnas_gpio->lock, flags);
-}
-
-
-static int gpio_irq_type(struct irq_data *d, unsigned type)
-{
-	if ((type & IRQ_TYPE_EDGE_BOTH) == 0) {
-		pr_warn("OX820: Unsupported type for irq %d\n",
-			gpio_to_irq(d->irq));
-		return -EINVAL;
-	}
-	/* seems no way to set trigger type without enable irq, so leave it to unmask time */
-
-	return 0;
-}
-
-static struct irq_chip gpio_irqchip = {
-	.name		= "GPIO",
-	.irq_disable	= gpio_irq_mask,
-	.irq_mask	= gpio_irq_mask,
-	.irq_unmask	= gpio_irq_unmask,
-	.irq_set_type	= gpio_irq_type,
-};
-
-static void gpio_irq_handler(struct irq_desc *desc)
-{
-	struct irq_chip *chip = irq_desc_get_chip(desc);
-	struct irq_data *idata = irq_desc_get_irq_data(desc);
-	struct oxnas_gpio_chip *oxnas_gpio = irq_data_get_irq_chip_data(idata);
-	void __iomem *pio = oxnas_gpio->regbase;
-	unsigned long isr;
-	int n;
-
-	chained_irq_enter(chip, desc);
-	for (;;) {
-		/* TODO: see if it works */
-		isr = readl_relaxed(pio + IRQ_PENDING);
-		if (!isr)
-			break;
-		/* acks pending interrupts */
-		writel_relaxed(isr, pio + IRQ_PENDING);
-
-		for_each_set_bit(n, &isr, BITS_PER_LONG) {
-			generic_handle_irq(irq_find_mapping(oxnas_gpio->domain,
-							    n));
-		}
-	}
-	chained_irq_exit(chip, desc);
-	/* now it may re-trigger */
-}
-
-/*
- * This lock class tells lockdep that GPIO irqs are in a different
- * category than their parents, so it won't report false recursion.
- */
-static struct lock_class_key gpio_lock_class;
-
-static int oxnas_gpio_irq_map(struct irq_domain *h, unsigned int virq,
-			      irq_hw_number_t hw)
-{
-	struct oxnas_gpio_chip *oxnas_gpio = h->host_data;
-
-	irq_set_lockdep_class(virq, &gpio_lock_class);
-
-	irq_set_chip_and_handler(virq, &gpio_irqchip, handle_edge_irq);
-	irq_set_chip_data(virq, oxnas_gpio);
-
-	return 0;
-}
-
-static int oxnas_gpio_irq_domain_xlate(struct irq_domain *d,
-				       struct device_node *ctrlr,
-				       const u32 *intspec,
-				       unsigned int intsize,
-				       irq_hw_number_t *out_hwirq,
-				       unsigned int *out_type)
-{
-	struct oxnas_gpio_chip *oxnas_gpio = d->host_data;
-	int ret;
-	int pin = oxnas_gpio->chip.base + intspec[0];
-
-	if (WARN_ON(intsize < 2))
-		return -EINVAL;
-	*out_hwirq = intspec[0];
-	*out_type = intspec[1] & IRQ_TYPE_SENSE_MASK;
-
-	ret = gpio_request(pin, ctrlr->full_name);
-	if (ret)
-		return ret;
-
-	ret = gpio_direction_input(pin);
-	if (ret)
-		return ret;
-
-	return 0;
-}
-
-static struct irq_domain_ops oxnas_gpio_ops = {
-	.map	= oxnas_gpio_irq_map,
-	.xlate	= oxnas_gpio_irq_domain_xlate,
-};
-
-static int oxnas_gpio_of_irq_setup(struct device_node *node,
-				   struct oxnas_gpio_chip *oxnas_gpio,
-				   unsigned int irq)
-{
-	/* Disable irqs of this controller */
-	writel_relaxed(0, oxnas_gpio->regbase + RE_IRQ_ENABLE);
-	writel_relaxed(0, oxnas_gpio->regbase + FE_IRQ_ENABLE);
-
-	/* Setup irq domain */
-	oxnas_gpio->domain = irq_domain_add_linear(node, oxnas_gpio->chip.ngpio,
-						   &oxnas_gpio_ops, oxnas_gpio);
-	if (!oxnas_gpio->domain)
-		panic("oxnas_gpio: couldn't allocate irq domain (DT).\n");
-
-	irq_set_chip_data(irq, oxnas_gpio);
-	irq_set_chained_handler(irq, gpio_irq_handler);
-
-	return 0;
-}
-
-/* This structure is replicated for each GPIO block allocated at probe time */
-static struct gpio_chip oxnas_gpio_template = {
-	.request		= oxnas_gpio_request,
-	.free			= oxnas_gpio_free,
-	.direction_input	= oxnas_gpio_direction_input,
-	.get			= oxnas_gpio_get,
-	.direction_output	= oxnas_gpio_direction_output,
-	.set			= oxnas_gpio_set,
-	.to_irq			= oxnas_gpio_to_irq,
-	.dbg_show		= oxnas_gpio_dbg_show,
-	.can_sleep		= 0,
-	.ngpio			= MAX_NB_GPIO_PER_BANK,
-};
-
-static struct of_device_id oxnas_gpio_of_match[] = {
-	{ .compatible = "plxtech,nas782x-gpio"},
-	{ /* sentinel */ }
-};
-
-static int oxnas_gpio_probe(struct platform_device *pdev)
-{
-	struct device_node *np = pdev->dev.of_node;
-	struct resource *res;
-	struct oxnas_gpio_chip *oxnas_chip = NULL;
-	struct gpio_chip *chip;
-	struct pinctrl_gpio_range *range;
-	int ret = 0;
-	int irq, i;
-	int alias_idx = of_alias_get_id(np, "gpio");
-	uint32_t ngpio;
-	char **names;
-
-	BUG_ON(alias_idx >= ARRAY_SIZE(gpio_chips));
-	if (gpio_chips[alias_idx]) {
-		ret = -EBUSY;
-		goto err;
-	}
-
-	irq = platform_get_irq(pdev, 0);
-	if (irq < 0) {
-		ret = irq;
-		goto err;
-	}
-
-	oxnas_chip = devm_kzalloc(&pdev->dev, sizeof(*oxnas_chip), GFP_KERNEL);
-	if (!oxnas_chip) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-	oxnas_chip->regbase = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(oxnas_chip->regbase)) {
-		ret = PTR_ERR(oxnas_chip->regbase);
-		goto err;
-	}
-
-	res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
-	oxnas_chip->ctrlbase = devm_ioremap_resource(&pdev->dev, res);
-	if (IS_ERR(oxnas_chip->ctrlbase)) {
-		ret = PTR_ERR(oxnas_chip->ctrlbase);
-		goto err;
-	}
-
-	oxnas_chip->chip = oxnas_gpio_template;
-
-	spin_lock_init(&oxnas_chip->lock);
-
-	chip = &oxnas_chip->chip;
-	chip->of_node = np;
-	chip->label = dev_name(&pdev->dev);
-	chip->dev = &pdev->dev;
-	chip->owner = THIS_MODULE;
-	chip->base = alias_idx * MAX_NB_GPIO_PER_BANK;
-
-	if (!of_property_read_u32(np, "#gpio-lines", &ngpio)) {
-		if (ngpio > MAX_NB_GPIO_PER_BANK)
-			pr_err("oxnas_gpio.%d, gpio-nb >= %d failback to %d\n",
-			       alias_idx, MAX_NB_GPIO_PER_BANK,
-			       MAX_NB_GPIO_PER_BANK);
-		else
-			chip->ngpio = ngpio;
-	}
-
-	names = devm_kzalloc(&pdev->dev, sizeof(char *) * chip->ngpio,
-			     GFP_KERNEL);
-
-	if (!names) {
-		ret = -ENOMEM;
-		goto err;
-	}
-
-	for (i = 0; i < chip->ngpio; i++)
-		names[i] = kasprintf(GFP_KERNEL, "MF_%c%d", alias_idx + 'A', i);
-
-	chip->names = (const char *const *)names;
-
-	range = &oxnas_chip->range;
-	range->name = chip->label;
-	range->id = alias_idx;
-	range->pin_base = range->base = range->id * MAX_NB_GPIO_PER_BANK;
-
-	range->npins = chip->ngpio;
-	range->gc = chip;
-
-	ret = gpiochip_add(chip);
-	if (ret)
-		goto err;
-
-	gpio_chips[alias_idx] = oxnas_chip;
-	gpio_banks = max(gpio_banks, alias_idx + 1);
-
-	oxnas_gpio_of_irq_setup(np, oxnas_chip, irq);
-
-	dev_info(&pdev->dev, "at address %p\n", oxnas_chip->regbase);
-
-	return 0;
-err:
-	dev_err(&pdev->dev, "Failure %i for GPIO %i\n", ret, alias_idx);
-
-	return ret;
-}
-
-static struct platform_driver oxnas_gpio_driver = {
-	.driver = {
-		.name = "gpio-oxnas",
-		.owner = THIS_MODULE,
-		.of_match_table = of_match_ptr(oxnas_gpio_of_match),
-	},
-	.probe = oxnas_gpio_probe,
-};
-
-static struct platform_driver oxnas_pinctrl_driver = {
-	.driver = {
-		.name = "pinctrl-oxnas",
-		.owner = THIS_MODULE,
-		.of_match_table = of_match_ptr(oxnas_pinctrl_of_match),
-	},
-	.probe = oxnas_pinctrl_probe,
-	.remove = oxnas_pinctrl_remove,
-};
-
-static int __init oxnas_pinctrl_init(void)
-{
-	int ret;
-
-	ret = platform_driver_register(&oxnas_gpio_driver);
-	if (ret)
-		return ret;
-	return platform_driver_register(&oxnas_pinctrl_driver);
-}
-arch_initcall(oxnas_pinctrl_init);
-
-static void __exit oxnas_pinctrl_exit(void)
-{
-	platform_driver_unregister(&oxnas_pinctrl_driver);
-}
-
-module_exit(oxnas_pinctrl_exit);
-MODULE_AUTHOR("Ma Hajun <mahaijuns@gmail.com>");
-MODULE_DESCRIPTION("Plxtech Nas782x pinctrl driver");
-MODULE_LICENSE("GPL v2");
diff --git a/target/linux/oxnas/files/drivers/reset/reset-ox820.c b/target/linux/oxnas/files/drivers/reset/reset-ox820.c
deleted file mode 100644
index 0a28de55f4..0000000000
--- a/target/linux/oxnas/files/drivers/reset/reset-ox820.c
+++ /dev/null
@@ -1,107 +0,0 @@
-/*
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- */
-
-#include <linux/err.h>
-#include <linux/io.h>
-#include <linux/module.h>
-#include <linux/of.h>
-#include <linux/platform_device.h>
-#include <linux/reset-controller.h>
-#include <linux/slab.h>
-#include <linux/types.h>
-#include <mach/hardware.h>
-
-static int ox820_reset_reset(struct reset_controller_dev *rcdev,
-			      unsigned long id)
-{
-	writel(BIT(id), SYS_CTRL_RST_SET_CTRL);
-	writel(BIT(id), SYS_CTRL_RST_CLR_CTRL);
-	return 0;
-}
-
-static int ox820_reset_assert(struct reset_controller_dev *rcdev,
-			      unsigned long id)
-{
-	writel(BIT(id), SYS_CTRL_RST_SET_CTRL);
-
-	return 0;
-}
-
-static int ox820_reset_deassert(struct reset_controller_dev *rcdev,
-				unsigned long id)
-{
-	writel(BIT(id), SYS_CTRL_RST_CLR_CTRL);
-
-	return 0;
-}
-
-static struct reset_control_ops ox820_reset_ops = {
-	.reset		= ox820_reset_reset,
-	.assert		= ox820_reset_assert,
-	.deassert	= ox820_reset_deassert,
-};
-
-static const struct of_device_id ox820_reset_dt_ids[] = {
-	 { .compatible = "plxtech,nas782x-reset", },
-	 { /* sentinel */ },
-};
-MODULE_DEVICE_TABLE(of, ox820_reset_dt_ids);
-
-struct reset_controller_dev rcdev;
-
-static int ox820_reset_probe(struct platform_device *pdev)
-{
-	struct reset_controller_dev *rcdev;
-
-	rcdev = devm_kzalloc(&pdev->dev, sizeof(*rcdev), GFP_KERNEL);
-	if (!rcdev)
-		return -ENOMEM;
-
-	/* note: reset controller is statically mapped */
-
-	rcdev->owner = THIS_MODULE;
-	rcdev->nr_resets = 32;
-	rcdev->ops = &ox820_reset_ops;
-	rcdev->of_node = pdev->dev.of_node;
-	reset_controller_register(rcdev);
-	platform_set_drvdata(pdev, rcdev);
-
-	return 0;
-}
-
-static int ox820_reset_remove(struct platform_device *pdev)
-{
-	struct reset_controller_dev *rcdev = platform_get_drvdata(pdev);
-
-	reset_controller_unregister(rcdev);
-
-	return 0;
-}
-
-static struct platform_driver ox820_reset_driver = {
-	.probe	= ox820_reset_probe,
-	.remove	= ox820_reset_remove,
-	.driver = {
-		.name		= "ox820-reset",
-		.owner		= THIS_MODULE,
-		.of_match_table	= ox820_reset_dt_ids,
-	},
-};
-
-static int __init ox820_reset_init(void)
-{
-	return platform_driver_probe(&ox820_reset_driver,
-				     ox820_reset_probe);
-}
-/*
- * reset controller does not support probe deferral, so it has to be
- * initialized before any user, in particular, PCIE uses subsys_initcall.
- */
-arch_initcall(ox820_reset_init);
-
-MODULE_AUTHOR("Ma Haijun");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c b/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c
deleted file mode 100644
index 15578a3027..0000000000
--- a/target/linux/oxnas/files/drivers/usb/host/ehci-oxnas.c
+++ /dev/null
@@ -1,316 +0,0 @@
-/*
- * drivers/usb/host/ehci-oxnas.c
- *
- * Tzachi Perelstein <tzachi@marvell.com>
- *
- * This file is licensed under  the terms of the GNU General Public
- * License version 2. This program is licensed "as is" without any
- * warranty of any kind, whether express or implied.
- */
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/platform_device.h>
-#include <linux/of.h>
-#include <linux/of_address.h>
-#include <linux/of_irq.h>
-#include <linux/usb.h>
-#include <linux/usb/hcd.h>
-#include <linux/dma-mapping.h>
-#include <linux/clk.h>
-#include <linux/reset.h>
-#include <mach/hardware.h>
-#include <mach/utils.h>
-
-#include "ehci.h"
-
-struct oxnas_hcd {
-	struct clk *clk;
-	struct clk *refsrc;
-	struct clk *phyref;
-	int use_pllb;
-	int use_phya;
-	struct reset_control *rst_host;
-	struct reset_control *rst_phya;
-	struct reset_control *rst_phyb;
-};
-
-#define DRIVER_DESC "Oxnas On-Chip EHCI Host Controller"
-
-static struct hc_driver __read_mostly oxnas_hc_driver;
-
-static void start_oxnas_usb_ehci(struct oxnas_hcd *oxnas)
-{
-	u32 reg;
-
-	if (oxnas->use_pllb) {
-		/* enable pllb */
-		clk_prepare_enable(oxnas->refsrc);
-		/* enable ref600 */
-		clk_prepare_enable(oxnas->phyref);
-		/* 600MHz pllb divider for 12MHz */
-		writel(PLLB_DIV_INT(50) | PLLB_DIV_FRAC(0),
-			SEC_CTRL_PLLB_DIV_CTRL);
-
-	} else {
-		/* ref 300 divider for 12MHz */
-		writel(REF300_DIV_INT(25) | REF300_DIV_FRAC(0),
-			SYS_CTRL_REF300_DIV);
-	}
-
-	/* Ensure the USB block is properly reset */
-	reset_control_reset(oxnas->rst_host);
-	reset_control_reset(oxnas->rst_phya);
-	reset_control_reset(oxnas->rst_phyb);
-
-	/* Force the high speed clock to be generated all the time, via serial
-	 programming of the USB HS PHY */
-	writel((2UL << USBHSPHY_TEST_ADD) |
-		   (0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
-
-	writel((1UL << USBHSPHY_TEST_CLK) |
-		   (2UL << USBHSPHY_TEST_ADD) |
-		   (0xe0UL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
-
-	writel((0xfUL << USBHSPHY_TEST_ADD) |
-		   (0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
-
-	writel((1UL << USBHSPHY_TEST_CLK) |
-		   (0xfUL << USBHSPHY_TEST_ADD) |
-		   (0xaaUL << USBHSPHY_TEST_DIN), SYS_CTRL_USBHSPHY_CTRL);
-
-	if (oxnas->use_pllb) /* use pllb clock */
-		writel(USB_CLK_INTERNAL | USB_INT_CLK_PLLB, SYS_CTRL_USB_CTRL);
-	else /* use ref300 derived clock */
-		writel(USB_CLK_INTERNAL | USB_INT_CLK_REF300,
-			SYS_CTRL_USB_CTRL);
-
-	if (oxnas->use_phya) {
-		/* Configure USB PHYA as a host */
-		reg = readl(SYS_CTRL_USB_CTRL);
-		reg &= ~USBAMUX_DEVICE;
-		writel(reg, SYS_CTRL_USB_CTRL);
-	}
-
-	/* Enable the clock to the USB block */
-	clk_prepare_enable(oxnas->clk);
-}
-
-static void stop_oxnas_usb_ehci(struct oxnas_hcd *oxnas)
-{
-	reset_control_assert(oxnas->rst_host);
-	reset_control_assert(oxnas->rst_phya);
-	reset_control_assert(oxnas->rst_phyb);
-
-	if (oxnas->use_pllb) {
-		clk_disable_unprepare(oxnas->phyref);
-		clk_disable_unprepare(oxnas->refsrc);
-	}
-	clk_disable_unprepare(oxnas->clk);
-}
-
-static int ehci_oxnas_reset(struct usb_hcd *hcd)
-{
-	#define  txttfill_tuning	reserved2[0]
-
-	struct ehci_hcd	*ehci;
-	u32 tmp;
-	int retval = ehci_setup(hcd);
-	if (retval)
-		return retval;
-
-	ehci = hcd_to_ehci(hcd);
-	tmp = ehci_readl(ehci, &ehci->regs->txfill_tuning);
-	tmp &= ~0x00ff0000;
-	tmp |= 0x003f0000; /* set burst pre load count to 0x40 (63 * 4 bytes)  */
-	tmp |= 0x16; /* set sheduler overhead to 22 * 1.267us (HS) or 22 * 6.33us (FS/LS)*/
-	ehci_writel(ehci, tmp,  &ehci->regs->txfill_tuning);
-
-	tmp = ehci_readl(ehci, &ehci->regs->txttfill_tuning);
-	tmp |= 0x2; /* set sheduler overhead to 2 * 6.333us */
-	ehci_writel(ehci, tmp,  &ehci->regs->txttfill_tuning);
-
-	return retval;
-}
-
-static int ehci_oxnas_drv_probe(struct platform_device *ofdev)
-{
-	struct device_node *np = ofdev->dev.of_node;
-	struct usb_hcd *hcd;
-	struct ehci_hcd *ehci;
-	struct resource res;
-	struct oxnas_hcd *oxnas;
-	int irq, err;
-	struct reset_control *rstc;
-
-	if (usb_disabled())
-		return -ENODEV;
-
-	if (!ofdev->dev.dma_mask)
-		ofdev->dev.dma_mask = &ofdev->dev.coherent_dma_mask;
-	if (!ofdev->dev.coherent_dma_mask)
-		ofdev->dev.coherent_dma_mask = DMA_BIT_MASK(32);
-
-	hcd = usb_create_hcd(&oxnas_hc_driver,	&ofdev->dev,
-					dev_name(&ofdev->dev));
-	if (!hcd)
-		return -ENOMEM;
-
-	err = of_address_to_resource(np, 0, &res);
-	if (err)
-		goto err_res;
-
-	hcd->rsrc_start = res.start;
-	hcd->rsrc_len = resource_size(&res);
-
-	hcd->regs = devm_ioremap_resource(&ofdev->dev, &res);
-	if (IS_ERR(hcd->regs)) {
-		dev_err(&ofdev->dev, "devm_ioremap_resource failed\n");
-		err = PTR_ERR(hcd->regs);
-		goto err_ioremap;
-	}
-
-	oxnas = (struct oxnas_hcd *)hcd_to_ehci(hcd)->priv;
-
-	oxnas->use_pllb = of_property_read_bool(np, "plxtech,ehci_use_pllb");
-	oxnas->use_phya = of_property_read_bool(np, "plxtech,ehci_use_phya");
-
-	oxnas->clk = of_clk_get_by_name(np, "usb");
-	if (IS_ERR(oxnas->clk)) {
-		err = PTR_ERR(oxnas->clk);
-		goto err_clk;
-	}
-
-	if (oxnas->use_pllb) {
-		oxnas->refsrc = of_clk_get_by_name(np, "refsrc");
-		if (IS_ERR(oxnas->refsrc)) {
-			err = PTR_ERR(oxnas->refsrc);
-			goto err_refsrc;
-		}
-		oxnas->phyref = of_clk_get_by_name(np, "phyref");
-		if (IS_ERR(oxnas->refsrc)) {
-			err = PTR_ERR(oxnas->refsrc);
-			goto err_phyref;
-		}
-
-	} else {
-		oxnas->refsrc = NULL;
-		oxnas->phyref = NULL;
-	}
-
-	rstc = devm_reset_control_get(&ofdev->dev, "host");
-	if (IS_ERR(rstc)) {
-		err = PTR_ERR(rstc);
-		goto err_rst;
-	}
-	oxnas->rst_host = rstc;
-
-	rstc = devm_reset_control_get(&ofdev->dev, "phya");
-	if (IS_ERR(rstc)) {
-		err = PTR_ERR(rstc);
-		goto err_rst;
-	}
-	oxnas->rst_phya = rstc;
-
-	rstc = devm_reset_control_get(&ofdev->dev, "phyb");
-	if (IS_ERR(rstc)) {
-		err = PTR_ERR(rstc);
-		goto err_rst;
-	}
-	oxnas->rst_phyb = rstc;
-
-	irq = irq_of_parse_and_map(np, 0);
-	if (!irq) {
-		dev_err(&ofdev->dev, "irq_of_parse_and_map failed\n");
-		err = -EBUSY;
-		goto err_irq;
-	}
-
-	hcd->has_tt = 1;
-	ehci = hcd_to_ehci(hcd);
-	ehci->caps = hcd->regs;
-
-	start_oxnas_usb_ehci(oxnas);
-
-	err = usb_add_hcd(hcd, irq, IRQF_SHARED);
-	if (err)
-		goto err_hcd;
-
-	return 0;
-
-err_hcd:
-	stop_oxnas_usb_ehci(oxnas);
-err_irq:
-err_rst:
-	if (oxnas->phyref)
-		clk_put(oxnas->phyref);
-err_phyref:
-	if (oxnas->refsrc)
-		clk_put(oxnas->refsrc);
-err_refsrc:
-	clk_put(oxnas->clk);
-err_clk:
-err_ioremap:
-err_res:
-	usb_put_hcd(hcd);
-
-	return err;
-}
-
-static int ehci_oxnas_drv_remove(struct platform_device *pdev)
-{
-	struct usb_hcd *hcd = platform_get_drvdata(pdev);
-	struct oxnas_hcd *oxnas = (struct oxnas_hcd *)hcd_to_ehci(hcd)->priv;
-
-	usb_remove_hcd(hcd);
-	if (oxnas->use_pllb) {
-		clk_disable_unprepare(oxnas->phyref);
-		clk_put(oxnas->phyref);
-		clk_disable_unprepare(oxnas->refsrc);
-		clk_put(oxnas->refsrc);
-	}
-	clk_disable_unprepare(oxnas->clk);
-	usb_put_hcd(hcd);
-
-	return 0;
-}
-
-static const struct of_device_id oxnas_ehci_dt_ids[] = {
-	{ .compatible = "plxtech,nas782x-ehci" },
-	{ /* sentinel */ }
-};
-
-MODULE_DEVICE_TABLE(of, oxnas_ehci_dt_ids);
-
-static struct platform_driver ehci_oxnas_driver = {
-	.probe		= ehci_oxnas_drv_probe,
-	.remove		= ehci_oxnas_drv_remove,
-	.shutdown	= usb_hcd_platform_shutdown,
-	.driver.name	= "oxnas-ehci",
-	.driver.of_match_table	= oxnas_ehci_dt_ids,
-};
-
-static const struct ehci_driver_overrides oxnas_overrides __initconst = {
-	.reset = ehci_oxnas_reset,
-	.extra_priv_size = sizeof(struct oxnas_hcd),
-};
-
-static int __init ehci_oxnas_init(void)
-{
-	if (usb_disabled())
-		return -ENODEV;
-
-	ehci_init_driver(&oxnas_hc_driver, &oxnas_overrides);
-	return platform_driver_register(&ehci_oxnas_driver);
-}
-module_init(ehci_oxnas_init);
-
-static void __exit ehci_oxnas_cleanup(void)
-{
-	platform_driver_unregister(&ehci_oxnas_driver);
-}
-module_exit(ehci_oxnas_cleanup);
-
-MODULE_DESCRIPTION(DRIVER_DESC);
-MODULE_ALIAS("platform:oxnas-ehci");
-MODULE_LICENSE("GPL");
diff --git a/target/linux/oxnas/image/Makefile b/target/linux/oxnas/image/Makefile
deleted file mode 100644
index bfa0f0cca7..0000000000
--- a/target/linux/oxnas/image/Makefile
+++ /dev/null
@@ -1,107 +0,0 @@
-#
-# Copyright (C) 2013-2016 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/image.mk
-
-UBIFS_OPTS = -m 2048 -e 126KiB -c 4096
-
-DEVICE_VARS += DTS UBIFS_OPTS
-
-KERNEL_LOADADDR := 0x60008000
-
-define Build/ubootable
-	(dd if="$(STAGING_DIR_IMAGE)/u-boot.bin" bs=128k conv=sync; \
-	 dd if="$@" bs=128k conv=sync ) >> $@.new
-	@mv "$@.new" "$@"
-endef
-
-define Device/Default
-  KERNEL_DEPENDS = $$(wildcard $$(DTS_DIR)/ox820-$$(DTS).dts)
-  KERNEL = kernel-bin | lzma | fit lzma $$(DTS_DIR)/ox820-$$(DTS).dtb
-  KERNEL_NAME := zImage
-  KERNEL_SUFFIX := -uImage
-  KERNEL_INSTALL := 1
-  KERNEL_INITRAMFS = kernel-bin | lzma | fit lzma $$(DTS_DIR)/ox820-$$(DTS).dtb | ubootable
-  KERNEL_INITRAMFS_PREFIX = $$(IMAGE_PREFIX)-u-boot-initramfs
-  KERNEL_INITRAMFS_SUFFIX := .bin
-  BLOCKSIZE := 128k
-  PAGESIZE := 2048
-  SUBPAGESIZE := 512
-  FILESYSTEMS := squashfs ubifs
-  PROFILES = Default $$(DTS)
-  IMAGES := ubinized.bin sysupgrade.tar
-  IMAGE/ubinized.bin := append-ubi
-  IMAGE/sysupgrade.tar := sysupgrade-tar | append-metadata
-  KERNEL_IN_UBI := 1
-  UBOOTENV_IN_UBI := 1
-endef
-
-define Device/akitio
-  DTS := akitio
-  DEVICE_TITLE := Akitio MyCloud mini / Silverstone DC01
-  DEVICE_PACKAGES := kmod-i2c-gpio kmod-rtc-ds1307
-endef
-TARGET_DEVICES += akitio
-
-define Build/omninas-factory
-	rm -rf $@.tmp $@.dummy $@.dummy.gz
-	mkdir -p $@.tmp
-	$(CP) $@ $@.tmp/uImage
-	dd if=/dev/zero bs=64k count=4 of=$@.dummy
-	gzip $@.dummy
-	mkimage -A arm -T ramdisk -C gzip -n "dummy" \
-		-d $@.dummy.gz \
-		$@.tmp/rdimg.gz
-	echo 2.35.20140102 > $@.tmp/version ; echo >> $@.tmp/version
-	chmod 0744 $@.tmp/*
-	$(TAR) -C $@.tmp -czvf $@ \
-		$(if $(SOURCE_DATE_EPOCH),--mtime="@$(SOURCE_DATE_EPOCH)") .
-endef
-
-define Build/encrypt-3des
-	openssl enc -des3 -a -k $(1) -in $@ -out $@.new && mv $@.new $@
-endef
-
-define Device/kd20
-  DEVICE_DTS := ox820-kd20
-  DEVICE_TITLE := Shuttle KD20
-  KERNEL := kernel-bin | append-dtb | uImage none
-  KERNEL_INITRAMFS_PREFIX = $$(IMAGE_PREFIX)-factory
-  KERNEL_INITRAMFS_SUFFIX := .tar.gz
-  KERNEL_INITRAMFS = kernel-bin | append-dtb | uImage none | omninas-factory | encrypt-3des sohmuntitnlaes
-  KERNEL_IMAGE := zImage
-  DEVICE_PACKAGES := kmod-usb3 kmod-i2c-gpio kmod-rtc-pcf8563 kmod-gpio-beeper \
-                     kmod-hwmon-core kmod-hwmon-gpiofan \
-                     kmod-md-mod kmod-md-raid0 kmod-md-raid1 kmod-fs-ext4 kmod-fs-xfs
-  KERNEL_IN_UBI := 
-  UBOOTENV_IN_UBI := 
-endef
-TARGET_DEVICES += kd20
-
-define Device/pogoplug-pro
-  DTS := pogoplug-pro
-  DEVICE_TITLE := Cloud Engines Pogoplug Pro (with mPCIe)
-endef
-TARGET_DEVICES += pogoplug-pro
-
-define Device/pogoplug-v3
-  DTS := pogoplug-v3
-  DEVICE_TITLE := Cloud Engines Pogoplug V3 (no mPCIe)
-endef
-TARGET_DEVICES += pogoplug-v3
-
-define Device/stg212
-  DTS := stg212
-  DEVICE_TITLE := MitraStar STG-212
-endef
-TARGET_DEVICES += stg212
-
-VMLINUX:=$(BIN_DIR)/$(IMG_PREFIX)-vmlinux
-UIMAGE:=$(BIN_DIR)/$(IMG_PREFIX)-uImage
-
-$(eval $(call BuildImage))
diff --git a/target/linux/oxnas/modules.mk b/target/linux/oxnas/modules.mk
deleted file mode 100644
index 7016398619..0000000000
--- a/target/linux/oxnas/modules.mk
+++ /dev/null
@@ -1,41 +0,0 @@
-#
-# Copyright (C) 2006-2014 OpenWrt.org
-# Copyright (C) 2016 LEDE project
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define KernelPackage/ata-oxnas-sata
-  SUBMENU:=$(BLOCK_MENU)
-  TITLE:=oxnas Serial ATA support
-  KCONFIG:=CONFIG_SATA_OXNAS
-  DEPENDS:=@TARGET_oxnas
-  FILES:=$(LINUX_DIR)/drivers/ata/sata_oxnas.ko
-  AUTOLOAD:=$(call AutoLoad,41,sata_oxnas,1)
-  $(call AddDepends/ata)
-endef
-
-define KernelPackage/ata-oxnas-sata/description
- SATA support for OX934 core found in the OX82x/PLX782x SoCs
-endef
-
-$(eval $(call KernelPackage,ata-oxnas-sata))
-
-
-define KernelPackage/usb2-oxnas
-  SUBMENU:=$(BLOCK_MENU)
-  TITLE:=OXNAS USB controller driver
-  DEPENDS:=@TARGET_oxnas +kmod-usb2
-  KCONFIG:=CONFIG_USB_EHCI_OXNAS
-  FILES:=$(LINUX_DIR)/drivers/usb/host/ehci-oxnas.ko
-  AUTOLOAD:=$(call AutoLoad,55,ehci-oxnas,1)
-  $(call AddDepends/usb)
-endef
-
-define KernelPackage/usb2-oxnas/description
- This driver provides USB Device Controller support for the
- EHCI USB host built-in to the PLXTECH NAS782x SoC
-endef
-
-$(eval $(call KernelPackage,usb2-oxnas))
diff --git a/target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch b/target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch
deleted file mode 100644
index 204d6e0bc7..0000000000
--- a/target/linux/oxnas/patches-4.4/0072-mtd-backport-v4.7-0day-patches-from-Boris.patch
+++ /dev/null
@@ -1,5281 +0,0 @@
-From a369af5149e6eb442b22ce89b564dd7a76e03638 Mon Sep 17 00:00:00 2001
-From: John Crispin <blogic@openwrt.org>
-Date: Tue, 26 Apr 2016 19:05:01 +0200
-Subject: [PATCH 072/102] mtd: backport v4.7-0day patches from Boris
-
-Signed-off-by: John Crispin <blogic@openwrt.org>
----
- drivers/mtd/Kconfig                 |    4 +-
- drivers/mtd/cmdlinepart.c           |    3 +-
- drivers/mtd/devices/m25p80.c        |   44 +--
- drivers/mtd/maps/physmap_of.c       |    6 +-
- drivers/mtd/mtdchar.c               |  123 ++++++--
- drivers/mtd/mtdconcat.c             |    2 +-
- drivers/mtd/mtdcore.c               |  428 ++++++++++++++++++++++++--
- drivers/mtd/mtdcore.h               |    7 +-
- drivers/mtd/mtdpart.c               |  161 ++++++----
- drivers/mtd/mtdswap.c               |   24 +-
- drivers/mtd/nand/Kconfig            |   21 +-
- drivers/mtd/nand/Makefile           |    2 +
- drivers/mtd/nand/nand_base.c        |  571 +++++++++++++++++++----------------
- drivers/mtd/nand/nand_bbt.c         |   34 +--
- drivers/mtd/nand/nand_bch.c         |   52 ++--
- drivers/mtd/nand/nand_ecc.c         |    6 +-
- drivers/mtd/nand/nand_ids.c         |    4 +-
- drivers/mtd/nand/nandsim.c          |   43 +--
- drivers/mtd/ofpart.c                |   53 ++--
- drivers/mtd/spi-nor/Kconfig         |   10 +-
- drivers/mtd/spi-nor/Makefile        |    1 +
- drivers/mtd/spi-nor/mtk-quadspi.c   |  485 +++++++++++++++++++++++++++++
- drivers/mtd/spi-nor/spi-nor.c       |  321 +++++++++++++-------
- drivers/mtd/tests/mtd_nandecctest.c |    2 +-
- drivers/mtd/tests/oobtest.c         |   49 ++-
- drivers/mtd/tests/pagetest.c        |    3 +-
- include/linux/mtd/bbm.h             |    1 -
- include/linux/mtd/fsmc.h            |   18 --
- include/linux/mtd/inftl.h           |    1 -
- include/linux/mtd/map.h             |    9 +-
- include/linux/mtd/mtd.h             |   80 ++++-
- include/linux/mtd/nand.h            |   94 ++++--
- include/linux/mtd/nand_bch.h        |   10 +-
- include/linux/mtd/nftl.h            |    1 -
- include/linux/mtd/onenand.h         |    2 -
- include/linux/mtd/partitions.h      |   27 +-
- include/linux/mtd/sh_flctl.h        |    4 +-
- include/linux/mtd/sharpsl.h         |    2 +-
- include/linux/mtd/spi-nor.h         |   23 +-
- include/uapi/mtd/mtd-abi.h          |    2 +-
- 45 files changed, 2077 insertions(+), 748 deletions(-)
- create mode 100644 drivers/mtd/spi-nor/mtk-quadspi.c
-
---- a/drivers/mtd/Kconfig
-+++ b/drivers/mtd/Kconfig
-@@ -131,7 +131,7 @@ config MTD_CMDLINE_PARTS
- 
- config MTD_AFS_PARTS
- 	tristate "ARM Firmware Suite partition parsing"
--	depends on ARM
-+	depends on (ARM || ARM64)
- 	---help---
- 	  The ARM Firmware Suite allows the user to divide flash devices into
- 	  multiple 'images'. Each such image has a header containing its name
-@@ -161,7 +161,7 @@ config MTD_AR7_PARTS
- 
- config MTD_BCM63XX_PARTS
- 	tristate "BCM63XX CFE partitioning support"
--	depends on BCM63XX
-+	depends on BCM63XX || BMIPS_GENERIC || COMPILE_TEST
- 	select CRC32
- 	help
- 	  This provides partions parsing for BCM63xx devices with CFE
---- a/drivers/mtd/cmdlinepart.c
-+++ b/drivers/mtd/cmdlinepart.c
-@@ -304,7 +304,7 @@ static int mtdpart_setup_real(char *s)
-  * the first one in the chain if a NULL mtd_id is passed in.
