From 1efb92a306f08119c81de148b05afc24446b8d7a Mon Sep 17 00:00:00 2001 From: Hai Li Date: Fri, 22 May 2015 10:16:46 -0400 Subject: [PATCH] drm/msm/mdp5: Always generate active-high sync signals for DSI DSI video mode engine can only take active-high sync signals. This change prevents MDP5 sending active-low sync signals to DSI in any case. Signed-off-by: Hai Li Tested-by: Archit Taneja Signed-off-by: Rob Clark --- drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c | 12 ++++++++---- 1 file changed, 8 insertions(+), 4 deletions(-) diff --git a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c index 84d0a7b92918..de97c08f3f1f 100644 --- a/drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c +++ b/drivers/gpu/drm/msm/mdp/mdp5/mdp5_encoder.c @@ -144,10 +144,14 @@ static void mdp5_encoder_mode_set(struct drm_encoder *encoder, mode->type, mode->flags); ctrl_pol = 0; - if (mode->flags & DRM_MODE_FLAG_NHSYNC) - ctrl_pol |= MDP5_INTF_POLARITY_CTL_HSYNC_LOW; - if (mode->flags & DRM_MODE_FLAG_NVSYNC) - ctrl_pol |= MDP5_INTF_POLARITY_CTL_VSYNC_LOW; + + /* DSI controller cannot handle active-low sync signals. */ + if (mdp5_encoder->intf.type != INTF_DSI) { + if (mode->flags & DRM_MODE_FLAG_NHSYNC) + ctrl_pol |= MDP5_INTF_POLARITY_CTL_HSYNC_LOW; + if (mode->flags & DRM_MODE_FLAG_NVSYNC) + ctrl_pol |= MDP5_INTF_POLARITY_CTL_VSYNC_LOW; + } /* probably need to get DATA_EN polarity from panel.. */ dtv_hsync_skew = 0; /* get this from panel? */ -- 2.30.2