From 2695eab964efaa382168e0351705967bd9deb7ea Mon Sep 17 00:00:00 2001 From: Joakim Tjernlund Date: Thu, 19 Nov 2009 12:01:58 +0100 Subject: [PATCH] mtd: CFI cmdset_0002: enable erase-suspend-program Erase-suspend for writing is required to avoid blocking applications that wish to write some data (to a NOR block other than the one being erased). Particularly, it solves some huge delays that an application (which writes to a UBIFS) will experience if UBI attaches to empty NOR flash. In this case the UBI background thread will erase a lot of blocks and the application can be blocked for minutes because of the "MTD/CFI chip lock". This feature has been disabled for years. Maybe this was because the old code turned it on for erase-suspend read-only chips also (cfip->EraseSuspend & 0x1). This is wrong and corrected now. This patch was tweaked by Norbert van Bolhuis. Signed-off-by: Norbert van Bolhuis Signed-off-by: Artem Bityutskiy Signed-off-by: David Woodhouse --- drivers/mtd/chips/cfi_cmdset_0002.c | 16 +++------------- 1 file changed, 3 insertions(+), 13 deletions(-) diff --git a/drivers/mtd/chips/cfi_cmdset_0002.c b/drivers/mtd/chips/cfi_cmdset_0002.c index 94bb61e19047..1d49e18adbf6 100644 --- a/drivers/mtd/chips/cfi_cmdset_0002.c +++ b/drivers/mtd/chips/cfi_cmdset_0002.c @@ -490,10 +490,6 @@ static struct mtd_info *cfi_amdstd_setup(struct mtd_info *mtd) } #endif - /* FIXME: erase-suspend-program is broken. See - http://lists.infradead.org/pipermail/linux-mtd/2003-December/009001.html */ - printk(KERN_NOTICE "cfi_cmdset_0002: Disabling erase-suspend-program due to code brokenness.\n"); - __module_get(THIS_MODULE); return mtd; @@ -589,15 +585,9 @@ static int get_chip(struct map_info *map, struct flchip *chip, unsigned long adr return 0; case FL_ERASING: - if (mode == FL_WRITING) /* FIXME: Erase-suspend-program appears broken. */ - goto sleep; - - if (!( mode == FL_READY - || mode == FL_POINT - || !cfip - || (mode == FL_WRITING && (cfip->EraseSuspend & 0x2)) - || (mode == FL_WRITING && (cfip->EraseSuspend & 0x1) - ))) + if (!cfip || !(cfip->EraseSuspend & (0x1|0x2)) || + !(mode == FL_READY || mode == FL_POINT || + (mode == FL_WRITING && (cfip->EraseSuspend & 0x2)))) goto sleep; /* We could check to see if we're trying to access the sector -- 2.30.2