-  */
- static int parse_cmdline_partitions(struct mtd_info *master,
--				    struct mtd_partition **pparts,
-+				    const struct mtd_partition **pparts,
- 				    struct mtd_part_parser_data *data)
- {
- 	unsigned long long offset;
-@@ -382,7 +382,6 @@ static int __init mtdpart_setup(char *s)
- __setup("mtdparts=", mtdpart_setup);
- 
- static struct mtd_part_parser cmdline_parser = {
--	.owner = THIS_MODULE,
- 	.parse_fn = parse_cmdline_partitions,
- 	.name = "cmdlinepart",
- };
---- a/drivers/mtd/devices/m25p80.c
-+++ b/drivers/mtd/devices/m25p80.c
-@@ -174,22 +174,6 @@ static int m25p80_read(struct spi_nor *n
- 	return 0;
- }
- 
--static int m25p80_erase(struct spi_nor *nor, loff_t offset)
--{
--	struct m25p *flash = nor->priv;
--
--	dev_dbg(nor->dev, "%dKiB at 0x%08x\n",
--		flash->spi_nor.mtd.erasesize / 1024, (u32)offset);
--
--	/* Set up command buffer. */
--	flash->command[0] = nor->erase_opcode;
--	m25p_addr2cmd(nor, offset, flash->command);
--
--	spi_write(flash->spi, flash->command, m25p_cmdsz(nor));
--
--	return 0;
--}
--
- /*
-  * board specific setup should have ensured the SPI clock used here
-  * matches what the READ command supports, at least until this driver
-@@ -197,12 +181,11 @@ static int m25p80_erase(struct spi_nor *
-  */
- static int m25p_probe(struct spi_device *spi)
- {
--	struct mtd_part_parser_data	ppdata;
- 	struct flash_platform_data	*data;
- 	struct m25p *flash;
- 	struct spi_nor *nor;
- 	enum read_mode mode = SPI_NOR_NORMAL;
--	char *flash_name = NULL;
-+	char *flash_name;
- 	int ret;
- 
- 	data = dev_get_platdata(&spi->dev);
-@@ -216,12 +199,11 @@ static int m25p_probe(struct spi_device
- 	/* install the hooks */
- 	nor->read = m25p80_read;
- 	nor->write = m25p80_write;
--	nor->erase = m25p80_erase;
- 	nor->write_reg = m25p80_write_reg;
- 	nor->read_reg = m25p80_read_reg;
- 
- 	nor->dev = &spi->dev;
--	nor->flash_node = spi->dev.of_node;
-+	spi_nor_set_flash_node(nor, spi->dev.of_node);
- 	nor->priv = flash;
- 
- 	spi_set_drvdata(spi, flash);
-@@ -242,6 +224,8 @@ static int m25p_probe(struct spi_device
- 	 */
- 	if (data && data->type)
- 		flash_name = data->type;
-+	else if (!strcmp(spi->modalias, "spi-nor"))
-+		flash_name = NULL; /* auto-detect */
- 	else
- 		flash_name = spi->modalias;
- 
-@@ -249,11 +233,8 @@ static int m25p_probe(struct spi_device
- 	if (ret)
- 		return ret;
- 
--	ppdata.of_node = spi->dev.of_node;
--
--	return mtd_device_parse_register(&nor->mtd, NULL, &ppdata,
--			data ? data->parts : NULL,
--			data ? data->nr_parts : 0);
-+	return mtd_device_register(&nor->mtd, data ? data->parts : NULL,
-+				   data ? data->nr_parts : 0);
- }
- 
- 
-@@ -279,14 +260,21 @@ static int m25p_remove(struct spi_device
-  */
- static const struct spi_device_id m25p_ids[] = {
- 	/*
-+	 * Allow non-DT platform devices to bind to the "spi-nor" modalias, and
-+	 * hack around the fact that the SPI core does not provide uevent
-+	 * matching for .of_match_table
-+	 */
-+	{"spi-nor"},
-+
-+	/*
- 	 * Entries not used in DTs that should be safe to drop after replacing
--	 * them with "nor-jedec" in platform data.
-+	 * them with "spi-nor" in platform data.
- 	 */
- 	{"s25sl064a"},	{"w25x16"},	{"m25p10"},	{"m25px64"},
- 
- 	/*
--	 * Entries that were used in DTs without "nor-jedec" fallback and should
--	 * be kept for backward compatibility.
-+	 * Entries that were used in DTs without "jedec,spi-nor" fallback and
-+	 * should be kept for backward compatibility.
- 	 */
- 	{"at25df321a"},	{"at25df641"},	{"at26df081a"},
- 	{"mr25h256"},
---- a/drivers/mtd/maps/physmap_of.c
-+++ b/drivers/mtd/maps/physmap_of.c
-@@ -128,7 +128,6 @@ static int of_flash_probe(struct platfor
- 	int reg_tuple_size;
- 	struct mtd_info **mtd_list = NULL;
- 	resource_size_t res_size;
--	struct mtd_part_parser_data ppdata;
- 	bool map_indirect;
- 	const char *mtd_name = NULL;
- 
-@@ -272,8 +271,9 @@ static int of_flash_probe(struct platfor
- 	if (err)
- 		goto err_out;
- 
--	ppdata.of_node = dp;
--	mtd_device_parse_register(info->cmtd, part_probe_types_def, &ppdata,
-+	info->cmtd->dev.parent = &dev->dev;
-+	mtd_set_of_node(info->cmtd, dp);
-+	mtd_device_parse_register(info->cmtd, part_probe_types_def, NULL,
- 			NULL, 0);
- 
- 	kfree(mtd_list);
---- a/drivers/mtd/mtdchar.c
-+++ b/drivers/mtd/mtdchar.c
-@@ -465,38 +465,111 @@ static int mtdchar_readoob(struct file *
- }
- 
- /*
-- * Copies (and truncates, if necessary) data from the larger struct,
-- * nand_ecclayout, to the smaller, deprecated layout struct,
-- * nand_ecclayout_user. This is necessary only to support the deprecated
-- * API ioctl ECCGETLAYOUT while allowing all new functionality to use
-- * nand_ecclayout flexibly (i.e. the struct may change size in new
-- * releases without requiring major rewrites).
-+ * Copies (and truncates, if necessary) OOB layout information to the
-+ * deprecated layout struct, nand_ecclayout_user. This is necessary only to
-+ * support the deprecated API ioctl ECCGETLAYOUT while allowing all new
-+ * functionality to use mtd_ooblayout_ops flexibly (i.e. mtd_ooblayout_ops
-+ * can describe any kind of OOB layout with almost zero overhead from a
-+ * memory usage point of view).
-  */
--static int shrink_ecclayout(const struct nand_ecclayout *from,
--		struct nand_ecclayout_user *to)
-+static int shrink_ecclayout(struct mtd_info *mtd,
-+			    struct nand_ecclayout_user *to)
- {
--	int i;
-+	struct mtd_oob_region oobregion;
-+	int i, section = 0, ret;
- 
--	if (!from || !to)
-+	if (!mtd || !to)
- 		return -EINVAL;
- 
- 	memset(to, 0, sizeof(*to));
- 
--	to->eccbytes = min((int)from->eccbytes, MTD_MAX_ECCPOS_ENTRIES);
--	for (i = 0; i < to->eccbytes; i++)
--		to->eccpos[i] = from->eccpos[i];
-+	to->eccbytes = 0;
-+	for (i = 0; i < MTD_MAX_ECCPOS_ENTRIES;) {
-+		u32 eccpos;
-+
-+		ret = mtd_ooblayout_ecc(mtd, section, &oobregion);
-+		if (ret < 0) {
-+			if (ret != -ERANGE)
-+				return ret;
-+
-+			break;
-+		}
-+
-+		eccpos = oobregion.offset;
-+		for (; i < MTD_MAX_ECCPOS_ENTRIES &&
-+		       eccpos < oobregion.offset + oobregion.length; i++) {
-+			to->eccpos[i] = eccpos++;
-+			to->eccbytes++;
-+		}
-+	}
- 
- 	for (i = 0; i < MTD_MAX_OOBFREE_ENTRIES; i++) {
--		if (from->oobfree[i].length == 0 &&
--				from->oobfree[i].offset == 0)
-+		ret = mtd_ooblayout_free(mtd, i, &oobregion);
-+		if (ret < 0) {
-+			if (ret != -ERANGE)
-+				return ret;
-+
- 			break;
--		to->oobavail += from->oobfree[i].length;
--		to->oobfree[i] = from->oobfree[i];
-+		}
-+
-+		to->oobfree[i].offset = oobregion.offset;
-+		to->oobfree[i].length = oobregion.length;
-+		to->oobavail += to->oobfree[i].length;
- 	}
- 
- 	return 0;
- }
- 
-+static int get_oobinfo(struct mtd_info *mtd, struct nand_oobinfo *to)
-+{
-+	struct mtd_oob_region oobregion;
-+	int i, section = 0, ret;
-+
-+	if (!mtd || !to)
-+		return -EINVAL;
-+
-+	memset(to, 0, sizeof(*to));
-+
-+	to->eccbytes = 0;
-+	for (i = 0; i < ARRAY_SIZE(to->eccpos);) {
-+		u32 eccpos;
-+
-+		ret = mtd_ooblayout_ecc(mtd, section, &oobregion);
-+		if (ret < 0) {
-+			if (ret != -ERANGE)
-+				return ret;
-+
-+			break;
-+		}
-+
-+		if (oobregion.length + i > ARRAY_SIZE(to->eccpos))
-+			return -EINVAL;
-+
-+		eccpos = oobregion.offset;
-+		for (; eccpos < oobregion.offset + oobregion.length; i++) {
-+			to->eccpos[i] = eccpos++;
-+			to->eccbytes++;
-+		}
-+	}
-+
-+	for (i = 0; i < 8; i++) {
-+		ret = mtd_ooblayout_free(mtd, i, &oobregion);
-+		if (ret < 0) {
-+			if (ret != -ERANGE)
-+				return ret;
-+
-+			break;
-+		}
-+
-+		to->oobfree[i][0] = oobregion.offset;
-+		to->oobfree[i][1] = oobregion.length;
-+	}
-+
-+	to->useecc = MTD_NANDECC_AUTOPLACE;
-+
-+	return 0;
-+}
-+
- static int mtdchar_blkpg_ioctl(struct mtd_info *mtd,
- 			       struct blkpg_ioctl_arg *arg)
- {
-@@ -815,16 +888,12 @@ static int mtdchar_ioctl(struct file *fi
- 	{
- 		struct nand_oobinfo oi;
- 
--		if (!mtd->ecclayout)
-+		if (!mtd->ooblayout)
- 			return -EOPNOTSUPP;
--		if (mtd->ecclayout->eccbytes > ARRAY_SIZE(oi.eccpos))
--			return -EINVAL;
- 
--		oi.useecc = MTD_NANDECC_AUTOPLACE;
--		memcpy(&oi.eccpos, mtd->ecclayout->eccpos, sizeof(oi.eccpos));
--		memcpy(&oi.oobfree, mtd->ecclayout->oobfree,
--		       sizeof(oi.oobfree));
--		oi.eccbytes = mtd->ecclayout->eccbytes;
-+		ret = get_oobinfo(mtd, &oi);
-+		if (ret)
-+			return ret;
- 
- 		if (copy_to_user(argp, &oi, sizeof(struct nand_oobinfo)))
- 			return -EFAULT;
-@@ -913,14 +982,14 @@ static int mtdchar_ioctl(struct file *fi
- 	{
- 		struct nand_ecclayout_user *usrlay;
- 
--		if (!mtd->ecclayout)
-+		if (!mtd->ooblayout)
- 			return -EOPNOTSUPP;
- 
- 		usrlay = kmalloc(sizeof(*usrlay), GFP_KERNEL);
- 		if (!usrlay)
- 			return -ENOMEM;
- 
--		shrink_ecclayout(mtd->ecclayout, usrlay);
-+		shrink_ecclayout(mtd, usrlay);
- 
- 		if (copy_to_user(argp, usrlay, sizeof(*usrlay)))
- 			ret = -EFAULT;
---- a/drivers/mtd/mtdconcat.c
-+++ b/drivers/mtd/mtdconcat.c
-@@ -777,7 +777,7 @@ struct mtd_info *mtd_concat_create(struc
- 
- 	}
- 
--	concat->mtd.ecclayout = subdev[0]->ecclayout;
-+	mtd_set_ooblayout(&concat->mtd, subdev[0]->ooblayout);
- 
- 	concat->num_subdev = num_devs;
- 	concat->mtd.name = name;
---- a/drivers/mtd/mtdcore.c
-+++ b/drivers/mtd/mtdcore.c
-@@ -32,6 +32,7 @@
- #include <linux/err.h>
- #include <linux/ioctl.h>
- #include <linux/init.h>
-+#include <linux/of.h>
- #include <linux/proc_fs.h>
- #include <linux/idr.h>
- #include <linux/backing-dev.h>
-@@ -446,6 +447,7 @@ int add_mtd_device(struct mtd_info *mtd)
- 	mtd->dev.devt = MTD_DEVT(i);
- 	dev_set_name(&mtd->dev, "mtd%d", i);
- 	dev_set_drvdata(&mtd->dev, mtd);
-+	of_node_get(mtd_get_of_node(mtd));
- 	error = device_register(&mtd->dev);
- 	if (error)
- 		goto fail_added;
-@@ -477,6 +479,7 @@ int add_mtd_device(struct mtd_info *mtd)
- 	return 0;
- 
- fail_added:
-+	of_node_put(mtd_get_of_node(mtd));
- 	idr_remove(&mtd_idr, i);
- fail_locked:
- 	mutex_unlock(&mtd_table_mutex);
-@@ -518,6 +521,7 @@ int del_mtd_device(struct mtd_info *mtd)
- 		device_unregister(&mtd->dev);
- 
- 		idr_remove(&mtd_idr, mtd->index);
-+		of_node_put(mtd_get_of_node(mtd));
- 
- 		module_put(THIS_MODULE);
- 		ret = 0;
-@@ -529,9 +533,10 @@ out_error:
- }
- 
- static int mtd_add_device_partitions(struct mtd_info *mtd,
--				     struct mtd_partition *real_parts,
--				     int nbparts)
-+				     struct mtd_partitions *parts)
- {
-+	const struct mtd_partition *real_parts = parts->parts;
-+	int nbparts = parts->nr_parts;
- 	int ret;
- 
- 	if (nbparts == 0 || IS_ENABLED(CONFIG_MTD_PARTITIONED_MASTER)) {
-@@ -600,29 +605,29 @@ int mtd_device_parse_register(struct mtd
- 			      const struct mtd_partition *parts,
- 			      int nr_parts)
- {
-+	struct mtd_partitions parsed;
- 	int ret;
--	struct mtd_partition *real_parts = NULL;
- 
- 	mtd_set_dev_defaults(mtd);
- 
--	ret = parse_mtd_partitions(mtd, types, &real_parts, parser_data);
--	if (ret <= 0 && nr_parts && parts) {
--		real_parts = kmemdup(parts, sizeof(*parts) * nr_parts,
--				     GFP_KERNEL);
--		if (!real_parts)
--			ret = -ENOMEM;
--		else
--			ret = nr_parts;
--	}
--	/* Didn't come up with either parsed OR fallback partitions */
--	if (ret < 0) {
--		pr_info("mtd: failed to find partitions; one or more parsers reports errors (%d)\n",
-+	memset(&parsed, 0, sizeof(parsed));
-+
-+	ret = parse_mtd_partitions(mtd, types, &parsed, parser_data);
-+	if ((ret < 0 || parsed.nr_parts == 0) && parts && nr_parts) {
-+		/* Fall back to driver-provided partitions */
-+		parsed = (struct mtd_partitions){
-+			.parts		= parts,
-+			.nr_parts	= nr_parts,
-+		};
-+	} else if (ret < 0) {
-+		/* Didn't come up with parsed OR fallback partitions */
-+			pr_info("mtd: failed to find partitions; one or more parsers reports errors (%d)\n",
- 			ret);
- 		/* Don't abort on errors; we can still use unpartitioned MTD */
--		ret = 0;
-+		memset(&parsed, 0, sizeof(parsed));
- 	}
- 
--	ret = mtd_add_device_partitions(mtd, real_parts, ret);
-+	ret = mtd_add_device_partitions(mtd, &parsed);
- 	if (ret)
- 		goto out;
- 
-@@ -642,7 +647,8 @@ int mtd_device_parse_register(struct mtd
- 	}
- 
- out:
--	kfree(real_parts);
-+	/* Cleanup any parsed partitions */
-+	mtd_part_parser_cleanup(&parsed);
- 	return ret;
- }
- EXPORT_SYMBOL_GPL(mtd_device_parse_register);
-@@ -767,7 +773,6 @@ out:
- }
- EXPORT_SYMBOL_GPL(get_mtd_device);
- 
--
- int __get_mtd_device(struct mtd_info *mtd)
- {
- 	int err;
-@@ -1001,6 +1006,366 @@ int mtd_read_oob(struct mtd_info *mtd, l
- }
- EXPORT_SYMBOL_GPL(mtd_read_oob);
- 
-+/**
-+ * mtd_ooblayout_ecc - Get the OOB region definition of a specific ECC section
-+ * @mtd: MTD device structure
-+ * @section: ECC section. Depending on the layout you may have all the ECC
-+ *	     bytes stored in a single contiguous section, or one section
-+ *	     per ECC chunk (and sometime several sections for a single ECC
-+ *	     ECC chunk)
-+ * @oobecc: OOB region struct filled with the appropriate ECC position
-+ *	    information
-+ *
-+ * This functions return ECC section information in the OOB area. I you want
-+ * to get all the ECC bytes information, then you should call
-+ * mtd_ooblayout_ecc(mtd, section++, oobecc) until it returns -ERANGE.
-+ *
-+ * Returns zero on success, a negative error code otherwise.
-+ */
-+int mtd_ooblayout_ecc(struct mtd_info *mtd, int section,
-+		      struct mtd_oob_region *oobecc)
-+{
-+	memset(oobecc, 0, sizeof(*oobecc));
-+
-+	if (!mtd || section < 0)
-+		return -EINVAL;
-+
-+	if (!mtd->ooblayout || !mtd->ooblayout->ecc)
-+		return -ENOTSUPP;
-+
-+	return mtd->ooblayout->ecc(mtd, section, oobecc);
-+}
-+EXPORT_SYMBOL_GPL(mtd_ooblayout_ecc);
-+
-+/**
-+ * mtd_ooblayout_free - Get the OOB region definition of a specific free
-+ *			section
-+ * @mtd: MTD device structure
-+ * @section: Free section you are interested in. Depending on the layout
-+ *	     you may have all the free bytes stored in a single contiguous
-+ *	     section, or one section per ECC chunk plus an extra section
-+ *	     for the remaining bytes (or other funky layout).
-+ * @oobfree: OOB region struct filled with the appropriate free position
-+ *	     information
-+ *
-+ * This functions return free bytes position in the OOB area. I you want
-+ * to get all the free bytes information, then you should call
-+ * mtd_ooblayout_free(mtd, section++, oobfree) until it returns -ERANGE.
-+ *
-+ * Returns zero on success, a negative error code otherwise.
-+ */
-+int mtd_ooblayout_free(struct mtd_info *mtd, int section,
-+		       struct mtd_oob_region *oobfree)
-+{
-+	memset(oobfree, 0, sizeof(*oobfree));
-+
-+	if (!mtd || section < 0)
-+		return -EINVAL;
-+
-+	if (!mtd->ooblayout || !mtd->ooblayout->free)
-+		return -ENOTSUPP;
-+
-+	return mtd->ooblayout->free(mtd, section, oobfree);
-+}
-+EXPORT_SYMBOL_GPL(mtd_ooblayout_free);
-+
-+/**
-+ * mtd_ooblayout_find_region - Find the region attached to a specific byte
-+ * @mtd: mtd info structure
-+ * @byte: the byte we are searching for
-+ * @sectionp: pointer where the section id will be stored
-+ * @oobregion: used to retrieve the ECC position
-+ * @iter: iterator function. Should be either mtd_ooblayout_free or
-+ *	  mtd_ooblayout_ecc depending on the region type you're searching for
-+ *
-+ * This functions returns the section id and oobregion information of a
-+ * specific byte. For example, say you want to know where the 4th ECC byte is
-+ * stored, you'll use:
-+ *
-+ * mtd_ooblayout_find_region(mtd, 3, &section, &oobregion, mtd_ooblayout_ecc);
-+ *
-+ * Returns zero on success, a negative error code otherwise.
-+ */
-+static int mtd_ooblayout_find_region(struct mtd_info *mtd, int byte,
-+				int *sectionp, struct mtd_oob_region *oobregion,
-+				int (*iter)(struct mtd_info *,
-+					    int section,
-+					    struct mtd_oob_region *oobregion))
-+{
-+	int pos = 0, ret, section = 0;
-+
-+	memset(oobregion, 0, sizeof(*oobregion));
-+
-+	while (1) {
-+		ret = iter(mtd, section, oobregion);
-+		if (ret)
-+			return ret;
-+
-+		if (pos + oobregion->length > byte)
-+			break;
-+
-+		pos += oobregion->length;
-+		section++;
-+	}
-+
-+	/*
-+	 * Adjust region info to make it start at the beginning at the
-+	 * 'start' ECC byte.
-+	 */
-+	oobregion->offset += byte - pos;
-+	oobregion->length -= byte - pos;
-+	*sectionp = section;
-+
-+	return 0;
-+}
-+
-+/**
-+ * mtd_ooblayout_find_eccregion - Find the ECC region attached to a specific
-+ *				  ECC byte
-+ * @mtd: mtd info structure
-+ * @eccbyte: the byte we are searching for
-+ * @sectionp: pointer where the section id will be stored
-+ * @oobregion: OOB region information
-+ *
-+ * Works like mtd_ooblayout_find_region() except it searches for a specific ECC
-+ * byte.
-+ *
-+ * Returns zero on success, a negative error code otherwise.
-+ */
-+int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte,
-+				 int *section,
-+				 struct mtd_oob_region *oobregion)
-+{
-+	return mtd_ooblayout_find_region(mtd, eccbyte, section, oobregion,
-+					 mtd_ooblayout_ecc);
-+}
-+EXPORT_SYMBOL_GPL(mtd_ooblayout_find_eccregion);
-+
-+/**
-+ * mtd_ooblayout_get_bytes - Extract OOB bytes from the oob buffer
-+ * @mtd: mtd info structure
-+ * @buf: destination buffer to store OOB bytes
-+ * @oobbuf: OOB buffer
-+ * @start: first byte to retrieve
-+ * @nbytes: number of bytes to retrieve
-+ * @iter: section iterator
-+ *
-+ * Extract bytes attached to a specific category (ECC or free)
-+ * from the OOB buffer and copy them into buf.
-+ *
-+ * Returns zero on success, a negative error code otherwise.
-+ */
-+static int mtd_ooblayout_get_bytes(struct mtd_info *mtd, u8 *buf,
-+				const u8 *oobbuf, int start, int nbytes,
-+				int (*iter)(struct mtd_info *,
-+					    int section,
-+					    struct mtd_oob_region *oobregion))
-+{
-+	struct mtd_oob_region oobregion = { };
-+	int section = 0, ret;
-+
-+	ret = mtd_ooblayout_find_region(mtd, start, &section,
-+					&oobregion, iter);
-+
-+	while (!ret) {
-+		int cnt;
-+
-+		cnt = oobregion.length > nbytes ? nbytes : oobregion.length;
-+		memcpy(buf, oobbuf + oobregion.offset, cnt);
-+		buf += cnt;
-+		nbytes -= cnt;
-+
-+		if (!nbytes)
-+			break;
-+
-+		ret = iter(mtd, ++section, &oobregion);
-+	}
-+
-+	return ret;
-+}
-+
-+/**
-+ * mtd_ooblayout_set_bytes - put OOB bytes into the oob buffer
-+ * @mtd: mtd info structure
-+ * @buf: source buffer to get OOB bytes from
-+ * @oobbuf: OOB buffer
-+ * @start: first OOB byte to set
-+ * @nbytes: number of OOB bytes to set
-+ * @iter: section iterator
-+ *
-+ * Fill the OOB buffer with data provided in buf. The category (ECC or free)
-+ * is selected by passing the appropriate iterator.
-+ *
-+ * Returns zero on success, a negative error code otherwise.
-+ */
-+static int mtd_ooblayout_set_bytes(struct mtd_info *mtd, const u8 *buf,
-+				u8 *oobbuf, int start, int nbytes,
-+				int (*iter)(struct mtd_info *,
-+					    int section,
-+					    struct mtd_oob_region *oobregion))
-+{
-+	struct mtd_oob_region oobregion = { };
-+	int section = 0, ret;
-+
-+	ret = mtd_ooblayout_find_region(mtd, start, &section,
-+					&oobregion, iter);
-+
-+	while (!ret) {
-+		int cnt;
-+
-+		cnt = oobregion.length > nbytes ? nbytes : oobregion.length;
-+		memcpy(oobbuf + oobregion.offset, buf, cnt);
-+		buf += cnt;
-+		nbytes -= cnt;
-+
-+		if (!nbytes)
-+			break;
-+
-+		ret = iter(mtd, ++section, &oobregion);
-+	}
-+
-+	return ret;
-+}
-+
-+/**
-+ * mtd_ooblayout_count_bytes - count the number of bytes in a OOB category
-+ * @mtd: mtd info structure
-+ * @iter: category iterator
-+ *
-+ * Count the number of bytes in a given category.
-+ *
-+ * Returns a positive value on success, a negative error code otherwise.
-+ */
-+static int mtd_ooblayout_count_bytes(struct mtd_info *mtd,
-+				int (*iter)(struct mtd_info *,
-+					    int section,
-+					    struct mtd_oob_region *oobregion))
-+{
-+	struct mtd_oob_region oobregion = { };
-+	int section = 0, ret, nbytes = 0;
-+
-+	while (1) {
-+		ret = iter(mtd, section++, &oobregion);
-+		if (ret) {
-+			if (ret == -ERANGE)
-+				ret = nbytes;
-+			break;
-+		}
-+
-+		nbytes += oobregion.length;
-+	}
-+
-+	return ret;
-+}
-+
-+/**
-+ * mtd_ooblayout_get_eccbytes - extract ECC bytes from the oob buffer
-+ * @mtd: mtd info structure
-+ * @eccbuf: destination buffer to store ECC bytes
-+ * @oobbuf: OOB buffer
-+ * @start: first ECC byte to retrieve
-+ * @nbytes: number of ECC bytes to retrieve
-+ *
-+ * Works like mtd_ooblayout_get_bytes(), except it acts on ECC bytes.
-+ *
-+ * Returns zero on success, a negative error code otherwise.
-+ */
-+int mtd_ooblayout_get_eccbytes(struct mtd_info *mtd, u8 *eccbuf,
-+			       const u8 *oobbuf, int start, int nbytes)
-+{
-+	return mtd_ooblayout_get_bytes(mtd, eccbuf, oobbuf, start, nbytes,
-+				       mtd_ooblayout_ecc);
-+}
-+EXPORT_SYMBOL_GPL(mtd_ooblayout_get_eccbytes);
-+
-+/**
-+ * mtd_ooblayout_set_eccbytes - set ECC bytes into the oob buffer
-+ * @mtd: mtd info structure
-+ * @eccbuf: source buffer to get ECC bytes from
-+ * @oobbuf: OOB buffer
-+ * @start: first ECC byte to set
-+ * @nbytes: number of ECC bytes to set
-+ *
-+ * Works like mtd_ooblayout_set_bytes(), except it acts on ECC bytes.
-+ *
-+ * Returns zero on success, a negative error code otherwise.
-+ */
-+int mtd_ooblayout_set_eccbytes(struct mtd_info *mtd, const u8 *eccbuf,
-+			       u8 *oobbuf, int start, int nbytes)
-+{
-+	return mtd_ooblayout_set_bytes(mtd, eccbuf, oobbuf, start, nbytes,
-+				       mtd_ooblayout_ecc);
-+}
-+EXPORT_SYMBOL_GPL(mtd_ooblayout_set_eccbytes);
-+
-+/**
-+ * mtd_ooblayout_get_databytes - extract data bytes from the oob buffer
-+ * @mtd: mtd info structure
-+ * @databuf: destination buffer to store ECC bytes
-+ * @oobbuf: OOB buffer
-+ * @start: first ECC byte to retrieve
-+ * @nbytes: number of ECC bytes to retrieve
-+ *
-+ * Works like mtd_ooblayout_get_bytes(), except it acts on free bytes.
-+ *
-+ * Returns zero on success, a negative error code otherwise.
-+ */
-+int mtd_ooblayout_get_databytes(struct mtd_info *mtd, u8 *databuf,
-+				const u8 *oobbuf, int start, int nbytes)
-+{
-+	return mtd_ooblayout_get_bytes(mtd, databuf, oobbuf, start, nbytes,
-+				       mtd_ooblayout_free);
-+}
-+EXPORT_SYMBOL_GPL(mtd_ooblayout_get_databytes);
-+
-+/**
-+ * mtd_ooblayout_get_eccbytes - set data bytes into the oob buffer
-+ * @mtd: mtd info structure
-+ * @eccbuf: source buffer to get data bytes from
-+ * @oobbuf: OOB buffer
-+ * @start: first ECC byte to set
-+ * @nbytes: number of ECC bytes to set
-+ *
-+ * Works like mtd_ooblayout_get_bytes(), except it acts on free bytes.
-+ *
-+ * Returns zero on success, a negative error code otherwise.
-+ */
-+int mtd_ooblayout_set_databytes(struct mtd_info *mtd, const u8 *databuf,
-+				u8 *oobbuf, int start, int nbytes)
-+{
-+	return mtd_ooblayout_set_bytes(mtd, databuf, oobbuf, start, nbytes,
-+				       mtd_ooblayout_free);
-+}
-+EXPORT_SYMBOL_GPL(mtd_ooblayout_set_databytes);
-+
-+/**
-+ * mtd_ooblayout_count_freebytes - count the number of free bytes in OOB
-+ * @mtd: mtd info structure
-+ *
-+ * Works like mtd_ooblayout_count_bytes(), except it count free bytes.
-+ *
-+ * Returns zero on success, a negative error code otherwise.
-+ */
-+int mtd_ooblayout_count_freebytes(struct mtd_info *mtd)
-+{
-+	return mtd_ooblayout_count_bytes(mtd, mtd_ooblayout_free);
-+}
-+EXPORT_SYMBOL_GPL(mtd_ooblayout_count_freebytes);
-+
-+/**
-+ * mtd_ooblayout_count_freebytes - count the number of ECC bytes in OOB
-+ * @mtd: mtd info structure
-+ *
-+ * Works like mtd_ooblayout_count_bytes(), except it count ECC bytes.
-+ *
-+ * Returns zero on success, a negative error code otherwise.
-+ */
-+int mtd_ooblayout_count_eccbytes(struct mtd_info *mtd)
-+{
-+	return mtd_ooblayout_count_bytes(mtd, mtd_ooblayout_ecc);
-+}
-+EXPORT_SYMBOL_GPL(mtd_ooblayout_count_eccbytes);
-+
- /*
-  * Method to access the protection register area, present in some flash
-  * devices. The user data is one time programmable but the factory data is read
---- a/drivers/mtd/mtdcore.h
-+++ b/drivers/mtd/mtdcore.h
-@@ -10,10 +10,15 @@ int add_mtd_device(struct mtd_info *mtd)
- int del_mtd_device(struct mtd_info *mtd);
- int add_mtd_partitions(struct mtd_info *, const struct mtd_partition *, int);
- int del_mtd_partitions(struct mtd_info *);
-+
-+struct mtd_partitions;
-+
- int parse_mtd_partitions(struct mtd_info *master, const char * const *types,
--			 struct mtd_partition **pparts,
-+			 struct mtd_partitions *pparts,
- 			 struct mtd_part_parser_data *data);
- 
-+void mtd_part_parser_cleanup(struct mtd_partitions *parts);
-+
- int __init init_mtdchar(void);
- void __exit cleanup_mtdchar(void);
- 
---- a/drivers/mtd/mtdpart.c
-+++ b/drivers/mtd/mtdpart.c
-@@ -55,9 +55,12 @@ static void mtd_partition_split(struct m
- 
- /*
-  * Given a pointer to the MTD object in the mtd_part structure, we can retrieve
-- * the pointer to that structure with this macro.
-+ * the pointer to that structure.
-  */
--#define PART(x)  ((struct mtd_part *)(x))
-+static inline struct mtd_part *mtd_to_part(const struct mtd_info *mtd)
-+{
-+	return container_of(mtd, struct mtd_part, mtd);
-+}
- 
- 
- /*
-@@ -68,7 +71,7 @@ static void mtd_partition_split(struct m
- static int part_read(struct mtd_info *mtd, loff_t from, size_t len,
- 		size_t *retlen, u_char *buf)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	struct mtd_ecc_stats stats;
- 	int res;
- 
-@@ -87,7 +90,7 @@ static int part_read(struct mtd_info *mt
- static int part_point(struct mtd_info *mtd, loff_t from, size_t len,
- 		size_t *retlen, void **virt, resource_size_t *phys)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 
- 	return part->master->_point(part->master, from + part->offset, len,
- 				    retlen, virt, phys);
-@@ -95,7 +98,7 @@ static int part_point(struct mtd_info *m
- 
- static int part_unpoint(struct mtd_info *mtd, loff_t from, size_t len)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 
- 	return part->master->_unpoint(part->master, from + part->offset, len);
- }
-@@ -105,7 +108,7 @@ static unsigned long part_get_unmapped_a
- 					    unsigned long offset,
- 					    unsigned long flags)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 
- 	offset += part->offset;
- 	return part->master->_get_unmapped_area(part->master, len, offset,
-@@ -115,7 +118,7 @@ static unsigned long part_get_unmapped_a
- static int part_read_oob(struct mtd_info *mtd, loff_t from,
- 		struct mtd_oob_ops *ops)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	int res;
- 
- 	if (from >= mtd->size)
-@@ -130,10 +133,7 @@ static int part_read_oob(struct mtd_info
- 	if (ops->oobbuf) {
- 		size_t len, pages;
- 
--		if (ops->mode == MTD_OPS_AUTO_OOB)
--			len = mtd->oobavail;
--		else
--			len = mtd->oobsize;
-+		len = mtd_oobavail(mtd, ops);
- 		pages = mtd_div_by_ws(mtd->size, mtd);
- 		pages -= mtd_div_by_ws(from, mtd);
- 		if (ops->ooboffs + ops->ooblen > pages * len)
-@@ -153,7 +153,7 @@ static int part_read_oob(struct mtd_info
- static int part_read_user_prot_reg(struct mtd_info *mtd, loff_t from,
- 		size_t len, size_t *retlen, u_char *buf)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	return part->master->_read_user_prot_reg(part->master, from, len,
- 						 retlen, buf);
- }
-@@ -161,7 +161,7 @@ static int part_read_user_prot_reg(struc
- static int part_get_user_prot_info(struct mtd_info *mtd, size_t len,
- 				   size_t *retlen, struct otp_info *buf)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	return part->master->_get_user_prot_info(part->master, len, retlen,
- 						 buf);
- }
-@@ -169,7 +169,7 @@ static int part_get_user_prot_info(struc
- static int part_read_fact_prot_reg(struct mtd_info *mtd, loff_t from,
- 		size_t len, size_t *retlen, u_char *buf)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	return part->master->_read_fact_prot_reg(part->master, from, len,
- 						 retlen, buf);
- }
-@@ -177,7 +177,7 @@ static int part_read_fact_prot_reg(struc
- static int part_get_fact_prot_info(struct mtd_info *mtd, size_t len,
- 				   size_t *retlen, struct otp_info *buf)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	return part->master->_get_fact_prot_info(part->master, len, retlen,
- 						 buf);
- }
-@@ -185,7 +185,7 @@ static int part_get_fact_prot_info(struc
- static int part_write(struct mtd_info *mtd, loff_t to, size_t len,
- 		size_t *retlen, const u_char *buf)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	return part->master->_write(part->master, to + part->offset, len,
- 				    retlen, buf);
- }
-@@ -193,7 +193,7 @@ static int part_write(struct mtd_info *m
- static int part_panic_write(struct mtd_info *mtd, loff_t to, size_t len,
- 		size_t *retlen, const u_char *buf)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	return part->master->_panic_write(part->master, to + part->offset, len,
- 					  retlen, buf);
- }
-@@ -201,7 +201,7 @@ static int part_panic_write(struct mtd_i
- static int part_write_oob(struct mtd_info *mtd, loff_t to,
- 		struct mtd_oob_ops *ops)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 
- 	if (to >= mtd->size)
- 		return -EINVAL;
-@@ -213,7 +213,7 @@ static int part_write_oob(struct mtd_inf
- static int part_write_user_prot_reg(struct mtd_info *mtd, loff_t from,
- 		size_t len, size_t *retlen, u_char *buf)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	return part->master->_write_user_prot_reg(part->master, from, len,
- 						  retlen, buf);
- }
-@@ -221,21 +221,21 @@ static int part_write_user_prot_reg(stru
- static int part_lock_user_prot_reg(struct mtd_info *mtd, loff_t from,
- 		size_t len)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	return part->master->_lock_user_prot_reg(part->master, from, len);
- }
- 
- static int part_writev(struct mtd_info *mtd, const struct kvec *vecs,
- 		unsigned long count, loff_t to, size_t *retlen)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	return part->master->_writev(part->master, vecs, count,
- 				     to + part->offset, retlen);
- }
- 
- static int part_erase(struct mtd_info *mtd, struct erase_info *instr)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	int ret;
- 
- 
-@@ -299,7 +299,7 @@ static int part_erase(struct mtd_info *m
- void mtd_erase_callback(struct erase_info *instr)
- {
- 	if (instr->mtd->_erase == part_erase) {
--		struct mtd_part *part = PART(instr->mtd);
-+		struct mtd_part *part = mtd_to_part(instr->mtd);
- 		size_t wrlen = 0;
- 
- 		if (instr->mtd->flags & MTD_ERASE_PARTIAL) {
-@@ -330,13 +330,13 @@ EXPORT_SYMBOL_GPL(mtd_erase_callback);
- 
- static int part_lock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	return part->master->_lock(part->master, ofs + part->offset, len);
- }
- 
- static int part_unlock(struct mtd_info *mtd, loff_t ofs, uint64_t len)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 
- 	ofs += part->offset;
- 	if (mtd->flags & MTD_ERASE_PARTIAL) {
-@@ -349,45 +349,45 @@ static int part_unlock(struct mtd_info *
- 
- static int part_is_locked(struct mtd_info *mtd, loff_t ofs, uint64_t len)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	return part->master->_is_locked(part->master, ofs + part->offset, len);
- }
- 
- static void part_sync(struct mtd_info *mtd)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	part->master->_sync(part->master);
- }
- 
- static int part_suspend(struct mtd_info *mtd)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	return part->master->_suspend(part->master);
- }
- 
- static void part_resume(struct mtd_info *mtd)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	part->master->_resume(part->master);
- }
- 
- static int part_block_isreserved(struct mtd_info *mtd, loff_t ofs)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	ofs += part->offset;
- 	return part->master->_block_isreserved(part->master, ofs);
- }
- 
- static int part_block_isbad(struct mtd_info *mtd, loff_t ofs)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	ofs += part->offset;
- 	return part->master->_block_isbad(part->master, ofs);
- }
- 
- static int part_block_markbad(struct mtd_info *mtd, loff_t ofs)
- {
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	int res;
- 
- 	ofs += part->offset;
-@@ -397,6 +397,27 @@ static int part_block_markbad(struct mtd
- 	return res;
- }
- 
-+static int part_ooblayout_ecc(struct mtd_info *mtd, int section,
-+			      struct mtd_oob_region *oobregion)
-+{
-+	struct mtd_part *part = mtd_to_part(mtd);
-+
-+	return mtd_ooblayout_ecc(part->master, section, oobregion);
-+}
-+
-+static int part_ooblayout_free(struct mtd_info *mtd, int section,
-+			       struct mtd_oob_region *oobregion)
-+{
-+	struct mtd_part *part = mtd_to_part(mtd);
-+
-+	return mtd_ooblayout_free(part->master, section, oobregion);
-+}
-+
-+static const struct mtd_ooblayout_ops part_ooblayout_ops = {
-+	.ecc = part_ooblayout_ecc,
-+	.free = part_ooblayout_free,
-+};
-+
- static inline void free_partition(struct mtd_part *p)
- {
- 	kfree(p->mtd.name);
-@@ -614,7 +635,7 @@ static struct mtd_part *allocate_partiti
- 			slave->mtd.erasesize = slave->mtd.size;
- 	}
- 
--	slave->mtd.ecclayout = master->ecclayout;
-+	mtd_set_ooblayout(&slave->mtd, &part_ooblayout_ops);
- 	slave->mtd.ecc_step_size = master->ecc_step_size;
- 	slave->mtd.ecc_strength = master->ecc_strength;
- 	slave->mtd.bitflip_threshold = master->bitflip_threshold;
-@@ -639,7 +660,7 @@ static ssize_t mtd_partition_offset_show
- 		struct device_attribute *attr, char *buf)
- {
- 	struct mtd_info *mtd = dev_get_drvdata(dev);
--	struct mtd_part *part = PART(mtd);
-+	struct mtd_part *part = mtd_to_part(mtd);
- 	return snprintf(buf, PAGE_SIZE, "%lld\n", part->offset);
- }
- 
-@@ -677,11 +698,10 @@ int mtd_add_partition(struct mtd_info *m
- 	if (length <= 0)
- 		return -EINVAL;
- 
-+	memset(&part, 0, sizeof(part));
- 	part.name = name;
- 	part.size = length;
- 	part.offset = offset;
--	part.mask_flags = 0;
--	part.ecclayout = NULL;
- 
- 	new = allocate_partition(master, &part, -1, offset);
- 	if (IS_ERR(new))
-@@ -845,7 +865,7 @@ int add_mtd_partitions(struct mtd_info *
- static DEFINE_SPINLOCK(part_parser_lock);
- static LIST_HEAD(part_parsers);
- 
--static struct mtd_part_parser *get_partition_parser(const char *name)
-+static struct mtd_part_parser *mtd_part_parser_get(const char *name)
- {
- 	struct mtd_part_parser *p, *ret = NULL;
- 
-@@ -862,7 +882,20 @@ static struct mtd_part_parser *get_parti
- 	return ret;
- }
- 
--#define put_partition_parser(p) do { module_put((p)->owner); } while (0)
-+static inline void mtd_part_parser_put(const struct mtd_part_parser *p)
-+{
-+	module_put(p->owner);
-+}
-+
-+/*
-+ * Many partition parsers just expected the core to kfree() all their data in
-+ * one chunk. Do that by default.
