From 1c0eaf0f56d6128af7f0f252855173fcee85d202 Mon Sep 17 00:00:00 2001 From: Benjamin Herrenschmidt Date: Fri, 30 Jun 2017 17:37:32 -0500 Subject: [PATCH] powerpc/powernv: Tell OPAL about our MMU mode on POWER9 That will allow OPAL to configure the CPU in an optimal way. Signed-off-by: Benjamin Herrenschmidt Signed-off-by: Michael Neuling Signed-off-by: Michael Ellerman --- arch/powerpc/include/asm/opal-api.h | 9 +++++++++ arch/powerpc/platforms/powernv/opal.c | 19 +++++++++++++++++-- arch/powerpc/platforms/powernv/setup.c | 11 ++++++++++- 3 files changed, 36 insertions(+), 3 deletions(-) diff --git a/arch/powerpc/include/asm/opal-api.h b/arch/powerpc/include/asm/opal-api.h index ef930ba500f9..3130a73652c7 100644 --- a/arch/powerpc/include/asm/opal-api.h +++ b/arch/powerpc/include/asm/opal-api.h @@ -876,6 +876,15 @@ struct OpalIoPhb4ErrorData { enum { OPAL_REINIT_CPUS_HILE_BE = (1 << 0), OPAL_REINIT_CPUS_HILE_LE = (1 << 1), + + /* These two define the base MMU mode of the host on P9 + * + * On P9 Nimbus DD2.0 and Cumlus (and later), KVM can still + * create hash guests in "radix" mode with care (full core + * switch only). + */ + OPAL_REINIT_CPUS_MMU_HASH = (1 << 2), + OPAL_REINIT_CPUS_MMU_RADIX = (1 << 3), }; typedef struct oppanel_line { diff --git a/arch/powerpc/platforms/powernv/opal.c b/arch/powerpc/platforms/powernv/opal.c index 59684b4af4d1..9b87abb178f0 100644 --- a/arch/powerpc/platforms/powernv/opal.c +++ b/arch/powerpc/platforms/powernv/opal.c @@ -59,6 +59,8 @@ static struct task_struct *kopald_tsk; void opal_configure_cores(void) { + u64 reinit_flags = 0; + /* Do the actual re-init, This will clobber all FPRs, VRs, etc... * * It will preserve non volatile GPRs and HSPRG0/1. It will @@ -66,11 +68,24 @@ void opal_configure_cores(void) * but it might clobber a bunch. */ #ifdef __BIG_ENDIAN__ - opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_BE); + reinit_flags |= OPAL_REINIT_CPUS_HILE_BE; #else - opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_LE); + reinit_flags |= OPAL_REINIT_CPUS_HILE_LE; #endif + /* + * POWER9 always support running hash: + * ie. Host hash supports hash guests + * Host radix supports hash/radix guests + */ + if (cpu_has_feature(CPU_FTR_ARCH_300)) { + reinit_flags |= OPAL_REINIT_CPUS_MMU_HASH; + if (early_radix_enabled()) + reinit_flags |= OPAL_REINIT_CPUS_MMU_RADIX; + } + + opal_reinit_cpus(reinit_flags); + /* Restore some bits */ if (cur_cpu_spec->cpu_restore) cur_cpu_spec->cpu_restore(); diff --git a/arch/powerpc/platforms/powernv/setup.c b/arch/powerpc/platforms/powernv/setup.c index 2dc7e5fb86c3..897aa1400eb8 100644 --- a/arch/powerpc/platforms/powernv/setup.c +++ b/arch/powerpc/platforms/powernv/setup.c @@ -225,6 +225,8 @@ static void pnv_kexec_wait_secondaries_down(void) static void pnv_kexec_cpu_down(int crash_shutdown, int secondary) { + u64 reinit_flags; + if (xive_enabled()) xive_kexec_teardown_cpu(secondary); else @@ -254,8 +256,15 @@ static void pnv_kexec_cpu_down(int crash_shutdown, int secondary) * We might be running as little-endian - now that interrupts * are disabled, reset the HILE bit to big-endian so we don't * take interrupts in the wrong endian later + * + * We reinit to enable both radix and hash on P9 to ensure + * the mode used by the next kernel is always supported. */ - opal_reinit_cpus(OPAL_REINIT_CPUS_HILE_BE); + reinit_flags = OPAL_REINIT_CPUS_HILE_BE; + if (cpu_has_feature(CPU_FTR_ARCH_300)) + reinit_flags |= OPAL_REINIT_CPUS_MMU_RADIX | + OPAL_REINIT_CPUS_MMU_HASH; + opal_reinit_cpus(reinit_flags); } } #endif /* CONFIG_KEXEC_CORE */ -- 2.30.2