From 2104035214b51d007db7e040906550eb608aaa44 Mon Sep 17 00:00:00 2001 From: Andrew Lunn Date: Sat, 17 Nov 2012 09:51:06 +0100 Subject: [PATCH] ARM: Kirkwood: Convert IB62x0 to use gpio-poweroff. Signed-off-by: Andrew Lunn Tested-by: Simon Baatz Signed-off-by: Jason Cooper --- arch/arm/boot/dts/kirkwood-ib62x0.dts | 6 ++++++ arch/arm/mach-kirkwood/board-ib62x0.c | 13 ------------- 2 files changed, 6 insertions(+), 13 deletions(-) diff --git a/arch/arm/boot/dts/kirkwood-ib62x0.dts b/arch/arm/boot/dts/kirkwood-ib62x0.dts index 66794ed75ff1..6a9558d24da2 100644 --- a/arch/arm/boot/dts/kirkwood-ib62x0.dts +++ b/arch/arm/boot/dts/kirkwood-ib62x0.dts @@ -79,4 +79,10 @@ gpios = <&gpio0 27 0>; }; }; + gpio_poweroff { + compatible = "gpio-poweroff"; + gpios = <&gpio0 24 0>; + }; + + }; diff --git a/arch/arm/mach-kirkwood/board-ib62x0.c b/arch/arm/mach-kirkwood/board-ib62x0.c index db08e379a40a..2a58b4fc453b 100644 --- a/arch/arm/mach-kirkwood/board-ib62x0.c +++ b/arch/arm/mach-kirkwood/board-ib62x0.c @@ -17,7 +17,6 @@ #include #include #include -#include #include #include #include @@ -25,8 +24,6 @@ #include "common.h" #include "mpp.h" -#define IB62X0_GPIO_POWER_OFF 24 - static struct mv643xx_eth_platform_data ib62x0_ge00_data = { .phy_addr = MV643XX_ETH_PHY_ADDR(8), }; @@ -49,11 +46,6 @@ static unsigned int ib62x0_mpp_config[] __initdata = { 0 }; -static void ib62x0_power_off(void) -{ - gpio_set_value(IB62X0_GPIO_POWER_OFF, 1); -} - void __init ib62x0_init(void) { /* @@ -62,9 +54,4 @@ void __init ib62x0_init(void) kirkwood_mpp_conf(ib62x0_mpp_config); kirkwood_ge00_init(&ib62x0_ge00_data); - if (gpio_request(IB62X0_GPIO_POWER_OFF, "ib62x0:power:off") == 0 && - gpio_direction_output(IB62X0_GPIO_POWER_OFF, 0) == 0) - pm_power_off = ib62x0_power_off; - else - pr_err("board-ib62x0: failed to configure power-off GPIO\n"); } -- 2.30.2