-+ */
-+static void mtd_part_parser_cleanup_default(const struct mtd_partition *pparts,
-+					    int nr_parts)
-+{
-+	kfree(pparts);
-+}
- 
- static struct mtd_part_parser *
- get_partition_parser_by_type(enum mtd_parser_type type,
-@@ -874,7 +907,7 @@ get_partition_parser_by_type(enum mtd_pa
- 
- 	p = list_prepare_entry(start, &part_parsers, list);
- 	if (start)
--		put_partition_parser(start);
-+		mtd_part_parser_put(start);
- 
- 	list_for_each_entry_continue(p, &part_parsers, list) {
- 		if (p->type == type && try_module_get(p->owner)) {
-@@ -888,13 +921,19 @@ get_partition_parser_by_type(enum mtd_pa
- 	return ret;
- }
- 
--void register_mtd_parser(struct mtd_part_parser *p)
--{
-+int __register_mtd_parser(struct mtd_part_parser *p, struct module *owner)
-+ {
-+	p->owner = owner;
-+
-+	if (!p->cleanup)
-+		p->cleanup = &mtd_part_parser_cleanup_default;
-+
- 	spin_lock(&part_parser_lock);
- 	list_add(&p->list, &part_parsers);
- 	spin_unlock(&part_parser_lock);
-+	return 0;
- }
--EXPORT_SYMBOL_GPL(register_mtd_parser);
-+EXPORT_SYMBOL_GPL(__register_mtd_parser);
- 
- void deregister_mtd_parser(struct mtd_part_parser *p)
- {
-@@ -954,7 +993,7 @@ static const char * const default_mtd_pa
-  * parse_mtd_partitions - parse MTD partitions
-  * @master: the master partition (describes whole MTD device)
-  * @types: names of partition parsers to try or %NULL
-- * @pparts: array of partitions found is returned here
-+ * @pparts: info about partitions found is returned here
-  * @data: MTD partition parser-specific data
-  *
-  * This function tries to find partition on MTD device @master. It uses MTD
-@@ -966,45 +1005,42 @@ static const char * const default_mtd_pa
-  *
-  * This function may return:
-  * o a negative error code in case of failure
-- * o zero if no partitions were found
-- * o a positive number of found partitions, in which case on exit @pparts will
-- *   point to an array containing this number of &struct mtd_info objects.
-+ * o zero otherwise, and @pparts will describe the partitions, number of
-+ *   partitions, and the parser which parsed them. Caller must release
-+ *   resources with mtd_part_parser_cleanup() when finished with the returned
-+ *   data.
-  */
- int parse_mtd_partitions(struct mtd_info *master, const char *const *types,
--			 struct mtd_partition **pparts,
-+			 struct mtd_partitions *pparts,
- 			 struct mtd_part_parser_data *data)
- {
- 	struct mtd_part_parser *parser;
- 	int ret, err = 0;
- 	const char *const *types_of = NULL;
- 
--	if (data && data->of_node) {
--		types_of = of_get_probes(data->of_node);
--		if (types_of != NULL)
--			types = types_of;
--	}
--
- 	if (!types)
- 		types = default_mtd_part_types;
- 
- 	for ( ; *types; types++) {
- 		pr_debug("%s: parsing partitions %s\n", master->name, *types);
--		parser = get_partition_parser(*types);
-+		parser = mtd_part_parser_get(*types);
- 		if (!parser && !request_module("%s", *types))
--			parser = get_partition_parser(*types);
-+			parser = mtd_part_parser_get(*types);
- 		pr_debug("%s: got parser %s\n", master->name,
- 			 parser ? parser->name : NULL);
- 		if (!parser)
- 			continue;
--		ret = (*parser->parse_fn)(master, pparts, data);
-+		ret = (*parser->parse_fn)(master, &pparts->parts, data);
- 		pr_debug("%s: parser %s: %i\n",
- 			 master->name, parser->name, ret);
--		put_partition_parser(parser);
- 		if (ret > 0) {
- 			printk(KERN_NOTICE "%d %s partitions found on MTD device %s\n",
- 			       ret, parser->name, master->name);
--			return ret;
-+			pparts->nr_parts = ret;
-+			pparts->parser = parser;
-+			return 0;
- 		}
-+		mtd_part_parser_put(parser);
- 		/*
- 		 * Stash the first error we see; only report it if no parser
- 		 * succeeds
-@@ -1034,7 +1070,7 @@ int parse_mtd_partitions_by_type(struct
- 		ret = (*parser->parse_fn)(master, pparts, data);
- 
- 		if (ret > 0) {
--			put_partition_parser(parser);
-+			mtd_part_parser_put(parser);
- 			printk(KERN_NOTICE
- 			       "%d %s partitions found on MTD device %s\n",
- 			       ret, parser->name, master->name);
-@@ -1048,6 +1084,22 @@ int parse_mtd_partitions_by_type(struct
- }
- EXPORT_SYMBOL_GPL(parse_mtd_partitions_by_type);
- 
-+void mtd_part_parser_cleanup(struct mtd_partitions *parts)
-+{
-+	const struct mtd_part_parser *parser;
-+
-+	if (!parts)
-+		return;
-+
-+	parser = parts->parser;
-+	if (parser) {
-+		if (parser->cleanup)
-+			parser->cleanup(parts->parts, parts->nr_parts);
-+
-+		mtd_part_parser_put(parser);
-+	}
-+}
-+
- int mtd_is_partition(const struct mtd_info *mtd)
- {
- 	struct mtd_part *part;
-@@ -1070,7 +1122,7 @@ struct mtd_info *mtdpart_get_master(cons
- 	if (!mtd_is_partition(mtd))
- 		return (struct mtd_info *)mtd;
- 
--	return PART(mtd)->master;
-+	return mtd_to_part(mtd)->master;
- }
- EXPORT_SYMBOL_GPL(mtdpart_get_master);
- 
-@@ -1079,7 +1131,7 @@ uint64_t mtdpart_get_offset(const struct
- 	if (!mtd_is_partition(mtd))
- 		return 0;
- 
--	return PART(mtd)->offset;
-+	return mtd_to_part(mtd)->offset;
- }
- EXPORT_SYMBOL_GPL(mtdpart_get_offset);
- 
-@@ -1089,6 +1141,6 @@ uint64_t mtd_get_device_size(const struc
- 	if (!mtd_is_partition(mtd))
- 		return mtd->size;
- 
--	return PART(mtd)->master->size;
-+	return mtd_to_part(mtd)->master->size;
- }
- EXPORT_SYMBOL_GPL(mtd_get_device_size);
---- a/drivers/mtd/mtdswap.c
-+++ b/drivers/mtd/mtdswap.c
-@@ -346,7 +346,7 @@ static int mtdswap_read_markers(struct m
- 	if (mtd_can_have_bb(d->mtd) && mtd_block_isbad(d->mtd, offset))
- 		return MTDSWAP_SCANNED_BAD;
- 
--	ops.ooblen = 2 * d->mtd->ecclayout->oobavail;
-+	ops.ooblen = 2 * d->mtd->oobavail;
- 	ops.oobbuf = d->oob_buf;
- 	ops.ooboffs = 0;
- 	ops.datbuf = NULL;
-@@ -359,7 +359,7 @@ static int mtdswap_read_markers(struct m
- 
- 	data = (struct mtdswap_oobdata *)d->oob_buf;
- 	data2 = (struct mtdswap_oobdata *)
--		(d->oob_buf + d->mtd->ecclayout->oobavail);
-+		(d->oob_buf + d->mtd->oobavail);
- 
- 	if (le16_to_cpu(data->magic) == MTDSWAP_MAGIC_CLEAN) {
- 		eb->erase_count = le32_to_cpu(data->count);
-@@ -933,7 +933,7 @@ static unsigned int mtdswap_eblk_passes(
- 
- 	ops.mode = MTD_OPS_AUTO_OOB;
- 	ops.len = mtd->writesize;
--	ops.ooblen = mtd->ecclayout->oobavail;
-+	ops.ooblen = mtd->oobavail;
- 	ops.ooboffs = 0;
- 	ops.datbuf = d->page_buf;
- 	ops.oobbuf = d->oob_buf;
-@@ -945,7 +945,7 @@ static unsigned int mtdswap_eblk_passes(
- 		for (i = 0; i < mtd_pages; i++) {
- 			patt = mtdswap_test_patt(test + i);
- 			memset(d->page_buf, patt, mtd->writesize);
--			memset(d->oob_buf, patt, mtd->ecclayout->oobavail);
-+			memset(d->oob_buf, patt, mtd->oobavail);
- 			ret = mtd_write_oob(mtd, pos, &ops);
- 			if (ret)
- 				goto error;
-@@ -964,7 +964,7 @@ static unsigned int mtdswap_eblk_passes(
- 				if (p1[j] != patt)
- 					goto error;
- 
--			for (j = 0; j < mtd->ecclayout->oobavail; j++)
-+			for (j = 0; j < mtd->oobavail; j++)
- 				if (p2[j] != (unsigned char)patt)
- 					goto error;
- 
-@@ -1387,7 +1387,7 @@ static int mtdswap_init(struct mtdswap_d
- 	if (!d->page_buf)
- 		goto page_buf_fail;
- 
--	d->oob_buf = kmalloc(2 * mtd->ecclayout->oobavail, GFP_KERNEL);
-+	d->oob_buf = kmalloc(2 * mtd->oobavail, GFP_KERNEL);
- 	if (!d->oob_buf)
- 		goto oob_buf_fail;
- 
-@@ -1417,7 +1417,6 @@ static void mtdswap_add_mtd(struct mtd_b
- 	unsigned long part;
- 	unsigned int eblocks, eavailable, bad_blocks, spare_cnt;
- 	uint64_t swap_size, use_size, size_limit;
--	struct nand_ecclayout *oinfo;
- 	int ret;
- 
- 	parts = &partitions[0];
-@@ -1447,17 +1446,10 @@ static void mtdswap_add_mtd(struct mtd_b
- 		return;
- 	}
- 
--	oinfo = mtd->ecclayout;
--	if (!oinfo) {
--		printk(KERN_ERR "%s: mtd%d does not have OOB\n",
--			MTDSWAP_PREFIX, mtd->index);
--		return;
--	}
--
--	if (!mtd->oobsize || oinfo->oobavail < MTDSWAP_OOBSIZE) {
-+	if (!mtd->oobsize || mtd->oobavail < MTDSWAP_OOBSIZE) {
- 		printk(KERN_ERR "%s: Not enough free bytes in OOB, "
- 			"%d available, %zu needed.\n",
--			MTDSWAP_PREFIX, oinfo->oobavail, MTDSWAP_OOBSIZE);
-+			MTDSWAP_PREFIX, mtd->oobavail, MTDSWAP_OOBSIZE);
- 		return;
- 	}
- 
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -55,7 +55,7 @@ config MTD_NAND_DENALI_PCI
- config MTD_NAND_DENALI_DT
- 	tristate "Support Denali NAND controller as a DT device"
- 	select MTD_NAND_DENALI
--	depends on HAS_DMA && HAVE_CLK
-+	depends on HAS_DMA && HAVE_CLK && OF
- 	help
- 	  Enable the driver for NAND flash on platforms using a Denali NAND
- 	  controller as a DT device.
-@@ -74,6 +74,7 @@ config MTD_NAND_DENALI_SCRATCH_REG_ADDR
- config MTD_NAND_GPIO
- 	tristate "GPIO assisted NAND Flash driver"
- 	depends on GPIOLIB || COMPILE_TEST
-+	depends on HAS_IOMEM
- 	help
- 	  This enables a NAND flash driver where control signals are
- 	  connected to GPIO pins, and commands and data are communicated
-@@ -310,6 +311,7 @@ config MTD_NAND_CAFE
- config MTD_NAND_CS553X
- 	tristate "NAND support for CS5535/CS5536 (AMD Geode companion chip)"
- 	depends on X86_32
-+	depends on !UML && HAS_IOMEM
- 	help
- 	  The CS553x companion chips for the AMD Geode processor
- 	  include NAND flash controllers with built-in hardware ECC
-@@ -463,6 +465,7 @@ config MTD_NAND_MPC5121_NFC
- config MTD_NAND_VF610_NFC
- 	tristate "Support for Freescale NFC for VF610/MPC5125"
- 	depends on (SOC_VF610 || COMPILE_TEST)
-+	depends on HAS_IOMEM
- 	help
- 	  Enables support for NAND Flash Controller on some Freescale
- 	  processors like the VF610, MPC5125, MCF54418 or Kinetis K70.
-@@ -480,7 +483,7 @@ config MTD_NAND_MXC
- 
- config MTD_NAND_SH_FLCTL
- 	tristate "Support for NAND on Renesas SuperH FLCTL"
--	depends on SUPERH || ARCH_SHMOBILE || COMPILE_TEST
-+	depends on SUPERH || COMPILE_TEST
- 	depends on HAS_IOMEM
- 	depends on HAS_DMA
- 	help
-@@ -519,6 +522,13 @@ config MTD_NAND_JZ4740
- 	help
- 		Enables support for NAND Flash on JZ4740 SoC based boards.
- 
-+config MTD_NAND_JZ4780
-+	tristate "Support for NAND on JZ4780 SoC"
-+	depends on MACH_JZ4780 && JZ4780_NEMC
-+	help
-+	  Enables support for NAND Flash connected to the NEMC on JZ4780 SoC
-+	  based boards, using the BCH controller for hardware error correction.
-+
- config MTD_NAND_FSMC
- 	tristate "Support for NAND on ST Micros FSMC"
- 	depends on PLAT_SPEAR || ARCH_NOMADIK || ARCH_U8500 || MACH_U300
-@@ -546,4 +556,11 @@ config MTD_NAND_HISI504
- 	help
- 	  Enables support for NAND controller on Hisilicon SoC Hip04.
- 
-+config MTD_NAND_QCOM
-+	tristate "Support for NAND on QCOM SoCs"
-+	depends on ARCH_QCOM
-+	help
-+	  Enables support for NAND flash chips on SoCs containing the EBI2 NAND
-+	  controller. This controller is found on IPQ806x SoC.
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -49,11 +49,13 @@ obj-$(CONFIG_MTD_NAND_MPC5121_NFC)	+= mp
- obj-$(CONFIG_MTD_NAND_VF610_NFC)	+= vf610_nfc.o
- obj-$(CONFIG_MTD_NAND_RICOH)		+= r852.o
- obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740_nand.o
-+obj-$(CONFIG_MTD_NAND_JZ4780)		+= jz4780_nand.o jz4780_bch.o
- obj-$(CONFIG_MTD_NAND_GPMI_NAND)	+= gpmi-nand/
- obj-$(CONFIG_MTD_NAND_XWAY)		+= xway_nand.o
- obj-$(CONFIG_MTD_NAND_BCM47XXNFLASH)	+= bcm47xxnflash/
- obj-$(CONFIG_MTD_NAND_SUNXI)		+= sunxi_nand.o
- obj-$(CONFIG_MTD_NAND_HISI504)	        += hisi504_nand.o
- obj-$(CONFIG_MTD_NAND_BRCMNAND)		+= brcmnand/
-+obj-$(CONFIG_MTD_NAND_QCOM)		+= qcom_nandc.o
- 
- nand-objs := nand_base.o nand_bbt.o nand_timings.o
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -48,50 +48,6 @@
- #include <linux/mtd/partitions.h>
- #include <linux/of_mtd.h>
- 
--/* Define default oob placement schemes for large and small page devices */
--static struct nand_ecclayout nand_oob_8 = {
--	.eccbytes = 3,
--	.eccpos = {0, 1, 2},
--	.oobfree = {
--		{.offset = 3,
--		 .length = 2},
--		{.offset = 6,
--		 .length = 2} }
--};
--
--static struct nand_ecclayout nand_oob_16 = {
--	.eccbytes = 6,
--	.eccpos = {0, 1, 2, 3, 6, 7},
--	.oobfree = {
--		{.offset = 8,
--		 . length = 8} }
--};
--
--static struct nand_ecclayout nand_oob_64 = {
--	.eccbytes = 24,
--	.eccpos = {
--		   40, 41, 42, 43, 44, 45, 46, 47,
--		   48, 49, 50, 51, 52, 53, 54, 55,
--		   56, 57, 58, 59, 60, 61, 62, 63},
--	.oobfree = {
--		{.offset = 2,
--		 .length = 38} }
--};
--
--static struct nand_ecclayout nand_oob_128 = {
--	.eccbytes = 48,
--	.eccpos = {
--		   80, 81, 82, 83, 84, 85, 86, 87,
--		   88, 89, 90, 91, 92, 93, 94, 95,
--		   96, 97, 98, 99, 100, 101, 102, 103,
--		   104, 105, 106, 107, 108, 109, 110, 111,
--		   112, 113, 114, 115, 116, 117, 118, 119,
--		   120, 121, 122, 123, 124, 125, 126, 127},
--	.oobfree = {
--		{.offset = 2,
--		 .length = 78} }
--};
--
- static int nand_get_device(struct mtd_info *mtd, int new_state);
- 
- static int nand_do_write_oob(struct mtd_info *mtd, loff_t to,
-@@ -103,10 +59,96 @@ static int nand_do_write_oob(struct mtd_
-  */
- DEFINE_LED_TRIGGER(nand_led_trigger);
- 
-+/* Define default oob placement schemes for large and small page devices */
-+static int nand_ooblayout_ecc_sp(struct mtd_info *mtd, int section,
-+				 struct mtd_oob_region *oobregion)
-+{
-+	struct nand_chip *chip = mtd_to_nand(mtd);
-+	struct nand_ecc_ctrl *ecc = &chip->ecc;
-+
-+	if (section > 1)
-+		return -ERANGE;
-+
-+	if (!section) {
-+		oobregion->offset = 0;
-+		oobregion->length = 4;
-+	} else {
-+		oobregion->offset = 6;
-+		oobregion->length = ecc->total - 4;
-+	}
-+
-+	return 0;
-+}
-+
-+static int nand_ooblayout_free_sp(struct mtd_info *mtd, int section,
-+				  struct mtd_oob_region *oobregion)
-+{
-+	if (section > 1)
-+		return -ERANGE;
-+
-+	if (mtd->oobsize == 16) {
-+		if (section)
-+			return -ERANGE;
-+
-+		oobregion->length = 8;
-+		oobregion->offset = 8;
-+	} else {
-+		oobregion->length = 2;
-+		if (!section)
-+			oobregion->offset = 3;
-+		else
-+			oobregion->offset = 6;
-+	}
-+
-+	return 0;
-+}
-+
-+const struct mtd_ooblayout_ops nand_ooblayout_sp_ops = {
-+	.ecc = nand_ooblayout_ecc_sp,
-+	.free = nand_ooblayout_free_sp,
-+};
-+EXPORT_SYMBOL_GPL(nand_ooblayout_sp_ops);
-+
-+static int nand_ooblayout_ecc_lp(struct mtd_info *mtd, int section,
-+				 struct mtd_oob_region *oobregion)
-+{
-+	struct nand_chip *chip = mtd_to_nand(mtd);
-+	struct nand_ecc_ctrl *ecc = &chip->ecc;
-+
-+	if (section)
-+		return -ERANGE;
-+
-+	oobregion->length = ecc->total;
-+	oobregion->offset = mtd->oobsize - oobregion->length;
-+
-+	return 0;
-+}
-+
-+static int nand_ooblayout_free_lp(struct mtd_info *mtd, int section,
-+				  struct mtd_oob_region *oobregion)
-+{
-+	struct nand_chip *chip = mtd_to_nand(mtd);
-+	struct nand_ecc_ctrl *ecc = &chip->ecc;
-+
-+	if (section)
-+		return -ERANGE;
-+
-+	oobregion->length = mtd->oobsize - ecc->total - 2;
-+	oobregion->offset = 2;
-+
-+	return 0;
-+}
-+
-+const struct mtd_ooblayout_ops nand_ooblayout_lp_ops = {
-+	.ecc = nand_ooblayout_ecc_lp,
-+	.free = nand_ooblayout_free_lp,
-+};
-+EXPORT_SYMBOL_GPL(nand_ooblayout_lp_ops);
-+
- static int check_offs_len(struct mtd_info *mtd,
- 					loff_t ofs, uint64_t len)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	int ret = 0;
- 
- 	/* Start address must align on block boundary */
-@@ -132,7 +174,7 @@ static int check_offs_len(struct mtd_inf
-  */
- static void nand_release_device(struct mtd_info *mtd)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	/* Release the controller and the chip */
- 	spin_lock(&chip->controller->lock);
-@@ -150,7 +192,7 @@ static void nand_release_device(struct m
-  */
- static uint8_t nand_read_byte(struct mtd_info *mtd)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	return readb(chip->IO_ADDR_R);
- }
- 
-@@ -163,7 +205,7 @@ static uint8_t nand_read_byte(struct mtd
-  */
- static uint8_t nand_read_byte16(struct mtd_info *mtd)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	return (uint8_t) cpu_to_le16(readw(chip->IO_ADDR_R));
- }
- 
-@@ -175,7 +217,7 @@ static uint8_t nand_read_byte16(struct m
-  */
- static u16 nand_read_word(struct mtd_info *mtd)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	return readw(chip->IO_ADDR_R);
- }
- 
-@@ -188,7 +230,7 @@ static u16 nand_read_word(struct mtd_inf
-  */
- static void nand_select_chip(struct mtd_info *mtd, int chipnr)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	switch (chipnr) {
- 	case -1:
-@@ -211,7 +253,7 @@ static void nand_select_chip(struct mtd_
-  */
- static void nand_write_byte(struct mtd_info *mtd, uint8_t byte)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	chip->write_buf(mtd, &byte, 1);
- }
-@@ -225,7 +267,7 @@ static void nand_write_byte(struct mtd_i
-  */
- static void nand_write_byte16(struct mtd_info *mtd, uint8_t byte)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	uint16_t word = byte;
- 
- 	/*
-@@ -257,7 +299,7 @@ static void nand_write_byte16(struct mtd
-  */
- static void nand_write_buf(struct mtd_info *mtd, const uint8_t *buf, int len)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	iowrite8_rep(chip->IO_ADDR_W, buf, len);
- }
-@@ -272,7 +314,7 @@ static void nand_write_buf(struct mtd_in
-  */
- static void nand_read_buf(struct mtd_info *mtd, uint8_t *buf, int len)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	ioread8_rep(chip->IO_ADDR_R, buf, len);
- }
-@@ -287,7 +329,7 @@ static void nand_read_buf(struct mtd_inf
-  */
- static void nand_write_buf16(struct mtd_info *mtd, const uint8_t *buf, int len)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	u16 *p = (u16 *) buf;
- 
- 	iowrite16_rep(chip->IO_ADDR_W, p, len >> 1);
-@@ -303,7 +345,7 @@ static void nand_write_buf16(struct mtd_
-  */
- static void nand_read_buf16(struct mtd_info *mtd, uint8_t *buf, int len)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	u16 *p = (u16 *) buf;
- 
- 	ioread16_rep(chip->IO_ADDR_R, p, len >> 1);
-@@ -313,14 +355,13 @@ static void nand_read_buf16(struct mtd_i
-  * nand_block_bad - [DEFAULT] Read bad block marker from the chip
-  * @mtd: MTD device structure
-  * @ofs: offset from device start
-- * @getchip: 0, if the chip is already selected
-  *
-  * Check, if the block is bad.
-  */
--static int nand_block_bad(struct mtd_info *mtd, loff_t ofs, int getchip)
-+static int nand_block_bad(struct mtd_info *mtd, loff_t ofs)
- {
--	int page, chipnr, res = 0, i = 0;
--	struct nand_chip *chip = mtd->priv;
-+	int page, res = 0, i = 0;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	u16 bad;
- 
- 	if (chip->bbt_options & NAND_BBT_SCANLASTPAGE)
-@@ -328,15 +369,6 @@ static int nand_block_bad(struct mtd_inf
- 
- 	page = (int)(ofs >> chip->page_shift) & chip->pagemask;
- 
--	if (getchip) {
--		chipnr = (int)(ofs >> chip->chip_shift);
--
--		nand_get_device(mtd, FL_READING);
--
--		/* Select the NAND device */
--		chip->select_chip(mtd, chipnr);
--	}
--
- 	do {
- 		if (chip->options & NAND_BUSWIDTH_16) {
- 			chip->cmdfunc(mtd, NAND_CMD_READOOB,
-@@ -361,11 +393,6 @@ static int nand_block_bad(struct mtd_inf
- 		i++;
- 	} while (!res && i < 2 && (chip->bbt_options & NAND_BBT_SCAN2NDPAGE));
- 
--	if (getchip) {
--		chip->select_chip(mtd, -1);
--		nand_release_device(mtd);
--	}
--
- 	return res;
- }
- 
-@@ -380,7 +407,7 @@ static int nand_block_bad(struct mtd_inf
-  */
- static int nand_default_block_markbad(struct mtd_info *mtd, loff_t ofs)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	struct mtd_oob_ops ops;
- 	uint8_t buf[2] = { 0, 0 };
- 	int ret = 0, res, i = 0;
-@@ -430,7 +457,7 @@ static int nand_default_block_markbad(st
- */
- static int nand_block_markbad_lowlevel(struct mtd_info *mtd, loff_t ofs)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	int res, ret = 0;
- 
- 	if (!(chip->bbt_options & NAND_BBT_NO_OOB_BBM)) {
-@@ -471,7 +498,7 @@ static int nand_block_markbad_lowlevel(s
-  */
- static int nand_check_wp(struct mtd_info *mtd)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	/* Broken xD cards report WP despite being writable */
- 	if (chip->options & NAND_BROKEN_XD)
-@@ -491,7 +518,7 @@ static int nand_check_wp(struct mtd_info
-  */
- static int nand_block_isreserved(struct mtd_info *mtd, loff_t ofs)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	if (!chip->bbt)
- 		return 0;
-@@ -503,19 +530,17 @@ static int nand_block_isreserved(struct
-  * nand_block_checkbad - [GENERIC] Check if a block is marked bad
-  * @mtd: MTD device structure
-  * @ofs: offset from device start
-- * @getchip: 0, if the chip is already selected
-  * @allowbbt: 1, if its allowed to access the bbt area
-  *
-  * Check, if the block is bad. Either by reading the bad block table or
-  * calling of the scan function.
-  */
--static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int getchip,
--			       int allowbbt)
-+static int nand_block_checkbad(struct mtd_info *mtd, loff_t ofs, int allowbbt)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	if (!chip->bbt)
--		return chip->block_bad(mtd, ofs, getchip);
-+		return chip->block_bad(mtd, ofs);
- 
- 	/* Return info from the table */
- 	return nand_isbad_bbt(mtd, ofs, allowbbt);
-@@ -531,7 +556,7 @@ static int nand_block_checkbad(struct mt
-  */
- static void panic_nand_wait_ready(struct mtd_info *mtd, unsigned long timeo)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	int i;
- 
- 	/* Wait for the device to get ready */
-@@ -551,7 +576,7 @@ static void panic_nand_wait_ready(struct
-  */
- void nand_wait_ready(struct mtd_info *mtd)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	unsigned long timeo = 400;
- 
- 	if (in_interrupt() || oops_in_progress)
-@@ -566,8 +591,8 @@ void nand_wait_ready(struct mtd_info *mt
- 		cond_resched();
- 	} while (time_before(jiffies, timeo));
- 
--	pr_warn_ratelimited(
--		"timeout while waiting for chip to become ready\n");
-+	if (!chip->dev_ready(mtd))
-+		pr_warn_ratelimited("timeout while waiting for chip to become ready\n");
- out:
- 	led_trigger_event(nand_led_trigger, LED_OFF);
- }
-@@ -582,7 +607,7 @@ EXPORT_SYMBOL_GPL(nand_wait_ready);
-  */
- static void nand_wait_status_ready(struct mtd_info *mtd, unsigned long timeo)
- {
--	register struct nand_chip *chip = mtd->priv;
-+	register struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	timeo = jiffies + msecs_to_jiffies(timeo);
- 	do {
-@@ -605,7 +630,7 @@ static void nand_wait_status_ready(struc
- static void nand_command(struct mtd_info *mtd, unsigned int command,
- 			 int column, int page_addr)
- {
--	register struct nand_chip *chip = mtd->priv;
-+	register struct nand_chip *chip = mtd_to_nand(mtd);
- 	int ctrl = NAND_CTRL_CLE | NAND_CTRL_CHANGE;
- 
- 	/* Write out the command to the device */
-@@ -708,7 +733,7 @@ static void nand_command(struct mtd_info
- static void nand_command_lp(struct mtd_info *mtd, unsigned int command,
- 			    int column, int page_addr)
- {
--	register struct nand_chip *chip = mtd->priv;
-+	register struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	/* Emulate NAND_CMD_READOOB */
- 	if (command == NAND_CMD_READOOB) {
-@@ -832,7 +857,7 @@ static void panic_nand_get_device(struct
- static int
- nand_get_device(struct mtd_info *mtd, int new_state)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	spinlock_t *lock = &chip->controller->lock;
- 	wait_queue_head_t *wq = &chip->controller->wq;
- 	DECLARE_WAITQUEUE(wait, current);
-@@ -952,7 +977,7 @@ static int __nand_unlock(struct mtd_info
- {
- 	int ret = 0;
- 	int status, page;
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	/* Submit address of first page to unlock */
- 	page = ofs >> chip->page_shift;
-@@ -987,7 +1012,7 @@ int nand_unlock(struct mtd_info *mtd, lo
- {
- 	int ret = 0;
- 	int chipnr;
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	pr_debug("%s: start = 0x%012llx, len = %llu\n",
- 			__func__, (unsigned long long)ofs, len);
-@@ -1050,7 +1075,7 @@ int nand_lock(struct mtd_info *mtd, loff
- {
- 	int ret = 0;
- 	int chipnr, status, page;
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	pr_debug("%s: start = 0x%012llx, len = %llu\n",
- 			__func__, (unsigned long long)ofs, len);
-@@ -1309,13 +1334,12 @@ static int nand_read_page_raw_syndrome(s
- static int nand_read_page_swecc(struct mtd_info *mtd, struct nand_chip *chip,
- 				uint8_t *buf, int oob_required, int page)
- {
--	int i, eccsize = chip->ecc.size;
-+	int i, eccsize = chip->ecc.size, ret;
- 	int eccbytes = chip->ecc.bytes;
- 	int eccsteps = chip->ecc.steps;
- 	uint8_t *p = buf;
- 	uint8_t *ecc_calc = chip->buffers->ecccalc;
- 	uint8_t *ecc_code = chip->buffers->ecccode;
--	uint32_t *eccpos = chip->ecc.layout->eccpos;
- 	unsigned int max_bitflips = 0;
- 
- 	chip->ecc.read_page_raw(mtd, chip, buf, 1, page);
-@@ -1323,8 +1347,10 @@ static int nand_read_page_swecc(struct m
- 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
- 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
- 
--	for (i = 0; i < chip->ecc.total; i++)
--		ecc_code[i] = chip->oob_poi[eccpos[i]];
-+	ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
-+					 chip->ecc.total);
-+	if (ret)
-+		return ret;
- 
- 	eccsteps = chip->ecc.steps;
- 	p = buf;
-@@ -1356,14 +1382,14 @@ static int nand_read_subpage(struct mtd_
- 			uint32_t data_offs, uint32_t readlen, uint8_t *bufpoi,
- 			int page)
- {
--	int start_step, end_step, num_steps;
--	uint32_t *eccpos = chip->ecc.layout->eccpos;
-+	int start_step, end_step, num_steps, ret;
- 	uint8_t *p;
- 	int data_col_addr, i, gaps = 0;
- 	int datafrag_len, eccfrag_len, aligned_len, aligned_pos;
- 	int busw = (chip->options & NAND_BUSWIDTH_16) ? 2 : 1;
--	int index;
-+	int index, section = 0;
- 	unsigned int max_bitflips = 0;
-+	struct mtd_oob_region oobregion = { };
- 
- 	/* Column address within the page aligned to ECC size (256bytes) */
- 	start_step = data_offs / chip->ecc.size;
-@@ -1391,12 +1417,13 @@ static int nand_read_subpage(struct mtd_
- 	 * The performance is faster if we position offsets according to
- 	 * ecc.pos. Let's make sure that there are no gaps in ECC positions.
- 	 */
--	for (i = 0; i < eccfrag_len - 1; i++) {
--		if (eccpos[i + index] + 1 != eccpos[i + index + 1]) {
--			gaps = 1;
--			break;
--		}
--	}
-+	ret = mtd_ooblayout_find_eccregion(mtd, index, &section, &oobregion);
-+	if (ret)
-+		return ret;
-+
-+	if (oobregion.length < eccfrag_len)
-+		gaps = 1;
-+
- 	if (gaps) {
- 		chip->cmdfunc(mtd, NAND_CMD_RNDOUT, mtd->writesize, -1);
- 		chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
-@@ -1405,20 +1432,23 @@ static int nand_read_subpage(struct mtd_
- 		 * Send the command to read the particular ECC bytes take care
- 		 * about buswidth alignment in read_buf.
