From 18166c1a50dc4f5b121ab2bd4fdf178404db9d99 Mon Sep 17 00:00:00 2001 From: Jean Delvare Date: Sun, 19 Aug 2007 12:03:07 +0200 Subject: [PATCH] PCI: Run k8t_sound_hostbridge quirk only when needed The k8t_sound_hostbridge PCI quick fires on my motherboard (Jetway K8M8MS) while it shouldn't: the on-board sound chip is not disabled and is working just fine. Looking at the code, I see that we are running the quirk for two distinct register values (0x88 and 0xc8) and then clear bit 6 (0x40). However value 0x88 already has bit 6 cleared so this is a no-op. This is what happens on my board. Thus I believe that the quirk should only be run for register value 0xc8. Signed-off-by: Jean Delvare Signed-off-by: Greg Kroah-Hartman --- drivers/pci/quirks.c | 2 +- 1 file changed, 1 insertion(+), 1 deletion(-) diff --git a/drivers/pci/quirks.c b/drivers/pci/quirks.c index 31f680f238c8..2d40f437b9fc 100644 --- a/drivers/pci/quirks.c +++ b/drivers/pci/quirks.c @@ -947,7 +947,7 @@ static void k8t_sound_hostbridge(struct pci_dev *dev) unsigned char val; pci_read_config_byte(dev, 0x50, &val); - if (val == 0x88 || val == 0xc8) { + if (val == 0xc8) { /* Assume it's probably a MSI-K8T-Neo2Fir */ printk(KERN_INFO "PCI: MSI-K8T-Neo2Fir, attempting to turn soundcard ON\n"); pci_write_config_byte(dev, 0x50, val & (~0x40)); -- 2.30.2