From 281e8b2fdf8e4ef366b899453cae50e09b577ada Mon Sep 17 00:00:00 2001 From: Amir Vadai Date: Wed, 17 Feb 2016 17:24:22 +0200 Subject: [PATCH] net/mlx4_en: Count HW buffer overrun only once RdropOvflw counts overrun of HW buffer, therefore should be used for rx_fifo_errors only. Currently RdropOvflw counter is mistakenly also set into rx_missed_errors and rx_over_errors too, which makes the device total dropped packets accounting to show wrong results. Fix that. Use it for rx_fifo_errors only. Fixes: c27a02cd94d6 ('mlx4_en: Add driver for Mellanox ConnectX 10GbE NIC') Signed-off-by: Amir Vadai Signed-off-by: Eugenia Emantayev Signed-off-by: Or Gerlitz Signed-off-by: David S. Miller --- drivers/net/ethernet/mellanox/mlx4/en_port.c | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/drivers/net/ethernet/mellanox/mlx4/en_port.c b/drivers/net/ethernet/mellanox/mlx4/en_port.c index ee99e67187f5..3904b5fc0b7c 100644 --- a/drivers/net/ethernet/mellanox/mlx4/en_port.c +++ b/drivers/net/ethernet/mellanox/mlx4/en_port.c @@ -238,11 +238,11 @@ int mlx4_en_DUMP_ETH_STATS(struct mlx4_en_dev *mdev, u8 port, u8 reset) stats->collisions = 0; stats->rx_dropped = be32_to_cpu(mlx4_en_stats->RDROP); stats->rx_length_errors = be32_to_cpu(mlx4_en_stats->RdropLength); - stats->rx_over_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw); + stats->rx_over_errors = 0; stats->rx_crc_errors = be32_to_cpu(mlx4_en_stats->RCRC); stats->rx_frame_errors = 0; stats->rx_fifo_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw); - stats->rx_missed_errors = be32_to_cpu(mlx4_en_stats->RdropOvflw); + stats->rx_missed_errors = 0; stats->tx_aborted_errors = 0; stats->tx_carrier_errors = 0; stats->tx_fifo_errors = 0; -- 2.30.2