- 		 */
--		aligned_pos = eccpos[index] & ~(busw - 1);
-+		aligned_pos = oobregion.offset & ~(busw - 1);
- 		aligned_len = eccfrag_len;
--		if (eccpos[index] & (busw - 1))
-+		if (oobregion.offset & (busw - 1))
- 			aligned_len++;
--		if (eccpos[index + (num_steps * chip->ecc.bytes)] & (busw - 1))
-+		if ((oobregion.offset + (num_steps * chip->ecc.bytes)) &
-+		    (busw - 1))
- 			aligned_len++;
- 
- 		chip->cmdfunc(mtd, NAND_CMD_RNDOUT,
--					mtd->writesize + aligned_pos, -1);
-+			      mtd->writesize + aligned_pos, -1);
- 		chip->read_buf(mtd, &chip->oob_poi[aligned_pos], aligned_len);
- 	}
- 
--	for (i = 0; i < eccfrag_len; i++)
--		chip->buffers->ecccode[i] = chip->oob_poi[eccpos[i + index]];
-+	ret = mtd_ooblayout_get_eccbytes(mtd, chip->buffers->ecccode,
-+					 chip->oob_poi, index, eccfrag_len);
-+	if (ret)
-+		return ret;
- 
- 	p = bufpoi + data_col_addr;
- 	for (i = 0; i < eccfrag_len ; i += chip->ecc.bytes, p += chip->ecc.size) {
-@@ -1426,6 +1456,16 @@ static int nand_read_subpage(struct mtd_
- 
- 		stat = chip->ecc.correct(mtd, p,
- 			&chip->buffers->ecccode[i], &chip->buffers->ecccalc[i]);
-+		if (stat == -EBADMSG &&
-+		    (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) {
-+			/* check for empty pages with bitflips */
-+			stat = nand_check_erased_ecc_chunk(p, chip->ecc.size,
-+						&chip->buffers->ecccode[i],
-+						chip->ecc.bytes,
-+						NULL, 0,
-+						chip->ecc.strength);
-+		}
-+
- 		if (stat < 0) {
- 			mtd->ecc_stats.failed++;
- 		} else {
-@@ -1449,13 +1489,12 @@ static int nand_read_subpage(struct mtd_
- static int nand_read_page_hwecc(struct mtd_info *mtd, struct nand_chip *chip,
- 				uint8_t *buf, int oob_required, int page)
- {
--	int i, eccsize = chip->ecc.size;
-+	int i, eccsize = chip->ecc.size, ret;
- 	int eccbytes = chip->ecc.bytes;
- 	int eccsteps = chip->ecc.steps;
- 	uint8_t *p = buf;
- 	uint8_t *ecc_calc = chip->buffers->ecccalc;
- 	uint8_t *ecc_code = chip->buffers->ecccode;
--	uint32_t *eccpos = chip->ecc.layout->eccpos;
- 	unsigned int max_bitflips = 0;
- 
- 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
-@@ -1465,8 +1504,10 @@ static int nand_read_page_hwecc(struct m
- 	}
- 	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
- 
--	for (i = 0; i < chip->ecc.total; i++)
--		ecc_code[i] = chip->oob_poi[eccpos[i]];
-+	ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
-+					 chip->ecc.total);
-+	if (ret)
-+		return ret;
- 
- 	eccsteps = chip->ecc.steps;
- 	p = buf;
-@@ -1475,6 +1516,15 @@ static int nand_read_page_hwecc(struct m
- 		int stat;
- 
- 		stat = chip->ecc.correct(mtd, p, &ecc_code[i], &ecc_calc[i]);
-+		if (stat == -EBADMSG &&
-+		    (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) {
-+			/* check for empty pages with bitflips */
-+			stat = nand_check_erased_ecc_chunk(p, eccsize,
-+						&ecc_code[i], eccbytes,
-+						NULL, 0,
-+						chip->ecc.strength);
-+		}
-+
- 		if (stat < 0) {
- 			mtd->ecc_stats.failed++;
- 		} else {
-@@ -1502,12 +1552,11 @@ static int nand_read_page_hwecc(struct m
- static int nand_read_page_hwecc_oob_first(struct mtd_info *mtd,
- 	struct nand_chip *chip, uint8_t *buf, int oob_required, int page)
- {
--	int i, eccsize = chip->ecc.size;
-+	int i, eccsize = chip->ecc.size, ret;
- 	int eccbytes = chip->ecc.bytes;
- 	int eccsteps = chip->ecc.steps;
- 	uint8_t *p = buf;
- 	uint8_t *ecc_code = chip->buffers->ecccode;
--	uint32_t *eccpos = chip->ecc.layout->eccpos;
- 	uint8_t *ecc_calc = chip->buffers->ecccalc;
- 	unsigned int max_bitflips = 0;
- 
-@@ -1516,8 +1565,10 @@ static int nand_read_page_hwecc_oob_firs
- 	chip->read_buf(mtd, chip->oob_poi, mtd->oobsize);
- 	chip->cmdfunc(mtd, NAND_CMD_READ0, 0, page);
- 
--	for (i = 0; i < chip->ecc.total; i++)
--		ecc_code[i] = chip->oob_poi[eccpos[i]];
-+	ret = mtd_ooblayout_get_eccbytes(mtd, ecc_code, chip->oob_poi, 0,
-+					 chip->ecc.total);
-+	if (ret)
-+		return ret;
- 
- 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
- 		int stat;
-@@ -1527,6 +1578,15 @@ static int nand_read_page_hwecc_oob_firs
- 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
- 
- 		stat = chip->ecc.correct(mtd, p, &ecc_code[i], NULL);
-+		if (stat == -EBADMSG &&
-+		    (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) {
-+			/* check for empty pages with bitflips */
-+			stat = nand_check_erased_ecc_chunk(p, eccsize,
-+						&ecc_code[i], eccbytes,
-+						NULL, 0,
-+						chip->ecc.strength);
-+		}
-+
- 		if (stat < 0) {
- 			mtd->ecc_stats.failed++;
- 		} else {
-@@ -1554,6 +1614,7 @@ static int nand_read_page_syndrome(struc
- 	int i, eccsize = chip->ecc.size;
- 	int eccbytes = chip->ecc.bytes;
- 	int eccsteps = chip->ecc.steps;
-+	int eccpadbytes = eccbytes + chip->ecc.prepad + chip->ecc.postpad;
- 	uint8_t *p = buf;
- 	uint8_t *oob = chip->oob_poi;
- 	unsigned int max_bitflips = 0;
-@@ -1573,19 +1634,29 @@ static int nand_read_page_syndrome(struc
- 		chip->read_buf(mtd, oob, eccbytes);
- 		stat = chip->ecc.correct(mtd, p, oob, NULL);
- 
--		if (stat < 0) {
--			mtd->ecc_stats.failed++;
--		} else {
--			mtd->ecc_stats.corrected += stat;
--			max_bitflips = max_t(unsigned int, max_bitflips, stat);
--		}
--
- 		oob += eccbytes;
- 
- 		if (chip->ecc.postpad) {
- 			chip->read_buf(mtd, oob, chip->ecc.postpad);
- 			oob += chip->ecc.postpad;
- 		}
-+
-+		if (stat == -EBADMSG &&
-+		    (chip->ecc.options & NAND_ECC_GENERIC_ERASED_CHECK)) {
-+			/* check for empty pages with bitflips */
-+			stat = nand_check_erased_ecc_chunk(p, chip->ecc.size,
-+							   oob - eccpadbytes,
-+							   eccpadbytes,
-+							   NULL, 0,
-+							   chip->ecc.strength);
-+		}
-+
-+		if (stat < 0) {
-+			mtd->ecc_stats.failed++;
-+		} else {
-+			mtd->ecc_stats.corrected += stat;
-+			max_bitflips = max_t(unsigned int, max_bitflips, stat);
-+		}
- 	}
- 
- 	/* Calculate remaining oob bytes */
-@@ -1598,14 +1669,17 @@ static int nand_read_page_syndrome(struc
- 
- /**
-  * nand_transfer_oob - [INTERN] Transfer oob to client buffer
-- * @chip: nand chip structure
-+ * @mtd: mtd info structure
-  * @oob: oob destination address
-  * @ops: oob ops structure
-  * @len: size of oob to transfer
-  */
--static uint8_t *nand_transfer_oob(struct nand_chip *chip, uint8_t *oob,
-+static uint8_t *nand_transfer_oob(struct mtd_info *mtd, uint8_t *oob,
- 				  struct mtd_oob_ops *ops, size_t len)
- {
-+	struct nand_chip *chip = mtd_to_nand(mtd);
-+	int ret;
-+
- 	switch (ops->mode) {
- 
- 	case MTD_OPS_PLACE_OOB:
-@@ -1613,31 +1687,12 @@ static uint8_t *nand_transfer_oob(struct
- 		memcpy(oob, chip->oob_poi + ops->ooboffs, len);
- 		return oob + len;
- 
--	case MTD_OPS_AUTO_OOB: {
--		struct nand_oobfree *free = chip->ecc.layout->oobfree;
--		uint32_t boffs = 0, roffs = ops->ooboffs;
--		size_t bytes = 0;
--
--		for (; free->length && len; free++, len -= bytes) {
--			/* Read request not from offset 0? */
--			if (unlikely(roffs)) {
--				if (roffs >= free->length) {
--					roffs -= free->length;
--					continue;
--				}
--				boffs = free->offset + roffs;
--				bytes = min_t(size_t, len,
--					      (free->length - roffs));
--				roffs = 0;
--			} else {
--				bytes = min_t(size_t, len, free->length);
--				boffs = free->offset;
--			}
--			memcpy(oob, chip->oob_poi + boffs, bytes);
--			oob += bytes;
--		}
--		return oob;
--	}
-+	case MTD_OPS_AUTO_OOB:
-+		ret = mtd_ooblayout_get_databytes(mtd, oob, chip->oob_poi,
-+						  ops->ooboffs, len);
-+		BUG_ON(ret);
-+		return oob + len;
-+
- 	default:
- 		BUG();
- 	}
-@@ -1655,7 +1710,7 @@ static uint8_t *nand_transfer_oob(struct
-  */
- static int nand_setup_read_retry(struct mtd_info *mtd, int retry_mode)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	pr_debug("setting READ RETRY mode %d\n", retry_mode);
- 
-@@ -1680,12 +1735,11 @@ static int nand_do_read_ops(struct mtd_i
- 			    struct mtd_oob_ops *ops)
- {
- 	int chipnr, page, realpage, col, bytes, aligned, oob_required;
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	int ret = 0;
- 	uint32_t readlen = ops->len;
- 	uint32_t oobreadlen = ops->ooblen;
--	uint32_t max_oobsize = ops->mode == MTD_OPS_AUTO_OOB ?
--		mtd->oobavail : mtd->oobsize;
-+	uint32_t max_oobsize = mtd_oobavail(mtd, ops);
- 
- 	uint8_t *bufpoi, *oob, *buf;
- 	int use_bufpoi;
-@@ -1772,7 +1826,7 @@ read_retry:
- 				int toread = min(oobreadlen, max_oobsize);
- 
- 				if (toread) {
--					oob = nand_transfer_oob(chip,
-+					oob = nand_transfer_oob(mtd,
- 						oob, ops, toread);
- 					oobreadlen -= toread;
- 				}
-@@ -2025,7 +2079,7 @@ static int nand_do_read_oob(struct mtd_i
- {
- 	unsigned int max_bitflips = 0;
- 	int page, realpage, chipnr;
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	struct mtd_ecc_stats stats;
- 	int readlen = ops->ooblen;
- 	int len;
-@@ -2037,10 +2091,7 @@ static int nand_do_read_oob(struct mtd_i
- 
- 	stats = mtd->ecc_stats;
- 
--	if (ops->mode == MTD_OPS_AUTO_OOB)
--		len = chip->ecc.layout->oobavail;
--	else
--		len = mtd->oobsize;
-+	len = mtd_oobavail(mtd, ops);
- 
- 	if (unlikely(ops->ooboffs >= len)) {
- 		pr_debug("%s: attempt to start read outside oob\n",
-@@ -2074,7 +2125,7 @@ static int nand_do_read_oob(struct mtd_i
- 			break;
- 
- 		len = min(len, readlen);
--		buf = nand_transfer_oob(chip, buf, ops, len);
-+		buf = nand_transfer_oob(mtd, buf, ops, len);
- 
- 		if (chip->options & NAND_NEED_READRDY) {
- 			/* Apply delay or wait for ready/busy pin */
-@@ -2235,19 +2286,20 @@ static int nand_write_page_swecc(struct
- 				 const uint8_t *buf, int oob_required,
- 				 int page)
- {
--	int i, eccsize = chip->ecc.size;
-+	int i, eccsize = chip->ecc.size, ret;
- 	int eccbytes = chip->ecc.bytes;
- 	int eccsteps = chip->ecc.steps;
- 	uint8_t *ecc_calc = chip->buffers->ecccalc;
- 	const uint8_t *p = buf;
--	uint32_t *eccpos = chip->ecc.layout->eccpos;
- 
- 	/* Software ECC calculation */
- 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize)
- 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
- 
--	for (i = 0; i < chip->ecc.total; i++)
--		chip->oob_poi[eccpos[i]] = ecc_calc[i];
-+	ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
-+					 chip->ecc.total);
-+	if (ret)
-+		return ret;
- 
- 	return chip->ecc.write_page_raw(mtd, chip, buf, 1, page);
- }
-@@ -2264,12 +2316,11 @@ static int nand_write_page_hwecc(struct
- 				  const uint8_t *buf, int oob_required,
- 				  int page)
- {
--	int i, eccsize = chip->ecc.size;
-+	int i, eccsize = chip->ecc.size, ret;
- 	int eccbytes = chip->ecc.bytes;
- 	int eccsteps = chip->ecc.steps;
- 	uint8_t *ecc_calc = chip->buffers->ecccalc;
- 	const uint8_t *p = buf;
--	uint32_t *eccpos = chip->ecc.layout->eccpos;
- 
- 	for (i = 0; eccsteps; eccsteps--, i += eccbytes, p += eccsize) {
- 		chip->ecc.hwctl(mtd, NAND_ECC_WRITE);
-@@ -2277,8 +2328,10 @@ static int nand_write_page_hwecc(struct
- 		chip->ecc.calculate(mtd, p, &ecc_calc[i]);
- 	}
- 
--	for (i = 0; i < chip->ecc.total; i++)
--		chip->oob_poi[eccpos[i]] = ecc_calc[i];
-+	ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
-+					 chip->ecc.total);
-+	if (ret)
-+		return ret;
- 
- 	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
- 
-@@ -2306,11 +2359,10 @@ static int nand_write_subpage_hwecc(stru
- 	int ecc_size      = chip->ecc.size;
- 	int ecc_bytes     = chip->ecc.bytes;
- 	int ecc_steps     = chip->ecc.steps;
--	uint32_t *eccpos  = chip->ecc.layout->eccpos;
- 	uint32_t start_step = offset / ecc_size;
- 	uint32_t end_step   = (offset + data_len - 1) / ecc_size;
- 	int oob_bytes       = mtd->oobsize / ecc_steps;
--	int step, i;
-+	int step, ret;
- 
- 	for (step = 0; step < ecc_steps; step++) {
- 		/* configure controller for WRITE access */
-@@ -2338,8 +2390,10 @@ static int nand_write_subpage_hwecc(stru
- 	/* copy calculated ECC for whole page to chip->buffer->oob */
- 	/* this include masked-value(0xFF) for unwritten subpages */
- 	ecc_calc = chip->buffers->ecccalc;
--	for (i = 0; i < chip->ecc.total; i++)
--		chip->oob_poi[eccpos[i]] = ecc_calc[i];
-+	ret = mtd_ooblayout_set_eccbytes(mtd, ecc_calc, chip->oob_poi, 0,
-+					 chip->ecc.total);
-+	if (ret)
-+		return ret;
- 
- 	/* write OOB buffer to NAND device */
- 	chip->write_buf(mtd, chip->oob_poi, mtd->oobsize);
-@@ -2475,7 +2529,8 @@ static int nand_write_page(struct mtd_in
- static uint8_t *nand_fill_oob(struct mtd_info *mtd, uint8_t *oob, size_t len,
- 			      struct mtd_oob_ops *ops)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
-+	int ret;
- 
- 	/*
- 	 * Initialise to all 0xFF, to avoid the possibility of left over OOB
-@@ -2490,31 +2545,12 @@ static uint8_t *nand_fill_oob(struct mtd
- 		memcpy(chip->oob_poi + ops->ooboffs, oob, len);
- 		return oob + len;
- 
--	case MTD_OPS_AUTO_OOB: {
--		struct nand_oobfree *free = chip->ecc.layout->oobfree;
--		uint32_t boffs = 0, woffs = ops->ooboffs;
--		size_t bytes = 0;
--
--		for (; free->length && len; free++, len -= bytes) {
--			/* Write request not from offset 0? */
--			if (unlikely(woffs)) {
--				if (woffs >= free->length) {
--					woffs -= free->length;
--					continue;
--				}
--				boffs = free->offset + woffs;
--				bytes = min_t(size_t, len,
--					      (free->length - woffs));
--				woffs = 0;
--			} else {
--				bytes = min_t(size_t, len, free->length);
--				boffs = free->offset;
--			}
--			memcpy(chip->oob_poi + boffs, oob, bytes);
--			oob += bytes;
--		}
--		return oob;
--	}
-+	case MTD_OPS_AUTO_OOB:
-+		ret = mtd_ooblayout_set_databytes(mtd, oob, chip->oob_poi,
-+						  ops->ooboffs, len);
-+		BUG_ON(ret);
-+		return oob + len;
-+
- 	default:
- 		BUG();
- 	}
-@@ -2535,12 +2571,11 @@ static int nand_do_write_ops(struct mtd_
- 			     struct mtd_oob_ops *ops)
- {
- 	int chipnr, realpage, page, blockmask, column;
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	uint32_t writelen = ops->len;
- 
- 	uint32_t oobwritelen = ops->ooblen;
--	uint32_t oobmaxlen = ops->mode == MTD_OPS_AUTO_OOB ?
--				mtd->oobavail : mtd->oobsize;
-+	uint32_t oobmaxlen = mtd_oobavail(mtd, ops);
- 
- 	uint8_t *oob = ops->oobbuf;
- 	uint8_t *buf = ops->datbuf;
-@@ -2665,7 +2700,7 @@ err_out:
- static int panic_nand_write(struct mtd_info *mtd, loff_t to, size_t len,
- 			    size_t *retlen, const uint8_t *buf)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	int chipnr = (int)(to >> chip->chip_shift);
- 	struct mtd_oob_ops ops;
- 	int ret;
-@@ -2728,15 +2763,12 @@ static int nand_do_write_oob(struct mtd_
- 			     struct mtd_oob_ops *ops)
- {
- 	int chipnr, page, status, len;
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	pr_debug("%s: to = 0x%08x, len = %i\n",
- 			 __func__, (unsigned int)to, (int)ops->ooblen);
- 
--	if (ops->mode == MTD_OPS_AUTO_OOB)
--		len = chip->ecc.layout->oobavail;
--	else
--		len = mtd->oobsize;
-+	len = mtd_oobavail(mtd, ops);
- 
- 	/* Do not allow write past end of page */
- 	if ((ops->ooboffs + ops->ooblen) > len) {
-@@ -2853,7 +2885,7 @@ out:
-  */
- static int single_erase(struct mtd_info *mtd, int page)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	/* Send commands to erase a block */
- 	chip->cmdfunc(mtd, NAND_CMD_ERASE1, -1, page);
- 	chip->cmdfunc(mtd, NAND_CMD_ERASE2, -1, -1);
-@@ -2885,7 +2917,7 @@ int nand_erase_nand(struct mtd_info *mtd
- 		    int allowbbt)
- {
- 	int page, status, pages_per_block, ret, chipnr;
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	loff_t len;
- 
- 	pr_debug("%s: start = 0x%012llx, len = %llu\n",
-@@ -2924,7 +2956,7 @@ int nand_erase_nand(struct mtd_info *mtd
- 	while (len) {
- 		/* Check if we have a bad block, we do not erase bad blocks! */
- 		if (nand_block_checkbad(mtd, ((loff_t) page) <<
--					chip->page_shift, 0, allowbbt)) {
-+					chip->page_shift, allowbbt)) {
- 			pr_warn("%s: attempt to erase a bad block at page 0x%08x\n",
- 				    __func__, page);
- 			instr->state = MTD_ERASE_FAILED;
-@@ -3011,7 +3043,20 @@ static void nand_sync(struct mtd_info *m
-  */
- static int nand_block_isbad(struct mtd_info *mtd, loff_t offs)
- {
--	return nand_block_checkbad(mtd, offs, 1, 0);
-+	struct nand_chip *chip = mtd_to_nand(mtd);
-+	int chipnr = (int)(offs >> chip->chip_shift);
-+	int ret;
-+
-+	/* Select the NAND device */
-+	nand_get_device(mtd, FL_READING);
-+	chip->select_chip(mtd, chipnr);
-+
-+	ret = nand_block_checkbad(mtd, offs, 0);
-+
-+	chip->select_chip(mtd, -1);
-+	nand_release_device(mtd);
-+
-+	return ret;
- }
- 
- /**
-@@ -3100,7 +3145,7 @@ static int nand_suspend(struct mtd_info
-  */
- static void nand_resume(struct mtd_info *mtd)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	if (chip->state == FL_PM_SUSPENDED)
- 		nand_release_device(mtd);
-@@ -3272,7 +3317,7 @@ ext_out:
- 
- static int nand_setup_read_retry_micron(struct mtd_info *mtd, int retry_mode)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	uint8_t feature[ONFI_SUBFEATURE_PARAM_LEN] = {retry_mode};
- 
- 	return chip->onfi_set_features(mtd, chip, ONFI_FEATURE_ADDR_READ_RETRY,
-@@ -3943,10 +3988,13 @@ ident_done:
- 	return type;
- }
- 
--static int nand_dt_init(struct mtd_info *mtd, struct nand_chip *chip,
--			struct device_node *dn)
-+static int nand_dt_init(struct nand_chip *chip)
- {
--	int ecc_mode, ecc_strength, ecc_step;
-+	struct device_node *dn = nand_get_flash_node(chip);
-+	int ecc_mode, ecc_algo, ecc_strength, ecc_step;
-+
-+	if (!dn)
-+		return 0;
- 
- 	if (of_get_nand_bus_width(dn) == 16)
- 		chip->options |= NAND_BUSWIDTH_16;
-@@ -3955,6 +4003,7 @@ static int nand_dt_init(struct mtd_info
- 		chip->bbt_options |= NAND_BBT_USE_FLASH;
- 
- 	ecc_mode = of_get_nand_ecc_mode(dn);
-+	ecc_algo = of_get_nand_ecc_algo(dn);
- 	ecc_strength = of_get_nand_ecc_strength(dn);
- 	ecc_step = of_get_nand_ecc_step_size(dn);
- 
-@@ -3967,6 +4016,9 @@ static int nand_dt_init(struct mtd_info
- 	if (ecc_mode >= 0)
- 		chip->ecc.mode = ecc_mode;
- 
-+	if (ecc_algo >= 0)
-+		chip->ecc.algo = ecc_algo;
-+
- 	if (ecc_strength >= 0)
- 		chip->ecc.strength = ecc_strength;
- 
-@@ -3990,15 +4042,16 @@ int nand_scan_ident(struct mtd_info *mtd
- 		    struct nand_flash_dev *table)
- {
- 	int i, nand_maf_id, nand_dev_id;
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	struct nand_flash_dev *type;
- 	int ret;
- 
--	if (chip->flash_node) {
--		ret = nand_dt_init(mtd, chip, chip->flash_node);
--		if (ret)
--			return ret;
--	}
-+	ret = nand_dt_init(chip);
-+	if (ret)
-+		return ret;
-+
-+	if (!mtd->name && mtd->dev.parent)
-+		mtd->name = dev_name(mtd->dev.parent);
- 
- 	if (!mtd->name && mtd->dev.parent)
- 		mtd->name = dev_name(mtd->dev.parent);
-@@ -4061,7 +4114,7 @@ EXPORT_SYMBOL(nand_scan_ident);
-  */
- static bool nand_ecc_strength_good(struct mtd_info *mtd)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	struct nand_ecc_ctrl *ecc = &chip->ecc;
- 	int corr, ds_corr;
- 
-@@ -4089,10 +4142,10 @@ static bool nand_ecc_strength_good(struc
-  */
- int nand_scan_tail(struct mtd_info *mtd)
- {
--	int i;
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 	struct nand_ecc_ctrl *ecc = &chip->ecc;
- 	struct nand_buffers *nbuf;
-+	int ret;
- 
- 	/* New bad blocks should be marked in OOB, flash-based BBT, or both */
- 	BUG_ON((chip->bbt_options & NAND_BBT_NO_OOB_BBM) &&
-@@ -4119,19 +4172,15 @@ int nand_scan_tail(struct mtd_info *mtd)
- 	/*
- 	 * If no default placement scheme is given, select an appropriate one.
- 	 */
--	if (!ecc->layout && (ecc->mode != NAND_ECC_SOFT_BCH)) {
-+	if (!mtd->ooblayout && (ecc->mode != NAND_ECC_SOFT_BCH)) {
- 		switch (mtd->oobsize) {
- 		case 8:
--			ecc->layout = &nand_oob_8;
--			break;
- 		case 16:
--			ecc->layout = &nand_oob_16;
-+			mtd_set_ooblayout(mtd, &nand_ooblayout_sp_ops);
- 			break;
- 		case 64:
--			ecc->layout = &nand_oob_64;
--			break;
- 		case 128:
--			ecc->layout = &nand_oob_128;
-+			mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
- 			break;
- 		default:
- 			pr_warn("No oob scheme defined for oobsize %d\n",
-@@ -4174,7 +4223,7 @@ int nand_scan_tail(struct mtd_info *mtd)
- 			ecc->write_oob = nand_write_oob_std;
- 		if (!ecc->read_subpage)
- 			ecc->read_subpage = nand_read_subpage;
--		if (!ecc->write_subpage)
-+		if (!ecc->write_subpage && ecc->hwctl && ecc->calculate)
- 			ecc->write_subpage = nand_write_subpage_hwecc;
- 
- 	case NAND_ECC_HW_SYNDROME:
-@@ -4252,10 +4301,8 @@ int nand_scan_tail(struct mtd_info *mtd)
- 		}
- 
- 		/* See nand_bch_init() for details. */
--		ecc->bytes = DIV_ROUND_UP(
--				ecc->strength * fls(8 * ecc->size), 8);
--		ecc->priv = nand_bch_init(mtd, ecc->size, ecc->bytes,
--					       &ecc->layout);
-+		ecc->bytes = 0;
-+		ecc->priv = nand_bch_init(mtd);
- 		if (!ecc->priv) {
- 			pr_warn("BCH ECC initialization failed!\n");
- 			BUG();
-@@ -4286,20 +4333,9 @@ int nand_scan_tail(struct mtd_info *mtd)
- 	if (!ecc->write_oob_raw)
- 		ecc->write_oob_raw = ecc->write_oob;
- 
--	/*
--	 * The number of bytes available for a client to place data into
--	 * the out of band area.
--	 */
--	ecc->layout->oobavail = 0;
--	for (i = 0; ecc->layout->oobfree[i].length
--			&& i < ARRAY_SIZE(ecc->layout->oobfree); i++)
--		ecc->layout->oobavail += ecc->layout->oobfree[i].length;
--	mtd->oobavail = ecc->layout->oobavail;
--
--	/* ECC sanity check: warn if it's too weak */
--	if (!nand_ecc_strength_good(mtd))
--		pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
--			mtd->name);
-+	/* propagate ecc info to mtd_info */
-+	mtd->ecc_strength = ecc->strength;
-+	mtd->ecc_step_size = ecc->size;
- 
- 	/*
- 	 * Set the number of read / write steps for one page depending on ECC
-@@ -4312,6 +4348,21 @@ int nand_scan_tail(struct mtd_info *mtd)
- 	}
- 	ecc->total = ecc->steps * ecc->bytes;
- 
-+	/*
-+	 * The number of bytes available for a client to place data into
-+	 * the out of band area.
-+	 */
-+	ret = mtd_ooblayout_count_freebytes(mtd);
-+	if (ret < 0)
-+		ret = 0;
-+
-+	mtd->oobavail = ret;
-+
-+	/* ECC sanity check: warn if it's too weak */
-+	if (!nand_ecc_strength_good(mtd))
-+		pr_warn("WARNING: %s: the ECC used on your system is too weak compared to the one required by the NAND chip\n",
-+			mtd->name);
-+
- 	/* Allow subpage writes up to ecc.steps. Not possible for MLC flash */
- 	if (!(chip->options & NAND_NO_SUBPAGE_WRITE) && nand_is_slc(chip)) {
- 		switch (ecc->steps) {
-@@ -4368,10 +4419,6 @@ int nand_scan_tail(struct mtd_info *mtd)
- 	mtd->_block_markbad = nand_block_markbad;
- 	mtd->writebufsize = mtd->writesize;
- 
--	/* propagate ecc info to mtd_info */
--	mtd->ecclayout = ecc->layout;
--	mtd->ecc_strength = ecc->strength;
--	mtd->ecc_step_size = ecc->size;
- 	/*
- 	 * Initialize bitflip_threshold to its default prior scan_bbt() call.
