From 197c62832b1a347f933fea286fc70266026ef5fb Mon Sep 17 00:00:00 2001 From: Luciano Coelho Date: Thu, 10 May 2012 12:13:07 +0300 Subject: [PATCH] wlcore_sdio/wl18xx: use SDIO revision number to identify wl18xx chips At least in PG1, the wl18xx chips use the same SDIO vendor/device ID, so it's not possible to figure out which driver is to be used. As a workaround, we can check the SDIO revision number, because wl18xx uses 3.00 and wl12xx does not. Signed-off-by: Luciano Coelho Signed-off-by: Arik Nemtsov --- drivers/net/wireless/ti/wlcore/sdio.c | 15 ++++++++++++++- 1 file changed, 14 insertions(+), 1 deletion(-) diff --git a/drivers/net/wireless/ti/wlcore/sdio.c b/drivers/net/wireless/ti/wlcore/sdio.c index 0a72347cfc4c..1082e394e8f7 100644 --- a/drivers/net/wireless/ti/wlcore/sdio.c +++ b/drivers/net/wireless/ti/wlcore/sdio.c @@ -25,6 +25,7 @@ #include #include #include +#include #include #include #include @@ -196,6 +197,7 @@ static int __devinit wl1271_probe(struct sdio_func *func, struct resource res[1]; mmc_pm_flag_t mmcflags; int ret = -ENOMEM; + const char *chip_family; /* We are only able to handle the wlan function */ if (func->num != 0x02) @@ -236,7 +238,18 @@ static int __devinit wl1271_probe(struct sdio_func *func, /* Tell PM core that we don't need the card to be powered now */ pm_runtime_put_noidle(&func->dev); - glue->core = platform_device_alloc("wl12xx", -1); + /* + * Due to a hardware bug, we can't differentiate wl18xx from + * wl12xx, because both report the same device ID. The only + * way to differentiate is by checking the SDIO revision, + * which is 3.00 on the wl18xx chips. + */ + if (func->card->cccr.sdio_vsn == SDIO_SDIO_REV_3_00) + chip_family = "wl18xx"; + else + chip_family = "wl12xx"; + + glue->core = platform_device_alloc(chip_family, -1); if (!glue->core) { dev_err(glue->dev, "can't allocate platform_device"); ret = -ENOMEM; -- 2.30.2