- 	 * scan_bbt() might invoke mtd_read(), thus bitflip_threshold must be
-@@ -4427,7 +4474,7 @@ EXPORT_SYMBOL(nand_scan);
-  */
- void nand_release(struct mtd_info *mtd)
- {
--	struct nand_chip *chip = mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	if (chip->ecc.mode == NAND_ECC_SOFT_BCH)
- 		nand_bch_free((struct nand_bch_control *)chip->ecc.priv);
---- a/drivers/mtd/nand/nand_bbt.c
-+++ b/drivers/mtd/nand/nand_bbt.c
-@@ -172,7 +172,7 @@ static int read_bbt(struct mtd_info *mtd
- 		struct nand_bbt_descr *td, int offs)
- {
- 	int res, ret = 0, i, j, act = 0;
--	struct nand_chip *this = mtd->priv;
-+	struct nand_chip *this = mtd_to_nand(mtd);
- 	size_t retlen, len, totlen;
- 	loff_t from;
- 	int bits = td->options & NAND_BBT_NRBITS_MSK;
-@@ -263,7 +263,7 @@ static int read_bbt(struct mtd_info *mtd
-  */
- static int read_abs_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td, int chip)
- {
--	struct nand_chip *this = mtd->priv;
-+	struct nand_chip *this = mtd_to_nand(mtd);
- 	int res = 0, i;
- 
- 	if (td->options & NAND_BBT_PERCHIP) {
-@@ -388,7 +388,7 @@ static u32 bbt_get_ver_offs(struct mtd_i
- static void read_abs_bbts(struct mtd_info *mtd, uint8_t *buf,
- 			  struct nand_bbt_descr *td, struct nand_bbt_descr *md)
- {
--	struct nand_chip *this = mtd->priv;
-+	struct nand_chip *this = mtd_to_nand(mtd);
- 
- 	/* Read the primary version, if available */
- 	if (td->options & NAND_BBT_VERSION) {
-@@ -454,7 +454,7 @@ static int scan_block_fast(struct mtd_in
- static int create_bbt(struct mtd_info *mtd, uint8_t *buf,
- 	struct nand_bbt_descr *bd, int chip)
- {
--	struct nand_chip *this = mtd->priv;
-+	struct nand_chip *this = mtd_to_nand(mtd);
- 	int i, numblocks, numpages;
- 	int startblock;
- 	loff_t from;
-@@ -523,7 +523,7 @@ static int create_bbt(struct mtd_info *m
-  */
- static int search_bbt(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *td)
- {
--	struct nand_chip *this = mtd->priv;
-+	struct nand_chip *this = mtd_to_nand(mtd);
- 	int i, chips;
- 	int startblock, block, dir;
- 	int scanlen = mtd->writesize + mtd->oobsize;
-@@ -618,7 +618,7 @@ static int write_bbt(struct mtd_info *mt
- 		     struct nand_bbt_descr *td, struct nand_bbt_descr *md,
- 		     int chipsel)
- {
--	struct nand_chip *this = mtd->priv;
-+	struct nand_chip *this = mtd_to_nand(mtd);
- 	struct erase_info einfo;
- 	int i, res, chip = 0;
- 	int bits, startblock, dir, page, offs, numblocks, sft, sftmsk;
-@@ -819,7 +819,7 @@ static int write_bbt(struct mtd_info *mt
-  */
- static inline int nand_memory_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
- {
--	struct nand_chip *this = mtd->priv;
-+	struct nand_chip *this = mtd_to_nand(mtd);
- 
- 	return create_bbt(mtd, this->buffers->databuf, bd, -1);
- }
-@@ -838,7 +838,7 @@ static inline int nand_memory_bbt(struct
- static int check_create(struct mtd_info *mtd, uint8_t *buf, struct nand_bbt_descr *bd)
- {
- 	int i, chips, writeops, create, chipsel, res, res2;
--	struct nand_chip *this = mtd->priv;
-+	struct nand_chip *this = mtd_to_nand(mtd);
- 	struct nand_bbt_descr *td = this->bbt_td;
- 	struct nand_bbt_descr *md = this->bbt_md;
- 	struct nand_bbt_descr *rd, *rd2;
-@@ -962,7 +962,7 @@ static int check_create(struct mtd_info
-  */
- static void mark_bbt_region(struct mtd_info *mtd, struct nand_bbt_descr *td)
- {
--	struct nand_chip *this = mtd->priv;
-+	struct nand_chip *this = mtd_to_nand(mtd);
- 	int i, j, chips, block, nrblocks, update;
- 	uint8_t oldval;
- 
-@@ -1022,7 +1022,7 @@ static void mark_bbt_region(struct mtd_i
-  */
- static void verify_bbt_descr(struct mtd_info *mtd, struct nand_bbt_descr *bd)
- {
--	struct nand_chip *this = mtd->priv;
-+	struct nand_chip *this = mtd_to_nand(mtd);
- 	u32 pattern_len;
- 	u32 bits;
- 	u32 table_size;
-@@ -1074,7 +1074,7 @@ static void verify_bbt_descr(struct mtd_
-  */
- static int nand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd)
- {
--	struct nand_chip *this = mtd->priv;
-+	struct nand_chip *this = mtd_to_nand(mtd);
- 	int len, res;
- 	uint8_t *buf;
- 	struct nand_bbt_descr *td = this->bbt_td;
-@@ -1147,7 +1147,7 @@ err:
-  */
- static int nand_update_bbt(struct mtd_info *mtd, loff_t offs)
- {
--	struct nand_chip *this = mtd->priv;
-+	struct nand_chip *this = mtd_to_nand(mtd);
- 	int len, res = 0;
- 	int chip, chipsel;
- 	uint8_t *buf;
-@@ -1281,7 +1281,7 @@ static int nand_create_badblock_pattern(
-  */
- int nand_default_bbt(struct mtd_info *mtd)
- {
--	struct nand_chip *this = mtd->priv;
-+	struct nand_chip *this = mtd_to_nand(mtd);
- 	int ret;
- 
- 	/* Is a flash based bad block table requested? */
-@@ -1317,7 +1317,7 @@ int nand_default_bbt(struct mtd_info *mt
-  */
- int nand_isreserved_bbt(struct mtd_info *mtd, loff_t offs)
- {
--	struct nand_chip *this = mtd->priv;
-+	struct nand_chip *this = mtd_to_nand(mtd);
- 	int block;
- 
- 	block = (int)(offs >> this->bbt_erase_shift);
-@@ -1332,7 +1332,7 @@ int nand_isreserved_bbt(struct mtd_info
-  */
- int nand_isbad_bbt(struct mtd_info *mtd, loff_t offs, int allowbbt)
- {
--	struct nand_chip *this = mtd->priv;
-+	struct nand_chip *this = mtd_to_nand(mtd);
- 	int block, res;
- 
- 	block = (int)(offs >> this->bbt_erase_shift);
-@@ -1359,7 +1359,7 @@ int nand_isbad_bbt(struct mtd_info *mtd,
-  */
- int nand_markbad_bbt(struct mtd_info *mtd, loff_t offs)
- {
--	struct nand_chip *this = mtd->priv;
-+	struct nand_chip *this = mtd_to_nand(mtd);
- 	int block, ret = 0;
- 
- 	block = (int)(offs >> this->bbt_erase_shift);
-@@ -1373,5 +1373,3 @@ int nand_markbad_bbt(struct mtd_info *mt
- 
- 	return ret;
- }
--
--EXPORT_SYMBOL(nand_scan_bbt);
---- a/drivers/mtd/nand/nand_bch.c
-+++ b/drivers/mtd/nand/nand_bch.c
-@@ -32,13 +32,11 @@
- /**
-  * struct nand_bch_control - private NAND BCH control structure
-  * @bch:       BCH control structure
-- * @ecclayout: private ecc layout for this BCH configuration
-  * @errloc:    error location array
-  * @eccmask:   XOR ecc mask, allows erased pages to be decoded as valid
-  */
- struct nand_bch_control {
- 	struct bch_control   *bch;
--	struct nand_ecclayout ecclayout;
- 	unsigned int         *errloc;
- 	unsigned char        *eccmask;
- };
-@@ -52,7 +50,7 @@ struct nand_bch_control {
- int nand_bch_calculate_ecc(struct mtd_info *mtd, const unsigned char *buf,
- 			   unsigned char *code)
- {
--	const struct nand_chip *chip = mtd->priv;
-+	const struct nand_chip *chip = mtd_to_nand(mtd);
- 	struct nand_bch_control *nbc = chip->ecc.priv;
- 	unsigned int i;
- 
-@@ -79,7 +77,7 @@ EXPORT_SYMBOL(nand_bch_calculate_ecc);
- int nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
- 			  unsigned char *read_ecc, unsigned char *calc_ecc)
- {
--	const struct nand_chip *chip = mtd->priv;
-+	const struct nand_chip *chip = mtd_to_nand(mtd);
- 	struct nand_bch_control *nbc = chip->ecc.priv;
- 	unsigned int *errloc = nbc->errloc;
- 	int i, count;
-@@ -98,7 +96,7 @@ int nand_bch_correct_data(struct mtd_inf
- 		}
- 	} else if (count < 0) {
- 		printk(KERN_ERR "ecc unrecoverable error\n");
--		count = -1;
-+		count = -EBADMSG;
- 	}
- 	return count;
- }
-@@ -107,9 +105,6 @@ EXPORT_SYMBOL(nand_bch_correct_data);
- /**
-  * nand_bch_init - [NAND Interface] Initialize NAND BCH error correction
-  * @mtd:	MTD block structure
-- * @eccsize:	ecc block size in bytes
-- * @eccbytes:	ecc length in bytes
-- * @ecclayout:	output default layout
-  *
-  * Returns:
-  *  a pointer to a new NAND BCH control structure, or NULL upon failure
-@@ -123,14 +118,20 @@ EXPORT_SYMBOL(nand_bch_correct_data);
-  * @eccsize = 512  (thus, m=13 is the smallest integer such that 2^m-1 > 512*8)
-  * @eccbytes = 7   (7 bytes are required to store m*t = 13*4 = 52 bits)
-  */
--struct nand_bch_control *
--nand_bch_init(struct mtd_info *mtd, unsigned int eccsize, unsigned int eccbytes,
--	      struct nand_ecclayout **ecclayout)
-+struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
- {
-+	struct nand_chip *nand = mtd_to_nand(mtd);
- 	unsigned int m, t, eccsteps, i;
--	struct nand_ecclayout *layout;
- 	struct nand_bch_control *nbc = NULL;
- 	unsigned char *erased_page;
-+	unsigned int eccsize = nand->ecc.size;
-+	unsigned int eccbytes = nand->ecc.bytes;
-+	unsigned int eccstrength = nand->ecc.strength;
-+
-+	if (!eccbytes && eccstrength) {
-+		eccbytes = DIV_ROUND_UP(eccstrength * fls(8 * eccsize), 8);
-+		nand->ecc.bytes = eccbytes;
-+	}
- 
- 	if (!eccsize || !eccbytes) {
- 		printk(KERN_WARNING "ecc parameters not supplied\n");
-@@ -158,7 +159,7 @@ nand_bch_init(struct mtd_info *mtd, unsi
- 	eccsteps = mtd->writesize/eccsize;
- 
- 	/* if no ecc placement scheme was provided, build one */
--	if (!*ecclayout) {
-+	if (!mtd->ooblayout) {
- 
- 		/* handle large page devices only */
- 		if (mtd->oobsize < 64) {
-@@ -167,24 +168,7 @@ nand_bch_init(struct mtd_info *mtd, unsi
- 			goto fail;
- 		}
- 
--		layout = &nbc->ecclayout;
--		layout->eccbytes = eccsteps*eccbytes;
--
--		/* reserve 2 bytes for bad block marker */
--		if (layout->eccbytes+2 > mtd->oobsize) {
--			printk(KERN_WARNING "no suitable oob scheme available "
--			       "for oobsize %d eccbytes %u\n", mtd->oobsize,
--			       eccbytes);
--			goto fail;
--		}
--		/* put ecc bytes at oob tail */
--		for (i = 0; i < layout->eccbytes; i++)
--			layout->eccpos[i] = mtd->oobsize-layout->eccbytes+i;
--
--		layout->oobfree[0].offset = 2;
--		layout->oobfree[0].length = mtd->oobsize-2-layout->eccbytes;
--
--		*ecclayout = layout;
-+		mtd_set_ooblayout(mtd, &nand_ooblayout_lp_ops);
- 	}
- 
- 	/* sanity checks */
-@@ -192,7 +176,8 @@ nand_bch_init(struct mtd_info *mtd, unsi
- 		printk(KERN_WARNING "eccsize %u is too large\n", eccsize);
- 		goto fail;
- 	}
--	if ((*ecclayout)->eccbytes != (eccsteps*eccbytes)) {
-+
-+	if (mtd_ooblayout_count_eccbytes(mtd) != (eccsteps*eccbytes)) {
- 		printk(KERN_WARNING "invalid ecc layout\n");
- 		goto fail;
- 	}
-@@ -216,6 +201,9 @@ nand_bch_init(struct mtd_info *mtd, unsi
- 	for (i = 0; i < eccbytes; i++)
- 		nbc->eccmask[i] ^= 0xff;
- 
-+	if (!eccstrength)
-+		nand->ecc.strength = (eccbytes * 8) / fls(8 * eccsize);
-+
- 	return nbc;
- fail:
- 	nand_bch_free(nbc);
---- a/drivers/mtd/nand/nand_ecc.c
-+++ b/drivers/mtd/nand/nand_ecc.c
-@@ -424,7 +424,7 @@ int nand_calculate_ecc(struct mtd_info *
- 		       unsigned char *code)
- {
- 	__nand_calculate_ecc(buf,
--			((struct nand_chip *)mtd->priv)->ecc.size, code);
-+			mtd_to_nand(mtd)->ecc.size, code);
- 
- 	return 0;
- }
-@@ -524,7 +524,7 @@ int nand_correct_data(struct mtd_info *m
- 		      unsigned char *read_ecc, unsigned char *calc_ecc)
- {
- 	return __nand_correct_data(buf, read_ecc, calc_ecc,
--				   ((struct nand_chip *)mtd->priv)->ecc.size);
-+				   mtd_to_nand(mtd)->ecc.size);
- }
- EXPORT_SYMBOL(nand_correct_data);
- 
---- a/drivers/mtd/nand/nand_ids.c
-+++ b/drivers/mtd/nand/nand_ids.c
-@@ -50,8 +50,8 @@ struct nand_flash_dev nand_flash_ids[] =
- 		  SZ_16K, SZ_8K, SZ_4M, 0, 6, 1280, NAND_ECC_INFO(40, SZ_1K) },
- 	{"H27UCG8T2ATR-BC 64G 3.3V 8-bit",
- 		{ .id = {0xad, 0xde, 0x94, 0xda, 0x74, 0xc4} },
--		  SZ_8K, SZ_8K, SZ_2M, 0, 6, 640, NAND_ECC_INFO(40, SZ_1K),
--		  4 },
-+		  SZ_8K, SZ_8K, SZ_2M, NAND_NEED_SCRAMBLING, 6, 640,
-+		  NAND_ECC_INFO(40, SZ_1K), 4 },
- 
- 	LEGACY_ID_NAND("NAND 4MiB 5V 8-bit",   0x6B, 4, SZ_8K, SP_OPTIONS),
- 	LEGACY_ID_NAND("NAND 4MiB 3,3V 8-bit", 0xE3, 4, SZ_8K, SP_OPTIONS),
---- a/drivers/mtd/nand/nandsim.c
-+++ b/drivers/mtd/nand/nandsim.c
-@@ -666,8 +666,8 @@ static char *get_partition_name(int i)
-  */
- static int init_nandsim(struct mtd_info *mtd)
- {
--	struct nand_chip *chip = mtd->priv;
--	struct nandsim   *ns   = chip->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
-+	struct nandsim   *ns   = nand_get_controller_data(chip);
- 	int i, ret = 0;
- 	uint64_t remains;
- 	uint64_t next_offset;
-@@ -1908,7 +1908,8 @@ static void switch_state(struct nandsim
- 
- static u_char ns_nand_read_byte(struct mtd_info *mtd)
- {
--	struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
-+	struct nandsim *ns = nand_get_controller_data(chip);
- 	u_char outb = 0x00;
- 
- 	/* Sanity and correctness checks */
-@@ -1969,7 +1970,8 @@ static u_char ns_nand_read_byte(struct m
- 
- static void ns_nand_write_byte(struct mtd_info *mtd, u_char byte)
- {
--	struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
-+	struct nandsim *ns = nand_get_controller_data(chip);
- 
- 	/* Sanity and correctness checks */
- 	if (!ns->lines.ce) {
-@@ -2123,7 +2125,8 @@ static void ns_nand_write_byte(struct mt
- 
- static void ns_hwcontrol(struct mtd_info *mtd, int cmd, unsigned int bitmask)
- {
--	struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
-+	struct nandsim *ns = nand_get_controller_data(chip);
- 
- 	ns->lines.cle = bitmask & NAND_CLE ? 1 : 0;
- 	ns->lines.ale = bitmask & NAND_ALE ? 1 : 0;
-@@ -2141,7 +2144,7 @@ static int ns_device_ready(struct mtd_in
- 
- static uint16_t ns_nand_read_word(struct mtd_info *mtd)
- {
--	struct nand_chip *chip = (struct nand_chip *)mtd->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
- 
- 	NS_DBG("read_word\n");
- 
-@@ -2150,7 +2153,8 @@ static uint16_t ns_nand_read_word(struct
- 
- static void ns_nand_write_buf(struct mtd_info *mtd, const u_char *buf, int len)
- {
--	struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
-+	struct nandsim *ns = nand_get_controller_data(chip);
- 
- 	/* Check that chip is expecting data input */
- 	if (!(ns->state & STATE_DATAIN_MASK)) {
-@@ -2177,7 +2181,8 @@ static void ns_nand_write_buf(struct mtd
- 
- static void ns_nand_read_buf(struct mtd_info *mtd, u_char *buf, int len)
- {
--	struct nandsim *ns = ((struct nand_chip *)mtd->priv)->priv;
-+	struct nand_chip *chip = mtd_to_nand(mtd);
-+	struct nandsim *ns = nand_get_controller_data(chip);
- 
- 	/* Sanity and correctness checks */
- 	if (!ns->lines.ce) {
-@@ -2198,7 +2203,7 @@ static void ns_nand_read_buf(struct mtd_
- 		int i;
- 
- 		for (i = 0; i < len; i++)
--			buf[i] = ((struct nand_chip *)mtd->priv)->read_byte(mtd);
-+			buf[i] = mtd_to_nand(mtd)->read_byte(mtd);
- 
- 		return;
- 	}
-@@ -2236,16 +2241,15 @@ static int __init ns_init_module(void)
- 	}
- 
- 	/* Allocate and initialize mtd_info, nand_chip and nandsim structures */
--	nsmtd = kzalloc(sizeof(struct mtd_info) + sizeof(struct nand_chip)
--				+ sizeof(struct nandsim), GFP_KERNEL);
--	if (!nsmtd) {
-+	chip = kzalloc(sizeof(struct nand_chip) + sizeof(struct nandsim),
-+		       GFP_KERNEL);
-+	if (!chip) {
- 		NS_ERR("unable to allocate core structures.\n");
- 		return -ENOMEM;
- 	}
--	chip        = (struct nand_chip *)(nsmtd + 1);
--        nsmtd->priv = (void *)chip;
-+	nsmtd       = nand_to_mtd(chip);
- 	nand        = (struct nandsim *)(chip + 1);
--	chip->priv  = (void *)nand;
-+	nand_set_controller_data(chip, (void *)nand);
- 
- 	/*
- 	 * Register simulator's callbacks.
-@@ -2257,6 +2261,7 @@ static int __init ns_init_module(void)
- 	chip->read_buf   = ns_nand_read_buf;
- 	chip->read_word  = ns_nand_read_word;
- 	chip->ecc.mode   = NAND_ECC_SOFT;
-+	chip->ecc.algo   = NAND_ECC_HAMMING;
- 	/* The NAND_SKIP_BBTSCAN option is necessary for 'overridesize' */
- 	/* and 'badblocks' parameters to work */
- 	chip->options   |= NAND_SKIP_BBTSCAN;
-@@ -2335,6 +2340,7 @@ static int __init ns_init_module(void)
- 			goto error;
- 		}
- 		chip->ecc.mode = NAND_ECC_SOFT_BCH;
-+		chip->ecc.algo = NAND_ECC_BCH;
- 		chip->ecc.size = 512;
- 		chip->ecc.strength = bch;
- 		chip->ecc.bytes = eccbytes;
-@@ -2392,7 +2398,7 @@ err_exit:
- 	for (i = 0;i < ARRAY_SIZE(nand->partitions); ++i)
- 		kfree(nand->partitions[i].name);
- error:
--	kfree(nsmtd);
-+	kfree(chip);
- 	free_lists();
- 
- 	return retval;
-@@ -2405,7 +2411,8 @@ module_init(ns_init_module);
-  */
- static void __exit ns_cleanup_module(void)
- {
--	struct nandsim *ns = ((struct nand_chip *)nsmtd->priv)->priv;
-+	struct nand_chip *chip = mtd_to_nand(nsmtd);
-+	struct nandsim *ns = nand_get_controller_data(chip);
- 	int i;
- 
- 	nandsim_debugfs_remove(ns);
-@@ -2413,7 +2420,7 @@ static void __exit ns_cleanup_module(voi
- 	nand_release(nsmtd); /* Unregister driver */
- 	for (i = 0;i < ARRAY_SIZE(ns->partitions); ++i)
- 		kfree(ns->partitions[i].name);
--	kfree(nsmtd);        /* Free other structures */
-+	kfree(mtd_to_nand(nsmtd));        /* Free other structures */
- 	free_lists();
- }
- 
---- a/drivers/mtd/ofpart.c
-+++ b/drivers/mtd/ofpart.c
-@@ -26,9 +26,10 @@ static bool node_has_compatible(struct d
- }
- 
- static int parse_ofpart_partitions(struct mtd_info *master,
--				   struct mtd_partition **pparts,
-+				   const struct mtd_partition **pparts,
- 				   struct mtd_part_parser_data *data)
- {
-+	struct mtd_partition *parts;
- 	struct device_node *mtd_node;
- 	struct device_node *ofpart_node;
- 	const char *partname;
-@@ -37,10 +38,8 @@ static int parse_ofpart_partitions(struc
- 	bool dedicated = true;
- 
- 
--	if (!data)
--		return 0;
--
--	mtd_node = data->of_node;
-+	/* Pull of_node from the master device node */
-+	mtd_node = mtd_get_of_node(master);
- 	if (!mtd_node)
- 		return 0;
- 
-@@ -72,8 +71,8 @@ static int parse_ofpart_partitions(struc
- 	if (nr_parts == 0)
- 		return 0;
- 
--	*pparts = kzalloc(nr_parts * sizeof(**pparts), GFP_KERNEL);
--	if (!*pparts)
-+	parts = kzalloc(nr_parts * sizeof(*parts), GFP_KERNEL);
-+	if (!parts)
- 		return -ENOMEM;
- 
- 	i = 0;
-@@ -107,19 +106,19 @@ static int parse_ofpart_partitions(struc
- 			goto ofpart_fail;
- 		}
- 
--		(*pparts)[i].offset = of_read_number(reg, a_cells);
--		(*pparts)[i].size = of_read_number(reg + a_cells, s_cells);
-+		parts[i].offset = of_read_number(reg, a_cells);
-+		parts[i].size = of_read_number(reg + a_cells, s_cells);
- 
- 		partname = of_get_property(pp, "label", &len);
- 		if (!partname)
- 			partname = of_get_property(pp, "name", &len);
--		(*pparts)[i].name = partname;
-+		parts[i].name = partname;
- 
- 		if (of_get_property(pp, "read-only", &len))
--			(*pparts)[i].mask_flags |= MTD_WRITEABLE;
-+			parts[i].mask_flags |= MTD_WRITEABLE;
- 
- 		if (of_get_property(pp, "lock", &len))
--			(*pparts)[i].mask_flags |= MTD_POWERUP_LOCK;
-+			parts[i].mask_flags |= MTD_POWERUP_LOCK;
- 
- 		i++;
- 	}
-@@ -127,6 +126,7 @@ static int parse_ofpart_partitions(struc
- 	if (!nr_parts)
- 		goto ofpart_none;
- 
-+	*pparts = parts;
- 	return nr_parts;
- 
- ofpart_fail:
-@@ -135,21 +135,20 @@ ofpart_fail:
- 	ret = -EINVAL;
- ofpart_none:
- 	of_node_put(pp);
--	kfree(*pparts);
--	*pparts = NULL;
-+	kfree(parts);
- 	return ret;
- }
- 
- static struct mtd_part_parser ofpart_parser = {
--	.owner = THIS_MODULE,
- 	.parse_fn = parse_ofpart_partitions,
- 	.name = "ofpart",
- };
- 
- static int parse_ofoldpart_partitions(struct mtd_info *master,
--				      struct mtd_partition **pparts,
-+				      const struct mtd_partition **pparts,
- 				      struct mtd_part_parser_data *data)
- {
-+	struct mtd_partition *parts;
- 	struct device_node *dp;
- 	int i, plen, nr_parts;
- 	const struct {
-@@ -157,10 +156,8 @@ static int parse_ofoldpart_partitions(st
- 	} *part;
- 	const char *names;
- 
--	if (!data)
--		return 0;
--
--	dp = data->of_node;
-+	/* Pull of_node from the master device node */
-+	dp = mtd_get_of_node(master);
- 	if (!dp)
- 		return 0;
- 
-@@ -173,37 +170,37 @@ static int parse_ofoldpart_partitions(st
- 
- 	nr_parts = plen / sizeof(part[0]);
- 
--	*pparts = kzalloc(nr_parts * sizeof(*(*pparts)), GFP_KERNEL);
--	if (!*pparts)
-+	parts = kzalloc(nr_parts * sizeof(*parts), GFP_KERNEL);
-+	if (!parts)
- 		return -ENOMEM;
- 
- 	names = of_get_property(dp, "partition-names", &plen);
- 
- 	for (i = 0; i < nr_parts; i++) {
--		(*pparts)[i].offset = be32_to_cpu(part->offset);
--		(*pparts)[i].size   = be32_to_cpu(part->len) & ~1;
-+		parts[i].offset = be32_to_cpu(part->offset);
-+		parts[i].size   = be32_to_cpu(part->len) & ~1;
- 		/* bit 0 set signifies read only partition */
- 		if (be32_to_cpu(part->len) & 1)
--			(*pparts)[i].mask_flags = MTD_WRITEABLE;
-+			parts[i].mask_flags = MTD_WRITEABLE;
- 
- 		if (names && (plen > 0)) {
- 			int len = strlen(names) + 1;
- 
--			(*pparts)[i].name = names;
-+			parts[i].name = names;
- 			plen -= len;
- 			names += len;
- 		} else {
--			(*pparts)[i].name = "unnamed";
-+			parts[i].name = "unnamed";
- 		}
- 
- 		part++;
- 	}
- 
-+	*pparts = parts;
- 	return nr_parts;
- }
- 
- static struct mtd_part_parser ofoldpart_parser = {
--	.owner = THIS_MODULE,
- 	.parse_fn = parse_ofoldpart_partitions,
- 	.name = "ofoldpart",
- };
---- a/drivers/mtd/spi-nor/Kconfig
-+++ b/drivers/mtd/spi-nor/Kconfig
-@@ -7,6 +7,14 @@ menuconfig MTD_SPI_NOR
- 
- if MTD_SPI_NOR
- 
-+config MTD_MT81xx_NOR
-+	tristate "Mediatek MT81xx SPI NOR flash controller"
-+	depends on HAS_IOMEM
-+	help
-+	  This enables access to SPI NOR flash, using MT81xx SPI NOR flash
-+	  controller. This controller does not support generic SPI BUS, it only
-+	  supports SPI NOR Flash.
-+
- config MTD_SPI_NOR_USE_4K_SECTORS
- 	bool "Use small 4096 B erase sectors"
- 	default y
-@@ -23,7 +31,7 @@ config MTD_SPI_NOR_USE_4K_SECTORS
- 
- config SPI_FSL_QUADSPI
- 	tristate "Freescale Quad SPI controller"
--	depends on ARCH_MXC || COMPILE_TEST
-+	depends on ARCH_MXC || SOC_LS1021A || ARCH_LAYERSCAPE || COMPILE_TEST
- 	depends on HAS_IOMEM
- 	help
- 	  This enables support for the Quad SPI controller in master mode.
---- a/drivers/mtd/spi-nor/Makefile
-+++ b/drivers/mtd/spi-nor/Makefile
-@@ -1,3 +1,4 @@
- obj-$(CONFIG_MTD_SPI_NOR)	+= spi-nor.o
- obj-$(CONFIG_SPI_FSL_QUADSPI)	+= fsl-quadspi.o
-+obj-$(CONFIG_MTD_MT81xx_NOR)    += mtk-quadspi.o
- obj-$(CONFIG_SPI_NXP_SPIFI)	+= nxp-spifi.o
---- /dev/null
-+++ b/drivers/mtd/spi-nor/mtk-quadspi.c
-@@ -0,0 +1,485 @@
-+/*
-+ * Copyright (c) 2015 MediaTek Inc.
-+ * Author: Bayi Cheng <bayi.cheng@mediatek.com>
-+ *
-+ * This program is free software; you can redistribute it and/or modify
-+ * it under the terms of the GNU General Public License version 2 as
-+ * published by the Free Software Foundation.
-+ *
-+ * This program is distributed in the hope that it will be useful,
-+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
-+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-+ * GNU General Public License for more details.
-+ */
-+
-+#include <linux/clk.h>
-+#include <linux/delay.h>
-+#include <linux/device.h>
-+#include <linux/init.h>
-+#include <linux/io.h>
-+#include <linux/iopoll.h>
-+#include <linux/ioport.h>
-+#include <linux/math64.h>
-+#include <linux/module.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mutex.h>
-+#include <linux/of.h>
-+#include <linux/of_device.h>
-+#include <linux/pinctrl/consumer.h>
-+#include <linux/platform_device.h>
-+#include <linux/slab.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/mtd/spi-nor.h>
-+
-+#define MTK_NOR_CMD_REG			0x00
-+#define MTK_NOR_CNT_REG			0x04
-+#define MTK_NOR_RDSR_REG		0x08
-+#define MTK_NOR_RDATA_REG		0x0c
-+#define MTK_NOR_RADR0_REG		0x10
-+#define MTK_NOR_RADR1_REG		0x14
-+#define MTK_NOR_RADR2_REG		0x18
-+#define MTK_NOR_WDATA_REG		0x1c
-+#define MTK_NOR_PRGDATA0_REG		0x20
-+#define MTK_NOR_PRGDATA1_REG		0x24
-+#define MTK_NOR_PRGDATA2_REG		0x28
-+#define MTK_NOR_PRGDATA3_REG		0x2c
-+#define MTK_NOR_PRGDATA4_REG		0x30
-+#define MTK_NOR_PRGDATA5_REG		0x34
-+#define MTK_NOR_SHREG0_REG		0x38
-+#define MTK_NOR_SHREG1_REG		0x3c
-+#define MTK_NOR_SHREG2_REG		0x40
-+#define MTK_NOR_SHREG3_REG		0x44
-+#define MTK_NOR_SHREG4_REG		0x48
-+#define MTK_NOR_SHREG5_REG		0x4c
-+#define MTK_NOR_SHREG6_REG		0x50
-+#define MTK_NOR_SHREG7_REG		0x54
-+#define MTK_NOR_SHREG8_REG		0x58
-+#define MTK_NOR_SHREG9_REG		0x5c
-+#define MTK_NOR_CFG1_REG		0x60
-+#define MTK_NOR_CFG2_REG		0x64
-+#define MTK_NOR_CFG3_REG		0x68
-+#define MTK_NOR_STATUS0_REG		0x70
-+#define MTK_NOR_STATUS1_REG		0x74
-+#define MTK_NOR_STATUS2_REG		0x78
-+#define MTK_NOR_STATUS3_REG		0x7c
-+#define MTK_NOR_FLHCFG_REG		0x84
-+#define MTK_NOR_TIME_REG		0x94
-+#define MTK_NOR_PP_DATA_REG		0x98
-+#define MTK_NOR_PREBUF_STUS_REG		0x9c
-+#define MTK_NOR_DELSEL0_REG		0xa0
-+#define MTK_NOR_DELSEL1_REG		0xa4
-+#define MTK_NOR_INTRSTUS_REG		0xa8
-+#define MTK_NOR_INTREN_REG		0xac
-+#define MTK_NOR_CHKSUM_CTL_REG		0xb8
-+#define MTK_NOR_CHKSUM_REG		0xbc
-+#define MTK_NOR_CMD2_REG		0xc0
-+#define MTK_NOR_WRPROT_REG		0xc4
-+#define MTK_NOR_RADR3_REG		0xc8
-+#define MTK_NOR_DUAL_REG		0xcc
-+#define MTK_NOR_DELSEL2_REG		0xd0
-+#define MTK_NOR_DELSEL3_REG		0xd4
-+#define MTK_NOR_DELSEL4_REG		0xd8
-+
-+/* commands for mtk nor controller */
-+#define MTK_NOR_READ_CMD		0x0
-+#define MTK_NOR_RDSR_CMD		0x2
-+#define MTK_NOR_PRG_CMD			0x4
-+#define MTK_NOR_WR_CMD			0x10
-+#define MTK_NOR_PIO_WR_CMD		0x90
-+#define MTK_NOR_WRSR_CMD		0x20
-+#define MTK_NOR_PIO_READ_CMD		0x81
-+#define MTK_NOR_WR_BUF_ENABLE		0x1
-+#define MTK_NOR_WR_BUF_DISABLE		0x0
-+#define MTK_NOR_ENABLE_SF_CMD		0x30
-+#define MTK_NOR_DUAD_ADDR_EN		0x8
-+#define MTK_NOR_QUAD_READ_EN		0x4
-+#define MTK_NOR_DUAL_ADDR_EN		0x2
-+#define MTK_NOR_DUAL_READ_EN		0x1
-+#define MTK_NOR_DUAL_DISABLE		0x0
-+#define MTK_NOR_FAST_READ		0x1
-+
-+#define SFLASH_WRBUF_SIZE		128
-+
-+/* Can shift up to 48 bits (6 bytes) of TX/RX */
-+#define MTK_NOR_MAX_RX_TX_SHIFT		6
-+/* can shift up to 56 bits (7 bytes) transfer by MTK_NOR_PRG_CMD */
-+#define MTK_NOR_MAX_SHIFT		7
-+
-+/* Helpers for accessing the program data / shift data registers */
-+#define MTK_NOR_PRG_REG(n)		(MTK_NOR_PRGDATA0_REG + 4 * (n))
-+#define MTK_NOR_SHREG(n)		(MTK_NOR_SHREG0_REG + 4 * (n))
-+
-+struct mt8173_nor {
-+	struct spi_nor nor;
-+	struct device *dev;
-+	void __iomem *base;	/* nor flash base address */
-+	struct clk *spi_clk;
-+	struct clk *nor_clk;
-+};
-+
-+static void mt8173_nor_set_read_mode(struct mt8173_nor *mt8173_nor)
-+{
-+	struct spi_nor *nor = &mt8173_nor->nor;
-+
-+	switch (nor->flash_read) {
-+	case SPI_NOR_FAST:
-+		writeb(nor->read_opcode, mt8173_nor->base +
-+		       MTK_NOR_PRGDATA3_REG);
-+		writeb(MTK_NOR_FAST_READ, mt8173_nor->base +
-+		       MTK_NOR_CFG1_REG);
-+		break;
-+	case SPI_NOR_DUAL:
-+		writeb(nor->read_opcode, mt8173_nor->base +
-+		       MTK_NOR_PRGDATA3_REG);
-+		writeb(MTK_NOR_DUAL_READ_EN, mt8173_nor->base +
-+		       MTK_NOR_DUAL_REG);
-+		break;
-+	case SPI_NOR_QUAD:
-+		writeb(nor->read_opcode, mt8173_nor->base +
-+		       MTK_NOR_PRGDATA4_REG);
-+		writeb(MTK_NOR_QUAD_READ_EN, mt8173_nor->base +
-+		       MTK_NOR_DUAL_REG);
-+		break;
-+	default:
-+		writeb(MTK_NOR_DUAL_DISABLE, mt8173_nor->base +
-+		       MTK_NOR_DUAL_REG);
-+		break;
-+	}
-+}
-+
-+static int mt8173_nor_execute_cmd(struct mt8173_nor *mt8173_nor, u8 cmdval)
-+{
-+	int reg;
-+	u8 val = cmdval & 0x1f;
-+
-+	writeb(cmdval, mt8173_nor->base + MTK_NOR_CMD_REG);
-+	return readl_poll_timeout(mt8173_nor->base + MTK_NOR_CMD_REG, reg,
-+				  !(reg & val), 100, 10000);
-+}
-+
-+static int mt8173_nor_do_tx_rx(struct mt8173_nor *mt8173_nor, u8 op,
-+			       u8 *tx, int txlen, u8 *rx, int rxlen)
-+{
-+	int len = 1 + txlen + rxlen;
-+	int i, ret, idx;
-+
-+	if (len > MTK_NOR_MAX_SHIFT)
-+		return -EINVAL;
-+
-+	writeb(len * 8, mt8173_nor->base + MTK_NOR_CNT_REG);
-+
-+	/* start at PRGDATA5, go down to PRGDATA0 */
-+	idx = MTK_NOR_MAX_RX_TX_SHIFT - 1;
-+
-+	/* opcode */
-+	writeb(op, mt8173_nor->base + MTK_NOR_PRG_REG(idx));
-+	idx--;
-+
-+	/* program TX data */
-+	for (i = 0; i < txlen; i++, idx--)
-+		writeb(tx[i], mt8173_nor->base + MTK_NOR_PRG_REG(idx));
-+
-+	/* clear out rest of TX registers */
-+	while (idx >= 0) {
-+		writeb(0, mt8173_nor->base + MTK_NOR_PRG_REG(idx));
-+		idx--;
-+	}
-+
-+	ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PRG_CMD);
-+	if (ret)
-+		return ret;
-+
-+	/* restart at first RX byte */
-+	idx = rxlen - 1;
-+
-+	/* read out RX data */
-+	for (i = 0; i < rxlen; i++, idx--)
-+		rx[i] = readb(mt8173_nor->base + MTK_NOR_SHREG(idx));
-+
-+	return 0;
-+}
-+
-+/* Do a WRSR (Write Status Register) command */
-+static int mt8173_nor_wr_sr(struct mt8173_nor *mt8173_nor, u8 sr)
-+{
-+	writeb(sr, mt8173_nor->base + MTK_NOR_PRGDATA5_REG);
-+	writeb(8, mt8173_nor->base + MTK_NOR_CNT_REG);
-+	return mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WRSR_CMD);
-+}
-+
-+static int mt8173_nor_write_buffer_enable(struct mt8173_nor *mt8173_nor)
-+{
-+	u8 reg;
-+
-+	/* the bit0 of MTK_NOR_CFG2_REG is pre-fetch buffer
-+	 * 0: pre-fetch buffer use for read
-+	 * 1: pre-fetch buffer use for page program
-+	 */
-+	writel(MTK_NOR_WR_BUF_ENABLE, mt8173_nor->base + MTK_NOR_CFG2_REG);
-+	return readb_poll_timeout(mt8173_nor->base + MTK_NOR_CFG2_REG, reg,
-+				  0x01 == (reg & 0x01), 100, 10000);
-+}
-+
-+static int mt8173_nor_write_buffer_disable(struct mt8173_nor *mt8173_nor)
-+{
-+	u8 reg;
-+
-+	writel(MTK_NOR_WR_BUF_DISABLE, mt8173_nor->base + MTK_NOR_CFG2_REG);
-+	return readb_poll_timeout(mt8173_nor->base + MTK_NOR_CFG2_REG, reg,
-+				  MTK_NOR_WR_BUF_DISABLE == (reg & 0x1), 100,
-+				  10000);
-+}
-+
-+static void mt8173_nor_set_addr(struct mt8173_nor *mt8173_nor, u32 addr)
-+{
-+	int i;
-+
-+	for (i = 0; i < 3; i++) {
-+		writeb(addr & 0xff, mt8173_nor->base + MTK_NOR_RADR0_REG + i * 4);
-+		addr >>= 8;
-+	}
-+	/* Last register is non-contiguous */
-+	writeb(addr & 0xff, mt8173_nor->base + MTK_NOR_RADR3_REG);
-+}
-+
-+static int mt8173_nor_read(struct spi_nor *nor, loff_t from, size_t length,
-+			   size_t *retlen, u_char *buffer)
-+{
-+	int i, ret;
-+	int addr = (int)from;
-+	u8 *buf = (u8 *)buffer;
-+	struct mt8173_nor *mt8173_nor = nor->priv;
-+
-+	/* set mode for fast read mode ,dual mode or quad mode */
-+	mt8173_nor_set_read_mode(mt8173_nor);
-+	mt8173_nor_set_addr(mt8173_nor, addr);
-+
-+	for (i = 0; i < length; i++, (*retlen)++) {
-+		ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PIO_READ_CMD);
-+		if (ret < 0)
-+			return ret;
-+		buf[i] = readb(mt8173_nor->base + MTK_NOR_RDATA_REG);
-+	}
-+	return 0;
-+}
-+
-+static int mt8173_nor_write_single_byte(struct mt8173_nor *mt8173_nor,
-+					int addr, int length, u8 *data)
-+{
-+	int i, ret;
-+
-+	mt8173_nor_set_addr(mt8173_nor, addr);
-+
-+	for (i = 0; i < length; i++) {
-+		writeb(*data++, mt8173_nor->base + MTK_NOR_WDATA_REG);
-+		ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_PIO_WR_CMD);
-+		if (ret < 0)
-+			return ret;
-+	}
-+	return 0;
-+}
-+
-+static int mt8173_nor_write_buffer(struct mt8173_nor *mt8173_nor, int addr,
-+				   const u8 *buf)
-+{
-+	int i, bufidx, data;
-+
-+	mt8173_nor_set_addr(mt8173_nor, addr);
-+
-+	bufidx = 0;
-+	for (i = 0; i < SFLASH_WRBUF_SIZE; i += 4) {
-+		data = buf[bufidx + 3]<<24 | buf[bufidx + 2]<<16 |
-+		       buf[bufidx + 1]<<8 | buf[bufidx];
-+		bufidx += 4;
-+		writel(data, mt8173_nor->base + MTK_NOR_PP_DATA_REG);
-+	}
-+	return mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_WR_CMD);
-+}
-+
-+static void mt8173_nor_write(struct spi_nor *nor, loff_t to, size_t len,
-+			     size_t *retlen, const u_char *buf)
-+{
-+	int ret;
-+	struct mt8173_nor *mt8173_nor = nor->priv;
-+
-+	ret = mt8173_nor_write_buffer_enable(mt8173_nor);
-+	if (ret < 0)
-+		dev_warn(mt8173_nor->dev, "write buffer enable failed!\n");
-+
-+	while (len >= SFLASH_WRBUF_SIZE) {
-+		ret = mt8173_nor_write_buffer(mt8173_nor, to, buf);
-+		if (ret < 0)
-+			dev_err(mt8173_nor->dev, "write buffer failed!\n");
-+		len -= SFLASH_WRBUF_SIZE;
-+		to += SFLASH_WRBUF_SIZE;
-+		buf += SFLASH_WRBUF_SIZE;
-+		(*retlen) += SFLASH_WRBUF_SIZE;
-+	}
-+	ret = mt8173_nor_write_buffer_disable(mt8173_nor);
-+	if (ret < 0)
-+		dev_warn(mt8173_nor->dev, "write buffer disable failed!\n");
-+
-+	if (len) {
-+		ret = mt8173_nor_write_single_byte(mt8173_nor, to, (int)len,
-+						   (u8 *)buf);
-+		if (ret < 0)
-+			dev_err(mt8173_nor->dev, "write single byte failed!\n");
-+		(*retlen) += len;
-+	}
-+}
-+
-+static int mt8173_nor_read_reg(struct spi_nor *nor, u8 opcode, u8 *buf, int len)
-+{
-+	int ret;
-+	struct mt8173_nor *mt8173_nor = nor->priv;
-+
-+	switch (opcode) {
-+	case SPINOR_OP_RDSR:
-+		ret = mt8173_nor_execute_cmd(mt8173_nor, MTK_NOR_RDSR_CMD);
-+		if (ret < 0)
-+			return ret;
-+		if (len == 1)
-+			*buf = readb(mt8173_nor->base + MTK_NOR_RDSR_REG);
-+		else
-+			dev_err(mt8173_nor->dev, "len should be 1 for read status!\n");
-+		break;
-+	default:
-+		ret = mt8173_nor_do_tx_rx(mt8173_nor, opcode, NULL, 0, buf, len);
-+		break;
-+	}
-+	return ret;
-+}
-+
-+static int mt8173_nor_write_reg(struct spi_nor *nor, u8 opcode, u8 *buf,
-+				int len)
-+{
-+	int ret;
-+	struct mt8173_nor *mt8173_nor = nor->priv;
-+
-+	switch (opcode) {
-+	case SPINOR_OP_WRSR:
-+		/* We only handle 1 byte */
-+		ret = mt8173_nor_wr_sr(mt8173_nor, *buf);
-+		break;
-+	default:
-+		ret = mt8173_nor_do_tx_rx(mt8173_nor, opcode, buf, len, NULL, 0);
-+		if (ret)
-+			dev_warn(mt8173_nor->dev, "write reg failure!\n");
-+		break;
-+	}
-+	return ret;
-+}
-+
-+static int mtk_nor_init(struct mt8173_nor *mt8173_nor,
-+			struct device_node *flash_node)
-+{
-+	int ret;
-+	struct spi_nor *nor;
-+
-+	/* initialize controller to accept commands */
-+	writel(MTK_NOR_ENABLE_SF_CMD, mt8173_nor->base + MTK_NOR_WRPROT_REG);
-+
-+	nor = &mt8173_nor->nor;
-+	nor->dev = mt8173_nor->dev;
-+	nor->priv = mt8173_nor;
-+	spi_nor_set_flash_node(nor, flash_node);
-+
-+	/* fill the hooks to spi nor */
-+	nor->read = mt8173_nor_read;
-+	nor->read_reg = mt8173_nor_read_reg;
-+	nor->write = mt8173_nor_write;
-+	nor->write_reg = mt8173_nor_write_reg;
-+	nor->mtd.name = "mtk_nor";
-+	/* initialized with NULL */
-+	ret = spi_nor_scan(nor, NULL, SPI_NOR_DUAL);
-+	if (ret)
-+		return ret;
-+
-+	return mtd_device_register(&nor->mtd, NULL, 0);
-+}
-+
-+static int mtk_nor_drv_probe(struct platform_device *pdev)
-+{
-+	struct device_node *flash_np;
-+	struct resource *res;
-+	int ret;
-+	struct mt8173_nor *mt8173_nor;
-+
-+	if (!pdev->dev.of_node) {
-+		dev_err(&pdev->dev, "No DT found\n");
-+		return -EINVAL;
-+	}
-+
-+	mt8173_nor = devm_kzalloc(&pdev->dev, sizeof(*mt8173_nor), GFP_KERNEL);
-+	if (!mt8173_nor)
-+		return -ENOMEM;
-+	platform_set_drvdata(pdev, mt8173_nor);
-+
-+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
-+	mt8173_nor->base = devm_ioremap_resource(&pdev->dev, res);
-+	if (IS_ERR(mt8173_nor->base))
-+		return PTR_ERR(mt8173_nor->base);
-+
-+	mt8173_nor->spi_clk = devm_clk_get(&pdev->dev, "spi");
-+	if (IS_ERR(mt8173_nor->spi_clk))
-+		return PTR_ERR(mt8173_nor->spi_clk);
-+
-+	mt8173_nor->nor_clk = devm_clk_get(&pdev->dev, "sf");
-+	if (IS_ERR(mt8173_nor->nor_clk))
-+		return PTR_ERR(mt8173_nor->nor_clk);
-+
-+	mt8173_nor->dev = &pdev->dev;
-+	ret = clk_prepare_enable(mt8173_nor->spi_clk);
-+	if (ret)
-+		return ret;
-+
-+	ret = clk_prepare_enable(mt8173_nor->nor_clk);
-+	if (ret) {
-+		clk_disable_unprepare(mt8173_nor->spi_clk);
-+		return ret;
-+	}
-+	/* only support one attached flash */
-+	flash_np = of_get_next_available_child(pdev->dev.of_node, NULL);
-+	if (!flash_np) {
-+		dev_err(&pdev->dev, "no SPI flash device to configure\n");
-+		ret = -ENODEV;
-+		goto nor_free;
-+	}
-+	ret = mtk_nor_init(mt8173_nor, flash_np);
-+
-+nor_free:
-+	if (ret) {
-+		clk_disable_unprepare(mt8173_nor->spi_clk);
-+		clk_disable_unprepare(mt8173_nor->nor_clk);
-+	}
-+	return ret;
-+}
-+
-+static int mtk_nor_drv_remove(struct platform_device *pdev)
-+{
-+	struct mt8173_nor *mt8173_nor = platform_get_drvdata(pdev);
-+
-+	clk_disable_unprepare(mt8173_nor->spi_clk);
-+	clk_disable_unprepare(mt8173_nor->nor_clk);
-+	return 0;
-+}
-+
-+static const struct of_device_id mtk_nor_of_ids[] = {
-+	{ .compatible = "mediatek,mt8173-nor"},
-+	{ /* sentinel */ }
-+};
-+MODULE_DEVICE_TABLE(of, mtk_nor_of_ids);
-+
-+static struct platform_driver mtk_nor_driver = {
-+	.probe = mtk_nor_drv_probe,
-+	.remove = mtk_nor_drv_remove,
-+	.driver = {
-+		.name = "mtk-nor",
-+		.of_match_table = mtk_nor_of_ids,
-+	},
-+};
-+
-+module_platform_driver(mtk_nor_driver);
-+MODULE_LICENSE("GPL v2");
-+MODULE_DESCRIPTION("MediaTek SPI NOR Flash Driver");
---- a/drivers/mtd/spi-nor/spi-nor.c
-+++ b/drivers/mtd/spi-nor/spi-nor.c
-@@ -38,6 +38,7 @@
- #define CHIP_ERASE_2MB_READY_WAIT_JIFFIES	(40UL * HZ)
- 
- #define SPI_NOR_MAX_ID_LEN	6
-+#define SPI_NOR_MAX_ADDR_WIDTH	4
- 
- struct flash_info {
- 	char		*name;
-@@ -60,15 +61,20 @@ struct flash_info {
- 	u16		addr_width;
- 
- 	u16		flags;
--#define	SECT_4K			0x01	/* SPINOR_OP_BE_4K works uniformly */
--#define	SPI_NOR_NO_ERASE	0x02	/* No erase command needed */
--#define	SST_WRITE		0x04	/* use SST byte programming */
--#define	SPI_NOR_NO_FR		0x08	/* Can't do fastread */
--#define	SECT_4K_PMC		0x10	/* SPINOR_OP_BE_4K_PMC works uniformly */
--#define	SPI_NOR_DUAL_READ	0x20    /* Flash supports Dual Read */
--#define	SPI_NOR_QUAD_READ	0x40    /* Flash supports Quad Read */
--#define	USE_FSR			0x80	/* use flag status register */
--#define	SPI_NOR_HAS_LOCK	0x100	/* Flash supports lock/unlock via SR */
-+#define SECT_4K			BIT(0)	/* SPINOR_OP_BE_4K works uniformly */
-+#define SPI_NOR_NO_ERASE	BIT(1)	/* No erase command needed */
-+#define SST_WRITE		BIT(2)	/* use SST byte programming */
-+#define SPI_NOR_NO_FR		BIT(3)	/* Can't do fastread */
-+#define SECT_4K_PMC		BIT(4)	/* SPINOR_OP_BE_4K_PMC works uniformly */
-+#define SPI_NOR_DUAL_READ	BIT(5)	/* Flash supports Dual Read */
-+#define SPI_NOR_QUAD_READ	BIT(6)	/* Flash supports Quad Read */
-+#define USE_FSR			BIT(7)	/* use flag status register */
-+#define SPI_NOR_HAS_LOCK	BIT(8)	/* Flash supports lock/unlock via SR */
-+#define SPI_NOR_HAS_TB		BIT(9)	/*
-+					 * Flash SR has Top/Bottom (TB) protect
-+					 * bit. Must be used with
-+					 * SPI_NOR_HAS_LOCK.
-+					 */
- };
- 
- #define JEDEC_MFR(info)	((info)->id[0])
-@@ -314,6 +320,29 @@ static void spi_nor_unlock_and_unprep(st
- }
- 
- /*
-+ * Initiate the erasure of a single sector
-+ */
-+static int spi_nor_erase_sector(struct spi_nor *nor, u32 addr)
-+{
-+	u8 buf[SPI_NOR_MAX_ADDR_WIDTH];
-+	int i;
-+
-+	if (nor->erase)
-+		return nor->erase(nor, addr);
-+
-+	/*
-+	 * Default implementation, if driver doesn't have a specialized HW
-+	 * control
-+	 */
-+	for (i = nor->addr_width - 1; i >= 0; i--) {
-+		buf[i] = addr & 0xff;
-+		addr >>= 8;
-+	}
-+
-+	return nor->write_reg(nor, nor->erase_opcode, buf, nor->addr_width);
-+}
-+
-+/*
-  * Erase an address range on the nor chip.  The address range may extend
-  * one or more erase sectors.  Return an error is there is a problem erasing.
-  */
-@@ -372,10 +401,9 @@ static int spi_nor_erase(struct mtd_info
- 		while (len) {
- 			write_enable(nor);
- 
--			if (nor->erase(nor, addr)) {
--				ret = -EIO;
-+			ret = spi_nor_erase_sector(nor, addr);
-+			if (ret)
- 				goto erase_err;
--			}
- 
- 			addr += mtd->erasesize;
- 			len -= mtd->erasesize;
-@@ -388,17 +416,13 @@ static int spi_nor_erase(struct mtd_info
- 
- 	write_disable(nor);
- 
-+erase_err:
- 	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
- 
--	instr->state = MTD_ERASE_DONE;
-+	instr->state = ret ? MTD_ERASE_FAILED : MTD_ERASE_DONE;
- 	mtd_erase_callback(instr);
- 
- 	return ret;
--
--erase_err:
--	spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
--	instr->state = MTD_ERASE_FAILED;
--	return ret;
- }
- 
- static void stm_get_locked_range(struct spi_nor *nor, u8 sr, loff_t *ofs,
-@@ -416,32 +440,58 @@ static void stm_get_locked_range(struct
- 	} else {
- 		pow = ((sr & mask) ^ mask) >> shift;
- 		*len = mtd->size >> pow;
--		*ofs = mtd->size - *len;
-+		if (nor->flags & SNOR_F_HAS_SR_TB && sr & SR_TB)
-+			*ofs = 0;
-+		else
-+			*ofs = mtd->size - *len;
- 	}
- }
- 
- /*
-- * Return 1 if the entire region is locked, 0 otherwise
-+ * Return 1 if the entire region is locked (if @locked is true) or unlocked (if
-+ * @locked is false); 0 otherwise
-  */
--static int stm_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
--			    u8 sr)
-+static int stm_check_lock_status_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
-+				    u8 sr, bool locked)
- {
- 	loff_t lock_offs;
- 	uint64_t lock_len;
- 
-+	if (!len)
-+		return 1;
-+
- 	stm_get_locked_range(nor, sr, &lock_offs, &lock_len);
- 
--	return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs);
-+	if (locked)
-+		/* Requested range is a sub-range of locked range */
-+		return (ofs + len <= lock_offs + lock_len) && (ofs >= lock_offs);
-+	else
-+		/* Requested range does not overlap with locked range */
-+		return (ofs >= lock_offs + lock_len) || (ofs + len <= lock_offs);
-+}
-+
-+static int stm_is_locked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
-+			    u8 sr)
-+{
-+	return stm_check_lock_status_sr(nor, ofs, len, sr, true);
-+}
-+
-+static int stm_is_unlocked_sr(struct spi_nor *nor, loff_t ofs, uint64_t len,
-+			      u8 sr)
-+{
-+	return stm_check_lock_status_sr(nor, ofs, len, sr, false);
- }
- 
- /*
-  * Lock a region of the flash. Compatible with ST Micro and similar flash.
-- * Supports only the block protection bits BP{0,1,2} in the status register
-+ * Supports the block protection bits BP{0,1,2} in the status register
-  * (SR). Does not support these features found in newer SR bitfields:
-- *   - TB: top/bottom protect - only handle TB=0 (top protect)
-  *   - SEC: sector/block protect - only handle SEC=0 (block protect)
-  *   - CMP: complement protect - only support CMP=0 (range is not complemented)
-  *
-+ * Support for the following is provided conditionally for some flash:
-+ *   - TB: top/bottom protect
-+ *
-  * Sample table portion for 8MB flash (Winbond w25q64fw):
-  *
-  *   SEC  |  TB   |  BP2  |  BP1  |  BP0  |  Prot Length  | Protected Portion
-@@ -454,26 +504,55 @@ static int stm_is_locked_sr(struct spi_n
-  *    0   |   0   |   1   |   0   |   1   |  2 MB         | Upper 1/4
-  *    0   |   0   |   1   |   1   |   0   |  4 MB         | Upper 1/2
-  *    X   |   X   |   1   |   1   |   1   |  8 MB         | ALL
-+ *  ------|-------|-------|-------|-------|---------------|-------------------
-+ *    0   |   1   |   0   |   0   |   1   |  128 KB       | Lower 1/64
-+ *    0   |   1   |   0   |   1   |   0   |  256 KB       | Lower 1/32
-+ *    0   |   1   |   0   |   1   |   1   |  512 KB       | Lower 1/16
-+ *    0   |   1   |   1   |   0   |   0   |  1 MB         | Lower 1/8
-+ *    0   |   1   |   1   |   0   |   1   |  2 MB         | Lower 1/4
-+ *    0   |   1   |   1   |   1   |   0   |  4 MB         | Lower 1/2
-  *
-  * Returns negative on errors, 0 on success.
-  */
- static int stm_lock(struct spi_nor *nor, loff_t ofs, uint64_t len)
- {
- 	struct mtd_info *mtd = &nor->mtd;
--	u8 status_old, status_new;
-+	int status_old, status_new;
- 	u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
- 	u8 shift = ffs(mask) - 1, pow, val;
-+	loff_t lock_len;
-+	bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
-+	bool use_top;
-+	int ret;
- 
- 	status_old = read_sr(nor);
-+	if (status_old < 0)
-+		return status_old;
- 
--	/* SPI NOR always locks to the end */
--	if (ofs + len != mtd->size) {
--		/* Does combined region extend to end? */
--		if (!stm_is_locked_sr(nor, ofs + len, mtd->size - ofs - len,
--				      status_old))
--			return -EINVAL;
--		len = mtd->size - ofs;
--	}
-+	/* If nothing in our range is unlocked, we don't need to do anything */
-+	if (stm_is_locked_sr(nor, ofs, len, status_old))
-+		return 0;
-+
-+	/* If anything below us is unlocked, we can't use 'bottom' protection */
-+	if (!stm_is_locked_sr(nor, 0, ofs, status_old))
-+		can_be_bottom = false;
-+
-+	/* If anything above us is unlocked, we can't use 'top' protection */
-+	if (!stm_is_locked_sr(nor, ofs + len, mtd->size - (ofs + len),
-+				status_old))
-+		can_be_top = false;
-+
-+	if (!can_be_bottom && !can_be_top)
-+		return -EINVAL;
-+
-+	/* Prefer top, if both are valid */
-+	use_top = can_be_top;
-+
-+	/* lock_len: length of region that should end up locked */
-+	if (use_top)
-+		lock_len = mtd->size - ofs;
-+	else
-+		lock_len = ofs + len;
- 
- 	/*
- 	 * Need smallest pow such that:
-@@ -484,7 +563,7 @@ static int stm_lock(struct spi_nor *nor,
- 	 *
- 	 *   pow = ceil(log2(size / len)) = log2(size) - floor(log2(len))
- 	 */
--	pow = ilog2(mtd->size) - ilog2(len);
-+	pow = ilog2(mtd->size) - ilog2(lock_len);
- 	val = mask - (pow << shift);
- 	if (val & ~mask)
- 		return -EINVAL;
-@@ -492,14 +571,27 @@ static int stm_lock(struct spi_nor *nor,
- 	if (!(val & mask))
- 		return -EINVAL;
- 
--	status_new = (status_old & ~mask) | val;
-+	status_new = (status_old & ~mask & ~SR_TB) | val;
-+
-+	/* Disallow further writes if WP pin is asserted */
-+	status_new |= SR_SRWD;
-+
-+	if (!use_top)
-+		status_new |= SR_TB;
-+
-+	/* Don't bother if they're the same */
-+	if (status_new == status_old)
-+		return 0;
- 
- 	/* Only modify protection if it will not unlock other areas */
--	if ((status_new & mask) <= (status_old & mask))
-+	if ((status_new & mask) < (status_old & mask))
- 		return -EINVAL;
- 
- 	write_enable(nor);
--	return write_sr(nor, status_new);
-+	ret = write_sr(nor, status_new);
-+	if (ret)
-+		return ret;
-+	return spi_nor_wait_till_ready(nor);
- }
- 
- /*
-@@ -510,17 +602,43 @@ static int stm_lock(struct spi_nor *nor,
- static int stm_unlock(struct spi_nor *nor, loff_t ofs, uint64_t len)
- {
- 	struct mtd_info *mtd = &nor->mtd;
--	uint8_t status_old, status_new;
-+	int status_old, status_new;
- 	u8 mask = SR_BP2 | SR_BP1 | SR_BP0;
- 	u8 shift = ffs(mask) - 1, pow, val;
-+	loff_t lock_len;
-+	bool can_be_top = true, can_be_bottom = nor->flags & SNOR_F_HAS_SR_TB;
-+	bool use_top;
-+	int ret;
- 
- 	status_old = read_sr(nor);
-+	if (status_old < 0)
-+		return status_old;
-+
-+	/* If nothing in our range is locked, we don't need to do anything */
-+	if (stm_is_unlocked_sr(nor, ofs, len, status_old))
-+		return 0;
-+
-+	/* If anything below us is locked, we can't use 'top' protection */
-+	if (!stm_is_unlocked_sr(nor, 0, ofs, status_old))
-+		can_be_top = false;
-+
-+	/* If anything above us is locked, we can't use 'bottom' protection */
-+	if (!stm_is_unlocked_sr(nor, ofs + len, mtd->size - (ofs + len),
-+				status_old))
-+		can_be_bottom = false;
- 
--	/* Cannot unlock; would unlock larger region than requested */
--	if (stm_is_locked_sr(nor, ofs - mtd->erasesize, mtd->erasesize,
--			     status_old))
-+	if (!can_be_bottom && !can_be_top)
- 		return -EINVAL;
- 
-+	/* Prefer top, if both are valid */
-+	use_top = can_be_top;
-+
-+	/* lock_len: length of region that should remain locked */
-+	if (use_top)
-+		lock_len = mtd->size - (ofs + len);
-+	else
-+		lock_len = ofs;
-+
- 	/*
- 	 * Need largest pow such that:
- 	 *
-@@ -530,8 +648,8 @@ static int stm_unlock(struct spi_nor *no
- 	 *
- 	 *   pow = floor(log2(size / len)) = log2(size) - ceil(log2(len))
- 	 */
--	pow = ilog2(mtd->size) - order_base_2(mtd->size - (ofs + len));
--	if (ofs + len == mtd->size) {
-+	pow = ilog2(mtd->size) - order_base_2(lock_len);
-+	if (lock_len == 0) {
- 		val = 0; /* fully unlocked */
- 	} else {
- 		val = mask - (pow << shift);
-@@ -540,14 +658,28 @@ static int stm_unlock(struct spi_nor *no
- 			return -EINVAL;
- 	}
- 
--	status_new = (status_old & ~mask) | val;
-+	status_new = (status_old & ~mask & ~SR_TB) | val;
-+
-+	/* Don't protect status register if we're fully unlocked */
-+	if (lock_len == mtd->size)
-+		status_new &= ~SR_SRWD;
-+
-+	if (!use_top)
-+		status_new |= SR_TB;
-+
-+	/* Don't bother if they're the same */
-+	if (status_new == status_old)
-+		return 0;
- 
- 	/* Only modify protection if it will not lock other areas */
--	if ((status_new & mask) >= (status_old & mask))
-+	if ((status_new & mask) > (status_old & mask))
- 		return -EINVAL;
- 
- 	write_enable(nor);
--	return write_sr(nor, status_new);
-+	ret = write_sr(nor, status_new);
-+	if (ret)
-+		return ret;
-+	return spi_nor_wait_till_ready(nor);
- }
- 
- /*
-@@ -737,8 +869,8 @@ static const struct flash_info spi_nor_i
- 	{ "n25q032a",	 INFO(0x20bb16, 0, 64 * 1024,   64, SPI_NOR_QUAD_READ) },
- 	{ "n25q064",     INFO(0x20ba17, 0, 64 * 1024,  128, SECT_4K | SPI_NOR_QUAD_READ) },
- 	{ "n25q064a",    INFO(0x20bb17, 0, 64 * 1024,  128, SECT_4K | SPI_NOR_QUAD_READ) },
--	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, SPI_NOR_QUAD_READ) },
--	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, SPI_NOR_QUAD_READ) },
-+	{ "n25q128a11",  INFO(0x20bb18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ) },
-+	{ "n25q128a13",  INFO(0x20ba18, 0, 64 * 1024,  256, SECT_4K | SPI_NOR_QUAD_READ) },
- 	{ "n25q256a",    INFO(0x20ba19, 0, 64 * 1024,  512, SECT_4K | SPI_NOR_QUAD_READ) },
- 	{ "n25q512a",    INFO(0x20bb20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
- 	{ "n25q512ax3",  INFO(0x20ba20, 0, 64 * 1024, 1024, SECT_4K | USE_FSR | SPI_NOR_QUAD_READ) },
-@@ -772,6 +904,7 @@ static const struct flash_info spi_nor_i
- 	{ "s25fl008k",  INFO(0xef4014,      0,  64 * 1024,  16, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- 	{ "s25fl016k",  INFO(0xef4015,      0,  64 * 1024,  32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- 	{ "s25fl064k",  INFO(0xef4017,      0,  64 * 1024, 128, SECT_4K) },
-+	{ "s25fl116k",  INFO(0x014015,      0,  64 * 1024,  32, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
- 	{ "s25fl132k",  INFO(0x014016,      0,  64 * 1024,  64, SECT_4K) },
- 	{ "s25fl164k",  INFO(0x014017,      0,  64 * 1024, 128, SECT_4K) },
- 	{ "s25fl204k",  INFO(0x014013,      0,  64 * 1024,   8, SECT_4K | SPI_NOR_DUAL_READ) },
-@@ -835,11 +968,23 @@ static const struct flash_info spi_nor_i
- 	{ "w25x16", INFO(0xef3015, 0, 64 * 1024,  32, SECT_4K) },
- 	{ "w25x32", INFO(0xef3016, 0, 64 * 1024,  64, SECT_4K) },
- 	{ "w25q32", INFO(0xef4016, 0, 64 * 1024,  64, SECT_4K) },
--	{ "w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+	{
-+		"w25q32dw", INFO(0xef6016, 0, 64 * 1024,  64,
-+			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-+			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-+	},
- 	{ "w25x64", INFO(0xef3017, 0, 64 * 1024, 128, SECT_4K) },
- 	{ "w25q64", INFO(0xef4017, 0, 64 * 1024, 128, SECT_4K) },
--	{ "w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
--	{ "w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256, SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
-+	{
-+		"w25q64dw", INFO(0xef6017, 0, 64 * 1024, 128,
-+			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-+			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-+	},
-+	{
-+		"w25q128fw", INFO(0xef6018, 0, 64 * 1024, 256,
-+			SECT_4K | SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ |
-+			SPI_NOR_HAS_LOCK | SPI_NOR_HAS_TB)
-+	},
- 	{ "w25q80", INFO(0xef5014, 0, 64 * 1024,  16, SECT_4K) },
- 	{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024,  16, SECT_4K) },
- 	{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
-@@ -862,7 +1007,7 @@ static const struct flash_info *spi_nor_
- 
- 	tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
- 	if (tmp < 0) {
--		dev_dbg(nor->dev, " error %d reading JEDEC ID\n", tmp);
-+		dev_dbg(nor->dev, "error %d reading JEDEC ID\n", tmp);
- 		return ERR_PTR(tmp);
- 	}
- 
-@@ -873,7 +1018,7 @@ static const struct flash_info *spi_nor_
- 				return &spi_nor_ids[tmp];
- 		}
- 	}
--	dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %2x, %2x\n",
-+	dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
- 		id[0], id[1], id[2]);
- 	return ERR_PTR(-ENODEV);
- }
-@@ -1019,6 +1164,8 @@ static int macronix_quad_enable(struct s
- 	int ret, val;
- 
- 	val = read_sr(nor);
-+	if (val < 0)
-+		return val;
- 	write_enable(nor);
- 
- 	write_sr(nor, val | SR_QUAD_EN_MX);
-@@ -1107,7 +1254,7 @@ static int set_quad_mode(struct spi_nor
- static int spi_nor_check(struct spi_nor *nor)
- {
- 	if (!nor->dev || !nor->read || !nor->write ||
--		!nor->read_reg || !nor->write_reg || !nor->erase) {
-+		!nor->read_reg || !nor->write_reg) {
- 		pr_err("spi-nor: please fill all the necessary fields!\n");
- 		return -EINVAL;
- 	}
-@@ -1120,7 +1267,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	const struct flash_info *info = NULL;
- 	struct device *dev = nor->dev;
- 	struct mtd_info *mtd = &nor->mtd;
--	struct device_node *np = nor->flash_node;
-+	struct device_node *np = spi_nor_get_flash_node(nor);
- 	int ret;
- 	int i;
- 
-@@ -1174,6 +1321,7 @@ int spi_nor_scan(struct spi_nor *nor, co
- 	    info->flags & SPI_NOR_HAS_LOCK) {
- 		write_enable(nor);
- 		write_sr(nor, 0);
-+		spi_nor_wait_till_ready(nor);
- 	}
- 
- 	if (!mtd->name)
-@@ -1208,6 +1356,8 @@ int spi_nor_scan(struct spi_nor *nor, co
- 
- 	if (info->flags & USE_FSR)
- 		nor->flags |= SNOR_F_USE_FSR;
-+	if (info->flags & SPI_NOR_HAS_TB)
-+		nor->flags |= SNOR_F_HAS_SR_TB;
- 
- #ifdef CONFIG_MTD_SPI_NOR_USE_4K_SECTORS
- 	/* prefer "small sector" erase if possible */
-@@ -1310,6 +1460,12 @@ int spi_nor_scan(struct spi_nor *nor, co
- 		nor->addr_width = 3;
- 	}
- 
-+	if (nor->addr_width > SPI_NOR_MAX_ADDR_WIDTH) {
-+		dev_err(dev, "address width is too large: %u\n",
-+			nor->addr_width);
-+		return -EINVAL;
-+	}
-+
- 	nor->read_dummy = spi_nor_read_dummy_cycles(nor);
- 
- 	dev_info(dev, "%s (%lld Kbytes)\n", info->name,
---- a/drivers/mtd/tests/mtd_nandecctest.c
-+++ b/drivers/mtd/tests/mtd_nandecctest.c
-@@ -187,7 +187,7 @@ static int double_bit_error_detect(void
- 	__nand_calculate_ecc(error_data, size, calc_ecc);
- 	ret = __nand_correct_data(error_data, error_ecc, calc_ecc, size);
- 
--	return (ret == -1) ? 0 : -EINVAL;
-+	return (ret == -EBADMSG) ? 0 : -EINVAL;
- }
- 
- static const struct nand_ecc_test nand_ecc_test[] = {
---- a/drivers/mtd/tests/oobtest.c
-+++ b/drivers/mtd/tests/oobtest.c
-@@ -215,19 +215,19 @@ static int verify_eraseblock(int ebnum)
- 			pr_info("ignoring error as within bitflip_limit\n");
- 		}
- 
--		if (use_offset != 0 || use_len < mtd->ecclayout->oobavail) {
-+		if (use_offset != 0 || use_len < mtd->oobavail) {
- 			int k;
- 
- 			ops.mode      = MTD_OPS_AUTO_OOB;
- 			ops.len       = 0;
- 			ops.retlen    = 0;
--			ops.ooblen    = mtd->ecclayout->oobavail;
-+			ops.ooblen    = mtd->oobavail;
- 			ops.oobretlen = 0;
- 			ops.ooboffs   = 0;
- 			ops.datbuf    = NULL;
- 			ops.oobbuf    = readbuf;
- 			err = mtd_read_oob(mtd, addr, &ops);
--			if (err || ops.oobretlen != mtd->ecclayout->oobavail) {
-+			if (err || ops.oobretlen != mtd->oobavail) {
- 				pr_err("error: readoob failed at %#llx\n",
- 						(long long)addr);
- 				errcnt += 1;
-@@ -244,7 +244,7 @@ static int verify_eraseblock(int ebnum)
- 			/* verify post-(use_offset + use_len) area for 0xff */
- 			k = use_offset + use_len;
- 			bitflips += memffshow(addr, k, readbuf + k,
--					      mtd->ecclayout->oobavail - k);
-+					      mtd->oobavail - k);
- 
- 			if (bitflips > bitflip_limit) {
- 				pr_err("error: verify failed at %#llx\n",
-@@ -269,8 +269,8 @@ static int verify_eraseblock_in_one_go(i
- 	struct mtd_oob_ops ops;
- 	int err = 0;
- 	loff_t addr = (loff_t)ebnum * mtd->erasesize;
--	size_t len = mtd->ecclayout->oobavail * pgcnt;
--	size_t oobavail = mtd->ecclayout->oobavail;
-+	size_t len = mtd->oobavail * pgcnt;
-+	size_t oobavail = mtd->oobavail;
- 	size_t bitflips;
- 	int i;
- 
-@@ -394,8 +394,8 @@ static int __init mtd_oobtest_init(void)
- 		goto out;
- 
- 	use_offset = 0;
--	use_len = mtd->ecclayout->oobavail;
--	use_len_max = mtd->ecclayout->oobavail;
-+	use_len = mtd->oobavail;
-+	use_len_max = mtd->oobavail;
- 	vary_offset = 0;
- 
- 	/* First test: write all OOB, read it back and verify */
-@@ -460,8 +460,8 @@ static int __init mtd_oobtest_init(void)
- 
- 	/* Write all eraseblocks */
- 	use_offset = 0;
--	use_len = mtd->ecclayout->oobavail;
--	use_len_max = mtd->ecclayout->oobavail;
-+	use_len = mtd->oobavail;
-+	use_len_max = mtd->oobavail;
- 	vary_offset = 1;
- 	prandom_seed_state(&rnd_state, 5);
- 
-@@ -471,8 +471,8 @@ static int __init mtd_oobtest_init(void)
- 
- 	/* Check all eraseblocks */
- 	use_offset = 0;
--	use_len = mtd->ecclayout->oobavail;
--	use_len_max = mtd->ecclayout->oobavail;
-+	use_len = mtd->oobavail;
-+	use_len_max = mtd->oobavail;
- 	vary_offset = 1;
- 	prandom_seed_state(&rnd_state, 5);
- 	err = verify_all_eraseblocks();
-@@ -480,8 +480,8 @@ static int __init mtd_oobtest_init(void)
- 		goto out;
- 
- 	use_offset = 0;
--	use_len = mtd->ecclayout->oobavail;
--	use_len_max = mtd->ecclayout->oobavail;
-+	use_len = mtd->oobavail;
-+	use_len_max = mtd->oobavail;
- 	vary_offset = 0;
- 
- 	/* Fourth test: try to write off end of device */
-@@ -501,7 +501,7 @@ static int __init mtd_oobtest_init(void)
- 	ops.retlen    = 0;
- 	ops.ooblen    = 1;
- 	ops.oobretlen = 0;
--	ops.ooboffs   = mtd->ecclayout->oobavail;
-+	ops.ooboffs   = mtd->oobavail;
- 	ops.datbuf    = NULL;
- 	ops.oobbuf    = writebuf;
- 	pr_info("attempting to start write past end of OOB\n");
-@@ -521,7 +521,7 @@ static int __init mtd_oobtest_init(void)
- 	ops.retlen    = 0;
- 	ops.ooblen    = 1;
- 	ops.oobretlen = 0;
--	ops.ooboffs   = mtd->ecclayout->oobavail;
-+	ops.ooboffs   = mtd->oobavail;
- 	ops.datbuf    = NULL;
- 	ops.oobbuf    = readbuf;
- 	pr_info("attempting to start read past end of OOB\n");
-@@ -543,7 +543,7 @@ static int __init mtd_oobtest_init(void)
- 		ops.mode      = MTD_OPS_AUTO_OOB;
- 		ops.len       = 0;
- 		ops.retlen    = 0;
--		ops.ooblen    = mtd->ecclayout->oobavail + 1;
-+		ops.ooblen    = mtd->oobavail + 1;
- 		ops.oobretlen = 0;
- 		ops.ooboffs   = 0;
- 		ops.datbuf    = NULL;
-@@ -563,7 +563,7 @@ static int __init mtd_oobtest_init(void)
- 		ops.mode      = MTD_OPS_AUTO_OOB;
- 		ops.len       = 0;
- 		ops.retlen    = 0;
--		ops.ooblen    = mtd->ecclayout->oobavail + 1;
-+		ops.ooblen    = mtd->oobavail + 1;
- 		ops.oobretlen = 0;
- 		ops.ooboffs   = 0;
- 		ops.datbuf    = NULL;
-@@ -587,7 +587,7 @@ static int __init mtd_oobtest_init(void)
- 		ops.mode      = MTD_OPS_AUTO_OOB;
- 		ops.len       = 0;
- 		ops.retlen    = 0;
--		ops.ooblen    = mtd->ecclayout->oobavail;
-+		ops.ooblen    = mtd->oobavail;
- 		ops.oobretlen = 0;
- 		ops.ooboffs   = 1;
- 		ops.datbuf    = NULL;
-@@ -607,7 +607,7 @@ static int __init mtd_oobtest_init(void)
- 		ops.mode      = MTD_OPS_AUTO_OOB;
- 		ops.len       = 0;
- 		ops.retlen    = 0;
--		ops.ooblen    = mtd->ecclayout->oobavail;
-+		ops.ooblen    = mtd->oobavail;
- 		ops.oobretlen = 0;
- 		ops.ooboffs   = 1;
- 		ops.datbuf    = NULL;
-@@ -638,7 +638,7 @@ static int __init mtd_oobtest_init(void)
- 	for (i = 0; i < ebcnt - 1; ++i) {
- 		int cnt = 2;
- 		int pg;
--		size_t sz = mtd->ecclayout->oobavail;
-+		size_t sz = mtd->oobavail;
- 		if (bbt[i] || bbt[i + 1])
- 			continue;
- 		addr = (loff_t)(i + 1) * mtd->erasesize - mtd->writesize;
-@@ -673,13 +673,12 @@ static int __init mtd_oobtest_init(void)
- 	for (i = 0; i < ebcnt - 1; ++i) {
- 		if (bbt[i] || bbt[i + 1])
- 			continue;
--		prandom_bytes_state(&rnd_state, writebuf,
--					mtd->ecclayout->oobavail * 2);
-+		prandom_bytes_state(&rnd_state, writebuf, mtd->oobavail * 2);
- 		addr = (loff_t)(i + 1) * mtd->erasesize - mtd->writesize;
- 		ops.mode      = MTD_OPS_AUTO_OOB;
- 		ops.len       = 0;
- 		ops.retlen    = 0;
--		ops.ooblen    = mtd->ecclayout->oobavail * 2;
-+		ops.ooblen    = mtd->oobavail * 2;
- 		ops.oobretlen = 0;
- 		ops.ooboffs   = 0;
- 		ops.datbuf    = NULL;
-@@ -688,7 +687,7 @@ static int __init mtd_oobtest_init(void)
- 		if (err)
- 			goto out;
- 		if (memcmpshow(addr, readbuf, writebuf,
--			       mtd->ecclayout->oobavail * 2)) {
-+			       mtd->oobavail * 2)) {
- 			pr_err("error: verify failed at %#llx\n",
- 			       (long long)addr);
- 			errcnt += 1;
---- a/drivers/mtd/tests/pagetest.c
-+++ b/drivers/mtd/tests/pagetest.c
-@@ -127,13 +127,12 @@ static int crosstest(void)
- 	unsigned char *pp1, *pp2, *pp3, *pp4;
- 
- 	pr_info("crosstest\n");
--	pp1 = kmalloc(pgsize * 4, GFP_KERNEL);
-+	pp1 = kzalloc(pgsize * 4, GFP_KERNEL);
- 	if (!pp1)
- 		return -ENOMEM;
- 	pp2 = pp1 + pgsize;
- 	pp3 = pp2 + pgsize;
- 	pp4 = pp3 + pgsize;
--	memset(pp1, 0, pgsize * 4);
- 
- 	addr0 = 0;
- 	for (i = 0; i < ebcnt && bbt[i]; ++i)
---- a/include/linux/mtd/bbm.h
-+++ b/include/linux/mtd/bbm.h
-@@ -166,7 +166,6 @@ struct bbm_info {
- };
- 
- /* OneNAND BBT interface */
--extern int onenand_scan_bbt(struct mtd_info *mtd, struct nand_bbt_descr *bd);
- extern int onenand_default_bbt(struct mtd_info *mtd);
- 
- #endif	/* __LINUX_MTD_BBM_H */
---- a/include/linux/mtd/fsmc.h
-+++ b/include/linux/mtd/fsmc.h
-@@ -103,24 +103,6 @@
- 
- #define FSMC_BUSY_WAIT_TIMEOUT	(1 * HZ)
- 
--/*
-- * There are 13 bytes of ecc for every 512 byte block in FSMC version 8
-- * and it has to be read consecutively and immediately after the 512
-- * byte data block for hardware to generate the error bit offsets
-- * Managing the ecc bytes in the following way is easier. This way is
-- * similar to oobfree structure maintained already in u-boot nand driver
-- */
--#define MAX_ECCPLACE_ENTRIES	32
--
--struct fsmc_nand_eccplace {
--	uint8_t offset;
--	uint8_t length;
--};
--
--struct fsmc_eccplace {
--	struct fsmc_nand_eccplace eccplace[MAX_ECCPLACE_ENTRIES];
--};
--
- struct fsmc_nand_timings {
- 	uint8_t tclr;
- 	uint8_t tar;
---- a/include/linux/mtd/inftl.h
-+++ b/include/linux/mtd/inftl.h
-@@ -44,7 +44,6 @@ struct INFTLrecord {
- 	unsigned int nb_blocks;		/* number of physical blocks */
- 	unsigned int nb_boot_blocks;	/* number of blocks used by the bios */
- 	struct erase_info instr;
--	struct nand_ecclayout oobinfo;
- };
- 
- int INFTL_mount(struct INFTLrecord *s);
---- a/include/linux/mtd/map.h
-+++ b/include/linux/mtd/map.h
-@@ -137,7 +137,9 @@
- #endif
- 
- #ifndef map_bankwidth
-+#ifdef CONFIG_MTD
- #warning "No CONFIG_MTD_MAP_BANK_WIDTH_xx selected. No NOR chip support can work"
-+#endif
- static inline int map_bankwidth(void *map)
- {
- 	BUG();
-@@ -233,8 +235,11 @@ struct map_info {
- 	   If there is no cache to care about this can be set to NULL. */
- 	void (*inval_cache)(struct map_info *, unsigned long, ssize_t);
- 
--	/* set_vpp() must handle being reentered -- enable, enable, disable
--	   must leave it enabled. */
-+	/* This will be called with 1 as parameter when the first map user
-+	 * needs VPP, and called with 0 when the last user exits. The map
-+	 * core maintains a reference counter, and assumes that VPP is a
-+	 * global resource applying to all mapped flash chips on the system.
-+	 */
- 	void (*set_vpp)(struct map_info *, int);
- 
- 	unsigned long pfow_base;
---- a/include/linux/mtd/mtd.h
-+++ b/include/linux/mtd/mtd.h
-@@ -100,17 +100,35 @@ struct mtd_oob_ops {
- 
- #define MTD_MAX_OOBFREE_ENTRIES_LARGE	32
- #define MTD_MAX_ECCPOS_ENTRIES_LARGE	640
-+/**
-+ * struct mtd_oob_region - oob region definition
-+ * @offset: region offset
-+ * @length: region length
-+ *
-+ * This structure describes a region of the OOB area, and is used
-+ * to retrieve ECC or free bytes sections.
-+ * Each section is defined by an offset within the OOB area and a
-+ * length.
-+ */
-+struct mtd_oob_region {
-+	u32 offset;
-+	u32 length;
-+};
-+
- /*
-- * Internal ECC layout control structure. For historical reasons, there is a
-- * similar, smaller struct nand_ecclayout_user (in mtd-abi.h) that is retained
-- * for export to user-space via the ECCGETLAYOUT ioctl.
-- * nand_ecclayout should be expandable in the future simply by the above macros.
-+ * struct mtd_ooblayout_ops - NAND OOB layout operations
-+ * @ecc: function returning an ECC region in the OOB area.
-+ *	 Should return -ERANGE if %section exceeds the total number of
-+ *	 ECC sections.
-+ * @free: function returning a free region in the OOB area.
-+ *	  Should return -ERANGE if %section exceeds the total number of
-+ *	  free sections.
-  */
--struct nand_ecclayout {
--	__u32 eccbytes;
--	__u32 eccpos[MTD_MAX_ECCPOS_ENTRIES_LARGE];
--	__u32 oobavail;
--	struct nand_oobfree oobfree[MTD_MAX_OOBFREE_ENTRIES_LARGE];
-+struct mtd_ooblayout_ops {
-+	int (*ecc)(struct mtd_info *mtd, int section,
-+		   struct mtd_oob_region *oobecc);
-+	int (*free)(struct mtd_info *mtd, int section,
-+		    struct mtd_oob_region *oobfree);
- };
- 
- struct module;	/* only needed for owner field in mtd_info */
-@@ -171,8 +189,8 @@ struct mtd_info {
- 	const char *name;
- 	int index;
- 
--	/* ECC layout structure pointer - read only! */
--	struct nand_ecclayout *ecclayout;
-+	/* OOB layout description */
-+	const struct mtd_ooblayout_ops *ooblayout;
- 
- 	/* the ecc step size. */
- 	unsigned int ecc_step_size;
-@@ -258,6 +276,46 @@ struct mtd_info {
- 	int usecount;
- };
- 
-+int mtd_ooblayout_ecc(struct mtd_info *mtd, int section,
-+		      struct mtd_oob_region *oobecc);
-+int mtd_ooblayout_find_eccregion(struct mtd_info *mtd, int eccbyte,
-+				 int *section,
-+				 struct mtd_oob_region *oobregion);
-+int mtd_ooblayout_get_eccbytes(struct mtd_info *mtd, u8 *eccbuf,
-+			       const u8 *oobbuf, int start, int nbytes);
-+int mtd_ooblayout_set_eccbytes(struct mtd_info *mtd, const u8 *eccbuf,
-+			       u8 *oobbuf, int start, int nbytes);
-+int mtd_ooblayout_free(struct mtd_info *mtd, int section,
-+		       struct mtd_oob_region *oobfree);
-+int mtd_ooblayout_get_databytes(struct mtd_info *mtd, u8 *databuf,
-+				const u8 *oobbuf, int start, int nbytes);
-+int mtd_ooblayout_set_databytes(struct mtd_info *mtd, const u8 *databuf,
-+				u8 *oobbuf, int start, int nbytes);
-+int mtd_ooblayout_count_freebytes(struct mtd_info *mtd);
-+int mtd_ooblayout_count_eccbytes(struct mtd_info *mtd);
-+
-+static inline void mtd_set_ooblayout(struct mtd_info *mtd,
-+				     const struct mtd_ooblayout_ops *ooblayout)
-+{
-+	mtd->ooblayout = ooblayout;
-+}
-+
-+static inline void mtd_set_of_node(struct mtd_info *mtd,
-+				   struct device_node *np)
-+{
-+	mtd->dev.of_node = np;
-+}
-+
-+static inline struct device_node *mtd_get_of_node(struct mtd_info *mtd)
-+{
-+	return mtd->dev.of_node;
-+}
-+
-+static inline int mtd_oobavail(struct mtd_info *mtd, struct mtd_oob_ops *ops)
-+{
-+	return ops->mode == MTD_OPS_AUTO_OOB ? mtd->oobavail : mtd->oobsize;
-+}
-+
- int mtd_erase(struct mtd_info *mtd, struct erase_info *instr);
- int mtd_point(struct mtd_info *mtd, loff_t from, size_t len, size_t *retlen,
- 	      void **virt, resource_size_t *phys);
---- a/include/linux/mtd/nand.h
-+++ b/include/linux/mtd/nand.h
-@@ -119,6 +119,12 @@ typedef enum {
- 	NAND_ECC_SOFT_BCH,
- } nand_ecc_modes_t;
- 
-+enum nand_ecc_algo {
-+	NAND_ECC_UNKNOWN,
-+	NAND_ECC_HAMMING,
-+	NAND_ECC_BCH,
-+};
-+
- /*
-  * Constants for Hardware ECC
-  */
-@@ -129,6 +135,14 @@ typedef enum {
- /* Enable Hardware ECC before syndrome is read back from flash */
- #define NAND_ECC_READSYN	2
- 
-+/*
-+ * Enable generic NAND 'page erased' check. This check is only done when
-+ * ecc.correct() returns -EBADMSG.
-+ * Set this flag if your implementation does not fix bitflips in erased
-+ * pages and you want to rely on the default implementation.
-+ */
-+#define NAND_ECC_GENERIC_ERASED_CHECK	BIT(0)
-+
- /* Bit mask for flags passed to do_nand_read_ecc */
- #define NAND_GET_DEVICE		0x80
- 
-@@ -160,6 +174,12 @@ typedef enum {
- /* Device supports subpage reads */
- #define NAND_SUBPAGE_READ	0x00001000
- 
-+/*
-+ * Some MLC NANDs need data scrambling to limit bitflips caused by repeated
-+ * patterns.
-+ */
-+#define NAND_NEED_SCRAMBLING	0x00002000
-+
- /* Options valid for Samsung large page devices */
- #define NAND_SAMSUNG_LP_OPTIONS NAND_CACHEPRG
- 
-@@ -276,15 +296,15 @@ struct nand_onfi_params {
- 	__le16 t_r;
- 	__le16 t_ccs;
- 	__le16 src_sync_timing_mode;
--	__le16 src_ssync_features;
-+	u8 src_ssync_features;
- 	__le16 clk_pin_capacitance_typ;
- 	__le16 io_pin_capacitance_typ;
- 	__le16 input_pin_capacitance_typ;
- 	u8 input_pin_capacitance_max;
- 	u8 driver_strength_support;
- 	__le16 t_int_r;
--	__le16 t_ald;
--	u8 reserved4[7];
-+	__le16 t_adl;
-+	u8 reserved4[8];
- 
- 	/* vendor */
- 	__le16 vendor_revision;
-@@ -407,7 +427,7 @@ struct nand_jedec_params {
- 	__le16 input_pin_capacitance_typ;
- 	__le16 clk_pin_capacitance_typ;
- 	u8 driver_strength_support;
--	__le16 t_ald;
-+	__le16 t_adl;
- 	u8 reserved4[36];
- 
- 	/* ECC and endurance block */
-@@ -444,6 +464,7 @@ struct nand_hw_control {
- /**
-  * struct nand_ecc_ctrl - Control structure for ECC
-  * @mode:	ECC mode
-+ * @algo:	ECC algorithm
-  * @steps:	number of ECC steps per page
-  * @size:	data bytes per ECC step
-  * @bytes:	ECC bytes per step
-@@ -451,12 +472,18 @@ struct nand_hw_control {
-  * @total:	total number of ECC bytes per page
-  * @prepad:	padding information for syndrome based ECC generators
-  * @postpad:	padding information for syndrome based ECC generators
-- * @layout:	ECC layout control struct pointer
-+ * @options:	ECC specific options (see NAND_ECC_XXX flags defined above)
-  * @priv:	pointer to private ECC control data
-  * @hwctl:	function to control hardware ECC generator. Must only
-  *		be provided if an hardware ECC is available
-  * @calculate:	function for ECC calculation or readback from ECC hardware
-- * @correct:	function for ECC correction, matching to ECC generator (sw/hw)
-+ * @correct:	function for ECC correction, matching to ECC generator (sw/hw).
-+ *		Should return a positive number representing the number of
-+ *		corrected bitflips, -EBADMSG if the number of bitflips exceed
-+ *		ECC strength, or any other error code if the error is not
-+ *		directly related to correction.
-+ *		If -EBADMSG is returned the input buffers should be left
-+ *		untouched.
-  * @read_page_raw:	function to read a raw page without ECC. This function
-  *			should hide the specific layout used by the ECC
-  *			controller and always return contiguous in-band and
-@@ -487,6 +514,7 @@ struct nand_hw_control {
-  */
- struct nand_ecc_ctrl {
- 	nand_ecc_modes_t mode;
-+	enum nand_ecc_algo algo;
- 	int steps;
- 	int size;
- 	int bytes;
-@@ -494,7 +522,7 @@ struct nand_ecc_ctrl {
- 	int strength;
- 	int prepad;
- 	int postpad;
--	struct nand_ecclayout	*layout;
-+	unsigned int options;
- 	void *priv;
- 	void (*hwctl)(struct mtd_info *mtd, int mode);
- 	int (*calculate)(struct mtd_info *mtd, const uint8_t *dat,
-@@ -540,11 +568,11 @@ struct nand_buffers {
- 
- /**
-  * struct nand_chip - NAND Private Flash Chip Data
-+ * @mtd:		MTD device registered to the MTD framework
-  * @IO_ADDR_R:		[BOARDSPECIFIC] address to read the 8 I/O lines of the
-  *			flash device
-  * @IO_ADDR_W:		[BOARDSPECIFIC] address to write the 8 I/O lines of the
-  *			flash device.
-- * @flash_node:		[BOARDSPECIFIC] device node describing this instance
-  * @read_byte:		[REPLACEABLE] read one byte from the chip
-  * @read_word:		[REPLACEABLE] read one word from the chip
-  * @write_byte:		[REPLACEABLE] write a single byte to the chip on the
-@@ -640,18 +668,17 @@ struct nand_buffers {
-  */
- 
- struct nand_chip {
-+	struct mtd_info mtd;
- 	void __iomem *IO_ADDR_R;
- 	void __iomem *IO_ADDR_W;
- 
--	struct device_node *flash_node;
--
- 	uint8_t (*read_byte)(struct mtd_info *mtd);
- 	u16 (*read_word)(struct mtd_info *mtd);
- 	void (*write_byte)(struct mtd_info *mtd, uint8_t byte);
- 	void (*write_buf)(struct mtd_info *mtd, const uint8_t *buf, int len);
- 	void (*read_buf)(struct mtd_info *mtd, uint8_t *buf, int len);
- 	void (*select_chip)(struct mtd_info *mtd, int chip);
--	int (*block_bad)(struct mtd_info *mtd, loff_t ofs, int getchip);
-+	int (*block_bad)(struct mtd_info *mtd, loff_t ofs);
- 	int (*block_markbad)(struct mtd_info *mtd, loff_t ofs);
- 	void (*cmd_ctrl)(struct mtd_info *mtd, int dat, unsigned int ctrl);
- 	int (*dev_ready)(struct mtd_info *mtd);
-@@ -719,6 +746,40 @@ struct nand_chip {
- 	void *priv;
- };
- 
-+extern const struct mtd_ooblayout_ops nand_ooblayout_sp_ops;
-+extern const struct mtd_ooblayout_ops nand_ooblayout_lp_ops;
-+
-+static inline void nand_set_flash_node(struct nand_chip *chip,
-+				       struct device_node *np)
-+{
-+	mtd_set_of_node(&chip->mtd, np);
-+}
-+
-+static inline struct device_node *nand_get_flash_node(struct nand_chip *chip)
-+{
-+	return mtd_get_of_node(&chip->mtd);
-+}
-+
-+static inline struct nand_chip *mtd_to_nand(struct mtd_info *mtd)
-+{
-+	return container_of(mtd, struct nand_chip, mtd);
-+}
-+
-+static inline struct mtd_info *nand_to_mtd(struct nand_chip *chip)
-+{
-+	return &chip->mtd;
-+}
-+
-+static inline void *nand_get_controller_data(struct nand_chip *chip)
-+{
-+	return chip->priv;
-+}
-+
-+static inline void nand_set_controller_data(struct nand_chip *chip, void *priv)
-+{
-+	chip->priv = priv;
-+}
-+
- /*
-  * NAND Flash Manufacturer ID Codes
-  */
-@@ -851,7 +912,6 @@ extern int nand_do_read(struct mtd_info
-  * @chip_delay:		R/B delay value in us
-  * @options:		Option flags, e.g. 16bit buswidth
-  * @bbt_options:	BBT option flags, e.g. NAND_BBT_USE_FLASH
-- * @ecclayout:		ECC layout info structure
-  * @part_probe_types:	NULL-terminated array of probe types
-  */
- struct platform_nand_chip {
-@@ -859,7 +919,6 @@ struct platform_nand_chip {
- 	int chip_offset;
- 	int nr_partitions;
- 	struct mtd_partition *partitions;
--	struct nand_ecclayout *ecclayout;
- 	int chip_delay;
- 	unsigned int options;
- 	unsigned int bbt_options;
-@@ -909,15 +968,6 @@ struct platform_nand_data {
- 	struct platform_nand_ctrl ctrl;
- };
- 
--/* Some helpers to access the data structures */
--static inline
--struct platform_nand_chip *get_platform_nandchip(struct mtd_info *mtd)
--{
--	struct nand_chip *chip = mtd->priv;
--
--	return chip->priv;
--}
--
- /* return the supported features. */
- static inline int onfi_feature(struct nand_chip *chip)
- {
---- a/include/linux/mtd/nand_bch.h
-+++ b/include/linux/mtd/nand_bch.h
-@@ -32,9 +32,7 @@ int nand_bch_correct_data(struct mtd_inf
- /*
-  * Initialize BCH encoder/decoder
-  */
--struct nand_bch_control *
--nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
--	      unsigned int eccbytes, struct nand_ecclayout **ecclayout);
-+struct nand_bch_control *nand_bch_init(struct mtd_info *mtd);
- /*
-  * Release BCH encoder/decoder resources
-  */
-@@ -55,12 +53,10 @@ static inline int
- nand_bch_correct_data(struct mtd_info *mtd, unsigned char *buf,
- 		      unsigned char *read_ecc, unsigned char *calc_ecc)
- {
--	return -1;
-+	return -ENOTSUPP;
- }
- 
--static inline struct nand_bch_control *
--nand_bch_init(struct mtd_info *mtd, unsigned int eccsize,
--	      unsigned int eccbytes, struct nand_ecclayout **ecclayout)
-+static inline struct nand_bch_control *nand_bch_init(struct mtd_info *mtd)
- {
- 	return NULL;
- }
---- a/include/linux/mtd/nftl.h
-+++ b/include/linux/mtd/nftl.h
-@@ -50,7 +50,6 @@ struct NFTLrecord {
-         unsigned int nb_blocks;		/* number of physical blocks */
-         unsigned int nb_boot_blocks;	/* number of blocks used by the bios */
-         struct erase_info instr;
--	struct nand_ecclayout oobinfo;
- };
- 
- int NFTL_mount(struct NFTLrecord *s);
---- a/include/linux/mtd/onenand.h
-+++ b/include/linux/mtd/onenand.h
-@@ -80,7 +80,6 @@ struct onenand_bufferram {
-  * @page_buf:		[INTERN] page main data buffer
-  * @oob_buf:		[INTERN] page oob data buffer
-  * @subpagesize:	[INTERN] holds the subpagesize
-- * @ecclayout:		[REPLACEABLE] the default ecc placement scheme
-  * @bbm:		[REPLACEABLE] pointer to Bad Block Management
-  * @priv:		[OPTIONAL] pointer to private chip date
-  */
-@@ -134,7 +133,6 @@ struct onenand_chip {
- #endif
- 
- 	int			subpagesize;
--	struct nand_ecclayout	*ecclayout;
- 
- 	void			*bbm;
- 
---- a/include/linux/mtd/partitions.h
-+++ b/include/linux/mtd/partitions.h
-@@ -42,7 +42,6 @@ struct mtd_partition {
- 	uint64_t size;			/* partition size */
- 	uint64_t offset;		/* offset within the master MTD space */
- 	uint32_t mask_flags;		/* master MTD flags to mask out for this partition */
--	struct nand_ecclayout *ecclayout;	/* out of band layout for this partition (NAND only) */
- };
- 
- #define MTDPART_OFS_RETAIN	(-3)
-@@ -56,11 +55,9 @@ struct device_node;
- /**
-  * struct mtd_part_parser_data - used to pass data to MTD partition parsers.
-  * @origin: for RedBoot, start address of MTD device
-- * @of_node: for OF parsers, device node containing partitioning information
-  */
- struct mtd_part_parser_data {
- 	unsigned long origin;
--	struct device_node *of_node;
- };
- 
- 
-@@ -78,14 +75,34 @@ struct mtd_part_parser {
- 	struct list_head list;
- 	struct module *owner;
- 	const char *name;
--	int (*parse_fn)(struct mtd_info *, struct mtd_partition **,
-+	int (*parse_fn)(struct mtd_info *, const struct mtd_partition **,
- 			struct mtd_part_parser_data *);
-+	void (*cleanup)(const struct mtd_partition *pparts, int nr_parts);
- 	enum mtd_parser_type type;
- };
- 
--extern void register_mtd_parser(struct mtd_part_parser *parser);
-+/* Container for passing around a set of parsed partitions */
-+struct mtd_partitions {
-+	const struct mtd_partition *parts;
-+	int nr_parts;
-+	const struct mtd_part_parser *parser;
-+};
-+
-+extern int __register_mtd_parser(struct mtd_part_parser *parser,
-+				 struct module *owner);
-+#define register_mtd_parser(parser) __register_mtd_parser(parser, THIS_MODULE)
-+
- extern void deregister_mtd_parser(struct mtd_part_parser *parser);
- 
-+/*
-+ * module_mtd_part_parser() - Helper macro for MTD partition parsers that don't
-+ * do anything special in module init/exit. Each driver may only use this macro
-+ * once, and calling it replaces module_init() and module_exit().
-+ */
-+#define module_mtd_part_parser(__mtd_part_parser) \
-+	module_driver(__mtd_part_parser, register_mtd_parser, \
-+		      deregister_mtd_parser)
-+
- int mtd_is_partition(const struct mtd_info *mtd);
- int mtd_add_partition(struct mtd_info *master, const char *name,
- 		      long long offset, long long length);
---- a/include/linux/mtd/sh_flctl.h
-+++ b/include/linux/mtd/sh_flctl.h
-@@ -143,7 +143,6 @@ enum flctl_ecc_res_t {
- struct dma_chan;
- 
- struct sh_flctl {
--	struct mtd_info		mtd;
- 	struct nand_chip	chip;
- 	struct platform_device	*pdev;
- 	struct dev_pm_qos_request pm_qos;
-@@ -187,7 +186,7 @@ struct sh_flctl_platform_data {
- 
- static inline struct sh_flctl *mtd_to_flctl(struct mtd_info *mtdinfo)
- {
--	return container_of(mtdinfo, struct sh_flctl, mtd);
-+	return container_of(mtd_to_nand(mtdinfo), struct sh_flctl, chip);
- }
- 
- #endif	/* __SH_FLCTL_H__ */
---- a/include/linux/mtd/sharpsl.h
-+++ b/include/linux/mtd/sharpsl.h
-@@ -14,7 +14,7 @@
- 
- struct sharpsl_nand_platform_data {
- 	struct nand_bbt_descr	*badblock_pattern;
--	struct nand_ecclayout	*ecc_layout;
-+	const struct mtd_ooblayout_ops *ecc_layout;
- 	struct mtd_partition	*partitions;
- 	unsigned int		nr_partitions;
- };
---- a/include/uapi/mtd/mtd-abi.h
-+++ b/include/uapi/mtd/mtd-abi.h
-@@ -228,7 +228,7 @@ struct nand_oobfree {
-  * complete set of ECC information. The ioctl truncates the larger internal
-  * structure to retain binary compatibility with the static declaration of the
-  * ioctl. Note that the "MTD_MAX_..._ENTRIES" macros represent the max size of
-- * the user struct, not the MAX size of the internal struct nand_ecclayout.
-+ * the user struct, not the MAX size of the internal OOB layout representation.
-  */
- struct nand_ecclayout_user {
- 	__u32 eccbytes;
---- a/fs/jffs2/wbuf.c
-+++ b/fs/jffs2/wbuf.c
-@@ -1153,7 +1153,7 @@ static struct jffs2_sb_info *work_to_sb(
- {
- 	struct delayed_work *dwork;
- 
--	dwork = container_of(work, struct delayed_work, work);
-+	dwork = to_delayed_work(work);
- 	return container_of(dwork, struct jffs2_sb_info, wbuf_dwork);
- }
- 
-@@ -1183,22 +1183,20 @@ void jffs2_dirty_trigger(struct jffs2_sb
- 
- int jffs2_nand_flash_setup(struct jffs2_sb_info *c)
- {
--	struct nand_ecclayout *oinfo = c->mtd->ecclayout;
--
- 	if (!c->mtd->oobsize)
- 		return 0;
- 
- 	/* Cleanmarker is out-of-band, so inline size zero */
- 	c->cleanmarker_size = 0;
- 
--	if (!oinfo || oinfo->oobavail == 0) {
-+	if (c->mtd->oobavail == 0) {
- 		pr_err("inconsistent device description\n");
- 		return -EINVAL;
- 	}
- 
- 	jffs2_dbg(1, "using OOB on NAND\n");
- 
--	c->oobavail = oinfo->oobavail;
-+	c->oobavail = c->mtd->oobavail;
- 
- 	/* Initialise write buffer */
- 	init_rwsem(&c->wbuf_sem);
---- a/include/linux/mtd/spi-nor.h
-+++ b/include/linux/mtd/spi-nor.h
-@@ -85,6 +85,7 @@
- #define SR_BP0			BIT(2)	/* Block protect 0 */
- #define SR_BP1			BIT(3)	/* Block protect 1 */
- #define SR_BP2			BIT(4)	/* Block protect 2 */
-+#define SR_TB			BIT(5)	/* Top/Bottom protect */
- #define SR_SRWD			BIT(7)	/* SR write protect */
- 
- #define SR_QUAD_EN_MX		BIT(6)	/* Macronix Quad I/O */
-@@ -116,6 +117,7 @@ enum spi_nor_ops {
- 
- enum spi_nor_option_flags {
- 	SNOR_F_USE_FSR		= BIT(0),
-+	SNOR_F_HAS_SR_TB	= BIT(1),
- };
- 
- /**
-@@ -123,7 +125,6 @@ enum spi_nor_option_flags {
-  * @mtd:		point to a mtd_info structure
-  * @lock:		the lock for the read/write/erase/lock/unlock operations
-  * @dev:		point to a spi device, or a spi nor controller device.
-- * @flash_node:		point to a device node describing this flash instance.
-  * @page_size:		the page size of the SPI NOR
-  * @addr_width:		number of address bytes
-  * @erase_opcode:	the opcode for erasing a sector
-@@ -143,7 +144,8 @@ enum spi_nor_option_flags {
-  * @read:		[DRIVER-SPECIFIC] read data from the SPI NOR
-  * @write:		[DRIVER-SPECIFIC] write data to the SPI NOR
-  * @erase:		[DRIVER-SPECIFIC] erase a sector of the SPI NOR
-- *			at the offset @offs
-+ *			at the offset @offs; if not provided by the driver,
-+ *			spi-nor will send the erase opcode via write_reg()
-  * @flash_lock:		[FLASH-SPECIFIC] lock a region of the SPI NOR
-  * @flash_unlock:	[FLASH-SPECIFIC] unlock a region of the SPI NOR
-  * @flash_is_locked:	[FLASH-SPECIFIC] check if a region of the SPI NOR is
-@@ -154,7 +156,6 @@ struct spi_nor {
- 	struct mtd_info		mtd;
- 	struct mutex		lock;
- 	struct device		*dev;
--	struct device_node	*flash_node;
- 	u32			page_size;
- 	u8			addr_width;
- 	u8			erase_opcode;
-@@ -184,6 +185,17 @@ struct spi_nor {
- 	void *priv;
- };
- 
-+static inline void spi_nor_set_flash_node(struct spi_nor *nor,
-+					  struct device_node *np)
-+{
-+	mtd_set_of_node(&nor->mtd, np);
-+}
-+
-+static inline struct device_node *spi_nor_get_flash_node(struct spi_nor *nor)
-+{
-+	return mtd_get_of_node(&nor->mtd);
-+}
-+
- /**
-  * spi_nor_scan() - scan the SPI NOR
-  * @nor:	the spi_nor structure
diff --git a/target/linux/oxnas/patches-4.4/0073-of-mtd-prepare-helper-reading-NAND-ECC-algo-from-DT.patch b/target/linux/oxnas/patches-4.4/0073-of-mtd-prepare-helper-reading-NAND-ECC-algo-from-DT.patch
deleted file mode 100644
index aa45441afa..0000000000
--- a/target/linux/oxnas/patches-4.4/0073-of-mtd-prepare-helper-reading-NAND-ECC-algo-from-DT.patch
+++ /dev/null
@@ -1,91 +0,0 @@
-From 410a91f6efa1c4c3c4369d1dd2c31286749dff33 Mon Sep 17 00:00:00 2001
-From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <zajec5@gmail.com>
-Date: Wed, 23 Mar 2016 11:19:01 +0100
-Subject: [PATCH 073/102] of: mtd: prepare helper reading NAND ECC algo from
- DT
-MIME-Version: 1.0
-Content-Type: text/plain; charset=UTF-8
-Content-Transfer-Encoding: 8bit
-
-NAND subsystem is being slightly reworked to store ECC details in
-separated fields. In future we'll want to add support for more DT
-properties as specifying every possible setup with a single
-"nand-ecc-mode" is a pretty bad idea.
-To allow this let's add a helper that will support something like
-"nand-ecc-algo" in future. Right now we use it for keeping backward
-compatibility.
-
-Signed-off-by: Rafał Miłecki <zajec5@gmail.com>
-Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
----
- drivers/of/of_mtd.c    |   36 ++++++++++++++++++++++++++++++++++++
- include/linux/of_mtd.h |    6 ++++++
- 2 files changed, 42 insertions(+)
-
---- a/drivers/of/of_mtd.c
-+++ b/drivers/of/of_mtd.c
-@@ -50,6 +50,42 @@ int of_get_nand_ecc_mode(struct device_n
- EXPORT_SYMBOL_GPL(of_get_nand_ecc_mode);
- 
- /**
-+ * of_get_nand_ecc_algo - Get nand ecc algorithm for given device_node
-+ * @np:	Pointer to the given device_node
-+ *
-+ * The function gets ecc algorithm and returns its enum value, or errno in error
-+ * case.
-+ */
-+int of_get_nand_ecc_algo(struct device_node *np)
-+{
-+	const char *pm;
-+	int err;
-+
-+	/*
-+	 * TODO: Read ECC algo OF property and map it to enum nand_ecc_algo.
-+	 * It's not implemented yet as currently NAND subsystem ignores
-+	 * algorithm explicitly set this way. Once it's handled we should
-+	 * document & support new property.
-+	 */
-+
-+	/*
-+	 * For backward compatibility we also read "nand-ecc-mode" checking
-+	 * for some obsoleted values that were specifying ECC algorithm.
-+	 */
-+	err = of_property_read_string(np, "nand-ecc-mode", &pm);
-+	if (err < 0)
-+		return err;
-+
-+	if (!strcasecmp(pm, "soft"))
-+		return NAND_ECC_HAMMING;
-+	else if (!strcasecmp(pm, "soft_bch"))
-+		return NAND_ECC_BCH;
-+
-+	return -ENODEV;
-+}
-+EXPORT_SYMBOL_GPL(of_get_nand_ecc_algo);
-+
-+/**
-  * of_get_nand_ecc_step_size - Get ECC step size associated to
-  * the required ECC strength (see below).
-  * @np:	Pointer to the given device_node
---- a/include/linux/of_mtd.h
-+++ b/include/linux/of_mtd.h
-@@ -13,6 +13,7 @@
- 
- #include <linux/of.h>
- int of_get_nand_ecc_mode(struct device_node *np);
-+int of_get_nand_ecc_algo(struct device_node *np);
- int of_get_nand_ecc_step_size(struct device_node *np);
- int of_get_nand_ecc_strength(struct device_node *np);
- int of_get_nand_bus_width(struct device_node *np);
-@@ -24,6 +25,11 @@ static inline int of_get_nand_ecc_mode(s
- {
- 	return -ENOSYS;
- }
-+
-+static inline int of_get_nand_ecc_algo(struct device_node *np)
-+{
-+	return -ENOSYS;
-+}
- 
- static inline int of_get_nand_ecc_step_size(struct device_node *np)
- {
diff --git a/target/linux/oxnas/patches-4.4/0074-mtd-nand-import-nand_hw_control_init.patch b/target/linux/oxnas/patches-4.4/0074-mtd-nand-import-nand_hw_control_init.patch
deleted file mode 100644
index 8ff28b3bc2..0000000000
--- a/target/linux/oxnas/patches-4.4/0074-mtd-nand-import-nand_hw_control_init.patch
+++ /dev/null
@@ -1,175 +0,0 @@
-From d45bc58dd3bdcaabc1d7d8d9b0b8dee826635cc6 Mon Sep 17 00:00:00 2001
-From: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
-Date: Wed, 27 Jul 2016 11:23:52 +0200
-Subject: [PATCH] mtd: nand: import nand_hw_control_init()
-
-The code to initialize a struct nand_hw_control is duplicated across
-several drivers. Factorize it using an inline function.
-
-Signed-off-by: Marc Gonzalez <marc_gonzalez@sigmadesigns.com>
-Signed-off-by: Boris Brezillon <boris.brezillon@free-electrons.com>
----
- drivers/mtd/nand/bf5xx_nand.c        | 3 +--
- drivers/mtd/nand/brcmnand/brcmnand.c | 3 +--
- drivers/mtd/nand/docg4.c             | 3 +--
- drivers/mtd/nand/fsl_elbc_nand.c     | 3 +--
- drivers/mtd/nand/fsl_ifc_nand.c      | 3 +--
- drivers/mtd/nand/jz4780_nand.c       | 3 +--
- drivers/mtd/nand/nand_base.c         | 3 +--
- drivers/mtd/nand/ndfc.c              | 3 +--
- drivers/mtd/nand/pxa3xx_nand.c       | 3 +--
- drivers/mtd/nand/qcom_nandc.c        | 3 +--
- drivers/mtd/nand/s3c2410.c           | 3 +--
- drivers/mtd/nand/sunxi_nand.c        | 3 +--
- drivers/mtd/nand/txx9ndfmc.c         | 3 +--
- include/linux/mtd/nand.h             | 7 +++++++
- 14 files changed, 20 insertions(+), 26 deletions(-)
-
---- a/drivers/mtd/nand/bf5xx_nand.c
-+++ b/drivers/mtd/nand/bf5xx_nand.c
-@@ -748,8 +748,7 @@ static int bf5xx_nand_probe(struct platf
- 
- 	platform_set_drvdata(pdev, info);
- 
--	spin_lock_init(&info->controller.lock);
--	init_waitqueue_head(&info->controller.wq);
-+	nand_hw_control_init(&info->controller);
- 
- 	info->device     = &pdev->dev;
- 	info->platform   = plat;
---- a/drivers/mtd/nand/brcmnand/brcmnand.c
-+++ b/drivers/mtd/nand/brcmnand/brcmnand.c
-@@ -2149,8 +2149,7 @@ int brcmnand_probe(struct platform_devic
- 
- 	init_completion(&ctrl->done);
- 	init_completion(&ctrl->dma_done);
--	spin_lock_init(&ctrl->controller.lock);
--	init_waitqueue_head(&ctrl->controller.wq);
-+	nand_hw_control_init(&ctrl->controller);
- 	INIT_LIST_HEAD(&ctrl->host_list);
- 
- 	/* NAND register range */
---- a/drivers/mtd/nand/docg4.c
-+++ b/drivers/mtd/nand/docg4.c
-@@ -1227,8 +1227,7 @@ static void __init init_mtd_structs(stru
- 	nand->options = NAND_BUSWIDTH_16 | NAND_NO_SUBPAGE_WRITE;
- 	nand->IO_ADDR_R = nand->IO_ADDR_W = doc->virtadr + DOC_IOSPACE_DATA;
- 	nand->controller = &nand->hwcontrol;
--	spin_lock_init(&nand->controller->lock);
--	init_waitqueue_head(&nand->controller->wq);
-+	nand_hw_control_init(nand->controller);
- 
- 	/* methods */
- 	nand->cmdfunc = docg4_command;
---- a/drivers/mtd/nand/fsl_elbc_nand.c
-+++ b/drivers/mtd/nand/fsl_elbc_nand.c
-@@ -866,8 +866,7 @@ static int fsl_elbc_nand_probe(struct pl
- 		}
- 		elbc_fcm_ctrl->counter++;
- 
--		spin_lock_init(&elbc_fcm_ctrl->controller.lock);
--		init_waitqueue_head(&elbc_fcm_ctrl->controller.wq);
-+		nand_hw_control_init(&elbc_fcm_ctrl->controller);
- 		fsl_lbc_ctrl_dev->nand = elbc_fcm_ctrl;
- 	} else {
- 		elbc_fcm_ctrl = fsl_lbc_ctrl_dev->nand;
---- a/drivers/mtd/nand/fsl_ifc_nand.c
-+++ b/drivers/mtd/nand/fsl_ifc_nand.c
-@@ -1073,8 +1073,7 @@ static int fsl_ifc_nand_probe(struct pla
- 		ifc_nand_ctrl->addr = NULL;
- 		fsl_ifc_ctrl_dev->nand = ifc_nand_ctrl;
- 
--		spin_lock_init(&ifc_nand_ctrl->controller.lock);
--		init_waitqueue_head(&ifc_nand_ctrl->controller.wq);
-+		nand_hw_control_init(&ifc_nand_ctrl->controller);
- 	} else {
- 		ifc_nand_ctrl = fsl_ifc_ctrl_dev->nand;
- 	}
---- a/drivers/mtd/nand/nand_base.c
-+++ b/drivers/mtd/nand/nand_base.c
-@@ -3208,8 +3208,7 @@ static void nand_set_defaults(struct nan
- 
- 	if (!chip->controller) {
- 		chip->controller = &chip->hwcontrol;
--		spin_lock_init(&chip->controller->lock);
--		init_waitqueue_head(&chip->controller->wq);
-+		nand_hw_control_init(chip->controller);
- 	}
- 
- }
---- a/drivers/mtd/nand/ndfc.c
-+++ b/drivers/mtd/nand/ndfc.c
-@@ -220,8 +220,7 @@ static int ndfc_probe(struct platform_de
- 	ndfc = &ndfc_ctrl[cs];
- 	ndfc->chip_select = cs;
- 
--	spin_lock_init(&ndfc->ndfc_control.lock);
--	init_waitqueue_head(&ndfc->ndfc_control.wq);
-+	nand_hw_control_init(&ndfc->ndfc_control);
- 	ndfc->ofdev = ofdev;
- 	dev_set_drvdata(&ofdev->dev, ndfc);
- 
---- a/drivers/mtd/nand/pxa3xx_nand.c
-+++ b/drivers/mtd/nand/pxa3xx_nand.c
-@@ -1739,8 +1739,7 @@ static int alloc_nand_resource(struct pl
- 		chip->cmdfunc		= nand_cmdfunc;
- 	}
- 
--	spin_lock_init(&chip->controller->lock);
--	init_waitqueue_head(&chip->controller->wq);
-+	nand_hw_control_init(chip->controller);
- 	info->clk = devm_clk_get(&pdev->dev, NULL);
- 	if (IS_ERR(info->clk)) {
- 		dev_err(&pdev->dev, "failed to get nand clock\n");
---- a/drivers/mtd/nand/s3c2410.c
-+++ b/drivers/mtd/nand/s3c2410.c
-@@ -955,8 +955,7 @@ static int s3c24xx_nand_probe(struct pla
- 
- 	platform_set_drvdata(pdev, info);
- 
--	spin_lock_init(&info->controller.lock);
--	init_waitqueue_head(&info->controller.wq);
-+	nand_hw_control_init(&info->controller);
- 
- 	/* get the clock source and enable it */
- 
---- a/drivers/mtd/nand/sunxi_nand.c
-+++ b/drivers/mtd/nand/sunxi_nand.c
-@@ -1432,8 +1432,7 @@ static int sunxi_nfc_probe(struct platfo
- 		return -ENOMEM;
- 
- 	nfc->dev = dev;
--	spin_lock_init(&nfc->controller.lock);
--	init_waitqueue_head(&nfc->controller.wq);
-+	nand_hw_control_init(&nfc->controller);
- 	INIT_LIST_HEAD(&nfc->chips);
- 
- 	r = platform_get_resource(pdev, IORESOURCE_MEM, 0);
---- a/drivers/mtd/nand/txx9ndfmc.c
-+++ b/drivers/mtd/nand/txx9ndfmc.c
-@@ -304,8 +304,7 @@ static int __init txx9ndfmc_probe(struct
- 	dev_info(&dev->dev, "CLK:%ldMHz HOLD:%d SPW:%d\n",
- 		 (gbusclk + 500000) / 1000000, hold, spw);
- 
--	spin_lock_init(&drvdata->hw_control.lock);
--	init_waitqueue_head(&drvdata->hw_control.wq);
-+	nand_hw_control_init(&drvdata->hw_control);
- 
- 	platform_set_drvdata(dev, drvdata);
- 	txx9ndfmc_initialize(dev);
---- a/include/linux/mtd/nand.h
-+++ b/include/linux/mtd/nand.h
-@@ -461,6 +461,13 @@ struct nand_hw_control {
- 	wait_queue_head_t wq;
- };
- 
-+static inline void nand_hw_control_init(struct nand_hw_control *nfc)
-+{
-+	nfc->active = NULL;
-+	spin_lock_init(&nfc->lock);
-+	init_waitqueue_head(&nfc->wq);
-+}
-+
- /**
-  * struct nand_ecc_ctrl - Control structure for ECC
-  * @mode:	ECC mode
diff --git a/target/linux/oxnas/patches-4.4/010-arm_introduce-dma-fiq-irq-broadcast.patch b/target/linux/oxnas/patches-4.4/010-arm_introduce-dma-fiq-irq-broadcast.patch
deleted file mode 100644
index 024675e599..0000000000
--- a/target/linux/oxnas/patches-4.4/010-arm_introduce-dma-fiq-irq-broadcast.patch
+++ /dev/null
@@ -1,80 +0,0 @@
---- a/arch/arm/include/asm/glue-cache.h
-+++ b/arch/arm/include/asm/glue-cache.h
-@@ -156,9 +156,15 @@ static inline void nop_dma_unmap_area(co
- #define __cpuc_flush_user_range		__glue(_CACHE,_flush_user_cache_range)
- #define __cpuc_coherent_kern_range	__glue(_CACHE,_coherent_kern_range)
- #define __cpuc_coherent_user_range	__glue(_CACHE,_coherent_user_range)
--#define __cpuc_flush_dcache_area	__glue(_CACHE,_flush_kern_dcache_area)
- 
--#define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
-+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
-+# define __cpuc_flush_dcache_area	__glue(_CACHE,_flush_kern_dcache_area)
-+# define dmac_flush_range		__glue(_CACHE,_dma_flush_range)
-+#else
-+# define __cpuc_flush_dcache_area	__glue(fiq,_flush_kern_dcache_area)
-+# define dmac_flush_range		__glue(fiq,_dma_flush_range)
-+#endif
-+
- #endif
- 
- #endif
---- a/arch/arm/mm/Kconfig
-+++ b/arch/arm/mm/Kconfig
-@@ -866,6 +866,17 @@ config DMA_CACHE_RWFO
- 	  in hardware, other workarounds are needed (e.g. cache
- 	  maintenance broadcasting in software via FIQ).
- 
-+config DMA_CACHE_FIQ_BROADCAST
-+	bool "Enable fiq broadcast DMA cache maintenance"
-+	depends on CPU_V6K && SMP
-+	select FIQ
-+	help
-+	  The Snoop Control Unit on ARM11MPCore does not detect the
-+	  cache maintenance operations and the dma_{map,unmap}_area()
-+	  functions may leave stale cache entries on other CPUs. By
-+	  enabling this option, fiq broadcast in the ARMv6
-+	  DMA cache maintenance functions is performed.
-+
- config OUTER_CACHE
- 	bool
- 
---- a/arch/arm/mm/flush.c
-+++ b/arch/arm/mm/flush.c
-@@ -319,6 +319,7 @@ void __sync_icache_dcache(pte_t pteval)
- void flush_dcache_page(struct page *page)
- {
- 	struct address_space *mapping;
-+	bool skip_broadcast = true;
- 
- 	/*
- 	 * The zero page is never written to, so never has any dirty
-@@ -329,7 +330,10 @@ void flush_dcache_page(struct page *page
- 
- 	mapping = page_mapping(page);
- 
--	if (!cache_ops_need_broadcast() &&
-+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
-+	skip_broadcast = !cache_ops_need_broadcast();
-+#endif
-+	if (skip_broadcast &&
- 	    mapping && !page_mapped(page))
- 		clear_bit(PG_dcache_clean, &page->flags);
- 	else {
---- a/arch/arm/mm/dma.h
-+++ b/arch/arm/mm/dma.h
-@@ -4,8 +4,13 @@
- #include <asm/glue-cache.h>
- 
- #ifndef MULTI_CACHE
--#define dmac_map_area			__glue(_CACHE,_dma_map_area)
--#define dmac_unmap_area 		__glue(_CACHE,_dma_unmap_area)
-+#ifndef CONFIG_DMA_CACHE_FIQ_BROADCAST
-+# define dmac_map_area			__glue(_CACHE,_dma_map_area)
-+# define dmac_unmap_area 		__glue(_CACHE,_dma_unmap_area)
-+#else
-+# define dmac_map_area			__glue(fiq,_dma_map_area)
-+# define dmac_unmap_area			__glue(fiq,_dma_unmap_area)
-+#endif
- 
- /*
-  * These are private to the dma-mapping API.  Do not use directly.
diff --git a/target/linux/oxnas/patches-4.4/250-add-plxtech-vendor-prefix.patch b/target/linux/oxnas/patches-4.4/250-add-plxtech-vendor-prefix.patch
deleted file mode 100644
index a94ac2277b..0000000000
--- a/target/linux/oxnas/patches-4.4/250-add-plxtech-vendor-prefix.patch
+++ /dev/null
@@ -1,10 +0,0 @@
---- a/Documentation/devicetree/bindings/vendor-prefixes.txt
-+++ b/Documentation/devicetree/bindings/vendor-prefixes.txt
-@@ -175,6 +175,7 @@ picochip	Picochip Ltd
- plathome	Plat'Home Co., Ltd.
- plda	PLDA
- pixcir  PIXCIR MICROELECTRONICS Co., Ltd
-+plxtech	PLX Technology, Inc.
- pulsedlight	PulsedLight, Inc
- powervr	PowerVR (deprecated, use img)
- qca	Qualcomm Atheros, Inc.
diff --git a/target/linux/oxnas/patches-4.4/300-introduce-oxnas-platform.patch b/target/linux/oxnas/patches-4.4/300-introduce-oxnas-platform.patch
deleted file mode 100644
index a88d5d94b5..0000000000
--- a/target/linux/oxnas/patches-4.4/300-introduce-oxnas-platform.patch
+++ /dev/null
@@ -1,71 +0,0 @@
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -603,6 +603,19 @@ config ARCH_LPC32XX
- 	help
- 	  Support for the NXP LPC32XX family of processors
- 
-+config ARCH_OXNAS
-+	bool "Oxford Semiconductor 815/820/825 NAS SoC"
-+	select ARM_GIC
-+	select ARCH_REQUIRE_GPIOLIB
-+	select CLKDEV_LOOKUP
-+	select GENERIC_CLOCKEVENTS
-+	select COMMON_CLK
-+	select MIGHT_HAVE_PCI
-+	select ARCH_HAS_RESET_CONTROLLER
-+	help
-+		This enables support for Oxford 815/820/825 NAS SoC
-+		later renamed to PLXTECH NAS782x.
-+
- config ARCH_PXA
- 	bool "PXA2xx/PXA3xx-based"
- 	depends on MMU
-@@ -883,6 +896,8 @@ source "arch/arm/mach-omap2/Kconfig"
- 
- source "arch/arm/mach-orion5x/Kconfig"
- 
-+source "arch/arm/mach-oxnas/Kconfig"
-+
- source "arch/arm/mach-picoxcell/Kconfig"
- 
- source "arch/arm/mach-pxa/Kconfig"
---- a/arch/arm/Makefile
-+++ b/arch/arm/Makefile
-@@ -200,6 +200,7 @@ machine-$(CONFIG_ARCH_NSPIRE)		+= nspire
- machine-$(CONFIG_ARCH_OMAP1)		+= omap1
- machine-$(CONFIG_ARCH_OMAP2PLUS)	+= omap2
- machine-$(CONFIG_ARCH_ORION5X)		+= orion5x
-+machine-$(CONFIG_ARCH_OXNAS)		+= oxnas
- machine-$(CONFIG_ARCH_PICOXCELL)	+= picoxcell
- machine-$(CONFIG_ARCH_PXA)		+= pxa
- machine-$(CONFIG_ARCH_QCOM)		+= qcom
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -497,6 +497,7 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
- 	orion5x-lswsgl.dtb \
- 	orion5x-maxtor-shared-storage-2.dtb \
- 	orion5x-rd88f5182-nas.dtb
-+dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb
- dtb-$(CONFIG_ARCH_PRIMA2) += \
- 	prima2-evb.dtb
- dtb-$(CONFIG_ARCH_QCOM) += \
---- a/arch/arm/tools/mach-types
-+++ b/arch/arm/tools/mach-types
-@@ -228,6 +228,7 @@ edb9302a		MACH_EDB9302A		EDB9302A		1127
- edb9307a		MACH_EDB9307A		EDB9307A		1128
- omap_3430sdp		MACH_OMAP_3430SDP	OMAP_3430SDP		1138
- vstms			MACH_VSTMS		VSTMS			1140
-+ox820			MACH_OX820		OX820			1152
- micro9m			MACH_MICRO9M		MICRO9M			1169
- bug			MACH_BUG		BUG			1179
- at91sam9263ek		MACH_AT91SAM9263EK	AT91SAM9263EK		1202
---- a/drivers/clk/Makefile
-+++ b/drivers/clk/Makefile
-@@ -32,6 +32,7 @@ obj-$(CONFIG_ARCH_MB86S7X)		+= clk-mb86s
- obj-$(CONFIG_ARCH_MOXART)		+= clk-moxart.o
- obj-$(CONFIG_ARCH_NOMADIK)		+= clk-nomadik.o
- obj-$(CONFIG_ARCH_NSPIRE)		+= clk-nspire.o
-+obj-$(CONFIG_ARCH_OXNAS)		+= clk-oxnas.o
- obj-$(CONFIG_COMMON_CLK_PALMAS)		+= clk-palmas.o
- obj-$(CONFIG_CLK_QORIQ)			+= clk-qoriq.o
- obj-$(CONFIG_COMMON_CLK_RK808)		+= clk-rk808.o
diff --git a/target/linux/oxnas/patches-4.4/310-oxnas-clocksource.patch b/target/linux/oxnas/patches-4.4/310-oxnas-clocksource.patch
deleted file mode 100644
index efb058dbb4..0000000000
--- a/target/linux/oxnas/patches-4.4/310-oxnas-clocksource.patch
+++ /dev/null
@@ -1,25 +0,0 @@
---- a/drivers/clocksource/Kconfig
-+++ b/drivers/clocksource/Kconfig
-@@ -222,6 +222,12 @@ config VF_PIT_TIMER
- 	help
- 	  Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
- 
-+config CLKSRC_RPS_TIMER
-+	def_bool y if ARCH_OXNAS
-+	select CLKSRC_MMIO
-+	help
-+	  This option enables support for the oxnas rps timers.
-+
- config SYS_SUPPORTS_SH_CMT
-         bool
- 
---- a/drivers/clocksource/Makefile
-+++ b/drivers/clocksource/Makefile
-@@ -41,6 +41,7 @@ obj-$(CONFIG_CLKSRC_EXYNOS_MCT)	+= exyno
- obj-$(CONFIG_CLKSRC_LPC32XX)	+= time-lpc32xx.o
- obj-$(CONFIG_CLKSRC_SAMSUNG_PWM)	+= samsung_pwm_timer.o
- obj-$(CONFIG_FSL_FTM_TIMER)	+= fsl_ftm_timer.o
-+obj-$(CONFIG_CLKSRC_RPS_TIMER)	+= oxnas_rps_timer.o
- obj-$(CONFIG_VF_PIT_TIMER)	+= vf_pit_timer.o
- obj-$(CONFIG_CLKSRC_QCOM)	+= qcom-timer.o
- obj-$(CONFIG_MTK_TIMER)		+= mtk_timer.o
diff --git a/target/linux/oxnas/patches-4.4/320-oxnas-irqchip.patch b/target/linux/oxnas/patches-4.4/320-oxnas-irqchip.patch
deleted file mode 100644
index 37918d680b..0000000000
--- a/target/linux/oxnas/patches-4.4/320-oxnas-irqchip.patch
+++ /dev/null
@@ -1,34 +0,0 @@
---- a/drivers/irqchip/Kconfig
-+++ b/drivers/irqchip/Kconfig
-@@ -27,6 +27,11 @@ config ARM_GIC_V3_ITS
- 	bool
- 	select PCI_MSI_IRQ_DOMAIN
- 
-+config PLXTECH_RPS
-+	def_bool y if ARHC_OXNAS
-+	depends on ARCH_OXNAS
-+	select IRQ_DOMAIN
-+
- config ARM_NVIC
- 	bool
- 	select IRQ_DOMAIN
---- a/drivers/irqchip/Makefile
-+++ b/drivers/irqchip/Makefile
-@@ -34,6 +34,7 @@ obj-$(CONFIG_IRQ_MIPS_CPU)		+= irq-mips-
- obj-$(CONFIG_SIRF_IRQ)			+= irq-sirfsoc.o
- obj-$(CONFIG_RENESAS_INTC_IRQPIN)	+= irq-renesas-intc-irqpin.o
- obj-$(CONFIG_RENESAS_IRQC)		+= irq-renesas-irqc.o
-+obj-$(CONFIG_PLXTECH_RPS)		+= irq-rps.o
- obj-$(CONFIG_VERSATILE_FPGA_IRQ)	+= irq-versatile-fpga.o
- obj-$(CONFIG_ARCH_NSPIRE)		+= irq-zevio.o
- obj-$(CONFIG_ARCH_VT8500)		+= irq-vt8500.o
---- a/drivers/irqchip/irq-gic.c
-+++ b/drivers/irqchip/irq-gic.c
-@@ -1253,6 +1253,7 @@ IRQCHIP_DECLARE(arm1176jzf_dc_gic, "arm,
- IRQCHIP_DECLARE(cortex_a15_gic, "arm,cortex-a15-gic", gic_of_init);
- IRQCHIP_DECLARE(cortex_a9_gic, "arm,cortex-a9-gic", gic_of_init);
- IRQCHIP_DECLARE(cortex_a7_gic, "arm,cortex-a7-gic", gic_of_init);
-+IRQCHIP_DECLARE(arm11_mpcore_gic, "arm,arm11mp-gic", gic_of_init);
- IRQCHIP_DECLARE(msm_8660_qgic, "qcom,msm-8660-qgic", gic_of_init);
- IRQCHIP_DECLARE(msm_qgic2, "qcom,msm-qgic2", gic_of_init);
- IRQCHIP_DECLARE(pl390, "arm,pl390", gic_of_init);
diff --git a/target/linux/oxnas/patches-4.4/330-oxnas-pinctrl.patch b/target/linux/oxnas/patches-4.4/330-oxnas-pinctrl.patch
deleted file mode 100644
index 76a19267a2..0000000000
--- a/target/linux/oxnas/patches-4.4/330-oxnas-pinctrl.patch
+++ /dev/null
@@ -1,28 +0,0 @@
---- a/drivers/pinctrl/Kconfig
-+++ b/drivers/pinctrl/Kconfig
-@@ -228,6 +228,15 @@ config PINCTRL_COH901
- 	  COH 901 335 and COH 901 571/3. They contain 3, 5 or 7
- 	  ports of 8 GPIO pins each.
- 
-+config PINCTRL_OXNAS
-+	bool "OXNAS pinctrl driver"
-+	depends on OF
-+	depends on ARCH_OXNAS
-+	select PINMUX
-+	select PINCONF
-+	help
-+	  Say Y here to enable the oxnas pinctrl driver
-+
- config PINCTRL_PALMAS
- 	bool "Pinctrl driver for the PALMAS Series MFD devices"
- 	depends on OF && MFD_PALMAS
---- a/drivers/pinctrl/Makefile
-+++ b/drivers/pinctrl/Makefile
-@@ -17,6 +17,7 @@ obj-$(CONFIG_PINCTRL_AMD)	+= pinctrl-amd
- obj-$(CONFIG_PINCTRL_DIGICOLOR)	+= pinctrl-digicolor.o
- obj-$(CONFIG_PINCTRL_FALCON)	+= pinctrl-falcon.o
- obj-$(CONFIG_PINCTRL_MESON)	+= meson/
-+obj-$(CONFIG_PINCTRL_OXNAS)	+= pinctrl-oxnas.o
- obj-$(CONFIG_PINCTRL_PALMAS)	+= pinctrl-palmas.o
- obj-$(CONFIG_PINCTRL_PISTACHIO)	+= pinctrl-pistachio.o
- obj-$(CONFIG_PINCTRL_ROCKCHIP)	+= pinctrl-rockchip.o
diff --git a/target/linux/oxnas/patches-4.4/340-oxnas-pcie.patch b/target/linux/oxnas/patches-4.4/340-oxnas-pcie.patch
deleted file mode 100644
index edc23b70a1..0000000000
--- a/target/linux/oxnas/patches-4.4/340-oxnas-pcie.patch
+++ /dev/null
@@ -1,22 +0,0 @@
---- a/drivers/pci/host/Kconfig
-+++ b/drivers/pci/host/Kconfig
-@@ -173,4 +173,9 @@ config PCI_HISI
- 	help
- 	  Say Y here if you want PCIe controller support on HiSilicon HIP05 SoC
- 
-+config PCI_OXNAS
-+	bool "PLX Oxnas PCIe controller"
-+	depends on ARCH_OXNAS
-+	select PCIEPORTBUS
-+
- endmenu
---- a/drivers/pci/host/Makefile
-+++ b/drivers/pci/host/Makefile
-@@ -3,6 +3,7 @@ obj-$(CONFIG_PCI_DRA7XX) += pci-dra7xx.o
- obj-$(CONFIG_PCI_EXYNOS) += pci-exynos.o
- obj-$(CONFIG_PCI_IMX6) += pci-imx6.o
- obj-$(CONFIG_PCI_MVEBU) += pci-mvebu.o
-+obj-$(CONFIG_PCI_OXNAS) += pcie-oxnas.o
- obj-$(CONFIG_PCI_TEGRA) += pci-tegra.o
- obj-$(CONFIG_PCI_RCAR_GEN2) += pci-rcar-gen2.o
- obj-$(CONFIG_PCI_RCAR_GEN2_PCIE) += pcie-rcar.o
diff --git a/target/linux/oxnas/patches-4.4/350-oxnas-reset.patch b/target/linux/oxnas/patches-4.4/350-oxnas-reset.patch
deleted file mode 100644
index e9aaf4b430..0000000000
--- a/target/linux/oxnas/patches-4.4/350-oxnas-reset.patch
+++ /dev/null
@@ -1,20 +0,0 @@
---- a/drivers/reset/Kconfig
-+++ b/drivers/reset/Kconfig
-@@ -12,4 +12,9 @@ menuconfig RESET_CONTROLLER
- 
- 	  If unsure, say no.
- 
-+config RESET_CONTROLLER_OXNAS
-+	bool
-+	select RESET_CONTROLLER
-+
- source "drivers/reset/sti/Kconfig"
-+
---- a/drivers/reset/Makefile
-+++ b/drivers/reset/Makefile
-@@ -1,4 +1,5 @@
- obj-$(CONFIG_RESET_CONTROLLER) += core.o
-+obj-$(CONFIG_RESET_CONTROLLER_OXNAS) += reset-ox820.o
- obj-$(CONFIG_ARCH_LPC18XX) += reset-lpc18xx.o
- obj-$(CONFIG_ARCH_SOCFPGA) += reset-socfpga.o
- obj-$(CONFIG_ARCH_BERLIN) += reset-berlin.o
diff --git a/target/linux/oxnas/patches-4.4/400-oxnas-nand.patch b/target/linux/oxnas/patches-4.4/400-oxnas-nand.patch
deleted file mode 100644
index fbc3edbbe8..0000000000
--- a/target/linux/oxnas/patches-4.4/400-oxnas-nand.patch
+++ /dev/null
@@ -1,24 +0,0 @@
---- a/drivers/mtd/nand/Kconfig
-+++ b/drivers/mtd/nand/Kconfig
-@@ -563,4 +563,11 @@ config MTD_NAND_QCOM
- 	  Enables support for NAND flash chips on SoCs containing the EBI2 NAND
- 	  controller. This controller is found on IPQ806x SoC.
- 
-+config MTD_NAND_OXNAS
-+	tristate "Support for NAND on Plxtech NAS782X SoC"
-+	depends on ARCH_OXNAS
-+	help
-+	  Enables support for NAND Flash chips on Plxtech NAS782X SoCs. NAND is attached
-+	  to the STATIC Unit.
-+
- endif # MTD_NAND
---- a/drivers/mtd/nand/Makefile
-+++ b/drivers/mtd/nand/Makefile
-@@ -46,6 +46,7 @@ obj-$(CONFIG_MTD_NAND_SOCRATES)		+= socr
- obj-$(CONFIG_MTD_NAND_TXX9NDFMC)	+= txx9ndfmc.o
- obj-$(CONFIG_MTD_NAND_NUC900)		+= nuc900_nand.o
- obj-$(CONFIG_MTD_NAND_MPC5121_NFC)	+= mpc5121_nfc.o
-+obj-$(CONFIG_MTD_NAND_OXNAS)		+= oxnas_nand.o
- obj-$(CONFIG_MTD_NAND_VF610_NFC)	+= vf610_nfc.o
- obj-$(CONFIG_MTD_NAND_RICOH)		+= r852.o
- obj-$(CONFIG_MTD_NAND_JZ4740)		+= jz4740_nand.o
diff --git a/target/linux/oxnas/patches-4.4/500-oxnas-sata.patch b/target/linux/oxnas/patches-4.4/500-oxnas-sata.patch
deleted file mode 100644
index b833b635aa..0000000000
--- a/target/linux/oxnas/patches-4.4/500-oxnas-sata.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/ata/Kconfig
-+++ b/drivers/ata/Kconfig
-@@ -432,6 +432,13 @@ config SATA_VITESSE
- 
- 	  If unsure, say N.
- 
-+config SATA_OXNAS
-+	tristate "PLXTECH NAS782X SATA support"
-+	help
-+	  This option enables support for Nas782x Serial ATA controller.
-+
-+	  If unsure, say N.
-+
- comment "PATA SFF controllers with BMDMA"
- 
- config PATA_ALI
---- a/drivers/ata/Makefile
-+++ b/drivers/ata/Makefile
-@@ -40,6 +40,7 @@ obj-$(CONFIG_SATA_SVW)		+= sata_svw.o
- obj-$(CONFIG_SATA_ULI)		+= sata_uli.o
- obj-$(CONFIG_SATA_VIA)		+= sata_via.o
- obj-$(CONFIG_SATA_VITESSE)	+= sata_vsc.o
-+obj-$(CONFIG_SATA_OXNAS)	+= sata_oxnas.o
- 
- # SFF PATA w/ BMDMA
- obj-$(CONFIG_PATA_ALI)		+= pata_ali.o
diff --git a/target/linux/oxnas/patches-4.4/700-oxnas-dwmac.patch b/target/linux/oxnas/patches-4.4/700-oxnas-dwmac.patch
deleted file mode 100644
index 5de25d2e82..0000000000
--- a/target/linux/oxnas/patches-4.4/700-oxnas-dwmac.patch
+++ /dev/null
@@ -1,29 +0,0 @@
---- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
-+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
-@@ -69,6 +69,16 @@ config DWMAC_MESON
- 	  the stmmac device driver. This driver is used for Meson6 and
- 	  Meson8 SoCs.
- 
-+config DWMAC_OXNAS
-+	tristate "Oxnas gmac support"
-+	default ARCH_OXNAS
-+	depends on OF && ARCH_OXNAS
-+	help
-+	  Support for Ethernet controller on Oxnas SoCs.
-+
-+	  This selects the Oxford OX82x SoC glue layer support for
-+	  the stmmac device driver.
-+
- config DWMAC_ROCKCHIP
- 	tristate "Rockchip dwmac support"
- 	default ARCH_ROCKCHIP
---- a/drivers/net/ethernet/stmicro/stmmac/Makefile
-+++ b/drivers/net/ethernet/stmicro/stmmac/Makefile
-@@ -9,6 +9,7 @@ obj-$(CONFIG_STMMAC_PLATFORM)	+= stmmac-
- obj-$(CONFIG_DWMAC_IPQ806X)	+= dwmac-ipq806x.o
- obj-$(CONFIG_DWMAC_LPC18XX)	+= dwmac-lpc18xx.o
- obj-$(CONFIG_DWMAC_MESON)	+= dwmac-meson.o
-+obj-$(CONFIG_DWMAC_OXNAS)	+= dwmac-oxnas.o
- obj-$(CONFIG_DWMAC_ROCKCHIP)	+= dwmac-rk.o
- obj-$(CONFIG_DWMAC_SOCFPGA)	+= dwmac-socfpga.o
- obj-$(CONFIG_DWMAC_STI)		+= dwmac-sti.o
diff --git a/target/linux/oxnas/patches-4.4/800-oxnas-ehci.patch b/target/linux/oxnas/patches-4.4/800-oxnas-ehci.patch
deleted file mode 100644
index 7f26de6b14..0000000000
--- a/target/linux/oxnas/patches-4.4/800-oxnas-ehci.patch
+++ /dev/null
@@ -1,26 +0,0 @@
---- a/drivers/usb/host/Kconfig
-+++ b/drivers/usb/host/Kconfig
-@@ -315,6 +315,13 @@ config USB_OCTEON_EHCI
- 	  USB 2.0 device support.  All CN6XXX based chips with USB are
- 	  supported.
- 
-+config USB_EHCI_OXNAS
-+	tristate "OXNAS EHCI Module"
-+	depends on USB_EHCI_HCD && ARCH_OXNAS
-+	select USB_EHCI_ROOT_HUB_TT
-+	---help---
-+	  Enable support for the OX820 SOC's on-chip EHCI controller.
-+
- endif # USB_EHCI_HCD
- 
- config USB_OXU210HP_HCD
---- a/drivers/usb/host/Makefile
-+++ b/drivers/usb/host/Makefile
-@@ -41,6 +41,7 @@ obj-$(CONFIG_USB_EHCI_HCD_AT91) += ehci-
- obj-$(CONFIG_USB_EHCI_MSM)	+= ehci-msm.o
- obj-$(CONFIG_USB_EHCI_TEGRA)	+= ehci-tegra.o
- obj-$(CONFIG_USB_W90X900_EHCI)	+= ehci-w90x900.o
-+obj-$(CONFIG_USB_EHCI_OXNAS)	+= ehci-oxnas.o
- 
- obj-$(CONFIG_USB_OXU210HP_HCD)	+= oxu210hp-hcd.o
- obj-$(CONFIG_USB_ISP116X_HCD)	+= isp116x-hcd.o
diff --git a/target/linux/oxnas/patches-4.4/900-more-boards.patch b/target/linux/oxnas/patches-4.4/900-more-boards.patch
deleted file mode 100644
index f41fa8648e..0000000000
--- a/target/linux/oxnas/patches-4.4/900-more-boards.patch
+++ /dev/null
@@ -1,15 +0,0 @@
---- a/arch/arm/boot/dts/Makefile
-+++ b/arch/arm/boot/dts/Makefile
-@@ -497,7 +497,11 @@ dtb-$(CONFIG_ARCH_ORION5X) += \
- 	orion5x-lswsgl.dtb \
- 	orion5x-maxtor-shared-storage-2.dtb \
- 	orion5x-rd88f5182-nas.dtb
--dtb-$(CONFIG_ARCH_OXNAS) += ox820-pogoplug-pro.dtb
-+dtb-$(CONFIG_ARCH_OXNAS) += ox820-akitio.dtb \
-+	ox820-pogoplug-pro.dtb \
-+	ox820-pogoplug-v3.dtb \
-+	ox820-stg212.dtb \
-+	ox820-kd20.dtb
- dtb-$(CONFIG_ARCH_PRIMA2) += \
- 	prima2-evb.dtb
- dtb-$(CONFIG_ARCH_QCOM) += \
diff --git a/target/linux/oxnas/patches-4.4/996-ATAG_DTB_COMPAT_CMDLINE_MANGLE.patch b/target/linux/oxnas/patches-4.4/996-ATAG_DTB_COMPAT_CMDLINE_MANGLE.patch
deleted file mode 100644
index 6bffa6fe6a..0000000000
--- a/target/linux/oxnas/patches-4.4/996-ATAG_DTB_COMPAT_CMDLINE_MANGLE.patch
+++ /dev/null
@@ -1,185 +0,0 @@
-Author: Adrian Panella <ianchi74@outlook.com>
-Date:   Fri Jun 10 19:10:15 2016 -0500
-
-generic: Mangle bootloader's kernel arguments
-
-The command-line arguments provided by the boot loader will be
-appended to a new device tree property: bootloader-args.
-If there is a property "append-rootblock" in DT under /chosen
-and a root= option in bootloaders command line it will be parsed
-and added to DT bootargs with the form: <append-rootblock>XX.
-Only command line ATAG will be processed, the rest of the ATAGs
-sent by bootloader will be ignored.
-This is usefull in dual boot systems, to get the current root partition
-without afecting the rest of the system.
-
-
-Signed-off-by: Adrian Panella <ianchi74@outlook.com>
-
---- a/arch/arm/Kconfig
-+++ b/arch/arm/Kconfig
-@@ -1943,6 +1943,17 @@ config ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEN
- 	  The command-line arguments provided by the boot loader will be
- 	  appended to the the device tree bootargs property.
- 
-+config ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+	bool "Append rootblock parsing bootloader's kernel arguments"
-+	help
-+	  The command-line arguments provided by the boot loader will be
-+	  appended to a new device tree property: bootloader-args.
-+	  If there is a property "append-rootblock" in DT under /chosen 
-+	  and a root= option in bootloaders command line it will be parsed 
-+	  and added to DT bootargs with the form: <append-rootblock>XX.
-+	  Only command line ATAG will be processed, the rest of the ATAGs
-+	  sent by bootloader will be ignored.
-+
- endchoice
- 
- config CMDLINE
---- a/arch/arm/boot/compressed/atags_to_fdt.c
-+++ b/arch/arm/boot/compressed/atags_to_fdt.c
-@@ -3,6 +3,8 @@
- 
- #if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_EXTEND)
- #define do_extend_cmdline 1
-+#elif defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#define do_extend_cmdline 1
- #else
- #define do_extend_cmdline 0
- #endif
-@@ -66,6 +68,59 @@ static uint32_t get_cell_size(const void
- 	return cell_size;
- }
- 
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+
-+static char *append_rootblock(char *dest, const char *str, int len, void *fdt)
-+{
-+	char *ptr, *end;
-+	char *root="root=";
-+	int i, l;
-+	const char *rootblock;
-+
-+	//ARM doesn't have __HAVE_ARCH_STRSTR, so search manually
-+	ptr = str - 1;
-+
-+	do {
-+		//first find an 'r' at the begining or after a space
-+		do {
-+			ptr++;
-+			ptr = strchr(ptr, 'r');
-+			if(!ptr) return dest;
-+
-+		} while (ptr != str && *(ptr-1) != ' ');
-+
-+		//then check for the rest
-+		for(i = 1; i <= 4; i++)
-+			if(*(ptr+i) != *(root+i)) break;
-+
-+	} while (i != 5);
-+
-+	end = strchr(ptr, ' ');
-+	end = end ? (end - 1) : (strchr(ptr, 0) - 1);
-+
-+	//find partition number (assumes format root=/dev/mtdXX | /dev/mtdblockXX | yy:XX )
-+	for( i = 0; end >= ptr && *end >= '0' && *end <= '9'; end--, i++);
-+	ptr = end + 1;
-+
-+	/* if append-rootblock property is set use it to append to command line */
-+	rootblock = getprop(fdt, "/chosen", "append-rootblock", &l);
-+	if(rootblock != NULL) {
-+		if(*dest != ' ') {
-+			*dest = ' ';
-+			dest++;
-+			len++;
-+		}
-+		if (len + l + i <= COMMAND_LINE_SIZE) {
-+			memcpy(dest, rootblock, l);
-+			dest += l - 1;
-+			memcpy(dest, ptr, i);
-+			dest += i;
-+		}
-+	}
-+	return dest;
-+}
-+#endif
-+
- static void merge_fdt_bootargs(void *fdt, const char *fdt_cmdline)
- {
- 	char cmdline[COMMAND_LINE_SIZE];
-@@ -85,12 +140,21 @@ static void merge_fdt_bootargs(void *fdt
- 
- 	/* and append the ATAG_CMDLINE */
- 	if (fdt_cmdline) {
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+		//save original bootloader args
-+		//and append ubi.mtd with root partition number to current cmdline
-+		setprop_string(fdt, "/chosen", "bootloader-args", fdt_cmdline);
-+		ptr = append_rootblock(ptr, fdt_cmdline, len, fdt);
-+
-+#else
- 		len = strlen(fdt_cmdline);
- 		if (ptr - cmdline + len + 2 < COMMAND_LINE_SIZE) {
- 			*ptr++ = ' ';
- 			memcpy(ptr, fdt_cmdline, len);
- 			ptr += len;
- 		}
-+#endif
- 	}
- 	*ptr = '\0';
- 
-@@ -147,7 +211,9 @@ int atags_to_fdt(void *atag_list, void *
- 			else
- 				setprop_string(fdt, "/chosen", "bootargs",
- 					       atag->u.cmdline.cmdline);
--		} else if (atag->hdr.tag == ATAG_MEM) {
-+		}
-+#ifndef CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE
-+		else if (atag->hdr.tag == ATAG_MEM) {
- 			if (memcount >= sizeof(mem_reg_property)/4)
- 				continue;
- 			if (!atag->u.mem.size)
-@@ -186,6 +252,10 @@ int atags_to_fdt(void *atag_list, void *
- 		setprop(fdt, "/memory", "reg", mem_reg_property,
- 			4 * memcount * memsize);
- 	}
-+#else
-+
-+	}
-+#endif
- 
- 	return fdt_pack(fdt);
- }
---- a/init/main.c
-+++ b/init/main.c
-@@ -89,6 +89,10 @@
- #include <asm/sections.h>
- #include <asm/cacheflush.h>
- 
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+#include <linux/of.h>
-+#endif
-+
- static int kernel_init(void *);
- 
- extern void init_IRQ(void);
-@@ -562,6 +566,18 @@ asmlinkage __visible void __init start_k
- 	page_alloc_init();
- 
- 	pr_notice("Kernel command line: %s\n", boot_command_line);
-+
-+#if defined(CONFIG_ARM_ATAG_DTB_COMPAT_CMDLINE_MANGLE)
-+	//Show bootloader's original command line for reference
-+	if(of_chosen) {
-+		const char *prop = of_get_property(of_chosen, "bootloader-args", NULL);
-+		if(prop)
-+			pr_notice("Bootloader command line (ignored): %s\n", prop);
-+		else
-+			pr_notice("Bootloader command line not present\n");
-+	}
-+#endif
-+
- 	parse_early_param();
- 	after_dashes = parse_args("Booting kernel",
- 				  static_command_line, __start___param,
diff --git a/target/linux/oxnas/patches-4.4/999-libata-hacks.patch b/target/linux/oxnas/patches-4.4/999-libata-hacks.patch
deleted file mode 100644
index ac278ab234..0000000000
--- a/target/linux/oxnas/patches-4.4/999-libata-hacks.patch
+++ /dev/null
@@ -1,57 +0,0 @@
---- a/drivers/ata/libata-core.c
-+++ b/drivers/ata/libata-core.c
-@@ -1589,6 +1589,14 @@ unsigned ata_exec_internal_sg(struct ata
- 		return AC_ERR_SYSTEM;
- 	}
- 
-+	if (ap->ops->acquire_hw && !ap->ops->acquire_hw(ap, 0, 0)) {
-+		spin_unlock_irqrestore(ap->lock, flags);
-+		if (!ap->ops->acquire_hw(ap, 1, (2*HZ))) {
-+			return AC_ERR_TIMEOUT;
-+		}
-+		spin_lock_irqsave(ap->lock, flags);
-+	}
-+
- 	/* initialize internal qc */
- 
- 	/* XXX: Tag 0 is used for drivers with legacy EH as some
-@@ -4788,6 +4796,9 @@ struct ata_queued_cmd *ata_qc_new_init(s
- 	if (unlikely(ap->pflags & ATA_PFLAG_FROZEN))
- 		return NULL;
- 
-+	if (ap->ops->qc_new && ap->ops->qc_new(ap))
-+		return NULL;
-+
- 	/* libsas case */
- 	if (ap->flags & ATA_FLAG_SAS_HOST) {
- 		tag = ata_sas_allocate_tag(ap);
-@@ -4833,6 +4844,8 @@ void ata_qc_free(struct ata_queued_cmd *
- 		qc->tag = ATA_TAG_POISON;
- 		if (ap->flags & ATA_FLAG_SAS_HOST)
- 			ata_sas_free_tag(tag, ap);
-+		if (ap->ops->qc_free)
-+			ap->ops->qc_free(qc);
- 	}
- }
- 
---- a/include/linux/libata.h
-+++ b/include/linux/libata.h
-@@ -906,6 +906,8 @@ struct ata_port_operations {
- 	void (*qc_prep)(struct ata_queued_cmd *qc);
- 	unsigned int (*qc_issue)(struct ata_queued_cmd *qc);
- 	bool (*qc_fill_rtf)(struct ata_queued_cmd *qc);
-+	int (*qc_new)(struct ata_port *ap);
-+	void (*qc_free)(struct ata_queued_cmd *qc);
- 
- 	/*
- 	 * Configuration and exception handling
-@@ -996,6 +998,9 @@ struct ata_port_operations {
- 	void (*phy_reset)(struct ata_port *ap);
- 	void (*eng_timeout)(struct ata_port *ap);
- 
-+	int (*acquire_hw)(struct ata_port *ap, int may_sleep,
-+			  int timeout_jiffies);
-+
- 	/*
- 	 * ->inherits must be the last field and all the preceding
- 	 * fields must be pointers.
diff --git a/target/linux/oxnas/profiles/00-default.mk b/target/linux/oxnas/profiles/00-default.mk
deleted file mode 100644
index fedf730088..0000000000
--- a/target/linux/oxnas/profiles/00-default.mk
+++ /dev/null
@@ -1,21 +0,0 @@
-#
-# Copyright (C) 2016 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-define Profile/Default
-	NAME:=Default Profile
-	PRIORITY:=1
-	PACKAGES:=\
-		kmod-i2c-gpio kmod-gpio-beeper kmod-hwmon-core \
-		kmod-hwmon-gpiofan kmod-rtc-pcf8563 kmod-rtc-ds1307 \
-		kmod-usb3
-endef
-
-define Profile/Default/Description
-	Default package set compatible with most boards.
-endef
-
-$(eval $(call Profile,Default))
-- 
2.30.2